[U-Boot] [RFC, PATCH v2 4/4] mtd, ubi, ubifs: resync with Linux-3.14

Heiko Schocher hs at denx.de
Thu May 22 12:43:08 CEST 2014


resync ubi subsystem with linux:

commit 455c6fdbd219161bd09b1165f11699d6d73de11c
Author: Linus Torvalds <torvalds at linux-foundation.org>
Date:   Sun Mar 30 20:40:15 2014 -0700

    Linux 3.14

- UBI Fastmap is now availiable in U-Boot
  activate it with CONFIG_MTD_UBI_FASTMAP

- adapt the Linux code to compile and work with U-Boot.

- replace UBI_LINUX in current UBI code from U-Boot with
  __UBOOT__ as this define is used in other places in U-Boot
  where code from other projects is used.

- move a lot of defines from include/ubi_uboot.h to
  include/linux/compat.h, as this is the correct place for it.

- add usb device to linux device, so usb uses "struct device"
  from "linux/compat.h"

- onenand changes only compile tested.

- Following Code in drivers/mtd/nand/nand_base.c nand_do_write_ops()
  adapted for U-Boot:

  +#ifndef __UBOOT__
        /* Reject writes, which are not page aligned */
        if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
  +else
  +     /* Reject writes, which are not page aligned */
  +     if (NOTALIGNED(to)) {
  +endif

  as the original linux code leads in not working use of the env
  var "filesize". For example a "nand write 80000000 80000 ${filesize}"
  would not work with it ...

- add CONFIG_MTD_NAND_VERIFY_WRITE from U-Boot code

- Documented the config defines in README

- kmalloc now uses memalign for allocating memory

- To produce this patch I did three steps:
  - copied the linux source files to U-Boot tree -> commit this
  - adapt license text in each file -> commit this
  - make the code again compile clean and working -> commit this

  Then squash this three patches to this patch, to not break
  bisectability. To make further sync with linux easier, the
  above three patches can be found in:

http://git.denx.de/?p=u-boot/u-boot-testing.git;a=shortlog;h=refs/heads/update-mtd%2Bubi-linux-v3.14

  Please do not use this branch for testing this patchserie!

Signed-off-by: Heiko Schocher <hs at denx.de>
Cc: Marek Vasut <marex at denx.de>
Cc: Sergey Lapin <slapin at ossfans.org>
Cc: Scott Wood <scottwood at freescale.com>
Cc: Wolfgang Denk <wd at denx.de>
Cc: Joerg Krause <jkrause at posteo.de>
---

Tested it on am33xx, imx6 and mpc83xx boards. MAKEALL for arm and powerpc
compiles clean.

Tested UBI fastmap on a board with 512 MiB nand flash. Attach time
from old U-Boot was 2 seconds, reduced with UBI fastmap to 0.2 seconds.

Please test this patch!

- changes for v2:
  - add lib/linux_compat.c as Joerg Krause detected
---
 README                              |   61 +
 board/prodrive/alpr/nand.c          |    4 +
 board/socrates/nand.c               |    6 +
 board/tqc/tqm8272/nand.c            |    4 +
 common/cmd_ubi.c                    |   29 +-
 common/cmd_ubifs.c                  |    2 +-
 drivers/mtd/mtdconcat.c             |  230 ++-
 drivers/mtd/mtdcore.c               | 1112 ++++++++++++-
 drivers/mtd/mtdcore.h               |   23 +
 drivers/mtd/mtdpart.c               |  521 +++++-
 drivers/mtd/nand/fsl_elbc_nand.c    |    4 +
 drivers/mtd/nand/fsl_ifc_nand.c     |    4 +
 drivers/mtd/nand/fsl_upm.c          |    4 +
 drivers/mtd/nand/mpc5121_nfc.c      |    4 +
 drivers/mtd/nand/mxc_nand.c         |    8 +
 drivers/mtd/nand/nand_base.c        | 1897 +++++++++++++++------
 drivers/mtd/nand/nand_bbt.c         |  296 ++--
 drivers/mtd/nand/nand_ids.c         |  256 +--
 drivers/mtd/nand/nand_util.c        |    3 +
 drivers/mtd/nand/ndfc.c             |    4 +
 drivers/mtd/onenand/onenand_base.c  |    1 +
 drivers/mtd/onenand/onenand_bbt.c   |    1 -
 drivers/mtd/onenand/samsung.c       |   10 +-
 drivers/mtd/ubi/Makefile            |    3 +-
 drivers/mtd/ubi/attach.c            | 1754 ++++++++++++++++++++
 drivers/mtd/ubi/build.c             |  812 ++++++---
 drivers/mtd/ubi/crc32.c             |   13 +-
 drivers/mtd/ubi/crc32table.h        |    2 +-
 drivers/mtd/ubi/debug.c             |  482 ++++--
 drivers/mtd/ubi/debug.h             |  178 +-
 drivers/mtd/ubi/eba.c               |  474 ++++--
 drivers/mtd/ubi/fastmap.c           | 1584 ++++++++++++++++++
 drivers/mtd/ubi/io.c                |  788 +++++----
 drivers/mtd/ubi/kapi.c              |  276 ++-
 drivers/mtd/ubi/misc.c              |   58 +-
 drivers/mtd/ubi/scan.c              | 1348 ---------------
 drivers/mtd/ubi/scan.h              |  153 --
 drivers/mtd/ubi/ubi-media.h         |  205 ++-
 drivers/mtd/ubi/ubi.h               |  626 +++++--
 drivers/mtd/ubi/upd.c               |  104 +-
 drivers/mtd/ubi/vmt.c               |  283 ++--
 drivers/mtd/ubi/vtbl.c              |  359 ++--
 drivers/mtd/ubi/wl.c                | 1590 +++++++++++-------
 drivers/usb/gadget/ether.c          |    5 -
 drivers/usb/gadget/storage_common.c |    5 -
 drivers/usb/musb-new/linux-compat.h |   58 -
 drivers/video/exynos_dp.c           |    1 +
 drivers/video/exynos_mipi_dsi.c     |    1 +
 fs/ubifs/budget.c                   |  662 +++++++-
 fs/ubifs/debug.c                    | 3132 ++++++++++++++++++++++++++++++++++-
 fs/ubifs/debug.h                    |  578 ++++---
 fs/ubifs/io.c                       |  897 +++++++++-
 fs/ubifs/key.h                      |   68 +-
 fs/ubifs/log.c                      |  663 +++++++-
 fs/ubifs/lprops.c                   |  538 +++++-
 fs/ubifs/lpt.c                      | 1242 +++++++++++++-
 fs/ubifs/lpt_commit.c               | 1903 ++++++++++++++++++++-
 fs/ubifs/master.c                   |  102 +-
 fs/ubifs/misc.h                     |  159 +-
 fs/ubifs/orphan.c                   |  671 +++++++-
 fs/ubifs/recovery.c                 |  738 ++++++---
 fs/ubifs/replay.c                   |  573 ++++---
 fs/ubifs/sb.c                       |  547 +++++-
 fs/ubifs/scan.c                     |  102 +-
 fs/ubifs/super.c                    | 2173 ++++++++++++++++++++----
 fs/ubifs/tnc.c                      |  742 ++++++++-
 fs/ubifs/tnc_misc.c                 |  124 +-
 fs/ubifs/ubifs-media.h              |   62 +-
 fs/ubifs/ubifs.c                    |  115 +-
 fs/ubifs/ubifs.h                    |  708 +++++---
 fs/yaffs2/ydirectenv.h              |    2 -
 include/linux/compat.h              |  327 +++-
 include/linux/err.h                 |   15 +-
 include/linux/mtd/bbm.h             |   73 +-
 include/linux/mtd/concat.h          |    4 +
 include/linux/mtd/flashchip.h       |  105 ++
 include/linux/mtd/mtd.h             |  272 ++-
 include/linux/mtd/nand.h            |  350 +++-
 include/linux/mtd/partitions.h      |   60 +-
 include/linux/mtd/ubi.h             |  120 +-
 include/linux/usb/gadget.h          |    6 +-
 include/mtd/mtd-abi.h               |  195 ++-
 include/mtd/ubi-user.h              |  305 +++-
 include/ubi_uboot.h                 |  164 +-
 include/usb/lin_gadget_compat.h     |   16 -
 lib/Makefile                        |    1 +
 lib/linux_compat.c                  |   42 +
 87 files changed, 27060 insertions(+), 7142 deletions(-)
 create mode 100644 drivers/mtd/mtdcore.h
 create mode 100644 drivers/mtd/ubi/attach.c
 create mode 100644 drivers/mtd/ubi/fastmap.c
 delete mode 100644 drivers/mtd/ubi/scan.c
 delete mode 100644 drivers/mtd/ubi/scan.h
 create mode 100644 include/linux/mtd/flashchip.h
 create mode 100644 lib/linux_compat.c

diff --git a/README b/README
index 5f89552..ace7091 100644
--- a/README
+++ b/README
@@ -3214,6 +3214,9 @@ FIT uImage format:
 		Adds the MTD partitioning infrastructure from the Linux
 		kernel. Needed for UBI support.
 
+		CONFIG_MTD_NAND_VERIFY_WRITE
+		verify if the written data is correct reread.
+
 - UBI support
 		CONFIG_CMD_UBI
 
@@ -3227,6 +3230,64 @@ FIT uImage format:
 		Make the verbose messages from UBI stop printing.  This leaves
 		warnings and errors enabled.
 
+
+		CONFIG_MTD_UBI_WL_THRESHOLD
+		This parameter defines the maximum difference between the highest
+		erase counter value and the lowest erase counter value of eraseblocks
+		of UBI devices. When this threshold is exceeded, UBI starts performing
+		wear leveling by means of moving data from eraseblock with low erase
+		counter to eraseblocks with high erase counter.
+
+		The default value should be OK for SLC NAND flashes, NOR flashes and
+		other flashes which have eraseblock life-cycle 100000 or more.
+		However, in case of MLC NAND flashes which typically have eraseblock
+		life-cycle less than 10000, the threshold should be lessened (e.g.,
+		to 128 or 256, although it does not have to be power of 2).
+
+		default: 4096
+		
+		CONFIG_MTD_UBI_BEB_LIMIT
+		This option specifies the maximum bad physical eraseblocks UBI
+		expects on the MTD device (per 1024 eraseblocks). If the
+		underlying flash does not admit of bad eraseblocks (e.g. NOR
+		flash), this value is ignored.
+
+		NAND datasheets often specify the minimum and maximum NVM
+		(Number of Valid Blocks) for the flashes' endurance lifetime.
+		The maximum expected bad eraseblocks per 1024 eraseblocks
+		then can be calculated as "1024 * (1 - MinNVB / MaxNVB)",
+		which gives 20 for most NANDs (MaxNVB is basically the total
+		count of eraseblocks on the chip).
+
+		To put it differently, if this value is 20, UBI will try to
+		reserve about 1.9% of physical eraseblocks for bad blocks
+		handling. And that will be 1.9% of eraseblocks on the entire
+		NAND chip, not just the MTD partition UBI attaches. This means
+		that if you have, say, a NAND flash chip admits maximum 40 bad
+		eraseblocks, and it is split on two MTD partitions of the same
+		size, UBI will reserve 40 eraseblocks when attaching a
+		partition.
+
+		default: 20
+
+		CONFIG_MTD_UBI_FASTMAP
+		Fastmap is a mechanism which allows attaching an UBI device
+		in nearly constant time. Instead of scanning the whole MTD device it
+		only has to locate a checkpoint (called fastmap) on the device.
+		The on-flash fastmap contains all information needed to attach
+		the device. Using fastmap makes only sense on large devices where
+		attaching by scanning takes long. UBI will not automatically install
+		a fastmap on old images, but you can set the UBI parameter
+		CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT to 1 if you want so. Please note
+		that fastmap-enabled images are still usable with UBI implementations
+		without	fastmap support. On typical flash devices the whole fastmap
+		fits into one PEB. UBI will reserve PEBs to hold two fastmaps.
+
+		CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT
+		Set this parameter to enable fastmap automatically on images
+		without a fastmap.
+		default: 0
+
 - UBIFS support
 		CONFIG_CMD_UBIFS
 
diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c
index 50e8d82..5427de5 100644
--- a/board/prodrive/alpr/nand.c
+++ b/board/prodrive/alpr/nand.c
@@ -93,6 +93,7 @@ static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	}
 }
 
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
 {
 	int i;
@@ -103,6 +104,7 @@ static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len
 
 	return 0;
 }
+#endif
 
 static int alpr_nand_dev_ready(struct mtd_info *mtd)
 {
@@ -128,7 +130,9 @@ int board_nand_init(struct nand_chip *nand)
 	nand->read_byte  = alpr_nand_read_byte;
 	nand->write_buf  = alpr_nand_write_buf;
 	nand->read_buf   = alpr_nand_read_buf;
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 	nand->verify_buf = alpr_nand_verify_buf;
+#endif
 	nand->dev_ready  = alpr_nand_dev_ready;
 
 	return 0;
diff --git a/board/socrates/nand.c b/board/socrates/nand.c
index 3802c7e..7394478 100644
--- a/board/socrates/nand.c
+++ b/board/socrates/nand.c
@@ -18,7 +18,9 @@ static void sc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
 static u_char sc_nand_read_byte(struct mtd_info *mtd);
 static u16 sc_nand_read_word(struct mtd_info *mtd);
 static void sc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 static int sc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
+#endif
 static int sc_nand_device_ready(struct mtd_info *mtdinfo);
 
 #define FPGA_NAND_CMD_MASK		(0x7 << 28)
@@ -100,6 +102,7 @@ static void sc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	}
 }
 
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 /**
  * sc_nand_verify_buf -  Verify chip data against buffer
  * @mtd:	MTD device structure
@@ -116,6 +119,7 @@ static int sc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
 	}
 	return 0;
 }
+#endif
 
 /**
  * sc_nand_device_ready - Check the NAND device is ready for next command.
@@ -174,7 +178,9 @@ int board_nand_init(struct nand_chip *nand)
 	nand->read_word = sc_nand_read_word;
 	nand->write_buf = sc_nand_write_buf;
 	nand->read_buf = sc_nand_read_buf;
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 	nand->verify_buf = sc_nand_verify_buf;
+#endif
 
 	return 0;
 }
diff --git a/board/tqc/tqm8272/nand.c b/board/tqc/tqm8272/nand.c
index 4925b8d..7fb2dfa 100644
--- a/board/tqc/tqm8272/nand.c
+++ b/board/tqc/tqm8272/nand.c
@@ -188,6 +188,7 @@ static void tqm8272_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int
 		*base = buf[i];
 }
 
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 static int tqm8272_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
 {
 	struct nand_chip *this = mtdinfo->priv;
@@ -199,6 +200,7 @@ static int tqm8272_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int
 			return -1;
 	return 0;
 }
+#endif
 #endif /* #ifndef CONFIG_NAND_SPL */
 
 void board_nand_select_device(struct nand_chip *nand, int chip)
@@ -247,8 +249,10 @@ int board_nand_init(struct nand_chip *nand)
 #ifndef CONFIG_NAND_SPL
 	nand->write_buf	 = tqm8272_write_buf;
 	nand->read_buf	 = tqm8272_read_buf;
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 	nand->verify_buf = tqm8272_verify_buf;
 #endif
+#endif
 
 	/*
 	 * Select required NAND chip
diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c
index 7c4d950..7171690 100644
--- a/common/cmd_ubi.c
+++ b/common/cmd_ubi.c
@@ -19,6 +19,7 @@
 #include <onenand_uboot.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/err.h>
 #include <ubi_uboot.h>
 #include <asm/errno.h>
 #include <jffs2/load_kernel.h>
@@ -50,33 +51,6 @@ int ubifs_is_mounted(void);
 void cmd_ubifs_umount(void);
 #endif
 
-static void ubi_dump_vol_info(const struct ubi_volume *vol)
-{
-	ubi_msg("volume information dump:");
-	ubi_msg("vol_id          %d", vol->vol_id);
-	ubi_msg("reserved_pebs   %d", vol->reserved_pebs);
-	ubi_msg("alignment       %d", vol->alignment);
-	ubi_msg("data_pad        %d", vol->data_pad);
-	ubi_msg("vol_type        %d", vol->vol_type);
-	ubi_msg("name_len        %d", vol->name_len);
-	ubi_msg("usable_leb_size %d", vol->usable_leb_size);
-	ubi_msg("used_ebs        %d", vol->used_ebs);
-	ubi_msg("used_bytes      %lld", vol->used_bytes);
-	ubi_msg("last_eb_bytes   %d", vol->last_eb_bytes);
-	ubi_msg("corrupted       %d", vol->corrupted);
-	ubi_msg("upd_marker      %d", vol->upd_marker);
-
-	if (vol->name_len <= UBI_VOL_NAME_MAX &&
-		strnlen(vol->name, vol->name_len + 1) == vol->name_len) {
-		ubi_msg("name            %s", vol->name);
-	} else {
-		ubi_msg("the 1st 5 characters of the name: %c%c%c%c%c",
-				vol->name[0], vol->name[1], vol->name[2],
-				vol->name[3], vol->name[4]);
-	}
-	printf("\n");
-}
-
 static void display_volume_info(struct ubi_device *ubi)
 {
 	int i;
@@ -316,7 +290,6 @@ int ubi_volume_continue_write(char *volume, void *buf, size_t size)
 		}
 
 		vol->checked = 1;
-		ubi_gluebi_updated(vol);
 	}
 
 	return 0;
diff --git a/common/cmd_ubifs.c b/common/cmd_ubifs.c
index fdc8bfe..0baa827 100644
--- a/common/cmd_ubifs.c
+++ b/common/cmd_ubifs.c
@@ -37,7 +37,7 @@ int do_ubifs_mount(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		ubifs_initialized = 1;
 	}
 
-	ret = ubifs_mount(vol_name);
+	ret = uboot_ubifs_mount(vol_name);
 	if (ret)
 		return -1;
 
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 31e4289..39daeab 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -1,16 +1,32 @@
 /*
  * MTD device concatenation layer
  *
- * (C) 2002 Robert Kaiser <rkaiser at sysgo.de>
+ * Copyright © 2002 Robert Kaiser <rkaiser at sysgo.de>
+ * Copyright © 2002-2010 David Woodhouse <dwmw2 at infradead.org>
  *
  * NAND support by Christian Gan <cgan at iders.ca>
  *
- * This code is GPL
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
  */
 
-#include <linux/mtd/mtd.h>
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/backing-dev.h>
+#include <asm/div64.h>
+#else
+#include <div64.h>
 #include <linux/compat.h>
+#endif
+
+#include <linux/mtd/mtd.h>
 #include <linux/mtd/concat.h>
+
 #include <ubi_uboot.h>
 
 /*
@@ -51,7 +67,9 @@ concat_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int ret = 0, err;
 	int i;
 
+#ifdef __UBOOT__
 	*retlen = 0;
+#endif
 
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
@@ -105,7 +123,9 @@ concat_write(struct mtd_info *mtd, loff_t to, size_t len,
 	int err = -EINVAL;
 	int i;
 
+#ifdef __UBOOT__
 	*retlen = 0;
+#endif
 
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
@@ -137,6 +157,83 @@ concat_write(struct mtd_info *mtd, loff_t to, size_t len,
 	return err;
 }
 
+#ifndef __UBOOT__
+static int
+concat_writev(struct mtd_info *mtd, const struct kvec *vecs,
+		unsigned long count, loff_t to, size_t * retlen)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	struct kvec *vecs_copy;
+	unsigned long entry_low, entry_high;
+	size_t total_len = 0;
+	int i;
+	int err = -EINVAL;
+
+	/* Calculate total length of data */
+	for (i = 0; i < count; i++)
+		total_len += vecs[i].iov_len;
+
+	/* Check alignment */
+	if (mtd->writesize > 1) {
+		uint64_t __to = to;
+		if (do_div(__to, mtd->writesize) || (total_len % mtd->writesize))
+			return -EINVAL;
+	}
+
+	/* make a copy of vecs */
+	vecs_copy = kmemdup(vecs, sizeof(struct kvec) * count, GFP_KERNEL);
+	if (!vecs_copy)
+		return -ENOMEM;
+
+	entry_low = 0;
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		size_t size, wsize, retsize, old_iov_len;
+
+		if (to >= subdev->size) {
+			to -= subdev->size;
+			continue;
+		}
+
+		size = min_t(uint64_t, total_len, subdev->size - to);
+		wsize = size; /* store for future use */
+
+		entry_high = entry_low;
+		while (entry_high < count) {
+			if (size <= vecs_copy[entry_high].iov_len)
+				break;
+			size -= vecs_copy[entry_high++].iov_len;
+		}
+
+		old_iov_len = vecs_copy[entry_high].iov_len;
+		vecs_copy[entry_high].iov_len = size;
+
+		err = mtd_writev(subdev, &vecs_copy[entry_low],
+				 entry_high - entry_low + 1, to, &retsize);
+
+		vecs_copy[entry_high].iov_len = old_iov_len - size;
+		vecs_copy[entry_high].iov_base += size;
+
+		entry_low = entry_high;
+
+		if (err)
+			break;
+
+		*retlen += retsize;
+		total_len -= wsize;
+
+		if (total_len == 0)
+			break;
+
+		err = -EINVAL;
+		to = 0;
+	}
+
+	kfree(vecs_copy);
+	return err;
+}
+#endif
+
 static int
 concat_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
 {
@@ -204,7 +301,7 @@ concat_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops)
 	if (!(mtd->flags & MTD_WRITEABLE))
 		return -EROFS;
 
-	ops->retlen = 0;
+	ops->retlen = ops->oobretlen = 0;
 
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
@@ -219,7 +316,7 @@ concat_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops)
 			devops.len = subdev->size - to;
 
 		err = mtd_write_oob(subdev, to, &devops);
-		ops->retlen += devops.retlen;
+		ops->retlen += devops.oobretlen;
 		if (err)
 			return err;
 
@@ -243,6 +340,9 @@ concat_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops)
 static void concat_erase_callback(struct erase_info *instr)
 {
 	/* Nothing to do here in U-Boot */
+#ifndef __UBOOT__
+	wake_up((wait_queue_head_t *) instr->priv);
+#endif
 }
 
 static int concat_dev_erase(struct mtd_info *mtd, struct erase_info *erase)
@@ -316,7 +416,7 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
 		 * to-be-erased area begins. Verify that the starting
 		 * offset is aligned to this region's erase size:
 		 */
-		if (instr->addr & (erase_regions[i].erasesize - 1))
+		if (i < 0 || instr->addr & (erase_regions[i].erasesize - 1))
 			return -EINVAL;
 
 		/*
@@ -329,8 +429,8 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
 		/*
 		 * check if the ending offset is aligned to this region's erase size
 		 */
-		if ((instr->addr + instr->len) & (erase_regions[i].erasesize -
-						  1))
+		if (i < 0 || ((instr->addr + instr->len) &
+					(erase_regions[i].erasesize - 1)))
 			return -EINVAL;
 	}
 
@@ -422,7 +522,6 @@ static int concat_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 			size = len;
 
 		err = mtd_lock(subdev, ofs, size);
-
 		if (err)
 			break;
 
@@ -457,7 +556,6 @@ static int concat_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 			size = len;
 
 		err = mtd_unlock(subdev, ofs, size);
-
 		if (err)
 			break;
 
@@ -483,6 +581,32 @@ static void concat_sync(struct mtd_info *mtd)
 	}
 }
 
+#ifndef __UBOOT__
+static int concat_suspend(struct mtd_info *mtd)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int i, rc = 0;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		if ((rc = mtd_suspend(subdev)) < 0)
+			return rc;
+	}
+	return rc;
+}
+
+static void concat_resume(struct mtd_info *mtd)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int i;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		mtd_resume(subdev);
+	}
+}
+#endif
+
 static int concat_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct mtd_concat *concat = CONCAT(mtd);
@@ -511,9 +635,6 @@ static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	struct mtd_concat *concat = CONCAT(mtd);
 	int i, err = -EINVAL;
 
-	if (!mtd_can_have_bb(concat->subdev[0]))
-		return 0;
-
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
 
@@ -532,6 +653,32 @@ static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs)
 }
 
 /*
+ * try to support NOMMU mmaps on concatenated devices
+ * - we don't support subdev spanning as we can't guarantee it'll work
+ */
+static unsigned long concat_get_unmapped_area(struct mtd_info *mtd,
+					      unsigned long len,
+					      unsigned long offset,
+					      unsigned long flags)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int i;
+
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+
+		if (offset >= subdev->size) {
+			offset -= subdev->size;
+			continue;
+		}
+
+		return mtd_get_unmapped_area(subdev, len, offset, flags);
+	}
+
+	return (unsigned long) -ENOSYS;
+}
+
+/*
  * This function constructs a virtual MTD device by concatenating
  * num_devs MTD devices. A pointer to the new device object is
  * stored to *new_dev upon success. This function does _not_
@@ -539,17 +686,22 @@ static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs)
  */
 struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to concatenate */
 				   int num_devs,	/* number of subdevices      */
+#ifndef __UBOOT__
 				   const char *name)
+#else
+				   char *name)
+#endif
 {				/* name for the new device   */
 	int i;
 	size_t size;
 	struct mtd_concat *concat;
 	uint32_t max_erasesize, curr_erasesize;
 	int num_erase_region;
+	int max_writebufsize = 0;
 
 	debug("Concatenating MTD devices:\n");
 	for (i = 0; i < num_devs; i++)
-		debug("(%d): \"%s\"\n", i, subdev[i]->name);
+		printk(KERN_NOTICE "(%d): \"%s\"\n", i, subdev[i]->name);
 	debug("into device \"%s\"\n", name);
 
 	/* allocate the device structure */
@@ -565,16 +717,26 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 
 	/*
 	 * Set up the new "super" device's MTD object structure, check for
-	 * incompatibilites between the subdevices.
+	 * incompatibilities between the subdevices.
 	 */
 	concat->mtd.type = subdev[0]->type;
 	concat->mtd.flags = subdev[0]->flags;
 	concat->mtd.size = subdev[0]->size;
 	concat->mtd.erasesize = subdev[0]->erasesize;
 	concat->mtd.writesize = subdev[0]->writesize;
+
+	for (i = 0; i < num_devs; i++)
+		if (max_writebufsize < subdev[i]->writebufsize)
+			max_writebufsize = subdev[i]->writebufsize;
+	concat->mtd.writebufsize = max_writebufsize;
+
 	concat->mtd.subpage_sft = subdev[0]->subpage_sft;
 	concat->mtd.oobsize = subdev[0]->oobsize;
 	concat->mtd.oobavail = subdev[0]->oobavail;
+#ifndef __UBOOT__
+	if (subdev[0]->_writev)
+		concat->mtd._writev = concat_writev;
+#endif
 	if (subdev[0]->_read_oob)
 		concat->mtd._read_oob = concat_read_oob;
 	if (subdev[0]->_write_oob)
@@ -586,6 +748,10 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 
 	concat->mtd.ecc_stats.badblocks = subdev[0]->ecc_stats.badblocks;
 
+#ifndef __UBOOT__
+	concat->mtd.backing_dev_info = subdev[0]->backing_dev_info;
+#endif
+
 	concat->subdev[0] = subdev[0];
 
 	for (i = 1; i < num_devs; i++) {
@@ -613,6 +779,16 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 				    subdev[i]->flags & MTD_WRITEABLE;
 		}
 
+#ifndef __UBOOT__
+		/* only permit direct mapping if the BDIs are all the same
+		 * - copy-mapping is still permitted
+		 */
+		if (concat->mtd.backing_dev_info !=
+		    subdev[i]->backing_dev_info)
+			concat->mtd.backing_dev_info =
+				&default_backing_dev_info;
+#endif
+
 		concat->mtd.size += subdev[i]->size;
 		concat->mtd.ecc_stats.badblocks +=
 			subdev[i]->ecc_stats.badblocks;
@@ -641,6 +817,11 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 	concat->mtd._sync = concat_sync;
 	concat->mtd._lock = concat_lock;
 	concat->mtd._unlock = concat_unlock;
+#ifndef __UBOOT__
+	concat->mtd._suspend = concat_suspend;
+	concat->mtd._resume = concat_resume;
+#endif
+	concat->mtd._get_unmapped_area = concat_get_unmapped_area;
 
 	/*
 	 * Combine the erase block size info of the subdevices:
@@ -771,3 +952,22 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 
 	return &concat->mtd;
 }
+
+/*
+ * This function destroys an MTD object obtained from concat_mtd_devs()
+ */
+
+void mtd_concat_destroy(struct mtd_info *mtd)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	if (concat->mtd.numeraseregions)
+		kfree(concat->mtd.eraseregions);
+	kfree(concat);
+}
+
+EXPORT_SYMBOL(mtd_concat_create);
+EXPORT_SYMBOL(mtd_concat_destroy);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Kaiser <rkaiser at sysgo.de>");
+MODULE_DESCRIPTION("Generic support for concatenating of MTD devices");
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 0a38fbe..796ac07 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -2,130 +2,767 @@
  * Core registration and callback routines for MTD
  * drivers and users.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2 at infradead.org>
+ * Copyright © 2006      Red Hat UK Limited 
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
  */
 
-#include <linux/mtd/mtd.h>
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/seq_file.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+#include <linux/ioctl.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/idr.h>
+#include <linux/backing-dev.h>
+#include <linux/gfp.h>
+#include <linux/slab.h>
+#else
 #include <linux/compat.h>
+#include <linux/err.h>
 #include <ubi_uboot.h>
+#endif
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include "mtdcore.h"
+
+#ifndef __UBOOT__
+/*
+ * backing device capabilities for non-mappable devices (such as NAND flash)
+ * - permits private mappings, copies are taken of the data
+ */
+static struct backing_dev_info mtd_bdi_unmappable = {
+	.capabilities	= BDI_CAP_MAP_COPY,
+};
+
+/*
+ * backing device capabilities for R/O mappable devices (such as ROM)
+ * - permits private mappings, copies are taken of the data
+ * - permits non-writable shared mappings
+ */
+static struct backing_dev_info mtd_bdi_ro_mappable = {
+	.capabilities	= (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
+			   BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP),
+};
+
+/*
+ * backing device capabilities for writable mappable devices (such as RAM)
+ * - permits private mappings, copies are taken of the data
+ * - permits non-writable shared mappings
+ */
+static struct backing_dev_info mtd_bdi_rw_mappable = {
+	.capabilities	= (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
+			   BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP |
+			   BDI_CAP_WRITE_MAP),
+};
+
+static int mtd_cls_suspend(struct device *dev, pm_message_t state);
+static int mtd_cls_resume(struct device *dev);
 
+static struct class mtd_class = {
+	.name = "mtd",
+	.owner = THIS_MODULE,
+	.suspend = mtd_cls_suspend,
+	.resume = mtd_cls_resume,
+};
+#else
 struct mtd_info *mtd_table[MAX_MTD_DEVICES];
 
+#define MAX_IDR_ID	64
+
+struct idr_layer {
+	int	used;
+	void	*ptr;
+};
+
+struct idr {
+	struct idr_layer id[MAX_IDR_ID];
+};
+
+#define DEFINE_IDR(name)	struct idr name;
+
+void idr_remove(struct idr *idp, int id)
+{
+	if (idp->id[id].used)
+		idp->id[id].used = 0;
+
+	return;
+}
+void *idr_find(struct idr *idp, int id)
+{
+	if (idp->id[id].used)
+		return idp->id[id].ptr;
+
+	return NULL;
+}
+
+void *idr_get_next(struct idr *idp, int *next)
+{
+	void *ret;
+	int id = *next;
+
+	ret = idr_find(idp, id);
+	if (ret) {
+		id ++;
+		if (!idp->id[id].used)
+			id = 0;
+		*next = id;
+	} else {
+		*next = 0;
+	}
+	
+	return ret;
+}
+
+int idr_alloc(struct idr *idp, void *ptr, int start, int end, gfp_t gfp_mask)
+{
+	struct idr_layer *idl;
+	int i = 0;
+
+	while (i < MAX_IDR_ID) {
+		idl = &idp->id[i];
+		if (idl->used == 0) {
+			idl->used = 1;
+			idl->ptr = ptr;
+			return i;
+		}
+		i++;
+	}
+	return -ENOSPC;
+}
+#endif
+
+static DEFINE_IDR(mtd_idr);
+
+/* These are exported solely for the purpose of mtd_blkdevs.c. You
+   should not use them for _anything_ else */
+DEFINE_MUTEX(mtd_table_mutex);
+EXPORT_SYMBOL_GPL(mtd_table_mutex);
+
+struct mtd_info *__mtd_next_device(int i)
+{
+	return idr_get_next(&mtd_idr, &i);
+}
+EXPORT_SYMBOL_GPL(__mtd_next_device);
+
+#ifndef __UBOOT__
+static LIST_HEAD(mtd_notifiers);
+
+
+#define MTD_DEVT(index) MKDEV(MTD_CHAR_MAJOR, (index)*2)
+
+/* REVISIT once MTD uses the driver model better, whoever allocates
+ * the mtd_info will probably want to use the release() hook...
+ */
+static void mtd_release(struct device *dev)
+{
+	struct mtd_info __maybe_unused *mtd = dev_get_drvdata(dev);
+	dev_t index = MTD_DEVT(mtd->index);
+
+	/* remove /dev/mtdXro node if needed */
+	if (index)
+		device_destroy(&mtd_class, index + 1);
+}
+
+static int mtd_cls_suspend(struct device *dev, pm_message_t state)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return mtd ? mtd_suspend(mtd) : 0;
+}
+
+static int mtd_cls_resume(struct device *dev)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	if (mtd)
+		mtd_resume(mtd);
+	return 0;
+}
+
+static ssize_t mtd_type_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+	char *type;
+
+	switch (mtd->type) {
+	case MTD_ABSENT:
+		type = "absent";
+		break;
+	case MTD_RAM:
+		type = "ram";
+		break;
+	case MTD_ROM:
+		type = "rom";
+		break;
+	case MTD_NORFLASH:
+		type = "nor";
+		break;
+	case MTD_NANDFLASH:
+		type = "nand";
+		break;
+	case MTD_DATAFLASH:
+		type = "dataflash";
+		break;
+	case MTD_UBIVOLUME:
+		type = "ubi";
+		break;
+	case MTD_MLCNANDFLASH:
+		type = "mlc-nand";
+		break;
+	default:
+		type = "unknown";
+	}
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", type);
+}
+static DEVICE_ATTR(type, S_IRUGO, mtd_type_show, NULL);
+
+static ssize_t mtd_flags_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "0x%lx\n", (unsigned long)mtd->flags);
+
+}
+static DEVICE_ATTR(flags, S_IRUGO, mtd_flags_show, NULL);
+
+static ssize_t mtd_size_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%llu\n",
+		(unsigned long long)mtd->size);
+
+}
+static DEVICE_ATTR(size, S_IRUGO, mtd_size_show, NULL);
+
+static ssize_t mtd_erasesize_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->erasesize);
+
+}
+static DEVICE_ATTR(erasesize, S_IRUGO, mtd_erasesize_show, NULL);
+
+static ssize_t mtd_writesize_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->writesize);
+
+}
+static DEVICE_ATTR(writesize, S_IRUGO, mtd_writesize_show, NULL);
+
+static ssize_t mtd_subpagesize_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+	unsigned int subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", subpagesize);
+
+}
+static DEVICE_ATTR(subpagesize, S_IRUGO, mtd_subpagesize_show, NULL);
+
+static ssize_t mtd_oobsize_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->oobsize);
+
+}
+static DEVICE_ATTR(oobsize, S_IRUGO, mtd_oobsize_show, NULL);
+
+static ssize_t mtd_numeraseregions_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", mtd->numeraseregions);
+
+}
+static DEVICE_ATTR(numeraseregions, S_IRUGO, mtd_numeraseregions_show,
+	NULL);
+
+static ssize_t mtd_name_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", mtd->name);
+
+}
+static DEVICE_ATTR(name, S_IRUGO, mtd_name_show, NULL);
+
+static ssize_t mtd_ecc_strength_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", mtd->ecc_strength);
+}
+static DEVICE_ATTR(ecc_strength, S_IRUGO, mtd_ecc_strength_show, NULL);
+
+static ssize_t mtd_bitflip_threshold_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", mtd->bitflip_threshold);
+}
+
+static ssize_t mtd_bitflip_threshold_store(struct device *dev,
+					   struct device_attribute *attr,
+					   const char *buf, size_t count)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+	unsigned int bitflip_threshold;
+	int retval;
+
+	retval = kstrtouint(buf, 0, &bitflip_threshold);
+	if (retval)
+		return retval;
+
+	mtd->bitflip_threshold = bitflip_threshold;
+	return count;
+}
+static DEVICE_ATTR(bitflip_threshold, S_IRUGO | S_IWUSR,
+		   mtd_bitflip_threshold_show,
+		   mtd_bitflip_threshold_store);
+
+static ssize_t mtd_ecc_step_size_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", mtd->ecc_step_size);
+
+}
+static DEVICE_ATTR(ecc_step_size, S_IRUGO, mtd_ecc_step_size_show, NULL);
+
+static struct attribute *mtd_attrs[] = {
+	&dev_attr_type.attr,
+	&dev_attr_flags.attr,
+	&dev_attr_size.attr,
+	&dev_attr_erasesize.attr,
+	&dev_attr_writesize.attr,
+	&dev_attr_subpagesize.attr,
+	&dev_attr_oobsize.attr,
+	&dev_attr_numeraseregions.attr,
+	&dev_attr_name.attr,
+	&dev_attr_ecc_strength.attr,
+	&dev_attr_ecc_step_size.attr,
+	&dev_attr_bitflip_threshold.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(mtd);
+
+static struct device_type mtd_devtype = {
+	.name		= "mtd",
+	.groups		= mtd_groups,
+	.release	= mtd_release,
+};
+#endif
+
+/**
+ *	add_mtd_device - register an MTD device
+ *	@mtd: pointer to new MTD device info structure
+ *
+ *	Add a device to the list of MTD devices present in the system, and
+ *	notify each currently active MTD 'user' of its arrival. Returns
+ *	zero on success or 1 on failure, which currently will only happen
+ *	if there is insufficient memory or a sysfs error.
+ */
+
 int add_mtd_device(struct mtd_info *mtd)
 {
-	int i;
+#ifndef __UBOOT__
+	struct mtd_notifier *not;
+#endif
+	int i, error;
+
+#ifndef __UBOOT__
+	if (!mtd->backing_dev_info) {
+		switch (mtd->type) {
+		case MTD_RAM:
+			mtd->backing_dev_info = &mtd_bdi_rw_mappable;
+			break;
+		case MTD_ROM:
+			mtd->backing_dev_info = &mtd_bdi_ro_mappable;
+			break;
+		default:
+			mtd->backing_dev_info = &mtd_bdi_unmappable;
+			break;
+		}
+	}
+#endif
 
 	BUG_ON(mtd->writesize == 0);
+	mutex_lock(&mtd_table_mutex);
 
-	for (i = 0; i < MAX_MTD_DEVICES; i++)
-		if (!mtd_table[i]) {
-			mtd_table[i] = mtd;
-			mtd->index = i;
-			mtd->usecount = 0;
+	i = idr_alloc(&mtd_idr, mtd, 0, 0, GFP_KERNEL);
+	if (i < 0)
+		goto fail_locked;
 
-			/* default value if not set by driver */
-			if (mtd->bitflip_threshold == 0)
-				mtd->bitflip_threshold = mtd->ecc_strength;
+	mtd->index = i;
+	mtd->usecount = 0;
 
+	/* default value if not set by driver */
+	if (mtd->bitflip_threshold == 0)
+		mtd->bitflip_threshold = mtd->ecc_strength;
 
-			/* No need to get a refcount on the module containing
-			   the notifier, since we hold the mtd_table_mutex */
+	if (is_power_of_2(mtd->erasesize))
+		mtd->erasesize_shift = ffs(mtd->erasesize) - 1;
+	else
+		mtd->erasesize_shift = 0;
 
-			/* We _know_ we aren't being removed, because
-			   our caller is still holding us here. So none
-			   of this try_ nonsense, and no bitching about it
-			   either. :) */
-			return 0;
-		}
+	if (is_power_of_2(mtd->writesize))
+		mtd->writesize_shift = ffs(mtd->writesize) - 1;
+	else
+		mtd->writesize_shift = 0;
+
+	mtd->erasesize_mask = (1 << mtd->erasesize_shift) - 1;
+	mtd->writesize_mask = (1 << mtd->writesize_shift) - 1;
+
+	/* Some chips always power up locked. Unlock them now */
+	if ((mtd->flags & MTD_WRITEABLE) && (mtd->flags & MTD_POWERUP_LOCK)) {
+		error = mtd_unlock(mtd, 0, mtd->size);
+		if (error && error != -EOPNOTSUPP)
+			printk(KERN_WARNING
+			       "%s: unlock failed, writes may not work\n",
+			       mtd->name);
+	}
+
+#ifndef __UBOOT__
+	/* Caller should have set dev.parent to match the
+	 * physical device.
+	 */
+	mtd->dev.type = &mtd_devtype;
+	mtd->dev.class = &mtd_class;
+	mtd->dev.devt = MTD_DEVT(i);
+	dev_set_name(&mtd->dev, "mtd%d", i);
+	dev_set_drvdata(&mtd->dev, mtd);
+	if (device_register(&mtd->dev) != 0)
+		goto fail_added;
 
+	if (MTD_DEVT(i))
+		device_create(&mtd_class, mtd->dev.parent,
+			      MTD_DEVT(i) + 1,
+			      NULL, "mtd%dro", i);
+
+	pr_debug("mtd: Giving out device %d to %s\n", i, mtd->name);
+	/* No need to get a refcount on the module containing
+	   the notifier, since we hold the mtd_table_mutex */
+	list_for_each_entry(not, &mtd_notifiers, list)
+		not->add(mtd);
+#endif
+
+	mutex_unlock(&mtd_table_mutex);
+	/* We _know_ we aren't being removed, because
+	   our caller is still holding us here. So none
+	   of this try_ nonsense, and no bitching about it
+	   either. :) */
+	__module_get(THIS_MODULE);
+	return 0;
+
+#ifndef __UBOOT__
+fail_added:
+	idr_remove(&mtd_idr, i);
+#endif
+fail_locked:
+	mutex_unlock(&mtd_table_mutex);
 	return 1;
 }
 
 /**
- *      del_mtd_device - unregister an MTD device
- *      @mtd: pointer to MTD device info structure
+ *	del_mtd_device - unregister an MTD device
+ *	@mtd: pointer to MTD device info structure
  *
- *      Remove a device from the list of MTD devices present in the system,
- *      and notify each currently active MTD 'user' of its departure.
- *      Returns zero on success or 1 on failure, which currently will happen
- *      if the requested device does not appear to be present in the list.
+ *	Remove a device from the list of MTD devices present in the system,
+ *	and notify each currently active MTD 'user' of its departure.
+ *	Returns zero on success or 1 on failure, which currently will happen
+ *	if the requested device does not appear to be present in the list.
  */
+
 int del_mtd_device(struct mtd_info *mtd)
 {
 	int ret;
+#ifndef __UBOOT__
+	struct mtd_notifier *not;
+#endif
+
+	mutex_lock(&mtd_table_mutex);
 
-	if (mtd_table[mtd->index] != mtd) {
+	if (idr_find(&mtd_idr, mtd->index) != mtd) {
 		ret = -ENODEV;
-	} else if (mtd->usecount) {
-		printk(KERN_NOTICE "Removing MTD device #%d (%s)"
-				" with use count %d\n",
-				mtd->index, mtd->name, mtd->usecount);
+		goto out_error;
+	}
+
+#ifndef __UBOOT__
+	/* No need to get a refcount on the module containing
+		the notifier, since we hold the mtd_table_mutex */
+	list_for_each_entry(not, &mtd_notifiers, list)
+		not->remove(mtd);
+#endif
+
+	if (mtd->usecount) {
+		printk(KERN_NOTICE "Removing MTD device #%d (%s) with use count %d\n",
+		       mtd->index, mtd->name, mtd->usecount);
 		ret = -EBUSY;
 	} else {
-		/* No need to get a refcount on the module containing
-		 * the notifier, since we hold the mtd_table_mutex */
-		mtd_table[mtd->index] = NULL;
+#ifndef __UBOOT__
+		device_unregister(&mtd->dev);
+#endif
+
+		idr_remove(&mtd_idr, mtd->index);
 
+		module_put(THIS_MODULE);
 		ret = 0;
 	}
 
+out_error:
+	mutex_unlock(&mtd_table_mutex);
 	return ret;
 }
 
+#ifndef __UBOOT__
+/**
+ * mtd_device_parse_register - parse partitions and register an MTD device.
+ *
+ * @mtd: the MTD device to register
+ * @types: the list of MTD partition probes to try, see
+ *         'parse_mtd_partitions()' for more information
+ * @parser_data: MTD partition parser-specific data
+ * @parts: fallback partition information to register, if parsing fails;
+ *         only valid if %nr_parts > %0
+ * @nr_parts: the number of partitions in parts, if zero then the full
+ *            MTD device is registered if no partition info is found
+ *
+ * This function aggregates MTD partitions parsing (done by
+ * 'parse_mtd_partitions()') and MTD device and partitions registering. It
+ * basically follows the most common pattern found in many MTD drivers:
+ *
+ * * It first tries to probe partitions on MTD device @mtd using parsers
+ *   specified in @types (if @types is %NULL, then the default list of parsers
+ *   is used, see 'parse_mtd_partitions()' for more information). If none are
+ *   found this functions tries to fallback to information specified in
+ *   @parts/@nr_parts.
+ * * If any partitioning info was found, this function registers the found
+ *   partitions.
+ * * If no partitions were found this function just registers the MTD device
+ *   @mtd and exits.
+ *
+ * Returns zero in case of success and a negative error code in case of failure.
+ */
+int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
+			      struct mtd_part_parser_data *parser_data,
+			      const struct mtd_partition *parts,
+			      int nr_parts)
+{
+	int err;
+	struct mtd_partition *real_parts;
+
+	err = parse_mtd_partitions(mtd, types, &real_parts, parser_data);
+	if (err <= 0 && nr_parts && parts) {
+		real_parts = kmemdup(parts, sizeof(*parts) * nr_parts,
+				     GFP_KERNEL);
+		if (!real_parts)
+			err = -ENOMEM;
+		else
+			err = nr_parts;
+	}
+
+	if (err > 0) {
+		err = add_mtd_partitions(mtd, real_parts, err);
+		kfree(real_parts);
+	} else if (err == 0) {
+		err = add_mtd_device(mtd);
+		if (err == 1)
+			err = -ENODEV;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(mtd_device_parse_register);
+
+/**
+ * mtd_device_unregister - unregister an existing MTD device.
+ *
+ * @master: the MTD device to unregister.  This will unregister both the master
+ *          and any partitions if registered.
+ */
+int mtd_device_unregister(struct mtd_info *master)
+{
+	int err;
+
+	err = del_mtd_partitions(master);
+	if (err)
+		return err;
+
+	if (!device_is_registered(&master->dev))
+		return 0;
+
+	return del_mtd_device(master);
+}
+EXPORT_SYMBOL_GPL(mtd_device_unregister);
+
+/**
+ *	register_mtd_user - register a 'user' of MTD devices.
+ *	@new: pointer to notifier info structure
+ *
+ *	Registers a pair of callbacks function to be called upon addition
+ *	or removal of MTD devices. Causes the 'add' callback to be immediately
+ *	invoked for each MTD device currently present in the system.
+ */
+void register_mtd_user (struct mtd_notifier *new)
+{
+	struct mtd_info *mtd;
+
+	mutex_lock(&mtd_table_mutex);
+
+	list_add(&new->list, &mtd_notifiers);
+
+	__module_get(THIS_MODULE);
+
+	mtd_for_each_device(mtd)
+		new->add(mtd);
+
+	mutex_unlock(&mtd_table_mutex);
+}
+EXPORT_SYMBOL_GPL(register_mtd_user);
+
+/**
+ *	unregister_mtd_user - unregister a 'user' of MTD devices.
+ *	@old: pointer to notifier info structure
+ *
+ *	Removes a callback function pair from the list of 'users' to be
+ *	notified upon addition or removal of MTD devices. Causes the
+ *	'remove' callback to be immediately invoked for each MTD device
+ *	currently present in the system.
+ */
+int unregister_mtd_user (struct mtd_notifier *old)
+{
+	struct mtd_info *mtd;
+
+	mutex_lock(&mtd_table_mutex);
+
+	module_put(THIS_MODULE);
+
+	mtd_for_each_device(mtd)
+		old->remove(mtd);
+
+	list_del(&old->list);
+	mutex_unlock(&mtd_table_mutex);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(unregister_mtd_user);
+#endif
+
 /**
  *	get_mtd_device - obtain a validated handle for an MTD device
  *	@mtd: last known address of the required MTD device
  *	@num: internal device number of the required MTD device
  *
  *	Given a number and NULL address, return the num'th entry in the device
- *      table, if any.  Given an address and num == -1, search the device table
- *      for a device with that address and return if it's still present. Given
- *      both, return the num'th driver only if its address matches. Return
- *      error code if not.
+ *	table, if any.	Given an address and num == -1, search the device table
+ *	for a device with that address and return if it's still present. Given
+ *	both, return the num'th driver only if its address matches. Return
+ *	error code if not.
  */
 struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num)
 {
-	struct mtd_info *ret = NULL;
-	int i, err = -ENODEV;
+	struct mtd_info *ret = NULL, *other;
+	int err = -ENODEV;
+
+	mutex_lock(&mtd_table_mutex);
 
 	if (num == -1) {
-		for (i = 0; i < MAX_MTD_DEVICES; i++)
-			if (mtd_table[i] == mtd)
-				ret = mtd_table[i];
-	} else if (num < MAX_MTD_DEVICES) {
-		ret = mtd_table[num];
+		mtd_for_each_device(other) {
+			if (other == mtd) {
+				ret = mtd;
+				break;
+			}
+		}
+	} else if (num >= 0) {
+		ret = idr_find(&mtd_idr, num);
 		if (mtd && mtd != ret)
 			ret = NULL;
 	}
 
-	if (!ret)
-		goto out_unlock;
+	if (!ret) {
+		ret = ERR_PTR(err);
+		goto out;
+	}
 
-	ret->usecount++;
+	err = __get_mtd_device(ret);
+	if (err)
+		ret = ERR_PTR(err);
+out:
+	mutex_unlock(&mtd_table_mutex);
 	return ret;
+}
+EXPORT_SYMBOL_GPL(get_mtd_device);
 
-out_unlock:
-	return ERR_PTR(err);
+
+int __get_mtd_device(struct mtd_info *mtd)
+{
+	int err;
+
+	if (!try_module_get(mtd->owner))
+		return -ENODEV;
+
+	if (mtd->_get_device) {
+		err = mtd->_get_device(mtd);
+
+		if (err) {
+			module_put(mtd->owner);
+			return err;
+		}
+	}
+	mtd->usecount++;
+	return 0;
 }
+EXPORT_SYMBOL_GPL(__get_mtd_device);
 
 /**
- *      get_mtd_device_nm - obtain a validated handle for an MTD device by
- *      device name
- *      @name: MTD device name to open
+ *	get_mtd_device_nm - obtain a validated handle for an MTD device by
+ *	device name
+ *	@name: MTD device name to open
  *
- *      This function returns MTD device description structure in case of
- *      success and an error code in case of failure.
+ * 	This function returns MTD device description structure in case of
+ * 	success and an error code in case of failure.
  */
 struct mtd_info *get_mtd_device_nm(const char *name)
 {
-	int i, err = -ENODEV;
-	struct mtd_info *mtd = NULL;
+	int err = -ENODEV;
+	struct mtd_info *mtd = NULL, *other;
+
+	mutex_lock(&mtd_table_mutex);
 
-	for (i = 0; i < MAX_MTD_DEVICES; i++) {
-		if (mtd_table[i] && !strcmp(name, mtd_table[i]->name)) {
-			mtd = mtd_table[i];
+	mtd_for_each_device(other) {
+		if (!strcmp(name, other->name)) {
+			mtd = other;
 			break;
 		}
 	}
@@ -133,20 +770,18 @@ struct mtd_info *get_mtd_device_nm(const char *name)
 	if (!mtd)
 		goto out_unlock;
 
-	mtd->usecount++;
+	err = __get_mtd_device(mtd);
+	if (err)
+		goto out_unlock;
+
+	mutex_unlock(&mtd_table_mutex);
 	return mtd;
 
 out_unlock:
+	mutex_unlock(&mtd_table_mutex);
 	return ERR_PTR(err);
 }
-
-void put_mtd_device(struct mtd_info *mtd)
-{
-	int c;
-
-	c = --mtd->usecount;
-	BUG_ON(c < 0);
-}
+EXPORT_SYMBOL_GPL(get_mtd_device_nm);
 
 #if defined(CONFIG_CMD_MTDPARTS_SPREAD)
 /**
@@ -192,7 +827,28 @@ void mtd_get_len_incl_bad(struct mtd_info *mtd, uint64_t offset,
 }
 #endif /* defined(CONFIG_CMD_MTDPARTS_SPREAD) */
 
- /*
+void put_mtd_device(struct mtd_info *mtd)
+{
+	mutex_lock(&mtd_table_mutex);
+	__put_mtd_device(mtd);
+	mutex_unlock(&mtd_table_mutex);
+
+}
+EXPORT_SYMBOL_GPL(put_mtd_device);
+
+void __put_mtd_device(struct mtd_info *mtd)
+{
+	--mtd->usecount;
+	BUG_ON(mtd->usecount < 0);
+
+	if (mtd->_put_device)
+		mtd->_put_device(mtd);
+
+	module_put(mtd->owner);
+}
+EXPORT_SYMBOL_GPL(__put_mtd_device);
+
+/*
  * Erase is an asynchronous operation.  Device drivers are supposed
  * to call instr->callback() whenever the operation completes, even
  * if it completes with a failure.
@@ -213,11 +869,64 @@ int mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
 	}
 	return mtd->_erase(mtd, instr);
 }
+EXPORT_SYMBOL_GPL(mtd_erase);
+
+#ifndef __UBOOT__
+/*
+ * This stuff for eXecute-In-Place. phys is optional and may be set to NULL.
+ */
+int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+	      void **virt, resource_size_t *phys)
+{
+	*retlen = 0;
+	*virt = NULL;
+	if (phys)
+		*phys = 0;
+	if (!mtd->_point)
+		return -EOPNOTSUPP;
+	if (from < 0 || from > mtd->size || len > mtd->size - from)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_point(mtd, from, len, retlen, virt, phys);
+}
+EXPORT_SYMBOL_GPL(mtd_point);
+
+/* We probably shouldn't allow XIP if the unpoint isn't a NULL */
+int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+{
+	if (!mtd->_point)
+		return -EOPNOTSUPP;
+	if (from < 0 || from > mtd->size || len > mtd->size - from)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_unpoint(mtd, from, len);
+}
+EXPORT_SYMBOL_GPL(mtd_unpoint);
+#endif
+
+/*
+ * Allow NOMMU mmap() to directly map the device (if not NULL)
+ * - return the address to which the offset maps
+ * - return -ENOSYS to indicate refusal to do the mapping
+ */
+unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len,
+				    unsigned long offset, unsigned long flags)
+{
+	if (!mtd->_get_unmapped_area)
+		return -EOPNOTSUPP;
+	if (offset > mtd->size || len > mtd->size - offset)
+		return -EINVAL;
+	return mtd->_get_unmapped_area(mtd, len, offset, flags);
+}
+EXPORT_SYMBOL_GPL(mtd_get_unmapped_area);
 
 int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
 	     u_char *buf)
 {
 	int ret_code;
+	*retlen = 0;
 	if (from < 0 || from > mtd->size || len > mtd->size - from)
 		return -EINVAL;
 	if (!len)
@@ -235,6 +944,7 @@ int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
 		return 0;	/* device lacks ecc */
 	return ret_code >= mtd->bitflip_threshold ? -EUCLEAN : 0;
 }
+EXPORT_SYMBOL_GPL(mtd_read);
 
 int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
 	      const u_char *buf)
@@ -248,6 +958,7 @@ int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
 		return 0;
 	return mtd->_write(mtd, to, len, retlen, buf);
 }
+EXPORT_SYMBOL_GPL(mtd_write);
 
 /*
  * In blackbox flight recorder like scenarios we want to make successful writes
@@ -270,14 +981,28 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
 		return 0;
 	return mtd->_panic_write(mtd, to, len, retlen, buf);
 }
+EXPORT_SYMBOL_GPL(mtd_panic_write);
 
 int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
 {
+	int ret_code;
 	ops->retlen = ops->oobretlen = 0;
 	if (!mtd->_read_oob)
 		return -EOPNOTSUPP;
-	return mtd->_read_oob(mtd, from, ops);
+	/*
+	 * In cases where ops->datbuf != NULL, mtd->_read_oob() has semantics
+	 * similar to mtd->_read(), returning a non-negative integer
+	 * representing max bitflips. In other cases, mtd->_read_oob() may
+	 * return -EUCLEAN. In all cases, perform similar logic to mtd_read().
+	 */
+	ret_code = mtd->_read_oob(mtd, from, ops);
+	if (unlikely(ret_code < 0))
+		return ret_code;
+	if (mtd->ecc_strength == 0)
+		return 0;	/* device lacks ecc */
+	return ret_code >= mtd->bitflip_threshold ? -EUCLEAN : 0;
 }
+EXPORT_SYMBOL_GPL(mtd_read_oob);
 
 /*
  * Method to access the protection register area, present in some flash
@@ -293,6 +1018,7 @@ int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
 		return 0;
 	return mtd->_get_fact_prot_info(mtd, buf, len);
 }
+EXPORT_SYMBOL_GPL(mtd_get_fact_prot_info);
 
 int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
 			   size_t *retlen, u_char *buf)
@@ -304,6 +1030,7 @@ int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
 		return 0;
 	return mtd->_read_fact_prot_reg(mtd, from, len, retlen, buf);
 }
+EXPORT_SYMBOL_GPL(mtd_read_fact_prot_reg);
 
 int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
 			   size_t len)
@@ -314,6 +1041,7 @@ int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
 		return 0;
 	return mtd->_get_user_prot_info(mtd, buf, len);
 }
+EXPORT_SYMBOL_GPL(mtd_get_user_prot_info);
 
 int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
 			   size_t *retlen, u_char *buf)
@@ -325,6 +1053,7 @@ int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
 		return 0;
 	return mtd->_read_user_prot_reg(mtd, from, len, retlen, buf);
 }
+EXPORT_SYMBOL_GPL(mtd_read_user_prot_reg);
 
 int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
 			    size_t *retlen, u_char *buf)
@@ -336,6 +1065,7 @@ int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
 		return 0;
 	return mtd->_write_user_prot_reg(mtd, to, len, retlen, buf);
 }
+EXPORT_SYMBOL_GPL(mtd_write_user_prot_reg);
 
 int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len)
 {
@@ -345,6 +1075,7 @@ int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len)
 		return 0;
 	return mtd->_lock_user_prot_reg(mtd, from, len);
 }
+EXPORT_SYMBOL_GPL(mtd_lock_user_prot_reg);
 
 /* Chip-supported device locking */
 int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
@@ -357,6 +1088,7 @@ int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 		return 0;
 	return mtd->_lock(mtd, ofs, len);
 }
+EXPORT_SYMBOL_GPL(mtd_lock);
 
 int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
@@ -368,6 +1100,19 @@ int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 		return 0;
 	return mtd->_unlock(mtd, ofs, len);
 }
+EXPORT_SYMBOL_GPL(mtd_unlock);
+
+int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	if (!mtd->_is_locked)
+		return -EOPNOTSUPP;
+	if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_is_locked(mtd, ofs, len);
+}
+EXPORT_SYMBOL_GPL(mtd_is_locked);
 
 int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
@@ -377,6 +1122,7 @@ int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs)
 		return -EINVAL;
 	return mtd->_block_isbad(mtd, ofs);
 }
+EXPORT_SYMBOL_GPL(mtd_block_isbad);
 
 int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
@@ -388,3 +1134,225 @@ int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs)
 		return -EROFS;
 	return mtd->_block_markbad(mtd, ofs);
 }
+EXPORT_SYMBOL_GPL(mtd_block_markbad);
+
+#ifndef __UBOOT__
+/*
+ * default_mtd_writev - the default writev method
+ * @mtd: mtd device description object pointer
+ * @vecs: the vectors to write
+ * @count: count of vectors in @vecs
+ * @to: the MTD device offset to write to
+ * @retlen: on exit contains the count of bytes written to the MTD device.
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
+			      unsigned long count, loff_t to, size_t *retlen)
+{
+	unsigned long i;
+	size_t totlen = 0, thislen;
+	int ret = 0;
+
+	for (i = 0; i < count; i++) {
+		if (!vecs[i].iov_len)
+			continue;
+		ret = mtd_write(mtd, to, vecs[i].iov_len, &thislen,
+				vecs[i].iov_base);
+		totlen += thislen;
+		if (ret || thislen != vecs[i].iov_len)
+			break;
+		to += vecs[i].iov_len;
+	}
+	*retlen = totlen;
+	return ret;
+}
+
+/*
+ * mtd_writev - the vector-based MTD write method
+ * @mtd: mtd device description object pointer
+ * @vecs: the vectors to write
+ * @count: count of vectors in @vecs
+ * @to: the MTD device offset to write to
+ * @retlen: on exit contains the count of bytes written to the MTD device.
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
+	       unsigned long count, loff_t to, size_t *retlen)
+{
+	*retlen = 0;
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (!mtd->_writev)
+		return default_mtd_writev(mtd, vecs, count, to, retlen);
+	return mtd->_writev(mtd, vecs, count, to, retlen);
+}
+EXPORT_SYMBOL_GPL(mtd_writev);
+
+/**
+ * mtd_kmalloc_up_to - allocate a contiguous buffer up to the specified size
+ * @mtd: mtd device description object pointer
+ * @size: a pointer to the ideal or maximum size of the allocation, points
+ *        to the actual allocation size on success.
+ *
+ * This routine attempts to allocate a contiguous kernel buffer up to
+ * the specified size, backing off the size of the request exponentially
+ * until the request succeeds or until the allocation size falls below
+ * the system page size. This attempts to make sure it does not adversely
+ * impact system performance, so when allocating more than one page, we
+ * ask the memory allocator to avoid re-trying, swapping, writing back
+ * or performing I/O.
+ *
+ * Note, this function also makes sure that the allocated buffer is aligned to
+ * the MTD device's min. I/O unit, i.e. the "mtd->writesize" value.
+ *
+ * This is called, for example by mtd_{read,write} and jffs2_scan_medium,
+ * to handle smaller (i.e. degraded) buffer allocations under low- or
+ * fragmented-memory situations where such reduced allocations, from a
+ * requested ideal, are allowed.
+ *
+ * Returns a pointer to the allocated buffer on success; otherwise, NULL.
+ */
+void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size)
+{
+	gfp_t flags = __GFP_NOWARN | __GFP_WAIT |
+		       __GFP_NORETRY | __GFP_NO_KSWAPD;
+	size_t min_alloc = max_t(size_t, mtd->writesize, PAGE_SIZE);
+	void *kbuf;
+
+	*size = min_t(size_t, *size, KMALLOC_MAX_SIZE);
+
+	while (*size > min_alloc) {
+		kbuf = kmalloc(*size, flags);
+		if (kbuf)
+			return kbuf;
+
+		*size >>= 1;
+		*size = ALIGN(*size, mtd->writesize);
+	}
+
+	/*
+	 * For the last resort allocation allow 'kmalloc()' to do all sorts of
+	 * things (write-back, dropping caches, etc) by using GFP_KERNEL.
+	 */
+	return kmalloc(*size, GFP_KERNEL);
+}
+EXPORT_SYMBOL_GPL(mtd_kmalloc_up_to);
+#endif
+
+#ifdef CONFIG_PROC_FS
+
+/*====================================================================*/
+/* Support for /proc/mtd */
+
+static int mtd_proc_show(struct seq_file *m, void *v)
+{
+	struct mtd_info *mtd;
+
+	seq_puts(m, "dev:    size   erasesize  name\n");
+	mutex_lock(&mtd_table_mutex);
+	mtd_for_each_device(mtd) {
+		seq_printf(m, "mtd%d: %8.8llx %8.8x \"%s\"\n",
+			   mtd->index, (unsigned long long)mtd->size,
+			   mtd->erasesize, mtd->name);
+	}
+	mutex_unlock(&mtd_table_mutex);
+	return 0;
+}
+
+static int mtd_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mtd_proc_show, NULL);
+}
+
+static const struct file_operations mtd_proc_ops = {
+	.open		= mtd_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+#endif /* CONFIG_PROC_FS */
+
+/*====================================================================*/
+/* Init code */
+
+#ifndef __UBOOT__
+static int __init mtd_bdi_init(struct backing_dev_info *bdi, const char *name)
+{
+	int ret;
+
+	ret = bdi_init(bdi);
+	if (!ret)
+		ret = bdi_register(bdi, NULL, "%s", name);
+
+	if (ret)
+		bdi_destroy(bdi);
+
+	return ret;
+}
+
+static struct proc_dir_entry *proc_mtd;
+
+static int __init init_mtd(void)
+{
+	int ret;
+
+	ret = class_register(&mtd_class);
+	if (ret)
+		goto err_reg;
+
+	ret = mtd_bdi_init(&mtd_bdi_unmappable, "mtd-unmap");
+	if (ret)
+		goto err_bdi1;
+
+	ret = mtd_bdi_init(&mtd_bdi_ro_mappable, "mtd-romap");
+	if (ret)
+		goto err_bdi2;
+
+	ret = mtd_bdi_init(&mtd_bdi_rw_mappable, "mtd-rwmap");
+	if (ret)
+		goto err_bdi3;
+
+	proc_mtd = proc_create("mtd", 0, NULL, &mtd_proc_ops);
+
+	ret = init_mtdchar();
+	if (ret)
+		goto out_procfs;
+
+	return 0;
+
+out_procfs:
+	if (proc_mtd)
+		remove_proc_entry("mtd", NULL);
+err_bdi3:
+	bdi_destroy(&mtd_bdi_ro_mappable);
+err_bdi2:
+	bdi_destroy(&mtd_bdi_unmappable);
+err_bdi1:
+	class_unregister(&mtd_class);
+err_reg:
+	pr_err("Error registering mtd class or bdi: %d\n", ret);
+	return ret;
+}
+
+static void __exit cleanup_mtd(void)
+{
+	cleanup_mtdchar();
+	if (proc_mtd)
+		remove_proc_entry("mtd", NULL);
+	class_unregister(&mtd_class);
+	bdi_destroy(&mtd_bdi_unmappable);
+	bdi_destroy(&mtd_bdi_ro_mappable);
+	bdi_destroy(&mtd_bdi_rw_mappable);
+}
+
+module_init(init_mtd);
+module_exit(cleanup_mtd);
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2 at infradead.org>");
+MODULE_DESCRIPTION("Core MTD registration and access routines");
diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h
new file mode 100644
index 0000000..7b03533
--- /dev/null
+++ b/drivers/mtd/mtdcore.h
@@ -0,0 +1,23 @@
+/*
+ * These are exported solely for the purpose of mtd_blkdevs.c and mtdchar.c.
+ * You should not use them for _anything_ else.
+ */
+
+extern struct mutex mtd_table_mutex;
+
+struct mtd_info *__mtd_next_device(int i);
+int add_mtd_device(struct mtd_info *mtd);
+int del_mtd_device(struct mtd_info *mtd);
+int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+int del_mtd_partitions(struct mtd_info *);
+int parse_mtd_partitions(struct mtd_info *master, const char * const *types,
+			 struct mtd_partition **pparts,
+			 struct mtd_part_parser_data *data);
+
+int __init init_mtdchar(void);
+void __exit cleanup_mtdchar(void);
+
+#define mtd_for_each_device(mtd)			\
+	for ((mtd) = __mtd_next_device(0);		\
+	     (mtd) != NULL;				\
+	     (mtd) = __mtd_next_device(mtd->index + 1))
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 146ce11..8c4337d 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -1,35 +1,50 @@
 /*
  * Simple MTD partitioning layer
  *
- * (C) 2000 Nicolas Pitre <nico at cam.org>
+ * Copyright © 2000 Nicolas Pitre <nico at fluxnic.net>
+ * Copyright © 2002 Thomas Gleixner <gleixner at linutronix.de>
+ * Copyright © 2000-2010 David Woodhouse <dwmw2 at infradead.org>
  *
- * This code is GPL
+ * SPDX-License-Identifier:	GPL-2.0+
  *
- * 	02-21-2002	Thomas Gleixner <gleixner at autronix.de>
- *			added support for read_oob, write_oob
  */
 
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/kmod.h>
+#endif
+
 #include <common.h>
 #include <malloc.h>
 #include <asm/errno.h>
+#include <linux/compat.h>
+#include <ubi_uboot.h>
 
-#include <linux/types.h>
-#include <linux/list.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/compat.h>
+#include <linux/err.h>
+
+#include "mtdcore.h"
 
 /* Our partition linked list */
-struct list_head mtd_partitions;
+static LIST_HEAD(mtd_partitions);
+#ifndef __UBOOT__
+static DEFINE_MUTEX(mtd_partitions_mutex);
+#else
+DEFINE_MUTEX(mtd_partitions_mutex);
+#endif
 
 /* Our partition node structure */
 struct mtd_part {
 	struct mtd_info mtd;
 	struct mtd_info *master;
 	uint64_t offset;
-	int index;
 	struct list_head list;
-	int registered;
 };
 
 /*
@@ -39,6 +54,30 @@ struct mtd_part {
 #define PART(x)  ((struct mtd_part *)(x))
 
 
+#ifdef __UBOOT__
+/* from mm/util.c */
+
+/**
+ * kstrdup - allocate space for and copy an existing string
+ * @s: the string to duplicate
+ * @gfp: the GFP mask used in the kmalloc() call when allocating memory
+ */
+char *kstrdup(const char *s, gfp_t gfp)
+{
+	size_t len;
+	char *buf;
+
+	if (!s)
+		return NULL;
+
+	len = strlen(s) + 1;
+	buf = kmalloc(len, gfp);
+	if (buf)
+		memcpy(buf, s, len);
+	return buf;
+}
+#endif
+
 /*
  * MTD methods which simply translate the effective address and pass through
  * to the _real_ device.
@@ -52,7 +91,8 @@ static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int res;
 
 	stats = part->master->ecc_stats;
-	res = mtd_read(part->master, from + part->offset, len, retlen, buf);
+	res = part->master->_read(part->master, from + part->offset, len,
+				  retlen, buf);
 	if (unlikely(mtd_is_eccerr(res)))
 		mtd->ecc_stats.failed +=
 			part->master->ecc_stats.failed - stats.failed;
@@ -62,6 +102,36 @@ static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
 	return res;
 }
 
+#ifndef __UBOOT__
+static int part_point(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, void **virt, resource_size_t *phys)
+{
+	struct mtd_part *part = PART(mtd);
+
+	return part->master->_point(part->master, from + part->offset, len,
+				    retlen, virt, phys);
+}
+
+static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+{
+	struct mtd_part *part = PART(mtd);
+
+	return part->master->_unpoint(part->master, from + part->offset, len);
+}
+#endif
+
+static unsigned long part_get_unmapped_area(struct mtd_info *mtd,
+					    unsigned long len,
+					    unsigned long offset,
+					    unsigned long flags)
+{
+	struct mtd_part *part = PART(mtd);
+
+	offset += part->offset;
+	return part->master->_get_unmapped_area(part->master, len, offset,
+						flags);
+}
+
 static int part_read_oob(struct mtd_info *mtd, loff_t from,
 		struct mtd_oob_ops *ops)
 {
@@ -72,8 +142,25 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
 		return -EINVAL;
 	if (ops->datbuf && from + ops->len > mtd->size)
 		return -EINVAL;
-	res = mtd_read_oob(part->master, from + part->offset, ops);
 
+	/*
+	 * If OOB is also requested, make sure that we do not read past the end
+	 * of this partition.
+	 */
+	if (ops->oobbuf) {
+		size_t len, pages;
+
+		if (ops->mode == MTD_OPS_AUTO_OOB)
+			len = mtd->oobavail;
+		else
+			len = mtd->oobsize;
+		pages = mtd_div_by_ws(mtd->size, mtd);
+		pages -= mtd_div_by_ws(from, mtd);
+		if (ops->ooboffs + ops->ooblen > pages * len)
+			return -EINVAL;
+	}
+
+	res = part->master->_read_oob(part->master, from + part->offset, ops);
 	if (unlikely(res)) {
 		if (mtd_is_bitflip(res))
 			mtd->ecc_stats.corrected++;
@@ -87,35 +174,46 @@ static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_read_user_prot_reg(part->master, from, len, retlen, buf);
+	return part->master->_read_user_prot_reg(part->master, from, len,
+						 retlen, buf);
 }
 
 static int part_get_user_prot_info(struct mtd_info *mtd,
 		struct otp_info *buf, size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_get_user_prot_info(part->master, buf, len);
+	return part->master->_get_user_prot_info(part->master, buf, len);
 }
 
 static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_read_fact_prot_reg(part->master, from, len, retlen, buf);
+	return part->master->_read_fact_prot_reg(part->master, from, len,
+						 retlen, buf);
 }
 
 static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
 		size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_get_fact_prot_info(part->master, buf, len);
+	return part->master->_get_fact_prot_info(part->master, buf, len);
 }
 
 static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
 		size_t *retlen, const u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_write(part->master, to + part->offset, len, retlen, buf);
+	return part->master->_write(part->master, to + part->offset, len,
+				    retlen, buf);
+}
+
+static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->_panic_write(part->master, to + part->offset, len,
+					  retlen, buf);
 }
 
 static int part_write_oob(struct mtd_info *mtd, loff_t to,
@@ -127,30 +225,41 @@ static int part_write_oob(struct mtd_info *mtd, loff_t to,
 		return -EINVAL;
 	if (ops->datbuf && to + ops->len > mtd->size)
 		return -EINVAL;
-	return mtd_write_oob(part->master, to + part->offset, ops);
+	return part->master->_write_oob(part->master, to + part->offset, ops);
 }
 
 static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_write_user_prot_reg(part->master, from, len, retlen, buf);
+	return part->master->_write_user_prot_reg(part->master, from, len,
+						  retlen, buf);
 }
 
 static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_lock_user_prot_reg(part->master, from, len);
+	return part->master->_lock_user_prot_reg(part->master, from, len);
 }
 
+#ifndef __UBOOT__
+static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
+		unsigned long count, loff_t to, size_t *retlen)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->_writev(part->master, vecs, count,
+				     to + part->offset, retlen);
+}
+#endif
+
 static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	struct mtd_part *part = PART(mtd);
 	int ret;
 
 	instr->addr += part->offset;
-	ret = mtd_erase(part->master, instr);
+	ret = part->master->_erase(part->master, instr);
 	if (ret) {
 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
 			instr->fail_addr -= part->offset;
@@ -171,30 +280,51 @@ void mtd_erase_callback(struct erase_info *instr)
 	if (instr->callback)
 		instr->callback(instr);
 }
+EXPORT_SYMBOL_GPL(mtd_erase_callback);
 
 static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_lock(part->master, ofs + part->offset, len);
+	return part->master->_lock(part->master, ofs + part->offset, len);
 }
 
 static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_unlock(part->master, ofs + part->offset, len);
+	return part->master->_unlock(part->master, ofs + part->offset, len);
+}
+
+static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->_is_locked(part->master, ofs + part->offset, len);
 }
 
 static void part_sync(struct mtd_info *mtd)
 {
 	struct mtd_part *part = PART(mtd);
-	mtd_sync(part->master);
+	part->master->_sync(part->master);
+}
+
+#ifndef __UBOOT__
+static int part_suspend(struct mtd_info *mtd)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->_suspend(part->master);
+}
+
+static void part_resume(struct mtd_info *mtd)
+{
+	struct mtd_part *part = PART(mtd);
+	part->master->_resume(part->master);
 }
+#endif
 
 static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct mtd_part *part = PART(mtd);
 	ofs += part->offset;
-	return mtd_block_isbad(part->master, ofs);
+	return part->master->_block_isbad(part->master, ofs);
 }
 
 static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
@@ -203,12 +333,18 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	int res;
 
 	ofs += part->offset;
-	res = mtd_block_markbad(part->master, ofs);
+	res = part->master->_block_markbad(part->master, ofs);
 	if (!res)
 		mtd->ecc_stats.badblocks++;
 	return res;
 }
 
+static inline void free_partition(struct mtd_part *p)
+{
+	kfree(p->mtd.name);
+	kfree(p);
+}
+
 /*
  * This function unregisters and destroy all slave MTD objects which are
  * attached to the given master MTD object.
@@ -217,49 +353,78 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
 int del_mtd_partitions(struct mtd_info *master)
 {
 	struct mtd_part *slave, *next;
+	int ret, err = 0;
 
+	mutex_lock(&mtd_partitions_mutex);
 	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
 		if (slave->master == master) {
+			ret = del_mtd_device(&slave->mtd);
+			if (ret < 0) {
+				err = ret;
+				continue;
+			}
 			list_del(&slave->list);
-			if (slave->registered)
-				del_mtd_device(&slave->mtd);
-			kfree(slave);
+			free_partition(slave);
 		}
+	mutex_unlock(&mtd_partitions_mutex);
 
-	return 0;
+	return err;
 }
 
-static struct mtd_part *add_one_partition(struct mtd_info *master,
-		const struct mtd_partition *part, int partno,
-		uint64_t cur_offset)
+static struct mtd_part *allocate_partition(struct mtd_info *master,
+			const struct mtd_partition *part, int partno,
+			uint64_t cur_offset)
 {
 	struct mtd_part *slave;
+	char *name;
 
 	/* allocate the partition structure */
 	slave = kzalloc(sizeof(*slave), GFP_KERNEL);
-	if (!slave) {
+	name = kstrdup(part->name, GFP_KERNEL);
+	if (!name || !slave) {
 		printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
-			master->name);
-		del_mtd_partitions(master);
-		return NULL;
+		       master->name);
+		kfree(name);
+		kfree(slave);
+		return ERR_PTR(-ENOMEM);
 	}
-	list_add(&slave->list, &mtd_partitions);
 
 	/* set up the MTD object for this partition */
 	slave->mtd.type = master->type;
 	slave->mtd.flags = master->flags & ~part->mask_flags;
 	slave->mtd.size = part->size;
 	slave->mtd.writesize = master->writesize;
+	slave->mtd.writebufsize = master->writebufsize;
 	slave->mtd.oobsize = master->oobsize;
 	slave->mtd.oobavail = master->oobavail;
 	slave->mtd.subpage_sft = master->subpage_sft;
 
-	slave->mtd.name = part->name;
+	slave->mtd.name = name;
 	slave->mtd.owner = master->owner;
+#ifndef __UBOOT__
+	slave->mtd.backing_dev_info = master->backing_dev_info;
+
+	/* NOTE:  we don't arrange MTDs as a tree; it'd be error-prone
+	 * to have the same data be in two different partitions.
+	 */
+	slave->mtd.dev.parent = master->dev.parent;
+#endif
 
 	slave->mtd._read = part_read;
 	slave->mtd._write = part_write;
 
+	if (master->_panic_write)
+		slave->mtd._panic_write = part_panic_write;
+
+#ifndef __UBOOT__
+	if (master->_point && master->_unpoint) {
+		slave->mtd._point = part_point;
+		slave->mtd._unpoint = part_unpoint;
+	}
+#endif
+
+	if (master->_get_unmapped_area)
+		slave->mtd._get_unmapped_area = part_get_unmapped_area;
 	if (master->_read_oob)
 		slave->mtd._read_oob = part_read_oob;
 	if (master->_write_oob)
@@ -278,10 +443,21 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 		slave->mtd._get_fact_prot_info = part_get_fact_prot_info;
 	if (master->_sync)
 		slave->mtd._sync = part_sync;
+#ifndef __UBOOT__
+	if (!partno && !master->dev.class && master->_suspend &&
+	    master->_resume) {
+			slave->mtd._suspend = part_suspend;
+			slave->mtd._resume = part_resume;
+	}
+	if (master->_writev)
+		slave->mtd._writev = part_writev;
+#endif
 	if (master->_lock)
 		slave->mtd._lock = part_lock;
 	if (master->_unlock)
 		slave->mtd._unlock = part_unlock;
+	if (master->_is_locked)
+		slave->mtd._is_locked = part_is_locked;
 	if (master->_block_isbad)
 		slave->mtd._block_isbad = part_block_isbad;
 	if (master->_block_markbad)
@@ -289,7 +465,6 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	slave->mtd._erase = part_erase;
 	slave->master = master;
 	slave->offset = part->offset;
-	slave->index = partno;
 
 	if (slave->offset == MTDPART_OFS_APPEND)
 		slave->offset = cur_offset;
@@ -298,18 +473,29 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 		if (mtd_mod_by_eb(cur_offset, master) != 0) {
 			/* Round up to next erasesize */
 			slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize;
-			debug("Moving partition %d: 0x%012llx -> 0x%012llx\n",
-			      partno, (unsigned long long)cur_offset,
-			      (unsigned long long)slave->offset);
+			debug("Moving partition %d: "
+			       "0x%012llx -> 0x%012llx\n", partno,
+			       (unsigned long long)cur_offset, (unsigned long long)slave->offset);
+		}
+	}
+	if (slave->offset == MTDPART_OFS_RETAIN) {
+		slave->offset = cur_offset;
+		if (master->size - slave->offset >= slave->mtd.size) {
+			slave->mtd.size = master->size - slave->offset
+							- slave->mtd.size;
+		} else {
+			debug("mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n",
+				part->name, master->size - slave->offset,
+				slave->mtd.size);
+			/* register to preserve ordering */
+			goto out_register;
 		}
 	}
 	if (slave->mtd.size == MTDPART_SIZ_FULL)
 		slave->mtd.size = master->size - slave->offset;
 
-	debug("0x%012llx-0x%012llx : \"%s\"\n",
-	      (unsigned long long)slave->offset,
-	      (unsigned long long)(slave->offset + slave->mtd.size),
-	      slave->mtd.name);
+	debug("0x%012llx-0x%012llx : \"%s\"\n", (unsigned long long)slave->offset,
+		(unsigned long long)(slave->offset + slave->mtd.size), slave->mtd.name);
 
 	/* let's do some sanity checks */
 	if (slave->offset >= master->size) {
@@ -336,7 +522,8 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 		for (i = 0; i < max && regions[i].offset <= slave->offset; i++)
 			;
 		/* The loop searched for the region _behind_ the first one */
-		i--;
+		if (i > 0)
+			i--;
 
 		/* Pick biggest erasesize */
 		for (; i < max && regions[i].offset < end; i++) {
@@ -367,6 +554,10 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	}
 
 	slave->mtd.ecclayout = master->ecclayout;
+	slave->mtd.ecc_step_size = master->ecc_step_size;
+	slave->mtd.ecc_strength = master->ecc_strength;
+	slave->mtd.bitflip_threshold = master->bitflip_threshold;
+
 	if (master->_block_isbad) {
 		uint64_t offs = 0;
 
@@ -378,18 +569,89 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	}
 
 out_register:
-	if (part->mtdp) {
-		/* store the object pointer (caller may or may not register it*/
-		*part->mtdp = &slave->mtd;
-		slave->registered = 0;
-	} else {
-		/* register our partition */
-		add_mtd_device(&slave->mtd);
-		slave->registered = 1;
-	}
 	return slave;
 }
 
+int mtd_add_partition(struct mtd_info *master, const char *name,
+		      long long offset, long long length)
+{
+	struct mtd_partition part;
+	struct mtd_part *p, *new;
+	uint64_t start, end;
+	int ret = 0;
+
+	/* the direct offset is expected */
+	if (offset == MTDPART_OFS_APPEND ||
+	    offset == MTDPART_OFS_NXTBLK)
+		return -EINVAL;
+
+	if (length == MTDPART_SIZ_FULL)
+		length = master->size - offset;
+
+	if (length <= 0)
+		return -EINVAL;
+
+	part.name = name;
+	part.size = length;
+	part.offset = offset;
+	part.mask_flags = 0;
+	part.ecclayout = NULL;
+
+	new = allocate_partition(master, &part, -1, offset);
+	if (IS_ERR(new))
+		return PTR_ERR(new);
+
+	start = offset;
+	end = offset + length;
+
+	mutex_lock(&mtd_partitions_mutex);
+	list_for_each_entry(p, &mtd_partitions, list)
+		if (p->master == master) {
+			if ((start >= p->offset) &&
+			    (start < (p->offset + p->mtd.size)))
+				goto err_inv;
+
+			if ((end >= p->offset) &&
+			    (end < (p->offset + p->mtd.size)))
+				goto err_inv;
+		}
+
+	list_add(&new->list, &mtd_partitions);
+	mutex_unlock(&mtd_partitions_mutex);
+
+	add_mtd_device(&new->mtd);
+
+	return ret;
+err_inv:
+	mutex_unlock(&mtd_partitions_mutex);
+	free_partition(new);
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(mtd_add_partition);
+
+int mtd_del_partition(struct mtd_info *master, int partno)
+{
+	struct mtd_part *slave, *next;
+	int ret = -EINVAL;
+
+	mutex_lock(&mtd_partitions_mutex);
+	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
+		if ((slave->master == master) &&
+		    (slave->mtd.index == partno)) {
+			ret = del_mtd_device(&slave->mtd);
+			if (ret < 0)
+				break;
+
+			list_del(&slave->list);
+			free_partition(slave);
+			break;
+		}
+	mutex_unlock(&mtd_partitions_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mtd_del_partition);
+
 /*
  * This function, given a master MTD object and a partition table, creates
  * and registers slave MTD objects which are bound to the master according to
@@ -407,22 +669,145 @@ int add_mtd_partitions(struct mtd_info *master,
 	uint64_t cur_offset = 0;
 	int i;
 
-	/*
-	 * Need to init the list here, since LIST_INIT() does not
-	 * work on platforms where relocation has problems (like MIPS
-	 * & PPC).
-	 */
-	if (mtd_partitions.next == NULL)
-		INIT_LIST_HEAD(&mtd_partitions);
-
 	debug("Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
 
 	for (i = 0; i < nbparts; i++) {
-		slave = add_one_partition(master, parts + i, i, cur_offset);
-		if (!slave)
-			return -ENOMEM;
+		slave = allocate_partition(master, parts + i, i, cur_offset);
+		if (IS_ERR(slave))
+			return PTR_ERR(slave);
+
+		mutex_lock(&mtd_partitions_mutex);
+		list_add(&slave->list, &mtd_partitions);
+		mutex_unlock(&mtd_partitions_mutex);
+
+		add_mtd_device(&slave->mtd);
+
 		cur_offset = slave->offset + slave->mtd.size;
 	}
 
 	return 0;
 }
+
+#ifndef __UBOOT__
+static DEFINE_SPINLOCK(part_parser_lock);
+static LIST_HEAD(part_parsers);
+
+static struct mtd_part_parser *get_partition_parser(const char *name)
+{
+	struct mtd_part_parser *p, *ret = NULL;
+
+	spin_lock(&part_parser_lock);
+
+	list_for_each_entry(p, &part_parsers, list)
+		if (!strcmp(p->name, name) && try_module_get(p->owner)) {
+			ret = p;
+			break;
+		}
+
+	spin_unlock(&part_parser_lock);
+
+	return ret;
+}
+
+#define put_partition_parser(p) do { module_put((p)->owner); } while (0)
+
+void register_mtd_parser(struct mtd_part_parser *p)
+{
+	spin_lock(&part_parser_lock);
+	list_add(&p->list, &part_parsers);
+	spin_unlock(&part_parser_lock);
+}
+EXPORT_SYMBOL_GPL(register_mtd_parser);
+
+void deregister_mtd_parser(struct mtd_part_parser *p)
+{
+	spin_lock(&part_parser_lock);
+	list_del(&p->list);
+	spin_unlock(&part_parser_lock);
+}
+EXPORT_SYMBOL_GPL(deregister_mtd_parser);
+
+/*
+ * Do not forget to update 'parse_mtd_partitions()' kerneldoc comment if you
+ * are changing this array!
+ */
+static const char * const default_mtd_part_types[] = {
+	"cmdlinepart",
+	"ofpart",
+	NULL
+};
+
+/**
+ * parse_mtd_partitions - parse MTD partitions
+ * @master: the master partition (describes whole MTD device)
+ * @types: names of partition parsers to try or %NULL
+ * @pparts: array of partitions found is returned here
+ * @data: MTD partition parser-specific data
+ *
+ * This function tries to find partition on MTD device @master. It uses MTD
+ * partition parsers, specified in @types. However, if @types is %NULL, then
+ * the default list of parsers is used. The default list contains only the
+ * "cmdlinepart" and "ofpart" parsers ATM.
+ * Note: If there are more then one parser in @types, the kernel only takes the
+ * partitions parsed out by the first parser.
+ *
+ * This function may return:
+ * o a negative error code in case of failure
+ * o zero if no partitions were found
+ * o a positive number of found partitions, in which case on exit @pparts will
+ *   point to an array containing this number of &struct mtd_info objects.
+ */
+int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
+			 struct mtd_partition **pparts,
+			 struct mtd_part_parser_data *data)
+{
+	struct mtd_part_parser *parser;
+	int ret = 0;
+
+	if (!types)
+		types = default_mtd_part_types;
+
+	for ( ; ret <= 0 && *types; types++) {
+		parser = get_partition_parser(*types);
+		if (!parser && !request_module("%s", *types))
+			parser = get_partition_parser(*types);
+		if (!parser)
+			continue;
+		ret = (*parser->parse_fn)(master, pparts, data);
+		put_partition_parser(parser);
+		if (ret > 0) {
+			printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n",
+			       ret, parser->name, master->name);
+			break;
+		}
+	}
+	return ret;
+}
+#endif
+
+int mtd_is_partition(const struct mtd_info *mtd)
+{
+	struct mtd_part *part;
+	int ispart = 0;
+
+	mutex_lock(&mtd_partitions_mutex);
+	list_for_each_entry(part, &mtd_partitions, list)
+		if (&part->mtd == mtd) {
+			ispart = 1;
+			break;
+		}
+	mutex_unlock(&mtd_partitions_mutex);
+
+	return ispart;
+}
+EXPORT_SYMBOL_GPL(mtd_is_partition);
+
+/* Returns the size of the entire flash chip */
+uint64_t mtd_get_device_size(const struct mtd_info *mtd)
+{
+	if (!mtd_is_partition(mtd))
+		return mtd->size;
+
+	return PART(mtd)->master->size;
+}
+EXPORT_SYMBOL_GPL(mtd_get_device_size);
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 2f31fc9..7e1e6ec 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -561,6 +561,7 @@ static void fsl_elbc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 		       len, avail);
 }
 
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 /*
  * Verify buffer against the FCM Controller Data Buffer
  */
@@ -593,6 +594,7 @@ static int fsl_elbc_verify_buf(struct mtd_info *mtd,
 	ctrl->index += len;
 	return i == len && ctrl->status == LTESR_CC ? 0 : -EIO;
 }
+#endif
 
 /* This function is called after Program and Erase Operations to
  * check for success or failure.
@@ -725,7 +727,9 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
 	nand->read_byte = fsl_elbc_read_byte;
 	nand->write_buf = fsl_elbc_write_buf;
 	nand->read_buf = fsl_elbc_read_buf;
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 	nand->verify_buf = fsl_elbc_verify_buf;
+#endif
 	nand->select_chip = fsl_elbc_select_chip;
 	nand->cmdfunc = fsl_elbc_cmdfunc;
 	nand->waitfunc = fsl_elbc_wait;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index be5a16a..a8d0b20 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -681,6 +681,7 @@ static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 		       __func__, len, avail);
 }
 
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 /*
  * Verify buffer against the IFC Controller Data Buffer
  */
@@ -713,6 +714,7 @@ static int fsl_ifc_verify_buf(struct mtd_info *mtd,
 	ctrl->index += len;
 	return i == len && ctrl->status == IFC_NAND_EVTER_STAT_OPC ? 0 : -EIO;
 }
+#endif
 
 /* This function is called after Program and Erase Operations to
  * check for success or failure.
@@ -911,7 +913,9 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr)
 
 	nand->write_buf = fsl_ifc_write_buf;
 	nand->read_buf = fsl_ifc_read_buf;
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 	nand->verify_buf = fsl_ifc_verify_buf;
+#endif
 	nand->select_chip = fsl_ifc_select_chip;
 	nand->cmdfunc = fsl_ifc_cmdfunc;
 	nand->waitfunc = fsl_ifc_wait;
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 3ae0044..65ce98a 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -153,6 +153,7 @@ static void upm_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 		buf[i] = in_8(chip->IO_ADDR_R);
 }
 
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 static int upm_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
 {
 	int i;
@@ -165,6 +166,7 @@ static int upm_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
 
 	return 0;
 }
+#endif
 
 static int nand_dev_ready(struct mtd_info *mtd)
 {
@@ -191,7 +193,9 @@ int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
 	chip->read_byte = upm_nand_read_byte;
 	chip->read_buf = upm_nand_read_buf;
 	chip->write_buf = upm_nand_write_buf;
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 	chip->verify_buf = upm_nand_verify_buf;
+#endif
 	if (fun->dev_ready)
 		chip->dev_ready = nand_dev_ready;
 
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index d0f3a35..7233bfc 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -459,6 +459,7 @@ static void mpc5121_nfc_write_buf(struct mtd_info *mtd,
 	mpc5121_nfc_buf_copy(mtd, (u_char *) buf, len, 1);
 }
 
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 /* Compare buffer with NAND flash */
 static int mpc5121_nfc_verify_buf(struct mtd_info *mtd,
 				  const u_char * buf, int len)
@@ -479,6 +480,7 @@ static int mpc5121_nfc_verify_buf(struct mtd_info *mtd,
 
 	return 0;
 }
+#endif
 
 /* Read byte from NFC buffers */
 static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd)
@@ -607,7 +609,9 @@ int board_nand_init(struct nand_chip *chip)
 	chip->read_word = mpc5121_nfc_read_word;
 	chip->read_buf = mpc5121_nfc_read_buf;
 	chip->write_buf = mpc5121_nfc_write_buf;
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 	chip->verify_buf = mpc5121_nfc_verify_buf;
+#endif
 	chip->select_chip = mpc5121_nfc_select_chip;
 	chip->bbt_options = NAND_BBT_USE_FLASH;
 	chip->ecc.mode = NAND_ECC_SOFT;
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index ed0ca3a..2e5b5b9 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -949,6 +949,8 @@ static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	host->col_addr = col;
 }
 
+#ifdef __UBOOT__
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 /*
  * Used by the upper layer to verify the data in NAND Flash
  * with the data in the buf.
@@ -972,6 +974,8 @@ static int mxc_nand_verify_buf(struct mtd_info *mtd,
 
 	return 0;
 }
+#endif
+#endif
 
 /*
  * This function is used by upper layer for select and
@@ -1203,7 +1207,11 @@ int board_nand_init(struct nand_chip *this)
 	this->read_word = mxc_nand_read_word;
 	this->write_buf = mxc_nand_write_buf;
 	this->read_buf = mxc_nand_read_buf;
+#ifdef __UBOOT__
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 	this->verify_buf = mxc_nand_verify_buf;
+#endif
+#endif
 
 	host->regs = (struct mxc_nand_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
 #ifdef MXC_NFC_V3_2
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 1ce55fd..4c4e0af 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -4,7 +4,6 @@
  *  Overview:
  *   This is the generic MTD driver for NAND flash devices. It should be
  *   capable of working with almost all NAND chips currently available.
- *   Basic support for AG-AND chips is provided.
  *
  *	Additional technical information is available on
  *	http://www.linux-mtd.infradead.org/doc/nand.html
@@ -22,8 +21,6 @@
  *	Enable cached programming for 2k page size chips
  *	Check, if mtd->ecctype should be set to MTD_ECC_HW
  *	if we have HW ECC support.
- *	The AG-AND chips have nice features for speed improvement,
- *	which are not supported yet. Read / program 4 pages in one go.
  *	BBT table is not serialized, has to be fixed
  *
  * This program is free software; you can redistribute it and/or modify
@@ -32,10 +29,29 @@
  *
  */
 
-#include <common.h>
-
-#define ENOTSUPP	524	/* Operation is not supported */
+#define __UBOOT__
+#ifndef __UBOOT__
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/nand_bch.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/leds.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#else
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <common.h>
 #include <malloc.h>
 #include <watchdog.h>
 #include <linux/err.h>
@@ -44,11 +60,9 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/nand_bch.h>
-
 #ifdef CONFIG_MTD_PARTITIONS
 #include <linux/mtd/partitions.h>
 #endif
-
 #include <asm/io.h>
 #include <asm/errno.h>
 
@@ -63,6 +77,9 @@
 #define CONFIG_SYS_NAND_RESET_CNT 200000
 #endif
 
+static bool is_module_text_address(unsigned long addr) {return 0;}
+#endif
+
 /* Define default oob placement schemes for large and small page devices */
 static struct nand_ecclayout nand_oob_8 = {
 	.eccbytes = 3,
@@ -107,13 +124,16 @@ static struct nand_ecclayout nand_oob_128 = {
 		 .length = 78} }
 };
 
-static int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd,
-			   int new_state);
+static int nand_get_device(struct mtd_info *mtd, int new_state);
 
 static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops);
 
-static int nand_wait(struct mtd_info *mtd, struct nand_chip *this);
+/*
+ * For devices which display every fart in the system on a separate LED. Is
+ * compiled away when LED support is disabled.
+ */
+DEFINE_LED_TRIGGER(nand_led_trigger);
 
 static int check_offs_len(struct mtd_info *mtd,
 					loff_t ofs, uint64_t len)
@@ -122,15 +142,14 @@ static int check_offs_len(struct mtd_info *mtd,
 	int ret = 0;
 
 	/* Start address must align on block boundary */
-	if (ofs & ((1 << chip->phys_erase_shift) - 1)) {
-		MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
+	if (ofs & ((1ULL << chip->phys_erase_shift) - 1)) {
+		pr_debug("%s: unaligned address\n", __func__);
 		ret = -EINVAL;
 	}
 
 	/* Length must align on block boundary */
-	if (len & ((1 << chip->phys_erase_shift) - 1)) {
-		MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
-					__func__);
+	if (len & ((1ULL << chip->phys_erase_shift) - 1)) {
+		pr_debug("%s: length not block aligned\n", __func__);
 		ret = -EINVAL;
 	}
 
@@ -141,30 +160,43 @@ static int check_offs_len(struct mtd_info *mtd,
  * nand_release_device - [GENERIC] release chip
  * @mtd: MTD device structure
  *
- * Deselect, release chip lock and wake up anyone waiting on the device.
+ * Release chip lock and wake up anyone waiting on the device.
  */
 static void nand_release_device(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 
+#ifndef __UBOOT__
+	/* Release the controller and the chip */
+	spin_lock(&chip->controller->lock);
+	chip->controller->active = NULL;
+	chip->state = FL_READY;
+	wake_up(&chip->controller->wq);
+	spin_unlock(&chip->controller->lock);
+#else
 	/* De-select the NAND device */
 	chip->select_chip(mtd, -1);
+#endif
 }
 
 /**
  * nand_read_byte - [DEFAULT] read one byte from the chip
  * @mtd: MTD device structure
  *
- * Default read function for 8bit buswidth.
+ * Default read function for 8bit buswidth
  */
+#ifndef __UBOOT__
+static uint8_t nand_read_byte(struct mtd_info *mtd)
+#else
 uint8_t nand_read_byte(struct mtd_info *mtd)
+#endif
 {
 	struct nand_chip *chip = mtd->priv;
 	return readb(chip->IO_ADDR_R);
 }
 
 /**
- * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
  * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
  * @mtd: MTD device structure
  *
@@ -213,6 +245,88 @@ static void nand_select_chip(struct mtd_info *mtd, int chipnr)
 }
 
 /**
+ * nand_write_byte - [DEFAULT] write single byte to chip
+ * @mtd: MTD device structure
+ * @byte: value to write
+ *
+ * Default function to write a byte to I/O[7:0]
+ */
+static void nand_write_byte(struct mtd_info *mtd, uint8_t byte)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	chip->write_buf(mtd, &byte, 1);
+}
+
+/**
+ * nand_write_byte16 - [DEFAULT] write single byte to a chip with width 16
+ * @mtd: MTD device structure
+ * @byte: value to write
+ *
+ * Default function to write a byte to I/O[7:0] on a 16-bit wide chip.
+ */
+static void nand_write_byte16(struct mtd_info *mtd, uint8_t byte)
+{
+	struct nand_chip *chip = mtd->priv;
+	uint16_t word = byte;
+
+	/*
+	 * It's not entirely clear what should happen to I/O[15:8] when writing
+	 * a byte. The ONFi spec (Revision 3.1; 2012-09-19, Section 2.16) reads:
+	 *
+	 *    When the host supports a 16-bit bus width, only data is
+	 *    transferred at the 16-bit width. All address and command line
+	 *    transfers shall use only the lower 8-bits of the data bus. During
+	 *    command transfers, the host may place any value on the upper
+	 *    8-bits of the data bus. During address transfers, the host shall
+	 *    set the upper 8-bits of the data bus to 00h.
+	 *
+	 * One user of the write_byte callback is nand_onfi_set_features. The
+	 * four parameters are specified to be written to I/O[7:0], but this is
+	 * neither an address nor a command transfer. Let's assume a 0 on the
+	 * upper I/O lines is OK.
+	 */
+	chip->write_buf(mtd, (uint8_t *)&word, 2);
+}
+
+#ifdef __UBOOT__
+static void iowrite8_rep(void *addr, const uint8_t *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		writeb(buf[i], addr);
+}
+static void ioread8_rep(void *addr, uint8_t *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		buf[i] = readb(addr);
+}
+
+static void ioread16_rep(void *addr, void *buf, int len)
+{
+	int i;
+ 	u16 *p = (u16 *) buf;
+	len >>= 1;
+ 
+	for (i = 0; i < len; i++)
+		p[i] = readw(addr);
+}
+
+static void iowrite16_rep(void *addr, void *buf, int len)
+{
+	int i;
+        u16 *p = (u16 *) buf;
+        len >>= 1;
+
+        for (i = 0; i < len; i++)
+                writew(p[i], addr);
+}
+#endif
+
+/**
  * nand_write_buf - [DEFAULT] write buffer to chip
  * @mtd: MTD device structure
  * @buf: data buffer
@@ -220,13 +334,15 @@ static void nand_select_chip(struct mtd_info *mtd, int chipnr)
  *
  * Default write function for 8bit buswidth.
  */
+#ifndef __UBOOT__
+static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+#else
 void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+#endif
 {
-	int i;
 	struct nand_chip *chip = mtd->priv;
 
-	for (i = 0; i < len; i++)
-		writeb(buf[i], chip->IO_ADDR_W);
+	iowrite8_rep(chip->IO_ADDR_W, buf, len);
 }
 
 /**
@@ -237,15 +353,19 @@ void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
  *
  * Default read function for 8bit buswidth.
  */
+#ifndef __UBOOT__
+static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+#else
 void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+#endif
 {
-	int i;
 	struct nand_chip *chip = mtd->priv;
 
-	for (i = 0; i < len; i++)
-		buf[i] = readb(chip->IO_ADDR_R);
+	ioread8_rep(chip->IO_ADDR_R, buf, len);
 }
 
+#ifdef __UBOOT__
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 /**
  * nand_verify_buf - [DEFAULT] Verify chip data against buffer
  * @mtd: MTD device structure
@@ -266,14 +386,14 @@ static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 }
 
 /**
- * nand_write_buf16 - [DEFAULT] write buffer to chip
+ * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
  * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
  *
- * Default write function for 16bit buswidth.
+ * Default verify function for 16bit buswidth.
  */
-void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
 {
 	int i;
 	struct nand_chip *chip = mtd->priv;
@@ -281,49 +401,52 @@ void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
 	len >>= 1;
 
 	for (i = 0; i < len; i++)
-		writew(p[i], chip->IO_ADDR_W);
+		if (p[i] != readw(chip->IO_ADDR_R))
+			return -EFAULT;
 
+	return 0;
 }
+#endif
+#endif
 
 /**
- * nand_read_buf16 - [DEFAULT] read chip data into buffer
+ * nand_write_buf16 - [DEFAULT] write buffer to chip
  * @mtd: MTD device structure
- * @buf: buffer to store date
- * @len: number of bytes to read
+ * @buf: data buffer
+ * @len: number of bytes to write
  *
- * Default read function for 16bit buswidth.
+ * Default write function for 16bit buswidth.
  */
-void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
+#ifndef __UBOOT__
+static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+#else
+void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+#endif
 {
-	int i;
 	struct nand_chip *chip = mtd->priv;
 	u16 *p = (u16 *) buf;
-	len >>= 1;
 
-	for (i = 0; i < len; i++)
-		p[i] = readw(chip->IO_ADDR_R);
+	iowrite16_rep(chip->IO_ADDR_W, p, len >> 1);
 }
 
 /**
- * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
+ * nand_read_buf16 - [DEFAULT] read chip data into buffer
  * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
+ * @buf: buffer to store date
+ * @len: number of bytes to read
  *
- * Default verify function for 16bit buswidth.
+ * Default read function for 16bit buswidth.
  */
-static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+#ifndef __UBOOT__
+static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
+#else
+void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
+#endif
 {
-	int i;
 	struct nand_chip *chip = mtd->priv;
 	u16 *p = (u16 *) buf;
-	len >>= 1;
-
-	for (i = 0; i < len; i++)
-		if (p[i] != readw(chip->IO_ADDR_R))
-			return -EFAULT;
 
-	return 0;
+	ioread16_rep(chip->IO_ADDR_R, p, len >> 1);
 }
 
 /**
@@ -348,7 +471,7 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 	if (getchip) {
 		chipnr = (int)(ofs >> chip->chip_shift);
 
-		nand_get_device(chip, mtd, FL_READING);
+		nand_get_device(mtd, FL_READING);
 
 		/* Select the NAND device */
 		chip->select_chip(mtd, chipnr);
@@ -378,87 +501,97 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 		i++;
 	} while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE));
 
-	if (getchip)
+	if (getchip) {
+		chip->select_chip(mtd, -1);
 		nand_release_device(mtd);
+	}
 
 	return res;
 }
 
 /**
- * nand_default_block_markbad - [DEFAULT] mark a block bad
+ * nand_default_block_markbad - [DEFAULT] mark a block bad via bad block marker
  * @mtd: MTD device structure
  * @ofs: offset from device start
  *
  * This is the default implementation, which can be overridden by a hardware
- * specific driver. We try operations in the following order, according to our
- * bbt_options (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH):
+ * specific driver. It provides the details for writing a bad block marker to a
+ * block.
+ */
+static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct mtd_oob_ops ops;
+	uint8_t buf[2] = { 0, 0 };
+	int ret = 0, res, i = 0;
+
+	ops.datbuf = NULL;
+	ops.oobbuf = buf;
+	ops.ooboffs = chip->badblockpos;
+	if (chip->options & NAND_BUSWIDTH_16) {
+		ops.ooboffs &= ~0x01;
+		ops.len = ops.ooblen = 2;
+	} else {
+		ops.len = ops.ooblen = 1;
+	}
+	ops.mode = MTD_OPS_PLACE_OOB;
+
+	/* Write to first/last page(s) if necessary */
+	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+		ofs += mtd->erasesize - mtd->writesize;
+	do {
+		res = nand_do_write_oob(mtd, ofs, &ops);
+		if (!ret)
+			ret = res;
+
+		i++;
+		ofs += mtd->writesize;
+	} while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
+
+	return ret;
+}
+
+/**
+ * nand_block_markbad_lowlevel - mark a block bad
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ *
+ * This function performs the generic NAND bad block marking steps (i.e., bad
+ * block table(s) and/or marker(s)). We only allow the hardware driver to
+ * specify how to write bad block markers to OOB (chip->block_markbad).
+ *
+ * We try operations in the following order:
  *  (1) erase the affected block, to allow OOB marker to be written cleanly
- *  (2) update in-memory BBT
- *  (3) write bad block marker to OOB area of affected block
- *  (4) update flash-based BBT
- * Note that we retain the first error encountered in (3) or (4), finish the
+ *  (2) write bad block marker to OOB area of affected block (unless flag
+ *      NAND_BBT_NO_OOB_BBM is present)
+ *  (3) update the BBT
+ * Note that we retain the first error encountered in (2) or (3), finish the
  * procedures, and dump the error in the end.
 */
-static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs)
 {
 	struct nand_chip *chip = mtd->priv;
-	uint8_t buf[2] = { 0, 0 };
-	int block, res, ret = 0, i = 0;
-	int write_oob = !(chip->bbt_options & NAND_BBT_NO_OOB_BBM);
+	int res, ret = 0;
 
-	if (write_oob) {
+	if (!(chip->bbt_options & NAND_BBT_NO_OOB_BBM)) {
 		struct erase_info einfo;
 
 		/* Attempt erase before marking OOB */
 		memset(&einfo, 0, sizeof(einfo));
 		einfo.mtd = mtd;
 		einfo.addr = ofs;
-		einfo.len = 1 << chip->phys_erase_shift;
+		einfo.len = 1ULL << chip->phys_erase_shift;
 		nand_erase_nand(mtd, &einfo, 0);
-	}
-
-	/* Get block number */
-	block = (int)(ofs >> chip->bbt_erase_shift);
-	/* Mark block bad in memory-based BBT */
-	if (chip->bbt)
-		chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
-
-	/* Write bad block marker to OOB */
-	if (write_oob) {
-		struct mtd_oob_ops ops;
-		loff_t wr_ofs = ofs;
-
-		nand_get_device(chip, mtd, FL_WRITING);
-
-		ops.datbuf = NULL;
-		ops.oobbuf = buf;
-		ops.ooboffs = chip->badblockpos;
-		if (chip->options & NAND_BUSWIDTH_16) {
-			ops.ooboffs &= ~0x01;
-			ops.len = ops.ooblen = 2;
-		} else {
-			ops.len = ops.ooblen = 1;
-		}
-		ops.mode = MTD_OPS_PLACE_OOB;
-
-		/* Write to first/last page(s) if necessary */
-		if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
-			wr_ofs += mtd->erasesize - mtd->writesize;
-		do {
-			res = nand_do_write_oob(mtd, wr_ofs, &ops);
-			if (!ret)
-				ret = res;
-
-			i++;
-			wr_ofs += mtd->writesize;
-		} while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
 
+		/* Write bad block marker to OOB */
+		nand_get_device(mtd, FL_WRITING);
+		ret = chip->block_markbad(mtd, ofs);
 		nand_release_device(mtd);
 	}
 
-	/* Update flash-based bad block table */
-	if (chip->bbt_options & NAND_BBT_USE_FLASH) {
-		res = nand_update_bbt(mtd, ofs);
+	/* Mark block bad in BBT */
+	if (chip->bbt) {
+		res = nand_markbad_bbt(mtd, ofs);
 		if (!ret)
 			ret = res;
 	}
@@ -504,11 +637,6 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
 {
 	struct nand_chip *chip = mtd->priv;
 
-	if (!(chip->options & NAND_BBT_SCANNED)) {
-		chip->options |= NAND_BBT_SCANNED;
-		chip->scan_bbt(mtd);
-	}
-
 	if (!chip->bbt)
 		return chip->block_bad(mtd, ofs, getchip);
 
@@ -516,22 +644,63 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
 	return nand_isbad_bbt(mtd, ofs, allowbbt);
 }
 
+#ifndef __UBOOT__
+/**
+ * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
+ * @mtd: MTD device structure
+ * @timeo: Timeout
+ *
+ * Helper function for nand_wait_ready used when needing to wait in interrupt
+ * context.
+ */
+static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
+{
+	struct nand_chip *chip = mtd->priv;
+	int i;
+
+	/* Wait for the device to get ready */
+	for (i = 0; i < timeo; i++) {
+		if (chip->dev_ready(mtd))
+			break;
+		touch_softlockup_watchdog();
+		mdelay(1);
+	}
+}
+#endif
+
 /* Wait for the ready pin, after a command. The timeout is caught later. */
 void nand_wait_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
+#ifndef __UBOOT__
+	unsigned long timeo = jiffies + msecs_to_jiffies(20);
+
+	/* 400ms timeout */
+	if (in_interrupt() || oops_in_progress)
+		return panic_nand_wait_ready(mtd, 400);
+
+	led_trigger_event(nand_led_trigger, LED_FULL);
+	/* Wait until command is processed or timeout occurs */
+	do {
+		if (chip->dev_ready(mtd))
+			break;
+		touch_softlockup_watchdog();
+	} while (time_before(jiffies, timeo));
+	led_trigger_event(nand_led_trigger, LED_OFF);
+#else
 	u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
 	u32 time_start;
 
 	time_start = get_timer(0);
-
 	/* Wait until command is processed or timeout occurs */
 	while (get_timer(time_start) < timeo) {
 		if (chip->dev_ready)
 			if (chip->dev_ready(mtd))
 				break;
 	}
+#endif
 }
+EXPORT_SYMBOL_GPL(nand_wait_ready);
 
 /**
  * nand_command - [DEFAULT] Send command to NAND device
@@ -541,7 +710,7 @@ void nand_wait_ready(struct mtd_info *mtd)
  * @page_addr: the page address for this command, -1 if none
  *
  * Send command to NAND device. This function is used for small page devices
- * (256/512 Bytes per page).
+ * (512 Bytes per page).
  */
 static void nand_command(struct mtd_info *mtd, unsigned int command,
 			 int column, int page_addr)
@@ -659,8 +828,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	}
 
 	/* Command latch cycle */
-	chip->cmd_ctrl(mtd, command & 0xff,
-		       NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+	chip->cmd_ctrl(mtd, command, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
 
 	if (column != -1 || page_addr != -1) {
 		int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE;
@@ -699,16 +867,6 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	case NAND_CMD_SEQIN:
 	case NAND_CMD_RNDIN:
 	case NAND_CMD_STATUS:
-	case NAND_CMD_DEPLETE1:
-		return;
-
-	case NAND_CMD_STATUS_ERROR:
-	case NAND_CMD_STATUS_ERROR0:
-	case NAND_CMD_STATUS_ERROR1:
-	case NAND_CMD_STATUS_ERROR2:
-	case NAND_CMD_STATUS_ERROR3:
-		/* Read error status commands require only a short delay */
-		udelay(chip->chip_delay);
 		return;
 
 	case NAND_CMD_RESET:
@@ -759,18 +917,91 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 }
 
 /**
- * nand_get_device - [GENERIC] Get chip for selected access
+ * panic_nand_get_device - [GENERIC] Get chip for selected access
  * @chip: the nand chip descriptor
  * @mtd: MTD device structure
  * @new_state: the state which is requested
  *
+ * Used when in panic, no locks are taken.
+ */
+static void panic_nand_get_device(struct nand_chip *chip,
+		      struct mtd_info *mtd, int new_state)
+{
+	/* Hardware controller shared among independent devices */
+	chip->controller->active = chip;
+	chip->state = new_state;
+}
+
+/**
+ * nand_get_device - [GENERIC] Get chip for selected access
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
+ *
  * Get the device and lock it for exclusive access
  */
 static int
-nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
+nand_get_device(struct mtd_info *mtd, int new_state)
 {
+	struct nand_chip *chip = mtd->priv;
+#ifndef __UBOOT__
+	spinlock_t *lock = &chip->controller->lock;
+	wait_queue_head_t *wq = &chip->controller->wq;
+	DECLARE_WAITQUEUE(wait, current);
+retry:
+	spin_lock(lock);
+
+	/* Hardware controller shared among independent devices */
+	if (!chip->controller->active)
+		chip->controller->active = chip;
+
+	if (chip->controller->active == chip && chip->state == FL_READY) {
+		chip->state = new_state;
+		spin_unlock(lock);
+		return 0;
+	}
+	if (new_state == FL_PM_SUSPENDED) {
+		if (chip->controller->active->state == FL_PM_SUSPENDED) {
+			chip->state = FL_PM_SUSPENDED;
+			spin_unlock(lock);
+			return 0;
+		}
+	}
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	add_wait_queue(wq, &wait);
+	spin_unlock(lock);
+	schedule();
+	remove_wait_queue(wq, &wait);
+	goto retry;
+#else
 	chip->state = new_state;
 	return 0;
+#endif
+}
+
+/**
+ * panic_nand_wait - [GENERIC] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
+ * @timeo: timeout
+ *
+ * Wait for command done. This is a helper function for nand_wait used when
+ * we are in interrupt context. May happen when in panic and trying to write
+ * an oops through mtdoops.
+ */
+static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip,
+			    unsigned long timeo)
+{
+	int i;
+	for (i = 0; i < timeo; i++) {
+		if (chip->dev_ready) {
+			if (chip->dev_ready(mtd))
+				break;
+		} else {
+			if (chip->read_byte(mtd) & NAND_STATUS_READY)
+				break;
+		}
+		mdelay(1);
+	}
 }
 
 /**
@@ -784,28 +1015,42 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
  */
 static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
-	unsigned long	timeo;
-	int state = chip->state;
-	u32 time_start;
 
-	if (state == FL_ERASING)
-		timeo = (CONFIG_SYS_HZ * 400) / 1000;
-	else
-		timeo = (CONFIG_SYS_HZ * 20) / 1000;
+	int status, state = chip->state;
+	unsigned long timeo = (state == FL_ERASING ? 400 : 20);
 
-	if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
-		chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
-	else
-		chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+	led_trigger_event(nand_led_trigger, LED_FULL);
 
-	time_start = get_timer(0);
+	/*
+	 * Apply this short delay always to ensure that we do wait tWB in any
+	 * case on any machine.
+	 */
+	ndelay(100);
 
-	while (1) {
-		if (get_timer(time_start) > timeo) {
-			printf("Timeout!");
-			return 0x01;
-		}
+	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 
+#ifndef __UBOOT__
+	if (in_interrupt() || oops_in_progress)
+		panic_nand_wait(mtd, chip, timeo);
+	else {
+		timeo = jiffies + msecs_to_jiffies(timeo);
+		while (time_before(jiffies, timeo)) {
+			if (chip->dev_ready) {
+				if (chip->dev_ready(mtd))
+					break;
+			} else {
+				if (chip->read_byte(mtd) & NAND_STATUS_READY)
+					break;
+			}
+			cond_resched();
+		}
+	}
+#else
+ 	u32 timer = (CONFIG_SYS_HZ * timeo) / 1000;
+ 	u32 time_start;
+ 
+ 	time_start = get_timer(0);
+ 	while (get_timer(time_start) < timer) {
 		if (chip->dev_ready) {
 			if (chip->dev_ready(mtd))
 				break;
@@ -814,14 +1059,170 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
 				break;
 		}
 	}
-#ifdef PPCHAMELON_NAND_TIMER_HACK
-	time_start = get_timer(0);
-	while (get_timer(time_start) < 10)
-		;
-#endif /*  PPCHAMELON_NAND_TIMER_HACK */
+#endif
+	led_trigger_event(nand_led_trigger, LED_OFF);
+
+	status = (int)chip->read_byte(mtd);
+	/* This can happen if in case of timeout or buggy dev_ready */
+	WARN_ON(!(status & NAND_STATUS_READY));
+	return status;
+}
+
+#ifndef __UBOOT__
+/**
+ * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
+ * @invert: when = 0, unlock the range of blocks within the lower and
+ *                    upper boundary address
+ *          when = 1, unlock the range of blocks outside the boundaries
+ *                    of the lower and upper boundary address
+ *
+ * Returs unlock status.
+ */
+static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
+					uint64_t len, int invert)
+{
+	int ret = 0;
+	int status, page;
+	struct nand_chip *chip = mtd->priv;
+
+	/* Submit address of first page to unlock */
+	page = ofs >> chip->page_shift;
+	chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask);
+
+	/* Submit address of last page to unlock */
+	page = (ofs + len) >> chip->page_shift;
+	chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1,
+				(page | invert) & chip->pagemask);
+
+	/* Call wait ready function */
+	status = chip->waitfunc(mtd, chip);
+	/* See if device thinks it succeeded */
+	if (status & NAND_STATUS_FAIL) {
+		pr_debug("%s: error status = 0x%08x\n",
+					__func__, status);
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+/**
+ * nand_unlock - [REPLACEABLE] unlocks specified locked blocks
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
+ *
+ * Returns unlock status.
+ */
+int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	int ret = 0;
+	int chipnr;
+	struct nand_chip *chip = mtd->priv;
+
+	pr_debug("%s: start = 0x%012llx, len = %llu\n",
+			__func__, (unsigned long long)ofs, len);
+
+	if (check_offs_len(mtd, ofs, len))
+		ret = -EINVAL;
+
+	/* Align to last block address if size addresses end of the device */
+	if (ofs + len == mtd->size)
+		len -= mtd->erasesize;
+
+	nand_get_device(mtd, FL_UNLOCKING);
+
+	/* Shift to get chip number */
+	chipnr = ofs >> chip->chip_shift;
+
+	chip->select_chip(mtd, chipnr);
+
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd)) {
+		pr_debug("%s: device is write protected!\n",
+					__func__);
+		ret = -EIO;
+		goto out;
+	}
 
-	return (int)chip->read_byte(mtd);
+	ret = __nand_unlock(mtd, ofs, len, 0);
+
+out:
+	chip->select_chip(mtd, -1);
+	nand_release_device(mtd);
+
+	return ret;
 }
+EXPORT_SYMBOL(nand_unlock);
+
+/**
+ * nand_lock - [REPLACEABLE] locks all blocks present in the device
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
+ *
+ * This feature is not supported in many NAND parts. 'Micron' NAND parts do
+ * have this feature, but it allows only to lock all blocks, not for specified
+ * range for block. Implementing 'lock' feature by making use of 'unlock', for
+ * now.
+ *
+ * Returns lock status.
+ */
+int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	int ret = 0;
+	int chipnr, status, page;
+	struct nand_chip *chip = mtd->priv;
+
+	pr_debug("%s: start = 0x%012llx, len = %llu\n",
+			__func__, (unsigned long long)ofs, len);
+
+	if (check_offs_len(mtd, ofs, len))
+		ret = -EINVAL;
+
+	nand_get_device(mtd, FL_LOCKING);
+
+	/* Shift to get chip number */
+	chipnr = ofs >> chip->chip_shift;
+
+	chip->select_chip(mtd, chipnr);
+
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd)) {
+		pr_debug("%s: device is write protected!\n",
+					__func__);
+		status = MTD_ERASE_FAILED;
+		ret = -EIO;
+		goto out;
+	}
+
+	/* Submit address of first page to lock */
+	page = ofs >> chip->page_shift;
+	chip->cmdfunc(mtd, NAND_CMD_LOCK, -1, page & chip->pagemask);
+
+	/* Call wait ready function */
+	status = chip->waitfunc(mtd, chip);
+	/* See if device thinks it succeeded */
+	if (status & NAND_STATUS_FAIL) {
+		pr_debug("%s: error status = 0x%08x\n",
+					__func__, status);
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = __nand_unlock(mtd, ofs, len, 0x1);
+
+out:
+	chip->select_chip(mtd, -1);
+	nand_release_device(mtd);
+
+	return ret;
+}
+EXPORT_SYMBOL(nand_lock);
+#endif
 
 /**
  * nand_read_page_raw - [INTERN] read raw page data without ecc
@@ -904,6 +1305,7 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	uint8_t *ecc_code = chip->buffers->ecccode;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	unsigned int max_bitflips = 0;
 
 	chip->ecc.read_page_raw(mtd, chip, buf, 1, page);
 
@@ -920,16 +1322,18 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 		int stat;
 
 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 /**
- * nand_read_subpage - [REPLACEABLE] software ECC based sub-page read function
+ * nand_read_subpage - [REPLACEABLE] ECC based sub-page read function
  * @mtd: mtd info structure
  * @chip: nand chip info structure
  * @data_offs: offset of requested data within the page
@@ -946,6 +1350,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 	int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
 	int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
 	int index = 0;
+	unsigned int max_bitflips = 0;
 
 	/* Column address within the page aligned to ECC size (256bytes) */
 	start_step = data_offs / chip->ecc.size;
@@ -1010,12 +1415,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 
 		stat = chip->ecc.correct(mtd, p,
 			&chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 /**
@@ -1038,6 +1445,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	uint8_t *ecc_code = chip->buffers->ecccode;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	unsigned int max_bitflips = 0;
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		chip->ecc.hwctl(mtd, NAND_ECC_READ);
@@ -1056,12 +1464,14 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 		int stat;
 
 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 /**
@@ -1088,6 +1498,7 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
 	uint8_t *ecc_code = chip->buffers->ecccode;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
+	unsigned int max_bitflips = 0;
 
 	/* Read the OOB area first */
 	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
@@ -1105,12 +1516,14 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
 
 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 	}
-	return 0;
+	return max_bitflips;
 }
 
 /**
@@ -1132,6 +1545,7 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 	int eccsteps = chip->ecc.steps;
 	uint8_t *p = buf;
 	uint8_t *oob = chip->oob_poi;
+	unsigned int max_bitflips = 0;
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		int stat;
@@ -1148,10 +1562,12 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->read_buf(mtd, oob, eccbytes);
 		stat = chip->ecc.correct(mtd, p, oob, NULL);
 
-		if (stat < 0)
+		if (stat < 0) {
 			mtd->ecc_stats.failed++;
-		else
+		} else {
 			mtd->ecc_stats.corrected += stat;
+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
+		}
 
 		oob += eccbytes;
 
@@ -1166,7 +1582,7 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 	if (i)
 		chip->read_buf(mtd, oob, i);
 
-	return 0;
+	return max_bitflips;
 }
 
 /**
@@ -1218,6 +1634,30 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
 }
 
 /**
+ * nand_setup_read_retry - [INTERN] Set the READ RETRY mode
+ * @mtd: MTD device structure
+ * @retry_mode: the retry mode to use
+ *
+ * Some vendors supply a special command to shift the Vt threshold, to be used
+ * when there are too many bitflips in a page (i.e., ECC error). After setting
+ * a new threshold, the host should retry reading the page.
+ */
+static int nand_setup_read_retry(struct mtd_info *mtd, int retry_mode)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	pr_debug("setting READ RETRY mode %d\n", retry_mode);
+
+	if (retry_mode >= chip->read_retries)
+		return -EINVAL;
+
+	if (!chip->setup_read_retry)
+		return -EOPNOTSUPP;
+
+	return chip->setup_read_retry(mtd, retry_mode);
+}
+
+/**
  * nand_do_read_ops - [INTERN] Read data with ECC
  * @mtd: MTD device structure
  * @from: offset to read from
@@ -1230,7 +1670,6 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 {
 	int chipnr, page, realpage, col, bytes, aligned, oob_required;
 	struct nand_chip *chip = mtd->priv;
-	struct mtd_ecc_stats stats;
 	int ret = 0;
 	uint32_t readlen = ops->len;
 	uint32_t oobreadlen = ops->ooblen;
@@ -1239,8 +1678,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
 	uint8_t *bufpoi, *oob, *buf;
 	unsigned int max_bitflips = 0;
-
-	stats = mtd->ecc_stats;
+	int retry_mode = 0;
+	bool ecc_fail = false;
 
 	chipnr = (int)(from >> chip->chip_shift);
 	chip->select_chip(mtd, chipnr);
@@ -1255,7 +1694,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 	oob_required = oob ? 1 : 0;
 
 	while (1) {
-		WATCHDOG_RESET();
+		unsigned int ecc_failures = mtd->ecc_stats.failed;
 
 		bytes = min(mtd->writesize - col, readlen);
 		aligned = (bytes == mtd->writesize);
@@ -1264,6 +1703,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 		if (realpage != chip->pagebuf || oob) {
 			bufpoi = aligned ? buf : chip->buffers->databuf;
 
+read_retry:
 			chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
 
 			/*
@@ -1275,7 +1715,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 							      oob_required,
 							      page);
 			else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) &&
-			    !oob)
+				 !oob)
 				ret = chip->ecc.read_subpage(mtd, chip,
 							col, bytes, bufpoi);
 			else
@@ -1293,7 +1733,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 			/* Transfer not aligned data */
 			if (!aligned) {
 				if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
-				    !(mtd->ecc_stats.failed - stats.failed) &&
+				    !(mtd->ecc_stats.failed - ecc_failures) &&
 				    (ops->mode != MTD_OPS_RAW)) {
 					chip->pagebuf = realpage;
 					chip->pagebuf_bitflips = ret;
@@ -1304,8 +1744,6 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 				memcpy(buf, chip->buffers->databuf + col, bytes);
 			}
 
-			buf += bytes;
-
 			if (unlikely(oob)) {
 				int toread = min(oobreadlen, max_oobsize);
 
@@ -1315,6 +1753,33 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 					oobreadlen -= toread;
 				}
 			}
+
+			if (chip->options & NAND_NEED_READRDY) {
+				/* Apply delay or wait for ready/busy pin */
+				if (!chip->dev_ready)
+					udelay(chip->chip_delay);
+				else
+					nand_wait_ready(mtd);
+			}
+
+			if (mtd->ecc_stats.failed - ecc_failures) {
+				if (retry_mode + 1 < chip->read_retries) {
+					retry_mode++;
+					ret = nand_setup_read_retry(mtd,
+							retry_mode);
+					if (ret < 0)
+						break;
+
+					/* Reset failures; retry */
+					mtd->ecc_stats.failed = ecc_failures;
+					goto read_retry;
+				} else {
+					/* No more retry modes; real failure */
+					ecc_fail = true;
+				}
+			}
+
+			buf += bytes;
 		} else {
 			memcpy(buf, chip->buffers->databuf + col, bytes);
 			buf += bytes;
@@ -1324,6 +1789,14 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
 		readlen -= bytes;
 
+		/* Reset to retry mode 0 */
+		if (retry_mode) {
+			ret = nand_setup_read_retry(mtd, 0);
+			if (ret < 0)
+				break;
+			retry_mode = 0;
+		}
+
 		if (!readlen)
 			break;
 
@@ -1340,15 +1813,16 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 			chip->select_chip(mtd, chipnr);
 		}
 	}
+	chip->select_chip(mtd, -1);
 
 	ops->retlen = ops->len - (size_t) readlen;
 	if (oob)
 		ops->oobretlen = ops->ooblen - oobreadlen;
 
-	if (ret)
+	if (ret < 0)
 		return ret;
 
-	if (mtd->ecc_stats.failed - stats.failed)
+	if (ecc_fail)
 		return -EBADMSG;
 
 	return max_bitflips;
@@ -1367,11 +1841,10 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
 		     size_t *retlen, uint8_t *buf)
 {
-	struct nand_chip *chip = mtd->priv;
 	struct mtd_oob_ops ops;
 	int ret;
 
-	nand_get_device(chip, mtd, FL_READING);
+	nand_get_device(mtd, FL_READING);
 	ops.len = len;
 	ops.datbuf = buf;
 	ops.oobbuf = NULL;
@@ -1535,7 +2008,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 	uint8_t *buf = ops->oobbuf;
 	int ret = 0;
 
-	MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n",
+	pr_debug("%s: from = 0x%08Lx, len = %i\n",
 			__func__, (unsigned long long)from, readlen);
 
 	stats = mtd->ecc_stats;
@@ -1546,8 +2019,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 		len = mtd->oobsize;
 
 	if (unlikely(ops->ooboffs >= len)) {
-		MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read "
-					"outside oob\n", __func__);
+		pr_debug("%s: attempt to start read outside oob\n",
+				__func__);
 		return -EINVAL;
 	}
 
@@ -1555,8 +2028,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 	if (unlikely(from >= mtd->size ||
 		     ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
 					(from >> chip->page_shift)) * len)) {
-		MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end "
-					"of device\n", __func__);
+		pr_debug("%s: attempt to read beyond end of device\n",
+				__func__);
 		return -EINVAL;
 	}
 
@@ -1568,7 +2041,6 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 	page = realpage & chip->pagemask;
 
 	while (1) {
-		WATCHDOG_RESET();
 		if (ops->mode == MTD_OPS_RAW)
 			ret = chip->ecc.read_oob_raw(mtd, chip, page);
 		else
@@ -1580,6 +2052,14 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 		len = min(len, readlen);
 		buf = nand_transfer_oob(chip, buf, ops, len);
 
+		if (chip->options & NAND_NEED_READRDY) {
+			/* Apply delay or wait for ready/busy pin */
+			if (!chip->dev_ready)
+				udelay(chip->chip_delay);
+			else
+				nand_wait_ready(mtd);
+		}
+
 		readlen -= len;
 		if (!readlen)
 			break;
@@ -1595,6 +2075,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 			chip->select_chip(mtd, chipnr);
 		}
 	}
+	chip->select_chip(mtd, -1);
 
 	ops->oobretlen = ops->ooblen - readlen;
 
@@ -1618,19 +2099,18 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 static int nand_read_oob(struct mtd_info *mtd, loff_t from,
 			 struct mtd_oob_ops *ops)
 {
-	struct nand_chip *chip = mtd->priv;
 	int ret = -ENOTSUPP;
 
 	ops->retlen = 0;
 
 	/* Do not allow reads past end of device */
 	if (ops->datbuf && (from + ops->len) > mtd->size) {
-		MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read "
-				"beyond end of device\n", __func__);
+		pr_debug("%s: attempt to read beyond end of device\n",
+				__func__);
 		return -EINVAL;
 	}
 
-	nand_get_device(chip, mtd, FL_READING);
+	nand_get_device(mtd, FL_READING);
 
 	switch (ops->mode) {
 	case MTD_OPS_PLACE_OOB:
@@ -1772,6 +2252,68 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 	return 0;
 }
 
+
+/**
+ * nand_write_subpage_hwecc - [REPLACABLE] hardware ECC based subpage write
+ * @mtd:	mtd info structure
+ * @chip:	nand chip info structure
+ * @offset:	column address of subpage within the page
+ * @data_len:	data length
+ * @buf:	data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ */
+static int nand_write_subpage_hwecc(struct mtd_info *mtd,
+				struct nand_chip *chip, uint32_t offset,
+				uint32_t data_len, const uint8_t *buf,
+				int oob_required)
+{
+	uint8_t *oob_buf  = chip->oob_poi;
+	uint8_t *ecc_calc = chip->buffers->ecccalc;
+	int ecc_size      = chip->ecc.size;
+	int ecc_bytes     = chip->ecc.bytes;
+	int ecc_steps     = chip->ecc.steps;
+	uint32_t *eccpos  = chip->ecc.layout->eccpos;
+	uint32_t start_step = offset / ecc_size;
+	uint32_t end_step   = (offset + data_len - 1) / ecc_size;
+	int oob_bytes       = mtd->oobsize / ecc_steps;
+	int step, i;
+
+	for (step = 0; step < ecc_steps; step++) {
+		/* configure controller for WRITE access */
+		chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+
+		/* write data (untouched subpages already masked by 0xFF) */
+		chip->write_buf(mtd, buf, ecc_size);
+
+		/* mask ECC of un-touched subpages by padding 0xFF */
+		if ((step < start_step) || (step > end_step))
+			memset(ecc_calc, 0xff, ecc_bytes);
+		else
+			chip->ecc.calculate(mtd, buf, ecc_calc);
+
+		/* mask OOB of un-touched subpages by padding 0xFF */
+		/* if oob_required, preserve OOB metadata of written subpage */
+		if (!oob_required || (step < start_step) || (step > end_step))
+			memset(oob_buf, 0xff, oob_bytes);
+
+		buf += ecc_size;
+		ecc_calc += ecc_bytes;
+		oob_buf  += oob_bytes;
+	}
+
+	/* copy calculated ECC for whole page to chip->buffer->oob */
+	/* this include masked-value(0xFF) for unwritten subpages */
+	ecc_calc = chip->buffers->ecccalc;
+	for (i = 0; i < chip->ecc.total; i++)
+		chip->oob_poi[eccpos[i]] = ecc_calc[i];
+
+	/* write OOB buffer to NAND device */
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
+
 /**
  * nand_write_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page write
  * @mtd: mtd info structure
@@ -1824,6 +2366,8 @@ static int nand_write_page_syndrome(struct mtd_info *mtd,
  * nand_write_page - [REPLACEABLE] write one page
  * @mtd: MTD device structure
  * @chip: NAND chip descriptor
+ * @offset: address offset within the page
+ * @data_len: length of actual data to be written
  * @buf: the data to write
  * @oob_required: must write chip->oob_poi to OOB
  * @page: page number to write
@@ -1831,15 +2375,25 @@ static int nand_write_page_syndrome(struct mtd_info *mtd,
  * @raw: use _raw version of write_page
  */
 static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
-			   const uint8_t *buf, int oob_required, int page,
-			   int cached, int raw)
+		uint32_t offset, int data_len, const uint8_t *buf,
+		int oob_required, int page, int cached, int raw)
 {
-	int status;
+	int status, subpage;
+
+	if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
+		chip->ecc.write_subpage)
+		subpage = offset || (data_len < mtd->writesize);
+	else
+		subpage = 0;
 
 	chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
 
 	if (unlikely(raw))
-		status = chip->ecc.write_page_raw(mtd, chip, buf, oob_required);
+		status = chip->ecc.write_page_raw(mtd, chip, buf,
+							oob_required);
+	else if (subpage)
+		status = chip->ecc.write_subpage(mtd, chip, offset, data_len,
+							 buf, oob_required);
 	else
 		status = chip->ecc.write_page(mtd, chip, buf, oob_required);
 
@@ -1852,7 +2406,7 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 	 */
 	cached = 0;
 
-	if (!cached || !(chip->options & NAND_CACHEPRG)) {
+	if (!cached || !NAND_HAS_CACHEPROG(chip)) {
 
 		chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
 		status = chip->waitfunc(mtd, chip);
@@ -1871,7 +2425,9 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 		status = chip->waitfunc(mtd, chip);
 	}
 
-#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+
+#ifdef __UBOOT__
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 	/* Send command to read back the data */
 	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
 
@@ -1881,6 +2437,8 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 	/* Make sure the next page prog is preceded by a status read */
 	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 #endif
+#endif
+
 	return 0;
 }
 
@@ -1963,26 +2521,34 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 
 	uint8_t *oob = ops->oobbuf;
 	uint8_t *buf = ops->datbuf;
-	int ret, subpage;
+	int ret;
 	int oob_required = oob ? 1 : 0;
 
 	ops->retlen = 0;
 	if (!writelen)
 		return 0;
 
-	column = to & (mtd->writesize - 1);
-	subpage = column || (writelen & (mtd->writesize - 1));
-
-	if (subpage && oob)
+#ifndef __UBOOT__
+	/* Reject writes, which are not page aligned */
+	if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
+#else
+	/* Reject writes, which are not page aligned */
+	if (NOTALIGNED(to)) {
+#endif
+		pr_notice("%s: attempt to write non page aligned data\n",
+			   __func__);
 		return -EINVAL;
+	}
+
+	column = to & (mtd->writesize - 1);
 
 	chipnr = (int)(to >> chip->chip_shift);
 	chip->select_chip(mtd, chipnr);
 
 	/* Check, if it is write protected */
 	if (nand_check_wp(mtd)) {
-		printk (KERN_NOTICE "nand_do_write_ops: Device is write protected\n");
-		return -EIO;
+		ret = -EIO;
+		goto err_out;
 	}
 
 	realpage = (int)(to >> chip->page_shift);
@@ -1995,18 +2561,18 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 		chip->pagebuf = -1;
 
 	/* Don't allow multipage oob writes with offset */
-	if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
-		return -EINVAL;
+	if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen)) {
+		ret = -EINVAL;
+		goto err_out;
+	}
 
 	while (1) {
-		WATCHDOG_RESET();
-
 		int bytes = mtd->writesize;
 		int cached = writelen > bytes && page != blockmask;
 		uint8_t *wbuf = buf;
 
 		/* Partial page write? */
-		if (unlikely(column || writelen < mtd->writesize)) {
+		if (unlikely(column || writelen < (mtd->writesize - 1))) {
 			cached = 0;
 			bytes = min_t(int, bytes - column, (int) writelen);
 			chip->pagebuf = -1;
@@ -2023,9 +2589,9 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 			/* We still need to erase leftover OOB data */
 			memset(chip->oob_poi, 0xff, mtd->oobsize);
 		}
-
-		ret = chip->write_page(mtd, chip, wbuf, oob_required, page,
-				       cached, (ops->mode == MTD_OPS_RAW));
+		ret = chip->write_page(mtd, chip, column, bytes, wbuf,
+					oob_required, page, cached,
+					(ops->mode == MTD_OPS_RAW));
 		if (ret)
 			break;
 
@@ -2033,22 +2599,60 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 		if (!writelen)
 			break;
 
-		column = 0;
-		buf += bytes;
-		realpage++;
+		column = 0;
+		buf += bytes;
+		realpage++;
+
+		page = realpage & chip->pagemask;
+		/* Check, if we cross a chip boundary */
+		if (!page) {
+			chipnr++;
+			chip->select_chip(mtd, -1);
+			chip->select_chip(mtd, chipnr);
+		}
+	}
+
+	ops->retlen = ops->len - writelen;
+	if (unlikely(oob))
+		ops->oobretlen = ops->ooblen;
+
+err_out:
+	chip->select_chip(mtd, -1);
+	return ret;
+}
+
+/**
+ * panic_nand_write - [MTD Interface] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
+ *
+ * NAND write with ECC. Used when performing writes in interrupt context, this
+ * may for example be called by mtdoops when writing an oops while in panic.
+ */
+static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
+			    size_t *retlen, const uint8_t *buf)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct mtd_oob_ops ops;
+	int ret;
+
+	/* Wait for the device to get ready */
+	panic_nand_wait(mtd, chip, 400);
+
+	/* Grab the device */
+	panic_nand_get_device(chip, mtd, FL_WRITING);
 
-		page = realpage & chip->pagemask;
-		/* Check, if we cross a chip boundary */
-		if (!page) {
-			chipnr++;
-			chip->select_chip(mtd, -1);
-			chip->select_chip(mtd, chipnr);
-		}
-	}
+	ops.len = len;
+	ops.datbuf = (uint8_t *)buf;
+	ops.oobbuf = NULL;
+	ops.mode = MTD_OPS_PLACE_OOB;
 
-	ops->retlen = ops->len - writelen;
-	if (unlikely(oob))
-		ops->oobretlen = ops->ooblen;
+	ret = nand_do_write_ops(mtd, to, &ops);
+
+	*retlen = ops.retlen;
 	return ret;
 }
 
@@ -2065,11 +2669,10 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 			  size_t *retlen, const uint8_t *buf)
 {
-	struct nand_chip *chip = mtd->priv;
 	struct mtd_oob_ops ops;
 	int ret;
 
-	nand_get_device(chip, mtd, FL_WRITING);
+	nand_get_device(mtd, FL_WRITING);
 	ops.len = len;
 	ops.datbuf = (uint8_t *)buf;
 	ops.oobbuf = NULL;
@@ -2094,7 +2697,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 	int chipnr, page, status, len;
 	struct nand_chip *chip = mtd->priv;
 
-	MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+	pr_debug("%s: to = 0x%08x, len = %i\n",
 			 __func__, (unsigned int)to, (int)ops->ooblen);
 
 	if (ops->mode == MTD_OPS_AUTO_OOB)
@@ -2104,14 +2707,14 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 
 	/* Do not allow write past end of page */
 	if ((ops->ooboffs + ops->ooblen) > len) {
-		MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write "
-				"past end of page\n", __func__);
+		pr_debug("%s: attempt to write past end of page\n",
+				__func__);
 		return -EINVAL;
 	}
 
 	if (unlikely(ops->ooboffs >= len)) {
-		MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start "
-				"write outside oob\n", __func__);
+		pr_debug("%s: attempt to start write outside oob\n",
+				__func__);
 		return -EINVAL;
 	}
 
@@ -2120,8 +2723,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 		     ops->ooboffs + ops->ooblen >
 			((mtd->size >> chip->page_shift) -
 			 (to >> chip->page_shift)) * len)) {
-		MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
-				"end of device\n", __func__);
+		pr_debug("%s: attempt to write beyond end of device\n",
+				__func__);
 		return -EINVAL;
 	}
 
@@ -2140,8 +2743,10 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
 
 	/* Check, if it is write protected */
-	if (nand_check_wp(mtd))
+	if (nand_check_wp(mtd)) {
+		chip->select_chip(mtd, -1);
 		return -EROFS;
+	}
 
 	/* Invalidate the page cache, if we write to the cached page */
 	if (page == chip->pagebuf)
@@ -2154,6 +2759,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 	else
 		status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
 
+	chip->select_chip(mtd, -1);
+
 	if (status)
 		return status;
 
@@ -2171,19 +2778,18 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 static int nand_write_oob(struct mtd_info *mtd, loff_t to,
 			  struct mtd_oob_ops *ops)
 {
-	struct nand_chip *chip = mtd->priv;
 	int ret = -ENOTSUPP;
 
 	ops->retlen = 0;
 
 	/* Do not allow writes past end of device */
 	if (ops->datbuf && (to + ops->len) > mtd->size) {
-		MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
-				"end of device\n", __func__);
+		pr_debug("%s: attempt to write beyond end of device\n",
+				__func__);
 		return -EINVAL;
 	}
 
