[U-Boot] Please pull u-boot-mpc85xx master

[York Sun]

Tom,

The following changes since commit 557a3319089499aa0e55d65a6b43b7137f362003:

  Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-13 17:09:28
-0400)

are available in the git repository at:


  git://git.denx.de/u-boot-mpc85xx.git master

for you to fetch changes up to e4911815cf98237b65a817a3c791f143794f2837:

  powerpc/srio-pcie-boot: Adjust addresses for SRIO/PCIE boot (2014-05-16
16:29:16 -0500)

----------------------------------------------------------------
Aneesh Bansal (1):
      powerpc/mpc85xx: SECURE BOOT- corrected CSPR settings for BSC9132QDS NAND

Chunhe Lan (3):
      net: phy/vitesse: Add support for VSC8664 phy module
      fsl/pci: Add workaround for erratum A-005434
      powerpc/85xx: Add T4160RDB board support

Ebony Zhu (1):
      board/freescale: Move CRC32 offset in NXID v1 data format

Kim Phillips (1):
      mpc85xx: configs: remove c=ffe from default environment

Liu Gang (1):
      powerpc/srio-pcie-boot: Adjust addresses for SRIO/PCIE boot

Nikhil Badola (1):
      drivers/usb : Define usb control register mask for w1c bits

Prabhakar Kushwaha (1):
      board/p1_p2_rdb:Enable p1_p2_rdb boot from NAND/SD/SPI in SPL

Shaveta Leekha (1):
      powerpc/mpc85xx: Added B4460 support

Tang Yuantian (1):
      powerpc/t104xrdb: Toggle deep sleep management signals after resume

ramneek mehresh (1):
      mpc85xx/p1020:Define number of USB controllers used on P1020RDB-PD platform

 arch/powerpc/cpu/mpc85xx/cmd_errata.c          |    3 +
 arch/powerpc/cpu/mpc8xxx/cpu.c                 |    1 +
 arch/powerpc/include/asm/config_mpc85xx.h      |    3 +
 arch/powerpc/include/asm/processor.h           |    1 +
 board/freescale/common/sys_eeprom.c            |    7 +-
 board/freescale/p1_p2_rdb/Makefile             |   21 +-
 board/freescale/p1_p2_rdb/ddr.c                |   16 +-
 board/freescale/p1_p2_rdb/spl.c                |  141 +++++++++++++
 board/freescale/p1_p2_rdb/spl_minimal.c        |   84 ++++++++
 board/freescale/p1_p2_rdb/tlb.c                |   18 +-
 board/freescale/t104xrdb/t104xrdb.c            |    2 +
 boards.cfg                                     |    1 +
 drivers/net/phy/vitesse.c                      |   46 ++++
 drivers/pci/fsl_pci_init.c                     |    9 +-
 drivers/usb/host/ehci-fsl.c                    |   15 +-
 include/configs/B4860QDS.h                     |   13 +-
 include/configs/BSC9132QDS.h                   |    2 +-
 include/configs/P1_P2_RDB.h                    |  265 ++++++++++++++++--------
 include/configs/P2041RDB.h                     |   13 +-
 include/configs/T1040QDS.h                     |    3 +-
 include/configs/T104xRDB.h                     |    3 +-
 include/configs/T208xQDS.h                     |   13 +-
 include/configs/T208xRDB.h                     |   13 +-
 include/configs/T4240EMU.h                     |    3 +-
 include/configs/T4240QDS.h                     |   13 +-
 include/configs/T4240RDB.h                     |    4 +
 include/configs/corenet_ds.h                   |   13 +-
 include/configs/p1_p2_rdb_pc.h                 |    4 +
 include/usb/ehci-fsl.h                         |    2 +
 nand_spl/board/freescale/p1_p2_rdb/Makefile    |   91 --------
 nand_spl/board/freescale/p1_p2_rdb/nand_boot.c |   82 --------
 31 files changed, 578 insertions(+), 327 deletions(-)
 create mode 100644 board/freescale/p1_p2_rdb/spl.c
 create mode 100644 board/freescale/p1_p2_rdb/spl_minimal.c
 delete mode 100644 nand_spl/board/freescale/p1_p2_rdb/Makefile
 delete mode 100644 nand_spl/board/freescale/p1_p2_rdb/nand_boot.c

Thanks,

York