[U-Boot] [PATCH 0/8] kmp204x patches for 2014.07

[York Sun]

On 04/30/2014 08:01 AM, Valentin Longchamp wrote:
> Things have stabilized quite a lot on the u-boot front for the Keymile
> kmp204x/kmcoge4 board. There are a few remaining patches that should get
> merged to have a complete support of the architecture/board in u-boot.
> These include:
>  - support for some additional functions of the QRIO board reset/control
>    CPLD (LEDs, Factory Test signal)
>  - better reset sequence according to the tests/problems noticed during
>    the development
>  - an update to the RCW (some external interrupts are unused and set as
>    GPIOs now)
>  - an additionnal workaround in the PBL file (with an implementation
>    enhancement for a previous one).
> 
> 
> Stefan Bigler (2):
>   kmp204x: Add support for the unit LEDs
>   kmp204x: handle dip-switch for factory settings
> 
> Valentin Longchamp (6):
>   kmp204x: selftest/factory test pin support
>   kmp204x: update the CONFIG_PRAM and CONFIG_KM_RESERVED_PRAM defines
>   kmp204x: complete the reset sequence and PRST configuration
>   kmp204x: update the RCW
>   kmp204x: add workaround for A-004849
>   kmp204x: enable the errata command
> 
>  board/keymile/kmp204x/kmp204x.c       | 75 ++++++++++++++++++++++++++++++-----
>  board/keymile/kmp204x/kmp204x.h       |  3 ++
>  board/keymile/kmp204x/pbi.cfg         | 43 +++++++++++++++++---
>  board/keymile/kmp204x/pci.c           | 17 ++++----
>  board/keymile/kmp204x/qrio.c          | 29 +++++++++++++-
>  board/keymile/kmp204x/rcw_kmp204x.cfg |  2 +-
>  include/configs/km/kmp204x-common.h   | 17 ++++----
>  7 files changed, 151 insertions(+), 35 deletions(-)
> 

Applied to u-boot-mpc85xx/master.

Thanks,

York