-	nand_get_device(chip, mtd, FL_WRITING);
+	nand_get_device(mtd, FL_WRITING);
 
 	switch (ops->mode) {
 	case MTD_OPS_PLACE_OOB:
@@ -2221,24 +2827,6 @@ static void single_erase_cmd(struct mtd_info *mtd, int page)
 }
 
 /**
- * multi_erase_cmd - [GENERIC] AND specific block erase command function
- * @mtd: MTD device structure
- * @page: the page address of the block which will be erased
- *
- * AND multi block erase command function. Erase 4 consecutive blocks.
- */
-static void multi_erase_cmd(struct mtd_info *mtd, int page)
-{
-	struct nand_chip *chip = mtd->priv;
-	/* Send commands to erase a block */
-	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
-	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
-	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
-	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
-	chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
-}
-
-/**
  * nand_erase - [MTD Interface] erase block(s)
  * @mtd: MTD device structure
  * @instr: erase instruction
@@ -2250,7 +2838,6 @@ static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
 	return nand_erase_nand(mtd, instr, 0);
 }
 
-#define BBT_PAGE_MASK	0xffffff3f
 /**
  * nand_erase_nand - [INTERN] erase block(s)
  * @mtd: MTD device structure
@@ -2264,19 +2851,17 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 {
 	int page, status, pages_per_block, ret, chipnr;
 	struct nand_chip *chip = mtd->priv;
-	loff_t rewrite_bbt[CONFIG_SYS_NAND_MAX_CHIPS] = {0};
-	unsigned int bbt_masked_page = 0xffffffff;
 	loff_t len;
 
-	MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
-				__func__, (unsigned long long)instr->addr,
-				(unsigned long long)instr->len);
+	pr_debug("%s: start = 0x%012llx, len = %llu\n",
+			__func__, (unsigned long long)instr->addr,
+			(unsigned long long)instr->len);
 
 	if (check_offs_len(mtd, instr->addr, instr->len))
 		return -EINVAL;
 
 	/* Grab the lock and see if the device is available */
-	nand_get_device(chip, mtd, FL_ERASING);
+	nand_get_device(mtd, FL_ERASING);
 
 	/* Shift to get first page */
 	page = (int)(instr->addr >> chip->page_shift);
@@ -2290,33 +2875,23 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 
 	/* Check, if it is write protected */
 	if (nand_check_wp(mtd)) {
-		MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
-					__func__);
+		pr_debug("%s: device is write protected!\n",
+				__func__);
 		instr->state = MTD_ERASE_FAILED;
 		goto erase_exit;
 	}
 
-	/*
-	 * If BBT requires refresh, set the BBT page mask to see if the BBT
-	 * should be rewritten. Otherwise the mask is set to 0xffffffff which
-	 * can not be matched. This is also done when the bbt is actually
-	 * erased to avoid recursive updates.
-	 */
-	if (chip->options & BBT_AUTO_REFRESH && !allowbbt)
-		bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
-
 	/* Loop through the pages */
 	len = instr->len;
 
 	instr->state = MTD_ERASING;
 
 	while (len) {
-		WATCHDOG_RESET();
 		/* Check if we have a bad block, we do not erase bad blocks! */
-		if (!instr->scrub && nand_block_checkbad(mtd, ((loff_t) page) <<
+		if (nand_block_checkbad(mtd, ((loff_t) page) <<
 					chip->page_shift, 0, allowbbt)) {
 			pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
-				   __func__, page);
+				    __func__, page);
 			instr->state = MTD_ERASE_FAILED;
 			goto erase_exit;
 		}
@@ -2343,25 +2918,16 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 
 		/* See if block erase succeeded */
 		if (status & NAND_STATUS_FAIL) {
-			MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, "
-					"page 0x%08x\n", __func__, page);
+			pr_debug("%s: failed erase, page 0x%08x\n",
+					__func__, page);
 			instr->state = MTD_ERASE_FAILED;
 			instr->fail_addr =
 				((loff_t)page << chip->page_shift);
 			goto erase_exit;
 		}
 
-		/*
-		 * If BBT requires refresh, set the BBT rewrite flag to the
-		 * page being erased.
-		 */
-		if (bbt_masked_page != 0xffffffff &&
-		    (page & BBT_PAGE_MASK) == bbt_masked_page)
-			rewrite_bbt[chipnr] =
-				((loff_t)page << chip->page_shift);
-
 		/* Increment page address and decrement length */
-		len -= (1 << chip->phys_erase_shift);
+		len -= (1ULL << chip->phys_erase_shift);
 		page += pages_per_block;
 
 		/* Check, if we cross a chip boundary */
@@ -2369,15 +2935,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 			chipnr++;
 			chip->select_chip(mtd, -1);
 			chip->select_chip(mtd, chipnr);
-
-			/*
-			 * If BBT requires refresh and BBT-PERCHIP, set the BBT
-			 * page mask to see if this BBT should be rewritten.
-			 */
-			if (bbt_masked_page != 0xffffffff &&
-			    (chip->bbt_td->options & NAND_BBT_PERCHIP))
-				bbt_masked_page = chip->bbt_td->pages[chipnr] &
-					BBT_PAGE_MASK;
 		}
 	}
 	instr->state = MTD_ERASE_DONE;
@@ -2387,29 +2944,13 @@ erase_exit:
 	ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
 
 	/* Deselect and wake up anyone waiting on the device */
+	chip->select_chip(mtd, -1);
 	nand_release_device(mtd);
 
 	/* Do call back function */
 	if (!ret)
 		mtd_erase_callback(instr);
 
-	/*
-	 * If BBT requires refresh and erase was successful, rewrite any
-	 * selected bad block tables.
-	 */
-	if (bbt_masked_page == 0xffffffff || ret)
-		return ret;
-
-	for (chipnr = 0; chipnr < chip->numchips; chipnr++) {
-		if (!rewrite_bbt[chipnr])
-			continue;
-		/* Update the BBT for chip */
-		MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt "
-			"(%d:0x%0llx 0x%0x)\n", __func__, chipnr,
-			rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]);
-		nand_update_bbt(mtd, rewrite_bbt[chipnr]);
-	}
-
 	/* Return more or less happy */
 	return ret;
 }
@@ -2422,12 +2963,10 @@ erase_exit:
  */
 static void nand_sync(struct mtd_info *mtd)
 {
-	struct nand_chip *chip = mtd->priv;
-
-	MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
+	pr_debug("%s: called\n", __func__);
 
 	/* Grab the lock and see if the device is available */
-	nand_get_device(chip, mtd, FL_SYNCING);
+	nand_get_device(mtd, FL_SYNCING);
 	/* Release it and go back */
 	nand_release_device(mtd);
 }
@@ -2449,7 +2988,6 @@ static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
  */
 static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
-	struct nand_chip *chip = mtd->priv;
 	int ret;
 
 	ret = nand_block_isbad(mtd, ofs);
@@ -2460,10 +2998,10 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
 		return ret;
 	}
 
-	return chip->block_markbad(mtd, ofs);
+	return nand_block_markbad_lowlevel(mtd, ofs);
 }
 
- /**
+/**
  * nand_onfi_set_features- [REPLACEABLE] set features for ONFI nand
  * @mtd: MTD device structure
  * @chip: nand chip info structure
@@ -2474,12 +3012,19 @@ static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip,
 			int addr, uint8_t *subfeature_param)
 {
 	int status;
+	int i;
 
-	if (!chip->onfi_version)
+#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
+	if (!chip->onfi_version ||
+	    !(le16_to_cpu(chip->onfi_params.opt_cmd)
+	      & ONFI_OPT_CMD_SET_GET_FEATURES))
 		return -EINVAL;
+#endif
 
 	chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, addr, -1);
-	chip->write_buf(mtd, subfeature_param, ONFI_SUBFEATURE_PARAM_LEN);
+	for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
+		chip->write_byte(mtd, subfeature_param[i]);
+
 	status = chip->waitfunc(mtd, chip);
 	if (status & NAND_STATUS_FAIL)
 		return -EIO;
@@ -2496,17 +3041,50 @@ static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip,
 static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip,
 			int addr, uint8_t *subfeature_param)
 {
-	if (!chip->onfi_version)
+	int i;
+
+#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
+	if (!chip->onfi_version ||
+	    !(le16_to_cpu(chip->onfi_params.opt_cmd)
+	      & ONFI_OPT_CMD_SET_GET_FEATURES))
 		return -EINVAL;
+#endif
 
 	/* clear the sub feature parameters */
 	memset(subfeature_param, 0, ONFI_SUBFEATURE_PARAM_LEN);
 
 	chip->cmdfunc(mtd, NAND_CMD_GET_FEATURES, addr, -1);
-	chip->read_buf(mtd, subfeature_param, ONFI_SUBFEATURE_PARAM_LEN);
+	for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
+		*subfeature_param++ = chip->read_byte(mtd);
 	return 0;
 }
 
+#ifndef __UBOOT__
+/**
+ * nand_suspend - [MTD Interface] Suspend the NAND flash
+ * @mtd: MTD device structure
+ */
+static int nand_suspend(struct mtd_info *mtd)
+{
+	return nand_get_device(mtd, FL_PM_SUSPENDED);
+}
+
+/**
+ * nand_resume - [MTD Interface] Resume the NAND flash
+ * @mtd: MTD device structure
+ */
+static void nand_resume(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (chip->state == FL_PM_SUSPENDED)
+		nand_release_device(mtd);
+	else
+		pr_err("%s called for a chip which is not in suspended state\n",
+			__func__);
+}
+#endif
+
 /* Set default functions */
 static void nand_set_defaults(struct nand_chip *chip, int busw)
 {
@@ -2524,7 +3102,15 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 
 	if (!chip->select_chip)
 		chip->select_chip = nand_select_chip;
-	if (!chip->read_byte)
+
+	/* set for ONFI nand */
+	if (!chip->onfi_set_features)
+		chip->onfi_set_features = nand_onfi_set_features;
+	if (!chip->onfi_get_features)
+		chip->onfi_get_features = nand_onfi_get_features;
+
+	/* If called twice, pointers that depend on busw may need to be reset */
+	if (!chip->read_byte || chip->read_byte == nand_read_byte)
 		chip->read_byte = busw ? nand_read_byte16 : nand_read_byte;
 	if (!chip->read_word)
 		chip->read_word = nand_read_word;
@@ -2532,21 +3118,36 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 		chip->block_bad = nand_block_bad;
 	if (!chip->block_markbad)
 		chip->block_markbad = nand_default_block_markbad;
-	if (!chip->write_buf)
+	if (!chip->write_buf || chip->write_buf == nand_write_buf)
 		chip->write_buf = busw ? nand_write_buf16 : nand_write_buf;
-	if (!chip->read_buf)
+	if (!chip->write_byte || chip->write_byte == nand_write_byte)
+		chip->write_byte = busw ? nand_write_byte16 : nand_write_byte;
+	if (!chip->read_buf || chip->read_buf == nand_read_buf)
 		chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
-	if (!chip->verify_buf)
-		chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
 	if (!chip->scan_bbt)
 		chip->scan_bbt = nand_default_bbt;
-	if (!chip->controller)
+#ifdef __UBOOT__
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
+	if (!chip->verify_buf)
+		chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
+#endif
+#endif
+
+	if (!chip->controller) {
 		chip->controller = &chip->hwcontrol;
+		spin_lock_init(&chip->controller->lock);
+		init_waitqueue_head(&chip->controller->wq);
+	}
+
 }
 
 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION
 /* Sanitize ONFI strings so we can safely print them */
+#ifndef __UBOOT__
+static void sanitize_string(uint8_t *s, size_t len)
+#else
 static void sanitize_string(char *s, size_t len)
+#endif
 {
 	ssize_t i;
 
@@ -2575,6 +3176,105 @@ static u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
 	return crc;
 }
 
+/* Parse the Extended Parameter Page. */
+static int nand_flash_detect_ext_param_page(struct mtd_info *mtd,
+		struct nand_chip *chip, struct nand_onfi_params *p)
+{
+	struct onfi_ext_param_page *ep;
+	struct onfi_ext_section *s;
+	struct onfi_ext_ecc_info *ecc;
+	uint8_t *cursor;
+	int ret = -EINVAL;
+	int len;
+	int i;
+
+	len = le16_to_cpu(p->ext_param_page_length) * 16;
+	ep = kmalloc(len, GFP_KERNEL);
+	if (!ep)
+		return -ENOMEM;
+
+	/* Send our own NAND_CMD_PARAM. */
+	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
+
+	/* Use the Change Read Column command to skip the ONFI param pages. */
+	chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+			sizeof(*p) * p->num_of_param_pages , -1);
+
+	/* Read out the Extended Parameter Page. */
+	chip->read_buf(mtd, (uint8_t *)ep, len);
+	if ((onfi_crc16(ONFI_CRC_BASE, ((uint8_t *)ep) + 2, len - 2)
+		!= le16_to_cpu(ep->crc))) {
+		pr_debug("fail in the CRC.\n");
+		goto ext_out;
+	}
+
+	/*
+	 * Check the signature.
+	 * Do not strictly follow the ONFI spec, maybe changed in future.
+	 */
+#ifndef __UBOOT__
+	if (strncmp(ep->sig, "EPPS", 4)) {
+#else
+	if (strncmp((char *)ep->sig, "EPPS", 4)) {
+#endif
+		pr_debug("The signature is invalid.\n");
+		goto ext_out;
+	}
+
+	/* find the ECC section. */
+	cursor = (uint8_t *)(ep + 1);
+	for (i = 0; i < ONFI_EXT_SECTION_MAX; i++) {
+		s = ep->sections + i;
+		if (s->type == ONFI_SECTION_TYPE_2)
+			break;
+		cursor += s->length * 16;
+	}
+	if (i == ONFI_EXT_SECTION_MAX) {
+		pr_debug("We can not find the ECC section.\n");
+		goto ext_out;
+	}
+
+	/* get the info we want. */
+	ecc = (struct onfi_ext_ecc_info *)cursor;
+
+	if (!ecc->codeword_size) {
+		pr_debug("Invalid codeword size\n");
+		goto ext_out;
+	}
+
+	chip->ecc_strength_ds = ecc->ecc_bits;
+	chip->ecc_step_ds = 1 << ecc->codeword_size;
+	ret = 0;
+
+ext_out:
+	kfree(ep);
+	return ret;
+}
+
+static int nand_setup_read_retry_micron(struct mtd_info *mtd, int retry_mode)
+{
+	struct nand_chip *chip = mtd->priv;
+	uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode};
+
+	return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY,
+			feature);
+}
+
+/*
+ * Configure chip properties from Micron vendor-specific ONFI table
+ */
+static void nand_onfi_detect_micron(struct nand_chip *chip,
+		struct nand_onfi_params *p)
+{
+	struct nand_onfi_vendor_micron *micron = (void *)p->vendor;
+
+	if (le16_to_cpu(p->vendor_revision) < 1)
+		return;
+
+	chip->read_retries = micron->read_retry_options;
+	chip->setup_read_retry = nand_setup_read_retry_micron;
+}
+
 /*
  * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
  */
@@ -2591,18 +3291,28 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
 		return 0;
 
+	/*
+	 * ONFI must be probed in 8-bit mode or with NAND_BUSWIDTH_AUTO, not
+	 * with NAND_BUSWIDTH_16
+	 */
+	if (chip->options & NAND_BUSWIDTH_16) {
+		pr_err("ONFI cannot be probed in 16-bit mode; aborting\n");
+		return 0;
+	}
+
 	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
 	for (i = 0; i < 3; i++) {
 		chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
 		if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
 				le16_to_cpu(p->crc)) {
-			pr_info("ONFI param page %d valid\n", i);
 			break;
 		}
 	}
 
-	if (i == 3)
+	if (i == 3) {
+		pr_err("Could not find valid ONFI parameter page; aborting\n");
 		return 0;
+	}
 
 	/* Check version */
 	val = le16_to_cpu(p->revision);
@@ -2616,11 +3326,9 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->onfi_version = 20;
 	else if (val & (1 << 1))
 		chip->onfi_version = 10;
-	else
-		chip->onfi_version = 0;
 
 	if (!chip->onfi_version) {
-		pr_info("%s: unsupported ONFI version: %d\n", __func__, val);
+		pr_info("unsupported ONFI version: %d\n", val);
 		return 0;
 	}
 
@@ -2628,21 +3336,58 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 	sanitize_string(p->model, sizeof(p->model));
 	if (!mtd->name)
 		mtd->name = p->model;
+
 	mtd->writesize = le32_to_cpu(p->byte_per_page);
-	mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
+
+	/*
+	 * pages_per_block and blocks_per_lun may not be a power-of-2 size
+	 * (don't ask me who thought of this...). MTD assumes that these
+	 * dimensions will be power-of-2, so just truncate the remaining area.
+	 */
+	mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+	mtd->erasesize *= mtd->writesize;
+
 	mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
-	chip->chipsize = le32_to_cpu(p->blocks_per_lun);
+
+	/* See erasesize comment */
+	chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
 	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
-	*busw = 0;
-	if (le16_to_cpu(p->features) & 1)
+	chip->bits_per_cell = p->bits_per_cell;
+
+	if (onfi_feature(chip) & ONFI_FEATURE_16_BIT_BUS)
 		*busw = NAND_BUSWIDTH_16;
+	else
+		*busw = 0;
+
+	if (p->ecc_bits != 0xff) {
+		chip->ecc_strength_ds = p->ecc_bits;
+		chip->ecc_step_ds = 512;
+	} else if (chip->onfi_version >= 21 &&
+		(onfi_feature(chip) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
+
+		/*
+		 * The nand_flash_detect_ext_param_page() uses the
+		 * Change Read Column command which maybe not supported
+		 * by the chip->cmdfunc. So try to update the chip->cmdfunc
+		 * now. We do not replace user supplied command function.
+		 */
+		if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
+			chip->cmdfunc = nand_command_lp;
+
+		/* The Extended Parameter Page is supported since ONFI 2.1. */
+		if (nand_flash_detect_ext_param_page(mtd, chip, p))
+			pr_warn("Failed to detect ONFI extended param page\n");
+	} else {
+		pr_warn("Could not retrieve ONFI ECC requirements\n");
+	}
+
+	if (p->jedec_id == NAND_MFR_MICRON)
+		nand_onfi_detect_micron(chip, p);
 
-	pr_info("ONFI flash detected\n");
 	return 1;
 }
 #else
-static inline int nand_flash_detect_onfi(struct mtd_info *mtd,
-					struct nand_chip *chip,
+static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 					int *busw)
 {
 	return 0;
@@ -2657,7 +3402,7 @@ static inline int nand_flash_detect_onfi(struct mtd_info *mtd,
  *
  * Check if an ID string is repeated within a given sequence of bytes at
  * specific repetition interval period (e.g., {0x20,0x01,0x7F,0x20} has a
- * period of 2). This is a helper function for nand_id_len(). Returns non-zero
+ * period of 3). This is a helper function for nand_id_len(). Returns non-zero
  * if the repetition has a period of @period; otherwise, returns zero.
  */
 static int nand_id_has_period(u8 *id_data, int arrlen, int period)
@@ -2708,6 +3453,16 @@ static int nand_id_len(u8 *id_data, int arrlen)
 	return arrlen;
 }
 
+/* Extract the bits of per cell from the 3rd byte of the extended ID */
+static int nand_get_bits_per_cell(u8 cellinfo)
+{
+	int bits;
+
+	bits = cellinfo & NAND_CI_CELLTYPE_MSK;
+	bits >>= NAND_CI_CELLTYPE_SHIFT;
+	return bits + 1;
+}
+
 /*
  * Many new NAND share similar device ID codes, which represent the size of the
  * chip. The rest of the parameters must be decoded according to generic or
@@ -2718,7 +3473,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
 {
 	int extid, id_len;
 	/* The 3rd id byte holds MLC / multichip data */
-	chip->cellinfo = id_data[2];
+	chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
 	/* The 4th id byte is the important one */
 	extid = id_data[3];
 
@@ -2734,8 +3489,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
 	 * ID to decide what to do.
 	 */
 	if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG &&
-			(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
-			id_data[5] != 0x00) {
+			!nand_is_slc(chip) && id_data[5] != 0x00) {
 		/* Calc pagesize */
 		mtd->writesize = 2048 << (extid & 0x03);
 		extid >>= 2;
@@ -2757,9 +3511,12 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
 			mtd->oobsize = 512;
 			break;
 		case 6:
-		default: /* Other cases are "reserved" (unknown) */
 			mtd->oobsize = 640;
 			break;
+		case 7:
+		default: /* Other cases are "reserved" (unknown) */
+			mtd->oobsize = 1024;
+			break;
 		}
 		extid >>= 2;
 		/* Calc blocksize */
@@ -2767,7 +3524,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
 			(((extid >> 1) & 0x04) | (extid & 0x03));
 		*busw = 0;
 	} else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX &&
-			(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
+			!nand_is_slc(chip)) {
 		unsigned int tmp;
 
 		/* Calc pagesize */
@@ -2820,16 +3577,32 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
 		extid >>= 2;
 		/* Get buswidth information */
 		*busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+
+		/*
+		 * Toshiba 24nm raw SLC (i.e., not BENAND) have 32B OOB per
+		 * 512B page. For Toshiba SLC, we decode the 5th/6th byte as
+		 * follows:
+		 * - ID byte 6, bits[2:0]: 100b -> 43nm, 101b -> 32nm,
+		 *                         110b -> 24nm
+		 * - ID byte 5, bit[7]:    1 -> BENAND, 0 -> raw SLC
+		 */
+		if (id_len >= 6 && id_data[0] == NAND_MFR_TOSHIBA &&
+				nand_is_slc(chip) &&
+				(id_data[5] & 0x7) == 0x6 /* 24nm */ &&
+				!(id_data[4] & 0x80) /* !BENAND */) {
+			mtd->oobsize = 32 * mtd->writesize >> 9;
+		}
+
 	}
 }
 
- /*
+/*
  * Old devices have chip data hardcoded in the device ID table. nand_decode_id
  * decodes a matching ID table entry and assigns the MTD size parameters for
  * the chip.
  */
 static void nand_decode_id(struct mtd_info *mtd, struct nand_chip *chip,
-				const struct nand_flash_dev *type, u8 id_data[8],
+				struct nand_flash_dev *type, u8 id_data[8],
 				int *busw)
 {
 	int maf_id = id_data[0];
@@ -2839,6 +3612,9 @@ static void nand_decode_id(struct mtd_info *mtd, struct nand_chip *chip,
 	mtd->oobsize = mtd->writesize / 32;
 	*busw = type->options & NAND_BUSWIDTH_16;
 
+	/* All legacy ID NAND are small-page, SLC */
+	chip->bits_per_cell = 1;
+
 	/*
 	 * Check for Spansion/AMD ID + repeating 5th, 6th byte since
 	 * some Spansion chips have erasesize that conflicts with size
@@ -2853,7 +3629,7 @@ static void nand_decode_id(struct mtd_info *mtd, struct nand_chip *chip,
 	}
 }
 
- /*
+/*
  * Set the bad block marker/indicator (BBM/BBI) patterns according to some
  * heuristic patterns using various detected parameters (e.g., manufacturer,
  * page size, cell-type information).
@@ -2875,11 +3651,11 @@ static void nand_decode_bbm_options(struct mtd_info *mtd,
 	 * Micron devices with 2KiB pages and on SLC Samsung, Hynix, Toshiba,
 	 * AMD/Spansion, and Macronix.  All others scan only the first page.
 	 */
-	if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+	if (!nand_is_slc(chip) &&
 			(maf_id == NAND_MFR_SAMSUNG ||
 			 maf_id == NAND_MFR_HYNIX))
 		chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
-	else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+	else if ((nand_is_slc(chip) &&
 				(maf_id == NAND_MFR_SAMSUNG ||
 				 maf_id == NAND_MFR_HYNIX ||
 				 maf_id == NAND_MFR_TOSHIBA ||
@@ -2890,16 +3666,48 @@ static void nand_decode_bbm_options(struct mtd_info *mtd,
 		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
 }
 
+static inline bool is_full_id_nand(struct nand_flash_dev *type)
+{
+	return type->id_len;
+}
+
+static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
+		   struct nand_flash_dev *type, u8 *id_data, int *busw)
+{
+#ifndef __UBOOT__
+	if (!strncmp(type->id, id_data, type->id_len)) {
+#else
+	if (!strncmp((char *)type->id, (char *)id_data, type->id_len)) {
+#endif
+		mtd->writesize = type->pagesize;
+		mtd->erasesize = type->erasesize;
+		mtd->oobsize = type->oobsize;
+
+		chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
+		chip->chipsize = (uint64_t)type->chipsize << 20;
+		chip->options |= type->options;
+		chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);
+		chip->ecc_step_ds = NAND_ECC_STEP(type);
+
+		*busw = type->options & NAND_BUSWIDTH_16;
+
+		if (!mtd->name)
+			mtd->name = type->name;
+
+		return true;
+	}
+	return false;
+}
+
 /*
  * Get the flash and manufacturer id and lookup if the type is supported.
  */
-static const struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
+static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 						  struct nand_chip *chip,
 						  int busw,
 						  int *maf_id, int *dev_id,
-						  const struct nand_flash_dev *type)
+						  struct nand_flash_dev *type)
 {
-	const char *name;
 	int i, maf_idx;
 	u8 id_data[8];
 
@@ -2933,8 +3741,7 @@ static const struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 		id_data[i] = chip->read_byte(mtd);
 
 	if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
-		pr_info("%s: second ID read did not match "
-			"%02x,%02x against %02x,%02x\n", __func__,
+		pr_info("second ID read did not match %02x,%02x against %02x,%02x\n",
 			*maf_id, *dev_id, id_data[0], id_data[1]);
 		return ERR_PTR(-ENODEV);
 	}
@@ -2942,9 +3749,14 @@ static const struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 	if (!type)
 		type = nand_flash_ids;
 
-	for (; type->name != NULL; type++)
-		if (*dev_id == type->id)
-			break;
+	for (; type->name != NULL; type++) {
+		if (is_full_id_nand(type)) {
+			if (find_full_id_nand(mtd, chip, type, id_data, &busw))
+				goto ident_done;
+		} else if (*dev_id == type->dev_id) {
+				break;
+		}
+	}
 
 	chip->onfi_version = 0;
 	if (!type->name || !type->pagesize) {
@@ -2970,7 +3782,7 @@ static const struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 	} else {
 		nand_decode_id(mtd, chip, type, id_data, &busw);
 	}
-	/* Get chip options, preserve non chip based options */
+	/* Get chip options */
 	chip->options |= type->options;
 
 	/*
@@ -2987,15 +3799,19 @@ ident_done:
 			break;
 	}
 
-	/*
-	 * Check, if buswidth is correct. Hardware drivers should set
-	 * chip correct!
-	 */
-	if (busw != (chip->options & NAND_BUSWIDTH_16)) {
-		pr_info("NAND device: Manufacturer ID:"
-			" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
-			*dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
-		pr_warn("NAND bus width %d instead %d bit\n",
+	if (chip->options & NAND_BUSWIDTH_AUTO) {
+		WARN_ON(chip->options & NAND_BUSWIDTH_16);
+		chip->options |= busw;
+		nand_set_defaults(chip, busw);
+	} else if (busw != (chip->options & NAND_BUSWIDTH_16)) {
+		/*
+		 * Check, if buswidth is correct. Hardware drivers should set
+		 * chip correct!
+		 */
+		pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
+			*maf_id, *dev_id);
+		pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, mtd->name);
+		pr_warn("bus width %d instead %d bit\n",
 			   (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
 			   busw ? 16 : 8);
 		return ERR_PTR(-EINVAL);
@@ -3018,28 +3834,23 @@ ident_done:
 	}
 
 	chip->badblockbits = 8;
-
-	/* Check for AND chips with 4 page planes */
-	if (chip->options & NAND_4PAGE_ARRAY)
-		chip->erase_cmd = multi_erase_cmd;
-	else
-		chip->erase_cmd = single_erase_cmd;
+	chip->erase_cmd = single_erase_cmd;
 
 	/* Do not replace user supplied command function! */
 	if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
 		chip->cmdfunc = nand_command_lp;
 
-	name = type->name;
+	pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
+		*maf_id, *dev_id);
 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION
-	if (chip->onfi_version)
-		name = chip->onfi_params.model;
+	pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+		chip->onfi_version ? chip->onfi_params.model : type->name);
+#else
+	pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, type->name);
 #endif
-	pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s),"
-		" page size: %d, OOB size: %d\n",
-		*maf_id, *dev_id, nand_manuf_ids[maf_idx].name,
-		name,
+	pr_info("%dMiB, %s, page size: %d, OOB size: %d\n",
+		(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
 		mtd->writesize, mtd->oobsize);
-
 	return type;
 }
 
@@ -3055,11 +3866,11 @@ ident_done:
  * The mtd->owner field must be set to the module of the caller.
  */
 int nand_scan_ident(struct mtd_info *mtd, int maxchips,
-		    const struct nand_flash_dev *table)
+		    struct nand_flash_dev *table)
 {
 	int i, busw, nand_maf_id, nand_dev_id;
 	struct nand_chip *chip = mtd->priv;
-	const struct nand_flash_dev *type;
+	struct nand_flash_dev *type;
 
 	/* Get buswidth to select the correct functions */
 	busw = chip->options & NAND_BUSWIDTH_16;
@@ -3071,13 +3882,14 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 				&nand_maf_id, &nand_dev_id, table);
 
 	if (IS_ERR(type)) {
-#ifndef CONFIG_SYS_NAND_QUIET_TEST
-		pr_warn("No NAND device found\n");
-#endif
+		if (!(chip->options & NAND_SCAN_SILENT_NODEV))
+			pr_warn("No NAND device found\n");
 		chip->select_chip(mtd, -1);
 		return PTR_ERR(type);
 	}
 
+	chip->select_chip(mtd, -1);
+
 	/* Check for a chip array */
 	for (i = 1; i < maxchips; i++) {
 		chip->select_chip(mtd, i);
@@ -3087,13 +3899,14 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 		chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
 		/* Read manufacturer and device IDs */
 		if (nand_maf_id != chip->read_byte(mtd) ||
-		    nand_dev_id != chip->read_byte(mtd))
+		    nand_dev_id != chip->read_byte(mtd)) {
+			chip->select_chip(mtd, -1);
 			break;
+		}
+		chip->select_chip(mtd, -1);
 	}
-#ifdef DEBUG
 	if (i > 1)
-		pr_info("%d NAND chips detected\n", i);
-#endif
+		pr_info("%d chips detected\n", i);
 
 	/* Store the number of chips and calc total size for mtd */
 	chip->numchips = i;
@@ -3101,6 +3914,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 
 	return 0;
 }
+EXPORT_SYMBOL(nand_scan_ident);
 
 
 /**
@@ -3115,14 +3929,14 @@ int nand_scan_tail(struct mtd_info *mtd)
 {
 	int i;
 	struct nand_chip *chip = mtd->priv;
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
 
 	/* New bad blocks should be marked in OOB, flash-based BBT, or both */
 	BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
 			!(chip->bbt_options & NAND_BBT_USE_FLASH));
 
 	if (!(chip->options & NAND_OWN_BUFFERS))
-		chip->buffers = memalign(ARCH_DMA_MINALIGN,
-					 sizeof(*chip->buffers));
+		chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
 	if (!chip->buffers)
 		return -ENOMEM;
 
@@ -3132,94 +3946,91 @@ int nand_scan_tail(struct mtd_info *mtd)
 	/*
 	 * If no default placement scheme is given, select an appropriate one.
 	 */
-	if (!chip->ecc.layout && (chip->ecc.mode != NAND_ECC_SOFT_BCH)) {
+	if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
 		switch (mtd->oobsize) {
 		case 8:
-			chip->ecc.layout = &nand_oob_8;
+			ecc->layout = &nand_oob_8;
 			break;
 		case 16:
-			chip->ecc.layout = &nand_oob_16;
+			ecc->layout = &nand_oob_16;
 			break;
 		case 64:
-			chip->ecc.layout = &nand_oob_64;
+			ecc->layout = &nand_oob_64;
 			break;
 		case 128:
-			chip->ecc.layout = &nand_oob_128;
+			ecc->layout = &nand_oob_128;
 			break;
 		default:
 			pr_warn("No oob scheme defined for oobsize %d\n",
 				   mtd->oobsize);
+			BUG();
 		}
 	}
 
 	if (!chip->write_page)
 		chip->write_page = nand_write_page;
 
-	/* set for ONFI nand */
-	if (!chip->onfi_set_features)
-		chip->onfi_set_features = nand_onfi_set_features;
-	if (!chip->onfi_get_features)
-		chip->onfi_get_features = nand_onfi_get_features;
-
 	/*
 	 * Check ECC mode, default to software if 3byte/512byte hardware ECC is
 	 * selected and we have 256 byte pagesize fallback to software ECC
 	 */
 
-	switch (chip->ecc.mode) {
+	switch (ecc->mode) {
 	case NAND_ECC_HW_OOB_FIRST:
 		/* Similar to NAND_ECC_HW, but a separate read_page handle */
-		if (!chip->ecc.calculate || !chip->ecc.correct ||
-		     !chip->ecc.hwctl) {
+		if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
 			pr_warn("No ECC functions supplied; "
 				   "hardware ECC not possible\n");
 			BUG();
 		}
-		if (!chip->ecc.read_page)
-			chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+		if (!ecc->read_page)
+			ecc->read_page = nand_read_page_hwecc_oob_first;
 
 	case NAND_ECC_HW:
 		/* Use standard hwecc read page function? */
-		if (!chip->ecc.read_page)
-			chip->ecc.read_page = nand_read_page_hwecc;
-		if (!chip->ecc.write_page)
-			chip->ecc.write_page = nand_write_page_hwecc;
-		if (!chip->ecc.read_page_raw)
-			chip->ecc.read_page_raw = nand_read_page_raw;
-		if (!chip->ecc.write_page_raw)
-			chip->ecc.write_page_raw = nand_write_page_raw;
-		if (!chip->ecc.read_oob)
-			chip->ecc.read_oob = nand_read_oob_std;
-		if (!chip->ecc.write_oob)
-			chip->ecc.write_oob = nand_write_oob_std;
+		if (!ecc->read_page)
+			ecc->read_page = nand_read_page_hwecc;
+		if (!ecc->write_page)
+			ecc->write_page = nand_write_page_hwecc;
+		if (!ecc->read_page_raw)
+			ecc->read_page_raw = nand_read_page_raw;
+		if (!ecc->write_page_raw)
+			ecc->write_page_raw = nand_write_page_raw;
+		if (!ecc->read_oob)
+			ecc->read_oob = nand_read_oob_std;
+		if (!ecc->write_oob)
+			ecc->write_oob = nand_write_oob_std;
+		if (!ecc->read_subpage)
+			ecc->read_subpage = nand_read_subpage;
+		if (!ecc->write_subpage)
+			ecc->write_subpage = nand_write_subpage_hwecc;
 
 	case NAND_ECC_HW_SYNDROME:
-		if ((!chip->ecc.calculate || !chip->ecc.correct ||
-		     !chip->ecc.hwctl) &&
-		    (!chip->ecc.read_page ||
-		     chip->ecc.read_page == nand_read_page_hwecc ||
-		     !chip->ecc.write_page ||
-		     chip->ecc.write_page == nand_write_page_hwecc)) {
+		if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
+		    (!ecc->read_page ||
+		     ecc->read_page == nand_read_page_hwecc ||
+		     !ecc->write_page ||
+		     ecc->write_page == nand_write_page_hwecc)) {
 			pr_warn("No ECC functions supplied; "
 				   "hardware ECC not possible\n");
 			BUG();
 		}
 		/* Use standard syndrome read/write page function? */
-		if (!chip->ecc.read_page)
-			chip->ecc.read_page = nand_read_page_syndrome;
-		if (!chip->ecc.write_page)
-			chip->ecc.write_page = nand_write_page_syndrome;
-		if (!chip->ecc.read_page_raw)
-			chip->ecc.read_page_raw = nand_read_page_raw_syndrome;
-		if (!chip->ecc.write_page_raw)
-			chip->ecc.write_page_raw = nand_write_page_raw_syndrome;
-		if (!chip->ecc.read_oob)
-			chip->ecc.read_oob = nand_read_oob_syndrome;
-		if (!chip->ecc.write_oob)
-			chip->ecc.write_oob = nand_write_oob_syndrome;
-
-		if (mtd->writesize >= chip->ecc.size) {
-			if (!chip->ecc.strength) {
+		if (!ecc->read_page)
+			ecc->read_page = nand_read_page_syndrome;
+		if (!ecc->write_page)
+			ecc->write_page = nand_write_page_syndrome;
+		if (!ecc->read_page_raw)
+			ecc->read_page_raw = nand_read_page_raw_syndrome;
+		if (!ecc->write_page_raw)
+			ecc->write_page_raw = nand_write_page_raw_syndrome;
+		if (!ecc->read_oob)
+			ecc->read_oob = nand_read_oob_syndrome;
+		if (!ecc->write_oob)
+			ecc->write_oob = nand_write_oob_syndrome;
+
+		if (mtd->writesize >= ecc->size) {
+			if (!ecc->strength) {
 				pr_warn("Driver must set ecc.strength when using hardware ECC\n");
 				BUG();
 			}
@@ -3227,109 +4038,107 @@ int nand_scan_tail(struct mtd_info *mtd)
 		}
 		pr_warn("%d byte HW ECC not possible on "
 			   "%d byte page size, fallback to SW ECC\n",
-			   chip->ecc.size, mtd->writesize);
-		chip->ecc.mode = NAND_ECC_SOFT;
+			   ecc->size, mtd->writesize);
+		ecc->mode = NAND_ECC_SOFT;
 
 	case NAND_ECC_SOFT:
-		chip->ecc.calculate = nand_calculate_ecc;
-		chip->ecc.correct = nand_correct_data;
-		chip->ecc.read_page = nand_read_page_swecc;
-		chip->ecc.read_subpage = nand_read_subpage;
-		chip->ecc.write_page = nand_write_page_swecc;
-		chip->ecc.read_page_raw = nand_read_page_raw;
-		chip->ecc.write_page_raw = nand_write_page_raw;
-		chip->ecc.read_oob = nand_read_oob_std;
-		chip->ecc.write_oob = nand_write_oob_std;
-		if (!chip->ecc.size)
-			chip->ecc.size = 256;
-		chip->ecc.bytes = 3;
-		chip->ecc.strength = 1;
+		ecc->calculate = nand_calculate_ecc;
+		ecc->correct = nand_correct_data;
+		ecc->read_page = nand_read_page_swecc;
+		ecc->read_subpage = nand_read_subpage;
+		ecc->write_page = nand_write_page_swecc;
+		ecc->read_page_raw = nand_read_page_raw;
+		ecc->write_page_raw = nand_write_page_raw;
+		ecc->read_oob = nand_read_oob_std;
+		ecc->write_oob = nand_write_oob_std;
+		if (!ecc->size)
+			ecc->size = 256;
+		ecc->bytes = 3;
+		ecc->strength = 1;
 		break;
 
 	case NAND_ECC_SOFT_BCH:
 		if (!mtd_nand_has_bch()) {
 			pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
-			return -EINVAL;
+			BUG();
 		}
-		chip->ecc.calculate = nand_bch_calculate_ecc;
-		chip->ecc.correct = nand_bch_correct_data;
-		chip->ecc.read_page = nand_read_page_swecc;
-		chip->ecc.read_subpage = nand_read_subpage;
-		chip->ecc.write_page = nand_write_page_swecc;
-		chip->ecc.read_page_raw = nand_read_page_raw;
-		chip->ecc.write_page_raw = nand_write_page_raw;
-		chip->ecc.read_oob = nand_read_oob_std;
-		chip->ecc.write_oob = nand_write_oob_std;
+		ecc->calculate = nand_bch_calculate_ecc;
+		ecc->correct = nand_bch_correct_data;
+		ecc->read_page = nand_read_page_swecc;
+		ecc->read_subpage = nand_read_subpage;
+		ecc->write_page = nand_write_page_swecc;
+		ecc->read_page_raw = nand_read_page_raw;
+		ecc->write_page_raw = nand_write_page_raw;
+		ecc->read_oob = nand_read_oob_std;
+		ecc->write_oob = nand_write_oob_std;
 		/*
 		 * Board driver should supply ecc.size and ecc.bytes values to
 		 * select how many bits are correctable; see nand_bch_init()
 		 * for details. Otherwise, default to 4 bits for large page
 		 * devices.
 		 */
-		if (!chip->ecc.size && (mtd->oobsize >= 64)) {
-			chip->ecc.size = 512;
-			chip->ecc.bytes = 7;
+		if (!ecc->size && (mtd->oobsize >= 64)) {
+			ecc->size = 512;
+			ecc->bytes = 7;
 		}
-		chip->ecc.priv = nand_bch_init(mtd,
-					       chip->ecc.size,
-					       chip->ecc.bytes,
-					       &chip->ecc.layout);
-		if (!chip->ecc.priv)
+		ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
+					       &ecc->layout);
+		if (!ecc->priv) {
 			pr_warn("BCH ECC initialization failed!\n");
- 		chip->ecc.strength =
-			chip->ecc.bytes * 8 / fls(8 * chip->ecc.size);
+			BUG();
+		}
+		ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size);
 		break;
 
 	case NAND_ECC_NONE:
 		pr_warn("NAND_ECC_NONE selected by board driver. "
-			"This is not recommended !!\n");
-		chip->ecc.read_page = nand_read_page_raw;
-		chip->ecc.write_page = nand_write_page_raw;
-		chip->ecc.read_oob = nand_read_oob_std;
-		chip->ecc.read_page_raw = nand_read_page_raw;
-		chip->ecc.write_page_raw = nand_write_page_raw;
-		chip->ecc.write_oob = nand_write_oob_std;
-		chip->ecc.size = mtd->writesize;
-		chip->ecc.bytes = 0;
+			   "This is not recommended!\n");
+		ecc->read_page = nand_read_page_raw;
+		ecc->write_page = nand_write_page_raw;
+		ecc->read_oob = nand_read_oob_std;
+		ecc->read_page_raw = nand_read_page_raw;
+		ecc->write_page_raw = nand_write_page_raw;
+		ecc->write_oob = nand_write_oob_std;
+		ecc->size = mtd->writesize;
+		ecc->bytes = 0;
+		ecc->strength = 0;
 		break;
 
 	default:
-		pr_warn("Invalid NAND_ECC_MODE %d\n", chip->ecc.mode);
+		pr_warn("Invalid NAND_ECC_MODE %d\n", ecc->mode);
 		BUG();
 	}
 
 	/* For many systems, the standard OOB write also works for raw */
-	if (!chip->ecc.read_oob_raw)
-		chip->ecc.read_oob_raw = chip->ecc.read_oob;
-	if (!chip->ecc.write_oob_raw)
-		chip->ecc.write_oob_raw = chip->ecc.write_oob;
+	if (!ecc->read_oob_raw)
+		ecc->read_oob_raw = ecc->read_oob;
+	if (!ecc->write_oob_raw)
+		ecc->write_oob_raw = ecc->write_oob;
 
 	/*
 	 * The number of bytes available for a client to place data into
 	 * the out of band area.
 	 */
-	chip->ecc.layout->oobavail = 0;
-	for (i = 0; chip->ecc.layout->oobfree[i].length
-			&& i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++)
-		chip->ecc.layout->oobavail +=
-			chip->ecc.layout->oobfree[i].length;
-	mtd->oobavail = chip->ecc.layout->oobavail;
+	ecc->layout->oobavail = 0;
+	for (i = 0; ecc->layout->oobfree[i].length
+			&& i < ARRAY_SIZE(ecc->layout->oobfree); i++)
+		ecc->layout->oobavail += ecc->layout->oobfree[i].length;
+	mtd->oobavail = ecc->layout->oobavail;
 
 	/*
 	 * Set the number of read / write steps for one page depending on ECC
 	 * mode.
 	 */
-	chip->ecc.steps = mtd->writesize / chip->ecc.size;
-	if (chip->ecc.steps * chip->ecc.size != mtd->writesize) {
+	ecc->steps = mtd->writesize / ecc->size;
+	if (ecc->steps * ecc->size != mtd->writesize) {
 		pr_warn("Invalid ECC parameters\n");
 		BUG();
 	}
-	chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
+	ecc->total = ecc->steps * ecc->bytes;
 
 	/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
-	if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
-	    !(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
-		switch (chip->ecc.steps) {
+	if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
+		switch (ecc->steps) {
 		case 2:
 			mtd->subpage_sft = 1;
 			break;
@@ -3345,36 +4154,42 @@ int nand_scan_tail(struct mtd_info *mtd)
 	/* Initialize state */
 	chip->state = FL_READY;
 
-	/* De-select the device */
-	chip->select_chip(mtd, -1);
-
 	/* Invalidate the pagebuffer reference */
 	chip->pagebuf = -1;
 
 	/* Large page NAND with SOFT_ECC should support subpage reads */
-	if ((chip->ecc.mode == NAND_ECC_SOFT) && (chip->page_shift > 9))
+	if ((ecc->mode == NAND_ECC_SOFT) && (chip->page_shift > 9))
 		chip->options |= NAND_SUBPAGE_READ;
 
 	/* Fill in remaining MTD driver data */
-	mtd->type = MTD_NANDFLASH;
+	mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH;
 	mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
 						MTD_CAP_NANDFLASH;
 	mtd->_erase = nand_erase;
+#ifndef __UBOOT__
 	mtd->_point = NULL;
 	mtd->_unpoint = NULL;
+#endif
 	mtd->_read = nand_read;
 	mtd->_write = nand_write;
+	mtd->_panic_write = panic_nand_write;
 	mtd->_read_oob = nand_read_oob;
 	mtd->_write_oob = nand_write_oob;
 	mtd->_sync = nand_sync;
 	mtd->_lock = NULL;
 	mtd->_unlock = NULL;
+#ifndef __UBOOT__
+	mtd->_suspend = nand_suspend;
+	mtd->_resume = nand_resume;
+#endif
 	mtd->_block_isbad = nand_block_isbad;
 	mtd->_block_markbad = nand_block_markbad;
+	mtd->writebufsize = mtd->writesize;
 
 	/* propagate ecc info to mtd_info */
-	mtd->ecclayout = chip->ecc.layout;
-	mtd->ecc_strength = chip->ecc.strength;
+	mtd->ecclayout = ecc->layout;
+	mtd->ecc_strength = ecc->strength;
+	mtd->ecc_step_size = ecc->size;
 	/*
 	 * Initialize bitflip_threshold to its default prior scan_bbt() call.
 	 * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
@@ -3385,10 +4200,24 @@ int nand_scan_tail(struct mtd_info *mtd)
 
 	/* Check, if we should skip the bad block table scan */
 	if (chip->options & NAND_SKIP_BBTSCAN)
-		chip->options |= NAND_BBT_SCANNED;
+		return 0;
 
-	return 0;
+	/* Build bad block table */
+	return chip->scan_bbt(mtd);
 }
+EXPORT_SYMBOL(nand_scan_tail);
+
+/*
+ * is_module_text_address() isn't exported, and it's mostly a pointless
+ * test if this is a module _anyway_ -- they'd have to try _really_ hard
+ * to call us from in-kernel code if the core NAND support is modular.
+ */
+#ifdef MODULE
+#define caller_is_module() (1)
+#else
+#define caller_is_module() \
+	is_module_text_address((unsigned long)__builtin_return_address(0))
+#endif
 
 /**
  * nand_scan - [NAND Interface] Scan for the NAND device
@@ -3404,11 +4233,18 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
 {
 	int ret;
 
+	/* Many callers got this wrong, so check for it for a while... */
+	if (!mtd->owner && caller_is_module()) {
+		pr_crit("%s called with NULL mtd->owner!\n", __func__);
+		BUG();
+	}
+
 	ret = nand_scan_ident(mtd, maxchips, NULL);
 	if (!ret)
 		ret = nand_scan_tail(mtd);
 	return ret;
 }
+EXPORT_SYMBOL(nand_scan);
 
 /**
  * nand_release - [NAND Interface] Free resources held by the NAND device
@@ -3421,10 +4257,7 @@ void nand_release(struct mtd_info *mtd)
 	if (chip->ecc.mode == NAND_ECC_SOFT_BCH)
 		nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
 
-#ifdef CONFIG_MTD_PARTITIONS
-	/* Deregister partitions */
-	del_mtd_partitions(mtd);
-#endif
+	mtd_device_unregister(mtd);
 
 	/* Free bad block table memory */
 	kfree(chip->bbt);
@@ -3436,3 +4269,25 @@ void nand_release(struct mtd_info *mtd)
 			& NAND_BBT_DYNAMICSTRUCT)
 		kfree(chip->badblock_pattern);
 }
+EXPORT_SYMBOL_GPL(nand_release);
+
+#ifndef __UBOOT__
+static int __init nand_base_init(void)
+{
+	led_trigger_register_simple("nand-disk", &nand_led_trigger);
+	return 0;
+}
+
+static void __exit nand_base_exit(void)
+{
+	led_trigger_unregister_simple(nand_led_trigger);
+}
+#endif
+
+module_init(nand_base_init);
+module_exit(nand_base_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Steven J. Hill <sjhill at realitydiluted.com>");
+MODULE_AUTHOR("Thomas Gleixner <tglx at linutronix.de>");
+MODULE_DESCRIPTION("Generic NAND flash driver code");
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 8ef5845..c8f28c7 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -59,17 +59,55 @@
  *
  */
 
-#include <common.h>
-#include <malloc.h>
-#include <linux/compat.h>
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/slab.h>
+#include <linux/types.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/bbm.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <linux/string.h>
+#else
+#include <common.h>
+#include <malloc.h>
+#include <linux/compat.h>
+
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/bbm.h>
+ #include <linux/mtd/nand.h>
+ #include <linux/mtd/nand_ecc.h>
+ #include <linux/bitops.h>
+ #include <linux/string.h>
+#endif
+
+#define BBT_BLOCK_GOOD		0x00
+#define BBT_BLOCK_WORN		0x01
+#define BBT_BLOCK_RESERVED	0x02
+#define BBT_BLOCK_FACTORY_BAD	0x03
 
-#include <asm/errno.h>
+#define BBT_ENTRY_MASK		0x03
+#define BBT_ENTRY_SHIFT		2
+
+static int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
+
+static inline uint8_t bbt_get_entry(struct nand_chip *chip, int block)
+{
+	uint8_t entry = chip->bbt[block >> BBT_ENTRY_SHIFT];
+	entry >>= (block & BBT_ENTRY_MASK) * 2;
+	return entry & BBT_ENTRY_MASK;
+}
+
+static inline void bbt_mark_entry(struct nand_chip *chip, int block,
+		uint8_t mark)
+{
+	uint8_t msk = (mark & BBT_ENTRY_MASK) << ((block & BBT_ENTRY_MASK) * 2);
+	chip->bbt[block >> BBT_ENTRY_SHIFT] |= msk;
+}
 
 static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
 {
@@ -86,33 +124,17 @@ static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
  * @td: search pattern descriptor
  *
  * Check for a pattern at the given place. Used to search bad block tables and
- * good / bad block identifiers. If the SCAN_EMPTY option is set then check, if
- * all bytes except the pattern area contain 0xff.
+ * good / bad block identifiers.
  */
 static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
 {
-	int end = 0;
-	uint8_t *p = buf;
-
 	if (td->options & NAND_BBT_NO_OOB)
 		return check_pattern_no_oob(buf, td);
 
-	end = paglen + td->offs;
-	if (td->options & NAND_BBT_SCANEMPTY)
-		if (memchr_inv(p, 0xff, end))
-			return -1;
-	p += end;
-
 	/* Compare the pattern */
-	if (memcmp(p, td->pattern, td->len))
+	if (memcmp(buf + paglen + td->offs, td->pattern, td->len))
 		return -1;
 
-	if (td->options & NAND_BBT_SCANEMPTY) {
-		p += td->len;
-		end += td->len;
-		if (memchr_inv(p, 0xff, len - end))
-			return -1;
-	}
 	return 0;
 }
 
@@ -159,7 +181,7 @@ static u32 add_marker_len(struct nand_bbt_descr *td)
  * @page: the starting page
  * @num: the number of bbt descriptors to read
  * @td: the bbt describtion table
- * @offs: offset in the memory table
+ * @offs: block number offset in the table
  *
  * Read the bad block table starting from page.
  */
@@ -209,25 +231,33 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
 		/* Analyse data */
 		for (i = 0; i < len; i++) {
 			uint8_t dat = buf[i];
-			for (j = 0; j < 8; j += bits, act += 2) {
+			for (j = 0; j < 8; j += bits, act++) {
 				uint8_t tmp = (dat >> j) & msk;
 				if (tmp == msk)
 					continue;
 				if (reserved_block_code && (tmp == reserved_block_code)) {
 					pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
-						 (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
-					this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
+						 (loff_t)(offs + act) <<
+						 this->bbt_erase_shift);
+					bbt_mark_entry(this, offs + act,
+							BBT_BLOCK_RESERVED);
 					mtd->ecc_stats.bbtblocks++;
 					continue;
 				}
-				pr_info("nand_read_bbt: Bad block at 0x%012llx\n",
-					(loff_t)((offs << 2) + (act >> 1))
-					<< this->bbt_erase_shift);
+				/*
+				 * Leave it for now, if it's matured we can
+				 * move this message to pr_debug.
+				 */
+				pr_info("nand_read_bbt: bad block at 0x%012llx\n",
+					 (loff_t)(offs + act) <<
+					 this->bbt_erase_shift);
 				/* Factory marked bad or worn out? */
 				if (tmp == 0)
-					this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
+					bbt_mark_entry(this, offs + act,
+							BBT_BLOCK_FACTORY_BAD);
 				else
-					this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06);
+					bbt_mark_entry(this, offs + act,
+							BBT_BLOCK_WORN);
 				mtd->ecc_stats.badblocks++;
 			}
 		}
@@ -262,7 +292,7 @@ static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
 					td, offs);
 			if (res)
 				return res;
-			offs += this->chipsize >> (this->bbt_erase_shift + 2);
+			offs += this->chipsize >> this->bbt_erase_shift;
 		}
 	} else {
 		res = read_bbt(mtd, buf, td->pages[0],
@@ -396,25 +426,6 @@ static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
 	}
 }
 
-/* Scan a given block full */
-static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
-			   loff_t offs, uint8_t *buf, size_t readlen,
-			   int scanlen, int numpages)
-{
-	int ret, j;
-
-	ret = scan_read_oob(mtd, buf, offs, readlen);
-	/* Ignore ECC errors when checking for BBM */
-	if (ret && !mtd_is_bitflip_or_eccerr(ret))
-		return ret;
-
-	for (j = 0; j < numpages; j++, buf += scanlen) {
-		if (check_pattern(buf, scanlen, mtd->writesize, bd))
-			return 1;
-	}
-	return 0;
-}
-
 /* Scan a given block partially */
 static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
 			   loff_t offs, uint8_t *buf, int numpages)
@@ -461,36 +472,19 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
 	struct nand_bbt_descr *bd, int chip)
 {
 	struct nand_chip *this = mtd->priv;
-	int i, numblocks, numpages, scanlen;
+	int i, numblocks, numpages;
 	int startblock;
 	loff_t from;
-	size_t readlen;
 
 	pr_info("Scanning device for bad blocks\n");
 
-	if (bd->options & NAND_BBT_SCANALLPAGES)
-		numpages = 1 << (this->bbt_erase_shift - this->page_shift);
-	else if (bd->options & NAND_BBT_SCAN2NDPAGE)
+	if (bd->options & NAND_BBT_SCAN2NDPAGE)
 		numpages = 2;
 	else
 		numpages = 1;
 
-	if (!(bd->options & NAND_BBT_SCANEMPTY)) {
-		/* We need only read few bytes from the OOB area */
-		scanlen = 0;
-		readlen = bd->len;
-	} else {
-		/* Full page content should be read */
-		scanlen = mtd->writesize + mtd->oobsize;
-		readlen = numpages * mtd->writesize;
-	}
-
 	if (chip == -1) {
-		/*
-		 * Note that numblocks is 2 * (real numblocks) here, see i+=2
-		 * below as it makes shifting and masking less painful
-		 */
-		numblocks = mtd->size >> (this->bbt_erase_shift - 1);
+		numblocks = mtd->size >> this->bbt_erase_shift;
 		startblock = 0;
 		from = 0;
 	} else {
@@ -499,37 +493,31 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
 			       chip + 1, this->numchips);
 			return -EINVAL;
 		}
-		numblocks = this->chipsize >> (this->bbt_erase_shift - 1);
+		numblocks = this->chipsize >> this->bbt_erase_shift;
 		startblock = chip * numblocks;
 		numblocks += startblock;
-		from = (loff_t)startblock << (this->bbt_erase_shift - 1);
+		from = (loff_t)startblock << this->bbt_erase_shift;
 	}
 
 	if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
 		from += mtd->erasesize - (mtd->writesize * numpages);
 
-	for (i = startblock; i < numblocks;) {
+	for (i = startblock; i < numblocks; i++) {
 		int ret;
 
 		BUG_ON(bd->options & NAND_BBT_NO_OOB);
 
-		if (bd->options & NAND_BBT_SCANALLPAGES)
-			ret = scan_block_full(mtd, bd, from, buf, readlen,
-					      scanlen, numpages);
-		else
-			ret = scan_block_fast(mtd, bd, from, buf, numpages);
-
+		ret = scan_block_fast(mtd, bd, from, buf, numpages);
 		if (ret < 0)
 			return ret;
 
 		if (ret) {
-			this->bbt[i >> 3] |= 0x03 << (i & 0x6);
+			bbt_mark_entry(this, i, BBT_BLOCK_FACTORY_BAD);
 			pr_warn("Bad eraseblock %d at 0x%012llx\n",
-				  i >> 1, (unsigned long long)from);
+				i, (unsigned long long)from);
 			mtd->ecc_stats.badblocks++;
 		}
 
-		i += 2;
 		from += (1 << this->bbt_erase_shift);
 	}
 	return 0;
@@ -554,7 +542,11 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 {
 	struct nand_chip *this = mtd->priv;
 	int i, chips;
+#ifndef __UBOOT__
+	int bits, startblock, block, dir;
+#else
 	int startblock, block, dir;
+#endif
 	int scanlen = mtd->writesize + mtd->oobsize;
 	int bbtblocks;
 	int blocktopage = this->bbt_erase_shift - this->page_shift;
@@ -578,6 +570,11 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 		bbtblocks = mtd->size >> this->bbt_erase_shift;
 	}
 
+#ifndef __UBOOT__
+	/* Number of bits for each erase block in the bbt */
+	bits = td->options & NAND_BBT_NRBITS_MSK;
+#endif
+
 	for (i = 0; i < chips; i++) {
 		/* Reset version information */
 		td->version[i] = 0;
@@ -606,8 +603,8 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 		if (td->pages[i] == -1)
 			pr_warn("Bad block table not found for chip %d\n", i);
 		else
-			pr_info("Bad block table found at page %d, version 0x%02X\n", td->pages[i],
-				td->version[i]);
+			pr_info("Bad block table found at page %d, version "
+				 "0x%02X\n", td->pages[i], td->version[i]);
 	}
 	return 0;
 }
@@ -649,9 +646,9 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 {
 	struct nand_chip *this = mtd->priv;
 	struct erase_info einfo;
-	int i, j, res, chip = 0;
+	int i, res, chip = 0;
 	int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
-	int nrchips, bbtoffs, pageoffs, ooboffs;
+	int nrchips, pageoffs, ooboffs;
 	uint8_t msk[4];
 	uint8_t rcode = td->reserved_block_code;
 	size_t retlen, len = 0;
@@ -707,10 +704,9 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 		for (i = 0; i < td->maxblocks; i++) {
 			int block = startblock + dir * i;
 			/* Check, if the block is bad */
-			switch ((this->bbt[block >> 2] >>
-				 (2 * (block & 0x03))) & 0x03) {
-			case 0x01:
-			case 0x03:
+			switch (bbt_get_entry(this, block)) {
+			case BBT_BLOCK_WORN:
+			case BBT_BLOCK_FACTORY_BAD:
 				continue;
 			}
 			page = block <<
@@ -742,8 +738,6 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 		default: return -EINVAL;
 		}
 
-		bbtoffs = chip * (numblocks >> 2);
-
 		to = ((loff_t)page) << this->page_shift;
 
 		/* Must we save the block contents? */
@@ -808,16 +802,12 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 			buf[ooboffs + td->veroffs] = td->version[chip];
 
 		/* Walk through the memory table */
-		for (i = 0; i < numblocks;) {
+		for (i = 0; i < numblocks; i++) {
 			uint8_t dat;
-			dat = this->bbt[bbtoffs + (i >> 2)];
-			for (j = 0; j < 4; j++, i++) {
-				int sftcnt = (i << (3 - sft)) & sftmsk;
-				/* Do not store the reserved bbt blocks! */
-				buf[offs + (i >> sft)] &=
-					~(msk[dat & 0x03] << sftcnt);
-				dat >>= 2;
-			}
+			int sftcnt = (i << (3 - sft)) & sftmsk;
+			dat = bbt_get_entry(this, chip * numblocks + i);
+			/* Do not store the reserved bbt blocks! */
+			buf[offs + (i >> sft)] &= ~(msk[dat] << sftcnt);
 		}
 
 		memset(&einfo, 0, sizeof(einfo));
@@ -859,7 +849,6 @@ static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *b
 {
 	struct nand_chip *this = mtd->priv;
 
-	bd->options &= ~NAND_BBT_SCANEMPTY;
 	return create_bbt(mtd, this->buffers->databuf, bd, -1);
 }
 
@@ -1003,7 +992,7 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
 {
 	struct nand_chip *this = mtd->priv;
 	int i, j, chips, block, nrblocks, update;
-	uint8_t oldval, newval;
+	uint8_t oldval;
 
 	/* Do we have a bbt per chip? */
 	if (td->options & NAND_BBT_PERCHIP) {
@@ -1020,12 +1009,12 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
 			if (td->pages[i] == -1)
 				continue;
 			block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
-			block <<= 1;
-			oldval = this->bbt[(block >> 3)];
-			newval = oldval | (0x2 << (block & 0x06));
-			this->bbt[(block >> 3)] = newval;
-			if ((oldval != newval) && td->reserved_block_code)
-				nand_update_bbt(mtd, (loff_t)block << (this->bbt_erase_shift - 1));
+			oldval = bbt_get_entry(this, block);
+			bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
+			if ((oldval != BBT_BLOCK_RESERVED) &&
+					td->reserved_block_code)
+				nand_update_bbt(mtd, (loff_t)block <<
+						this->bbt_erase_shift);
 			continue;
 		}
 		update = 0;
@@ -1033,14 +1022,12 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
 			block = ((i + 1) * nrblocks) - td->maxblocks;
 		else
 			block = i * nrblocks;
-		block <<= 1;
 		for (j = 0; j < td->maxblocks; j++) {
-			oldval = this->bbt[(block >> 3)];
-			newval = oldval | (0x2 << (block & 0x06));
-			this->bbt[(block >> 3)] = newval;
-			if (oldval != newval)
+			oldval = bbt_get_entry(this, block);
+			bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
+			if (oldval != BBT_BLOCK_RESERVED)
 				update = 1;
-			block += 2;
+			block++;
 		}
 		/*
 		 * If we want reserved blocks to be recorded to flash, and some
@@ -1048,7 +1035,8 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
 		 * bbts.  This should only happen once.
 		 */
 		if (update && td->reserved_block_code)
-			nand_update_bbt(mtd, (loff_t)(block - 2) << (this->bbt_erase_shift - 1));
+			nand_update_bbt(mtd, (loff_t)(block - 1) <<
+					this->bbt_erase_shift);
 	}
 }
 
@@ -1174,13 +1162,13 @@ int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
 }
 
 /**
- * nand_update_bbt - [NAND Interface] update bad block table(s)
+ * nand_update_bbt - update bad block table(s)
  * @mtd: MTD device structure
  * @offs: the offset of the newly marked block
  *
  * The function updates the bad block table(s).
  */
-int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
+static int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
 {
 	struct nand_chip *this = mtd->priv;
 	int len, res = 0;
@@ -1234,15 +1222,6 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
  */
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
-static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
-
-static struct nand_bbt_descr agand_flashbased = {
-	.options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
-	.offs = 0x20,
-	.len = 6,
-	.pattern = scan_agand_pattern
-};
-
 /* Generic flash bbt descriptors */
 static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
 static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
@@ -1327,22 +1306,6 @@ int nand_default_bbt(struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
 
-	/*
-	 * Default for AG-AND. We must use a flash based bad block table as the
-	 * devices have factory marked _good_ blocks. Erasing those blocks
-	 * leads to loss of the good / bad information, so we _must_ store this
-	 * information in a good / bad table during startup.
-	 */
-	if (this->options & NAND_IS_AND) {
-		/* Use the default pattern descriptors */
-		if (!this->bbt_td) {
-			this->bbt_td = &bbt_main_descr;
-			this->bbt_md = &bbt_mirror_descr;
-		}
-		this->bbt_options |= NAND_BBT_USE_FLASH;
-		return nand_scan_bbt(mtd, &agand_flashbased);
-	}
-
 	/* Is a flash based bad block table requested? */
 	if (this->bbt_options & NAND_BBT_USE_FLASH) {
 		/* Use the default pattern descriptors */
@@ -1375,23 +1338,46 @@ int nand_default_bbt(struct mtd_info *mtd)
 int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
 {
 	struct nand_chip *this = mtd->priv;
-	int block;
-	uint8_t res;
+	int block, res;
 
-	/* Get block number * 2 */
-	block = (int)(offs >> (this->bbt_erase_shift - 1));
-	res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
+	block = (int)(offs >> this->bbt_erase_shift);
+	res = bbt_get_entry(this, block);
 
-	MTDDEBUG(MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
-	      (unsigned int)offs, block >> 1, res);
+	pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
+			"(block %d) 0x%02x\n",
+			(unsigned int)offs, block, res);
 
-	switch ((int)res) {
-	case 0x00:
+	switch (res) {
+	case BBT_BLOCK_GOOD:
 		return 0;
-	case 0x01:
+	case BBT_BLOCK_WORN:
 		return 1;
-	case 0x02:
+	case BBT_BLOCK_RESERVED:
 		return allowbbt ? 0 : 1;
 	}
 	return 1;
 }
+
+/**
+ * nand_markbad_bbt - [NAND Interface] Mark a block bad in the BBT
+ * @mtd: MTD device structure
+ * @offs: offset of the bad block
+ */
+int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
+{
+	struct nand_chip *this = mtd->priv;
+	int block, ret = 0;
+
+	block = (int)(offs >> this->bbt_erase_shift);
+
+	/* Mark bad block in memory */
+	bbt_mark_entry(this, block, BBT_BLOCK_WORN);
+
+	/* Update flash-based bad block table */
+	if (this->bbt_options & NAND_BBT_USE_FLASH)
+		ret = nand_update_bbt(mtd, offs);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(nand_scan_bbt);
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index f3f0cb6..3afb9ae 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -8,165 +8,162 @@
  * published by the Free Software Foundation.
  *
  */
-
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+#else
 #include <common.h>
 #include <linux/mtd/nand.h>
-/*
-*	Chip ID list
-*
-*	Name. ID code, pagesize, chipsize in MegaByte, eraseblock size,
-*	options
-*
-*	Pagesize; 0, 256, 512
-*	0	get this information from the extended chip ID
-+	256	256 Byte page size
-*	512	512 Byte page size
-*/
-const struct nand_flash_dev nand_flash_ids[] = {
-
-#ifdef CONFIG_MTD_NAND_MUSEUM_IDS
-	{"NAND 1MiB 5V 8-bit",		0x6e, 256, 1, 0x1000, 0},
-	{"NAND 2MiB 5V 8-bit",		0x64, 256, 2, 0x1000, 0},
-	{"NAND 4MiB 5V 8-bit",		0x6b, 512, 4, 0x2000, 0},
-	{"NAND 1MiB 3,3V 8-bit",	0xe8, 256, 1, 0x1000, 0},
-	{"NAND 1MiB 3,3V 8-bit",	0xec, 256, 1, 0x1000, 0},
-	{"NAND 2MiB 3,3V 8-bit",	0xea, 256, 2, 0x1000, 0},
-	{"NAND 4MiB 3,3V 8-bit", 	0xd5, 512, 4, 0x2000, 0},
-	{"NAND 4MiB 3,3V 8-bit",	0xe3, 512, 4, 0x2000, 0},
-	{"NAND 4MiB 3,3V 8-bit",	0xe5, 512, 4, 0x2000, 0},
-	{"NAND 8MiB 3,3V 8-bit",	0xd6, 512, 8, 0x2000, 0},
-
-	{"NAND 8MiB 1,8V 8-bit",	0x39, 512, 8, 0x2000, 0},
-	{"NAND 8MiB 3,3V 8-bit",	0xe6, 512, 8, 0x2000, 0},
-	{"NAND 8MiB 1,8V 16-bit",	0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
-	{"NAND 8MiB 3,3V 16-bit",	0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
 #endif
+#include <linux/sizes.h>
 
-	{"NAND 16MiB 1,8V 8-bit",	0x33, 512, 16, 0x4000, 0},
-	{"NAND 16MiB 3,3V 8-bit",	0x73, 512, 16, 0x4000, 0},
-	{"NAND 16MiB 1,8V 16-bit",	0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 16MiB 3,3V 16-bit",	0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-
-	{"NAND 32MiB 1,8V 8-bit",	0x35, 512, 32, 0x4000, 0},
-	{"NAND 32MiB 3,3V 8-bit",	0x75, 512, 32, 0x4000, 0},
-	{"NAND 32MiB 1,8V 16-bit",	0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 32MiB 3,3V 16-bit",	0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-
-	{"NAND 64MiB 1,8V 8-bit",	0x36, 512, 64, 0x4000, 0},
-	{"NAND 64MiB 3,3V 8-bit",	0x76, 512, 64, 0x4000, 0},
-	{"NAND 64MiB 1,8V 16-bit",	0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 64MiB 3,3V 16-bit",	0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+#define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS
+#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16)
 
-	{"NAND 128MiB 1,8V 8-bit",	0x78, 512, 128, 0x4000, 0},
-	{"NAND 128MiB 1,8V 8-bit",	0x39, 512, 128, 0x4000, 0},
-	{"NAND 128MiB 3,3V 8-bit",	0x79, 512, 128, 0x4000, 0},
-	{"NAND 128MiB 1,8V 16-bit",	0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 128MiB 1,8V 16-bit",	0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 128MiB 3,3V 16-bit",	0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 128MiB 3,3V 16-bit",	0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+#define SP_OPTIONS NAND_NEED_READRDY
+#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16)
 
-	{"NAND 256MiB 3,3V 8-bit",	0x71, 512, 256, 0x4000, 0},
+/*
+ * The chip ID list:
+ *    name, device ID, page size, chip size in MiB, eraseblock size, options
+ *
+ * If page size and eraseblock size are 0, the sizes are taken from the
+ * extended chip ID.
+ */
+struct nand_flash_dev nand_flash_ids[] = {
+	/*
+	 * Some incompatible NAND chips share device ID's and so must be
+	 * listed by full ID. We list them first so that we can easily identify
+	 * the most specific match.
+	 */
+	{"TC58NVG2S0F 4G 3.3V 8-bit",
+		{ .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} },
+		  SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) },
+	{"TC58NVG3S0F 8G 3.3V 8-bit",
+		{ .id = {0x98, 0xd3, 0x90, 0x26, 0x76, 0x15, 0x02, 0x08} },
+		  SZ_4K, SZ_1K, SZ_256K, 0, 8, 232, NAND_ECC_INFO(4, SZ_512) },
+	{"TC58NVG5D2 32G 3.3V 8-bit",
+		{ .id = {0x98, 0xd7, 0x94, 0x32, 0x76, 0x56, 0x09, 0x00} },
+		  SZ_8K, SZ_4K, SZ_1M, 0, 8, 640, NAND_ECC_INFO(40, SZ_1K) },
+	{"TC58NVG6D2 64G 3.3V 8-bit",
+		{ .id = {0x98, 0xde, 0x94, 0x82, 0x76, 0x56, 0x04, 0x20} },
+		  SZ_8K, SZ_8K, SZ_2M, 0, 8, 640, NAND_ECC_INFO(40, SZ_1K) },
+
+	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE5, 4, SZ_8K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 8MiB 3,3V 8-bit", 0xD6, 8, SZ_8K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 8MiB 3,3V 8-bit", 0xE6, 8, SZ_8K, SP_OPTIONS),
+
+	LEGACY_ID_NAND("NAND 16MiB 1,8V 8-bit",  0x33, 16, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 16MiB 3,3V 8-bit",  0x73, 16, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 16MiB 1,8V 16-bit", 0x43, 16, SZ_16K, SP_OPTIONS16),
+	LEGACY_ID_NAND("NAND 16MiB 3,3V 16-bit", 0x53, 16, SZ_16K, SP_OPTIONS16),
+
+	LEGACY_ID_NAND("NAND 32MiB 1,8V 8-bit",  0x35, 32, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 32MiB 3,3V 8-bit",  0x75, 32, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 32MiB 1,8V 16-bit", 0x45, 32, SZ_16K, SP_OPTIONS16),
+	LEGACY_ID_NAND("NAND 32MiB 3,3V 16-bit", 0x55, 32, SZ_16K, SP_OPTIONS16),
+
+	LEGACY_ID_NAND("NAND 64MiB 1,8V 8-bit",  0x36, 64, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 64MiB 3,3V 8-bit",  0x76, 64, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 64MiB 1,8V 16-bit", 0x46, 64, SZ_16K, SP_OPTIONS16),
+	LEGACY_ID_NAND("NAND 64MiB 3,3V 16-bit", 0x56, 64, SZ_16K, SP_OPTIONS16),
+
+	LEGACY_ID_NAND("NAND 128MiB 1,8V 8-bit",  0x78, 128, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 128MiB 1,8V 8-bit",  0x39, 128, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 128MiB 3,3V 8-bit",  0x79, 128, SZ_16K, SP_OPTIONS),
+	LEGACY_ID_NAND("NAND 128MiB 1,8V 16-bit", 0x72, 128, SZ_16K, SP_OPTIONS16),
+	LEGACY_ID_NAND("NAND 128MiB 1,8V 16-bit", 0x49, 128, SZ_16K, SP_OPTIONS16),
+	LEGACY_ID_NAND("NAND 128MiB 3,3V 16-bit", 0x74, 128, SZ_16K, SP_OPTIONS16),
+	LEGACY_ID_NAND("NAND 128MiB 3,3V 16-bit", 0x59, 128, SZ_16K, SP_OPTIONS16),
+
+	LEGACY_ID_NAND("NAND 256MiB 3,3V 8-bit", 0x71, 256, SZ_16K, SP_OPTIONS),
 
 	/*
-	 * These are the new chips with large page size. The pagesize and the
-	 * erasesize is determined from the extended id bytes
+	 * These are the new chips with large page size. Their page size and
+	 * eraseblock size are determined from the extended ID bytes.
 	 */
-#define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS
-#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16)
 
 	/* 512 Megabit */
-	{"NAND 64MiB 1,8V 8-bit",	0xA2, 0,  64, 0, LP_OPTIONS},
-	{"NAND 64MiB 1,8V 8-bit",	0xA0, 0,  64, 0, LP_OPTIONS},
-	{"NAND 64MiB 3,3V 8-bit",	0xF2, 0,  64, 0, LP_OPTIONS},
-	{"NAND 64MiB 3,3V 8-bit",	0xD0, 0,  64, 0, LP_OPTIONS},
-	{"NAND 64MiB 3,3V 8-bit",	0xF0, 0,  64, 0, LP_OPTIONS},
-	{"NAND 64MiB 1,8V 16-bit",	0xB2, 0,  64, 0, LP_OPTIONS16},
-	{"NAND 64MiB 1,8V 16-bit",	0xB0, 0,  64, 0, LP_OPTIONS16},
-	{"NAND 64MiB 3,3V 16-bit",	0xC2, 0,  64, 0, LP_OPTIONS16},
-	{"NAND 64MiB 3,3V 16-bit",	0xC0, 0,  64, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 64MiB 1,8V 8-bit",  0xA2,  64, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64MiB 1,8V 8-bit",  0xA0,  64, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64MiB 3,3V 8-bit",  0xF2,  64, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64MiB 3,3V 8-bit",  0xD0,  64, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64MiB 3,3V 8-bit",  0xF0,  64, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64MiB 1,8V 16-bit", 0xB2,  64, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 64MiB 1,8V 16-bit", 0xB0,  64, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 64MiB 3,3V 16-bit", 0xC2,  64, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 64MiB 3,3V 16-bit", 0xC0,  64, LP_OPTIONS16),
 
 	/* 1 Gigabit */
-	{"NAND 128MiB 1,8V 8-bit",	0xA1, 0, 128, 0, LP_OPTIONS},
-	{"NAND 128MiB 3,3V 8-bit",	0xF1, 0, 128, 0, LP_OPTIONS},
-	{"NAND 128MiB 3,3V 8-bit",	0xD1, 0, 128, 0, LP_OPTIONS},
-	{"NAND 128MiB 1,8V 16-bit",	0xB1, 0, 128, 0, LP_OPTIONS16},
-	{"NAND 128MiB 3,3V 16-bit",	0xC1, 0, 128, 0, LP_OPTIONS16},
-	{"NAND 128MiB 1,8V 16-bit",     0xAD, 0, 128, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 128MiB 1,8V 8-bit",  0xA1, 128, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 128MiB 3,3V 8-bit",  0xF1, 128, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 128MiB 3,3V 8-bit",  0xD1, 128, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 128MiB 1,8V 16-bit", 0xB1, 128, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 128MiB 3,3V 16-bit", 0xC1, 128, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 128MiB 1,8V 16-bit", 0xAD, 128, LP_OPTIONS16),
 
 	/* 2 Gigabit */
-	{"NAND 256MiB 1,8V 8-bit",	0xAA, 0, 256, 0, LP_OPTIONS},
-	{"NAND 256MiB 3,3V 8-bit",	0xDA, 0, 256, 0, LP_OPTIONS},
-	{"NAND 256MiB 1,8V 16-bit",	0xBA, 0, 256, 0, LP_OPTIONS16},
-	{"NAND 256MiB 3,3V 16-bit",	0xCA, 0, 256, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 256MiB 1,8V 8-bit",  0xAA, 256, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 256MiB 3,3V 8-bit",  0xDA, 256, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 256MiB 1,8V 16-bit", 0xBA, 256, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 256MiB 3,3V 16-bit", 0xCA, 256, LP_OPTIONS16),
 
 	/* 4 Gigabit */
-	{"NAND 512MiB 1,8V 8-bit",	0xAC, 0, 512, 0, LP_OPTIONS},
-	{"NAND 512MiB 3,3V 8-bit",	0xDC, 0, 512, 0, LP_OPTIONS},
-	{"NAND 512MiB 1,8V 16-bit",	0xBC, 0, 512, 0, LP_OPTIONS16},
-	{"NAND 512MiB 3,3V 16-bit",	0xCC, 0, 512, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 512MiB 1,8V 8-bit",  0xAC, 512, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 512MiB 3,3V 8-bit",  0xDC, 512, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 512MiB 1,8V 16-bit", 0xBC, 512, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 512MiB 3,3V 16-bit", 0xCC, 512, LP_OPTIONS16),
 
 	/* 8 Gigabit */
-	{"NAND 1GiB 1,8V 8-bit",	0xA3, 0, 1024, 0, LP_OPTIONS},
-	{"NAND 1GiB 3,3V 8-bit",	0xD3, 0, 1024, 0, LP_OPTIONS},
-	{"NAND 1GiB 1,8V 16-bit",	0xB3, 0, 1024, 0, LP_OPTIONS16},
-	{"NAND 1GiB 3,3V 16-bit",	0xC3, 0, 1024, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 1GiB 1,8V 8-bit",  0xA3, 1024, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 1GiB 3,3V 8-bit",  0xD3, 1024, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 1GiB 1,8V 16-bit", 0xB3, 1024, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 1GiB 3,3V 16-bit", 0xC3, 1024, LP_OPTIONS16),
 
 	/* 16 Gigabit */
-	{"NAND 2GiB 1,8V 8-bit",	0xA5, 0, 2048, 0, LP_OPTIONS},
-	{"NAND 2GiB 3,3V 8-bit",	0xD5, 0, 2048, 0, LP_OPTIONS},
-	{"NAND 2GiB 1,8V 16-bit",	0xB5, 0, 2048, 0, LP_OPTIONS16},
-	{"NAND 2GiB 3,3V 16-bit",	0xC5, 0, 2048, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 2GiB 1,8V 8-bit",  0xA5, 2048, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 2GiB 3,3V 8-bit",  0xD5, 2048, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 2GiB 1,8V 16-bit", 0xB5, 2048, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 2GiB 3,3V 16-bit", 0xC5, 2048, LP_OPTIONS16),
 
 	/* 32 Gigabit */
-	{"NAND 4GiB 1,8V 8-bit",	0xA7, 0, 4096, 0, LP_OPTIONS},
-	{"NAND 4GiB 3,3V 8-bit",	0xD7, 0, 4096, 0, LP_OPTIONS},
-	{"NAND 4GiB 1,8V 16-bit",	0xB7, 0, 4096, 0, LP_OPTIONS16},
-	{"NAND 4GiB 3,3V 16-bit",	0xC7, 0, 4096, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 4GiB 1,8V 8-bit",  0xA7, 4096, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 4GiB 3,3V 8-bit",  0xD7, 4096, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 4GiB 1,8V 16-bit", 0xB7, 4096, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 4GiB 3,3V 16-bit", 0xC7, 4096, LP_OPTIONS16),
 
 	/* 64 Gigabit */
-	{"NAND 8GiB 1,8V 8-bit",	0xAE, 0, 8192, 0, LP_OPTIONS},
-	{"NAND 8GiB 3,3V 8-bit",	0xDE, 0, 8192, 0, LP_OPTIONS},
-	{"NAND 8GiB 1,8V 16-bit",	0xBE, 0, 8192, 0, LP_OPTIONS16},
-	{"NAND 8GiB 3,3V 16-bit",	0xCE, 0, 8192, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 8GiB 1,8V 8-bit",  0xAE, 8192, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 8GiB 3,3V 8-bit",  0xDE, 8192, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 8GiB 1,8V 16-bit", 0xBE, 8192, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 8GiB 3,3V 16-bit", 0xCE, 8192, LP_OPTIONS16),
 
 	/* 128 Gigabit */
-	{"NAND 16GiB 1,8V 8-bit",	0x1A, 0, 16384, 0, LP_OPTIONS},
-	{"NAND 16GiB 3,3V 8-bit",	0x3A, 0, 16384, 0, LP_OPTIONS},
-	{"NAND 16GiB 1,8V 16-bit",	0x2A, 0, 16384, 0, LP_OPTIONS16},
-	{"NAND 16GiB 3,3V 16-bit",	0x4A, 0, 16384, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 16GiB 1,8V 8-bit",  0x1A, 16384, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 16GiB 3,3V 8-bit",  0x3A, 16384, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 16GiB 1,8V 16-bit", 0x2A, 16384, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 16GiB 3,3V 16-bit", 0x4A, 16384, LP_OPTIONS16),
 
 	/* 256 Gigabit */
-	{"NAND 32GiB 1,8V 8-bit",	0x1C, 0, 32768, 0, LP_OPTIONS},
-	{"NAND 32GiB 3,3V 8-bit",	0x3C, 0, 32768, 0, LP_OPTIONS},
-	{"NAND 32GiB 1,8V 16-bit",	0x2C, 0, 32768, 0, LP_OPTIONS16},
-	{"NAND 32GiB 3,3V 16-bit",	0x4C, 0, 32768, 0, LP_OPTIONS16},
+	EXTENDED_ID_NAND("NAND 32GiB 1,8V 8-bit",  0x1C, 32768, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 32GiB 3,3V 8-bit",  0x3C, 32768, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 32GiB 1,8V 16-bit", 0x2C, 32768, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 32GiB 3,3V 16-bit", 0x4C, 32768, LP_OPTIONS16),
 
 	/* 512 Gigabit */
-	{"NAND 64GiB 1,8V 8-bit",	0x1E, 0, 65536, 0, LP_OPTIONS},
-	{"NAND 64GiB 3,3V 8-bit",	0x3E, 0, 65536, 0, LP_OPTIONS},
-	{"NAND 64GiB 1,8V 16-bit",	0x2E, 0, 65536, 0, LP_OPTIONS16},
-	{"NAND 64GiB 3,3V 16-bit",	0x4E, 0, 65536, 0, LP_OPTIONS16},
-
-	/*
-	 * Renesas AND 1 Gigabit. Those chips do not support extended id and
-	 * have a strange page/block layout !  The chosen minimum erasesize is
-	 * 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page
-	 * planes 1 block = 2 pages, but due to plane arrangement the blocks
-	 * 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7 Anyway JFFS2 would
-	 * increase the eraseblock size so we chose a combined one which can be
-	 * erased in one go There are more speed improvements for reads and
-	 * writes possible, but not implemented now
-	 */
-	{"AND 128MiB 3,3V 8-bit",	0x01, 2048, 128, 0x4000,
-	 NAND_IS_AND | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH},
+	EXTENDED_ID_NAND("NAND 64GiB 1,8V 8-bit",  0x1E, 65536, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64GiB 3,3V 8-bit",  0x3E, 65536, LP_OPTIONS),
+	EXTENDED_ID_NAND("NAND 64GiB 1,8V 16-bit", 0x2E, 65536, LP_OPTIONS16),
+	EXTENDED_ID_NAND("NAND 64GiB 3,3V 16-bit", 0x4E, 65536, LP_OPTIONS16),
 
-	{NULL,}
+	{NULL}
 };
 
-/*
-*	Manufacturer ID list
-*/
-const struct nand_manufacturers nand_manuf_ids[] = {
+/* Manufacturer IDs */
+struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_TOSHIBA, "Toshiba"},
 	{NAND_MFR_SAMSUNG, "Samsung"},
 	{NAND_MFR_FUJITSU, "Fujitsu"},
@@ -178,5 +175,14 @@ const struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_AMD, "AMD/Spansion"},
 	{NAND_MFR_MACRONIX, "Macronix"},
 	{NAND_MFR_EON, "Eon"},
+	{NAND_MFR_SANDISK, "SanDisk"},
+	{NAND_MFR_INTEL, "Intel"},
 	{0x0, "Unknown"}
 };
+
+EXPORT_SYMBOL(nand_manuf_ids);
+EXPORT_SYMBOL(nand_flash_ids);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Gleixner <tglx at linutronix.de>");
+MODULE_DESCRIPTION("Nand device & manufacturer IDs");
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index b292826..024f6fb 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -187,6 +187,9 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 
 #ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
 
+#define NAND_CMD_LOCK_TIGHT     0x2c
+#define NAND_CMD_LOCK_STATUS    0x7a
+ 
 /******************************************************************************
  * Support for locking / unlocking operations of some NAND devices
  *****************************************************************************/
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 5510b13..2659595 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -118,6 +118,7 @@ static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len
 		out_be32((u32 *)(base + NDFC_DATA), *p++);
 }
 
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
 {
 	struct nand_chip *this = mtdinfo->priv;
@@ -130,6 +131,7 @@ static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len
 
 	return 0;
 }
+#endif
 
 /*
  * Read a byte from the NDFC.
@@ -205,7 +207,9 @@ int board_nand_init(struct nand_chip *nand)
 #endif
 
 	nand->write_buf  = ndfc_write_buf;
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
 	nand->verify_buf = ndfc_verify_buf;
+#endif
 	nand->read_byte = ndfc_read_byte;
 
 	chip++;
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index e33e8d3..03deabc 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -22,6 +22,7 @@
 #include <common.h>
 #include <linux/compat.h>
 #include <linux/mtd/mtd.h>
+#include "linux/mtd/flashchip.h"
 #include <linux/mtd/onenand.h>
 
 #include <asm/io.h>
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index 0267c2c..52509f1 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -140,7 +140,6 @@ static inline int onenand_memory_bbt(struct mtd_info *mtd,
 {
 	unsigned char data_buf[MAX_ONENAND_PAGESIZE];
 
-	bd->options &= ~NAND_BBT_SCANEMPTY;
 	return create_bbt(mtd, data_buf, bd, -1);
 }
 
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index df04c2b..5e56a29 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -15,20 +15,12 @@
 #include <linux/compat.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/onenand.h>
+#include <linux/mtd/flashchip.h>
 #include <linux/mtd/samsung_onenand.h>
 
 #include <asm/io.h>
 #include <asm/errno.h>
 
-#ifdef ONENAND_DEBUG
-#define DPRINTK(format, args...)					\
-do {									\
-	printf("%s[%d]: " format "\n", __func__, __LINE__, ##args);	\
-} while (0)
-#else
-#define DPRINTK(...)			do { } while (0)
-#endif
-
 #define ONENAND_ERASE_STATUS		0x00
 #define ONENAND_MULTI_ERASE_SET		0x01
 #define ONENAND_ERASE_START		0x03
diff --git a/drivers/mtd/ubi/Makefile b/drivers/mtd/ubi/Makefile
index 56c2823..e965566 100644
--- a/drivers/mtd/ubi/Makefile
+++ b/drivers/mtd/ubi/Makefile
@@ -5,6 +5,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y += build.o vtbl.o vmt.o upd.o kapi.o eba.o io.o wl.o scan.o crc32.o
+obj-y += attach.o build.o vtbl.o vmt.o upd.o kapi.o eba.o io.o wl.o crc32.o
+obj-y += fastmap.o
 obj-y += misc.o
 obj-y += debug.o
diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c
new file mode 100644
index 0000000..9fce02e
--- /dev/null
+++ b/drivers/mtd/ubi/attach.c
@@ -0,0 +1,1754 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Author: Artem Bityutskiy (Битюцкий Артём)
+ */
+
+/*
+ * UBI attaching sub-system.
+ *
+ * This sub-system is responsible for attaching MTD devices and it also
+ * implements flash media scanning.
+ *
+ * The attaching information is represented by a &struct ubi_attach_info'
+ * object. Information about volumes is represented by &struct ubi_ainf_volume
+ * objects which are kept in volume RB-tree with root at the @volumes field.
+ * The RB-tree is indexed by the volume ID.
+ *
+ * Logical eraseblocks are represented by &struct ubi_ainf_peb objects. These
+ * objects are kept in per-volume RB-trees with the root at the corresponding
+ * &struct ubi_ainf_volume object. To put it differently, we keep an RB-tree of
+ * per-volume objects and each of these objects is the root of RB-tree of
+ * per-LEB objects.
+ *
+ * Corrupted physical eraseblocks are put to the @corr list, free physical
+ * eraseblocks are put to the @free list and the physical eraseblock to be
+ * erased are put to the @erase list.
+ *
+ * About corruptions
+ * ~~~~~~~~~~~~~~~~~
+ *
+ * UBI protects EC and VID headers with CRC-32 checksums, so it can detect
+ * whether the headers are corrupted or not. Sometimes UBI also protects the
+ * data with CRC-32, e.g., when it executes the atomic LEB change operation, or
+ * when it moves the contents of a PEB for wear-leveling purposes.
+ *
+ * UBI tries to distinguish between 2 types of corruptions.
+ *
+ * 1. Corruptions caused by power cuts. These are expected corruptions and UBI
+ * tries to handle them gracefully, without printing too many warnings and
+ * error messages. The idea is that we do not lose important data in these
+ * cases - we may lose only the data which were being written to the media just
+ * before the power cut happened, and the upper layers (e.g., UBIFS) are
+ * supposed to handle such data losses (e.g., by using the FS journal).
+ *
+ * When UBI detects a corruption (CRC-32 mismatch) in a PEB, and it looks like
+ * the reason is a power cut, UBI puts this PEB to the @erase list, and all
+ * PEBs in the @erase list are scheduled for erasure later.
+ *
+ * 2. Unexpected corruptions which are not caused by power cuts. During
+ * attaching, such PEBs are put to the @corr list and UBI preserves them.
+ * Obviously, this lessens the amount of available PEBs, and if at some  point
+ * UBI runs out of free PEBs, it switches to R/O mode. UBI also loudly informs
+ * about such PEBs every time the MTD device is attached.
+ *
+ * However, it is difficult to reliably distinguish between these types of
+ * corruptions and UBI's strategy is as follows (in case of attaching by
+ * scanning). UBI assumes corruption type 2 if the VID header is corrupted and
+ * the data area does not contain all 0xFFs, and there were no bit-flips or
+ * integrity errors (e.g., ECC errors in case of NAND) while reading the data
+ * area.  Otherwise UBI assumes corruption type 1. So the decision criteria
+ * are as follows.
+ *   o If the data area contains only 0xFFs, there are no data, and it is safe
+ *     to just erase this PEB - this is corruption type 1.
+ *   o If the data area has bit-flips or data integrity errors (ECC errors on
+ *     NAND), it is probably a PEB which was being erased when power cut
+ *     happened, so this is corruption type 1. However, this is just a guess,
+ *     which might be wrong.
+ *   o Otherwise this is corruption type 2.
+ */
+
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/crc32.h>
+#include <linux/random.h>
+#else
+#include <div64.h>
+#include <linux/err.h>
+#endif
+
+#include <linux/math64.h>
+
+#include <ubi_uboot.h>
+#include "ubi.h"
+
+static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai);
+
+/* Temporary variables used during scanning */
+static struct ubi_ec_hdr *ech;
+static struct ubi_vid_hdr *vidh;
+
+/**
+ * add_to_list - add physical eraseblock to a list.
+ * @ai: attaching information
+ * @pnum: physical eraseblock number to add
+ * @vol_id: the last used volume id for the PEB
+ * @lnum: the last used LEB number for the PEB
+ * @ec: erase counter of the physical eraseblock
+ * @to_head: if not zero, add to the head of the list
+ * @list: the list to add to
+ *
+ * This function allocates a 'struct ubi_ainf_peb' object for physical
+ * eraseblock @pnum and adds it to the "free", "erase", or "alien" lists.
+ * It stores the @lnum and @vol_id alongside, which can both be
+ * %UBI_UNKNOWN if they are not available, not readable, or not assigned.
+ * If @to_head is not zero, PEB will be added to the head of the list, which
+ * basically means it will be processed first later. E.g., we add corrupted
+ * PEBs (corrupted due to power cuts) to the head of the erase list to make
+ * sure we erase them first and get rid of corruptions ASAP. This function
+ * returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+static int add_to_list(struct ubi_attach_info *ai, int pnum, int vol_id,
+		       int lnum, int ec, int to_head, struct list_head *list)
+{
+	struct ubi_ainf_peb *aeb;
+
+	if (list == &ai->free) {
+		dbg_bld("add to free: PEB %d, EC %d", pnum, ec);
+	} else if (list == &ai->erase) {
+		dbg_bld("add to erase: PEB %d, EC %d", pnum, ec);
+	} else if (list == &ai->alien) {
+		dbg_bld("add to alien: PEB %d, EC %d", pnum, ec);
+		ai->alien_peb_count += 1;
+	} else
+		BUG();
+
+	aeb = kmem_cache_alloc(ai->aeb_slab_cache, GFP_KERNEL);
+	if (!aeb)
+		return -ENOMEM;
+
+	aeb->pnum = pnum;
+	aeb->vol_id = vol_id;
+	aeb->lnum = lnum;
+	aeb->ec = ec;
+	if (to_head)
+		list_add(&aeb->u.list, list);
+	else
+		list_add_tail(&aeb->u.list, list);
+	return 0;
+}
+
+/**
+ * add_corrupted - add a corrupted physical eraseblock.
+ * @ai: attaching information
+ * @pnum: physical eraseblock number to add
+ * @ec: erase counter of the physical eraseblock
+ *
+ * This function allocates a 'struct ubi_ainf_peb' object for a corrupted
+ * physical eraseblock @pnum and adds it to the 'corr' list.  The corruption
+ * was presumably not caused by a power cut. Returns zero in case of success
+ * and a negative error code in case of failure.
+ */
+static int add_corrupted(struct ubi_attach_info *ai, int pnum, int ec)
+{
+	struct ubi_ainf_peb *aeb;
+
+	dbg_bld("add to corrupted: PEB %d, EC %d", pnum, ec);
+
+	aeb = kmem_cache_alloc(ai->aeb_slab_cache, GFP_KERNEL);
+	if (!aeb)
+		return -ENOMEM;
+
+	ai->corr_peb_count += 1;
+	aeb->pnum = pnum;
+	aeb->ec = ec;
+	list_add(&aeb->u.list, &ai->corr);
+	return 0;
+}
+
+/**
+ * validate_vid_hdr - check volume identifier header.
+ * @vid_hdr: the volume identifier header to check
+ * @av: information about the volume this logical eraseblock belongs to
+ * @pnum: physical eraseblock number the VID header came from
+ *
+ * This function checks that data stored in @vid_hdr is consistent. Returns
+ * non-zero if an inconsistency was found and zero if not.
+ *
+ * Note, UBI does sanity check of everything it reads from the flash media.
+ * Most of the checks are done in the I/O sub-system. Here we check that the
+ * information in the VID header is consistent to the information in other VID
+ * headers of the same volume.
+ */
+static int validate_vid_hdr(const struct ubi_vid_hdr *vid_hdr,
+			    const struct ubi_ainf_volume *av, int pnum)
+{
+	int vol_type = vid_hdr->vol_type;
+	int vol_id = be32_to_cpu(vid_hdr->vol_id);
+	int used_ebs = be32_to_cpu(vid_hdr->used_ebs);
+	int data_pad = be32_to_cpu(vid_hdr->data_pad);
+
+	if (av->leb_count != 0) {
+		int av_vol_type;
+
+		/*
+		 * This is not the first logical eraseblock belonging to this
+		 * volume. Ensure that the data in its VID header is consistent
+		 * to the data in previous logical eraseblock headers.
+		 */
+
+		if (vol_id != av->vol_id) {
+			ubi_err("inconsistent vol_id");
+			goto bad;
+		}
+
+		if (av->vol_type == UBI_STATIC_VOLUME)
+			av_vol_type = UBI_VID_STATIC;
+		else
+			av_vol_type = UBI_VID_DYNAMIC;
+
+		if (vol_type != av_vol_type) {
+			ubi_err("inconsistent vol_type");
+			goto bad;
+		}
+
+		if (used_ebs != av->used_ebs) {
+			ubi_err("inconsistent used_ebs");
+			goto bad;
+		}
+
+		if (data_pad != av->data_pad) {
+			ubi_err("inconsistent data_pad");
+			goto bad;
+		}
+	}
+
+	return 0;
+
+bad:
+	ubi_err("inconsistent VID header at PEB %d", pnum);
+	ubi_dump_vid_hdr(vid_hdr);
+	ubi_dump_av(av);
+	return -EINVAL;
+}
+
+/**
+ * add_volume - add volume to the attaching information.
+ * @ai: attaching information
+ * @vol_id: ID of the volume to add
+ * @pnum: physical eraseblock number
+ * @vid_hdr: volume identifier header
+ *
+ * If the volume corresponding to the @vid_hdr logical eraseblock is already
+ * present in the attaching information, this function does nothing. Otherwise
+ * it adds corresponding volume to the attaching information. Returns a pointer
+ * to the allocated "av" object in case of success and a negative error code in
+ * case of failure.
+ */
+static struct ubi_ainf_volume *add_volume(struct ubi_attach_info *ai,
+					  int vol_id, int pnum,
+					  const struct ubi_vid_hdr *vid_hdr)
+{
+	struct ubi_ainf_volume *av;
+	struct rb_node **p = &ai->volumes.rb_node, *parent = NULL;
+
+	ubi_assert(vol_id == be32_to_cpu(vid_hdr->vol_id));
+
+	/* Walk the volume RB-tree to look if this volume is already present */
+	while (*p) {
+		parent = *p;
+		av = rb_entry(parent, struct ubi_ainf_volume, rb);
+
+		if (vol_id == av->vol_id)
+			return av;
+
+		if (vol_id > av->vol_id)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	/* The volume is absent - add it */
+	av = kmalloc(sizeof(struct ubi_ainf_volume), GFP_KERNEL);
+	if (!av)
+		return ERR_PTR(-ENOMEM);
+
+	av->highest_lnum = av->leb_count = 0;
+	av->vol_id = vol_id;
+	av->root = RB_ROOT;
+	av->used_ebs = be32_to_cpu(vid_hdr->used_ebs);
+	av->data_pad = be32_to_cpu(vid_hdr->data_pad);
+	av->compat = vid_hdr->compat;
+	av->vol_type = vid_hdr->vol_type == UBI_VID_DYNAMIC ? UBI_DYNAMIC_VOLUME
+							    : UBI_STATIC_VOLUME;
+	if (vol_id > ai->highest_vol_id)
+		ai->highest_vol_id = vol_id;
+
+	rb_link_node(&av->rb, parent, p);
+	rb_insert_color(&av->rb, &ai->volumes);
+	ai->vols_found += 1;
+	dbg_bld("added volume %d", vol_id);
+	return av;
+}
+
+/**
+ * ubi_compare_lebs - find out which logical eraseblock is newer.
+ * @ubi: UBI device description object
+ * @aeb: first logical eraseblock to compare
+ * @pnum: physical eraseblock number of the second logical eraseblock to
+ * compare
+ * @vid_hdr: volume identifier header of the second logical eraseblock
+ *
+ * This function compares 2 copies of a LEB and informs which one is newer. In
+ * case of success this function returns a positive value, in case of failure, a
+ * negative error code is returned. The success return codes use the following
+ * bits:
+ *     o bit 0 is cleared: the first PEB (described by @aeb) is newer than the
+ *       second PEB (described by @pnum and @vid_hdr);
+ *     o bit 0 is set: the second PEB is newer;
+ *     o bit 1 is cleared: no bit-flips were detected in the newer LEB;
+ *     o bit 1 is set: bit-flips were detected in the newer LEB;
+ *     o bit 2 is cleared: the older LEB is not corrupted;
+ *     o bit 2 is set: the older LEB is corrupted.
+ */
+int ubi_compare_lebs(struct ubi_device *ubi, const struct ubi_ainf_peb *aeb,
+			int pnum, const struct ubi_vid_hdr *vid_hdr)
+{
+	int len, err, second_is_newer, bitflips = 0, corrupted = 0;
+	uint32_t data_crc, crc;
+	struct ubi_vid_hdr *vh = NULL;
+	unsigned long long sqnum2 = be64_to_cpu(vid_hdr->sqnum);
+
+	if (sqnum2 == aeb->sqnum) {
+		/*
+		 * This must be a really ancient UBI image which has been
+		 * created before sequence numbers support has been added. At
+		 * that times we used 32-bit LEB versions stored in logical
+		 * eraseblocks. That was before UBI got into mainline. We do not
+		 * support these images anymore. Well, those images still work,
+		 * but only if no unclean reboots happened.
+		 */
+		ubi_err("unsupported on-flash UBI format");
+		return -EINVAL;
+	}
+
+	/* Obviously the LEB with lower sequence counter is older */
+	second_is_newer = (sqnum2 > aeb->sqnum);
+
+	/*
+	 * Now we know which copy is newer. If the copy flag of the PEB with
+	 * newer version is not set, then we just return, otherwise we have to
+	 * check data CRC. For the second PEB we already have the VID header,
+	 * for the first one - we'll need to re-read it from flash.
+	 *
+	 * Note: this may be optimized so that we wouldn't read twice.
+	 */
+
+	if (second_is_newer) {
+		if (!vid_hdr->copy_flag) {
+			/* It is not a copy, so it is newer */
+			dbg_bld("second PEB %d is newer, copy_flag is unset",
+				pnum);
+			return 1;
+		}
+	} else {
+		if (!aeb->copy_flag) {
+			/* It is not a copy, so it is newer */
+			dbg_bld("first PEB %d is newer, copy_flag is unset",
+				pnum);
+			return bitflips << 1;
+		}
+
+		vh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+		if (!vh)
+			return -ENOMEM;
+
+		pnum = aeb->pnum;
+		err = ubi_io_read_vid_hdr(ubi, pnum, vh, 0);
+		if (err) {
+			if (err == UBI_IO_BITFLIPS)
+				bitflips = 1;
+			else {
+				ubi_err("VID of PEB %d header is bad, but it was OK earlier, err %d",
+					pnum, err);
+				if (err > 0)
+					err = -EIO;
+
+				goto out_free_vidh;
+			}
+		}
+
+		vid_hdr = vh;
+	}
+
+	/* Read the data of the copy and check the CRC */
+
+	len = be32_to_cpu(vid_hdr->data_size);
+
+	mutex_lock(&ubi->buf_mutex);
+	err = ubi_io_read_data(ubi, ubi->peb_buf, pnum, 0, len);
+	if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
+		goto out_unlock;
+
+	data_crc = be32_to_cpu(vid_hdr->data_crc);
+	crc = crc32(UBI_CRC32_INIT, ubi->peb_buf, len);
+	if (crc != data_crc) {
+		dbg_bld("PEB %d CRC error: calculated %#08x, must be %#08x",
+			pnum, crc, data_crc);
+		corrupted = 1;
+		bitflips = 0;
+		second_is_newer = !second_is_newer;
+	} else {
+		dbg_bld("PEB %d CRC is OK", pnum);
+		bitflips = !!err;
+	}
+	mutex_unlock(&ubi->buf_mutex);
+
+	ubi_free_vid_hdr(ubi, vh);
+
+	if (second_is_newer)
+		dbg_bld("second PEB %d is newer, copy_flag is set", pnum);
+	else
+		dbg_bld("first PEB %d is newer, copy_flag is set", pnum);
+
+	return second_is_newer | (bitflips << 1) | (corrupted << 2);
+
+out_unlock:
+	mutex_unlock(&ubi->buf_mutex);
+out_free_vidh:
+	ubi_free_vid_hdr(ubi, vh);
+	return err;
+}
+
+/**
+ * ubi_add_to_av - add used physical eraseblock to the attaching information.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ * @pnum: the physical eraseblock number
+ * @ec: erase counter
+ * @vid_hdr: the volume identifier header
+ * @bitflips: if bit-flips were detected when this physical eraseblock was read
+ *
+ * This function adds information about a used physical eraseblock to the
+ * 'used' tree of the corresponding volume. The function is rather complex
+ * because it has to handle cases when this is not the first physical
+ * eraseblock belonging to the same logical eraseblock, and the newer one has
+ * to be picked, while the older one has to be dropped. This function returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
+		  int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips)
+{
+	int err, vol_id, lnum;
+	unsigned long long sqnum;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb;
+	struct rb_node **p, *parent = NULL;
+
+	vol_id = be32_to_cpu(vid_hdr->vol_id);
+	lnum = be32_to_cpu(vid_hdr->lnum);
+	sqnum = be64_to_cpu(vid_hdr->sqnum);
+
+	dbg_bld("PEB %d, LEB %d:%d, EC %d, sqnum %llu, bitflips %d",
+		pnum, vol_id, lnum, ec, sqnum, bitflips);
+
+	av = add_volume(ai, vol_id, pnum, vid_hdr);
+	if (IS_ERR(av))
+		return PTR_ERR(av);
+
+	if (ai->max_sqnum < sqnum)
+		ai->max_sqnum = sqnum;
+
+	/*
+	 * Walk the RB-tree of logical eraseblocks of volume @vol_id to look
+	 * if this is the first instance of this logical eraseblock or not.
+	 */
+	p = &av->root.rb_node;
+	while (*p) {
+		int cmp_res;
+
+		parent = *p;
+		aeb = rb_entry(parent, struct ubi_ainf_peb, u.rb);
+		if (lnum != aeb->lnum) {
+			if (lnum < aeb->lnum)
+				p = &(*p)->rb_left;
+			else
+				p = &(*p)->rb_right;
+			continue;
+		}
+
+		/*
+		 * There is already a physical eraseblock describing the same
+		 * logical eraseblock present.
+		 */
+
+		dbg_bld("this LEB already exists: PEB %d, sqnum %llu, EC %d",
+			aeb->pnum, aeb->sqnum, aeb->ec);
+
+		/*
+		 * Make sure that the logical eraseblocks have different
+		 * sequence numbers. Otherwise the image is bad.
+		 *
+		 * However, if the sequence number is zero, we assume it must
+		 * be an ancient UBI image from the era when UBI did not have
+		 * sequence numbers. We still can attach these images, unless
+		 * there is a need to distinguish between old and new
+		 * eraseblocks, in which case we'll refuse the image in
+		 * 'ubi_compare_lebs()'. In other words, we attach old clean
+		 * images, but refuse attaching old images with duplicated
+		 * logical eraseblocks because there was an unclean reboot.
+		 */
+		if (aeb->sqnum == sqnum && sqnum != 0) {
+			ubi_err("two LEBs with same sequence number %llu",
+				sqnum);
+			ubi_dump_aeb(aeb, 0);
+			ubi_dump_vid_hdr(vid_hdr);
+			return -EINVAL;
+		}
+
+		/*
+		 * Now we have to drop the older one and preserve the newer
+		 * one.
+		 */
+		cmp_res = ubi_compare_lebs(ubi, aeb, pnum, vid_hdr);
+		if (cmp_res < 0)
+			return cmp_res;
+
+		if (cmp_res & 1) {
+			/*
+			 * This logical eraseblock is newer than the one
+			 * found earlier.
+			 */
+			err = validate_vid_hdr(vid_hdr, av, pnum);
+			if (err)
+				return err;
+
+			err = add_to_list(ai, aeb->pnum, aeb->vol_id,
+					  aeb->lnum, aeb->ec, cmp_res & 4,
+					  &ai->erase);
+			if (err)
+				return err;
+
+			aeb->ec = ec;
+			aeb->pnum = pnum;
+			aeb->vol_id = vol_id;
+			aeb->lnum = lnum;
+			aeb->scrub = ((cmp_res & 2) || bitflips);
+			aeb->copy_flag = vid_hdr->copy_flag;
+			aeb->sqnum = sqnum;
+
+			if (av->highest_lnum == lnum)
+				av->last_data_size =
+					be32_to_cpu(vid_hdr->data_size);
+
+			return 0;
+		} else {
+			/*
+			 * This logical eraseblock is older than the one found
+			 * previously.
+			 */
+			return add_to_list(ai, pnum, vol_id, lnum, ec,
+					   cmp_res & 4, &ai->erase);
+		}
+	}
+
+	/*
+	 * We've met this logical eraseblock for the first time, add it to the
+	 * attaching information.
+	 */
+
+	err = validate_vid_hdr(vid_hdr, av, pnum);
+	if (err)
+		return err;
+
+	aeb = kmem_cache_alloc(ai->aeb_slab_cache, GFP_KERNEL);
+	if (!aeb)
+		return -ENOMEM;
+
+	aeb->ec = ec;
+	aeb->pnum = pnum;
+	aeb->vol_id = vol_id;
+	aeb->lnum = lnum;
+	aeb->scrub = bitflips;
+	aeb->copy_flag = vid_hdr->copy_flag;
+	aeb->sqnum = sqnum;
+
+	if (av->highest_lnum <= lnum) {
+		av->highest_lnum = lnum;
+		av->last_data_size = be32_to_cpu(vid_hdr->data_size);
+	}
+
+	av->leb_count += 1;
+	rb_link_node(&aeb->u.rb, parent, p);
+	rb_insert_color(&aeb->u.rb, &av->root);
+	return 0;
+}
+
+/**
+ * ubi_find_av - find volume in the attaching information.
+ * @ai: attaching information
+ * @vol_id: the requested volume ID
+ *
+ * This function returns a pointer to the volume description or %NULL if there
+ * are no data about this volume in the attaching information.
+ */
+struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai,
+				    int vol_id)
+{
+	struct ubi_ainf_volume *av;
+	struct rb_node *p = ai->volumes.rb_node;
+
+	while (p) {
+		av = rb_entry(p, struct ubi_ainf_volume, rb);
+
+		if (vol_id == av->vol_id)
+			return av;
+
+		if (vol_id > av->vol_id)
+			p = p->rb_left;
+		else
+			p = p->rb_right;
+	}
+
+	return NULL;
+}
+
+/**
+ * ubi_remove_av - delete attaching information about a volume.
+ * @ai: attaching information
+ * @av: the volume attaching information to delete
+ */
+void ubi_remove_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av)
+{
+	struct rb_node *rb;
+	struct ubi_ainf_peb *aeb;
+
+	dbg_bld("remove attaching information about volume %d", av->vol_id);
+
+	while ((rb = rb_first(&av->root))) {
+		aeb = rb_entry(rb, struct ubi_ainf_peb, u.rb);
+		rb_erase(&aeb->u.rb, &av->root);
+		list_add_tail(&aeb->u.list, &ai->erase);
+	}
+
+	rb_erase(&av->rb, &ai->volumes);
+	kfree(av);
+	ai->vols_found -= 1;
+}
+
+/**
+ * early_erase_peb - erase a physical eraseblock.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ * @pnum: physical eraseblock number to erase;
+ * @ec: erase counter value to write (%UBI_UNKNOWN if it is unknown)
+ *
+ * This function erases physical eraseblock 'pnum', and writes the erase
+ * counter header to it. This function should only be used on UBI device
+ * initialization stages, when the EBA sub-system had not been yet initialized.
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int early_erase_peb(struct ubi_device *ubi,
+			   const struct ubi_attach_info *ai, int pnum, int ec)
+{
+	int err;
+	struct ubi_ec_hdr *ec_hdr;
+
+	if ((long long)ec >= UBI_MAX_ERASECOUNTER) {
+		/*
+		 * Erase counter overflow. Upgrade UBI and use 64-bit
+		 * erase counters internally.
+		 */
+		ubi_err("erase counter overflow at PEB %d, EC %d", pnum, ec);
+		return -EINVAL;
+	}
+
+	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ec_hdr)
+		return -ENOMEM;
+
+	ec_hdr->ec = cpu_to_be64(ec);
+
+	err = ubi_io_sync_erase(ubi, pnum, 0);
+	if (err < 0)
+		goto out_free;
+
+	err = ubi_io_write_ec_hdr(ubi, pnum, ec_hdr);
+
+out_free:
+	kfree(ec_hdr);
+	return err;
+}
+
+/**
+ * ubi_early_get_peb - get a free physical eraseblock.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ *
+ * This function returns a free physical eraseblock. It is supposed to be
+ * called on the UBI initialization stages when the wear-leveling sub-system is
+ * not initialized yet. This function picks a physical eraseblocks from one of
+ * the lists, writes the EC header if it is needed, and removes it from the
+ * list.
+ *
+ * This function returns a pointer to the "aeb" of the found free PEB in case
+ * of success and an error code in case of failure.
+ */
+struct ubi_ainf_peb *ubi_early_get_peb(struct ubi_device *ubi,
+				       struct ubi_attach_info *ai)
+{
+	int err = 0;
+	struct ubi_ainf_peb *aeb, *tmp_aeb;
+
+	if (!list_empty(&ai->free)) {
+		aeb = list_entry(ai->free.next, struct ubi_ainf_peb, u.list);
+		list_del(&aeb->u.list);
+		dbg_bld("return free PEB %d, EC %d", aeb->pnum, aeb->ec);
+		return aeb;
+	}
+
+	/*
+	 * We try to erase the first physical eraseblock from the erase list
+	 * and pick it if we succeed, or try to erase the next one if not. And
+	 * so forth. We don't want to take care about bad eraseblocks here -
+	 * they'll be handled later.
+	 */
+	list_for_each_entry_safe(aeb, tmp_aeb, &ai->erase, u.list) {
+		if (aeb->ec == UBI_UNKNOWN)
+			aeb->ec = ai->mean_ec;
+
+		err = early_erase_peb(ubi, ai, aeb->pnum, aeb->ec+1);
+		if (err)
+			continue;
+
+		aeb->ec += 1;
+		list_del(&aeb->u.list);
+		dbg_bld("return PEB %d, EC %d", aeb->pnum, aeb->ec);
+		return aeb;
+	}
+
+	ubi_err("no free eraseblocks");
+	return ERR_PTR(-ENOSPC);
+}
+
+/**
+ * check_corruption - check the data area of PEB.
+ * @ubi: UBI device description object
+ * @vid_hdr: the (corrupted) VID header of this PEB
+ * @pnum: the physical eraseblock number to check
+ *
+ * This is a helper function which is used to distinguish between VID header
+ * corruptions caused by power cuts and other reasons. If the PEB contains only
+ * 0xFF bytes in the data area, the VID header is most probably corrupted
+ * because of a power cut (%0 is returned in this case). Otherwise, it was
+ * probably corrupted for some other reasons (%1 is returned in this case). A
+ * negative error code is returned if a read error occurred.
+ *
+ * If the corruption reason was a power cut, UBI can safely erase this PEB.
+ * Otherwise, it should preserve it to avoid possibly destroying important
+ * information.
+ */
+static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr,
+			    int pnum)
+{
+	int err;
+
+	mutex_lock(&ubi->buf_mutex);
+	memset(ubi->peb_buf, 0x00, ubi->leb_size);
+
+	err = ubi_io_read(ubi, ubi->peb_buf, pnum, ubi->leb_start,
+			  ubi->leb_size);
+	if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) {
+		/*
+		 * Bit-flips or integrity errors while reading the data area.
+		 * It is difficult to say for sure what type of corruption is
+		 * this, but presumably a power cut happened while this PEB was
+		 * erased, so it became unstable and corrupted, and should be
+		 * erased.
+		 */
+		err = 0;
+		goto out_unlock;
+	}
+
+	if (err)
+		goto out_unlock;
+
+	if (ubi_check_pattern(ubi->peb_buf, 0xFF, ubi->leb_size))
+		goto out_unlock;
+
+	ubi_err("PEB %d contains corrupted VID header, and the data does not contain all 0xFF",
+		pnum);
+	ubi_err("this may be a non-UBI PEB or a severe VID header corruption which requires manual inspection");
+	ubi_dump_vid_hdr(vid_hdr);
+	pr_err("hexdump of PEB %d offset %d, length %d",
+	       pnum, ubi->leb_start, ubi->leb_size);
+	ubi_dbg_print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
+			       ubi->peb_buf, ubi->leb_size, 1);
+	err = 1;
+
+out_unlock:
+	mutex_unlock(&ubi->buf_mutex);
+	return err;
+}
+
+/**
+ * scan_peb - scan and process UBI headers of a PEB.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ * @pnum: the physical eraseblock number
+ * @vid: The volume ID of the found volume will be stored in this pointer
+ * @sqnum: The sqnum of the found volume will be stored in this pointer
+ *
+ * This function reads UBI headers of PEB @pnum, checks them, and adds
+ * information about this PEB to the corresponding list or RB-tree in the
+ * "attaching info" structure. Returns zero if the physical eraseblock was
+ * successfully handled and a negative error code in case of failure.
+ */
+static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		    int pnum, int *vid, unsigned long long *sqnum)
+{
+	long long uninitialized_var(ec);
+	int err, bitflips = 0, vol_id = -1, ec_err = 0;
+
+	dbg_bld("scan PEB %d", pnum);
+
+	/* Skip bad physical eraseblocks */
+	err = ubi_io_is_bad(ubi, pnum);
+	if (err < 0)
+		return err;
+	else if (err) {
+		ai->bad_peb_count += 1;
+		return 0;
+	}
+
+	err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
+	if (err < 0)
+		return err;
+	switch (err) {
+	case 0:
+		break;
+	case UBI_IO_BITFLIPS:
+		bitflips = 1;
+		break;
+	case UBI_IO_FF:
+		ai->empty_peb_count += 1;
+		return add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN,
+				   UBI_UNKNOWN, 0, &ai->erase);
+	case UBI_IO_FF_BITFLIPS:
+		ai->empty_peb_count += 1;
+		return add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN,
+				   UBI_UNKNOWN, 1, &ai->erase);
+	case UBI_IO_BAD_HDR_EBADMSG:
+	case UBI_IO_BAD_HDR:
+		/*
+		 * We have to also look at the VID header, possibly it is not
+		 * corrupted. Set %bitflips flag in order to make this PEB be
+		 * moved and EC be re-created.
+		 */
+		ec_err = err;
+		ec = UBI_UNKNOWN;
+		bitflips = 1;
+		break;
+	default:
+		ubi_err("'ubi_io_read_ec_hdr()' returned unknown code %d", err);
+		return -EINVAL;
+	}
+
+	if (!ec_err) {
+		int image_seq;
+
+		/* Make sure UBI version is OK */
+		if (ech->version != UBI_VERSION) {
+			ubi_err("this UBI version is %d, image version is %d",
+				UBI_VERSION, (int)ech->version);
+			return -EINVAL;
+		}
+
+		ec = be64_to_cpu(ech->ec);
+		if (ec > UBI_MAX_ERASECOUNTER) {
+			/*
+			 * Erase counter overflow. The EC headers have 64 bits
+			 * reserved, but we anyway make use of only 31 bit
+			 * values, as this seems to be enough for any existing
+			 * flash. Upgrade UBI and use 64-bit erase counters
+			 * internally.
+			 */
+			ubi_err("erase counter overflow, max is %d",
+				UBI_MAX_ERASECOUNTER);
+			ubi_dump_ec_hdr(ech);
+			return -EINVAL;
+		}
+
+		/*
+		 * Make sure that all PEBs have the same image sequence number.
+		 * This allows us to detect situations when users flash UBI
+		 * images incorrectly, so that the flash has the new UBI image
+		 * and leftovers from the old one. This feature was added
+		 * relatively recently, and the sequence number was always
+		 * zero, because old UBI implementations always set it to zero.
+		 * For this reasons, we do not panic if some PEBs have zero
+		 * sequence number, while other PEBs have non-zero sequence
+		 * number.
+		 */
+		image_seq = be32_to_cpu(ech->image_seq);
+		if (!ubi->image_seq)
+			ubi->image_seq = image_seq;
+		if (image_seq && ubi->image_seq != image_seq) {
+			ubi_err("bad image sequence number %d in PEB %d, expected %d",
+				image_seq, pnum, ubi->image_seq);
+			ubi_dump_ec_hdr(ech);
+			return -EINVAL;
+		}
+	}
+
+	/* OK, we've done with the EC header, let's look at the VID header */
+
+	err = ubi_io_read_vid_hdr(ubi, pnum, vidh, 0);
+	if (err < 0)
+		return err;
+	switch (err) {
+	case 0:
+		break;
+	case UBI_IO_BITFLIPS:
+		bitflips = 1;
+		break;
+	case UBI_IO_BAD_HDR_EBADMSG:
+		if (ec_err == UBI_IO_BAD_HDR_EBADMSG)
+			/*
+			 * Both EC and VID headers are corrupted and were read
+			 * with data integrity error, probably this is a bad
+			 * PEB, bit it is not marked as bad yet. This may also
+			 * be a result of power cut during erasure.
+			 */
+			ai->maybe_bad_peb_count += 1;
+	case UBI_IO_BAD_HDR:
+		if (ec_err)
+			/*
+			 * Both headers are corrupted. There is a possibility
+			 * that this a valid UBI PEB which has corresponding
+			 * LEB, but the headers are corrupted. However, it is
+			 * impossible to distinguish it from a PEB which just
+			 * contains garbage because of a power cut during erase
+			 * operation. So we just schedule this PEB for erasure.
+			 *
+			 * Besides, in case of NOR flash, we deliberately
+			 * corrupt both headers because NOR flash erasure is
+			 * slow and can start from the end.
+			 */
+			err = 0;
+		else
+			/*
+			 * The EC was OK, but the VID header is corrupted. We
+			 * have to check what is in the data area.
+			 */
+			err = check_corruption(ubi, vidh, pnum);
+
+		if (err < 0)
+			return err;
+		else if (!err)
+			/* This corruption is caused by a power cut */
+			err = add_to_list(ai, pnum, UBI_UNKNOWN,
+					  UBI_UNKNOWN, ec, 1, &ai->erase);
+		else
+			/* This is an unexpected corruption */
+			err = add_corrupted(ai, pnum, ec);
+		if (err)
+			return err;
+		goto adjust_mean_ec;
+	case UBI_IO_FF_BITFLIPS:
+		err = add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN,
+				  ec, 1, &ai->erase);
+		if (err)
+			return err;
+		goto adjust_mean_ec;
+	case UBI_IO_FF:
+		if (ec_err || bitflips)
+			err = add_to_list(ai, pnum, UBI_UNKNOWN,
+					  UBI_UNKNOWN, ec, 1, &ai->erase);
+		else
+			err = add_to_list(ai, pnum, UBI_UNKNOWN,
+					  UBI_UNKNOWN, ec, 0, &ai->free);
+		if (err)
+			return err;
+		goto adjust_mean_ec;
+	default:
+		ubi_err("'ubi_io_read_vid_hdr()' returned unknown code %d",
+			err);
+		return -EINVAL;
+	}
+
+	vol_id = be32_to_cpu(vidh->vol_id);
+	if (vid)
+		*vid = vol_id;
+	if (sqnum)
+		*sqnum = be64_to_cpu(vidh->sqnum);
+	if (vol_id > UBI_MAX_VOLUMES && vol_id != UBI_LAYOUT_VOLUME_ID) {
+		int lnum = be32_to_cpu(vidh->lnum);
+
+		/* Unsupported internal volume */
+		switch (vidh->compat) {
+		case UBI_COMPAT_DELETE:
+			if (vol_id != UBI_FM_SB_VOLUME_ID
+			    && vol_id != UBI_FM_DATA_VOLUME_ID) {
+				ubi_msg("\"delete\" compatible internal volume %d:%d found, will remove it",
+					vol_id, lnum);
+			}
+			err = add_to_list(ai, pnum, vol_id, lnum,
+					  ec, 1, &ai->erase);
+			if (err)
+				return err;
+			return 0;
+
+		case UBI_COMPAT_RO:
+			ubi_msg("read-only compatible internal volume %d:%d found, switch to read-only mode",
+				vol_id, lnum);
+			ubi->ro_mode = 1;
+			break;
+
+		case UBI_COMPAT_PRESERVE:
+			ubi_msg("\"preserve\" compatible internal volume %d:%d found",
+				vol_id, lnum);
+			err = add_to_list(ai, pnum, vol_id, lnum,
+					  ec, 0, &ai->alien);
+			if (err)
+				return err;
+			return 0;
+
+		case UBI_COMPAT_REJECT:
+			ubi_err("incompatible internal volume %d:%d found",
+				vol_id, lnum);
+			return -EINVAL;
+		}
+	}
+
+	if (ec_err)
+		ubi_warn("valid VID header but corrupted EC header at PEB %d",
+			 pnum);
+	err = ubi_add_to_av(ubi, ai, pnum, ec, vidh, bitflips);
+	if (err)
+		return err;
+
+adjust_mean_ec:
+	if (!ec_err) {
+		ai->ec_sum += ec;
+		ai->ec_count += 1;
+		if (ec > ai->max_ec)
+			ai->max_ec = ec;
+		if (ec < ai->min_ec)
+			ai->min_ec = ec;
+	}
+
+	return 0;
+}
+
+/**
+ * late_analysis - analyze the overall situation with PEB.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ *
+ * This is a helper function which takes a look what PEBs we have after we
+ * gather information about all of them ("ai" is compete). It decides whether
+ * the flash is empty and should be formatted of whether there are too many
+ * corrupted PEBs and we should not attach this MTD device. Returns zero if we
+ * should proceed with attaching the MTD device, and %-EINVAL if we should not.
+ */
+static int late_analysis(struct ubi_device *ubi, struct ubi_attach_info *ai)
+{
+	struct ubi_ainf_peb *aeb;
+	int max_corr, peb_count;
+
+	peb_count = ubi->peb_count - ai->bad_peb_count - ai->alien_peb_count;
+	max_corr = peb_count / 20 ?: 8;
+
+	/*
+	 * Few corrupted PEBs is not a problem and may be just a result of
+	 * unclean reboots. However, many of them may indicate some problems
+	 * with the flash HW or driver.
+	 */
+	if (ai->corr_peb_count) {
+		ubi_err("%d PEBs are corrupted and preserved",
+			ai->corr_peb_count);
+		pr_err("Corrupted PEBs are:");
+		list_for_each_entry(aeb, &ai->corr, u.list)
+			pr_cont(" %d", aeb->pnum);
+		pr_cont("\n");
+
+		/*
+		 * If too many PEBs are corrupted, we refuse attaching,
+		 * otherwise, only print a warning.
+		 */
+		if (ai->corr_peb_count >= max_corr) {
+			ubi_err("too many corrupted PEBs, refusing");
+			return -EINVAL;
+		}
+	}
+
+	if (ai->empty_peb_count + ai->maybe_bad_peb_count == peb_count) {
+		/*
+		 * All PEBs are empty, or almost all - a couple PEBs look like
+		 * they may be bad PEBs which were not marked as bad yet.
+		 *
+		 * This piece of code basically tries to distinguish between
+		 * the following situations:
+		 *
+		 * 1. Flash is empty, but there are few bad PEBs, which are not
+		 *    marked as bad so far, and which were read with error. We
+		 *    want to go ahead and format this flash. While formatting,
+		 *    the faulty PEBs will probably be marked as bad.
+		 *
+		 * 2. Flash contains non-UBI data and we do not want to format
+		 *    it and destroy possibly important information.
+		 */
+		if (ai->maybe_bad_peb_count <= 2) {
+			ai->is_empty = 1;
+			ubi_msg("empty MTD device detected");
+			get_random_bytes(&ubi->image_seq,
+					 sizeof(ubi->image_seq));
+		} else {
+			ubi_err("MTD device is not UBI-formatted and possibly contains non-UBI data - refusing it");
+			return -EINVAL;
+		}
+
+	}
+
+	return 0;
+}
+
+/**
+ * destroy_av - free volume attaching information.
+ * @av: volume attaching information
+ * @ai: attaching information
+ *
+ * This function destroys the volume attaching information.
+ */
+static void destroy_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av)
+{
+	struct ubi_ainf_peb *aeb;
+	struct rb_node *this = av->root.rb_node;
+
+	while (this) {
+		if (this->rb_left)
+			this = this->rb_left;
+		else if (this->rb_right)
+			this = this->rb_right;
+		else {
+			aeb = rb_entry(this, struct ubi_ainf_peb, u.rb);
+			this = rb_parent(this);
+			if (this) {
+				if (this->rb_left == &aeb->u.rb)
+					this->rb_left = NULL;
+				else
+					this->rb_right = NULL;
+			}
+
+			kmem_cache_free(ai->aeb_slab_cache, aeb);
+		}
+	}
+	kfree(av);
+}
+
+/**
+ * destroy_ai - destroy attaching information.
+ * @ai: attaching information
+ */
+static void destroy_ai(struct ubi_attach_info *ai)
+{
+	struct ubi_ainf_peb *aeb, *aeb_tmp;
+	struct ubi_ainf_volume *av;
+	struct rb_node *rb;
+
+	list_for_each_entry_safe(aeb, aeb_tmp, &ai->alien, u.list) {
+		list_del(&aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, aeb);
+	}
+	list_for_each_entry_safe(aeb, aeb_tmp, &ai->erase, u.list) {
+		list_del(&aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, aeb);
+	}
+	list_for_each_entry_safe(aeb, aeb_tmp, &ai->corr, u.list) {
+		list_del(&aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, aeb);
+	}
+	list_for_each_entry_safe(aeb, aeb_tmp, &ai->free, u.list) {
+		list_del(&aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, aeb);
+	}
+
+	/* Destroy the volume RB-tree */
+	rb = ai->volumes.rb_node;
+	while (rb) {
+		if (rb->rb_left)
+			rb = rb->rb_left;
+		else if (rb->rb_right)
+			rb = rb->rb_right;
+		else {
+			av = rb_entry(rb, struct ubi_ainf_volume, rb);
+
+			rb = rb_parent(rb);
+			if (rb) {
+				if (rb->rb_left == &av->rb)
+					rb->rb_left = NULL;
+				else
+					rb->rb_right = NULL;
+			}
+
+			destroy_av(ai, av);
+		}
+	}
+
+	if (ai->aeb_slab_cache)
+		kmem_cache_destroy(ai->aeb_slab_cache);
+
+	kfree(ai);
+}
+
+/**
+ * scan_all - scan entire MTD device.
+ * @ubi: UBI device description object
+ * @ai: attach info object
+ * @start: start scanning at this PEB
+ *
+ * This function does full scanning of an MTD device and returns complete
+ * information about it in form of a "struct ubi_attach_info" object. In case
+ * of failure, an error code is returned.
+ */
+static int scan_all(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		    int start)
+{
+	int err, pnum;
+	struct rb_node *rb1, *rb2;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb;
+
+	err = -ENOMEM;
+
+	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ech)
+		return err;
+
+	vidh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+	if (!vidh)
+		goto out_ech;
+
+	for (pnum = start; pnum < ubi->peb_count; pnum++) {
+		cond_resched();
+
+		dbg_gen("process PEB %d", pnum);
+		err = scan_peb(ubi, ai, pnum, NULL, NULL);
+		if (err < 0)
+			goto out_vidh;
+	}
+
+	ubi_msg("scanning is finished");
+
+	/* Calculate mean erase counter */
+	if (ai->ec_count)
+		ai->mean_ec = div_u64(ai->ec_sum, ai->ec_count);
+
+	err = late_analysis(ubi, ai);
+	if (err)
+		goto out_vidh;
+
+	/*
+	 * In case of unknown erase counter we use the mean erase counter
+	 * value.
+	 */
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) {
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb)
+			if (aeb->ec == UBI_UNKNOWN)
+				aeb->ec = ai->mean_ec;
+	}
+
+	list_for_each_entry(aeb, &ai->free, u.list) {
+		if (aeb->ec == UBI_UNKNOWN)
+			aeb->ec = ai->mean_ec;
+	}
+
+	list_for_each_entry(aeb, &ai->corr, u.list)
+		if (aeb->ec == UBI_UNKNOWN)
+			aeb->ec = ai->mean_ec;
+
+	list_for_each_entry(aeb, &ai->erase, u.list)
+		if (aeb->ec == UBI_UNKNOWN)
+			aeb->ec = ai->mean_ec;
+
+	err = self_check_ai(ubi, ai);
+	if (err)
+		goto out_vidh;
+
+	ubi_free_vid_hdr(ubi, vidh);
+	kfree(ech);
+
+	return 0;
+
+out_vidh:
+	ubi_free_vid_hdr(ubi, vidh);
+out_ech:
+	kfree(ech);
+	return err;
+}
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+
+/**
+ * scan_fastmap - try to find a fastmap and attach from it.
+ * @ubi: UBI device description object
+ * @ai: attach info object
+ *
+ * Returns 0 on success, negative return values indicate an internal
+ * error.
+ * UBI_NO_FASTMAP denotes that no fastmap was found.
+ * UBI_BAD_FASTMAP denotes that the found fastmap was invalid.
+ */
+static int scan_fast(struct ubi_device *ubi, struct ubi_attach_info *ai)
+{
+	int err, pnum, fm_anchor = -1;
+	unsigned long long max_sqnum = 0;
+
+	err = -ENOMEM;
+
+	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ech)
+		goto out;
+
+	vidh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+	if (!vidh)
+		goto out_ech;
+
+	for (pnum = 0; pnum < UBI_FM_MAX_START; pnum++) {
+		int vol_id = -1;
+		unsigned long long sqnum = -1;
+		cond_resched();
+
+		dbg_gen("process PEB %d", pnum);
+		err = scan_peb(ubi, ai, pnum, &vol_id, &sqnum);
+		if (err < 0)
+			goto out_vidh;
+
+		if (vol_id == UBI_FM_SB_VOLUME_ID && sqnum > max_sqnum) {
+			max_sqnum = sqnum;
+			fm_anchor = pnum;
+		}
+	}
+
+	ubi_free_vid_hdr(ubi, vidh);
+	kfree(ech);
+
+	if (fm_anchor < 0)
+		return UBI_NO_FASTMAP;
+
+	return ubi_scan_fastmap(ubi, ai, fm_anchor);
+
+out_vidh:
+	ubi_free_vid_hdr(ubi, vidh);
+out_ech:
+	kfree(ech);
+out:
+	return err;
+}
+
+#endif
+
+static struct ubi_attach_info *alloc_ai(const char *slab_name)
+{
+	struct ubi_attach_info *ai;
+
+	ai = kzalloc(sizeof(struct ubi_attach_info), GFP_KERNEL);
+	if (!ai)
+		return ai;
+
+	INIT_LIST_HEAD(&ai->corr);
+	INIT_LIST_HEAD(&ai->free);
+	INIT_LIST_HEAD(&ai->erase);
+	INIT_LIST_HEAD(&ai->alien);
+	ai->volumes = RB_ROOT;
+	ai->aeb_slab_cache = kmem_cache_create(slab_name,
+					       sizeof(struct ubi_ainf_peb),
+					       0, 0, NULL);
+	if (!ai->aeb_slab_cache) {
+		kfree(ai);
+		ai = NULL;
+	}
+
+	return ai;
+}
+
+/**
+ * ubi_attach - attach an MTD device.
+ * @ubi: UBI device descriptor
+ * @force_scan: if set to non-zero attach by scanning
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+int ubi_attach(struct ubi_device *ubi, int force_scan)
+{
+	int err;
+	struct ubi_attach_info *ai;
+
+	ai = alloc_ai("ubi_aeb_slab_cache");
+	if (!ai)
+		return -ENOMEM;
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	/* On small flash devices we disable fastmap in any case. */
+	if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
+		ubi->fm_disabled = 1;
+		force_scan = 1;
+	}
+
+	if (force_scan)
+		err = scan_all(ubi, ai, 0);
+	else {
+		err = scan_fast(ubi, ai);
+		if (err > 0) {
+			if (err != UBI_NO_FASTMAP) {
+				destroy_ai(ai);
+				ai = alloc_ai("ubi_aeb_slab_cache2");
+				if (!ai)
+					return -ENOMEM;
+
+				err = scan_all(ubi, ai, 0);
+			} else {
+				err = scan_all(ubi, ai, UBI_FM_MAX_START);
+			}
+		}
+	}
+#else
+	err = scan_all(ubi, ai, 0);
+#endif
+	if (err)
+		goto out_ai;
+
+	ubi->bad_peb_count = ai->bad_peb_count;
+	ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count;
+	ubi->corr_peb_count = ai->corr_peb_count;
+	ubi->max_ec = ai->max_ec;
+	ubi->mean_ec = ai->mean_ec;
+	dbg_gen("max. sequence number:       %llu", ai->max_sqnum);
+
+	err = ubi_read_volume_table(ubi, ai);
+	if (err)
+		goto out_ai;
+
+	err = ubi_wl_init(ubi, ai);
+	if (err)
+		goto out_vtbl;
+
+	err = ubi_eba_init(ubi, ai);
+	if (err)
+		goto out_wl;
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	if (ubi->fm && ubi_dbg_chk_gen(ubi)) {
+		struct ubi_attach_info *scan_ai;
+
+		scan_ai = alloc_ai("ubi_ckh_aeb_slab_cache");
+		if (!scan_ai) {
+			err = -ENOMEM;
+			goto out_wl;
+		}
+
+		err = scan_all(ubi, scan_ai, 0);
+		if (err) {
+			destroy_ai(scan_ai);
+			goto out_wl;
+		}
+
+		err = self_check_eba(ubi, ai, scan_ai);
+		destroy_ai(scan_ai);
+
+		if (err)
+			goto out_wl;
+	}
+#endif
+
+	destroy_ai(ai);
+	return 0;
+
+out_wl:
+	ubi_wl_close(ubi);
+out_vtbl:
+	ubi_free_internal_volumes(ubi);
+	vfree(ubi->vtbl);
+out_ai:
+	destroy_ai(ai);
+	return err;
+}
+
+/**
+ * self_check_ai - check the attaching information.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ *
+ * This function returns zero if the attaching information is all right, and a
+ * negative error code if not or if an error occurred.
+ */
+static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai)
+{
+	int pnum, err, vols_found = 0;
+	struct rb_node *rb1, *rb2;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb, *last_aeb;
+	uint8_t *buf;
+
+	if (!ubi_dbg_chk_gen(ubi))
+		return 0;
+
+	/*
+	 * At first, check that attaching information is OK.
+	 */
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) {
+		int leb_count = 0;
+
+		cond_resched();
+
+		vols_found += 1;
+
+		if (ai->is_empty) {
+			ubi_err("bad is_empty flag");
+			goto bad_av;
+		}
+
+		if (av->vol_id < 0 || av->highest_lnum < 0 ||
+		    av->leb_count < 0 || av->vol_type < 0 || av->used_ebs < 0 ||
+		    av->data_pad < 0 || av->last_data_size < 0) {
+			ubi_err("negative values");
+			goto bad_av;
+		}
+
+		if (av->vol_id >= UBI_MAX_VOLUMES &&
+		    av->vol_id < UBI_INTERNAL_VOL_START) {
+			ubi_err("bad vol_id");
+			goto bad_av;
+		}
+
+		if (av->vol_id > ai->highest_vol_id) {
+			ubi_err("highest_vol_id is %d, but vol_id %d is there",
+				ai->highest_vol_id, av->vol_id);
+			goto out;
+		}
+
+		if (av->vol_type != UBI_DYNAMIC_VOLUME &&
+		    av->vol_type != UBI_STATIC_VOLUME) {
+			ubi_err("bad vol_type");
+			goto bad_av;
+		}
+
+		if (av->data_pad > ubi->leb_size / 2) {
+			ubi_err("bad data_pad");
+			goto bad_av;
+		}
+
+		last_aeb = NULL;
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb) {
+			cond_resched();
+
+			last_aeb = aeb;
+			leb_count += 1;
+
+			if (aeb->pnum < 0 || aeb->ec < 0) {
+				ubi_err("negative values");
+				goto bad_aeb;
+			}
+
+			if (aeb->ec < ai->min_ec) {
+				ubi_err("bad ai->min_ec (%d), %d found",
+					ai->min_ec, aeb->ec);
+				goto bad_aeb;
+			}
+
+			if (aeb->ec > ai->max_ec) {
+				ubi_err("bad ai->max_ec (%d), %d found",
+					ai->max_ec, aeb->ec);
+				goto bad_aeb;
+			}
+
+			if (aeb->pnum >= ubi->peb_count) {
+				ubi_err("too high PEB number %d, total PEBs %d",
+					aeb->pnum, ubi->peb_count);
+				goto bad_aeb;
+			}
+
+			if (av->vol_type == UBI_STATIC_VOLUME) {
+				if (aeb->lnum >= av->used_ebs) {
+					ubi_err("bad lnum or used_ebs");
+					goto bad_aeb;
+				}
+			} else {
+				if (av->used_ebs != 0) {
+					ubi_err("non-zero used_ebs");
+					goto bad_aeb;
+				}
+			}
+
+			if (aeb->lnum > av->highest_lnum) {
+				ubi_err("incorrect highest_lnum or lnum");
+				goto bad_aeb;
+			}
+		}
+
+		if (av->leb_count != leb_count) {
+			ubi_err("bad leb_count, %d objects in the tree",
+				leb_count);
+			goto bad_av;
+		}
+
+		if (!last_aeb)
+			continue;
+
+		aeb = last_aeb;
+
+		if (aeb->lnum != av->highest_lnum) {
+			ubi_err("bad highest_lnum");
+			goto bad_aeb;
+		}
+	}
+
+	if (vols_found != ai->vols_found) {
+		ubi_err("bad ai->vols_found %d, should be %d",
+			ai->vols_found, vols_found);
+		goto out;
+	}
+
+	/* Check that attaching information is correct */
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) {
+		last_aeb = NULL;
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb) {
+			int vol_type;
+
+			cond_resched();
+
+			last_aeb = aeb;
+
+			err = ubi_io_read_vid_hdr(ubi, aeb->pnum, vidh, 1);
+			if (err && err != UBI_IO_BITFLIPS) {
+				ubi_err("VID header is not OK (%d)", err);
+				if (err > 0)
+					err = -EIO;
+				return err;
+			}
+
+			vol_type = vidh->vol_type == UBI_VID_DYNAMIC ?
+				   UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
+			if (av->vol_type != vol_type) {
+				ubi_err("bad vol_type");
+				goto bad_vid_hdr;
+			}
+
+			if (aeb->sqnum != be64_to_cpu(vidh->sqnum)) {
+				ubi_err("bad sqnum %llu", aeb->sqnum);
+				goto bad_vid_hdr;
+			}
+
+			if (av->vol_id != be32_to_cpu(vidh->vol_id)) {
+				ubi_err("bad vol_id %d", av->vol_id);
+				goto bad_vid_hdr;
+			}
+
+			if (av->compat != vidh->compat) {
+				ubi_err("bad compat %d", vidh->compat);
+				goto bad_vid_hdr;
+			}
+
+			if (aeb->lnum != be32_to_cpu(vidh->lnum)) {
+				ubi_err("bad lnum %d", aeb->lnum);
+				goto bad_vid_hdr;
+			}
+
+			if (av->used_ebs != be32_to_cpu(vidh->used_ebs)) {
+				ubi_err("bad used_ebs %d", av->used_ebs);
+				goto bad_vid_hdr;
+			}
+
+			if (av->data_pad != be32_to_cpu(vidh->data_pad)) {
+				ubi_err("bad data_pad %d", av->data_pad);
+				goto bad_vid_hdr;
+			}
+		}
+
+		if (!last_aeb)
+			continue;
+
+		if (av->highest_lnum != be32_to_cpu(vidh->lnum)) {
+			ubi_err("bad highest_lnum %d", av->highest_lnum);
+			goto bad_vid_hdr;
+		}
+
+		if (av->last_data_size != be32_to_cpu(vidh->data_size)) {
+			ubi_err("bad last_data_size %d", av->last_data_size);
+			goto bad_vid_hdr;
+		}
+	}
+
+	/*
+	 * Make sure that all the physical eraseblocks are in one of the lists
+	 * or trees.
+	 */
+	buf = kzalloc(ubi->peb_count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	for (pnum = 0; pnum < ubi->peb_count; pnum++) {
+		err = ubi_io_is_bad(ubi, pnum);
+		if (err < 0) {
+			kfree(buf);
+			return err;
+		} else if (err)
+			buf[pnum] = 1;
+	}
+
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb)
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb)
+			buf[aeb->pnum] = 1;
+
+	list_for_each_entry(aeb, &ai->free, u.list)
+		buf[aeb->pnum] = 1;
+
+	list_for_each_entry(aeb, &ai->corr, u.list)
+		buf[aeb->pnum] = 1;
+
+	list_for_each_entry(aeb, &ai->erase, u.list)
+		buf[aeb->pnum] = 1;
+
+	list_for_each_entry(aeb, &ai->alien, u.list)
+		buf[aeb->pnum] = 1;
+
+	err = 0;
+	for (pnum = 0; pnum < ubi->peb_count; pnum++)
+		if (!buf[pnum]) {
+			ubi_err("PEB %d is not referred", pnum);
+			err = 1;
+		}
+
+	kfree(buf);
+	if (err)
+		goto out;
+	return 0;
+
+bad_aeb:
+	ubi_err("bad attaching information about LEB %d", aeb->lnum);
+	ubi_dump_aeb(aeb, 0);
+	ubi_dump_av(av);
+	goto out;
+
+bad_av:
+	ubi_err("bad attaching information about volume %d", av->vol_id);
+	ubi_dump_av(av);
+	goto out;
+
+bad_vid_hdr:
+	ubi_err("bad attaching information about volume %d", av->vol_id);
+	ubi_dump_av(av);
+	ubi_dump_vid_hdr(vidh);
+
+out:
+	dump_stack();
+	return -EINVAL;
+}
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 6d86c0b..7094b9c 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -15,56 +15,88 @@
  * module load parameters or the kernel boot parameters. If MTD devices were
  * specified, UBI does not attach any MTD device, but it is possible to do
  * later using the "UBI control device".
- *
- * At the moment we only attach UBI devices by scanning, which will become a
- * bottleneck when flashes reach certain large size. Then one may improve UBI
- * and add other methods, although it does not seem to be easy to do.
  */
 
