[U-Boot] Pull request: u-boot-arm/master
Tom Rini
trini at ti.com
Fri May 30 19:59:54 CEST 2014
On Fri, May 30, 2014 at 05:20:48PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> 9665fa8f9e1488209d5e01d0792c243e0a220c5a:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-05-24
> 06:34:08 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to 9637a1bb896efe392a58dd2772e2c3fcb646409d:
>
> ARM: at91sam9m10g45ek: add mmc environment configuration support
> (2014-05-27 00:10:55 +0200)
>
> ----------------------------------------------------------------
> Andreas Bießmann (4):
> corvus: remove unneeded CONFIG_AT91_LEGACY
> mkimage: add atmelimage
> arm:at91: enable ROM loadable atmel image
> sama5d3xek: enable PMECC header generation
>
> Bo Shen (6):
> ARM: atmel: switch to main crystal osc for SPL boot
> ARM: atmel: enable SPL on sama5d3_xplained board
> ARM: atmel: sama5d3xek: convert to generic board
> ARM: atmel: sama5d3_xplained: convert to generic board
> ARM: atmel: at91sam9m10g45ek: convert to generic board
> ARM: atmel: at91sam9x5ek: convert to generic board
>
> David Feng (1):
> Arm64 fix a bug of vbar_el3 initialization
>
> Ian Campbell (12):
> sunxi: add sun7i clocks and timer support.
> sunxi: add sun7i pinmux and gpio support
> sunxi: add sun7i dram setup support
> sunxi: add sun7i cpu, board and start of day support
> sunxi: add support for Cubietruck booting in FEL mode
> sunxi: add gmac Ethernet support
> sunxi: mmc support
> sunxi: non-FEL SPL boot support for sun7i
> net/designware: ensure device private data is DMA aligned.
> net/designware: ensure cache invalidations are aligned to
> ARCH_DMA_MINALIGN net/designware: reorder struct dw_eth_dev to pack
> more efficiently. net/designware: Make DMA burst length configurable
> and reduce by default
>
> Michael Walle (2):
> lsxl: use 64bit for LBA48 to support 4 TB drives
> lsxl: rework boot scripts
>
> Rob Herring (2):
> ARM: highbank: convert to generic board
> boards.cfg: update highbank maintainer email
>
> Stefan Agner (1):
> arm: vf610: add DDR_SEL_PAD_CONTR register
>
> Wu, Josh (8):
> gpio: at91: add sanity check for the NULL pointer
> mmc: atmel_mci: fix print incorrect buffer content for debug
> ARM: at91: remove AT91X40 macro since it is not use any more
> ARM: at91sam9x5: define the AT91FAMILY and ARM926EJS in SoC header
> at91: remove redundant AT91FAMILY definition in board config file
> ARM: at91: remove redundant ARM926EJS definition in board config
> files ARM: at91sam9m10g45ek: enable mci0 support
> ARM: at91sam9m10g45ek: add mmc environment configuration support
>
> Makefile | 10 ++
> arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 17 ++++
> arch/arm/cpu/armv7/Makefile | 2 +-
> arch/arm/cpu/armv7/at91/config.mk | 10 ++
> arch/arm/cpu/armv7/sunxi/Makefile | 25 +++++
> arch/arm/cpu/armv7/sunxi/board.c | 111
> +++++++++++++++++++++
> arch/arm/cpu/armv7/sunxi/clock.c | 25 +++++
> arch/arm/cpu/armv7/sunxi/clock_sun4i.c | 188
> ++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/sunxi/config.mk | 8 ++
> arch/arm/cpu/armv7/sunxi/cpu_info.c | 19 ++++
> arch/arm/cpu/armv7/sunxi/dram.c | 593
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/sunxi/pinmux.c | 61
> ++++++++++++ arch/arm/cpu/armv7/sunxi/start.c |
> 1 + arch/arm/cpu/armv7/sunxi/timer.c | 113
> ++++++++++++++++++++++
> arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds | 77
> +++++++++++++++ arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
> | 52 ++++++++++ arch/arm/cpu/armv8/start.S
> | 4 +- arch/arm/cpu/at91-common/spl.c | 39
> ++++++++ arch/arm/include/asm/arch-at91/at91_pmc.h | 4 +
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 3 +
> arch/arm/include/asm/arch-at91/hardware.h | 2 -
> arch/arm/include/asm/arch-sunxi/clock.h | 29 ++++++
> arch/arm/include/asm/arch-sunxi/clock_sun4i.h | 256
> ++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-sunxi/cpu.h | 122
> +++++++++++++++++++++++
