[U-Boot] Problem building am335x_evm config

[Vasili Galka]

On Sun, May 4, 2014 at 4:12 PM, Jeroen Hofstee <dasuboot at myspectrum.nl>wrote:

> Hello Vasili,
>
> On zo, 2014-05-04 at 14:48 +0300, Vasili Galka wrote:
> > On Sun, May 4, 2014 at 2:24 PM, Belisko Marek <marek.belisko at gmail.com
> >wrote:
> >
> > > >
> > > > I've followed your advice and tried the following two on clean tree:
> > > >
> > > > make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm
> > > > am335x_evm_config
> > > >
> > > > make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm
> am335x_evm
> > > >
> > > > Unfortunately, this does not help. I'm still getting the same error.
> > > Try:
> > > make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_evm_defconfig
> > > make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
> > >
> > > it works for me (please update your CROSS_COMPILE)
> > >
>
> As Marek showed above, just use make after configure. I.o.w. remove
> the board name as an argument to the second make command.
>
> Regards,
> Jeroen
>
>
Oh, I see. Missed this. Thank you guys!