-#ifdef UBI_LINUX
-#include <linux/err.h>
+#define __UBOOT__
+#ifndef __UBOOT__
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/stringify.h>
+#include <linux/namei.h>
 #include <linux/stat.h>
 #include <linux/miscdevice.h>
 #include <linux/log2.h>
 #include <linux/kthread.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/major.h>
+#else
+#include <linux/compat.h>
 #endif
+#include <linux/err.h>
 #include <ubi_uboot.h>
+#include <linux/mtd/partitions.h>
+
 #include "ubi.h"
 
+/* Maximum length of the 'mtd=' parameter */
+#define MTD_PARAM_LEN_MAX 64
+
+/* Maximum number of comma-separated items in the 'mtd=' parameter */
+#define MTD_PARAM_MAX_COUNT 4
+
+/* Maximum value for the number of bad PEBs per 1024 PEBs */
+#define MAX_MTD_UBI_BEB_LIMIT 768
+
+#ifdef CONFIG_MTD_UBI_MODULE
+#define ubi_is_module() 1
+#else
+#define ubi_is_module() 0
+#endif
+
 #if (CONFIG_SYS_MALLOC_LEN < (512 << 10))
 #error Malloc area too small for UBI, increase CONFIG_SYS_MALLOC_LEN to >= 512k
 #endif
 
-/* Maximum length of the 'mtd=' parameter */
-#define MTD_PARAM_LEN_MAX 64
-
 /**
  * struct mtd_dev_param - MTD device parameter description data structure.
- * @name: MTD device name or number string
+ * @name: MTD character device node path, MTD device name, or MTD device number
+ *        string
  * @vid_hdr_offs: VID header offset
+ * @max_beb_per1024: maximum expected number of bad PEBs per 1024 PEBs
  */
-struct mtd_dev_param
-{
+struct mtd_dev_param {
 	char name[MTD_PARAM_LEN_MAX];
+	int ubi_num;
 	int vid_hdr_offs;
+	int max_beb_per1024;
 };
 
 /* Numbers of elements set in the @mtd_dev_param array */
-static int mtd_devs = 0;
+static int __initdata mtd_devs;
 
 /* MTD devices specification parameters */
-static struct mtd_dev_param mtd_dev_param[UBI_MAX_DEVICES];
-
+static struct mtd_dev_param __initdata mtd_dev_param[UBI_MAX_DEVICES];
+#ifndef __UBOOT__
+#ifdef CONFIG_MTD_UBI_FASTMAP
+/* UBI module parameter to enable fastmap automatically on non-fastmap images */
+static bool fm_autoconvert;
+#endif
+#else
+#ifdef CONFIG_MTD_UBI_FASTMAP
+#if !defined(CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT)
+#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 0
+#endif
+static bool fm_autoconvert = CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT;
+#endif
+#endif
 /* Root UBI "class" object (corresponds to '/<sysfs>/class/ubi/') */
 struct class *ubi_class;
 
-#ifdef UBI_LINUX
 /* Slab cache for wear-leveling entries */
 struct kmem_cache *ubi_wl_entry_slab;
 
+#ifndef __UBOOT__
 /* UBI control character device */
 static struct miscdevice ubi_ctrl_cdev = {
 	.minor = MISC_DYNAMIC_MINOR,
@@ -74,9 +106,13 @@ static struct miscdevice ubi_ctrl_cdev = {
 #endif
 
 /* All UBI devices in system */
+#ifndef __UBOOT__
+static struct ubi_device *ubi_devices[UBI_MAX_DEVICES];
+#else
 struct ubi_device *ubi_devices[UBI_MAX_DEVICES];
+#endif
 
-#ifdef UBI_LINUX
+#ifndef __UBOOT__
 /* Serializes UBI devices creations and removals */
 DEFINE_MUTEX(ubi_devices_mutex);
 
@@ -84,7 +120,8 @@ DEFINE_MUTEX(ubi_devices_mutex);
 static DEFINE_SPINLOCK(ubi_devices_lock);
 
 /* "Show" method for files in '/<sysfs>/class/ubi/' */
-static ssize_t ubi_version_show(struct class *class, char *buf)
+static ssize_t ubi_version_show(struct class *class,
+				struct class_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%d\n", UBI_VERSION);
 }
@@ -122,6 +159,112 @@ static struct device_attribute dev_mtd_num =
 #endif
 
 /**
+ * ubi_volume_notify - send a volume change notification.
+ * @ubi: UBI device description object
+ * @vol: volume description object of the changed volume
+ * @ntype: notification type to send (%UBI_VOLUME_ADDED, etc)
+ *
+ * This is a helper function which notifies all subscribers about a volume
+ * change event (creation, removal, re-sizing, re-naming, updating). Returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+int ubi_volume_notify(struct ubi_device *ubi, struct ubi_volume *vol, int ntype)
+{
+	struct ubi_notification nt;
+
+	ubi_do_get_device_info(ubi, &nt.di);
+	ubi_do_get_volume_info(ubi, vol, &nt.vi);
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	switch (ntype) {
+	case UBI_VOLUME_ADDED:
+	case UBI_VOLUME_REMOVED:
+	case UBI_VOLUME_RESIZED:
+	case UBI_VOLUME_RENAMED:
+		if (ubi_update_fastmap(ubi)) {
+			ubi_err("Unable to update fastmap!");
+			ubi_ro_mode(ubi);
+		}
+	}
+#endif
+	return blocking_notifier_call_chain(&ubi_notifiers, ntype, &nt);
+}
+
+/**
+ * ubi_notify_all - send a notification to all volumes.
+ * @ubi: UBI device description object
+ * @ntype: notification type to send (%UBI_VOLUME_ADDED, etc)
+ * @nb: the notifier to call
+ *
+ * This function walks all volumes of UBI device @ubi and sends the @ntype
+ * notification for each volume. If @nb is %NULL, then all registered notifiers
+ * are called, otherwise only the @nb notifier is called. Returns the number of
+ * sent notifications.
+ */
+int ubi_notify_all(struct ubi_device *ubi, int ntype, struct notifier_block *nb)
+{
+	struct ubi_notification nt;
+	int i, count = 0;
+#ifndef __UBOOT__
+	int ret;
+#endif
+
+	ubi_do_get_device_info(ubi, &nt.di);
+
+	mutex_lock(&ubi->device_mutex);
+	for (i = 0; i < ubi->vtbl_slots; i++) {
+		/*
+		 * Since the @ubi->device is locked, and we are not going to
+		 * change @ubi->volumes, we do not have to lock
+		 * @ubi->volumes_lock.
+		 */
+		if (!ubi->volumes[i])
+			continue;
+
+		ubi_do_get_volume_info(ubi, ubi->volumes[i], &nt.vi);
+#ifndef __UBOOT__
+		if (nb)
+			nb->notifier_call(nb, ntype, &nt);
+		else
+			ret = blocking_notifier_call_chain(&ubi_notifiers, ntype,
+						     &nt);
+#endif
+		count += 1;
+	}
+	mutex_unlock(&ubi->device_mutex);
+
+	return count;
+}
+
+/**
+ * ubi_enumerate_volumes - send "add" notification for all existing volumes.
+ * @nb: the notifier to call
+ *
+ * This function walks all UBI devices and volumes and sends the
+ * %UBI_VOLUME_ADDED notification for each volume. If @nb is %NULL, then all
+ * registered notifiers are called, otherwise only the @nb notifier is called.
+ * Returns the number of sent notifications.
+ */
+int ubi_enumerate_volumes(struct notifier_block *nb)
+{
+	int i, count = 0;
+
+	/*
+	 * Since the @ubi_devices_mutex is locked, and we are not going to
+	 * change @ubi_devices, we do not have to lock @ubi_devices_lock.
+	 */
+	for (i = 0; i < UBI_MAX_DEVICES; i++) {
+		struct ubi_device *ubi = ubi_devices[i];
+
+		if (!ubi)
+			continue;
+		count += ubi_notify_all(ubi, UBI_VOLUME_ADDED, nb);
+	}
+
+	return count;
+}
+
+/**
  * ubi_get_device - get UBI device.
  * @ubi_num: UBI device number
  *
@@ -159,8 +302,7 @@ void ubi_put_device(struct ubi_device *ubi)
 }
 
 /**
- * ubi_get_by_major - get UBI device description object by character device
- *                    major number.
+ * ubi_get_by_major - get UBI device by character device major number.
  * @major: major number
  *
  * This function is similar to 'ubi_get_device()', but it searches the device
@@ -213,7 +355,7 @@ int ubi_major2num(int major)
 	return ubi_num;
 }
 
-#ifdef UBI_LINUX
+#ifndef __UBOOT__
 /* "Show" method for files in '/<sysfs>/class/ubi/ubiX/' */
 static ssize_t dev_attribute_show(struct device *dev,
 				  struct device_attribute *attr, char *buf)
@@ -265,28 +407,35 @@ static ssize_t dev_attribute_show(struct device *dev,
 	return ret;
 }
 
-/* Fake "release" method for UBI devices */
-static void dev_release(struct device *dev) { }
+static void dev_release(struct device *dev)
+{
+	struct ubi_device *ubi = container_of(dev, struct ubi_device, dev);
+
+	kfree(ubi);
+}
 
 /**
  * ubi_sysfs_init - initialize sysfs for an UBI device.
  * @ubi: UBI device description object
+ * @ref: set to %1 on exit in case of failure if a reference to @ubi->dev was
+ *       taken
  *
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-static int ubi_sysfs_init(struct ubi_device *ubi)
+static int ubi_sysfs_init(struct ubi_device *ubi, int *ref)
 {
 	int err;
 
 	ubi->dev.release = dev_release;
 	ubi->dev.devt = ubi->cdev.dev;
 	ubi->dev.class = ubi_class;
-	sprintf(&ubi->dev.bus_id[0], UBI_NAME_STR"%d", ubi->ubi_num);
+	dev_set_name(&ubi->dev, UBI_NAME_STR"%d", ubi->ubi_num);
 	err = device_register(&ubi->dev);
 	if (err)
 		return err;
 
+	*ref = 1;
 	err = device_create_file(&ubi->dev, &dev_eraseblock_size);
 	if (err)
 		return err;
@@ -343,7 +492,7 @@ static void ubi_sysfs_close(struct ubi_device *ubi)
 #endif
 
 /**
- * kill_volumes - destroy all volumes.
+ * kill_volumes - destroy all user volumes.
  * @ubi: UBI device description object
  */
 static void kill_volumes(struct ubi_device *ubi)
@@ -358,17 +507,29 @@ static void kill_volumes(struct ubi_device *ubi)
 /**
  * uif_init - initialize user interfaces for an UBI device.
  * @ubi: UBI device description object
+ * @ref: set to %1 on exit in case of failure if a reference to @ubi->dev was
+ *       taken, otherwise set to %0
+ *
+ * This function initializes various user interfaces for an UBI device. If the
+ * initialization fails at an early stage, this function frees all the
+ * resources it allocated, returns an error, and @ref is set to %0. However,
+ * if the initialization fails after the UBI device was registered in the
+ * driver core subsystem, this function takes a reference to @ubi->dev, because
+ * otherwise the release function ('dev_release()') would free whole @ubi
+ * object. The @ref argument is set to %1 in this case. The caller has to put
+ * this reference.
  *
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-static int uif_init(struct ubi_device *ubi)
+static int uif_init(struct ubi_device *ubi, int *ref)
 {
 	int i, err;
-#ifdef UBI_LINUX
+#ifndef __UBOOT__
 	dev_t dev;
 #endif
 
+	*ref = 0;
 	sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num);
 
 	/*
@@ -387,7 +548,7 @@ static int uif_init(struct ubi_device *ubi)
 
 	ubi_assert(MINOR(dev) == 0);
 	cdev_init(&ubi->cdev, &ubi_cdev_operations);
-	dbg_msg("%s major is %u", ubi->ubi_name, MAJOR(dev));
+	dbg_gen("%s major is %u", ubi->ubi_name, MAJOR(dev));
 	ubi->cdev.owner = THIS_MODULE;
 
 	err = cdev_add(&ubi->cdev, dev, 1);
@@ -396,7 +557,7 @@ static int uif_init(struct ubi_device *ubi)
 		goto out_unreg;
 	}
 
-	err = ubi_sysfs_init(ubi);
+	err = ubi_sysfs_init(ubi, ref);
 	if (err)
 		goto out_sysfs;
 
@@ -414,6 +575,8 @@ static int uif_init(struct ubi_device *ubi)
 out_volumes:
 	kill_volumes(ubi);
 out_sysfs:
+	if (*ref)
+		get_device(&ubi->dev);
 	ubi_sysfs_close(ubi);
 	cdev_del(&ubi->cdev);
 out_unreg:
@@ -425,6 +588,10 @@ out_unreg:
 /**
  * uif_close - close user interfaces for an UBI device.
  * @ubi: UBI device description object
+ *
+ * Note, since this function un-registers UBI volume device objects (@vol->dev),
+ * the memory allocated voe the volumes is freed as well (in the release
+ * function).
  */
 static void uif_close(struct ubi_device *ubi)
 {
@@ -435,58 +602,52 @@ static void uif_close(struct ubi_device *ubi)
 }
 
 /**
- * attach_by_scanning - attach an MTD device using scanning method.
- * @ubi: UBI device descriptor
- *
- * This function returns zero in case of success and a negative error code in
- * case of failure.
- *
- * Note, currently this is the only method to attach UBI devices. Hopefully in
- * the future we'll have more scalable attaching methods and avoid full media
- * scanning. But even in this case scanning will be needed as a fall-back
- * attaching method if there are some on-flash table corruptions.
+ * ubi_free_internal_volumes - free internal volumes.
+ * @ubi: UBI device description object
  */
-static int attach_by_scanning(struct ubi_device *ubi)
+void ubi_free_internal_volumes(struct ubi_device *ubi)
 {
-	int err;
-	struct ubi_scan_info *si;
+	int i;
 
-	si = ubi_scan(ubi);
-	if (IS_ERR(si))
-		return PTR_ERR(si);
+	for (i = ubi->vtbl_slots;
+	     i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
+		kfree(ubi->volumes[i]->eba_tbl);
+		kfree(ubi->volumes[i]);
+	}
+}
 
-	ubi->bad_peb_count = si->bad_peb_count;
-	ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count;
-	ubi->max_ec = si->max_ec;
-	ubi->mean_ec = si->mean_ec;
+static int get_bad_peb_limit(const struct ubi_device *ubi, int max_beb_per1024)
+{
+	int limit, device_pebs;
+	uint64_t device_size;
 
-	err = ubi_read_volume_table(ubi, si);
-	if (err)
-		goto out_si;
+	if (!max_beb_per1024)
+		return 0;
 
-	err = ubi_eba_init_scan(ubi, si);
-	if (err)
-		goto out_vtbl;
+	/*
+	 * Here we are using size of the entire flash chip and
+	 * not just the MTD partition size because the maximum
+	 * number of bad eraseblocks is a percentage of the
+	 * whole device and bad eraseblocks are not fairly
+	 * distributed over the flash chip. So the worst case
+	 * is that all the bad eraseblocks of the chip are in
+	 * the MTD partition we are attaching (ubi->mtd).
+	 */
+	device_size = mtd_get_device_size(ubi->mtd);
+	device_pebs = mtd_div_by_eb(device_size, ubi->mtd);
+	limit = mult_frac(device_pebs, max_beb_per1024, 1024);
 
-	err = ubi_wl_init_scan(ubi, si);
-	if (err)
-		goto out_eba;
+	/* Round it up */
+	if (mult_frac(limit, 1024, max_beb_per1024) < device_pebs)
+		limit += 1;
 
-	ubi_scan_destroy_si(si);
-	return 0;
-
-out_eba:
-	ubi_eba_close(ubi);
-out_vtbl:
-	vfree(ubi->vtbl);
-out_si:
-	ubi_scan_destroy_si(si);
-	return err;
+	return limit;
 }
 
 /**
- * io_init - initialize I/O unit for a given UBI device.
+ * io_init - initialize I/O sub-system for a given UBI device.
  * @ubi: UBI device description object
+ * @max_beb_per1024: maximum expected number of bad PEB per 1024 PEBs
  *
  * If @ubi->vid_hdr_offset or @ubi->leb_start is zero, default offsets are
  * assumed:
@@ -499,8 +660,11 @@ out_si:
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-static int io_init(struct ubi_device *ubi)
+static int io_init(struct ubi_device *ubi, int max_beb_per1024)
 {
+	dbg_gen("sizeof(struct ubi_ainf_peb) %zu", sizeof(struct ubi_ainf_peb));
+	dbg_gen("sizeof(struct ubi_wl_entry) %zu", sizeof(struct ubi_wl_entry));
+
 	if (ubi->mtd->numeraseregions != 0) {
 		/*
 		 * Some flashes have several erase regions. Different regions
@@ -527,8 +691,15 @@ static int io_init(struct ubi_device *ubi)
 	ubi->peb_count  = mtd_div_by_eb(ubi->mtd->size, ubi->mtd);
 	ubi->flash_size = ubi->mtd->size;
 
-	if (mtd_can_have_bb(ubi->mtd))
+	if (mtd_can_have_bb(ubi->mtd)) {
 		ubi->bad_allowed = 1;
+		ubi->bad_peb_limit = get_bad_peb_limit(ubi, max_beb_per1024);
+	}
+
+	if (ubi->mtd->type == MTD_NORFLASH) {
+		ubi_assert(ubi->mtd->writesize == 1);
+		ubi->nor_flash = 1;
+	}
 
 	ubi->min_io_size = ubi->mtd->writesize;
 	ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft;
@@ -548,14 +719,28 @@ static int io_init(struct ubi_device *ubi)
 	ubi_assert(ubi->hdrs_min_io_size <= ubi->min_io_size);
 	ubi_assert(ubi->min_io_size % ubi->hdrs_min_io_size == 0);
 
+	ubi->max_write_size = ubi->mtd->writebufsize;
+	/*
+	 * Maximum write size has to be greater or equivalent to min. I/O
+	 * size, and be multiple of min. I/O size.
+	 */
+	if (ubi->max_write_size < ubi->min_io_size ||
+	    ubi->max_write_size % ubi->min_io_size ||
+	    !is_power_of_2(ubi->max_write_size)) {
+		ubi_err("bad write buffer size %d for %d min. I/O unit",
+			ubi->max_write_size, ubi->min_io_size);
+		return -EINVAL;
+	}
+
 	/* Calculate default aligned sizes of EC and VID headers */
 	ubi->ec_hdr_alsize = ALIGN(UBI_EC_HDR_SIZE, ubi->hdrs_min_io_size);
 	ubi->vid_hdr_alsize = ALIGN(UBI_VID_HDR_SIZE, ubi->hdrs_min_io_size);
 
-	dbg_msg("min_io_size      %d", ubi->min_io_size);
-	dbg_msg("hdrs_min_io_size %d", ubi->hdrs_min_io_size);
-	dbg_msg("ec_hdr_alsize    %d", ubi->ec_hdr_alsize);
-	dbg_msg("vid_hdr_alsize   %d", ubi->vid_hdr_alsize);
+	dbg_gen("min_io_size      %d", ubi->min_io_size);
+	dbg_gen("max_write_size   %d", ubi->max_write_size);
+	dbg_gen("hdrs_min_io_size %d", ubi->hdrs_min_io_size);
+	dbg_gen("ec_hdr_alsize    %d", ubi->ec_hdr_alsize);
+	dbg_gen("vid_hdr_alsize   %d", ubi->vid_hdr_alsize);
 
 	if (ubi->vid_hdr_offset == 0)
 		/* Default offset */
@@ -569,13 +754,13 @@ static int io_init(struct ubi_device *ubi)
 	}
 
 	/* Similar for the data offset */
-	ubi->leb_start = ubi->vid_hdr_offset + UBI_EC_HDR_SIZE;
+	ubi->leb_start = ubi->vid_hdr_offset + UBI_VID_HDR_SIZE;
 	ubi->leb_start = ALIGN(ubi->leb_start, ubi->min_io_size);
 
-	dbg_msg("vid_hdr_offset   %d", ubi->vid_hdr_offset);
-	dbg_msg("vid_hdr_aloffset %d", ubi->vid_hdr_aloffset);
-	dbg_msg("vid_hdr_shift    %d", ubi->vid_hdr_shift);
-	dbg_msg("leb_start        %d", ubi->leb_start);
+	dbg_gen("vid_hdr_offset   %d", ubi->vid_hdr_offset);
+	dbg_gen("vid_hdr_aloffset %d", ubi->vid_hdr_aloffset);
+	dbg_gen("vid_hdr_shift    %d", ubi->vid_hdr_shift);
+	dbg_gen("leb_start        %d", ubi->leb_start);
 
 	/* The shift must be aligned to 32-bit boundary */
 	if (ubi->vid_hdr_shift % 4) {
@@ -595,41 +780,38 @@ static int io_init(struct ubi_device *ubi)
 	}
 
 	/*
+	 * Set maximum amount of physical erroneous eraseblocks to be 10%.
+	 * Erroneous PEB are those which have read errors.
+	 */
+	ubi->max_erroneous = ubi->peb_count / 10;
+	if (ubi->max_erroneous < 16)
+		ubi->max_erroneous = 16;
+	dbg_gen("max_erroneous    %d", ubi->max_erroneous);
+
+	/*
 	 * It may happen that EC and VID headers are situated in one minimal
 	 * I/O unit. In this case we can only accept this UBI image in
 	 * read-only mode.
 	 */
 	if (ubi->vid_hdr_offset + UBI_VID_HDR_SIZE <= ubi->hdrs_min_io_size) {
-		ubi_warn("EC and VID headers are in the same minimal I/O unit, "
-			 "switch to read-only mode");
+		ubi_warn("EC and VID headers are in the same minimal I/O unit, switch to read-only mode");
 		ubi->ro_mode = 1;
 	}
 
 	ubi->leb_size = ubi->peb_size - ubi->leb_start;
 
 	if (!(ubi->mtd->flags & MTD_WRITEABLE)) {
-		ubi_msg("MTD device %d is write-protected, attach in "
-			"read-only mode", ubi->mtd->index);
+		ubi_msg("MTD device %d is write-protected, attach in read-only mode",
+			ubi->mtd->index);
 		ubi->ro_mode = 1;
 	}
 
-	ubi_msg("physical eraseblock size:   %d bytes (%d KiB)",
-		ubi->peb_size, ubi->peb_size >> 10);
-	ubi_msg("logical eraseblock size:    %d bytes", ubi->leb_size);
-	ubi_msg("smallest flash I/O unit:    %d", ubi->min_io_size);
-	if (ubi->hdrs_min_io_size != ubi->min_io_size)
-		ubi_msg("sub-page size:              %d",
-			ubi->hdrs_min_io_size);
-	ubi_msg("VID header offset:          %d (aligned %d)",
-		ubi->vid_hdr_offset, ubi->vid_hdr_aloffset);
-	ubi_msg("data offset:                %d", ubi->leb_start);
-
 	/*
-	 * Note, ideally, we have to initialize ubi->bad_peb_count here. But
+	 * Note, ideally, we have to initialize @ubi->bad_peb_count here. But
 	 * unfortunately, MTD does not provide this information. We should loop
 	 * over all physical eraseblocks and invoke mtd->block_is_bad() for
-	 * each physical eraseblock. So, we skip ubi->bad_peb_count
-	 * uninitialized and initialize it after scanning.
+	 * each physical eraseblock. So, we leave @ubi->bad_peb_count
+	 * uninitialized so far.
 	 */
 
 	return 0;
@@ -640,7 +822,7 @@ static int io_init(struct ubi_device *ubi)
  * @ubi: UBI device description object
  * @vol_id: ID of the volume to re-size
  *
- * This function re-sizes the volume marked by the @UBI_VTBL_AUTORESIZE_FLG in
+ * This function re-sizes the volume marked by the %UBI_VTBL_AUTORESIZE_FLG in
  * the volume table to the largest possible size. See comments in ubi-header.h
  * for more description of the flag. Returns zero in case of success and a
  * negative error code in case of failure.
@@ -651,9 +833,14 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 	struct ubi_volume *vol = ubi->volumes[vol_id];
 	int err, old_reserved_pebs = vol->reserved_pebs;
 
+	if (ubi->ro_mode) {
+		ubi_warn("skip auto-resize because of R/O mode");
+		return 0;
+	}
+
 	/*
 	 * Clear the auto-resize flag in the volume in-memory copy of the
-	 * volume table, and 'ubi_resize_volume()' will propogate this change
+	 * volume table, and 'ubi_resize_volume()' will propagate this change
 	 * to the flash.
 	 */
 	ubi->vtbl[vol_id].flags &= ~UBI_VTBL_AUTORESIZE_FLG;
@@ -662,11 +849,10 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 		struct ubi_vtbl_record vtbl_rec;
 
 		/*
-		 * No avalilable PEBs to re-size the volume, clear the flag on
+		 * No available PEBs to re-size the volume, clear the flag on
 		 * flash and exit.
 		 */
-		memcpy(&vtbl_rec, &ubi->vtbl[vol_id],
-		       sizeof(struct ubi_vtbl_record));
+		vtbl_rec = ubi->vtbl[vol_id];
 		err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
 		if (err)
 			ubi_err("cannot clean auto-resize flag for volume %d",
@@ -689,23 +875,31 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 
 /**
  * ubi_attach_mtd_dev - attach an MTD device.
- * @mtd_dev: MTD device description object
+ * @mtd: MTD device description object
  * @ubi_num: number to assign to the new UBI device
  * @vid_hdr_offset: VID header offset
+ * @max_beb_per1024: maximum expected number of bad PEB per 1024 PEBs
  *
  * This function attaches MTD device @mtd_dev to UBI and assign @ubi_num number
  * to the newly created UBI device, unless @ubi_num is %UBI_DEV_NUM_AUTO, in
- * which case this function finds a vacant device nubert and assings it
+ * which case this function finds a vacant device number and assigns it
  * automatically. Returns the new UBI device number in case of success and a
  * negative error code in case of failure.
  *
  * Note, the invocations of this function has to be serialized by the
  * @ubi_devices_mutex.
  */
-int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
+int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
+		       int vid_hdr_offset, int max_beb_per1024)
 {
 	struct ubi_device *ubi;
-	int i, err;
+	int i, err, ref = 0;
+
+	if (max_beb_per1024 < 0 || max_beb_per1024 > MAX_MTD_UBI_BEB_LIMIT)
+		return -EINVAL;
+
+	if (!max_beb_per1024)
+		max_beb_per1024 = CONFIG_MTD_UBI_BEB_LIMIT;
 
 	/*
 	 * Check if we already have the same MTD device attached.
@@ -716,7 +910,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	for (i = 0; i < UBI_MAX_DEVICES; i++) {
 		ubi = ubi_devices[i];
 		if (ubi && mtd->index == ubi->mtd->index) {
-			dbg_err("mtd%d is already attached to ubi%d",
+			ubi_err("mtd%d is already attached to ubi%d",
 				mtd->index, i);
 			return -EEXIST;
 		}
@@ -731,8 +925,8 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	 * no sense to attach emulated MTD devices, so we prohibit this.
 	 */
 	if (mtd->type == MTD_UBIVOLUME) {
-		ubi_err("refuse attaching mtd%d - it is already emulated on "
-			"top of UBI", mtd->index);
+		ubi_err("refuse attaching mtd%d - it is already emulated on top of UBI",
+			mtd->index);
 		return -EINVAL;
 	}
 
@@ -742,7 +936,8 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 			if (!ubi_devices[ubi_num])
 				break;
 		if (ubi_num == UBI_MAX_DEVICES) {
-			dbg_err("only %d UBI devices may be created", UBI_MAX_DEVICES);
+			ubi_err("only %d UBI devices may be created",
+				UBI_MAX_DEVICES);
 			return -ENFILE;
 		}
 	} else {
@@ -751,7 +946,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 
 		/* Make sure ubi_num is not busy */
 		if (ubi_devices[ubi_num]) {
-			dbg_err("ubi%d already exists", ubi_num);
+			ubi_err("ubi%d already exists", ubi_num);
 			return -EEXIST;
 		}
 	}
@@ -765,36 +960,61 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	ubi->vid_hdr_offset = vid_hdr_offset;
 	ubi->autoresize_vol_id = -1;
 
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	ubi->fm_pool.used = ubi->fm_pool.size = 0;
+	ubi->fm_wl_pool.used = ubi->fm_wl_pool.size = 0;
+
+	/*
+	 * fm_pool.max_size is 5% of the total number of PEBs but it's also
+	 * between UBI_FM_MAX_POOL_SIZE and UBI_FM_MIN_POOL_SIZE.
+	 */
+	ubi->fm_pool.max_size = min(((int)mtd_div_by_eb(ubi->mtd->size,
+		ubi->mtd) / 100) * 5, UBI_FM_MAX_POOL_SIZE);
+	if (ubi->fm_pool.max_size < UBI_FM_MIN_POOL_SIZE)
+		ubi->fm_pool.max_size = UBI_FM_MIN_POOL_SIZE;
+
+	ubi->fm_wl_pool.max_size = UBI_FM_WL_POOL_SIZE;
+	ubi->fm_disabled = !fm_autoconvert;
+
+	if (!ubi->fm_disabled && (int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd)
+	    <= UBI_FM_MAX_START) {
+		ubi_err("More than %i PEBs are needed for fastmap, sorry.",
+			UBI_FM_MAX_START);
+		ubi->fm_disabled = 1;
+	}
+
+	ubi_msg("default fastmap pool size: %d", ubi->fm_pool.max_size);
+	ubi_msg("default fastmap WL pool size: %d", ubi->fm_wl_pool.max_size);
+#else
+	ubi->fm_disabled = 1;
+#endif
 	mutex_init(&ubi->buf_mutex);
 	mutex_init(&ubi->ckvol_mutex);
-	mutex_init(&ubi->volumes_mutex);
+	mutex_init(&ubi->device_mutex);
 	spin_lock_init(&ubi->volumes_lock);
+	mutex_init(&ubi->fm_mutex);
+	init_rwsem(&ubi->fm_sem);
 
 	ubi_msg("attaching mtd%d to ubi%d", mtd->index, ubi_num);
 
-	err = io_init(ubi);
+	err = io_init(ubi, max_beb_per1024);
 	if (err)
 		goto out_free;
 
 	err = -ENOMEM;
-	ubi->peb_buf1 = vmalloc(ubi->peb_size);
-	if (!ubi->peb_buf1)
+	ubi->peb_buf = vmalloc(ubi->peb_size);
+	if (!ubi->peb_buf)
 		goto out_free;
 
-	ubi->peb_buf2 = vmalloc(ubi->peb_size);
-	if (!ubi->peb_buf2)
-		goto out_free;
-
-#ifdef CONFIG_MTD_UBI_DEBUG
-	mutex_init(&ubi->dbg_buf_mutex);
-	ubi->dbg_peb_buf = vmalloc(ubi->peb_size);
-	if (!ubi->dbg_peb_buf)
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	ubi->fm_size = ubi_calc_fm_size(ubi);
+	ubi->fm_buf = vzalloc(ubi->fm_size);
+	if (!ubi->fm_buf)
 		goto out_free;
 #endif
-
-	err = attach_by_scanning(ubi);
+	err = ubi_attach(ubi, 0);
 	if (err) {
-		dbg_err("failed to attach by scanning, error %d", err);
+		ubi_err("failed to attach mtd%d, error %d", mtd->index, err);
 		goto out_free;
 	}
 
@@ -804,56 +1024,71 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 			goto out_detach;
 	}
 
-	err = uif_init(ubi);
+	err = uif_init(ubi, &ref);
 	if (err)
 		goto out_detach;
 
-	ubi->bgt_thread = kthread_create(ubi_thread, ubi, ubi->bgt_name);
+	err = ubi_debugfs_init_dev(ubi);
+	if (err)
+		goto out_uif;
+
+	ubi->bgt_thread = kthread_create(ubi_thread, ubi, "%s", ubi->bgt_name);
 	if (IS_ERR(ubi->bgt_thread)) {
 		err = PTR_ERR(ubi->bgt_thread);
 		ubi_err("cannot spawn \"%s\", error %d", ubi->bgt_name,
 			err);
-		goto out_uif;
+		goto out_debugfs;
 	}
 
-	ubi_msg("attached mtd%d to ubi%d", mtd->index, ubi_num);
-	ubi_msg("MTD device name:            \"%s\"", mtd->name);
-	ubi_msg("MTD device size:            %llu MiB", ubi->flash_size >> 20);
-	ubi_msg("number of good PEBs:        %d", ubi->good_peb_count);
-	ubi_msg("number of bad PEBs:         %d", ubi->bad_peb_count);
-	ubi_msg("max. allowed volumes:       %d", ubi->vtbl_slots);
-	ubi_msg("wear-leveling threshold:    %d", CONFIG_MTD_UBI_WL_THRESHOLD);
-	ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT);
-	ubi_msg("number of user volumes:     %d",
-		ubi->vol_count - UBI_INT_VOL_COUNT);
-	ubi_msg("available PEBs:             %d", ubi->avail_pebs);
-	ubi_msg("total number of reserved PEBs: %d", ubi->rsvd_pebs);
-	ubi_msg("number of PEBs reserved for bad PEB handling: %d",
-		ubi->beb_rsvd_pebs);
-	ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
-
-	/* Enable the background thread */
-	if (!DBG_DISABLE_BGT) {
-		ubi->thread_enabled = 1;
-		wake_up_process(ubi->bgt_thread);
-	}
+	ubi_msg("attached mtd%d (name \"%s\", size %llu MiB) to ubi%d",
+		mtd->index, mtd->name, ubi->flash_size >> 20, ubi_num);
+	ubi_msg("PEB size: %d bytes (%d KiB), LEB size: %d bytes",
+		ubi->peb_size, ubi->peb_size >> 10, ubi->leb_size);
+	ubi_msg("min./max. I/O unit sizes: %d/%d, sub-page size %d",
+		ubi->min_io_size, ubi->max_write_size, ubi->hdrs_min_io_size);
+	ubi_msg("VID header offset: %d (aligned %d), data offset: %d",
+		ubi->vid_hdr_offset, ubi->vid_hdr_aloffset, ubi->leb_start);
+	ubi_msg("good PEBs: %d, bad PEBs: %d, corrupted PEBs: %d",
+		ubi->good_peb_count, ubi->bad_peb_count, ubi->corr_peb_count);
+	ubi_msg("user volume: %d, internal volumes: %d, max. volumes count: %d",
+		ubi->vol_count - UBI_INT_VOL_COUNT, UBI_INT_VOL_COUNT,
+		ubi->vtbl_slots);
+	ubi_msg("max/mean erase counter: %d/%d, WL threshold: %d, image sequence number: %u",
+		ubi->max_ec, ubi->mean_ec, CONFIG_MTD_UBI_WL_THRESHOLD,
+		ubi->image_seq);
+	ubi_msg("available PEBs: %d, total reserved PEBs: %d, PEBs reserved for bad PEB handling: %d",
+		ubi->avail_pebs, ubi->rsvd_pebs, ubi->beb_rsvd_pebs);
+
+	/*
+	 * The below lock makes sure we do not race with 'ubi_thread()' which
+	 * checks @ubi->thread_enabled. Otherwise we may fail to wake it up.
+	 */
+	spin_lock(&ubi->wl_lock);
+	ubi->thread_enabled = 1;
+	wake_up_process(ubi->bgt_thread);
+	spin_unlock(&ubi->wl_lock);
 
 	ubi_devices[ubi_num] = ubi;
+	ubi_notify_all(ubi, UBI_VOLUME_ADDED, NULL);
 	return ubi_num;
 
+out_debugfs:
+	ubi_debugfs_exit_dev(ubi);
 out_uif:
+	get_device(&ubi->dev);
+	ubi_assert(ref);
 	uif_close(ubi);
 out_detach:
-	ubi_eba_close(ubi);
 	ubi_wl_close(ubi);
+	ubi_free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 out_free:
-	vfree(ubi->peb_buf1);
-	vfree(ubi->peb_buf2);
-#ifdef CONFIG_MTD_UBI_DEBUG
-	vfree(ubi->dbg_peb_buf);
-#endif
-	kfree(ubi);
+	vfree(ubi->peb_buf);
+	vfree(ubi->fm_buf);
+	if (ref)
+		put_device(&ubi->dev);
+	else
+		kfree(ubi);
 	return err;
 }
 
@@ -877,13 +1112,13 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 	if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES)
 		return -EINVAL;
 
-	spin_lock(&ubi_devices_lock);
-	ubi = ubi_devices[ubi_num];
-	if (!ubi) {
-		spin_unlock(&ubi_devices_lock);
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
 		return -EINVAL;
-	}
 
+	spin_lock(&ubi_devices_lock);
+	put_device(&ubi->dev);
+	ubi->ref_count -= 1;
 	if (ubi->ref_count) {
 		if (!anyway) {
 			spin_unlock(&ubi_devices_lock);
@@ -897,8 +1132,13 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 	spin_unlock(&ubi_devices_lock);
 
 	ubi_assert(ubi_num == ubi->ubi_num);
-	dbg_msg("detaching mtd%d from ubi%d", ubi->mtd->index, ubi_num);
-
+	ubi_notify_all(ubi, UBI_VOLUME_REMOVED, NULL);
+	ubi_msg("detaching mtd%d from ubi%d", ubi->mtd->index, ubi_num);
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	/* If we don't write a new fastmap at detach time we lose all
+	 * EC updates that have been made since the last written fastmap. */
+	ubi_update_fastmap(ubi);
+#endif
 	/*
 	 * Before freeing anything, we have to stop the background thread to
 	 * prevent it from doing anything on this device while we are freeing.
@@ -906,29 +1146,73 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 	if (ubi->bgt_thread)
 		kthread_stop(ubi->bgt_thread);
 
+	/*
+	 * Get a reference to the device in order to prevent 'dev_release()'
+	 * from freeing the @ubi object.
+	 */
+	get_device(&ubi->dev);
+
+	ubi_debugfs_exit_dev(ubi);
 	uif_close(ubi);
-	ubi_eba_close(ubi);
+
 	ubi_wl_close(ubi);
+	ubi_free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 	put_mtd_device(ubi->mtd);
-	vfree(ubi->peb_buf1);
-	vfree(ubi->peb_buf2);
-#ifdef CONFIG_MTD_UBI_DEBUG
-	vfree(ubi->dbg_peb_buf);
-#endif
+	vfree(ubi->peb_buf);
+	vfree(ubi->fm_buf);
 	ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num);
-	kfree(ubi);
+	put_device(&ubi->dev);
 	return 0;
 }
 
+#ifndef __UBOOT__
 /**
- * find_mtd_device - open an MTD device by its name or number.
- * @mtd_dev: name or number of the device
+ * open_mtd_by_chdev - open an MTD device by its character device node path.
+ * @mtd_dev: MTD character device node path
+ *
+ * This helper function opens an MTD device by its character node device path.
+ * Returns MTD device description object in case of success and a negative
+ * error code in case of failure.
+ */
+static struct mtd_info * __init open_mtd_by_chdev(const char *mtd_dev)
+{
+	int err, major, minor, mode;
+	struct path path;
+
+	/* Probably this is an MTD character device node path */
+	err = kern_path(mtd_dev, LOOKUP_FOLLOW, &path);
+	if (err)
+		return ERR_PTR(err);
+
+	/* MTD device number is defined by the major / minor numbers */
+	major = imajor(path.dentry->d_inode);
+	minor = iminor(path.dentry->d_inode);
+	mode = path.dentry->d_inode->i_mode;
+	path_put(&path);
+	if (major != MTD_CHAR_MAJOR || !S_ISCHR(mode))
+		return ERR_PTR(-EINVAL);
+
+	if (minor & 1)
+		/*
+		 * Just do not think the "/dev/mtdrX" devices support is need,
+		 * so do not support them to avoid doing extra work.
+		 */
+		return ERR_PTR(-EINVAL);
+
+	return get_mtd_device(NULL, minor / 2);
+}
+#endif
+
+/**
+ * open_mtd_device - open MTD device by name, character device path, or number.
+ * @mtd_dev: name, character device node path, or MTD device device number
  *
  * This function tries to open and MTD device described by @mtd_dev string,
- * which is first treated as an ASCII number, and if it is not true, it is
- * treated as MTD device name. Returns MTD device description object in case of
- * success and a negative error code in case of failure.
+ * which is first treated as ASCII MTD device number, and if it is not true, it
+ * is treated as MTD device name, and if that is also not true, it is treated
+ * as MTD character device node path. Returns MTD device description object in
+ * case of success and a negative error code in case of failure.
  */
 static struct mtd_info * __init open_mtd_device(const char *mtd_dev)
 {
@@ -943,13 +1227,22 @@ static struct mtd_info * __init open_mtd_device(const char *mtd_dev)
 		 * MTD device name.
 		 */
 		mtd = get_mtd_device_nm(mtd_dev);
+#ifndef __UBOOT__
+		if (IS_ERR(mtd) && PTR_ERR(mtd) == -ENODEV)
+			/* Probably this is an MTD character device node path */
+			mtd = open_mtd_by_chdev(mtd_dev);
+#endif
 	} else
 		mtd = get_mtd_device(NULL, mtd_num);
 
 	return mtd;
 }
 
-int __init ubi_init(void)
+#ifndef __UBOOT__
+static int __init ubi_init(void)
+#else
+int ubi_init(void)
+#endif
 {
 	int err, i, k;
 
@@ -982,13 +1275,18 @@ int __init ubi_init(void)
 		goto out_version;
 	}
 
-#ifdef UBI_LINUX
 	ubi_wl_entry_slab = kmem_cache_create("ubi_wl_entry_slab",
 					      sizeof(struct ubi_wl_entry),
 					      0, 0, NULL);
-	if (!ubi_wl_entry_slab)
+	if (!ubi_wl_entry_slab) {
+		err = -ENOMEM;
 		goto out_dev_unreg;
-#endif
+	}
+
+	err = ubi_debugfs_init();
+	if (err)
+		goto out_slab;
+
 
 	/* Attach MTD devices */
 	for (i = 0; i < mtd_devs; i++) {
@@ -1000,17 +1298,36 @@ int __init ubi_init(void)
 		mtd = open_mtd_device(p->name);
 		if (IS_ERR(mtd)) {
 			err = PTR_ERR(mtd);
-			goto out_detach;
+			ubi_err("cannot open mtd %s, error %d", p->name, err);
+			/* See comment below re-ubi_is_module(). */
+			if (ubi_is_module())
+				goto out_detach;
+			continue;
 		}
 
 		mutex_lock(&ubi_devices_mutex);
-		err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO,
-					 p->vid_hdr_offs);
+		err = ubi_attach_mtd_dev(mtd, p->ubi_num,
+					 p->vid_hdr_offs, p->max_beb_per1024);
 		mutex_unlock(&ubi_devices_mutex);
 		if (err < 0) {
-			put_mtd_device(mtd);
 			ubi_err("cannot attach mtd%d", mtd->index);
-			goto out_detach;
+			put_mtd_device(mtd);
+
+			/*
+			 * Originally UBI stopped initializing on any error.
+			 * However, later on it was found out that this
+			 * behavior is not very good when UBI is compiled into
+			 * the kernel and the MTD devices to attach are passed
+			 * through the command line. Indeed, UBI failure
+			 * stopped whole boot sequence.
+			 *
+			 * To fix this, we changed the behavior for the
+			 * non-module case, but preserved the old behavior for
+			 * the module case, just for compatibility. This is a
+			 * little inconsistent, though.
+			 */
+			if (ubi_is_module())
+				goto out_detach;
 		}
 	}
 
@@ -1023,23 +1340,26 @@ out_detach:
 			ubi_detach_mtd_dev(ubi_devices[k]->ubi_num, 1);
 			mutex_unlock(&ubi_devices_mutex);
 		}
-#ifdef UBI_LINUX
+	ubi_debugfs_exit();
+out_slab:
 	kmem_cache_destroy(ubi_wl_entry_slab);
 out_dev_unreg:
-#endif
 	misc_deregister(&ubi_ctrl_cdev);
 out_version:
 	class_remove_file(ubi_class, &ubi_version);
 out_class:
 	class_destroy(ubi_class);
 out:
-	mtd_devs = 0;
-	ubi_err("UBI error: cannot initialize UBI, error %d", err);
+	ubi_err("cannot initialize UBI, error %d", err);
 	return err;
 }
-module_init(ubi_init);
+late_initcall(ubi_init);
 
-void __exit ubi_exit(void)
+#ifndef __UBOOT__
+static void __exit ubi_exit(void)
+#else
+void ubi_exit(void)
+#endif
 {
 	int i;
 
@@ -1049,17 +1369,16 @@ void __exit ubi_exit(void)
 			ubi_detach_mtd_dev(ubi_devices[i]->ubi_num, 1);
 			mutex_unlock(&ubi_devices_mutex);
 		}
+	ubi_debugfs_exit();
 	kmem_cache_destroy(ubi_wl_entry_slab);
 	misc_deregister(&ubi_ctrl_cdev);
 	class_remove_file(ubi_class, &ubi_version);
 	class_destroy(ubi_class);
-	mtd_devs = 0;
 }
 module_exit(ubi_exit);
 
 /**
- * bytes_str_to_int - convert a string representing number of bytes to an
- * integer.
+ * bytes_str_to_int - convert a number of bytes string into an integer.
  * @str: the string to convert
  *
  * This function returns positive resulting integer in case of success and a
@@ -1071,9 +1390,8 @@ static int __init bytes_str_to_int(const char *str)
 	unsigned long result;
 
 	result = simple_strtoul(str, &endp, 0);
-	if (str == endp || result < 0) {
-		printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n",
-		       str);
+	if (str == endp || result >= INT_MAX) {
+		ubi_err("incorrect bytes count: \"%s\"\n", str);
 		return -EINVAL;
 	}
 
@@ -1089,14 +1407,24 @@ static int __init bytes_str_to_int(const char *str)
 	case '\0':
 		break;
 	default:
-		printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n",
-		       str);
+		ubi_err("incorrect bytes count: \"%s\"\n", str);
 		return -EINVAL;
 	}
 
 	return result;
 }
 
+int kstrtoint(const char *s, unsigned int base, int *res)
+{
+	unsigned long long tmp;
+
+	tmp = simple_strtoull(s, NULL, base);
+	if (tmp != (unsigned long long)(int)tmp)
+		return -ERANGE;
+
+	return (int)tmp;
+}
+
 /**
  * ubi_mtd_param_parse - parse the 'mtd=' UBI parameter.
  * @val: the parameter value to parse
@@ -1105,33 +1433,36 @@ static int __init bytes_str_to_int(const char *str)
  * This function returns zero in case of success and a negative error code in
  * case of error.
  */
-int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp)
+#ifndef __UBOOT__
+static int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp)
+#else
+int ubi_mtd_param_parse(const char *val, struct kernel_param *kp)
+#endif
 {
 	int i, len;
 	struct mtd_dev_param *p;
 	char buf[MTD_PARAM_LEN_MAX];
 	char *pbuf = &buf[0];
-	char *tokens[2] = {NULL, NULL};
+	char *tokens[MTD_PARAM_MAX_COUNT], *token;
 
 	if (!val)
 		return -EINVAL;
 
 	if (mtd_devs == UBI_MAX_DEVICES) {
-		printk(KERN_ERR "UBI error: too many parameters, max. is %d\n",
-		       UBI_MAX_DEVICES);
+		ubi_err("too many parameters, max. is %d\n",
+			UBI_MAX_DEVICES);
 		return -EINVAL;
 	}
 
 	len = strnlen(val, MTD_PARAM_LEN_MAX);
 	if (len == MTD_PARAM_LEN_MAX) {
-		printk(KERN_ERR "UBI error: parameter \"%s\" is too long, "
-		       "max. is %d\n", val, MTD_PARAM_LEN_MAX);
+		ubi_err("parameter \"%s\" is too long, max. is %d\n",
+			val, MTD_PARAM_LEN_MAX);
 		return -EINVAL;
 	}
 
 	if (len == 0) {
-		printk(KERN_WARNING "UBI warning: empty 'mtd=' parameter - "
-		       "ignored\n");
+		pr_warn("UBI warning: empty 'mtd=' parameter - ignored\n");
 		return 0;
 	}
 
@@ -1141,40 +1472,69 @@ int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp)
 	if (buf[len - 1] == '\n')
 		buf[len - 1] = '\0';
 
-	for (i = 0; i < 2; i++)
+	for (i = 0; i < MTD_PARAM_MAX_COUNT; i++)
 		tokens[i] = strsep(&pbuf, ",");
 
 	if (pbuf) {
-		printk(KERN_ERR "UBI error: too many arguments at \"%s\"\n",
-		       val);
+		ubi_err("too many arguments at \"%s\"\n", val);
 		return -EINVAL;
 	}
 
 	p = &mtd_dev_param[mtd_devs];
 	strcpy(&p->name[0], tokens[0]);
 
-	if (tokens[1])
-		p->vid_hdr_offs = bytes_str_to_int(tokens[1]);
+	token = tokens[1];
+	if (token) {
+		p->vid_hdr_offs = bytes_str_to_int(token);
+
+		if (p->vid_hdr_offs < 0)
+			return p->vid_hdr_offs;
+	}
 
-	if (p->vid_hdr_offs < 0)
-		return p->vid_hdr_offs;
+	token = tokens[2];
+	if (token) {
+		int err = kstrtoint(token, 10, &p->max_beb_per1024);
+
+		if (err) {
+			ubi_err("bad value for max_beb_per1024 parameter: %s",
+				token);
+			return -EINVAL;
+		}
+	}
+
+	token = tokens[3];
+	if (token) {
+		int err = kstrtoint(token, 10, &p->ubi_num);
+
+		if (err) {
+			ubi_err("bad value for ubi_num parameter: %s", token);
+			return -EINVAL;
+		}
+	} else
+		p->ubi_num = UBI_DEV_NUM_AUTO;
 
 	mtd_devs += 1;
 	return 0;
 }
 
 module_param_call(mtd, ubi_mtd_param_parse, NULL, NULL, 000);
-MODULE_PARM_DESC(mtd, "MTD devices to attach. Parameter format: "
-		      "mtd=<name|num>[,<vid_hdr_offs>].\n"
+MODULE_PARM_DESC(mtd, "MTD devices to attach. Parameter format: mtd=<name|num|path>[,<vid_hdr_offs>[,max_beb_per1024[,ubi_num]]].\n"
 		      "Multiple \"mtd\" parameters may be specified.\n"
-		      "MTD devices may be specified by their number or name.\n"
-		      "Optional \"vid_hdr_offs\" parameter specifies UBI VID "
-		      "header position and data starting position to be used "
-		      "by UBI.\n"
-		      "Example: mtd=content,1984 mtd=4 - attach MTD device"
-		      "with name \"content\" using VID header offset 1984, and "
-		      "MTD device number 4 with default VID header offset.");
-
+		      "MTD devices may be specified by their number, name, or path to the MTD character device node.\n"
+		      "Optional \"vid_hdr_offs\" parameter specifies UBI VID header position to be used by UBI. (default value if 0)\n"
+		      "Optional \"max_beb_per1024\" parameter specifies the maximum expected bad eraseblock per 1024 eraseblocks. (default value ("
+		      __stringify(CONFIG_MTD_UBI_BEB_LIMIT) ") if 0)\n"
+		      "Optional \"ubi_num\" parameter specifies UBI device number which have to be assigned to the newly created UBI device (assigned automatically by default)\n"
+		      "\n"
+		      "Example 1: mtd=/dev/mtd0 - attach MTD device /dev/mtd0.\n"
+		      "Example 2: mtd=content,1984 mtd=4 - attach MTD device with name \"content\" using VID header offset 1984, and MTD device number 4 with default VID header offset.\n"
+		      "Example 3: mtd=/dev/mtd1,0,25 - attach MTD device /dev/mtd1 using default VID header offset and reserve 25*nand_size_in_blocks/1024 erase blocks for bad block handling.\n"
+		      "Example 4: mtd=/dev/mtd1,0,0,5 - attach MTD device /dev/mtd1 to UBI 5 and using default values for the other fields.\n"
+		      "\t(e.g. if the NAND *chipset* has 4096 PEB, 100 will be reserved for this UBI device).");
+#ifdef CONFIG_MTD_UBI_FASTMAP
+module_param(fm_autoconvert, bool, 0644);
+MODULE_PARM_DESC(fm_autoconvert, "Set this parameter to enable fastmap automatically on images without a fastmap.");
+#endif
 MODULE_VERSION(__stringify(UBI_VERSION));
 MODULE_DESCRIPTION("UBI - Unsorted Block Images");
 MODULE_AUTHOR("Artem Bityutskiy");
diff --git a/drivers/mtd/ubi/crc32.c b/drivers/mtd/ubi/crc32.c
index f1bebf5..0d65bf4 100644
--- a/drivers/mtd/ubi/crc32.c
+++ b/drivers/mtd/ubi/crc32.c
@@ -20,7 +20,8 @@
  * Version 2.  See the file COPYING for more details.
  */
 
-#ifdef UBI_LINUX
+#define __UBOOT__
+#ifndef __UBOOT__
 #include <linux/crc32.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -30,7 +31,7 @@
 
 #include <asm/byteorder.h>
 
-#ifdef UBI_LINUX
+#ifndef __UBOOT__
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <asm/atomic.h>
@@ -46,7 +47,7 @@
 #define tobe(x) (x)
 #endif
 #include "crc32table.h"
-#ifdef UBI_LINUX
+#ifndef __UBOOT__
 MODULE_AUTHOR("Matt Domsch <Matt_Domsch at dell.com>");
 MODULE_DESCRIPTION("Ethernet CRC32 calculations");
 MODULE_LICENSE("GPL");
@@ -146,7 +147,7 @@ u32 crc32_le(u32 crc, unsigned char const *p, size_t len)
 # endif
 }
 #endif
-#ifdef UBI_LINUX
+#ifndef __UBOOT__
 /**
  * crc32_be() - Calculate bitwise big-endian Ethernet AUTODIN II CRC32
  * @crc: seed value for computation.  ~0 for Ethernet, sometimes 0 for
@@ -379,7 +380,7 @@ EXPORT_SYMBOL(crc32_be);
 #include <stdlib.h>
 #include <stdio.h>
 
-#ifdef UBI_LINUX				/*Not used at present */
+#ifndef __UBOOT__
 static void
 buf_dump(char const *prefix, unsigned char const *buf, size_t len)
 {
@@ -405,7 +406,7 @@ static void random_garbage(unsigned char *buf, size_t len)
 		*buf++ = (unsigned char) random();
 }
 
-#ifdef UBI_LINUX				/* Not used at present */
+#ifndef __UBOOT__
 static void store_le(u32 x, unsigned char *buf)
 {
 	buf[0] = (unsigned char) x;
diff --git a/drivers/mtd/ubi/crc32table.h b/drivers/mtd/ubi/crc32table.h
index 0438af4..02ce6fd 100644
--- a/drivers/mtd/ubi/crc32table.h
+++ b/drivers/mtd/ubi/crc32table.h
@@ -66,7 +66,7 @@ tole(0xbad03605L), tole(0xcdd70693L), tole(0x54de5729L), tole(0x23d967bfL),
 tole(0xb3667a2eL), tole(0xc4614ab8L), tole(0x5d681b02L), tole(0x2a6f2b94L),
 tole(0xb40bbe37L), tole(0xc30c8ea1L), tole(0x5a05df1bL), tole(0x2d02ef8dL)
 };
-#ifdef UBI_LINUX
+#ifndef __UBOOT__
 static const u32 crc32table_be[] = {
 tobe(0x00000000L), tobe(0x04c11db7L), tobe(0x09823b6eL), tobe(0x0d4326d9L),
 tobe(0x130476dcL), tobe(0x17c56b6bL), tobe(0x1a864db2L), tobe(0x1e475005L),
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index 6c22301..af254da 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -6,175 +6,455 @@
  * Author: Artem Bityutskiy (Битюцкий Артём)
  */
 
-/*
- * Here we keep all the UBI debugging stuff which should normally be disabled
- * and compiled-out, but it is extremely helpful when hunting bugs or doing big
- * changes.
- */
 #include <ubi_uboot.h>
+#include "ubi.h"
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#endif
 
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG
+/**
+ * ubi_dump_flash - dump a region of flash.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock number to dump
+ * @offset: the starting offset within the physical eraseblock to dump
+ * @len: the length of the region to dump
+ */
+void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len)
+{
+	int err;
+	size_t read;
+	void *buf;
+	loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
 
-#include "ubi.h"
+	buf = vmalloc(len);
+	if (!buf)
+		return;
+	err = mtd_read(ubi->mtd, addr, len, &read, buf);
+	if (err && err != -EUCLEAN) {
+		ubi_err("error %d while reading %d bytes from PEB %d:%d, read %zd bytes",
+			err, len, pnum, offset, read);
+		goto out;
+	}
+
+	ubi_msg("dumping %d bytes of data from PEB %d, offset %d",
+		len, pnum, offset);
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
+out:
+	vfree(buf);
+	return;
+}
 
 /**
- * ubi_dbg_dump_ec_hdr - dump an erase counter header.
+ * ubi_dump_ec_hdr - dump an erase counter header.
  * @ec_hdr: the erase counter header to dump
  */
-void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
-{
-	dbg_msg("erase counter header dump:");
-	dbg_msg("magic          %#08x", be32_to_cpu(ec_hdr->magic));
-	dbg_msg("version        %d",    (int)ec_hdr->version);
-	dbg_msg("ec             %llu",  (long long)be64_to_cpu(ec_hdr->ec));
-	dbg_msg("vid_hdr_offset %d",    be32_to_cpu(ec_hdr->vid_hdr_offset));
-	dbg_msg("data_offset    %d",    be32_to_cpu(ec_hdr->data_offset));
-	dbg_msg("hdr_crc        %#08x", be32_to_cpu(ec_hdr->hdr_crc));
-	dbg_msg("erase counter header hexdump:");
+void ubi_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
+{
+	pr_err("Erase counter header dump:\n");
+	pr_err("\tmagic          %#08x\n", be32_to_cpu(ec_hdr->magic));
+	pr_err("\tversion        %d\n", (int)ec_hdr->version);
+	pr_err("\tec             %llu\n", (long long)be64_to_cpu(ec_hdr->ec));
+	pr_err("\tvid_hdr_offset %d\n", be32_to_cpu(ec_hdr->vid_hdr_offset));
+	pr_err("\tdata_offset    %d\n", be32_to_cpu(ec_hdr->data_offset));
+	pr_err("\timage_seq      %d\n", be32_to_cpu(ec_hdr->image_seq));
+	pr_err("\thdr_crc        %#08x\n", be32_to_cpu(ec_hdr->hdr_crc));
+	pr_err("erase counter header hexdump:\n");
 	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
 		       ec_hdr, UBI_EC_HDR_SIZE, 1);
 }
 
 /**
- * ubi_dbg_dump_vid_hdr - dump a volume identifier header.
+ * ubi_dump_vid_hdr - dump a volume identifier header.
  * @vid_hdr: the volume identifier header to dump
  */
-void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
-{
-	dbg_msg("volume identifier header dump:");
-	dbg_msg("magic     %08x", be32_to_cpu(vid_hdr->magic));
-	dbg_msg("version   %d",   (int)vid_hdr->version);
-	dbg_msg("vol_type  %d",   (int)vid_hdr->vol_type);
-	dbg_msg("copy_flag %d",   (int)vid_hdr->copy_flag);
-	dbg_msg("compat    %d",   (int)vid_hdr->compat);
-	dbg_msg("vol_id    %d",   be32_to_cpu(vid_hdr->vol_id));
-	dbg_msg("lnum      %d",   be32_to_cpu(vid_hdr->lnum));
-	dbg_msg("leb_ver   %u",   be32_to_cpu(vid_hdr->leb_ver));
-	dbg_msg("data_size %d",   be32_to_cpu(vid_hdr->data_size));
-	dbg_msg("used_ebs  %d",   be32_to_cpu(vid_hdr->used_ebs));
-	dbg_msg("data_pad  %d",   be32_to_cpu(vid_hdr->data_pad));
-	dbg_msg("sqnum     %llu",
+void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
+{
+	pr_err("Volume identifier header dump:\n");
+	pr_err("\tmagic     %08x\n", be32_to_cpu(vid_hdr->magic));
+	pr_err("\tversion   %d\n",  (int)vid_hdr->version);
+	pr_err("\tvol_type  %d\n",  (int)vid_hdr->vol_type);
+	pr_err("\tcopy_flag %d\n",  (int)vid_hdr->copy_flag);
+	pr_err("\tcompat    %d\n",  (int)vid_hdr->compat);
+	pr_err("\tvol_id    %d\n",  be32_to_cpu(vid_hdr->vol_id));
+	pr_err("\tlnum      %d\n",  be32_to_cpu(vid_hdr->lnum));
+	pr_err("\tdata_size %d\n",  be32_to_cpu(vid_hdr->data_size));
+	pr_err("\tused_ebs  %d\n",  be32_to_cpu(vid_hdr->used_ebs));
+	pr_err("\tdata_pad  %d\n",  be32_to_cpu(vid_hdr->data_pad));
+	pr_err("\tsqnum     %llu\n",
 		(unsigned long long)be64_to_cpu(vid_hdr->sqnum));
-	dbg_msg("hdr_crc   %08x", be32_to_cpu(vid_hdr->hdr_crc));
-	dbg_msg("volume identifier header hexdump:");
+	pr_err("\thdr_crc   %08x\n", be32_to_cpu(vid_hdr->hdr_crc));
+	pr_err("Volume identifier header hexdump:\n");
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
+		       vid_hdr, UBI_VID_HDR_SIZE, 1);
 }
 
 /**
- * ubi_dbg_dump_vol_info- dump volume information.
+ * ubi_dump_vol_info - dump volume information.
  * @vol: UBI volume description object
  */
-void ubi_dbg_dump_vol_info(const struct ubi_volume *vol)
-{
-	dbg_msg("volume information dump:");
-	dbg_msg("vol_id          %d", vol->vol_id);
-	dbg_msg("reserved_pebs   %d", vol->reserved_pebs);
-	dbg_msg("alignment       %d", vol->alignment);
-	dbg_msg("data_pad        %d", vol->data_pad);
-	dbg_msg("vol_type        %d", vol->vol_type);
-	dbg_msg("name_len        %d", vol->name_len);
-	dbg_msg("usable_leb_size %d", vol->usable_leb_size);
-	dbg_msg("used_ebs        %d", vol->used_ebs);
-	dbg_msg("used_bytes      %lld", vol->used_bytes);
-	dbg_msg("last_eb_bytes   %d", vol->last_eb_bytes);
-	dbg_msg("corrupted       %d", vol->corrupted);
-	dbg_msg("upd_marker      %d", vol->upd_marker);
+void ubi_dump_vol_info(const struct ubi_volume *vol)
+{
+	printf("Volume information dump:\n");
+	printf("\tvol_id          %d\n", vol->vol_id);
+	printf("\treserved_pebs   %d\n", vol->reserved_pebs);
+	printf("\talignment       %d\n", vol->alignment);
+	printf("\tdata_pad        %d\n", vol->data_pad);
+	printf("\tvol_type        %d\n", vol->vol_type);
+	printf("\tname_len        %d\n", vol->name_len);
+	printf("\tusable_leb_size %d\n", vol->usable_leb_size);
+	printf("\tused_ebs        %d\n", vol->used_ebs);
+	printf("\tused_bytes      %lld\n", vol->used_bytes);
+	printf("\tlast_eb_bytes   %d\n", vol->last_eb_bytes);
+	printf("\tcorrupted       %d\n", vol->corrupted);
+	printf("\tupd_marker      %d\n", vol->upd_marker);
 
 	if (vol->name_len <= UBI_VOL_NAME_MAX &&
 	    strnlen(vol->name, vol->name_len + 1) == vol->name_len) {
-		dbg_msg("name            %s", vol->name);
+		printf("\tname            %s\n", vol->name);
 	} else {
-		dbg_msg("the 1st 5 characters of the name: %c%c%c%c%c",
-			vol->name[0], vol->name[1], vol->name[2],
-			vol->name[3], vol->name[4]);
+		printf("\t1st 5 characters of name: %c%c%c%c%c\n",
+		       vol->name[0], vol->name[1], vol->name[2],
+		       vol->name[3], vol->name[4]);
 	}
 }
 
 /**
- * ubi_dbg_dump_vtbl_record - dump a &struct ubi_vtbl_record object.
+ * ubi_dump_vtbl_record - dump a &struct ubi_vtbl_record object.
  * @r: the object to dump
  * @idx: volume table index
  */
-void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
+void ubi_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
 {
 	int name_len = be16_to_cpu(r->name_len);
 
-	dbg_msg("volume table record %d dump:", idx);
-	dbg_msg("reserved_pebs   %d", be32_to_cpu(r->reserved_pebs));
-	dbg_msg("alignment       %d", be32_to_cpu(r->alignment));
-	dbg_msg("data_pad        %d", be32_to_cpu(r->data_pad));
-	dbg_msg("vol_type        %d", (int)r->vol_type);
-	dbg_msg("upd_marker      %d", (int)r->upd_marker);
-	dbg_msg("name_len        %d", name_len);
+	pr_err("Volume table record %d dump:\n", idx);
+	pr_err("\treserved_pebs   %d\n", be32_to_cpu(r->reserved_pebs));
+	pr_err("\talignment       %d\n", be32_to_cpu(r->alignment));
+	pr_err("\tdata_pad        %d\n", be32_to_cpu(r->data_pad));
+	pr_err("\tvol_type        %d\n", (int)r->vol_type);
+	pr_err("\tupd_marker      %d\n", (int)r->upd_marker);
+	pr_err("\tname_len        %d\n", name_len);
 
 	if (r->name[0] == '\0') {
-		dbg_msg("name            NULL");
+		pr_err("\tname            NULL\n");
 		return;
 	}
 
 	if (name_len <= UBI_VOL_NAME_MAX &&
 	    strnlen(&r->name[0], name_len + 1) == name_len) {
-		dbg_msg("name            %s", &r->name[0]);
+		pr_err("\tname            %s\n", &r->name[0]);
 	} else {
-		dbg_msg("1st 5 characters of the name: %c%c%c%c%c",
+		pr_err("\t1st 5 characters of name: %c%c%c%c%c\n",
 			r->name[0], r->name[1], r->name[2], r->name[3],
 			r->name[4]);
 	}
-	dbg_msg("crc             %#08x", be32_to_cpu(r->crc));
+	pr_err("\tcrc             %#08x\n", be32_to_cpu(r->crc));
 }
 
 /**
- * ubi_dbg_dump_sv - dump a &struct ubi_scan_volume object.
- * @sv: the object to dump
+ * ubi_dump_av - dump a &struct ubi_ainf_volume object.
+ * @av: the object to dump
  */
-void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv)
+void ubi_dump_av(const struct ubi_ainf_volume *av)
 {
-	dbg_msg("volume scanning information dump:");
-	dbg_msg("vol_id         %d", sv->vol_id);
-	dbg_msg("highest_lnum   %d", sv->highest_lnum);
-	dbg_msg("leb_count      %d", sv->leb_count);
-	dbg_msg("compat         %d", sv->compat);
-	dbg_msg("vol_type       %d", sv->vol_type);
-	dbg_msg("used_ebs       %d", sv->used_ebs);
-	dbg_msg("last_data_size %d", sv->last_data_size);
-	dbg_msg("data_pad       %d", sv->data_pad);
+	pr_err("Volume attaching information dump:\n");
+	pr_err("\tvol_id         %d\n", av->vol_id);
+	pr_err("\thighest_lnum   %d\n", av->highest_lnum);
+	pr_err("\tleb_count      %d\n", av->leb_count);
+	pr_err("\tcompat         %d\n", av->compat);
+	pr_err("\tvol_type       %d\n", av->vol_type);
+	pr_err("\tused_ebs       %d\n", av->used_ebs);
+	pr_err("\tlast_data_size %d\n", av->last_data_size);
+	pr_err("\tdata_pad       %d\n", av->data_pad);
 }
 
 /**
- * ubi_dbg_dump_seb - dump a &struct ubi_scan_leb object.
- * @seb: the object to dump
+ * ubi_dump_aeb - dump a &struct ubi_ainf_peb object.
+ * @aeb: the object to dump
  * @type: object type: 0 - not corrupted, 1 - corrupted
  */
-void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type)
+void ubi_dump_aeb(const struct ubi_ainf_peb *aeb, int type)
 {
-	dbg_msg("eraseblock scanning information dump:");
-	dbg_msg("ec       %d", seb->ec);
-	dbg_msg("pnum     %d", seb->pnum);
+	pr_err("eraseblock attaching information dump:\n");
+	pr_err("\tec       %d\n", aeb->ec);
+	pr_err("\tpnum     %d\n", aeb->pnum);
 	if (type == 0) {
-		dbg_msg("lnum     %d", seb->lnum);
-		dbg_msg("scrub    %d", seb->scrub);
-		dbg_msg("sqnum    %llu", seb->sqnum);
-		dbg_msg("leb_ver  %u", seb->leb_ver);
+		pr_err("\tlnum     %d\n", aeb->lnum);
+		pr_err("\tscrub    %d\n", aeb->scrub);
+		pr_err("\tsqnum    %llu\n", aeb->sqnum);
 	}
 }
 
 /**
- * ubi_dbg_dump_mkvol_req - dump a &struct ubi_mkvol_req object.
+ * ubi_dump_mkvol_req - dump a &struct ubi_mkvol_req object.
  * @req: the object to dump
  */
-void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req)
+void ubi_dump_mkvol_req(const struct ubi_mkvol_req *req)
 {
 	char nm[17];
 
-	dbg_msg("volume creation request dump:");
-	dbg_msg("vol_id    %d",   req->vol_id);
-	dbg_msg("alignment %d",   req->alignment);
-	dbg_msg("bytes     %lld", (long long)req->bytes);
-	dbg_msg("vol_type  %d",   req->vol_type);
-	dbg_msg("name_len  %d",   req->name_len);
+	pr_err("Volume creation request dump:\n");
+	pr_err("\tvol_id    %d\n",   req->vol_id);
+	pr_err("\talignment %d\n",   req->alignment);
+	pr_err("\tbytes     %lld\n", (long long)req->bytes);
+	pr_err("\tvol_type  %d\n",   req->vol_type);
+	pr_err("\tname_len  %d\n",   req->name_len);
 
 	memcpy(nm, req->name, 16);
 	nm[16] = 0;
-	dbg_msg("the 1st 16 characters of the name: %s", nm);
+	pr_err("\t1st 16 characters of name: %s\n", nm);
 }
 
-#endif /* CONFIG_MTD_UBI_DEBUG_MSG */
+#ifndef __UBOOT__
+/*
+ * Root directory for UBI stuff in debugfs. Contains sub-directories which
+ * contain the stuff specific to particular UBI devices.
+ */
+static struct dentry *dfs_rootdir;
+
+/**
+ * ubi_debugfs_init - create UBI debugfs directory.
+ *
+ * Create UBI debugfs directory. Returns zero in case of success and a negative
+ * error code in case of failure.
+ */
+int ubi_debugfs_init(void)
+{
+	if (!IS_ENABLED(CONFIG_DEBUG_FS))
+		return 0;
+
+	dfs_rootdir = debugfs_create_dir("ubi", NULL);
+	if (IS_ERR_OR_NULL(dfs_rootdir)) {
+		int err = dfs_rootdir ? -ENODEV : PTR_ERR(dfs_rootdir);
+
+		ubi_err("cannot create \"ubi\" debugfs directory, error %d\n",
+			err);
+		return err;
+	}
+
+	return 0;
+}
+
+/**
+ * ubi_debugfs_exit - remove UBI debugfs directory.
+ */
+void ubi_debugfs_exit(void)
+{
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
+		debugfs_remove(dfs_rootdir);
+}
+
+/* Read an UBI debugfs file */
+static ssize_t dfs_file_read(struct file *file, char __user *user_buf,
+			     size_t count, loff_t *ppos)
+{
+	unsigned long ubi_num = (unsigned long)file->private_data;
+	struct dentry *dent = file->f_path.dentry;
+	struct ubi_device *ubi;
+	struct ubi_debug_info *d;
+	char buf[3];
+	int val;
+
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return -ENODEV;
+	d = &ubi->dbg;
+
+	if (dent == d->dfs_chk_gen)
+		val = d->chk_gen;
+	else if (dent == d->dfs_chk_io)
+		val = d->chk_io;
+	else if (dent == d->dfs_disable_bgt)
+		val = d->disable_bgt;
+	else if (dent == d->dfs_emulate_bitflips)
+		val = d->emulate_bitflips;
+	else if (dent == d->dfs_emulate_io_failures)
+		val = d->emulate_io_failures;
+	else {
+		count = -EINVAL;
+		goto out;
+	}
+
+	if (val)
+		buf[0] = '1';
+	else
+		buf[0] = '0';
+	buf[1] = '\n';
+	buf[2] = 0x00;
+
+	count = simple_read_from_buffer(user_buf, count, ppos, buf, 2);
+
+out:
+	ubi_put_device(ubi);
+	return count;
+}
+
+/* Write an UBI debugfs file */
+static ssize_t dfs_file_write(struct file *file, const char __user *user_buf,
+			      size_t count, loff_t *ppos)
+{
+	unsigned long ubi_num = (unsigned long)file->private_data;
+	struct dentry *dent = file->f_path.dentry;
+	struct ubi_device *ubi;
+	struct ubi_debug_info *d;
+	size_t buf_size;
+	char buf[8];
+	int val;
+
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return -ENODEV;
+	d = &ubi->dbg;
+
+	buf_size = min_t(size_t, count, (sizeof(buf) - 1));
+	if (copy_from_user(buf, user_buf, buf_size)) {
+		count = -EFAULT;
+		goto out;
+	}
+
+	if (buf[0] == '1')
+		val = 1;
+	else if (buf[0] == '0')
+		val = 0;
+	else {
+		count = -EINVAL;
+		goto out;
+	}
+
+	if (dent == d->dfs_chk_gen)
+		d->chk_gen = val;
+	else if (dent == d->dfs_chk_io)
+		d->chk_io = val;
+	else if (dent == d->dfs_disable_bgt)
+		d->disable_bgt = val;
+	else if (dent == d->dfs_emulate_bitflips)
+		d->emulate_bitflips = val;
+	else if (dent == d->dfs_emulate_io_failures)
+		d->emulate_io_failures = val;
+	else
+		count = -EINVAL;
+
+out:
+	ubi_put_device(ubi);
+	return count;
+}
+
+/* File operations for all UBI debugfs files */
+static const struct file_operations dfs_fops = {
+	.read   = dfs_file_read,
+	.write  = dfs_file_write,
+	.open	= simple_open,
+	.llseek = no_llseek,
+	.owner  = THIS_MODULE,
+};
+
+/**
+ * ubi_debugfs_init_dev - initialize debugfs for an UBI device.
+ * @ubi: UBI device description object
+ *
+ * This function creates all debugfs files for UBI device @ubi. Returns zero in
+ * case of success and a negative error code in case of failure.
+ */
+int ubi_debugfs_init_dev(struct ubi_device *ubi)
+{
+	int err, n;
+	unsigned long ubi_num = ubi->ubi_num;
+	const char *fname;
+	struct dentry *dent;
+	struct ubi_debug_info *d = &ubi->dbg;
+
+	if (!IS_ENABLED(CONFIG_DEBUG_FS))
+		return 0;
+
+	n = snprintf(d->dfs_dir_name, UBI_DFS_DIR_LEN + 1, UBI_DFS_DIR_NAME,
+		     ubi->ubi_num);
+	if (n == UBI_DFS_DIR_LEN) {
+		/* The array size is too small */
+		fname = UBI_DFS_DIR_NAME;
+		dent = ERR_PTR(-EINVAL);
+		goto out;
+	}
+
+	fname = d->dfs_dir_name;
+	dent = debugfs_create_dir(fname, dfs_rootdir);
+	if (IS_ERR_OR_NULL(dent))
+		goto out;
+	d->dfs_dir = dent;
+
+	fname = "chk_gen";
+	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_chk_gen = dent;
+
+	fname = "chk_io";
+	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_chk_io = dent;
+
+	fname = "tst_disable_bgt";
+	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_disable_bgt = dent;
+
+	fname = "tst_emulate_bitflips";
+	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_emulate_bitflips = dent;
+
+	fname = "tst_emulate_io_failures";
+	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, (void *)ubi_num,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_emulate_io_failures = dent;
+
+	return 0;
+
+out_remove:
+	debugfs_remove_recursive(d->dfs_dir);
+out:
+	err = dent ? PTR_ERR(dent) : -ENODEV;
+	ubi_err("cannot create \"%s\" debugfs file or directory, error %d\n",
+		fname, err);
+	return err;
+}
+
+/**
+ * dbg_debug_exit_dev - free all debugfs files corresponding to device @ubi
+ * @ubi: UBI device description object
+ */
+void ubi_debugfs_exit_dev(struct ubi_device *ubi)
+{
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
+		debugfs_remove_recursive(ubi->dbg.dfs_dir);
+}
+#else
+int ubi_debugfs_init(void)
+{
+	return 0;
+}
+
+void ubi_debugfs_exit(void)
+{
+}
+
+int ubi_debugfs_init_dev(struct ubi_device *ubi)
+{
+	return 0;
+}
+
+void ubi_debugfs_exit_dev(struct ubi_device *ubi)
+{
+}
+#endif
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
index 222b2b8..af0f989 100644
--- a/drivers/mtd/ubi/debug.h
+++ b/drivers/mtd/ubi/debug.h
@@ -9,132 +9,120 @@
 #ifndef __UBI_DEBUG_H__
 #define __UBI_DEBUG_H__
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-#ifdef UBI_LINUX
-#include <linux/random.h>
-#endif
-
-#define ubi_assert(expr)  BUG_ON(!(expr))
-#define dbg_err(fmt, ...) ubi_err(fmt, ##__VA_ARGS__)
-#else
-#define ubi_assert(expr)  ({})
-#define dbg_err(fmt, ...) ({})
-#endif
-
-#ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
-#define DBG_DISABLE_BGT 1
-#else
-#define DBG_DISABLE_BGT 0
-#endif
-
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG
-/* Generic debugging message */
-#define dbg_msg(fmt, ...)                                    \
-	printk(KERN_DEBUG "UBI DBG: %s: " fmt "\n", \
-	       __FUNCTION__, ##__VA_ARGS__)
-
-#define ubi_dbg_dump_stack() dump_stack()
-
-struct ubi_ec_hdr;
-struct ubi_vid_hdr;
-struct ubi_volume;
-struct ubi_vtbl_record;
-struct ubi_scan_volume;
-struct ubi_scan_leb;
-struct ubi_mkvol_req;
+void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len);
+void ubi_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr);
+void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr);
 
-void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr);
-void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr);
-void ubi_dbg_dump_vol_info(const struct ubi_volume *vol);
-void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx);
-void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv);
-void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type);
-void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
-
-#else
-
-#define dbg_msg(fmt, ...)    ({})
-#define ubi_dbg_dump_stack() ({})
-#define ubi_dbg_dump_ec_hdr(ec_hdr)      ({})
-#define ubi_dbg_dump_vid_hdr(vid_hdr)    ({})
-#define ubi_dbg_dump_vol_info(vol)       ({})
-#define ubi_dbg_dump_vtbl_record(r, idx) ({})
-#define ubi_dbg_dump_sv(sv)              ({})
-#define ubi_dbg_dump_seb(seb, type)      ({})
-#define ubi_dbg_dump_mkvol_req(req)      ({})
-
-#endif /* CONFIG_MTD_UBI_DEBUG_MSG */
-
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG_EBA
-/* Messages from the eraseblock association unit */
-#define dbg_eba(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/random.h>
 #else
-#define dbg_eba(fmt, ...) ({})
-#endif
+struct ubi_cur {
+	int pid;
+};
 
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG_WL
-/* Messages from the wear-leveling unit */
-#define dbg_wl(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
-#else
-#define dbg_wl(fmt, ...) ({})
+static struct ubi_cur current_h = {.pid = 0 };
+static struct ubi_cur *current = &current_h;
 #endif
 
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG_IO
-/* Messages from the input/output unit */
-#define dbg_io(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
-#else
-#define dbg_io(fmt, ...) ({})
-#endif
-
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG_BLD
+#define ubi_assert(expr)  do {                                               \
+	if (unlikely(!(expr))) {                                             \
+		pr_crit("UBI assert failed in %s at %u (pid %d)\n",          \
+		       __func__, __LINE__, current->pid);                    \
+		dump_stack();                                                \
+	}                                                                    \
+} while (0)
+
+#define ubi_dbg_print_hex_dump(l, ps, pt, r, g, b, len, a)                   \
+		print_hex_dump(l, ps, pt, r, g, b, len, a)
+
+#define ubi_dbg_msg(type, fmt, ...) \
+	pr_debug("UBI DBG " type " (pid %d): " fmt "\n", current->pid,       \
+		 ##__VA_ARGS__)
+
+/* General debugging messages */
+#define dbg_gen(fmt, ...) ubi_dbg_msg("gen", fmt, ##__VA_ARGS__)
+/* Messages from the eraseblock association sub-system */
+#define dbg_eba(fmt, ...) ubi_dbg_msg("eba", fmt, ##__VA_ARGS__)
+/* Messages from the wear-leveling sub-system */
+#define dbg_wl(fmt, ...)  ubi_dbg_msg("wl", fmt, ##__VA_ARGS__)
+/* Messages from the input/output sub-system */
+#define dbg_io(fmt, ...)  ubi_dbg_msg("io", fmt, ##__VA_ARGS__)
 /* Initialization and build messages */
-#define dbg_bld(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
-#else
-#define dbg_bld(fmt, ...) ({})
-#endif
+#define dbg_bld(fmt, ...) ubi_dbg_msg("bld", fmt, ##__VA_ARGS__)
+
+void ubi_dump_vol_info(const struct ubi_volume *vol);
+void ubi_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx);
+void ubi_dump_av(const struct ubi_ainf_volume *av);
+void ubi_dump_aeb(const struct ubi_ainf_peb *aeb, int type);
+void ubi_dump_mkvol_req(const struct ubi_mkvol_req *req);
+int ubi_self_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
+			  int len);
+int ubi_debugfs_init(void);
+void ubi_debugfs_exit(void);
+int ubi_debugfs_init_dev(struct ubi_device *ubi);
+void ubi_debugfs_exit_dev(struct ubi_device *ubi);
+
+/**
+ * ubi_dbg_is_bgt_disabled - if the background thread is disabled.
+ * @ubi: UBI device description object
+ *
+ * Returns non-zero if the UBI background thread is disabled for testing
+ * purposes.
+ */
+static inline int ubi_dbg_is_bgt_disabled(const struct ubi_device *ubi)
+{
+	return ubi->dbg.disable_bgt;
+}
 
-#ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS
 /**
  * ubi_dbg_is_bitflip - if it is time to emulate a bit-flip.
+ * @ubi: UBI device description object
  *
  * Returns non-zero if a bit-flip should be emulated, otherwise returns zero.
  */
-static inline int ubi_dbg_is_bitflip(void)
+static inline int ubi_dbg_is_bitflip(const struct ubi_device *ubi)
 {
-	return !(random32() % 200);
+	if (ubi->dbg.emulate_bitflips)
+		return !(prandom_u32() % 200);
+	return 0;
 }
-#else
-#define ubi_dbg_is_bitflip() 0
-#endif
 
-#ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES
 /**
  * ubi_dbg_is_write_failure - if it is time to emulate a write failure.
+ * @ubi: UBI device description object
  *
  * Returns non-zero if a write failure should be emulated, otherwise returns
  * zero.
  */
-static inline int ubi_dbg_is_write_failure(void)
+static inline int ubi_dbg_is_write_failure(const struct ubi_device *ubi)
 {
-	return !(random32() % 500);
+	if (ubi->dbg.emulate_io_failures)
+		return !(prandom_u32() % 500);
+	return 0;
 }
-#else
-#define ubi_dbg_is_write_failure() 0
-#endif
 
-#ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES
 /**
  * ubi_dbg_is_erase_failure - if its time to emulate an erase failure.
+ * @ubi: UBI device description object
  *
  * Returns non-zero if an erase failure should be emulated, otherwise returns
  * zero.
  */
-static inline int ubi_dbg_is_erase_failure(void)
+static inline int ubi_dbg_is_erase_failure(const struct ubi_device *ubi)
 {
-		return !(random32() % 400);
+	if (ubi->dbg.emulate_io_failures)
+		return !(prandom_u32() % 400);
+	return 0;
 }
-#else
-#define ubi_dbg_is_erase_failure() 0
-#endif
 
+static inline int ubi_dbg_chk_io(const struct ubi_device *ubi)
+{
+	return ubi->dbg.chk_io;
+}
+
+static inline int ubi_dbg_chk_gen(const struct ubi_device *ubi)
+{
+	return ubi->dbg.chk_gen;
+}
 #endif /* !__UBI_DEBUG_H__ */
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 7d27eda..3c2a7e6 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -7,20 +7,20 @@
  */
 
 /*
- * The UBI Eraseblock Association (EBA) unit.
+ * The UBI Eraseblock Association (EBA) sub-system.
  *
- * This unit is responsible for I/O to/from logical eraseblock.
+ * This sub-system is responsible for I/O to/from logical eraseblock.
  *
  * Although in this implementation the EBA table is fully kept and managed in
  * RAM, which assumes poor scalability, it might be (partially) maintained on
  * flash in future implementations.
  *
- * The EBA unit implements per-logical eraseblock locking. Before accessing a
- * logical eraseblock it is locked for reading or writing. The per-logical
- * eraseblock locking is implemented by means of the lock tree. The lock tree
- * is an RB-tree which refers all the currently locked logical eraseblocks. The
- * lock tree elements are &struct ubi_ltree_entry objects. They are indexed by
- * (@vol_id, @lnum) pairs.
+ * The EBA sub-system implements per-logical eraseblock locking. Before
+ * accessing a logical eraseblock it is locked for reading or writing. The
+ * per-logical eraseblock locking is implemented by means of the lock tree. The
+ * lock tree is an RB-tree which refers all the currently locked logical
+ * eraseblocks. The lock tree elements are &struct ubi_ltree_entry objects.
+ * They are indexed by (@vol_id, @lnum) pairs.
  *
  * EBA also maintains the global sequence counter which is incremented each
  * time a logical eraseblock is mapped to a physical eraseblock and it is
@@ -29,13 +29,15 @@
  * 64 bits is enough to never overflow.
  */
 
-#ifdef UBI_LINUX
+#define __UBOOT__
+#ifndef __UBOOT__
 #include <linux/slab.h>
 #include <linux/crc32.h>
-#include <linux/err.h>
+#else
+#include <ubi_uboot.h>
 #endif
 
-#include <ubi_uboot.h>
+#include <linux/err.h>
 #include "ubi.h"
 
 /* Number of physical eraseblocks reserved for atomic LEB change operation */
@@ -49,7 +51,7 @@
  * global sequence counter value. It also increases the global sequence
  * counter.
  */
-static unsigned long long next_sqnum(struct ubi_device *ubi)
+unsigned long long ubi_next_sqnum(struct ubi_device *ubi)
 {
 	unsigned long long sqnum;
 
@@ -181,9 +183,7 @@ static struct ubi_ltree_entry *ltree_add_entry(struct ubi_device *ubi,
 	le->users += 1;
 	spin_unlock(&ubi->ltree_lock);
 
-	if (le_free)
-		kfree(le_free);
-
+	kfree(le_free);
 	return le;
 }
 
@@ -215,22 +215,18 @@ static int leb_read_lock(struct ubi_device *ubi, int vol_id, int lnum)
  */
 static void leb_read_unlock(struct ubi_device *ubi, int vol_id, int lnum)
 {
-	int _free = 0;
 	struct ubi_ltree_entry *le;
 
 	spin_lock(&ubi->ltree_lock);
 	le = ltree_lookup(ubi, vol_id, lnum);
 	le->users -= 1;
 	ubi_assert(le->users >= 0);
+	up_read(&le->mutex);
 	if (le->users == 0) {
 		rb_erase(&le->rb, &ubi->ltree);
-		_free = 1;
+		kfree(le);
 	}
 	spin_unlock(&ubi->ltree_lock);
-
-	up_read(&le->mutex);
-	if (_free)
-		kfree(le);
 }
 
 /**
@@ -266,7 +262,6 @@ static int leb_write_lock(struct ubi_device *ubi, int vol_id, int lnum)
  */
 static int leb_write_trylock(struct ubi_device *ubi, int vol_id, int lnum)
 {
-	int _free;
 	struct ubi_ltree_entry *le;
 
 	le = ltree_add_entry(ubi, vol_id, lnum);
@@ -281,12 +276,9 @@ static int leb_write_trylock(struct ubi_device *ubi, int vol_id, int lnum)
 	ubi_assert(le->users >= 0);
 	if (le->users == 0) {
 		rb_erase(&le->rb, &ubi->ltree);
-		_free = 1;
-	} else
-		_free = 0;
-	spin_unlock(&ubi->ltree_lock);
-	if (_free)
 		kfree(le);
+	}
+	spin_unlock(&ubi->ltree_lock);
 
 	return 1;
 }
@@ -299,23 +291,18 @@ static int leb_write_trylock(struct ubi_device *ubi, int vol_id, int lnum)
  */
 static void leb_write_unlock(struct ubi_device *ubi, int vol_id, int lnum)
 {
-	int _free;
 	struct ubi_ltree_entry *le;
 
 	spin_lock(&ubi->ltree_lock);
 	le = ltree_lookup(ubi, vol_id, lnum);
 	le->users -= 1;
 	ubi_assert(le->users >= 0);
+	up_write(&le->mutex);
 	if (le->users == 0) {
 		rb_erase(&le->rb, &ubi->ltree);
-		_free = 1;
-	} else
-		_free = 0;
-	spin_unlock(&ubi->ltree_lock);
-
-	up_write(&le->mutex);
-	if (_free)
 		kfree(le);
+	}
+	spin_unlock(&ubi->ltree_lock);
 }
 
 /**
@@ -347,8 +334,10 @@ int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
 
 	dbg_eba("erase LEB %d:%d, PEB %d", vol_id, lnum, pnum);
 
+	down_read(&ubi->fm_sem);
 	vol->eba_tbl[lnum] = UBI_LEB_UNMAPPED;
-	err = ubi_wl_put_peb(ubi, pnum, 0);
+	up_read(&ubi->fm_sem);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 0);
 
 out_unlock:
 	leb_write_unlock(ubi, vol_id, lnum);
@@ -425,9 +414,10 @@ retry:
 				 * may try to recover data. FIXME: but this is
 				 * not implemented.
 				 */
-				if (err == UBI_IO_BAD_VID_HDR) {
-					ubi_warn("bad VID header at PEB %d, LEB"
-						 "%d:%d", pnum, vol_id, lnum);
+				if (err == UBI_IO_BAD_HDR_EBADMSG ||
+				    err == UBI_IO_BAD_HDR) {
+					ubi_warn("corrupted VID header at PEB %d, LEB %d:%d",
+						 pnum, vol_id, lnum);
 					err = -EBADMSG;
 				} else
 					ubi_ro_mode(ubi);
@@ -508,16 +498,12 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
 	struct ubi_vid_hdr *vid_hdr;
 
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
-	if (!vid_hdr) {
+	if (!vid_hdr)
 		return -ENOMEM;
-	}
-
-	mutex_lock(&ubi->buf_mutex);
 
 retry:
-	new_pnum = ubi_wl_get_peb(ubi, UBI_UNKNOWN);
+	new_pnum = ubi_wl_get_peb(ubi);
 	if (new_pnum < 0) {
-		mutex_unlock(&ubi->buf_mutex);
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		return new_pnum;
 	}
@@ -531,39 +517,45 @@ retry:
 		goto out_put;
 	}
 
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr);
 	if (err)
 		goto write_error;
 
 	data_size = offset + len;
-	memset(ubi->peb_buf1 + offset, 0xFF, len);
+	mutex_lock(&ubi->buf_mutex);
+	memset(ubi->peb_buf + offset, 0xFF, len);
 
 	/* Read everything before the area where the write failure happened */
 	if (offset > 0) {
-		err = ubi_io_read_data(ubi, ubi->peb_buf1, pnum, 0, offset);
+		err = ubi_io_read_data(ubi, ubi->peb_buf, pnum, 0, offset);
 		if (err && err != UBI_IO_BITFLIPS)
-			goto out_put;
+			goto out_unlock;
 	}
 
-	memcpy(ubi->peb_buf1 + offset, buf, len);
+	memcpy(ubi->peb_buf + offset, buf, len);
 
-	err = ubi_io_write_data(ubi, ubi->peb_buf1, new_pnum, 0, data_size);
-	if (err)
+	err = ubi_io_write_data(ubi, ubi->peb_buf, new_pnum, 0, data_size);
+	if (err) {
+		mutex_unlock(&ubi->buf_mutex);
 		goto write_error;
+	}
 
 	mutex_unlock(&ubi->buf_mutex);
 	ubi_free_vid_hdr(ubi, vid_hdr);
 
+	down_read(&ubi->fm_sem);
 	vol->eba_tbl[lnum] = new_pnum;
-	ubi_wl_put_peb(ubi, pnum, 1);
+	up_read(&ubi->fm_sem);
+	ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 
 	ubi_msg("data was successfully recovered");
 	return 0;
 
-out_put:
+out_unlock:
 	mutex_unlock(&ubi->buf_mutex);
-	ubi_wl_put_peb(ubi, new_pnum, 1);
+out_put:
+	ubi_wl_put_peb(ubi, vol_id, lnum, new_pnum, 1);
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
 
@@ -573,9 +565,8 @@ write_error:
 	 * get another one.
 	 */
 	ubi_warn("failed to write to PEB %d", new_pnum);
-	ubi_wl_put_peb(ubi, new_pnum, 1);
+	ubi_wl_put_peb(ubi, vol_id, lnum, new_pnum, 1);
 	if (++tries > UBI_IO_RETRIES) {
-		mutex_unlock(&ubi->buf_mutex);
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		return err;
 	}
@@ -591,7 +582,6 @@ write_error:
  * @buf: the data to write
  * @offset: offset within the logical eraseblock where to write
  * @len: how many bytes to write
- * @dtype: data type
  *
  * This function writes data to logical eraseblock @lnum of a dynamic volume
  * @vol. Returns zero in case of success and a negative error code in case
@@ -599,7 +589,7 @@ write_error:
  * written to the flash media, but may be some garbage.
  */
 int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
-		      const void *buf, int offset, int len, int dtype)
+		      const void *buf, int offset, int len)
 {
 	int err, pnum, tries = 0, vol_id = vol->vol_id;
 	struct ubi_vid_hdr *vid_hdr;
@@ -640,14 +630,14 @@ int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 	}
 
 	vid_hdr->vol_type = UBI_VID_DYNAMIC;
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	vid_hdr->vol_id = cpu_to_be32(vol_id);
 	vid_hdr->lnum = cpu_to_be32(lnum);
 	vid_hdr->compat = ubi_get_compat(ubi, vol_id);
 	vid_hdr->data_pad = cpu_to_be32(vol->data_pad);
 
 retry:
-	pnum = ubi_wl_get_peb(ubi, dtype);
+	pnum = ubi_wl_get_peb(ubi);
 	if (pnum < 0) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -667,14 +657,15 @@ retry:
 	if (len) {
 		err = ubi_io_write_data(ubi, buf, pnum, offset, len);
 		if (err) {
-			ubi_warn("failed to write %d bytes at offset %d of "
-				 "LEB %d:%d, PEB %d", len, offset, vol_id,
-				 lnum, pnum);
+			ubi_warn("failed to write %d bytes at offset %d of LEB %d:%d, PEB %d",
+				 len, offset, vol_id, lnum, pnum);
 			goto write_error;
 		}
 	}
 
+	down_read(&ubi->fm_sem);
 	vol->eba_tbl[lnum] = pnum;
+	up_read(&ubi->fm_sem);
 
 	leb_write_unlock(ubi, vol_id, lnum);
 	ubi_free_vid_hdr(ubi, vid_hdr);
@@ -693,7 +684,7 @@ write_error:
 	 * eraseblock, so just put it and request a new one. We assume that if
 	 * this physical eraseblock went bad, the erase code will handle that.
 	 */
-	err = ubi_wl_put_peb(ubi, pnum, 1);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 	if (err || ++tries > UBI_IO_RETRIES) {
 		ubi_ro_mode(ubi);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -701,7 +692,7 @@ write_error:
 		return err;
 	}
 
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	ubi_msg("try another PEB");
 	goto retry;
 }
@@ -713,7 +704,6 @@ write_error:
  * @lnum: logical eraseblock number
  * @buf: data to write
  * @len: how many bytes to write
- * @dtype: data type
  * @used_ebs: how many logical eraseblocks will this volume contain
  *
  * This function writes data to logical eraseblock @lnum of static volume
@@ -725,13 +715,12 @@ write_error:
  * to the real data size, although the @buf buffer has to contain the
  * alignment. In all other cases, @len has to be aligned.
  *
- * It is prohibited to write more then once to logical eraseblocks of static
+ * It is prohibited to write more than once to logical eraseblocks of static
  * volumes. This function returns zero in case of success and a negative error
  * code in case of failure.
  */
 int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
-			 int lnum, const void *buf, int len, int dtype,
-			 int used_ebs)
+			 int lnum, const void *buf, int len, int used_ebs)
 {
 	int err, pnum, tries = 0, data_size = len, vol_id = vol->vol_id;
 	struct ubi_vid_hdr *vid_hdr;
@@ -756,7 +745,7 @@ int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
 		return err;
 	}
 
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	vid_hdr->vol_id = cpu_to_be32(vol_id);
 	vid_hdr->lnum = cpu_to_be32(lnum);
 	vid_hdr->compat = ubi_get_compat(ubi, vol_id);
@@ -769,7 +758,7 @@ int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
 	vid_hdr->data_crc = cpu_to_be32(crc);
 
 retry:
-	pnum = ubi_wl_get_peb(ubi, dtype);
+	pnum = ubi_wl_get_peb(ubi);
 	if (pnum < 0) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -794,7 +783,9 @@ retry:
 	}
 
 	ubi_assert(vol->eba_tbl[lnum] < 0);
+	down_read(&ubi->fm_sem);
 	vol->eba_tbl[lnum] = pnum;
+	up_read(&ubi->fm_sem);
 
 	leb_write_unlock(ubi, vol_id, lnum);
 	ubi_free_vid_hdr(ubi, vid_hdr);
@@ -813,7 +804,7 @@ write_error:
 		return err;
 	}
 
-	err = ubi_wl_put_peb(ubi, pnum, 1);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 	if (err || ++tries > UBI_IO_RETRIES) {
 		ubi_ro_mode(ubi);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -821,7 +812,7 @@ write_error:
 		return err;
 	}
 
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	ubi_msg("try another PEB");
 	goto retry;
 }
@@ -833,7 +824,6 @@ write_error:
  * @lnum: logical eraseblock number
  * @buf: data to write
  * @len: how many bytes to write
- * @dtype: data type
  *
  * This function changes the contents of a logical eraseblock atomically. @buf
  * has to contain new logical eraseblock data, and @len - the length of the
@@ -845,7 +835,7 @@ write_error:
  * LEB change may be done at a time. This is ensured by @ubi->alc_mutex.
  */
 int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
-			      int lnum, const void *buf, int len, int dtype)
+			      int lnum, const void *buf, int len)
 {
 	int err, pnum, tries = 0, vol_id = vol->vol_id;
 	struct ubi_vid_hdr *vid_hdr;
@@ -862,7 +852,7 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 		err = ubi_eba_unmap_leb(ubi, vol, lnum);
 		if (err)
 			return err;
-		return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0, dtype);
+		return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0);
 	}
 
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
@@ -874,7 +864,7 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 	if (err)
 		goto out_mutex;
 
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	vid_hdr->vol_id = cpu_to_be32(vol_id);
 	vid_hdr->lnum = cpu_to_be32(lnum);
 	vid_hdr->compat = ubi_get_compat(ubi, vol_id);
@@ -887,7 +877,7 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 	vid_hdr->data_crc = cpu_to_be32(crc);
 
 retry:
-	pnum = ubi_wl_get_peb(ubi, dtype);
+	pnum = ubi_wl_get_peb(ubi);
 	if (pnum < 0) {
 		err = pnum;
 		goto out_leb_unlock;
@@ -911,12 +901,14 @@ retry:
 	}
 
 	if (vol->eba_tbl[lnum] >= 0) {
-		err = ubi_wl_put_peb(ubi, vol->eba_tbl[lnum], 1);
+		err = ubi_wl_put_peb(ubi, vol_id, lnum, vol->eba_tbl[lnum], 0);
 		if (err)
 			goto out_leb_unlock;
 	}
 
+	down_read(&ubi->fm_sem);
 	vol->eba_tbl[lnum] = pnum;
+	up_read(&ubi->fm_sem);
 
 out_leb_unlock:
 	leb_write_unlock(ubi, vol_id, lnum);
@@ -936,18 +928,45 @@ write_error:
 		goto out_leb_unlock;
 	}
 
-	err = ubi_wl_put_peb(ubi, pnum, 1);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 	if (err || ++tries > UBI_IO_RETRIES) {
 		ubi_ro_mode(ubi);
 		goto out_leb_unlock;
 	}
 
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 	ubi_msg("try another PEB");
 	goto retry;
 }
 
 /**
+ * is_error_sane - check whether a read error is sane.
+ * @err: code of the error happened during reading
+ *
+ * This is a helper function for 'ubi_eba_copy_leb()' which is called when we
+ * cannot read data from the target PEB (an error @err happened). If the error
+ * code is sane, then we treat this error as non-fatal. Otherwise the error is
+ * fatal and UBI will be switched to R/O mode later.
+ *
+ * The idea is that we try not to switch to R/O mode if the read error is
+ * something which suggests there was a real read problem. E.g., %-EIO. Or a
+ * memory allocation failed (-%ENOMEM). Otherwise, it is safer to switch to R/O
+ * mode, simply because we do not know what happened at the MTD level, and we
+ * cannot handle this. E.g., the underlying driver may have become crazy, and
+ * it is safer to switch to R/O mode to preserve the data.
+ *
+ * And bear in mind, this is about reading from the target PEB, i.e. the PEB
+ * which we have just written.
+ */
+static int is_error_sane(int err)
+{
+	if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_HDR ||
+	    err == UBI_IO_BAD_HDR_EBADMSG || err == -ETIMEDOUT)
+		return 0;
+	return 1;
+}
+
+/**
  * ubi_eba_copy_leb - copy logical eraseblock.
  * @ubi: UBI device description object
  * @from: physical eraseblock number from where to copy
@@ -957,10 +976,9 @@ write_error:
  * This function copies logical eraseblock from physical eraseblock @from to
  * physical eraseblock @to. The @vid_hdr buffer may be changed by this
  * function. Returns:
- *   o %0  in case of success;
- *   o %1 if the operation was canceled and should be tried later (e.g.,
- *     because a bit-flip was detected at the target PEB);
- *   o %2 if the volume is being deleted and this LEB should not be moved.
+ *   o %0 in case of success;
+ *   o %MOVE_CANCEL_RACE, %MOVE_TARGET_WR_ERR, %MOVE_TARGET_BITFLIPS, etc;
+ *   o a negative error code in case of failure.
  */
 int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 		     struct ubi_vid_hdr *vid_hdr)
@@ -972,7 +990,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 	vol_id = be32_to_cpu(vid_hdr->vol_id);
 	lnum = be32_to_cpu(vid_hdr->lnum);
 
-	dbg_eba("copy LEB %d:%d, PEB %d to PEB %d", vol_id, lnum, from, to);
+	dbg_wl("copy LEB %d:%d, PEB %d to PEB %d", vol_id, lnum, from, to);
 
 	if (vid_hdr->vol_type == UBI_VID_STATIC) {
 		data_size = be32_to_cpu(vid_hdr->data_size);
@@ -986,17 +1004,16 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 	/*
 	 * Note, we may race with volume deletion, which means that the volume
 	 * this logical eraseblock belongs to might be being deleted. Since the
-	 * volume deletion unmaps all the volume's logical eraseblocks, it will
+	 * volume deletion un-maps all the volume's logical eraseblocks, it will
 	 * be locked in 'ubi_wl_put_peb()' and wait for the WL worker to finish.
 	 */
 	vol = ubi->volumes[idx];
+	spin_unlock(&ubi->volumes_lock);
 	if (!vol) {
 		/* No need to do further work, cancel */
-		dbg_eba("volume %d is being removed, cancel", vol_id);
-		spin_unlock(&ubi->volumes_lock);
-		return 2;
+		dbg_wl("volume %d is being removed, cancel", vol_id);
+		return MOVE_CANCEL_RACE;
 	}
-	spin_unlock(&ubi->volumes_lock);
 
 	/*
 	 * We do not want anybody to write to this logical eraseblock while we
@@ -1008,12 +1025,15 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 	 * (@from). This task locks the LEB and goes sleep in the
 	 * 'ubi_wl_put_peb()' function on the @ubi->move_mutex. In turn, we are
 	 * holding @ubi->move_mutex and go sleep on the LEB lock. So, if the
-	 * LEB is already locked, we just do not move it and return %1.
+	 * LEB is already locked, we just do not move it and return
+	 * %MOVE_RETRY. Note, we do not return %MOVE_CANCEL_RACE here because
+	 * we do not know the reasons of the contention - it may be just a
+	 * normal I/O on this LEB, so we want to re-try.
 	 */
 	err = leb_write_trylock(ubi, vol_id, lnum);
 	if (err) {
-		dbg_eba("contention on LEB %d:%d, cancel", vol_id, lnum);
-		return err;
+		dbg_wl("contention on LEB %d:%d, cancel", vol_id, lnum);
+		return MOVE_RETRY;
 	}
 
 	/*
@@ -1022,30 +1042,30 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 	 * cancel it.
 	 */
 	if (vol->eba_tbl[lnum] != from) {
-		dbg_eba("LEB %d:%d is no longer mapped to PEB %d, mapped to "
-			"PEB %d, cancel", vol_id, lnum, from,
-			vol->eba_tbl[lnum]);
-		err = 1;
+		dbg_wl("LEB %d:%d is no longer mapped to PEB %d, mapped to PEB %d, cancel",
+		       vol_id, lnum, from, vol->eba_tbl[lnum]);
+		err = MOVE_CANCEL_RACE;
 		goto out_unlock_leb;
 	}
 
 	/*
-	 * OK, now the LEB is locked and we can safely start moving iy. Since
-	 * this function utilizes thie @ubi->peb1_buf buffer which is shared
-	 * with some other functions, so lock the buffer by taking the
+	 * OK, now the LEB is locked and we can safely start moving it. Since
+	 * this function utilizes the @ubi->peb_buf buffer which is shared
+	 * with some other functions - we lock the buffer by taking the
 	 * @ubi->buf_mutex.
 	 */
 	mutex_lock(&ubi->buf_mutex);
-	dbg_eba("read %d bytes of data", aldata_size);
-	err = ubi_io_read_data(ubi, ubi->peb_buf1, from, 0, aldata_size);
+	dbg_wl("read %d bytes of data", aldata_size);
+	err = ubi_io_read_data(ubi, ubi->peb_buf, from, 0, aldata_size);
 	if (err && err != UBI_IO_BITFLIPS) {
 		ubi_warn("error %d while reading data from PEB %d",
 			 err, from);
+		err = MOVE_SOURCE_RD_ERR;
 		goto out_unlock_buf;
 	}
 
 	/*
-	 * Now we have got to calculate how much data we have to to copy. In
+	 * Now we have got to calculate how much data we have to copy. In
 	 * case of a static volume it is fairly easy - the VID header contains
 	 * the data size. In case of a dynamic volume it is more difficult - we
 	 * have to read the contents, cut 0xFF bytes from the end and copy only
@@ -1056,14 +1076,14 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 	 */
 	if (vid_hdr->vol_type == UBI_VID_DYNAMIC)
 		aldata_size = data_size =
-			ubi_calc_data_len(ubi, ubi->peb_buf1, data_size);
+			ubi_calc_data_len(ubi, ubi->peb_buf, data_size);
 
 	cond_resched();
-	crc = crc32(UBI_CRC32_INIT, ubi->peb_buf1, data_size);
+	crc = crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size);
 	cond_resched();
 
 	/*
-	 * It may turn out to me that the whole @from physical eraseblock
+	 * It may turn out to be that the whole @from physical eraseblock
 	 * contains only 0xFF bytes. Then we have to only write the VID header
 	 * and do not write any data. This also means we should not set
 	 * @vid_hdr->copy_flag, @vid_hdr->data_size, and @vid_hdr->data_crc.
@@ -1073,28 +1093,37 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 		vid_hdr->data_size = cpu_to_be32(data_size);
 		vid_hdr->data_crc = cpu_to_be32(crc);
 	}
-	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
 
 	err = ubi_io_write_vid_hdr(ubi, to, vid_hdr);
-	if (err)
+	if (err) {
+		if (err == -EIO)
+			err = MOVE_TARGET_WR_ERR;
 		goto out_unlock_buf;
+	}
 
 	cond_resched();
 
 	/* Read the VID header back and check if it was written correctly */
 	err = ubi_io_read_vid_hdr(ubi, to, vid_hdr, 1);
 	if (err) {
-		if (err != UBI_IO_BITFLIPS)
-			ubi_warn("cannot read VID header back from PEB %d", to);
-		else
-			err = 1;
+		if (err != UBI_IO_BITFLIPS) {
+			ubi_warn("error %d while reading VID header back from PEB %d",
+				 err, to);
+			if (is_error_sane(err))
+				err = MOVE_TARGET_RD_ERR;
+		} else
+			err = MOVE_TARGET_BITFLIPS;
 		goto out_unlock_buf;
 	}
 
 	if (data_size > 0) {
-		err = ubi_io_write_data(ubi, ubi->peb_buf1, to, 0, aldata_size);
-		if (err)
+		err = ubi_io_write_data(ubi, ubi->peb_buf, to, 0, aldata_size);
+		if (err) {
+			if (err == -EIO)
+				err = MOVE_TARGET_WR_ERR;
 			goto out_unlock_buf;
+		}
 
 		cond_resched();
 
@@ -1102,28 +1131,33 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 		 * We've written the data and are going to read it back to make
 		 * sure it was written correctly.
 		 */
-
-		err = ubi_io_read_data(ubi, ubi->peb_buf2, to, 0, aldata_size);
+		memset(ubi->peb_buf, 0xFF, aldata_size);
+		err = ubi_io_read_data(ubi, ubi->peb_buf, to, 0, aldata_size);
 		if (err) {
-			if (err != UBI_IO_BITFLIPS)
-				ubi_warn("cannot read data back from PEB %d",
-					 to);
-			else
-				err = 1;
+			if (err != UBI_IO_BITFLIPS) {
+				ubi_warn("error %d while reading data back from PEB %d",
+					 err, to);
+				if (is_error_sane(err))
+					err = MOVE_TARGET_RD_ERR;
+			} else
+				err = MOVE_TARGET_BITFLIPS;
 			goto out_unlock_buf;
 		}
 
 		cond_resched();
 
-		if (memcmp(ubi->peb_buf1, ubi->peb_buf2, aldata_size)) {
-			ubi_warn("read data back from PEB %d - it is different",
+		if (crc != crc32(UBI_CRC32_INIT, ubi->peb_buf, data_size)) {
+			ubi_warn("read data back from PEB %d and it is different",
 				 to);
+			err = -EINVAL;
 			goto out_unlock_buf;
 		}
 	}
 
 	ubi_assert(vol->eba_tbl[lnum] == from);
+	down_read(&ubi->fm_sem);
 	vol->eba_tbl[lnum] = to;
+	up_read(&ubi->fm_sem);
 
 out_unlock_buf:
 	mutex_unlock(&ubi->buf_mutex);
@@ -1133,28 +1167,165 @@ out_unlock_leb:
 }
 
 /**
- * ubi_eba_init_scan - initialize the EBA unit using scanning information.
+ * print_rsvd_warning - warn about not having enough reserved PEBs.
  * @ubi: UBI device description object
- * @si: scanning information
+ *
+ * This is a helper function for 'ubi_eba_init()' which is called when UBI
+ * cannot reserve enough PEBs for bad block handling. This function makes a
+ * decision whether we have to print a warning or not. The algorithm is as
+ * follows:
+ *   o if this is a new UBI image, then just print the warning
+ *   o if this is an UBI image which has already been used for some time, print
+ *     a warning only if we can reserve less than 10% of the expected amount of
+ *     the reserved PEB.
+ *
+ * The idea is that when UBI is used, PEBs become bad, and the reserved pool
+ * of PEBs becomes smaller, which is normal and we do not want to scare users
+ * with a warning every time they attach the MTD device. This was an issue
+ * reported by real users.
+ */
+static void print_rsvd_warning(struct ubi_device *ubi,
+			       struct ubi_attach_info *ai)
+{
+	/*
+	 * The 1 << 18 (256KiB) number is picked randomly, just a reasonably
+	 * large number to distinguish between newly flashed and used images.
+	 */
+	if (ai->max_sqnum > (1 << 18)) {
+		int min = ubi->beb_rsvd_level / 10;
+
+		if (!min)
+			min = 1;
+		if (ubi->beb_rsvd_pebs > min)
+			return;
+	}
+
+	ubi_warn("cannot reserve enough PEBs for bad PEB handling, reserved %d, need %d",
+		 ubi->beb_rsvd_pebs, ubi->beb_rsvd_level);
+	if (ubi->corr_peb_count)
+		ubi_warn("%d PEBs are corrupted and not used",
+			 ubi->corr_peb_count);
+}
+
+/**
+ * self_check_eba - run a self check on the EBA table constructed by fastmap.
+ * @ubi: UBI device description object
+ * @ai_fastmap: UBI attach info object created by fastmap
+ * @ai_scan: UBI attach info object created by scanning
+ *
+ * Returns < 0 in case of an internal error, 0 otherwise.
+ * If a bad EBA table entry was found it will be printed out and
+ * ubi_assert() triggers.
+ */
+int self_check_eba(struct ubi_device *ubi, struct ubi_attach_info *ai_fastmap,
+		   struct ubi_attach_info *ai_scan)
+{
+	int i, j, num_volumes, ret = 0;
+	int **scan_eba, **fm_eba;
+	struct ubi_ainf_volume *av;
+	struct ubi_volume *vol;
+	struct ubi_ainf_peb *aeb;
+	struct rb_node *rb;
+
+	num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;
+
+	scan_eba = kmalloc(sizeof(*scan_eba) * num_volumes, GFP_KERNEL);
+	if (!scan_eba)
+		return -ENOMEM;
+
+	fm_eba = kmalloc(sizeof(*fm_eba) * num_volumes, GFP_KERNEL);
+	if (!fm_eba) {
+		kfree(scan_eba);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < num_volumes; i++) {
+		vol = ubi->volumes[i];
+		if (!vol)
+			continue;
+
+		scan_eba[i] = kmalloc(vol->reserved_pebs * sizeof(**scan_eba),
+				      GFP_KERNEL);
+		if (!scan_eba[i]) {
+			ret = -ENOMEM;
+			goto out_free;
+		}
+
+		fm_eba[i] = kmalloc(vol->reserved_pebs * sizeof(**fm_eba),
+				    GFP_KERNEL);
+		if (!fm_eba[i]) {
+			ret = -ENOMEM;
+			goto out_free;
+		}
+
+		for (j = 0; j < vol->reserved_pebs; j++)
+			scan_eba[i][j] = fm_eba[i][j] = UBI_LEB_UNMAPPED;
+
+		av = ubi_find_av(ai_scan, idx2vol_id(ubi, i));
+		if (!av)
+			continue;
+
+		ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb)
+			scan_eba[i][aeb->lnum] = aeb->pnum;
+
+		av = ubi_find_av(ai_fastmap, idx2vol_id(ubi, i));
+		if (!av)
+			continue;
+
+		ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb)
+			fm_eba[i][aeb->lnum] = aeb->pnum;
+
+		for (j = 0; j < vol->reserved_pebs; j++) {
+			if (scan_eba[i][j] != fm_eba[i][j]) {
+				if (scan_eba[i][j] == UBI_LEB_UNMAPPED ||
+					fm_eba[i][j] == UBI_LEB_UNMAPPED)
+					continue;
+
+				ubi_err("LEB:%i:%i is PEB:%i instead of %i!",
+					vol->vol_id, i, fm_eba[i][j],
+					scan_eba[i][j]);
+				ubi_assert(0);
+			}
+		}
+	}
+
+out_free:
+	for (i = 0; i < num_volumes; i++) {
+		if (!ubi->volumes[i])
+			continue;
+
+		kfree(scan_eba[i]);
+		kfree(fm_eba[i]);
+	}
+
+	kfree(scan_eba);
+	kfree(fm_eba);
+	return ret;
+}
+
+/**
+ * ubi_eba_init - initialize the EBA sub-system using attaching information.
+ * @ubi: UBI device description object
+ * @ai: attaching information
  *
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
+int ubi_eba_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
 {
 	int i, j, err, num_volumes;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_volume *av;
 	struct ubi_volume *vol;
-	struct ubi_scan_leb *seb;
+	struct ubi_ainf_peb *aeb;
 	struct rb_node *rb;
 
-	dbg_eba("initialize EBA unit");
+	dbg_eba("initialize EBA sub-system");
 
 	spin_lock_init(&ubi->ltree_lock);
 	mutex_init(&ubi->alc_mutex);
 	ubi->ltree = RB_ROOT;
 
-	ubi->global_sqnum = si->max_sqnum + 1;
+	ubi->global_sqnum = ai->max_sqnum + 1;
 	num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;
 
 	for (i = 0; i < num_volumes; i++) {
@@ -1174,24 +1345,27 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		for (j = 0; j < vol->reserved_pebs; j++)
 			vol->eba_tbl[j] = UBI_LEB_UNMAPPED;
 
-		sv = ubi_scan_find_sv(si, idx2vol_id(ubi, i));
-		if (!sv)
+		av = ubi_find_av(ai, idx2vol_id(ubi, i));
+		if (!av)
 			continue;
 
-		ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
-			if (seb->lnum >= vol->reserved_pebs)
+		ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb) {
+			if (aeb->lnum >= vol->reserved_pebs)
 				/*
 				 * This may happen in case of an unclean reboot
 				 * during re-size.
 				 */
-				ubi_scan_move_to_list(sv, seb, &si->erase);
-			vol->eba_tbl[seb->lnum] = seb->pnum;
+				ubi_move_aeb_to_list(av, aeb, &ai->erase);
+			vol->eba_tbl[aeb->lnum] = aeb->pnum;
 		}
 	}
 
 	if (ubi->avail_pebs < EBA_RESERVED_PEBS) {
 		ubi_err("no enough physical eraseblocks (%d, need %d)",
 			ubi->avail_pebs, EBA_RESERVED_PEBS);
+		if (ubi->corr_peb_count)
+			ubi_err("%d PEBs are corrupted and not used",
+				ubi->corr_peb_count);
 		err = -ENOSPC;
 		goto out_free;
 	}
@@ -1204,9 +1378,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		if (ubi->avail_pebs < ubi->beb_rsvd_level) {
 			/* No enough free physical eraseblocks */
 			ubi->beb_rsvd_pebs = ubi->avail_pebs;
-			ubi_warn("cannot reserve enough PEBs for bad PEB "
-				 "handling, reserved %d, need %d",
-				 ubi->beb_rsvd_pebs, ubi->beb_rsvd_level);
+			print_rsvd_warning(ubi, ai);
 		} else
 			ubi->beb_rsvd_pebs = ubi->beb_rsvd_level;
 
@@ -1214,7 +1386,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		ubi->rsvd_pebs  += ubi->beb_rsvd_pebs;
 	}
 
-	dbg_eba("EBA unit is initialized");
+	dbg_eba("EBA sub-system is initialized");
 	return 0;
 
