[U-Boot] [PATCH v2 1/3] mkimage: add atmelimage
Andreas Bießmann
andreas.devel at googlemail.com
Fri May 16 11:59:13 CEST 2014
The new atmelimage converts a machine code BLOB to bootable ROM image. Atmel
ROM has no sophisticated image format, it only checks the first 7 ARM vectors.
The vectors can contain valid B or LDR opcodes, the 6'th vector contains the
image size to load.
Additionally the PMECC header can be written by the atmelimage target. The
parameters must be given via the -n switch as a coma separated list. For
example:
mkimage -T atmelimage \
-n usePmecc=1,sectorPerPage=4,sectorSize=512,spareSize=64,eccBits=4,eccOffset=36 \
-d spl/u-boot-spl.bin boot.bin
A provided image can be checked for correct header setup. It prints out the
PMECC header parameters if it has one and the 6'th interrupt vector content.
---8<---
Image Type: ATMEL ROM-Boot Image with PMECC Header
PMECC header
====================
eccOffset: 36
sectorSize: 512
eccBitReq: 4
spareSize: 64
nbSectorPerPage: 4
usePmecc: 1
====================
6'th vector has 17044 set
--->8---
A SPL binary modified with the atmelimage mkimage target was succesfully
booted on a sama5d34ek via MMC and NAND.
Signed-off-by: Andreas Bießmann <andreas.devel at googlemail.com>
Cc: Bo Shen <voice.shen at atmel.com>
Cc: Heiko Schocher <hs at denx.de>
---
Changes in v2:
* do not check filesize in atmelimage
* add PMECC header generation and printout
* add printout of 6'th vector
common/image.c | 1 +
include/image.h | 1 +
tools/Makefile | 1 +
tools/atmelimage.c | 345 ++++++++++++++++++++++++++++++++++++++++++++++++++++
tools/imagetool.c | 2 +
tools/imagetool.h | 1 +
6 files changed, 351 insertions(+)
create mode 100644 tools/atmelimage.c
diff --git a/common/image.c b/common/image.c
index fcc5a9c..7cb0bd7 100644
--- a/common/image.c
+++ b/common/image.c
@@ -139,6 +139,7 @@ static const table_entry_t uimage_type[] = {
{ IH_TYPE_STANDALONE, "standalone", "Standalone Program", },
{ IH_TYPE_UBLIMAGE, "ublimage", "Davinci UBL image",},
{ IH_TYPE_MXSIMAGE, "mxsimage", "Freescale MXS Boot Image",},
+ { IH_TYPE_ATMELIMAGE, "atmelimage", "ATMEL ROM-Boot Image",},
{ -1, "", "", },
};
diff --git a/include/image.h b/include/image.h
index b278778..9c3b9b8 100644
--- a/include/image.h
+++ b/include/image.h
@@ -225,6 +225,7 @@ struct lmb;
#define IH_TYPE_PBLIMAGE 15 /* Freescale PBL Boot Image */
#define IH_TYPE_MXSIMAGE 16 /* Freescale MXSBoot Image */
#define IH_TYPE_GPIMAGE 17 /* TI Keystone GPHeader Image */
+#define IH_TYPE_ATMELIMAGE 18 /* ATMEL ROM bootable Image */
/*
* Compression Types
diff --git a/tools/Makefile b/tools/Makefile
index 6e43a01..421ff50 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -69,6 +69,7 @@ RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := rsa-sign.o rsa-verify.o rsa-checksum.o
# common objs for dumpimage and mkimage
dumpimage-mkimage-objs := aisimage.o \
+ atmelimage.o \
$(FIT_SIG_OBJS-y) \
crc32.o \
default_image.o \
diff --git a/tools/atmelimage.c b/tools/atmelimage.c
new file mode 100644
index 0000000..099a326
--- /dev/null
+++ b/tools/atmelimage.c
@@ -0,0 +1,345 @@
+/*
+ * (C) Copyright 2014
+ * Andreas Bießmann <andreas.devel at googlemail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "imagetool.h"
+#include "mkimage.h"
+
+#include <image.h>
+
+#define pr_err(fmt, args...) fprintf(stderr, "atmelimage Error: " fmt, ##args)
+
+static int atmel_check_image_type(uint8_t type)
+{
+ if (type == IH_TYPE_ATMELIMAGE)
+ return EXIT_SUCCESS;
+ else
+ return EXIT_FAILURE;
+}
+
+static uint32_t nand_pmecc_header[52];
+
+/*
+ * A helper struct for parsing the mkimage -n parameter
+ *
+ * Keep in same order as the configs array!
