[U-Boot] Please pull mpc85xx
Tom Rini
trini at ti.com
Tue May 13 23:45:42 CEST 2014
On Tue, May 13, 2014 at 11:12:53AM -0500, York Sun wrote:
> Tom,
>
> The following changes since commit 69c0d323e325f48f3124fb0696de3d68fcbcae8e:
>
> kbuild: Fix trailing whitespaces (2014-05-12 16:31:51 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx.git master
>
> for you to fetch changes up to 8ad5d45e0044f5e64dbe7c6bd4e6aa0121a26b23:
>
> boards.cfg: fix a configuration error of ep8248 board (2014-05-13 11:00:01 -0500)
>
> ----------------------------------------------------------------
> Alexander Graf (4):
> PPC 85xx QEMU: Always assume 1 core
> PPC 85xx QEMU: Don't use HID1
> powerpc/mpc85xx: Update TLB CAMs in relocated mode
> PPC 85xx QEMU: Make a generic board file
>
> Aneesh Bansal (2):
> powerpc/mpc85xx: SECURE BOOT- secure boot target for t1040rdb
> powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080RDB
>
> Chunhe Lan (1):
> powerpc/85xx: Add T4240RDB board support
>
> Masahiro Yamada (1):
> boards.cfg: fix a configuration error of ep8248 board
>
> Shaohui Xie (1):
> powerpc/fman/memac: use default MDIO_HOLD value
>
> Shaveta Leekha (2):
> board/freescale/common: ZM7300 driver
> board/b4qds: VID support
>
> Shengzhou Liu (2):
> powerpc/t208x: enable errata A006261, A006593, A006379
> powerpc/85xx: add T4080 SoC support
>
> Stefan Bigler (2):
> kmp204x: Add support for the unit LEDs
> kmp204x: handle dip-switch for factory settings
>
> Valentin Longchamp (6):
> kmp204x: selftest/factory test pin support
> kmp204x: update the CONFIG_PRAM and CONFIG_KM_RESERVED_PRAM defines
> kmp204x: complete the reset sequence and PRST configuration
> kmp204x: update the RCW
> kmp204x: add workaround for A-004849
> kmp204x: enable the errata command
>
> York Sun (6):
> powerpc/mpc8572ds: Increase u-boot size to 768KB
> powerpc/mpc85xx: Ignore FDT pointer for non-QEMU in cpu_init_early_f()
> powerpc/freescale: Change the return value of mac_read_from_eeprom()
> powerpc/mpc85xx: Fix boot_flag for calling board_init_f()
> powerpc/mpc86xx: Fix boot_flag for calling board_init_f()
> powerpc/freescale: Convert selected boards to generic board architecture
>
> Zhao Qiang (1):
> qe: disable qe when qe-ucode fails to be uploaded for "deep sleep"
>
> arch/powerpc/cpu/mpc85xx/Makefile | 2 +
> arch/powerpc/cpu/mpc85xx/cpu.c | 24 +
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 +-
> arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 2 +
> arch/powerpc/cpu/mpc85xx/speed.c | 3 +-
> arch/powerpc/cpu/mpc85xx/spl_minimal.c | 4 +-
> arch/powerpc/cpu/mpc85xx/start.S | 4 +-
> arch/powerpc/cpu/mpc85xx/t4240_ids.c | 2 +
> arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 2 +-
> arch/powerpc/cpu/mpc86xx/start.S | 1 +
> arch/powerpc/cpu/mpc8xxx/cpu.c | 5 +-
> arch/powerpc/include/asm/config_mpc85xx.h | 19 +-
> arch/powerpc/include/asm/fsl_errata.h | 5 +
> arch/powerpc/include/asm/fsl_secure_boot.h | 3 +-
> arch/powerpc/include/asm/immap_85xx.h | 6 +-
> arch/powerpc/include/asm/processor.h | 1 +
> board/freescale/b4860qds/b4860qds.c | 240 +++++++++
> board/freescale/common/Makefile | 1 +
> board/freescale/common/sys_eeprom.c | 6 +-
> board/freescale/common/zm7300.c | 235 +++++++++
> board/freescale/common/zm7300.h | 22 +
> board/freescale/qemu-ppce500/qemu-ppce500.c | 20 +
> board/freescale/t4rdb/Makefile | 12 +
> board/freescale/t4rdb/ddr.c | 118 +++++
> board/freescale/t4rdb/ddr.h | 78 +++
> board/freescale/t4rdb/eth.c | 146 ++++++
> board/freescale/t4rdb/law.c | 28 +
> board/freescale/t4rdb/pci.c | 23 +
> board/freescale/t4rdb/t4240rdb.c | 125 +++++
> board/freescale/t4rdb/t4_pbi.cfg | 31 ++
> board/freescale/t4rdb/t4_rcw.cfg | 7 +
> board/freescale/t4rdb/t4rdb.h | 18 +
> board/freescale/t4rdb/tlb.c | 111 ++++
> board/keymile/kmp204x/kmp204x.c | 75 ++-
> board/keymile/kmp204x/kmp204x.h | 3 +
> board/keymile/kmp204x/pbi.cfg | 43 +-
> board/keymile/kmp204x/pci.c | 17 +-
> board/keymile/kmp204x/qrio.c | 31 +-
> board/keymile/kmp204x/rcw_kmp204x.cfg | 2 +-
> boards.cfg | 7 +-
> drivers/mmc/fsl_esdhc.c | 2 +-
> drivers/net/fm/Makefile | 1 +
> drivers/net/fm/memac_phy.c | 8 +-
> drivers/qe/qe.c | 9 +-
> include/common.h | 5 +-
> include/configs/B4860QDS.h | 14 +
> include/configs/MPC8536DS.h | 2 +
> include/configs/MPC8572DS.h | 5 +-
> include/configs/MPC8641HPCN.h | 3 +
> include/configs/T208xRDB.h | 1 +
> include/configs/T4240RDB.h | 752 +++++++++++++++++++++++++++
> include/configs/corenet_ds.h | 3 +
> include/configs/km/kmp204x-common.h | 17 +-
> include/configs/p1_p2_rdb_pc.h | 3 +
> include/configs/qemu-ppce500.h | 1 +
> include/configs/t4qds.h | 2 +
> 56 files changed, 2257 insertions(+), 70 deletions(-)
> create mode 100644 board/freescale/common/zm7300.c
> create mode 100644 board/freescale/common/zm7300.h
> create mode 100644 board/freescale/t4rdb/Makefile
> create mode 100644 board/freescale/t4rdb/ddr.c
> create mode 100644 board/freescale/t4rdb/ddr.h
> create mode 100644 board/freescale/t4rdb/eth.c
> create mode 100644 board/freescale/t4rdb/law.c
> create mode 100644 board/freescale/t4rdb/pci.c
> create mode 100644 board/freescale/t4rdb/t4240rdb.c
> create mode 100644 board/freescale/t4rdb/t4_pbi.cfg
> create mode 100644 board/freescale/t4rdb/t4_rcw.cfg
> create mode 100644 board/freescale/t4rdb/t4rdb.h
> create mode 100644 board/freescale/t4rdb/tlb.c
> create mode 100644 include/configs/T4240RDB.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140513/4f31e33c/attachment.pgp>
More information about the U-Boot
mailing list