 out_free:
@@ -1222,23 +1394,7 @@ out_free:
 		if (!ubi->volumes[i])
 			continue;
 		kfree(ubi->volumes[i]->eba_tbl);
+		ubi->volumes[i]->eba_tbl = NULL;
 	}
 	return err;
 }
-
-/**
- * ubi_eba_close - close EBA unit.
- * @ubi: UBI device description object
- */
-void ubi_eba_close(const struct ubi_device *ubi)
-{
-	int i, num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;
-
-	dbg_eba("close EBA unit");
-
-	for (i = 0; i < num_volumes; i++) {
-		if (!ubi->volumes[i])
-			continue;
-		kfree(ubi->volumes[i]->eba_tbl);
-	}
-}
diff --git a/drivers/mtd/ubi/fastmap.c b/drivers/mtd/ubi/fastmap.c
new file mode 100644
index 0000000..787522f
--- /dev/null
+++ b/drivers/mtd/ubi/fastmap.c
@@ -0,0 +1,1584 @@
+/*
+ * Copyright (c) 2012 Linutronix GmbH
+ * Author: Richard Weinberger <richard at nod.at>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/crc32.h>
+#else
+#include <div64.h>
+#include <malloc.h>
+#include <ubi_uboot.h>
+#endif
+
+#include <linux/compat.h>
+#include <linux/math64.h>
+#include "ubi.h"
+
+/**
+ * ubi_calc_fm_size - calculates the fastmap size in bytes for an UBI device.
+ * @ubi: UBI device description object
+ */
+size_t ubi_calc_fm_size(struct ubi_device *ubi)
+{
+	size_t size;
+
+	size = sizeof(struct ubi_fm_hdr) + \
+		sizeof(struct ubi_fm_scan_pool) + \
+		sizeof(struct ubi_fm_scan_pool) + \
+		(ubi->peb_count * sizeof(struct ubi_fm_ec)) + \
+		(sizeof(struct ubi_fm_eba) + \
+		(ubi->peb_count * sizeof(__be32))) + \
+		sizeof(struct ubi_fm_volhdr) * UBI_MAX_VOLUMES;
+	return roundup(size, ubi->leb_size);
+}
+
+
+/**
+ * new_fm_vhdr - allocate a new volume header for fastmap usage.
+ * @ubi: UBI device description object
+ * @vol_id: the VID of the new header
+ *
+ * Returns a new struct ubi_vid_hdr on success.
+ * NULL indicates out of memory.
+ */
+static struct ubi_vid_hdr *new_fm_vhdr(struct ubi_device *ubi, int vol_id)
+{
+	struct ubi_vid_hdr *new;
+
+	new = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+	if (!new)
+		goto out;
+
+	new->vol_type = UBI_VID_DYNAMIC;
+	new->vol_id = cpu_to_be32(vol_id);
+
+	/* UBI implementations without fastmap support have to delete the
+	 * fastmap.
+	 */
+	new->compat = UBI_COMPAT_DELETE;
+
+out:
+	return new;
+}
+
+/**
+ * add_aeb - create and add a attach erase block to a given list.
+ * @ai: UBI attach info object
+ * @list: the target list
+ * @pnum: PEB number of the new attach erase block
+ * @ec: erease counter of the new LEB
+ * @scrub: scrub this PEB after attaching
+ *
+ * Returns 0 on success, < 0 indicates an internal error.
+ */
+static int add_aeb(struct ubi_attach_info *ai, struct list_head *list,
+		   int pnum, int ec, int scrub)
+{
+	struct ubi_ainf_peb *aeb;
+
+	aeb = kmem_cache_alloc(ai->aeb_slab_cache, GFP_KERNEL);
+	if (!aeb)
+		return -ENOMEM;
+
+	aeb->pnum = pnum;
+	aeb->ec = ec;
+	aeb->lnum = -1;
+	aeb->scrub = scrub;
+	aeb->copy_flag = aeb->sqnum = 0;
+
+	ai->ec_sum += aeb->ec;
+	ai->ec_count++;
+
+	if (ai->max_ec < aeb->ec)
+		ai->max_ec = aeb->ec;
+
+	if (ai->min_ec > aeb->ec)
+		ai->min_ec = aeb->ec;
+
+	list_add_tail(&aeb->u.list, list);
+
+	return 0;
+}
+
+/**
+ * add_vol - create and add a new volume to ubi_attach_info.
+ * @ai: ubi_attach_info object
+ * @vol_id: VID of the new volume
+ * @used_ebs: number of used EBS
+ * @data_pad: data padding value of the new volume
+ * @vol_type: volume type
+ * @last_eb_bytes: number of bytes in the last LEB
+ *
+ * Returns the new struct ubi_ainf_volume on success.
+ * NULL indicates an error.
+ */
+static struct ubi_ainf_volume *add_vol(struct ubi_attach_info *ai, int vol_id,
+				       int used_ebs, int data_pad, u8 vol_type,
+				       int last_eb_bytes)
+{
+	struct ubi_ainf_volume *av;
+	struct rb_node **p = &ai->volumes.rb_node, *parent = NULL;
+
+	while (*p) {
+		parent = *p;
+		av = rb_entry(parent, struct ubi_ainf_volume, rb);
+
+		if (vol_id > av->vol_id)
+			p = &(*p)->rb_left;
+		else if (vol_id > av->vol_id)
+			p = &(*p)->rb_right;
+	}
+
+	av = kmalloc(sizeof(struct ubi_ainf_volume), GFP_KERNEL);
+	if (!av)
+		goto out;
+
+	av->highest_lnum = av->leb_count = 0;
+	av->vol_id = vol_id;
+	av->used_ebs = used_ebs;
+	av->data_pad = data_pad;
+	av->last_data_size = last_eb_bytes;
+	av->compat = 0;
+	av->vol_type = vol_type;
+	av->root = RB_ROOT;
+
+	dbg_bld("found volume (ID %i)", vol_id);
+
+	rb_link_node(&av->rb, parent, p);
+	rb_insert_color(&av->rb, &ai->volumes);
+
+out:
+	return av;
+}
+
+/**
+ * assign_aeb_to_av - assigns a SEB to a given ainf_volume and removes it
+ * from it's original list.
+ * @ai: ubi_attach_info object
+ * @aeb: the to be assigned SEB
+ * @av: target scan volume
+ */
+static void assign_aeb_to_av(struct ubi_attach_info *ai,
+			     struct ubi_ainf_peb *aeb,
+			     struct ubi_ainf_volume *av)
+{
+	struct ubi_ainf_peb *tmp_aeb;
+	struct rb_node **p = &ai->volumes.rb_node, *parent = NULL;
+
+	p = &av->root.rb_node;
+	while (*p) {
+		parent = *p;
+
+		tmp_aeb = rb_entry(parent, struct ubi_ainf_peb, u.rb);
+		if (aeb->lnum != tmp_aeb->lnum) {
+			if (aeb->lnum < tmp_aeb->lnum)
+				p = &(*p)->rb_left;
+			else
+				p = &(*p)->rb_right;
+
+			continue;
+		} else
+			break;
+	}
+
+	list_del(&aeb->u.list);
+	av->leb_count++;
+
+	rb_link_node(&aeb->u.rb, parent, p);
+	rb_insert_color(&aeb->u.rb, &av->root);
+}
+
+/**
+ * update_vol - inserts or updates a LEB which was found a pool.
+ * @ubi: the UBI device object
+ * @ai: attach info object
+ * @av: the volume this LEB belongs to
+ * @new_vh: the volume header derived from new_aeb
+ * @new_aeb: the AEB to be examined
+ *
+ * Returns 0 on success, < 0 indicates an internal error.
+ */
+static int update_vol(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		      struct ubi_ainf_volume *av, struct ubi_vid_hdr *new_vh,
+		      struct ubi_ainf_peb *new_aeb)
+{
+	struct rb_node **p = &av->root.rb_node, *parent = NULL;
+	struct ubi_ainf_peb *aeb, *victim;
+	int cmp_res;
+
+	while (*p) {
+		parent = *p;
+		aeb = rb_entry(parent, struct ubi_ainf_peb, u.rb);
+
+		if (be32_to_cpu(new_vh->lnum) != aeb->lnum) {
+			if (be32_to_cpu(new_vh->lnum) < aeb->lnum)
+				p = &(*p)->rb_left;
+			else
+				p = &(*p)->rb_right;
+
+			continue;
+		}
+
+		/* This case can happen if the fastmap gets written
+		 * because of a volume change (creation, deletion, ..).
+		 * Then a PEB can be within the persistent EBA and the pool.
+		 */
+		if (aeb->pnum == new_aeb->pnum) {
+			ubi_assert(aeb->lnum == new_aeb->lnum);
+			kmem_cache_free(ai->aeb_slab_cache, new_aeb);
+
+			return 0;
+		}
+
+		cmp_res = ubi_compare_lebs(ubi, aeb, new_aeb->pnum, new_vh);
+		if (cmp_res < 0)
+			return cmp_res;
+
+		/* new_aeb is newer */
+		if (cmp_res & 1) {
+			victim = kmem_cache_alloc(ai->aeb_slab_cache,
+				GFP_KERNEL);
+			if (!victim)
+				return -ENOMEM;
+
+			victim->ec = aeb->ec;
+			victim->pnum = aeb->pnum;
+			list_add_tail(&victim->u.list, &ai->erase);
+
+			if (av->highest_lnum == be32_to_cpu(new_vh->lnum))
+				av->last_data_size = \
+					be32_to_cpu(new_vh->data_size);
+
+			dbg_bld("vol %i: AEB %i's PEB %i is the newer",
+				av->vol_id, aeb->lnum, new_aeb->pnum);
+
+			aeb->ec = new_aeb->ec;
+			aeb->pnum = new_aeb->pnum;
+			aeb->copy_flag = new_vh->copy_flag;
+			aeb->scrub = new_aeb->scrub;
+			kmem_cache_free(ai->aeb_slab_cache, new_aeb);
+
+		/* new_aeb is older */
+		} else {
+			dbg_bld("vol %i: AEB %i's PEB %i is old, dropping it",
+				av->vol_id, aeb->lnum, new_aeb->pnum);
+			list_add_tail(&new_aeb->u.list, &ai->erase);
+		}
+
+		return 0;
+	}
+	/* This LEB is new, let's add it to the volume */
+
+	if (av->highest_lnum <= be32_to_cpu(new_vh->lnum)) {
+		av->highest_lnum = be32_to_cpu(new_vh->lnum);
+		av->last_data_size = be32_to_cpu(new_vh->data_size);
+	}
+
+	if (av->vol_type == UBI_STATIC_VOLUME)
+		av->used_ebs = be32_to_cpu(new_vh->used_ebs);
+
+	av->leb_count++;
+
+	rb_link_node(&new_aeb->u.rb, parent, p);
+	rb_insert_color(&new_aeb->u.rb, &av->root);
+
+	return 0;
+}
+
+/**
+ * process_pool_aeb - we found a non-empty PEB in a pool.
+ * @ubi: UBI device object
+ * @ai: attach info object
+ * @new_vh: the volume header derived from new_aeb
+ * @new_aeb: the AEB to be examined
+ *
+ * Returns 0 on success, < 0 indicates an internal error.
+ */
+static int process_pool_aeb(struct ubi_device *ubi, struct ubi_attach_info *ai,
+			    struct ubi_vid_hdr *new_vh,
+			    struct ubi_ainf_peb *new_aeb)
+{
+	struct ubi_ainf_volume *av, *tmp_av = NULL;
+	struct rb_node **p = &ai->volumes.rb_node, *parent = NULL;
+	int found = 0;
+
+	if (be32_to_cpu(new_vh->vol_id) == UBI_FM_SB_VOLUME_ID ||
+		be32_to_cpu(new_vh->vol_id) == UBI_FM_DATA_VOLUME_ID) {
+		kmem_cache_free(ai->aeb_slab_cache, new_aeb);
+
+		return 0;
+	}
+
+	/* Find the volume this SEB belongs to */
+	while (*p) {
+		parent = *p;
+		tmp_av = rb_entry(parent, struct ubi_ainf_volume, rb);
+
+		if (be32_to_cpu(new_vh->vol_id) > tmp_av->vol_id)
+			p = &(*p)->rb_left;
+		else if (be32_to_cpu(new_vh->vol_id) < tmp_av->vol_id)
+			p = &(*p)->rb_right;
+		else {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found)
+		av = tmp_av;
+	else {
+		ubi_err("orphaned volume in fastmap pool!");
+		return UBI_BAD_FASTMAP;
+	}
+
+	ubi_assert(be32_to_cpu(new_vh->vol_id) == av->vol_id);
+
+	return update_vol(ubi, ai, av, new_vh, new_aeb);
+}
+
+/**
+ * unmap_peb - unmap a PEB.
+ * If fastmap detects a free PEB in the pool it has to check whether
+ * this PEB has been unmapped after writing the fastmap.
+ *
+ * @ai: UBI attach info object
+ * @pnum: The PEB to be unmapped
+ */
+static void unmap_peb(struct ubi_attach_info *ai, int pnum)
+{
+	struct ubi_ainf_volume *av;
+	struct rb_node *node, *node2;
+	struct ubi_ainf_peb *aeb;
+
+	for (node = rb_first(&ai->volumes); node; node = rb_next(node)) {
+		av = rb_entry(node, struct ubi_ainf_volume, rb);
+
+		for (node2 = rb_first(&av->root); node2;
+		     node2 = rb_next(node2)) {
+			aeb = rb_entry(node2, struct ubi_ainf_peb, u.rb);
+			if (aeb->pnum == pnum) {
+				rb_erase(&aeb->u.rb, &av->root);
+				kmem_cache_free(ai->aeb_slab_cache, aeb);
+				return;
+			}
+		}
+	}
+}
+
+/**
+ * scan_pool - scans a pool for changed (no longer empty PEBs).
+ * @ubi: UBI device object
+ * @ai: attach info object
+ * @pebs: an array of all PEB numbers in the to be scanned pool
+ * @pool_size: size of the pool (number of entries in @pebs)
+ * @max_sqnum: pointer to the maximal sequence number
+ * @eba_orphans: list of PEBs which need to be scanned
+ * @free: list of PEBs which are most likely free (and go into @ai->free)
+ *
+ * Returns 0 on success, if the pool is unusable UBI_BAD_FASTMAP is returned.
+ * < 0 indicates an internal error.
+ */
+#ifndef __UBOOT__
+static int scan_pool(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		     int *pebs, int pool_size, unsigned long long *max_sqnum,
+		     struct list_head *eba_orphans, struct list_head *freef)
+#else
+static int scan_pool(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		     __be32 *pebs, int pool_size, unsigned long long *max_sqnum,
+		     struct list_head *eba_orphans, struct list_head *freef)
+#endif
+{
+	struct ubi_vid_hdr *vh;
+	struct ubi_ec_hdr *ech;
+	struct ubi_ainf_peb *new_aeb, *tmp_aeb;
+	int i, pnum, err, found_orphan, ret = 0;
+
+	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ech)
+		return -ENOMEM;
+
+	vh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+	if (!vh) {
+		kfree(ech);
+		return -ENOMEM;
+	}
+
+	dbg_bld("scanning fastmap pool: size = %i", pool_size);
+
+	/*
+	 * Now scan all PEBs in the pool to find changes which have been made
+	 * after the creation of the fastmap
+	 */
+	for (i = 0; i < pool_size; i++) {
+		int scrub = 0;
+		int image_seq;
+
+		pnum = be32_to_cpu(pebs[i]);
+
+		if (ubi_io_is_bad(ubi, pnum)) {
+			ubi_err("bad PEB in fastmap pool!");
+			ret = UBI_BAD_FASTMAP;
+			goto out;
+		}
+
+		err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
+		if (err && err != UBI_IO_BITFLIPS) {
+			ubi_err("unable to read EC header! PEB:%i err:%i",
+				pnum, err);
+			ret = err > 0 ? UBI_BAD_FASTMAP : err;
+			goto out;
+		} else if (ret == UBI_IO_BITFLIPS)
+			scrub = 1;
+
+		/*
+		 * Older UBI implementations have image_seq set to zero, so
+		 * we shouldn't fail if image_seq == 0.
+		 */
+		image_seq = be32_to_cpu(ech->image_seq);
+
+		if (image_seq && (image_seq != ubi->image_seq)) {
+			ubi_err("bad image seq: 0x%x, expected: 0x%x",
+				be32_to_cpu(ech->image_seq), ubi->image_seq);
+			ret = UBI_BAD_FASTMAP;
+			goto out;
+		}
+
+		err = ubi_io_read_vid_hdr(ubi, pnum, vh, 0);
+		if (err == UBI_IO_FF || err == UBI_IO_FF_BITFLIPS) {
+			unsigned long long ec = be64_to_cpu(ech->ec);
+			unmap_peb(ai, pnum);
+			dbg_bld("Adding PEB to free: %i", pnum);
+			if (err == UBI_IO_FF_BITFLIPS)
+				add_aeb(ai, freef, pnum, ec, 1);
+			else
+				add_aeb(ai, freef, pnum, ec, 0);
+			continue;
+		} else if (err == 0 || err == UBI_IO_BITFLIPS) {
+			dbg_bld("Found non empty PEB:%i in pool", pnum);
+
+			if (err == UBI_IO_BITFLIPS)
+				scrub = 1;
+
+			found_orphan = 0;
+			list_for_each_entry(tmp_aeb, eba_orphans, u.list) {
+				if (tmp_aeb->pnum == pnum) {
+					found_orphan = 1;
+					break;
+				}
+			}
+			if (found_orphan) {
+				list_del(&tmp_aeb->u.list);
+				kmem_cache_free(ai->aeb_slab_cache, tmp_aeb);
+			}
+
+			new_aeb = kmem_cache_alloc(ai->aeb_slab_cache,
+						   GFP_KERNEL);
+			if (!new_aeb) {
+				ret = -ENOMEM;
+				goto out;
+			}
+
+			new_aeb->ec = be64_to_cpu(ech->ec);
+			new_aeb->pnum = pnum;
+			new_aeb->lnum = be32_to_cpu(vh->lnum);
+			new_aeb->sqnum = be64_to_cpu(vh->sqnum);
+			new_aeb->copy_flag = vh->copy_flag;
+			new_aeb->scrub = scrub;
+
+			if (*max_sqnum < new_aeb->sqnum)
+				*max_sqnum = new_aeb->sqnum;
+
+			err = process_pool_aeb(ubi, ai, vh, new_aeb);
+			if (err) {
+				ret = err > 0 ? UBI_BAD_FASTMAP : err;
+				goto out;
+			}
+		} else {
+			/* We are paranoid and fall back to scanning mode */
+			ubi_err("fastmap pool PEBs contains damaged PEBs!");
+			ret = err > 0 ? UBI_BAD_FASTMAP : err;
+			goto out;
+		}
+
+	}
+
+out:
+	ubi_free_vid_hdr(ubi, vh);
+	kfree(ech);
+	return ret;
+}
+
+/**
+ * count_fastmap_pebs - Counts the PEBs found by fastmap.
+ * @ai: The UBI attach info object
+ */
+static int count_fastmap_pebs(struct ubi_attach_info *ai)
+{
+	struct ubi_ainf_peb *aeb;
+	struct ubi_ainf_volume *av;
+	struct rb_node *rb1, *rb2;
+	int n = 0;
+
+	list_for_each_entry(aeb, &ai->erase, u.list)
+		n++;
+
+	list_for_each_entry(aeb, &ai->free, u.list)
+		n++;
+
+	 ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb)
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb)
+			n++;
+
+	return n;
+}
+
+/**
+ * ubi_attach_fastmap - creates ubi_attach_info from a fastmap.
+ * @ubi: UBI device object
+ * @ai: UBI attach info object
+ * @fm: the fastmap to be attached
+ *
+ * Returns 0 on success, UBI_BAD_FASTMAP if the found fastmap was unusable.
+ * < 0 indicates an internal error.
+ */
+static int ubi_attach_fastmap(struct ubi_device *ubi,
+			      struct ubi_attach_info *ai,
+			      struct ubi_fastmap_layout *fm)
+{
+	struct list_head used, eba_orphans, freef;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb, *tmp_aeb, *_tmp_aeb;
+	struct ubi_ec_hdr *ech;
+	struct ubi_fm_sb *fmsb;
+	struct ubi_fm_hdr *fmhdr;
+	struct ubi_fm_scan_pool *fmpl1, *fmpl2;
+	struct ubi_fm_ec *fmec;
+	struct ubi_fm_volhdr *fmvhdr;
+	struct ubi_fm_eba *fm_eba;
+	int ret, i, j, pool_size, wl_pool_size;
+	size_t fm_pos = 0, fm_size = ubi->fm_size;
+	unsigned long long max_sqnum = 0;
+	void *fm_raw = ubi->fm_buf;
+
+	INIT_LIST_HEAD(&used);
+	INIT_LIST_HEAD(&freef);
+	INIT_LIST_HEAD(&eba_orphans);
+	INIT_LIST_HEAD(&ai->corr);
+	INIT_LIST_HEAD(&ai->free);
+	INIT_LIST_HEAD(&ai->erase);
+	INIT_LIST_HEAD(&ai->alien);
+	ai->volumes = RB_ROOT;
+	ai->min_ec = UBI_MAX_ERASECOUNTER;
+
+	ai->aeb_slab_cache = kmem_cache_create("ubi_ainf_peb_slab",
+					       sizeof(struct ubi_ainf_peb),
+					       0, 0, NULL);
+	if (!ai->aeb_slab_cache) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	fmsb = (struct ubi_fm_sb *)(fm_raw);
+	ai->max_sqnum = fmsb->sqnum;
+	fm_pos += sizeof(struct ubi_fm_sb);
+	if (fm_pos >= fm_size)
+		goto fail_bad;
+
+	fmhdr = (struct ubi_fm_hdr *)(fm_raw + fm_pos);
+	fm_pos += sizeof(*fmhdr);
+	if (fm_pos >= fm_size)
+		goto fail_bad;
+
+	if (be32_to_cpu(fmhdr->magic) != UBI_FM_HDR_MAGIC) {
+		ubi_err("bad fastmap header magic: 0x%x, expected: 0x%x",
+			be32_to_cpu(fmhdr->magic), UBI_FM_HDR_MAGIC);
+		goto fail_bad;
+	}
+
+	fmpl1 = (struct ubi_fm_scan_pool *)(fm_raw + fm_pos);
+	fm_pos += sizeof(*fmpl1);
+	if (fm_pos >= fm_size)
+		goto fail_bad;
+	if (be32_to_cpu(fmpl1->magic) != UBI_FM_POOL_MAGIC) {
+		ubi_err("bad fastmap pool magic: 0x%x, expected: 0x%x",
+			be32_to_cpu(fmpl1->magic), UBI_FM_POOL_MAGIC);
+		goto fail_bad;
+	}
+
+	fmpl2 = (struct ubi_fm_scan_pool *)(fm_raw + fm_pos);
+	fm_pos += sizeof(*fmpl2);
+	if (fm_pos >= fm_size)
+		goto fail_bad;
+	if (be32_to_cpu(fmpl2->magic) != UBI_FM_POOL_MAGIC) {
+		ubi_err("bad fastmap pool magic: 0x%x, expected: 0x%x",
+			be32_to_cpu(fmpl2->magic), UBI_FM_POOL_MAGIC);
+		goto fail_bad;
+	}
+
+	pool_size = be16_to_cpu(fmpl1->size);
+	wl_pool_size = be16_to_cpu(fmpl2->size);
+	fm->max_pool_size = be16_to_cpu(fmpl1->max_size);
+	fm->max_wl_pool_size = be16_to_cpu(fmpl2->max_size);
+
+	if (pool_size > UBI_FM_MAX_POOL_SIZE || pool_size < 0) {
+		ubi_err("bad pool size: %i", pool_size);
+		goto fail_bad;
+	}
+
+	if (wl_pool_size > UBI_FM_MAX_POOL_SIZE || wl_pool_size < 0) {
+		ubi_err("bad WL pool size: %i", wl_pool_size);
+		goto fail_bad;
+	}
+
+
+	if (fm->max_pool_size > UBI_FM_MAX_POOL_SIZE ||
+	    fm->max_pool_size < 0) {
+		ubi_err("bad maximal pool size: %i", fm->max_pool_size);
+		goto fail_bad;
+	}
+
+	if (fm->max_wl_pool_size > UBI_FM_MAX_POOL_SIZE ||
+	    fm->max_wl_pool_size < 0) {
+		ubi_err("bad maximal WL pool size: %i", fm->max_wl_pool_size);
+		goto fail_bad;
+	}
+
+	/* read EC values from free list */
+	for (i = 0; i < be32_to_cpu(fmhdr->free_peb_count); i++) {
+		fmec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fmec);
+		if (fm_pos >= fm_size)
+			goto fail_bad;
+
+		add_aeb(ai, &ai->free, be32_to_cpu(fmec->pnum),
+			be32_to_cpu(fmec->ec), 0);
+	}
+
+	/* read EC values from used list */
+	for (i = 0; i < be32_to_cpu(fmhdr->used_peb_count); i++) {
+		fmec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fmec);
+		if (fm_pos >= fm_size)
+			goto fail_bad;
+
+		add_aeb(ai, &used, be32_to_cpu(fmec->pnum),
+			be32_to_cpu(fmec->ec), 0);
+	}
+
+	/* read EC values from scrub list */
+	for (i = 0; i < be32_to_cpu(fmhdr->scrub_peb_count); i++) {
+		fmec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fmec);
+		if (fm_pos >= fm_size)
+			goto fail_bad;
+
+		add_aeb(ai, &used, be32_to_cpu(fmec->pnum),
+			be32_to_cpu(fmec->ec), 1);
+	}
+
+	/* read EC values from erase list */
+	for (i = 0; i < be32_to_cpu(fmhdr->erase_peb_count); i++) {
+		fmec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fmec);
+		if (fm_pos >= fm_size)
+			goto fail_bad;
+
+		add_aeb(ai, &ai->erase, be32_to_cpu(fmec->pnum),
+			be32_to_cpu(fmec->ec), 1);
+	}
+
+	ai->mean_ec = div_u64(ai->ec_sum, ai->ec_count);
+	ai->bad_peb_count = be32_to_cpu(fmhdr->bad_peb_count);
+
+	/* Iterate over all volumes and read their EBA table */
+	for (i = 0; i < be32_to_cpu(fmhdr->vol_count); i++) {
+		fmvhdr = (struct ubi_fm_volhdr *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fmvhdr);
+		if (fm_pos >= fm_size)
+			goto fail_bad;
+
+		if (be32_to_cpu(fmvhdr->magic) != UBI_FM_VHDR_MAGIC) {
+			ubi_err("bad fastmap vol header magic: 0x%x, " \
+				"expected: 0x%x",
+				be32_to_cpu(fmvhdr->magic), UBI_FM_VHDR_MAGIC);
+			goto fail_bad;
+		}
+
+		av = add_vol(ai, be32_to_cpu(fmvhdr->vol_id),
+			     be32_to_cpu(fmvhdr->used_ebs),
+			     be32_to_cpu(fmvhdr->data_pad),
+			     fmvhdr->vol_type,
+			     be32_to_cpu(fmvhdr->last_eb_bytes));
+
+		if (!av)
+			goto fail_bad;
+
+		ai->vols_found++;
+		if (ai->highest_vol_id < be32_to_cpu(fmvhdr->vol_id))
+			ai->highest_vol_id = be32_to_cpu(fmvhdr->vol_id);
+
+		fm_eba = (struct ubi_fm_eba *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fm_eba);
+		fm_pos += (sizeof(__be32) * be32_to_cpu(fm_eba->reserved_pebs));
+		if (fm_pos >= fm_size)
+			goto fail_bad;
+
+		if (be32_to_cpu(fm_eba->magic) != UBI_FM_EBA_MAGIC) {
+			ubi_err("bad fastmap EBA header magic: 0x%x, " \
+				"expected: 0x%x",
+				be32_to_cpu(fm_eba->magic), UBI_FM_EBA_MAGIC);
+			goto fail_bad;
+		}
+
+		for (j = 0; j < be32_to_cpu(fm_eba->reserved_pebs); j++) {
+			int pnum = be32_to_cpu(fm_eba->pnum[j]);
+
+			if ((int)be32_to_cpu(fm_eba->pnum[j]) < 0)
+				continue;
+
+			aeb = NULL;
+			list_for_each_entry(tmp_aeb, &used, u.list) {
+				if (tmp_aeb->pnum == pnum) {
+					aeb = tmp_aeb;
+					break;
+				}
+			}
+
+			/* This can happen if a PEB is already in an EBA known
+			 * by this fastmap but the PEB itself is not in the used
+			 * list.
+			 * In this case the PEB can be within the fastmap pool
+			 * or while writing the fastmap it was in the protection
+			 * queue.
+			 */
+			if (!aeb) {
+				aeb = kmem_cache_alloc(ai->aeb_slab_cache,
+						       GFP_KERNEL);
+				if (!aeb) {
+					ret = -ENOMEM;
+
+					goto fail;
+				}
+
+				aeb->lnum = j;
+				aeb->pnum = be32_to_cpu(fm_eba->pnum[j]);
+				aeb->ec = -1;
+				aeb->scrub = aeb->copy_flag = aeb->sqnum = 0;
+				list_add_tail(&aeb->u.list, &eba_orphans);
+				continue;
+			}
+
+			aeb->lnum = j;
+
+			if (av->highest_lnum <= aeb->lnum)
+				av->highest_lnum = aeb->lnum;
+
+			assign_aeb_to_av(ai, aeb, av);
+
+			dbg_bld("inserting PEB:%i (LEB %i) to vol %i",
+				aeb->pnum, aeb->lnum, av->vol_id);
+		}
+
+		ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+		if (!ech) {
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &eba_orphans,
+					 u.list) {
+			int err;
+
+			if (ubi_io_is_bad(ubi, tmp_aeb->pnum)) {
+				ubi_err("bad PEB in fastmap EBA orphan list");
+				ret = UBI_BAD_FASTMAP;
+				kfree(ech);
+				goto fail;
+			}
+
+			err = ubi_io_read_ec_hdr(ubi, tmp_aeb->pnum, ech, 0);
+			if (err && err != UBI_IO_BITFLIPS) {
+				ubi_err("unable to read EC header! PEB:%i " \
+					"err:%i", tmp_aeb->pnum, err);
+				ret = err > 0 ? UBI_BAD_FASTMAP : err;
+				kfree(ech);
+
+				goto fail;
+			} else if (err == UBI_IO_BITFLIPS)
+				tmp_aeb->scrub = 1;
+
+			tmp_aeb->ec = be64_to_cpu(ech->ec);
+			assign_aeb_to_av(ai, tmp_aeb, av);
+		}
+
+		kfree(ech);
+	}
+
+	ret = scan_pool(ubi, ai, fmpl1->pebs, pool_size, &max_sqnum,
+			&eba_orphans, &freef);
+	if (ret)
+		goto fail;
+
+	ret = scan_pool(ubi, ai, fmpl2->pebs, wl_pool_size, &max_sqnum,
+			&eba_orphans, &freef);
+	if (ret)
+		goto fail;
+
+	if (max_sqnum > ai->max_sqnum)
+		ai->max_sqnum = max_sqnum;
+
+	list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &freef, u.list)
+		list_move_tail(&tmp_aeb->u.list, &ai->free);
+
+	ubi_assert(list_empty(&used));
+	ubi_assert(list_empty(&eba_orphans));
+	ubi_assert(list_empty(&freef));
+
+	/*
+	 * If fastmap is leaking PEBs (must not happen), raise a
+	 * fat warning and fall back to scanning mode.
+	 * We do this here because in ubi_wl_init() it's too late
+	 * and we cannot fall back to scanning.
+	 */
+#ifndef __UBOOT__
+	if (WARN_ON(count_fastmap_pebs(ai) != ubi->peb_count -
+		    ai->bad_peb_count - fm->used_blocks))
+		goto fail_bad;
+#else
+	if (count_fastmap_pebs(ai) != ubi->peb_count -
+		    ai->bad_peb_count - fm->used_blocks) {
+		WARN_ON(1);
+		goto fail_bad;
+	}
+#endif
+
+	return 0;
+
+fail_bad:
+	ret = UBI_BAD_FASTMAP;
+fail:
+	list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &used, u.list) {
+		list_del(&tmp_aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, tmp_aeb);
+	}
+	list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &eba_orphans, u.list) {
+		list_del(&tmp_aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, tmp_aeb);
+	}
+	list_for_each_entry_safe(tmp_aeb, _tmp_aeb, &freef, u.list) {
+		list_del(&tmp_aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, tmp_aeb);
+	}
+
+	return ret;
+}
+
+/**
+ * ubi_scan_fastmap - scan the fastmap.
+ * @ubi: UBI device object
+ * @ai: UBI attach info to be filled
+ * @fm_anchor: The fastmap starts at this PEB
+ *
+ * Returns 0 on success, UBI_NO_FASTMAP if no fastmap was found,
+ * UBI_BAD_FASTMAP if one was found but is not usable.
+ * < 0 indicates an internal error.
+ */
+int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		     int fm_anchor)
+{
+	struct ubi_fm_sb *fmsb, *fmsb2;
+	struct ubi_vid_hdr *vh;
+	struct ubi_ec_hdr *ech;
+	struct ubi_fastmap_layout *fm;
+	int i, used_blocks, pnum, ret = 0;
+	size_t fm_size;
+	__be32 crc, tmp_crc;
+	unsigned long long sqnum = 0;
+
+	mutex_lock(&ubi->fm_mutex);
+	memset(ubi->fm_buf, 0, ubi->fm_size);
+
+	fmsb = kmalloc(sizeof(*fmsb), GFP_KERNEL);
+	if (!fmsb) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	fm = kzalloc(sizeof(*fm), GFP_KERNEL);
+	if (!fm) {
+		ret = -ENOMEM;
+		kfree(fmsb);
+		goto out;
+	}
+
+	ret = ubi_io_read(ubi, fmsb, fm_anchor, ubi->leb_start, sizeof(*fmsb));
+	if (ret && ret != UBI_IO_BITFLIPS)
+		goto free_fm_sb;
+	else if (ret == UBI_IO_BITFLIPS)
+		fm->to_be_tortured[0] = 1;
+
+	if (be32_to_cpu(fmsb->magic) != UBI_FM_SB_MAGIC) {
+		ubi_err("bad super block magic: 0x%x, expected: 0x%x",
+			be32_to_cpu(fmsb->magic), UBI_FM_SB_MAGIC);
+		ret = UBI_BAD_FASTMAP;
+		goto free_fm_sb;
+	}
+
+	if (fmsb->version != UBI_FM_FMT_VERSION) {
+		ubi_err("bad fastmap version: %i, expected: %i",
+			fmsb->version, UBI_FM_FMT_VERSION);
+		ret = UBI_BAD_FASTMAP;
+		goto free_fm_sb;
+	}
+
+	used_blocks = be32_to_cpu(fmsb->used_blocks);
+	if (used_blocks > UBI_FM_MAX_BLOCKS || used_blocks < 1) {
+		ubi_err("number of fastmap blocks is invalid: %i", used_blocks);
+		ret = UBI_BAD_FASTMAP;
+		goto free_fm_sb;
+	}
+
+	fm_size = ubi->leb_size * used_blocks;
+	if (fm_size != ubi->fm_size) {
+		ubi_err("bad fastmap size: %zi, expected: %zi", fm_size,
+			ubi->fm_size);
+		ret = UBI_BAD_FASTMAP;
+		goto free_fm_sb;
+	}
+
+	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ech) {
+		ret = -ENOMEM;
+		goto free_fm_sb;
+	}
+
+	vh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+	if (!vh) {
+		ret = -ENOMEM;
+		goto free_hdr;
+	}
+
+	for (i = 0; i < used_blocks; i++) {
+		int image_seq;
+
+		pnum = be32_to_cpu(fmsb->block_loc[i]);
+
+		if (ubi_io_is_bad(ubi, pnum)) {
+			ret = UBI_BAD_FASTMAP;
+			goto free_hdr;
+		}
+
+		ret = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
+		if (ret && ret != UBI_IO_BITFLIPS) {
+			ubi_err("unable to read fastmap block# %i EC (PEB: %i)",
+				i, pnum);
+			if (ret > 0)
+				ret = UBI_BAD_FASTMAP;
+			goto free_hdr;
+		} else if (ret == UBI_IO_BITFLIPS)
+			fm->to_be_tortured[i] = 1;
+
+		image_seq = be32_to_cpu(ech->image_seq);
+		if (!ubi->image_seq)
+			ubi->image_seq = image_seq;
+
+		/*
+		 * Older UBI implementations have image_seq set to zero, so
+		 * we shouldn't fail if image_seq == 0.
+		 */
+		if (image_seq && (image_seq != ubi->image_seq)) {
+			ubi_err("wrong image seq:%d instead of %d",
+				be32_to_cpu(ech->image_seq), ubi->image_seq);
+			ret = UBI_BAD_FASTMAP;
+			goto free_hdr;
+		}
+
+		ret = ubi_io_read_vid_hdr(ubi, pnum, vh, 0);
+		if (ret && ret != UBI_IO_BITFLIPS) {
+			ubi_err("unable to read fastmap block# %i (PEB: %i)",
+				i, pnum);
+			goto free_hdr;
+		}
+
+		if (i == 0) {
+			if (be32_to_cpu(vh->vol_id) != UBI_FM_SB_VOLUME_ID) {
+				ubi_err("bad fastmap anchor vol_id: 0x%x," \
+					" expected: 0x%x",
+					be32_to_cpu(vh->vol_id),
+					UBI_FM_SB_VOLUME_ID);
+				ret = UBI_BAD_FASTMAP;
+				goto free_hdr;
+			}
+		} else {
+			if (be32_to_cpu(vh->vol_id) != UBI_FM_DATA_VOLUME_ID) {
+				ubi_err("bad fastmap data vol_id: 0x%x," \
+					" expected: 0x%x",
+					be32_to_cpu(vh->vol_id),
+					UBI_FM_DATA_VOLUME_ID);
+				ret = UBI_BAD_FASTMAP;
+				goto free_hdr;
+			}
+		}
+
+		if (sqnum < be64_to_cpu(vh->sqnum))
+			sqnum = be64_to_cpu(vh->sqnum);
+
+		ret = ubi_io_read(ubi, ubi->fm_buf + (ubi->leb_size * i), pnum,
+				  ubi->leb_start, ubi->leb_size);
+		if (ret && ret != UBI_IO_BITFLIPS) {
+			ubi_err("unable to read fastmap block# %i (PEB: %i, " \
+				"err: %i)", i, pnum, ret);
+			goto free_hdr;
+		}
+	}
+
+	kfree(fmsb);
+	fmsb = NULL;
+
+	fmsb2 = (struct ubi_fm_sb *)(ubi->fm_buf);
+	tmp_crc = be32_to_cpu(fmsb2->data_crc);
+	fmsb2->data_crc = 0;
+	crc = crc32(UBI_CRC32_INIT, ubi->fm_buf, fm_size);
+	if (crc != tmp_crc) {
+		ubi_err("fastmap data CRC is invalid");
+		ubi_err("CRC should be: 0x%x, calc: 0x%x", tmp_crc, crc);
+		ret = UBI_BAD_FASTMAP;
+		goto free_hdr;
+	}
+
+	fmsb2->sqnum = sqnum;
+
+	fm->used_blocks = used_blocks;
+
+	ret = ubi_attach_fastmap(ubi, ai, fm);
+	if (ret) {
+		if (ret > 0)
+			ret = UBI_BAD_FASTMAP;
+		goto free_hdr;
+	}
+
+	for (i = 0; i < used_blocks; i++) {
+		struct ubi_wl_entry *e;
+
+		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
+		if (!e) {
+			while (i--)
+				kfree(fm->e[i]);
+
+			ret = -ENOMEM;
+			goto free_hdr;
+		}
+
+		e->pnum = be32_to_cpu(fmsb2->block_loc[i]);
+		e->ec = be32_to_cpu(fmsb2->block_ec[i]);
+		fm->e[i] = e;
+	}
+
+	ubi->fm = fm;
+	ubi->fm_pool.max_size = ubi->fm->max_pool_size;
+	ubi->fm_wl_pool.max_size = ubi->fm->max_wl_pool_size;
+	ubi_msg("attached by fastmap");
+	ubi_msg("fastmap pool size: %d", ubi->fm_pool.max_size);
+	ubi_msg("fastmap WL pool size: %d", ubi->fm_wl_pool.max_size);
+	ubi->fm_disabled = 0;
+
+	ubi_free_vid_hdr(ubi, vh);
+	kfree(ech);
+out:
+	mutex_unlock(&ubi->fm_mutex);
+	if (ret == UBI_BAD_FASTMAP)
+		ubi_err("Attach by fastmap failed, doing a full scan!");
+	return ret;
+
+free_hdr:
+	ubi_free_vid_hdr(ubi, vh);
+	kfree(ech);
+free_fm_sb:
+	kfree(fmsb);
+	kfree(fm);
+	goto out;
+}
+
+/**
+ * ubi_write_fastmap - writes a fastmap.
+ * @ubi: UBI device object
+ * @new_fm: the to be written fastmap
+ *
+ * Returns 0 on success, < 0 indicates an internal error.
+ */
+static int ubi_write_fastmap(struct ubi_device *ubi,
+			     struct ubi_fastmap_layout *new_fm)
+{
+	size_t fm_pos = 0;
+	void *fm_raw;
+	struct ubi_fm_sb *fmsb;
+	struct ubi_fm_hdr *fmh;
+	struct ubi_fm_scan_pool *fmpl1, *fmpl2;
+	struct ubi_fm_ec *fec;
+	struct ubi_fm_volhdr *fvh;
+	struct ubi_fm_eba *feba;
+	struct rb_node *node;
+	struct ubi_wl_entry *wl_e;
+	struct ubi_volume *vol;
+	struct ubi_vid_hdr *avhdr, *dvhdr;
+	struct ubi_work *ubi_wrk;
+	int ret, i, j, free_peb_count, used_peb_count, vol_count;
+	int scrub_peb_count, erase_peb_count;
+
+	fm_raw = ubi->fm_buf;
+	memset(ubi->fm_buf, 0, ubi->fm_size);
+
+	avhdr = new_fm_vhdr(ubi, UBI_FM_SB_VOLUME_ID);
+	if (!avhdr) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	dvhdr = new_fm_vhdr(ubi, UBI_FM_DATA_VOLUME_ID);
+	if (!dvhdr) {
+		ret = -ENOMEM;
+		goto out_kfree;
+	}
+
+	spin_lock(&ubi->volumes_lock);
+	spin_lock(&ubi->wl_lock);
+
+	fmsb = (struct ubi_fm_sb *)fm_raw;
+	fm_pos += sizeof(*fmsb);
+	ubi_assert(fm_pos <= ubi->fm_size);
+
+	fmh = (struct ubi_fm_hdr *)(fm_raw + fm_pos);
+	fm_pos += sizeof(*fmh);
+	ubi_assert(fm_pos <= ubi->fm_size);
+
+	fmsb->magic = cpu_to_be32(UBI_FM_SB_MAGIC);
+	fmsb->version = UBI_FM_FMT_VERSION;
+	fmsb->used_blocks = cpu_to_be32(new_fm->used_blocks);
+	/* the max sqnum will be filled in while *reading* the fastmap */
+	fmsb->sqnum = 0;
+
+	fmh->magic = cpu_to_be32(UBI_FM_HDR_MAGIC);
+	free_peb_count = 0;
+	used_peb_count = 0;
+	scrub_peb_count = 0;
+	erase_peb_count = 0;
+	vol_count = 0;
+
+	fmpl1 = (struct ubi_fm_scan_pool *)(fm_raw + fm_pos);
+	fm_pos += sizeof(*fmpl1);
+	fmpl1->magic = cpu_to_be32(UBI_FM_POOL_MAGIC);
+	fmpl1->size = cpu_to_be16(ubi->fm_pool.size);
+	fmpl1->max_size = cpu_to_be16(ubi->fm_pool.max_size);
+
+	for (i = 0; i < ubi->fm_pool.size; i++)
+		fmpl1->pebs[i] = cpu_to_be32(ubi->fm_pool.pebs[i]);
+
+	fmpl2 = (struct ubi_fm_scan_pool *)(fm_raw + fm_pos);
+	fm_pos += sizeof(*fmpl2);
+	fmpl2->magic = cpu_to_be32(UBI_FM_POOL_MAGIC);
+	fmpl2->size = cpu_to_be16(ubi->fm_wl_pool.size);
+	fmpl2->max_size = cpu_to_be16(ubi->fm_wl_pool.max_size);
+
+	for (i = 0; i < ubi->fm_wl_pool.size; i++)
+		fmpl2->pebs[i] = cpu_to_be32(ubi->fm_wl_pool.pebs[i]);
+
+	for (node = rb_first(&ubi->free); node; node = rb_next(node)) {
+		wl_e = rb_entry(node, struct ubi_wl_entry, u.rb);
+		fec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+
+		fec->pnum = cpu_to_be32(wl_e->pnum);
+		fec->ec = cpu_to_be32(wl_e->ec);
+
+		free_peb_count++;
+		fm_pos += sizeof(*fec);
+		ubi_assert(fm_pos <= ubi->fm_size);
+	}
+	fmh->free_peb_count = cpu_to_be32(free_peb_count);
+
+	for (node = rb_first(&ubi->used); node; node = rb_next(node)) {
+		wl_e = rb_entry(node, struct ubi_wl_entry, u.rb);
+		fec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+
+		fec->pnum = cpu_to_be32(wl_e->pnum);
+		fec->ec = cpu_to_be32(wl_e->ec);
+
+		used_peb_count++;
+		fm_pos += sizeof(*fec);
+		ubi_assert(fm_pos <= ubi->fm_size);
+	}
+	fmh->used_peb_count = cpu_to_be32(used_peb_count);
+
+	for (node = rb_first(&ubi->scrub); node; node = rb_next(node)) {
+		wl_e = rb_entry(node, struct ubi_wl_entry, u.rb);
+		fec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+
+		fec->pnum = cpu_to_be32(wl_e->pnum);
+		fec->ec = cpu_to_be32(wl_e->ec);
+
+		scrub_peb_count++;
+		fm_pos += sizeof(*fec);
+		ubi_assert(fm_pos <= ubi->fm_size);
+	}
+	fmh->scrub_peb_count = cpu_to_be32(scrub_peb_count);
+
+
+	list_for_each_entry(ubi_wrk, &ubi->works, list) {
+		if (ubi_is_erase_work(ubi_wrk)) {
+			wl_e = ubi_wrk->e;
+			ubi_assert(wl_e);
+
+			fec = (struct ubi_fm_ec *)(fm_raw + fm_pos);
+
+			fec->pnum = cpu_to_be32(wl_e->pnum);
+			fec->ec = cpu_to_be32(wl_e->ec);
+
+			erase_peb_count++;
+			fm_pos += sizeof(*fec);
+			ubi_assert(fm_pos <= ubi->fm_size);
+		}
+	}
+	fmh->erase_peb_count = cpu_to_be32(erase_peb_count);
+
+	for (i = 0; i < UBI_MAX_VOLUMES + UBI_INT_VOL_COUNT; i++) {
+		vol = ubi->volumes[i];
+
+		if (!vol)
+			continue;
+
+		vol_count++;
+
+		fvh = (struct ubi_fm_volhdr *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*fvh);
+		ubi_assert(fm_pos <= ubi->fm_size);
+
+		fvh->magic = cpu_to_be32(UBI_FM_VHDR_MAGIC);
+		fvh->vol_id = cpu_to_be32(vol->vol_id);
+		fvh->vol_type = vol->vol_type;
+		fvh->used_ebs = cpu_to_be32(vol->used_ebs);
+		fvh->data_pad = cpu_to_be32(vol->data_pad);
+		fvh->last_eb_bytes = cpu_to_be32(vol->last_eb_bytes);
+
+		ubi_assert(vol->vol_type == UBI_DYNAMIC_VOLUME ||
+			vol->vol_type == UBI_STATIC_VOLUME);
+
+		feba = (struct ubi_fm_eba *)(fm_raw + fm_pos);
+		fm_pos += sizeof(*feba) + (sizeof(__be32) * vol->reserved_pebs);
+		ubi_assert(fm_pos <= ubi->fm_size);
+
+		for (j = 0; j < vol->reserved_pebs; j++)
+			feba->pnum[j] = cpu_to_be32(vol->eba_tbl[j]);
+
+		feba->reserved_pebs = cpu_to_be32(j);
+		feba->magic = cpu_to_be32(UBI_FM_EBA_MAGIC);
+	}
+	fmh->vol_count = cpu_to_be32(vol_count);
+	fmh->bad_peb_count = cpu_to_be32(ubi->bad_peb_count);
+
+	avhdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
+	avhdr->lnum = 0;
+
+	spin_unlock(&ubi->wl_lock);
+	spin_unlock(&ubi->volumes_lock);
+
+	dbg_bld("writing fastmap SB to PEB %i", new_fm->e[0]->pnum);
+	ret = ubi_io_write_vid_hdr(ubi, new_fm->e[0]->pnum, avhdr);
+	if (ret) {
+		ubi_err("unable to write vid_hdr to fastmap SB!");
+		goto out_kfree;
+	}
+
+	for (i = 0; i < new_fm->used_blocks; i++) {
+		fmsb->block_loc[i] = cpu_to_be32(new_fm->e[i]->pnum);
+		fmsb->block_ec[i] = cpu_to_be32(new_fm->e[i]->ec);
+	}
+
+	fmsb->data_crc = 0;
+	fmsb->data_crc = cpu_to_be32(crc32(UBI_CRC32_INIT, fm_raw,
+					   ubi->fm_size));
+
+	for (i = 1; i < new_fm->used_blocks; i++) {
+		dvhdr->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
+		dvhdr->lnum = cpu_to_be32(i);
+		dbg_bld("writing fastmap data to PEB %i sqnum %llu",
+			new_fm->e[i]->pnum, be64_to_cpu(dvhdr->sqnum));
+		ret = ubi_io_write_vid_hdr(ubi, new_fm->e[i]->pnum, dvhdr);
+		if (ret) {
+			ubi_err("unable to write vid_hdr to PEB %i!",
+				new_fm->e[i]->pnum);
+			goto out_kfree;
+		}
+	}
+
+	for (i = 0; i < new_fm->used_blocks; i++) {
+		ret = ubi_io_write(ubi, fm_raw + (i * ubi->leb_size),
+			new_fm->e[i]->pnum, ubi->leb_start, ubi->leb_size);
+		if (ret) {
+			ubi_err("unable to write fastmap to PEB %i!",
+				new_fm->e[i]->pnum);
+			goto out_kfree;
+		}
+	}
+
+	ubi_assert(new_fm);
+	ubi->fm = new_fm;
+
+	dbg_bld("fastmap written!");
+
+out_kfree:
+	ubi_free_vid_hdr(ubi, avhdr);
+	ubi_free_vid_hdr(ubi, dvhdr);
+out:
+	return ret;
+}
+
+/**
+ * erase_block - Manually erase a PEB.
+ * @ubi: UBI device object
+ * @pnum: PEB to be erased
+ *
+ * Returns the new EC value on success, < 0 indicates an internal error.
+ */
+static int erase_block(struct ubi_device *ubi, int pnum)
+{
+	int ret;
+	struct ubi_ec_hdr *ec_hdr;
+	long long ec;
+
+	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ec_hdr)
+		return -ENOMEM;
+
+	ret = ubi_io_read_ec_hdr(ubi, pnum, ec_hdr, 0);
+	if (ret < 0)
+		goto out;
+	else if (ret && ret != UBI_IO_BITFLIPS) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = ubi_io_sync_erase(ubi, pnum, 0);
+	if (ret < 0)
+		goto out;
+
+	ec = be64_to_cpu(ec_hdr->ec);
+	ec += ret;
+	if (ec > UBI_MAX_ERASECOUNTER) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ec_hdr->ec = cpu_to_be64(ec);
+	ret = ubi_io_write_ec_hdr(ubi, pnum, ec_hdr);
+	if (ret < 0)
+		goto out;
+
+	ret = ec;
+out:
+	kfree(ec_hdr);
+	return ret;
+}
+
+/**
+ * invalidate_fastmap - destroys a fastmap.
+ * @ubi: UBI device object
+ * @fm: the fastmap to be destroyed
+ *
+ * Returns 0 on success, < 0 indicates an internal error.
+ */
+static int invalidate_fastmap(struct ubi_device *ubi,
+			      struct ubi_fastmap_layout *fm)
+{
+	int ret;
+	struct ubi_vid_hdr *vh;
+
+	ret = erase_block(ubi, fm->e[0]->pnum);
+	if (ret < 0)
+		return ret;
+
+	vh = new_fm_vhdr(ubi, UBI_FM_SB_VOLUME_ID);
+	if (!vh)
+		return -ENOMEM;
+
+	/* deleting the current fastmap SB is not enough, an old SB may exist,
+	 * so create a (corrupted) SB such that fastmap will find it and fall
+	 * back to scanning mode in any case */
+	vh->sqnum = cpu_to_be64(ubi_next_sqnum(ubi));
+	ret = ubi_io_write_vid_hdr(ubi, fm->e[0]->pnum, vh);
+
+	return ret;
+}
+
+/**
+ * ubi_update_fastmap - will be called by UBI if a volume changes or
+ * a fastmap pool becomes full.
+ * @ubi: UBI device object
+ *
+ * Returns 0 on success, < 0 indicates an internal error.
+ */
+int ubi_update_fastmap(struct ubi_device *ubi)
+{
+	int ret, i;
+	struct ubi_fastmap_layout *new_fm, *old_fm;
+	struct ubi_wl_entry *tmp_e;
+
+	mutex_lock(&ubi->fm_mutex);
+
+	ubi_refill_pools(ubi);
+
+	if (ubi->ro_mode || ubi->fm_disabled) {
+		mutex_unlock(&ubi->fm_mutex);
+		return 0;
+	}
+
+	ret = ubi_ensure_anchor_pebs(ubi);
+	if (ret) {
+		mutex_unlock(&ubi->fm_mutex);
+		return ret;
+	}
+
+	new_fm = kzalloc(sizeof(*new_fm), GFP_KERNEL);
+	if (!new_fm) {
+		mutex_unlock(&ubi->fm_mutex);
+		return -ENOMEM;
+	}
+
+	new_fm->used_blocks = ubi->fm_size / ubi->leb_size;
+
+	for (i = 0; i < new_fm->used_blocks; i++) {
+		new_fm->e[i] = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
+		if (!new_fm->e[i]) {
+			while (i--)
+				kfree(new_fm->e[i]);
+
+			kfree(new_fm);
+			mutex_unlock(&ubi->fm_mutex);
+			return -ENOMEM;
+		}
+	}
+
+	old_fm = ubi->fm;
+	ubi->fm = NULL;
+
+	if (new_fm->used_blocks > UBI_FM_MAX_BLOCKS) {
+		ubi_err("fastmap too large");
+		ret = -ENOSPC;
+		goto err;
+	}
+
+	for (i = 1; i < new_fm->used_blocks; i++) {
+		spin_lock(&ubi->wl_lock);
+		tmp_e = ubi_wl_get_fm_peb(ubi, 0);
+		spin_unlock(&ubi->wl_lock);
+
+		if (!tmp_e && !old_fm) {
+			int j;
+			ubi_err("could not get any free erase block");
+
+			for (j = 1; j < i; j++)
+				ubi_wl_put_fm_peb(ubi, new_fm->e[j], j, 0);
+
+			ret = -ENOSPC;
+			goto err;
+		} else if (!tmp_e && old_fm) {
+			ret = erase_block(ubi, old_fm->e[i]->pnum);
+			if (ret < 0) {
+				int j;
+
+				for (j = 1; j < i; j++)
+					ubi_wl_put_fm_peb(ubi, new_fm->e[j],
+							  j, 0);
+
+				ubi_err("could not erase old fastmap PEB");
+				goto err;
+			}
+
+			new_fm->e[i]->pnum = old_fm->e[i]->pnum;
+			new_fm->e[i]->ec = old_fm->e[i]->ec;
+		} else {
+			new_fm->e[i]->pnum = tmp_e->pnum;
+			new_fm->e[i]->ec = tmp_e->ec;
+
+			if (old_fm)
+				ubi_wl_put_fm_peb(ubi, old_fm->e[i], i,
+						  old_fm->to_be_tortured[i]);
+		}
+	}
+
+	spin_lock(&ubi->wl_lock);
+	tmp_e = ubi_wl_get_fm_peb(ubi, 1);
+	spin_unlock(&ubi->wl_lock);
+
+	if (old_fm) {
+		/* no fresh anchor PEB was found, reuse the old one */
+		if (!tmp_e) {
+			ret = erase_block(ubi, old_fm->e[0]->pnum);
+			if (ret < 0) {
+				int i;
+				ubi_err("could not erase old anchor PEB");
+
+				for (i = 1; i < new_fm->used_blocks; i++)
+					ubi_wl_put_fm_peb(ubi, new_fm->e[i],
+							  i, 0);
+				goto err;
+			}
+
+			new_fm->e[0]->pnum = old_fm->e[0]->pnum;
+			new_fm->e[0]->ec = ret;
+		} else {
+			/* we've got a new anchor PEB, return the old one */
+			ubi_wl_put_fm_peb(ubi, old_fm->e[0], 0,
+					  old_fm->to_be_tortured[0]);
+
+			new_fm->e[0]->pnum = tmp_e->pnum;
+			new_fm->e[0]->ec = tmp_e->ec;
+		}
+	} else {
+		if (!tmp_e) {
+			int i;
+			ubi_err("could not find any anchor PEB");
+
+			for (i = 1; i < new_fm->used_blocks; i++)
+				ubi_wl_put_fm_peb(ubi, new_fm->e[i], i, 0);
+
+			ret = -ENOSPC;
+			goto err;
+		}
+
+		new_fm->e[0]->pnum = tmp_e->pnum;
+		new_fm->e[0]->ec = tmp_e->ec;
+	}
+
+	down_write(&ubi->work_sem);
+	down_write(&ubi->fm_sem);
+	ret = ubi_write_fastmap(ubi, new_fm);
+	up_write(&ubi->fm_sem);
+	up_write(&ubi->work_sem);
+
+	if (ret)
+		goto err;
+
+out_unlock:
+	mutex_unlock(&ubi->fm_mutex);
+	kfree(old_fm);
+	return ret;
+
+err:
+	kfree(new_fm);
+
+	ubi_warn("Unable to write new fastmap, err=%i", ret);
+
+	ret = 0;
+	if (old_fm) {
+		ret = invalidate_fastmap(ubi, old_fm);
+		if (ret < 0)
+			ubi_err("Unable to invalidiate current fastmap!");
+		else if (ret)
+			ret = 0;
+	}
+	goto out_unlock;
+}
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 960befc..41d7eb7 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -1,22 +1,21 @@
 /*
  * Copyright (c) International Business Machines Corp., 2006
  * Copyright (c) Nokia Corporation, 2006, 2007
- *
  * SPDX-License-Identifier:	GPL-2.0+
  *
  * Author: Artem Bityutskiy (Битюцкий Артём)
  */
 
 /*
- * UBI input/output unit.
+ * UBI input/output sub-system.
  *
- * This unit provides a uniform way to work with all kinds of the underlying
- * MTD devices. It also implements handy functions for reading and writing UBI
- * headers.
+ * This sub-system provides a uniform way to work with all kinds of the
+ * underlying MTD devices. It also implements handy functions for reading and
+ * writing UBI headers.
  *
  * We are trying to have a paranoid mindset and not to trust to what we read
- * from the flash media in order to be more secure and robust. So this unit
- * validates every single header it reads from the flash media.
+ * from the flash media in order to be more secure and robust. So this
+ * sub-system validates every single header it reads from the flash media.
  *
  * Some words about how the eraseblock headers are stored.
  *
@@ -52,9 +51,9 @@
  * device, e.g., make @ubi->min_io_size = 512 in the example above?
  *
  * A: because when writing a sub-page, MTD still writes a full 2K page but the
- * bytes which are no relevant to the sub-page are 0xFF. So, basically, writing
- * 4x512 sub-pages is 4 times slower then writing one 2KiB NAND page. Thus, we
- * prefer to use sub-pages only for EV and VID headers.
+ * bytes which are not relevant to the sub-page are 0xFF. So, basically,
+ * writing 4x512 sub-pages is 4 times slower than writing one 2KiB NAND page.
+ * Thus, we prefer to use sub-pages only for EC and VID headers.
  *
  * As it was noted above, the VID header may start at a non-aligned offset.
  * For example, in case of a 2KiB page NAND flash with a 512 bytes sub-page,
@@ -67,39 +66,33 @@
  * 512-byte chunks, we have to allocate one more buffer and copy our VID header
  * to offset 448 of this buffer.
  *
- * The I/O unit does the following trick in order to avoid this extra copy.
- * It always allocates a @ubi->vid_hdr_alsize bytes buffer for the VID header
- * and returns a pointer to offset @ubi->vid_hdr_shift of this buffer. When the
- * VID header is being written out, it shifts the VID header pointer back and
- * writes the whole sub-page.
+ * The I/O sub-system does the following trick in order to avoid this extra
+ * copy. It always allocates a @ubi->vid_hdr_alsize bytes buffer for the VID
+ * header and returns a pointer to offset @ubi->vid_hdr_shift of this buffer.
+ * When the VID header is being written out, it shifts the VID header pointer
+ * back and writes the whole sub-page.
  */
 
-#ifdef UBI_LINUX
+#define __UBOOT__
+#ifndef __UBOOT__
 #include <linux/crc32.h>
 #include <linux/err.h>
+#include <linux/slab.h>
+#else
+#include <ubi_uboot.h>
 #endif
 
-#include <ubi_uboot.h>
 #include "ubi.h"
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum);
-static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum);
-static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
-				 const struct ubi_ec_hdr *ec_hdr);
-static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum);
-static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
-				  const struct ubi_vid_hdr *vid_hdr);
-static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
-				 int len);
-#else
-#define paranoid_check_not_bad(ubi, pnum) 0
-#define paranoid_check_peb_ec_hdr(ubi, pnum)  0
-#define paranoid_check_ec_hdr(ubi, pnum, ec_hdr)  0
-#define paranoid_check_peb_vid_hdr(ubi, pnum) 0
-#define paranoid_check_vid_hdr(ubi, pnum, vid_hdr) 0
-#define paranoid_check_all_ff(ubi, pnum, offset, len) 0
-#endif
+static int self_check_not_bad(const struct ubi_device *ubi, int pnum);
+static int self_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum);
+static int self_check_ec_hdr(const struct ubi_device *ubi, int pnum,
+			     const struct ubi_ec_hdr *ec_hdr);
+static int self_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum);
+static int self_check_vid_hdr(const struct ubi_device *ubi, int pnum,
+			      const struct ubi_vid_hdr *vid_hdr);
+static int self_check_write(struct ubi_device *ubi, const void *buf, int pnum,
+			    int offset, int len);
 
 /**
  * ubi_io_read - read data from a physical eraseblock.
@@ -136,51 +129,77 @@ int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset,
 	ubi_assert(offset >= 0 && offset + len <= ubi->peb_size);
 	ubi_assert(len > 0);
 
-	err = paranoid_check_not_bad(ubi, pnum);
+	err = self_check_not_bad(ubi, pnum);
 	if (err)
-		return err > 0 ? -EINVAL : err;
+		return err;
+
+	/*
+	 * Deliberately corrupt the buffer to improve robustness. Indeed, if we
+	 * do not do this, the following may happen:
+	 * 1. The buffer contains data from previous operation, e.g., read from
+	 *    another PEB previously. The data looks like expected, e.g., if we
+	 *    just do not read anything and return - the caller would not
+	 *    notice this. E.g., if we are reading a VID header, the buffer may
+	 *    contain a valid VID header from another PEB.
+	 * 2. The driver is buggy and returns us success or -EBADMSG or
+	 *    -EUCLEAN, but it does not actually put any data to the buffer.
+	 *
+	 * This may confuse UBI or upper layers - they may think the buffer
+	 * contains valid data while in fact it is just old data. This is
+	 * especially possible because UBI (and UBIFS) relies on CRC, and
+	 * treats data as correct even in case of ECC errors if the CRC is
+	 * correct.
+	 *
+	 * Try to prevent this situation by changing the first byte of the
+	 * buffer.
+	 */
+	*((uint8_t *)buf) ^= 0xFF;
 
 	addr = (loff_t)pnum * ubi->peb_size + offset;
 retry:
 	err = mtd_read(ubi->mtd, addr, len, &read, buf);
 	if (err) {
-		if (err == -EUCLEAN) {
+		const char *errstr = mtd_is_eccerr(err) ? " (ECC error)" : "";
+
+		if (mtd_is_bitflip(err)) {
 			/*
 			 * -EUCLEAN is reported if there was a bit-flip which
 			 * was corrected, so this is harmless.
+			 *
+			 * We do not report about it here unless debugging is
+			 * enabled. A corresponding message will be printed
+			 * later, when it is has been scrubbed.
 			 */
 			ubi_msg("fixable bit-flip detected at PEB %d", pnum);
 			ubi_assert(len == read);
 			return UBI_IO_BITFLIPS;
 		}
 
-		if (read != len && retries++ < UBI_IO_RETRIES) {
-			dbg_io("error %d while reading %d bytes from PEB %d:%d, "
-			       "read only %zd bytes, retry",
-			       err, len, pnum, offset, read);
+		if (retries++ < UBI_IO_RETRIES) {
+			ubi_warn("error %d%s while reading %d bytes from PEB %d:%d, read only %zd bytes, retry",
+				 err, errstr, len, pnum, offset, read);
 			yield();
 			goto retry;
 		}
 
-		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
-			"read %zd bytes", err, len, pnum, offset, read);
-		ubi_dbg_dump_stack();
+		ubi_err("error %d%s while reading %d bytes from PEB %d:%d, read %zd bytes",
+			err, errstr, len, pnum, offset, read);
+		dump_stack();
 
 		/*
 		 * The driver should never return -EBADMSG if it failed to read
 		 * all the requested data. But some buggy drivers might do
 		 * this, so we change it to -EIO.
 		 */
-		if (read != len && err == -EBADMSG) {
+		if (read != len && mtd_is_eccerr(err)) {
 			ubi_assert(0);
-			printk("%s[%d] not here\n", __func__, __LINE__);
-/*			err = -EIO; */
+			err = -EIO;
 		}
 	} else {
 		ubi_assert(len == read);
 
-		if (ubi_dbg_is_bitflip()) {
-			dbg_msg("bit-flip (emulated)");
+		if (ubi_dbg_is_bitflip(ubi)) {
+			dbg_gen("bit-flip (emulated)");
 			err = UBI_IO_BITFLIPS;
 		}
 	}
@@ -224,46 +243,60 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
 		return -EROFS;
 	}
 
-	/* The below has to be compiled out if paranoid checks are disabled */
-
-	err = paranoid_check_not_bad(ubi, pnum);
+	err = self_check_not_bad(ubi, pnum);
 	if (err)
-		return err > 0 ? -EINVAL : err;
+		return err;
 
 	/* The area we are writing to has to contain all 0xFF bytes */
-	err = paranoid_check_all_ff(ubi, pnum, offset, len);
+	err = ubi_self_check_all_ff(ubi, pnum, offset, len);
 	if (err)
-		return err > 0 ? -EINVAL : err;
+		return err;
 
 	if (offset >= ubi->leb_start) {
 		/*
 		 * We write to the data area of the physical eraseblock. Make
 		 * sure it has valid EC and VID headers.
 		 */
-		err = paranoid_check_peb_ec_hdr(ubi, pnum);
+		err = self_check_peb_ec_hdr(ubi, pnum);
 		if (err)
-			return err > 0 ? -EINVAL : err;
-		err = paranoid_check_peb_vid_hdr(ubi, pnum);
+			return err;
+		err = self_check_peb_vid_hdr(ubi, pnum);
 		if (err)
-			return err > 0 ? -EINVAL : err;
+			return err;
 	}
 
-	if (ubi_dbg_is_write_failure()) {
-		dbg_err("cannot write %d bytes to PEB %d:%d "
-			"(emulated)", len, pnum, offset);
-		ubi_dbg_dump_stack();
+	if (ubi_dbg_is_write_failure(ubi)) {
+		ubi_err("cannot write %d bytes to PEB %d:%d (emulated)",
+			len, pnum, offset);
+		dump_stack();
 		return -EIO;
 	}
 
 	addr = (loff_t)pnum * ubi->peb_size + offset;
 	err = mtd_write(ubi->mtd, addr, len, &written, buf);
 	if (err) {
-		ubi_err("error %d while writing %d bytes to PEB %d:%d, written"
-			" %zd bytes", err, len, pnum, offset, written);
-		ubi_dbg_dump_stack();
+		ubi_err("error %d while writing %d bytes to PEB %d:%d, written %zd bytes",
+			err, len, pnum, offset, written);
+		dump_stack();
+		ubi_dump_flash(ubi, pnum, offset, len);
 	} else
 		ubi_assert(written == len);
 
+	if (!err) {
+		err = self_check_write(ubi, buf, pnum, offset, len);
+		if (err)
+			return err;
+
+		/*
+		 * Since we always write sequentially, the rest of the PEB has
+		 * to contain only 0xFF bytes.
+		 */
+		offset += len;
+		len = ubi->peb_size - offset;
+		if (len)
+			err = ubi_self_check_all_ff(ubi, pnum, offset, len);
+	}
+
 	return err;
 }
 
@@ -295,6 +328,12 @@ static int do_sync_erase(struct ubi_device *ubi, int pnum)
 	wait_queue_head_t wq;
 
 	dbg_io("erase PEB %d", pnum);
+	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
+
+	if (ubi->ro_mode) {
+		ubi_err("read-only mode");
+		return -EROFS;
+	}
 
 retry:
 	init_waitqueue_head(&wq);
@@ -309,13 +348,13 @@ retry:
 	err = mtd_erase(ubi->mtd, &ei);
 	if (err) {
 		if (retries++ < UBI_IO_RETRIES) {
-			dbg_io("error %d while erasing PEB %d, retry",
-			       err, pnum);
+			ubi_warn("error %d while erasing PEB %d, retry",
+				 err, pnum);
 			yield();
 			goto retry;
 		}
 		ubi_err("cannot erase PEB %d, error %d", pnum, err);
-		ubi_dbg_dump_stack();
+		dump_stack();
 		return err;
 	}
 
@@ -328,46 +367,27 @@ retry:
 
 	if (ei.state == MTD_ERASE_FAILED) {
 		if (retries++ < UBI_IO_RETRIES) {
-			dbg_io("error while erasing PEB %d, retry", pnum);
+			ubi_warn("error while erasing PEB %d, retry", pnum);
 			yield();
 			goto retry;
 		}
 		ubi_err("cannot erase PEB %d", pnum);
-		ubi_dbg_dump_stack();
+		dump_stack();
 		return -EIO;
 	}
 
-	err = paranoid_check_all_ff(ubi, pnum, 0, ubi->peb_size);
+	err = ubi_self_check_all_ff(ubi, pnum, 0, ubi->peb_size);
 	if (err)
-		return err > 0 ? -EINVAL : err;
+		return err;
 
-	if (ubi_dbg_is_erase_failure() && !err) {
-		dbg_err("cannot erase PEB %d (emulated)", pnum);
+	if (ubi_dbg_is_erase_failure(ubi)) {
+		ubi_err("cannot erase PEB %d (emulated)", pnum);
 		return -EIO;
 	}
 
 	return 0;
 }
 
-/**
- * check_pattern - check if buffer contains only a certain byte pattern.
- * @buf: buffer to check
- * @patt: the pattern to check
- * @size: buffer size in bytes
- *
- * This function returns %1 in there are only @patt bytes in @buf, and %0 if
- * something else was also found.
- */
-static int check_pattern(const void *buf, uint8_t patt, int size)
-{
-	int i;
-
-	for (i = 0; i < size; i++)
-		if (((const uint8_t *)buf)[i] != patt)
-			return 0;
-	return 1;
-}
-
 /* Patterns to write to a physical eraseblock when torturing it */
 static uint8_t patterns[] = {0xa5, 0x5a, 0x0};
 
@@ -384,6 +404,7 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
 {
 	int err, i, patt_count;
 
+	ubi_msg("run torture test for PEB %d", pnum);
 	patt_count = ARRAY_SIZE(patterns);
 	ubi_assert(patt_count > 0);
 
@@ -394,11 +415,11 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
 			goto out;
 
 		/* Make sure the PEB contains only 0xFF bytes */
-		err = ubi_io_read(ubi, ubi->peb_buf1, pnum, 0, ubi->peb_size);
+		err = ubi_io_read(ubi, ubi->peb_buf, pnum, 0, ubi->peb_size);
 		if (err)
 			goto out;
 
-		err = check_pattern(ubi->peb_buf1, 0xFF, ubi->peb_size);
+		err = ubi_check_pattern(ubi->peb_buf, 0xFF, ubi->peb_size);
 		if (err == 0) {
 			ubi_err("erased PEB %d, but a non-0xFF byte found",
 				pnum);
@@ -407,17 +428,18 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
 		}
 
 		/* Write a pattern and check it */
-		memset(ubi->peb_buf1, patterns[i], ubi->peb_size);
-		err = ubi_io_write(ubi, ubi->peb_buf1, pnum, 0, ubi->peb_size);
+		memset(ubi->peb_buf, patterns[i], ubi->peb_size);
+		err = ubi_io_write(ubi, ubi->peb_buf, pnum, 0, ubi->peb_size);
 		if (err)
 			goto out;
 
-		memset(ubi->peb_buf1, ~patterns[i], ubi->peb_size);
-		err = ubi_io_read(ubi, ubi->peb_buf1, pnum, 0, ubi->peb_size);
+		memset(ubi->peb_buf, ~patterns[i], ubi->peb_size);
+		err = ubi_io_read(ubi, ubi->peb_buf, pnum, 0, ubi->peb_size);
 		if (err)
 			goto out;
 
-		err = check_pattern(ubi->peb_buf1, patterns[i], ubi->peb_size);
+		err = ubi_check_pattern(ubi->peb_buf, patterns[i],
+					ubi->peb_size);
 		if (err == 0) {
 			ubi_err("pattern %x checking failed for PEB %d",
 				patterns[i], pnum);
@@ -427,10 +449,11 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
 	}
 
 	err = patt_count;
+	ubi_msg("PEB %d passed torture test, do not mark it as bad", pnum);
 
 out:
 	mutex_unlock(&ubi->buf_mutex);
-	if (err == UBI_IO_BITFLIPS || err == -EBADMSG) {
+	if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) {
 		/*
 		 * If a bit-flip or data integrity error was detected, the test
 		 * has not passed because it happened on a freshly erased
@@ -444,6 +467,80 @@ out:
 }
 
 /**
+ * nor_erase_prepare - prepare a NOR flash PEB for erasure.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock number to prepare
+ *
+ * NOR flash, or at least some of them, have peculiar embedded PEB erasure
+ * algorithm: the PEB is first filled with zeroes, then it is erased. And
+ * filling with zeroes starts from the end of the PEB. This was observed with
+ * Spansion S29GL512N NOR flash.
+ *
+ * This means that in case of a power cut we may end up with intact data at the
+ * beginning of the PEB, and all zeroes at the end of PEB. In other words, the
+ * EC and VID headers are OK, but a large chunk of data at the end of PEB is
+ * zeroed. This makes UBI mistakenly treat this PEB as used and associate it
+ * with an LEB, which leads to subsequent failures (e.g., UBIFS fails).
+ *
+ * This function is called before erasing NOR PEBs and it zeroes out EC and VID
+ * magic numbers in order to invalidate them and prevent the failures. Returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
+{
+	int err;
+	size_t written;
+	loff_t addr;
+	uint32_t data = 0;
+	struct ubi_ec_hdr ec_hdr;
+
+	/*
+	 * Note, we cannot generally define VID header buffers on stack,
+	 * because of the way we deal with these buffers (see the header
+	 * comment in this file). But we know this is a NOR-specific piece of
+	 * code, so we can do this. But yes, this is error-prone and we should
+	 * (pre-)allocate VID header buffer instead.
+	 */
+	struct ubi_vid_hdr vid_hdr;
+
+	/*
+	 * If VID or EC is valid, we have to corrupt them before erasing.
+	 * It is important to first invalidate the EC header, and then the VID
+	 * header. Otherwise a power cut may lead to valid EC header and
+	 * invalid VID header, in which case UBI will treat this PEB as
+	 * corrupted and will try to preserve it, and print scary warnings.
+	 */
+	addr = (loff_t)pnum * ubi->peb_size;
+	err = ubi_io_read_ec_hdr(ubi, pnum, &ec_hdr, 0);
+	if (err != UBI_IO_BAD_HDR_EBADMSG && err != UBI_IO_BAD_HDR &&
+	    err != UBI_IO_FF){
+		err = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data);
+		if(err)
+			goto error;
+	}
+
+	err = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
+	if (err != UBI_IO_BAD_HDR_EBADMSG && err != UBI_IO_BAD_HDR &&
+	    err != UBI_IO_FF){
+		addr += ubi->vid_hdr_aloffset;
+		err = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data);
+		if (err)
+			goto error;
+	}
+	return 0;
+
+error:
+	/*
+	 * The PEB contains a valid VID or EC header, but we cannot invalidate
+	 * it. Supposedly the flash media or the driver is screwed up, so
+	 * return an error.
+	 */
+	ubi_err("cannot invalidate PEB %d, write returned %d", pnum, err);
+	ubi_dump_flash(ubi, pnum, 0, ubi->peb_size);
+	return -EIO;
+}
+
+/**
  * ubi_io_sync_erase - synchronously erase a physical eraseblock.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock number to erase
@@ -452,7 +549,7 @@ out:
  * This function synchronously erases physical eraseblock @pnum. If @torture
  * flag is not zero, the physical eraseblock is checked by means of writing
  * different patterns to it and reading them back. If the torturing is enabled,
- * the physical eraseblock is erased more then once.
+ * the physical eraseblock is erased more than once.
  *
  * This function returns the number of erasures made in case of success, %-EIO
  * if the erasure failed or the torturing test failed, and other negative error
@@ -465,15 +562,21 @@ int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture)
 
 	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
 
-	err = paranoid_check_not_bad(ubi, pnum);
+	err = self_check_not_bad(ubi, pnum);
 	if (err != 0)
-		return err > 0 ? -EINVAL : err;
+		return err;
 
 	if (ubi->ro_mode) {
 		ubi_err("read-only mode");
 		return -EROFS;
 	}
 
+	if (ubi->nor_flash) {
+		err = nor_erase_prepare(ubi, pnum);
+		if (err)
+			return err;
+	}
+
 	if (torture) {
 		ret = torture_peb(ubi, pnum);
 		if (ret < 0)
@@ -564,8 +667,7 @@ static int validate_ec_hdr(const struct ubi_device *ubi,
 	leb_start = be32_to_cpu(ec_hdr->data_offset);
 
 	if (ec_hdr->version != UBI_VERSION) {
-		ubi_err("node with incompatible UBI version found: "
-			"this UBI version is %d, image version is %d",
+		ubi_err("node with incompatible UBI version found: this UBI version is %d, image version is %d",
 			UBI_VERSION, (int)ec_hdr->version);
 		goto bad;
 	}
@@ -591,8 +693,8 @@ static int validate_ec_hdr(const struct ubi_device *ubi,
 
 bad:
 	ubi_err("bad EC header");
-	ubi_dbg_dump_ec_hdr(ec_hdr);
-	ubi_dbg_dump_stack();
+	ubi_dump_ec_hdr(ec_hdr);
+	dump_stack();
 	return 1;
 }
 
@@ -612,67 +714,58 @@ bad:
  * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
  *   and corrected by the flash driver; this is harmless but may indicate that
  *   this eraseblock may become bad soon (but may be not);
- * o %UBI_IO_BAD_EC_HDR if the erase counter header is corrupted (a CRC error);
- * o %UBI_IO_PEB_EMPTY if the physical eraseblock is empty;
+ * o %UBI_IO_BAD_HDR if the erase counter header is corrupted (a CRC error);
+ * o %UBI_IO_BAD_HDR_EBADMSG is the same as %UBI_IO_BAD_HDR, but there also was
+ *   a data integrity error (uncorrectable ECC error in case of NAND);
+ * o %UBI_IO_FF if only 0xFF bytes were read (the PEB is supposedly empty)
  * o a negative error code in case of failure.
  */
 int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		       struct ubi_ec_hdr *ec_hdr, int verbose)
 {
-	int err, read_err = 0;
+	int err, read_err;
 	uint32_t crc, magic, hdr_crc;
 
 	dbg_io("read EC header from PEB %d", pnum);
 	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
-	if (UBI_IO_DEBUG)
-		verbose = 1;
 
-	err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
-	if (err) {
-		if (err != UBI_IO_BITFLIPS && err != -EBADMSG)
-			return err;
+	read_err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
+	if (read_err) {
+		if (read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
+			return read_err;
 
 		/*
 		 * We read all the data, but either a correctable bit-flip
-		 * occurred, or MTD reported about some data integrity error,
-		 * like an ECC error in case of NAND. The former is harmless,
-		 * the later may mean that the read data is corrupted. But we
-		 * have a CRC check-sum and we will detect this. If the EC
-		 * header is still OK, we just report this as there was a
-		 * bit-flip.
+		 * occurred, or MTD reported a data integrity error
+		 * (uncorrectable ECC error in case of NAND). The former is
+		 * harmless, the later may mean that the read data is
+		 * corrupted. But we have a CRC check-sum and we will detect
+		 * this. If the EC header is still OK, we just report this as
+		 * there was a bit-flip, to force scrubbing.
 		 */
-		read_err = err;
 	}
 
 	magic = be32_to_cpu(ec_hdr->magic);
 	if (magic != UBI_EC_HDR_MAGIC) {
+		if (mtd_is_eccerr(read_err))
+			return UBI_IO_BAD_HDR_EBADMSG;
+
 		/*
 		 * The magic field is wrong. Let's check if we have read all
 		 * 0xFF. If yes, this physical eraseblock is assumed to be
 		 * empty.
-		 *
-		 * But if there was a read error, we do not test it for all
-		 * 0xFFs. Even if it does contain all 0xFFs, this error
-		 * indicates that something is still wrong with this physical
-		 * eraseblock and we anyway cannot treat it as empty.
 		 */
-		if (read_err != -EBADMSG &&
-		    check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
+		if (ubi_check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
 			/* The physical eraseblock is supposedly empty */
-
-			/*
-			 * The below is just a paranoid check, it has to be
-			 * compiled out if paranoid checks are disabled.
-			 */
-			err = paranoid_check_all_ff(ubi, pnum, 0,
-						    ubi->peb_size);
-			if (err)
-				return err > 0 ? UBI_IO_BAD_EC_HDR : err;
-
 			if (verbose)
-				ubi_warn("no EC header found at PEB %d, "
-					 "only 0xFF bytes", pnum);
-			return UBI_IO_PEB_EMPTY;
+				ubi_warn("no EC header found at PEB %d, only 0xFF bytes",
+					 pnum);
+			dbg_bld("no EC header found at PEB %d, only 0xFF bytes",
+				pnum);
+			if (!read_err)
+				return UBI_IO_FF;
+			else
+				return UBI_IO_FF_BITFLIPS;
 		}
 
 		/*
@@ -680,11 +773,13 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		 * 0xFF bytes. Report that the header is corrupted.
 		 */
 		if (verbose) {
-			ubi_warn("bad magic number at PEB %d: %08x instead of "
-				 "%08x", pnum, magic, UBI_EC_HDR_MAGIC);
-			ubi_dbg_dump_ec_hdr(ec_hdr);
+			ubi_warn("bad magic number at PEB %d: %08x instead of %08x",
+				 pnum, magic, UBI_EC_HDR_MAGIC);
+			ubi_dump_ec_hdr(ec_hdr);
 		}
-		return UBI_IO_BAD_EC_HDR;
+		dbg_bld("bad magic number at PEB %d: %08x instead of %08x",
+			pnum, magic, UBI_EC_HDR_MAGIC);
+		return UBI_IO_BAD_HDR;
 	}
 
 	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
@@ -692,11 +787,17 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 
 	if (hdr_crc != crc) {
 		if (verbose) {
-			ubi_warn("bad EC header CRC at PEB %d, calculated %#08x,"
-				 " read %#08x", pnum, crc, hdr_crc);
-			ubi_dbg_dump_ec_hdr(ec_hdr);
+			ubi_warn("bad EC header CRC at PEB %d, calculated %#08x, read %#08x",
+				 pnum, crc, hdr_crc);
+			ubi_dump_ec_hdr(ec_hdr);
 		}
-		return UBI_IO_BAD_EC_HDR;
+		dbg_bld("bad EC header CRC at PEB %d, calculated %#08x, read %#08x",
+			pnum, crc, hdr_crc);
+
+		if (!read_err)
+			return UBI_IO_BAD_HDR;
+		else
+			return UBI_IO_BAD_HDR_EBADMSG;
 	}
 
 	/* And of course validate what has just been read from the media */
@@ -706,6 +807,10 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		return -EINVAL;
 	}
 
+	/*
+	 * If there was %-EBADMSG, but the header CRC is still OK, report about
+	 * a bit-flip to force scrubbing on this PEB.
+	 */
 	return read_err ? UBI_IO_BITFLIPS : 0;
 }
 
@@ -737,12 +842,13 @@ int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum,
 	ec_hdr->version = UBI_VERSION;
 	ec_hdr->vid_hdr_offset = cpu_to_be32(ubi->vid_hdr_offset);
 	ec_hdr->data_offset = cpu_to_be32(ubi->leb_start);
+	ec_hdr->image_seq = cpu_to_be32(ubi->image_seq);
 	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
 	ec_hdr->hdr_crc = cpu_to_be32(crc);
 
-	err = paranoid_check_ec_hdr(ubi, pnum, ec_hdr);
+	err = self_check_ec_hdr(ubi, pnum, ec_hdr);
 	if (err)
-		return -EINVAL;
+		return err;
 
 	err = ubi_io_write(ubi, ec_hdr, pnum, 0, ubi->ec_hdr_alsize);
 	return err;
@@ -771,40 +877,40 @@ static int validate_vid_hdr(const struct ubi_device *ubi,
 	int usable_leb_size = ubi->leb_size - data_pad;
 
 	if (copy_flag != 0 && copy_flag != 1) {
-		dbg_err("bad copy_flag");
+		ubi_err("bad copy_flag");
 		goto bad;
 	}
 
 	if (vol_id < 0 || lnum < 0 || data_size < 0 || used_ebs < 0 ||
 	    data_pad < 0) {
-		dbg_err("negative values");
+		ubi_err("negative values");
 		goto bad;
 	}
 
 	if (vol_id >= UBI_MAX_VOLUMES && vol_id < UBI_INTERNAL_VOL_START) {
-		dbg_err("bad vol_id");
+		ubi_err("bad vol_id");
 		goto bad;
 	}
 
 	if (vol_id < UBI_INTERNAL_VOL_START && compat != 0) {
-		dbg_err("bad compat");
+		ubi_err("bad compat");
 		goto bad;
 	}
 
 	if (vol_id >= UBI_INTERNAL_VOL_START && compat != UBI_COMPAT_DELETE &&
 	    compat != UBI_COMPAT_RO && compat != UBI_COMPAT_PRESERVE &&
 	    compat != UBI_COMPAT_REJECT) {
-		dbg_err("bad compat");
+		ubi_err("bad compat");
 		goto bad;
 	}
 
 	if (vol_type != UBI_VID_DYNAMIC && vol_type != UBI_VID_STATIC) {
-		dbg_err("bad vol_type");
+		ubi_err("bad vol_type");
 		goto bad;
 	}
 
 	if (data_pad >= ubi->leb_size / 2) {
-		dbg_err("bad data_pad");
+		ubi_err("bad data_pad");
 		goto bad;
 	}
 
@@ -816,45 +922,45 @@ static int validate_vid_hdr(const struct ubi_device *ubi,
 		 * mapped logical eraseblocks.
 		 */
 		if (used_ebs == 0) {
-			dbg_err("zero used_ebs");
+			ubi_err("zero used_ebs");
 			goto bad;
 		}
 		if (data_size == 0) {
-			dbg_err("zero data_size");
+			ubi_err("zero data_size");
 			goto bad;
 		}
 		if (lnum < used_ebs - 1) {
 			if (data_size != usable_leb_size) {
-				dbg_err("bad data_size");
+				ubi_err("bad data_size");
 				goto bad;
 			}
 		} else if (lnum == used_ebs - 1) {
 			if (data_size == 0) {
-				dbg_err("bad data_size at last LEB");
+				ubi_err("bad data_size at last LEB");
 				goto bad;
 			}
 		} else {
-			dbg_err("too high lnum");
+			ubi_err("too high lnum");
 			goto bad;
 		}
 	} else {
 		if (copy_flag == 0) {
 			if (data_crc != 0) {
-				dbg_err("non-zero data CRC");
+				ubi_err("non-zero data CRC");
 				goto bad;
 			}
 			if (data_size != 0) {
-				dbg_err("non-zero data_size");
+				ubi_err("non-zero data_size");
 				goto bad;
 			}
 		} else {
 			if (data_size == 0) {
-				dbg_err("zero data_size of copy");
+				ubi_err("zero data_size of copy");
 				goto bad;
 			}
 		}
 		if (used_ebs != 0) {
-			dbg_err("bad used_ebs");
+			ubi_err("bad used_ebs");
 			goto bad;
 		}
 	}
@@ -863,8 +969,8 @@ static int validate_vid_hdr(const struct ubi_device *ubi,
 
 bad:
 	ubi_err("bad VID header");
-	ubi_dbg_dump_vid_hdr(vid_hdr);
-	ubi_dbg_dump_stack();
+	ubi_dump_vid_hdr(vid_hdr);
+	dump_stack();
 	return 1;
 }
 
@@ -878,88 +984,53 @@ bad:
  *
  * This function reads the volume identifier header from physical eraseblock
  * @pnum and stores it in @vid_hdr. It also checks CRC checksum of the read
- * volume identifier header. The following codes may be returned:
+ * volume identifier header. The error codes are the same as in
+ * 'ubi_io_read_ec_hdr()'.
  *
- * o %0 if the CRC checksum is correct and the header was successfully read;
- * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
- *   and corrected by the flash driver; this is harmless but may indicate that
- *   this eraseblock may become bad soon;
- * o %UBI_IO_BAD_VID_HRD if the volume identifier header is corrupted (a CRC
- *   error detected);
- * o %UBI_IO_PEB_FREE if the physical eraseblock is free (i.e., there is no VID
- *   header there);
- * o a negative error code in case of failure.
+ * Note, the implementation of this function is also very similar to
+ * 'ubi_io_read_ec_hdr()', so refer commentaries in 'ubi_io_read_ec_hdr()'.
  */
 int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
 			struct ubi_vid_hdr *vid_hdr, int verbose)
 {
-	int err, read_err = 0;
+	int err, read_err;
 	uint32_t crc, magic, hdr_crc;
 	void *p;
 
 	dbg_io("read VID header from PEB %d", pnum);
 	ubi_assert(pnum >= 0 &&  pnum < ubi->peb_count);
-	if (UBI_IO_DEBUG)
-		verbose = 1;
 
 	p = (char *)vid_hdr - ubi->vid_hdr_shift;
-	err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
+	read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
 			  ubi->vid_hdr_alsize);
-	if (err) {
-		if (err != UBI_IO_BITFLIPS && err != -EBADMSG)
-			return err;
-
-		/*
-		 * We read all the data, but either a correctable bit-flip
-		 * occurred, or MTD reported about some data integrity error,
-		 * like an ECC error in case of NAND. The former is harmless,
-		 * the later may mean the read data is corrupted. But we have a
-		 * CRC check-sum and we will identify this. If the VID header is
-		 * still OK, we just report this as there was a bit-flip.
-		 */
-		read_err = err;
-	}
+	if (read_err && read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
+		return read_err;
 
 	magic = be32_to_cpu(vid_hdr->magic);
 	if (magic != UBI_VID_HDR_MAGIC) {
-		/*
-		 * If we have read all 0xFF bytes, the VID header probably does
-		 * not exist and the physical eraseblock is assumed to be free.
-		 *
-		 * But if there was a read error, we do not test the data for
-		 * 0xFFs. Even if it does contain all 0xFFs, this error
-		 * indicates that something is still wrong with this physical
-		 * eraseblock and it cannot be regarded as free.
-		 */
-		if (read_err != -EBADMSG &&
-		    check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
-			/* The physical eraseblock is supposedly free */
-
-			/*
-			 * The below is just a paranoid check, it has to be
-			 * compiled out if paranoid checks are disabled.
-			 */
-			err = paranoid_check_all_ff(ubi, pnum, ubi->leb_start,
-						    ubi->leb_size);
-			if (err)
-				return err > 0 ? UBI_IO_BAD_VID_HDR : err;
+		if (mtd_is_eccerr(read_err))
+			return UBI_IO_BAD_HDR_EBADMSG;
 
+		if (ubi_check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
 			if (verbose)
-				ubi_warn("no VID header found at PEB %d, "
-					 "only 0xFF bytes", pnum);
-			return UBI_IO_PEB_FREE;
+				ubi_warn("no VID header found at PEB %d, only 0xFF bytes",
+					 pnum);
+			dbg_bld("no VID header found at PEB %d, only 0xFF bytes",
+				pnum);
+			if (!read_err)
+				return UBI_IO_FF;
+			else
+				return UBI_IO_FF_BITFLIPS;
 		}
 
-		/*
-		 * This is not a valid VID header, and these are not 0xFF
-		 * bytes. Report that the header is corrupted.
-		 */
 		if (verbose) {
-			ubi_warn("bad magic number at PEB %d: %08x instead of "
-				 "%08x", pnum, magic, UBI_VID_HDR_MAGIC);
-			ubi_dbg_dump_vid_hdr(vid_hdr);
+			ubi_warn("bad magic number at PEB %d: %08x instead of %08x",
+				 pnum, magic, UBI_VID_HDR_MAGIC);
+			ubi_dump_vid_hdr(vid_hdr);
 		}
-		return UBI_IO_BAD_VID_HDR;
+		dbg_bld("bad magic number at PEB %d: %08x instead of %08x",
+			pnum, magic, UBI_VID_HDR_MAGIC);
+		return UBI_IO_BAD_HDR;
 	}
 
 	crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC);
@@ -967,14 +1038,18 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
 
 	if (hdr_crc != crc) {
 		if (verbose) {
-			ubi_warn("bad CRC at PEB %d, calculated %#08x, "
-				 "read %#08x", pnum, crc, hdr_crc);
-			ubi_dbg_dump_vid_hdr(vid_hdr);
+			ubi_warn("bad CRC at PEB %d, calculated %#08x, read %#08x",
+				 pnum, crc, hdr_crc);
+			ubi_dump_vid_hdr(vid_hdr);
 		}
-		return UBI_IO_BAD_VID_HDR;
+		dbg_bld("bad CRC at PEB %d, calculated %#08x, read %#08x",
+			pnum, crc, hdr_crc);
+		if (!read_err)
+			return UBI_IO_BAD_HDR;
+		else
+			return UBI_IO_BAD_HDR_EBADMSG;
 	}
 
-	/* Validate the VID header that we have just read */
 	err = validate_vid_hdr(ubi, vid_hdr);
 	if (err) {
 		ubi_err("validation failed for PEB %d", pnum);
@@ -1009,18 +1084,18 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum,
 	dbg_io("write VID header to PEB %d", pnum);
 	ubi_assert(pnum >= 0 &&  pnum < ubi->peb_count);
 
-	err = paranoid_check_peb_ec_hdr(ubi, pnum);
+	err = self_check_peb_ec_hdr(ubi, pnum);
 	if (err)
-		return err > 0 ? -EINVAL: err;
+		return err;
 
 	vid_hdr->magic = cpu_to_be32(UBI_VID_HDR_MAGIC);
 	vid_hdr->version = UBI_VERSION;
 	crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC);
 	vid_hdr->hdr_crc = cpu_to_be32(crc);
 
-	err = paranoid_check_vid_hdr(ubi, pnum, vid_hdr);
+	err = self_check_vid_hdr(ubi, pnum, vid_hdr);
 	if (err)
-		return -EINVAL;
+		return err;
 
 	p = (char *)vid_hdr - ubi->vid_hdr_shift;
 	err = ubi_io_write(ubi, p, pnum, ubi->vid_hdr_aloffset,
@@ -1028,44 +1103,48 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum,
 	return err;
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-
 /**
- * paranoid_check_not_bad - ensure that a physical eraseblock is not bad.
+ * self_check_not_bad - ensure that a physical eraseblock is not bad.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock number to check
  *
- * This function returns zero if the physical eraseblock is good, a positive
- * number if it is bad and a negative error code if an error occurred.
+ * This function returns zero if the physical eraseblock is good, %-EINVAL if
+ * it is bad and a negative error code if an error occurred.
  */
-static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum)
+static int self_check_not_bad(const struct ubi_device *ubi, int pnum)
 {
 	int err;
 
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
 	err = ubi_io_is_bad(ubi, pnum);
 	if (!err)
 		return err;
 
-	ubi_err("paranoid check failed for PEB %d", pnum);
-	ubi_dbg_dump_stack();
-	return err;
+	ubi_err("self-check failed for PEB %d", pnum);
+	dump_stack();
+	return err > 0 ? -EINVAL : err;
 }
 
 /**
- * paranoid_check_ec_hdr - check if an erase counter header is all right.
+ * self_check_ec_hdr - check if an erase counter header is all right.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock number the erase counter header belongs to
  * @ec_hdr: the erase counter header to check
  *
  * This function returns zero if the erase counter header contains valid
- * values, and %1 if not.
+ * values, and %-EINVAL if not.
  */
-static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
-				 const struct ubi_ec_hdr *ec_hdr)
+static int self_check_ec_hdr(const struct ubi_device *ubi, int pnum,
+			     const struct ubi_ec_hdr *ec_hdr)
 {
 	int err;
 	uint32_t magic;
 
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
 	magic = be32_to_cpu(ec_hdr->magic);
 	if (magic != UBI_EC_HDR_MAGIC) {
 		ubi_err("bad magic %#08x, must be %#08x",
@@ -1075,53 +1154,55 @@ static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
 
 	err = validate_ec_hdr(ubi, ec_hdr);
 	if (err) {
-		ubi_err("paranoid check failed for PEB %d", pnum);
+		ubi_err("self-check failed for PEB %d", pnum);
 		goto fail;
 	}
 
 	return 0;
 
 fail:
-	ubi_dbg_dump_ec_hdr(ec_hdr);
-	ubi_dbg_dump_stack();
-	return 1;
+	ubi_dump_ec_hdr(ec_hdr);
+	dump_stack();
+	return -EINVAL;
 }
 
 /**
- * paranoid_check_peb_ec_hdr - check that the erase counter header of a
- * physical eraseblock is in-place and is all right.
+ * self_check_peb_ec_hdr - check erase counter header.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  *
- * This function returns zero if the erase counter header is all right, %1 if
- * not, and a negative error code if an error occurred.
+ * This function returns zero if the erase counter header is all right and and
+ * a negative error code if not or if an error occurred.
  */
-static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum)
+static int self_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum)
 {
 	int err;
 	uint32_t crc, hdr_crc;
 	struct ubi_ec_hdr *ec_hdr;
 
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
 	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS);
 	if (!ec_hdr)
 		return -ENOMEM;
 
 	err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
-	if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+	if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
 		goto exit;
 
 	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
 	hdr_crc = be32_to_cpu(ec_hdr->hdr_crc);
 	if (hdr_crc != crc) {
 		ubi_err("bad CRC, calculated %#08x, read %#08x", crc, hdr_crc);
-		ubi_err("paranoid check failed for PEB %d", pnum);
-		ubi_dbg_dump_ec_hdr(ec_hdr);
-		ubi_dbg_dump_stack();
-		err = 1;
+		ubi_err("self-check failed for PEB %d", pnum);
+		ubi_dump_ec_hdr(ec_hdr);
+		dump_stack();
+		err = -EINVAL;
 		goto exit;
 	}
 
-	err = paranoid_check_ec_hdr(ubi, pnum, ec_hdr);
+	err = self_check_ec_hdr(ubi, pnum, ec_hdr);
 
 exit:
 	kfree(ec_hdr);
@@ -1129,20 +1210,23 @@ exit:
 }
 
 /**
- * paranoid_check_vid_hdr - check that a volume identifier header is all right.
+ * self_check_vid_hdr - check that a volume identifier header is all right.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock number the volume identifier header belongs to
  * @vid_hdr: the volume identifier header to check
  *
  * This function returns zero if the volume identifier header is all right, and
- * %1 if not.
+ * %-EINVAL if not.
  */
-static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
-				  const struct ubi_vid_hdr *vid_hdr)
+static int self_check_vid_hdr(const struct ubi_device *ubi, int pnum,
+			      const struct ubi_vid_hdr *vid_hdr)
 {
 	int err;
 	uint32_t magic;
 
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
 	magic = be32_to_cpu(vid_hdr->magic);
 	if (magic != UBI_VID_HDR_MAGIC) {
 		ubi_err("bad VID header magic %#08x at PEB %d, must be %#08x",
@@ -1152,36 +1236,38 @@ static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
 
 	err = validate_vid_hdr(ubi, vid_hdr);
 	if (err) {
-		ubi_err("paranoid check failed for PEB %d", pnum);
+		ubi_err("self-check failed for PEB %d", pnum);
 		goto fail;
 	}
 
 	return err;
 
 fail:
-	ubi_err("paranoid check failed for PEB %d", pnum);
-	ubi_dbg_dump_vid_hdr(vid_hdr);
-	ubi_dbg_dump_stack();
-	return 1;
+	ubi_err("self-check failed for PEB %d", pnum);
+	ubi_dump_vid_hdr(vid_hdr);
+	dump_stack();
+	return -EINVAL;
 
 }
 
 /**
- * paranoid_check_peb_vid_hdr - check that the volume identifier header of a
- * physical eraseblock is in-place and is all right.
+ * self_check_peb_vid_hdr - check volume identifier header.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  *
  * This function returns zero if the volume identifier header is all right,
- * %1 if not, and a negative error code if an error occurred.
+ * and a negative error code if not or if an error occurred.
  */
-static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum)
+static int self_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum)
 {
 	int err;
 	uint32_t crc, hdr_crc;
 	struct ubi_vid_hdr *vid_hdr;
 	void *p;
 
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
 	if (!vid_hdr)
 		return -ENOMEM;
@@ -1189,22 +1275,22 @@ static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum)
 	p = (char *)vid_hdr - ubi->vid_hdr_shift;
 	err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
 			  ubi->vid_hdr_alsize);
-	if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+	if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
 		goto exit;
 
 	crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_EC_HDR_SIZE_CRC);
 	hdr_crc = be32_to_cpu(vid_hdr->hdr_crc);
 	if (hdr_crc != crc) {
-		ubi_err("bad VID header CRC at PEB %d, calculated %#08x, "
-			"read %#08x", pnum, crc, hdr_crc);
-		ubi_err("paranoid check failed for PEB %d", pnum);
-		ubi_dbg_dump_vid_hdr(vid_hdr);
-		ubi_dbg_dump_stack();
-		err = 1;
+		ubi_err("bad VID header CRC at PEB %d, calculated %#08x, read %#08x",
+			pnum, crc, hdr_crc);
+		ubi_err("self-check failed for PEB %d", pnum);
+		ubi_dump_vid_hdr(vid_hdr);
+		dump_stack();
+		err = -EINVAL;
 		goto exit;
 	}
 
-	err = paranoid_check_vid_hdr(ubi, pnum, vid_hdr);
+	err = self_check_vid_hdr(ubi, pnum, vid_hdr);
 
 exit:
 	ubi_free_vid_hdr(ubi, vid_hdr);
@@ -1212,51 +1298,123 @@ exit:
 }
 
 /**
- * paranoid_check_all_ff - check that a region of flash is empty.
+ * self_check_write - make sure write succeeded.
+ * @ubi: UBI device description object
+ * @buf: buffer with data which were written
+ * @pnum: physical eraseblock number the data were written to
+ * @offset: offset within the physical eraseblock the data were written to
+ * @len: how many bytes were written
+ *
+ * This functions reads data which were recently written and compares it with
+ * the original data buffer - the data have to match. Returns zero if the data
+ * match and a negative error code if not or in case of failure.
+ */
+static int self_check_write(struct ubi_device *ubi, const void *buf, int pnum,
+			    int offset, int len)
+{
+	int err, i;
+	size_t read;
+	void *buf1;
+	loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
+
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
+	buf1 = __vmalloc(len, GFP_NOFS, PAGE_KERNEL);
+	if (!buf1) {
+		ubi_err("cannot allocate memory to check writes");
+		return 0;
+	}
+
+	err = mtd_read(ubi->mtd, addr, len, &read, buf1);
+	if (err && !mtd_is_bitflip(err))
+		goto out_free;
+
+	for (i = 0; i < len; i++) {
+		uint8_t c = ((uint8_t *)buf)[i];
+		uint8_t c1 = ((uint8_t *)buf1)[i];
+#if !defined(CONFIG_UBI_SILENCE_MSG)
+		int dump_len = max_t(int, 128, len - i);
+#endif
+
+		if (c == c1)
+			continue;
+
+		ubi_err("self-check failed for PEB %d:%d, len %d",
+			pnum, offset, len);
+		ubi_msg("data differ at position %d", i);
+		ubi_msg("hex dump of the original buffer from %d to %d",
+			i, i + dump_len);
+		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
+			       buf + i, dump_len, 1);
+		ubi_msg("hex dump of the read buffer from %d to %d",
+			i, i + dump_len);
+		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
+			       buf1 + i, dump_len, 1);
+		dump_stack();
+		err = -EINVAL;
+		goto out_free;
+	}
+
+	vfree(buf1);
+	return 0;
+
+out_free:
+	vfree(buf1);
+	return err;
+}
+
+/**
+ * ubi_self_check_all_ff - check that a region of flash is empty.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  * @offset: the starting offset within the physical eraseblock to check
  * @len: the length of the region to check
  *
  * This function returns zero if only 0xFF bytes are present at offset
- * @offset of the physical eraseblock @pnum, %1 if not, and a negative error
- * code if an error occurred.
+ * @offset of the physical eraseblock @pnum, and a negative error code if not
+ * or if an error occurred.
  */
-static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
-				 int len)
+int ubi_self_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
 {
 	size_t read;
 	int err;
+	void *buf;
 	loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
 
-	mutex_lock(&ubi->dbg_buf_mutex);
-	err = mtd_read(ubi->mtd, addr, len, &read, ubi->dbg_peb_buf);
-	if (err && err != -EUCLEAN) {
-		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
-			"read %zd bytes", err, len, pnum, offset, read);
+	if (!ubi_dbg_chk_io(ubi))
+		return 0;
+
+	buf = __vmalloc(len, GFP_NOFS, PAGE_KERNEL);
+	if (!buf) {
+		ubi_err("cannot allocate memory to check for 0xFFs");
+		return 0;
+	}
+
+	err = mtd_read(ubi->mtd, addr, len, &read, buf);
+	if (err && !mtd_is_bitflip(err)) {
+		ubi_err("error %d while reading %d bytes from PEB %d:%d, read %zd bytes",
+			err, len, pnum, offset, read);
 		goto error;
 	}
 
-	err = check_pattern(ubi->dbg_peb_buf, 0xFF, len);
+	err = ubi_check_pattern(buf, 0xFF, len);
 	if (err == 0) {
-		ubi_err("flash region at PEB %d:%d, length %d does not "
-			"contain all 0xFF bytes", pnum, offset, len);
+		ubi_err("flash region at PEB %d:%d, length %d does not contain all 0xFF bytes",
+			pnum, offset, len);
 		goto fail;
 	}
-	mutex_unlock(&ubi->dbg_buf_mutex);
 
+	vfree(buf);
 	return 0;
 
 fail:
-	ubi_err("paranoid check failed for PEB %d", pnum);
-	dbg_msg("hex dump of the %d-%d region", offset, offset + len);
-	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
-		       ubi->dbg_peb_buf, len, 1);
-	err = 1;
+	ubi_err("self-check failed for PEB %d", pnum);
+	ubi_msg("hex dump of the %d-%d region", offset, offset + len);
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
+	err = -EINVAL;
 error:
-	ubi_dbg_dump_stack();
-	mutex_unlock(&ubi->dbg_buf_mutex);
+	dump_stack();
+	vfree(buf);
 	return err;
 }
-
-#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index 63c56c9..0183c93 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -8,16 +8,43 @@
 
 /* This file mostly implements UBI kernel API functions */
 
-#ifdef UBI_LINUX
+#define __UBOOT__
+#ifndef __UBOOT__
 #include <linux/module.h>
-#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/namei.h>
+#include <linux/fs.h>
 #include <asm/div64.h>
+#else
+#include <ubi_uboot.h>
 #endif
+#include <linux/err.h>
 
-#include <ubi_uboot.h>
 #include "ubi.h"
 
 /**
+ * ubi_do_get_device_info - get information about UBI device.
+ * @ubi: UBI device description object
+ * @di: the information is stored here
+ *
+ * This function is the same as 'ubi_get_device_info()', but it assumes the UBI
+ * device is locked and cannot disappear.
+ */
+void ubi_do_get_device_info(struct ubi_device *ubi, struct ubi_device_info *di)
+{
+	di->ubi_num = ubi->ubi_num;
+	di->leb_size = ubi->leb_size;
+	di->leb_start = ubi->leb_start;
+	di->min_io_size = ubi->min_io_size;
+	di->max_write_size = ubi->max_write_size;
+	di->ro_mode = ubi->ro_mode;
+#ifndef __UBOOT__
+	di->cdev = ubi->cdev.dev;
+#endif
+}
+EXPORT_SYMBOL_GPL(ubi_do_get_device_info);
+
+/**
  * ubi_get_device_info - get information about UBI device.
  * @ubi_num: UBI device number
  * @di: the information is stored here
@@ -31,33 +58,24 @@ int ubi_get_device_info(int ubi_num, struct ubi_device_info *di)
 
 	if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES)
 		return -EINVAL;
-
 	ubi = ubi_get_device(ubi_num);
 	if (!ubi)
 		return -ENODEV;
-
-	di->ubi_num = ubi->ubi_num;
-	di->leb_size = ubi->leb_size;
-	di->min_io_size = ubi->min_io_size;
-	di->ro_mode = ubi->ro_mode;
-	di->cdev = ubi->cdev.dev;
-
+	ubi_do_get_device_info(ubi, di);
 	ubi_put_device(ubi);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(ubi_get_device_info);
 
 /**
- * ubi_get_volume_info - get information about UBI volume.
- * @desc: volume descriptor
+ * ubi_do_get_volume_info - get information about UBI volume.
+ * @ubi: UBI device description object
+ * @vol: volume description object
  * @vi: the information is stored here
  */
-void ubi_get_volume_info(struct ubi_volume_desc *desc,
-			 struct ubi_volume_info *vi)
+void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol,
+			    struct ubi_volume_info *vi)
 {
-	const struct ubi_volume *vol = desc->vol;
-	const struct ubi_device *ubi = vol->ubi;
-
 	vi->vol_id = vol->vol_id;
 	vi->ubi_num = ubi->ubi_num;
 	vi->size = vol->reserved_pebs;
@@ -71,6 +89,17 @@ void ubi_get_volume_info(struct ubi_volume_desc *desc,
 	vi->name = vol->name;
 	vi->cdev = vol->cdev.dev;
 }
+
+/**
+ * ubi_get_volume_info - get information about UBI volume.
+ * @desc: volume descriptor
+ * @vi: the information is stored here
+ */
+void ubi_get_volume_info(struct ubi_volume_desc *desc,
+			 struct ubi_volume_info *vi)
+{
+	ubi_do_get_volume_info(desc->vol->ubi, desc->vol, vi);
+}
 EXPORT_SYMBOL_GPL(ubi_get_volume_info);
 
 /**
@@ -98,7 +127,7 @@ struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode)
 	struct ubi_device *ubi;
 	struct ubi_volume *vol;
 
-	dbg_msg("open device %d volume %d, mode %d", ubi_num, vol_id, mode);
+	dbg_gen("open device %d, volume %d, mode %d", ubi_num, vol_id, mode);
 
 	if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES)
 		return ERR_PTR(-EINVAL);
@@ -188,6 +217,8 @@ out_free:
 	kfree(desc);
 out_put_ubi:
 	ubi_put_device(ubi);
+	ubi_err("cannot open device %d, volume %d, error %d",
+		ubi_num, vol_id, err);
 	return ERR_PTR(err);
 }
 EXPORT_SYMBOL_GPL(ubi_open_volume);
@@ -207,7 +238,7 @@ struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
 	struct ubi_device *ubi;
 	struct ubi_volume_desc *ret;
 
-	dbg_msg("open volume %s, mode %d", name, mode);
+	dbg_gen("open device %d, volume %s, mode %d", ubi_num, name, mode);
 
 	if (!name)
 		return ERR_PTR(-EINVAL);
@@ -249,6 +280,45 @@ struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
 }
 EXPORT_SYMBOL_GPL(ubi_open_volume_nm);
 
+#ifndef __UBOOT__
+/**
+ * ubi_open_volume_path - open UBI volume by its character device node path.
+ * @pathname: volume character device node path
+ * @mode: open mode
+ *
+ * This function is similar to 'ubi_open_volume()', but opens a volume the path
+ * to its character device node.
+ */
+struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode)
+{
+	int error, ubi_num, vol_id, mod;
+	struct inode *inode;
+	struct path path;
+
+	dbg_gen("open volume %s, mode %d", pathname, mode);
+
+	if (!pathname || !*pathname)
+		return ERR_PTR(-EINVAL);
+
+	error = kern_path(pathname, LOOKUP_FOLLOW, &path);
+	if (error)
+		return ERR_PTR(error);
+
+	inode = path.dentry->d_inode;
+	mod = inode->i_mode;
+	ubi_num = ubi_major2num(imajor(inode));
+	vol_id = iminor(inode) - 1;
+	path_put(&path);
+
+	if (!S_ISCHR(mod))
+		return ERR_PTR(-EINVAL);
+	if (vol_id >= 0 && ubi_num >= 0)
+		return ubi_open_volume(ubi_num, vol_id, mode);
+	return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL_GPL(ubi_open_volume_path);
+#endif
+
 /**
  * ubi_close_volume - close UBI volume.
  * @desc: volume descriptor
@@ -258,7 +328,8 @@ void ubi_close_volume(struct ubi_volume_desc *desc)
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
 
-	dbg_msg("close volume %d, mode %d", vol->vol_id, desc->mode);
+	dbg_gen("close device %d, volume %d, mode %d",
+		ubi->ubi_num, vol->vol_id, desc->mode);
 
 	spin_lock(&ubi->volumes_lock);
 	switch (desc->mode) {
@@ -315,7 +386,7 @@ int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
 	struct ubi_device *ubi = vol->ubi;
 	int err, vol_id = vol->vol_id;
 
-	dbg_msg("read %d bytes from LEB %d:%d:%d", len, vol_id, lnum, offset);
+	dbg_gen("read %d bytes from LEB %d:%d:%d", len, vol_id, lnum, offset);
 
 	if (vol_id < 0 || vol_id >= ubi->vtbl_slots || lnum < 0 ||
 	    lnum >= vol->used_ebs || offset < 0 || len < 0 ||
@@ -353,11 +424,9 @@ EXPORT_SYMBOL_GPL(ubi_leb_read);
  * @buf: data to write
  * @offset: offset within the logical eraseblock where to write
  * @len: how many bytes to write
- * @dtype: expected data type
  *
  * This function writes @len bytes of data from @buf to offset @offset of
- * logical eraseblock @lnum. The @dtype argument describes expected lifetime of
- * the data.
+ * logical eraseblock @lnum.
  *
  * This function takes care of physical eraseblock write failures. If write to
  * the physical eraseblock write operation fails, the logical eraseblock is
@@ -374,13 +443,13 @@ EXPORT_SYMBOL_GPL(ubi_leb_read);
  * returns immediately with %-EBADF code.
  */
 int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
-		  int offset, int len, int dtype)
+		  int offset, int len)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
 	int vol_id = vol->vol_id;
 
-	dbg_msg("write %d bytes to LEB %d:%d:%d", len, vol_id, lnum, offset);
+	dbg_gen("write %d bytes to LEB %d:%d:%d", len, vol_id, lnum, offset);
 
 	if (vol_id < 0 || vol_id >= ubi->vtbl_slots)
 		return -EINVAL;
@@ -393,17 +462,13 @@ int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
 	    offset & (ubi->min_io_size - 1) || len & (ubi->min_io_size - 1))
 		return -EINVAL;
 
-	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
-	    dtype != UBI_UNKNOWN)
-		return -EINVAL;
-
 	if (vol->upd_marker)
 		return -EBADF;
 
 	if (len == 0)
 		return 0;
 
-	return ubi_eba_write_leb(ubi, vol, lnum, buf, offset, len, dtype);
+	return ubi_eba_write_leb(ubi, vol, lnum, buf, offset, len);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_write);
 
@@ -413,24 +478,23 @@ EXPORT_SYMBOL_GPL(ubi_leb_write);
  * @lnum: logical eraseblock number to change
  * @buf: data to write
  * @len: how many bytes to write
- * @dtype: expected data type
  *
  * This function changes the contents of a logical eraseblock atomically. @buf
  * has to contain new logical eraseblock data, and @len - the length of the
- * data, which has to be aligned. The length may be shorter then the logical
+ * data, which has to be aligned. The length may be shorter than the logical
  * eraseblock size, ant the logical eraseblock may be appended to more times
  * later on. This function guarantees that in case of an unclean reboot the old
  * contents is preserved. Returns zero in case of success and a negative error
  * code in case of failure.
  */
 int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
-		   int len, int dtype)
+		   int len)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
 	int vol_id = vol->vol_id;
 
-	dbg_msg("atomically write %d bytes to LEB %d:%d", len, vol_id, lnum);
+	dbg_gen("atomically write %d bytes to LEB %d:%d", len, vol_id, lnum);
 
 	if (vol_id < 0 || vol_id >= ubi->vtbl_slots)
 		return -EINVAL;
@@ -442,17 +506,13 @@ int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
 	    len > vol->usable_leb_size || len & (ubi->min_io_size - 1))
 		return -EINVAL;
 
-	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
-	    dtype != UBI_UNKNOWN)
-		return -EINVAL;
-
 	if (vol->upd_marker)
 		return -EBADF;
 
 	if (len == 0)
 		return 0;
 
-	return ubi_eba_atomic_leb_change(ubi, vol, lnum, buf, len, dtype);
+	return ubi_eba_atomic_leb_change(ubi, vol, lnum, buf, len);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_change);
 
@@ -474,7 +534,7 @@ int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum)
 	struct ubi_device *ubi = vol->ubi;
 	int err;
 
-	dbg_msg("erase LEB %d:%d", vol->vol_id, lnum);
+	dbg_gen("erase LEB %d:%d", vol->vol_id, lnum);
 
 	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
 		return -EROFS;
@@ -489,7 +549,7 @@ int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum)
 	if (err)
 		return err;
 
-	return ubi_wl_flush(ubi);
+	return ubi_wl_flush(ubi, vol->vol_id, lnum);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_erase);
 
@@ -500,7 +560,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_erase);
  *
  * This function un-maps logical eraseblock @lnum and schedules the
  * corresponding physical eraseblock for erasure, so that it will eventually be
- * physically erased in background. This operation is much faster then the
+ * physically erased in background. This operation is much faster than the
  * erase operation.
  *
  * Unlike erase, the un-map operation does not guarantee that the logical
@@ -519,7 +579,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_erase);
  *
  * The main and obvious use-case of this function is when the contents of a
  * logical eraseblock has to be re-written. Then it is much more efficient to
- * first un-map it, then write new data, rather then first erase it, then write
+ * first un-map it, then write new data, rather than first erase it, then write
  * new data. Note, once new data has been written to the logical eraseblock,
  * UBI guarantees that the old contents has gone forever. In other words, if an
  * unclean reboot happens after the logical eraseblock has been un-mapped and
@@ -534,7 +594,7 @@ int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum)
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
 
-	dbg_msg("unmap LEB %d:%d", vol->vol_id, lnum);
+	dbg_gen("unmap LEB %d:%d", vol->vol_id, lnum);
 
 	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
 		return -EROFS;
@@ -550,13 +610,12 @@ int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum)
 EXPORT_SYMBOL_GPL(ubi_leb_unmap);
 
 /**
- * ubi_leb_map - map logical erasblock to a physical eraseblock.
+ * ubi_leb_map - map logical eraseblock to a physical eraseblock.
  * @desc: volume descriptor
  * @lnum: logical eraseblock number
- * @dtype: expected data type
  *
  * This function maps an un-mapped logical eraseblock @lnum to a physical
- * eraseblock. This means, that after a successfull invocation of this
+ * eraseblock. This means, that after a successful invocation of this
  * function the logical eraseblock @lnum will be empty (contain only %0xFF
  * bytes) and be mapped to a physical eraseblock, even if an unclean reboot
  * happens.
@@ -566,12 +625,12 @@ EXPORT_SYMBOL_GPL(ubi_leb_unmap);
  * eraseblock is already mapped, and other negative error codes in case of
  * other failures.
  */
-int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype)
+int ubi_leb_map(struct ubi_volume_desc *desc, int lnum)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
 
-	dbg_msg("unmap LEB %d:%d", vol->vol_id, lnum);
+	dbg_gen("unmap LEB %d:%d", vol->vol_id, lnum);
 
 	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
 		return -EROFS;
@@ -579,17 +638,13 @@ int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype)
 	if (lnum < 0 || lnum >= vol->reserved_pebs)
 		return -EINVAL;
 
-	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
-	    dtype != UBI_UNKNOWN)
-		return -EINVAL;
-
 	if (vol->upd_marker)
 		return -EBADF;
 
 	if (vol->eba_tbl[lnum] >= 0)
 		return -EBADMSG;
 
-	return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0, dtype);
+	return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_map);
 
@@ -613,7 +668,7 @@ int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum)
 {
 	struct ubi_volume *vol = desc->vol;
 
-	dbg_msg("test LEB %d:%d", vol->vol_id, lnum);
+	dbg_gen("test LEB %d:%d", vol->vol_id, lnum);
 
 	if (lnum < 0 || lnum >= vol->reserved_pebs)
 		return -EINVAL;
@@ -624,3 +679,110 @@ int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum)
 	return vol->eba_tbl[lnum] >= 0;
 }
 EXPORT_SYMBOL_GPL(ubi_is_mapped);
+
+/**
+ * ubi_sync - synchronize UBI device buffers.
+ * @ubi_num: UBI device to synchronize
+ *
+ * The underlying MTD device may cache data in hardware or in software. This
+ * function ensures the caches are flushed. Returns zero in case of success and
+ * a negative error code in case of failure.
+ */
+int ubi_sync(int ubi_num)
+{
+	struct ubi_device *ubi;
+
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return -ENODEV;
+
+	mtd_sync(ubi->mtd);
+	ubi_put_device(ubi);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ubi_sync);
+
+/**
+ * ubi_flush - flush UBI work queue.
+ * @ubi_num: UBI device to flush work queue
+ * @vol_id: volume id to flush for
+ * @lnum: logical eraseblock number to flush for
+ *
+ * This function executes all pending works for a particular volume id / logical
+ * eraseblock number pair. If either value is set to %UBI_ALL, then it acts as
+ * a wildcard for all of the corresponding volume numbers or logical
+ * eraseblock numbers. It returns zero in case of success and a negative error
+ * code in case of failure.
+ */
+int ubi_flush(int ubi_num, int vol_id, int lnum)
+{
+	struct ubi_device *ubi;
+	int err = 0;
+
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return -ENODEV;
+
+	err = ubi_wl_flush(ubi, vol_id, lnum);
+	ubi_put_device(ubi);
+	return err;
+}
+EXPORT_SYMBOL_GPL(ubi_flush);
+
+#ifndef __UBOOT__
+BLOCKING_NOTIFIER_HEAD(ubi_notifiers);
+
+/**
+ * ubi_register_volume_notifier - register a volume notifier.
+ * @nb: the notifier description object
+ * @ignore_existing: if non-zero, do not send "added" notification for all
+ *                   already existing volumes
+ *
+ * This function registers a volume notifier, which means that
+ * 'nb->notifier_call()' will be invoked when an UBI  volume is created,
+ * removed, re-sized, re-named, or updated. The first argument of the function
+ * is the notification type. The second argument is pointer to a
+ * &struct ubi_notification object which describes the notification event.
+ * Using UBI API from the volume notifier is prohibited.
+ *
+ * This function returns zero in case of success and a negative error code
+ * in case of failure.
+ */
+int ubi_register_volume_notifier(struct notifier_block *nb,
+				 int ignore_existing)
+{
+	int err;
+
+	err = blocking_notifier_chain_register(&ubi_notifiers, nb);
+	if (err != 0)
+		return err;
+	if (ignore_existing)
+		return 0;
+
+	/*
+	 * We are going to walk all UBI devices and all volumes, and
+	 * notify the user about existing volumes by the %UBI_VOLUME_ADDED
+	 * event. We have to lock the @ubi_devices_mutex to make sure UBI
+	 * devices do not disappear.
+	 */
+	mutex_lock(&ubi_devices_mutex);
+	ubi_enumerate_volumes(nb);
+	mutex_unlock(&ubi_devices_mutex);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(ubi_register_volume_notifier);
+
+/**
+ * ubi_unregister_volume_notifier - unregister the volume notifier.
+ * @nb: the notifier description object
+ *
+ * This function unregisters volume notifier @nm and returns zero in case of
+ * success and a negative error code in case of failure.
+ */
+int ubi_unregister_volume_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&ubi_notifiers, nb);
+}
+EXPORT_SYMBOL_GPL(ubi_unregister_volume_notifier);
+#endif
diff --git a/drivers/mtd/ubi/misc.c b/drivers/mtd/ubi/misc.c
index 5ff55b4..49530b7 100644
--- a/drivers/mtd/ubi/misc.c
+++ b/drivers/mtd/ubi/misc.c
@@ -81,14 +81,62 @@ int ubi_check_volume(struct ubi_device *ubi, int vol_id)
 }
 
 /**
- * ubi_calculate_rsvd_pool - calculate how many PEBs must be reserved for bad
+ * ubi_update_reserved - update bad eraseblock handling accounting data.
+ * @ubi: UBI device description object
+ *
+ * This function calculates the gap between current number of PEBs reserved for
+ * bad eraseblock handling and the required level of PEBs that must be
+ * reserved, and if necessary, reserves more PEBs to fill that gap, according
+ * to availability. Should be called with ubi->volumes_lock held.
+ */
+void ubi_update_reserved(struct ubi_device *ubi)
+{
+	int need = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
+
+	if (need <= 0 || ubi->avail_pebs == 0)
+		return;
+
+	need = min_t(int, need, ubi->avail_pebs);
+	ubi->avail_pebs -= need;
+	ubi->rsvd_pebs += need;
+	ubi->beb_rsvd_pebs += need;
+	ubi_msg("reserved more %d PEBs for bad PEB handling", need);
+}
+
+/**
+ * ubi_calculate_reserved - calculate how many PEBs must be reserved for bad
  * eraseblock handling.
  * @ubi: UBI device description object
  */
 void ubi_calculate_reserved(struct ubi_device *ubi)
 {
-	ubi->beb_rsvd_level = ubi->good_peb_count/100;
-	ubi->beb_rsvd_level *= CONFIG_MTD_UBI_BEB_RESERVE;
-	if (ubi->beb_rsvd_level < MIN_RESEVED_PEBS)
-		ubi->beb_rsvd_level = MIN_RESEVED_PEBS;
+	/*
+	 * Calculate the actual number of PEBs currently needed to be reserved
+	 * for future bad eraseblock handling.
+	 */
+	ubi->beb_rsvd_level = ubi->bad_peb_limit - ubi->bad_peb_count;
+	if (ubi->beb_rsvd_level < 0) {
+		ubi->beb_rsvd_level = 0;
+		ubi_warn("number of bad PEBs (%d) is above the expected limit (%d), not reserving any PEBs for bad PEB handling, will use available PEBs (if any)",
+			 ubi->bad_peb_count, ubi->bad_peb_limit);
+	}
+}
+
+/**
+ * ubi_check_pattern - check if buffer contains only a certain byte pattern.
+ * @buf: buffer to check
+ * @patt: the pattern to check
+ * @size: buffer size in bytes
+ *
+ * This function returns %1 in there are only @patt bytes in @buf, and %0 if
+ * something else was also found.
+ */
+int ubi_check_pattern(const void *buf, uint8_t patt, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		if (((const uint8_t *)buf)[i] != patt)
+			return 0;
+	return 1;
 }
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
deleted file mode 100644
index a6d0fbc..0000000
--- a/drivers/mtd/ubi/scan.c
+++ /dev/null
@@ -1,1348 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Author: Artem Bityutskiy (Битюцкий Артём)
- */
-
-/*
- * UBI scanning unit.
- *
- * This unit is responsible for scanning the flash media, checking UBI
- * headers and providing complete information about the UBI flash image.
- *
- * The scanning information is represented by a &struct ubi_scan_info' object.
- * Information about found volumes is represented by &struct ubi_scan_volume
- * objects which are kept in volume RB-tree with root at the @volumes field.
- * The RB-tree is indexed by the volume ID.
- *
- * Found logical eraseblocks are represented by &struct ubi_scan_leb objects.
- * These objects are kept in per-volume RB-trees with the root at the
- * corresponding &struct ubi_scan_volume object. To put it differently, we keep
- * an RB-tree of per-volume objects and each of these objects is the root of
- * RB-tree of per-eraseblock objects.
- *
- * Corrupted physical eraseblocks are put to the @corr list, free physical
- * eraseblocks are put to the @free list and the physical eraseblock to be
- * erased are put to the @erase list.
- */
-
-#ifdef UBI_LINUX
-#include <linux/err.h>
-#include <linux/crc32.h>
-#include <asm/div64.h>
-#endif
-
-#include <ubi_uboot.h>
-#include "ubi.h"
-
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si);
-#else
-#define paranoid_check_si(ubi, si) 0
-#endif
-
-/* Temporary variables used during scanning */
-static struct ubi_ec_hdr *ech;
-static struct ubi_vid_hdr *vidh;
-
-/**
- * add_to_list - add physical eraseblock to a list.
- * @si: scanning information
- * @pnum: physical eraseblock number to add
- * @ec: erase counter of the physical eraseblock
- * @list: the list to add to
- *
- * This function adds physical eraseblock @pnum to free, erase, corrupted or
- * alien lists. Returns zero in case of success and a negative error code in
- * case of failure.
- */
-static int add_to_list(struct ubi_scan_info *si, int pnum, int ec,
-		       struct list_head *list)
-{
-	struct ubi_scan_leb *seb;
-
-	if (list == &si->free)
-		dbg_bld("add to free: PEB %d, EC %d", pnum, ec);
-	else if (list == &si->erase)
-		dbg_bld("add to erase: PEB %d, EC %d", pnum, ec);
-	else if (list == &si->corr)
-		dbg_bld("add to corrupted: PEB %d, EC %d", pnum, ec);
-	else if (list == &si->alien)
-		dbg_bld("add to alien: PEB %d, EC %d", pnum, ec);
-	else
-		BUG();
-
-	seb = kmalloc(sizeof(struct ubi_scan_leb), GFP_KERNEL);
-	if (!seb)
-		return -ENOMEM;
-
-	seb->pnum = pnum;
-	seb->ec = ec;
-	list_add_tail(&seb->u.list, list);
-	return 0;
-}
-
-/**
- * validate_vid_hdr - check that volume identifier header is correct and
- * consistent.
- * @vid_hdr: the volume identifier header to check
- * @sv: information about the volume this logical eraseblock belongs to
- * @pnum: physical eraseblock number the VID header came from
- *
- * This function checks that data stored in @vid_hdr is consistent. Returns
- * non-zero if an inconsistency was found and zero if not.
- *
- * Note, UBI does sanity check of everything it reads from the flash media.
- * Most of the checks are done in the I/O unit. Here we check that the
- * information in the VID header is consistent to the information in other VID
- * headers of the same volume.
- */
-static int validate_vid_hdr(const struct ubi_vid_hdr *vid_hdr,
-			    const struct ubi_scan_volume *sv, int pnum)
-{
-	int vol_type = vid_hdr->vol_type;
-	int vol_id = be32_to_cpu(vid_hdr->vol_id);
-	int used_ebs = be32_to_cpu(vid_hdr->used_ebs);
-	int data_pad = be32_to_cpu(vid_hdr->data_pad);
-
-	if (sv->leb_count != 0) {
-		int sv_vol_type;
-
-		/*
-		 * This is not the first logical eraseblock belonging to this
-		 * volume. Ensure that the data in its VID header is consistent
-		 * to the data in previous logical eraseblock headers.
-		 */
-
-		if (vol_id != sv->vol_id) {
-			dbg_err("inconsistent vol_id");
-			goto bad;
-		}
-
-		if (sv->vol_type == UBI_STATIC_VOLUME)
-			sv_vol_type = UBI_VID_STATIC;
-		else
-			sv_vol_type = UBI_VID_DYNAMIC;
-
-		if (vol_type != sv_vol_type) {
-			dbg_err("inconsistent vol_type");
-			goto bad;
-		}
-
-		if (used_ebs != sv->used_ebs) {
-			dbg_err("inconsistent used_ebs");
-			goto bad;
-		}
-
-		if (data_pad != sv->data_pad) {
-			dbg_err("inconsistent data_pad");
-			goto bad;
-		}
-	}
-
-	return 0;
-
-bad:
-	ubi_err("inconsistent VID header at PEB %d", pnum);
-	ubi_dbg_dump_vid_hdr(vid_hdr);
-	ubi_dbg_dump_sv(sv);
-	return -EINVAL;
-}
-
-/**
- * add_volume - add volume to the scanning information.
- * @si: scanning information
- * @vol_id: ID of the volume to add
- * @pnum: physical eraseblock number
- * @vid_hdr: volume identifier header
- *
- * If the volume corresponding to the @vid_hdr logical eraseblock is already
- * present in the scanning information, this function does nothing. Otherwise
- * it adds corresponding volume to the scanning information. Returns a pointer
- * to the scanning volume object in case of success and a negative error code
- * in case of failure.
- */
-static struct ubi_scan_volume *add_volume(struct ubi_scan_info *si, int vol_id,
-					  int pnum,
-					  const struct ubi_vid_hdr *vid_hdr)
-{
-	struct ubi_scan_volume *sv;
-	struct rb_node **p = &si->volumes.rb_node, *parent = NULL;
-
-	ubi_assert(vol_id == be32_to_cpu(vid_hdr->vol_id));
-
-	/* Walk the volume RB-tree to look if this volume is already present */
-	while (*p) {
-		parent = *p;
-		sv = rb_entry(parent, struct ubi_scan_volume, rb);
-
-		if (vol_id == sv->vol_id)
-			return sv;
-
-		if (vol_id > sv->vol_id)
-			p = &(*p)->rb_left;
-		else
-			p = &(*p)->rb_right;
-	}
-
-	/* The volume is absent - add it */
-	sv = kmalloc(sizeof(struct ubi_scan_volume), GFP_KERNEL);
-	if (!sv)
-		return ERR_PTR(-ENOMEM);
-
-	sv->highest_lnum = sv->leb_count = 0;
-	sv->vol_id = vol_id;
-	sv->root = RB_ROOT;
-	sv->used_ebs = be32_to_cpu(vid_hdr->used_ebs);
-	sv->data_pad = be32_to_cpu(vid_hdr->data_pad);
-	sv->compat = vid_hdr->compat;
-	sv->vol_type = vid_hdr->vol_type == UBI_VID_DYNAMIC ? UBI_DYNAMIC_VOLUME
-							    : UBI_STATIC_VOLUME;
-	if (vol_id > si->highest_vol_id)
-		si->highest_vol_id = vol_id;
-
-	rb_link_node(&sv->rb, parent, p);
-	rb_insert_color(&sv->rb, &si->volumes);
-	si->vols_found += 1;
-	dbg_bld("added volume %d", vol_id);
-	return sv;
-}
-
-/**
- * compare_lebs - find out which logical eraseblock is newer.
- * @ubi: UBI device description object
- * @seb: first logical eraseblock to compare
- * @pnum: physical eraseblock number of the second logical eraseblock to
- * compare
- * @vid_hdr: volume identifier header of the second logical eraseblock
- *
- * This function compares 2 copies of a LEB and informs which one is newer. In
- * case of success this function returns a positive value, in case of failure, a
- * negative error code is returned. The success return codes use the following
- * bits:
- *     o bit 0 is cleared: the first PEB (described by @seb) is newer then the
- *       second PEB (described by @pnum and @vid_hdr);
- *     o bit 0 is set: the second PEB is newer;
- *     o bit 1 is cleared: no bit-flips were detected in the newer LEB;
- *     o bit 1 is set: bit-flips were detected in the newer LEB;
- *     o bit 2 is cleared: the older LEB is not corrupted;
- *     o bit 2 is set: the older LEB is corrupted.
- */
-static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
-			int pnum, const struct ubi_vid_hdr *vid_hdr)
-{
-	void *buf;
-	int len, err, second_is_newer, bitflips = 0, corrupted = 0;
-	uint32_t data_crc, crc;
-	struct ubi_vid_hdr *vh = NULL;
-	unsigned long long sqnum2 = be64_to_cpu(vid_hdr->sqnum);
-
-	if (seb->sqnum == 0 && sqnum2 == 0) {
-		long long abs, v1 = seb->leb_ver, v2 = be32_to_cpu(vid_hdr->leb_ver);
-
-		/*
-		 * UBI constantly increases the logical eraseblock version
-		 * number and it can overflow. Thus, we have to bear in mind
-		 * that versions that are close to %0xFFFFFFFF are less then
-		 * versions that are close to %0.
-		 *
-		 * The UBI WL unit guarantees that the number of pending tasks
-		 * is not greater then %0x7FFFFFFF. So, if the difference
-		 * between any two versions is greater or equivalent to
-		 * %0x7FFFFFFF, there was an overflow and the logical
-		 * eraseblock with lower version is actually newer then the one
-		 * with higher version.
-		 *
-		 * FIXME: but this is anyway obsolete and will be removed at
-		 * some point.
-		 */
-		dbg_bld("using old crappy leb_ver stuff");
-
-		if (v1 == v2) {
-			ubi_err("PEB %d and PEB %d have the same version %lld",
-				seb->pnum, pnum, v1);
-			return -EINVAL;
-		}
-
-		abs = v1 - v2;
-		if (abs < 0)
-			abs = -abs;
-
-		if (abs < 0x7FFFFFFF)
-			/* Non-overflow situation */
-			second_is_newer = (v2 > v1);
-		else
-			second_is_newer = (v2 < v1);
-	} else
-		/* Obviously the LEB with lower sequence counter is older */
-		second_is_newer = sqnum2 > seb->sqnum;
-
-	/*
-	 * Now we know which copy is newer. If the copy flag of the PEB with
-	 * newer version is not set, then we just return, otherwise we have to
-	 * check data CRC. For the second PEB we already have the VID header,
-	 * for the first one - we'll need to re-read it from flash.
-	 *
-	 * FIXME: this may be optimized so that we wouldn't read twice.
-	 */
-
-	if (second_is_newer) {
-		if (!vid_hdr->copy_flag) {
-			/* It is not a copy, so it is newer */
-			dbg_bld("second PEB %d is newer, copy_flag is unset",
-				pnum);
-			return 1;
-		}
-	} else {
-		pnum = seb->pnum;
-
-		vh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
-		if (!vh)
-			return -ENOMEM;
-
-		err = ubi_io_read_vid_hdr(ubi, pnum, vh, 0);
-		if (err) {
-			if (err == UBI_IO_BITFLIPS)
-				bitflips = 1;
-			else {
-				dbg_err("VID of PEB %d header is bad, but it "
-					"was OK earlier", pnum);
-				if (err > 0)
-					err = -EIO;
-
-				goto out_free_vidh;
-			}
-		}
-
-		if (!vh->copy_flag) {
-			/* It is not a copy, so it is newer */
-			dbg_bld("first PEB %d is newer, copy_flag is unset",
-				pnum);
-			err = bitflips << 1;
-			goto out_free_vidh;
-		}
-
-		vid_hdr = vh;
-	}
-
-	/* Read the data of the copy and check the CRC */
-
-	len = be32_to_cpu(vid_hdr->data_size);
-	buf = vmalloc(len);
-	if (!buf) {
-		err = -ENOMEM;
-		goto out_free_vidh;
-	}
-
-	err = ubi_io_read_data(ubi, buf, pnum, 0, len);
-	if (err && err != UBI_IO_BITFLIPS)
-		goto out_free_buf;
-
-	data_crc = be32_to_cpu(vid_hdr->data_crc);
-	crc = crc32(UBI_CRC32_INIT, buf, len);
-	if (crc != data_crc) {
-		dbg_bld("PEB %d CRC error: calculated %#08x, must be %#08x",
-			pnum, crc, data_crc);
-		corrupted = 1;
-		bitflips = 0;
-		second_is_newer = !second_is_newer;
-	} else {
-		dbg_bld("PEB %d CRC is OK", pnum);
-		bitflips = !!err;
-	}
-
-	vfree(buf);
-	ubi_free_vid_hdr(ubi, vh);
-
-	if (second_is_newer)
-		dbg_bld("second PEB %d is newer, copy_flag is set", pnum);
-	else
-		dbg_bld("first PEB %d is newer, copy_flag is set", pnum);
-
-	return second_is_newer | (bitflips << 1) | (corrupted << 2);
-
-out_free_buf:
-	vfree(buf);
-out_free_vidh:
-	ubi_free_vid_hdr(ubi, vh);
-	return err;
-}
-
-/**
- * ubi_scan_add_used - add information about a physical eraseblock to the
- * scanning information.
- * @ubi: UBI device description object
- * @si: scanning information
- * @pnum: the physical eraseblock number
- * @ec: erase counter
- * @vid_hdr: the volume identifier header
- * @bitflips: if bit-flips were detected when this physical eraseblock was read
- *
- * This function adds information about a used physical eraseblock to the
- * 'used' tree of the corresponding volume. The function is rather complex
- * because it has to handle cases when this is not the first physical
- * eraseblock belonging to the same logical eraseblock, and the newer one has
- * to be picked, while the older one has to be dropped. This function returns
- * zero in case of success and a negative error code in case of failure.
- */
-int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
-		      int pnum, int ec, const struct ubi_vid_hdr *vid_hdr,
-		      int bitflips)
-{
-	int err, vol_id, lnum;
-	uint32_t leb_ver;
-	unsigned long long sqnum;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *seb;
-	struct rb_node **p, *parent = NULL;
-
-	vol_id = be32_to_cpu(vid_hdr->vol_id);
-	lnum = be32_to_cpu(vid_hdr->lnum);
-	sqnum = be64_to_cpu(vid_hdr->sqnum);
-	leb_ver = be32_to_cpu(vid_hdr->leb_ver);
-
-	dbg_bld("PEB %d, LEB %d:%d, EC %d, sqnum %llu, ver %u, bitflips %d",
-		pnum, vol_id, lnum, ec, sqnum, leb_ver, bitflips);
-
-	sv = add_volume(si, vol_id, pnum, vid_hdr);
-	if (IS_ERR(sv) < 0)
-		return PTR_ERR(sv);
-
-	if (si->max_sqnum < sqnum)
-		si->max_sqnum = sqnum;
-
-	/*
-	 * Walk the RB-tree of logical eraseblocks of volume @vol_id to look
-	 * if this is the first instance of this logical eraseblock or not.
-	 */
-	p = &sv->root.rb_node;
-	while (*p) {
-		int cmp_res;
-
-		parent = *p;
-		seb = rb_entry(parent, struct ubi_scan_leb, u.rb);
-		if (lnum != seb->lnum) {
-			if (lnum < seb->lnum)
-				p = &(*p)->rb_left;
-			else
-				p = &(*p)->rb_right;
-			continue;
-		}
-
-		/*
-		 * There is already a physical eraseblock describing the same
-		 * logical eraseblock present.
-		 */
-
-		dbg_bld("this LEB already exists: PEB %d, sqnum %llu, "
-			"LEB ver %u, EC %d", seb->pnum, seb->sqnum,
-			seb->leb_ver, seb->ec);
-
-		/*
-		 * Make sure that the logical eraseblocks have different
-		 * versions. Otherwise the image is bad.
-		 */
-		if (seb->leb_ver == leb_ver && leb_ver != 0) {
-			ubi_err("two LEBs with same version %u", leb_ver);
-			ubi_dbg_dump_seb(seb, 0);
-			ubi_dbg_dump_vid_hdr(vid_hdr);
-			return -EINVAL;
-		}
-
-		/*
-		 * Make sure that the logical eraseblocks have different
-		 * sequence numbers. Otherwise the image is bad.
-		 *
-		 * FIXME: remove 'sqnum != 0' check when leb_ver is removed.
-		 */
-		if (seb->sqnum == sqnum && sqnum != 0) {
-			ubi_err("two LEBs with same sequence number %llu",
-				sqnum);
-			ubi_dbg_dump_seb(seb, 0);
-			ubi_dbg_dump_vid_hdr(vid_hdr);
-			return -EINVAL;
-		}
-
-		/*
-		 * Now we have to drop the older one and preserve the newer
-		 * one.
-		 */
-		cmp_res = compare_lebs(ubi, seb, pnum, vid_hdr);
-		if (cmp_res < 0)
-			return cmp_res;
-
-		if (cmp_res & 1) {
-			/*
-			 * This logical eraseblock is newer then the one
-			 * found earlier.
-			 */
-			err = validate_vid_hdr(vid_hdr, sv, pnum);
-			if (err)
-				return err;
-
-			if (cmp_res & 4)
-				err = add_to_list(si, seb->pnum, seb->ec,
-						  &si->corr);
-			else
-				err = add_to_list(si, seb->pnum, seb->ec,
-						  &si->erase);
-			if (err)
-				return err;
-
-			seb->ec = ec;
-			seb->pnum = pnum;
-			seb->scrub = ((cmp_res & 2) || bitflips);
-			seb->sqnum = sqnum;
-			seb->leb_ver = leb_ver;
-
-			if (sv->highest_lnum == lnum)
-				sv->last_data_size =
-					be32_to_cpu(vid_hdr->data_size);
-
-			return 0;
-		} else {
-			/*
-			 * This logical eraseblock is older then the one found
-			 * previously.
-			 */
-			if (cmp_res & 4)
-				return add_to_list(si, pnum, ec, &si->corr);
-			else
-				return add_to_list(si, pnum, ec, &si->erase);
-		}
-	}
-
-	/*
-	 * We've met this logical eraseblock for the first time, add it to the
-	 * scanning information.
-	 */
-
-	err = validate_vid_hdr(vid_hdr, sv, pnum);
-	if (err)
-		return err;
-
-	seb = kmalloc(sizeof(struct ubi_scan_leb), GFP_KERNEL);
-	if (!seb)
-		return -ENOMEM;
-
-	seb->ec = ec;
-	seb->pnum = pnum;
-	seb->lnum = lnum;
-	seb->sqnum = sqnum;
-	seb->scrub = bitflips;
-	seb->leb_ver = leb_ver;
-
-	if (sv->highest_lnum <= lnum) {
-		sv->highest_lnum = lnum;
-		sv->last_data_size = be32_to_cpu(vid_hdr->data_size);
-	}
-
-	sv->leb_count += 1;
-	rb_link_node(&seb->u.rb, parent, p);
-	rb_insert_color(&seb->u.rb, &sv->root);
-	return 0;
-}
-
-/**
- * ubi_scan_find_sv - find information about a particular volume in the
- * scanning information.
- * @si: scanning information
- * @vol_id: the requested volume ID
- *
- * This function returns a pointer to the volume description or %NULL if there
- * are no data about this volume in the scanning information.
- */
-struct ubi_scan_volume *ubi_scan_find_sv(const struct ubi_scan_info *si,
-					 int vol_id)
-{
-	struct ubi_scan_volume *sv;
-	struct rb_node *p = si->volumes.rb_node;
-
-	while (p) {
-		sv = rb_entry(p, struct ubi_scan_volume, rb);
-
-		if (vol_id == sv->vol_id)
-			return sv;
-
-		if (vol_id > sv->vol_id)
-			p = p->rb_left;
-		else
-			p = p->rb_right;
-	}
-
-	return NULL;
-}
-
-/**
- * ubi_scan_find_seb - find information about a particular logical
- * eraseblock in the volume scanning information.
- * @sv: a pointer to the volume scanning information
- * @lnum: the requested logical eraseblock
- *
- * This function returns a pointer to the scanning logical eraseblock or %NULL
- * if there are no data about it in the scanning volume information.
- */
-struct ubi_scan_leb *ubi_scan_find_seb(const struct ubi_scan_volume *sv,
-				       int lnum)
-{
-	struct ubi_scan_leb *seb;
-	struct rb_node *p = sv->root.rb_node;
-
-	while (p) {
-		seb = rb_entry(p, struct ubi_scan_leb, u.rb);
-
-		if (lnum == seb->lnum)
-			return seb;
-
-		if (lnum > seb->lnum)
-			p = p->rb_left;
-		else
-			p = p->rb_right;
-	}
-
-	return NULL;
-}
-
-/**
- * ubi_scan_rm_volume - delete scanning information about a volume.
- * @si: scanning information
- * @sv: the volume scanning information to delete
- */
-void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv)
-{
-	struct rb_node *rb;
-	struct ubi_scan_leb *seb;
-
-	dbg_bld("remove scanning information about volume %d", sv->vol_id);
-
-	while ((rb = rb_first(&sv->root))) {
-		seb = rb_entry(rb, struct ubi_scan_leb, u.rb);
-		rb_erase(&seb->u.rb, &sv->root);
-		list_add_tail(&seb->u.list, &si->erase);
-	}
-
-	rb_erase(&sv->rb, &si->volumes);
-	kfree(sv);
-	si->vols_found -= 1;
-}
-
-/**
- * ubi_scan_erase_peb - erase a physical eraseblock.
- * @ubi: UBI device description object
- * @si: scanning information
- * @pnum: physical eraseblock number to erase;
- * @ec: erase counter value to write (%UBI_SCAN_UNKNOWN_EC if it is unknown)
- *
- * This function erases physical eraseblock 'pnum', and writes the erase
- * counter header to it. This function should only be used on UBI device
- * initialization stages, when the EBA unit had not been yet initialized. This
- * function returns zero in case of success and a negative error code in case
- * of failure.
- */
-int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si,
-		       int pnum, int ec)
-{
-	int err;
-	struct ubi_ec_hdr *ec_hdr;
-
-	if ((long long)ec >= UBI_MAX_ERASECOUNTER) {
-		/*
-		 * Erase counter overflow. Upgrade UBI and use 64-bit
-		 * erase counters internally.
-		 */
-		ubi_err("erase counter overflow at PEB %d, EC %d", pnum, ec);
-		return -EINVAL;
-	}
-
-	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
-	if (!ec_hdr)
-		return -ENOMEM;
-
-	ec_hdr->ec = cpu_to_be64(ec);
-
-	err = ubi_io_sync_erase(ubi, pnum, 0);
-	if (err < 0)
-		goto out_free;
-
-	err = ubi_io_write_ec_hdr(ubi, pnum, ec_hdr);
-
-out_free:
-	kfree(ec_hdr);
-	return err;
-}
-
-/**
- * ubi_scan_get_free_peb - get a free physical eraseblock.
- * @ubi: UBI device description object
- * @si: scanning information
- *
- * This function returns a free physical eraseblock. It is supposed to be
- * called on the UBI initialization stages when the wear-leveling unit is not
- * initialized yet. This function picks a physical eraseblocks from one of the
- * lists, writes the EC header if it is needed, and removes it from the list.
- *
- * This function returns scanning physical eraseblock information in case of
- * success and an error code in case of failure.
- */
-struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
-					   struct ubi_scan_info *si)
-{
-	int err = 0, i;
-	struct ubi_scan_leb *seb;
-
-	if (!list_empty(&si->free)) {
-		seb = list_entry(si->free.next, struct ubi_scan_leb, u.list);
-		list_del(&seb->u.list);
-		dbg_bld("return free PEB %d, EC %d", seb->pnum, seb->ec);
-		return seb;
-	}
-
-	for (i = 0; i < 2; i++) {
-		struct list_head *head;
-		struct ubi_scan_leb *tmp_seb;
-
-		if (i == 0)
-			head = &si->erase;
-		else
-			head = &si->corr;
-
-		/*
-		 * We try to erase the first physical eraseblock from the @head
-		 * list and pick it if we succeed, or try to erase the
-		 * next one if not. And so forth. We don't want to take care
-		 * about bad eraseblocks here - they'll be handled later.
-		 */
-		list_for_each_entry_safe(seb, tmp_seb, head, u.list) {
-			if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-				seb->ec = si->mean_ec;
-
-			err = ubi_scan_erase_peb(ubi, si, seb->pnum, seb->ec+1);
-			if (err)
-				continue;
-
-			seb->ec += 1;
-			list_del(&seb->u.list);
-			dbg_bld("return PEB %d, EC %d", seb->pnum, seb->ec);
-			return seb;
-		}
-	}
-
-	ubi_err("no eraseblocks found");
-	return ERR_PTR(-ENOSPC);
-}
-
-/**
- * process_eb - read UBI headers, check them and add corresponding data
- * to the scanning information.
- * @ubi: UBI device description object
- * @si: scanning information
- * @pnum: the physical eraseblock number
- *
- * This function returns a zero if the physical eraseblock was successfully
- * handled and a negative error code in case of failure.
- */
-static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, int pnum)
-{
-	long long uninitialized_var(ec);
-	int err, bitflips = 0, vol_id, ec_corr = 0;
-
-	dbg_bld("scan PEB %d", pnum);
-
-	/* Skip bad physical eraseblocks */
-	err = ubi_io_is_bad(ubi, pnum);
-	if (err < 0)
-		return err;
-	else if (err) {
-		/*
-		 * FIXME: this is actually duty of the I/O unit to initialize
-		 * this, but MTD does not provide enough information.
-		 */
-		si->bad_peb_count += 1;
-		return 0;
-	}
-
-	err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
-	if (err < 0)
-		return err;
-	else if (err == UBI_IO_BITFLIPS)
-		bitflips = 1;
-	else if (err == UBI_IO_PEB_EMPTY)
-		return add_to_list(si, pnum, UBI_SCAN_UNKNOWN_EC, &si->erase);
-	else if (err == UBI_IO_BAD_EC_HDR) {
-		/*
-		 * We have to also look at the VID header, possibly it is not
-		 * corrupted. Set %bitflips flag in order to make this PEB be
-		 * moved and EC be re-created.
-		 */
-		ec_corr = 1;
-		ec = UBI_SCAN_UNKNOWN_EC;
-		bitflips = 1;
-	}
-
-	si->is_empty = 0;
-
-	if (!ec_corr) {
-		/* Make sure UBI version is OK */
-		if (ech->version != UBI_VERSION) {
-			ubi_err("this UBI version is %d, image version is %d",
-				UBI_VERSION, (int)ech->version);
-			return -EINVAL;
-		}
-
-		ec = be64_to_cpu(ech->ec);
-		if (ec > UBI_MAX_ERASECOUNTER) {
-			/*
-			 * Erase counter overflow. The EC headers have 64 bits
-			 * reserved, but we anyway make use of only 31 bit
-			 * values, as this seems to be enough for any existing
-			 * flash. Upgrade UBI and use 64-bit erase counters
-			 * internally.
-			 */
-			ubi_err("erase counter overflow, max is %d",
-				UBI_MAX_ERASECOUNTER);
-			ubi_dbg_dump_ec_hdr(ech);
-			return -EINVAL;
-		}
-	}
-
-	/* OK, we've done with the EC header, let's look at the VID header */
-
-	err = ubi_io_read_vid_hdr(ubi, pnum, vidh, 0);
-	if (err < 0)
-		return err;
-	else if (err == UBI_IO_BITFLIPS)
-		bitflips = 1;
-	else if (err == UBI_IO_BAD_VID_HDR ||
-		 (err == UBI_IO_PEB_FREE && ec_corr)) {
-		/* VID header is corrupted */
-		err = add_to_list(si, pnum, ec, &si->corr);
-		if (err)
-			return err;
-		goto adjust_mean_ec;
-	} else if (err == UBI_IO_PEB_FREE) {
-		/* No VID header - the physical eraseblock is free */
-		err = add_to_list(si, pnum, ec, &si->free);
-		if (err)
-			return err;
-		goto adjust_mean_ec;
-	}
-
-	vol_id = be32_to_cpu(vidh->vol_id);
-	if (vol_id > UBI_MAX_VOLUMES && vol_id != UBI_LAYOUT_VOLUME_ID) {
-		int lnum = be32_to_cpu(vidh->lnum);
-
-		/* Unsupported internal volume */
-		switch (vidh->compat) {
-		case UBI_COMPAT_DELETE:
-			ubi_msg("\"delete\" compatible internal volume %d:%d"
-				" found, remove it", vol_id, lnum);
-			err = add_to_list(si, pnum, ec, &si->corr);
-			if (err)
-				return err;
-			break;
-
-		case UBI_COMPAT_RO:
-			ubi_msg("read-only compatible internal volume %d:%d"
-				" found, switch to read-only mode",
-				vol_id, lnum);
-			ubi->ro_mode = 1;
-			break;
-
-		case UBI_COMPAT_PRESERVE:
-			ubi_msg("\"preserve\" compatible internal volume %d:%d"
-				" found", vol_id, lnum);
-			err = add_to_list(si, pnum, ec, &si->alien);
-			if (err)
-				return err;
-			si->alien_peb_count += 1;
-			return 0;
-
-		case UBI_COMPAT_REJECT:
-			ubi_err("incompatible internal volume %d:%d found",
-				vol_id, lnum);
-			return -EINVAL;
-		}
-	}
-
-	/* Both UBI headers seem to be fine */
-	err = ubi_scan_add_used(ubi, si, pnum, ec, vidh, bitflips);
-	if (err)
-		return err;
-
-adjust_mean_ec:
-	if (!ec_corr) {
-		si->ec_sum += ec;
-		si->ec_count += 1;
-		if (ec > si->max_ec)
-			si->max_ec = ec;
-		if (ec < si->min_ec)
-			si->min_ec = ec;
-	}
-
-	return 0;
-}
-
-/**
- * ubi_scan - scan an MTD device.
- * @ubi: UBI device description object
- *
- * This function does full scanning of an MTD device and returns complete
- * information about it. In case of failure, an error code is returned.
- */
-struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
-{
-	int err, pnum;
-	struct rb_node *rb1, *rb2;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *seb;
-	struct ubi_scan_info *si;
-
-	si = kzalloc(sizeof(struct ubi_scan_info), GFP_KERNEL);
-	if (!si)
-		return ERR_PTR(-ENOMEM);
-
-	INIT_LIST_HEAD(&si->corr);
-	INIT_LIST_HEAD(&si->free);
-	INIT_LIST_HEAD(&si->erase);
-	INIT_LIST_HEAD(&si->alien);
-	si->volumes = RB_ROOT;
-	si->is_empty = 1;
-
-	err = -ENOMEM;
-	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
-	if (!ech)
-		goto out_si;
-
-	vidh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
-	if (!vidh)
-		goto out_ech;
-
-	for (pnum = 0; pnum < ubi->peb_count; pnum++) {
-		cond_resched();
-
-		dbg_msg("process PEB %d", pnum);
-		err = process_eb(ubi, si, pnum);
-		if (err < 0)
-			goto out_vidh;
-	}
-
-	dbg_msg("scanning is finished");
-
-	/* Calculate mean erase counter */
-	if (si->ec_count) {
-		do_div(si->ec_sum, si->ec_count);
-		si->mean_ec = si->ec_sum;
-	}
-
-	if (si->is_empty)
-		ubi_msg("empty MTD device detected");
-
-	/*
-	 * In case of unknown erase counter we use the mean erase counter
-	 * value.
-	 */
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb)
-			if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-				seb->ec = si->mean_ec;
-	}
-
-	list_for_each_entry(seb, &si->free, u.list) {
-		if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-			seb->ec = si->mean_ec;
-	}
-
-	list_for_each_entry(seb, &si->corr, u.list)
-		if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-			seb->ec = si->mean_ec;
-
-	list_for_each_entry(seb, &si->erase, u.list)
-		if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-			seb->ec = si->mean_ec;
-
-	err = paranoid_check_si(ubi, si);
-	if (err) {
-		if (err > 0)
-			err = -EINVAL;
-		goto out_vidh;
-	}
-
-	ubi_free_vid_hdr(ubi, vidh);
-	kfree(ech);
-
-	return si;
-
-out_vidh:
-	ubi_free_vid_hdr(ubi, vidh);
-out_ech:
-	kfree(ech);
-out_si:
-	ubi_scan_destroy_si(si);
-	return ERR_PTR(err);
-}
-
-/**
- * destroy_sv - free the scanning volume information
- * @sv: scanning volume information
- *
- * This function destroys the volume RB-tree (@sv->root) and the scanning
- * volume information.
- */
-static void destroy_sv(struct ubi_scan_volume *sv)
-{
-	struct ubi_scan_leb *seb;
-	struct rb_node *this = sv->root.rb_node;
-
-	while (this) {
-		if (this->rb_left)
-			this = this->rb_left;
-		else if (this->rb_right)
-			this = this->rb_right;
-		else {
-			seb = rb_entry(this, struct ubi_scan_leb, u.rb);
-			this = rb_parent(this);
-			if (this) {
-				if (this->rb_left == &seb->u.rb)
-					this->rb_left = NULL;
-				else
-					this->rb_right = NULL;
-			}
-
-			kfree(seb);
-		}
-	}
-	kfree(sv);
-}
-
-/**
- * ubi_scan_destroy_si - destroy scanning information.
- * @si: scanning information
- */
-void ubi_scan_destroy_si(struct ubi_scan_info *si)
-{
-	struct ubi_scan_leb *seb, *seb_tmp;
-	struct ubi_scan_volume *sv;
-	struct rb_node *rb;
-
-	list_for_each_entry_safe(seb, seb_tmp, &si->alien, u.list) {
-		list_del(&seb->u.list);
-		kfree(seb);
-	}
-	list_for_each_entry_safe(seb, seb_tmp, &si->erase, u.list) {
-		list_del(&seb->u.list);
-		kfree(seb);
-	}
-	list_for_each_entry_safe(seb, seb_tmp, &si->corr, u.list) {
-		list_del(&seb->u.list);
-		kfree(seb);
-	}
-	list_for_each_entry_safe(seb, seb_tmp, &si->free, u.list) {
-		list_del(&seb->u.list);
-		kfree(seb);
-	}
-
-	/* Destroy the volume RB-tree */
-	rb = si->volumes.rb_node;
-	while (rb) {
-		if (rb->rb_left)
-			rb = rb->rb_left;
-		else if (rb->rb_right)
-			rb = rb->rb_right;
-		else {
-			sv = rb_entry(rb, struct ubi_scan_volume, rb);
-
-			rb = rb_parent(rb);
-			if (rb) {
-				if (rb->rb_left == &sv->rb)
-					rb->rb_left = NULL;
-				else
-					rb->rb_right = NULL;
-			}
-
-			destroy_sv(sv);
-		}
-	}
-
-	kfree(si);
-}
-
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-
-/**
- * paranoid_check_si - check if the scanning information is correct and
- * consistent.
- * @ubi: UBI device description object
- * @si: scanning information
- *
- * This function returns zero if the scanning information is all right, %1 if
- * not and a negative error code if an error occurred.
- */
-static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si)
-{
-	int pnum, err, vols_found = 0;
-	struct rb_node *rb1, *rb2;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *seb, *last_seb;
-	uint8_t *buf;
-
-	/*
-	 * At first, check that scanning information is OK.
-	 */
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
-		int leb_count = 0;
-
-		cond_resched();
-
-		vols_found += 1;
-
-		if (si->is_empty) {
-			ubi_err("bad is_empty flag");
-			goto bad_sv;
-		}
-
-		if (sv->vol_id < 0 || sv->highest_lnum < 0 ||
-		    sv->leb_count < 0 || sv->vol_type < 0 || sv->used_ebs < 0 ||
-		    sv->data_pad < 0 || sv->last_data_size < 0) {
-			ubi_err("negative values");
-			goto bad_sv;
-		}
-
-		if (sv->vol_id >= UBI_MAX_VOLUMES &&
-		    sv->vol_id < UBI_INTERNAL_VOL_START) {
-			ubi_err("bad vol_id");
-			goto bad_sv;
-		}
-
-		if (sv->vol_id > si->highest_vol_id) {
-			ubi_err("highest_vol_id is %d, but vol_id %d is there",
-				si->highest_vol_id, sv->vol_id);
-			goto out;
-		}
-
-		if (sv->vol_type != UBI_DYNAMIC_VOLUME &&
-		    sv->vol_type != UBI_STATIC_VOLUME) {
-			ubi_err("bad vol_type");
-			goto bad_sv;
-		}
-
-		if (sv->data_pad > ubi->leb_size / 2) {
-			ubi_err("bad data_pad");
-			goto bad_sv;
-		}
-
-		last_seb = NULL;
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb) {
-			cond_resched();
-
-			last_seb = seb;
-			leb_count += 1;
-
-			if (seb->pnum < 0 || seb->ec < 0) {
-				ubi_err("negative values");
-				goto bad_seb;
-			}
-
-			if (seb->ec < si->min_ec) {
-				ubi_err("bad si->min_ec (%d), %d found",
-					si->min_ec, seb->ec);
-				goto bad_seb;
-			}
-
-			if (seb->ec > si->max_ec) {
-				ubi_err("bad si->max_ec (%d), %d found",
-					si->max_ec, seb->ec);
-				goto bad_seb;
-			}
-
-			if (seb->pnum >= ubi->peb_count) {
-				ubi_err("too high PEB number %d, total PEBs %d",
-					seb->pnum, ubi->peb_count);
-				goto bad_seb;
-			}
-
-			if (sv->vol_type == UBI_STATIC_VOLUME) {
-				if (seb->lnum >= sv->used_ebs) {
-					ubi_err("bad lnum or used_ebs");
-					goto bad_seb;
-				}
-			} else {
-				if (sv->used_ebs != 0) {
-					ubi_err("non-zero used_ebs");
-					goto bad_seb;
-				}
-			}
-
-			if (seb->lnum > sv->highest_lnum) {
-				ubi_err("incorrect highest_lnum or lnum");
-				goto bad_seb;
-			}
-		}
-
-		if (sv->leb_count != leb_count) {
-			ubi_err("bad leb_count, %d objects in the tree",
-				leb_count);
-			goto bad_sv;
-		}
-
-		if (!last_seb)
-			continue;
-
-		seb = last_seb;
-
-		if (seb->lnum != sv->highest_lnum) {
-			ubi_err("bad highest_lnum");
-			goto bad_seb;
-		}
-	}
-
-	if (vols_found != si->vols_found) {
-		ubi_err("bad si->vols_found %d, should be %d",
-			si->vols_found, vols_found);
-		goto out;
-	}
-
-	/* Check that scanning information is correct */
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
-		last_seb = NULL;
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb) {
-			int vol_type;
-
-			cond_resched();
-
-			last_seb = seb;
-
-			err = ubi_io_read_vid_hdr(ubi, seb->pnum, vidh, 1);
-			if (err && err != UBI_IO_BITFLIPS) {
-				ubi_err("VID header is not OK (%d)", err);
-				if (err > 0)
-					err = -EIO;
-				return err;
-			}
-
-			vol_type = vidh->vol_type == UBI_VID_DYNAMIC ?
-				   UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
-			if (sv->vol_type != vol_type) {
-				ubi_err("bad vol_type");
-				goto bad_vid_hdr;
-			}
-
-			if (seb->sqnum != be64_to_cpu(vidh->sqnum)) {
-				ubi_err("bad sqnum %llu", seb->sqnum);
-				goto bad_vid_hdr;
-			}
-
-			if (sv->vol_id != be32_to_cpu(vidh->vol_id)) {
-				ubi_err("bad vol_id %d", sv->vol_id);
-				goto bad_vid_hdr;
-			}
-
-			if (sv->compat != vidh->compat) {
-				ubi_err("bad compat %d", vidh->compat);
-				goto bad_vid_hdr;
-			}
-
-			if (seb->lnum != be32_to_cpu(vidh->lnum)) {
-				ubi_err("bad lnum %d", seb->lnum);
-				goto bad_vid_hdr;
-			}
-
-			if (sv->used_ebs != be32_to_cpu(vidh->used_ebs)) {
-				ubi_err("bad used_ebs %d", sv->used_ebs);
-				goto bad_vid_hdr;
-			}
-
-			if (sv->data_pad != be32_to_cpu(vidh->data_pad)) {
-				ubi_err("bad data_pad %d", sv->data_pad);
-				goto bad_vid_hdr;
-			}
-
-			if (seb->leb_ver != be32_to_cpu(vidh->leb_ver)) {
-				ubi_err("bad leb_ver %u", seb->leb_ver);
-				goto bad_vid_hdr;
-			}
-		}
-
-		if (!last_seb)
-			continue;
-
-		if (sv->highest_lnum != be32_to_cpu(vidh->lnum)) {
-			ubi_err("bad highest_lnum %d", sv->highest_lnum);
-			goto bad_vid_hdr;
-		}
-
-		if (sv->last_data_size != be32_to_cpu(vidh->data_size)) {
-			ubi_err("bad last_data_size %d", sv->last_data_size);
-			goto bad_vid_hdr;
-		}
-	}
-
-	/*
-	 * Make sure that all the physical eraseblocks are in one of the lists
-	 * or trees.
-	 */
-	buf = kzalloc(ubi->peb_count, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	for (pnum = 0; pnum < ubi->peb_count; pnum++) {
-		err = ubi_io_is_bad(ubi, pnum);
-		if (err < 0) {
-			kfree(buf);
-			return err;
-		}
-		else if (err)
-			buf[pnum] = 1;
-	}
-
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb)
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb)
-			buf[seb->pnum] = 1;
-
-	list_for_each_entry(seb, &si->free, u.list)
-		buf[seb->pnum] = 1;
-
-	list_for_each_entry(seb, &si->corr, u.list)
-		buf[seb->pnum] = 1;
-
-	list_for_each_entry(seb, &si->erase, u.list)
-		buf[seb->pnum] = 1;
-
-	list_for_each_entry(seb, &si->alien, u.list)
-		buf[seb->pnum] = 1;
-
-	err = 0;
-	for (pnum = 0; pnum < ubi->peb_count; pnum++)
-		if (!buf[pnum]) {
-			ubi_err("PEB %d is not referred", pnum);
-			err = 1;
-		}
-
-	kfree(buf);
-	if (err)
-		goto out;
-	return 0;
-
-bad_seb:
-	ubi_err("bad scanning information about LEB %d", seb->lnum);
-	ubi_dbg_dump_seb(seb, 0);
-	ubi_dbg_dump_sv(sv);
-	goto out;
-
-bad_sv:
-	ubi_err("bad scanning information about volume %d", sv->vol_id);
-	ubi_dbg_dump_sv(sv);
-	goto out;
-
-bad_vid_hdr:
-	ubi_err("bad scanning information about volume %d", sv->vol_id);
-	ubi_dbg_dump_sv(sv);
-	ubi_dbg_dump_vid_hdr(vidh);
-
-out:
-	ubi_dbg_dump_stack();
-	return 1;
-}
-
-#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
deleted file mode 100644
index 252b1f1..0000000
--- a/drivers/mtd/ubi/scan.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Author: Artem Bityutskiy (Битюцкий Артём)
- */
-
-#ifndef __UBI_SCAN_H__
-#define __UBI_SCAN_H__
-
-/* The erase counter value for this physical eraseblock is unknown */
-#define UBI_SCAN_UNKNOWN_EC (-1)
-
-/**
- * struct ubi_scan_leb - scanning information about a physical eraseblock.
- * @ec: erase counter (%UBI_SCAN_UNKNOWN_EC if it is unknown)
- * @pnum: physical eraseblock number
- * @lnum: logical eraseblock number
- * @scrub: if this physical eraseblock needs scrubbing
- * @sqnum: sequence number
- * @u: unions RB-tree or @list links
- * @u.rb: link in the per-volume RB-tree of &struct ubi_scan_leb objects
- * @u.list: link in one of the eraseblock lists
- * @leb_ver: logical eraseblock version (obsolete)
- *
- * One object of this type is allocated for each physical eraseblock during
- * scanning.
- */
-struct ubi_scan_leb {
-	int ec;
-	int pnum;
-	int lnum;
-	int scrub;
-	unsigned long long sqnum;
-	union {
-		struct rb_node rb;
-		struct list_head list;
-	} u;
-	uint32_t leb_ver;
-};
-
-/**
- * struct ubi_scan_volume - scanning information about a volume.
- * @vol_id: volume ID
- * @highest_lnum: highest logical eraseblock number in this volume
- * @leb_count: number of logical eraseblocks in this volume
- * @vol_type: volume type
- * @used_ebs: number of used logical eraseblocks in this volume (only for
- * static volumes)
- * @last_data_size: amount of data in the last logical eraseblock of this
- * volume (always equivalent to the usable logical eraseblock size in case of
- * dynamic volumes)
- * @data_pad: how many bytes at the end of logical eraseblocks of this volume
- * are not used (due to volume alignment)
- * @compat: compatibility flags of this volume
- * @rb: link in the volume RB-tree
- * @root: root of the RB-tree containing all the eraseblock belonging to this
- * volume (&struct ubi_scan_leb objects)
- *
- * One object of this type is allocated for each volume during scanning.
- */
-struct ubi_scan_volume {
-	int vol_id;
-	int highest_lnum;
-	int leb_count;
-	int vol_type;
-	int used_ebs;
-	int last_data_size;
-	int data_pad;
-	int compat;
-	struct rb_node rb;
-	struct rb_root root;
-};
-
-/**
- * struct ubi_scan_info - UBI scanning information.
- * @volumes: root of the volume RB-tree
- * @corr: list of corrupted physical eraseblocks
- * @free: list of free physical eraseblocks
- * @erase: list of physical eraseblocks which have to be erased
- * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
- * @bad_peb_count: count of bad physical eraseblocks
- * those belonging to "preserve"-compatible internal volumes)
- * @vols_found: number of volumes found during scanning
- * @highest_vol_id: highest volume ID
- * @alien_peb_count: count of physical eraseblocks in the @alien list
- * @is_empty: flag indicating whether the MTD device is empty or not
- * @min_ec: lowest erase counter value
- * @max_ec: highest erase counter value
- * @max_sqnum: highest sequence number value
- * @mean_ec: mean erase counter value
- * @ec_sum: a temporary variable used when calculating @mean_ec
- * @ec_count: a temporary variable used when calculating @mean_ec
- *
- * This data structure contains the result of scanning and may be used by other
- * UBI units to build final UBI data structures, further error-recovery and so
- * on.
- */
-struct ubi_scan_info {
-	struct rb_root volumes;
-	struct list_head corr;
-	struct list_head free;
-	struct list_head erase;
-	struct list_head alien;
-	int bad_peb_count;
-	int vols_found;
-	int highest_vol_id;
-	int alien_peb_count;
-	int is_empty;
-	int min_ec;
-	int max_ec;
-	unsigned long long max_sqnum;
-	int mean_ec;
-	uint64_t ec_sum;
-	int ec_count;
-};
-
-struct ubi_device;
-struct ubi_vid_hdr;
-
-/*
- * ubi_scan_move_to_list - move a physical eraseblock from the volume tree to a
- * list.
- *
- * @sv: volume scanning information
- * @seb: scanning eraseblock infprmation
- * @list: the list to move to
- */
-static inline void ubi_scan_move_to_list(struct ubi_scan_volume *sv,
-					 struct ubi_scan_leb *seb,
-					 struct list_head *list)
-{
-		rb_erase(&seb->u.rb, &sv->root);
-		list_add_tail(&seb->u.list, list);
-}
-
-int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
-		      int pnum, int ec, const struct ubi_vid_hdr *vid_hdr,
-		      int bitflips);
-struct ubi_scan_volume *ubi_scan_find_sv(const struct ubi_scan_info *si,
-					 int vol_id);
-struct ubi_scan_leb *ubi_scan_find_seb(const struct ubi_scan_volume *sv,
-				       int lnum);
-void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv);
-struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
-					   struct ubi_scan_info *si);
-int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si,
-		       int pnum, int ec);
-struct ubi_scan_info *ubi_scan(struct ubi_device *ubi);
-void ubi_scan_destroy_si(struct ubi_scan_info *si);
-
-#endif /* !__UBI_SCAN_H__ */
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index 9012326..2809805 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -86,10 +86,11 @@ enum {
  * Compatibility constants used by internal volumes.
  *
  * @UBI_COMPAT_DELETE: delete this internal volume before anything is written
- * to the flash
+ *                     to the flash
  * @UBI_COMPAT_RO: attach this device in read-only mode
  * @UBI_COMPAT_PRESERVE: preserve this internal volume - do not touch its
- * physical eraseblocks, don't allow the wear-leveling unit to move them
+ *                       physical eraseblocks, don't allow the wear-leveling
+ *                       sub-system to move them
  * @UBI_COMPAT_REJECT: reject this UBI image
  */
 enum {
@@ -111,18 +112,19 @@ enum {
  * struct ubi_ec_hdr - UBI erase counter header.
  * @magic: erase counter header magic number (%UBI_EC_HDR_MAGIC)
  * @version: version of UBI implementation which is supposed to accept this
- * UBI image
+ *           UBI image
  * @padding1: reserved for future, zeroes
  * @ec: the erase counter
  * @vid_hdr_offset: where the VID header starts
  * @data_offset: where the user data start
+ * @image_seq: image sequence number
  * @padding2: reserved for future, zeroes
  * @hdr_crc: erase counter header CRC checksum
  *
  * The erase counter header takes 64 bytes and has a plenty of unused space for
  * future usage. The unused fields are zeroed. The @version field is used to
  * indicate the version of UBI implementation which is supposed to be able to
- * work with this UBI image. If @version is greater then the current UBI
+ * work with this UBI image. If @version is greater than the current UBI
  * version, the image is rejected. This may be useful in future if something
  * is changed radically. This field is duplicated in the volume identifier
  * header.
@@ -131,6 +133,14 @@ enum {
  * volume identifier header and user data, relative to the beginning of the
  * physical eraseblock. These values have to be the same for all physical
  * eraseblocks.
+ *
+ * The @image_seq field is used to validate a UBI image that has been prepared
+ * for a UBI device. The @image_seq value can be any value, but it must be the
+ * same on all eraseblocks. UBI will ensure that all new erase counter headers
+ * also contain this value, and will check the value when attaching the flash.
+ * One way to make use of @image_seq is to increase its value by one every time
+ * an image is flashed over an existing image, then, if the flashing does not
+ * complete, UBI will detect the error when attaching the media.
  */
 struct ubi_ec_hdr {
 	__be32  magic;
@@ -139,32 +149,32 @@ struct ubi_ec_hdr {
 	__be64  ec; /* Warning: the current limit is 31-bit anyway! */
 	__be32  vid_hdr_offset;
 	__be32  data_offset;
-	__u8    padding2[36];
+	__be32  image_seq;
+	__u8    padding2[32];
 	__be32  hdr_crc;
-} __attribute__ ((packed));
+} __packed;
 