+ */
+static struct pmecc_config {
+ int use_pmecc;
+ int sector_per_page;
+ int spare_size;
+ int ecc_bits;
+ int sector_size;
+ int ecc_offset;
+} pmecc;
+
+/*
+ * Strings used for configure the PMECC header via -n mkimage switch
+ *
+ * We estimate a coma separated list of key=value pairs. The mkimage -n
+ * parameter argument should not contain any whitespace.
+ *
+ * Keep in same order as struct pmecc_config!
+ */
+static const char * const configs[] = {
+ "usePmecc",
+ "sectorPerPage",
+ "spareSize",
+ "eccBits",
+ "sectorSize",
+ "eccOffset"
+};
+
+static int atmel_find_pmecc_parameter_in_token(const char *token)
+{
+ size_t pos;
+ char *param;
+
+ debug("token: '%s'\n", token);
+
+ for (pos = 0; pos < ARRAY_SIZE(configs); pos++) {
+ if (strncmp(token, configs[pos], strlen(configs[pos])) == 0) {
+ param = strstr(token, "=");
+ if (!param)
+ goto err;
+
+ param++;
+ debug("\t%s parameter: '%s'\n", configs[pos], param);
+
+ switch (pos) {
+ case 0:
+ if (*param == 'y' || *param == '1')
+ pmecc.use_pmecc = 1;
+ else
+ pmecc.use_pmecc = 0;
+ return EXIT_SUCCESS;
+ case 1:
+ pmecc.sector_per_page = strtol(param, NULL, 10);
+ return EXIT_SUCCESS;
+ case 2:
+ pmecc.spare_size = strtol(param, NULL, 10);
+ return EXIT_SUCCESS;
+ case 3:
+ pmecc.ecc_bits = strtol(param, NULL, 10);
+ return EXIT_SUCCESS;
+ case 4:
+ pmecc.sector_size = strtol(param, NULL, 10);
+ return EXIT_SUCCESS;
+ case 5:
+ pmecc.ecc_offset = strtol(param, NULL, 10);
+ return EXIT_SUCCESS;
+ }
+ }
+ }
+
+err:
+ pr_err("Could not find parameter in token '%s'\n", token);
+ return EXIT_FAILURE;
+}
+
+static int atmel_parse_pmecc_params(char *txt)
+{
+ char *token;
+
+ token = strtok(txt, ",");
+ while (token != NULL) {
+ if (atmel_find_pmecc_parameter_in_token(token))
+ return EXIT_FAILURE;
+
+ token = strtok(NULL, ",");
+ }
+
+ return EXIT_SUCCESS;
+}
+
+static int atmel_verify_header(unsigned char *ptr, int image_size,
+ struct image_tool_params *params)
+{
+ uint32_t *ints = (uint32_t *)ptr;
+ size_t pos;
+ size_t size = image_size;
+
+ /* check if we have an PMECC header attached */
+ for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++)
+ if (ints[pos] >> 28 != 0xC)
+ break;
+
+ if (pos == ARRAY_SIZE(nand_pmecc_header)) {
+ ints += ARRAY_SIZE(nand_pmecc_header);
+ size -= sizeof(nand_pmecc_header);
+ }
+
+ /* check the seven interrupt vectors of binary */
+ for (pos = 0; pos < 7; pos++) {
+ debug("atmelimage: interrupt vector #%d is 0x%08X\n", pos+1,
+ ints[pos]);
+ /*
+ * all vectors except the 6'th one must contain valid
+ * LDR or B Opcode
+ */
+ if (pos == 5)
+ /* 6'th vector has image size set, check later */
+ continue;
