[U-Boot] [PATCH v3 0/12] Enable LCD display on snow

[Simon Glass]

+Minkyu

Hi Tom,

On 22 May 2014 08:37, Tom Rini <trini at ti.com> wrote:
> On Tue, May 20, 2014 at 06:01:31AM -0600, Simon Glass wrote:
>
>> This series adds a driver for TPS65090 and plumbs it in to get the LCD
>> working correctly on snow.
>>
>> The display driver is already present, but needs information about the
>> display to be provided in the device tree.
>>
>> The backlight also needs to be enabled - it is controlled by a FET on
>> the TPS65090. Note that the TPS65090 is controlled by the device tree
>> so will only be present if the board's device tree file specifies it.
>> At present this is only the case for snow, but other exynos5 boards will
>> use it (e.g. pit).
>>
>> Note: the TPS65090 driver was sent to the list around the middle of last
>> year but was never applied.
>
> Looks fine to me, I would expect all of this to come via the samsung
> tree then arm.  Thanks!

OK understood, that will include the power and initcall tweaks also.

Regards,
Simon