 /**
  * struct ubi_vid_hdr - on-flash UBI volume identifier header.
  * @magic: volume identifier header magic number (%UBI_VID_HDR_MAGIC)
  * @version: UBI implementation version which is supposed to accept this UBI
- * image (%UBI_VERSION)
+ *           image (%UBI_VERSION)
  * @vol_type: volume type (%UBI_VID_DYNAMIC or %UBI_VID_STATIC)
  * @copy_flag: if this logical eraseblock was copied from another physical
- * eraseblock (for wear-leveling reasons)
+ *             eraseblock (for wear-leveling reasons)
  * @compat: compatibility of this volume (%0, %UBI_COMPAT_DELETE,
- * %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT)
+ *          %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT)
  * @vol_id: ID of this volume
  * @lnum: logical eraseblock number
- * @leb_ver: version of this logical eraseblock (IMPORTANT: obsolete, to be
- * removed, kept only for not breaking older UBI users)
+ * @padding1: reserved for future, zeroes
  * @data_size: how many bytes of data this logical eraseblock contains
  * @used_ebs: total number of used logical eraseblocks in this volume
  * @data_pad: how many bytes at the end of this physical eraseblock are not
- * used
+ *            used
  * @data_crc: CRC checksum of the data stored in this logical eraseblock
- * @padding1: reserved for future, zeroes
- * @sqnum: sequence number
  * @padding2: reserved for future, zeroes
+ * @sqnum: sequence number
+ * @padding3: reserved for future, zeroes
  * @hdr_crc: volume identifier header CRC checksum
  *
  * The @sqnum is the value of the global sequence counter at the time when this
@@ -175,7 +185,7 @@ struct ubi_ec_hdr {
  * (sequence number) is used to distinguish between older and newer versions of
  * logical eraseblocks.
  *
- * There are 2 situations when there may be more then one physical eraseblock
+ * There are 2 situations when there may be more than one physical eraseblock
  * corresponding to the same logical eraseblock, i.e., having the same @vol_id
  * and @lnum values in the volume identifier header. Suppose we have a logical
  * eraseblock L and it is mapped to the physical eraseblock P.
@@ -212,10 +222,6 @@ struct ubi_ec_hdr {
  * checksum is correct, this physical eraseblock is selected (P1). Otherwise
  * the older one (P) is selected.
  *
- * Note, there is an obsolete @leb_ver field which was used instead of @sqnum
- * in the past. But it is not used anymore and we keep it in order to be able
- * to deal with old UBI images. It will be removed at some point.
- *
  * There are 2 sorts of volumes in UBI: user volumes and internal volumes.
  * Internal volumes are not seen from outside and are used for various internal
  * UBI purposes. In this implementation there is only one internal volume - the
@@ -236,9 +242,9 @@ struct ubi_ec_hdr {
  * The @data_crc field contains the CRC checksum of the contents of the logical
  * eraseblock if this is a static volume. In case of dynamic volumes, it does
  * not contain the CRC checksum as a rule. The only exception is when the
- * data of the physical eraseblock was moved by the wear-leveling unit, then
- * the wear-leveling unit calculates the data CRC and stores it in the
- * @data_crc field. And of course, the @copy_flag is %in this case.
+ * data of the physical eraseblock was moved by the wear-leveling sub-system,
+ * then the wear-leveling sub-system calculates the data CRC and stores it in
+ * the @data_crc field. And of course, the @copy_flag is %in this case.
  *
  * The @data_size field is used only for static volumes because UBI has to know
  * how many bytes of data are stored in this eraseblock. For dynamic volumes,
@@ -265,23 +271,23 @@ struct ubi_vid_hdr {
 	__u8    compat;
 	__be32  vol_id;
 	__be32  lnum;
-	__be32  leb_ver; /* obsolete, to be removed, don't use */
+	__u8    padding1[4];
 	__be32  data_size;
 	__be32  used_ebs;
 	__be32  data_pad;
 	__be32  data_crc;
-	__u8    padding1[4];
+	__u8    padding2[4];
 	__be64  sqnum;
-	__u8    padding2[12];
+	__u8    padding3[12];
 	__be32  hdr_crc;
-} __attribute__ ((packed));
+} __packed;
 
 /* Internal UBI volumes count */
 #define UBI_INT_VOL_COUNT 1
 
 /*
- * Starting ID of internal volumes. There is reserved room for 4096 internal
- * volumes.
+ * Starting ID of internal volumes: 0x7fffefff.
+ * There is reserved room for 4096 internal volumes.
  */
 #define UBI_INTERNAL_VOL_START (0x7FFFFFFF - 4096)
 
@@ -351,10 +357,151 @@ struct ubi_vtbl_record {
 	__u8    vol_type;
 	__u8    upd_marker;
 	__be16  name_len;
+#ifndef __UBOOT__
 	__u8    name[UBI_VOL_NAME_MAX+1];
+#else
+	char    name[UBI_VOL_NAME_MAX+1];
+#endif
 	__u8    flags;
 	__u8    padding[23];
 	__be32  crc;
-} __attribute__ ((packed));
+} __packed;
+
+/* UBI fastmap on-flash data structures */
+
+#define UBI_FM_SB_VOLUME_ID	(UBI_LAYOUT_VOLUME_ID + 1)
+#define UBI_FM_DATA_VOLUME_ID	(UBI_LAYOUT_VOLUME_ID + 2)
 
+/* fastmap on-flash data structure format version */
+#define UBI_FM_FMT_VERSION	1
+
+#define UBI_FM_SB_MAGIC		0x7B11D69F
+#define UBI_FM_HDR_MAGIC	0xD4B82EF7
+#define UBI_FM_VHDR_MAGIC	0xFA370ED1
+#define UBI_FM_POOL_MAGIC	0x67AF4D08
+#define UBI_FM_EBA_MAGIC	0xf0c040a8
+
+/* A fastmap supber block can be located between PEB 0 and
+ * UBI_FM_MAX_START */
+#define UBI_FM_MAX_START	64
+
+/* A fastmap can use up to UBI_FM_MAX_BLOCKS PEBs */
+#define UBI_FM_MAX_BLOCKS	32
+
+/* 5% of the total number of PEBs have to be scanned while attaching
+ * from a fastmap.
+ * But the size of this pool is limited to be between UBI_FM_MIN_POOL_SIZE and
+ * UBI_FM_MAX_POOL_SIZE */
+#define UBI_FM_MIN_POOL_SIZE	8
+#define UBI_FM_MAX_POOL_SIZE	256
+
+#define UBI_FM_WL_POOL_SIZE	25
+
+/**
+ * struct ubi_fm_sb - UBI fastmap super block
+ * @magic: fastmap super block magic number (%UBI_FM_SB_MAGIC)
+ * @version: format version of this fastmap
+ * @data_crc: CRC over the fastmap data
+ * @used_blocks: number of PEBs used by this fastmap
+ * @block_loc: an array containing the location of all PEBs of the fastmap
+ * @block_ec: the erase counter of each used PEB
+ * @sqnum: highest sequence number value at the time while taking the fastmap
+ *
+ */
+struct ubi_fm_sb {
+	__be32 magic;
+	__u8 version;
+	__u8 padding1[3];
+	__be32 data_crc;
+	__be32 used_blocks;
+	__be32 block_loc[UBI_FM_MAX_BLOCKS];
+	__be32 block_ec[UBI_FM_MAX_BLOCKS];
+	__be64 sqnum;
+	__u8 padding2[32];
+} __packed;
+
+/**
+ * struct ubi_fm_hdr - header of the fastmap data set
+ * @magic: fastmap header magic number (%UBI_FM_HDR_MAGIC)
+ * @free_peb_count: number of free PEBs known by this fastmap
+ * @used_peb_count: number of used PEBs known by this fastmap
+ * @scrub_peb_count: number of to be scrubbed PEBs known by this fastmap
+ * @bad_peb_count: number of bad PEBs known by this fastmap
+ * @erase_peb_count: number of bad PEBs which have to be erased
+ * @vol_count: number of UBI volumes known by this fastmap
+ */
+struct ubi_fm_hdr {
+	__be32 magic;
+	__be32 free_peb_count;
+	__be32 used_peb_count;
+	__be32 scrub_peb_count;
+	__be32 bad_peb_count;
+	__be32 erase_peb_count;
+	__be32 vol_count;
+	__u8 padding[4];
+} __packed;
+
+/* struct ubi_fm_hdr is followed by two struct ubi_fm_scan_pool */
+
+/**
+ * struct ubi_fm_scan_pool - Fastmap pool PEBs to be scanned while attaching
+ * @magic: pool magic numer (%UBI_FM_POOL_MAGIC)
+ * @size: current pool size
+ * @max_size: maximal pool size
+ * @pebs: an array containing the location of all PEBs in this pool
+ */
+struct ubi_fm_scan_pool {
+	__be32 magic;
+	__be16 size;
+	__be16 max_size;
+	__be32 pebs[UBI_FM_MAX_POOL_SIZE];
+	__be32 padding[4];
+} __packed;
+
+/* ubi_fm_scan_pool is followed by nfree+nused struct ubi_fm_ec records */
+
+/**
+ * struct ubi_fm_ec - stores the erase counter of a PEB
+ * @pnum: PEB number
+ * @ec: ec of this PEB
+ */
+struct ubi_fm_ec {
+	__be32 pnum;
+	__be32 ec;
+} __packed;
+
+/**
+ * struct ubi_fm_volhdr - Fastmap volume header
+ * it identifies the start of an eba table
+ * @magic: Fastmap volume header magic number (%UBI_FM_VHDR_MAGIC)
+ * @vol_id: volume id of the fastmapped volume
+ * @vol_type: type of the fastmapped volume
+ * @data_pad: data_pad value of the fastmapped volume
+ * @used_ebs: number of used LEBs within this volume
+ * @last_eb_bytes: number of bytes used in the last LEB
+ */
+struct ubi_fm_volhdr {
+	__be32 magic;
+	__be32 vol_id;
+	__u8 vol_type;
+	__u8 padding1[3];
+	__be32 data_pad;
+	__be32 used_ebs;
+	__be32 last_eb_bytes;
+	__u8 padding2[8];
+} __packed;
+
+/* struct ubi_fm_volhdr is followed by one struct ubi_fm_eba records */
+
+/**
+ * struct ubi_fm_eba - denotes an association beween a PEB and LEB
+ * @magic: EBA table magic number
+ * @reserved_pebs: number of table entries
+ * @pnum: PEB number of LEB (LEB is the index)
+ */
+struct ubi_fm_eba {
+	__be32 magic;
+	__be32 reserved_pebs;
+	__be32 pnum[0];
+} __packed;
 #endif /* !__UBI_MEDIA_H__ */
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index f4f7165..c814847 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -10,7 +10,8 @@
 #ifndef __UBI_UBI_H__
 #define __UBI_UBI_H__
 
-#ifdef UBI_LINUX
+#define __UBOOT__
+#ifndef __UBOOT__
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/list.h>
@@ -23,22 +24,18 @@
 #include <linux/fs.h>
 #include <linux/cdev.h>
 #include <linux/device.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/vmalloc.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/ubi.h>
+#include <linux/notifier.h>
+#include <asm/pgtable.h>
+#else
+#include <ubi_uboot.h>
 #endif
-
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/rbtree.h>
-#include <linux/string.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/ubi.h>
-
 #include "ubi-media.h"
-#include "scan.h"
-#include "debug.h"
+#include <mtd/ubi-user.h>
 
 /* Maximum number of supported UBI devices */
 #define UBI_MAX_DEVICES 32
@@ -52,20 +49,21 @@
 #else
 #define ubi_msg(fmt, ...) printk(KERN_NOTICE "UBI: " fmt "\n", ##__VA_ARGS__)
 #endif
+
 /* UBI warning messages */
-#define ubi_warn(fmt, ...) printk(KERN_WARNING "UBI warning: %s: " fmt "\n", \
-				  __func__, ##__VA_ARGS__)
+#define ubi_warn(fmt, ...) pr_warn("UBI warning: %s: " fmt "\n",  \
+				   __func__, ##__VA_ARGS__)
 /* UBI error messages */
-#define ubi_err(fmt, ...) printk(KERN_ERR "UBI error: %s: " fmt "\n", \
+#define ubi_err(fmt, ...) pr_err("UBI error: %s: " fmt "\n",      \
 				 __func__, ##__VA_ARGS__)
 
-/* Lowest number PEBs reserved for bad PEB handling */
-#define MIN_RESEVED_PEBS 2
-
 /* Background thread name pattern */
 #define UBI_BGT_NAME_PATTERN "ubi_bgt%dd"
 
-/* This marker in the EBA table means that the LEB is um-mapped */
+/*
+ * This marker in the EBA table means that the LEB is um-mapped.
+ * NOTE! It has to have the same value as %UBI_ALL.
+ */
 #define UBI_LEB_UNMAPPED -1
 
 /*
@@ -75,37 +73,98 @@
 #define UBI_IO_RETRIES 3
 
 /*
- * Error codes returned by the I/O unit.
- *
- * UBI_IO_PEB_EMPTY: the physical eraseblock is empty, i.e. it contains only
- * 0xFF bytes
- * UBI_IO_PEB_FREE: the physical eraseblock is free, i.e. it contains only a
- * valid erase counter header, and the rest are %0xFF bytes
- * UBI_IO_BAD_EC_HDR: the erase counter header is corrupted (bad magic or CRC)
- * UBI_IO_BAD_VID_HDR: the volume identifier header is corrupted (bad magic or
- * CRC)
+ * Length of the protection queue. The length is effectively equivalent to the
+ * number of (global) erase cycles PEBs are protected from the wear-leveling
+ * worker.
+ */
+#define UBI_PROT_QUEUE_LEN 10
+
+/* The volume ID/LEB number/erase counter is unknown */
+#define UBI_UNKNOWN -1
+
+/*
+ * The UBI debugfs directory name pattern and maximum name length (3 for "ubi"
+ * + 2 for the number plus 1 for the trailing zero byte.
+ */
+#define UBI_DFS_DIR_NAME "ubi%d"
+#define UBI_DFS_DIR_LEN  (3 + 2 + 1)
+
+/*
+ * Error codes returned by the I/O sub-system.
+ *
+ * UBI_IO_FF: the read region of flash contains only 0xFFs
+ * UBI_IO_FF_BITFLIPS: the same as %UBI_IO_FF, but also also there was a data
+ *                     integrity error reported by the MTD driver
+ *                     (uncorrectable ECC error in case of NAND)
+ * UBI_IO_BAD_HDR: the EC or VID header is corrupted (bad magic or CRC)
+ * UBI_IO_BAD_HDR_EBADMSG: the same as %UBI_IO_BAD_HDR, but also there was a
+ *                         data integrity error reported by the MTD driver
+ *                         (uncorrectable ECC error in case of NAND)
  * UBI_IO_BITFLIPS: bit-flips were detected and corrected
+ *
+ * Note, it is probably better to have bit-flip and ebadmsg as flags which can
+ * be or'ed with other error code. But this is a big change because there are
+ * may callers, so it does not worth the risk of introducing a bug
  */
 enum {
-	UBI_IO_PEB_EMPTY = 1,
-	UBI_IO_PEB_FREE,
-	UBI_IO_BAD_EC_HDR,
-	UBI_IO_BAD_VID_HDR,
-	UBI_IO_BITFLIPS
+	UBI_IO_FF = 1,
+	UBI_IO_FF_BITFLIPS,
+	UBI_IO_BAD_HDR,
+	UBI_IO_BAD_HDR_EBADMSG,
+	UBI_IO_BITFLIPS,
+};
+
+/*
+ * Return codes of the 'ubi_eba_copy_leb()' function.
+ *
+ * MOVE_CANCEL_RACE: canceled because the volume is being deleted, the source
+ *                   PEB was put meanwhile, or there is I/O on the source PEB
+ * MOVE_SOURCE_RD_ERR: canceled because there was a read error from the source
+ *                     PEB
+ * MOVE_TARGET_RD_ERR: canceled because there was a read error from the target
+ *                     PEB
+ * MOVE_TARGET_WR_ERR: canceled because there was a write error to the target
+ *                     PEB
+ * MOVE_TARGET_BITFLIPS: canceled because a bit-flip was detected in the
+ *                       target PEB
+ * MOVE_RETRY: retry scrubbing the PEB
+ */
+enum {
+	MOVE_CANCEL_RACE = 1,
+	MOVE_SOURCE_RD_ERR,
+	MOVE_TARGET_RD_ERR,
+	MOVE_TARGET_WR_ERR,
+	MOVE_TARGET_BITFLIPS,
+	MOVE_RETRY,
+};
+
+/*
+ * Return codes of the fastmap sub-system
+ *
+ * UBI_NO_FASTMAP: No fastmap super block was found
+ * UBI_BAD_FASTMAP: A fastmap was found but it's unusable
+ */
+enum {
+	UBI_NO_FASTMAP = 1,
+	UBI_BAD_FASTMAP,
 };
 
 /**
  * struct ubi_wl_entry - wear-leveling entry.
- * @rb: link in the corresponding RB-tree
+ * @u.rb: link in the corresponding (free/used) RB-tree
+ * @u.list: link in the protection queue
  * @ec: erase counter
  * @pnum: physical eraseblock number
  *
- * This data structure is used in the WL unit. Each physical eraseblock has a
- * corresponding &struct wl_entry object which may be kept in different
- * RB-trees. See WL unit for details.
+ * This data structure is used in the WL sub-system. Each physical eraseblock
+ * has a corresponding &struct wl_entry object which may be kept in different
+ * RB-trees. See WL sub-system for details.
  */
 struct ubi_wl_entry {
-	struct rb_node rb;
+	union {
+		struct rb_node rb;
+		struct list_head list;
+	} u;
 	int ec;
 	int pnum;
 };
@@ -119,10 +178,10 @@ struct ubi_wl_entry {
  * @mutex: read/write mutex to implement read/write access serialization to
  *         the (@vol_id, @lnum) logical eraseblock
  *
- * This data structure is used in the EBA unit to implement per-LEB locking.
- * When a logical eraseblock is being locked - corresponding
+ * This data structure is used in the EBA sub-system to implement per-LEB
+ * locking. When a logical eraseblock is being locked - corresponding
  * &struct ubi_ltree_entry object is inserted to the lock tree (@ubi->ltree).
- * See EBA unit for details.
+ * See EBA sub-system for details.
  */
 struct ubi_ltree_entry {
 	struct rb_node rb;
@@ -132,9 +191,65 @@ struct ubi_ltree_entry {
 	struct rw_semaphore mutex;
 };
 
+/**
+ * struct ubi_rename_entry - volume re-name description data structure.
+ * @new_name_len: new volume name length
+ * @new_name: new volume name
+ * @remove: if not zero, this volume should be removed, not re-named
+ * @desc: descriptor of the volume
+ * @list: links re-name entries into a list
+ *
+ * This data structure is utilized in the multiple volume re-name code. Namely,
+ * UBI first creates a list of &struct ubi_rename_entry objects from the
+ * &struct ubi_rnvol_req request object, and then utilizes this list to do all
+ * the job.
+ */
+struct ubi_rename_entry {
+	int new_name_len;
+	char new_name[UBI_VOL_NAME_MAX + 1];
+	int remove;
+	struct ubi_volume_desc *desc;
+	struct list_head list;
+};
+
 struct ubi_volume_desc;
 
 /**
+ * struct ubi_fastmap_layout - in-memory fastmap data structure.
+ * @e: PEBs used by the current fastmap
+ * @to_be_tortured: if non-zero tortured this PEB
+ * @used_blocks: number of used PEBs
+ * @max_pool_size: maximal size of the user pool
+ * @max_wl_pool_size: maximal size of the pool used by the WL sub-system
+ */
+struct ubi_fastmap_layout {
+	struct ubi_wl_entry *e[UBI_FM_MAX_BLOCKS];
+	int to_be_tortured[UBI_FM_MAX_BLOCKS];
+	int used_blocks;
+	int max_pool_size;
+	int max_wl_pool_size;
+};
+
+/**
+ * struct ubi_fm_pool - in-memory fastmap pool
+ * @pebs: PEBs in this pool
+ * @used: number of used PEBs
+ * @size: total number of PEBs in this pool
+ * @max_size: maximal size of the pool
+ *
+ * A pool gets filled with up to max_size.
+ * If all PEBs within the pool are used a new fastmap will be written
+ * to the flash and the pool gets refilled with empty PEBs.
+ *
+ */
+struct ubi_fm_pool {
+	int pebs[UBI_FM_MAX_POOL_SIZE];
+	int used;
+	int size;
+	int max_size;
+};
+
+/**
  * struct ubi_volume - UBI volume description data structure.
  * @dev: device object to make use of the the Linux device model
  * @cdev: character device object to create character device
@@ -160,8 +275,6 @@ struct ubi_volume_desc;
  * @upd_ebs: how many eraseblocks are expected to be updated
  * @ch_lnum: LEB number which is being changing by the atomic LEB change
  *           operation
- * @ch_dtype: data persistency type which is being changing by the atomic LEB
- *            change operation
  * @upd_bytes: how many bytes are expected to be received for volume update or
  *             atomic LEB change
  * @upd_received: how many bytes were already received for volume update or
@@ -175,10 +288,7 @@ struct ubi_volume_desc;
  * @upd_marker: %1 if the update marker is set for this volume
  * @updating: %1 if the volume is being updated
  * @changing_leb: %1 if the atomic LEB change ioctl command is in progress
- *
- * @gluebi_desc: gluebi UBI volume descriptor
- * @gluebi_refcount: reference count of the gluebi MTD device
- * @gluebi_mtd: MTD device description object of the gluebi MTD device
+ * @direct_writes: %1 if direct writes are enabled for this volume
  *
  * The @corrupted field indicates that the volume's contents is corrupted.
  * Since UBI protects only static volumes, this field is not relevant to
@@ -202,16 +312,19 @@ struct ubi_volume {
 	int vol_type;
 	int usable_leb_size;
 	int used_ebs;
+#ifndef __UBOOT__
 	int last_eb_bytes;
+#else
+	u32 last_eb_bytes;
+#endif
 	long long used_bytes;
 	int alignment;
 	int data_pad;
 	int name_len;
-	char name[UBI_VOL_NAME_MAX+1];
+	char name[UBI_VOL_NAME_MAX + 1];
 
 	int upd_ebs;
 	int ch_lnum;
-	int ch_dtype;
 	long long upd_bytes;
 	long long upd_received;
 	void *upd_buf;
@@ -222,22 +335,11 @@ struct ubi_volume {
 	unsigned int upd_marker:1;
 	unsigned int updating:1;
 	unsigned int changing_leb:1;
-
-#ifdef CONFIG_MTD_UBI_GLUEBI
-	/*
-	 * Gluebi-related stuff may be compiled out.
-	 * TODO: this should not be built into UBI but should be a separate
-	 * ubimtd driver which works on top of UBI and emulates MTD devices.
-	 */
-	struct ubi_volume_desc *gluebi_desc;
-	int gluebi_refcount;
-	struct mtd_info gluebi_mtd;
-#endif
+	unsigned int direct_writes:1;
 };
 
 /**
- * struct ubi_volume_desc - descriptor of the UBI volume returned when it is
- * opened.
+ * struct ubi_volume_desc - UBI volume descriptor returned when it is opened.
  * @vol: reference to the corresponding volume description object
  * @mode: open mode (%UBI_READONLY, %UBI_READWRITE, or %UBI_EXCLUSIVE)
  */
@@ -249,6 +351,37 @@ struct ubi_volume_desc {
 struct ubi_wl_entry;
 
 /**
+ * struct ubi_debug_info - debugging information for an UBI device.
+ *
+ * @chk_gen: if UBI general extra checks are enabled
+ * @chk_io: if UBI I/O extra checks are enabled
+ * @disable_bgt: disable the background task for testing purposes
+ * @emulate_bitflips: emulate bit-flips for testing purposes
+ * @emulate_io_failures: emulate write/erase failures for testing purposes
+ * @dfs_dir_name: name of debugfs directory containing files of this UBI device
+ * @dfs_dir: direntry object of the UBI device debugfs directory
+ * @dfs_chk_gen: debugfs knob to enable UBI general extra checks
+ * @dfs_chk_io: debugfs knob to enable UBI I/O extra checks
+ * @dfs_disable_bgt: debugfs knob to disable the background task
+ * @dfs_emulate_bitflips: debugfs knob to emulate bit-flips
+ * @dfs_emulate_io_failures: debugfs knob to emulate write/erase failures
+ */
+struct ubi_debug_info {
+	unsigned int chk_gen:1;
+	unsigned int chk_io:1;
+	unsigned int disable_bgt:1;
+	unsigned int emulate_bitflips:1;
+	unsigned int emulate_io_failures:1;
+	char dfs_dir_name[UBI_DFS_DIR_LEN + 1];
+	struct dentry *dfs_dir;
+	struct dentry *dfs_chk_gen;
+	struct dentry *dfs_chk_io;
+	struct dentry *dfs_disable_bgt;
+	struct dentry *dfs_emulate_bitflips;
+	struct dentry *dfs_emulate_io_failures;
+};
+
+/**
  * struct ubi_device - UBI device description structure
  * @dev: UBI device object to use the the Linux device model
  * @cdev: character device object to create character device
@@ -261,6 +394,7 @@ struct ubi_wl_entry;
  *                @vol->readers, @vol->writers, @vol->exclusive,
  *                @vol->ref_count, @vol->mapping and @vol->eba_tbl.
  * @ref_count: count of references on the UBI device
+ * @image_seq: image sequence number recorded on EC headers
  *
  * @rsvd_pebs: count of reserved physical eraseblocks
  * @avail_pebs: count of available physical eraseblocks
@@ -269,12 +403,13 @@ struct ubi_wl_entry;
  * @beb_rsvd_level: normal level of PEBs reserved for bad PEB handling
  *
  * @autoresize_vol_id: ID of the volume which has to be auto-resized at the end
- *                     of UBI ititializetion
+ *                     of UBI initialization
  * @vtbl_slots: how many slots are available in the volume table
  * @vtbl_size: size of the volume table in bytes
  * @vtbl: in-RAM volume table copy
- * @volumes_mutex: protects on-flash volume table and serializes volume
- *                 changes, like creation, deletion, update, resize
+ * @device_mutex: protects on-flash volume table and serializes volume
+ *                creation, deletion, update, re-size, re-name and set
+ *                property
  *
  * @max_ec: current highest erase counter value
  * @mean_ec: current mean erase counter value
@@ -284,20 +419,33 @@ struct ubi_wl_entry;
  * @ltree: the lock tree
  * @alc_mutex: serializes "atomic LEB change" operations
  *
+ * @fm_disabled: non-zero if fastmap is disabled (default)
+ * @fm: in-memory data structure of the currently used fastmap
+ * @fm_pool: in-memory data structure of the fastmap pool
+ * @fm_wl_pool: in-memory data structure of the fastmap pool used by the WL
+ *		sub-system
+ * @fm_mutex: serializes ubi_update_fastmap() and protects @fm_buf
+ * @fm_buf: vmalloc()'d buffer which holds the raw fastmap
+ * @fm_size: fastmap size in bytes
+ * @fm_sem: allows ubi_update_fastmap() to block EBA table changes
+ * @fm_work: fastmap work queue
+ *
  * @used: RB-tree of used physical eraseblocks
+ * @erroneous: RB-tree of erroneous used physical eraseblocks
  * @free: RB-tree of free physical eraseblocks
+ * @free_count: Contains the number of elements in @free
  * @scrub: RB-tree of physical eraseblocks which need scrubbing
- * @prot: protection trees
- * @prot.pnum: protection tree indexed by physical eraseblock numbers
- * @prot.aec: protection tree indexed by absolute erase counter value
- * @wl_lock: protects the @used, @free, @prot, @lookuptbl, @abs_ec, @move_from,
- *           @move_to, @move_to_put @erase_pending, @wl_scheduled, and @works
- *           fields
+ * @pq: protection queue (contain physical eraseblocks which are temporarily
+ *      protected from the wear-leveling worker)
+ * @pq_head: protection queue head
+ * @wl_lock: protects the @used, @free, @pq, @pq_head, @lookuptbl, @move_from,
+ *	     @move_to, @move_to_put @erase_pending, @wl_scheduled, @works,
+ *	     @erroneous, and @erroneous_peb_count fields
  * @move_mutex: serializes eraseblock moves
+ * @work_sem: synchronizes the WL worker with use tasks
  * @wl_scheduled: non-zero if the wear-leveling was scheduled
  * @lookuptbl: a table to quickly find a &struct ubi_wl_entry object for any
  *             physical eraseblock
- * @abs_ec: absolute erase counter
  * @move_from: physical eraseblock from where the data is being moved
  * @move_to: physical eraseblock where the data is being moved to
  * @move_to_put: if the "to" PEB was put
@@ -310,30 +458,38 @@ struct ubi_wl_entry;
  * @flash_size: underlying MTD device size (in bytes)
  * @peb_count: count of physical eraseblocks on the MTD device
  * @peb_size: physical eraseblock size
+ * @bad_peb_limit: top limit of expected bad physical eraseblocks
  * @bad_peb_count: count of bad physical eraseblocks
  * @good_peb_count: count of good physical eraseblocks
+ * @corr_peb_count: count of corrupted physical eraseblocks (preserved and not
+ *                  used by UBI)
+ * @erroneous_peb_count: count of erroneous physical eraseblocks in @erroneous
+ * @max_erroneous: maximum allowed amount of erroneous physical eraseblocks
  * @min_io_size: minimal input/output unit size of the underlying MTD device
  * @hdrs_min_io_size: minimal I/O unit size used for VID and EC headers
  * @ro_mode: if the UBI device is in read-only mode
  * @leb_size: logical eraseblock size
  * @leb_start: starting offset of logical eraseblocks within physical
- * eraseblocks
+ *             eraseblocks
  * @ec_hdr_alsize: size of the EC header aligned to @hdrs_min_io_size
  * @vid_hdr_alsize: size of the VID header aligned to @hdrs_min_io_size
  * @vid_hdr_offset: starting offset of the volume identifier header (might be
- * unaligned)
+ *                  unaligned)
  * @vid_hdr_aloffset: starting offset of the VID header aligned to
  * @hdrs_min_io_size
  * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset
  * @bad_allowed: whether the MTD device admits of bad physical eraseblocks or
  *               not
+ * @nor_flash: non-zero if working on top of NOR flash
+ * @max_write_size: maximum amount of bytes the underlying flash can write at a
+ *                  time (MTD write buffer size)
  * @mtd: MTD device descriptor
  *
- * @peb_buf1: a buffer of PEB size used for different purposes
- * @peb_buf2: another buffer of PEB size used for different purposes
- * @buf_mutex: proptects @peb_buf1 and @peb_buf2
- * @dbg_peb_buf: buffer of PEB size used for debugging
- * @dbg_buf_mutex: proptects @dbg_peb_buf
+ * @peb_buf: a buffer of PEB size used for different purposes
+ * @buf_mutex: protects @peb_buf
+ * @ckvol_mutex: serializes static volume checking when opening
+ *
+ * @dbg: debugging information for this UBI device
  */
 struct ubi_device {
 	struct cdev cdev;
@@ -344,42 +500,56 @@ struct ubi_device {
 	struct ubi_volume *volumes[UBI_MAX_VOLUMES+UBI_INT_VOL_COUNT];
 	spinlock_t volumes_lock;
 	int ref_count;
+	int image_seq;
 
 	int rsvd_pebs;
 	int avail_pebs;
 	int beb_rsvd_pebs;
 	int beb_rsvd_level;
+	int bad_peb_limit;
 
 	int autoresize_vol_id;
 	int vtbl_slots;
 	int vtbl_size;
 	struct ubi_vtbl_record *vtbl;
-	struct mutex volumes_mutex;
+	struct mutex device_mutex;
 
 	int max_ec;
-	/* TODO: mean_ec is not updated run-time, fix */
+	/* Note, mean_ec is not updated run-time - should be fixed */
 	int mean_ec;
 
-	/* EBA unit's stuff */
+	/* EBA sub-system's stuff */
 	unsigned long long global_sqnum;
 	spinlock_t ltree_lock;
 	struct rb_root ltree;
 	struct mutex alc_mutex;
 
-	/* Wear-leveling unit's stuff */
+	/* Fastmap stuff */
+	int fm_disabled;
+	struct ubi_fastmap_layout *fm;
+	struct ubi_fm_pool fm_pool;
+	struct ubi_fm_pool fm_wl_pool;
+	struct rw_semaphore fm_sem;
+	struct mutex fm_mutex;
+	void *fm_buf;
+	size_t fm_size;
+#ifndef __UBOOT__
+	struct work_struct fm_work;
+#endif
+
+	/* Wear-leveling sub-system's stuff */
 	struct rb_root used;
+	struct rb_root erroneous;
 	struct rb_root free;
+	int free_count;
 	struct rb_root scrub;
-	struct {
-		struct rb_root pnum;
-		struct rb_root aec;
-	} prot;
+	struct list_head pq[UBI_PROT_QUEUE_LEN];
+	int pq_head;
 	spinlock_t wl_lock;
 	struct mutex move_mutex;
 	struct rw_semaphore work_sem;
 	int wl_scheduled;
 	struct ubi_wl_entry **lookuptbl;
-	unsigned long long abs_ec;
 	struct ubi_wl_entry *move_from;
 	struct ubi_wl_entry *move_to;
 	int move_to_put;
@@ -389,12 +559,15 @@ struct ubi_device {
 	int thread_enabled;
 	char bgt_name[sizeof(UBI_BGT_NAME_PATTERN)+2];
 
-	/* I/O unit's stuff */
+	/* I/O sub-system's stuff */
 	long long flash_size;
 	int peb_count;
 	int peb_size;
 	int bad_peb_count;
 	int good_peb_count;
+	int corr_peb_count;
+	int erroneous_peb_count;
+	int max_erroneous;
 	int min_io_size;
 	int hdrs_min_io_size;
 	int ro_mode;
@@ -405,35 +578,195 @@ struct ubi_device {
 	int vid_hdr_offset;
 	int vid_hdr_aloffset;
 	int vid_hdr_shift;
-	int bad_allowed;
+	unsigned int bad_allowed:1;
+	unsigned int nor_flash:1;
+	int max_write_size;
 	struct mtd_info *mtd;
 
-	void *peb_buf1;
-	void *peb_buf2;
+	void *peb_buf;
 	struct mutex buf_mutex;
 	struct mutex ckvol_mutex;
-#ifdef CONFIG_MTD_UBI_DEBUG
-	void *dbg_peb_buf;
-	struct mutex dbg_buf_mutex;
-#endif
+
+	struct ubi_debug_info dbg;
+};
+
+/**
+ * struct ubi_ainf_peb - attach information about a physical eraseblock.
+ * @ec: erase counter (%UBI_UNKNOWN if it is unknown)
+ * @pnum: physical eraseblock number
+ * @vol_id: ID of the volume this LEB belongs to
+ * @lnum: logical eraseblock number
+ * @scrub: if this physical eraseblock needs scrubbing
+ * @copy_flag: this LEB is a copy (@copy_flag is set in VID header of this LEB)
+ * @sqnum: sequence number
+ * @u: unions RB-tree or @list links
+ * @u.rb: link in the per-volume RB-tree of &struct ubi_ainf_peb objects
+ * @u.list: link in one of the eraseblock lists
+ *
+ * One object of this type is allocated for each physical eraseblock when
+ * attaching an MTD device. Note, if this PEB does not belong to any LEB /
+ * volume, the @vol_id and @lnum fields are initialized to %UBI_UNKNOWN.
+ */
+struct ubi_ainf_peb {
+	int ec;
+	int pnum;
+	int vol_id;
+	int lnum;
+	unsigned int scrub:1;
+	unsigned int copy_flag:1;
+	unsigned long long sqnum;
+	union {
+		struct rb_node rb;
+		struct list_head list;
+	} u;
+};
+
+/**
+ * struct ubi_ainf_volume - attaching information about a volume.
+ * @vol_id: volume ID
+ * @highest_lnum: highest logical eraseblock number in this volume
+ * @leb_count: number of logical eraseblocks in this volume
+ * @vol_type: volume type
+ * @used_ebs: number of used logical eraseblocks in this volume (only for
+ *            static volumes)
+ * @last_data_size: amount of data in the last logical eraseblock of this
+ *                  volume (always equivalent to the usable logical eraseblock
+ *                  size in case of dynamic volumes)
+ * @data_pad: how many bytes at the end of logical eraseblocks of this volume
+ *            are not used (due to volume alignment)
+ * @compat: compatibility flags of this volume
+ * @rb: link in the volume RB-tree
+ * @root: root of the RB-tree containing all the eraseblock belonging to this
+ *        volume (&struct ubi_ainf_peb objects)
+ *
+ * One object of this type is allocated for each volume when attaching an MTD
+ * device.
+ */
+struct ubi_ainf_volume {
+	int vol_id;
+	int highest_lnum;
+	int leb_count;
+	int vol_type;
+	int used_ebs;
+	int last_data_size;
+	int data_pad;
+	int compat;
+	struct rb_node rb;
+	struct rb_root root;
+};
+
+/**
+ * struct ubi_attach_info - MTD device attaching information.
+ * @volumes: root of the volume RB-tree
+ * @corr: list of corrupted physical eraseblocks
+ * @free: list of free physical eraseblocks
+ * @erase: list of physical eraseblocks which have to be erased
+ * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
+ *         those belonging to "preserve"-compatible internal volumes)
+ * @corr_peb_count: count of PEBs in the @corr list
+ * @empty_peb_count: count of PEBs which are presumably empty (contain only
+ *                   0xFF bytes)
+ * @alien_peb_count: count of PEBs in the @alien list
+ * @bad_peb_count: count of bad physical eraseblocks
+ * @maybe_bad_peb_count: count of bad physical eraseblocks which are not marked
+ *                       as bad yet, but which look like bad
+ * @vols_found: number of volumes found
+ * @highest_vol_id: highest volume ID
+ * @is_empty: flag indicating whether the MTD device is empty or not
+ * @min_ec: lowest erase counter value
+ * @max_ec: highest erase counter value
+ * @max_sqnum: highest sequence number value
+ * @mean_ec: mean erase counter value
+ * @ec_sum: a temporary variable used when calculating @mean_ec
+ * @ec_count: a temporary variable used when calculating @mean_ec
+ * @aeb_slab_cache: slab cache for &struct ubi_ainf_peb objects
+ *
+ * This data structure contains the result of attaching an MTD device and may
+ * be used by other UBI sub-systems to build final UBI data structures, further
+ * error-recovery and so on.
+ */
+struct ubi_attach_info {
+	struct rb_root volumes;
+	struct list_head corr;
+	struct list_head free;
+	struct list_head erase;
+	struct list_head alien;
+	int corr_peb_count;
+	int empty_peb_count;
+	int alien_peb_count;
+	int bad_peb_count;
+	int maybe_bad_peb_count;
+	int vols_found;
+	int highest_vol_id;
+	int is_empty;
+	int min_ec;
+	int max_ec;
+	unsigned long long max_sqnum;
+	int mean_ec;
+	uint64_t ec_sum;
+	int ec_count;
+	struct kmem_cache *aeb_slab_cache;
+};
+
+/**
+ * struct ubi_work - UBI work description data structure.
+ * @list: a link in the list of pending works
+ * @func: worker function
+ * @e: physical eraseblock to erase
+ * @vol_id: the volume ID on which this erasure is being performed
+ * @lnum: the logical eraseblock number
+ * @torture: if the physical eraseblock has to be tortured
+ * @anchor: produce a anchor PEB to by used by fastmap
+ *
+ * The @func pointer points to the worker function. If the @cancel argument is
+ * not zero, the worker has to free the resources and exit immediately. The
+ * worker has to return zero in case of success and a negative error code in
+ * case of failure.
+ */
+struct ubi_work {
+	struct list_head list;
+	int (*func)(struct ubi_device *ubi, struct ubi_work *wrk, int cancel);
+	/* The below fields are only relevant to erasure works */
+	struct ubi_wl_entry *e;
+	int vol_id;
+	int lnum;
+	int torture;
+	int anchor;
 };
 
+#include "debug.h"
+
 extern struct kmem_cache *ubi_wl_entry_slab;
-extern struct file_operations ubi_ctrl_cdev_operations;
-extern struct file_operations ubi_cdev_operations;
-extern struct file_operations ubi_vol_cdev_operations;
+extern const struct file_operations ubi_ctrl_cdev_operations;
+extern const struct file_operations ubi_cdev_operations;
+extern const struct file_operations ubi_vol_cdev_operations;
 extern struct class *ubi_class;
 extern struct mutex ubi_devices_mutex;
+extern struct blocking_notifier_head ubi_notifiers;
+
+/* attach.c */
+int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
+		  int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips);
+struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai,
+				    int vol_id);
+void ubi_remove_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av);
+struct ubi_ainf_peb *ubi_early_get_peb(struct ubi_device *ubi,
+				       struct ubi_attach_info *ai);
+int ubi_attach(struct ubi_device *ubi, int force_scan);
+void ubi_destroy_ai(struct ubi_attach_info *ai);
 
 /* vtbl.c */
 int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
 			   struct ubi_vtbl_record *vtbl_rec);
-int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si);
+int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
+			    struct list_head *rename_list);
+int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_attach_info *ai);
 
 /* vmt.c */
 int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req);
-int ubi_remove_volume(struct ubi_volume_desc *desc);
+int ubi_remove_volume(struct ubi_volume_desc *desc, int no_vtbl);
 int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs);
+int ubi_rename_volumes(struct ubi_device *ubi, struct list_head *rename_list);
 int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol);
 void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol);
 
@@ -448,25 +781,12 @@ int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
 			     const void __user *buf, int count);
 
 /* misc.c */
-int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf, int length);
+int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf,
+		      int length);
 int ubi_check_volume(struct ubi_device *ubi, int vol_id);
+void ubi_update_reserved(struct ubi_device *ubi);
 void ubi_calculate_reserved(struct ubi_device *ubi);
-
-/* gluebi.c */
-#ifdef CONFIG_MTD_UBI_GLUEBI
-int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol);
-int ubi_destroy_gluebi(struct ubi_volume *vol);
-void ubi_gluebi_updated(struct ubi_volume *vol);
-#else
-#define ubi_create_gluebi(ubi, vol) 0
-
-static inline int ubi_destroy_gluebi(struct ubi_volume *vol)
-{
-	return 0;
-}
-
-#define ubi_gluebi_updated(vol)
-#endif
+int ubi_check_pattern(const void *buf, uint8_t patt, int size);
 
 /* eba.c */
 int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
@@ -474,25 +794,33 @@ int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
 int ubi_eba_read_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 		     void *buf, int offset, int len, int check);
 int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
-		      const void *buf, int offset, int len, int dtype);
+		      const void *buf, int offset, int len);
 int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
-			 int lnum, const void *buf, int len, int dtype,
-			 int used_ebs);
+			 int lnum, const void *buf, int len, int used_ebs);
 int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
-			      int lnum, const void *buf, int len, int dtype);
+			      int lnum, const void *buf, int len);
 int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 		     struct ubi_vid_hdr *vid_hdr);
-int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si);
-void ubi_eba_close(const struct ubi_device *ubi);
+int ubi_eba_init(struct ubi_device *ubi, struct ubi_attach_info *ai);
+unsigned long long ubi_next_sqnum(struct ubi_device *ubi);
+int self_check_eba(struct ubi_device *ubi, struct ubi_attach_info *ai_fastmap,
+		   struct ubi_attach_info *ai_scan);
 
 /* wl.c */
-int ubi_wl_get_peb(struct ubi_device *ubi, int dtype);
-int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture);
-int ubi_wl_flush(struct ubi_device *ubi);
+int ubi_wl_get_peb(struct ubi_device *ubi);
+int ubi_wl_put_peb(struct ubi_device *ubi, int vol_id, int lnum,
+		   int pnum, int torture);
+int ubi_wl_flush(struct ubi_device *ubi, int vol_id, int lnum);
 int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum);
-int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si);
+int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai);
 void ubi_wl_close(struct ubi_device *ubi);
 int ubi_thread(void *u);
+struct ubi_wl_entry *ubi_wl_get_fm_peb(struct ubi_device *ubi, int anchor);
+int ubi_wl_put_fm_peb(struct ubi_device *ubi, struct ubi_wl_entry *used_e,
+		      int lnum, int torture);
+int ubi_is_erase_work(struct ubi_work *wrk);
+void ubi_refill_pools(struct ubi_device *ubi);
+int ubi_ensure_anchor_pebs(struct ubi_device *ubi);
 
 /* io.c */
 int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset,
@@ -512,16 +840,37 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum,
 			 struct ubi_vid_hdr *vid_hdr);
 
 /* build.c */
-int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset);
+int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
+		       int vid_hdr_offset, int max_beb_per1024);
 int ubi_detach_mtd_dev(int ubi_num, int anyway);
 struct ubi_device *ubi_get_device(int ubi_num);
 void ubi_put_device(struct ubi_device *ubi);
 struct ubi_device *ubi_get_by_major(int major);
 int ubi_major2num(int major);
+int ubi_volume_notify(struct ubi_device *ubi, struct ubi_volume *vol,
+		      int ntype);
+int ubi_notify_all(struct ubi_device *ubi, int ntype,
+		   struct notifier_block *nb);
+int ubi_enumerate_volumes(struct notifier_block *nb);
+void ubi_free_internal_volumes(struct ubi_device *ubi);
+
+/* kapi.c */
+void ubi_do_get_device_info(struct ubi_device *ubi, struct ubi_device_info *di);
+void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol,
+			    struct ubi_volume_info *vi);
+/* scan.c */
+int ubi_compare_lebs(struct ubi_device *ubi, const struct ubi_ainf_peb *aeb,
+		      int pnum, const struct ubi_vid_hdr *vid_hdr);
+
+/* fastmap.c */
+size_t ubi_calc_fm_size(struct ubi_device *ubi);
+int ubi_update_fastmap(struct ubi_device *ubi);
+int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		     int fm_anchor);
 
 /*
  * ubi_rb_for_each_entry - walk an RB-tree.
- * @rb: a pointer to type 'struct rb_node' to to use as a loop counter
+ * @rb: a pointer to type 'struct rb_node' to use as a loop counter
  * @pos: a pointer to RB-tree entry type to use as a loop counter
  * @root: RB-tree's root
  * @member: the name of the 'struct rb_node' within the RB-tree entry
@@ -530,7 +879,23 @@ int ubi_major2num(int major);
 	for (rb = rb_first(root),                                            \
 	     pos = (rb ? container_of(rb, typeof(*pos), member) : NULL);     \
 	     rb;                                                             \
-	     rb = rb_next(rb), pos = container_of(rb, typeof(*pos), member))
+	     rb = rb_next(rb),                                               \
+	     pos = (rb ? container_of(rb, typeof(*pos), member) : NULL))
+
+/*
+ * ubi_move_aeb_to_list - move a PEB from the volume tree to a list.
+ *
+ * @av: volume attaching information
+ * @aeb: attaching eraseblock information
+ * @list: the list to move to
+ */
+static inline void ubi_move_aeb_to_list(struct ubi_ainf_volume *av,
+					 struct ubi_ainf_peb *aeb,
+					 struct list_head *list)
+{
+		rb_erase(&aeb->u.rb, &av->root);
+		list_add_tail(&aeb->u.list, list);
+}
 
 /**
  * ubi_zalloc_vid_hdr - allocate a volume identifier header object.
@@ -606,6 +971,7 @@ static inline void ubi_ro_mode(struct ubi_device *ubi)
 	if (!ubi->ro_mode) {
 		ubi->ro_mode = 1;
 		ubi_warn("switch to read-only mode");
+		dump_stack();
 	}
 }
 
diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
index e597f82..220c120 100644
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -26,13 +26,16 @@
  * transaction with a roll-back capability.
  */
 
-#ifdef UBI_LINUX
-#include <linux/err.h>
-#include <asm/uaccess.h>
-#include <asm/div64.h>
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/uaccess.h>
+#else
+#include <div64.h>
+#include <ubi_uboot.h>
 #endif
+#include <linux/err.h>
+#include <linux/math64.h>
 
-#include <ubi_uboot.h>
 #include "ubi.h"
 
 /**
@@ -48,22 +51,21 @@ static int set_update_marker(struct ubi_device *ubi, struct ubi_volume *vol)
 	int err;
 	struct ubi_vtbl_record vtbl_rec;
 
-	dbg_msg("set update marker for volume %d", vol->vol_id);
+	dbg_gen("set update marker for volume %d", vol->vol_id);
 
 	if (vol->upd_marker) {
 		ubi_assert(ubi->vtbl[vol->vol_id].upd_marker);
-		dbg_msg("already set");
+		dbg_gen("already set");
 		return 0;
 	}
 
-	memcpy(&vtbl_rec, &ubi->vtbl[vol->vol_id],
-	       sizeof(struct ubi_vtbl_record));
+	vtbl_rec = ubi->vtbl[vol->vol_id];
 	vtbl_rec.upd_marker = 1;
 
-	mutex_lock(&ubi->volumes_mutex);
+	mutex_lock(&ubi->device_mutex);
 	err = ubi_change_vtbl_record(ubi, vol->vol_id, &vtbl_rec);
-	mutex_unlock(&ubi->volumes_mutex);
 	vol->upd_marker = 1;
+	mutex_unlock(&ubi->device_mutex);
 	return err;
 }
 
@@ -81,31 +83,29 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol,
 			       long long bytes)
 {
 	int err;
-	uint64_t tmp;
 	struct ubi_vtbl_record vtbl_rec;
 
-	dbg_msg("clear update marker for volume %d", vol->vol_id);
+	dbg_gen("clear update marker for volume %d", vol->vol_id);
 
-	memcpy(&vtbl_rec, &ubi->vtbl[vol->vol_id],
-	       sizeof(struct ubi_vtbl_record));
+	vtbl_rec = ubi->vtbl[vol->vol_id];
 	ubi_assert(vol->upd_marker && vtbl_rec.upd_marker);
 	vtbl_rec.upd_marker = 0;
 
 	if (vol->vol_type == UBI_STATIC_VOLUME) {
 		vol->corrupted = 0;
-		vol->used_bytes = tmp = bytes;
-		vol->last_eb_bytes = do_div(tmp, vol->usable_leb_size);
-		vol->used_ebs = tmp;
+		vol->used_bytes = bytes;
+		vol->used_ebs = div_u64_rem(bytes, vol->usable_leb_size,
+					    &vol->last_eb_bytes);
 		if (vol->last_eb_bytes)
 			vol->used_ebs += 1;
 		else
 			vol->last_eb_bytes = vol->usable_leb_size;
 	}
 
-	mutex_lock(&ubi->volumes_mutex);
+	mutex_lock(&ubi->device_mutex);
 	err = ubi_change_vtbl_record(ubi, vol->vol_id, &vtbl_rec);
-	mutex_unlock(&ubi->volumes_mutex);
 	vol->upd_marker = 0;
+	mutex_unlock(&ubi->device_mutex);
 	return err;
 }
 
@@ -123,9 +123,8 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
 		     long long bytes)
 {
 	int i, err;
-	uint64_t tmp;
 
-	dbg_msg("start update of volume %d, %llu bytes", vol->vol_id, bytes);
+	dbg_gen("start update of volume %d, %llu bytes", vol->vol_id, bytes);
 	ubi_assert(!vol->updating && !vol->changing_leb);
 	vol->updating = 1;
 
@@ -141,21 +140,23 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
 	}
 
 	if (bytes == 0) {
+		err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
+		if (err)
+			return err;
+
 		err = clear_update_marker(ubi, vol, 0);
 		if (err)
 			return err;
-		err = ubi_wl_flush(ubi);
-		if (!err)
-			vol->updating = 0;
+		vol->updating = 0;
+		return 0;
 	}
 
 	vol->upd_buf = vmalloc(ubi->leb_size);
 	if (!vol->upd_buf)
 		return -ENOMEM;
 
-	tmp = bytes;
-	vol->upd_ebs = !!do_div(tmp, vol->usable_leb_size);
-	vol->upd_ebs += tmp;
+	vol->upd_ebs = div_u64(bytes + vol->usable_leb_size - 1,
+			       vol->usable_leb_size);
 	vol->upd_bytes = bytes;
 	vol->upd_received = 0;
 	return 0;
@@ -175,17 +176,15 @@ int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 {
 	ubi_assert(!vol->updating && !vol->changing_leb);
 
-	dbg_msg("start changing LEB %d:%d, %u bytes",
+	dbg_gen("start changing LEB %d:%d, %u bytes",
 		vol->vol_id, req->lnum, req->bytes);
 	if (req->bytes == 0)
-		return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0,
-						 req->dtype);
+		return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0);
 
 	vol->upd_bytes = req->bytes;
 	vol->upd_received = 0;
 	vol->changing_leb = 1;
 	vol->ch_lnum = req->lnum;
-	vol->ch_dtype = req->dtype;
 
 	vol->upd_buf = vmalloc(req->bytes);
 	if (!vol->upd_buf)
@@ -234,11 +233,11 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 		memset(buf + len, 0xFF, l - len);
 		len = ubi_calc_data_len(ubi, buf, l);
 		if (len == 0) {
-			dbg_msg("all %d bytes contain 0xFF - skip", len);
+			dbg_gen("all %d bytes contain 0xFF - skip", len);
 			return 0;
 		}
 
-		err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len, UBI_UNKNOWN);
+		err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len);
 	} else {
 		/*
 		 * When writing static volume, and this is the last logical
@@ -250,8 +249,7 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 		 * contain zeros, not random trash.
 		 */
 		memset(buf + len, 0, vol->usable_leb_size - len);
-		err = ubi_eba_write_leb_st(ubi, vol, lnum, buf, len,
-					   UBI_UNKNOWN, used_ebs);
+		err = ubi_eba_write_leb_st(ubi, vol, lnum, buf, len, used_ebs);
 	}
 
 	return err;
@@ -259,6 +257,7 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 
 /**
  * ubi_more_update_data - write more update data.
+ * @ubi: UBI device description object
  * @vol: volume description object
  * @buf: write data (user-space memory buffer)
  * @count: how much bytes to write
@@ -272,19 +271,20 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
 			 const void __user *buf, int count)
 {
-	uint64_t tmp;
+#ifndef __UBOOT__
 	int lnum, offs, err = 0, len, to_write = count;
+#else
+	int lnum, err = 0, len, to_write = count;
+	u32 offs;
+#endif
 
-	dbg_msg("write %d of %lld bytes, %lld already passed",
+	dbg_gen("write %d of %lld bytes, %lld already passed",
 		count, vol->upd_bytes, vol->upd_received);
 
 	if (ubi->ro_mode)
 		return -EROFS;
 
-	tmp = vol->upd_received;
-	offs = do_div(tmp, vol->usable_leb_size);
-	lnum = tmp;
-
+	lnum = div_u64_rem(vol->upd_received,  vol->usable_leb_size, &offs);
 	if (vol->upd_received + count > vol->upd_bytes)
 		to_write = count = vol->upd_bytes - vol->upd_received;
 
@@ -359,16 +359,16 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
 
 	ubi_assert(vol->upd_received <= vol->upd_bytes);
 	if (vol->upd_received == vol->upd_bytes) {
+		err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
+		if (err)
+			return err;
 		/* The update is finished, clear the update marker */
 		err = clear_update_marker(ubi, vol, vol->upd_bytes);
 		if (err)
 			return err;
-		err = ubi_wl_flush(ubi);
-		if (err == 0) {
-			vol->updating = 0;
-			err = to_write;
-			vfree(vol->upd_buf);
-		}
+		vol->updating = 0;
+		err = to_write;
+		vfree(vol->upd_buf);
 	}
 
 	return err;
@@ -376,6 +376,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
 
 /**
  * ubi_more_leb_change_data - accept more data for atomic LEB change.
+ * @ubi: UBI device description object
  * @vol: volume description object
  * @buf: write data (user-space memory buffer)
  * @count: how much bytes to write
@@ -392,7 +393,7 @@ int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
 {
 	int err;
 
-	dbg_msg("write %d of %lld bytes, %lld already passed",
+	dbg_gen("write %d of %lld bytes, %lld already passed",
 		count, vol->upd_bytes, vol->upd_received);
 
 	if (ubi->ro_mode)
@@ -410,10 +411,11 @@ int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
 	if (vol->upd_received == vol->upd_bytes) {
 		int len = ALIGN((int)vol->upd_bytes, ubi->min_io_size);
 
-		memset(vol->upd_buf + vol->upd_bytes, 0xFF, len - vol->upd_bytes);
+		memset(vol->upd_buf + vol->upd_bytes, 0xFF,
+		       len - vol->upd_bytes);
 		len = ubi_calc_data_len(ubi, vol->upd_buf, len);
 		err = ubi_eba_atomic_leb_change(ubi, vol, vol->ch_lnum,
-						vol->upd_buf, len, UBI_UNKNOWN);
+						vol->upd_buf, len);
 		if (err)
 			return err;
 	}
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index c4e894b..d9665a4 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -11,21 +11,22 @@
  * resizing.
  */
 
-#ifdef UBI_LINUX
+#define __UBOOT__
+#ifndef __UBOOT__
 #include <linux/err.h>
-#include <asm/div64.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#else
+#include <div64.h>
+#include <ubi_uboot.h>
 #endif
+#include <linux/math64.h>
 
-#include <ubi_uboot.h>
 #include "ubi.h"
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-static void paranoid_check_volumes(struct ubi_device *ubi);
-#else
-#define paranoid_check_volumes(ubi)
-#endif
+static int self_check_volumes(struct ubi_device *ubi);
 
-#ifdef UBI_LINUX
+#ifndef __UBOOT__
 static ssize_t vol_attribute_show(struct device *dev,
 				  struct device_attribute *attr, char *buf);
 
@@ -121,10 +122,11 @@ static void vol_release(struct device *dev)
 {
 	struct ubi_volume *vol = container_of(dev, struct ubi_volume, dev);
 
+	kfree(vol->eba_tbl);
 	kfree(vol);
 }
 
-#ifdef UBI_LINUX
+#ifndef __UBOOT__
 /**
  * volume_sysfs_init - initialize sysfs for new volume.
  * @ubi: UBI device description object
@@ -193,14 +195,13 @@ static void volume_sysfs_close(struct ubi_volume *vol)
  * %UBI_VOL_NUM_AUTO, this function automatically assign ID to the new volume
  * and saves it in @req->vol_id. Returns zero in case of success and a negative
  * error code in case of failure. Note, the caller has to have the
- * @ubi->volumes_mutex locked.
+ * @ubi->device_mutex locked.
  */
 int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 {
-	int i, err, vol_id = req->vol_id, dont_free = 0;
+	int i, err, vol_id = req->vol_id, do_free = 1;
 	struct ubi_volume *vol;
 	struct ubi_vtbl_record vtbl_rec;
-	uint64_t bytes;
 	dev_t dev;
 
 	if (ubi->ro_mode)
@@ -213,7 +214,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	spin_lock(&ubi->volumes_lock);
 	if (vol_id == UBI_VOL_NUM_AUTO) {
 		/* Find unused volume ID */
-		dbg_msg("search for vacant volume ID");
+		dbg_gen("search for vacant volume ID");
 		for (i = 0; i < ubi->vtbl_slots; i++)
 			if (!ubi->volumes[i]) {
 				vol_id = i;
@@ -221,21 +222,21 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 			}
 
 		if (vol_id == UBI_VOL_NUM_AUTO) {
-			dbg_err("out of volume IDs");
+			ubi_err("out of volume IDs");
 			err = -ENFILE;
 			goto out_unlock;
 		}
 		req->vol_id = vol_id;
 	}
 
-	dbg_msg("volume ID %d, %llu bytes, type %d, name %s",
-		vol_id, (unsigned long long)req->bytes,
+	dbg_gen("create device %d, volume %d, %llu bytes, type %d, name %s",
+		ubi->ubi_num, vol_id, (unsigned long long)req->bytes,
 		(int)req->vol_type, req->name);
 
 	/* Ensure that this volume does not exist */
 	err = -EEXIST;
 	if (ubi->volumes[vol_id]) {
-		dbg_err("volume %d already exists", vol_id);
+		ubi_err("volume %d already exists", vol_id);
 		goto out_unlock;
 	}
 
@@ -244,20 +245,21 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 		if (ubi->volumes[i] &&
 		    ubi->volumes[i]->name_len == req->name_len &&
 		    !strcmp(ubi->volumes[i]->name, req->name)) {
-			dbg_err("volume \"%s\" exists (ID %d)", req->name, i);
+			ubi_err("volume \"%s\" exists (ID %d)", req->name, i);
 			goto out_unlock;
 		}
 
 	/* Calculate how many eraseblocks are requested */
 	vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment;
-	bytes = req->bytes;
-	if (do_div(bytes, vol->usable_leb_size))
-		vol->reserved_pebs = 1;
-	vol->reserved_pebs += bytes;
+	vol->reserved_pebs += div_u64(req->bytes + vol->usable_leb_size - 1,
+				      vol->usable_leb_size);
 
 	/* Reserve physical eraseblocks */
 	if (vol->reserved_pebs > ubi->avail_pebs) {
-		dbg_err("not enough PEBs, only %d available", ubi->avail_pebs);
+		ubi_err("not enough PEBs, only %d available", ubi->avail_pebs);
+		if (ubi->corr_peb_count)
+			ubi_err("%d PEBs are corrupted and not used",
+				ubi->corr_peb_count);
 		err = -ENOSPC;
 		goto out_unlock;
 	}
@@ -270,14 +272,14 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	vol->data_pad  = ubi->leb_size % vol->alignment;
 	vol->vol_type  = req->vol_type;
 	vol->name_len  = req->name_len;
-	memcpy(vol->name, req->name, vol->name_len + 1);
+	memcpy(vol->name, req->name, vol->name_len);
 	vol->ubi = ubi;
 
 	/*
 	 * Finish all pending erases because there may be some LEBs belonging
 	 * to the same volume ID.
 	 */
-	err = ubi_wl_flush(ubi);
+	err = ubi_wl_flush(ubi, vol_id, UBI_ALL);
 	if (err)
 		goto out_acc;
 
@@ -296,10 +298,10 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 		vol->used_bytes =
 			(long long)vol->used_ebs * vol->usable_leb_size;
 	} else {
-		bytes = vol->used_bytes;
-		vol->last_eb_bytes = do_div(bytes, vol->usable_leb_size);
-		vol->used_ebs = bytes;
-		if (vol->last_eb_bytes)
+		vol->used_ebs = div_u64_rem(vol->used_bytes,
+					    vol->usable_leb_size,
+					    &vol->last_eb_bytes);
+		if (vol->last_eb_bytes != 0)
 			vol->used_ebs += 1;
 		else
 			vol->last_eb_bytes = vol->usable_leb_size;
@@ -315,20 +317,16 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 		goto out_mapping;
 	}
 
-	err = ubi_create_gluebi(ubi, vol);
-	if (err)
-		goto out_cdev;
-
 	vol->dev.release = vol_release;
 	vol->dev.parent = &ubi->dev;
 	vol->dev.devt = dev;
 	vol->dev.class = ubi_class;
 
-	sprintf(&vol->dev.bus_id[0], "%s_%d", ubi->ubi_name, vol->vol_id);
+	dev_set_name(&vol->dev, "%s_%d", ubi->ubi_name, vol->vol_id);
 	err = device_register(&vol->dev);
 	if (err) {
 		ubi_err("cannot register device");
-		goto out_gluebi;
+		goto out_cdev;
 	}
 
 	err = volume_sysfs_init(ubi, vol);
@@ -345,7 +343,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 		vtbl_rec.vol_type = UBI_VID_DYNAMIC;
 	else
 		vtbl_rec.vol_type = UBI_VID_STATIC;
-	memcpy(vtbl_rec.name, vol->name, vol->name_len + 1);
+	memcpy(vtbl_rec.name, vol->name, vol->name_len);
 
 	err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
 	if (err)
@@ -356,39 +354,37 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	ubi->vol_count += 1;
 	spin_unlock(&ubi->volumes_lock);
 
-	paranoid_check_volumes(ubi);
-	return 0;
+	ubi_volume_notify(ubi, vol, UBI_VOLUME_ADDED);
+	self_check_volumes(ubi);
+	return err;
 
 out_sysfs:
 	/*
-	 * We have registered our device, we should not free the volume*
+	 * We have registered our device, we should not free the volume
 	 * description object in this function in case of an error - it is
 	 * freed by the release function.
 	 *
 	 * Get device reference to prevent the release function from being
 	 * called just after sysfs has been closed.
 	 */
-	dont_free = 1;
+	do_free = 0;
 	get_device(&vol->dev);
 	volume_sysfs_close(vol);
-out_gluebi:
-	if (ubi_destroy_gluebi(vol))
-		dbg_err("cannot destroy gluebi for volume %d:%d",
-			ubi->ubi_num, vol_id);
 out_cdev:
 	cdev_del(&vol->cdev);
 out_mapping:
-	kfree(vol->eba_tbl);
+	if (do_free)
+		kfree(vol->eba_tbl);
 out_acc:
 	spin_lock(&ubi->volumes_lock);
 	ubi->rsvd_pebs -= vol->reserved_pebs;
 	ubi->avail_pebs += vol->reserved_pebs;
 out_unlock:
 	spin_unlock(&ubi->volumes_lock);
-	if (dont_free)
-		put_device(&vol->dev);
-	else
+	if (do_free)
 		kfree(vol);
+	else
+		put_device(&vol->dev);
 	ubi_err("cannot create volume %d, error %d", vol_id, err);
 	return err;
 }
@@ -396,19 +392,20 @@ out_unlock:
 /**
  * ubi_remove_volume - remove volume.
  * @desc: volume descriptor
+ * @no_vtbl: do not change volume table if not zero
  *
  * This function removes volume described by @desc. The volume has to be opened
  * in "exclusive" mode. Returns zero in case of success and a negative error
- * code in case of failure. The caller has to have the @ubi->volumes_mutex
+ * code in case of failure. The caller has to have the @ubi->device_mutex
  * locked.
  */
-int ubi_remove_volume(struct ubi_volume_desc *desc)
+int ubi_remove_volume(struct ubi_volume_desc *desc, int no_vtbl)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
 	int i, err, vol_id = vol->vol_id, reserved_pebs = vol->reserved_pebs;
 
-	dbg_msg("remove UBI volume %d", vol_id);
+	dbg_gen("remove device %d, volume %d", ubi->ubi_num, vol_id);
 	ubi_assert(desc->mode == UBI_EXCLUSIVE);
 	ubi_assert(vol == ubi->volumes[vol_id]);
 
@@ -427,13 +424,11 @@ int ubi_remove_volume(struct ubi_volume_desc *desc)
 	ubi->volumes[vol_id] = NULL;
 	spin_unlock(&ubi->volumes_lock);
 
-	err = ubi_destroy_gluebi(vol);
-	if (err)
-		goto out_err;
-
-	err = ubi_change_vtbl_record(ubi, vol_id, NULL);
-	if (err)
-		goto out_err;
+	if (!no_vtbl) {
+		err = ubi_change_vtbl_record(ubi, vol_id, NULL);
+		if (err)
+			goto out_err;
+	}
 
 	for (i = 0; i < vol->reserved_pebs; i++) {
 		err = ubi_eba_unmap_leb(ubi, vol, i);
@@ -441,28 +436,21 @@ int ubi_remove_volume(struct ubi_volume_desc *desc)
 			goto out_err;
 	}
 
-	kfree(vol->eba_tbl);
-	vol->eba_tbl = NULL;
 	cdev_del(&vol->cdev);
 	volume_sysfs_close(vol);
 
 	spin_lock(&ubi->volumes_lock);
 	ubi->rsvd_pebs -= reserved_pebs;
 	ubi->avail_pebs += reserved_pebs;
-	i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
-	if (i > 0) {
-		i = ubi->avail_pebs >= i ? i : ubi->avail_pebs;
-		ubi->avail_pebs -= i;
-		ubi->rsvd_pebs += i;
-		ubi->beb_rsvd_pebs += i;
-		if (i > 0)
-			ubi_msg("reserve more %d PEBs", i);
-	}
+	ubi_update_reserved(ubi);
 	ubi->vol_count -= 1;
 	spin_unlock(&ubi->volumes_lock);
 
-	paranoid_check_volumes(ubi);
-	return 0;
+	ubi_volume_notify(ubi, vol, UBI_VOLUME_REMOVED);
+	if (!no_vtbl)
+		self_check_volumes(ubi);
+
+	return err;
 
 out_err:
 	ubi_err("cannot remove volume %d, error %d", vol_id, err);
@@ -480,7 +468,7 @@ out_unlock:
  *
  * This function re-sizes the volume and returns zero in case of success, and a
  * negative error code in case of failure. The caller has to have the
- * @ubi->volumes_mutex locked.
+ * @ubi->device_mutex locked.
  */
 int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 {
@@ -493,12 +481,12 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 	if (ubi->ro_mode)
 		return -EROFS;
 
-	dbg_msg("re-size volume %d to from %d to %d PEBs",
-		vol_id, vol->reserved_pebs, reserved_pebs);
+	dbg_gen("re-size device %d, volume %d to from %d to %d PEBs",
+		ubi->ubi_num, vol_id, vol->reserved_pebs, reserved_pebs);
 
 	if (vol->vol_type == UBI_STATIC_VOLUME &&
 	    reserved_pebs < vol->used_ebs) {
-		dbg_err("too small size %d, %d LEBs contain data",
+		ubi_err("too small size %d, %d LEBs contain data",
 			reserved_pebs, vol->used_ebs);
 		return -EINVAL;
 	}
@@ -527,8 +515,11 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 	if (pebs > 0) {
 		spin_lock(&ubi->volumes_lock);
 		if (pebs > ubi->avail_pebs) {
-			dbg_err("not enough PEBs: requested %d, available %d",
+			ubi_err("not enough PEBs: requested %d, available %d",
 				pebs, ubi->avail_pebs);
+			if (ubi->corr_peb_count)
+				ubi_err("%d PEBs are corrupted and not used",
+					ubi->corr_peb_count);
 			spin_unlock(&ubi->volumes_lock);
 			err = -ENOSPC;
 			goto out_free;
@@ -543,7 +534,7 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 	}
 
 	/* Change volume table record */
-	memcpy(&vtbl_rec, &ubi->vtbl[vol_id], sizeof(struct ubi_vtbl_record));
+	vtbl_rec = ubi->vtbl[vol_id];
 	vtbl_rec.reserved_pebs = cpu_to_be32(reserved_pebs);
 	err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
 	if (err)
@@ -558,15 +549,7 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 		spin_lock(&ubi->volumes_lock);
 		ubi->rsvd_pebs += pebs;
 		ubi->avail_pebs -= pebs;
-		pebs = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
-		if (pebs > 0) {
-			pebs = ubi->avail_pebs >= pebs ? pebs : ubi->avail_pebs;
-			ubi->avail_pebs -= pebs;
-			ubi->rsvd_pebs += pebs;
-			ubi->beb_rsvd_pebs += pebs;
-			if (pebs > 0)
-				ubi_msg("reserve more %d PEBs", pebs);
-		}
+		ubi_update_reserved(ubi);
 		for (i = 0; i < reserved_pebs; i++)
 			new_mapping[i] = vol->eba_tbl[i];
 		kfree(vol->eba_tbl);
@@ -582,8 +565,9 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 			(long long)vol->used_ebs * vol->usable_leb_size;
 	}
 
-	paranoid_check_volumes(ubi);
-	return 0;
+	ubi_volume_notify(ubi, vol, UBI_VOLUME_RESIZED);
+	self_check_volumes(ubi);
+	return err;
 
 out_acc:
 	if (pebs > 0) {
@@ -598,6 +582,45 @@ out_free:
 }
 
 /**
+ * ubi_rename_volumes - re-name UBI volumes.
+ * @ubi: UBI device description object
+ * @rename_list: list of &struct ubi_rename_entry objects
+ *
+ * This function re-names or removes volumes specified in the re-name list.
+ * Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+int ubi_rename_volumes(struct ubi_device *ubi, struct list_head *rename_list)
+{
+	int err;
+	struct ubi_rename_entry *re;
+
+	err = ubi_vtbl_rename_volumes(ubi, rename_list);
+	if (err)
+		return err;
+
+	list_for_each_entry(re, rename_list, list) {
+		if (re->remove) {
+			err = ubi_remove_volume(re->desc, 1);
+			if (err)
+				break;
+		} else {
+			struct ubi_volume *vol = re->desc->vol;
+
+			spin_lock(&ubi->volumes_lock);
+			vol->name_len = re->new_name_len;
+			memcpy(vol->name, re->new_name, re->new_name_len + 1);
+			spin_unlock(&ubi->volumes_lock);
+			ubi_volume_notify(ubi, vol, UBI_VOLUME_RENAMED);
+		}
+	}
+
+	if (!err)
+		self_check_volumes(ubi);
+	return err;
+}
+
+/**
  * ubi_add_volume - add volume.
  * @ubi: UBI device description object
  * @vol: volume description object
@@ -611,8 +634,7 @@ int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 	int err, vol_id = vol->vol_id;
 	dev_t dev;
 
-	dbg_msg("add volume %d", vol_id);
-	ubi_dbg_dump_vol_info(vol);
+	dbg_gen("add volume %d", vol_id);
 
 	/* Register character device for the volume */
 	cdev_init(&vol->cdev, &ubi_vol_cdev_operations);
@@ -625,32 +647,25 @@ int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 		return err;
 	}
 
-	err = ubi_create_gluebi(ubi, vol);
-	if (err)
-		goto out_cdev;
-
 	vol->dev.release = vol_release;
 	vol->dev.parent = &ubi->dev;
 	vol->dev.devt = dev;
 	vol->dev.class = ubi_class;
-	sprintf(&vol->dev.bus_id[0], "%s_%d", ubi->ubi_name, vol->vol_id);
+	dev_set_name(&vol->dev, "%s_%d", ubi->ubi_name, vol->vol_id);
 	err = device_register(&vol->dev);
 	if (err)
-		goto out_gluebi;
+		goto out_cdev;
 
 	err = volume_sysfs_init(ubi, vol);
 	if (err) {
 		cdev_del(&vol->cdev);
-		err = ubi_destroy_gluebi(vol);
 		volume_sysfs_close(vol);
 		return err;
 	}
 
-	paranoid_check_volumes(ubi);
-	return 0;
+	self_check_volumes(ubi);
+	return err;
 
-out_gluebi:
-	err = ubi_destroy_gluebi(vol);
 out_cdev:
 	cdev_del(&vol->cdev);
 	return err;
@@ -666,22 +681,21 @@ out_cdev:
  */
 void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 {
-	dbg_msg("free volume %d", vol->vol_id);
+	dbg_gen("free volume %d", vol->vol_id);
 
 	ubi->volumes[vol->vol_id] = NULL;
-	ubi_destroy_gluebi(vol);
 	cdev_del(&vol->cdev);
 	volume_sysfs_close(vol);
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-
 /**
- * paranoid_check_volume - check volume information.
+ * self_check_volume - check volume information.
  * @ubi: UBI device description object
  * @vol_id: volume ID
+ *
+ * Returns zero if volume is all right and a a negative error code if not.
  */
-static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
+static int self_check_volume(struct ubi_device *ubi, int vol_id)
 {
 	int idx = vol_id2idx(ubi, vol_id);
 	int reserved_pebs, alignment, data_pad, vol_type, name_len, upd_marker;
@@ -699,16 +713,7 @@ static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 			goto fail;
 		}
 		spin_unlock(&ubi->volumes_lock);
-		return;
-	}
-
-	if (vol->exclusive) {
-		/*
-		 * The volume may be being created at the moment, do not check
-		 * it (e.g., it may be in the middle of ubi_create_volume().
-		 */
-		spin_unlock(&ubi->volumes_lock);
-		return;
+		return 0;
 	}
 
 	if (vol->reserved_pebs < 0 || vol->alignment < 0 || vol->data_pad < 0 ||
@@ -740,7 +745,7 @@ static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 	}
 
 	if (vol->upd_marker && vol->corrupted) {
-		dbg_err("update marker and corrupted simultaneously");
+		ubi_err("update marker and corrupted simultaneously");
 		goto fail;
 	}
 
@@ -760,11 +765,6 @@ static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 		goto fail;
 	}
 
-	if (!vol->name) {
-		ubi_err("NULL volume name");
-		goto fail;
-	}
-
 	n = strnlen(vol->name, vol->name_len + 1);
 	if (n != vol->name_len) {
 		ubi_err("bad name_len %lld", n);
@@ -818,31 +818,42 @@ static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 
 	if (alignment != vol->alignment || data_pad != vol->data_pad ||
 	    upd_marker != vol->upd_marker || vol_type != vol->vol_type ||
-	    name_len!= vol->name_len || strncmp(name, vol->name, name_len)) {
+	    name_len != vol->name_len || strncmp(name, vol->name, name_len)) {
 		ubi_err("volume info is different");
 		goto fail;
 	}
 
 	spin_unlock(&ubi->volumes_lock);
-	return;
+	return 0;
 
 fail:
-	ubi_err("paranoid check failed for volume %d", vol_id);
-	ubi_dbg_dump_vol_info(vol);
-	ubi_dbg_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
+	ubi_err("self-check failed for volume %d", vol_id);
+	if (vol)
+		ubi_dump_vol_info(vol);
+	ubi_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
+	dump_stack();
 	spin_unlock(&ubi->volumes_lock);
-	BUG();
+	return -EINVAL;
 }
 
 /**
- * paranoid_check_volumes - check information about all volumes.
+ * self_check_volumes - check information about all volumes.
  * @ubi: UBI device description object
+ *
+ * Returns zero if volumes are all right and a a negative error code if not.
  */
-static void paranoid_check_volumes(struct ubi_device *ubi)
+static int self_check_volumes(struct ubi_device *ubi)
 {
-	int i;
+	int i, err = 0;
 
-	for (i = 0; i < ubi->vtbl_slots; i++)
-		paranoid_check_volume(ubi, i);
+	if (!ubi_dbg_chk_gen(ubi))
+		return 0;
+
+	for (i = 0; i < ubi->vtbl_slots; i++) {
+		err = self_check_volume(ubi, i);
+		if (err)
+			break;
+	}
+
+	return err;
 }
-#endif
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 3fbb4a0..e6c8f5b 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -25,16 +25,15 @@
  * LEB 1. This scheme guarantees recoverability from unclean reboots.
  *
  * In this UBI implementation the on-flash volume table does not contain any
- * information about how many data static volumes contain. This information may
- * be found from the scanning data.
+ * information about how much data static volumes contain.
  *
  * But it would still be beneficial to store this information in the volume
  * table. For example, suppose we have a static volume X, and all its physical
  * eraseblocks became bad for some reasons. Suppose we are attaching the
- * corresponding MTD device, the scanning has found no logical eraseblocks
+ * corresponding MTD device, for some reason we find no logical eraseblocks
  * corresponding to the volume X. According to the volume table volume X does
  * exist. So we don't know whether it is just empty or all its physical
- * eraseblocks went bad. So we cannot alarm the user about this corruption.
+ * eraseblocks went bad. So we cannot alarm the user properly.
  *
  * The volume table also stores so-called "update marker", which is used for
  * volume updates. Before updating the volume, the update marker is set, and
@@ -44,20 +43,20 @@
  * damaged.
  */
 
-#ifdef UBI_LINUX
+#define __UBOOT__
+#ifndef __UBOOT__
 #include <linux/crc32.h>
 #include <linux/err.h>
+#include <linux/slab.h>
 #include <asm/div64.h>
+#else
+#include <ubi_uboot.h>
 #endif
 
-#include <ubi_uboot.h>
+#include <linux/err.h>
 #include "ubi.h"
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-static void paranoid_vtbl_check(const struct ubi_device *ubi);
-#else
-#define paranoid_vtbl_check(ubi)
-#endif
+static void self_vtbl_check(const struct ubi_device *ubi);
 
 /* Empty volume table record */
 static struct ubi_vtbl_record empty_vtbl_record;
@@ -97,18 +96,68 @@ int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
 			return err;
 
 		err = ubi_eba_write_leb(ubi, layout_vol, i, ubi->vtbl, 0,
-					ubi->vtbl_size, UBI_LONGTERM);
+					ubi->vtbl_size);
+		if (err)
+			return err;
+	}
+
+	self_vtbl_check(ubi);
+	return 0;
+}
+
+/**
+ * ubi_vtbl_rename_volumes - rename UBI volumes in the volume table.
+ * @ubi: UBI device description object
+ * @rename_list: list of &struct ubi_rename_entry objects
+ *
+ * This function re-names multiple volumes specified in @req in the volume
+ * table. Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
+			    struct list_head *rename_list)
+{
+	int i, err;
+	struct ubi_rename_entry *re;
+	struct ubi_volume *layout_vol;
+
+	list_for_each_entry(re, rename_list, list) {
+		uint32_t crc;
+		struct ubi_volume *vol = re->desc->vol;
+		struct ubi_vtbl_record *vtbl_rec = &ubi->vtbl[vol->vol_id];
+
+		if (re->remove) {
+			memcpy(vtbl_rec, &empty_vtbl_record,
+			       sizeof(struct ubi_vtbl_record));
+			continue;
+		}
+
+		vtbl_rec->name_len = cpu_to_be16(re->new_name_len);
+		memcpy(vtbl_rec->name, re->new_name, re->new_name_len);
+		memset(vtbl_rec->name + re->new_name_len, 0,
+		       UBI_VOL_NAME_MAX + 1 - re->new_name_len);
+		crc = crc32(UBI_CRC32_INIT, vtbl_rec,
+			    UBI_VTBL_RECORD_SIZE_CRC);
+		vtbl_rec->crc = cpu_to_be32(crc);
+	}
+
+	layout_vol = ubi->volumes[vol_id2idx(ubi, UBI_LAYOUT_VOLUME_ID)];
+	for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) {
+		err = ubi_eba_unmap_leb(ubi, layout_vol, i);
+		if (err)
+			return err;
+
+		err = ubi_eba_write_leb(ubi, layout_vol, i, ubi->vtbl, 0,
+					ubi->vtbl_size);
 		if (err)
 			return err;
 	}
 
-	paranoid_vtbl_check(ubi);
 	return 0;
 }
 
 /**
- * vtbl_check - check if volume table is not corrupted and contains sensible
- *              data.
+ * vtbl_check - check if volume table is not corrupted and sensible.
  * @ubi: UBI device description object
  * @vtbl: volume table
  *
@@ -132,13 +181,13 @@ static int vtbl_check(const struct ubi_device *ubi,
 		upd_marker = vtbl[i].upd_marker;
 		vol_type = vtbl[i].vol_type;
 		name_len = be16_to_cpu(vtbl[i].name_len);
-		name = (const char *) &vtbl[i].name[0];
+		name = &vtbl[i].name[0];
 
 		crc = crc32(UBI_CRC32_INIT, &vtbl[i], UBI_VTBL_RECORD_SIZE_CRC);
 		if (be32_to_cpu(vtbl[i].crc) != crc) {
 			ubi_err("bad CRC at record %u: %#08x, not %#08x",
 				 i, crc, be32_to_cpu(vtbl[i].crc));
-			ubi_dbg_dump_vtbl_record(&vtbl[i], i);
+			ubi_dump_vtbl_record(&vtbl[i], i);
 			return 1;
 		}
 
@@ -170,7 +219,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 
 		n = ubi->leb_size % alignment;
 		if (data_pad != n) {
-			dbg_err("bad data_pad, has to be %d", n);
+			ubi_err("bad data_pad, has to be %d", n);
 			err = 6;
 			goto bad;
 		}
@@ -186,8 +235,8 @@ static int vtbl_check(const struct ubi_device *ubi,
 		}
 
 		if (reserved_pebs > ubi->good_peb_count) {
-			dbg_err("too large reserved_pebs, good PEBs %d",
-				ubi->good_peb_count);
+			ubi_err("too large reserved_pebs %d, good PEBs %d",
+				reserved_pebs, ubi->good_peb_count);
 			err = 9;
 			goto bad;
 		}
@@ -215,11 +264,15 @@ static int vtbl_check(const struct ubi_device *ubi,
 			int len2 = be16_to_cpu(vtbl[n].name_len);
 
 			if (len1 > 0 && len1 == len2 &&
-			    !strncmp((char *)vtbl[i].name, (char *)vtbl[n].name, len1)) {
-				ubi_err("volumes %d and %d have the same name"
-					" \"%s\"", i, n, vtbl[i].name);
-				ubi_dbg_dump_vtbl_record(&vtbl[i], i);
-				ubi_dbg_dump_vtbl_record(&vtbl[n], n);
+#ifndef __UBOOT__
+			    !strncmp(vtbl[i].name, vtbl[n].name, len1)) {
+#else
+			    !strncmp((char *)vtbl[i].name, vtbl[n].name, len1)) {
+#endif
+				ubi_err("volumes %d and %d have the same name \"%s\"",
+					i, n, vtbl[i].name);
+				ubi_dump_vtbl_record(&vtbl[i], i);
+				ubi_dump_vtbl_record(&vtbl[n], n);
 				return -EINVAL;
 			}
 		}
@@ -229,76 +282,64 @@ static int vtbl_check(const struct ubi_device *ubi,
 
 bad:
 	ubi_err("volume table check failed: record %d, error %d", i, err);
-	ubi_dbg_dump_vtbl_record(&vtbl[i], i);
+	ubi_dump_vtbl_record(&vtbl[i], i);
 	return -EINVAL;
 }
 
 /**
  * create_vtbl - create a copy of volume table.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  * @copy: number of the volume table copy
  * @vtbl: contents of the volume table
  *
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-static int create_vtbl(struct ubi_device *ubi, struct ubi_scan_info *si,
+static int create_vtbl(struct ubi_device *ubi, struct ubi_attach_info *ai,
 		       int copy, void *vtbl)
 {
 	int err, tries = 0;
-	static struct ubi_vid_hdr *vid_hdr;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *new_seb, *old_seb = NULL;
+	struct ubi_vid_hdr *vid_hdr;
+	struct ubi_ainf_peb *new_aeb;
 
-	ubi_msg("create volume table (copy #%d)", copy + 1);
+	dbg_gen("create volume table (copy #%d)", copy + 1);
 
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
 	if (!vid_hdr)
 		return -ENOMEM;
 
-	/*
-	 * Check if there is a logical eraseblock which would have to contain
-	 * this volume table copy was found during scanning. It has to be wiped
-	 * out.
-	 */
-	sv = ubi_scan_find_sv(si, UBI_LAYOUT_VOLUME_ID);
-	if (sv)
-		old_seb = ubi_scan_find_seb(sv, copy);
-
 retry:
-	new_seb = ubi_scan_get_free_peb(ubi, si);
-	if (IS_ERR(new_seb)) {
-		err = PTR_ERR(new_seb);
+	new_aeb = ubi_early_get_peb(ubi, ai);
+	if (IS_ERR(new_aeb)) {
+		err = PTR_ERR(new_aeb);
 		goto out_free;
 	}
 
-	vid_hdr->vol_type = UBI_VID_DYNAMIC;
+	vid_hdr->vol_type = UBI_LAYOUT_VOLUME_TYPE;
 	vid_hdr->vol_id = cpu_to_be32(UBI_LAYOUT_VOLUME_ID);
 	vid_hdr->compat = UBI_LAYOUT_VOLUME_COMPAT;
 	vid_hdr->data_size = vid_hdr->used_ebs =
 			     vid_hdr->data_pad = cpu_to_be32(0);
 	vid_hdr->lnum = cpu_to_be32(copy);
-	vid_hdr->sqnum = cpu_to_be64(++si->max_sqnum);
-	vid_hdr->leb_ver = cpu_to_be32(old_seb ? old_seb->leb_ver + 1: 0);
+	vid_hdr->sqnum = cpu_to_be64(++ai->max_sqnum);
 
 	/* The EC header is already there, write the VID header */
-	err = ubi_io_write_vid_hdr(ubi, new_seb->pnum, vid_hdr);
+	err = ubi_io_write_vid_hdr(ubi, new_aeb->pnum, vid_hdr);
 	if (err)
 		goto write_error;
 
 	/* Write the layout volume contents */
-	err = ubi_io_write_data(ubi, vtbl, new_seb->pnum, 0, ubi->vtbl_size);
+	err = ubi_io_write_data(ubi, vtbl, new_aeb->pnum, 0, ubi->vtbl_size);
 	if (err)
 		goto write_error;
 
 	/*
-	 * And add it to the scanning information. Don't delete the old
-	 * @old_seb as it will be deleted and freed in 'ubi_scan_add_used()'.
+	 * And add it to the attaching information. Don't delete the old version
+	 * of this LEB as it will be deleted and freed in 'ubi_add_to_av()'.
 	 */
-	err = ubi_scan_add_used(ubi, si, new_seb->pnum, new_seb->ec,
-				vid_hdr, 0);
-	kfree(new_seb);
+	err = ubi_add_to_av(ubi, ai, new_aeb->pnum, new_aeb->ec, vid_hdr, 0);
+	kmem_cache_free(ai->aeb_slab_cache, new_aeb);
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
 
@@ -308,10 +349,10 @@ write_error:
 		 * Probably this physical eraseblock went bad, try to pick
 		 * another one.
 		 */
-		list_add_tail(&new_seb->u.list, &si->corr);
+		list_add(&new_aeb->u.list, &ai->erase);
 		goto retry;
 	}
-	kfree(new_seb);
+	kmem_cache_free(ai->aeb_slab_cache, new_aeb);
 out_free:
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
@@ -321,20 +362,20 @@ out_free:
 /**
  * process_lvol - process the layout volume.
  * @ubi: UBI device description object
- * @si: scanning information
- * @sv: layout volume scanning information
+ * @ai: attaching information
+ * @av: layout volume attaching information
  *
  * This function is responsible for reading the layout volume, ensuring it is
  * not corrupted, and recovering from corruptions if needed. Returns volume
  * table in case of success and a negative error code in case of failure.
  */
 static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
-					    struct ubi_scan_info *si,
-					    struct ubi_scan_volume *sv)
+					    struct ubi_attach_info *ai,
+					    struct ubi_ainf_volume *av)
 {
 	int err;
 	struct rb_node *rb;
-	struct ubi_scan_leb *seb;
+	struct ubi_ainf_peb *aeb;
 	struct ubi_vtbl_record *leb[UBI_LAYOUT_VOLUME_EBS] = { NULL, NULL };
 	int leb_corrupted[UBI_LAYOUT_VOLUME_EBS] = {1, 1};
 
@@ -356,25 +397,24 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 	 * 0 contains more recent information.
 	 *
 	 * So the plan is to first check LEB 0. Then
-	 * a. if LEB 0 is OK, it must be containing the most resent data; then
+	 * a. if LEB 0 is OK, it must be containing the most recent data; then
 	 *    we compare it with LEB 1, and if they are different, we copy LEB
 	 *    0 to LEB 1;
 	 * b. if LEB 0 is corrupted, but LEB 1 has to be OK, and we copy LEB 1
 	 *    to LEB 0.
 	 */
 
-	dbg_msg("check layout volume");
+	dbg_gen("check layout volume");
 
 	/* Read both LEB 0 and LEB 1 into memory */
-	ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
-		leb[seb->lnum] = vmalloc(ubi->vtbl_size);
-		if (!leb[seb->lnum]) {
+	ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb) {
+		leb[aeb->lnum] = vzalloc(ubi->vtbl_size);
+		if (!leb[aeb->lnum]) {
 			err = -ENOMEM;
 			goto out_free;
 		}
-		memset(leb[seb->lnum], 0, ubi->vtbl_size);
 
-		err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
+		err = ubi_io_read_data(ubi, leb[aeb->lnum], aeb->pnum, 0,
 				       ubi->vtbl_size);
 		if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err))
 			/*
@@ -382,12 +422,12 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 			 * uncorrectable ECC error, but we have our own CRC and
 			 * the data will be checked later. If the data is OK,
 			 * the PEB will be scrubbed (because we set
-			 * seb->scrub). If the data is not OK, the contents of
+			 * aeb->scrub). If the data is not OK, the contents of
 			 * the PEB will be recovered from the second copy, and
-			 * seb->scrub will be cleared in
-			 * 'ubi_scan_add_used()'.
+			 * aeb->scrub will be cleared in
+			 * 'ubi_add_to_av()'.
 			 */
-			seb->scrub = 1;
+			aeb->scrub = 1;
 		else if (err)
 			goto out_free;
 	}
@@ -402,10 +442,11 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 	if (!leb_corrupted[0]) {
 		/* LEB 0 is OK */
 		if (leb[1])
-			leb_corrupted[1] = memcmp(leb[0], leb[1], ubi->vtbl_size);
+			leb_corrupted[1] = memcmp(leb[0], leb[1],
+						  ubi->vtbl_size);
 		if (leb_corrupted[1]) {
 			ubi_warn("volume table copy #2 is corrupted");
-			err = create_vtbl(ubi, si, 1, leb[0]);
+			err = create_vtbl(ubi, ai, 1, leb[0]);
 			if (err)
 				goto out_free;
 			ubi_msg("volume table was restored");
@@ -428,7 +469,7 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 		}
 
 		ubi_warn("volume table copy #1 is corrupted");
-		err = create_vtbl(ubi, si, 0, leb[1]);
+		err = create_vtbl(ubi, ai, 0, leb[1]);
 		if (err)
 			goto out_free;
 		ubi_msg("volume table was restored");
@@ -446,21 +487,20 @@ out_free:
 /**
  * create_empty_lvol - create empty layout volume.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * This function returns volume table contents in case of success and a
  * negative error code in case of failure.
  */
 static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
-						 struct ubi_scan_info *si)
+						 struct ubi_attach_info *ai)
 {
 	int i;
 	struct ubi_vtbl_record *vtbl;
 
-	vtbl = vmalloc(ubi->vtbl_size);
+	vtbl = vzalloc(ubi->vtbl_size);
 	if (!vtbl)
 		return ERR_PTR(-ENOMEM);
-	memset(vtbl, 0, ubi->vtbl_size);
 
 	for (i = 0; i < ubi->vtbl_slots; i++)
 		memcpy(&vtbl[i], &empty_vtbl_record, UBI_VTBL_RECORD_SIZE);
@@ -468,7 +508,7 @@ static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
 	for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) {
 		int err;
 
-		err = create_vtbl(ubi, si, i, vtbl);
+		err = create_vtbl(ubi, ai, i, vtbl);
 		if (err) {
 			vfree(vtbl);
 			return ERR_PTR(err);
@@ -481,18 +521,19 @@ static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
 /**
  * init_volumes - initialize volume information for existing volumes.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: scanning information
  * @vtbl: volume table
  *
  * This function allocates volume description objects for existing volumes.
  * Returns zero in case of success and a negative error code in case of
  * failure.
  */
-static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
+static int init_volumes(struct ubi_device *ubi,
+			const struct ubi_attach_info *ai,
 			const struct ubi_vtbl_record *vtbl)
 {
 	int i, reserved_pebs = 0;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_volume *av;
 	struct ubi_volume *vol;
 
 	for (i = 0; i < ubi->vtbl_slots; i++) {
@@ -520,8 +561,8 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 		if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) {
 			/* Auto re-size flag may be set only for one volume */
 			if (ubi->autoresize_vol_id != -1) {
-				ubi_err("more then one auto-resize volume (%d "
-					"and %d)", ubi->autoresize_vol_id, i);
+				ubi_err("more than one auto-resize volume (%d and %d)",
+					ubi->autoresize_vol_id, i);
 				kfree(vol);
 				return -EINVAL;
 			}
@@ -548,8 +589,8 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 		}
 
 		/* Static volumes only */
-		sv = ubi_scan_find_sv(si, i);
-		if (!sv) {
+		av = ubi_find_av(ai, i);
+		if (!av) {
 			/*
 			 * No eraseblocks belonging to this volume found. We
 			 * don't actually know whether this static volume is
@@ -561,22 +602,22 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 			continue;
 		}
 
-		if (sv->leb_count != sv->used_ebs) {
+		if (av->leb_count != av->used_ebs) {
 			/*
 			 * We found a static volume which misses several
 			 * eraseblocks. Treat it as corrupted.
 			 */
 			ubi_warn("static volume %d misses %d LEBs - corrupted",
-				 sv->vol_id, sv->used_ebs - sv->leb_count);
+				 av->vol_id, av->used_ebs - av->leb_count);
 			vol->corrupted = 1;
 			continue;
 		}
 
-		vol->used_ebs = sv->used_ebs;
+		vol->used_ebs = av->used_ebs;
 		vol->used_bytes =
 			(long long)(vol->used_ebs - 1) * vol->usable_leb_size;
-		vol->used_bytes += sv->last_data_size;
-		vol->last_eb_bytes = sv->last_data_size;
+		vol->used_bytes += av->last_data_size;
+		vol->last_eb_bytes = av->last_data_size;
 	}
 
 	/* And add the layout volume */
@@ -585,7 +626,7 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 		return -ENOMEM;
 
 	vol->reserved_pebs = UBI_LAYOUT_VOLUME_EBS;
-	vol->alignment = 1;
+	vol->alignment = UBI_LAYOUT_VOLUME_ALIGN;
 	vol->vol_type = UBI_DYNAMIC_VOLUME;
 	vol->name_len = sizeof(UBI_LAYOUT_VOLUME_NAME) - 1;
 	memcpy(vol->name, UBI_LAYOUT_VOLUME_NAME, vol->name_len + 1);
@@ -603,9 +644,13 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 	ubi->vol_count += 1;
 	vol->ubi = ubi;
 
-	if (reserved_pebs > ubi->avail_pebs)
+	if (reserved_pebs > ubi->avail_pebs) {
 		ubi_err("not enough PEBs, required %d, available %d",
 			reserved_pebs, ubi->avail_pebs);
+		if (ubi->corr_peb_count)
+			ubi_err("%d PEBs are corrupted and not used",
+				ubi->corr_peb_count);
+	}
 	ubi->rsvd_pebs += reserved_pebs;
 	ubi->avail_pebs -= reserved_pebs;
 
@@ -613,105 +658,104 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 }
 
 /**
- * check_sv - check volume scanning information.
+ * check_av - check volume attaching information.
  * @vol: UBI volume description object
- * @sv: volume scanning information
+ * @av: volume attaching information
  *
- * This function returns zero if the volume scanning information is consistent
+ * This function returns zero if the volume attaching information is consistent
  * to the data read from the volume tabla, and %-EINVAL if not.
  */
-static int check_sv(const struct ubi_volume *vol,
-		    const struct ubi_scan_volume *sv)
+static int check_av(const struct ubi_volume *vol,
+		    const struct ubi_ainf_volume *av)
 {
 	int err;
 
-	if (sv->highest_lnum >= vol->reserved_pebs) {
+	if (av->highest_lnum >= vol->reserved_pebs) {
 		err = 1;
 		goto bad;
 	}
-	if (sv->leb_count > vol->reserved_pebs) {
+	if (av->leb_count > vol->reserved_pebs) {
 		err = 2;
 		goto bad;
 	}
-	if (sv->vol_type != vol->vol_type) {
+	if (av->vol_type != vol->vol_type) {
 		err = 3;
 		goto bad;
 	}
-	if (sv->used_ebs > vol->reserved_pebs) {
+	if (av->used_ebs > vol->reserved_pebs) {
 		err = 4;
 		goto bad;
 	}
-	if (sv->data_pad != vol->data_pad) {
+	if (av->data_pad != vol->data_pad) {
 		err = 5;
 		goto bad;
 	}
 	return 0;
 
 bad:
-	ubi_err("bad scanning information, error %d", err);
-	ubi_dbg_dump_sv(sv);
-	ubi_dbg_dump_vol_info(vol);
+	ubi_err("bad attaching information, error %d", err);
+	ubi_dump_av(av);
+	ubi_dump_vol_info(vol);
 	return -EINVAL;
 }
 
 /**
- * check_scanning_info - check that scanning information.
+ * check_attaching_info - check that attaching information.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * Even though we protect on-flash data by CRC checksums, we still don't trust
- * the media. This function ensures that scanning information is consistent to
- * the information read from the volume table. Returns zero if the scanning
+ * the media. This function ensures that attaching information is consistent to
+ * the information read from the volume table. Returns zero if the attaching
  * information is OK and %-EINVAL if it is not.
  */
-static int check_scanning_info(const struct ubi_device *ubi,
-			       struct ubi_scan_info *si)
+static int check_attaching_info(const struct ubi_device *ubi,
+			       struct ubi_attach_info *ai)
 {
 	int err, i;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_volume *av;
 	struct ubi_volume *vol;
 
-	if (si->vols_found > UBI_INT_VOL_COUNT + ubi->vtbl_slots) {
-		ubi_err("scanning found %d volumes, maximum is %d + %d",
-			si->vols_found, UBI_INT_VOL_COUNT, ubi->vtbl_slots);
+	if (ai->vols_found > UBI_INT_VOL_COUNT + ubi->vtbl_slots) {
+		ubi_err("found %d volumes while attaching, maximum is %d + %d",
+			ai->vols_found, UBI_INT_VOL_COUNT, ubi->vtbl_slots);
 		return -EINVAL;
 	}
 
-	if (si->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT &&
-	    si->highest_vol_id < UBI_INTERNAL_VOL_START) {
-		ubi_err("too large volume ID %d found by scanning",
-			si->highest_vol_id);
+	if (ai->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT &&
+	    ai->highest_vol_id < UBI_INTERNAL_VOL_START) {
+		ubi_err("too large volume ID %d found", ai->highest_vol_id);
 		return -EINVAL;
 	}
 
 	for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
 		cond_resched();
 
-		sv = ubi_scan_find_sv(si, i);
+		av = ubi_find_av(ai, i);
 		vol = ubi->volumes[i];
 		if (!vol) {
-			if (sv)
-				ubi_scan_rm_volume(si, sv);
+			if (av)
+				ubi_remove_av(ai, av);
 			continue;
 		}
 
 		if (vol->reserved_pebs == 0) {
 			ubi_assert(i < ubi->vtbl_slots);
 
-			if (!sv)
+			if (!av)
 				continue;
 
 			/*
-			 * During scanning we found a volume which does not
+			 * During attaching we found a volume which does not
 			 * exist according to the information in the volume
 			 * table. This must have happened due to an unclean
 			 * reboot while the volume was being removed. Discard
 			 * these eraseblocks.
 			 */
-			ubi_msg("finish volume %d removal", sv->vol_id);
-			ubi_scan_rm_volume(si, sv);
-		} else if (sv) {
-			err = check_sv(vol, sv);
+			ubi_msg("finish volume %d removal", av->vol_id);
+			ubi_remove_av(ai, av);
+		} else if (av) {
+			err = check_av(vol, av);
 			if (err)
 				return err;
 		}
@@ -721,19 +765,18 @@ static int check_scanning_info(const struct ubi_device *ubi,
 }
 
 /**
- * ubi_read_volume_table - read volume table.
- * information.
+ * ubi_read_volume_table - read the volume table.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * This function reads volume table, checks it, recover from errors if needed,
  * or creates it if needed. Returns zero in case of success and a negative
  * error code in case of failure.
  */
-int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
+int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_attach_info *ai)
 {
 	int i, err;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_volume *av;
 
 	empty_vtbl_record.crc = cpu_to_be32(0xf116c36b);
 
@@ -748,8 +791,8 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 	ubi->vtbl_size = ubi->vtbl_slots * UBI_VTBL_RECORD_SIZE;
 	ubi->vtbl_size = ALIGN(ubi->vtbl_size, ubi->min_io_size);
 
-	sv = ubi_scan_find_sv(si, UBI_LAYOUT_VOLUME_ID);
-	if (!sv) {
+	av = ubi_find_av(ai, UBI_LAYOUT_VOLUME_ID);
+	if (!av) {
 		/*
 		 * No logical eraseblocks belonging to the layout volume were
 		 * found. This could mean that the flash is just empty. In
@@ -758,8 +801,8 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 		 * But if flash is not empty this must be a corruption or the
 		 * MTD device just contains garbage.
 		 */
-		if (si->is_empty) {
-			ubi->vtbl = create_empty_lvol(ubi, si);
+		if (ai->is_empty) {
+			ubi->vtbl = create_empty_lvol(ubi, ai);
 			if (IS_ERR(ubi->vtbl))
 				return PTR_ERR(ubi->vtbl);
 		} else {
@@ -767,33 +810,33 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 			return -EINVAL;
 		}
 	} else {
-		if (sv->leb_count > UBI_LAYOUT_VOLUME_EBS) {
+		if (av->leb_count > UBI_LAYOUT_VOLUME_EBS) {
 			/* This must not happen with proper UBI images */
-			dbg_err("too many LEBs (%d) in layout volume",
-				sv->leb_count);
+			ubi_err("too many LEBs (%d) in layout volume",
+				av->leb_count);
 			return -EINVAL;
 		}
 
-		ubi->vtbl = process_lvol(ubi, si, sv);
+		ubi->vtbl = process_lvol(ubi, ai, av);
 		if (IS_ERR(ubi->vtbl))
 			return PTR_ERR(ubi->vtbl);
 	}
 
-	ubi->avail_pebs = ubi->good_peb_count;
+	ubi->avail_pebs = ubi->good_peb_count - ubi->corr_peb_count;
 
 	/*
 	 * The layout volume is OK, initialize the corresponding in-RAM data
 	 * structures.
 	 */
-	err = init_volumes(ubi, si, ubi->vtbl);
+	err = init_volumes(ubi, ai, ubi->vtbl);
 	if (err)
 		goto out_free;
 
 	/*
-	 * Get sure that the scanning information is consistent to the
+	 * Make sure that the attaching information is consistent to the
 	 * information stored in the volume table.
 	 */
-	err = check_scanning_info(ubi, si);
+	err = check_attaching_info(ubi, ai);
 	if (err)
 		goto out_free;
 
@@ -801,26 +844,24 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 
 out_free:
 	vfree(ubi->vtbl);
-	for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++)
-		if (ubi->volumes[i]) {
-			kfree(ubi->volumes[i]);
-			ubi->volumes[i] = NULL;
-		}
+	for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
+		kfree(ubi->volumes[i]);
+		ubi->volumes[i] = NULL;
+	}
 	return err;
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-
 /**
- * paranoid_vtbl_check - check volume table.
+ * self_vtbl_check - check volume table.
  * @ubi: UBI device description object
  */
-static void paranoid_vtbl_check(const struct ubi_device *ubi)
+static void self_vtbl_check(const struct ubi_device *ubi)
 {
+	if (!ubi_dbg_chk_gen(ubi))
+		return;
+
 	if (vtbl_check(ubi, ubi->vtbl)) {
-		ubi_err("paranoid check failed");
+		ubi_err("self-check failed");
 		BUG();
 	}
 }
-
-#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 1eaa88b..2987ffc 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -7,97 +7,117 @@
  */
 
 /*
- * UBI wear-leveling unit.
+ * UBI wear-leveling sub-system.
  *
- * This unit is responsible for wear-leveling. It works in terms of physical
- * eraseblocks and erase counters and knows nothing about logical eraseblocks,
- * volumes, etc. From this unit's perspective all physical eraseblocks are of
- * two types - used and free. Used physical eraseblocks are those that were
- * "get" by the 'ubi_wl_get_peb()' function, and free physical eraseblocks are
- * those that were put by the 'ubi_wl_put_peb()' function.
+ * This sub-system is responsible for wear-leveling. It works in terms of
+ * physical eraseblocks and erase counters and knows nothing about logical
+ * eraseblocks, volumes, etc. From this sub-system's perspective all physical
+ * eraseblocks are of two types - used and free. Used physical eraseblocks are
+ * those that were "get" by the 'ubi_wl_get_peb()' function, and free physical
+ * eraseblocks are those that were put by the 'ubi_wl_put_peb()' function.
  *
  * Physical eraseblocks returned by 'ubi_wl_get_peb()' have only erase counter
- * header. The rest of the physical eraseblock contains only 0xFF bytes.
+ * header. The rest of the physical eraseblock contains only %0xFF bytes.
  *
- * When physical eraseblocks are returned to the WL unit by means of the
+ * When physical eraseblocks are returned to the WL sub-system by means of the
  * 'ubi_wl_put_peb()' function, they are scheduled for erasure. The erasure is
  * done asynchronously in context of the per-UBI device background thread,
- * which is also managed by the WL unit.
+ * which is also managed by the WL sub-system.
  *
  * The wear-leveling is ensured by means of moving the contents of used
  * physical eraseblocks with low erase counter to free physical eraseblocks
  * with high erase counter.
  *
- * The 'ubi_wl_get_peb()' function accepts data type hints which help to pick
- * an "optimal" physical eraseblock. For example, when it is known that the
- * physical eraseblock will be "put" soon because it contains short-term data,
- * the WL unit may pick a free physical eraseblock with low erase counter, and
- * so forth.
+ * If the WL sub-system fails to erase a physical eraseblock, it marks it as
+ * bad.
  *
- * If the WL unit fails to erase a physical eraseblock, it marks it as bad.
+ * This sub-system is also responsible for scrubbing. If a bit-flip is detected
+ * in a physical eraseblock, it has to be moved. Technically this is the same
+ * as moving it for wear-leveling reasons.
  *
- * This unit is also responsible for scrubbing. If a bit-flip is detected in a
- * physical eraseblock, it has to be moved. Technically this is the same as
- * moving it for wear-leveling reasons.
+ * As it was said, for the UBI sub-system all physical eraseblocks are either
+ * "free" or "used". Free eraseblock are kept in the @wl->free RB-tree, while
+ * used eraseblocks are kept in @wl->used, @wl->erroneous, or @wl->scrub
+ * RB-trees, as well as (temporarily) in the @wl->pq queue.
  *
- * As it was said, for the UBI unit all physical eraseblocks are either "free"
- * or "used". Free eraseblock are kept in the @wl->free RB-tree, while used
- * eraseblocks are kept in a set of different RB-trees: @wl->used,
- * @wl->prot.pnum, @wl->prot.aec, and @wl->scrub.
+ * When the WL sub-system returns a physical eraseblock, the physical
+ * eraseblock is protected from being moved for some "time". For this reason,
+ * the physical eraseblock is not directly moved from the @wl->free tree to the
+ * @wl->used tree. There is a protection queue in between where this
+ * physical eraseblock is temporarily stored (@wl->pq).
+ *
+ * All this protection stuff is needed because:
+ *  o we don't want to move physical eraseblocks just after we have given them
+ *    to the user; instead, we first want to let users fill them up with data;
+ *
+ *  o there is a chance that the user will put the physical eraseblock very
+ *    soon, so it makes sense not to move it for some time, but wait.
+ *
+ * Physical eraseblocks stay protected only for limited time. But the "time" is
+ * measured in erase cycles in this case. This is implemented with help of the
+ * protection queue. Eraseblocks are put to the tail of this queue when they
+ * are returned by the 'ubi_wl_get_peb()', and eraseblocks are removed from the
+ * head of the queue on each erase operation (for any eraseblock). So the
+ * length of the queue defines how may (global) erase cycles PEBs are protected.
+ *
+ * To put it differently, each physical eraseblock has 2 main states: free and
+ * used. The former state corresponds to the @wl->free tree. The latter state
+ * is split up on several sub-states:
+ * o the WL movement is allowed (@wl->used tree);
+ * o the WL movement is disallowed (@wl->erroneous) because the PEB is
+ *   erroneous - e.g., there was a read error;
+ * o the WL movement is temporarily prohibited (@wl->pq queue);
+ * o scrubbing is needed (@wl->scrub tree).
+ *
+ * Depending on the sub-state, wear-leveling entries of the used physical
+ * eraseblocks may be kept in one of those structures.
  *
  * Note, in this implementation, we keep a small in-RAM object for each physical
  * eraseblock. This is surely not a scalable solution. But it appears to be good
  * enough for moderately large flashes and it is simple. In future, one may
- * re-work this unit and make it more scalable.
+ * re-work this sub-system and make it more scalable.
  *
- * At the moment this unit does not utilize the sequence number, which was
- * introduced relatively recently. But it would be wise to do this because the
- * sequence number of a logical eraseblock characterizes how old is it. For
+ * At the moment this sub-system does not utilize the sequence number, which
+ * was introduced relatively recently. But it would be wise to do this because
+ * the sequence number of a logical eraseblock characterizes how old is it. For
  * example, when we move a PEB with low erase counter, and we need to pick the
  * target PEB, we pick a PEB with the highest EC if our PEB is "old" and we
  * pick target PEB with an average EC if our PEB is not very "old". This is a
- * room for future re-works of the WL unit.
- *
- * FIXME: looks too complex, should be simplified (later).
+ * room for future re-works of the WL sub-system.
  */
 
-#ifdef UBI_LINUX
+#define __UBOOT__
+#ifndef __UBOOT__
 #include <linux/slab.h>
 #include <linux/crc32.h>
 #include <linux/freezer.h>
 #include <linux/kthread.h>
+#else
+#include <ubi_uboot.h>
 #endif
 
-#include <ubi_uboot.h>
 #include "ubi.h"
 
 /* Number of physical eraseblocks reserved for wear-leveling purposes */
 #define WL_RESERVED_PEBS 1
 
 /*
- * How many erase cycles are short term, unknown, and long term physical
- * eraseblocks protected.
- */
-#define ST_PROTECTION 16
-#define U_PROTECTION  10
-#define LT_PROTECTION 4
-
-/*
  * Maximum difference between two erase counters. If this threshold is
- * exceeded, the WL unit starts moving data from used physical eraseblocks with
- * low erase counter to free physical eraseblocks with high erase counter.
+ * exceeded, the WL sub-system starts moving data from used physical
+ * eraseblocks with low erase counter to free physical eraseblocks with high
+ * erase counter.
  */
 #define UBI_WL_THRESHOLD CONFIG_MTD_UBI_WL_THRESHOLD
 
 /*
- * When a physical eraseblock is moved, the WL unit has to pick the target
+ * When a physical eraseblock is moved, the WL sub-system has to pick the target
  * physical eraseblock to move to. The simplest way would be just to pick the
  * one with the highest erase counter. But in certain workloads this could lead
  * to an unlimited wear of one or few physical eraseblock. Indeed, imagine a
  * situation when the picked physical eraseblock is constantly erased after the
  * data is written to it. So, we have a constant which limits the highest erase
- * counter of the free physical eraseblock to pick. Namely, the WL unit does
- * not pick eraseblocks with erase counter greater then the lowest erase
+ * counter of the free physical eraseblock to pick. Namely, the WL sub-system
+ * does not pick eraseblocks with erase counter greater than the lowest erase
  * counter plus %WL_FREE_MAX_DIFF.
  */
 #define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD)
@@ -108,89 +128,48 @@
  */
 #define WL_MAX_FAILURES 32
 
+static int self_check_ec(struct ubi_device *ubi, int pnum, int ec);
+static int self_check_in_wl_tree(const struct ubi_device *ubi,
+				 struct ubi_wl_entry *e, struct rb_root *root);
+static int self_check_in_pq(const struct ubi_device *ubi,
+			    struct ubi_wl_entry *e);
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+#ifndef __UBOOT__
 /**
- * struct ubi_wl_prot_entry - PEB protection entry.
- * @rb_pnum: link in the @wl->prot.pnum RB-tree
- * @rb_aec: link in the @wl->prot.aec RB-tree
- * @abs_ec: the absolute erase counter value when the protection ends
- * @e: the wear-leveling entry of the physical eraseblock under protection
- *
- * When the WL unit returns a physical eraseblock, the physical eraseblock is
- * protected from being moved for some "time". For this reason, the physical
- * eraseblock is not directly moved from the @wl->free tree to the @wl->used
- * tree. There is one more tree in between where this physical eraseblock is
- * temporarily stored (@wl->prot).
- *
- * All this protection stuff is needed because:
- *  o we don't want to move physical eraseblocks just after we have given them
- *    to the user; instead, we first want to let users fill them up with data;
- *
- *  o there is a chance that the user will put the physical eraseblock very
- *    soon, so it makes sense not to move it for some time, but wait; this is
- *    especially important in case of "short term" physical eraseblocks.
- *
- * Physical eraseblocks stay protected only for limited time. But the "time" is
- * measured in erase cycles in this case. This is implemented with help of the
- * absolute erase counter (@wl->abs_ec). When it reaches certain value, the
- * physical eraseblocks are moved from the protection trees (@wl->prot.*) to
- * the @wl->used tree.
- *
- * Protected physical eraseblocks are searched by physical eraseblock number
- * (when they are put) and by the absolute erase counter (to check if it is
- * time to move them to the @wl->used tree). So there are actually 2 RB-trees
- * storing the protected physical eraseblocks: @wl->prot.pnum and
- * @wl->prot.aec. They are referred to as the "protection" trees. The
- * first one is indexed by the physical eraseblock number. The second one is
- * indexed by the absolute erase counter. Both trees store
- * &struct ubi_wl_prot_entry objects.
- *
- * Each physical eraseblock has 2 main states: free and used. The former state
- * corresponds to the @wl->free tree. The latter state is split up on several
- * sub-states:
- * o the WL movement is allowed (@wl->used tree);
- * o the WL movement is temporarily prohibited (@wl->prot.pnum and
- * @wl->prot.aec trees);
- * o scrubbing is needed (@wl->scrub tree).
- *
- * Depending on the sub-state, wear-leveling entries of the used physical
- * eraseblocks may be kept in one of those trees.
+ * update_fastmap_work_fn - calls ubi_update_fastmap from a work queue
+ * @wrk: the work description object
  */
-struct ubi_wl_prot_entry {
-	struct rb_node rb_pnum;
-	struct rb_node rb_aec;
-	unsigned long long abs_ec;
-	struct ubi_wl_entry *e;
-};
+static void update_fastmap_work_fn(struct work_struct *wrk)
+{
+	struct ubi_device *ubi = container_of(wrk, struct ubi_device, fm_work);
+	ubi_update_fastmap(ubi);
+}
+#endif
 
 /**
- * struct ubi_work - UBI work description data structure.
- * @list: a link in the list of pending works
- * @func: worker function
- * @priv: private data of the worker function
- *
- * @e: physical eraseblock to erase
- * @torture: if the physical eraseblock has to be tortured
- *
- * The @func pointer points to the worker function. If the @cancel argument is
- * not zero, the worker has to free the resources and exit immediately. The
- * worker has to return zero in case of success and a negative error code in
- * case of failure.
+ *  ubi_ubi_is_fm_block - returns 1 if a PEB is currently used in a fastmap.
+ *  @ubi: UBI device description object
+ *  @pnum: the to be checked PEB
  */
-struct ubi_work {
-	struct list_head list;
-	int (*func)(struct ubi_device *ubi, struct ubi_work *wrk, int cancel);
-	/* The below fields are only relevant to erasure works */
-	struct ubi_wl_entry *e;
-	int torture;
-};
+static int ubi_is_fm_block(struct ubi_device *ubi, int pnum)
+{
+	int i;
+
+	if (!ubi->fm)
+		return 0;
+
+	for (i = 0; i < ubi->fm->used_blocks; i++)
+		if (ubi->fm->e[i]->pnum == pnum)
+			return 1;
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec);
-static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e,
-				     struct rb_root *root);
+	return 0;
+}
 #else
-#define paranoid_check_ec(ubi, pnum, ec) 0
-#define paranoid_check_in_wl_tree(e, root)
+static int ubi_is_fm_block(struct ubi_device *ubi, int pnum)
+{
+	return 0;
+}
 #endif
 
 /**
@@ -210,7 +189,7 @@ static void wl_tree_add(struct ubi_wl_entry *e, struct rb_root *root)
 		struct ubi_wl_entry *e1;
 
 		parent = *p;
-		e1 = rb_entry(parent, struct ubi_wl_entry, rb);
+		e1 = rb_entry(parent, struct ubi_wl_entry, u.rb);
 
 		if (e->ec < e1->ec)
 			p = &(*p)->rb_left;
@@ -225,8 +204,8 @@ static void wl_tree_add(struct ubi_wl_entry *e, struct rb_root *root)
 		}
 	}
 
-	rb_link_node(&e->rb, parent, p);
-	rb_insert_color(&e->rb, root);
+	rb_link_node(&e->u.rb, parent, p);
+	rb_insert_color(&e->u.rb, root);
 }
 
 /**
@@ -289,18 +268,16 @@ static int produce_free_peb(struct ubi_device *ubi)
 {
 	int err;
 
-	spin_lock(&ubi->wl_lock);
 	while (!ubi->free.rb_node) {
 		spin_unlock(&ubi->wl_lock);
 
 		dbg_wl("do one work synchronously");
 		err = do_work(ubi);
-		if (err)
-			return err;
 
 		spin_lock(&ubi->wl_lock);
+		if (err)
+			return err;
 	}
-	spin_unlock(&ubi->wl_lock);
 
 	return 0;
 }
@@ -321,7 +298,7 @@ static int in_wl_tree(struct ubi_wl_entry *e, struct rb_root *root)
 	while (p) {
 		struct ubi_wl_entry *e1;
 
-		e1 = rb_entry(p, struct ubi_wl_entry, rb);
+		e1 = rb_entry(p, struct ubi_wl_entry, u.rb);
 
 		if (e->pnum == e1->pnum) {
 			ubi_assert(e == e1);
@@ -345,223 +322,401 @@ static int in_wl_tree(struct ubi_wl_entry *e, struct rb_root *root)
 }
 
 /**
- * prot_tree_add - add physical eraseblock to protection trees.
+ * prot_queue_add - add physical eraseblock to the protection queue.
  * @ubi: UBI device description object
  * @e: the physical eraseblock to add
- * @pe: protection entry object to use
- * @abs_ec: absolute erase counter value when this physical eraseblock has
- * to be removed from the protection trees.
  *
- * @wl->lock has to be locked.
+ * This function adds @e to the tail of the protection queue @ubi->pq, where
+ * @e will stay for %UBI_PROT_QUEUE_LEN erase operations and will be
+ * temporarily protected from the wear-leveling worker. Note, @wl->lock has to
+ * be locked.
  */
-static void prot_tree_add(struct ubi_device *ubi, struct ubi_wl_entry *e,
-			  struct ubi_wl_prot_entry *pe, int abs_ec)
+static void prot_queue_add(struct ubi_device *ubi, struct ubi_wl_entry *e)
 {
-	struct rb_node **p, *parent = NULL;
-	struct ubi_wl_prot_entry *pe1;
+	int pq_tail = ubi->pq_head - 1;
 
-	pe->e = e;
-	pe->abs_ec = ubi->abs_ec + abs_ec;
-
-	p = &ubi->prot.pnum.rb_node;
-	while (*p) {
-		parent = *p;
-		pe1 = rb_entry(parent, struct ubi_wl_prot_entry, rb_pnum);
-
-		if (e->pnum < pe1->e->pnum)
-			p = &(*p)->rb_left;
-		else
-			p = &(*p)->rb_right;
-	}
-	rb_link_node(&pe->rb_pnum, parent, p);
-	rb_insert_color(&pe->rb_pnum, &ubi->prot.pnum);
-
-	p = &ubi->prot.aec.rb_node;
-	parent = NULL;
-	while (*p) {
-		parent = *p;
-		pe1 = rb_entry(parent, struct ubi_wl_prot_entry, rb_aec);
-
-		if (pe->abs_ec < pe1->abs_ec)
-			p = &(*p)->rb_left;
-		else
-			p = &(*p)->rb_right;
-	}
-	rb_link_node(&pe->rb_aec, parent, p);
-	rb_insert_color(&pe->rb_aec, &ubi->prot.aec);
+	if (pq_tail < 0)
+		pq_tail = UBI_PROT_QUEUE_LEN - 1;
+	ubi_assert(pq_tail >= 0 && pq_tail < UBI_PROT_QUEUE_LEN);
+	list_add_tail(&e->u.list, &ubi->pq[pq_tail]);
+	dbg_wl("added PEB %d EC %d to the protection queue", e->pnum, e->ec);
 }
 
 /**
  * find_wl_entry - find wear-leveling entry closest to certain erase counter.
+ * @ubi: UBI device description object
  * @root: the RB-tree where to look for
- * @max: highest possible erase counter
+ * @diff: maximum possible difference from the smallest erase counter
  *
  * This function looks for a wear leveling entry with erase counter closest to
- * @max and less then @max.
+ * min + @diff, where min is the smallest erase counter.
  */
-static struct ubi_wl_entry *find_wl_entry(struct rb_root *root, int max)
+static struct ubi_wl_entry *find_wl_entry(struct ubi_device *ubi,
+					  struct rb_root *root, int diff)
 {
 	struct rb_node *p;
-	struct ubi_wl_entry *e;
+	struct ubi_wl_entry *e, *prev_e = NULL;
+	int max;
 
-	e = rb_entry(rb_first(root), struct ubi_wl_entry, rb);
-	max += e->ec;
+	e = rb_entry(rb_first(root), struct ubi_wl_entry, u.rb);
+	max = e->ec + diff;
 
 	p = root->rb_node;
 	while (p) {
 		struct ubi_wl_entry *e1;
 
-		e1 = rb_entry(p, struct ubi_wl_entry, rb);
+		e1 = rb_entry(p, struct ubi_wl_entry, u.rb);
 		if (e1->ec >= max)
 			p = p->rb_left;
 		else {
 			p = p->rb_right;
+			prev_e = e;
 			e = e1;
 		}
 	}
 
+	/* If no fastmap has been written and this WL entry can be used
+	 * as anchor PEB, hold it back and return the second best WL entry
+	 * such that fastmap can use the anchor PEB later. */
+	if (prev_e && !ubi->fm_disabled &&
+	    !ubi->fm && e->pnum < UBI_FM_MAX_START)
+		return prev_e;
+
 	return e;
 }
 
 /**
- * ubi_wl_get_peb - get a physical eraseblock.
+ * find_mean_wl_entry - find wear-leveling entry with medium erase counter.
  * @ubi: UBI device description object
- * @dtype: type of data which will be stored in this physical eraseblock
+ * @root: the RB-tree where to look for
  *
- * This function returns a physical eraseblock in case of success and a
- * negative error code in case of failure. Might sleep.
+ * This function looks for a wear leveling entry with medium erase counter,
+ * but not greater or equivalent than the lowest erase counter plus
+ * %WL_FREE_MAX_DIFF/2.
  */
-int ubi_wl_get_peb(struct ubi_device *ubi, int dtype)
+static struct ubi_wl_entry *find_mean_wl_entry(struct ubi_device *ubi,
+					       struct rb_root *root)
 {
-	int err, protect, medium_ec;
 	struct ubi_wl_entry *e, *first, *last;
-	struct ubi_wl_prot_entry *pe;
 
-	ubi_assert(dtype == UBI_LONGTERM || dtype == UBI_SHORTTERM ||
-		   dtype == UBI_UNKNOWN);
+	first = rb_entry(rb_first(root), struct ubi_wl_entry, u.rb);
+	last = rb_entry(rb_last(root), struct ubi_wl_entry, u.rb);
 
-	pe = kmalloc(sizeof(struct ubi_wl_prot_entry), GFP_NOFS);
-	if (!pe)
-		return -ENOMEM;
+	if (last->ec - first->ec < WL_FREE_MAX_DIFF) {
+		e = rb_entry(root->rb_node, struct ubi_wl_entry, u.rb);
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+		/* If no fastmap has been written and this WL entry can be used
+		 * as anchor PEB, hold it back and return the second best
+		 * WL entry such that fastmap can use the anchor PEB later. */
+		if (e && !ubi->fm_disabled && !ubi->fm &&
+		    e->pnum < UBI_FM_MAX_START)
+			e = rb_entry(rb_next(root->rb_node),
+				     struct ubi_wl_entry, u.rb);
+#endif
+	} else
+		e = find_wl_entry(ubi, root, WL_FREE_MAX_DIFF/2);
+
+	return e;
+}
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+/**
+ * find_anchor_wl_entry - find wear-leveling entry to used as anchor PEB.
+ * @root: the RB-tree where to look for
+ */
+static struct ubi_wl_entry *find_anchor_wl_entry(struct rb_root *root)
+{
+	struct rb_node *p;
+	struct ubi_wl_entry *e, *victim = NULL;
+	int max_ec = UBI_MAX_ERASECOUNTER;
+
+	ubi_rb_for_each_entry(p, e, root, u.rb) {
+		if (e->pnum < UBI_FM_MAX_START && e->ec < max_ec) {
+			victim = e;
+			max_ec = e->ec;
+		}
+	}
+
+	return victim;
+}
+
+static int anchor_pebs_avalible(struct rb_root *root)
+{
+	struct rb_node *p;
+	struct ubi_wl_entry *e;
+
+	ubi_rb_for_each_entry(p, e, root, u.rb)
+		if (e->pnum < UBI_FM_MAX_START)
+			return 1;
+
+	return 0;
+}
+
+/**
+ * ubi_wl_get_fm_peb - find a physical erase block with a given maximal number.
+ * @ubi: UBI device description object
+ * @anchor: This PEB will be used as anchor PEB by fastmap
+ *
+ * The function returns a physical erase block with a given maximal number
+ * and removes it from the wl subsystem.
+ * Must be called with wl_lock held!
+ */
+struct ubi_wl_entry *ubi_wl_get_fm_peb(struct ubi_device *ubi, int anchor)
+{
+	struct ubi_wl_entry *e = NULL;
+
+	if (!ubi->free.rb_node || (ubi->free_count - ubi->beb_rsvd_pebs < 1))
+		goto out;
+
+	if (anchor)
+		e = find_anchor_wl_entry(&ubi->free);
+	else
+		e = find_mean_wl_entry(ubi, &ubi->free);
+
+	if (!e)
+		goto out;
+
+	self_check_in_wl_tree(ubi, e, &ubi->free);
+
+	/* remove it from the free list,
+	 * the wl subsystem does no longer know this erase block */
+	rb_erase(&e->u.rb, &ubi->free);
+	ubi->free_count--;
+out:
+	return e;
+}
+#endif
+
+/**
+ * __wl_get_peb - get a physical eraseblock.
+ * @ubi: UBI device description object
+ *
+ * This function returns a physical eraseblock in case of success and a
+ * negative error code in case of failure.
+ */
+static int __wl_get_peb(struct ubi_device *ubi)
+{
+	int err;
+	struct ubi_wl_entry *e;
 
 retry:
-	spin_lock(&ubi->wl_lock);
 	if (!ubi->free.rb_node) {
 		if (ubi->works_count == 0) {
-			ubi_assert(list_empty(&ubi->works));
 			ubi_err("no free eraseblocks");
-			spin_unlock(&ubi->wl_lock);
-			kfree(pe);
+			ubi_assert(list_empty(&ubi->works));
 			return -ENOSPC;
 		}
-		spin_unlock(&ubi->wl_lock);
 
 		err = produce_free_peb(ubi);
-		if (err < 0) {
-			kfree(pe);
+		if (err < 0)
 			return err;
-		}
 		goto retry;
 	}
 
-	switch (dtype) {
-		case UBI_LONGTERM:
-			/*
-			 * For long term data we pick a physical eraseblock
-			 * with high erase counter. But the highest erase
-			 * counter we can pick is bounded by the the lowest
-			 * erase counter plus %WL_FREE_MAX_DIFF.
-			 */
-			e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
-			protect = LT_PROTECTION;
-			break;
-		case UBI_UNKNOWN:
-			/*
-			 * For unknown data we pick a physical eraseblock with
-			 * medium erase counter. But we by no means can pick a
-			 * physical eraseblock with erase counter greater or
-			 * equivalent than the lowest erase counter plus
-			 * %WL_FREE_MAX_DIFF.
-			 */
-			first = rb_entry(rb_first(&ubi->free),
-					 struct ubi_wl_entry, rb);
-			last = rb_entry(rb_last(&ubi->free),
-					struct ubi_wl_entry, rb);
-
-			if (last->ec - first->ec < WL_FREE_MAX_DIFF)
-				e = rb_entry(ubi->free.rb_node,
-						struct ubi_wl_entry, rb);
-			else {
-				medium_ec = (first->ec + WL_FREE_MAX_DIFF)/2;
-				e = find_wl_entry(&ubi->free, medium_ec);
-			}
-			protect = U_PROTECTION;
-			break;
-		case UBI_SHORTTERM:
-			/*
-			 * For short term data we pick a physical eraseblock
-			 * with the lowest erase counter as we expect it will
-			 * be erased soon.
-			 */
-			e = rb_entry(rb_first(&ubi->free),
-				     struct ubi_wl_entry, rb);
-			protect = ST_PROTECTION;
-			break;
-		default:
-			protect = 0;
-			e = NULL;
-			BUG();
+	e = find_mean_wl_entry(ubi, &ubi->free);
+	if (!e) {
+		ubi_err("no free eraseblocks");
+		return -ENOSPC;
 	}
 
+	self_check_in_wl_tree(ubi, e, &ubi->free);
+
 	/*
-	 * Move the physical eraseblock to the protection trees where it will
+	 * Move the physical eraseblock to the protection queue where it will
 	 * be protected from being moved for some time.
 	 */
-	paranoid_check_in_wl_tree(e, &ubi->free);
-	rb_erase(&e->rb, &ubi->free);
-	prot_tree_add(ubi, e, pe, protect);
+	rb_erase(&e->u.rb, &ubi->free);
+	ubi->free_count--;
+	dbg_wl("PEB %d EC %d", e->pnum, e->ec);
+#ifndef CONFIG_MTD_UBI_FASTMAP
+	/* We have to enqueue e only if fastmap is disabled,
+	 * is fastmap enabled prot_queue_add() will be called by
+	 * ubi_wl_get_peb() after removing e from the pool. */
+	prot_queue_add(ubi, e);
+#endif
+	return e->pnum;
+}
 
-	dbg_wl("PEB %d EC %d, protection %d", e->pnum, e->ec, protect);
-	spin_unlock(&ubi->wl_lock);
+#ifdef CONFIG_MTD_UBI_FASTMAP
+/**
+ * return_unused_pool_pebs - returns unused PEB to the free tree.
+ * @ubi: UBI device description object
+ * @pool: fastmap pool description object
+ */
+static void return_unused_pool_pebs(struct ubi_device *ubi,
+				    struct ubi_fm_pool *pool)
+{
+	int i;
+	struct ubi_wl_entry *e;
 