+ if ((ints[pos] & 0xff000000) == 0xea000000)
+ /* valid B Opcode */
+ continue;
+ if ((ints[pos] & 0xfffff000) == 0xe59ff000)
+ /* valid LDR (I=0, P=1, U=1, B=0, W=0, L=1) */
+ continue;
+ /* ouch, one of the checks has missed ... */
+ return 1;
+ }
+
+ return ints[5] != cpu_to_le32(size);
+}
+
+static void atmel_print_pmecc_header(const uint32_t word)
+{
+ int val;
+
+ printf("\t\tPMECC header\n");
+
+ printf("\t\t====================\n");
+
+ val = (word >> 18) & 0x1ff;
+ printf("\t\teccOffset: %9i\n", val);
+
+ val = (((word >> 16) & 0x3) == 0) ? 512 : 1024;
+ printf("\t\tsectorSize: %8i\n", val);
+
+ if (((word >> 13) & 0x7) <= 2)
+ val = (2 << ((word >> 13) & 0x7));
+ else
+ val = (12 << (((word >> 13) & 0x7) - 3));
+ printf("\t\teccBitReq: %9i\n", val);
+
+ val = (word >> 4) & 0x1ff;
+ printf("\t\tspareSize: %9i\n", val);
+
+ val = (1 << ((word >> 1) & 0x3));
+ printf("\t\tnbSectorPerPage: %3i\n", val);
+
+ printf("\t\tusePmecc: %10i\n", word & 0x1);
+ printf("\t\t====================\n");
+}
+
+static void atmel_print_header(const void *ptr)
+{
+ uint32_t *ints = (uint32_t *)ptr;
+ size_t pos;
+
+ /* check if we have an PMECC header attached */
+ for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++)
+ if (ints[pos] >> 28 != 0xC)
+ break;
+
+ if (pos == ARRAY_SIZE(nand_pmecc_header)) {
+ printf("Image Type:\tATMEL ROM-Boot Image with PMECC Header\n");
+ atmel_print_pmecc_header(ints[0]);
+ pos += 5;
+ } else {
+ printf("Image Type:\tATMEL ROM-Boot Image without PMECC Header\n");
+ pos = 5;
+ }
+ printf("\t\t6'th vector has %u set\n", le32_to_cpu(ints[pos]));
+}
+
+static void atmel_set_header(void *ptr, struct stat *sbuf, int ifd,
+ struct image_tool_params *params)
+{
+ /* just save the image size into 6'th interrupt vector */
+ uint32_t *ints = (uint32_t *)ptr;
+ size_t cnt;
+ size_t pos = 5;
+ size_t size = sbuf->st_size;
+
+ for (cnt = 0; cnt < ARRAY_SIZE(nand_pmecc_header); cnt++)
+ if (ints[cnt] >> 28 != 0xC)
+ break;
+
+ if (cnt == ARRAY_SIZE(nand_pmecc_header)) {
+ pos += ARRAY_SIZE(nand_pmecc_header);
+ size -= sizeof(nand_pmecc_header);
+ }
+
+ ints[pos] = cpu_to_le32(size);
+}
+
+static int atmel_check_params(struct image_tool_params *params)
+{
+ if (strlen(params->imagename) > 0)
+ if (atmel_parse_pmecc_params(params->imagename))
+ return EXIT_FAILURE;
+
+ return !(!params->eflag &&
+ !params->fflag &&
+ !params->xflag &&
+ ((params->dflag && !params->lflag) ||
+ (params->lflag && !params->dflag)));
+}
+
+static int atmel_vrec_header(struct image_tool_params *params,
+ struct image_type_params *tparams)
+{
+ uint32_t tmp;
+ size_t pos;
+
+ if (strlen(params->imagename) == 0)
+ return EXIT_SUCCESS;
+
+ tmp = 0xC << 28;
