[U-Boot] [PATCH 2/3] board: ti: am43xx: add support for AM43xx Starter Kit

[Felipe Balbi]

AM43xx Starter Kit is a new board based on
AM437x line of SoCs. Being a low-cost EVM and
small size EVM are intended to provide an entry
level development platform on a full fledged
Hardware System.

Signed-off-by: Felipe Balbi <balbi at ti.com>
---
 board/ti/am43xx/board.c      | 7 +++++--
 board/ti/am43xx/board.h      | 5 +++++
 include/configs/am43xx_evm.h | 2 ++
 3 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 24097b0..05546ac 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -244,7 +244,7 @@ void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
 	if (board_is_eposevm()) {
 		*regs = ext_phy_ctrl_const_base_lpddr2;
 		*size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2);
-	} else if (board_is_gpevm()) {
+	} else if (board_is_gpevm() || board_is_sk()) {
 		*regs = ext_phy_ctrl_const_base_ddr3;
 		*size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3);
 	}
@@ -263,7 +263,7 @@ const struct dpll_params *get_dpll_ddr_params(void)
 
 	if (board_is_eposevm())
 		return &epos_evm_dpll_ddr;
-	else if (board_is_gpevm())
+	else if (board_is_gpevm() || board_is_sk())
 		return &gp_evm_dpll_ddr;
 
 	printf(" Board '%s' not supported\n", am43xx_board_name);
@@ -373,6 +373,9 @@ void sdram_init(void)
 		enable_vtt_regulator();
 		config_ddr(0, &ioregs_ddr3, NULL, NULL,
 			   &ddr3_emif_regs_400Mhz, 0);
+	} else if (board_is_sk()) {
+		config_ddr(0, &ioregs_ddr3, NULL, NULL,
+			   &ddr3_emif_regs_400Mhz, 0);
 	}
 }
 #endif
diff --git a/board/ti/am43xx/board.h b/board/ti/am43xx/board.h
index 091162e..017047d 100644
--- a/board/ti/am43xx/board.h
+++ b/board/ti/am43xx/board.h
@@ -47,6 +47,11 @@ static inline int board_is_gpevm(void)
 	return !strncmp(am43xx_board_name, "AM43__GP", HDR_NAME_LEN);
 }
 
+static inline int board_is_sk(void)
+{
+	return !strncmp(am43xx_board_name, "AM43__SK", HDR_NAME_LEN);
+}
+
 void enable_uart0_pin_mux(void);
 void enable_board_pin_mux(void);
 void enable_i2c0_pin_mux(void);
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 614857d..d7866ff 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -196,6 +196,8 @@
 			"setenv fdtfile am43x-epos-evm.dtb; fi; " \
 		"if test $board_name = AM43__GP; then " \
 			"setenv fdtfile am437x-gp-evm.dtb; fi; " \
+		"if test $board_name = AM43__SK; then " \
+			"setenv fdtfile am437x-sk-evm.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree; fi; \0"
 
-- 
2.0.0.rc1