-	return e->pnum;
+	for (i = pool->used; i < pool->size; i++) {
+		e = ubi->lookuptbl[pool->pebs[i]];
+		wl_tree_add(e, &ubi->free);
+		ubi->free_count++;
+	}
 }
 
 /**
- * prot_tree_del - remove a physical eraseblock from the protection trees
+ * refill_wl_pool - refills all the fastmap pool used by the
+ * WL sub-system.
  * @ubi: UBI device description object
- * @pnum: the physical eraseblock to remove
+ */
+static void refill_wl_pool(struct ubi_device *ubi)
+{
+	struct ubi_wl_entry *e;
+	struct ubi_fm_pool *pool = &ubi->fm_wl_pool;
+
+	return_unused_pool_pebs(ubi, pool);
+
+	for (pool->size = 0; pool->size < pool->max_size; pool->size++) {
+		if (!ubi->free.rb_node ||
+		   (ubi->free_count - ubi->beb_rsvd_pebs < 5))
+			break;
+
+		e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF);
+		self_check_in_wl_tree(ubi, e, &ubi->free);
+		rb_erase(&e->u.rb, &ubi->free);
+		ubi->free_count--;
+
+		pool->pebs[pool->size] = e->pnum;
+	}
+	pool->used = 0;
+}
+
+/**
+ * refill_wl_user_pool - refills all the fastmap pool used by ubi_wl_get_peb.
+ * @ubi: UBI device description object
+ */
+static void refill_wl_user_pool(struct ubi_device *ubi)
+{
+	struct ubi_fm_pool *pool = &ubi->fm_pool;
+
+	return_unused_pool_pebs(ubi, pool);
+
+	for (pool->size = 0; pool->size < pool->max_size; pool->size++) {
+		pool->pebs[pool->size] = __wl_get_peb(ubi);
+		if (pool->pebs[pool->size] < 0)
+			break;
+	}
+	pool->used = 0;
+}
+
+/**
+ * ubi_refill_pools - refills all fastmap PEB pools.
+ * @ubi: UBI device description object
+ */
+void ubi_refill_pools(struct ubi_device *ubi)
+{
+	spin_lock(&ubi->wl_lock);
+	refill_wl_pool(ubi);
+	refill_wl_user_pool(ubi);
+	spin_unlock(&ubi->wl_lock);
+}
+
+/* ubi_wl_get_peb - works exaclty like __wl_get_peb but keeps track of
+ * the fastmap pool.
+ */
+int ubi_wl_get_peb(struct ubi_device *ubi)
+{
+	int ret;
+	struct ubi_fm_pool *pool = &ubi->fm_pool;
+	struct ubi_fm_pool *wl_pool = &ubi->fm_wl_pool;
+
+	if (!pool->size || !wl_pool->size || pool->used == pool->size ||
+	    wl_pool->used == wl_pool->size)
+		ubi_update_fastmap(ubi);
+
+	/* we got not a single free PEB */
+	if (!pool->size)
+		ret = -ENOSPC;
+	else {
+		spin_lock(&ubi->wl_lock);
+		ret = pool->pebs[pool->used++];
+		prot_queue_add(ubi, ubi->lookuptbl[ret]);
+		spin_unlock(&ubi->wl_lock);
+	}
+
+	return ret;
+}
+
+/* get_peb_for_wl - returns a PEB to be used internally by the WL sub-system.
  *
- * This function returns PEB @pnum from the protection trees and returns zero
- * in case of success and %-ENODEV if the PEB was not found in the protection
- * trees.
+ * @ubi: UBI device description object
  */
-static int prot_tree_del(struct ubi_device *ubi, int pnum)
+static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi)
 {
-	struct rb_node *p;
-	struct ubi_wl_prot_entry *pe = NULL;
+	struct ubi_fm_pool *pool = &ubi->fm_wl_pool;
+	int pnum;
+
+	if (pool->used == pool->size || !pool->size) {
+		/* We cannot update the fastmap here because this
+		 * function is called in atomic context.
+		 * Let's fail here and refill/update it as soon as possible. */
+#ifndef __UBOOT__
+		schedule_work(&ubi->fm_work);
+#else
+		/* In U-Boot we must call this directly */
+	        ubi_update_fastmap(ubi);
+#endif
+		return NULL;
+	} else {
+		pnum = pool->pebs[pool->used++];
+		return ubi->lookuptbl[pnum];
+	}
+}
+#else
+static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi)
+{
+	struct ubi_wl_entry *e;
 
-	p = ubi->prot.pnum.rb_node;
-	while (p) {
+	e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF);
+	self_check_in_wl_tree(ubi, e, &ubi->free);
+	rb_erase(&e->u.rb, &ubi->free);
 
-		pe = rb_entry(p, struct ubi_wl_prot_entry, rb_pnum);
+	return e;
+}
 
-		if (pnum == pe->e->pnum)
-			goto found;
+int ubi_wl_get_peb(struct ubi_device *ubi)
+{
+	int peb, err;
 
-		if (pnum < pe->e->pnum)
-			p = p->rb_left;
-		else
-			p = p->rb_right;
+	spin_lock(&ubi->wl_lock);
+	peb = __wl_get_peb(ubi);
+	spin_unlock(&ubi->wl_lock);
+
+	err = ubi_self_check_all_ff(ubi, peb, ubi->vid_hdr_aloffset,
+				    ubi->peb_size - ubi->vid_hdr_aloffset);
+	if (err) {
+		ubi_err("new PEB %d does not contain all 0xFF bytes", peb);
+		return err;
 	}
 
-	return -ENODEV;
+	return peb;
+}
+#endif
+
+/**
+ * prot_queue_del - remove a physical eraseblock from the protection queue.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock to remove
+ *
+ * This function deletes PEB @pnum from the protection queue and returns zero
+ * in case of success and %-ENODEV if the PEB was not found.
+ */
+static int prot_queue_del(struct ubi_device *ubi, int pnum)
+{
+	struct ubi_wl_entry *e;
 
-found:
-	ubi_assert(pe->e->pnum == pnum);
-	rb_erase(&pe->rb_aec, &ubi->prot.aec);
-	rb_erase(&pe->rb_pnum, &ubi->prot.pnum);
-	kfree(pe);
+	e = ubi->lookuptbl[pnum];
+	if (!e)
+		return -ENODEV;
+
+	if (self_check_in_pq(ubi, e))
+		return -ENODEV;
+
+	list_del(&e->u.list);
+	dbg_wl("deleted PEB %d from the protection queue", e->pnum);
 	return 0;
 }
 
@@ -574,7 +729,8 @@ found:
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-static int sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, int torture)
+static int sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
+		      int torture)
 {
 	int err;
 	struct ubi_ec_hdr *ec_hdr;
@@ -582,8 +738,8 @@ static int sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, int tortur
 
 	dbg_wl("erase PEB %d, old EC %llu", e->pnum, ec);
 
-	err = paranoid_check_ec(ubi, e->pnum, e->ec);
-	if (err > 0)
+	err = self_check_ec(ubi, e->pnum, e->ec);
+	if (err)
 		return -EINVAL;
 
 	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS);
@@ -626,105 +782,213 @@ out_free:
 }
 
 /**
- * check_protection_over - check if it is time to stop protecting some
- * physical eraseblocks.
+ * serve_prot_queue - check if it is time to stop protecting PEBs.
  * @ubi: UBI device description object
  *
- * This function is called after each erase operation, when the absolute erase
- * counter is incremented, to check if some physical eraseblock  have not to be
- * protected any longer. These physical eraseblocks are moved from the
- * protection trees to the used tree.
+ * This function is called after each erase operation and removes PEBs from the
+ * tail of the protection queue. These PEBs have been protected for long enough
+ * and should be moved to the used tree.
  */
-static void check_protection_over(struct ubi_device *ubi)
+static void serve_prot_queue(struct ubi_device *ubi)
 {
-	struct ubi_wl_prot_entry *pe;
+	struct ubi_wl_entry *e, *tmp;
+	int count;
 
 	/*
 	 * There may be several protected physical eraseblock to remove,
 	 * process them all.
 	 */
-	while (1) {
-		spin_lock(&ubi->wl_lock);
-		if (!ubi->prot.aec.rb_node) {
-			spin_unlock(&ubi->wl_lock);
-			break;
-		}
-
-		pe = rb_entry(rb_first(&ubi->prot.aec),
-			      struct ubi_wl_prot_entry, rb_aec);
+repeat:
+	count = 0;
+	spin_lock(&ubi->wl_lock);
+	list_for_each_entry_safe(e, tmp, &ubi->pq[ubi->pq_head], u.list) {
+		dbg_wl("PEB %d EC %d protection over, move to used tree",
+			e->pnum, e->ec);
 
-		if (pe->abs_ec > ubi->abs_ec) {
+		list_del(&e->u.list);
+		wl_tree_add(e, &ubi->used);
+		if (count++ > 32) {
+			/*
+			 * Let's be nice and avoid holding the spinlock for
+			 * too long.
+			 */
 			spin_unlock(&ubi->wl_lock);
-			break;
+			cond_resched();
+			goto repeat;
 		}
-
-		dbg_wl("PEB %d protection over, abs_ec %llu, PEB abs_ec %llu",
-		       pe->e->pnum, ubi->abs_ec, pe->abs_ec);
-		rb_erase(&pe->rb_aec, &ubi->prot.aec);
-		rb_erase(&pe->rb_pnum, &ubi->prot.pnum);
-		wl_tree_add(pe->e, &ubi->used);
-		spin_unlock(&ubi->wl_lock);
-
-		kfree(pe);
-		cond_resched();
 	}
+
+	ubi->pq_head += 1;
+	if (ubi->pq_head == UBI_PROT_QUEUE_LEN)
+		ubi->pq_head = 0;
+	ubi_assert(ubi->pq_head >= 0 && ubi->pq_head < UBI_PROT_QUEUE_LEN);
+	spin_unlock(&ubi->wl_lock);
 }
 
 /**
- * schedule_ubi_work - schedule a work.
+ * __schedule_ubi_work - schedule a work.
  * @ubi: UBI device description object
  * @wrk: the work to schedule
  *
- * This function enqueues a work defined by @wrk to the tail of the pending
- * works list.
+ * This function adds a work defined by @wrk to the tail of the pending works
+ * list. Can only be used of ubi->work_sem is already held in read mode!
  */
-static void schedule_ubi_work(struct ubi_device *ubi, struct ubi_work *wrk)
+static void __schedule_ubi_work(struct ubi_device *ubi, struct ubi_work *wrk)
 {
 	spin_lock(&ubi->wl_lock);
 	list_add_tail(&wrk->list, &ubi->works);
 	ubi_assert(ubi->works_count >= 0);
 	ubi->works_count += 1;
-
+#ifndef __UBOOT__
+	if (ubi->thread_enabled && !ubi_dbg_is_bgt_disabled(ubi))
+		wake_up_process(ubi->bgt_thread);
+#else
 	/*
 	 * U-Boot special: We have no bgt_thread in U-Boot!
 	 * So just call do_work() here directly.
 	 */
 	do_work(ubi);
-
+#endif
 	spin_unlock(&ubi->wl_lock);
 }
 
-static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
-			int cancel);
-
 /**
- * schedule_erase - schedule an erase work.
+ * schedule_ubi_work - schedule a work.
+ * @ubi: UBI device description object
+ * @wrk: the work to schedule
+ *
+ * This function adds a work defined by @wrk to the tail of the pending works
+ * list.
+ */
+static void schedule_ubi_work(struct ubi_device *ubi, struct ubi_work *wrk)
+{
+	down_read(&ubi->work_sem);
+	__schedule_ubi_work(ubi, wrk);
+	up_read(&ubi->work_sem);
+}
+
+static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
+			int cancel);
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+/**
+ * ubi_is_erase_work - checks whether a work is erase work.
+ * @wrk: The work object to be checked
+ */
+int ubi_is_erase_work(struct ubi_work *wrk)
+{
+	return wrk->func == erase_worker;
+}
+#endif
+
+/**
+ * schedule_erase - schedule an erase work.
+ * @ubi: UBI device description object
+ * @e: the WL entry of the physical eraseblock to erase
+ * @vol_id: the volume ID that last used this PEB
+ * @lnum: the last used logical eraseblock number for the PEB
+ * @torture: if the physical eraseblock has to be tortured
+ *
+ * This function returns zero in case of success and a %-ENOMEM in case of
+ * failure.
+ */
+static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
+			  int vol_id, int lnum, int torture)
+{
+	struct ubi_work *wl_wrk;
+
+	ubi_assert(e);
+	ubi_assert(!ubi_is_fm_block(ubi, e->pnum));
+
+	dbg_wl("schedule erasure of PEB %d, EC %d, torture %d",
+	       e->pnum, e->ec, torture);
+
+	wl_wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS);
+	if (!wl_wrk)
+		return -ENOMEM;
+
+	wl_wrk->func = &erase_worker;
+	wl_wrk->e = e;
+	wl_wrk->vol_id = vol_id;
+	wl_wrk->lnum = lnum;
+	wl_wrk->torture = torture;
+
+	schedule_ubi_work(ubi, wl_wrk);
+	return 0;
+}
+
+/**
+ * do_sync_erase - run the erase worker synchronously.
  * @ubi: UBI device description object
  * @e: the WL entry of the physical eraseblock to erase
+ * @vol_id: the volume ID that last used this PEB
+ * @lnum: the last used logical eraseblock number for the PEB
  * @torture: if the physical eraseblock has to be tortured
  *
- * This function returns zero in case of success and a %-ENOMEM in case of
- * failure.
  */
-static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
-			  int torture)
+static int do_sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
+			 int vol_id, int lnum, int torture)
 {
 	struct ubi_work *wl_wrk;
 
-	dbg_wl("schedule erasure of PEB %d, EC %d, torture %d",
-	       e->pnum, e->ec, torture);
+	dbg_wl("sync erase of PEB %i", e->pnum);
 
 	wl_wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS);
 	if (!wl_wrk)
 		return -ENOMEM;
 
-	wl_wrk->func = &erase_worker;
 	wl_wrk->e = e;
+	wl_wrk->vol_id = vol_id;
+	wl_wrk->lnum = lnum;
 	wl_wrk->torture = torture;
 
-	schedule_ubi_work(ubi, wl_wrk);
-	return 0;
+	return erase_worker(ubi, wl_wrk, 0);
+}
+
+#ifdef CONFIG_MTD_UBI_FASTMAP
+/**
+ * ubi_wl_put_fm_peb - returns a PEB used in a fastmap to the wear-leveling
+ * sub-system.
+ * see: ubi_wl_put_peb()
+ *
+ * @ubi: UBI device description object
+ * @fm_e: physical eraseblock to return
+ * @lnum: the last used logical eraseblock number for the PEB
+ * @torture: if this physical eraseblock has to be tortured
+ */
+int ubi_wl_put_fm_peb(struct ubi_device *ubi, struct ubi_wl_entry *fm_e,
+		      int lnum, int torture)
+{
+	struct ubi_wl_entry *e;
+	int vol_id, pnum = fm_e->pnum;
+
+	dbg_wl("PEB %d", pnum);
+
+	ubi_assert(pnum >= 0);
+	ubi_assert(pnum < ubi->peb_count);
+
+	spin_lock(&ubi->wl_lock);
+	e = ubi->lookuptbl[pnum];
+
+	/* This can happen if we recovered from a fastmap the very
+	 * first time and writing now a new one. In this case the wl system
+	 * has never seen any PEB used by the original fastmap.
+	 */
+	if (!e) {
+		e = fm_e;
+		ubi_assert(e->ec >= 0);
+		ubi->lookuptbl[pnum] = e;
+	} else {
+		e->ec = fm_e->ec;
+		kfree(fm_e);
+	}
+
+	spin_unlock(&ubi->wl_lock);
+
+	vol_id = lnum ? UBI_FM_DATA_VOLUME_ID : UBI_FM_SB_VOLUME_ID;
+	return schedule_erase(ubi, e, vol_id, lnum, torture);
 }
+#endif
 
 /**
  * wear_leveling_worker - wear-leveling worker function.
@@ -739,13 +1003,15 @@ static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
 static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 				int cancel)
 {
-	int err, put = 0, scrubbing = 0, protect = 0;
-	struct ubi_wl_prot_entry *uninitialized_var(pe);
+	int err, scrubbing = 0, torture = 0, protect = 0, erroneous = 0;
+	int vol_id = -1, uninitialized_var(lnum);
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	int anchor = wrk->anchor;
+#endif
 	struct ubi_wl_entry *e1, *e2;
 	struct ubi_vid_hdr *vid_hdr;
 
 	kfree(wrk);
-
 	if (cancel)
 		return 0;
 
@@ -775,36 +1041,61 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 		goto out_cancel;
 	}
 
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	/* Check whether we need to produce an anchor PEB */
+	if (!anchor)
+		anchor = !anchor_pebs_avalible(&ubi->free);
+
+	if (anchor) {
+		e1 = find_anchor_wl_entry(&ubi->used);
+		if (!e1)
+			goto out_cancel;
+		e2 = get_peb_for_wl(ubi);
+		if (!e2)
+			goto out_cancel;
+
+		self_check_in_wl_tree(ubi, e1, &ubi->used);
+		rb_erase(&e1->u.rb, &ubi->used);
+		dbg_wl("anchor-move PEB %d to PEB %d", e1->pnum, e2->pnum);
+	} else if (!ubi->scrub.rb_node) {
+#else
 	if (!ubi->scrub.rb_node) {
+#endif
 		/*
 		 * Now pick the least worn-out used physical eraseblock and a
 		 * highly worn-out free physical eraseblock. If the erase
 		 * counters differ much enough, start wear-leveling.
 		 */
-		e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, rb);
-		e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
+		e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, u.rb);
+		e2 = get_peb_for_wl(ubi);
+		if (!e2)
+			goto out_cancel;
 
 		if (!(e2->ec - e1->ec >= UBI_WL_THRESHOLD)) {
 			dbg_wl("no WL needed: min used EC %d, max free EC %d",
 			       e1->ec, e2->ec);
+
+			/* Give the unused PEB back */
+			wl_tree_add(e2, &ubi->free);
 			goto out_cancel;
 		}
-		paranoid_check_in_wl_tree(e1, &ubi->used);
-		rb_erase(&e1->rb, &ubi->used);
+		self_check_in_wl_tree(ubi, e1, &ubi->used);
+		rb_erase(&e1->u.rb, &ubi->used);
 		dbg_wl("move PEB %d EC %d to PEB %d EC %d",
 		       e1->pnum, e1->ec, e2->pnum, e2->ec);
 	} else {
 		/* Perform scrubbing */
 		scrubbing = 1;
-		e1 = rb_entry(rb_first(&ubi->scrub), struct ubi_wl_entry, rb);
-		e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
-		paranoid_check_in_wl_tree(e1, &ubi->scrub);
-		rb_erase(&e1->rb, &ubi->scrub);
+		e1 = rb_entry(rb_first(&ubi->scrub), struct ubi_wl_entry, u.rb);
+		e2 = get_peb_for_wl(ubi);
+		if (!e2)
+			goto out_cancel;
+
+		self_check_in_wl_tree(ubi, e1, &ubi->scrub);
+		rb_erase(&e1->u.rb, &ubi->scrub);
 		dbg_wl("scrub PEB %d to PEB %d", e1->pnum, e2->pnum);
 	}
 
-	paranoid_check_in_wl_tree(e2, &ubi->free);
-	rb_erase(&e2->rb, &ubi->free);
 	ubi->move_from = e1;
 	ubi->move_to = e2;
 	spin_unlock(&ubi->wl_lock);
@@ -822,81 +1113,127 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 
 	err = ubi_io_read_vid_hdr(ubi, e1->pnum, vid_hdr, 0);
 	if (err && err != UBI_IO_BITFLIPS) {
-		if (err == UBI_IO_PEB_FREE) {
+		if (err == UBI_IO_FF) {
 			/*
 			 * We are trying to move PEB without a VID header. UBI
 			 * always write VID headers shortly after the PEB was
-			 * given, so we have a situation when it did not have
-			 * chance to write it down because it was preempted.
-			 * Just re-schedule the work, so that next time it will
-			 * likely have the VID header in place.
+			 * given, so we have a situation when it has not yet
+			 * had a chance to write it, because it was preempted.
+			 * So add this PEB to the protection queue so far,
+			 * because presumably more data will be written there
+			 * (including the missing VID header), and then we'll
+			 * move it.
 			 */
 			dbg_wl("PEB %d has no VID header", e1->pnum);
+			protect = 1;
+			goto out_not_moved;
+		} else if (err == UBI_IO_FF_BITFLIPS) {
+			/*
+			 * The same situation as %UBI_IO_FF, but bit-flips were
+			 * detected. It is better to schedule this PEB for
+			 * scrubbing.
+			 */
+			dbg_wl("PEB %d has no VID header but has bit-flips",
+			       e1->pnum);
+			scrubbing = 1;
 			goto out_not_moved;
 		}
 
 		ubi_err("error %d while reading VID header from PEB %d",
 			err, e1->pnum);
-		if (err > 0)
-			err = -EIO;
 		goto out_error;
 	}
 
+	vol_id = be32_to_cpu(vid_hdr->vol_id);
+	lnum = be32_to_cpu(vid_hdr->lnum);
+
 	err = ubi_eba_copy_leb(ubi, e1->pnum, e2->pnum, vid_hdr);
 	if (err) {
-
-		if (err < 0)
-			goto out_error;
-		if (err == 1)
+		if (err == MOVE_CANCEL_RACE) {
+			/*
+			 * The LEB has not been moved because the volume is
+			 * being deleted or the PEB has been put meanwhile. We
+			 * should prevent this PEB from being selected for
+			 * wear-leveling movement again, so put it to the
+			 * protection queue.
+			 */
+			protect = 1;
+			goto out_not_moved;
+		}
+		if (err == MOVE_RETRY) {
+			scrubbing = 1;
+			goto out_not_moved;
+		}
+		if (err == MOVE_TARGET_BITFLIPS || err == MOVE_TARGET_WR_ERR ||
+		    err == MOVE_TARGET_RD_ERR) {
+			/*
+			 * Target PEB had bit-flips or write error - torture it.
+			 */
+			torture = 1;
 			goto out_not_moved;
+		}
 
-		/*
-		 * For some reason the LEB was not moved - it might be because
-		 * the volume is being deleted. We should prevent this PEB from
-		 * being selected for wear-levelling movement for some "time",
-		 * so put it to the protection tree.
-		 */
+		if (err == MOVE_SOURCE_RD_ERR) {
+			/*
+			 * An error happened while reading the source PEB. Do
+			 * not switch to R/O mode in this case, and give the
+			 * upper layers a possibility to recover from this,
+			 * e.g. by unmapping corresponding LEB. Instead, just
+			 * put this PEB to the @ubi->erroneous list to prevent
+			 * UBI from trying to move it over and over again.
+			 */
+			if (ubi->erroneous_peb_count > ubi->max_erroneous) {
+				ubi_err("too many erroneous eraseblocks (%d)",
+					ubi->erroneous_peb_count);
+				goto out_error;
+			}
+			erroneous = 1;
+			goto out_not_moved;
+		}
 
-		dbg_wl("cancelled moving PEB %d", e1->pnum);
-		pe = kmalloc(sizeof(struct ubi_wl_prot_entry), GFP_NOFS);
-		if (!pe) {
-			err = -ENOMEM;
+		if (err < 0)
 			goto out_error;
-		}
 
-		protect = 1;
+		ubi_assert(0);
 	}
 
+	/* The PEB has been successfully moved */
+	if (scrubbing)
+		ubi_msg("scrubbed PEB %d (LEB %d:%d), data moved to PEB %d",
+			e1->pnum, vol_id, lnum, e2->pnum);
 	ubi_free_vid_hdr(ubi, vid_hdr);
+
 	spin_lock(&ubi->wl_lock);
-	if (protect)
-		prot_tree_add(ubi, e1, pe, protect);
-	if (!ubi->move_to_put)
+	if (!ubi->move_to_put) {
 		wl_tree_add(e2, &ubi->used);
-	else
-		put = 1;
+		e2 = NULL;
+	}
 	ubi->move_from = ubi->move_to = NULL;
 	ubi->move_to_put = ubi->wl_scheduled = 0;
 	spin_unlock(&ubi->wl_lock);
 
-	if (put) {
+	err = do_sync_erase(ubi, e1, vol_id, lnum, 0);
+	if (err) {
+		kmem_cache_free(ubi_wl_entry_slab, e1);
+		if (e2)
+			kmem_cache_free(ubi_wl_entry_slab, e2);
+		goto out_ro;
+	}
+
+	if (e2) {
 		/*
 		 * Well, the target PEB was put meanwhile, schedule it for
 		 * erasure.
 		 */
-		dbg_wl("PEB %d was put meanwhile, erase", e2->pnum);
-		err = schedule_erase(ubi, e2, 0);
-		if (err)
-			goto out_error;
-	}
-
-	if (!protect) {
-		err = schedule_erase(ubi, e1, 0);
-		if (err)
-			goto out_error;
+		dbg_wl("PEB %d (LEB %d:%d) was put meanwhile, erase",
+		       e2->pnum, vol_id, lnum);
+		err = do_sync_erase(ubi, e2, vol_id, lnum, 0);
+		if (err) {
+			kmem_cache_free(ubi_wl_entry_slab, e2);
+			goto out_ro;
+		}
 	}
 
-
 	dbg_wl("done");
 	mutex_unlock(&ubi->move_mutex);
 	return 0;
@@ -904,42 +1241,60 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 	/*
 	 * For some reasons the LEB was not moved, might be an error, might be
 	 * something else. @e1 was not changed, so return it back. @e2 might
-	 * be changed, schedule it for erasure.
+	 * have been changed, schedule it for erasure.
 	 */
 out_not_moved:
-	ubi_free_vid_hdr(ubi, vid_hdr);
+	if (vol_id != -1)
+		dbg_wl("cancel moving PEB %d (LEB %d:%d) to PEB %d (%d)",
+		       e1->pnum, vol_id, lnum, e2->pnum, err);
+	else
+		dbg_wl("cancel moving PEB %d to PEB %d (%d)",
+		       e1->pnum, e2->pnum, err);
 	spin_lock(&ubi->wl_lock);
-	if (scrubbing)
+	if (protect)
+		prot_queue_add(ubi, e1);
+	else if (erroneous) {
+		wl_tree_add(e1, &ubi->erroneous);
+		ubi->erroneous_peb_count += 1;
+	} else if (scrubbing)
 		wl_tree_add(e1, &ubi->scrub);
 	else
 		wl_tree_add(e1, &ubi->used);
+	ubi_assert(!ubi->move_to_put);
 	ubi->move_from = ubi->move_to = NULL;
-	ubi->move_to_put = ubi->wl_scheduled = 0;
+	ubi->wl_scheduled = 0;
 	spin_unlock(&ubi->wl_lock);
 
-	err = schedule_erase(ubi, e2, 0);
-	if (err)
-		goto out_error;
-
+	ubi_free_vid_hdr(ubi, vid_hdr);
+	err = do_sync_erase(ubi, e2, vol_id, lnum, torture);
+	if (err) {
+		kmem_cache_free(ubi_wl_entry_slab, e2);
+		goto out_ro;
+	}
 	mutex_unlock(&ubi->move_mutex);
 	return 0;
 
 out_error:
-	ubi_err("error %d while moving PEB %d to PEB %d",
-		err, e1->pnum, e2->pnum);
-
-	ubi_free_vid_hdr(ubi, vid_hdr);
+	if (vol_id != -1)
+		ubi_err("error %d while moving PEB %d to PEB %d",
+			err, e1->pnum, e2->pnum);
+	else
+		ubi_err("error %d while moving PEB %d (LEB %d:%d) to PEB %d",
+			err, e1->pnum, vol_id, lnum, e2->pnum);
 	spin_lock(&ubi->wl_lock);
 	ubi->move_from = ubi->move_to = NULL;
 	ubi->move_to_put = ubi->wl_scheduled = 0;
 	spin_unlock(&ubi->wl_lock);
 
+	ubi_free_vid_hdr(ubi, vid_hdr);
 	kmem_cache_free(ubi_wl_entry_slab, e1);
 	kmem_cache_free(ubi_wl_entry_slab, e2);
-	ubi_ro_mode(ubi);
 
+out_ro:
+	ubi_ro_mode(ubi);
 	mutex_unlock(&ubi->move_mutex);
-	return err;
+	ubi_assert(err != 0);
+	return err < 0 ? err : -EIO;
 
 out_cancel:
 	ubi->wl_scheduled = 0;
@@ -952,12 +1307,13 @@ out_cancel:
 /**
  * ensure_wear_leveling - schedule wear-leveling if it is needed.
  * @ubi: UBI device description object
+ * @nested: set to non-zero if this function is called from UBI worker
  *
  * This function checks if it is time to start wear-leveling and schedules it
  * if yes. This function returns zero in case of success and a negative error
  * code in case of failure.
  */
-static int ensure_wear_leveling(struct ubi_device *ubi)
+static int ensure_wear_leveling(struct ubi_device *ubi, int nested)
 {
 	int err = 0;
 	struct ubi_wl_entry *e1;
@@ -981,11 +1337,11 @@ static int ensure_wear_leveling(struct ubi_device *ubi)
 		/*
 		 * We schedule wear-leveling only if the difference between the
 		 * lowest erase counter of used physical eraseblocks and a high
-		 * erase counter of free physical eraseblocks is greater then
+		 * erase counter of free physical eraseblocks is greater than
 		 * %UBI_WL_THRESHOLD.
 		 */
-		e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, rb);
-		e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
+		e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, u.rb);
+		e2 = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF);
 
 		if (!(e2->ec - e1->ec >= UBI_WL_THRESHOLD))
 			goto out_unlock;
@@ -1002,8 +1358,12 @@ static int ensure_wear_leveling(struct ubi_device *ubi)
 		goto out_cancel;
 	}
 
+	wrk->anchor = 0;
 	wrk->func = &wear_leveling_worker;
-	schedule_ubi_work(ubi, wrk);
+	if (nested)
+		__schedule_ubi_work(ubi, wrk);
+	else
+		schedule_ubi_work(ubi, wrk);
 	return err;
 
 out_cancel:
@@ -1014,6 +1374,38 @@ out_unlock:
 	return err;
 }
 
+#ifdef CONFIG_MTD_UBI_FASTMAP
+/**
+ * ubi_ensure_anchor_pebs - schedule wear-leveling to produce an anchor PEB.
+ * @ubi: UBI device description object
+ */
+int ubi_ensure_anchor_pebs(struct ubi_device *ubi)
+{
+	struct ubi_work *wrk;
+
+	spin_lock(&ubi->wl_lock);
+	if (ubi->wl_scheduled) {
+		spin_unlock(&ubi->wl_lock);
+		return 0;
+	}
+	ubi->wl_scheduled = 1;
+	spin_unlock(&ubi->wl_lock);
+
+	wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS);
+	if (!wrk) {
+		spin_lock(&ubi->wl_lock);
+		ubi->wl_scheduled = 0;
+		spin_unlock(&ubi->wl_lock);
+		return -ENOMEM;
+	}
+
+	wrk->anchor = 1;
+	wrk->func = &wear_leveling_worker;
+	schedule_ubi_work(ubi, wrk);
+	return 0;
+}
+#endif
+
 /**
  * erase_worker - physical eraseblock erase worker function.
  * @ubi: UBI device description object
@@ -1029,7 +1421,10 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 			int cancel)
 {
 	struct ubi_wl_entry *e = wl_wrk->e;
-	int pnum = e->pnum, err, need;
+	int pnum = e->pnum;
+	int vol_id = wl_wrk->vol_id;
+	int lnum = wl_wrk->lnum;
+	int err, available_consumed = 0;
 
 	if (cancel) {
 		dbg_wl("cancel erasure of PEB %d EC %d", pnum, e->ec);
@@ -1038,7 +1433,10 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 		return 0;
 	}
 
-	dbg_wl("erase PEB %d EC %d", pnum, e->ec);
+	dbg_wl("erase PEB %d EC %d LEB %d:%d",
+	       pnum, e->ec, wl_wrk->vol_id, wl_wrk->lnum);
+
+	ubi_assert(!ubi_is_fm_block(ubi, e->pnum));
 
 	err = sync_erase(ubi, e, wl_wrk->torture);
 	if (!err) {
@@ -1046,44 +1444,45 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 		kfree(wl_wrk);
 
 		spin_lock(&ubi->wl_lock);
-		ubi->abs_ec += 1;
 		wl_tree_add(e, &ubi->free);
+		ubi->free_count++;
 		spin_unlock(&ubi->wl_lock);
 
 		/*
-		 * One more erase operation has happened, take care about protected
-		 * physical eraseblocks.
+		 * One more erase operation has happened, take care about
+		 * protected physical eraseblocks.
 		 */
-		check_protection_over(ubi);
+		serve_prot_queue(ubi);
 
 		/* And take care about wear-leveling */
-		err = ensure_wear_leveling(ubi);
+		err = ensure_wear_leveling(ubi, 1);
 		return err;
 	}
 
 	ubi_err("failed to erase PEB %d, error %d", pnum, err);
 	kfree(wl_wrk);
-	kmem_cache_free(ubi_wl_entry_slab, e);
 
 	if (err == -EINTR || err == -ENOMEM || err == -EAGAIN ||
 	    err == -EBUSY) {
 		int err1;
 
 		/* Re-schedule the LEB for erasure */
-		err1 = schedule_erase(ubi, e, 0);
+		err1 = schedule_erase(ubi, e, vol_id, lnum, 0);
 		if (err1) {
 			err = err1;
 			goto out_ro;
 		}
 		return err;
-	} else if (err != -EIO) {
+	}
+
+	kmem_cache_free(ubi_wl_entry_slab, e);
+	if (err != -EIO)
 		/*
 		 * If this is not %-EIO, we have no idea what to do. Scheduling
 		 * this physical eraseblock for erasure again would cause
-		 * errors again and again. Well, lets switch to RO mode.
+		 * errors again and again. Well, lets switch to R/O mode.
 		 */
 		goto out_ro;
-	}
 
 	/* It is %-EIO, the PEB went bad */
 
@@ -1093,48 +1492,62 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 	}
 
 	spin_lock(&ubi->volumes_lock);
-	need = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs + 1;
-	if (need > 0) {
-		need = ubi->avail_pebs >= need ? need : ubi->avail_pebs;
-		ubi->avail_pebs -= need;
-		ubi->rsvd_pebs += need;
-		ubi->beb_rsvd_pebs += need;
-		if (need > 0)
-			ubi_msg("reserve more %d PEBs", need);
-	}
-
 	if (ubi->beb_rsvd_pebs == 0) {
-		spin_unlock(&ubi->volumes_lock);
-		ubi_err("no reserved physical eraseblocks");
-		goto out_ro;
+		if (ubi->avail_pebs == 0) {
+			spin_unlock(&ubi->volumes_lock);
+			ubi_err("no reserved/available physical eraseblocks");
+			goto out_ro;
+		}
+		ubi->avail_pebs -= 1;
+		available_consumed = 1;
 	}
-
 	spin_unlock(&ubi->volumes_lock);
-	ubi_msg("mark PEB %d as bad", pnum);
 
+	ubi_msg("mark PEB %d as bad", pnum);
 	err = ubi_io_mark_bad(ubi, pnum);
 	if (err)
 		goto out_ro;
 
 	spin_lock(&ubi->volumes_lock);
-	ubi->beb_rsvd_pebs -= 1;
+	if (ubi->beb_rsvd_pebs > 0) {
+		if (available_consumed) {
+			/*
+			 * The amount of reserved PEBs increased since we last
+			 * checked.
+			 */
+			ubi->avail_pebs += 1;
+			available_consumed = 0;
+		}
+		ubi->beb_rsvd_pebs -= 1;
+	}
 	ubi->bad_peb_count += 1;
 	ubi->good_peb_count -= 1;
 	ubi_calculate_reserved(ubi);
-	if (ubi->beb_rsvd_pebs == 0)
-		ubi_warn("last PEB from the reserved pool was used");
+	if (available_consumed)
+		ubi_warn("no PEBs in the reserved pool, used an available PEB");
+	else if (ubi->beb_rsvd_pebs)
+		ubi_msg("%d PEBs left in the reserve", ubi->beb_rsvd_pebs);
+	else
+		ubi_warn("last PEB from the reserve was used");
 	spin_unlock(&ubi->volumes_lock);
 
 	return err;
 
 out_ro:
+	if (available_consumed) {
+		spin_lock(&ubi->volumes_lock);
+		ubi->avail_pebs += 1;
+		spin_unlock(&ubi->volumes_lock);
+	}
 	ubi_ro_mode(ubi);
 	return err;
 }
 
 /**
- * ubi_wl_put_peb - return a physical eraseblock to the wear-leveling unit.
+ * ubi_wl_put_peb - return a PEB to the wear-leveling sub-system.
  * @ubi: UBI device description object
+ * @vol_id: the volume ID that last used this PEB
+ * @lnum: the last used logical eraseblock number for the PEB
  * @pnum: physical eraseblock to return
  * @torture: if this physical eraseblock has to be tortured
  *
@@ -1143,7 +1556,8 @@ out_ro:
  * occurred to this @pnum and it has to be tested. This function returns zero
  * in case of success, and a negative error code in case of failure.
  */
-int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture)
+int ubi_wl_put_peb(struct ubi_device *ubi, int vol_id, int lnum,
+		   int pnum, int torture)
 {
 	int err;
 	struct ubi_wl_entry *e;
@@ -1172,11 +1586,11 @@ retry:
 		/*
 		 * User is putting the physical eraseblock which was selected
 		 * as the target the data is moved to. It may happen if the EBA
-		 * unit already re-mapped the LEB in 'ubi_eba_copy_leb()' but
-		 * the WL unit has not put the PEB to the "used" tree yet, but
-		 * it is about to do this. So we just set a flag which will
-		 * tell the WL worker that the PEB is not needed anymore and
-		 * should be scheduled for erasure.
+		 * sub-system already re-mapped the LEB in 'ubi_eba_copy_leb()'
+		 * but the WL sub-system has not put the PEB to the "used" tree
+		 * yet, but it is about to do this. So we just set a flag which
+		 * will tell the WL worker that the PEB is not needed anymore
+		 * and should be scheduled for erasure.
 		 */
 		dbg_wl("PEB %d is the target of data moving", pnum);
 		ubi_assert(!ubi->move_to_put);
@@ -1185,13 +1599,20 @@ retry:
 		return 0;
 	} else {
 		if (in_wl_tree(e, &ubi->used)) {
-			paranoid_check_in_wl_tree(e, &ubi->used);
-			rb_erase(&e->rb, &ubi->used);
+			self_check_in_wl_tree(ubi, e, &ubi->used);
+			rb_erase(&e->u.rb, &ubi->used);
 		} else if (in_wl_tree(e, &ubi->scrub)) {
-			paranoid_check_in_wl_tree(e, &ubi->scrub);
-			rb_erase(&e->rb, &ubi->scrub);
+			self_check_in_wl_tree(ubi, e, &ubi->scrub);
+			rb_erase(&e->u.rb, &ubi->scrub);
+		} else if (in_wl_tree(e, &ubi->erroneous)) {
+			self_check_in_wl_tree(ubi, e, &ubi->erroneous);
+			rb_erase(&e->u.rb, &ubi->erroneous);
+			ubi->erroneous_peb_count -= 1;
+			ubi_assert(ubi->erroneous_peb_count >= 0);
+			/* Erroneous PEBs should be tortured */
+			torture = 1;
 		} else {
-			err = prot_tree_del(ubi, e->pnum);
+			err = prot_queue_del(ubi, e->pnum);
 			if (err) {
 				ubi_err("PEB %d not found", pnum);
 				ubi_ro_mode(ubi);
@@ -1202,7 +1623,7 @@ retry:
 	}
 	spin_unlock(&ubi->wl_lock);
 
-	err = schedule_erase(ubi, e, torture);
+	err = schedule_erase(ubi, e, vol_id, lnum, torture);
 	if (err) {
 		spin_lock(&ubi->wl_lock);
 		wl_tree_add(e, &ubi->used);
@@ -1231,7 +1652,8 @@ int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum)
 retry:
 	spin_lock(&ubi->wl_lock);
 	e = ubi->lookuptbl[pnum];
-	if (e == ubi->move_from || in_wl_tree(e, &ubi->scrub)) {
+	if (e == ubi->move_from || in_wl_tree(e, &ubi->scrub) ||
+				   in_wl_tree(e, &ubi->erroneous)) {
 		spin_unlock(&ubi->wl_lock);
 		return 0;
 	}
@@ -1250,12 +1672,12 @@ retry:
 	}
 
 	if (in_wl_tree(e, &ubi->used)) {
-		paranoid_check_in_wl_tree(e, &ubi->used);
-		rb_erase(&e->rb, &ubi->used);
+		self_check_in_wl_tree(ubi, e, &ubi->used);
+		rb_erase(&e->u.rb, &ubi->used);
 	} else {
 		int err;
 
-		err = prot_tree_del(ubi, e->pnum);
+		err = prot_queue_del(ubi, e->pnum);
 		if (err) {
 			ubi_err("PEB %d not found", pnum);
 			ubi_ro_mode(ubi);
@@ -1271,29 +1693,60 @@ retry:
 	 * Technically scrubbing is the same as wear-leveling, so it is done
 	 * by the WL worker.
 	 */
-	return ensure_wear_leveling(ubi);
+	return ensure_wear_leveling(ubi, 0);
 }
 
 /**
  * ubi_wl_flush - flush all pending works.
  * @ubi: UBI device description object
+ * @vol_id: the volume id to flush for
+ * @lnum: the logical eraseblock number to flush for
  *
- * This function returns zero in case of success and a negative error code in
- * case of failure.
+ * This function executes all pending works for a particular volume id /
+ * logical eraseblock number pair. If either value is set to %UBI_ALL, then it
+ * acts as a wildcard for all of the corresponding volume numbers or logical
+ * eraseblock numbers. It returns zero in case of success and a negative error
+ * code in case of failure.
  */
-int ubi_wl_flush(struct ubi_device *ubi)
+int ubi_wl_flush(struct ubi_device *ubi, int vol_id, int lnum)
 {
-	int err;
+	int err = 0;
+	int found = 1;
 
 	/*
-	 * Erase while the pending works queue is not empty, but not more then
+	 * Erase while the pending works queue is not empty, but not more than
 	 * the number of currently pending works.
 	 */
-	dbg_wl("flush (%d pending works)", ubi->works_count);
-	while (ubi->works_count) {
-		err = do_work(ubi);
-		if (err)
-			return err;
+	dbg_wl("flush pending work for LEB %d:%d (%d pending works)",
+	       vol_id, lnum, ubi->works_count);
+
+	while (found) {
+		struct ubi_work *wrk;
+		found = 0;
+
+		down_read(&ubi->work_sem);
+		spin_lock(&ubi->wl_lock);
+		list_for_each_entry(wrk, &ubi->works, list) {
+			if ((vol_id == UBI_ALL || wrk->vol_id == vol_id) &&
+			    (lnum == UBI_ALL || wrk->lnum == lnum)) {
+				list_del(&wrk->list);
+				ubi->works_count -= 1;
+				ubi_assert(ubi->works_count >= 0);
+				spin_unlock(&ubi->wl_lock);
+
+				err = wrk->func(ubi, wrk, 0);
+				if (err) {
+					up_read(&ubi->work_sem);
+					return err;
+				}
+
+				spin_lock(&ubi->wl_lock);
+				found = 1;
+				break;
+			}
+		}
+		spin_unlock(&ubi->wl_lock);
+		up_read(&ubi->work_sem);
 	}
 
 	/*
@@ -1303,18 +1756,7 @@ int ubi_wl_flush(struct ubi_device *ubi)
 	down_write(&ubi->work_sem);
 	up_write(&ubi->work_sem);
 
-	/*
-	 * And in case last was the WL worker and it cancelled the LEB
-	 * movement, flush again.
-	 */
-	while (ubi->works_count) {
-		dbg_wl("flush more (%d pending works)", ubi->works_count);
-		err = do_work(ubi);
-		if (err)
-			return err;
-	}
-
-	return 0;
+	return err;
 }
 
 /**
@@ -1333,11 +1775,11 @@ static void tree_destroy(struct rb_root *root)
 		else if (rb->rb_right)
 			rb = rb->rb_right;
 		else {
-			e = rb_entry(rb, struct ubi_wl_entry, rb);
+			e = rb_entry(rb, struct ubi_wl_entry, u.rb);
 
 			rb = rb_parent(rb);
 			if (rb) {
-				if (rb->rb_left == &e->rb)
+				if (rb->rb_left == &e->u.rb)
 					rb->rb_left = NULL;
 				else
 					rb->rb_right = NULL;
@@ -1372,7 +1814,7 @@ int ubi_thread(void *u)
 
 		spin_lock(&ubi->wl_lock);
 		if (list_empty(&ubi->works) || ubi->ro_mode ||
-			       !ubi->thread_enabled) {
+		    !ubi->thread_enabled || ubi_dbg_is_bgt_disabled(ubi)) {
 			set_current_state(TASK_INTERRUPTIBLE);
 			spin_unlock(&ubi->wl_lock);
 			schedule();
@@ -1392,7 +1834,8 @@ int ubi_thread(void *u)
 				ubi_msg("%s: %d consecutive failures",
 					ubi->bgt_name, WL_MAX_FAILURES);
 				ubi_ro_mode(ubi);
-				break;
+				ubi->thread_enabled = 0;
+				continue;
 			}
 		} else
 			failures = 0;
@@ -1422,30 +1865,32 @@ static void cancel_pending(struct ubi_device *ubi)
 }
 
 /**
- * ubi_wl_init_scan - initialize the wear-leveling unit using scanning
- * information.
+ * ubi_wl_init - initialize the WL sub-system using attaching information.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * This function returns zero in case of success, and a negative error code in
  * case of failure.
  */
-int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
+int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
 {
-	int err;
+	int err, i, reserved_pebs, found_pebs = 0;
 	struct rb_node *rb1, *rb2;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *seb, *tmp;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb, *tmp;
 	struct ubi_wl_entry *e;
 
-
-	ubi->used = ubi->free = ubi->scrub = RB_ROOT;
-	ubi->prot.pnum = ubi->prot.aec = RB_ROOT;
+	ubi->used = ubi->erroneous = ubi->free = ubi->scrub = RB_ROOT;
 	spin_lock_init(&ubi->wl_lock);
 	mutex_init(&ubi->move_mutex);
 	init_rwsem(&ubi->work_sem);
-	ubi->max_ec = si->max_ec;
+	ubi->max_ec = ai->max_ec;
 	INIT_LIST_HEAD(&ubi->works);
+#ifndef __UBOOT__
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	INIT_WORK(&ubi->fm_work, update_fastmap_work_fn);
+#endif
+#endif
 
 	sprintf(ubi->bgt_name, UBI_BGT_NAME_PATTERN, ubi->ubi_num);
 
@@ -1454,64 +1899,63 @@ int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 	if (!ubi->lookuptbl)
 		return err;
 
-	list_for_each_entry_safe(seb, tmp, &si->erase, u.list) {
+	for (i = 0; i < UBI_PROT_QUEUE_LEN; i++)
+		INIT_LIST_HEAD(&ubi->pq[i]);
+	ubi->pq_head = 0;
+
+	list_for_each_entry_safe(aeb, tmp, &ai->erase, u.list) {
 		cond_resched();
 
 		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
 		if (!e)
 			goto out_free;
 
-		e->pnum = seb->pnum;
-		e->ec = seb->ec;
+		e->pnum = aeb->pnum;
+		e->ec = aeb->ec;
+		ubi_assert(!ubi_is_fm_block(ubi, e->pnum));
 		ubi->lookuptbl[e->pnum] = e;
-		if (schedule_erase(ubi, e, 0)) {
+		if (schedule_erase(ubi, e, aeb->vol_id, aeb->lnum, 0)) {
 			kmem_cache_free(ubi_wl_entry_slab, e);
 			goto out_free;
 		}
+
+		found_pebs++;
 	}
 
-	list_for_each_entry(seb, &si->free, u.list) {
+	ubi->free_count = 0;
+	list_for_each_entry(aeb, &ai->free, u.list) {
 		cond_resched();
 
 		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
 		if (!e)
 			goto out_free;
 
-		e->pnum = seb->pnum;
-		e->ec = seb->ec;
+		e->pnum = aeb->pnum;
+		e->ec = aeb->ec;
 		ubi_assert(e->ec >= 0);
-		wl_tree_add(e, &ubi->free);
-		ubi->lookuptbl[e->pnum] = e;
-	}
-
-	list_for_each_entry(seb, &si->corr, u.list) {
-		cond_resched();
+		ubi_assert(!ubi_is_fm_block(ubi, e->pnum));
 
-		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
-		if (!e)
-			goto out_free;
+		wl_tree_add(e, &ubi->free);
+		ubi->free_count++;
 
-		e->pnum = seb->pnum;
-		e->ec = seb->ec;
 		ubi->lookuptbl[e->pnum] = e;
-		if (schedule_erase(ubi, e, 0)) {
-			kmem_cache_free(ubi_wl_entry_slab, e);
-			goto out_free;
-		}
+
+		found_pebs++;
 	}
 
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb) {
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) {
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb) {
 			cond_resched();
 
 			e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
 			if (!e)
 				goto out_free;
 
-			e->pnum = seb->pnum;
-			e->ec = seb->ec;
+			e->pnum = aeb->pnum;
+			e->ec = aeb->ec;
 			ubi->lookuptbl[e->pnum] = e;
-			if (!seb->scrub) {
+
+			if (!aeb->scrub) {
 				dbg_wl("add PEB %d EC %d to the used tree",
 				       e->pnum, e->ec);
 				wl_tree_add(e, &ubi->used);
@@ -1520,20 +1964,38 @@ int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 				       e->pnum, e->ec);
 				wl_tree_add(e, &ubi->scrub);
 			}
+
+			found_pebs++;
 		}
 	}
 
-	if (ubi->avail_pebs < WL_RESERVED_PEBS) {
+	dbg_wl("found %i PEBs", found_pebs);
+
+	if (ubi->fm)
+		ubi_assert(ubi->good_peb_count == \
+			   found_pebs + ubi->fm->used_blocks);
+	else
+		ubi_assert(ubi->good_peb_count == found_pebs);
+
+	reserved_pebs = WL_RESERVED_PEBS;
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	/* Reserve enough LEBs to store two fastmaps. */
+	reserved_pebs += (ubi->fm_size / ubi->leb_size) * 2;
+#endif
+
+	if (ubi->avail_pebs < reserved_pebs) {
 		ubi_err("no enough physical eraseblocks (%d, need %d)",
-			ubi->avail_pebs, WL_RESERVED_PEBS);
-		err = -ENOSPC;
+			ubi->avail_pebs, reserved_pebs);
+		if (ubi->corr_peb_count)
+			ubi_err("%d PEBs are corrupted and not used",
+				ubi->corr_peb_count);
 		goto out_free;
 	}
-	ubi->avail_pebs -= WL_RESERVED_PEBS;
-	ubi->rsvd_pebs += WL_RESERVED_PEBS;
+	ubi->avail_pebs -= reserved_pebs;
+	ubi->rsvd_pebs += reserved_pebs;
 
 	/* Schedule wear-leveling if needed */
-	err = ensure_wear_leveling(ubi);
+	err = ensure_wear_leveling(ubi, 0);
 	if (err)
 		goto out_free;
 
@@ -1549,72 +2011,57 @@ out_free:
 }
 
 /**
- * protection_trees_destroy - destroy the protection RB-trees.
+ * protection_queue_destroy - destroy the protection queue.
  * @ubi: UBI device description object
  */
-static void protection_trees_destroy(struct ubi_device *ubi)
+static void protection_queue_destroy(struct ubi_device *ubi)
 {
-	struct rb_node *rb;
-	struct ubi_wl_prot_entry *pe;
-
-	rb = ubi->prot.aec.rb_node;
-	while (rb) {
-		if (rb->rb_left)
-			rb = rb->rb_left;
-		else if (rb->rb_right)
-			rb = rb->rb_right;
-		else {
-			pe = rb_entry(rb, struct ubi_wl_prot_entry, rb_aec);
-
-			rb = rb_parent(rb);
-			if (rb) {
-				if (rb->rb_left == &pe->rb_aec)
-					rb->rb_left = NULL;
-				else
-					rb->rb_right = NULL;
-			}
+	int i;
+	struct ubi_wl_entry *e, *tmp;
 
-			kmem_cache_free(ubi_wl_entry_slab, pe->e);
-			kfree(pe);
+	for (i = 0; i < UBI_PROT_QUEUE_LEN; ++i) {
+		list_for_each_entry_safe(e, tmp, &ubi->pq[i], u.list) {
+			list_del(&e->u.list);
+			kmem_cache_free(ubi_wl_entry_slab, e);
 		}
 	}
 }
 
 /**
- * ubi_wl_close - close the wear-leveling unit.
+ * ubi_wl_close - close the wear-leveling sub-system.
  * @ubi: UBI device description object
  */
 void ubi_wl_close(struct ubi_device *ubi)
 {
-	dbg_wl("close the UBI wear-leveling unit");
-
+	dbg_wl("close the WL sub-system");
 	cancel_pending(ubi);
-	protection_trees_destroy(ubi);
+	protection_queue_destroy(ubi);
 	tree_destroy(&ubi->used);
+	tree_destroy(&ubi->erroneous);
 	tree_destroy(&ubi->free);
 	tree_destroy(&ubi->scrub);
 	kfree(ubi->lookuptbl);
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-
 /**
- * paranoid_check_ec - make sure that the erase counter of a physical eraseblock
- * is correct.
+ * self_check_ec - make sure that the erase counter of a PEB is correct.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  * @ec: the erase counter to check
  *
  * This function returns zero if the erase counter of physical eraseblock @pnum
- * is equivalent to @ec, %1 if not, and a negative error code if an error
+ * is equivalent to @ec, and a negative error code if not or if an error
  * occurred.
  */
-static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec)
+static int self_check_ec(struct ubi_device *ubi, int pnum, int ec)
 {
 	int err;
 	long long read_ec;
 	struct ubi_ec_hdr *ec_hdr;
 
+	if (!ubi_dbg_chk_gen(ubi))
+		return 0;
+
 	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS);
 	if (!ec_hdr)
 		return -ENOMEM;
@@ -1627,10 +2074,10 @@ static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec)
 	}
 
 	read_ec = be64_to_cpu(ec_hdr->ec);
-	if (ec != read_ec) {
-		ubi_err("paranoid check failed for PEB %d", pnum);
+	if (ec != read_ec && read_ec - ec > 1) {
+		ubi_err("self-check failed for PEB %d", pnum);
 		ubi_err("read EC is %lld, should be %d", read_ec, ec);
-		ubi_dbg_dump_stack();
+		dump_stack();
 		err = 1;
 	} else
 		err = 0;
@@ -1641,24 +2088,53 @@ out_free:
 }
 
 /**
- * paranoid_check_in_wl_tree - make sure that a wear-leveling entry is present
- * in a WL RB-tree.
+ * self_check_in_wl_tree - check that wear-leveling entry is in WL RB-tree.
+ * @ubi: UBI device description object
  * @e: the wear-leveling entry to check
  * @root: the root of the tree
  *
- * This function returns zero if @e is in the @root RB-tree and %1 if it
+ * This function returns zero if @e is in the @root RB-tree and %-EINVAL if it
  * is not.
  */
-static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e,
-				     struct rb_root *root)
+static int self_check_in_wl_tree(const struct ubi_device *ubi,
+				 struct ubi_wl_entry *e, struct rb_root *root)
 {
+	if (!ubi_dbg_chk_gen(ubi))
+		return 0;
+
 	if (in_wl_tree(e, root))
 		return 0;
 
-	ubi_err("paranoid check failed for PEB %d, EC %d, RB-tree %p ",
+	ubi_err("self-check failed for PEB %d, EC %d, RB-tree %p ",
 		e->pnum, e->ec, root);
-	ubi_dbg_dump_stack();
-	return 1;
+	dump_stack();
+	return -EINVAL;
 }
 
-#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
+/**
+ * self_check_in_pq - check if wear-leveling entry is in the protection
+ *                        queue.
+ * @ubi: UBI device description object
+ * @e: the wear-leveling entry to check
+ *
+ * This function returns zero if @e is in @ubi->pq and %-EINVAL if it is not.
+ */
+static int self_check_in_pq(const struct ubi_device *ubi,
+			    struct ubi_wl_entry *e)
+{
+	struct ubi_wl_entry *p;
+	int i;
+
+	if (!ubi_dbg_chk_gen(ubi))
+		return 0;
+
+	for (i = 0; i < UBI_PROT_QUEUE_LEN; ++i)
+		list_for_each_entry(p, &ubi->pq[i], u.list)
+			if (p == e)
+				return 0;
+
+	ubi_err("self-check failed for PEB %d, EC %d, Protect queue",
+		e->pnum, e->ec);
+	dump_stack();
+	return -EINVAL;
+}
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index cc6cc1f..d0dd29f 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -25,15 +25,10 @@
 
 #define atomic_read
 extern struct platform_data brd;
-#define spin_lock(x)
-#define spin_unlock(x)
 
 
 unsigned packet_received, packet_sent;
 
-#define GFP_ATOMIC ((gfp_t) 0)
-#define GFP_KERNEL ((gfp_t) 0)
-
 /*
  * Ethernet gadget driver -- with CDC and non-CDC options
  * Builds on hardware support for a full duplex link.
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 7430074..d3e8a85 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -267,11 +267,6 @@ struct interrupt_data {
 #define ASCQ(x)		((u8) (x))
 
 struct device_attribute { int i; };
-struct rw_semaphore { int i; };
-#define down_write(...)			do { } while (0)
-#define up_write(...)			do { } while (0)
-#define down_read(...)			do { } while (0)
-#define up_read(...)			do { } while (0)
 #define ETOOSMALL	525
 
 #include <usb_mass_storage.h>
diff --git a/drivers/usb/musb-new/linux-compat.h b/drivers/usb/musb-new/linux-compat.h
index d7a5663..46f83d9 100644
--- a/drivers/usb/musb-new/linux-compat.h
+++ b/drivers/usb/musb-new/linux-compat.h
@@ -5,39 +5,6 @@
 #include <linux/list.h>
 #include <linux/compat.h>
 
-#define __init
-#define __devinit
-#define __devinitdata
-#define __devinitconst
-#define __iomem
-#define __deprecated
-
-struct unused {};
-typedef struct unused unused_t;
-
-typedef int irqreturn_t;
-typedef unused_t spinlock_t;
-
-struct work_struct {};
-
-struct timer_list {};
-struct notifier_block {};
-
-typedef unsigned long dmaaddr_t;
-
-#define spin_lock_init(lock) do {} while (0)
-#define spin_lock(lock) do {} while (0)
-#define spin_unlock(lock) do {} while (0)
-#define spin_lock_irqsave(lock, flags) do {} while (0)
-#define spin_unlock_irqrestore(lock, flags) do {} while (0)
-
-#define setup_timer(timer, func, data) do {} while (0)
-#define del_timer_sync(timer) do {} while (0)
-#define schedule_work(work) do {} while (0)
-#define INIT_WORK(work, fun) do {} while (0)
-
-#define cpu_relax() do {} while (0)
-
 #define pr_debug(fmt, args...) debug(fmt, ##args)
 
 #define WARN(condition, fmt, args...) ({	\
@@ -46,21 +13,6 @@ typedef unsigned long dmaaddr_t;
 		printf(fmt, ##args);		\
 	ret_warn; })
 
-#define pm_runtime_get_sync(dev) do {} while (0)
-#define pm_runtime_put(dev) do {} while (0)
-#define pm_runtime_put_sync(dev) do {} while (0)
-#define pm_runtime_use_autosuspend(dev) do {} while (0)
-#define pm_runtime_set_autosuspend_delay(dev, delay) do {} while (0)
-#define pm_runtime_enable(dev) do {} while (0)
-
-#define MODULE_DESCRIPTION(desc)
-#define MODULE_AUTHOR(author)
-#define MODULE_LICENSE(license)
-#define MODULE_ALIAS(alias)
-#define module_param(name, type, perm)
-#define MODULE_PARM_DESC(name, desc)
-#define EXPORT_SYMBOL_GPL(name)
-
 #define writesl(a, d, s) __raw_writesl((unsigned long)a, d, s)
 #define readsl(a, d, s) __raw_readsl((unsigned long)a, d, s)
 #define writesw(a, d, s) __raw_writesw((unsigned long)a, d, s)
@@ -68,16 +20,6 @@ typedef unsigned long dmaaddr_t;
 #define writesb(a, d, s) __raw_writesb((unsigned long)a, d, s)
 #define readsb(a, d, s) __raw_readsb((unsigned long)a, d, s)
 
-#define IRQ_NONE 0
-#define IRQ_HANDLED 0
-
-#define dev_set_drvdata(dev, data) do {} while (0)
-
-#define disable_irq_wake(irq) do {} while (0)
-#define enable_irq_wake(irq) -EINVAL
-#define free_irq(irq, data) do {} while (0)
-#define request_irq(nr, f, flags, nm, data) 0
-
 #define device_init_wakeup(dev, a) do {} while (0)
 
 #define platform_data device_data
diff --git a/drivers/video/exynos_dp.c b/drivers/video/exynos_dp.c
index 682483f..f60b060 100644
--- a/drivers/video/exynos_dp.c
+++ b/drivers/video/exynos_dp.c
@@ -9,6 +9,7 @@
 #include <config.h>
 #include <common.h>
 #include <malloc.h>
+#include <linux/compat.h>
 #include <linux/err.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/cpu.h>
diff --git a/drivers/video/exynos_mipi_dsi.c b/drivers/video/exynos_mipi_dsi.c
index 7dd4652..c68ebd6 100644
--- a/drivers/video/exynos_mipi_dsi.c
+++ b/drivers/video/exynos_mipi_dsi.c
@@ -11,6 +11,7 @@
 #include <malloc.h>
 #include <fdtdec.h>
 #include <libfdt.h>
+#include <linux/compat.h>
 #include <linux/err.h>
 #include <asm/arch/dsim.h>
 #include <asm/arch/mipi_dsim.h>
diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index 85377ea..9ed4017 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Adrian Hunter
  *          Artem Bityutskiy (Битюцкий Артём)
@@ -31,32 +20,171 @@
  */
 
 #include "ubifs.h"
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/writeback.h>
+#else
+#include <linux/err.h>
+#endif
 #include <linux/math64.h>
 
+/*
+ * When pessimistic budget calculations say that there is no enough space,
+ * UBIFS starts writing back dirty inodes and pages, doing garbage collection,
+ * or committing. The below constant defines maximum number of times UBIFS
+ * repeats the operations.
+ */
+#define MAX_MKSPC_RETRIES 3
+
+/*
+ * The below constant defines amount of dirty pages which should be written
+ * back at when trying to shrink the liability.
+ */
+#define NR_TO_WRITE 16
+
+#ifndef __UBOOT__
+/**
+ * shrink_liability - write-back some dirty pages/inodes.
+ * @c: UBIFS file-system description object
+ * @nr_to_write: how many dirty pages to write-back
+ *
+ * This function shrinks UBIFS liability by means of writing back some amount
+ * of dirty inodes and their pages.
+ *
+ * Note, this function synchronizes even VFS inodes which are locked
+ * (@i_mutex) by the caller of the budgeting function, because write-back does
+ * not touch @i_mutex.
+ */
+static void shrink_liability(struct ubifs_info *c, int nr_to_write)
+{
+	down_read(&c->vfs_sb->s_umount);
+	writeback_inodes_sb(c->vfs_sb, WB_REASON_FS_FREE_SPACE);
+	up_read(&c->vfs_sb->s_umount);
+}
+
+/**
+ * run_gc - run garbage collector.
+ * @c: UBIFS file-system description object
+ *
+ * This function runs garbage collector to make some more free space. Returns
+ * zero if a free LEB has been produced, %-EAGAIN if commit is required, and a
+ * negative error code in case of failure.
+ */
+static int run_gc(struct ubifs_info *c)
+{
+	int err, lnum;
+
+	/* Make some free space by garbage-collecting dirty space */
+	down_read(&c->commit_sem);
+	lnum = ubifs_garbage_collect(c, 1);
+	up_read(&c->commit_sem);
+	if (lnum < 0)
+		return lnum;
+
+	/* GC freed one LEB, return it to lprops */
+	dbg_budg("GC freed LEB %d", lnum);
+	err = ubifs_return_leb(c, lnum);
+	if (err)
+		return err;
+	return 0;
+}
+
 /**
- * ubifs_calc_min_idx_lebs - calculate amount of eraseblocks for the index.
+ * get_liability - calculate current liability.
  * @c: UBIFS file-system description object
  *
- * This function calculates and returns the number of eraseblocks which should
- * be kept for index usage.
+ * This function calculates and returns current UBIFS liability, i.e. the
+ * amount of bytes UBIFS has "promised" to write to the media.
+ */
+static long long get_liability(struct ubifs_info *c)
+{
+	long long liab;
+
+	spin_lock(&c->space_lock);
+	liab = c->bi.idx_growth + c->bi.data_growth + c->bi.dd_growth;
+	spin_unlock(&c->space_lock);
+	return liab;
+}
+
+/**
+ * make_free_space - make more free space on the file-system.
+ * @c: UBIFS file-system description object
+ *
+ * This function is called when an operation cannot be budgeted because there
+ * is supposedly no free space. But in most cases there is some free space:
+ *   o budgeting is pessimistic, so it always budgets more than it is actually
+ *     needed, so shrinking the liability is one way to make free space - the
+ *     cached data will take less space then it was budgeted for;
+ *   o GC may turn some dark space into free space (budgeting treats dark space
+ *     as not available);
+ *   o commit may free some LEB, i.e., turn freeable LEBs into free LEBs.
+ *
+ * So this function tries to do the above. Returns %-EAGAIN if some free space
+ * was presumably made and the caller has to re-try budgeting the operation.
+ * Returns %-ENOSPC if it couldn't do more free space, and other negative error
+ * codes on failures.
+ */
+static int make_free_space(struct ubifs_info *c)
+{
+	int err, retries = 0;
+	long long liab1, liab2;
+
+	do {
+		liab1 = get_liability(c);
+		/*
+		 * We probably have some dirty pages or inodes (liability), try
+		 * to write them back.
+		 */
+		dbg_budg("liability %lld, run write-back", liab1);
+		shrink_liability(c, NR_TO_WRITE);
+
+		liab2 = get_liability(c);
+		if (liab2 < liab1)
+			return -EAGAIN;
+
+		dbg_budg("new liability %lld (not shrunk)", liab2);
+
+		/* Liability did not shrink again, try GC */
+		dbg_budg("Run GC");
+		err = run_gc(c);
+		if (!err)
+			return -EAGAIN;
+
+		if (err != -EAGAIN && err != -ENOSPC)
+			/* Some real error happened */
+			return err;
+
+		dbg_budg("Run commit (retries %d)", retries);
+		err = ubifs_run_commit(c);
+		if (err)
+			return err;
+	} while (retries++ < MAX_MKSPC_RETRIES);
+
+	return -ENOSPC;
+}
+#endif
+
+/**
+ * ubifs_calc_min_idx_lebs - calculate amount of LEBs for the index.
+ * @c: UBIFS file-system description object
+ *
+ * This function calculates and returns the number of LEBs which should be kept
+ * for index usage.
  */
 int ubifs_calc_min_idx_lebs(struct ubifs_info *c)
 {
-	int idx_lebs, eff_leb_size = c->leb_size - c->max_idx_node_sz;
+	int idx_lebs;
 	long long idx_size;
 
-	idx_size = c->old_idx_sz + c->budg_idx_growth + c->budg_uncommitted_idx;
-
+	idx_size = c->bi.old_idx_sz + c->bi.idx_growth + c->bi.uncommitted_idx;
 	/* And make sure we have thrice the index size of space reserved */
-	idx_size = idx_size + (idx_size << 1);
-
+	idx_size += idx_size << 1;
 	/*
 	 * We do not maintain 'old_idx_size' as 'old_idx_lebs'/'old_idx_bytes'
 	 * pair, nor similarly the two variables for the new index size, so we
 	 * have to do this costly 64-bit division on fast-path.
 	 */
-	idx_size += eff_leb_size - 1;
-	idx_lebs = div_u64(idx_size, eff_leb_size);
+	idx_lebs = div_u64(idx_size + c->idx_leb_size - 1, c->idx_leb_size);
 	/*
 	 * The index head is not available for the in-the-gaps method, so add an
 	 * extra LEB to compensate.
@@ -67,6 +195,424 @@ int ubifs_calc_min_idx_lebs(struct ubifs_info *c)
 	return idx_lebs;
 }
 
+#ifndef __UBOOT__
+/**
+ * ubifs_calc_available - calculate available FS space.
+ * @c: UBIFS file-system description object
+ * @min_idx_lebs: minimum number of LEBs reserved for the index
+ *
+ * This function calculates and returns amount of FS space available for use.
+ */
+long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs)
+{
+	int subtract_lebs;
+	long long available;
+
+	available = c->main_bytes - c->lst.total_used;
+
+	/*
+	 * Now 'available' contains theoretically available flash space
+	 * assuming there is no index, so we have to subtract the space which
+	 * is reserved for the index.
+	 */
+	subtract_lebs = min_idx_lebs;
+
+	/* Take into account that GC reserves one LEB for its own needs */
+	subtract_lebs += 1;
+
+	/*
+	 * The GC journal head LEB is not really accessible. And since
+	 * different write types go to different heads, we may count only on
+	 * one head's space.
+	 */
+	subtract_lebs += c->jhead_cnt - 1;
+
+	/* We also reserve one LEB for deletions, which bypass budgeting */
+	subtract_lebs += 1;
+
+	available -= (long long)subtract_lebs * c->leb_size;
+
+	/* Subtract the dead space which is not available for use */
+	available -= c->lst.total_dead;
+
+	/*
+	 * Subtract dark space, which might or might not be usable - it depends
+	 * on the data which we have on the media and which will be written. If
+	 * this is a lot of uncompressed or not-compressible data, the dark
+	 * space cannot be used.
+	 */
+	available -= c->lst.total_dark;
+
+	/*
+	 * However, there is more dark space. The index may be bigger than
+	 * @min_idx_lebs. Those extra LEBs are assumed to be available, but
+	 * their dark space is not included in total_dark, so it is subtracted
+	 * here.
+	 */
+	if (c->lst.idx_lebs > min_idx_lebs) {
+		subtract_lebs = c->lst.idx_lebs - min_idx_lebs;
+		available -= subtract_lebs * c->dark_wm;
+	}
+
+	/* The calculations are rough and may end up with a negative number */
+	return available > 0 ? available : 0;
+}
+
+/**
+ * can_use_rp - check whether the user is allowed to use reserved pool.
+ * @c: UBIFS file-system description object
+ *
+ * UBIFS has so-called "reserved pool" which is flash space reserved
+ * for the superuser and for uses whose UID/GID is recorded in UBIFS superblock.
+ * This function checks whether current user is allowed to use reserved pool.
+ * Returns %1  current user is allowed to use reserved pool and %0 otherwise.
+ */
+static int can_use_rp(struct ubifs_info *c)
+{
+	if (uid_eq(current_fsuid(), c->rp_uid) || capable(CAP_SYS_RESOURCE) ||
+	    (!gid_eq(c->rp_gid, GLOBAL_ROOT_GID) && in_group_p(c->rp_gid)))
+		return 1;
+	return 0;
+}
+
+/**
+ * do_budget_space - reserve flash space for index and data growth.
+ * @c: UBIFS file-system description object
+ *
+ * This function makes sure UBIFS has enough free LEBs for index growth and
+ * data.
+ *
+ * When budgeting index space, UBIFS reserves thrice as many LEBs as the index
+ * would take if it was consolidated and written to the flash. This guarantees
+ * that the "in-the-gaps" commit method always succeeds and UBIFS will always
+ * be able to commit dirty index. So this function basically adds amount of
+ * budgeted index space to the size of the current index, multiplies this by 3,
+ * and makes sure this does not exceed the amount of free LEBs.
+ *
+ * Notes about @c->bi.min_idx_lebs and @c->lst.idx_lebs variables:
+ * o @c->lst.idx_lebs is the number of LEBs the index currently uses. It might
+ *    be large, because UBIFS does not do any index consolidation as long as
+ *    there is free space. IOW, the index may take a lot of LEBs, but the LEBs
+ *    will contain a lot of dirt.
+ * o @c->bi.min_idx_lebs is the number of LEBS the index presumably takes. IOW,
+ *    the index may be consolidated to take up to @c->bi.min_idx_lebs LEBs.
+ *
+ * This function returns zero in case of success, and %-ENOSPC in case of
+ * failure.
+ */
+static int do_budget_space(struct ubifs_info *c)
+{
+	long long outstanding, available;
+	int lebs, rsvd_idx_lebs, min_idx_lebs;
+
+	/* First budget index space */
+	min_idx_lebs = ubifs_calc_min_idx_lebs(c);
+
+	/* Now 'min_idx_lebs' contains number of LEBs to reserve */
+	if (min_idx_lebs > c->lst.idx_lebs)
+		rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
+	else
+		rsvd_idx_lebs = 0;
+
+	/*
+	 * The number of LEBs that are available to be used by the index is:
+	 *
+	 *    @c->lst.empty_lebs + @c->freeable_cnt + @c->idx_gc_cnt -
+	 *    @c->lst.taken_empty_lebs
+	 *
+	 * @c->lst.empty_lebs are available because they are empty.
+	 * @c->freeable_cnt are available because they contain only free and
+	 * dirty space, @c->idx_gc_cnt are available because they are index
+	 * LEBs that have been garbage collected and are awaiting the commit
+	 * before they can be used. And the in-the-gaps method will grab these
+	 * if it needs them. @c->lst.taken_empty_lebs are empty LEBs that have
+	 * already been allocated for some purpose.
+	 *
+	 * Note, @c->idx_gc_cnt is included to both @c->lst.empty_lebs (because
+	 * these LEBs are empty) and to @c->lst.taken_empty_lebs (because they
+	 * are taken until after the commit).
+	 *
+	 * Note, @c->lst.taken_empty_lebs may temporarily be higher by one
+	 * because of the way we serialize LEB allocations and budgeting. See a
+	 * comment in 'ubifs_find_free_space()'.
+	 */
+	lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
+	       c->lst.taken_empty_lebs;
+	if (unlikely(rsvd_idx_lebs > lebs)) {
+		dbg_budg("out of indexing space: min_idx_lebs %d (old %d), rsvd_idx_lebs %d",
+			 min_idx_lebs, c->bi.min_idx_lebs, rsvd_idx_lebs);
+		return -ENOSPC;
+	}
+
+	available = ubifs_calc_available(c, min_idx_lebs);
+	outstanding = c->bi.data_growth + c->bi.dd_growth;
+
+	if (unlikely(available < outstanding)) {
+		dbg_budg("out of data space: available %lld, outstanding %lld",
+			 available, outstanding);
+		return -ENOSPC;
+	}
+
+	if (available - outstanding <= c->rp_size && !can_use_rp(c))
+		return -ENOSPC;
+
+	c->bi.min_idx_lebs = min_idx_lebs;
+	return 0;
+}
+
+/**
+ * calc_idx_growth - calculate approximate index growth from budgeting request.
+ * @c: UBIFS file-system description object
+ * @req: budgeting request
+ *
+ * For now we assume each new node adds one znode. But this is rather poor
+ * approximation, though.
+ */
+static int calc_idx_growth(const struct ubifs_info *c,
+			   const struct ubifs_budget_req *req)
+{
+	int znodes;
+
+	znodes = req->new_ino + (req->new_page << UBIFS_BLOCKS_PER_PAGE_SHIFT) +
+		 req->new_dent;
+	return znodes * c->max_idx_node_sz;
+}
+
+/**
+ * calc_data_growth - calculate approximate amount of new data from budgeting
+ * request.
+ * @c: UBIFS file-system description object
+ * @req: budgeting request
+ */
+static int calc_data_growth(const struct ubifs_info *c,
+			    const struct ubifs_budget_req *req)
+{
+	int data_growth;
+
+	data_growth = req->new_ino  ? c->bi.inode_budget : 0;
+	if (req->new_page)
+		data_growth += c->bi.page_budget;
+	if (req->new_dent)
+		data_growth += c->bi.dent_budget;
+	data_growth += req->new_ino_d;
+	return data_growth;
+}
+
+/**
+ * calc_dd_growth - calculate approximate amount of data which makes other data
+ * dirty from budgeting request.
+ * @c: UBIFS file-system description object
+ * @req: budgeting request
+ */
+static int calc_dd_growth(const struct ubifs_info *c,
+			  const struct ubifs_budget_req *req)
+{
+	int dd_growth;
+
+	dd_growth = req->dirtied_page ? c->bi.page_budget : 0;
+
+	if (req->dirtied_ino)
+		dd_growth += c->bi.inode_budget << (req->dirtied_ino - 1);
+	if (req->mod_dent)
+		dd_growth += c->bi.dent_budget;
+	dd_growth += req->dirtied_ino_d;
+	return dd_growth;
+}
+
+/**
+ * ubifs_budget_space - ensure there is enough space to complete an operation.
+ * @c: UBIFS file-system description object
+ * @req: budget request
+ *
+ * This function allocates budget for an operation. It uses pessimistic
+ * approximation of how much flash space the operation needs. The goal of this
+ * function is to make sure UBIFS always has flash space to flush all dirty
+ * pages, dirty inodes, and dirty znodes (liability). This function may force
+ * commit, garbage-collection or write-back. Returns zero in case of success,
+ * %-ENOSPC if there is no free space and other negative error codes in case of
+ * failures.
+ */
+int ubifs_budget_space(struct ubifs_info *c, struct ubifs_budget_req *req)
+{
+	int uninitialized_var(cmt_retries), uninitialized_var(wb_retries);
+	int err, idx_growth, data_growth, dd_growth, retried = 0;
+
+	ubifs_assert(req->new_page <= 1);
+	ubifs_assert(req->dirtied_page <= 1);
+	ubifs_assert(req->new_dent <= 1);
+	ubifs_assert(req->mod_dent <= 1);
+	ubifs_assert(req->new_ino <= 1);
+	ubifs_assert(req->new_ino_d <= UBIFS_MAX_INO_DATA);
+	ubifs_assert(req->dirtied_ino <= 4);
+	ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4);
+	ubifs_assert(!(req->new_ino_d & 7));
+	ubifs_assert(!(req->dirtied_ino_d & 7));
+
+	data_growth = calc_data_growth(c, req);
+	dd_growth = calc_dd_growth(c, req);
+	if (!data_growth && !dd_growth)
+		return 0;
+	idx_growth = calc_idx_growth(c, req);
+
+again:
+	spin_lock(&c->space_lock);
+	ubifs_assert(c->bi.idx_growth >= 0);
+	ubifs_assert(c->bi.data_growth >= 0);
+	ubifs_assert(c->bi.dd_growth >= 0);
+
+	if (unlikely(c->bi.nospace) && (c->bi.nospace_rp || !can_use_rp(c))) {
+		dbg_budg("no space");
+		spin_unlock(&c->space_lock);
+		return -ENOSPC;
+	}
+
+	c->bi.idx_growth += idx_growth;
+	c->bi.data_growth += data_growth;
+	c->bi.dd_growth += dd_growth;
+
+	err = do_budget_space(c);
+	if (likely(!err)) {
+		req->idx_growth = idx_growth;
+		req->data_growth = data_growth;
+		req->dd_growth = dd_growth;
+		spin_unlock(&c->space_lock);
+		return 0;
+	}
+
+	/* Restore the old values */
+	c->bi.idx_growth -= idx_growth;
+	c->bi.data_growth -= data_growth;
+	c->bi.dd_growth -= dd_growth;
+	spin_unlock(&c->space_lock);
+
+	if (req->fast) {
+		dbg_budg("no space for fast budgeting");
+		return err;
+	}
+
+	err = make_free_space(c);
+	cond_resched();
+	if (err == -EAGAIN) {
+		dbg_budg("try again");
+		goto again;
+	} else if (err == -ENOSPC) {
+		if (!retried) {
+			retried = 1;
+			dbg_budg("-ENOSPC, but anyway try once again");
+			goto again;
+		}
+		dbg_budg("FS is full, -ENOSPC");
+		c->bi.nospace = 1;
+		if (can_use_rp(c) || c->rp_size == 0)
+			c->bi.nospace_rp = 1;
+		smp_wmb();
+	} else
+		ubifs_err("cannot budget space, error %d", err);
+	return err;
+}
+
+/**
+ * ubifs_release_budget - release budgeted free space.
+ * @c: UBIFS file-system description object
+ * @req: budget request
+ *
+ * This function releases the space budgeted by 'ubifs_budget_space()'. Note,
+ * since the index changes (which were budgeted for in @req->idx_growth) will
+ * only be written to the media on commit, this function moves the index budget
+ * from @c->bi.idx_growth to @c->bi.uncommitted_idx. The latter will be zeroed
+ * by the commit operation.
+ */
+void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req)
+{
+	ubifs_assert(req->new_page <= 1);
+	ubifs_assert(req->dirtied_page <= 1);
+	ubifs_assert(req->new_dent <= 1);
+	ubifs_assert(req->mod_dent <= 1);
+	ubifs_assert(req->new_ino <= 1);
+	ubifs_assert(req->new_ino_d <= UBIFS_MAX_INO_DATA);
+	ubifs_assert(req->dirtied_ino <= 4);
+	ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4);
+	ubifs_assert(!(req->new_ino_d & 7));
+	ubifs_assert(!(req->dirtied_ino_d & 7));
+	if (!req->recalculate) {
+		ubifs_assert(req->idx_growth >= 0);
+		ubifs_assert(req->data_growth >= 0);
+		ubifs_assert(req->dd_growth >= 0);
+	}
+
+	if (req->recalculate) {
+		req->data_growth = calc_data_growth(c, req);
+		req->dd_growth = calc_dd_growth(c, req);
+		req->idx_growth = calc_idx_growth(c, req);
+	}
+
+	if (!req->data_growth && !req->dd_growth)
+		return;
+
+	c->bi.nospace = c->bi.nospace_rp = 0;
+	smp_wmb();
+
+	spin_lock(&c->space_lock);
+	c->bi.idx_growth -= req->idx_growth;
+	c->bi.uncommitted_idx += req->idx_growth;
+	c->bi.data_growth -= req->data_growth;
+	c->bi.dd_growth -= req->dd_growth;
+	c->bi.min_idx_lebs = ubifs_calc_min_idx_lebs(c);
+
+	ubifs_assert(c->bi.idx_growth >= 0);
+	ubifs_assert(c->bi.data_growth >= 0);
+	ubifs_assert(c->bi.dd_growth >= 0);
+	ubifs_assert(c->bi.min_idx_lebs < c->main_lebs);
+	ubifs_assert(!(c->bi.idx_growth & 7));
+	ubifs_assert(!(c->bi.data_growth & 7));
+	ubifs_assert(!(c->bi.dd_growth & 7));
+	spin_unlock(&c->space_lock);
+}
+
+/**
+ * ubifs_convert_page_budget - convert budget of a new page.
+ * @c: UBIFS file-system description object
+ *
+ * This function converts budget which was allocated for a new page of data to
+ * the budget of changing an existing page of data. The latter is smaller than
+ * the former, so this function only does simple re-calculation and does not
+ * involve any write-back.
+ */
+void ubifs_convert_page_budget(struct ubifs_info *c)
+{
+	spin_lock(&c->space_lock);
+	/* Release the index growth reservation */
+	c->bi.idx_growth -= c->max_idx_node_sz << UBIFS_BLOCKS_PER_PAGE_SHIFT;
+	/* Release the data growth reservation */
+	c->bi.data_growth -= c->bi.page_budget;
+	/* Increase the dirty data growth reservation instead */
+	c->bi.dd_growth += c->bi.page_budget;
+	/* And re-calculate the indexing space reservation */
+	c->bi.min_idx_lebs = ubifs_calc_min_idx_lebs(c);
+	spin_unlock(&c->space_lock);
+}
+
+/**
+ * ubifs_release_dirty_inode_budget - release dirty inode budget.
+ * @c: UBIFS file-system description object
+ * @ui: UBIFS inode to release the budget for
+ *
+ * This function releases budget corresponding to a dirty inode. It is usually
+ * called when after the inode has been written to the media and marked as
+ * clean. It also causes the "no space" flags to be cleared.
+ */
+void ubifs_release_dirty_inode_budget(struct ubifs_info *c,
+				      struct ubifs_inode *ui)
+{
+	struct ubifs_budget_req req;
+
+	memset(&req, 0, sizeof(struct ubifs_budget_req));
+	/* The "no space" flags will be cleared because dd_growth is > 0 */
+	req.dd_growth = c->bi.inode_budget + ALIGN(ui->data_len, 8);
+	ubifs_release_budget(c, &req);
+}
+#endif
+
 /**
  * ubifs_reported_space - calculate reported free space.
  * @c: the UBIFS file-system description object
@@ -111,3 +657,75 @@ long long ubifs_reported_space(const struct ubifs_info *c, long long free)
 	free *= factor;
 	return div_u64(free, divisor);
 }
+
+#ifndef __UBOOT__
+/**
+ * ubifs_get_free_space_nolock - return amount of free space.
+ * @c: UBIFS file-system description object
+ *
+ * This function calculates amount of free space to report to user-space.
+ *
+ * Because UBIFS may introduce substantial overhead (the index, node headers,
+ * alignment, wastage at the end of LEBs, etc), it cannot report real amount of
+ * free flash space it has (well, because not all dirty space is reclaimable,
+ * UBIFS does not actually know the real amount). If UBIFS did so, it would
+ * bread user expectations about what free space is. Users seem to accustomed
+ * to assume that if the file-system reports N bytes of free space, they would
+ * be able to fit a file of N bytes to the FS. This almost works for
+ * traditional file-systems, because they have way less overhead than UBIFS.
+ * So, to keep users happy, UBIFS tries to take the overhead into account.
+ */
+long long ubifs_get_free_space_nolock(struct ubifs_info *c)
+{
+	int rsvd_idx_lebs, lebs;
+	long long available, outstanding, free;
+
+	ubifs_assert(c->bi.min_idx_lebs == ubifs_calc_min_idx_lebs(c));
+	outstanding = c->bi.data_growth + c->bi.dd_growth;
+	available = ubifs_calc_available(c, c->bi.min_idx_lebs);
+
+	/*
+	 * When reporting free space to user-space, UBIFS guarantees that it is
+	 * possible to write a file of free space size. This means that for
+	 * empty LEBs we may use more precise calculations than
+	 * 'ubifs_calc_available()' is using. Namely, we know that in empty
+	 * LEBs we would waste only @c->leb_overhead bytes, not @c->dark_wm.
+	 * Thus, amend the available space.
+	 *
+	 * Note, the calculations below are similar to what we have in
+	 * 'do_budget_space()', so refer there for comments.
+	 */
+	if (c->bi.min_idx_lebs > c->lst.idx_lebs)
+		rsvd_idx_lebs = c->bi.min_idx_lebs - c->lst.idx_lebs;
+	else
+		rsvd_idx_lebs = 0;
+	lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
+	       c->lst.taken_empty_lebs;
+	lebs -= rsvd_idx_lebs;
+	available += lebs * (c->dark_wm - c->leb_overhead);
+
+	if (available > outstanding)
+		free = ubifs_reported_space(c, available - outstanding);
+	else
+		free = 0;
+	return free;
+}
+
+/**
+ * ubifs_get_free_space - return amount of free space.
+ * @c: UBIFS file-system description object
+ *
+ * This function calculates and returns amount of free space to report to
+ * user-space.
+ */
+long long ubifs_get_free_space(struct ubifs_info *c)
+{
+	long long free;
+
+	spin_lock(&c->space_lock);
+	free = ubifs_get_free_space_nolock(c);
+	spin_unlock(&c->space_lock);
+
+	return free;
+}
+#endif
diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c
index 6afb883..9cf9f12 100644
--- a/fs/ubifs/debug.c
+++ b/fs/ubifs/debug.c
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Artem Bityutskiy (Битюцкий Артём)
  *          Adrian Hunter
@@ -27,28 +16,51 @@
  * various local functions of those subsystems.
  */
 
-#define UBIFS_DBG_PRESERVE_UBI
-
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/math64.h>
+#include <linux/uaccess.h>
+#include <linux/random.h>
+#else
+#include <linux/compat.h>
+#include <linux/err.h>
+#endif
 #include "ubifs.h"
 
-#ifdef CONFIG_UBIFS_FS_DEBUG
-
-DEFINE_SPINLOCK(dbg_lock);
+#ifndef __UBOOT__
+static DEFINE_SPINLOCK(dbg_lock);
+#endif
 
-static char dbg_key_buf0[128];
-static char dbg_key_buf1[128];
+struct helper {
+	int pid;
+};
 
-unsigned int ubifs_msg_flags = UBIFS_MSG_FLAGS_DEFAULT;
-unsigned int ubifs_chk_flags = UBIFS_CHK_FLAGS_DEFAULT;
-unsigned int ubifs_tst_flags;
+static struct helper currenthelp = { .pid = 1 };
+static struct helper *current = &currenthelp;
 
-module_param_named(debug_msgs, ubifs_msg_flags, uint, S_IRUGO | S_IWUSR);
-module_param_named(debug_chks, ubifs_chk_flags, uint, S_IRUGO | S_IWUSR);
-module_param_named(debug_tsts, ubifs_tst_flags, uint, S_IRUGO | S_IWUSR);
+static const char *get_key_fmt(int fmt)
+{
+	switch (fmt) {
+	case UBIFS_SIMPLE_KEY_FMT:
+		return "simple";
+	default:
+		return "unknown/invalid format";
+	}
+}
 
-MODULE_PARM_DESC(debug_msgs, "Debug message type flags");
-MODULE_PARM_DESC(debug_chks, "Debug check flags");
-MODULE_PARM_DESC(debug_tsts, "Debug special test flags");
+static const char *get_key_hash(int hash)
+{
+	switch (hash) {
+	case UBIFS_KEY_HASH_R5:
+		return "R5";
+	case UBIFS_KEY_HASH_TEST:
+		return "test";
+	default:
+		return "unknown/invalid name hash";
+	}
+}
 
 static const char *get_key_type(int type)
 {
@@ -68,8 +80,32 @@ static const char *get_key_type(int type)
 	}
 }
 
-static void sprintf_key(const struct ubifs_info *c, const union ubifs_key *key,
-			char *buffer)
+#ifndef __UBOOT__
+static const char *get_dent_type(int type)
+{
+	switch (type) {
+	case UBIFS_ITYPE_REG:
+		return "file";
+	case UBIFS_ITYPE_DIR:
+		return "dir";
+	case UBIFS_ITYPE_LNK:
+		return "symlink";
+	case UBIFS_ITYPE_BLK:
+		return "blkdev";
+	case UBIFS_ITYPE_CHR:
+		return "char dev";
+	case UBIFS_ITYPE_FIFO:
+		return "fifo";
+	case UBIFS_ITYPE_SOCK:
+		return "socket";
+	default:
+		return "unknown/invalid type";
+	}
+}
+#endif
+
+const char *dbg_snprintf_key(const struct ubifs_info *c,
+			     const union ubifs_key *key, char *buffer, int len)
 {
 	char *p = buffer;
 	int type = key_type(c, key);
@@ -77,80 +113,3038 @@ static void sprintf_key(const struct ubifs_info *c, const union ubifs_key *key,
 	if (c->key_fmt == UBIFS_SIMPLE_KEY_FMT) {
 		switch (type) {
 		case UBIFS_INO_KEY:
-			sprintf(p, "(%lu, %s)", (unsigned long)key_inum(c, key),
-			       get_key_type(type));
+			len -= snprintf(p, len, "(%lu, %s)",
+					(unsigned long)key_inum(c, key),
+					get_key_type(type));
 			break;
 		case UBIFS_DENT_KEY:
 		case UBIFS_XENT_KEY:
-			sprintf(p, "(%lu, %s, %#08x)",
-				(unsigned long)key_inum(c, key),
-				get_key_type(type), key_hash(c, key));
+			len -= snprintf(p, len, "(%lu, %s, %#08x)",
+					(unsigned long)key_inum(c, key),
+					get_key_type(type), key_hash(c, key));
 			break;
 		case UBIFS_DATA_KEY:
-			sprintf(p, "(%lu, %s, %u)",
-				(unsigned long)key_inum(c, key),
-				get_key_type(type), key_block(c, key));
+			len -= snprintf(p, len, "(%lu, %s, %u)",
+					(unsigned long)key_inum(c, key),
+					get_key_type(type), key_block(c, key));
 			break;
 		case UBIFS_TRUN_KEY:
-			sprintf(p, "(%lu, %s)",
-				(unsigned long)key_inum(c, key),
-				get_key_type(type));
+			len -= snprintf(p, len, "(%lu, %s)",
+					(unsigned long)key_inum(c, key),
+					get_key_type(type));
 			break;
 		default:
-			sprintf(p, "(bad key type: %#08x, %#08x)",
-				key->u32[0], key->u32[1]);
+			len -= snprintf(p, len, "(bad key type: %#08x, %#08x)",
+					key->u32[0], key->u32[1]);
 		}
 	} else
-		sprintf(p, "bad key format %d", c->key_fmt);
+		len -= snprintf(p, len, "bad key format %d", c->key_fmt);
+	ubifs_assert(len > 0);
+	return p;
+}
+
+const char *dbg_ntype(int type)
+{
+	switch (type) {
+	case UBIFS_PAD_NODE:
+		return "padding node";
+	case UBIFS_SB_NODE:
+		return "superblock node";
+	case UBIFS_MST_NODE:
+		return "master node";
+	case UBIFS_REF_NODE:
+		return "reference node";
+	case UBIFS_INO_NODE:
+		return "inode node";
+	case UBIFS_DENT_NODE:
+		return "direntry node";
+	case UBIFS_XENT_NODE:
+		return "xentry node";
+	case UBIFS_DATA_NODE:
+		return "data node";
+	case UBIFS_TRUN_NODE:
+		return "truncate node";
+	case UBIFS_IDX_NODE:
+		return "indexing node";
+	case UBIFS_CS_NODE:
+		return "commit start node";
+	case UBIFS_ORPH_NODE:
+		return "orphan node";
+	default:
+		return "unknown node";
+	}
+}
+
+static const char *dbg_gtype(int type)
+{
+	switch (type) {
+	case UBIFS_NO_NODE_GROUP:
+		return "no node group";
+	case UBIFS_IN_NODE_GROUP:
+		return "in node group";
+	case UBIFS_LAST_OF_NODE_GROUP:
+		return "last of node group";
+	default:
+		return "unknown";
+	}
+}
+
+const char *dbg_cstate(int cmt_state)
+{
+	switch (cmt_state) {
+	case COMMIT_RESTING:
+		return "commit resting";
+	case COMMIT_BACKGROUND:
+		return "background commit requested";
+	case COMMIT_REQUIRED:
+		return "commit required";
+	case COMMIT_RUNNING_BACKGROUND:
+		return "BACKGROUND commit running";
+	case COMMIT_RUNNING_REQUIRED:
+		return "commit running and required";
+	case COMMIT_BROKEN:
+		return "broken commit";
+	default:
+		return "unknown commit state";
+	}
+}
+
+const char *dbg_jhead(int jhead)
+{
+	switch (jhead) {
+	case GCHD:
+		return "0 (GC)";
+	case BASEHD:
+		return "1 (base)";
+	case DATAHD:
+		return "2 (data)";
+	default:
+		return "unknown journal head";
+	}
+}
+
+static void dump_ch(const struct ubifs_ch *ch)
+{
+	pr_err("\tmagic          %#x\n", le32_to_cpu(ch->magic));
+	pr_err("\tcrc            %#x\n", le32_to_cpu(ch->crc));
+	pr_err("\tnode_type      %d (%s)\n", ch->node_type,
+	       dbg_ntype(ch->node_type));
+	pr_err("\tgroup_type     %d (%s)\n", ch->group_type,
+	       dbg_gtype(ch->group_type));
+	pr_err("\tsqnum          %llu\n",
+	       (unsigned long long)le64_to_cpu(ch->sqnum));
+	pr_err("\tlen            %u\n", le32_to_cpu(ch->len));
+}
+
+void ubifs_dump_inode(struct ubifs_info *c, const struct inode *inode)
+{
+#ifndef __UBOOT__
+	const struct ubifs_inode *ui = ubifs_inode(inode);
+	struct qstr nm = { .name = NULL };
+	union ubifs_key key;
+	struct ubifs_dent_node *dent, *pdent = NULL;
+	int count = 2;
+
+	pr_err("Dump in-memory inode:");
+	pr_err("\tinode          %lu\n", inode->i_ino);
+	pr_err("\tsize           %llu\n",
+	       (unsigned long long)i_size_read(inode));
+	pr_err("\tnlink          %u\n", inode->i_nlink);
+	pr_err("\tuid            %u\n", (unsigned int)i_uid_read(inode));
+	pr_err("\tgid            %u\n", (unsigned int)i_gid_read(inode));
+	pr_err("\tatime          %u.%u\n",
+	       (unsigned int)inode->i_atime.tv_sec,
+	       (unsigned int)inode->i_atime.tv_nsec);
+	pr_err("\tmtime          %u.%u\n",
+	       (unsigned int)inode->i_mtime.tv_sec,
+	       (unsigned int)inode->i_mtime.tv_nsec);
+	pr_err("\tctime          %u.%u\n",
+	       (unsigned int)inode->i_ctime.tv_sec,
+	       (unsigned int)inode->i_ctime.tv_nsec);
+	pr_err("\tcreat_sqnum    %llu\n", ui->creat_sqnum);
+	pr_err("\txattr_size     %u\n", ui->xattr_size);
+	pr_err("\txattr_cnt      %u\n", ui->xattr_cnt);
+	pr_err("\txattr_names    %u\n", ui->xattr_names);
+	pr_err("\tdirty          %u\n", ui->dirty);
+	pr_err("\txattr          %u\n", ui->xattr);
+	pr_err("\tbulk_read      %u\n", ui->xattr);
+	pr_err("\tsynced_i_size  %llu\n",
+	       (unsigned long long)ui->synced_i_size);
+	pr_err("\tui_size        %llu\n",
+	       (unsigned long long)ui->ui_size);
+	pr_err("\tflags          %d\n", ui->flags);
+	pr_err("\tcompr_type     %d\n", ui->compr_type);
+	pr_err("\tlast_page_read %lu\n", ui->last_page_read);
+	pr_err("\tread_in_a_row  %lu\n", ui->read_in_a_row);
+	pr_err("\tdata_len       %d\n", ui->data_len);
+
+	if (!S_ISDIR(inode->i_mode))
+		return;
+
+	pr_err("List of directory entries:\n");
+	ubifs_assert(!mutex_is_locked(&c->tnc_mutex));
+
+	lowest_dent_key(c, &key, inode->i_ino);
+	while (1) {
+		dent = ubifs_tnc_next_ent(c, &key, &nm);
+		if (IS_ERR(dent)) {
+			if (PTR_ERR(dent) != -ENOENT)
+				pr_err("error %ld\n", PTR_ERR(dent));
+			break;
+		}
+
+		pr_err("\t%d: %s (%s)\n",
+		       count++, dent->name, get_dent_type(dent->type));
+
+		nm.name = dent->name;
+		nm.len = le16_to_cpu(dent->nlen);
+		kfree(pdent);
+		pdent = dent;
+		key_read(c, &dent->key, &key);
+	}
+	kfree(pdent);
+#endif
+}
+
+void ubifs_dump_node(const struct ubifs_info *c, const void *node)
+{
+	int i, n;
+	union ubifs_key key;
+	const struct ubifs_ch *ch = node;
+	char key_buf[DBG_KEY_BUF_LEN];
+
+	/* If the magic is incorrect, just hexdump the first bytes */
+	if (le32_to_cpu(ch->magic) != UBIFS_NODE_MAGIC) {
+		pr_err("Not a node, first %zu bytes:", UBIFS_CH_SZ);
+		print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 32, 1,
+			       (void *)node, UBIFS_CH_SZ, 1);
+		return;
+	}
+
+	spin_lock(&dbg_lock);
+	dump_ch(node);
+
+	switch (ch->node_type) {
+	case UBIFS_PAD_NODE:
+	{
+		const struct ubifs_pad_node *pad = node;
+
+		pr_err("\tpad_len        %u\n", le32_to_cpu(pad->pad_len));
+		break;
+	}
+	case UBIFS_SB_NODE:
+	{
+		const struct ubifs_sb_node *sup = node;
+		unsigned int sup_flags = le32_to_cpu(sup->flags);
+
+		pr_err("\tkey_hash       %d (%s)\n",
+		       (int)sup->key_hash, get_key_hash(sup->key_hash));
+		pr_err("\tkey_fmt        %d (%s)\n",
+		       (int)sup->key_fmt, get_key_fmt(sup->key_fmt));
+		pr_err("\tflags          %#x\n", sup_flags);
+		pr_err("\t  big_lpt      %u\n",
+		       !!(sup_flags & UBIFS_FLG_BIGLPT));
+		pr_err("\t  space_fixup  %u\n",
+		       !!(sup_flags & UBIFS_FLG_SPACE_FIXUP));
+		pr_err("\tmin_io_size    %u\n", le32_to_cpu(sup->min_io_size));
+		pr_err("\tleb_size       %u\n", le32_to_cpu(sup->leb_size));
+		pr_err("\tleb_cnt        %u\n", le32_to_cpu(sup->leb_cnt));
+		pr_err("\tmax_leb_cnt    %u\n", le32_to_cpu(sup->max_leb_cnt));
+		pr_err("\tmax_bud_bytes  %llu\n",
+		       (unsigned long long)le64_to_cpu(sup->max_bud_bytes));
+		pr_err("\tlog_lebs       %u\n", le32_to_cpu(sup->log_lebs));
+		pr_err("\tlpt_lebs       %u\n", le32_to_cpu(sup->lpt_lebs));
+		pr_err("\torph_lebs      %u\n", le32_to_cpu(sup->orph_lebs));
+		pr_err("\tjhead_cnt      %u\n", le32_to_cpu(sup->jhead_cnt));
+		pr_err("\tfanout         %u\n", le32_to_cpu(sup->fanout));
+		pr_err("\tlsave_cnt      %u\n", le32_to_cpu(sup->lsave_cnt));
+		pr_err("\tdefault_compr  %u\n",
+		       (int)le16_to_cpu(sup->default_compr));
+		pr_err("\trp_size        %llu\n",
+		       (unsigned long long)le64_to_cpu(sup->rp_size));
+		pr_err("\trp_uid         %u\n", le32_to_cpu(sup->rp_uid));
+		pr_err("\trp_gid         %u\n", le32_to_cpu(sup->rp_gid));
+		pr_err("\tfmt_version    %u\n", le32_to_cpu(sup->fmt_version));
+		pr_err("\ttime_gran      %u\n", le32_to_cpu(sup->time_gran));
+		pr_err("\tUUID           %pUB\n", sup->uuid);
+		break;
+	}
+	case UBIFS_MST_NODE:
+	{
+		const struct ubifs_mst_node *mst = node;
+
+		pr_err("\thighest_inum   %llu\n",
+		       (unsigned long long)le64_to_cpu(mst->highest_inum));
+		pr_err("\tcommit number  %llu\n",
+		       (unsigned long long)le64_to_cpu(mst->cmt_no));
+		pr_err("\tflags          %#x\n", le32_to_cpu(mst->flags));
+		pr_err("\tlog_lnum       %u\n", le32_to_cpu(mst->log_lnum));
+		pr_err("\troot_lnum      %u\n", le32_to_cpu(mst->root_lnum));
+		pr_err("\troot_offs      %u\n", le32_to_cpu(mst->root_offs));
+		pr_err("\troot_len       %u\n", le32_to_cpu(mst->root_len));
+		pr_err("\tgc_lnum        %u\n", le32_to_cpu(mst->gc_lnum));
+		pr_err("\tihead_lnum     %u\n", le32_to_cpu(mst->ihead_lnum));
+		pr_err("\tihead_offs     %u\n", le32_to_cpu(mst->ihead_offs));
+		pr_err("\tindex_size     %llu\n",
+		       (unsigned long long)le64_to_cpu(mst->index_size));
+		pr_err("\tlpt_lnum       %u\n", le32_to_cpu(mst->lpt_lnum));
+		pr_err("\tlpt_offs       %u\n", le32_to_cpu(mst->lpt_offs));
+		pr_err("\tnhead_lnum     %u\n", le32_to_cpu(mst->nhead_lnum));
+		pr_err("\tnhead_offs     %u\n", le32_to_cpu(mst->nhead_offs));
+		pr_err("\tltab_lnum      %u\n", le32_to_cpu(mst->ltab_lnum));
+		pr_err("\tltab_offs      %u\n", le32_to_cpu(mst->ltab_offs));
+		pr_err("\tlsave_lnum     %u\n", le32_to_cpu(mst->lsave_lnum));
+		pr_err("\tlsave_offs     %u\n", le32_to_cpu(mst->lsave_offs));
+		pr_err("\tlscan_lnum     %u\n", le32_to_cpu(mst->lscan_lnum));
+		pr_err("\tleb_cnt        %u\n", le32_to_cpu(mst->leb_cnt));
+		pr_err("\tempty_lebs     %u\n", le32_to_cpu(mst->empty_lebs));
+		pr_err("\tidx_lebs       %u\n", le32_to_cpu(mst->idx_lebs));
+		pr_err("\ttotal_free     %llu\n",
+		       (unsigned long long)le64_to_cpu(mst->total_free));
+		pr_err("\ttotal_dirty    %llu\n",
+		       (unsigned long long)le64_to_cpu(mst->total_dirty));
+		pr_err("\ttotal_used     %llu\n",
+		       (unsigned long long)le64_to_cpu(mst->total_used));
+		pr_err("\ttotal_dead     %llu\n",
+		       (unsigned long long)le64_to_cpu(mst->total_dead));
+		pr_err("\ttotal_dark     %llu\n",
+		       (unsigned long long)le64_to_cpu(mst->total_dark));
+		break;
+	}
+	case UBIFS_REF_NODE:
+	{
+		const struct ubifs_ref_node *ref = node;
+
+		pr_err("\tlnum           %u\n", le32_to_cpu(ref->lnum));
+		pr_err("\toffs           %u\n", le32_to_cpu(ref->offs));
+		pr_err("\tjhead          %u\n", le32_to_cpu(ref->jhead));
+		break;
+	}
+	case UBIFS_INO_NODE:
+	{
+		const struct ubifs_ino_node *ino = node;
+
+		key_read(c, &ino->key, &key);
+		pr_err("\tkey            %s\n",
+		       dbg_snprintf_key(c, &key, key_buf, DBG_KEY_BUF_LEN));
+		pr_err("\tcreat_sqnum    %llu\n",
+		       (unsigned long long)le64_to_cpu(ino->creat_sqnum));
+		pr_err("\tsize           %llu\n",
+		       (unsigned long long)le64_to_cpu(ino->size));
+		pr_err("\tnlink          %u\n", le32_to_cpu(ino->nlink));
+		pr_err("\tatime          %lld.%u\n",
+		       (long long)le64_to_cpu(ino->atime_sec),
+		       le32_to_cpu(ino->atime_nsec));
+		pr_err("\tmtime          %lld.%u\n",
+		       (long long)le64_to_cpu(ino->mtime_sec),
+		       le32_to_cpu(ino->mtime_nsec));
+		pr_err("\tctime          %lld.%u\n",
+		       (long long)le64_to_cpu(ino->ctime_sec),
+		       le32_to_cpu(ino->ctime_nsec));
+		pr_err("\tuid            %u\n", le32_to_cpu(ino->uid));
+		pr_err("\tgid            %u\n", le32_to_cpu(ino->gid));
+		pr_err("\tmode           %u\n", le32_to_cpu(ino->mode));
+		pr_err("\tflags          %#x\n", le32_to_cpu(ino->flags));
+		pr_err("\txattr_cnt      %u\n", le32_to_cpu(ino->xattr_cnt));
+		pr_err("\txattr_size     %u\n", le32_to_cpu(ino->xattr_size));
+		pr_err("\txattr_names    %u\n", le32_to_cpu(ino->xattr_names));
+		pr_err("\tcompr_type     %#x\n",
+		       (int)le16_to_cpu(ino->compr_type));
+		pr_err("\tdata len       %u\n", le32_to_cpu(ino->data_len));
+		break;
+	}
+	case UBIFS_DENT_NODE:
+	case UBIFS_XENT_NODE:
+	{
+		const struct ubifs_dent_node *dent = node;
+		int nlen = le16_to_cpu(dent->nlen);
+
+		key_read(c, &dent->key, &key);
+		pr_err("\tkey            %s\n",
+		       dbg_snprintf_key(c, &key, key_buf, DBG_KEY_BUF_LEN));
+		pr_err("\tinum           %llu\n",
+		       (unsigned long long)le64_to_cpu(dent->inum));
+		pr_err("\ttype           %d\n", (int)dent->type);
+		pr_err("\tnlen           %d\n", nlen);
+		pr_err("\tname           ");
+
+		if (nlen > UBIFS_MAX_NLEN)
+			pr_err("(bad name length, not printing, bad or corrupted node)");
+		else {
+			for (i = 0; i < nlen && dent->name[i]; i++)
+				pr_cont("%c", dent->name[i]);
+		}
+		pr_cont("\n");
+
+		break;
+	}
+	case UBIFS_DATA_NODE:
+	{
+		const struct ubifs_data_node *dn = node;
+		int dlen = le32_to_cpu(ch->len) - UBIFS_DATA_NODE_SZ;
+
+		key_read(c, &dn->key, &key);
+		pr_err("\tkey            %s\n",
+		       dbg_snprintf_key(c, &key, key_buf, DBG_KEY_BUF_LEN));
+		pr_err("\tsize           %u\n", le32_to_cpu(dn->size));
+		pr_err("\tcompr_typ      %d\n",
+		       (int)le16_to_cpu(dn->compr_type));
+		pr_err("\tdata size      %d\n", dlen);
+		pr_err("\tdata:\n");
+		print_hex_dump(KERN_ERR, "\t", DUMP_PREFIX_OFFSET, 32, 1,
+			       (void *)&dn->data, dlen, 0);
+		break;
+	}
+	case UBIFS_TRUN_NODE:
+	{
+		const struct ubifs_trun_node *trun = node;
+
+		pr_err("\tinum           %u\n", le32_to_cpu(trun->inum));
+		pr_err("\told_size       %llu\n",
+		       (unsigned long long)le64_to_cpu(trun->old_size));
+		pr_err("\tnew_size       %llu\n",
+		       (unsigned long long)le64_to_cpu(trun->new_size));
+		break;
+	}
+	case UBIFS_IDX_NODE:
+	{
+		const struct ubifs_idx_node *idx = node;
+
+		n = le16_to_cpu(idx->child_cnt);
+		pr_err("\tchild_cnt      %d\n", n);
+		pr_err("\tlevel          %d\n", (int)le16_to_cpu(idx->level));
+		pr_err("\tBranches:\n");
+
+		for (i = 0; i < n && i < c->fanout - 1; i++) {
+			const struct ubifs_branch *br;
+
+			br = ubifs_idx_branch(c, idx, i);
+			key_read(c, &br->key, &key);
+			pr_err("\t%d: LEB %d:%d len %d key %s\n",
+			       i, le32_to_cpu(br->lnum), le32_to_cpu(br->offs),
+			       le32_to_cpu(br->len),
+			       dbg_snprintf_key(c, &key, key_buf,
+						DBG_KEY_BUF_LEN));
+		}
+		break;
+	}
+	case UBIFS_CS_NODE:
+		break;
+	case UBIFS_ORPH_NODE:
+	{
+		const struct ubifs_orph_node *orph = node;
+
+		pr_err("\tcommit number  %llu\n",
+		       (unsigned long long)
+				le64_to_cpu(orph->cmt_no) & LLONG_MAX);
+		pr_err("\tlast node flag %llu\n",
+		       (unsigned long long)(le64_to_cpu(orph->cmt_no)) >> 63);
+		n = (le32_to_cpu(ch->len) - UBIFS_ORPH_NODE_SZ) >> 3;
+		pr_err("\t%d orphan inode numbers:\n", n);
+		for (i = 0; i < n; i++)
+			pr_err("\t  ino %llu\n",
+			       (unsigned long long)le64_to_cpu(orph->inos[i]));
+		break;
+	}
+	default:
+		pr_err("node type %d was not recognized\n",
+		       (int)ch->node_type);
+	}
+	spin_unlock(&dbg_lock);
+}
+
+void ubifs_dump_budget_req(const struct ubifs_budget_req *req)
+{
+	spin_lock(&dbg_lock);
+	pr_err("Budgeting request: new_ino %d, dirtied_ino %d\n",
+	       req->new_ino, req->dirtied_ino);
+	pr_err("\tnew_ino_d   %d, dirtied_ino_d %d\n",
+	       req->new_ino_d, req->dirtied_ino_d);
+	pr_err("\tnew_page    %d, dirtied_page %d\n",
+	       req->new_page, req->dirtied_page);
+	pr_err("\tnew_dent    %d, mod_dent     %d\n",
+	       req->new_dent, req->mod_dent);
+	pr_err("\tidx_growth  %d\n", req->idx_growth);
+	pr_err("\tdata_growth %d dd_growth     %d\n",
+	       req->data_growth, req->dd_growth);
+	spin_unlock(&dbg_lock);
+}
+
+void ubifs_dump_lstats(const struct ubifs_lp_stats *lst)
+{
+	spin_lock(&dbg_lock);
+	pr_err("(pid %d) Lprops statistics: empty_lebs %d, idx_lebs  %d\n",
+	       current->pid, lst->empty_lebs, lst->idx_lebs);
+	pr_err("\ttaken_empty_lebs %d, total_free %lld, total_dirty %lld\n",
+	       lst->taken_empty_lebs, lst->total_free, lst->total_dirty);
+	pr_err("\ttotal_used %lld, total_dark %lld, total_dead %lld\n",
+	       lst->total_used, lst->total_dark, lst->total_dead);
+	spin_unlock(&dbg_lock);
+}
+
+#ifndef __UBOOT__
+void ubifs_dump_budg(struct ubifs_info *c, const struct ubifs_budg_info *bi)
+{
+	int i;
+	struct rb_node *rb;
+	struct ubifs_bud *bud;
+	struct ubifs_gced_idx_leb *idx_gc;
+	long long available, outstanding, free;
+
+	spin_lock(&c->space_lock);
+	spin_lock(&dbg_lock);
+	pr_err("(pid %d) Budgeting info: data budget sum %lld, total budget sum %lld\n",
+	       current->pid, bi->data_growth + bi->dd_growth,
+	       bi->data_growth + bi->dd_growth + bi->idx_growth);
+	pr_err("\tbudg_data_growth %lld, budg_dd_growth %lld, budg_idx_growth %lld\n",
+	       bi->data_growth, bi->dd_growth, bi->idx_growth);
+	pr_err("\tmin_idx_lebs %d, old_idx_sz %llu, uncommitted_idx %lld\n",
+	       bi->min_idx_lebs, bi->old_idx_sz, bi->uncommitted_idx);
+	pr_err("\tpage_budget %d, inode_budget %d, dent_budget %d\n",
+	       bi->page_budget, bi->inode_budget, bi->dent_budget);
+	pr_err("\tnospace %u, nospace_rp %u\n", bi->nospace, bi->nospace_rp);
+	pr_err("\tdark_wm %d, dead_wm %d, max_idx_node_sz %d\n",
+	       c->dark_wm, c->dead_wm, c->max_idx_node_sz);
+
+	if (bi != &c->bi)
+		/*
+		 * If we are dumping saved budgeting data, do not print
+		 * additional information which is about the current state, not
+		 * the old one which corresponded to the saved budgeting data.
+		 */
+		goto out_unlock;
+
+	pr_err("\tfreeable_cnt %d, calc_idx_sz %lld, idx_gc_cnt %d\n",
+	       c->freeable_cnt, c->calc_idx_sz, c->idx_gc_cnt);
+	pr_err("\tdirty_pg_cnt %ld, dirty_zn_cnt %ld, clean_zn_cnt %ld\n",
+	       atomic_long_read(&c->dirty_pg_cnt),
+	       atomic_long_read(&c->dirty_zn_cnt),
+	       atomic_long_read(&c->clean_zn_cnt));
+	pr_err("\tgc_lnum %d, ihead_lnum %d\n", c->gc_lnum, c->ihead_lnum);
+
+	/* If we are in R/O mode, journal heads do not exist */
+	if (c->jheads)
+		for (i = 0; i < c->jhead_cnt; i++)
+			pr_err("\tjhead %s\t LEB %d\n",
+			       dbg_jhead(c->jheads[i].wbuf.jhead),
+			       c->jheads[i].wbuf.lnum);
+	for (rb = rb_first(&c->buds); rb; rb = rb_next(rb)) {
+		bud = rb_entry(rb, struct ubifs_bud, rb);
+		pr_err("\tbud LEB %d\n", bud->lnum);
+	}
+	list_for_each_entry(bud, &c->old_buds, list)
+		pr_err("\told bud LEB %d\n", bud->lnum);
+	list_for_each_entry(idx_gc, &c->idx_gc, list)
+		pr_err("\tGC'ed idx LEB %d unmap %d\n",
+		       idx_gc->lnum, idx_gc->unmap);
+	pr_err("\tcommit state %d\n", c->cmt_state);
+
+	/* Print budgeting predictions */
+	available = ubifs_calc_available(c, c->bi.min_idx_lebs);
+	outstanding = c->bi.data_growth + c->bi.dd_growth;
+	free = ubifs_get_free_space_nolock(c);
+	pr_err("Budgeting predictions:\n");
+	pr_err("\tavailable: %lld, outstanding %lld, free %lld\n",
+	       available, outstanding, free);
+out_unlock:
+	spin_unlock(&dbg_lock);
+	spin_unlock(&c->space_lock);
+}
+#else
+void ubifs_dump_budg(struct ubifs_info *c, const struct ubifs_budg_info *bi)
+{
+}
+#endif
+
+void ubifs_dump_lprop(const struct ubifs_info *c, const struct ubifs_lprops *lp)
+{
+	int i, spc, dark = 0, dead = 0;
+	struct rb_node *rb;
+	struct ubifs_bud *bud;
+
+	spc = lp->free + lp->dirty;
+	if (spc < c->dead_wm)
+		dead = spc;
+	else
+		dark = ubifs_calc_dark(c, spc);
+
+	if (lp->flags & LPROPS_INDEX)
+		pr_err("LEB %-7d free %-8d dirty %-8d used %-8d free + dirty %-8d flags %#x (",
+		       lp->lnum, lp->free, lp->dirty, c->leb_size - spc, spc,
+		       lp->flags);
+	else
+		pr_err("LEB %-7d free %-8d dirty %-8d used %-8d free + dirty %-8d dark %-4d dead %-4d nodes fit %-3d flags %#-4x (",
+		       lp->lnum, lp->free, lp->dirty, c->leb_size - spc, spc,
+		       dark, dead, (int)(spc / UBIFS_MAX_NODE_SZ), lp->flags);
+
+	if (lp->flags & LPROPS_TAKEN) {
+		if (lp->flags & LPROPS_INDEX)
+			pr_cont("index, taken");
+		else
+			pr_cont("taken");
+	} else {
+		const char *s;
+
+		if (lp->flags & LPROPS_INDEX) {
+			switch (lp->flags & LPROPS_CAT_MASK) {
+			case LPROPS_DIRTY_IDX:
+				s = "dirty index";
+				break;
+			case LPROPS_FRDI_IDX:
+				s = "freeable index";
+				break;
+			default:
+				s = "index";
+			}
+		} else {
+			switch (lp->flags & LPROPS_CAT_MASK) {
+			case LPROPS_UNCAT:
+				s = "not categorized";
+				break;
+			case LPROPS_DIRTY:
+				s = "dirty";
+				break;
+			case LPROPS_FREE:
+				s = "free";
+				break;
+			case LPROPS_EMPTY:
+				s = "empty";
+				break;
+			case LPROPS_FREEABLE:
+				s = "freeable";
+				break;
+			default:
+				s = NULL;
+				break;
+			}
+		}
+		pr_cont("%s", s);
+	}
+
+	for (rb = rb_first((struct rb_root *)&c->buds); rb; rb = rb_next(rb)) {
+		bud = rb_entry(rb, struct ubifs_bud, rb);
+		if (bud->lnum == lp->lnum) {
+			int head = 0;
+			for (i = 0; i < c->jhead_cnt; i++) {
+				/*
+				 * Note, if we are in R/O mode or in the middle
+				 * of mounting/re-mounting, the write-buffers do
+				 * not exist.
+				 */
+				if (c->jheads &&
+				    lp->lnum == c->jheads[i].wbuf.lnum) {
+					pr_cont(", jhead %s", dbg_jhead(i));
+					head = 1;
+				}
+			}
+			if (!head)
+				pr_cont(", bud of jhead %s",
+				       dbg_jhead(bud->jhead));
+		}
+	}
+	if (lp->lnum == c->gc_lnum)
+		pr_cont(", GC LEB");
+	pr_cont(")\n");
+}
+
+void ubifs_dump_lprops(struct ubifs_info *c)
+{
+	int lnum, err;
+	struct ubifs_lprops lp;
+	struct ubifs_lp_stats lst;
+
+	pr_err("(pid %d) start dumping LEB properties\n", current->pid);
+	ubifs_get_lp_stats(c, &lst);
+	ubifs_dump_lstats(&lst);
+
+	for (lnum = c->main_first; lnum < c->leb_cnt; lnum++) {
+		err = ubifs_read_one_lp(c, lnum, &lp);
+		if (err)
+			ubifs_err("cannot read lprops for LEB %d", lnum);
+
+		ubifs_dump_lprop(c, &lp);
+	}
+	pr_err("(pid %d) finish dumping LEB properties\n", current->pid);
+}
+
+void ubifs_dump_lpt_info(struct ubifs_info *c)
+{
+	int i;
+
+	spin_lock(&dbg_lock);
+	pr_err("(pid %d) dumping LPT information\n", current->pid);
+	pr_err("\tlpt_sz:        %lld\n", c->lpt_sz);
+	pr_err("\tpnode_sz:      %d\n", c->pnode_sz);
+	pr_err("\tnnode_sz:      %d\n", c->nnode_sz);
+	pr_err("\tltab_sz:       %d\n", c->ltab_sz);
+	pr_err("\tlsave_sz:      %d\n", c->lsave_sz);
+	pr_err("\tbig_lpt:       %d\n", c->big_lpt);
+	pr_err("\tlpt_hght:      %d\n", c->lpt_hght);
+	pr_err("\tpnode_cnt:     %d\n", c->pnode_cnt);
+	pr_err("\tnnode_cnt:     %d\n", c->nnode_cnt);
+	pr_err("\tdirty_pn_cnt:  %d\n", c->dirty_pn_cnt);
+	pr_err("\tdirty_nn_cnt:  %d\n", c->dirty_nn_cnt);
+	pr_err("\tlsave_cnt:     %d\n", c->lsave_cnt);
+	pr_err("\tspace_bits:    %d\n", c->space_bits);
+	pr_err("\tlpt_lnum_bits: %d\n", c->lpt_lnum_bits);
+	pr_err("\tlpt_offs_bits: %d\n", c->lpt_offs_bits);
+	pr_err("\tlpt_spc_bits:  %d\n", c->lpt_spc_bits);
+	pr_err("\tpcnt_bits:     %d\n", c->pcnt_bits);
+	pr_err("\tlnum_bits:     %d\n", c->lnum_bits);
+	pr_err("\tLPT root is at %d:%d\n", c->lpt_lnum, c->lpt_offs);
+	pr_err("\tLPT head is at %d:%d\n",
+	       c->nhead_lnum, c->nhead_offs);
+	pr_err("\tLPT ltab is at %d:%d\n", c->ltab_lnum, c->ltab_offs);
+	if (c->big_lpt)
+		pr_err("\tLPT lsave is at %d:%d\n",
+		       c->lsave_lnum, c->lsave_offs);
+	for (i = 0; i < c->lpt_lebs; i++)
+		pr_err("\tLPT LEB %d free %d dirty %d tgc %d cmt %d\n",
+		       i + c->lpt_first, c->ltab[i].free, c->ltab[i].dirty,
+		       c->ltab[i].tgc, c->ltab[i].cmt);
+	spin_unlock(&dbg_lock);
+}
+
+void ubifs_dump_sleb(const struct ubifs_info *c,
+		     const struct ubifs_scan_leb *sleb, int offs)
+{
+	struct ubifs_scan_node *snod;
+
+	pr_err("(pid %d) start dumping scanned data from LEB %d:%d\n",
+	       current->pid, sleb->lnum, offs);
+
+	list_for_each_entry(snod, &sleb->nodes, list) {
+		cond_resched();
+		pr_err("Dumping node at LEB %d:%d len %d\n",
+		       sleb->lnum, snod->offs, snod->len);
+		ubifs_dump_node(c, snod->node);
+	}
+}
+
+void ubifs_dump_leb(const struct ubifs_info *c, int lnum)
+{
+	struct ubifs_scan_leb *sleb;
+	struct ubifs_scan_node *snod;
+	void *buf;
+
+	pr_err("(pid %d) start dumping LEB %d\n", current->pid, lnum);
+
+	buf = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
+	if (!buf) {
+		ubifs_err("cannot allocate memory for dumping LEB %d", lnum);
+		return;
+	}
+
+	sleb = ubifs_scan(c, lnum, 0, buf, 0);
+	if (IS_ERR(sleb)) {
+		ubifs_err("scan error %d", (int)PTR_ERR(sleb));
+		goto out;
+	}
+
+	pr_err("LEB %d has %d nodes ending at %d\n", lnum,
+	       sleb->nodes_cnt, sleb->endpt);
+
+	list_for_each_entry(snod, &sleb->nodes, list) {
+		cond_resched();
+		pr_err("Dumping node at LEB %d:%d len %d\n", lnum,
+		       snod->offs, snod->len);
+		ubifs_dump_node(c, snod->node);
+	}
+
+	pr_err("(pid %d) finish dumping LEB %d\n", current->pid, lnum);
+	ubifs_scan_destroy(sleb);
+
+out:
+	vfree(buf);
+	return;
+}
+
+void ubifs_dump_znode(const struct ubifs_info *c,
+		      const struct ubifs_znode *znode)
+{
+	int n;
+	const struct ubifs_zbranch *zbr;
+	char key_buf[DBG_KEY_BUF_LEN];
+
+	spin_lock(&dbg_lock);
+	if (znode->parent)
+		zbr = &znode->parent->zbranch[znode->iip];
+	else
+		zbr = &c->zroot;
+
+	pr_err("znode %p, LEB %d:%d len %d parent %p iip %d level %d child_cnt %d flags %lx\n",
+	       znode, zbr->lnum, zbr->offs, zbr->len, znode->parent, znode->iip,
+	       znode->level, znode->child_cnt, znode->flags);
+
+	if (znode->child_cnt <= 0 || znode->child_cnt > c->fanout) {
+		spin_unlock(&dbg_lock);
+		return;
+	}
+
+	pr_err("zbranches:\n");
+	for (n = 0; n < znode->child_cnt; n++) {
+		zbr = &znode->zbranch[n];
+		if (znode->level > 0)
+			pr_err("\t%d: znode %p LEB %d:%d len %d key %s\n",
+			       n, zbr->znode, zbr->lnum, zbr->offs, zbr->len,
+			       dbg_snprintf_key(c, &zbr->key, key_buf,
+						DBG_KEY_BUF_LEN));
+		else
+			pr_err("\t%d: LNC %p LEB %d:%d len %d key %s\n",
+			       n, zbr->znode, zbr->lnum, zbr->offs, zbr->len,
+			       dbg_snprintf_key(c, &zbr->key, key_buf,
+						DBG_KEY_BUF_LEN));
+	}
+	spin_unlock(&dbg_lock);
 }
 
-const char *dbg_key_str0(const struct ubifs_info *c, const union ubifs_key *key)
+void ubifs_dump_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat)
 {
-	/* dbg_lock must be held */
-	sprintf_key(c, key, dbg_key_buf0);
-	return dbg_key_buf0;
+	int i;
+
+	pr_err("(pid %d) start dumping heap cat %d (%d elements)\n",
+	       current->pid, cat, heap->cnt);
+	for (i = 0; i < heap->cnt; i++) {
+		struct ubifs_lprops *lprops = heap->arr[i];
+
+		pr_err("\t%d. LEB %d hpos %d free %d dirty %d flags %d\n",
+		       i, lprops->lnum, lprops->hpos, lprops->free,
+		       lprops->dirty, lprops->flags);
+	}
+	pr_err("(pid %d) finish dumping heap\n", current->pid);
+}
+
+void ubifs_dump_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode,
+		      struct ubifs_nnode *parent, int iip)
+{
+	int i;
+
+	pr_err("(pid %d) dumping pnode:\n", current->pid);
+	pr_err("\taddress %zx parent %zx cnext %zx\n",
+	       (size_t)pnode, (size_t)parent, (size_t)pnode->cnext);
+	pr_err("\tflags %lu iip %d level %d num %d\n",
+	       pnode->flags, iip, pnode->level, pnode->num);
+	for (i = 0; i < UBIFS_LPT_FANOUT; i++) {
+		struct ubifs_lprops *lp = &pnode->lprops[i];
+
+		pr_err("\t%d: free %d dirty %d flags %d lnum %d\n",
+		       i, lp->free, lp->dirty, lp->flags, lp->lnum);
+	}
+}
+
+void ubifs_dump_tnc(struct ubifs_info *c)
+{
+	struct ubifs_znode *znode;
+	int level;
+
+	pr_err("\n");
+	pr_err("(pid %d) start dumping TNC tree\n", current->pid);
+	znode = ubifs_tnc_levelorder_next(c->zroot.znode, NULL);
+	level = znode->level;
+	pr_err("== Level %d ==\n", level);
+	while (znode) {
+		if (level != znode->level) {
+			level = znode->level;
+			pr_err("== Level %d ==\n", level);
+		}
+		ubifs_dump_znode(c, znode);
+		znode = ubifs_tnc_levelorder_next(c->zroot.znode, znode);
+	}
+	pr_err("(pid %d) finish dumping TNC tree\n", current->pid);
+}
+
+static int dump_znode(struct ubifs_info *c, struct ubifs_znode *znode,
+		      void *priv)
+{
+	ubifs_dump_znode(c, znode);
+	return 0;
 }
 
-const char *dbg_key_str1(const struct ubifs_info *c, const union ubifs_key *key)
+/**
+ * ubifs_dump_index - dump the on-flash index.
+ * @c: UBIFS file-system description object
+ *
+ * This function dumps whole UBIFS indexing B-tree, unlike 'ubifs_dump_tnc()'
+ * which dumps only in-memory znodes and does not read znodes which from flash.
+ */
+void ubifs_dump_index(struct ubifs_info *c)
 {
-	/* dbg_lock must be held */
-	sprintf_key(c, key, dbg_key_buf1);
-	return dbg_key_buf1;
+	dbg_walk_index(c, NULL, dump_znode, NULL);
 }
 
+#ifndef __UBOOT__
 /**
- * ubifs_debugging_init - initialize UBIFS debugging.
+ * dbg_save_space_info - save information about flash space.
  * @c: UBIFS file-system description object
  *
- * This function initializes debugging-related data for the file system.
- * Returns zero in case of success and a negative error code in case of
- * failure.
+ * This function saves information about UBIFS free space, dirty space, etc, in
+ * order to check it later.
  */
-int ubifs_debugging_init(struct ubifs_info *c)
+void dbg_save_space_info(struct ubifs_info *c)
 {
-	c->dbg = kzalloc(sizeof(struct ubifs_debug_info), GFP_KERNEL);
-	if (!c->dbg)
-		return -ENOMEM;
+	struct ubifs_debug_info *d = c->dbg;
+	int freeable_cnt;
+
+	spin_lock(&c->space_lock);
+	memcpy(&d->saved_lst, &c->lst, sizeof(struct ubifs_lp_stats));
+	memcpy(&d->saved_bi, &c->bi, sizeof(struct ubifs_budg_info));
+	d->saved_idx_gc_cnt = c->idx_gc_cnt;
 
-	c->dbg->buf = vmalloc(c->leb_size);
-	if (!c->dbg->buf)
+	/*
+	 * We use a dirty hack here and zero out @c->freeable_cnt, because it
+	 * affects the free space calculations, and UBIFS might not know about
+	 * all freeable eraseblocks. Indeed, we know about freeable eraseblocks
+	 * only when we read their lprops, and we do this only lazily, upon the
+	 * need. So at any given point of time @c->freeable_cnt might be not
+	 * exactly accurate.
+	 *
+	 * Just one example about the issue we hit when we did not zero
+	 * @c->freeable_cnt.
+	 * 1. The file-system is mounted R/O, c->freeable_cnt is %0. We save the
+	 *    amount of free space in @d->saved_free
+	 * 2. We re-mount R/W, which makes UBIFS to read the "lsave"
+	 *    information from flash, where we cache LEBs from various
+	 *    categories ('ubifs_remount_fs()' -> 'ubifs_lpt_init()'
+	 *    -> 'lpt_init_wr()' -> 'read_lsave()' -> 'ubifs_lpt_lookup()'
+	 *    -> 'ubifs_get_pnode()' -> 'update_cats()'
+	 *    -> 'ubifs_add_to_cat()').
+	 * 3. Lsave contains a freeable eraseblock, and @c->freeable_cnt
+	 *    becomes %1.
+	 * 4. We calculate the amount of free space when the re-mount is
+	 *    finished in 'dbg_check_space_info()' and it does not match
+	 *    @d->saved_free.
+	 */
+	freeable_cnt = c->freeable_cnt;
+	c->freeable_cnt = 0;
+	d->saved_free = ubifs_get_free_space_nolock(c);
+	c->freeable_cnt = freeable_cnt;
+	spin_unlock(&c->space_lock);
+}
+
+/**
+ * dbg_check_space_info - check flash space information.
+ * @c: UBIFS file-system description object
+ *
+ * This function compares current flash space information with the information
+ * which was saved when the 'dbg_save_space_info()' function was called.
+ * Returns zero if the information has not changed, and %-EINVAL it it has
+ * changed.
+ */
+int dbg_check_space_info(struct ubifs_info *c)
+{
+	struct ubifs_debug_info *d = c->dbg;
+	struct ubifs_lp_stats lst;
+	long long free;
+	int freeable_cnt;
+
+	spin_lock(&c->space_lock);
+	freeable_cnt = c->freeable_cnt;
+	c->freeable_cnt = 0;
+	free = ubifs_get_free_space_nolock(c);
+	c->freeable_cnt = freeable_cnt;
+	spin_unlock(&c->space_lock);
+
+	if (free != d->saved_free) {
+		ubifs_err("free space changed from %lld to %lld",
+			  d->saved_free, free);
 		goto out;
+	}
 
 	return 0;
 
 out:
-	kfree(c->dbg);
-	return -ENOMEM;
+	ubifs_msg("saved lprops statistics dump");
+	ubifs_dump_lstats(&d->saved_lst);
+	ubifs_msg("saved budgeting info dump");
+	ubifs_dump_budg(c, &d->saved_bi);
+	ubifs_msg("saved idx_gc_cnt %d", d->saved_idx_gc_cnt);
+	ubifs_msg("current lprops statistics dump");
+	ubifs_get_lp_stats(c, &lst);
+	ubifs_dump_lstats(&lst);
+	ubifs_msg("current budgeting info dump");
+	ubifs_dump_budg(c, &c->bi);
+	dump_stack();
+	return -EINVAL;
 }
 
 /**
- * ubifs_debugging_exit - free debugging data.
+ * dbg_check_synced_i_size - check synchronized inode size.
  * @c: UBIFS file-system description object
+ * @inode: inode to check
+ *
+ * If inode is clean, synchronized inode size has to be equivalent to current
+ * inode size. This function has to be called only for locked inodes (@i_mutex
+ * has to be locked). Returns %0 if synchronized inode size if correct, and
+ * %-EINVAL if not.
  */
-void ubifs_debugging_exit(struct ubifs_info *c)
+int dbg_check_synced_i_size(const struct ubifs_info *c, struct inode *inode)
 {
-	vfree(c->dbg->buf);
-	kfree(c->dbg);
+	int err = 0;
+	struct ubifs_inode *ui = ubifs_inode(inode);
+
+	if (!dbg_is_chk_gen(c))
+		return 0;
+	if (!S_ISREG(inode->i_mode))
+		return 0;
+
+	mutex_lock(&ui->ui_mutex);
+	spin_lock(&ui->ui_lock);
+	if (ui->ui_size != ui->synced_i_size && !ui->dirty) {
+		ubifs_err("ui_size is %lld, synced_i_size is %lld, but inode is clean",
+			  ui->ui_size, ui->synced_i_size);
+		ubifs_err("i_ino %lu, i_mode %#x, i_size %lld", inode->i_ino,
+			  inode->i_mode, i_size_read(inode));
+		dump_stack();
+		err = -EINVAL;
+	}
+	spin_unlock(&ui->ui_lock);
+	mutex_unlock(&ui->ui_mutex);
+	return err;
+}
+
+/*
+ * dbg_check_dir - check directory inode size and link count.
+ * @c: UBIFS file-system description object
+ * @dir: the directory to calculate size for
+ * @size: the result is returned here
+ *
+ * This function makes sure that directory size and link count are correct.
+ * Returns zero in case of success and a negative error code in case of
+ * failure.
+ *
+ * Note, it is good idea to make sure the @dir->i_mutex is locked before
+ * calling this function.
+ */
+int dbg_check_dir(struct ubifs_info *c, const struct inode *dir)
+{
+	unsigned int nlink = 2;
+	union ubifs_key key;
+	struct ubifs_dent_node *dent, *pdent = NULL;
+	struct qstr nm = { .name = NULL };
+	loff_t size = UBIFS_INO_NODE_SZ;
+
+	if (!dbg_is_chk_gen(c))
+		return 0;
+
+	if (!S_ISDIR(dir->i_mode))
+		return 0;
+
+	lowest_dent_key(c, &key, dir->i_ino);
+	while (1) {
+		int err;
+
+		dent = ubifs_tnc_next_ent(c, &key, &nm);
+		if (IS_ERR(dent)) {
+			err = PTR_ERR(dent);
+			if (err == -ENOENT)
+				break;
+			return err;
+		}
+
+		nm.name = dent->name;
+		nm.len = le16_to_cpu(dent->nlen);
+		size += CALC_DENT_SIZE(nm.len);
+		if (dent->type == UBIFS_ITYPE_DIR)
+			nlink += 1;
+		kfree(pdent);
+		pdent = dent;
+		key_read(c, &dent->key, &key);
+	}
+	kfree(pdent);
+
+	if (i_size_read(dir) != size) {
+		ubifs_err("directory inode %lu has size %llu, but calculated size is %llu",
+			  dir->i_ino, (unsigned long long)i_size_read(dir),
+			  (unsigned long long)size);
+		ubifs_dump_inode(c, dir);
+		dump_stack();
+		return -EINVAL;
+	}
+	if (dir->i_nlink != nlink) {
+		ubifs_err("directory inode %lu has nlink %u, but calculated nlink is %u",
+			  dir->i_ino, dir->i_nlink, nlink);
+		ubifs_dump_inode(c, dir);
+		dump_stack();
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * dbg_check_key_order - make sure that colliding keys are properly ordered.
+ * @c: UBIFS file-system description object
+ * @zbr1: first zbranch
+ * @zbr2: following zbranch
+ *
+ * In UBIFS indexing B-tree colliding keys has to be sorted in binary order of
+ * names of the direntries/xentries which are referred by the keys. This
+ * function reads direntries/xentries referred by @zbr1 and @zbr2 and makes
+ * sure the name of direntry/xentry referred by @zbr1 is less than
+ * direntry/xentry referred by @zbr2. Returns zero if this is true, %1 if not,
+ * and a negative error code in case of failure.
+ */
+static int dbg_check_key_order(struct ubifs_info *c, struct ubifs_zbranch *zbr1,
+			       struct ubifs_zbranch *zbr2)
+{
+	int err, nlen1, nlen2, cmp;
+	struct ubifs_dent_node *dent1, *dent2;
+	union ubifs_key key;
+	char key_buf[DBG_KEY_BUF_LEN];
+
+	ubifs_assert(!keys_cmp(c, &zbr1->key, &zbr2->key));
+	dent1 = kmalloc(UBIFS_MAX_DENT_NODE_SZ, GFP_NOFS);
+	if (!dent1)
+		return -ENOMEM;
+	dent2 = kmalloc(UBIFS_MAX_DENT_NODE_SZ, GFP_NOFS);
+	if (!dent2) {
+		err = -ENOMEM;
+		goto out_free;
+	}
+
+	err = ubifs_tnc_read_node(c, zbr1, dent1);
+	if (err)
+		goto out_free;
+	err = ubifs_validate_entry(c, dent1);
+	if (err)
+		goto out_free;
+
+	err = ubifs_tnc_read_node(c, zbr2, dent2);
+	if (err)
+		goto out_free;
+	err = ubifs_validate_entry(c, dent2);
+	if (err)
+		goto out_free;
+
+	/* Make sure node keys are the same as in zbranch */
+	err = 1;
+	key_read(c, &dent1->key, &key);
+	if (keys_cmp(c, &zbr1->key, &key)) {
+		ubifs_err("1st entry at %d:%d has key %s", zbr1->lnum,
+			  zbr1->offs, dbg_snprintf_key(c, &key, key_buf,
+						       DBG_KEY_BUF_LEN));
+		ubifs_err("but it should have key %s according to tnc",
+			  dbg_snprintf_key(c, &zbr1->key, key_buf,
+					   DBG_KEY_BUF_LEN));
+		ubifs_dump_node(c, dent1);
+		goto out_free;
+	}
+
+	key_read(c, &dent2->key, &key);
+	if (keys_cmp(c, &zbr2->key, &key)) {
+		ubifs_err("2nd entry at %d:%d has key %s", zbr1->lnum,
+			  zbr1->offs, dbg_snprintf_key(c, &key, key_buf,
+						       DBG_KEY_BUF_LEN));
+		ubifs_err("but it should have key %s according to tnc",
+			  dbg_snprintf_key(c, &zbr2->key, key_buf,
+					   DBG_KEY_BUF_LEN));
+		ubifs_dump_node(c, dent2);
+		goto out_free;
+	}
+
+	nlen1 = le16_to_cpu(dent1->nlen);
+	nlen2 = le16_to_cpu(dent2->nlen);
+
+	cmp = memcmp(dent1->name, dent2->name, min_t(int, nlen1, nlen2));
+	if (cmp < 0 || (cmp == 0 && nlen1 < nlen2)) {
+		err = 0;
+		goto out_free;
+	}
+	if (cmp == 0 && nlen1 == nlen2)
+		ubifs_err("2 xent/dent nodes with the same name");
+	else
+		ubifs_err("bad order of colliding key %s",
+			  dbg_snprintf_key(c, &key, key_buf, DBG_KEY_BUF_LEN));
+
+	ubifs_msg("first node at %d:%d\n", zbr1->lnum, zbr1->offs);
+	ubifs_dump_node(c, dent1);
+	ubifs_msg("second node at %d:%d\n", zbr2->lnum, zbr2->offs);
+	ubifs_dump_node(c, dent2);
+
+out_free:
+	kfree(dent2);
+	kfree(dent1);
+	return err;
 }
 