+
+ tmp |= (pmecc.ecc_offset & 0x1ff) << 18;
+
+ switch (pmecc.sector_size) {
+ case 512:
+ tmp |= 0 << 16;
+ break;
+ case 1024:
+ tmp |= 1 << 16;
+ break;
+
+ default:
+ pr_err("Wrong sectorSize (%i) for PMECC header\n",
+ pmecc.sector_size);
+ return EXIT_FAILURE;
+ }
+
+ switch (pmecc.ecc_bits) {
+ case 2:
+ tmp |= 0 << 13;
+ break;
+ case 4:
+ tmp |= 1 << 13;
+ break;
+ case 8:
+ tmp |= 2 << 13;
+ break;
+ case 12:
+ tmp |= 3 << 13;
+ break;
+ case 24:
+ tmp |= 4 << 13;
+ break;
+
+ default:
+ pr_err("Wrong eccBits (%i) for PMECC header\n",
+ pmecc.ecc_bits);
+ return EXIT_FAILURE;
+ }
+
+ tmp |= (pmecc.spare_size & 0x1ff) << 4;
+
+ switch (pmecc.sector_per_page) {
+ case 1:
+ tmp |= 0 << 1;
+ break;
+ case 2:
+ tmp |= 1 << 1;
+ break;
+ case 4:
+ tmp |= 2 << 1;
+ break;
+ case 8:
+ tmp |= 3 << 1;
+ break;
+
+ default:
+ pr_err("Wrong sectorPerPage (%i) for PMECC header\n",
+ pmecc.sector_per_page);
+ return EXIT_FAILURE;
+ }
+
+ if (pmecc.use_pmecc)
+ tmp |= 1;
+
+ for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++)
+ nand_pmecc_header[pos] = tmp;
+
+ debug("PMECC header filled 52 times with 0x%08X\n", tmp);
+
+ tparams->header_size = sizeof(nand_pmecc_header);
+ tparams->hdr = nand_pmecc_header;
+
+ return EXIT_SUCCESS;
+}
+
+static struct image_type_params atmelimage_params = {
+ .name = "ATMEL ROM-Boot Image support",
+ .header_size = 0,
+ .hdr = NULL,
+ .check_image_type = atmel_check_image_type,
+ .verify_header = atmel_verify_header,
+ .print_header = atmel_print_header,
+ .set_header = atmel_set_header,
+ .check_params = atmel_check_params,
+ .vrec_header = atmel_vrec_header,
+};
+
+void init_atmel_image_type(void)
+{
+ register_image_type(&atmelimage_params);
+}
diff --git a/tools/imagetool.c b/tools/imagetool.c
index da72115..32d6278 100644
--- a/tools/imagetool.c
+++ b/tools/imagetool.c
@@ -27,6 +27,8 @@ void register_image_tool(imagetool_register_t image_register)
*/
register_func = image_register;
+ /* Init ATMEL ROM Boot Image generation/list support */
+ init_atmel_image_type();
/* Init Freescale PBL Boot image generation/list support */
init_pbl_image_type();
/* Init Kirkwood Boot image generation/list support */
diff --git a/tools/imagetool.h b/tools/imagetool.h
index a3e9d30..c480687 100644
--- a/tools/imagetool.h
+++ b/tools/imagetool.h
@@ -159,6 +159,7 @@ void register_image_type(struct image_type_params *tparams);
* Supported image types init functions
*/
void init_default_image_type(void);
+void init_atmel_image_type(void);
void init_pbl_image_type(void);
void init_ais_image_type(void);
void init_kwb_image_type(void);
--
1.7.10.4
More information about the U-Boot
mailing list