> arch/arm/include/asm/arch-sunxi/dram.h | 179
> ++++++++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-sunxi/gpio.h | 147
> ++++++++++++++++++++++++++++
> arch/arm/include/asm/arch-sunxi/mmc.h | 124
> ++++++++++++++++++++++++
> arch/arm/include/asm/arch-sunxi/spl.h | 20 ++++
> arch/arm/include/asm/arch-sunxi/sys_proto.h | 16 +++
> arch/arm/include/asm/arch-sunxi/timer.h | 88
> +++++++++++++++++ arch/arm/include/asm/arch-vf610/imx-regs.h
> | 1 + board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 10 ++
> board/atmel/sama5d3_xplained/sama5d3_xplained.c | 87
> +++++++++++++++++ board/freescale/vf610twr/vf610twr.c
> | 3 +- board/sunxi/Makefile | 13
> +++ board/sunxi/board.c | 120
> +++++++++++++++++++++++
> board/sunxi/dram_cubietruck.c | 31 ++++++
> board/sunxi/gmac.c | 32 ++++++
> boards.cfg | 5 +-
> common/image.c | 1 +
> doc/README.atmel_pmecc | 21 ++++
> drivers/gpio/at91_gpio.c | 3 +-
> drivers/mmc/Makefile | 1 +
> drivers/mmc/gen_atmel_mci.c | 5 +-
> drivers/mmc/sunxi_mmc.c | 503
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/net/designware.c | 23 +++--
> drivers/net/designware.h | 23 +++--
> include/configs/at91sam9m10g45ek.h | 37 ++++++-
> include/configs/at91sam9n12ek.h | 3 -
> include/configs/at91sam9x5ek.h | 3 +-
> include/configs/corvus.h | 3 -
> include/configs/cpu9260.h | 1 -
> include/configs/ethernut5.h | 2 -
> include/configs/highbank.h | 1 +
> include/configs/lsxl.h | 41 ++++++--
> include/configs/sama5d3_xplained.h | 53 +++++++++-
> include/configs/sama5d3xek.h | 4 +-
> include/configs/sun7i.h | 24 +++++
> include/configs/sunxi-common.h | 195
> +++++++++++++++++++++++++++++++++++++
> include/configs/vl_ma2sc.h | 2 -
> include/image.h | 1 +
> include/netdev.h | 1 +
> spl/Makefile | 24 +++++
> tools/.gitignore | 1 +
> tools/Makefile | 5 +
> tools/atmel_pmecc_params.c | 51 ++++++++++
> tools/atmelimage.c | 342
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> tools/imagetool.c | 2 +
> tools/imagetool.h | 1 +
> tools/mksunxiboot.c | 142
> +++++++++++++++++++++++++++ 70 files changed, 4112 insertions(+), 54
> deletions(-) create mode 100644 arch/arm/cpu/armv7/at91/config.mk
> create mode 100644 arch/arm/cpu/armv7/sunxi/Makefile create mode
> 100644 arch/arm/cpu/armv7/sunxi/board.c create mode 100644
> arch/arm/cpu/armv7/sunxi/clock.c create mode 100644
> arch/arm/cpu/armv7/sunxi/clock_sun4i.c create mode 100644
> arch/arm/cpu/armv7/sunxi/config.mk create mode 100644
> arch/arm/cpu/armv7/sunxi/cpu_info.c create mode 100644
> arch/arm/cpu/armv7/sunxi/dram.c create mode 100644
> arch/arm/cpu/armv7/sunxi/pinmux.c create mode 100644
> arch/arm/cpu/armv7/sunxi/start.c create mode 100644
> arch/arm/cpu/armv7/sunxi/timer.c create mode 100644
> arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds create mode 100644
> arch/arm/cpu/armv7/sunxi/u-boot-spl.lds create mode 100644
> arch/arm/include/asm/arch-sunxi/clock.h create mode 100644
> arch/arm/include/asm/arch-sunxi/clock_sun4i.h create mode 100644
> arch/arm/include/asm/arch-sunxi/cpu.h create mode 100644
> arch/arm/include/asm/arch-sunxi/dram.h create mode 100644
> arch/arm/include/asm/arch-sunxi/gpio.h create mode 100644
> arch/arm/include/asm/arch-sunxi/mmc.h create mode 100644
> arch/arm/include/asm/arch-sunxi/spl.h create mode 100644
> arch/arm/include/asm/arch-sunxi/sys_proto.h create mode 100644
> arch/arm/include/asm/arch-sunxi/timer.h create mode 100644
> board/sunxi/Makefile create mode 100644 board/sunxi/board.c create
> mode 100644 board/sunxi/dram_cubietruck.c create mode 100644
> board/sunxi/gmac.c create mode 100644 drivers/mmc/sunxi_mmc.c create
> mode 100644 include/configs/sun7i.h create mode 100644
> include/configs/sunxi-common.h create mode 100644
> tools/atmel_pmecc_params.c create mode 100644 tools/atmelimage.c
> create mode 100644 tools/mksunxiboot.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140530/c5767b07/attachment.pgp>
More information about the U-Boot
mailing list