[U-Boot] [PATCH 1/2] siemens:cosmetic, dxr2: rename dxr2 to draco
Samuel Egli
samuel.egli at siemens.com
Mon May 5 16:50:43 CEST 2014
The actual board name is draco and dxr2 is the target name.
In the future we'll have different targets based on draco board.
All changes are purely non-functional and basically rename dxr2
to draco.
One style fix in board.c that existed already before.
Signed-off-by: Samuel Egli <samuel.egli at siemens.com>
Reviewed-by: Roger Meier <r.meier at siemens.com>
Cc: Heiko Schocher <hs at denx.de>
Cc: Wolfgang Denk <wd at denx.de>
---
board/siemens/{dxr2 => draco}/Makefile | 0
board/siemens/{dxr2 => draco}/board.c | 71 ++++++++++++++++----------------
board/siemens/{dxr2 => draco}/board.h | 2 +-
board/siemens/{dxr2 => draco}/mux.c | 2 +-
boards.cfg | 2 +-
5 files changed, 38 insertions(+), 39 deletions(-)
rename board/siemens/{dxr2 => draco}/Makefile (100%)
rename board/siemens/{dxr2 => draco}/board.c (77%)
rename board/siemens/{dxr2 => draco}/board.h (98%)
rename board/siemens/{dxr2 => draco}/mux.c (99%)
diff --git a/board/siemens/dxr2/Makefile b/board/siemens/draco/Makefile
similarity index 100%
rename from board/siemens/dxr2/Makefile
rename to board/siemens/draco/Makefile
diff --git a/board/siemens/dxr2/board.c b/board/siemens/draco/board.c
similarity index 77%
rename from board/siemens/dxr2/board.c
rename to board/siemens/draco/board.c
index e9f157a..9be2e34 100644
--- a/board/siemens/dxr2/board.c
+++ b/board/siemens/draco/board.c
@@ -1,5 +1,5 @@
/*
- * Board functions for TI AM335X based dxr2 board
+ * Board functions for TI AM335X based draco board
* (C) Copyright 2013 Siemens Schweiz AG
* (C) Heiko Schocher, DENX Software Engineering, hs at denx.de.
*
@@ -37,7 +37,7 @@
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_BUILD
-static struct dxr2_baseboard_id __attribute__((section(".data"))) settings;
+static struct draco_baseboard_id __attribute__((section(".data"))) settings;
#if DDR_PLL_FREQ == 303
/* Default at 303MHz-i0 */
@@ -138,11 +138,10 @@ static int read_eeprom(void)
set_default_ddr3_timings();
}
- if (MAGIC_CHIP == settings.chip.magic) {
+ if (MAGIC_CHIP == settings.chip.magic)
print_chip_data();
- } else {
+ else
printf("Warning: No chip data in eeprom\n");
- }
print_ddr3_timings();
#endif
@@ -152,48 +151,48 @@ static int read_eeprom(void)
#ifdef CONFIG_SPL_BUILD
static void board_init_ddr(void)
{
-struct emif_regs dxr2_ddr3_emif_reg_data = {
+struct emif_regs draco_ddr3_emif_reg_data = {
.zq_config = 0x50074BE4,
};
-struct ddr_data dxr2_ddr3_data = {
+struct ddr_data draco_ddr3_data = {
};
-struct cmd_control dxr2_ddr3_cmd_ctrl_data = {
+struct cmd_control draco_ddr3_cmd_ctrl_data = {
};
-struct ctrl_ioregs dxr2_ddr3_ioregs = {
+struct ctrl_ioregs draco_ddr3_ioregs = {
};
/* pass values from eeprom */
- dxr2_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1;
- dxr2_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2;
- dxr2_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3;
- dxr2_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 =
+ draco_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1;
+ draco_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2;
+ draco_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3;
+ draco_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 =
settings.ddr3.emif_ddr_phy_ctlr_1;
- dxr2_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config;
- dxr2_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl;
-
- dxr2_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0;
- dxr2_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0;
- dxr2_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0;
- dxr2_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0;
-
- dxr2_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio;