-#endif /* CONFIG_UBIFS_FS_DEBUG */
+/**
+ * dbg_check_znode - check if znode is all right.
+ * @c: UBIFS file-system description object
+ * @zbr: zbranch which points to this znode
+ *
+ * This function makes sure that znode referred to by @zbr is all right.
+ * Returns zero if it is, and %-EINVAL if it is not.
+ */
+static int dbg_check_znode(struct ubifs_info *c, struct ubifs_zbranch *zbr)
+{
+	struct ubifs_znode *znode = zbr->znode;
+	struct ubifs_znode *zp = znode->parent;
+	int n, err, cmp;
+
+	if (znode->child_cnt <= 0 || znode->child_cnt > c->fanout) {
+		err = 1;
+		goto out;
+	}
+	if (znode->level < 0) {
+		err = 2;
+		goto out;
+	}
+	if (znode->iip < 0 || znode->iip >= c->fanout) {
+		err = 3;
+		goto out;
+	}
+
+	if (zbr->len == 0)
+		/* Only dirty zbranch may have no on-flash nodes */
+		if (!ubifs_zn_dirty(znode)) {
+			err = 4;
+			goto out;
+		}
+
+	if (ubifs_zn_dirty(znode)) {
+		/*
+		 * If znode is dirty, its parent has to be dirty as well. The
+		 * order of the operation is important, so we have to have
+		 * memory barriers.
+		 */
+		smp_mb();
+		if (zp && !ubifs_zn_dirty(zp)) {
+			/*
+			 * The dirty flag is atomic and is cleared outside the
+			 * TNC mutex, so znode's dirty flag may now have
+			 * been cleared. The child is always cleared before the
+			 * parent, so we just need to check again.
+			 */
+			smp_mb();
+			if (ubifs_zn_dirty(znode)) {
+				err = 5;
+				goto out;
+			}
+		}
+	}
+
+	if (zp) {
+		const union ubifs_key *min, *max;
+
+		if (znode->level != zp->level - 1) {
+			err = 6;
+			goto out;
+		}
+
+		/* Make sure the 'parent' pointer in our znode is correct */
+		err = ubifs_search_zbranch(c, zp, &zbr->key, &n);
+		if (!err) {
+			/* This zbranch does not exist in the parent */
+			err = 7;
+			goto out;
+		}
+
+		if (znode->iip >= zp->child_cnt) {
+			err = 8;
+			goto out;
+		}
+
+		if (znode->iip != n) {
+			/* This may happen only in case of collisions */
+			if (keys_cmp(c, &zp->zbranch[n].key,
+				     &zp->zbranch[znode->iip].key)) {
+				err = 9;
+				goto out;
+			}
+			n = znode->iip;
+		}
+
+		/*
+		 * Make sure that the first key in our znode is greater than or
+		 * equal to the key in the pointing zbranch.
+		 */
+		min = &zbr->key;
+		cmp = keys_cmp(c, min, &znode->zbranch[0].key);
+		if (cmp == 1) {
+			err = 10;
+			goto out;
+		}
+
+		if (n + 1 < zp->child_cnt) {
+			max = &zp->zbranch[n + 1].key;
+
+			/*
+			 * Make sure the last key in our znode is less or
+			 * equivalent than the key in the zbranch which goes
+			 * after our pointing zbranch.
+			 */
+			cmp = keys_cmp(c, max,
+				&znode->zbranch[znode->child_cnt - 1].key);
+			if (cmp == -1) {
+				err = 11;
+				goto out;
+			}
+		}
+	} else {
+		/* This may only be root znode */
+		if (zbr != &c->zroot) {
+			err = 12;
+			goto out;
+		}
+	}
+
+	/*
+	 * Make sure that next key is greater or equivalent then the previous
+	 * one.
+	 */
+	for (n = 1; n < znode->child_cnt; n++) {
+		cmp = keys_cmp(c, &znode->zbranch[n - 1].key,
+			       &znode->zbranch[n].key);
+		if (cmp > 0) {
+			err = 13;
+			goto out;
+		}
+		if (cmp == 0) {
+			/* This can only be keys with colliding hash */
+			if (!is_hash_key(c, &znode->zbranch[n].key)) {
+				err = 14;
+				goto out;
+			}
+
+			if (znode->level != 0 || c->replaying)
+				continue;
+
+			/*
+			 * Colliding keys should follow binary order of
+			 * corresponding xentry/dentry names.
+			 */
+			err = dbg_check_key_order(c, &znode->zbranch[n - 1],
+						  &znode->zbranch[n]);
+			if (err < 0)
+				return err;
+			if (err) {
+				err = 15;
+				goto out;
+			}
+		}
+	}
+
+	for (n = 0; n < znode->child_cnt; n++) {
+		if (!znode->zbranch[n].znode &&
+		    (znode->zbranch[n].lnum == 0 ||
+		     znode->zbranch[n].len == 0)) {
+			err = 16;
+			goto out;
+		}
+
+		if (znode->zbranch[n].lnum != 0 &&
+		    znode->zbranch[n].len == 0) {
+			err = 17;
+			goto out;
+		}
+
+		if (znode->zbranch[n].lnum == 0 &&
+		    znode->zbranch[n].len != 0) {
+			err = 18;
+			goto out;
+		}
+
+		if (znode->zbranch[n].lnum == 0 &&
+		    znode->zbranch[n].offs != 0) {
+			err = 19;
+			goto out;
+		}
+
+		if (znode->level != 0 && znode->zbranch[n].znode)
+			if (znode->zbranch[n].znode->parent != znode) {
+				err = 20;
+				goto out;
+			}
+	}
+
+	return 0;
+
+out:
+	ubifs_err("failed, error %d", err);
+	ubifs_msg("dump of the znode");
+	ubifs_dump_znode(c, znode);
+	if (zp) {
+		ubifs_msg("dump of the parent znode");
+		ubifs_dump_znode(c, zp);
+	}
+	dump_stack();
+	return -EINVAL;
+}
+#else
+
+int dbg_check_dir(struct ubifs_info *c, const struct inode *dir)
+{
+	return 0;
+}
+
+void dbg_debugfs_exit_fs(struct ubifs_info *c)
+{
+	return;
+}
+
+int ubifs_debugging_init(struct ubifs_info *c)
+{
+	return 0;
+}
+void ubifs_debugging_exit(struct ubifs_info *c)
+{
+}
+int dbg_check_filesystem(struct ubifs_info *c)
+{
+	return 0;
+}
+int dbg_debugfs_init_fs(struct ubifs_info *c)
+{
+	return 0;
+}
+#endif
+
+#ifndef __UBOOT__
+/**
+ * dbg_check_tnc - check TNC tree.
+ * @c: UBIFS file-system description object
+ * @extra: do extra checks that are possible at start commit
+ *
+ * This function traverses whole TNC tree and checks every znode. Returns zero
+ * if everything is all right and %-EINVAL if something is wrong with TNC.
+ */
+int dbg_check_tnc(struct ubifs_info *c, int extra)
+{
+	struct ubifs_znode *znode;
+	long clean_cnt = 0, dirty_cnt = 0;
+	int err, last;
+
+	if (!dbg_is_chk_index(c))
+		return 0;
+
+	ubifs_assert(mutex_is_locked(&c->tnc_mutex));
+	if (!c->zroot.znode)
+		return 0;
+
+	znode = ubifs_tnc_postorder_first(c->zroot.znode);
+	while (1) {
+		struct ubifs_znode *prev;
+		struct ubifs_zbranch *zbr;
+
+		if (!znode->parent)
+			zbr = &c->zroot;
+		else
+			zbr = &znode->parent->zbranch[znode->iip];
+
+		err = dbg_check_znode(c, zbr);
+		if (err)
+			return err;
+
+		if (extra) {
+			if (ubifs_zn_dirty(znode))
+				dirty_cnt += 1;
+			else
+				clean_cnt += 1;
+		}
+
+		prev = znode;
+		znode = ubifs_tnc_postorder_next(znode);
+		if (!znode)
+			break;
+
+		/*
+		 * If the last key of this znode is equivalent to the first key
+		 * of the next znode (collision), then check order of the keys.
+		 */
+		last = prev->child_cnt - 1;
+		if (prev->level == 0 && znode->level == 0 && !c->replaying &&
+		    !keys_cmp(c, &prev->zbranch[last].key,
+			      &znode->zbranch[0].key)) {
+			err = dbg_check_key_order(c, &prev->zbranch[last],
+						  &znode->zbranch[0]);
+			if (err < 0)
+				return err;
+			if (err) {
+				ubifs_msg("first znode");
+				ubifs_dump_znode(c, prev);
+				ubifs_msg("second znode");
+				ubifs_dump_znode(c, znode);
+				return -EINVAL;
+			}
+		}
+	}
+
+	if (extra) {
+		if (clean_cnt != atomic_long_read(&c->clean_zn_cnt)) {
+			ubifs_err("incorrect clean_zn_cnt %ld, calculated %ld",
+				  atomic_long_read(&c->clean_zn_cnt),
+				  clean_cnt);
+			return -EINVAL;
+		}
+		if (dirty_cnt != atomic_long_read(&c->dirty_zn_cnt)) {
+			ubifs_err("incorrect dirty_zn_cnt %ld, calculated %ld",
+				  atomic_long_read(&c->dirty_zn_cnt),
+				  dirty_cnt);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+#else
+int dbg_check_tnc(struct ubifs_info *c, int extra)
+{
+	return 0;
+}
+#endif
+
+/**
+ * dbg_walk_index - walk the on-flash index.
+ * @c: UBIFS file-system description object
+ * @leaf_cb: called for each leaf node
+ * @znode_cb: called for each indexing node
+ * @priv: private data which is passed to callbacks
+ *
+ * This function walks the UBIFS index and calls the @leaf_cb for each leaf
+ * node and @znode_cb for each indexing node. Returns zero in case of success
+ * and a negative error code in case of failure.
+ *
+ * It would be better if this function removed every znode it pulled to into
+ * the TNC, so that the behavior more closely matched the non-debugging
+ * behavior.
+ */
+int dbg_walk_index(struct ubifs_info *c, dbg_leaf_callback leaf_cb,
+		   dbg_znode_callback znode_cb, void *priv)
+{
+	int err;
+	struct ubifs_zbranch *zbr;
+	struct ubifs_znode *znode, *child;
+
+	mutex_lock(&c->tnc_mutex);
+	/* If the root indexing node is not in TNC - pull it */
+	if (!c->zroot.znode) {
+		c->zroot.znode = ubifs_load_znode(c, &c->zroot, NULL, 0);
+		if (IS_ERR(c->zroot.znode)) {
+			err = PTR_ERR(c->zroot.znode);
+			c->zroot.znode = NULL;
+			goto out_unlock;
+		}
+	}
+
+	/*
+	 * We are going to traverse the indexing tree in the postorder manner.
+	 * Go down and find the leftmost indexing node where we are going to
+	 * start from.
+	 */
+	znode = c->zroot.znode;
+	while (znode->level > 0) {
+		zbr = &znode->zbranch[0];
+		child = zbr->znode;
+		if (!child) {
+			child = ubifs_load_znode(c, zbr, znode, 0);
+			if (IS_ERR(child)) {
+				err = PTR_ERR(child);
+				goto out_unlock;
+			}
+			zbr->znode = child;
+		}
+
+		znode = child;
+	}
+
+	/* Iterate over all indexing nodes */
+	while (1) {
+		int idx;
+
+		cond_resched();
+
+		if (znode_cb) {
+			err = znode_cb(c, znode, priv);
+			if (err) {
+				ubifs_err("znode checking function returned error %d",
+					  err);
+				ubifs_dump_znode(c, znode);
+				goto out_dump;
+			}
+		}
+		if (leaf_cb && znode->level == 0) {
+			for (idx = 0; idx < znode->child_cnt; idx++) {
+				zbr = &znode->zbranch[idx];
+				err = leaf_cb(c, zbr, priv);
+				if (err) {
+					ubifs_err("leaf checking function returned error %d, for leaf at LEB %d:%d",
+						  err, zbr->lnum, zbr->offs);
+					goto out_dump;
+				}
+			}
+		}
+
+		if (!znode->parent)
+			break;
+
+		idx = znode->iip + 1;
+		znode = znode->parent;
+		if (idx < znode->child_cnt) {
+			/* Switch to the next index in the parent */
+			zbr = &znode->zbranch[idx];
+			child = zbr->znode;
+			if (!child) {
+				child = ubifs_load_znode(c, zbr, znode, idx);
+				if (IS_ERR(child)) {
+					err = PTR_ERR(child);
+					goto out_unlock;
+				}
+				zbr->znode = child;
+			}
+			znode = child;
+		} else
+			/*
+			 * This is the last child, switch to the parent and
+			 * continue.
+			 */
+			continue;
+
+		/* Go to the lowest leftmost znode in the new sub-tree */
+		while (znode->level > 0) {
+			zbr = &znode->zbranch[0];
+			child = zbr->znode;
+			if (!child) {
+				child = ubifs_load_znode(c, zbr, znode, 0);
+				if (IS_ERR(child)) {
+					err = PTR_ERR(child);
+					goto out_unlock;
+				}
+				zbr->znode = child;
+			}
+			znode = child;
+		}
+	}
+
+	mutex_unlock(&c->tnc_mutex);
+	return 0;
+
+out_dump:
+	if (znode->parent)
+		zbr = &znode->parent->zbranch[znode->iip];
+	else
+		zbr = &c->zroot;
+	ubifs_msg("dump of znode at LEB %d:%d", zbr->lnum, zbr->offs);
+	ubifs_dump_znode(c, znode);
+out_unlock:
+	mutex_unlock(&c->tnc_mutex);
+	return err;
+}
+
+/**
+ * add_size - add znode size to partially calculated index size.
+ * @c: UBIFS file-system description object
+ * @znode: znode to add size for
+ * @priv: partially calculated index size
+ *
+ * This is a helper function for 'dbg_check_idx_size()' which is called for
+ * every indexing node and adds its size to the 'long long' variable pointed to
+ * by @priv.
+ */
+static int add_size(struct ubifs_info *c, struct ubifs_znode *znode, void *priv)
+{
+	long long *idx_size = priv;
+	int add;
+
+	add = ubifs_idx_node_sz(c, znode->child_cnt);
+	add = ALIGN(add, 8);
+	*idx_size += add;
+	return 0;
+}
+
+/**
+ * dbg_check_idx_size - check index size.
+ * @c: UBIFS file-system description object
+ * @idx_size: size to check
+ *
+ * This function walks the UBIFS index, calculates its size and checks that the
+ * size is equivalent to @idx_size. Returns zero in case of success and a
+ * negative error code in case of failure.
+ */
+int dbg_check_idx_size(struct ubifs_info *c, long long idx_size)
+{
+	int err;
+	long long calc = 0;
+
+	if (!dbg_is_chk_index(c))
+		return 0;
+
+	err = dbg_walk_index(c, NULL, add_size, &calc);
+	if (err) {
+		ubifs_err("error %d while walking the index", err);
+		return err;
+	}
+
+	if (calc != idx_size) {
+		ubifs_err("index size check failed: calculated size is %lld, should be %lld",
+			  calc, idx_size);
+		dump_stack();
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+#ifndef __UBOOT__
+/**
+ * struct fsck_inode - information about an inode used when checking the file-system.
+ * @rb: link in the RB-tree of inodes
+ * @inum: inode number
+ * @mode: inode type, permissions, etc
+ * @nlink: inode link count
+ * @xattr_cnt: count of extended attributes
+ * @references: how many directory/xattr entries refer this inode (calculated
+ *              while walking the index)
+ * @calc_cnt: for directory inode count of child directories
+ * @size: inode size (read from on-flash inode)
+ * @xattr_sz: summary size of all extended attributes (read from on-flash
+ *            inode)
+ * @calc_sz: for directories calculated directory size
+ * @calc_xcnt: count of extended attributes
+ * @calc_xsz: calculated summary size of all extended attributes
+ * @xattr_nms: sum of lengths of all extended attribute names belonging to this
+ *             inode (read from on-flash inode)
+ * @calc_xnms: calculated sum of lengths of all extended attribute names
+ */
+struct fsck_inode {
+	struct rb_node rb;
+	ino_t inum;
+	umode_t mode;
+	unsigned int nlink;
+	unsigned int xattr_cnt;
+	int references;
+	int calc_cnt;
+	long long size;
+	unsigned int xattr_sz;
+	long long calc_sz;
+	long long calc_xcnt;
+	long long calc_xsz;
+	unsigned int xattr_nms;
+	long long calc_xnms;
+};
+
+/**
+ * struct fsck_data - private FS checking information.
+ * @inodes: RB-tree of all inodes (contains @struct fsck_inode objects)
+ */
+struct fsck_data {
+	struct rb_root inodes;
+};
+
+/**
+ * add_inode - add inode information to RB-tree of inodes.
+ * @c: UBIFS file-system description object
+ * @fsckd: FS checking information
+ * @ino: raw UBIFS inode to add
+ *
+ * This is a helper function for 'check_leaf()' which adds information about
+ * inode @ino to the RB-tree of inodes. Returns inode information pointer in
+ * case of success and a negative error code in case of failure.
+ */
+static struct fsck_inode *add_inode(struct ubifs_info *c,
+				    struct fsck_data *fsckd,
+				    struct ubifs_ino_node *ino)
+{
+	struct rb_node **p, *parent = NULL;
+	struct fsck_inode *fscki;
+	ino_t inum = key_inum_flash(c, &ino->key);
+	struct inode *inode;
+	struct ubifs_inode *ui;
+
+	p = &fsckd->inodes.rb_node;
+	while (*p) {
+		parent = *p;
+		fscki = rb_entry(parent, struct fsck_inode, rb);
+		if (inum < fscki->inum)
+			p = &(*p)->rb_left;
+		else if (inum > fscki->inum)
+			p = &(*p)->rb_right;
+		else
+			return fscki;
+	}
+
+	if (inum > c->highest_inum) {
+		ubifs_err("too high inode number, max. is %lu",
+			  (unsigned long)c->highest_inum);
+		return ERR_PTR(-EINVAL);
+	}
+
+	fscki = kzalloc(sizeof(struct fsck_inode), GFP_NOFS);
+	if (!fscki)
+		return ERR_PTR(-ENOMEM);
+
+	inode = ilookup(c->vfs_sb, inum);
+
+	fscki->inum = inum;
+	/*
+	 * If the inode is present in the VFS inode cache, use it instead of
+	 * the on-flash inode which might be out-of-date. E.g., the size might
+	 * be out-of-date. If we do not do this, the following may happen, for
+	 * example:
+	 *   1. A power cut happens
+	 *   2. We mount the file-system R/O, the replay process fixes up the
+	 *      inode size in the VFS cache, but on on-flash.
+	 *   3. 'check_leaf()' fails because it hits a data node beyond inode
+	 *      size.
+	 */
+	if (!inode) {
+		fscki->nlink = le32_to_cpu(ino->nlink);
+		fscki->size = le64_to_cpu(ino->size);
+		fscki->xattr_cnt = le32_to_cpu(ino->xattr_cnt);
+		fscki->xattr_sz = le32_to_cpu(ino->xattr_size);
+		fscki->xattr_nms = le32_to_cpu(ino->xattr_names);
+		fscki->mode = le32_to_cpu(ino->mode);
+	} else {
+		ui = ubifs_inode(inode);
+		fscki->nlink = inode->i_nlink;
+		fscki->size = inode->i_size;
+		fscki->xattr_cnt = ui->xattr_cnt;
+		fscki->xattr_sz = ui->xattr_size;
+		fscki->xattr_nms = ui->xattr_names;
+		fscki->mode = inode->i_mode;
+		iput(inode);
+	}
+
+	if (S_ISDIR(fscki->mode)) {
+		fscki->calc_sz = UBIFS_INO_NODE_SZ;
+		fscki->calc_cnt = 2;
+	}
+
+	rb_link_node(&fscki->rb, parent, p);
+	rb_insert_color(&fscki->rb, &fsckd->inodes);
+
+	return fscki;
+}
+
+/**
+ * search_inode - search inode in the RB-tree of inodes.
+ * @fsckd: FS checking information
+ * @inum: inode number to search
+ *
+ * This is a helper function for 'check_leaf()' which searches inode @inum in
+ * the RB-tree of inodes and returns an inode information pointer or %NULL if
+ * the inode was not found.
+ */
+static struct fsck_inode *search_inode(struct fsck_data *fsckd, ino_t inum)
+{
+	struct rb_node *p;
+	struct fsck_inode *fscki;
+
+	p = fsckd->inodes.rb_node;
+	while (p) {
+		fscki = rb_entry(p, struct fsck_inode, rb);
+		if (inum < fscki->inum)
+			p = p->rb_left;
+		else if (inum > fscki->inum)
+			p = p->rb_right;
+		else
+			return fscki;
+	}
+	return NULL;
+}
+
+/**
+ * read_add_inode - read inode node and add it to RB-tree of inodes.
+ * @c: UBIFS file-system description object
+ * @fsckd: FS checking information
+ * @inum: inode number to read
+ *
+ * This is a helper function for 'check_leaf()' which finds inode node @inum in
+ * the index, reads it, and adds it to the RB-tree of inodes. Returns inode
+ * information pointer in case of success and a negative error code in case of
+ * failure.
+ */
+static struct fsck_inode *read_add_inode(struct ubifs_info *c,
+					 struct fsck_data *fsckd, ino_t inum)
+{
+	int n, err;
+	union ubifs_key key;
+	struct ubifs_znode *znode;
+	struct ubifs_zbranch *zbr;
+	struct ubifs_ino_node *ino;
+	struct fsck_inode *fscki;
+
+	fscki = search_inode(fsckd, inum);
+	if (fscki)
+		return fscki;
+
+	ino_key_init(c, &key, inum);
+	err = ubifs_lookup_level0(c, &key, &znode, &n);
+	if (!err) {
+		ubifs_err("inode %lu not found in index", (unsigned long)inum);
+		return ERR_PTR(-ENOENT);
+	} else if (err < 0) {
+		ubifs_err("error %d while looking up inode %lu",
+			  err, (unsigned long)inum);
+		return ERR_PTR(err);
+	}
+
+	zbr = &znode->zbranch[n];
+	if (zbr->len < UBIFS_INO_NODE_SZ) {
+		ubifs_err("bad node %lu node length %d",
+			  (unsigned long)inum, zbr->len);
+		return ERR_PTR(-EINVAL);
+	}
+
+	ino = kmalloc(zbr->len, GFP_NOFS);
+	if (!ino)
+		return ERR_PTR(-ENOMEM);
+
+	err = ubifs_tnc_read_node(c, zbr, ino);
+	if (err) {
+		ubifs_err("cannot read inode node at LEB %d:%d, error %d",
+			  zbr->lnum, zbr->offs, err);
+		kfree(ino);
+		return ERR_PTR(err);
+	}
+
+	fscki = add_inode(c, fsckd, ino);
+	kfree(ino);
+	if (IS_ERR(fscki)) {
+		ubifs_err("error %ld while adding inode %lu node",
+			  PTR_ERR(fscki), (unsigned long)inum);
+		return fscki;
+	}
+
+	return fscki;
+}
+
+/**
+ * check_leaf - check leaf node.
+ * @c: UBIFS file-system description object
+ * @zbr: zbranch of the leaf node to check
+ * @priv: FS checking information
+ *
+ * This is a helper function for 'dbg_check_filesystem()' which is called for
+ * every single leaf node while walking the indexing tree. It checks that the
+ * leaf node referred from the indexing tree exists, has correct CRC, and does
+ * some other basic validation. This function is also responsible for building
+ * an RB-tree of inodes - it adds all inodes into the RB-tree. It also
+ * calculates reference count, size, etc for each inode in order to later
+ * compare them to the information stored inside the inodes and detect possible
+ * inconsistencies. Returns zero in case of success and a negative error code
+ * in case of failure.
+ */
+static int check_leaf(struct ubifs_info *c, struct ubifs_zbranch *zbr,
+		      void *priv)
+{
+	ino_t inum;
+	void *node;
+	struct ubifs_ch *ch;
+	int err, type = key_type(c, &zbr->key);
+	struct fsck_inode *fscki;
+
+	if (zbr->len < UBIFS_CH_SZ) {
+		ubifs_err("bad leaf length %d (LEB %d:%d)",
+			  zbr->len, zbr->lnum, zbr->offs);
+		return -EINVAL;
+	}
+
+	node = kmalloc(zbr->len, GFP_NOFS);
+	if (!node)
+		return -ENOMEM;
+
+	err = ubifs_tnc_read_node(c, zbr, node);
+	if (err) {
+		ubifs_err("cannot read leaf node at LEB %d:%d, error %d",
+			  zbr->lnum, zbr->offs, err);
+		goto out_free;
+	}
+
+	/* If this is an inode node, add it to RB-tree of inodes */
+	if (type == UBIFS_INO_KEY) {
+		fscki = add_inode(c, priv, node);
+		if (IS_ERR(fscki)) {
+			err = PTR_ERR(fscki);
+			ubifs_err("error %d while adding inode node", err);
+			goto out_dump;
+		}
+		goto out;
+	}
+
+	if (type != UBIFS_DENT_KEY && type != UBIFS_XENT_KEY &&
+	    type != UBIFS_DATA_KEY) {
+		ubifs_err("unexpected node type %d at LEB %d:%d",
+			  type, zbr->lnum, zbr->offs);
+		err = -EINVAL;
+		goto out_free;
+	}
+
+	ch = node;
+	if (le64_to_cpu(ch->sqnum) > c->max_sqnum) {
+		ubifs_err("too high sequence number, max. is %llu",
+			  c->max_sqnum);
+		err = -EINVAL;
+		goto out_dump;
+	}
+
+	if (type == UBIFS_DATA_KEY) {
+		long long blk_offs;
+		struct ubifs_data_node *dn = node;
+
+		/*
+		 * Search the inode node this data node belongs to and insert
+		 * it to the RB-tree of inodes.
+		 */
+		inum = key_inum_flash(c, &dn->key);
+		fscki = read_add_inode(c, priv, inum);
+		if (IS_ERR(fscki)) {
+			err = PTR_ERR(fscki);
+			ubifs_err("error %d while processing data node and trying to find inode node %lu",
+				  err, (unsigned long)inum);
+			goto out_dump;
+		}
+
+		/* Make sure the data node is within inode size */
+		blk_offs = key_block_flash(c, &dn->key);
+		blk_offs <<= UBIFS_BLOCK_SHIFT;
+		blk_offs += le32_to_cpu(dn->size);
+		if (blk_offs > fscki->size) {
+			ubifs_err("data node at LEB %d:%d is not within inode size %lld",
+				  zbr->lnum, zbr->offs, fscki->size);
+			err = -EINVAL;
+			goto out_dump;
+		}
+	} else {
+		int nlen;
+		struct ubifs_dent_node *dent = node;
+		struct fsck_inode *fscki1;
+
+		err = ubifs_validate_entry(c, dent);
+		if (err)
+			goto out_dump;
+
+		/*
+		 * Search the inode node this entry refers to and the parent
+		 * inode node and insert them to the RB-tree of inodes.
+		 */
+		inum = le64_to_cpu(dent->inum);
+		fscki = read_add_inode(c, priv, inum);
+		if (IS_ERR(fscki)) {
+			err = PTR_ERR(fscki);
+			ubifs_err("error %d while processing entry node and trying to find inode node %lu",
+				  err, (unsigned long)inum);
+			goto out_dump;
+		}
+
+		/* Count how many direntries or xentries refers this inode */
+		fscki->references += 1;
+
+		inum = key_inum_flash(c, &dent->key);
+		fscki1 = read_add_inode(c, priv, inum);
+		if (IS_ERR(fscki1)) {
+			err = PTR_ERR(fscki1);
+			ubifs_err("error %d while processing entry node and trying to find parent inode node %lu",
+				  err, (unsigned long)inum);
+			goto out_dump;
+		}
+
+		nlen = le16_to_cpu(dent->nlen);
+		if (type == UBIFS_XENT_KEY) {
+			fscki1->calc_xcnt += 1;
+			fscki1->calc_xsz += CALC_DENT_SIZE(nlen);
+			fscki1->calc_xsz += CALC_XATTR_BYTES(fscki->size);
+			fscki1->calc_xnms += nlen;
+		} else {
+			fscki1->calc_sz += CALC_DENT_SIZE(nlen);
+			if (dent->type == UBIFS_ITYPE_DIR)
+				fscki1->calc_cnt += 1;
+		}
+	}
+
+out:
+	kfree(node);
+	return 0;
+
+out_dump:
+	ubifs_msg("dump of node at LEB %d:%d", zbr->lnum, zbr->offs);
+	ubifs_dump_node(c, node);
+out_free:
+	kfree(node);
+	return err;
+}
+
+/**
+ * free_inodes - free RB-tree of inodes.
+ * @fsckd: FS checking information
+ */
+static void free_inodes(struct fsck_data *fsckd)
+{
+	struct fsck_inode *fscki, *n;
+
+	rbtree_postorder_for_each_entry_safe(fscki, n, &fsckd->inodes, rb)
+		kfree(fscki);
+}
+
+/**
+ * check_inodes - checks all inodes.
+ * @c: UBIFS file-system description object
+ * @fsckd: FS checking information
+ *
+ * This is a helper function for 'dbg_check_filesystem()' which walks the
+ * RB-tree of inodes after the index scan has been finished, and checks that
+ * inode nlink, size, etc are correct. Returns zero if inodes are fine,
+ * %-EINVAL if not, and a negative error code in case of failure.
+ */
+static int check_inodes(struct ubifs_info *c, struct fsck_data *fsckd)
+{
+	int n, err;
+	union ubifs_key key;
+	struct ubifs_znode *znode;
+	struct ubifs_zbranch *zbr;
+	struct ubifs_ino_node *ino;
+	struct fsck_inode *fscki;
+	struct rb_node *this = rb_first(&fsckd->inodes);
+
+	while (this) {
+		fscki = rb_entry(this, struct fsck_inode, rb);
+		this = rb_next(this);
+
+		if (S_ISDIR(fscki->mode)) {
+			/*
+			 * Directories have to have exactly one reference (they
+			 * cannot have hardlinks), although root inode is an
+			 * exception.
+			 */
+			if (fscki->inum != UBIFS_ROOT_INO &&
+			    fscki->references != 1) {
+				ubifs_err("directory inode %lu has %d direntries which refer it, but should be 1",
+					  (unsigned long)fscki->inum,
+					  fscki->references);
+				goto out_dump;
+			}
+			if (fscki->inum == UBIFS_ROOT_INO &&
+			    fscki->references != 0) {
+				ubifs_err("root inode %lu has non-zero (%d) direntries which refer it",
+					  (unsigned long)fscki->inum,
+					  fscki->references);
+				goto out_dump;
+			}
+			if (fscki->calc_sz != fscki->size) {
+				ubifs_err("directory inode %lu size is %lld, but calculated size is %lld",
+					  (unsigned long)fscki->inum,
+					  fscki->size, fscki->calc_sz);
+				goto out_dump;
+			}
+			if (fscki->calc_cnt != fscki->nlink) {
+				ubifs_err("directory inode %lu nlink is %d, but calculated nlink is %d",
+					  (unsigned long)fscki->inum,
+					  fscki->nlink, fscki->calc_cnt);
+				goto out_dump;
+			}
+		} else {
+			if (fscki->references != fscki->nlink) {
+				ubifs_err("inode %lu nlink is %d, but calculated nlink is %d",
+					  (unsigned long)fscki->inum,
+					  fscki->nlink, fscki->references);
+				goto out_dump;
+			}
+		}
+		if (fscki->xattr_sz != fscki->calc_xsz) {
+			ubifs_err("inode %lu has xattr size %u, but calculated size is %lld",
+				  (unsigned long)fscki->inum, fscki->xattr_sz,
+				  fscki->calc_xsz);
+			goto out_dump;
+		}
+		if (fscki->xattr_cnt != fscki->calc_xcnt) {
+			ubifs_err("inode %lu has %u xattrs, but calculated count is %lld",
+				  (unsigned long)fscki->inum,
+				  fscki->xattr_cnt, fscki->calc_xcnt);
+			goto out_dump;
+		}
+		if (fscki->xattr_nms != fscki->calc_xnms) {
+			ubifs_err("inode %lu has xattr names' size %u, but calculated names' size is %lld",
+				  (unsigned long)fscki->inum, fscki->xattr_nms,
+				  fscki->calc_xnms);
+			goto out_dump;
+		}
+	}
+
+	return 0;
+
+out_dump:
+	/* Read the bad inode and dump it */
+	ino_key_init(c, &key, fscki->inum);
+	err = ubifs_lookup_level0(c, &key, &znode, &n);
+	if (!err) {
+		ubifs_err("inode %lu not found in index",
+			  (unsigned long)fscki->inum);
+		return -ENOENT;
+	} else if (err < 0) {
+		ubifs_err("error %d while looking up inode %lu",
+			  err, (unsigned long)fscki->inum);
+		return err;
+	}
+
+	zbr = &znode->zbranch[n];
+	ino = kmalloc(zbr->len, GFP_NOFS);
+	if (!ino)
+		return -ENOMEM;
+
+	err = ubifs_tnc_read_node(c, zbr, ino);
+	if (err) {
+		ubifs_err("cannot read inode node at LEB %d:%d, error %d",
+			  zbr->lnum, zbr->offs, err);
+		kfree(ino);
+		return err;
+	}
+
+	ubifs_msg("dump of the inode %lu sitting in LEB %d:%d",
+		  (unsigned long)fscki->inum, zbr->lnum, zbr->offs);
+	ubifs_dump_node(c, ino);
+	kfree(ino);
+	return -EINVAL;
+}
+
+/**
+ * dbg_check_filesystem - check the file-system.
+ * @c: UBIFS file-system description object
+ *
+ * This function checks the file system, namely:
+ * o makes sure that all leaf nodes exist and their CRCs are correct;
+ * o makes sure inode nlink, size, xattr size/count are correct (for all
+ *   inodes).
+ *
+ * The function reads whole indexing tree and all nodes, so it is pretty
+ * heavy-weight. Returns zero if the file-system is consistent, %-EINVAL if
+ * not, and a negative error code in case of failure.
+ */
+int dbg_check_filesystem(struct ubifs_info *c)
+{
+	int err;
+	struct fsck_data fsckd;
+
+	if (!dbg_is_chk_fs(c))
+		return 0;
+
+	fsckd.inodes = RB_ROOT;
+	err = dbg_walk_index(c, check_leaf, NULL, &fsckd);
+	if (err)
+		goto out_free;
+
+	err = check_inodes(c, &fsckd);
+	if (err)
+		goto out_free;
+
+	free_inodes(&fsckd);
+	return 0;
+
+out_free:
+	ubifs_err("file-system check failed with error %d", err);
+	dump_stack();
+	free_inodes(&fsckd);
+	return err;
+}
+
+/**
+ * dbg_check_data_nodes_order - check that list of data nodes is sorted.
+ * @c: UBIFS file-system description object
+ * @head: the list of nodes ('struct ubifs_scan_node' objects)
+ *
+ * This function returns zero if the list of data nodes is sorted correctly,
+ * and %-EINVAL if not.
+ */
+int dbg_check_data_nodes_order(struct ubifs_info *c, struct list_head *head)
+{
+	struct list_head *cur;
+	struct ubifs_scan_node *sa, *sb;
+
+	if (!dbg_is_chk_gen(c))
+		return 0;
+
+	for (cur = head->next; cur->next != head; cur = cur->next) {
+		ino_t inuma, inumb;
+		uint32_t blka, blkb;
+
+		cond_resched();
+		sa = container_of(cur, struct ubifs_scan_node, list);
+		sb = container_of(cur->next, struct ubifs_scan_node, list);
+
+		if (sa->type != UBIFS_DATA_NODE) {
+			ubifs_err("bad node type %d", sa->type);
+			ubifs_dump_node(c, sa->node);
+			return -EINVAL;
+		}
+		if (sb->type != UBIFS_DATA_NODE) {
+			ubifs_err("bad node type %d", sb->type);
+			ubifs_dump_node(c, sb->node);
+			return -EINVAL;
+		}
+
+		inuma = key_inum(c, &sa->key);
+		inumb = key_inum(c, &sb->key);
+
+		if (inuma < inumb)
+			continue;
+		if (inuma > inumb) {
+			ubifs_err("larger inum %lu goes before inum %lu",
+				  (unsigned long)inuma, (unsigned long)inumb);
+			goto error_dump;
+		}
+
+		blka = key_block(c, &sa->key);
+		blkb = key_block(c, &sb->key);
+
+		if (blka > blkb) {
+			ubifs_err("larger block %u goes before %u", blka, blkb);
+			goto error_dump;
+		}
+		if (blka == blkb) {
+			ubifs_err("two data nodes for the same block");
+			goto error_dump;
+		}
+	}
+
+	return 0;
+
+error_dump:
+	ubifs_dump_node(c, sa->node);
+	ubifs_dump_node(c, sb->node);
+	return -EINVAL;
+}
+
+/**
+ * dbg_check_nondata_nodes_order - check that list of data nodes is sorted.
+ * @c: UBIFS file-system description object
+ * @head: the list of nodes ('struct ubifs_scan_node' objects)
+ *
+ * This function returns zero if the list of non-data nodes is sorted correctly,
+ * and %-EINVAL if not.
+ */
+int dbg_check_nondata_nodes_order(struct ubifs_info *c, struct list_head *head)
+{
+	struct list_head *cur;
+	struct ubifs_scan_node *sa, *sb;
+
+	if (!dbg_is_chk_gen(c))
+		return 0;
+
+	for (cur = head->next; cur->next != head; cur = cur->next) {
+		ino_t inuma, inumb;
+		uint32_t hasha, hashb;
+
+		cond_resched();
+		sa = container_of(cur, struct ubifs_scan_node, list);
+		sb = container_of(cur->next, struct ubifs_scan_node, list);
+
+		if (sa->type != UBIFS_INO_NODE && sa->type != UBIFS_DENT_NODE &&
+		    sa->type != UBIFS_XENT_NODE) {
+			ubifs_err("bad node type %d", sa->type);
+			ubifs_dump_node(c, sa->node);
+			return -EINVAL;
+		}
+		if (sa->type != UBIFS_INO_NODE && sa->type != UBIFS_DENT_NODE &&
+		    sa->type != UBIFS_XENT_NODE) {
+			ubifs_err("bad node type %d", sb->type);
+			ubifs_dump_node(c, sb->node);
+			return -EINVAL;
+		}
+
+		if (sa->type != UBIFS_INO_NODE && sb->type == UBIFS_INO_NODE) {
+			ubifs_err("non-inode node goes before inode node");
+			goto error_dump;
+		}
+
+		if (sa->type == UBIFS_INO_NODE && sb->type != UBIFS_INO_NODE)
+			continue;
+
+		if (sa->type == UBIFS_INO_NODE && sb->type == UBIFS_INO_NODE) {
+			/* Inode nodes are sorted in descending size order */
+			if (sa->len < sb->len) {
+				ubifs_err("smaller inode node goes first");
+				goto error_dump;
+			}
+			continue;
+		}
+
+		/*
+		 * This is either a dentry or xentry, which should be sorted in
+		 * ascending (parent ino, hash) order.
+		 */
+		inuma = key_inum(c, &sa->key);
+		inumb = key_inum(c, &sb->key);
+
+		if (inuma < inumb)
+			continue;
+		if (inuma > inumb) {
+			ubifs_err("larger inum %lu goes before inum %lu",
+				  (unsigned long)inuma, (unsigned long)inumb);
+			goto error_dump;
+		}
+
+		hasha = key_block(c, &sa->key);
+		hashb = key_block(c, &sb->key);
+
+		if (hasha > hashb) {
+			ubifs_err("larger hash %u goes before %u",
+				  hasha, hashb);
+			goto error_dump;
+		}
+	}
+
+	return 0;
+
+error_dump:
+	ubifs_msg("dumping first node");
+	ubifs_dump_node(c, sa->node);
+	ubifs_msg("dumping second node");
+	ubifs_dump_node(c, sb->node);
+	return -EINVAL;
+	return 0;
+}
+
+static inline int chance(unsigned int n, unsigned int out_of)
+{
+	return !!((prandom_u32() % out_of) + 1 <= n);
+
+}
+
+static int power_cut_emulated(struct ubifs_info *c, int lnum, int write)
+{
+	struct ubifs_debug_info *d = c->dbg;
+
+	ubifs_assert(dbg_is_tst_rcvry(c));
+
+	if (!d->pc_cnt) {
+		/* First call - decide delay to the power cut */
+		if (chance(1, 2)) {
+			unsigned long delay;
+
+			if (chance(1, 2)) {
+				d->pc_delay = 1;
+				/* Fail withing 1 minute */
+				delay = prandom_u32() % 60000;
+				d->pc_timeout = jiffies;
+				d->pc_timeout += msecs_to_jiffies(delay);
+				ubifs_warn("failing after %lums", delay);
+			} else {
+				d->pc_delay = 2;
+				delay = prandom_u32() % 10000;
+				/* Fail within 10000 operations */
+				d->pc_cnt_max = delay;
+				ubifs_warn("failing after %lu calls", delay);
+			}
+		}
+
+		d->pc_cnt += 1;
+	}
+
+	/* Determine if failure delay has expired */
+	if (d->pc_delay == 1 && time_before(jiffies, d->pc_timeout))
+			return 0;
+	if (d->pc_delay == 2 && d->pc_cnt++ < d->pc_cnt_max)
+			return 0;
+
+	if (lnum == UBIFS_SB_LNUM) {
+		if (write && chance(1, 2))
+			return 0;
+		if (chance(19, 20))
+			return 0;
+		ubifs_warn("failing in super block LEB %d", lnum);
+	} else if (lnum == UBIFS_MST_LNUM || lnum == UBIFS_MST_LNUM + 1) {
+		if (chance(19, 20))
+			return 0;
+		ubifs_warn("failing in master LEB %d", lnum);
+	} else if (lnum >= UBIFS_LOG_LNUM && lnum <= c->log_last) {
+		if (write && chance(99, 100))
+			return 0;
+		if (chance(399, 400))
+			return 0;
+		ubifs_warn("failing in log LEB %d", lnum);
+	} else if (lnum >= c->lpt_first && lnum <= c->lpt_last) {
+		if (write && chance(7, 8))
+			return 0;
+		if (chance(19, 20))
+			return 0;
+		ubifs_warn("failing in LPT LEB %d", lnum);
+	} else if (lnum >= c->orph_first && lnum <= c->orph_last) {
+		if (write && chance(1, 2))
+			return 0;
+		if (chance(9, 10))
+			return 0;
+		ubifs_warn("failing in orphan LEB %d", lnum);
+	} else if (lnum == c->ihead_lnum) {
+		if (chance(99, 100))
+			return 0;
+		ubifs_warn("failing in index head LEB %d", lnum);
+	} else if (c->jheads && lnum == c->jheads[GCHD].wbuf.lnum) {
+		if (chance(9, 10))
+			return 0;
+		ubifs_warn("failing in GC head LEB %d", lnum);
+	} else if (write && !RB_EMPTY_ROOT(&c->buds) &&
+		   !ubifs_search_bud(c, lnum)) {
+		if (chance(19, 20))
+			return 0;
+		ubifs_warn("failing in non-bud LEB %d", lnum);
+	} else if (c->cmt_state == COMMIT_RUNNING_BACKGROUND ||
+		   c->cmt_state == COMMIT_RUNNING_REQUIRED) {
+		if (chance(999, 1000))
+			return 0;
+		ubifs_warn("failing in bud LEB %d commit running", lnum);
+	} else {
+		if (chance(9999, 10000))
+			return 0;
+		ubifs_warn("failing in bud LEB %d commit not running", lnum);
+	}
+
+	d->pc_happened = 1;
+	ubifs_warn("========== Power cut emulated ==========");
+	dump_stack();
+	return 1;
+}
+
+static int corrupt_data(const struct ubifs_info *c, const void *buf,
+			unsigned int len)
+{
+	unsigned int from, to, ffs = chance(1, 2);
+	unsigned char *p = (void *)buf;
+
+	from = prandom_u32() % len;
+	/* Corruption span max to end of write unit */
+	to = min(len, ALIGN(from + 1, c->max_write_size));
+
+	ubifs_warn("filled bytes %u-%u with %s", from, to - 1,
+		   ffs ? "0xFFs" : "random data");
+
+	if (ffs)
+		memset(p + from, 0xFF, to - from);
+	else
+		prandom_bytes(p + from, to - from);
+
+	return to;
+}
+
+int dbg_leb_write(struct ubifs_info *c, int lnum, const void *buf,
+		  int offs, int len)
+{
+	int err, failing;
+
+	if (c->dbg->pc_happened)
+		return -EROFS;
+
+	failing = power_cut_emulated(c, lnum, 1);
+	if (failing) {
+		len = corrupt_data(c, buf, len);
+		ubifs_warn("actually write %d bytes to LEB %d:%d (the buffer was corrupted)",
+			   len, lnum, offs);
+	}
+	err = ubi_leb_write(c->ubi, lnum, buf, offs, len);
+	if (err)
+		return err;
+	if (failing)
+		return -EROFS;
+	return 0;
+}
+
+int dbg_leb_change(struct ubifs_info *c, int lnum, const void *buf,
+		   int len)
+{
+	int err;
+
+	if (c->dbg->pc_happened)
+		return -EROFS;
+	if (power_cut_emulated(c, lnum, 1))
+		return -EROFS;
+	err = ubi_leb_change(c->ubi, lnum, buf, len);
+	if (err)
+		return err;
+	if (power_cut_emulated(c, lnum, 1))
+		return -EROFS;
+	return 0;
+}
+
+int dbg_leb_unmap(struct ubifs_info *c, int lnum)
+{
+	int err;
+
+	if (c->dbg->pc_happened)
+		return -EROFS;
+	if (power_cut_emulated(c, lnum, 0))
+		return -EROFS;
+	err = ubi_leb_unmap(c->ubi, lnum);
+	if (err)
+		return err;
+	if (power_cut_emulated(c, lnum, 0))
+		return -EROFS;
+	return 0;
+}
+
+int dbg_leb_map(struct ubifs_info *c, int lnum)
+{
+	int err;
+
+	if (c->dbg->pc_happened)
+		return -EROFS;
+	if (power_cut_emulated(c, lnum, 0))
+		return -EROFS;
+	err = ubi_leb_map(c->ubi, lnum);
+	if (err)
+		return err;
+	if (power_cut_emulated(c, lnum, 0))
+		return -EROFS;
+	return 0;
+}
+
+/*
+ * Root directory for UBIFS stuff in debugfs. Contains sub-directories which
+ * contain the stuff specific to particular file-system mounts.
+ */
+static struct dentry *dfs_rootdir;
+
+static int dfs_file_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return nonseekable_open(inode, file);
+}
+
+/**
+ * provide_user_output - provide output to the user reading a debugfs file.
+ * @val: boolean value for the answer
+ * @u: the buffer to store the answer at
+ * @count: size of the buffer
+ * @ppos: position in the @u output buffer
+ *
+ * This is a simple helper function which stores @val boolean value in the user
+ * buffer when the user reads one of UBIFS debugfs files. Returns amount of
+ * bytes written to @u in case of success and a negative error code in case of
+ * failure.
+ */
+static int provide_user_output(int val, char __user *u, size_t count,
+			       loff_t *ppos)
+{
+	char buf[3];
+
+	if (val)
+		buf[0] = '1';
+	else
+		buf[0] = '0';
+	buf[1] = '\n';
+	buf[2] = 0x00;
+
+	return simple_read_from_buffer(u, count, ppos, buf, 2);
+}
+
+static ssize_t dfs_file_read(struct file *file, char __user *u, size_t count,
+			     loff_t *ppos)
+{
+	struct dentry *dent = file->f_path.dentry;
+	struct ubifs_info *c = file->private_data;
+	struct ubifs_debug_info *d = c->dbg;
+	int val;
+
+	if (dent == d->dfs_chk_gen)
+		val = d->chk_gen;
+	else if (dent == d->dfs_chk_index)
+		val = d->chk_index;
+	else if (dent == d->dfs_chk_orph)
+		val = d->chk_orph;
+	else if (dent == d->dfs_chk_lprops)
+		val = d->chk_lprops;
+	else if (dent == d->dfs_chk_fs)
+		val = d->chk_fs;
+	else if (dent == d->dfs_tst_rcvry)
+		val = d->tst_rcvry;
+	else if (dent == d->dfs_ro_error)
+		val = c->ro_error;
+	else
+		return -EINVAL;
+
+	return provide_user_output(val, u, count, ppos);
+}
+
+/**
+ * interpret_user_input - interpret user debugfs file input.
+ * @u: user-provided buffer with the input
+ * @count: buffer size
+ *
+ * This is a helper function which interpret user input to a boolean UBIFS
+ * debugfs file. Returns %0 or %1 in case of success and a negative error code
+ * in case of failure.
+ */
+static int interpret_user_input(const char __user *u, size_t count)
+{
+	size_t buf_size;
+	char buf[8];
+
+	buf_size = min_t(size_t, count, (sizeof(buf) - 1));
+	if (copy_from_user(buf, u, buf_size))
+		return -EFAULT;
+
+	if (buf[0] == '1')
+		return 1;
+	else if (buf[0] == '0')
+		return 0;
+
+	return -EINVAL;
+}
+
+static ssize_t dfs_file_write(struct file *file, const char __user *u,
+			      size_t count, loff_t *ppos)
+{
+	struct ubifs_info *c = file->private_data;
+	struct ubifs_debug_info *d = c->dbg;
+	struct dentry *dent = file->f_path.dentry;
+	int val;
+
+	/*
+	 * TODO: this is racy - the file-system might have already been
+	 * unmounted and we'd oops in this case. The plan is to fix it with
+	 * help of 'iterate_supers_type()' which we should have in v3.0: when
+	 * a debugfs opened, we rember FS's UUID in file->private_data. Then
+	 * whenever we access the FS via a debugfs file, we iterate all UBIFS
+	 * superblocks and fine the one with the same UUID, and take the
+	 * locking right.
+	 *
+	 * The other way to go suggested by Al Viro is to create a separate
+	 * 'ubifs-debug' file-system instead.
+	 */
+	if (file->f_path.dentry == d->dfs_dump_lprops) {
+		ubifs_dump_lprops(c);
+		return count;
+	}
+	if (file->f_path.dentry == d->dfs_dump_budg) {
+		ubifs_dump_budg(c, &c->bi);
+		return count;
+	}
+	if (file->f_path.dentry == d->dfs_dump_tnc) {
+		mutex_lock(&c->tnc_mutex);
+		ubifs_dump_tnc(c);
+		mutex_unlock(&c->tnc_mutex);
+		return count;
+	}
+
+	val = interpret_user_input(u, count);
+	if (val < 0)
+		return val;
+
+	if (dent == d->dfs_chk_gen)
+		d->chk_gen = val;
+	else if (dent == d->dfs_chk_index)
+		d->chk_index = val;
+	else if (dent == d->dfs_chk_orph)
+		d->chk_orph = val;
+	else if (dent == d->dfs_chk_lprops)
+		d->chk_lprops = val;
+	else if (dent == d->dfs_chk_fs)
+		d->chk_fs = val;
+	else if (dent == d->dfs_tst_rcvry)
+		d->tst_rcvry = val;
+	else if (dent == d->dfs_ro_error)
+		c->ro_error = !!val;
+	else
+		return -EINVAL;
+
+	return count;
+}
+
+static const struct file_operations dfs_fops = {
+	.open = dfs_file_open,
+	.read = dfs_file_read,
+	.write = dfs_file_write,
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+};
+
+/**
+ * dbg_debugfs_init_fs - initialize debugfs for UBIFS instance.
+ * @c: UBIFS file-system description object
+ *
+ * This function creates all debugfs files for this instance of UBIFS. Returns
+ * zero in case of success and a negative error code in case of failure.
+ *
+ * Note, the only reason we have not merged this function with the
+ * 'ubifs_debugging_init()' function is because it is better to initialize
+ * debugfs interfaces at the very end of the mount process, and remove them at
+ * the very beginning of the mount process.
+ */
+int dbg_debugfs_init_fs(struct ubifs_info *c)
+{
+	int err, n;
+	const char *fname;
+	struct dentry *dent;
+	struct ubifs_debug_info *d = c->dbg;
+
+	if (!IS_ENABLED(CONFIG_DEBUG_FS))
+		return 0;
+
+	n = snprintf(d->dfs_dir_name, UBIFS_DFS_DIR_LEN + 1, UBIFS_DFS_DIR_NAME,
+		     c->vi.ubi_num, c->vi.vol_id);
+	if (n == UBIFS_DFS_DIR_LEN) {
+		/* The array size is too small */
+		fname = UBIFS_DFS_DIR_NAME;
+		dent = ERR_PTR(-EINVAL);
+		goto out;
+	}
+
+	fname = d->dfs_dir_name;
+	dent = debugfs_create_dir(fname, dfs_rootdir);
+	if (IS_ERR_OR_NULL(dent))
+		goto out;
+	d->dfs_dir = dent;
+
+	fname = "dump_lprops";
+	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, c, &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_dump_lprops = dent;
+
+	fname = "dump_budg";
+	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, c, &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_dump_budg = dent;
+
+	fname = "dump_tnc";
+	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, c, &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_dump_tnc = dent;
+
+	fname = "chk_general";
+	dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, d->dfs_dir, c,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_chk_gen = dent;
+
+	fname = "chk_index";
+	dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, d->dfs_dir, c,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_chk_index = dent;
+
+	fname = "chk_orphans";
+	dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, d->dfs_dir, c,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_chk_orph = dent;
+
+	fname = "chk_lprops";
+	dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, d->dfs_dir, c,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_chk_lprops = dent;
+
+	fname = "chk_fs";
+	dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, d->dfs_dir, c,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_chk_fs = dent;
+
+	fname = "tst_recovery";
+	dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, d->dfs_dir, c,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_tst_rcvry = dent;
+
+	fname = "ro_error";
+	dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, d->dfs_dir, c,
+				   &dfs_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	d->dfs_ro_error = dent;
+
+	return 0;
+
+out_remove:
+	debugfs_remove_recursive(d->dfs_dir);
+out:
+	err = dent ? PTR_ERR(dent) : -ENODEV;
+	ubifs_err("cannot create \"%s\" debugfs file or directory, error %d\n",
+		  fname, err);
+	return err;
+}
+
+/**
+ * dbg_debugfs_exit_fs - remove all debugfs files.
+ * @c: UBIFS file-system description object
+ */
+void dbg_debugfs_exit_fs(struct ubifs_info *c)
+{
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
+		debugfs_remove_recursive(c->dbg->dfs_dir);
+}
+
+struct ubifs_global_debug_info ubifs_dbg;
+
+static struct dentry *dfs_chk_gen;
+static struct dentry *dfs_chk_index;
+static struct dentry *dfs_chk_orph;
+static struct dentry *dfs_chk_lprops;
+static struct dentry *dfs_chk_fs;
+static struct dentry *dfs_tst_rcvry;
+
+static ssize_t dfs_global_file_read(struct file *file, char __user *u,
+				    size_t count, loff_t *ppos)
+{
+	struct dentry *dent = file->f_path.dentry;
+	int val;
+
+	if (dent == dfs_chk_gen)
+		val = ubifs_dbg.chk_gen;
+	else if (dent == dfs_chk_index)
+		val = ubifs_dbg.chk_index;
+	else if (dent == dfs_chk_orph)
+		val = ubifs_dbg.chk_orph;
+	else if (dent == dfs_chk_lprops)
+		val = ubifs_dbg.chk_lprops;
+	else if (dent == dfs_chk_fs)
+		val = ubifs_dbg.chk_fs;
+	else if (dent == dfs_tst_rcvry)
+		val = ubifs_dbg.tst_rcvry;
+	else
+		return -EINVAL;
+
+	return provide_user_output(val, u, count, ppos);
+}
+
+static ssize_t dfs_global_file_write(struct file *file, const char __user *u,
+				     size_t count, loff_t *ppos)
+{
+	struct dentry *dent = file->f_path.dentry;
+	int val;
+
+	val = interpret_user_input(u, count);
+	if (val < 0)
+		return val;
+
+	if (dent == dfs_chk_gen)
+		ubifs_dbg.chk_gen = val;
+	else if (dent == dfs_chk_index)
+		ubifs_dbg.chk_index = val;
+	else if (dent == dfs_chk_orph)
+		ubifs_dbg.chk_orph = val;
+	else if (dent == dfs_chk_lprops)
+		ubifs_dbg.chk_lprops = val;
+	else if (dent == dfs_chk_fs)
+		ubifs_dbg.chk_fs = val;
+	else if (dent == dfs_tst_rcvry)
+		ubifs_dbg.tst_rcvry = val;
+	else
+		return -EINVAL;
+
+	return count;
+}
+
+static const struct file_operations dfs_global_fops = {
+	.read = dfs_global_file_read,
+	.write = dfs_global_file_write,
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+};
+
+/**
+ * dbg_debugfs_init - initialize debugfs file-system.
+ *
+ * UBIFS uses debugfs file-system to expose various debugging knobs to
+ * user-space. This function creates "ubifs" directory in the debugfs
+ * file-system. Returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+int dbg_debugfs_init(void)
+{
+	int err;
+	const char *fname;
+	struct dentry *dent;
+
+	if (!IS_ENABLED(CONFIG_DEBUG_FS))
+		return 0;
+
+	fname = "ubifs";
+	dent = debugfs_create_dir(fname, NULL);
+	if (IS_ERR_OR_NULL(dent))
+		goto out;
+	dfs_rootdir = dent;
+
+	fname = "chk_general";
+	dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, dfs_rootdir, NULL,
+				   &dfs_global_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	dfs_chk_gen = dent;
+
+	fname = "chk_index";
+	dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, dfs_rootdir, NULL,
+				   &dfs_global_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	dfs_chk_index = dent;
+
+	fname = "chk_orphans";
+	dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, dfs_rootdir, NULL,
+				   &dfs_global_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	dfs_chk_orph = dent;
+
+	fname = "chk_lprops";
+	dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, dfs_rootdir, NULL,
+				   &dfs_global_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	dfs_chk_lprops = dent;
+
+	fname = "chk_fs";
+	dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, dfs_rootdir, NULL,
+				   &dfs_global_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	dfs_chk_fs = dent;
+
+	fname = "tst_recovery";
+	dent = debugfs_create_file(fname, S_IRUSR | S_IWUSR, dfs_rootdir, NULL,
+				   &dfs_global_fops);
+	if (IS_ERR_OR_NULL(dent))
+		goto out_remove;
+	dfs_tst_rcvry = dent;
+
+	return 0;
+
+out_remove:
+	debugfs_remove_recursive(dfs_rootdir);
+out:
+	err = dent ? PTR_ERR(dent) : -ENODEV;
+	ubifs_err("cannot create \"%s\" debugfs file or directory, error %d\n",
+		  fname, err);
+	return err;
+}
+
+/**
+ * dbg_debugfs_exit - remove the "ubifs" directory from debugfs file-system.
+ */
+void dbg_debugfs_exit(void)
+{
+	if (IS_ENABLED(CONFIG_DEBUG_FS))
+		debugfs_remove_recursive(dfs_rootdir);
+}
+
+/**
+ * ubifs_debugging_init - initialize UBIFS debugging.
+ * @c: UBIFS file-system description object
+ *
+ * This function initializes debugging-related data for the file system.
+ * Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+int ubifs_debugging_init(struct ubifs_info *c)
+{
+	c->dbg = kzalloc(sizeof(struct ubifs_debug_info), GFP_KERNEL);
+	if (!c->dbg)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/**
+ * ubifs_debugging_exit - free debugging data.
+ * @c: UBIFS file-system description object
+ */
+void ubifs_debugging_exit(struct ubifs_info *c)
+{
+	kfree(c->dbg);
+}
+#endif
diff --git a/fs/ubifs/debug.h b/fs/ubifs/debug.h
index 62617b6..6d325af 100644
--- a/fs/ubifs/debug.h
+++ b/fs/ubifs/debug.h
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Artem Bityutskiy (Битюцкий Артём)
  *          Adrian Hunter
@@ -23,19 +12,32 @@
 #ifndef __UBIFS_DEBUG_H__
 #define __UBIFS_DEBUG_H__
 
-#ifdef CONFIG_UBIFS_FS_DEBUG
+#define __UBOOT__
+/* Checking helper functions */
+typedef int (*dbg_leaf_callback)(struct ubifs_info *c,
+				 struct ubifs_zbranch *zbr, void *priv);
+typedef int (*dbg_znode_callback)(struct ubifs_info *c,
+				  struct ubifs_znode *znode, void *priv);
+
+/*
+ * The UBIFS debugfs directory name pattern and maximum name length (3 for "ubi"
+ * + 1 for "_" and plus 2x2 for 2 UBI numbers and 1 for the trailing zero byte.
+ */
+#define UBIFS_DFS_DIR_NAME "ubi%d_%d"
+#define UBIFS_DFS_DIR_LEN  (3 + 1 + 2*2 + 1)
 
 /**
  * ubifs_debug_info - per-FS debugging information.
- * @buf: a buffer of LEB size, used for various purposes
  * @old_zroot: old index root - used by 'dbg_check_old_index()'
  * @old_zroot_level: old index root level - used by 'dbg_check_old_index()'
  * @old_zroot_sqnum: old index root sqnum - used by 'dbg_check_old_index()'
- * @failure_mode: failure mode for recovery testing
- * @fail_delay: 0=>don't delay, 1=>delay a time, 2=>delay a number of calls
- * @fail_timeout: time in jiffies when delay of failure mode expires
- * @fail_cnt: current number of calls to failure mode I/O functions
- * @fail_cnt_max: number of calls by which to delay failure mode
+ *
+ * @pc_happened: non-zero if an emulated power cut happened
+ * @pc_delay: 0=>don't delay, 1=>delay a time, 2=>delay a number of calls
+ * @pc_timeout: time in jiffies when delay of failure mode expires
+ * @pc_cnt: current number of calls to failure mode I/O functions
+ * @pc_cnt_max: number of calls by which to delay failure mode
+ *
  * @chk_lpt_sz: used by LPT tree size checker
  * @chk_lpt_sz2: used by LPT tree size checker
  * @chk_lpt_wastage: used by LPT tree size checker
@@ -45,24 +47,44 @@
  * @new_ihead_offs: used by debugging to check @c->ihead_offs
  *
  * @saved_lst: saved lprops statistics (used by 'dbg_save_space_info()')
- * @saved_free: saved free space (used by 'dbg_save_space_info()')
+ * @saved_bi: saved budgeting information
+ * @saved_free: saved amount of free space
+ * @saved_idx_gc_cnt: saved value of @c->idx_gc_cnt
+ *
+ * @chk_gen: if general extra checks are enabled
+ * @chk_index: if index xtra checks are enabled
+ * @chk_orph: if orphans extra checks are enabled
+ * @chk_lprops: if lprops extra checks are enabled
+ * @chk_fs: if UBIFS contents extra checks are enabled
+ * @tst_rcvry: if UBIFS recovery testing mode enabled
  *
- * dfs_dir_name: name of debugfs directory containing this file-system's files
- * dfs_dir: direntry object of the file-system debugfs directory
- * dfs_dump_lprops: "dump lprops" debugfs knob
- * dfs_dump_budg: "dump budgeting information" debugfs knob
- * dfs_dump_tnc: "dump TNC" debugfs knob
+ * @dfs_dir_name: name of debugfs directory containing this file-system's files
+ * @dfs_dir: direntry object of the file-system debugfs directory
+ * @dfs_dump_lprops: "dump lprops" debugfs knob
+ * @dfs_dump_budg: "dump budgeting information" debugfs knob
+ * @dfs_dump_tnc: "dump TNC" debugfs knob
+ * @dfs_chk_gen: debugfs knob to enable UBIFS general extra checks
+ * @dfs_chk_index: debugfs knob to enable UBIFS index extra checks
+ * @dfs_chk_orph: debugfs knob to enable UBIFS orphans extra checks
+ * @dfs_chk_lprops: debugfs knob to enable UBIFS LEP properties extra checks
+ * @dfs_chk_fs: debugfs knob to enable UBIFS contents extra checks
+ * @dfs_tst_rcvry: debugfs knob to enable UBIFS recovery testing
+ * @dfs_ro_error: debugfs knob to switch UBIFS to R/O mode (different to
+ *                re-mounting to R/O mode because it does not flush any buffers
+ *                and UBIFS just starts returning -EROFS on all write
+ *               operations)
  */
 struct ubifs_debug_info {
-	void *buf;
 	struct ubifs_zbranch old_zroot;
 	int old_zroot_level;
 	unsigned long long old_zroot_sqnum;
-	int failure_mode;
-	int fail_delay;
-	unsigned long fail_timeout;
-	unsigned int fail_cnt;
-	unsigned int fail_cnt_max;
+
+	int pc_happened;
+	int pc_delay;
+	unsigned long pc_timeout;
+	unsigned int pc_cnt;
+	unsigned int pc_cnt_max;
+
 	long long chk_lpt_sz;
 	long long chk_lpt_sz2;
 	long long chk_lpt_wastage;
@@ -72,321 +94,285 @@ struct ubifs_debug_info {
 	int new_ihead_offs;
 
 	struct ubifs_lp_stats saved_lst;
+	struct ubifs_budg_info saved_bi;
 	long long saved_free;
+	int saved_idx_gc_cnt;
+
+	unsigned int chk_gen:1;
+	unsigned int chk_index:1;
+	unsigned int chk_orph:1;
+	unsigned int chk_lprops:1;
+	unsigned int chk_fs:1;
+	unsigned int tst_rcvry:1;
 
-	char dfs_dir_name[100];
+	char dfs_dir_name[UBIFS_DFS_DIR_LEN + 1];
 	struct dentry *dfs_dir;
 	struct dentry *dfs_dump_lprops;
 	struct dentry *dfs_dump_budg;
 	struct dentry *dfs_dump_tnc;
+	struct dentry *dfs_chk_gen;
+	struct dentry *dfs_chk_index;
+	struct dentry *dfs_chk_orph;
+	struct dentry *dfs_chk_lprops;
+	struct dentry *dfs_chk_fs;
+	struct dentry *dfs_tst_rcvry;
+	struct dentry *dfs_ro_error;
 };
 
-#define UBIFS_DBG(op) op
+/**
+ * ubifs_global_debug_info - global (not per-FS) UBIFS debugging information.
+ *
+ * @chk_gen: if general extra checks are enabled
+ * @chk_index: if index xtra checks are enabled
+ * @chk_orph: if orphans extra checks are enabled
+ * @chk_lprops: if lprops extra checks are enabled
+ * @chk_fs: if UBIFS contents extra checks are enabled
+ * @tst_rcvry: if UBIFS recovery testing mode enabled
+ */
+struct ubifs_global_debug_info {
+	unsigned int chk_gen:1;
+	unsigned int chk_index:1;
+	unsigned int chk_orph:1;
+	unsigned int chk_lprops:1;
+	unsigned int chk_fs:1;
+	unsigned int tst_rcvry:1;
+};
 
+#ifndef __UBOOT__
 #define ubifs_assert(expr) do {                                                \
 	if (unlikely(!(expr))) {                                               \
-		printk(KERN_CRIT "UBIFS assert failed in %s at %u (pid %d)\n", \
-		       __func__, __LINE__, 0);                      \
-		dbg_dump_stack();                                              \
+		pr_crit("UBIFS assert failed in %s at %u (pid %d)\n",          \
+		       __func__, __LINE__, current->pid);                      \
+		dump_stack();                                                  \
 	}                                                                      \
 } while (0)
 
 #define ubifs_assert_cmt_locked(c) do {                                        \
 	if (unlikely(down_write_trylock(&(c)->commit_sem))) {                  \
 		up_write(&(c)->commit_sem);                                    \
-		printk(KERN_CRIT "commit lock is not locked!\n");              \
+		pr_crit("commit lock is not locked!\n");                       \
 		ubifs_assert(0);                                               \
 	}                                                                      \
 } while (0)
 
-#define dbg_dump_stack() do {                                                  \
-	if (!dbg_failure_mode)                                                 \
+#define ubifs_dbg_msg(type, fmt, ...) \
+	pr_debug("UBIFS DBG " type " (pid %d): " fmt "\n", current->pid,       \
+		 ##__VA_ARGS__)
+
+#define DBG_KEY_BUF_LEN 48
+#define ubifs_dbg_msg_key(type, key, fmt, ...) do {                            \
+	char __tmp_key_buf[DBG_KEY_BUF_LEN];                                   \
+	pr_debug("UBIFS DBG " type " (pid %d): " fmt "%s\n", current->pid,     \
+		 ##__VA_ARGS__,                                                \
+		 dbg_snprintf_key(c, key, __tmp_key_buf, DBG_KEY_BUF_LEN));    \
+} while (0)
+#else
+#define ubifs_assert(expr) do {                                                \
+	if (unlikely(!(expr))) {                                               \
+		pr_crit("UBIFS assert failed in %s at %u\n",                   \
+		       __func__, __LINE__);                                    \
 		dump_stack();                                                  \
+	}                                                                      \
 } while (0)
 
-/* Generic debugging messages */
-#define dbg_msg(fmt, ...) do {                                                 \
-	spin_lock(&dbg_lock);                                                  \
-	printk(KERN_DEBUG "UBIFS DBG (pid %d): %s: " fmt "\n", 0,   \
-	       __func__, ##__VA_ARGS__);                                       \
-	spin_unlock(&dbg_lock);                                                \
+#define ubifs_assert_cmt_locked(c) do {                                        \
+	if (unlikely(down_write_trylock(&(c)->commit_sem))) {                  \
+		up_write(&(c)->commit_sem);                                    \
+		pr_crit("commit lock is not locked!\n");                       \
+		ubifs_assert(0);                                               \
+	}                                                                      \
 } while (0)
 
-#define dbg_do_msg(typ, fmt, ...) do {                                         \
-	if (ubifs_msg_flags & typ)                                             \
-		dbg_msg(fmt, ##__VA_ARGS__);                                   \
+#define ubifs_dbg_msg(type, fmt, ...) \
+	pr_debug("UBIFS DBG " type ": " fmt "\n",                              \
+		 ##__VA_ARGS__)
+
+#define DBG_KEY_BUF_LEN 48
+#if defined CONFIG_MTD_DEBUG
+#define ubifs_dbg_msg_key(type, key, fmt, ...) do {                            \
+	char __tmp_key_buf[DBG_KEY_BUF_LEN];                                   \
+	pr_debug("UBIFS DBG " type ": " fmt "%s\n",                            \
+		 ##__VA_ARGS__,                                                \
+		 dbg_snprintf_key(c, key, __tmp_key_buf, DBG_KEY_BUF_LEN));    \
 } while (0)
-
-#define dbg_err(fmt, ...) do {                                                 \
-	spin_lock(&dbg_lock);                                                  \
-	ubifs_err(fmt, ##__VA_ARGS__);                                         \
-	spin_unlock(&dbg_lock);                                                \
+#else
+#define ubifs_dbg_msg_key(type, key, fmt, ...) do {                            \
+	pr_debug("UBIFS DBG\n");                                               \
 } while (0)
 
-const char *dbg_key_str0(const struct ubifs_info *c,
-			 const union ubifs_key *key);
-const char *dbg_key_str1(const struct ubifs_info *c,
-			 const union ubifs_key *key);
+#endif
 
-/*
- * DBGKEY macros require @dbg_lock to be held, which it is in the dbg message
- * macros.
- */
-#define DBGKEY(key)	dbg_key_str0(c, (key))
-#define DBGKEY1(key)	dbg_key_str1(c, (key))
+#endif
 
 /* General messages */
-#define dbg_gen(fmt, ...)   dbg_do_msg(UBIFS_MSG_GEN, fmt, ##__VA_ARGS__)
-
+#define dbg_gen(fmt, ...)   ubifs_dbg_msg("gen", fmt, ##__VA_ARGS__)
 /* Additional journal messages */
-#define dbg_jnl(fmt, ...)   dbg_do_msg(UBIFS_MSG_JNL, fmt, ##__VA_ARGS__)
-
+#define dbg_jnl(fmt, ...)   ubifs_dbg_msg("jnl", fmt, ##__VA_ARGS__)
+#define dbg_jnlk(key, fmt, ...) \
+	ubifs_dbg_msg_key("jnl", key, fmt, ##__VA_ARGS__)
 /* Additional TNC messages */
-#define dbg_tnc(fmt, ...)   dbg_do_msg(UBIFS_MSG_TNC, fmt, ##__VA_ARGS__)
-
+#define dbg_tnc(fmt, ...)   ubifs_dbg_msg("tnc", fmt, ##__VA_ARGS__)
+#define dbg_tnck(key, fmt, ...) \
+	ubifs_dbg_msg_key("tnc", key, fmt, ##__VA_ARGS__)
 /* Additional lprops messages */
-#define dbg_lp(fmt, ...)    dbg_do_msg(UBIFS_MSG_LP, fmt, ##__VA_ARGS__)
-
+#define dbg_lp(fmt, ...)    ubifs_dbg_msg("lp", fmt, ##__VA_ARGS__)
 /* Additional LEB find messages */
-#define dbg_find(fmt, ...)  dbg_do_msg(UBIFS_MSG_FIND, fmt, ##__VA_ARGS__)
-
+#define dbg_find(fmt, ...)  ubifs_dbg_msg("find", fmt, ##__VA_ARGS__)
 /* Additional mount messages */
-#define dbg_mnt(fmt, ...)   dbg_do_msg(UBIFS_MSG_MNT, fmt, ##__VA_ARGS__)
-
+#define dbg_mnt(fmt, ...)   ubifs_dbg_msg("mnt", fmt, ##__VA_ARGS__)
+#define dbg_mntk(key, fmt, ...) \
+	ubifs_dbg_msg_key("mnt", key, fmt, ##__VA_ARGS__)
 /* Additional I/O messages */
-#define dbg_io(fmt, ...)    dbg_do_msg(UBIFS_MSG_IO, fmt, ##__VA_ARGS__)
-
+#define dbg_io(fmt, ...)    ubifs_dbg_msg("io", fmt, ##__VA_ARGS__)
 /* Additional commit messages */
-#define dbg_cmt(fmt, ...)   dbg_do_msg(UBIFS_MSG_CMT, fmt, ##__VA_ARGS__)
-
+#define dbg_cmt(fmt, ...)   ubifs_dbg_msg("cmt", fmt, ##__VA_ARGS__)
 /* Additional budgeting messages */
-#define dbg_budg(fmt, ...)  dbg_do_msg(UBIFS_MSG_BUDG, fmt, ##__VA_ARGS__)
-
+#define dbg_budg(fmt, ...)  ubifs_dbg_msg("budg", fmt, ##__VA_ARGS__)
 /* Additional log messages */
-#define dbg_log(fmt, ...)   dbg_do_msg(UBIFS_MSG_LOG, fmt, ##__VA_ARGS__)
-
+#define dbg_log(fmt, ...)   ubifs_dbg_msg("log", fmt, ##__VA_ARGS__)
 /* Additional gc messages */
-#define dbg_gc(fmt, ...)    dbg_do_msg(UBIFS_MSG_GC, fmt, ##__VA_ARGS__)
-
+#define dbg_gc(fmt, ...)    ubifs_dbg_msg("gc", fmt, ##__VA_ARGS__)
 /* Additional scan messages */
-#define dbg_scan(fmt, ...)  dbg_do_msg(UBIFS_MSG_SCAN, fmt, ##__VA_ARGS__)
-
+#define dbg_scan(fmt, ...)  ubifs_dbg_msg("scan", fmt, ##__VA_ARGS__)
 /* Additional recovery messages */
-#define dbg_rcvry(fmt, ...) dbg_do_msg(UBIFS_MSG_RCVRY, fmt, ##__VA_ARGS__)
+#define dbg_rcvry(fmt, ...) ubifs_dbg_msg("rcvry", fmt, ##__VA_ARGS__)
+
+#ifndef __UBOOT__
+extern struct ubifs_global_debug_info ubifs_dbg;
+
+static inline int dbg_is_chk_gen(const struct ubifs_info *c)
+{
+	return !!(ubifs_dbg.chk_gen || c->dbg->chk_gen);
+}
+static inline int dbg_is_chk_index(const struct ubifs_info *c)
+{
+	return !!(ubifs_dbg.chk_index || c->dbg->chk_index);
+}
+static inline int dbg_is_chk_orph(const struct ubifs_info *c)
+{
+	return !!(ubifs_dbg.chk_orph || c->dbg->chk_orph);
+}
+static inline int dbg_is_chk_lprops(const struct ubifs_info *c)
+{
+	return !!(ubifs_dbg.chk_lprops || c->dbg->chk_lprops);
+}
+static inline int dbg_is_chk_fs(const struct ubifs_info *c)
+{
+	return !!(ubifs_dbg.chk_fs || c->dbg->chk_fs);
+}
+static inline int dbg_is_tst_rcvry(const struct ubifs_info *c)
+{
+	return !!(ubifs_dbg.tst_rcvry || c->dbg->tst_rcvry);
+}
+static inline int dbg_is_power_cut(const struct ubifs_info *c)
+{
+	return !!c->dbg->pc_happened;
+}
 
-/*
- * Debugging message type flags (must match msg_type_names in debug.c).
- *
- * UBIFS_MSG_GEN: general messages
- * UBIFS_MSG_JNL: journal messages
- * UBIFS_MSG_MNT: mount messages
- * UBIFS_MSG_CMT: commit messages
- * UBIFS_MSG_FIND: LEB find messages
- * UBIFS_MSG_BUDG: budgeting messages
- * UBIFS_MSG_GC: garbage collection messages
- * UBIFS_MSG_TNC: TNC messages
- * UBIFS_MSG_LP: lprops messages
- * UBIFS_MSG_IO: I/O messages
- * UBIFS_MSG_LOG: log messages
- * UBIFS_MSG_SCAN: scan messages
- * UBIFS_MSG_RCVRY: recovery messages
- */
-enum {
-	UBIFS_MSG_GEN   = 0x1,
-	UBIFS_MSG_JNL   = 0x2,
-	UBIFS_MSG_MNT   = 0x4,
-	UBIFS_MSG_CMT   = 0x8,
-	UBIFS_MSG_FIND  = 0x10,
-	UBIFS_MSG_BUDG  = 0x20,
-	UBIFS_MSG_GC    = 0x40,
-	UBIFS_MSG_TNC   = 0x80,
-	UBIFS_MSG_LP    = 0x100,
-	UBIFS_MSG_IO    = 0x200,
-	UBIFS_MSG_LOG   = 0x400,
-	UBIFS_MSG_SCAN  = 0x800,
-	UBIFS_MSG_RCVRY = 0x1000,
-};
-
-/* Debugging message type flags for each default debug message level */
-#define UBIFS_MSG_LVL_0 0
-#define UBIFS_MSG_LVL_1 0x1
-#define UBIFS_MSG_LVL_2 0x7f
-#define UBIFS_MSG_LVL_3 0xffff
-
-/*
- * Debugging check flags (must match chk_names in debug.c).
- *
- * UBIFS_CHK_GEN: general checks
- * UBIFS_CHK_TNC: check TNC
- * UBIFS_CHK_IDX_SZ: check index size
- * UBIFS_CHK_ORPH: check orphans
- * UBIFS_CHK_OLD_IDX: check the old index
- * UBIFS_CHK_LPROPS: check lprops
- * UBIFS_CHK_FS: check the file-system
- */
-enum {
-	UBIFS_CHK_GEN     = 0x1,
-	UBIFS_CHK_TNC     = 0x2,
-	UBIFS_CHK_IDX_SZ  = 0x4,
-	UBIFS_CHK_ORPH    = 0x8,
-	UBIFS_CHK_OLD_IDX = 0x10,
-	UBIFS_CHK_LPROPS  = 0x20,
-	UBIFS_CHK_FS      = 0x40,
-};
-
-/*
- * Special testing flags (must match tst_names in debug.c).
- *
- * UBIFS_TST_FORCE_IN_THE_GAPS: force the use of in-the-gaps method
- * UBIFS_TST_RCVRY: failure mode for recovery testing
- */
-enum {
-	UBIFS_TST_FORCE_IN_THE_GAPS = 0x2,
-	UBIFS_TST_RCVRY             = 0x4,
-};
-
-#if CONFIG_UBIFS_FS_DEBUG_MSG_LVL == 1
-#define UBIFS_MSG_FLAGS_DEFAULT UBIFS_MSG_LVL_1
-#elif CONFIG_UBIFS_FS_DEBUG_MSG_LVL == 2
-#define UBIFS_MSG_FLAGS_DEFAULT UBIFS_MSG_LVL_2
-#elif CONFIG_UBIFS_FS_DEBUG_MSG_LVL == 3
-#define UBIFS_MSG_FLAGS_DEFAULT UBIFS_MSG_LVL_3
-#else
-#define UBIFS_MSG_FLAGS_DEFAULT UBIFS_MSG_LVL_0
-#endif
-
-#ifdef CONFIG_UBIFS_FS_DEBUG_CHKS
-#define UBIFS_CHK_FLAGS_DEFAULT 0xffffffff
+int ubifs_debugging_init(struct ubifs_info *c);
+void ubifs_debugging_exit(struct ubifs_info *c);
 #else
-#define UBIFS_CHK_FLAGS_DEFAULT 0
-#endif
-
-#define dbg_ntype(type)                       ""
-#define dbg_cstate(cmt_state)                 ""
-#define dbg_get_key_dump(c, key)              ({})
-#define dbg_dump_inode(c, inode)              ({})
-#define dbg_dump_node(c, node)                ({})
-#define dbg_dump_budget_req(req)              ({})
-#define dbg_dump_lstats(lst)                  ({})
-#define dbg_dump_budg(c)                      ({})
-#define dbg_dump_lprop(c, lp)                 ({})
-#define dbg_dump_lprops(c)                    ({})
-#define dbg_dump_lpt_info(c)                  ({})
-#define dbg_dump_leb(c, lnum)                 ({})
-#define dbg_dump_znode(c, znode)              ({})
-#define dbg_dump_heap(c, heap, cat)           ({})
-#define dbg_dump_pnode(c, pnode, parent, iip) ({})
-#define dbg_dump_tnc(c)                       ({})
-#define dbg_dump_index(c)                     ({})
-
-#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0
-#define dbg_old_index_check_init(c, zroot)         0
-#define dbg_check_old_index(c, zroot)              0
-#define dbg_check_cats(c)                          0
-#define dbg_check_ltab(c)                          0
-#define dbg_chk_lpt_free_spc(c)                    0
-#define dbg_chk_lpt_sz(c, action, len)             0
-#define dbg_check_synced_i_size(inode)             0
-#define dbg_check_dir_size(c, dir)                 0
-#define dbg_check_tnc(c, x)                        0
-#define dbg_check_idx_size(c, idx_size)            0
-#define dbg_check_filesystem(c)                    0
-#define dbg_check_heap(c, heap, cat, add_pos)      ({})
-#define dbg_check_lprops(c)                        0
-#define dbg_check_lpt_nodes(c, cnode, row, col)    0
-#define dbg_force_in_the_gaps_enabled              0
-#define dbg_force_in_the_gaps()                    0
-#define dbg_failure_mode                           0
-#define dbg_failure_mode_registration(c)           ({})
-#define dbg_failure_mode_deregistration(c)         ({})
+static inline int dbg_is_chk_gen(const struct ubifs_info *c)
+{
+	return 0;
+}
+static inline int dbg_is_chk_index(const struct ubifs_info *c)
+{
+	return 0;
+}
+static inline int dbg_is_chk_orph(const struct ubifs_info *c)
+{
+	return 0;
+}
+static inline int dbg_is_chk_lprops(const struct ubifs_info *c)
+{
+	return 0;
+}
+static inline int dbg_is_chk_fs(const struct ubifs_info *c)
+{
+	return 0;
+}
+static inline int dbg_is_tst_rcvry(const struct ubifs_info *c)
+{
+	return 0;
+}
+static inline int dbg_is_power_cut(const struct ubifs_info *c)
+{
+	return 0;
+}
 
 int ubifs_debugging_init(struct ubifs_info *c);
 void ubifs_debugging_exit(struct ubifs_info *c);
 
-#else /* !CONFIG_UBIFS_FS_DEBUG */
-
-#define UBIFS_DBG(op)
-
-/* Use "if (0)" to make compiler check arguments even if debugging is off */
-#define ubifs_assert(expr)  do {                                               \
-	if (0 && (expr))                                                       \
-		printk(KERN_CRIT "UBIFS assert failed in %s at %u (pid %d)\n", \
-		       __func__, __LINE__, 0);                      \
-} while (0)
-
-#define dbg_err(fmt, ...)   do {                                               \
-	if (0)                                                                 \
-		ubifs_err(fmt, ##__VA_ARGS__);                                 \
-} while (0)
-
-#define dbg_msg(fmt, ...) do {                                                 \
-	if (0)                                                                 \
-		printk(KERN_DEBUG "UBIFS DBG (pid %d): %s: " fmt "\n",         \
-		       0, __func__, ##__VA_ARGS__);                 \
-} while (0)
-
-#define dbg_dump_stack()
-#define ubifs_assert_cmt_locked(c)
-
-#define dbg_gen(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_jnl(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_tnc(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_lp(fmt, ...)    dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_find(fmt, ...)  dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_mnt(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_io(fmt, ...)    dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_cmt(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_budg(fmt, ...)  dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_log(fmt, ...)   dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_gc(fmt, ...)    dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_scan(fmt, ...)  dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_rcvry(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
-
-#define DBGKEY(key)  ((char *)(key))
-#define DBGKEY1(key) ((char *)(key))
-
-#define ubifs_debugging_init(c)                0
-#define ubifs_debugging_exit(c)                ({})
-
-#define dbg_ntype(type)                       ""
-#define dbg_cstate(cmt_state)                 ""
-#define dbg_get_key_dump(c, key)              ({})
-#define dbg_dump_inode(c, inode)              ({})
-#define dbg_dump_node(c, node)                ({})
-#define dbg_dump_budget_req(req)              ({})
-#define dbg_dump_lstats(lst)                  ({})
-#define dbg_dump_budg(c)                      ({})
-#define dbg_dump_lprop(c, lp)                 ({})
-#define dbg_dump_lprops(c)                    ({})
-#define dbg_dump_lpt_info(c)                  ({})
-#define dbg_dump_leb(c, lnum)                 ({})
-#define dbg_dump_znode(c, znode)              ({})
-#define dbg_dump_heap(c, heap, cat)           ({})
-#define dbg_dump_pnode(c, pnode, parent, iip) ({})
-#define dbg_dump_tnc(c)                       ({})
-#define dbg_dump_index(c)                     ({})
-
-#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0
-#define dbg_old_index_check_init(c, zroot)         0
-#define dbg_check_old_index(c, zroot)              0
-#define dbg_check_cats(c)                          0
-#define dbg_check_ltab(c)                          0
-#define dbg_chk_lpt_free_spc(c)                    0
-#define dbg_chk_lpt_sz(c, action, len)             0
-#define dbg_check_synced_i_size(inode)             0
-#define dbg_check_dir_size(c, dir)                 0
-#define dbg_check_tnc(c, x)                        0
-#define dbg_check_idx_size(c, idx_size)            0
-#define dbg_check_filesystem(c)                    0
-#define dbg_check_heap(c, heap, cat, add_pos)      ({})
-#define dbg_check_lprops(c)                        0
-#define dbg_check_lpt_nodes(c, cnode, row, col)    0
-#define dbg_force_in_the_gaps_enabled              0
-#define dbg_force_in_the_gaps()                    0
-#define dbg_failure_mode                           0
-#define dbg_failure_mode_registration(c)           ({})
-#define dbg_failure_mode_deregistration(c)         ({})
+#endif
 
-#endif /* !CONFIG_UBIFS_FS_DEBUG */
+/* Dump functions */
+const char *dbg_ntype(int type);
+const char *dbg_cstate(int cmt_state);
+const char *dbg_jhead(int jhead);
+const char *dbg_get_key_dump(const struct ubifs_info *c,
+			     const union ubifs_key *key);
+const char *dbg_snprintf_key(const struct ubifs_info *c,
+			     const union ubifs_key *key, char *buffer, int len);
+void ubifs_dump_inode(struct ubifs_info *c, const struct inode *inode);
+void ubifs_dump_node(const struct ubifs_info *c, const void *node);
+void ubifs_dump_budget_req(const struct ubifs_budget_req *req);
+void ubifs_dump_lstats(const struct ubifs_lp_stats *lst);
+void ubifs_dump_budg(struct ubifs_info *c, const struct ubifs_budg_info *bi);
+void ubifs_dump_lprop(const struct ubifs_info *c,
+		      const struct ubifs_lprops *lp);
+void ubifs_dump_lprops(struct ubifs_info *c);
+void ubifs_dump_lpt_info(struct ubifs_info *c);
+void ubifs_dump_leb(const struct ubifs_info *c, int lnum);
+void ubifs_dump_sleb(const struct ubifs_info *c,
+		     const struct ubifs_scan_leb *sleb, int offs);
+void ubifs_dump_znode(const struct ubifs_info *c,
+		      const struct ubifs_znode *znode);
+void ubifs_dump_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap,
+		     int cat);
+void ubifs_dump_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode,
+		      struct ubifs_nnode *parent, int iip);
+void ubifs_dump_tnc(struct ubifs_info *c);
+void ubifs_dump_index(struct ubifs_info *c);
+void ubifs_dump_lpt_lebs(const struct ubifs_info *c);
+
+int dbg_walk_index(struct ubifs_info *c, dbg_leaf_callback leaf_cb,
+		   dbg_znode_callback znode_cb, void *priv);
+
+/* Checking functions */
+void dbg_save_space_info(struct ubifs_info *c);
+int dbg_check_space_info(struct ubifs_info *c);
+int dbg_check_lprops(struct ubifs_info *c);
+int dbg_old_index_check_init(struct ubifs_info *c, struct ubifs_zbranch *zroot);
+int dbg_check_old_index(struct ubifs_info *c, struct ubifs_zbranch *zroot);
+int dbg_check_cats(struct ubifs_info *c);
+int dbg_check_ltab(struct ubifs_info *c);
+int dbg_chk_lpt_free_spc(struct ubifs_info *c);
+int dbg_chk_lpt_sz(struct ubifs_info *c, int action, int len);
+int dbg_check_synced_i_size(const struct ubifs_info *c, struct inode *inode);
+int dbg_check_dir(struct ubifs_info *c, const struct inode *dir);
+int dbg_check_tnc(struct ubifs_info *c, int extra);
+int dbg_check_idx_size(struct ubifs_info *c, long long idx_size);
+int dbg_check_filesystem(struct ubifs_info *c);
+void dbg_check_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat,
+		    int add_pos);
+int dbg_check_lpt_nodes(struct ubifs_info *c, struct ubifs_cnode *cnode,
+			int row, int col);
+int dbg_check_inode_size(struct ubifs_info *c, const struct inode *inode,
+			 loff_t size);
+int dbg_check_data_nodes_order(struct ubifs_info *c, struct list_head *head);
+int dbg_check_nondata_nodes_order(struct ubifs_info *c, struct list_head *head);
+
+int dbg_leb_write(struct ubifs_info *c, int lnum, const void *buf, int offs,
+		  int len);
+int dbg_leb_change(struct ubifs_info *c, int lnum, const void *buf, int len);
+int dbg_leb_unmap(struct ubifs_info *c, int lnum);
+int dbg_leb_map(struct ubifs_info *c, int lnum);
+
+/* Debugfs-related stuff */
+int dbg_debugfs_init(void);
+void dbg_debugfs_exit(void);
+int dbg_debugfs_init_fs(struct ubifs_info *c);
+void dbg_debugfs_exit_fs(struct ubifs_info *c);
 
 #endif /* !__UBIFS_DEBUG_H__ */
diff --git a/fs/ubifs/io.c b/fs/ubifs/io.c
index aae5c65..f87341e 100644
--- a/fs/ubifs/io.c
+++ b/fs/ubifs/io.c
@@ -4,18 +4,7 @@
  * Copyright (C) 2006-2008 Nokia Corporation.
  * Copyright (C) 2006, 2007 University of Szeged, Hungary
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Artem Bityutskiy (Битюцкий Артём)
  *          Adrian Hunter
@@ -31,6 +20,26 @@
  * buffer is full or when it is not used for some time (by timer). This is
  * similar to the mechanism is used by JFFS2.
  *
+ * UBIFS distinguishes between minimum write size (@c->min_io_size) and maximum
+ * write size (@c->max_write_size). The latter is the maximum amount of bytes
+ * the underlying flash is able to program at a time, and writing in
+ * @c->max_write_size units should presumably be faster. Obviously,
+ * @c->min_io_size <= @c->max_write_size. Write-buffers are of
+ * @c->max_write_size bytes in size for maximum performance. However, when a
+ * write-buffer is flushed, only the portion of it (aligned to @c->min_io_size
+ * boundary) which contains data is written, not the whole write-buffer,
+ * because this is more space-efficient.
+ *
+ * This optimization adds few complications to the code. Indeed, on the one
+ * hand, we want to write in optimal @c->max_write_size bytes chunks, which
+ * also means aligning writes at the @c->max_write_size bytes offsets. On the
+ * other hand, we do not want to waste space when synchronizing the write
+ * buffer, so during synchronization we writes in smaller chunks. And this makes
+ * the next write offset to be not aligned to @c->max_write_size bytes. So the
+ * have to make sure that the write-buffer offset (@wbuf->offs) becomes aligned
+ * to @c->max_write_size bytes again. We do this by temporarily shrinking
+ * write-buffer size (@wbuf->size).
+ *
  * Write-buffers are defined by 'struct ubifs_wbuf' objects and protected by
  * mutexes defined inside these objects. Since sometimes upper-level code
  * has to lock the write-buffer (e.g. journal space reservation code), many
@@ -46,10 +55,18 @@
  * UBIFS uses padding when it pads to the next min. I/O unit. In this case it
  * uses padding nodes or padding bytes, if the padding node does not fit.
  *
- * All UBIFS nodes are protected by CRC checksums and UBIFS checks all nodes
- * every time they are read from the flash media.
+ * All UBIFS nodes are protected by CRC checksums and UBIFS checks CRC when
+ * they are read from the flash media.
  */
 
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/crc32.h>
+#include <linux/slab.h>
+#else
+#include <linux/compat.h>
+#include <linux/err.h>
+#endif
 #include "ubifs.h"
 
 /**
@@ -59,12 +76,129 @@
  */
 void ubifs_ro_mode(struct ubifs_info *c, int err)
 {
-	if (!c->ro_media) {
-		c->ro_media = 1;
+	if (!c->ro_error) {
+		c->ro_error = 1;
 		c->no_chk_data_crc = 0;
+		c->vfs_sb->s_flags |= MS_RDONLY;
 		ubifs_warn("switched to read-only mode, error %d", err);
-		dbg_dump_stack();
+		dump_stack();
+	}
+}
+
+/*
+ * Below are simple wrappers over UBI I/O functions which include some
+ * additional checks and UBIFS debugging stuff. See corresponding UBI function
+ * for more information.
+ */
+
+int ubifs_leb_read(const struct ubifs_info *c, int lnum, void *buf, int offs,
+		   int len, int even_ebadmsg)
+{
+	int err;
+
+	err = ubi_read(c->ubi, lnum, buf, offs, len);
+	/*
+	 * In case of %-EBADMSG print the error message only if the
+	 * @even_ebadmsg is true.
+	 */
+	if (err && (err != -EBADMSG || even_ebadmsg)) {
+		ubifs_err("reading %d bytes from LEB %d:%d failed, error %d",
+			  len, lnum, offs, err);
+		dump_stack();
+	}
+	return err;
+}
+
+int ubifs_leb_write(struct ubifs_info *c, int lnum, const void *buf, int offs,
+		    int len)
+{
+	int err;
+
+	ubifs_assert(!c->ro_media && !c->ro_mount);
+	if (c->ro_error)
+		return -EROFS;
+	if (!dbg_is_tst_rcvry(c))
+		err = ubi_leb_write(c->ubi, lnum, buf, offs, len);
+	else
+		err = dbg_leb_write(c, lnum, buf, offs, len);
+	if (err) {
+		ubifs_err("writing %d bytes to LEB %d:%d failed, error %d",
+			  len, lnum, offs, err);
+		ubifs_ro_mode(c, err);
+		dump_stack();
+	}
+	return err;
+}
+
+int ubifs_leb_change(struct ubifs_info *c, int lnum, const void *buf, int len)
+{
+	int err;
+
+	ubifs_assert(!c->ro_media && !c->ro_mount);
+	if (c->ro_error)
+		return -EROFS;
+	if (!dbg_is_tst_rcvry(c))
+		err = ubi_leb_change(c->ubi, lnum, buf, len);
+	else
+		err = dbg_leb_change(c, lnum, buf, len);
+	if (err) {
+		ubifs_err("changing %d bytes in LEB %d failed, error %d",
+			  len, lnum, err);
+		ubifs_ro_mode(c, err);
+		dump_stack();
 	}
+	return err;
+}
+
+int ubifs_leb_unmap(struct ubifs_info *c, int lnum)
+{
+	int err;
+
+	ubifs_assert(!c->ro_media && !c->ro_mount);
+	if (c->ro_error)
+		return -EROFS;
+	if (!dbg_is_tst_rcvry(c))
+		err = ubi_leb_unmap(c->ubi, lnum);
+	else
+		err = dbg_leb_unmap(c, lnum);
+	if (err) {
+		ubifs_err("unmap LEB %d failed, error %d", lnum, err);
+		ubifs_ro_mode(c, err);
+		dump_stack();
+	}
+	return err;
+}
+
+int ubifs_leb_map(struct ubifs_info *c, int lnum)
+{
+	int err;
+
+	ubifs_assert(!c->ro_media && !c->ro_mount);
+	if (c->ro_error)
+		return -EROFS;
+	if (!dbg_is_tst_rcvry(c))
+		err = ubi_leb_map(c->ubi, lnum);
+	else
+		err = dbg_leb_map(c, lnum);
+	if (err) {
+		ubifs_err("mapping LEB %d failed, error %d", lnum, err);
+		ubifs_ro_mode(c, err);
+		dump_stack();
+	}
+	return err;
+}
+
+int ubifs_is_mapped(const struct ubifs_info *c, int lnum)
+{
+	int err;
+
+	err = ubi_is_mapped(c->ubi, lnum);
+	if (err < 0) {
+		ubifs_err("ubi_is_mapped failed for LEB %d, error %d",
+			  lnum, err);
+		dump_stack();
+	}
+	return err;
 }
 
 /**
@@ -85,8 +219,12 @@ void ubifs_ro_mode(struct ubifs_info *c, int err)
  * This function may skip data nodes CRC checking if @c->no_chk_data_crc is
  * true, which is controlled by corresponding UBIFS mount option. However, if
  * @must_chk_crc is true, then @c->no_chk_data_crc is ignored and CRC is
- * checked. Similarly, if @c->always_chk_crc is true, @c->no_chk_data_crc is
- * ignored and CRC is checked.
+ * checked. Similarly, if @c->mounting or @c->remounting_rw is true (we are
+ * mounting or re-mounting to R/W mode), @c->no_chk_data_crc is ignored and CRC
+ * is checked. This is because during mounting or re-mounting from R/O mode to
+ * R/W mode we may read journal nodes (when replying the journal or doing the
+ * recovery) and the journal nodes may potentially be corrupted, so checking is
+ * required.
  *
  * This function returns zero in case of success and %-EUCLEAN in case of bad
  * CRC or magic.
@@ -128,8 +266,8 @@ int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
 		   node_len > c->ranges[type].max_len)
 		goto out_len;
 
-	if (!must_chk_crc && type == UBIFS_DATA_NODE && !c->always_chk_crc &&
-	     c->no_chk_data_crc)
+	if (!must_chk_crc && type == UBIFS_DATA_NODE && !c->mounting &&
+	    !c->remounting_rw && c->no_chk_data_crc)
 		return 0;
 
 	crc = crc32(UBIFS_CRC32_INIT, buf + 8, node_len - 8);
@@ -150,8 +288,8 @@ out_len:
 out:
 	if (!quiet) {
 		ubifs_err("bad node at LEB %d:%d", lnum, offs);
-		dbg_dump_node(c, buf);
-		dbg_dump_stack();
+		ubifs_dump_node(c, buf);
+		dump_stack();
 	}
 	return err;
 }
@@ -257,6 +395,571 @@ void ubifs_prepare_node(struct ubifs_info *c, void *node, int len, int pad)
 }
 
 /**
+ * ubifs_prep_grp_node - prepare node of a group to be written to flash.
+ * @c: UBIFS file-system description object
+ * @node: the node to pad
+ * @len: node length
+ * @last: indicates the last node of the group
+ *
+ * This function prepares node at @node to be written to the media - it
+ * calculates node CRC and fills the common header.
+ */
+void ubifs_prep_grp_node(struct ubifs_info *c, void *node, int len, int last)
+{
+	uint32_t crc;
+	struct ubifs_ch *ch = node;
+	unsigned long long sqnum = next_sqnum(c);
+
+	ubifs_assert(len >= UBIFS_CH_SZ);
+
+	ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC);
+	ch->len = cpu_to_le32(len);
+	if (last)
+		ch->group_type = UBIFS_LAST_OF_NODE_GROUP;
+	else
+		ch->group_type = UBIFS_IN_NODE_GROUP;
+	ch->sqnum = cpu_to_le64(sqnum);
+	ch->padding[0] = ch->padding[1] = 0;
+	crc = crc32(UBIFS_CRC32_INIT, node + 8, len - 8);
+	ch->crc = cpu_to_le32(crc);
+}
+
+#ifndef __UBOOT__
+/**
+ * wbuf_timer_callback - write-buffer timer callback function.
+ * @data: timer data (write-buffer descriptor)
+ *
+ * This function is called when the write-buffer timer expires.
+ */
+static enum hrtimer_restart wbuf_timer_callback_nolock(struct hrtimer *timer)
+{
+	struct ubifs_wbuf *wbuf = container_of(timer, struct ubifs_wbuf, timer);
+
+	dbg_io("jhead %s", dbg_jhead(wbuf->jhead));
+	wbuf->need_sync = 1;
+	wbuf->c->need_wbuf_sync = 1;
+	ubifs_wake_up_bgt(wbuf->c);
+	return HRTIMER_NORESTART;
+}
+
+/**
+ * new_wbuf_timer - start new write-buffer timer.
+ * @wbuf: write-buffer descriptor
+ */
+static void new_wbuf_timer_nolock(struct ubifs_wbuf *wbuf)
+{
+	ubifs_assert(!hrtimer_active(&wbuf->timer));
+
+	if (wbuf->no_timer)
+		return;
+	dbg_io("set timer for jhead %s, %llu-%llu millisecs",
+	       dbg_jhead(wbuf->jhead),
+	       div_u64(ktime_to_ns(wbuf->softlimit), USEC_PER_SEC),
+	       div_u64(ktime_to_ns(wbuf->softlimit) + wbuf->delta,
+		       USEC_PER_SEC));
+	hrtimer_start_range_ns(&wbuf->timer, wbuf->softlimit, wbuf->delta,
+			       HRTIMER_MODE_REL);
+}
+#endif
+
+/**
+ * cancel_wbuf_timer - cancel write-buffer timer.
+ * @wbuf: write-buffer descriptor
+ */
+static void cancel_wbuf_timer_nolock(struct ubifs_wbuf *wbuf)
+{
+	if (wbuf->no_timer)
+		return;
+	wbuf->need_sync = 0;
+#ifndef __UBOOT__
+	hrtimer_cancel(&wbuf->timer);
+#endif
+}
+
+/**
+ * ubifs_wbuf_sync_nolock - synchronize write-buffer.
+ * @wbuf: write-buffer to synchronize
+ *
+ * This function synchronizes write-buffer @buf and returns zero in case of
+ * success or a negative error code in case of failure.
+ *
+ * Note, although write-buffers are of @c->max_write_size, this function does
+ * not necessarily writes all @c->max_write_size bytes to the flash. Instead,
+ * if the write-buffer is only partially filled with data, only the used part
+ * of the write-buffer (aligned on @c->min_io_size boundary) is synchronized.
+ * This way we waste less space.
+ */
+int ubifs_wbuf_sync_nolock(struct ubifs_wbuf *wbuf)
+{
+	struct ubifs_info *c = wbuf->c;
+	int err, dirt, sync_len;
+
+	cancel_wbuf_timer_nolock(wbuf);
+	if (!wbuf->used || wbuf->lnum == -1)
+		/* Write-buffer is empty or not seeked */
+		return 0;
+
+	dbg_io("LEB %d:%d, %d bytes, jhead %s",
+	       wbuf->lnum, wbuf->offs, wbuf->used, dbg_jhead(wbuf->jhead));
+	ubifs_assert(!(wbuf->avail & 7));
+	ubifs_assert(wbuf->offs + wbuf->size <= c->leb_size);
+	ubifs_assert(wbuf->size >= c->min_io_size);
+	ubifs_assert(wbuf->size <= c->max_write_size);
+	ubifs_assert(wbuf->size % c->min_io_size == 0);
+	ubifs_assert(!c->ro_media && !c->ro_mount);
+	if (c->leb_size - wbuf->offs >= c->max_write_size)
+		ubifs_assert(!((wbuf->offs + wbuf->size) % c->max_write_size));
+
+	if (c->ro_error)
+		return -EROFS;
+
+	/*
+	 * Do not write whole write buffer but write only the minimum necessary
+	 * amount of min. I/O units.
+	 */
+	sync_len = ALIGN(wbuf->used, c->min_io_size);
+	dirt = sync_len - wbuf->used;
+	if (dirt)
+		ubifs_pad(c, wbuf->buf + wbuf->used, dirt);
+	err = ubifs_leb_write(c, wbuf->lnum, wbuf->buf, wbuf->offs, sync_len);
+	if (err)
+		return err;
+
+	spin_lock(&wbuf->lock);
+	wbuf->offs += sync_len;
+	/*
+	 * Now @wbuf->offs is not necessarily aligned to @c->max_write_size.
+	 * But our goal is to optimize writes and make sure we write in
+	 * @c->max_write_size chunks and to @c->max_write_size-aligned offset.
+	 * Thus, if @wbuf->offs is not aligned to @c->max_write_size now, make
+	 * sure that @wbuf->offs + @wbuf->size is aligned to
+	 * @c->max_write_size. This way we make sure that after next
+	 * write-buffer flush we are again at the optimal offset (aligned to
+	 * @c->max_write_size).
+	 */
+	if (c->leb_size - wbuf->offs < c->max_write_size)
+		wbuf->size = c->leb_size - wbuf->offs;
+	else if (wbuf->offs & (c->max_write_size - 1))
+		wbuf->size = ALIGN(wbuf->offs, c->max_write_size) - wbuf->offs;
+	else
+		wbuf->size = c->max_write_size;
+	wbuf->avail = wbuf->size;
+	wbuf->used = 0;
+	wbuf->next_ino = 0;
+	spin_unlock(&wbuf->lock);
+
+	if (wbuf->sync_callback)
+		err = wbuf->sync_callback(c, wbuf->lnum,
+					  c->leb_size - wbuf->offs, dirt);
+	return err;
+}
+
+/**
+ * ubifs_wbuf_seek_nolock - seek write-buffer.
+ * @wbuf: write-buffer
+ * @lnum: logical eraseblock number to seek to
+ * @offs: logical eraseblock offset to seek to
+ *
+ * This function targets the write-buffer to logical eraseblock @lnum:@offs.
+ * The write-buffer has to be empty. Returns zero in case of success and a
+ * negative error code in case of failure.
+ */
+int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs)
+{
+	const struct ubifs_info *c = wbuf->c;
+
+	dbg_io("LEB %d:%d, jhead %s", lnum, offs, dbg_jhead(wbuf->jhead));
+	ubifs_assert(lnum >= 0 && lnum < c->leb_cnt);
+	ubifs_assert(offs >= 0 && offs <= c->leb_size);
+	ubifs_assert(offs % c->min_io_size == 0 && !(offs & 7));
+	ubifs_assert(lnum != wbuf->lnum);
+	ubifs_assert(wbuf->used == 0);
+
+	spin_lock(&wbuf->lock);
+	wbuf->lnum = lnum;
+	wbuf->offs = offs;
+	if (c->leb_size - wbuf->offs < c->max_write_size)
+		wbuf->size = c->leb_size - wbuf->offs;
+	else if (wbuf->offs & (c->max_write_size - 1))
+		wbuf->size = ALIGN(wbuf->offs, c->max_write_size) - wbuf->offs;
+	else
+		wbuf->size = c->max_write_size;
+	wbuf->avail = wbuf->size;
+	wbuf->used = 0;
+	spin_unlock(&wbuf->lock);
+
+	return 0;
+}
+
+#ifndef __UBOOT__
+/**
+ * ubifs_bg_wbufs_sync - synchronize write-buffers.
+ * @c: UBIFS file-system description object
+ *
+ * This function is called by background thread to synchronize write-buffers.
+ * Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+int ubifs_bg_wbufs_sync(struct ubifs_info *c)
+{
+	int err, i;
+
+	ubifs_assert(!c->ro_media && !c->ro_mount);
+	if (!c->need_wbuf_sync)
+		return 0;
+	c->need_wbuf_sync = 0;
+
+	if (c->ro_error) {
+		err = -EROFS;
+		goto out_timers;
+	}
+
+	dbg_io("synchronize");
+	for (i = 0; i < c->jhead_cnt; i++) {
+		struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf;
+
+		cond_resched();
+
+		/*
+		 * If the mutex is locked then wbuf is being changed, so
+		 * synchronization is not necessary.
+		 */
+		if (mutex_is_locked(&wbuf->io_mutex))
+			continue;
+
+		mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
+		if (!wbuf->need_sync) {
+			mutex_unlock(&wbuf->io_mutex);
+			continue;
+		}
+
+		err = ubifs_wbuf_sync_nolock(wbuf);
+		mutex_unlock(&wbuf->io_mutex);
+		if (err) {
+			ubifs_err("cannot sync write-buffer, error %d", err);
+			ubifs_ro_mode(c, err);
+			goto out_timers;
+		}
+	}
+
+	return 0;
+
+out_timers:
+	/* Cancel all timers to prevent repeated errors */
+	for (i = 0; i < c->jhead_cnt; i++) {
+		struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf;
+
+		mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
+		cancel_wbuf_timer_nolock(wbuf);
+		mutex_unlock(&wbuf->io_mutex);
+	}
+	return err;
+}
+
+/**
+ * ubifs_wbuf_write_nolock - write data to flash via write-buffer.
+ * @wbuf: write-buffer
+ * @buf: node to write
+ * @len: node length
+ *
+ * This function writes data to flash via write-buffer @wbuf. This means that
+ * the last piece of the node won't reach the flash media immediately if it
+ * does not take whole max. write unit (@c->max_write_size). Instead, the node
+ * will sit in RAM until the write-buffer is synchronized (e.g., by timer, or
+ * because more data are appended to the write-buffer).
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure. If the node cannot be written because there is no more
+ * space in this logical eraseblock, %-ENOSPC is returned.
+ */
+int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len)
+{
+	struct ubifs_info *c = wbuf->c;
+	int err, written, n, aligned_len = ALIGN(len, 8);
+
+	dbg_io("%d bytes (%s) to jhead %s wbuf at LEB %d:%d", len,
+	       dbg_ntype(((struct ubifs_ch *)buf)->node_type),
+	       dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs + wbuf->used);
+	ubifs_assert(len > 0 && wbuf->lnum >= 0 && wbuf->lnum < c->leb_cnt);
+	ubifs_assert(wbuf->offs >= 0 && wbuf->offs % c->min_io_size == 0);
+	ubifs_assert(!(wbuf->offs & 7) && wbuf->offs <= c->leb_size);
+	ubifs_assert(wbuf->avail > 0 && wbuf->avail <= wbuf->size);
+	ubifs_assert(wbuf->size >= c->min_io_size);
+	ubifs_assert(wbuf->size <= c->max_write_size);
+	ubifs_assert(wbuf->size % c->min_io_size == 0);
+	ubifs_assert(mutex_is_locked(&wbuf->io_mutex));
+	ubifs_assert(!c->ro_media && !c->ro_mount);
+	ubifs_assert(!c->space_fixup);
+	if (c->leb_size - wbuf->offs >= c->max_write_size)
+		ubifs_assert(!((wbuf->offs + wbuf->size) % c->max_write_size));
+
+	if (c->leb_size - wbuf->offs - wbuf->used < aligned_len) {
+		err = -ENOSPC;
+		goto out;
+	}
+
+	cancel_wbuf_timer_nolock(wbuf);
+
+	if (c->ro_error)
+		return -EROFS;
+
+	if (aligned_len <= wbuf->avail) {
+		/*
+		 * The node is not very large and fits entirely within
+		 * write-buffer.
+		 */
+		memcpy(wbuf->buf + wbuf->used, buf, len);
+
+		if (aligned_len == wbuf->avail) {
+			dbg_io("flush jhead %s wbuf to LEB %d:%d",
+			       dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs);
+			err = ubifs_leb_write(c, wbuf->lnum, wbuf->buf,
+					      wbuf->offs, wbuf->size);
+			if (err)
+				goto out;
+
+			spin_lock(&wbuf->lock);
+			wbuf->offs += wbuf->size;
+			if (c->leb_size - wbuf->offs >= c->max_write_size)
+				wbuf->size = c->max_write_size;
+			else
+				wbuf->size = c->leb_size - wbuf->offs;
+			wbuf->avail = wbuf->size;
+			wbuf->used = 0;
+			wbuf->next_ino = 0;
+			spin_unlock(&wbuf->lock);
+		} else {
+			spin_lock(&wbuf->lock);
+			wbuf->avail -= aligned_len;
+			wbuf->used += aligned_len;
+			spin_unlock(&wbuf->lock);
+		}
+
+		goto exit;
+	}
+
+	written = 0;
+
+	if (wbuf->used) {
+		/*
+		 * The node is large enough and does not fit entirely within
+		 * current available space. We have to fill and flush
+		 * write-buffer and switch to the next max. write unit.
+		 */
+		dbg_io("flush jhead %s wbuf to LEB %d:%d",
+		       dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs);
+		memcpy(wbuf->buf + wbuf->used, buf, wbuf->avail);
+		err = ubifs_leb_write(c, wbuf->lnum, wbuf->buf, wbuf->offs,
+				      wbuf->size);
+		if (err)
+			goto out;
+
+		wbuf->offs += wbuf->size;
+		len -= wbuf->avail;
+		aligned_len -= wbuf->avail;
+		written += wbuf->avail;
+	} else if (wbuf->offs & (c->max_write_size - 1)) {
+		/*
+		 * The write-buffer offset is not aligned to
+		 * @c->max_write_size and @wbuf->size is less than
+		 * @c->max_write_size. Write @wbuf->size bytes to make sure the
+		 * following writes are done in optimal @c->max_write_size
+		 * chunks.
+		 */
+		dbg_io("write %d bytes to LEB %d:%d",
+		       wbuf->size, wbuf->lnum, wbuf->offs);
+		err = ubifs_leb_write(c, wbuf->lnum, buf, wbuf->offs,
+				      wbuf->size);
+		if (err)
+			goto out;
+
+		wbuf->offs += wbuf->size;
+		len -= wbuf->size;
+		aligned_len -= wbuf->size;
+		written += wbuf->size;
+	}
+
+	/*
+	 * The remaining data may take more whole max. write units, so write the
+	 * remains multiple to max. write unit size directly to the flash media.
+	 * We align node length to 8-byte boundary because we anyway flash wbuf
+	 * if the remaining space is less than 8 bytes.
+	 */
+	n = aligned_len >> c->max_write_shift;
+	if (n) {
+		n <<= c->max_write_shift;
+		dbg_io("write %d bytes to LEB %d:%d", n, wbuf->lnum,
+		       wbuf->offs);
+		err = ubifs_leb_write(c, wbuf->lnum, buf + written,
+				      wbuf->offs, n);
+		if (err)
+			goto out;
+		wbuf->offs += n;
+		aligned_len -= n;
+		len -= n;
+		written += n;
+	}
+
+	spin_lock(&wbuf->lock);
+	if (aligned_len)
+		/*
+		 * And now we have what's left and what does not take whole
+		 * max. write unit, so write it to the write-buffer and we are
+		 * done.
+		 */
+		memcpy(wbuf->buf, buf + written, len);
+
+	if (c->leb_size - wbuf->offs >= c->max_write_size)
+		wbuf->size = c->max_write_size;
+	else
+		wbuf->size = c->leb_size - wbuf->offs;
+	wbuf->avail = wbuf->size - aligned_len;
+	wbuf->used = aligned_len;
+	wbuf->next_ino = 0;
+	spin_unlock(&wbuf->lock);
+
+exit:
+	if (wbuf->sync_callback) {
+		int free = c->leb_size - wbuf->offs - wbuf->used;
+
+		err = wbuf->sync_callback(c, wbuf->lnum, free, 0);
+		if (err)
+			goto out;
+	}
+
+	if (wbuf->used)
+		new_wbuf_timer_nolock(wbuf);
+
+	return 0;
+
+out:
+	ubifs_err("cannot write %d bytes to LEB %d:%d, error %d",
+		  len, wbuf->lnum, wbuf->offs, err);
+	ubifs_dump_node(c, buf);
+	dump_stack();
+	ubifs_dump_leb(c, wbuf->lnum);
+	return err;
+}
+
+/**
+ * ubifs_write_node - write node to the media.
+ * @c: UBIFS file-system description object
+ * @buf: the node to write
+ * @len: node length
+ * @lnum: logical eraseblock number
+ * @offs: offset within the logical eraseblock
+ *
+ * This function automatically fills node magic number, assigns sequence
+ * number, and calculates node CRC checksum. The length of the @buf buffer has
+ * to be aligned to the minimal I/O unit size. This function automatically
+ * appends padding node and padding bytes if needed. Returns zero in case of
+ * success and a negative error code in case of failure.
+ */
+int ubifs_write_node(struct ubifs_info *c, void *buf, int len, int lnum,
+		     int offs)
+{
+	int err, buf_len = ALIGN(len, c->min_io_size);
+
+	dbg_io("LEB %d:%d, %s, length %d (aligned %d)",
+	       lnum, offs, dbg_ntype(((struct ubifs_ch *)buf)->node_type), len,
+	       buf_len);
+	ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
+	ubifs_assert(offs % c->min_io_size == 0 && offs < c->leb_size);
+	ubifs_assert(!c->ro_media && !c->ro_mount);
+	ubifs_assert(!c->space_fixup);
+
+	if (c->ro_error)
+		return -EROFS;
+
+	ubifs_prepare_node(c, buf, len, 1);
+	err = ubifs_leb_write(c, lnum, buf, offs, buf_len);
+	if (err)
+		ubifs_dump_node(c, buf);
+
+	return err;
+}
+#endif
+
+/**
+ * ubifs_read_node_wbuf - read node from the media or write-buffer.
+ * @wbuf: wbuf to check for un-written data
+ * @buf: buffer to read to
+ * @type: node type
+ * @len: node length
+ * @lnum: logical eraseblock number
+ * @offs: offset within the logical eraseblock
+ *
+ * This function reads a node of known type and length, checks it and stores
+ * in @buf. If the node partially or fully sits in the write-buffer, this
+ * function takes data from the buffer, otherwise it reads the flash media.
+ * Returns zero in case of success, %-EUCLEAN if CRC mismatched and a negative
+ * error code in case of failure.
+ */
+int ubifs_read_node_wbuf(struct ubifs_wbuf *wbuf, void *buf, int type, int len,
+			 int lnum, int offs)
+{
+	const struct ubifs_info *c = wbuf->c;
+	int err, rlen, overlap;
+	struct ubifs_ch *ch = buf;
+
+	dbg_io("LEB %d:%d, %s, length %d, jhead %s", lnum, offs,
+	       dbg_ntype(type), len, dbg_jhead(wbuf->jhead));
+	ubifs_assert(wbuf && lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
+	ubifs_assert(!(offs & 7) && offs < c->leb_size);
+	ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT);
+
+	spin_lock(&wbuf->lock);
+	overlap = (lnum == wbuf->lnum && offs + len > wbuf->offs);
+	if (!overlap) {
+		/* We may safely unlock the write-buffer and read the data */
+		spin_unlock(&wbuf->lock);
+		return ubifs_read_node(c, buf, type, len, lnum, offs);
+	}
+
+	/* Don't read under wbuf */
+	rlen = wbuf->offs - offs;
+	if (rlen < 0)
+		rlen = 0;
+
+	/* Copy the rest from the write-buffer */
+	memcpy(buf + rlen, wbuf->buf + offs + rlen - wbuf->offs, len - rlen);
+	spin_unlock(&wbuf->lock);
+
+	if (rlen > 0) {
+		/* Read everything that goes before write-buffer */
+		err = ubifs_leb_read(c, lnum, buf, offs, rlen, 0);
+		if (err && err != -EBADMSG)
+			return err;
+	}
+
+	if (type != ch->node_type) {
+		ubifs_err("bad node type (%d but expected %d)",
+			  ch->node_type, type);
+		goto out;
+	}
+
+	err = ubifs_check_node(c, buf, lnum, offs, 0, 0);
+	if (err) {
+		ubifs_err("expected node type %d", type);
+		return err;
+	}
+
+	rlen = le32_to_cpu(ch->len);
+	if (rlen != len) {
+		ubifs_err("bad node length %d, expected %d", rlen, len);
+		goto out;
+	}
+
+	return 0;
+
+out:
+	ubifs_err("bad node at LEB %d:%d", lnum, offs);
+	ubifs_dump_node(c, buf);
+	dump_stack();
+	return -EINVAL;
+}
+
+/**
  * ubifs_read_node - read node.
  * @c: UBIFS file-system description object
  * @buf: buffer to read to
@@ -281,12 +984,9 @@ int ubifs_read_node(const struct ubifs_info *c, void *buf, int type, int len,
 	ubifs_assert(!(offs & 7) && offs < c->leb_size);
 	ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT);
 
-	err = ubi_read(c->ubi, lnum, buf, offs, len);
-	if (err && err != -EBADMSG) {
-		ubifs_err("cannot read node %d from LEB %d:%d, error %d",
-			  type, lnum, offs, err);
+	err = ubifs_leb_read(c, lnum, buf, offs, len, 0);
+	if (err && err != -EBADMSG)
 		return err;
-	}
 
 	if (type != ch->node_type) {
 		ubifs_err("bad node type (%d but expected %d)",
@@ -309,8 +1009,143 @@ int ubifs_read_node(const struct ubifs_info *c, void *buf, int type, int len,
 	return 0;
 
 out:
-	ubifs_err("bad node at LEB %d:%d", lnum, offs);
-	dbg_dump_node(c, buf);
-	dbg_dump_stack();
+	ubifs_err("bad node at LEB %d:%d, LEB mapping status %d", lnum, offs,
+		  ubi_is_mapped(c->ubi, lnum));
+	ubifs_dump_node(c, buf);
+	dump_stack();
 	return -EINVAL;
 }
+
+/**
+ * ubifs_wbuf_init - initialize write-buffer.
+ * @c: UBIFS file-system description object
+ * @wbuf: write-buffer to initialize
+ *
+ * This function initializes write-buffer. Returns zero in case of success
+ * %-ENOMEM in case of failure.
+ */
+int ubifs_wbuf_init(struct ubifs_info *c, struct ubifs_wbuf *wbuf)
+{
+	size_t size;
+
+	wbuf->buf = kmalloc(c->max_write_size, GFP_KERNEL);
+	if (!wbuf->buf)
+		return -ENOMEM;
+
+	size = (c->max_write_size / UBIFS_CH_SZ + 1) * sizeof(ino_t);
+	wbuf->inodes = kmalloc(size, GFP_KERNEL);
+	if (!wbuf->inodes) {
+		kfree(wbuf->buf);
+		wbuf->buf = NULL;
+		return -ENOMEM;
+	}
+
+	wbuf->used = 0;
+	wbuf->lnum = wbuf->offs = -1;
+	/*
+	 * If the LEB starts at the max. write size aligned address, then
+	 * write-buffer size has to be set to @c->max_write_size. Otherwise,
+	 * set it to something smaller so that it ends at the closest max.
+	 * write size boundary.
+	 */
+	size = c->max_write_size - (c->leb_start % c->max_write_size);
+	wbuf->avail = wbuf->size = size;
+	wbuf->sync_callback = NULL;
+	mutex_init(&wbuf->io_mutex);
+	spin_lock_init(&wbuf->lock);
+	wbuf->c = c;
+	wbuf->next_ino = 0;
+
+#ifndef __UBOOT__
+	hrtimer_init(&wbuf->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	wbuf->timer.function = wbuf_timer_callback_nolock;
+	wbuf->softlimit = ktime_set(WBUF_TIMEOUT_SOFTLIMIT, 0);
+	wbuf->delta = WBUF_TIMEOUT_HARDLIMIT - WBUF_TIMEOUT_SOFTLIMIT;
+	wbuf->delta *= 1000000000ULL;
+	ubifs_assert(wbuf->delta <= ULONG_MAX);
+#endif
+	return 0;
+}
+
+/**
+ * ubifs_wbuf_add_ino_nolock - add an inode number into the wbuf inode array.
+ * @wbuf: the write-buffer where to add
+ * @inum: the inode number
+ *
+ * This function adds an inode number to the inode array of the write-buffer.
+ */
+void ubifs_wbuf_add_ino_nolock(struct ubifs_wbuf *wbuf, ino_t inum)
+{
+	if (!wbuf->buf)
+		/* NOR flash or something similar */
+		return;
+
+	spin_lock(&wbuf->lock);
+	if (wbuf->used)
+		wbuf->inodes[wbuf->next_ino++] = inum;
+	spin_unlock(&wbuf->lock);
+}
+
+/**
+ * wbuf_has_ino - returns if the wbuf contains data from the inode.
+ * @wbuf: the write-buffer
+ * @inum: the inode number
+ *
+ * This function returns with %1 if the write-buffer contains some data from the
+ * given inode otherwise it returns with %0.
+ */
+static int wbuf_has_ino(struct ubifs_wbuf *wbuf, ino_t inum)
+{
+	int i, ret = 0;
+
+	spin_lock(&wbuf->lock);
+	for (i = 0; i < wbuf->next_ino; i++)
+		if (inum == wbuf->inodes[i]) {
+			ret = 1;
+			break;
+		}
+	spin_unlock(&wbuf->lock);
+
+	return ret;
+}
+
+/**
+ * ubifs_sync_wbufs_by_inode - synchronize write-buffers for an inode.
+ * @c: UBIFS file-system description object
+ * @inode: inode to synchronize
+ *
+ * This function synchronizes write-buffers which contain nodes belonging to
+ * @inode. Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+int ubifs_sync_wbufs_by_inode(struct ubifs_info *c, struct inode *inode)
+{
+	int i, err = 0;
+
+	for (i = 0; i < c->jhead_cnt; i++) {
+		struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf;
+
+		if (i == GCHD)
+			/*
+			 * GC head is special, do not look at it. Even if the
+			 * head contains something related to this inode, it is
+			 * a _copy_ of corresponding on-flash node which sits
+			 * somewhere else.
+			 */
+			continue;
+
+		if (!wbuf_has_ino(wbuf, inode->i_ino))
+			continue;
+
+		mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
+		if (wbuf_has_ino(wbuf, inode->i_ino))
+			err = ubifs_wbuf_sync_nolock(wbuf);
+		mutex_unlock(&wbuf->io_mutex);
+
+		if (err) {
+			ubifs_ro_mode(c, err);
+			return err;
+		}
+	}
+	return 0;
+}
diff --git a/fs/ubifs/key.h b/fs/ubifs/key.h
index efb3430..b5c4884 100644
--- a/fs/ubifs/key.h
+++ b/fs/ubifs/key.h
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Artem Bityutskiy (Битюцкий Артём)
  *          Adrian Hunter
@@ -229,23 +218,6 @@ static inline void xent_key_init(const struct ubifs_info *c,
 }
 
 /**
- * xent_key_init_hash - initialize extended attribute entry key without
- *                      re-calculating hash function.
- * @c: UBIFS file-system description object
- * @key: key to initialize
- * @inum: host inode number
- * @hash: extended attribute entry name hash
- */
-static inline void xent_key_init_hash(const struct ubifs_info *c,
-				      union ubifs_key *key, ino_t inum,
-				      uint32_t hash)
-{
-	ubifs_assert(!(hash & ~UBIFS_S_KEY_HASH_MASK));
-	key->u32[0] = inum;
-	key->u32[1] = hash | (UBIFS_XENT_KEY << UBIFS_S_KEY_HASH_BITS);
-}
-
-/**
  * xent_key_init_flash - initialize on-flash extended attribute entry key.
  * @c: UBIFS file-system description object
  * @k: key to initialize
@@ -295,22 +267,15 @@ static inline void data_key_init(const struct ubifs_info *c,
 }
 
 /**
- * data_key_init_flash - initialize on-flash data key.
+ * highest_data_key - get the highest possible data key for an inode.
  * @c: UBIFS file-system description object
- * @k: key to initialize
+ * @key: key to initialize
  * @inum: inode number
- * @block: block number
  */
-static inline void data_key_init_flash(const struct ubifs_info *c, void *k,
-				       ino_t inum, unsigned int block)
+static inline void highest_data_key(const struct ubifs_info *c,
+				   union ubifs_key *key, ino_t inum)
 {
-	union ubifs_key *key = k;
-
-	ubifs_assert(!(block & ~UBIFS_S_KEY_BLOCK_MASK));
-	key->j32[0] = cpu_to_le32(inum);
-	key->j32[1] = cpu_to_le32(block |
-				  (UBIFS_DATA_KEY << UBIFS_S_KEY_BLOCK_BITS));
-	memset(k + 8, 0, UBIFS_MAX_KEY_LEN - 8);
+	data_key_init(c, key, inum, UBIFS_S_KEY_BLOCK_MASK);
 }
 
 /**
@@ -330,6 +295,20 @@ static inline void trun_key_init(const struct ubifs_info *c,
 }
 
 /**
+ * invalid_key_init - initialize invalid node key.
+ * @c: UBIFS file-system description object
+ * @key: key to initialize
+ *
+ * This is a helper function which marks a @key object as invalid.
+ */
+static inline void invalid_key_init(const struct ubifs_info *c,
+				    union ubifs_key *key)
+{
+	key->u32[0] = 0xDEADBEAF;
+	key->u32[1] = UBIFS_INVALID_KEY;
+}
+
+/**
  * key_type - get key type.
  * @c: UBIFS file-system description object
  * @key: key to get type of
@@ -381,8 +360,8 @@ static inline ino_t key_inum_flash(const struct ubifs_info *c, const void *k)
  * @c: UBIFS file-system description object
  * @key: the key to get hash from
  */
-static inline int key_hash(const struct ubifs_info *c,
-			   const union ubifs_key *key)
+static inline uint32_t key_hash(const struct ubifs_info *c,
+				const union ubifs_key *key)
 {
 	return key->u32[1] & UBIFS_S_KEY_HASH_MASK;
 }
@@ -392,7 +371,7 @@ static inline int key_hash(const struct ubifs_info *c,
  * @c: UBIFS file-system description object
  * @k: the key to get hash from
  */
-static inline int key_hash_flash(const struct ubifs_info *c, const void *k)
+static inline uint32_t key_hash_flash(const struct ubifs_info *c, const void *k)
 {
 	const union ubifs_key *key = k;
 
@@ -554,4 +533,5 @@ static inline unsigned long long key_max_inode_size(const struct ubifs_info *c)
 		return 0;
 	}
 }
+
 #endif /* !__UBIFS_KEY_H__ */
diff --git a/fs/ubifs/log.c b/fs/ubifs/log.c
index 68a9bd9..ced0424 100644
--- a/fs/ubifs/log.c
+++ b/fs/ubifs/log.c
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Artem Bityutskiy (Битюцкий Артём)
  *          Adrian Hunter
@@ -27,8 +16,14 @@
  * journal.
  */
 
+#define __UBOOT__
+#ifdef __UBOOT__
+#include <linux/err.h>
+#endif
 #include "ubifs.h"
 
+static int dbg_check_bud_bytes(struct ubifs_info *c);
+
 /**
  * ubifs_search_bud - search bud LEB.
  * @c: UBIFS file-system description object
@@ -60,6 +55,57 @@ struct ubifs_bud *ubifs_search_bud(struct ubifs_info *c, int lnum)
 }
 
 /**
+ * ubifs_get_wbuf - get the wbuf associated with a LEB, if there is one.
+ * @c: UBIFS file-system description object
+ * @lnum: logical eraseblock number to search
+ *
+ * This functions returns the wbuf for @lnum or %NULL if there is not one.
+ */
+struct ubifs_wbuf *ubifs_get_wbuf(struct ubifs_info *c, int lnum)
+{
+	struct rb_node *p;
+	struct ubifs_bud *bud;
+	int jhead;
+
+	if (!c->jheads)
+		return NULL;
+
+	spin_lock(&c->buds_lock);
+	p = c->buds.rb_node;
+	while (p) {
+		bud = rb_entry(p, struct ubifs_bud, rb);
+		if (lnum < bud->lnum)
+			p = p->rb_left;
+		else if (lnum > bud->lnum)
+			p = p->rb_right;
+		else {
+			jhead = bud->jhead;
+			spin_unlock(&c->buds_lock);
+			return &c->jheads[jhead].wbuf;
+		}
+	}
+	spin_unlock(&c->buds_lock);
+	return NULL;
+}
+
+/**
+ * empty_log_bytes - calculate amount of empty space in the log.
+ * @c: UBIFS file-system description object
+ */
+static inline long long empty_log_bytes(const struct ubifs_info *c)
+{
+	long long h, t;
+
+	h = (long long)c->lhead_lnum * c->leb_size + c->lhead_offs;
+	t = (long long)c->ltail_lnum * c->leb_size;
+
+	if (h >= t)
+		return c->log_bytes - h + t;
+	else
+		return t - h;
+}
+
+/**
  * ubifs_add_bud - add bud LEB to the tree of buds and its journal head list.
  * @c: UBIFS file-system description object
  * @bud: the bud to add
@@ -88,7 +134,7 @@ void ubifs_add_bud(struct ubifs_info *c, struct ubifs_bud *bud)
 		jhead = &c->jheads[bud->jhead];
 		list_add_tail(&bud->list, &jhead->buds_list);
 	} else
-		ubifs_assert(c->replaying && (c->vfs_sb->s_flags & MS_RDONLY));
+		ubifs_assert(c->replaying && c->ro_mount);
 
 	/*
 	 * Note, although this is a new bud, we anyway account this space now,
@@ -98,7 +144,594 @@ void ubifs_add_bud(struct ubifs_info *c, struct ubifs_bud *bud)
 	 */
 	c->bud_bytes += c->leb_size - bud->start;
 
-	dbg_log("LEB %d:%d, jhead %d, bud_bytes %lld", bud->lnum,
-		bud->start, bud->jhead, c->bud_bytes);
+	dbg_log("LEB %d:%d, jhead %s, bud_bytes %lld", bud->lnum,
+		bud->start, dbg_jhead(bud->jhead), c->bud_bytes);
+	spin_unlock(&c->buds_lock);
+}
+
+/**
+ * ubifs_add_bud_to_log - add a new bud to the log.
+ * @c: UBIFS file-system description object
+ * @jhead: journal head the bud belongs to
+ * @lnum: LEB number of the bud
+ * @offs: starting offset of the bud
+ *
+ * This function writes reference node for the new bud LEB @lnum it to the log,
+ * and adds it to the buds tress. It also makes sure that log size does not
+ * exceed the 'c->max_bud_bytes' limit. Returns zero in case of success,
+ * %-EAGAIN if commit is required, and a negative error codes in case of
+ * failure.
+ */
+int ubifs_add_bud_to_log(struct ubifs_info *c, int jhead, int lnum, int offs)
+{
+	int err;
+	struct ubifs_bud *bud;
+	struct ubifs_ref_node *ref;
+
+	bud = kmalloc(sizeof(struct ubifs_bud), GFP_NOFS);
+	if (!bud)
+		return -ENOMEM;
+	ref = kzalloc(c->ref_node_alsz, GFP_NOFS);
+	if (!ref) {
+		kfree(bud);
+		return -ENOMEM;
+	}
+
+	mutex_lock(&c->log_mutex);
+	ubifs_assert(!c->ro_media && !c->ro_mount);
+	if (c->ro_error) {
+		err = -EROFS;
+		goto out_unlock;
+	}
+
+	/* Make sure we have enough space in the log */
+	if (empty_log_bytes(c) - c->ref_node_alsz < c->min_log_bytes) {
+		dbg_log("not enough log space - %lld, required %d",
+			empty_log_bytes(c), c->min_log_bytes);
+		ubifs_commit_required(c);
+		err = -EAGAIN;
+		goto out_unlock;
+	}
+
+	/*
+	 * Make sure the amount of space in buds will not exceed the
+	 * 'c->max_bud_bytes' limit, because we want to guarantee mount time
+	 * limits.
+	 *
+	 * It is not necessary to hold @c->buds_lock when reading @c->bud_bytes
+	 * because we are holding @c->log_mutex. All @c->bud_bytes take place
+	 * when both @c->log_mutex and @c->bud_bytes are locked.
+	 */
+	if (c->bud_bytes + c->leb_size - offs > c->max_bud_bytes) {
+		dbg_log("bud bytes %lld (%lld max), require commit",
+			c->bud_bytes, c->max_bud_bytes);
+		ubifs_commit_required(c);
+		err = -EAGAIN;
+		goto out_unlock;
+	}
+
+	/*
+	 * If the journal is full enough - start background commit. Note, it is
+	 * OK to read 'c->cmt_state' without spinlock because integer reads
+	 * are atomic in the kernel.
+	 */
+	if (c->bud_bytes >= c->bg_bud_bytes &&
+	    c->cmt_state == COMMIT_RESTING) {
+		dbg_log("bud bytes %lld (%lld max), initiate BG commit",
+			c->bud_bytes, c->max_bud_bytes);
+		ubifs_request_bg_commit(c);
+	}
+
+	bud->lnum = lnum;
+	bud->start = offs;
+	bud->jhead = jhead;
+
+	ref->ch.node_type = UBIFS_REF_NODE;
+	ref->lnum = cpu_to_le32(bud->lnum);
+	ref->offs = cpu_to_le32(bud->start);
+	ref->jhead = cpu_to_le32(jhead);
+
+	if (c->lhead_offs > c->leb_size - c->ref_node_alsz) {
+		c->lhead_lnum = ubifs_next_log_lnum(c, c->lhead_lnum);
+		c->lhead_offs = 0;
+	}
+
+	if (c->lhead_offs == 0) {
+		/* Must ensure next log LEB has been unmapped */
+		err = ubifs_leb_unmap(c, c->lhead_lnum);
+		if (err)
+			goto out_unlock;
+	}
+
+	if (bud->start == 0) {
+		/*
+		 * Before writing the LEB reference which refers an empty LEB
+		 * to the log, we have to make sure it is mapped, because
+		 * otherwise we'd risk to refer an LEB with garbage in case of
+		 * an unclean reboot, because the target LEB might have been
+		 * unmapped, but not yet physically erased.
+		 */
+		err = ubifs_leb_map(c, bud->lnum);
+		if (err)
+			goto out_unlock;
+	}
+
+	dbg_log("write ref LEB %d:%d",
+		c->lhead_lnum, c->lhead_offs);
+	err = ubifs_write_node(c, ref, UBIFS_REF_NODE_SZ, c->lhead_lnum,
+			       c->lhead_offs);
+	if (err)
+		goto out_unlock;
+
+	c->lhead_offs += c->ref_node_alsz;
+
+	ubifs_add_bud(c, bud);
+
+	mutex_unlock(&c->log_mutex);
+	kfree(ref);
+	return 0;
+
+out_unlock:
+	mutex_unlock(&c->log_mutex);
+	kfree(ref);
+	kfree(bud);
+	return err;
+}
+
+/**
+ * remove_buds - remove used buds.
+ * @c: UBIFS file-system description object
+ *
+ * This function removes use buds from the buds tree. It does not remove the
+ * buds which are pointed to by journal heads.
+ */
+static void remove_buds(struct ubifs_info *c)
+{
+	struct rb_node *p;
+
+	ubifs_assert(list_empty(&c->old_buds));
+	c->cmt_bud_bytes = 0;
+	spin_lock(&c->buds_lock);
+	p = rb_first(&c->buds);
+	while (p) {
+		struct rb_node *p1 = p;
+		struct ubifs_bud *bud;
+		struct ubifs_wbuf *wbuf;
+
+		p = rb_next(p);
+		bud = rb_entry(p1, struct ubifs_bud, rb);
+		wbuf = &c->jheads[bud->jhead].wbuf;
+
+		if (wbuf->lnum == bud->lnum) {
+			/*
+			 * Do not remove buds which are pointed to by journal
+			 * heads (non-closed buds).
+			 */
+			c->cmt_bud_bytes += wbuf->offs - bud->start;
+			dbg_log("preserve %d:%d, jhead %s, bud bytes %d, cmt_bud_bytes %lld",
+				bud->lnum, bud->start, dbg_jhead(bud->jhead),
+				wbuf->offs - bud->start, c->cmt_bud_bytes);
+			bud->start = wbuf->offs;
+		} else {
+			c->cmt_bud_bytes += c->leb_size - bud->start;
+			dbg_log("remove %d:%d, jhead %s, bud bytes %d, cmt_bud_bytes %lld",
+				bud->lnum, bud->start, dbg_jhead(bud->jhead),
+				c->leb_size - bud->start, c->cmt_bud_bytes);
+			rb_erase(p1, &c->buds);
+			/*
+			 * If the commit does not finish, the recovery will need
+			 * to replay the journal, in which case the old buds
+			 * must be unchanged. Do not release them until post
+			 * commit i.e. do not allow them to be garbage
+			 * collected.
+			 */
+			list_move(&bud->list, &c->old_buds);
+		}
+	}
+	spin_unlock(&c->buds_lock);
+}
+
+/**
+ * ubifs_log_start_commit - start commit.
+ * @c: UBIFS file-system description object
+ * @ltail_lnum: return new log tail LEB number
+ *
+ * The commit operation starts with writing "commit start" node to the log and
+ * reference nodes for all journal heads which will define new journal after
+ * the commit has been finished. The commit start and reference nodes are
+ * written in one go to the nearest empty log LEB (hence, when commit is
+ * finished UBIFS may safely unmap all the previous log LEBs). This function
+ * returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+int ubifs_log_start_commit(struct ubifs_info *c, int *ltail_lnum)
+{
+	void *buf;
+	struct ubifs_cs_node *cs;
+	struct ubifs_ref_node *ref;
+	int err, i, max_len, len;
+
+	err = dbg_check_bud_bytes(c);
+	if (err)
+		return err;
+
+	max_len = UBIFS_CS_NODE_SZ + c->jhead_cnt * UBIFS_REF_NODE_SZ;
+	max_len = ALIGN(max_len, c->min_io_size);
+	buf = cs = kmalloc(max_len, GFP_NOFS);
+	if (!buf)
+		return -ENOMEM;
+
+	cs->ch.node_type = UBIFS_CS_NODE;
+	cs->cmt_no = cpu_to_le64(c->cmt_no);
+	ubifs_prepare_node(c, cs, UBIFS_CS_NODE_SZ, 0);
+
+	/*
+	 * Note, we do not lock 'c->log_mutex' because this is the commit start
+	 * phase and we are exclusively using the log. And we do not lock
+	 * write-buffer because nobody can write to the file-system at this
+	 * phase.
+	 */
+
+	len = UBIFS_CS_NODE_SZ;
+	for (i = 0; i < c->jhead_cnt; i++) {
+		int lnum = c->jheads[i].wbuf.lnum;
+		int offs = c->jheads[i].wbuf.offs;
+
+		if (lnum == -1 || offs == c->leb_size)
+			continue;
+
+		dbg_log("add ref to LEB %d:%d for jhead %s",
+			lnum, offs, dbg_jhead(i));
+		ref = buf + len;
+		ref->ch.node_type = UBIFS_REF_NODE;
+		ref->lnum = cpu_to_le32(lnum);
+		ref->offs = cpu_to_le32(offs);
+		ref->jhead = cpu_to_le32(i);
+
+		ubifs_prepare_node(c, ref, UBIFS_REF_NODE_SZ, 0);
+		len += UBIFS_REF_NODE_SZ;
+	}
+
+	ubifs_pad(c, buf + len, ALIGN(len, c->min_io_size) - len);
+
+	/* Switch to the next log LEB */
+	if (c->lhead_offs) {
+		c->lhead_lnum = ubifs_next_log_lnum(c, c->lhead_lnum);
+		c->lhead_offs = 0;
+	}
+
+	if (c->lhead_offs == 0) {
+		/* Must ensure next LEB has been unmapped */
+		err = ubifs_leb_unmap(c, c->lhead_lnum);
+		if (err)
+			goto out;
+	}
+
+	len = ALIGN(len, c->min_io_size);
+	dbg_log("writing commit start at LEB %d:0, len %d", c->lhead_lnum, len);
+	err = ubifs_leb_write(c, c->lhead_lnum, cs, 0, len);
+	if (err)
+		goto out;
+
+	*ltail_lnum = c->lhead_lnum;
+
+	c->lhead_offs += len;
+	if (c->lhead_offs == c->leb_size) {
+		c->lhead_lnum = ubifs_next_log_lnum(c, c->lhead_lnum);
+		c->lhead_offs = 0;
+	}
+
+	remove_buds(c);
+
+	/*
+	 * We have started the commit and now users may use the rest of the log
+	 * for new writes.
+	 */
+	c->min_log_bytes = 0;
+
+out:
+	kfree(buf);
+	return err;
+}
+
+/**
+ * ubifs_log_end_commit - end commit.
+ * @c: UBIFS file-system description object
+ * @ltail_lnum: new log tail LEB number
+ *
+ * This function is called on when the commit operation was finished. It
+ * moves log tail to new position and unmaps LEBs which contain obsolete data.
+ * Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+int ubifs_log_end_commit(struct ubifs_info *c, int ltail_lnum)
+{
+	int err;
+
+	/*
+	 * At this phase we have to lock 'c->log_mutex' because UBIFS allows FS
+	 * writes during commit. Its only short "commit" start phase when
+	 * writers are blocked.
+	 */
+	mutex_lock(&c->log_mutex);
+
+	dbg_log("old tail was LEB %d:0, new tail is LEB %d:0",
+		c->ltail_lnum, ltail_lnum);
+
+	c->ltail_lnum = ltail_lnum;
+	/*
+	 * The commit is finished and from now on it must be guaranteed that
+	 * there is always enough space for the next commit.
+	 */
+	c->min_log_bytes = c->leb_size;
+
+	spin_lock(&c->buds_lock);
+	c->bud_bytes -= c->cmt_bud_bytes;
+	spin_unlock(&c->buds_lock);
+
+	err = dbg_check_bud_bytes(c);
+
+	mutex_unlock(&c->log_mutex);
+	return err;
+}
+
+/**
+ * ubifs_log_post_commit - things to do after commit is completed.
+ * @c: UBIFS file-system description object
+ * @old_ltail_lnum: old log tail LEB number
+ *
+ * Release buds only after commit is completed, because they must be unchanged
+ * if recovery is needed.
+ *
+ * Unmap log LEBs only after commit is completed, because they may be needed for
+ * recovery.
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+int ubifs_log_post_commit(struct ubifs_info *c, int old_ltail_lnum)
+{
+	int lnum, err = 0;
+
+	while (!list_empty(&c->old_buds)) {
+		struct ubifs_bud *bud;
+
+		bud = list_entry(c->old_buds.next, struct ubifs_bud, list);
+		err = ubifs_return_leb(c, bud->lnum);
+		if (err)
+			return err;
+		list_del(&bud->list);
+		kfree(bud);
+	}
+	mutex_lock(&c->log_mutex);
+	for (lnum = old_ltail_lnum; lnum != c->ltail_lnum;
+	     lnum = ubifs_next_log_lnum(c, lnum)) {
+		dbg_log("unmap log LEB %d", lnum);
+		err = ubifs_leb_unmap(c, lnum);
+		if (err)
+			goto out;
+	}
+out:
+	mutex_unlock(&c->log_mutex);
+	return err;
+}
+
+/**
+ * struct done_ref - references that have been done.
+ * @rb: rb-tree node
+ * @lnum: LEB number
+ */
+struct done_ref {
+	struct rb_node rb;
+	int lnum;
+};
+
+/**
+ * done_already - determine if a reference has been done already.
+ * @done_tree: rb-tree to store references that have been done
+ * @lnum: LEB number of reference
+ *
+ * This function returns %1 if the reference has been done, %0 if not, otherwise
+ * a negative error code is returned.
+ */
+static int done_already(struct rb_root *done_tree, int lnum)
+{
+	struct rb_node **p = &done_tree->rb_node, *parent = NULL;
+	struct done_ref *dr;
+
+	while (*p) {
+		parent = *p;
+		dr = rb_entry(parent, struct done_ref, rb);
+		if (lnum < dr->lnum)
+			p = &(*p)->rb_left;
+		else if (lnum > dr->lnum)
+			p = &(*p)->rb_right;
+		else
+			return 1;
+	}
+
+	dr = kzalloc(sizeof(struct done_ref), GFP_NOFS);
+	if (!dr)
+		return -ENOMEM;
+
+	dr->lnum = lnum;
+
+	rb_link_node(&dr->rb, parent, p);
+	rb_insert_color(&dr->rb, done_tree);
+
+	return 0;
+}
+
+/**
+ * destroy_done_tree - destroy the done tree.
+ * @done_tree: done tree to destroy
+ */
+static void destroy_done_tree(struct rb_root *done_tree)
+{
+	struct done_ref *dr, *n;
+
+	rbtree_postorder_for_each_entry_safe(dr, n, done_tree, rb)
+		kfree(dr);
+}
+
+/**
+ * add_node - add a node to the consolidated log.
+ * @c: UBIFS file-system description object
+ * @buf: buffer to which to add
+ * @lnum: LEB number to which to write is passed and returned here
+ * @offs: offset to where to write is passed and returned here
+ * @node: node to add
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int add_node(struct ubifs_info *c, void *buf, int *lnum, int *offs,
+		    void *node)
+{
+	struct ubifs_ch *ch = node;
+	int len = le32_to_cpu(ch->len), remains = c->leb_size - *offs;
+
+	if (len > remains) {
+		int sz = ALIGN(*offs, c->min_io_size), err;
+
+		ubifs_pad(c, buf + *offs, sz - *offs);
+		err = ubifs_leb_change(c, *lnum, buf, sz);
+		if (err)
+			return err;
+		*lnum = ubifs_next_log_lnum(c, *lnum);
+		*offs = 0;
+	}
+	memcpy(buf + *offs, node, len);
+	*offs += ALIGN(len, 8);
+	return 0;
+}
+
+/**
+ * ubifs_consolidate_log - consolidate the log.
+ * @c: UBIFS file-system description object
+ *
+ * Repeated failed commits could cause the log to be full, but at least 1 LEB is
+ * needed for commit. This function rewrites the reference nodes in the log
+ * omitting duplicates, and failed CS nodes, and leaving no gaps.
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+int ubifs_consolidate_log(struct ubifs_info *c)
+{
+	struct ubifs_scan_leb *sleb;
+	struct ubifs_scan_node *snod;
+	struct rb_root done_tree = RB_ROOT;
+	int lnum, err, first = 1, write_lnum, offs = 0;
+	void *buf;
+
+	dbg_rcvry("log tail LEB %d, log head LEB %d", c->ltail_lnum,
+		  c->lhead_lnum);
+	buf = vmalloc(c->leb_size);
+	if (!buf)
+		return -ENOMEM;
+	lnum = c->ltail_lnum;
+	write_lnum = lnum;
+	while (1) {
+		sleb = ubifs_scan(c, lnum, 0, c->sbuf, 0);
+		if (IS_ERR(sleb)) {
+			err = PTR_ERR(sleb);
+			goto out_free;
+		}
+		list_for_each_entry(snod, &sleb->nodes, list) {
+			switch (snod->type) {
+			case UBIFS_REF_NODE: {
+				struct ubifs_ref_node *ref = snod->node;
+				int ref_lnum = le32_to_cpu(ref->lnum);
+
+				err = done_already(&done_tree, ref_lnum);
+				if (err < 0)
+					goto out_scan;
+				if (err != 1) {
+					err = add_node(c, buf, &write_lnum,
+						       &offs, snod->node);
+					if (err)
+						goto out_scan;
+				}
+				break;
+			}
+			case UBIFS_CS_NODE:
+				if (!first)
+					break;
+				err = add_node(c, buf, &write_lnum, &offs,
+					       snod->node);
+				if (err)
+					goto out_scan;
+				first = 0;
+				break;
+			}
+		}
+		ubifs_scan_destroy(sleb);
+		if (lnum == c->lhead_lnum)
+			break;
+		lnum = ubifs_next_log_lnum(c, lnum);
+	}
+	if (offs) {
+		int sz = ALIGN(offs, c->min_io_size);
+
+		ubifs_pad(c, buf + offs, sz - offs);
+		err = ubifs_leb_change(c, write_lnum, buf, sz);
+		if (err)
+			goto out_free;
+		offs = ALIGN(offs, c->min_io_size);
+	}
+	destroy_done_tree(&done_tree);
+	vfree(buf);
+	if (write_lnum == c->lhead_lnum) {
+		ubifs_err("log is too full");
+		return -EINVAL;
+	}
+	/* Unmap remaining LEBs */
+	lnum = write_lnum;
+	do {
+		lnum = ubifs_next_log_lnum(c, lnum);
+		err = ubifs_leb_unmap(c, lnum);
+		if (err)
+			return err;
+	} while (lnum != c->lhead_lnum);
+	c->lhead_lnum = write_lnum;
+	c->lhead_offs = offs;
+	dbg_rcvry("new log head at %d:%d", c->lhead_lnum, c->lhead_offs);
+	return 0;
+
+out_scan:
+	ubifs_scan_destroy(sleb);
+out_free:
+	destroy_done_tree(&done_tree);
+	vfree(buf);
+	return err;
+}
+
+/**
+ * dbg_check_bud_bytes - make sure bud bytes calculation are all right.
+ * @c: UBIFS file-system description object
+ *
+ * This function makes sure the amount of flash space used by closed buds
+ * ('c->bud_bytes' is correct). Returns zero in case of success and %-EINVAL in
+ * case of failure.
+ */
+static int dbg_check_bud_bytes(struct ubifs_info *c)
+{
+	int i, err = 0;
+	struct ubifs_bud *bud;
+	long long bud_bytes = 0;
+
+	if (!dbg_is_chk_gen(c))
+		return 0;
+
+	spin_lock(&c->buds_lock);
+	for (i = 0; i < c->jhead_cnt; i++)
+		list_for_each_entry(bud, &c->jheads[i].buds_list, list)
+			bud_bytes += c->leb_size - bud->start;
+
+	if (c->bud_bytes != bud_bytes) {
+		ubifs_err("bad bud_bytes %lld, calculated %lld",
+			  c->bud_bytes, bud_bytes);
+		err = -EINVAL;
+	}
 	spin_unlock(&c->buds_lock);
+
+	return err;
 }
diff --git a/fs/ubifs/lprops.c b/fs/ubifs/lprops.c
index 8ce4949..fc6686b 100644
--- a/fs/ubifs/lprops.c
+++ b/fs/ubifs/lprops.c
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Adrian Hunter
  *          Artem Bityutskiy (Битюцкий Артём)
@@ -28,6 +17,10 @@
  * an empty LEB for the journal, or a very dirty LEB for garbage collection.
  */
 