- dxr2_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout;
- dxr2_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio;
- dxr2_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout;
- dxr2_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio;
- dxr2_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout;
-
- dxr2_ddr3_ioregs.cm0ioctl = settings.ddr3.ioctr_val,
- dxr2_ddr3_ioregs.cm1ioctl = settings.ddr3.ioctr_val,
- dxr2_ddr3_ioregs.cm2ioctl = settings.ddr3.ioctr_val,
- dxr2_ddr3_ioregs.dt0ioctl = settings.ddr3.ioctr_val,
- dxr2_ddr3_ioregs.dt1ioctl = settings.ddr3.ioctr_val,
-
- config_ddr(DDR_PLL_FREQ, &dxr2_ddr3_ioregs, &dxr2_ddr3_data,
- &dxr2_ddr3_cmd_ctrl_data, &dxr2_ddr3_emif_reg_data, 0);
+ draco_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config;
+ draco_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl;
+
+ draco_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0;
+ draco_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0;
+ draco_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0;
+ draco_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0;
+
+ draco_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio;
+ draco_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout;
+ draco_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio;
+ draco_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout;
+ draco_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio;
+ draco_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout;
+
+ draco_ddr3_ioregs.cm0ioctl = settings.ddr3.ioctr_val,
+ draco_ddr3_ioregs.cm1ioctl = settings.ddr3.ioctr_val,
+ draco_ddr3_ioregs.cm2ioctl = settings.ddr3.ioctr_val,
+ draco_ddr3_ioregs.dt0ioctl = settings.ddr3.ioctr_val,
+ draco_ddr3_ioregs.dt1ioctl = settings.ddr3.ioctr_val,
+
+ config_ddr(DDR_PLL_FREQ, &draco_ddr3_ioregs, &draco_ddr3_data,
+ &draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0);
}
static void spl_siemens_board_init(void)
diff --git a/board/siemens/dxr2/board.h b/board/siemens/draco/board.h
similarity index 98%
rename from board/siemens/dxr2/board.h
rename to board/siemens/draco/board.h
index a59ffb0..ff8ab76 100644
--- a/board/siemens/dxr2/board.h
+++ b/board/siemens/draco/board.h
@@ -50,7 +50,7 @@ struct chip_data {
char shwver[7];
};
-struct dxr2_baseboard_id {
+struct draco_baseboard_id {
struct ddr3_data ddr3;
struct chip_data chip;
};
diff --git a/board/siemens/dxr2/mux.c b/board/siemens/draco/mux.c
similarity index 99%
rename from board/siemens/dxr2/mux.c
rename to board/siemens/draco/mux.c
index f2314b5..eaa3c70 100644
--- a/board/siemens/dxr2/mux.c
+++ b/board/siemens/draco/mux.c
@@ -1,5 +1,5 @@
/*
- * pinmux setup for siemens dxr2 board
+ * pinmux setup for siemens draco board
*
* (C) Copyright 2013 Siemens Schweiz AG
* (C) Heiko Schocher, DENX Software Engineering, hs at denx.de.
diff --git a/boards.cfg b/boards.cfg
index b4203f1..76c8764 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -260,7 +260,7 @@ Active arm armv7 am33xx compulab cm_t335
Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <eballetbo at iseebcn.com>
Active arm armv7 am33xx phytec pcm051 pcm051_rev1 pcm051:REV1 Lars Poeschel <poeschel at lemonage.de>
Active arm armv7 am33xx phytec pcm051 pcm051_rev3 pcm051:REV3 Lars Poeschel <poeschel at lemonage.de>
-Active arm armv7 am33xx siemens dxr2 dxr2 - Roger Meier <r.meier at siemens.com>
+Active arm armv7 am33xx siemens draco dxr2 - Roger Meier <r.meier at siemens.com>
Active arm armv7 am33xx siemens pxm2 pxm2 - Roger Meier <r.meier at siemens.com>
Active arm armv7 am33xx siemens rut rut - Roger Meier <r.meier at siemens.com>
Active arm armv7 am33xx silica pengwyn pengwyn - Lothar Felten <lothar.felten at gmail.com>
--
1.7.10.4
More information about the U-Boot
mailing list