+#define __UBOOT__
+#ifdef __UBOOT__
+#include <linux/err.h>
+#endif
 #include "ubifs.h"
 
 /**
@@ -281,7 +274,7 @@ void ubifs_add_to_cat(struct ubifs_info *c, struct ubifs_lprops *lprops,
 	case LPROPS_FREE:
 		if (add_to_lpt_heap(c, lprops, cat))
 			break;
-		/* No more room on heap so make it uncategorized */
+		/* No more room on heap so make it un-categorized */
 		cat = LPROPS_UNCAT;
 		/* Fall through */
 	case LPROPS_UNCAT:
@@ -300,8 +293,11 @@ void ubifs_add_to_cat(struct ubifs_info *c, struct ubifs_lprops *lprops,
 	default:
 		ubifs_assert(0);
 	}
+
 	lprops->flags &= ~LPROPS_CAT_MASK;
 	lprops->flags |= cat;
+	c->in_a_category_cnt += 1;
+	ubifs_assert(c->in_a_category_cnt <= c->main_lebs);
 }
 
 /**
@@ -334,6 +330,9 @@ static void ubifs_remove_from_cat(struct ubifs_info *c,
 	default:
 		ubifs_assert(0);
 	}
+
+	c->in_a_category_cnt -= 1;
+	ubifs_assert(c->in_a_category_cnt >= 0);
 }
 
 /**
@@ -375,8 +374,8 @@ void ubifs_replace_cat(struct ubifs_info *c, struct ubifs_lprops *old_lprops,
  * @lprops: LEB properties
  *
  * A LEB may have fallen off of the bottom of a heap, and ended up as
- * uncategorized even though it has enough space for us now. If that is the case
- * this function will put the LEB back onto a heap.
+ * un-categorized even though it has enough space for us now. If that is the
+ * case this function will put the LEB back onto a heap.
  */
 void ubifs_ensure_cat(struct ubifs_info *c, struct ubifs_lprops *lprops)
 {
@@ -436,10 +435,10 @@ int ubifs_categorize_lprops(const struct ubifs_info *c,
 /**
  * change_category - change LEB properties category.
  * @c: UBIFS file-system description object
- * @lprops: LEB properties to recategorize
+ * @lprops: LEB properties to re-categorize
  *
  * LEB properties are categorized to enable fast find operations. When the LEB
- * properties change they must be recategorized.
+ * properties change they must be re-categorized.
  */
 static void change_category(struct ubifs_info *c, struct ubifs_lprops *lprops)
 {
@@ -447,7 +446,7 @@ static void change_category(struct ubifs_info *c, struct ubifs_lprops *lprops)
 	int new_cat = ubifs_categorize_lprops(c, lprops);
 
 	if (old_cat == new_cat) {
-		struct ubifs_lpt_heap *heap = &c->lpt_heap[new_cat - 1];
+		struct ubifs_lpt_heap *heap;
 
 		/* lprops on a heap now must be moved up or down */
 		if (new_cat < 1 || new_cat > LPROPS_HEAP_CNT)
@@ -461,21 +460,18 @@ static void change_category(struct ubifs_info *c, struct ubifs_lprops *lprops)
 }
 
 /**
- * calc_dark - calculate LEB dark space size.
+ * ubifs_calc_dark - calculate LEB dark space size.
  * @c: the UBIFS file-system description object
  * @spc: amount of free and dirty space in the LEB
  *
- * This function calculates amount of dark space in an LEB which has @spc bytes
- * of free and dirty space. Returns the calculations result.
+ * This function calculates and returns amount of dark space in an LEB which
+ * has @spc bytes of free and dirty space.
  *
- * Dark space is the space which is not always usable - it depends on which
- * nodes are written in which order. E.g., if an LEB has only 512 free bytes,
- * it is dark space, because it cannot fit a large data node. So UBIFS cannot
- * count on this LEB and treat these 512 bytes as usable because it is not true
- * if, for example, only big chunks of uncompressible data will be written to
- * the FS.
+ * UBIFS is trying to account the space which might not be usable, and this
+ * space is called "dark space". For example, if an LEB has only %512 free
+ * bytes, it is dark space, because it cannot fit a large data node.
  */
-static int calc_dark(struct ubifs_info *c, int spc)
+int ubifs_calc_dark(const struct ubifs_info *c, int spc)
 {
 	ubifs_assert(!(spc & 7));
 
@@ -507,7 +503,7 @@ static int is_lprops_dirty(struct ubifs_info *c, struct ubifs_lprops *lprops)
 	pnode = (struct ubifs_pnode *)container_of(lprops - pos,
 						   struct ubifs_pnode,
 						   lprops[0]);
-	return !test_bit(COW_ZNODE, &pnode->flags) &&
+	return !test_bit(COW_CNODE, &pnode->flags) &&
 	       test_bit(DIRTY_CNODE, &pnode->flags);
 }
 
@@ -518,7 +514,7 @@ static int is_lprops_dirty(struct ubifs_info *c, struct ubifs_lprops *lprops)
  * @free: new free space amount
  * @dirty: new dirty space amount
  * @flags: new flags
- * @idx_gc_cnt: change to the count of idx_gc list
+ * @idx_gc_cnt: change to the count of @idx_gc list
  *
  * This function changes LEB properties (@free, @dirty or @flag). However, the
  * property which has the %LPROPS_NC value is not changed. Returns a pointer to
@@ -535,7 +531,7 @@ const struct ubifs_lprops *ubifs_change_lp(struct ubifs_info *c,
 {
 	/*
 	 * This is the only function that is allowed to change lprops, so we
-	 * discard the const qualifier.
+	 * discard the "const" qualifier.
 	 */
 	struct ubifs_lprops *lprops = (struct ubifs_lprops *)lp;
 
@@ -575,7 +571,7 @@ const struct ubifs_lprops *ubifs_change_lp(struct ubifs_info *c,
 		if (old_spc < c->dead_wm)
 			c->lst.total_dead -= old_spc;
 		else
-			c->lst.total_dark -= calc_dark(c, old_spc);
+			c->lst.total_dark -= ubifs_calc_dark(c, old_spc);
 
 		c->lst.total_used -= c->leb_size - old_spc;
 	}
@@ -616,7 +612,7 @@ const struct ubifs_lprops *ubifs_change_lp(struct ubifs_info *c,
 		if (new_spc < c->dead_wm)
 			c->lst.total_dead += new_spc;
 		else
-			c->lst.total_dark += calc_dark(c, new_spc);
+			c->lst.total_dark += ubifs_calc_dark(c, new_spc);
 
 		c->lst.total_used += c->leb_size - new_spc;
 	}
@@ -678,6 +674,9 @@ int ubifs_change_one_lp(struct ubifs_info *c, int lnum, int free, int dirty,
 
 out:
 	ubifs_release_lprops(c);
+	if (err)
+		ubifs_err("cannot change properties of LEB %d, error %d",
+			  lnum, err);
 	return err;
 }
 
@@ -714,6 +713,9 @@ int ubifs_update_one_lp(struct ubifs_info *c, int lnum, int free, int dirty,
 
 out:
 	ubifs_release_lprops(c);
+	if (err)
+		ubifs_err("cannot update properties of LEB %d, error %d",
+			  lnum, err);
 	return err;
 }
 
@@ -737,6 +739,8 @@ int ubifs_read_one_lp(struct ubifs_info *c, int lnum, struct ubifs_lprops *lp)
 	lpp = ubifs_lpt_lookup(c, lnum);
 	if (IS_ERR(lpp)) {
 		err = PTR_ERR(lpp);
+		ubifs_err("cannot read properties of LEB %d, error %d",
+			  lnum, err);
 		goto out;
 	}
 
@@ -840,3 +844,471 @@ const struct ubifs_lprops *ubifs_fast_find_frdi_idx(struct ubifs_info *c)
 	ubifs_assert(lprops->free + lprops->dirty == c->leb_size);
 	return lprops;
 }
+
+/*
+ * Everything below is related to debugging.
+ */
+
+/**
+ * dbg_check_cats - check category heaps and lists.
+ * @c: UBIFS file-system description object
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+int dbg_check_cats(struct ubifs_info *c)
+{
+	struct ubifs_lprops *lprops;
+	struct list_head *pos;
+	int i, cat;
+
+	if (!dbg_is_chk_gen(c) && !dbg_is_chk_lprops(c))
+		return 0;
+
+	list_for_each_entry(lprops, &c->empty_list, list) {
+		if (lprops->free != c->leb_size) {
+			ubifs_err("non-empty LEB %d on empty list (free %d dirty %d flags %d)",
+				  lprops->lnum, lprops->free, lprops->dirty,
+				  lprops->flags);
+			return -EINVAL;
+		}
+		if (lprops->flags & LPROPS_TAKEN) {
+			ubifs_err("taken LEB %d on empty list (free %d dirty %d flags %d)",
+				  lprops->lnum, lprops->free, lprops->dirty,
+				  lprops->flags);
+			return -EINVAL;
+		}
+	}
+
+	i = 0;
+	list_for_each_entry(lprops, &c->freeable_list, list) {
+		if (lprops->free + lprops->dirty != c->leb_size) {
+			ubifs_err("non-freeable LEB %d on freeable list (free %d dirty %d flags %d)",
+				  lprops->lnum, lprops->free, lprops->dirty,
+				  lprops->flags);
+			return -EINVAL;
+		}
+		if (lprops->flags & LPROPS_TAKEN) {
+			ubifs_err("taken LEB %d on freeable list (free %d dirty %d flags %d)",
+				  lprops->lnum, lprops->free, lprops->dirty,
+				  lprops->flags);
+			return -EINVAL;
+		}
+		i += 1;
+	}
+	if (i != c->freeable_cnt) {
+		ubifs_err("freeable list count %d expected %d", i,
+			  c->freeable_cnt);
+		return -EINVAL;
+	}
+
+	i = 0;
+	list_for_each(pos, &c->idx_gc)
+		i += 1;
+	if (i != c->idx_gc_cnt) {
+		ubifs_err("idx_gc list count %d expected %d", i,
+			  c->idx_gc_cnt);
+		return -EINVAL;
+	}
+
+	list_for_each_entry(lprops, &c->frdi_idx_list, list) {
+		if (lprops->free + lprops->dirty != c->leb_size) {
+			ubifs_err("non-freeable LEB %d on frdi_idx list (free %d dirty %d flags %d)",
+				  lprops->lnum, lprops->free, lprops->dirty,
+				  lprops->flags);
+			return -EINVAL;
+		}
+		if (lprops->flags & LPROPS_TAKEN) {
+			ubifs_err("taken LEB %d on frdi_idx list (free %d dirty %d flags %d)",
+				  lprops->lnum, lprops->free, lprops->dirty,
+				  lprops->flags);
+			return -EINVAL;
+		}
+		if (!(lprops->flags & LPROPS_INDEX)) {
+			ubifs_err("non-index LEB %d on frdi_idx list (free %d dirty %d flags %d)",
+				  lprops->lnum, lprops->free, lprops->dirty,
+				  lprops->flags);
+			return -EINVAL;
+		}
+	}
+
+	for (cat = 1; cat <= LPROPS_HEAP_CNT; cat++) {
+		struct ubifs_lpt_heap *heap = &c->lpt_heap[cat - 1];
+
+		for (i = 0; i < heap->cnt; i++) {
+			lprops = heap->arr[i];
+			if (!lprops) {
+				ubifs_err("null ptr in LPT heap cat %d", cat);
+				return -EINVAL;
+			}
+			if (lprops->hpos != i) {
+				ubifs_err("bad ptr in LPT heap cat %d", cat);
+				return -EINVAL;
+			}
+			if (lprops->flags & LPROPS_TAKEN) {
+				ubifs_err("taken LEB in LPT heap cat %d", cat);
+				return -EINVAL;
+			}
+		}
+	}
+
+	return 0;
+}
+
+void dbg_check_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat,
+		    int add_pos)
+{
+	int i = 0, j, err = 0;
+
+	if (!dbg_is_chk_gen(c) && !dbg_is_chk_lprops(c))
+		return;
+
+	for (i = 0; i < heap->cnt; i++) {
+		struct ubifs_lprops *lprops = heap->arr[i];
+		struct ubifs_lprops *lp;
+
+		if (i != add_pos)
+			if ((lprops->flags & LPROPS_CAT_MASK) != cat) {
+				err = 1;
+				goto out;
+			}
+		if (lprops->hpos != i) {
+			err = 2;
+			goto out;
+		}
+		lp = ubifs_lpt_lookup(c, lprops->lnum);
+		if (IS_ERR(lp)) {
+			err = 3;
+			goto out;
+		}
+		if (lprops != lp) {
+			ubifs_err("lprops %zx lp %zx lprops->lnum %d lp->lnum %d",
+				  (size_t)lprops, (size_t)lp, lprops->lnum,
+				  lp->lnum);
+			err = 4;
+			goto out;
+		}
+		for (j = 0; j < i; j++) {
+			lp = heap->arr[j];
+			if (lp == lprops) {
+				err = 5;
+				goto out;
+			}
+			if (lp->lnum == lprops->lnum) {
+				err = 6;
+				goto out;
+			}
+		}
+	}
+out:
+	if (err) {
+		ubifs_err("failed cat %d hpos %d err %d", cat, i, err);
+		dump_stack();
+		ubifs_dump_heap(c, heap, cat);
+	}
+}
+
+/**
+ * scan_check_cb - scan callback.
+ * @c: the UBIFS file-system description object
+ * @lp: LEB properties to scan
+ * @in_tree: whether the LEB properties are in main memory
+ * @lst: lprops statistics to update
+ *
+ * This function returns a code that indicates whether the scan should continue
+ * (%LPT_SCAN_CONTINUE), whether the LEB properties should be added to the tree
+ * in main memory (%LPT_SCAN_ADD), or whether the scan should stop
+ * (%LPT_SCAN_STOP).
+ */
+static int scan_check_cb(struct ubifs_info *c,
+			 const struct ubifs_lprops *lp, int in_tree,
+			 struct ubifs_lp_stats *lst)
+{
+	struct ubifs_scan_leb *sleb;
+	struct ubifs_scan_node *snod;
+	int cat, lnum = lp->lnum, is_idx = 0, used = 0, freef, dirty, ret;
+	void *buf = NULL;
+
+	cat = lp->flags & LPROPS_CAT_MASK;
+	if (cat != LPROPS_UNCAT) {
+		cat = ubifs_categorize_lprops(c, lp);
+		if (cat != (lp->flags & LPROPS_CAT_MASK)) {
+			ubifs_err("bad LEB category %d expected %d",
+				  (lp->flags & LPROPS_CAT_MASK), cat);
+			return -EINVAL;
+		}
+	}
+
+	/* Check lp is on its category list (if it has one) */
+	if (in_tree) {
+		struct list_head *list = NULL;
+
+		switch (cat) {
+		case LPROPS_EMPTY:
+			list = &c->empty_list;
+			break;
+		case LPROPS_FREEABLE:
+			list = &c->freeable_list;
+			break;
+		case LPROPS_FRDI_IDX:
+			list = &c->frdi_idx_list;
+			break;
+		case LPROPS_UNCAT:
+			list = &c->uncat_list;
+			break;
+		}
+		if (list) {
+			struct ubifs_lprops *lprops;
+			int found = 0;
+
+			list_for_each_entry(lprops, list, list) {
+				if (lprops == lp) {
+					found = 1;
+					break;
+				}
+			}
+			if (!found) {
+				ubifs_err("bad LPT list (category %d)", cat);
+				return -EINVAL;
+			}
+		}
+	}
+
+	/* Check lp is on its category heap (if it has one) */
+	if (in_tree && cat > 0 && cat <= LPROPS_HEAP_CNT) {
+		struct ubifs_lpt_heap *heap = &c->lpt_heap[cat - 1];
+
+		if ((lp->hpos != -1 && heap->arr[lp->hpos]->lnum != lnum) ||
+		    lp != heap->arr[lp->hpos]) {
+			ubifs_err("bad LPT heap (category %d)", cat);
+			return -EINVAL;
+		}
+	}
+
+	buf = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	/*
+	 * After an unclean unmount, empty and freeable LEBs
+	 * may contain garbage - do not scan them.
+	 */
+	if (lp->free == c->leb_size) {
+		lst->empty_lebs += 1;
+		lst->total_free += c->leb_size;
+		lst->total_dark += ubifs_calc_dark(c, c->leb_size);
+		return LPT_SCAN_CONTINUE;
+	}
+	if (lp->free + lp->dirty == c->leb_size &&
+	    !(lp->flags & LPROPS_INDEX)) {
+		lst->total_free  += lp->free;
+		lst->total_dirty += lp->dirty;
+		lst->total_dark  +=  ubifs_calc_dark(c, c->leb_size);
+		return LPT_SCAN_CONTINUE;
+	}
+
+	sleb = ubifs_scan(c, lnum, 0, buf, 0);
+	if (IS_ERR(sleb)) {
+		ret = PTR_ERR(sleb);
+		if (ret == -EUCLEAN) {
+			ubifs_dump_lprops(c);
+			ubifs_dump_budg(c, &c->bi);
+		}
+		goto out;
+	}
+
+	is_idx = -1;
+	list_for_each_entry(snod, &sleb->nodes, list) {
+		int found, level = 0;
+
+		cond_resched();
+
+		if (is_idx == -1)
+			is_idx = (snod->type == UBIFS_IDX_NODE) ? 1 : 0;
+
+		if (is_idx && snod->type != UBIFS_IDX_NODE) {
+			ubifs_err("indexing node in data LEB %d:%d",
+				  lnum, snod->offs);
+			goto out_destroy;
+		}
+
+		if (snod->type == UBIFS_IDX_NODE) {
+			struct ubifs_idx_node *idx = snod->node;
+
+			key_read(c, ubifs_idx_key(c, idx), &snod->key);
+			level = le16_to_cpu(idx->level);
+		}
+
+		found = ubifs_tnc_has_node(c, &snod->key, level, lnum,
+					   snod->offs, is_idx);
+		if (found) {
+			if (found < 0)
+				goto out_destroy;
+			used += ALIGN(snod->len, 8);
+		}
+	}
+
+	freef = c->leb_size - sleb->endpt;
+	dirty = sleb->endpt - used;
+
+	if (freef > c->leb_size || freef < 0 || dirty > c->leb_size ||
+	    dirty < 0) {
+		ubifs_err("bad calculated accounting for LEB %d: free %d, dirty %d",
+			  lnum, freef, dirty);
+		goto out_destroy;
+	}
+
+	if (lp->free + lp->dirty == c->leb_size &&
+	    freef + dirty == c->leb_size)
+		if ((is_idx && !(lp->flags & LPROPS_INDEX)) ||
+		    (!is_idx && freef == c->leb_size) ||
+		    lp->free == c->leb_size) {
+			/*
+			 * Empty or freeable LEBs could contain index
+			 * nodes from an uncompleted commit due to an
+			 * unclean unmount. Or they could be empty for
+			 * the same reason. Or it may simply not have been
+			 * unmapped.
+			 */
+			freef = lp->free;
+			dirty = lp->dirty;
+			is_idx = 0;
+		    }
+
+	if (is_idx && lp->free + lp->dirty == freef + dirty &&
+	    lnum != c->ihead_lnum) {
+		/*
+		 * After an unclean unmount, an index LEB could have a different
+		 * amount of free space than the value recorded by lprops. That
+		 * is because the in-the-gaps method may use free space or
+		 * create free space (as a side-effect of using ubi_leb_change
+		 * and not writing the whole LEB). The incorrect free space
+		 * value is not a problem because the index is only ever
+		 * allocated empty LEBs, so there will never be an attempt to
+		 * write to the free space at the end of an index LEB - except
+		 * by the in-the-gaps method for which it is not a problem.
+		 */
+		freef = lp->free;
+		dirty = lp->dirty;
+	}
+
+	if (lp->free != freef || lp->dirty != dirty)
+		goto out_print;
+
+	if (is_idx && !(lp->flags & LPROPS_INDEX)) {
+		if (freef == c->leb_size)
+			/* Free but not unmapped LEB, it's fine */
+			is_idx = 0;
+		else {
+			ubifs_err("indexing node without indexing flag");
+			goto out_print;
+		}
+	}
+
+	if (!is_idx && (lp->flags & LPROPS_INDEX)) {
+		ubifs_err("data node with indexing flag");
+		goto out_print;
+	}
+
+	if (freef == c->leb_size)
+		lst->empty_lebs += 1;
+
+	if (is_idx)
+		lst->idx_lebs += 1;
+
+	if (!(lp->flags & LPROPS_INDEX))
+		lst->total_used += c->leb_size - freef - dirty;
+	lst->total_free += freef;
+	lst->total_dirty += dirty;
+
+	if (!(lp->flags & LPROPS_INDEX)) {
+		int spc = freef + dirty;
+
+		if (spc < c->dead_wm)
+			lst->total_dead += spc;
+		else
+			lst->total_dark += ubifs_calc_dark(c, spc);
+	}
+
+	ubifs_scan_destroy(sleb);
+	vfree(buf);
+	return LPT_SCAN_CONTINUE;
+
+out_print:
+	ubifs_err("bad accounting of LEB %d: free %d, dirty %d flags %#x, should be free %d, dirty %d",
+		  lnum, lp->free, lp->dirty, lp->flags, freef, dirty);
+	ubifs_dump_leb(c, lnum);
+out_destroy:
+	ubifs_scan_destroy(sleb);
+	ret = -EINVAL;
+out:
+	vfree(buf);
+	return ret;
+}
+
+/**
+ * dbg_check_lprops - check all LEB properties.
+ * @c: UBIFS file-system description object
+ *
+ * This function checks all LEB properties and makes sure they are all correct.
+ * It returns zero if everything is fine, %-EINVAL if there is an inconsistency
+ * and other negative error codes in case of other errors. This function is
+ * called while the file system is locked (because of commit start), so no
+ * additional locking is required. Note that locking the LPT mutex would cause
+ * a circular lock dependency with the TNC mutex.
+ */
+int dbg_check_lprops(struct ubifs_info *c)
+{
+	int i, err;
+	struct ubifs_lp_stats lst;
+
+	if (!dbg_is_chk_lprops(c))
+		return 0;
+
+	/*
+	 * As we are going to scan the media, the write buffers have to be
+	 * synchronized.
+	 */
+	for (i = 0; i < c->jhead_cnt; i++) {
+		err = ubifs_wbuf_sync(&c->jheads[i].wbuf);
+		if (err)
+			return err;
+	}
+
+	memset(&lst, 0, sizeof(struct ubifs_lp_stats));
+	err = ubifs_lpt_scan_nolock(c, c->main_first, c->leb_cnt - 1,
+				    (ubifs_lpt_scan_callback)scan_check_cb,
+				    &lst);
+	if (err && err != -ENOSPC)
+		goto out;
+
+	if (lst.empty_lebs != c->lst.empty_lebs ||
+	    lst.idx_lebs != c->lst.idx_lebs ||
+	    lst.total_free != c->lst.total_free ||
+	    lst.total_dirty != c->lst.total_dirty ||
+	    lst.total_used != c->lst.total_used) {
+		ubifs_err("bad overall accounting");
+		ubifs_err("calculated: empty_lebs %d, idx_lebs %d, total_free %lld, total_dirty %lld, total_used %lld",
+			  lst.empty_lebs, lst.idx_lebs, lst.total_free,
+			  lst.total_dirty, lst.total_used);
+		ubifs_err("read from lprops: empty_lebs %d, idx_lebs %d, total_free %lld, total_dirty %lld, total_used %lld",
+			  c->lst.empty_lebs, c->lst.idx_lebs, c->lst.total_free,
+			  c->lst.total_dirty, c->lst.total_used);
+		err = -EINVAL;
+		goto out;
+	}
+
+	if (lst.total_dead != c->lst.total_dead ||
+	    lst.total_dark != c->lst.total_dark) {
+		ubifs_err("bad dead/dark space accounting");
+		ubifs_err("calculated: total_dead %lld, total_dark %lld",
+			  lst.total_dead, lst.total_dark);
+		ubifs_err("read from lprops: total_dead %lld, total_dark %lld",
+			  c->lst.total_dead, c->lst.total_dark);
+		err = -EINVAL;
+		goto out;
+	}
+
+	err = dbg_check_cats(c);
+out:
+	return err;
+}
diff --git a/fs/ubifs/lpt.c b/fs/ubifs/lpt.c
index 1a50d4c..c49d3b0 100644
--- a/fs/ubifs/lpt.c
+++ b/fs/ubifs/lpt.c
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Adrian Hunter
  *          Artem Bityutskiy (Битюцкий Артём)
@@ -44,8 +33,17 @@
  */
 
 #include "ubifs.h"
-#include "crc16.h"
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/crc16.h>
 #include <linux/math64.h>
+#include <linux/slab.h>
+#else
+#include <linux/compat.h>
+#include <linux/err.h>
+#include <ubi_uboot.h>
+#include "crc16.h"
+#endif
 
 /**
  * do_calc_lpt_geom - calculate sizes for the LPT area.
@@ -159,6 +157,119 @@ int ubifs_calc_lpt_geom(struct ubifs_info *c)
 }
 
 /**
+ * calc_dflt_lpt_geom - calculate default LPT geometry.
+ * @c: the UBIFS file-system description object
+ * @main_lebs: number of main area LEBs is passed and returned here
+ * @big_lpt: whether the LPT area is "big" is returned here
+ *
+ * The size of the LPT area depends on parameters that themselves are dependent
+ * on the size of the LPT area. This function, successively recalculates the LPT
+ * area geometry until the parameters and resultant geometry are consistent.
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int calc_dflt_lpt_geom(struct ubifs_info *c, int *main_lebs,
+			      int *big_lpt)
+{
+	int i, lebs_needed;
+	long long sz;
+
+	/* Start by assuming the minimum number of LPT LEBs */
+	c->lpt_lebs = UBIFS_MIN_LPT_LEBS;
+	c->main_lebs = *main_lebs - c->lpt_lebs;
+	if (c->main_lebs <= 0)
+		return -EINVAL;
+
+	/* And assume we will use the small LPT model */
+	c->big_lpt = 0;
+
+	/*
+	 * Calculate the geometry based on assumptions above and then see if it
+	 * makes sense
+	 */
+	do_calc_lpt_geom(c);
+
+	/* Small LPT model must have lpt_sz < leb_size */
+	if (c->lpt_sz > c->leb_size) {
+		/* Nope, so try again using big LPT model */
+		c->big_lpt = 1;
+		do_calc_lpt_geom(c);
+	}
+
+	/* Now check there are enough LPT LEBs */
+	for (i = 0; i < 64 ; i++) {
+		sz = c->lpt_sz * 4; /* Allow 4 times the size */
+		lebs_needed = div_u64(sz + c->leb_size - 1, c->leb_size);
+		if (lebs_needed > c->lpt_lebs) {
+			/* Not enough LPT LEBs so try again with more */
+			c->lpt_lebs = lebs_needed;
+			c->main_lebs = *main_lebs - c->lpt_lebs;
+			if (c->main_lebs <= 0)
+				return -EINVAL;
+			do_calc_lpt_geom(c);
+			continue;
+		}
+		if (c->ltab_sz > c->leb_size) {
+			ubifs_err("LPT ltab too big");
+			return -EINVAL;
+		}
+		*main_lebs = c->main_lebs;
+		*big_lpt = c->big_lpt;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+/**
+ * pack_bits - pack bit fields end-to-end.
+ * @addr: address at which to pack (passed and next address returned)
+ * @pos: bit position at which to pack (passed and next position returned)
+ * @val: value to pack
+ * @nrbits: number of bits of value to pack (1-32)
+ */
+static void pack_bits(uint8_t **addr, int *pos, uint32_t val, int nrbits)
+{
+	uint8_t *p = *addr;
+	int b = *pos;
+
+	ubifs_assert(nrbits > 0);
+	ubifs_assert(nrbits <= 32);
+	ubifs_assert(*pos >= 0);
+	ubifs_assert(*pos < 8);
+	ubifs_assert((val >> nrbits) == 0 || nrbits == 32);
+	if (b) {
+		*p |= ((uint8_t)val) << b;
+		nrbits += b;
+		if (nrbits > 8) {
+			*++p = (uint8_t)(val >>= (8 - b));
+			if (nrbits > 16) {
+				*++p = (uint8_t)(val >>= 8);
+				if (nrbits > 24) {
+					*++p = (uint8_t)(val >>= 8);
+					if (nrbits > 32)
+						*++p = (uint8_t)(val >>= 8);
+				}
+			}
+		}
+	} else {
+		*p = (uint8_t)val;
+		if (nrbits > 8) {
+			*++p = (uint8_t)(val >>= 8);
+			if (nrbits > 16) {
+				*++p = (uint8_t)(val >>= 8);
+				if (nrbits > 24)
+					*++p = (uint8_t)(val >>= 8);
+			}
+		}
+	}
+	b = nrbits & 7;
+	if (b == 0)
+		p++;
+	*addr = p;
+	*pos = b;
+}
+
+/**
  * ubifs_unpack_bits - unpack bit fields.
  * @addr: address at which to unpack (passed and next address returned)
  * @pos: bit position at which to unpack (passed and next position returned)
@@ -228,6 +339,118 @@ uint32_t ubifs_unpack_bits(uint8_t **addr, int *pos, int nrbits)
 }
 
 /**
+ * ubifs_pack_pnode - pack all the bit fields of a pnode.
+ * @c: UBIFS file-system description object
+ * @buf: buffer into which to pack
+ * @pnode: pnode to pack
+ */
+void ubifs_pack_pnode(struct ubifs_info *c, void *buf,
+		      struct ubifs_pnode *pnode)
+{
+	uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES;
+	int i, pos = 0;
+	uint16_t crc;
+
+	pack_bits(&addr, &pos, UBIFS_LPT_PNODE, UBIFS_LPT_TYPE_BITS);
+	if (c->big_lpt)
+		pack_bits(&addr, &pos, pnode->num, c->pcnt_bits);
+	for (i = 0; i < UBIFS_LPT_FANOUT; i++) {
+		pack_bits(&addr, &pos, pnode->lprops[i].free >> 3,
+			  c->space_bits);
+		pack_bits(&addr, &pos, pnode->lprops[i].dirty >> 3,
+			  c->space_bits);
+		if (pnode->lprops[i].flags & LPROPS_INDEX)
+			pack_bits(&addr, &pos, 1, 1);
+		else
+			pack_bits(&addr, &pos, 0, 1);
+	}
+	crc = crc16(-1, buf + UBIFS_LPT_CRC_BYTES,
+		    c->pnode_sz - UBIFS_LPT_CRC_BYTES);
+	addr = buf;
+	pos = 0;
+	pack_bits(&addr, &pos, crc, UBIFS_LPT_CRC_BITS);
+}
+
+/**
+ * ubifs_pack_nnode - pack all the bit fields of a nnode.
+ * @c: UBIFS file-system description object
+ * @buf: buffer into which to pack
+ * @nnode: nnode to pack
+ */
+void ubifs_pack_nnode(struct ubifs_info *c, void *buf,
+		      struct ubifs_nnode *nnode)
+{
+	uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES;
+	int i, pos = 0;
+	uint16_t crc;
+
+	pack_bits(&addr, &pos, UBIFS_LPT_NNODE, UBIFS_LPT_TYPE_BITS);
+	if (c->big_lpt)
+		pack_bits(&addr, &pos, nnode->num, c->pcnt_bits);
+	for (i = 0; i < UBIFS_LPT_FANOUT; i++) {
+		int lnum = nnode->nbranch[i].lnum;
+
+		if (lnum == 0)
+			lnum = c->lpt_last + 1;
+		pack_bits(&addr, &pos, lnum - c->lpt_first, c->lpt_lnum_bits);
+		pack_bits(&addr, &pos, nnode->nbranch[i].offs,
+			  c->lpt_offs_bits);
+	}
+	crc = crc16(-1, buf + UBIFS_LPT_CRC_BYTES,
+		    c->nnode_sz - UBIFS_LPT_CRC_BYTES);
+	addr = buf;
+	pos = 0;
+	pack_bits(&addr, &pos, crc, UBIFS_LPT_CRC_BITS);
+}
+
+/**
+ * ubifs_pack_ltab - pack the LPT's own lprops table.
+ * @c: UBIFS file-system description object
+ * @buf: buffer into which to pack
+ * @ltab: LPT's own lprops table to pack
+ */
+void ubifs_pack_ltab(struct ubifs_info *c, void *buf,
+		     struct ubifs_lpt_lprops *ltab)
+{
+	uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES;
+	int i, pos = 0;
+	uint16_t crc;
+
+	pack_bits(&addr, &pos, UBIFS_LPT_LTAB, UBIFS_LPT_TYPE_BITS);
+	for (i = 0; i < c->lpt_lebs; i++) {
+		pack_bits(&addr, &pos, ltab[i].free, c->lpt_spc_bits);
+		pack_bits(&addr, &pos, ltab[i].dirty, c->lpt_spc_bits);
+	}
+	crc = crc16(-1, buf + UBIFS_LPT_CRC_BYTES,
+		    c->ltab_sz - UBIFS_LPT_CRC_BYTES);
+	addr = buf;
+	pos = 0;
+	pack_bits(&addr, &pos, crc, UBIFS_LPT_CRC_BITS);
+}
+
+/**
+ * ubifs_pack_lsave - pack the LPT's save table.
+ * @c: UBIFS file-system description object
+ * @buf: buffer into which to pack
+ * @lsave: LPT's save table to pack
+ */
+void ubifs_pack_lsave(struct ubifs_info *c, void *buf, int *lsave)
+{
+	uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES;
+	int i, pos = 0;
+	uint16_t crc;
+
+	pack_bits(&addr, &pos, UBIFS_LPT_LSAVE, UBIFS_LPT_TYPE_BITS);
+	for (i = 0; i < c->lsave_cnt; i++)
+		pack_bits(&addr, &pos, lsave[i], c->lnum_bits);
+	crc = crc16(-1, buf + UBIFS_LPT_CRC_BYTES,
+		    c->lsave_sz - UBIFS_LPT_CRC_BYTES);
+	addr = buf;
+	pos = 0;
+	pack_bits(&addr, &pos, crc, UBIFS_LPT_CRC_BITS);
+}
+
+/**
  * ubifs_add_lpt_dirt - add dirty space to LPT LEB properties.
  * @c: UBIFS file-system description object
  * @lnum: LEB number to which to add dirty space
@@ -244,6 +467,23 @@ void ubifs_add_lpt_dirt(struct ubifs_info *c, int lnum, int dirty)
 }
 
 /**
+ * set_ltab - set LPT LEB properties.
+ * @c: UBIFS file-system description object
+ * @lnum: LEB number
+ * @free: amount of free space
+ * @dirty: amount of dirty space
+ */
+static void set_ltab(struct ubifs_info *c, int lnum, int free, int dirty)
+{
+	dbg_lp("LEB %d free %d dirty %d to %d %d",
+	       lnum, c->ltab[lnum - c->lpt_first].free,
+	       c->ltab[lnum - c->lpt_first].dirty, free, dirty);
+	ubifs_assert(lnum >= c->lpt_first && lnum <= c->lpt_last);
+	c->ltab[lnum - c->lpt_first].free = free;
+	c->ltab[lnum - c->lpt_first].dirty = dirty;
+}
+
+/**
  * ubifs_add_nnode_dirt - add dirty space to LPT LEB properties.
  * @c: UBIFS file-system description object
  * @nnode: nnode for which to add dirt
@@ -276,6 +516,31 @@ static void add_pnode_dirt(struct ubifs_info *c, struct ubifs_pnode *pnode)
 }
 
 /**
+ * calc_nnode_num - calculate nnode number.
+ * @row: the row in the tree (root is zero)
+ * @col: the column in the row (leftmost is zero)
+ *
+ * The nnode number is a number that uniquely identifies a nnode and can be used
+ * easily to traverse the tree from the root to that nnode.
+ *
+ * This function calculates and returns the nnode number for the nnode at @row
+ * and @col.
+ */
+static int calc_nnode_num(int row, int col)
+{
+	int num, bits;
+
+	num = 1;
+	while (row--) {
+		bits = (col & (UBIFS_LPT_FANOUT - 1));
+		col >>= UBIFS_LPT_FANOUT_SHIFT;
+		num <<= UBIFS_LPT_FANOUT_SHIFT;
+		num |= bits;
+	}
+	return num;
+}
+
+/**
  * calc_nnode_num_from_parent - calculate nnode number.
  * @c: UBIFS file-system description object
  * @parent: parent nnode
@@ -328,6 +593,269 @@ static int calc_pnode_num_from_parent(const struct ubifs_info *c,
 }
 
 /**
+ * ubifs_create_dflt_lpt - create default LPT.
+ * @c: UBIFS file-system description object
+ * @main_lebs: number of main area LEBs is passed and returned here
+ * @lpt_first: LEB number of first LPT LEB
+ * @lpt_lebs: number of LEBs for LPT is passed and returned here
+ * @big_lpt: use big LPT model is passed and returned here
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+int ubifs_create_dflt_lpt(struct ubifs_info *c, int *main_lebs, int lpt_first,
+			  int *lpt_lebs, int *big_lpt)
+{
+	int lnum, err = 0, node_sz, iopos, i, j, cnt, len, alen, row;
+	int blnum, boffs, bsz, bcnt;
+	struct ubifs_pnode *pnode = NULL;
+	struct ubifs_nnode *nnode = NULL;
+	void *buf = NULL, *p;
+	struct ubifs_lpt_lprops *ltab = NULL;
+	int *lsave = NULL;
+
+	err = calc_dflt_lpt_geom(c, main_lebs, big_lpt);
+	if (err)
+		return err;
+	*lpt_lebs = c->lpt_lebs;
+
+	/* Needed by 'ubifs_pack_nnode()' and 'set_ltab()' */
+	c->lpt_first = lpt_first;
+	/* Needed by 'set_ltab()' */
+	c->lpt_last = lpt_first + c->lpt_lebs - 1;
+	/* Needed by 'ubifs_pack_lsave()' */
+	c->main_first = c->leb_cnt - *main_lebs;
+
+	lsave = kmalloc(sizeof(int) * c->lsave_cnt, GFP_KERNEL);
+	pnode = kzalloc(sizeof(struct ubifs_pnode), GFP_KERNEL);
+	nnode = kzalloc(sizeof(struct ubifs_nnode), GFP_KERNEL);
+	buf = vmalloc(c->leb_size);
+	ltab = vmalloc(sizeof(struct ubifs_lpt_lprops) * c->lpt_lebs);
+	if (!pnode || !nnode || !buf || !ltab || !lsave) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	ubifs_assert(!c->ltab);
+	c->ltab = ltab; /* Needed by set_ltab */
+
+	/* Initialize LPT's own lprops */
+	for (i = 0; i < c->lpt_lebs; i++) {
+		ltab[i].free = c->leb_size;
+		ltab[i].dirty = 0;
+		ltab[i].tgc = 0;
+		ltab[i].cmt = 0;
+	}
+
+	lnum = lpt_first;
+	p = buf;
+	/* Number of leaf nodes (pnodes) */
+	cnt = c->pnode_cnt;
+
+	/*
+	 * The first pnode contains the LEB properties for the LEBs that contain
+	 * the root inode node and the root index node of the index tree.
+	 */
+	node_sz = ALIGN(ubifs_idx_node_sz(c, 1), 8);
+	iopos = ALIGN(node_sz, c->min_io_size);
+	pnode->lprops[0].free = c->leb_size - iopos;
+	pnode->lprops[0].dirty = iopos - node_sz;
+	pnode->lprops[0].flags = LPROPS_INDEX;
+
+	node_sz = UBIFS_INO_NODE_SZ;
+	iopos = ALIGN(node_sz, c->min_io_size);
+	pnode->lprops[1].free = c->leb_size - iopos;
+	pnode->lprops[1].dirty = iopos - node_sz;
+
+	for (i = 2; i < UBIFS_LPT_FANOUT; i++)
+		pnode->lprops[i].free = c->leb_size;
+
+	/* Add first pnode */
+	ubifs_pack_pnode(c, p, pnode);
+	p += c->pnode_sz;
+	len = c->pnode_sz;
+	pnode->num += 1;
+
+	/* Reset pnode values for remaining pnodes */
+	pnode->lprops[0].free = c->leb_size;
+	pnode->lprops[0].dirty = 0;
+	pnode->lprops[0].flags = 0;
+
+	pnode->lprops[1].free = c->leb_size;
+	pnode->lprops[1].dirty = 0;
+
+	/*
+	 * To calculate the internal node branches, we keep information about
+	 * the level below.
+	 */
+	blnum = lnum; /* LEB number of level below */
+	boffs = 0; /* Offset of level below */
+	bcnt = cnt; /* Number of nodes in level below */
+	bsz = c->pnode_sz; /* Size of nodes in level below */
+
+	/* Add all remaining pnodes */
+	for (i = 1; i < cnt; i++) {
+		if (len + c->pnode_sz > c->leb_size) {
+			alen = ALIGN(len, c->min_io_size);
+			set_ltab(c, lnum, c->leb_size - alen, alen - len);
+			memset(p, 0xff, alen - len);
+			err = ubifs_leb_change(c, lnum++, buf, alen);
+			if (err)
+				goto out;
+			p = buf;
+			len = 0;
+		}
+		ubifs_pack_pnode(c, p, pnode);
+		p += c->pnode_sz;
+		len += c->pnode_sz;
+		/*
+		 * pnodes are simply numbered left to right starting at zero,
+		 * which means the pnode number can be used easily to traverse
+		 * down the tree to the corresponding pnode.
+		 */
+		pnode->num += 1;
+	}
+
+	row = 0;
+	for (i = UBIFS_LPT_FANOUT; cnt > i; i <<= UBIFS_LPT_FANOUT_SHIFT)
+		row += 1;
+	/* Add all nnodes, one level at a time */
+	while (1) {
+		/* Number of internal nodes (nnodes) at next level */
+		cnt = DIV_ROUND_UP(cnt, UBIFS_LPT_FANOUT);
+		for (i = 0; i < cnt; i++) {
+			if (len + c->nnode_sz > c->leb_size) {
+				alen = ALIGN(len, c->min_io_size);
+				set_ltab(c, lnum, c->leb_size - alen,
+					    alen - len);
+				memset(p, 0xff, alen - len);
+				err = ubifs_leb_change(c, lnum++, buf, alen);
+				if (err)
+					goto out;
+				p = buf;
+				len = 0;
+			}
+			/* Only 1 nnode at this level, so it is the root */
+			if (cnt == 1) {
+				c->lpt_lnum = lnum;
+				c->lpt_offs = len;
+			}
+			/* Set branches to the level below */
+			for (j = 0; j < UBIFS_LPT_FANOUT; j++) {
+				if (bcnt) {
+					if (boffs + bsz > c->leb_size) {
+						blnum += 1;
+						boffs = 0;
+					}
+					nnode->nbranch[j].lnum = blnum;
+					nnode->nbranch[j].offs = boffs;
+					boffs += bsz;
+					bcnt--;
+				} else {
+					nnode->nbranch[j].lnum = 0;
+					nnode->nbranch[j].offs = 0;
+				}
+			}
+			nnode->num = calc_nnode_num(row, i);
+			ubifs_pack_nnode(c, p, nnode);
+			p += c->nnode_sz;
+			len += c->nnode_sz;
+		}
+		/* Only 1 nnode at this level, so it is the root */
+		if (cnt == 1)
+			break;
+		/* Update the information about the level below */
+		bcnt = cnt;
+		bsz = c->nnode_sz;
+		row -= 1;
+	}
+
+	if (*big_lpt) {
+		/* Need to add LPT's save table */
+		if (len + c->lsave_sz > c->leb_size) {
+			alen = ALIGN(len, c->min_io_size);
+			set_ltab(c, lnum, c->leb_size - alen, alen - len);
+			memset(p, 0xff, alen - len);
+			err = ubifs_leb_change(c, lnum++, buf, alen);
+			if (err)
+				goto out;
+			p = buf;
+			len = 0;
+		}
+
+		c->lsave_lnum = lnum;
+		c->lsave_offs = len;
+
+		for (i = 0; i < c->lsave_cnt && i < *main_lebs; i++)
+			lsave[i] = c->main_first + i;
+		for (; i < c->lsave_cnt; i++)
+			lsave[i] = c->main_first;
+
+		ubifs_pack_lsave(c, p, lsave);
+		p += c->lsave_sz;
+		len += c->lsave_sz;
+	}
+
+	/* Need to add LPT's own LEB properties table */
+	if (len + c->ltab_sz > c->leb_size) {
+		alen = ALIGN(len, c->min_io_size);
+		set_ltab(c, lnum, c->leb_size - alen, alen - len);
+		memset(p, 0xff, alen - len);
+		err = ubifs_leb_change(c, lnum++, buf, alen);
+		if (err)
+			goto out;
+		p = buf;
+		len = 0;
+	}
+
+	c->ltab_lnum = lnum;
+	c->ltab_offs = len;
+
+	/* Update ltab before packing it */
+	len += c->ltab_sz;
+	alen = ALIGN(len, c->min_io_size);
+	set_ltab(c, lnum, c->leb_size - alen, alen - len);
+
+	ubifs_pack_ltab(c, p, ltab);
+	p += c->ltab_sz;
+
+	/* Write remaining buffer */
+	memset(p, 0xff, alen - len);
+	err = ubifs_leb_change(c, lnum, buf, alen);
+	if (err)
+		goto out;
+
+	c->nhead_lnum = lnum;
+	c->nhead_offs = ALIGN(len, c->min_io_size);
+
+	dbg_lp("space_bits %d", c->space_bits);
+	dbg_lp("lpt_lnum_bits %d", c->lpt_lnum_bits);
+	dbg_lp("lpt_offs_bits %d", c->lpt_offs_bits);
+	dbg_lp("lpt_spc_bits %d", c->lpt_spc_bits);
+	dbg_lp("pcnt_bits %d", c->pcnt_bits);
+	dbg_lp("lnum_bits %d", c->lnum_bits);
+	dbg_lp("pnode_sz %d", c->pnode_sz);
+	dbg_lp("nnode_sz %d", c->nnode_sz);
+	dbg_lp("ltab_sz %d", c->ltab_sz);
+	dbg_lp("lsave_sz %d", c->lsave_sz);
+	dbg_lp("lsave_cnt %d", c->lsave_cnt);
+	dbg_lp("lpt_hght %d", c->lpt_hght);
+	dbg_lp("big_lpt %d", c->big_lpt);
+	dbg_lp("LPT root is at %d:%d", c->lpt_lnum, c->lpt_offs);
+	dbg_lp("LPT head is at %d:%d", c->nhead_lnum, c->nhead_offs);
+	dbg_lp("LPT ltab is at %d:%d", c->ltab_lnum, c->ltab_offs);
+	if (c->big_lpt)
+		dbg_lp("LPT lsave is at %d:%d", c->lsave_lnum, c->lsave_offs);
+out:
+	c->ltab = NULL;
+	kfree(lsave);
+	vfree(ltab);
+	vfree(buf);
+	kfree(nnode);
+	kfree(pnode);
+	return err;
+}
+
+/**
  * update_cats - add LEB properties of a pnode to LEB category lists and heaps.
  * @c: UBIFS file-system description object
  * @pnode: pnode
@@ -392,7 +920,7 @@ static int check_lpt_crc(void *buf, int len)
 	if (crc != calc_crc) {
 		ubifs_err("invalid crc in LPT node: crc %hx calc %hx", crc,
 			  calc_crc);
-		dbg_dump_stack();
+		dump_stack();
 		return -EINVAL;
 	}
 	return 0;
@@ -415,7 +943,7 @@ static int check_lpt_type(uint8_t **addr, int *pos, int type)
 	if (node_type != type) {
 		ubifs_err("invalid type (%d) in LPT node type %d", node_type,
 			  type);
-		dbg_dump_stack();
+		dump_stack();
 		return -EINVAL;
 	}
 	return 0;
@@ -524,6 +1052,34 @@ static int unpack_ltab(const struct ubifs_info *c, void *buf)
 	return err;
 }
 
+#ifndef __UBOOT__
+/**
+ * unpack_lsave - unpack the LPT's save table.
+ * @c: UBIFS file-system description object
+ * @buf: buffer from which to unpack
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int unpack_lsave(const struct ubifs_info *c, void *buf)
+{
+	uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES;
+	int i, pos = 0, err;
+
+	err = check_lpt_type(&addr, &pos, UBIFS_LPT_LSAVE);
+	if (err)
+		return err;
+	for (i = 0; i < c->lsave_cnt; i++) {
+		int lnum = ubifs_unpack_bits(&addr, &pos, c->lnum_bits);
+
+		if (lnum < c->main_first || lnum >= c->leb_cnt)
+			return -EINVAL;
+		c->lsave[i] = lnum;
+	}
+	err = check_lpt_crc(buf, c->lsave_sz);
+	return err;
+}
+#endif
+
 /**
  * validate_nnode - validate a nnode.
  * @c: UBIFS file-system description object
@@ -662,7 +1218,7 @@ int ubifs_read_nnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip)
 		if (c->big_lpt)
 			nnode->num = calc_nnode_num_from_parent(c, parent, iip);
 	} else {
-		err = ubi_read(c->ubi, lnum, buf, offs, c->nnode_sz);
+		err = ubifs_leb_read(c, lnum, buf, offs, c->nnode_sz, 1);
 		if (err)
 			goto out;
 		err = ubifs_unpack_nnode(c, buf, nnode);
@@ -687,6 +1243,7 @@ int ubifs_read_nnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip)
 
 out:
 	ubifs_err("error %d reading nnode at %d:%d", err, lnum, offs);
+	dump_stack();
 	kfree(nnode);
 	return err;
 }
@@ -710,10 +1267,9 @@ static int read_pnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip)
 	lnum = branch->lnum;
 	offs = branch->offs;
 	pnode = kzalloc(sizeof(struct ubifs_pnode), GFP_NOFS);
-	if (!pnode) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!pnode)
+		return -ENOMEM;
+
 	if (lnum == 0) {
 		/*
 		 * This pnode was not written which just means that the LEB
@@ -731,7 +1287,7 @@ static int read_pnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip)
 			lprops->flags = ubifs_categorize_lprops(c, lprops);
 		}
 	} else {
-		err = ubi_read(c->ubi, lnum, buf, offs, c->pnode_sz);
+		err = ubifs_leb_read(c, lnum, buf, offs, c->pnode_sz, 1);
 		if (err)
 			goto out;
 		err = unpack_pnode(c, buf, pnode);
@@ -752,8 +1308,9 @@ static int read_pnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip)
 
 out:
 	ubifs_err("error %d reading pnode at %d:%d", err, lnum, offs);
-	dbg_dump_pnode(c, pnode, parent, iip);
-	dbg_msg("calc num: %d", calc_pnode_num_from_parent(c, parent, iip));
+	ubifs_dump_pnode(c, pnode, parent, iip);
+	dump_stack();
+	ubifs_err("calc num: %d", calc_pnode_num_from_parent(c, parent, iip));
 	kfree(pnode);
 	return err;
 }
@@ -772,7 +1329,7 @@ static int read_ltab(struct ubifs_info *c)
 	buf = vmalloc(c->ltab_sz);
 	if (!buf)
 		return -ENOMEM;
-	err = ubi_read(c->ubi, c->ltab_lnum, buf, c->ltab_offs, c->ltab_sz);
+	err = ubifs_leb_read(c, c->ltab_lnum, buf, c->ltab_offs, c->ltab_sz, 1);
 	if (err)
 		goto out;
 	err = unpack_ltab(c, buf);
@@ -781,6 +1338,50 @@ out:
 	return err;
 }
 
+#ifndef __UBOOT__
+/**
+ * read_lsave - read LPT's save table.
+ * @c: UBIFS file-system description object
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int read_lsave(struct ubifs_info *c)
+{
+	int err, i;
+	void *buf;
+
+	buf = vmalloc(c->lsave_sz);
+	if (!buf)
+		return -ENOMEM;
+	err = ubifs_leb_read(c, c->lsave_lnum, buf, c->lsave_offs,
+			     c->lsave_sz, 1);
+	if (err)
+		goto out;
+	err = unpack_lsave(c, buf);
+	if (err)
+		goto out;
+	for (i = 0; i < c->lsave_cnt; i++) {
+		int lnum = c->lsave[i];
+		struct ubifs_lprops *lprops;
+
+		/*
+		 * Due to automatic resizing, the values in the lsave table
+		 * could be beyond the volume size - just ignore them.
+		 */
+		if (lnum >= c->leb_cnt)
+			continue;
+		lprops = ubifs_lpt_lookup(c, lnum);
+		if (IS_ERR(lprops)) {
+			err = PTR_ERR(lprops);
+			goto out;
+		}
+	}
+out:
+	vfree(buf);
+	return err;
+}
+#endif
+
 /**
  * ubifs_get_nnode - get a nnode.
  * @c: UBIFS file-system description object
@@ -861,13 +1462,13 @@ struct ubifs_lprops *ubifs_lpt_lookup(struct ubifs_info *c, int lnum)
 		shft -= UBIFS_LPT_FANOUT_SHIFT;
 		nnode = ubifs_get_nnode(c, nnode, iip);
 		if (IS_ERR(nnode))
-			return ERR_PTR(PTR_ERR(nnode));
+			return ERR_CAST(nnode);
 	}
 	iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
 	shft -= UBIFS_LPT_FANOUT_SHIFT;
 	pnode = ubifs_get_pnode(c, nnode, iip);
 	if (IS_ERR(pnode))
-		return ERR_PTR(PTR_ERR(pnode));
+		return ERR_CAST(pnode);
 	iip = (i & (UBIFS_LPT_FANOUT - 1));
 	dbg_lp("LEB %d, free %d, dirty %d, flags %d", lnum,
 	       pnode->lprops[iip].free, pnode->lprops[iip].dirty,
@@ -990,7 +1591,7 @@ struct ubifs_lprops *ubifs_lpt_lookup_dirty(struct ubifs_info *c, int lnum)
 	nnode = c->nroot;
 	nnode = dirty_cow_nnode(c, nnode);
 	if (IS_ERR(nnode))
-		return ERR_PTR(PTR_ERR(nnode));
+		return ERR_CAST(nnode);
 	i = lnum - c->main_first;
 	shft = c->lpt_hght * UBIFS_LPT_FANOUT_SHIFT;
 	for (h = 1; h < c->lpt_hght; h++) {
@@ -998,19 +1599,19 @@ struct ubifs_lprops *ubifs_lpt_lookup_dirty(struct ubifs_info *c, int lnum)
 		shft -= UBIFS_LPT_FANOUT_SHIFT;
 		nnode = ubifs_get_nnode(c, nnode, iip);
 		if (IS_ERR(nnode))
-			return ERR_PTR(PTR_ERR(nnode));
+			return ERR_CAST(nnode);
 		nnode = dirty_cow_nnode(c, nnode);
 		if (IS_ERR(nnode))
-			return ERR_PTR(PTR_ERR(nnode));
+			return ERR_CAST(nnode);
 	}
 	iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
 	shft -= UBIFS_LPT_FANOUT_SHIFT;
 	pnode = ubifs_get_pnode(c, nnode, iip);
 	if (IS_ERR(pnode))
-		return ERR_PTR(PTR_ERR(pnode));
+		return ERR_CAST(pnode);
 	pnode = dirty_cow_pnode(c, pnode);
 	if (IS_ERR(pnode))
-		return ERR_PTR(PTR_ERR(pnode));
+		return ERR_CAST(pnode);
 	iip = (i & (UBIFS_LPT_FANOUT - 1));
 	dbg_lp("LEB %d, free %d, dirty %d, flags %d", lnum,
 	       pnode->lprops[iip].free, pnode->lprops[iip].dirty,
@@ -1079,6 +1680,47 @@ static int lpt_init_rd(struct ubifs_info *c)
 	return 0;
 }
 
+#ifndef __UBOOT__
+/**
+ * lpt_init_wr - initialize the LPT for writing.
+ * @c: UBIFS file-system description object
+ *
+ * 'lpt_init_rd()' must have been called already.
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int lpt_init_wr(struct ubifs_info *c)
+{
+	int err, i;
+
+	c->ltab_cmt = vmalloc(sizeof(struct ubifs_lpt_lprops) * c->lpt_lebs);
+	if (!c->ltab_cmt)
+		return -ENOMEM;
+
+	c->lpt_buf = vmalloc(c->leb_size);
+	if (!c->lpt_buf)
+		return -ENOMEM;
+
+	if (c->big_lpt) {
+		c->lsave = kmalloc(sizeof(int) * c->lsave_cnt, GFP_NOFS);
+		if (!c->lsave)
+			return -ENOMEM;
+		err = read_lsave(c);
+		if (err)
+			return err;
+	}
+
+	for (i = 0; i < c->lpt_lebs; i++)
+		if (c->ltab[i].free == c->leb_size) {
+			err = ubifs_leb_unmap(c, i + c->lpt_first);
+			if (err)
+				return err;
+		}
+
+	return 0;
+}
+#endif
+
 /**
  * ubifs_lpt_init - initialize the LPT.
  * @c: UBIFS file-system description object
@@ -1098,8 +1740,546 @@ int ubifs_lpt_init(struct ubifs_info *c, int rd, int wr)
 	if (rd) {
 		err = lpt_init_rd(c);
 		if (err)
+			goto out_err;
+	}
+
+#ifndef __UBOOT__
+	if (wr) {
+		err = lpt_init_wr(c);
+		if (err)
+			goto out_err;
+	}
+#endif
+
+	return 0;
+
+out_err:
+#ifndef __UBOOT__
+	if (wr)
+		ubifs_lpt_free(c, 1);
+#endif
+	if (rd)
+		ubifs_lpt_free(c, 0);
+	return err;
+}
+
+/**
+ * struct lpt_scan_node - somewhere to put nodes while we scan LPT.
+ * @nnode: where to keep a nnode
+ * @pnode: where to keep a pnode
+ * @cnode: where to keep a cnode
+ * @in_tree: is the node in the tree in memory
+ * @ptr.nnode: pointer to the nnode (if it is an nnode) which may be here or in
+ * the tree
+ * @ptr.pnode: ditto for pnode
+ * @ptr.cnode: ditto for cnode
+ */
+struct lpt_scan_node {
+	union {
+		struct ubifs_nnode nnode;
+		struct ubifs_pnode pnode;
+		struct ubifs_cnode cnode;
+	};
+	int in_tree;
+	union {
+		struct ubifs_nnode *nnode;
+		struct ubifs_pnode *pnode;
+		struct ubifs_cnode *cnode;
+	} ptr;
+};
+
+/**
+ * scan_get_nnode - for the scan, get a nnode from either the tree or flash.
+ * @c: the UBIFS file-system description object
+ * @path: where to put the nnode
+ * @parent: parent of the nnode
+ * @iip: index in parent of the nnode
+ *
+ * This function returns a pointer to the nnode on success or a negative error
+ * code on failure.
+ */
+static struct ubifs_nnode *scan_get_nnode(struct ubifs_info *c,
+					  struct lpt_scan_node *path,
+					  struct ubifs_nnode *parent, int iip)
+{
+	struct ubifs_nbranch *branch;
+	struct ubifs_nnode *nnode;
+	void *buf = c->lpt_nod_buf;
+	int err;
+
+	branch = &parent->nbranch[iip];
+	nnode = branch->nnode;
+	if (nnode) {
+		path->in_tree = 1;
+		path->ptr.nnode = nnode;
+		return nnode;
+	}
+	nnode = &path->nnode;
+	path->in_tree = 0;
+	path->ptr.nnode = nnode;
+	memset(nnode, 0, sizeof(struct ubifs_nnode));
+	if (branch->lnum == 0) {
+		/*
+		 * This nnode was not written which just means that the LEB
+		 * properties in the subtree below it describe empty LEBs. We
+		 * make the nnode as though we had read it, which in fact means
+		 * doing almost nothing.
+		 */
+		if (c->big_lpt)
+			nnode->num = calc_nnode_num_from_parent(c, parent, iip);
+	} else {
+		err = ubifs_leb_read(c, branch->lnum, buf, branch->offs,
+				     c->nnode_sz, 1);
+		if (err)
+			return ERR_PTR(err);
+		err = ubifs_unpack_nnode(c, buf, nnode);
+		if (err)
+			return ERR_PTR(err);
+	}
+	err = validate_nnode(c, nnode, parent, iip);
+	if (err)
+		return ERR_PTR(err);
+	if (!c->big_lpt)
+		nnode->num = calc_nnode_num_from_parent(c, parent, iip);
+	nnode->level = parent->level - 1;
+	nnode->parent = parent;
+	nnode->iip = iip;
+	return nnode;
+}
+
+/**
+ * scan_get_pnode - for the scan, get a pnode from either the tree or flash.
+ * @c: the UBIFS file-system description object
+ * @path: where to put the pnode
+ * @parent: parent of the pnode
+ * @iip: index in parent of the pnode
+ *
+ * This function returns a pointer to the pnode on success or a negative error
+ * code on failure.
+ */
+static struct ubifs_pnode *scan_get_pnode(struct ubifs_info *c,
+					  struct lpt_scan_node *path,
+					  struct ubifs_nnode *parent, int iip)
+{
+	struct ubifs_nbranch *branch;
+	struct ubifs_pnode *pnode;
+	void *buf = c->lpt_nod_buf;
+	int err;
+
+	branch = &parent->nbranch[iip];
+	pnode = branch->pnode;
+	if (pnode) {
+		path->in_tree = 1;
+		path->ptr.pnode = pnode;
+		return pnode;
+	}
+	pnode = &path->pnode;
+	path->in_tree = 0;
+	path->ptr.pnode = pnode;
+	memset(pnode, 0, sizeof(struct ubifs_pnode));
+	if (branch->lnum == 0) {
+		/*
+		 * This pnode was not written which just means that the LEB
+		 * properties in it describe empty LEBs. We make the pnode as
+		 * though we had read it.
+		 */
+		int i;
+
+		if (c->big_lpt)
+			pnode->num = calc_pnode_num_from_parent(c, parent, iip);
+		for (i = 0; i < UBIFS_LPT_FANOUT; i++) {
+			struct ubifs_lprops * const lprops = &pnode->lprops[i];
+
+			lprops->free = c->leb_size;
+			lprops->flags = ubifs_categorize_lprops(c, lprops);
+		}
+	} else {
+		ubifs_assert(branch->lnum >= c->lpt_first &&
+			     branch->lnum <= c->lpt_last);
+		ubifs_assert(branch->offs >= 0 && branch->offs < c->leb_size);
+		err = ubifs_leb_read(c, branch->lnum, buf, branch->offs,
+				     c->pnode_sz, 1);
+		if (err)
+			return ERR_PTR(err);
+		err = unpack_pnode(c, buf, pnode);
+		if (err)
+			return ERR_PTR(err);
+	}
+	err = validate_pnode(c, pnode, parent, iip);
+	if (err)
+		return ERR_PTR(err);
+	if (!c->big_lpt)
+		pnode->num = calc_pnode_num_from_parent(c, parent, iip);
+	pnode->parent = parent;
+	pnode->iip = iip;
+	set_pnode_lnum(c, pnode);
+	return pnode;
+}
+
+/**
+ * ubifs_lpt_scan_nolock - scan the LPT.
+ * @c: the UBIFS file-system description object
+ * @start_lnum: LEB number from which to start scanning
+ * @end_lnum: LEB number at which to stop scanning
+ * @scan_cb: callback function called for each lprops
+ * @data: data to be passed to the callback function
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+int ubifs_lpt_scan_nolock(struct ubifs_info *c, int start_lnum, int end_lnum,
+			  ubifs_lpt_scan_callback scan_cb, void *data)
+{
+	int err = 0, i, h, iip, shft;
+	struct ubifs_nnode *nnode;
+	struct ubifs_pnode *pnode;
+	struct lpt_scan_node *path;
+
+	if (start_lnum == -1) {
+		start_lnum = end_lnum + 1;
+		if (start_lnum >= c->leb_cnt)
+			start_lnum = c->main_first;
+	}
+
+	ubifs_assert(start_lnum >= c->main_first && start_lnum < c->leb_cnt);
+	ubifs_assert(end_lnum >= c->main_first && end_lnum < c->leb_cnt);
+
+	if (!c->nroot) {
+		err = ubifs_read_nnode(c, NULL, 0);
+		if (err)
 			return err;
 	}
 
+	path = kmalloc(sizeof(struct lpt_scan_node) * (c->lpt_hght + 1),
+		       GFP_NOFS);
+	if (!path)
+		return -ENOMEM;
+
+	path[0].ptr.nnode = c->nroot;
+	path[0].in_tree = 1;
+again:
+	/* Descend to the pnode containing start_lnum */
+	nnode = c->nroot;
+	i = start_lnum - c->main_first;
+	shft = c->lpt_hght * UBIFS_LPT_FANOUT_SHIFT;
+	for (h = 1; h < c->lpt_hght; h++) {
+		iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
+		shft -= UBIFS_LPT_FANOUT_SHIFT;
+		nnode = scan_get_nnode(c, path + h, nnode, iip);
+		if (IS_ERR(nnode)) {
+			err = PTR_ERR(nnode);
+			goto out;
+		}
+	}
+	iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
+	shft -= UBIFS_LPT_FANOUT_SHIFT;
+	pnode = scan_get_pnode(c, path + h, nnode, iip);
+	if (IS_ERR(pnode)) {
+		err = PTR_ERR(pnode);
+		goto out;
+	}
+	iip = (i & (UBIFS_LPT_FANOUT - 1));
+
+	/* Loop for each lprops */
+	while (1) {
+		struct ubifs_lprops *lprops = &pnode->lprops[iip];
+		int ret, lnum = lprops->lnum;
+
+		ret = scan_cb(c, lprops, path[h].in_tree, data);
+		if (ret < 0) {
+			err = ret;
+			goto out;
+		}
+		if (ret & LPT_SCAN_ADD) {
+			/* Add all the nodes in path to the tree in memory */
+			for (h = 1; h < c->lpt_hght; h++) {
+				const size_t sz = sizeof(struct ubifs_nnode);
+				struct ubifs_nnode *parent;
+
+				if (path[h].in_tree)
+					continue;
+				nnode = kmemdup(&path[h].nnode, sz, GFP_NOFS);
+				if (!nnode) {
+					err = -ENOMEM;
+					goto out;
+				}
+				parent = nnode->parent;
+				parent->nbranch[nnode->iip].nnode = nnode;
+				path[h].ptr.nnode = nnode;
+				path[h].in_tree = 1;
+				path[h + 1].cnode.parent = nnode;
+			}
+			if (path[h].in_tree)
+				ubifs_ensure_cat(c, lprops);
+			else {
+				const size_t sz = sizeof(struct ubifs_pnode);
+				struct ubifs_nnode *parent;
+
+				pnode = kmemdup(&path[h].pnode, sz, GFP_NOFS);
+				if (!pnode) {
+					err = -ENOMEM;
+					goto out;
+				}
+				parent = pnode->parent;
+				parent->nbranch[pnode->iip].pnode = pnode;
+				path[h].ptr.pnode = pnode;
+				path[h].in_tree = 1;
+				update_cats(c, pnode);
+				c->pnodes_have += 1;
+			}
+			err = dbg_check_lpt_nodes(c, (struct ubifs_cnode *)
+						  c->nroot, 0, 0);
+			if (err)
+				goto out;
+			err = dbg_check_cats(c);
+			if (err)
+				goto out;
+		}
+		if (ret & LPT_SCAN_STOP) {
+			err = 0;
+			break;
+		}
+		/* Get the next lprops */
+		if (lnum == end_lnum) {
+			/*
+			 * We got to the end without finding what we were
+			 * looking for
+			 */
+			err = -ENOSPC;
+			goto out;
+		}
+		if (lnum + 1 >= c->leb_cnt) {
+			/* Wrap-around to the beginning */
+			start_lnum = c->main_first;
+			goto again;
+		}
+		if (iip + 1 < UBIFS_LPT_FANOUT) {
+			/* Next lprops is in the same pnode */
+			iip += 1;
+			continue;
+		}
+		/* We need to get the next pnode. Go up until we can go right */
+		iip = pnode->iip;
+		while (1) {
+			h -= 1;
+			ubifs_assert(h >= 0);
+			nnode = path[h].ptr.nnode;
+			if (iip + 1 < UBIFS_LPT_FANOUT)
+				break;
+			iip = nnode->iip;
+		}
+		/* Go right */
+		iip += 1;
+		/* Descend to the pnode */
+		h += 1;
+		for (; h < c->lpt_hght; h++) {
+			nnode = scan_get_nnode(c, path + h, nnode, iip);
+			if (IS_ERR(nnode)) {
+				err = PTR_ERR(nnode);
+				goto out;
+			}
+			iip = 0;
+		}
+		pnode = scan_get_pnode(c, path + h, nnode, iip);
+		if (IS_ERR(pnode)) {
+			err = PTR_ERR(pnode);
+			goto out;
+		}
+		iip = 0;
+	}
+out:
+	kfree(path);
+	return err;
+}
+
+/**
+ * dbg_chk_pnode - check a pnode.
+ * @c: the UBIFS file-system description object
+ * @pnode: pnode to check
+ * @col: pnode column
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int dbg_chk_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode,
+			 int col)
+{
+	int i;
+
+	if (pnode->num != col) {
+		ubifs_err("pnode num %d expected %d parent num %d iip %d",
+			  pnode->num, col, pnode->parent->num, pnode->iip);
+		return -EINVAL;
+	}
+	for (i = 0; i < UBIFS_LPT_FANOUT; i++) {
+		struct ubifs_lprops *lp, *lprops = &pnode->lprops[i];
+		int lnum = (pnode->num << UBIFS_LPT_FANOUT_SHIFT) + i +
+			   c->main_first;
+		int found, cat = lprops->flags & LPROPS_CAT_MASK;
+		struct ubifs_lpt_heap *heap;
+		struct list_head *list = NULL;
+
+		if (lnum >= c->leb_cnt)
+			continue;
+		if (lprops->lnum != lnum) {
+			ubifs_err("bad LEB number %d expected %d",
+				  lprops->lnum, lnum);
+			return -EINVAL;
+		}
+		if (lprops->flags & LPROPS_TAKEN) {
+			if (cat != LPROPS_UNCAT) {
+				ubifs_err("LEB %d taken but not uncat %d",
+					  lprops->lnum, cat);
+				return -EINVAL;
+			}
+			continue;
+		}
+		if (lprops->flags & LPROPS_INDEX) {
+			switch (cat) {
+			case LPROPS_UNCAT:
+			case LPROPS_DIRTY_IDX:
+			case LPROPS_FRDI_IDX:
+				break;
+			default:
+				ubifs_err("LEB %d index but cat %d",
+					  lprops->lnum, cat);
+				return -EINVAL;
+			}
+		} else {
+			switch (cat) {
+			case LPROPS_UNCAT:
+			case LPROPS_DIRTY:
+			case LPROPS_FREE:
+			case LPROPS_EMPTY:
+			case LPROPS_FREEABLE:
+				break;
+			default:
+				ubifs_err("LEB %d not index but cat %d",
+					  lprops->lnum, cat);
+				return -EINVAL;
+			}
+		}
+		switch (cat) {
+		case LPROPS_UNCAT:
+			list = &c->uncat_list;
+			break;
+		case LPROPS_EMPTY:
+			list = &c->empty_list;
+			break;
+		case LPROPS_FREEABLE:
+			list = &c->freeable_list;
+			break;
+		case LPROPS_FRDI_IDX:
+			list = &c->frdi_idx_list;
+			break;
+		}
+		found = 0;
+		switch (cat) {
+		case LPROPS_DIRTY:
+		case LPROPS_DIRTY_IDX:
+		case LPROPS_FREE:
+			heap = &c->lpt_heap[cat - 1];
+			if (lprops->hpos < heap->cnt &&
+			    heap->arr[lprops->hpos] == lprops)
+				found = 1;
+			break;
+		case LPROPS_UNCAT:
+		case LPROPS_EMPTY:
+		case LPROPS_FREEABLE:
+		case LPROPS_FRDI_IDX:
+			list_for_each_entry(lp, list, list)
+				if (lprops == lp) {
+					found = 1;
+					break;
+				}
+			break;
+		}
+		if (!found) {
+			ubifs_err("LEB %d cat %d not found in cat heap/list",
+				  lprops->lnum, cat);
+			return -EINVAL;
+		}
+		switch (cat) {
+		case LPROPS_EMPTY:
+			if (lprops->free != c->leb_size) {
+				ubifs_err("LEB %d cat %d free %d dirty %d",
+					  lprops->lnum, cat, lprops->free,
+					  lprops->dirty);
+				return -EINVAL;
+			}
+		case LPROPS_FREEABLE:
+		case LPROPS_FRDI_IDX:
+			if (lprops->free + lprops->dirty != c->leb_size) {
+				ubifs_err("LEB %d cat %d free %d dirty %d",
+					  lprops->lnum, cat, lprops->free,
+					  lprops->dirty);
+				return -EINVAL;
+			}
+		}
+	}
+	return 0;
+}
+
+/**
+ * dbg_check_lpt_nodes - check nnodes and pnodes.
+ * @c: the UBIFS file-system description object
+ * @cnode: next cnode (nnode or pnode) to check
+ * @row: row of cnode (root is zero)
+ * @col: column of cnode (leftmost is zero)
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+int dbg_check_lpt_nodes(struct ubifs_info *c, struct ubifs_cnode *cnode,
+			int row, int col)
+{
+	struct ubifs_nnode *nnode, *nn;
+	struct ubifs_cnode *cn;
+	int num, iip = 0, err;
+
+	if (!dbg_is_chk_lprops(c))
+		return 0;
+
+	while (cnode) {
+		ubifs_assert(row >= 0);
+		nnode = cnode->parent;
+		if (cnode->level) {
+			/* cnode is a nnode */
+			num = calc_nnode_num(row, col);
+			if (cnode->num != num) {
+				ubifs_err("nnode num %d expected %d parent num %d iip %d",
+					  cnode->num, num,
+					  (nnode ? nnode->num : 0), cnode->iip);
+				return -EINVAL;
+			}
+			nn = (struct ubifs_nnode *)cnode;
+			while (iip < UBIFS_LPT_FANOUT) {
+				cn = nn->nbranch[iip].cnode;
+				if (cn) {
+					/* Go down */
+					row += 1;
+					col <<= UBIFS_LPT_FANOUT_SHIFT;
+					col += iip;
+					iip = 0;
+					cnode = cn;
+					break;
+				}
+				/* Go right */
+				iip += 1;
+			}
+			if (iip < UBIFS_LPT_FANOUT)
+				continue;
+		} else {
+			struct ubifs_pnode *pnode;
+
+			/* cnode is a pnode */
+			pnode = (struct ubifs_pnode *)cnode;
+			err = dbg_chk_pnode(c, pnode, col);
+			if (err)
+				return err;
+		}
+		/* Go up and to the right */
+		row -= 1;
+		col >>= UBIFS_LPT_FANOUT_SHIFT;
+		iip = cnode->iip + 1;
+		cnode = (struct ubifs_cnode *)nnode;
+	}
 	return 0;
 }
diff --git a/fs/ubifs/lpt_commit.c b/fs/ubifs/lpt_commit.c
index c0af818..cad422e 100644
--- a/fs/ubifs/lpt_commit.c
+++ b/fs/ubifs/lpt_commit.c
@@ -3,30 +3,1294 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
+ * SPDX-License-Identifier:	GPL-2.0+
  *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
+ * Authors: Adrian Hunter
+ *          Artem Bityutskiy (Битюцкий Артём)
+ */
+
+/*
+ * This file implements commit-related functionality of the LEB properties
+ * subsystem.
+ */
+
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/crc16.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#else
+#include <linux/compat.h>
+#include <linux/err.h>
+#include "crc16.h"
+#endif
+#include "ubifs.h"
+
+#ifndef __UBOOT__
+static int dbg_populate_lsave(struct ubifs_info *c);
+#endif
+
+/**
+ * first_dirty_cnode - find first dirty cnode.
+ * @c: UBIFS file-system description object
+ * @nnode: nnode at which to start
+ *
+ * This function returns the first dirty cnode or %NULL if there is not one.
+ */
+static struct ubifs_cnode *first_dirty_cnode(struct ubifs_nnode *nnode)
+{
+	ubifs_assert(nnode);
+	while (1) {
+		int i, cont = 0;
+
+		for (i = 0; i < UBIFS_LPT_FANOUT; i++) {
+			struct ubifs_cnode *cnode;
+
+			cnode = nnode->nbranch[i].cnode;
+			if (cnode &&
+			    test_bit(DIRTY_CNODE, &cnode->flags)) {
+				if (cnode->level == 0)
+					return cnode;
+				nnode = (struct ubifs_nnode *)cnode;
+				cont = 1;
+				break;
+			}
+		}
+		if (!cont)
+			return (struct ubifs_cnode *)nnode;
+	}
+}
+
+/**
+ * next_dirty_cnode - find next dirty cnode.
+ * @cnode: cnode from which to begin searching
+ *
+ * This function returns the next dirty cnode or %NULL if there is not one.
+ */
+static struct ubifs_cnode *next_dirty_cnode(struct ubifs_cnode *cnode)
+{
+	struct ubifs_nnode *nnode;
+	int i;
+
+	ubifs_assert(cnode);
+	nnode = cnode->parent;
+	if (!nnode)
+		return NULL;
+	for (i = cnode->iip + 1; i < UBIFS_LPT_FANOUT; i++) {
+		cnode = nnode->nbranch[i].cnode;
+		if (cnode && test_bit(DIRTY_CNODE, &cnode->flags)) {
+			if (cnode->level == 0)
+				return cnode; /* cnode is a pnode */
+			/* cnode is a nnode */
+			return first_dirty_cnode((struct ubifs_nnode *)cnode);
+		}
+	}
+	return (struct ubifs_cnode *)nnode;
+}
+
+/**
+ * get_cnodes_to_commit - create list of dirty cnodes to commit.
+ * @c: UBIFS file-system description object
+ *
+ * This function returns the number of cnodes to commit.
+ */
+static int get_cnodes_to_commit(struct ubifs_info *c)
+{
+	struct ubifs_cnode *cnode, *cnext;
+	int cnt = 0;
+
+	if (!c->nroot)
+		return 0;
+
+	if (!test_bit(DIRTY_CNODE, &c->nroot->flags))
+		return 0;
+
+	c->lpt_cnext = first_dirty_cnode(c->nroot);
+	cnode = c->lpt_cnext;
+	if (!cnode)
+		return 0;
+	cnt += 1;
+	while (1) {
+		ubifs_assert(!test_bit(COW_CNODE, &cnode->flags));
+		__set_bit(COW_CNODE, &cnode->flags);
+		cnext = next_dirty_cnode(cnode);
+		if (!cnext) {
+			cnode->cnext = c->lpt_cnext;
+			break;
+		}
+		cnode->cnext = cnext;
+		cnode = cnext;
+		cnt += 1;
+	}
+	dbg_cmt("committing %d cnodes", cnt);
+	dbg_lp("committing %d cnodes", cnt);
+	ubifs_assert(cnt == c->dirty_nn_cnt + c->dirty_pn_cnt);
+	return cnt;
+}
+
+/**
+ * upd_ltab - update LPT LEB properties.
+ * @c: UBIFS file-system description object
+ * @lnum: LEB number
+ * @free: amount of free space
+ * @dirty: amount of dirty space to add
+ */
+static void upd_ltab(struct ubifs_info *c, int lnum, int free, int dirty)
+{
+	dbg_lp("LEB %d free %d dirty %d to %d +%d",
+	       lnum, c->ltab[lnum - c->lpt_first].free,
+	       c->ltab[lnum - c->lpt_first].dirty, free, dirty);
+	ubifs_assert(lnum >= c->lpt_first && lnum <= c->lpt_last);
+	c->ltab[lnum - c->lpt_first].free = free;
+	c->ltab[lnum - c->lpt_first].dirty += dirty;
+}
+
+/**
+ * alloc_lpt_leb - allocate an LPT LEB that is empty.
+ * @c: UBIFS file-system description object
+ * @lnum: LEB number is passed and returned here
+ *
+ * This function finds the next empty LEB in the ltab starting from @lnum. If a
+ * an empty LEB is found it is returned in @lnum and the function returns %0.
+ * Otherwise the function returns -ENOSPC.  Note however, that LPT is designed
+ * never to run out of space.
+ */
+static int alloc_lpt_leb(struct ubifs_info *c, int *lnum)
+{
+	int i, n;
+
+	n = *lnum - c->lpt_first + 1;
+	for (i = n; i < c->lpt_lebs; i++) {
+		if (c->ltab[i].tgc || c->ltab[i].cmt)
+			continue;
+		if (c->ltab[i].free == c->leb_size) {
+			c->ltab[i].cmt = 1;
+			*lnum = i + c->lpt_first;
+			return 0;
+		}
+	}
+
+	for (i = 0; i < n; i++) {
+		if (c->ltab[i].tgc || c->ltab[i].cmt)
+			continue;
+		if (c->ltab[i].free == c->leb_size) {
+			c->ltab[i].cmt = 1;
+			*lnum = i + c->lpt_first;
+			return 0;
+		}
+	}
+	return -ENOSPC;
+}
+
+/**
+ * layout_cnodes - layout cnodes for commit.
+ * @c: UBIFS file-system description object
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int layout_cnodes(struct ubifs_info *c)
+{
+	int lnum, offs, len, alen, done_lsave, done_ltab, err;
+	struct ubifs_cnode *cnode;
+
+	err = dbg_chk_lpt_sz(c, 0, 0);
+	if (err)
+		return err;
+	cnode = c->lpt_cnext;
+	if (!cnode)
+		return 0;
+	lnum = c->nhead_lnum;
+	offs = c->nhead_offs;
+	/* Try to place lsave and ltab nicely */
+	done_lsave = !c->big_lpt;
+	done_ltab = 0;
+	if (!done_lsave && offs + c->lsave_sz <= c->leb_size) {
+		done_lsave = 1;
+		c->lsave_lnum = lnum;
+		c->lsave_offs = offs;
+		offs += c->lsave_sz;
+		dbg_chk_lpt_sz(c, 1, c->lsave_sz);
+	}
+
+	if (offs + c->ltab_sz <= c->leb_size) {
+		done_ltab = 1;
+		c->ltab_lnum = lnum;
+		c->ltab_offs = offs;
+		offs += c->ltab_sz;
+		dbg_chk_lpt_sz(c, 1, c->ltab_sz);
+	}
+
+	do {
+		if (cnode->level) {
+			len = c->nnode_sz;
+			c->dirty_nn_cnt -= 1;
+		} else {
+			len = c->pnode_sz;
+			c->dirty_pn_cnt -= 1;
+		}
+		while (offs + len > c->leb_size) {
+			alen = ALIGN(offs, c->min_io_size);
+			upd_ltab(c, lnum, c->leb_size - alen, alen - offs);
+			dbg_chk_lpt_sz(c, 2, c->leb_size - offs);
+			err = alloc_lpt_leb(c, &lnum);
+			if (err)
+				goto no_space;
+			offs = 0;
+			ubifs_assert(lnum >= c->lpt_first &&
+				     lnum <= c->lpt_last);
+			/* Try to place lsave and ltab nicely */
+			if (!done_lsave) {
+				done_lsave = 1;
+				c->lsave_lnum = lnum;
+				c->lsave_offs = offs;
+				offs += c->lsave_sz;
+				dbg_chk_lpt_sz(c, 1, c->lsave_sz);
+				continue;
+			}
+			if (!done_ltab) {
+				done_ltab = 1;
+				c->ltab_lnum = lnum;
+				c->ltab_offs = offs;
+				offs += c->ltab_sz;
+				dbg_chk_lpt_sz(c, 1, c->ltab_sz);
+				continue;
+			}
+			break;
+		}
+		if (cnode->parent) {
+			cnode->parent->nbranch[cnode->iip].lnum = lnum;
+			cnode->parent->nbranch[cnode->iip].offs = offs;
+		} else {
+			c->lpt_lnum = lnum;
+			c->lpt_offs = offs;
+		}
+		offs += len;
+		dbg_chk_lpt_sz(c, 1, len);
+		cnode = cnode->cnext;
+	} while (cnode && cnode != c->lpt_cnext);
+
+	/* Make sure to place LPT's save table */
+	if (!done_lsave) {
+		if (offs + c->lsave_sz > c->leb_size) {
+			alen = ALIGN(offs, c->min_io_size);
+			upd_ltab(c, lnum, c->leb_size - alen, alen - offs);
+			dbg_chk_lpt_sz(c, 2, c->leb_size - offs);
+			err = alloc_lpt_leb(c, &lnum);
+			if (err)
+				goto no_space;
+			offs = 0;
+			ubifs_assert(lnum >= c->lpt_first &&
+				     lnum <= c->lpt_last);
+		}
+		done_lsave = 1;
+		c->lsave_lnum = lnum;
+		c->lsave_offs = offs;
+		offs += c->lsave_sz;
+		dbg_chk_lpt_sz(c, 1, c->lsave_sz);
+	}
+
+	/* Make sure to place LPT's own lprops table */
+	if (!done_ltab) {
+		if (offs + c->ltab_sz > c->leb_size) {
+			alen = ALIGN(offs, c->min_io_size);
+			upd_ltab(c, lnum, c->leb_size - alen, alen - offs);
+			dbg_chk_lpt_sz(c, 2, c->leb_size - offs);
+			err = alloc_lpt_leb(c, &lnum);
+			if (err)
+				goto no_space;
+			offs = 0;
+			ubifs_assert(lnum >= c->lpt_first &&
+				     lnum <= c->lpt_last);
+		}
+		done_ltab = 1;
+		c->ltab_lnum = lnum;
+		c->ltab_offs = offs;
+		offs += c->ltab_sz;
+		dbg_chk_lpt_sz(c, 1, c->ltab_sz);
+	}
+
+	alen = ALIGN(offs, c->min_io_size);
+	upd_ltab(c, lnum, c->leb_size - alen, alen - offs);
+	dbg_chk_lpt_sz(c, 4, alen - offs);
+	err = dbg_chk_lpt_sz(c, 3, alen);
+	if (err)
+		return err;
+	return 0;
+
+no_space:
+	ubifs_err("LPT out of space at LEB %d:%d needing %d, done_ltab %d, done_lsave %d",
+		  lnum, offs, len, done_ltab, done_lsave);
+	ubifs_dump_lpt_info(c);
+	ubifs_dump_lpt_lebs(c);
+	dump_stack();
+	return err;
+}
+
+#ifndef __UBOOT__
+/**
+ * realloc_lpt_leb - allocate an LPT LEB that is empty.
+ * @c: UBIFS file-system description object
+ * @lnum: LEB number is passed and returned here
+ *
+ * This function duplicates exactly the results of the function alloc_lpt_leb.
+ * It is used during end commit to reallocate the same LEB numbers that were
+ * allocated by alloc_lpt_leb during start commit.
+ *
+ * This function finds the next LEB that was allocated by the alloc_lpt_leb
+ * function starting from @lnum. If a LEB is found it is returned in @lnum and
+ * the function returns %0. Otherwise the function returns -ENOSPC.
+ * Note however, that LPT is designed never to run out of space.
+ */
+static int realloc_lpt_leb(struct ubifs_info *c, int *lnum)
+{
+	int i, n;
+
+	n = *lnum - c->lpt_first + 1;
+	for (i = n; i < c->lpt_lebs; i++)
+		if (c->ltab[i].cmt) {
+			c->ltab[i].cmt = 0;
+			*lnum = i + c->lpt_first;
+			return 0;
+		}
+
+	for (i = 0; i < n; i++)
+		if (c->ltab[i].cmt) {
+			c->ltab[i].cmt = 0;
+			*lnum = i + c->lpt_first;
+			return 0;
+		}
+	return -ENOSPC;
+}
+
+/**
+ * write_cnodes - write cnodes for commit.
+ * @c: UBIFS file-system description object
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int write_cnodes(struct ubifs_info *c)
+{
+	int lnum, offs, len, from, err, wlen, alen, done_ltab, done_lsave;
+	struct ubifs_cnode *cnode;
+	void *buf = c->lpt_buf;
+
+	cnode = c->lpt_cnext;
+	if (!cnode)
+		return 0;
+	lnum = c->nhead_lnum;
+	offs = c->nhead_offs;
+	from = offs;
+	/* Ensure empty LEB is unmapped */
+	if (offs == 0) {
+		err = ubifs_leb_unmap(c, lnum);
+		if (err)
+			return err;
+	}
+	/* Try to place lsave and ltab nicely */
+	done_lsave = !c->big_lpt;
+	done_ltab = 0;
+	if (!done_lsave && offs + c->lsave_sz <= c->leb_size) {
+		done_lsave = 1;
+		ubifs_pack_lsave(c, buf + offs, c->lsave);
+		offs += c->lsave_sz;
+		dbg_chk_lpt_sz(c, 1, c->lsave_sz);
+	}
+
+	if (offs + c->ltab_sz <= c->leb_size) {
+		done_ltab = 1;
+		ubifs_pack_ltab(c, buf + offs, c->ltab_cmt);
+		offs += c->ltab_sz;
+		dbg_chk_lpt_sz(c, 1, c->ltab_sz);
+	}
+
+	/* Loop for each cnode */
+	do {
+		if (cnode->level)
+			len = c->nnode_sz;
+		else
+			len = c->pnode_sz;
+		while (offs + len > c->leb_size) {
+			wlen = offs - from;
+			if (wlen) {
+				alen = ALIGN(wlen, c->min_io_size);
+				memset(buf + offs, 0xff, alen - wlen);
+				err = ubifs_leb_write(c, lnum, buf + from, from,
+						       alen);
+				if (err)
+					return err;
+			}
+			dbg_chk_lpt_sz(c, 2, c->leb_size - offs);
+			err = realloc_lpt_leb(c, &lnum);
+			if (err)
+				goto no_space;
+			offs = from = 0;
+			ubifs_assert(lnum >= c->lpt_first &&
+				     lnum <= c->lpt_last);
+			err = ubifs_leb_unmap(c, lnum);
+			if (err)
+				return err;
+			/* Try to place lsave and ltab nicely */
+			if (!done_lsave) {
+				done_lsave = 1;
+				ubifs_pack_lsave(c, buf + offs, c->lsave);
+				offs += c->lsave_sz;
+				dbg_chk_lpt_sz(c, 1, c->lsave_sz);
+				continue;
+			}
+			if (!done_ltab) {
+				done_ltab = 1;
+				ubifs_pack_ltab(c, buf + offs, c->ltab_cmt);
+				offs += c->ltab_sz;
+				dbg_chk_lpt_sz(c, 1, c->ltab_sz);
+				continue;
+			}
+			break;
+		}
+		if (cnode->level)
+			ubifs_pack_nnode(c, buf + offs,
+					 (struct ubifs_nnode *)cnode);
+		else
+			ubifs_pack_pnode(c, buf + offs,
+					 (struct ubifs_pnode *)cnode);
+		/*
+		 * The reason for the barriers is the same as in case of TNC.
+		 * See comment in 'write_index()'. 'dirty_cow_nnode()' and
+		 * 'dirty_cow_pnode()' are the functions for which this is
+		 * important.
+		 */
+		clear_bit(DIRTY_CNODE, &cnode->flags);
+		smp_mb__before_clear_bit();
+		clear_bit(COW_CNODE, &cnode->flags);
+		smp_mb__after_clear_bit();
+		offs += len;
+		dbg_chk_lpt_sz(c, 1, len);
+		cnode = cnode->cnext;
+	} while (cnode && cnode != c->lpt_cnext);
+
+	/* Make sure to place LPT's save table */
+	if (!done_lsave) {
+		if (offs + c->lsave_sz > c->leb_size) {
+			wlen = offs - from;
+			alen = ALIGN(wlen, c->min_io_size);
+			memset(buf + offs, 0xff, alen - wlen);
+			err = ubifs_leb_write(c, lnum, buf + from, from, alen);
+			if (err)
+				return err;
+			dbg_chk_lpt_sz(c, 2, c->leb_size - offs);
+			err = realloc_lpt_leb(c, &lnum);
+			if (err)
+				goto no_space;
+			offs = from = 0;
+			ubifs_assert(lnum >= c->lpt_first &&
+				     lnum <= c->lpt_last);
+			err = ubifs_leb_unmap(c, lnum);
+			if (err)
+				return err;
+		}
+		done_lsave = 1;
+		ubifs_pack_lsave(c, buf + offs, c->lsave);
+		offs += c->lsave_sz;
+		dbg_chk_lpt_sz(c, 1, c->lsave_sz);
+	}
+
+	/* Make sure to place LPT's own lprops table */
+	if (!done_ltab) {
+		if (offs + c->ltab_sz > c->leb_size) {
+			wlen = offs - from;
+			alen = ALIGN(wlen, c->min_io_size);
+			memset(buf + offs, 0xff, alen - wlen);
+			err = ubifs_leb_write(c, lnum, buf + from, from, alen);
+			if (err)
+				return err;
+			dbg_chk_lpt_sz(c, 2, c->leb_size - offs);
+			err = realloc_lpt_leb(c, &lnum);
+			if (err)
+				goto no_space;
+			offs = from = 0;
+			ubifs_assert(lnum >= c->lpt_first &&
+				     lnum <= c->lpt_last);
+			err = ubifs_leb_unmap(c, lnum);
+			if (err)
+				return err;
+		}
+		done_ltab = 1;
+		ubifs_pack_ltab(c, buf + offs, c->ltab_cmt);
+		offs += c->ltab_sz;
+		dbg_chk_lpt_sz(c, 1, c->ltab_sz);
+	}
+
+	/* Write remaining data in buffer */
+	wlen = offs - from;
+	alen = ALIGN(wlen, c->min_io_size);
+	memset(buf + offs, 0xff, alen - wlen);
+	err = ubifs_leb_write(c, lnum, buf + from, from, alen);
+	if (err)
+		return err;
+
+	dbg_chk_lpt_sz(c, 4, alen - wlen);
+	err = dbg_chk_lpt_sz(c, 3, ALIGN(offs, c->min_io_size));
+	if (err)
+		return err;
+
+	c->nhead_lnum = lnum;
+	c->nhead_offs = ALIGN(offs, c->min_io_size);
+
+	dbg_lp("LPT root is at %d:%d", c->lpt_lnum, c->lpt_offs);
+	dbg_lp("LPT head is at %d:%d", c->nhead_lnum, c->nhead_offs);
+	dbg_lp("LPT ltab is at %d:%d", c->ltab_lnum, c->ltab_offs);
+	if (c->big_lpt)
+		dbg_lp("LPT lsave is at %d:%d", c->lsave_lnum, c->lsave_offs);
+
+	return 0;
+
+no_space:
+	ubifs_err("LPT out of space mismatch at LEB %d:%d needing %d, done_ltab %d, done_lsave %d",
+		  lnum, offs, len, done_ltab, done_lsave);
+	ubifs_dump_lpt_info(c);
+	ubifs_dump_lpt_lebs(c);
+	dump_stack();
+	return err;
+}
+#endif
+
+/**
+ * next_pnode_to_dirty - find next pnode to dirty.
+ * @c: UBIFS file-system description object
+ * @pnode: pnode
+ *
+ * This function returns the next pnode to dirty or %NULL if there are no more
+ * pnodes.  Note that pnodes that have never been written (lnum == 0) are
+ * skipped.
+ */
+static struct ubifs_pnode *next_pnode_to_dirty(struct ubifs_info *c,
+					       struct ubifs_pnode *pnode)
+{
+	struct ubifs_nnode *nnode;
+	int iip;
+
+	/* Try to go right */
+	nnode = pnode->parent;
+	for (iip = pnode->iip + 1; iip < UBIFS_LPT_FANOUT; iip++) {
+		if (nnode->nbranch[iip].lnum)
+			return ubifs_get_pnode(c, nnode, iip);
+	}
+
+	/* Go up while can't go right */
+	do {
+		iip = nnode->iip + 1;
+		nnode = nnode->parent;
+		if (!nnode)
+			return NULL;
+		for (; iip < UBIFS_LPT_FANOUT; iip++) {
+			if (nnode->nbranch[iip].lnum)
+				break;
+		}
+	} while (iip >= UBIFS_LPT_FANOUT);
+
+	/* Go right */
+	nnode = ubifs_get_nnode(c, nnode, iip);
+	if (IS_ERR(nnode))
+		return (void *)nnode;
+
+	/* Go down to level 1 */
+	while (nnode->level > 1) {
+		for (iip = 0; iip < UBIFS_LPT_FANOUT; iip++) {
+			if (nnode->nbranch[iip].lnum)
+				break;
+		}
+		if (iip >= UBIFS_LPT_FANOUT) {
+			/*
+			 * Should not happen, but we need to keep going
+			 * if it does.
+			 */
+			iip = 0;
+		}
+		nnode = ubifs_get_nnode(c, nnode, iip);
+		if (IS_ERR(nnode))
+			return (void *)nnode;
+	}
+
+	for (iip = 0; iip < UBIFS_LPT_FANOUT; iip++)
+		if (nnode->nbranch[iip].lnum)
+			break;
+	if (iip >= UBIFS_LPT_FANOUT)
+		/* Should not happen, but we need to keep going if it does */
+		iip = 0;
+	return ubifs_get_pnode(c, nnode, iip);
+}
+
+/**
+ * pnode_lookup - lookup a pnode in the LPT.
+ * @c: UBIFS file-system description object
+ * @i: pnode number (0 to main_lebs - 1)
+ *
+ * This function returns a pointer to the pnode on success or a negative
+ * error code on failure.
+ */
+static struct ubifs_pnode *pnode_lookup(struct ubifs_info *c, int i)
+{
+	int err, h, iip, shft;
+	struct ubifs_nnode *nnode;
+
+	if (!c->nroot) {
+		err = ubifs_read_nnode(c, NULL, 0);
+		if (err)
+			return ERR_PTR(err);
+	}
+	i <<= UBIFS_LPT_FANOUT_SHIFT;
+	nnode = c->nroot;
+	shft = c->lpt_hght * UBIFS_LPT_FANOUT_SHIFT;
+	for (h = 1; h < c->lpt_hght; h++) {
+		iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
+		shft -= UBIFS_LPT_FANOUT_SHIFT;
+		nnode = ubifs_get_nnode(c, nnode, iip);
+		if (IS_ERR(nnode))
+			return ERR_CAST(nnode);
+	}
+	iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
+	return ubifs_get_pnode(c, nnode, iip);
+}
+
+/**
+ * add_pnode_dirt - add dirty space to LPT LEB properties.
+ * @c: UBIFS file-system description object
+ * @pnode: pnode for which to add dirt
+ */
+static void add_pnode_dirt(struct ubifs_info *c, struct ubifs_pnode *pnode)
+{
+	ubifs_add_lpt_dirt(c, pnode->parent->nbranch[pnode->iip].lnum,
+			   c->pnode_sz);
+}
+
+/**
+ * do_make_pnode_dirty - mark a pnode dirty.
+ * @c: UBIFS file-system description object
+ * @pnode: pnode to mark dirty
+ */
+static void do_make_pnode_dirty(struct ubifs_info *c, struct ubifs_pnode *pnode)
+{
+	/* Assumes cnext list is empty i.e. not called during commit */
+	if (!test_and_set_bit(DIRTY_CNODE, &pnode->flags)) {
+		struct ubifs_nnode *nnode;
+
+		c->dirty_pn_cnt += 1;
+		add_pnode_dirt(c, pnode);
+		/* Mark parent and ancestors dirty too */
+		nnode = pnode->parent;
+		while (nnode) {
+			if (!test_and_set_bit(DIRTY_CNODE, &nnode->flags)) {
+				c->dirty_nn_cnt += 1;
+				ubifs_add_nnode_dirt(c, nnode);
+				nnode = nnode->parent;
+			} else
+				break;
+		}
+	}
+}
+
+/**
+ * make_tree_dirty - mark the entire LEB properties tree dirty.
+ * @c: UBIFS file-system description object
+ *
+ * This function is used by the "small" LPT model to cause the entire LEB
+ * properties tree to be written.  The "small" LPT model does not use LPT
+ * garbage collection because it is more efficient to write the entire tree
+ * (because it is small).
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int make_tree_dirty(struct ubifs_info *c)
+{
+	struct ubifs_pnode *pnode;
+
+	pnode = pnode_lookup(c, 0);
+	if (IS_ERR(pnode))
+		return PTR_ERR(pnode);
+
+	while (pnode) {
+		do_make_pnode_dirty(c, pnode);
+		pnode = next_pnode_to_dirty(c, pnode);
+		if (IS_ERR(pnode))
+			return PTR_ERR(pnode);
+	}
+	return 0;
+}
+
+/**
+ * need_write_all - determine if the LPT area is running out of free space.
+ * @c: UBIFS file-system description object
+ *
+ * This function returns %1 if the LPT area is running out of free space and %0
+ * if it is not.
+ */
+static int need_write_all(struct ubifs_info *c)
+{
+	long long free = 0;
+	int i;
+
+	for (i = 0; i < c->lpt_lebs; i++) {
+		if (i + c->lpt_first == c->nhead_lnum)
+			free += c->leb_size - c->nhead_offs;
+		else if (c->ltab[i].free == c->leb_size)
+			free += c->leb_size;
+		else if (c->ltab[i].free + c->ltab[i].dirty == c->leb_size)
+			free += c->leb_size;
+	}
+	/* Less than twice the size left */
+	if (free <= c->lpt_sz * 2)
+		return 1;
+	return 0;
+}
+
+/**
+ * lpt_tgc_start - start trivial garbage collection of LPT LEBs.
+ * @c: UBIFS file-system description object
+ *
+ * LPT trivial garbage collection is where a LPT LEB contains only dirty and
+ * free space and so may be reused as soon as the next commit is completed.
+ * This function is called during start commit to mark LPT LEBs for trivial GC.
+ */
+static void lpt_tgc_start(struct ubifs_info *c)
+{
+	int i;
+
+	for (i = 0; i < c->lpt_lebs; i++) {
+		if (i + c->lpt_first == c->nhead_lnum)
+			continue;
+		if (c->ltab[i].dirty > 0 &&
+		    c->ltab[i].free + c->ltab[i].dirty == c->leb_size) {
+			c->ltab[i].tgc = 1;
+			c->ltab[i].free = c->leb_size;
+			c->ltab[i].dirty = 0;
+			dbg_lp("LEB %d", i + c->lpt_first);
+		}
+	}
+}
+
+/**
+ * lpt_tgc_end - end trivial garbage collection of LPT LEBs.
+ * @c: UBIFS file-system description object
+ *
+ * LPT trivial garbage collection is where a LPT LEB contains only dirty and
+ * free space and so may be reused as soon as the next commit is completed.
+ * This function is called after the commit is completed (master node has been
+ * written) and un-maps LPT LEBs that were marked for trivial GC.
+ */
+static int lpt_tgc_end(struct ubifs_info *c)
+{
+	int i, err;
+
+	for (i = 0; i < c->lpt_lebs; i++)
+		if (c->ltab[i].tgc) {
+			err = ubifs_leb_unmap(c, i + c->lpt_first);
+			if (err)
+				return err;
+			c->ltab[i].tgc = 0;
+			dbg_lp("LEB %d", i + c->lpt_first);
+		}
+	return 0;
+}
+
+/**
+ * populate_lsave - fill the lsave array with important LEB numbers.
+ * @c: the UBIFS file-system description object
+ *
+ * This function is only called for the "big" model. It records a small number
+ * of LEB numbers of important LEBs.  Important LEBs are ones that are (from
+ * most important to least important): empty, freeable, freeable index, dirty
+ * index, dirty or free. Upon mount, we read this list of LEB numbers and bring
+ * their pnodes into memory.  That will stop us from having to scan the LPT
+ * straight away. For the "small" model we assume that scanning the LPT is no
+ * big deal.
+ */
+static void populate_lsave(struct ubifs_info *c)
+{
+	struct ubifs_lprops *lprops;
+	struct ubifs_lpt_heap *heap;
+	int i, cnt = 0;
+
+	ubifs_assert(c->big_lpt);
+	if (!(c->lpt_drty_flgs & LSAVE_DIRTY)) {
+		c->lpt_drty_flgs |= LSAVE_DIRTY;
+		ubifs_add_lpt_dirt(c, c->lsave_lnum, c->lsave_sz);
+	}
+
+#ifndef __UBOOT__
+	if (dbg_populate_lsave(c))
+		return;
+#endif
+
+	list_for_each_entry(lprops, &c->empty_list, list) {
+		c->lsave[cnt++] = lprops->lnum;
+		if (cnt >= c->lsave_cnt)
+			return;
+	}
+	list_for_each_entry(lprops, &c->freeable_list, list) {
+		c->lsave[cnt++] = lprops->lnum;
+		if (cnt >= c->lsave_cnt)
+			return;
+	}
+	list_for_each_entry(lprops, &c->frdi_idx_list, list) {
+		c->lsave[cnt++] = lprops->lnum;
+		if (cnt >= c->lsave_cnt)
+			return;
+	}
+	heap = &c->lpt_heap[LPROPS_DIRTY_IDX - 1];
+	for (i = 0; i < heap->cnt; i++) {
+		c->lsave[cnt++] = heap->arr[i]->lnum;
+		if (cnt >= c->lsave_cnt)
+			return;
+	}
+	heap = &c->lpt_heap[LPROPS_DIRTY - 1];
+	for (i = 0; i < heap->cnt; i++) {
+		c->lsave[cnt++] = heap->arr[i]->lnum;
+		if (cnt >= c->lsave_cnt)
+			return;
+	}
+	heap = &c->lpt_heap[LPROPS_FREE - 1];
+	for (i = 0; i < heap->cnt; i++) {
+		c->lsave[cnt++] = heap->arr[i]->lnum;
+		if (cnt >= c->lsave_cnt)
+			return;
+	}
+	/* Fill it up completely */
+	while (cnt < c->lsave_cnt)
+		c->lsave[cnt++] = c->main_first;
+}
+
+/**
+ * nnode_lookup - lookup a nnode in the LPT.
+ * @c: UBIFS file-system description object
+ * @i: nnode number
+ *
+ * This function returns a pointer to the nnode on success or a negative
+ * error code on failure.
+ */
+static struct ubifs_nnode *nnode_lookup(struct ubifs_info *c, int i)
+{
+	int err, iip;
+	struct ubifs_nnode *nnode;
+
+	if (!c->nroot) {
+		err = ubifs_read_nnode(c, NULL, 0);
+		if (err)
+			return ERR_PTR(err);
+	}
+	nnode = c->nroot;
+	while (1) {
+		iip = i & (UBIFS_LPT_FANOUT - 1);
+		i >>= UBIFS_LPT_FANOUT_SHIFT;
+		if (!i)
+			break;
+		nnode = ubifs_get_nnode(c, nnode, iip);
+		if (IS_ERR(nnode))
+			return nnode;
+	}
+	return nnode;
+}
+
+/**
+ * make_nnode_dirty - find a nnode and, if found, make it dirty.
+ * @c: UBIFS file-system description object
+ * @node_num: nnode number of nnode to make dirty
+ * @lnum: LEB number where nnode was written
+ * @offs: offset where nnode was written
+ *
+ * This function is used by LPT garbage collection.  LPT garbage collection is
+ * used only for the "big" LPT model (c->big_lpt == 1).  Garbage collection
+ * simply involves marking all the nodes in the LEB being garbage-collected as
+ * dirty.  The dirty nodes are written next commit, after which the LEB is free
+ * to be reused.
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int make_nnode_dirty(struct ubifs_info *c, int node_num, int lnum,
+			    int offs)
+{
+	struct ubifs_nnode *nnode;
+
+	nnode = nnode_lookup(c, node_num);
+	if (IS_ERR(nnode))
+		return PTR_ERR(nnode);
+	if (nnode->parent) {
+		struct ubifs_nbranch *branch;
+
+		branch = &nnode->parent->nbranch[nnode->iip];
+		if (branch->lnum != lnum || branch->offs != offs)
+			return 0; /* nnode is obsolete */
+	} else if (c->lpt_lnum != lnum || c->lpt_offs != offs)
+			return 0; /* nnode is obsolete */
+	/* Assumes cnext list is empty i.e. not called during commit */
+	if (!test_and_set_bit(DIRTY_CNODE, &nnode->flags)) {
+		c->dirty_nn_cnt += 1;
+		ubifs_add_nnode_dirt(c, nnode);
+		/* Mark parent and ancestors dirty too */
+		nnode = nnode->parent;
+		while (nnode) {
+			if (!test_and_set_bit(DIRTY_CNODE, &nnode->flags)) {
+				c->dirty_nn_cnt += 1;
+				ubifs_add_nnode_dirt(c, nnode);
+				nnode = nnode->parent;
+			} else
+				break;
+		}
+	}
+	return 0;
+}
+
+/**
+ * make_pnode_dirty - find a pnode and, if found, make it dirty.
+ * @c: UBIFS file-system description object
+ * @node_num: pnode number of pnode to make dirty
+ * @lnum: LEB number where pnode was written
+ * @offs: offset where pnode was written
+ *
+ * This function is used by LPT garbage collection.  LPT garbage collection is
+ * used only for the "big" LPT model (c->big_lpt == 1).  Garbage collection
+ * simply involves marking all the nodes in the LEB being garbage-collected as
+ * dirty.  The dirty nodes are written next commit, after which the LEB is free
+ * to be reused.
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int make_pnode_dirty(struct ubifs_info *c, int node_num, int lnum,
+			    int offs)
+{
+	struct ubifs_pnode *pnode;
+	struct ubifs_nbranch *branch;
+
+	pnode = pnode_lookup(c, node_num);
+	if (IS_ERR(pnode))
+		return PTR_ERR(pnode);
+	branch = &pnode->parent->nbranch[pnode->iip];
+	if (branch->lnum != lnum || branch->offs != offs)
+		return 0;
+	do_make_pnode_dirty(c, pnode);
+	return 0;
+}
+
+/**
+ * make_ltab_dirty - make ltab node dirty.
+ * @c: UBIFS file-system description object
+ * @lnum: LEB number where ltab was written
+ * @offs: offset where ltab was written
+ *
+ * This function is used by LPT garbage collection.  LPT garbage collection is
+ * used only for the "big" LPT model (c->big_lpt == 1).  Garbage collection
+ * simply involves marking all the nodes in the LEB being garbage-collected as
+ * dirty.  The dirty nodes are written next commit, after which the LEB is free
+ * to be reused.
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int make_ltab_dirty(struct ubifs_info *c, int lnum, int offs)
+{
+	if (lnum != c->ltab_lnum || offs != c->ltab_offs)
+		return 0; /* This ltab node is obsolete */
+	if (!(c->lpt_drty_flgs & LTAB_DIRTY)) {
+		c->lpt_drty_flgs |= LTAB_DIRTY;
+		ubifs_add_lpt_dirt(c, c->ltab_lnum, c->ltab_sz);
+	}
+	return 0;
+}
+
+/**
+ * make_lsave_dirty - make lsave node dirty.
+ * @c: UBIFS file-system description object
+ * @lnum: LEB number where lsave was written
+ * @offs: offset where lsave was written
+ *
+ * This function is used by LPT garbage collection.  LPT garbage collection is
+ * used only for the "big" LPT model (c->big_lpt == 1).  Garbage collection
+ * simply involves marking all the nodes in the LEB being garbage-collected as
+ * dirty.  The dirty nodes are written next commit, after which the LEB is free
+ * to be reused.
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int make_lsave_dirty(struct ubifs_info *c, int lnum, int offs)
+{
+	if (lnum != c->lsave_lnum || offs != c->lsave_offs)
+		return 0; /* This lsave node is obsolete */
+	if (!(c->lpt_drty_flgs & LSAVE_DIRTY)) {
+		c->lpt_drty_flgs |= LSAVE_DIRTY;
+		ubifs_add_lpt_dirt(c, c->lsave_lnum, c->lsave_sz);
+	}
+	return 0;
+}
+
+/**
+ * make_node_dirty - make node dirty.
+ * @c: UBIFS file-system description object
+ * @node_type: LPT node type
+ * @node_num: node number
+ * @lnum: LEB number where node was written
+ * @offs: offset where node was written
+ *
+ * This function is used by LPT garbage collection.  LPT garbage collection is
+ * used only for the "big" LPT model (c->big_lpt == 1).  Garbage collection
+ * simply involves marking all the nodes in the LEB being garbage-collected as
+ * dirty.  The dirty nodes are written next commit, after which the LEB is free
+ * to be reused.
  *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int make_node_dirty(struct ubifs_info *c, int node_type, int node_num,
+			   int lnum, int offs)
+{
+	switch (node_type) {
+	case UBIFS_LPT_NNODE:
+		return make_nnode_dirty(c, node_num, lnum, offs);
+	case UBIFS_LPT_PNODE:
+		return make_pnode_dirty(c, node_num, lnum, offs);
+	case UBIFS_LPT_LTAB:
+		return make_ltab_dirty(c, lnum, offs);
+	case UBIFS_LPT_LSAVE:
+		return make_lsave_dirty(c, lnum, offs);
+	}
+	return -EINVAL;
+}
+
+/**
+ * get_lpt_node_len - return the length of a node based on its type.
+ * @c: UBIFS file-system description object
+ * @node_type: LPT node type
+ */
+static int get_lpt_node_len(const struct ubifs_info *c, int node_type)
+{
+	switch (node_type) {
+	case UBIFS_LPT_NNODE:
+		return c->nnode_sz;
+	case UBIFS_LPT_PNODE:
+		return c->pnode_sz;
+	case UBIFS_LPT_LTAB:
+		return c->ltab_sz;
+	case UBIFS_LPT_LSAVE:
+		return c->lsave_sz;
+	}
+	return 0;
+}
+
+/**
+ * get_pad_len - return the length of padding in a buffer.
+ * @c: UBIFS file-system description object
+ * @buf: buffer
+ * @len: length of buffer
+ */
+static int get_pad_len(const struct ubifs_info *c, uint8_t *buf, int len)
+{
+	int offs, pad_len;
+
+	if (c->min_io_size == 1)
+		return 0;
+	offs = c->leb_size - len;
+	pad_len = ALIGN(offs, c->min_io_size) - offs;
+	return pad_len;
+}
+
+/**
+ * get_lpt_node_type - return type (and node number) of a node in a buffer.
+ * @c: UBIFS file-system description object
+ * @buf: buffer
+ * @node_num: node number is returned here
+ */
+static int get_lpt_node_type(const struct ubifs_info *c, uint8_t *buf,
+			     int *node_num)
+{
+	uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES;
+	int pos = 0, node_type;
+
+	node_type = ubifs_unpack_bits(&addr, &pos, UBIFS_LPT_TYPE_BITS);
+	*node_num = ubifs_unpack_bits(&addr, &pos, c->pcnt_bits);
+	return node_type;
+}
+
+/**
+ * is_a_node - determine if a buffer contains a node.
+ * @c: UBIFS file-system description object
+ * @buf: buffer
+ * @len: length of buffer
  *
- * Authors: Adrian Hunter
- *          Artem Bityutskiy (Битюцкий Артём)
+ * This function returns %1 if the buffer contains a node or %0 if it does not.
  */
+static int is_a_node(const struct ubifs_info *c, uint8_t *buf, int len)
+{
+	uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES;
+	int pos = 0, node_type, node_len;
+	uint16_t crc, calc_crc;
 
-/*
- * This file implements commit-related functionality of the LEB properties
- * subsystem.
+	if (len < UBIFS_LPT_CRC_BYTES + (UBIFS_LPT_TYPE_BITS + 7) / 8)
+		return 0;
+	node_type = ubifs_unpack_bits(&addr, &pos, UBIFS_LPT_TYPE_BITS);
+	if (node_type == UBIFS_LPT_NOT_A_NODE)
+		return 0;
+	node_len = get_lpt_node_len(c, node_type);
+	if (!node_len || node_len > len)
+		return 0;
+	pos = 0;
+	addr = buf;
+	crc = ubifs_unpack_bits(&addr, &pos, UBIFS_LPT_CRC_BITS);
+	calc_crc = crc16(-1, buf + UBIFS_LPT_CRC_BYTES,
+			 node_len - UBIFS_LPT_CRC_BYTES);
+	if (crc != calc_crc)
+		return 0;
+	return 1;
+}
+
+/**
+ * lpt_gc_lnum - garbage collect a LPT LEB.
+ * @c: UBIFS file-system description object
+ * @lnum: LEB number to garbage collect
+ *
+ * LPT garbage collection is used only for the "big" LPT model
+ * (c->big_lpt == 1).  Garbage collection simply involves marking all the nodes
+ * in the LEB being garbage-collected as dirty.  The dirty nodes are written
+ * next commit, after which the LEB is free to be reused.
+ *
+ * This function returns %0 on success and a negative error code on failure.
  */
+static int lpt_gc_lnum(struct ubifs_info *c, int lnum)
+{
+	int err, len = c->leb_size, node_type, node_num, node_len, offs;
+	void *buf = c->lpt_buf;
 
-#include "crc16.h"
-#include "ubifs.h"
+	dbg_lp("LEB %d", lnum);
+
+	err = ubifs_leb_read(c, lnum, buf, 0, c->leb_size, 1);
+	if (err)
+		return err;
+
+	while (1) {
+		if (!is_a_node(c, buf, len)) {
+			int pad_len;
+
+			pad_len = get_pad_len(c, buf, len);
+			if (pad_len) {
+				buf += pad_len;
+				len -= pad_len;
+				continue;
+			}
+			return 0;
+		}
+		node_type = get_lpt_node_type(c, buf, &node_num);
+		node_len = get_lpt_node_len(c, node_type);
+		offs = c->leb_size - len;
+		ubifs_assert(node_len != 0);
+		mutex_lock(&c->lp_mutex);
+		err = make_node_dirty(c, node_type, node_num, lnum, offs);
+		mutex_unlock(&c->lp_mutex);
+		if (err)
+			return err;
+		buf += node_len;
+		len -= node_len;
+	}
+	return 0;
+}
+
+/**
+ * lpt_gc - LPT garbage collection.
+ * @c: UBIFS file-system description object
+ *
+ * Select a LPT LEB for LPT garbage collection and call 'lpt_gc_lnum()'.
+ * Returns %0 on success and a negative error code on failure.
+ */
+static int lpt_gc(struct ubifs_info *c)
+{
+	int i, lnum = -1, dirty = 0;
+
+	mutex_lock(&c->lp_mutex);
+	for (i = 0; i < c->lpt_lebs; i++) {
+		ubifs_assert(!c->ltab[i].tgc);
+		if (i + c->lpt_first == c->nhead_lnum ||
+		    c->ltab[i].free + c->ltab[i].dirty == c->leb_size)
+			continue;
+		if (c->ltab[i].dirty > dirty) {
+			dirty = c->ltab[i].dirty;
+			lnum = i + c->lpt_first;
+		}
+	}
+	mutex_unlock(&c->lp_mutex);
+	if (lnum == -1)
+		return -ENOSPC;
+	return lpt_gc_lnum(c, lnum);
+}
+
+/**
+ * ubifs_lpt_start_commit - UBIFS commit starts.
+ * @c: the UBIFS file-system description object
+ *
+ * This function has to be called when UBIFS starts the commit operation.
+ * This function "freezes" all currently dirty LEB properties and does not
+ * change them anymore. Further changes are saved and tracked separately
+ * because they are not part of this commit. This function returns zero in case
+ * of success and a negative error code in case of failure.
+ */
+int ubifs_lpt_start_commit(struct ubifs_info *c)
+{
+	int err, cnt;
+
+	dbg_lp("");
+
+	mutex_lock(&c->lp_mutex);
+	err = dbg_chk_lpt_free_spc(c);
+	if (err)
+		goto out;
+	err = dbg_check_ltab(c);
+	if (err)
+		goto out;
+
+	if (c->check_lpt_free) {
+		/*
+		 * We ensure there is enough free space in
+		 * ubifs_lpt_post_commit() by marking nodes dirty. That
+		 * information is lost when we unmount, so we also need
+		 * to check free space once after mounting also.
+		 */
+		c->check_lpt_free = 0;
+		while (need_write_all(c)) {
+			mutex_unlock(&c->lp_mutex);
+			err = lpt_gc(c);
+			if (err)
+				return err;
+			mutex_lock(&c->lp_mutex);
+		}
+	}
+
+	lpt_tgc_start(c);
+
+	if (!c->dirty_pn_cnt) {
+		dbg_cmt("no cnodes to commit");
+		err = 0;
+		goto out;
+	}
+
+	if (!c->big_lpt && need_write_all(c)) {
+		/* If needed, write everything */
+		err = make_tree_dirty(c);
+		if (err)
+			goto out;
+		lpt_tgc_start(c);
+	}
+
+	if (c->big_lpt)
+		populate_lsave(c);
+
+	cnt = get_cnodes_to_commit(c);
+	ubifs_assert(cnt != 0);
+
+	err = layout_cnodes(c);
+	if (err)
+		goto out;
+
+	/* Copy the LPT's own lprops for end commit to write */
+	memcpy(c->ltab_cmt, c->ltab,
+	       sizeof(struct ubifs_lpt_lprops) * c->lpt_lebs);
+	c->lpt_drty_flgs &= ~(LTAB_DIRTY | LSAVE_DIRTY);
+
+out:
+	mutex_unlock(&c->lp_mutex);
+	return err;
+}
 
 /**
  * free_obsolete_cnodes - free obsolete cnodes for commit end.
@@ -50,6 +1314,65 @@ static void free_obsolete_cnodes(struct ubifs_info *c)
 	c->lpt_cnext = NULL;
 }
 
+#ifndef __UBOOT__
+/**
+ * ubifs_lpt_end_commit - finish the commit operation.
+ * @c: the UBIFS file-system description object
+ *
+ * This function has to be called when the commit operation finishes. It
+ * flushes the changes which were "frozen" by 'ubifs_lprops_start_commit()' to
+ * the media. Returns zero in case of success and a negative error code in case
+ * of failure.
+ */
+int ubifs_lpt_end_commit(struct ubifs_info *c)
+{
+	int err;
+
+	dbg_lp("");
+
+	if (!c->lpt_cnext)
+		return 0;
+
+	err = write_cnodes(c);
+	if (err)
+		return err;
+
+	mutex_lock(&c->lp_mutex);
+	free_obsolete_cnodes(c);
+	mutex_unlock(&c->lp_mutex);
+
+	return 0;
+}
+#endif
+
+/**
+ * ubifs_lpt_post_commit - post commit LPT trivial GC and LPT GC.
+ * @c: UBIFS file-system description object
+ *
+ * LPT trivial GC is completed after a commit. Also LPT GC is done after a
+ * commit for the "big" LPT model.
+ */
+int ubifs_lpt_post_commit(struct ubifs_info *c)
+{
+	int err;
+
+	mutex_lock(&c->lp_mutex);
+	err = lpt_tgc_end(c);
+	if (err)
+		goto out;
+	if (c->big_lpt)
+		while (need_write_all(c)) {
+			mutex_unlock(&c->lp_mutex);
+			err = lpt_gc(c);
+			if (err)
+				return err;
+			mutex_lock(&c->lp_mutex);
+		}
+out:
+	mutex_unlock(&c->lp_mutex);
+	return err;
+}
+
 /**
  * first_nnode - find the first nnode in memory.
  * @c: UBIFS file-system description object
@@ -169,3 +1492,549 @@ void ubifs_lpt_free(struct ubifs_info *c, int wr_only)
 	vfree(c->ltab);
 	kfree(c->lpt_nod_buf);
 }
+
+#ifndef __UBOOT__
+/*
+ * Everything below is related to debugging.
+ */
+
+/**
+ * dbg_is_all_ff - determine if a buffer contains only 0xFF bytes.
+ * @buf: buffer
+ * @len: buffer length
+ */
+static int dbg_is_all_ff(uint8_t *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		if (buf[i] != 0xff)
+			return 0;
+	return 1;
+}
+
+/**
+ * dbg_is_nnode_dirty - determine if a nnode is dirty.
+ * @c: the UBIFS file-system description object
+ * @lnum: LEB number where nnode was written
+ * @offs: offset where nnode was written
+ */
+static int dbg_is_nnode_dirty(struct ubifs_info *c, int lnum, int offs)
+{
+	struct ubifs_nnode *nnode;
+	int hght;
+
+	/* Entire tree is in memory so first_nnode / next_nnode are OK */
+	nnode = first_nnode(c, &hght);
+	for (; nnode; nnode = next_nnode(c, nnode, &hght)) {
+		struct ubifs_nbranch *branch;
+
+		cond_resched();
+		if (nnode->parent) {
+			branch = &nnode->parent->nbranch[nnode->iip];
+			if (branch->lnum != lnum || branch->offs != offs)
+				continue;
+			if (test_bit(DIRTY_CNODE, &nnode->flags))
+				return 1;
+			return 0;
+		} else {
+			if (c->lpt_lnum != lnum || c->lpt_offs != offs)
+				continue;
+			if (test_bit(DIRTY_CNODE, &nnode->flags))
+				return 1;
+			return 0;
+		}
+	}
+	return 1;
+}
+
+/**
+ * dbg_is_pnode_dirty - determine if a pnode is dirty.
+ * @c: the UBIFS file-system description object
+ * @lnum: LEB number where pnode was written
+ * @offs: offset where pnode was written
+ */
+static int dbg_is_pnode_dirty(struct ubifs_info *c, int lnum, int offs)
+{
+	int i, cnt;
+
+	cnt = DIV_ROUND_UP(c->main_lebs, UBIFS_LPT_FANOUT);
+	for (i = 0; i < cnt; i++) {
+		struct ubifs_pnode *pnode;
+		struct ubifs_nbranch *branch;
+
+		cond_resched();
+		pnode = pnode_lookup(c, i);
+		if (IS_ERR(pnode))
+			return PTR_ERR(pnode);
+		branch = &pnode->parent->nbranch[pnode->iip];
+		if (branch->lnum != lnum || branch->offs != offs)
+			continue;
+		if (test_bit(DIRTY_CNODE, &pnode->flags))
+			return 1;
+		return 0;
+	}
+	return 1;
+}
+
+/**
+ * dbg_is_ltab_dirty - determine if a ltab node is dirty.
+ * @c: the UBIFS file-system description object
+ * @lnum: LEB number where ltab node was written
+ * @offs: offset where ltab node was written
+ */
+static int dbg_is_ltab_dirty(struct ubifs_info *c, int lnum, int offs)
+{
+	if (lnum != c->ltab_lnum || offs != c->ltab_offs)
+		return 1;
+	return (c->lpt_drty_flgs & LTAB_DIRTY) != 0;
+}
+
+/**
+ * dbg_is_lsave_dirty - determine if a lsave node is dirty.
+ * @c: the UBIFS file-system description object
+ * @lnum: LEB number where lsave node was written
+ * @offs: offset where lsave node was written
+ */
+static int dbg_is_lsave_dirty(struct ubifs_info *c, int lnum, int offs)
+{
+	if (lnum != c->lsave_lnum || offs != c->lsave_offs)
+		return 1;
+	return (c->lpt_drty_flgs & LSAVE_DIRTY) != 0;
+}
+
+/**
+ * dbg_is_node_dirty - determine if a node is dirty.
+ * @c: the UBIFS file-system description object
+ * @node_type: node type
+ * @lnum: LEB number where node was written
+ * @offs: offset where node was written
+ */
+static int dbg_is_node_dirty(struct ubifs_info *c, int node_type, int lnum,
+			     int offs)
+{
+	switch (node_type) {
+	case UBIFS_LPT_NNODE:
+		return dbg_is_nnode_dirty(c, lnum, offs);
+	case UBIFS_LPT_PNODE:
+		return dbg_is_pnode_dirty(c, lnum, offs);
+	case UBIFS_LPT_LTAB:
+		return dbg_is_ltab_dirty(c, lnum, offs);
+	case UBIFS_LPT_LSAVE:
+		return dbg_is_lsave_dirty(c, lnum, offs);
+	}
+	return 1;
+}
+
+/**
+ * dbg_check_ltab_lnum - check the ltab for a LPT LEB number.
+ * @c: the UBIFS file-system description object
+ * @lnum: LEB number where node was written
+ * @offs: offset where node was written
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int dbg_check_ltab_lnum(struct ubifs_info *c, int lnum)
+{
+	int err, len = c->leb_size, dirty = 0, node_type, node_num, node_len;
+	int ret;
+	void *buf, *p;
+
+	if (!dbg_is_chk_lprops(c))
+		return 0;
+
+	buf = p = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
+	if (!buf) {
+		ubifs_err("cannot allocate memory for ltab checking");
+		return 0;
+	}
+
+	dbg_lp("LEB %d", lnum);
+
+	err = ubifs_leb_read(c, lnum, buf, 0, c->leb_size, 1);
+	if (err)
+		goto out;
+
+	while (1) {
+		if (!is_a_node(c, p, len)) {
+			int i, pad_len;
+
+			pad_len = get_pad_len(c, p, len);
+			if (pad_len) {
+				p += pad_len;
+				len -= pad_len;
+				dirty += pad_len;
+				continue;
+			}
+			if (!dbg_is_all_ff(p, len)) {
+				ubifs_err("invalid empty space in LEB %d at %d",
+					  lnum, c->leb_size - len);
+				err = -EINVAL;
+			}
+			i = lnum - c->lpt_first;
+			if (len != c->ltab[i].free) {
+				ubifs_err("invalid free space in LEB %d (free %d, expected %d)",
+					  lnum, len, c->ltab[i].free);
+				err = -EINVAL;
+			}
+			if (dirty != c->ltab[i].dirty) {
+				ubifs_err("invalid dirty space in LEB %d (dirty %d, expected %d)",
+					  lnum, dirty, c->ltab[i].dirty);
+				err = -EINVAL;
+			}
+			goto out;
+		}
+		node_type = get_lpt_node_type(c, p, &node_num);
+		node_len = get_lpt_node_len(c, node_type);
+		ret = dbg_is_node_dirty(c, node_type, lnum, c->leb_size - len);
+		if (ret == 1)
+			dirty += node_len;
+		p += node_len;
+		len -= node_len;
+	}
+
+	err = 0;
+out:
+	vfree(buf);
+	return err;
+}
+
+/**
+ * dbg_check_ltab - check the free and dirty space in the ltab.
+ * @c: the UBIFS file-system description object
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+int dbg_check_ltab(struct ubifs_info *c)
+{
+	int lnum, err, i, cnt;
+
+	if (!dbg_is_chk_lprops(c))
+		return 0;
+
+	/* Bring the entire tree into memory */
+	cnt = DIV_ROUND_UP(c->main_lebs, UBIFS_LPT_FANOUT);
+	for (i = 0; i < cnt; i++) {
+		struct ubifs_pnode *pnode;
+
+		pnode = pnode_lookup(c, i);
+		if (IS_ERR(pnode))
+			return PTR_ERR(pnode);
+		cond_resched();
+	}
+
+	/* Check nodes */
+	err = dbg_check_lpt_nodes(c, (struct ubifs_cnode *)c->nroot, 0, 0);
+	if (err)
+		return err;
+
+	/* Check each LEB */
+	for (lnum = c->lpt_first; lnum <= c->lpt_last; lnum++) {
+		err = dbg_check_ltab_lnum(c, lnum);
+		if (err) {
+			ubifs_err("failed at LEB %d", lnum);
+			return err;
+		}
+	}
+
+	dbg_lp("succeeded");
+	return 0;
+}
+
+/**
+ * dbg_chk_lpt_free_spc - check LPT free space is enough to write entire LPT.
+ * @c: the UBIFS file-system description object
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+int dbg_chk_lpt_free_spc(struct ubifs_info *c)
+{
+	long long free = 0;
+	int i;
+
+	if (!dbg_is_chk_lprops(c))
+		return 0;
+
+	for (i = 0; i < c->lpt_lebs; i++) {
+		if (c->ltab[i].tgc || c->ltab[i].cmt)
+			continue;
+		if (i + c->lpt_first == c->nhead_lnum)
+			free += c->leb_size - c->nhead_offs;
+		else if (c->ltab[i].free == c->leb_size)
+			free += c->leb_size;
+	}
+	if (free < c->lpt_sz) {
+		ubifs_err("LPT space error: free %lld lpt_sz %lld",
+			  free, c->lpt_sz);
+		ubifs_dump_lpt_info(c);
+		ubifs_dump_lpt_lebs(c);
+		dump_stack();
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * dbg_chk_lpt_sz - check LPT does not write more than LPT size.
+ * @c: the UBIFS file-system description object
+ * @action: what to do
+ * @len: length written
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ * The @action argument may be one of:
+ *   o %0 - LPT debugging checking starts, initialize debugging variables;
+ *   o %1 - wrote an LPT node, increase LPT size by @len bytes;
+ *   o %2 - switched to a different LEB and wasted @len bytes;
+ *   o %3 - check that we've written the right number of bytes.
+ *   o %4 - wasted @len bytes;
+ */
+int dbg_chk_lpt_sz(struct ubifs_info *c, int action, int len)
+{
+	struct ubifs_debug_info *d = c->dbg;
+	long long chk_lpt_sz, lpt_sz;
+	int err = 0;
+
+	if (!dbg_is_chk_lprops(c))
+		return 0;
+
+	switch (action) {
+	case 0:
+		d->chk_lpt_sz = 0;
+		d->chk_lpt_sz2 = 0;
+		d->chk_lpt_lebs = 0;
+		d->chk_lpt_wastage = 0;
+		if (c->dirty_pn_cnt > c->pnode_cnt) {
+			ubifs_err("dirty pnodes %d exceed max %d",
+				  c->dirty_pn_cnt, c->pnode_cnt);
+			err = -EINVAL;
+		}
+		if (c->dirty_nn_cnt > c->nnode_cnt) {
+			ubifs_err("dirty nnodes %d exceed max %d",
+				  c->dirty_nn_cnt, c->nnode_cnt);
+			err = -EINVAL;
+		}
+		return err;
+	case 1:
+		d->chk_lpt_sz += len;
+		return 0;
+	case 2:
+		d->chk_lpt_sz += len;
+		d->chk_lpt_wastage += len;
+		d->chk_lpt_lebs += 1;
+		return 0;
+	case 3:
+		chk_lpt_sz = c->leb_size;
+		chk_lpt_sz *= d->chk_lpt_lebs;
+		chk_lpt_sz += len - c->nhead_offs;
+		if (d->chk_lpt_sz != chk_lpt_sz) {
+			ubifs_err("LPT wrote %lld but space used was %lld",
+				  d->chk_lpt_sz, chk_lpt_sz);
+			err = -EINVAL;
+		}
+		if (d->chk_lpt_sz > c->lpt_sz) {
+			ubifs_err("LPT wrote %lld but lpt_sz is %lld",
+				  d->chk_lpt_sz, c->lpt_sz);
+			err = -EINVAL;
+		}
+		if (d->chk_lpt_sz2 && d->chk_lpt_sz != d->chk_lpt_sz2) {
+			ubifs_err("LPT layout size %lld but wrote %lld",
+				  d->chk_lpt_sz, d->chk_lpt_sz2);
+			err = -EINVAL;
+		}
+		if (d->chk_lpt_sz2 && d->new_nhead_offs != len) {
+			ubifs_err("LPT new nhead offs: expected %d was %d",
+				  d->new_nhead_offs, len);
+			err = -EINVAL;
+		}
+		lpt_sz = (long long)c->pnode_cnt * c->pnode_sz;
+		lpt_sz += (long long)c->nnode_cnt * c->nnode_sz;
+		lpt_sz += c->ltab_sz;
+		if (c->big_lpt)
+			lpt_sz += c->lsave_sz;
+		if (d->chk_lpt_sz - d->chk_lpt_wastage > lpt_sz) {
+			ubifs_err("LPT chk_lpt_sz %lld + waste %lld exceeds %lld",
+				  d->chk_lpt_sz, d->chk_lpt_wastage, lpt_sz);
+			err = -EINVAL;
+		}
+		if (err) {
+			ubifs_dump_lpt_info(c);
+			ubifs_dump_lpt_lebs(c);
+			dump_stack();
+		}
+		d->chk_lpt_sz2 = d->chk_lpt_sz;
+		d->chk_lpt_sz = 0;
+		d->chk_lpt_wastage = 0;
+		d->chk_lpt_lebs = 0;
+		d->new_nhead_offs = len;
+		return err;
+	case 4:
+		d->chk_lpt_sz += len;
+		d->chk_lpt_wastage += len;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+/**
+ * ubifs_dump_lpt_leb - dump an LPT LEB.
+ * @c: UBIFS file-system description object
+ * @lnum: LEB number to dump
+ *
+ * This function dumps an LEB from LPT area. Nodes in this area are very
+ * different to nodes in the main area (e.g., they do not have common headers,
+ * they do not have 8-byte alignments, etc), so we have a separate function to
+ * dump LPT area LEBs. Note, LPT has to be locked by the caller.
+ */
+static void dump_lpt_leb(const struct ubifs_info *c, int lnum)
+{
+	int err, len = c->leb_size, node_type, node_num, node_len, offs;
+	void *buf, *p;
+
+	pr_err("(pid %d) start dumping LEB %d\n", current->pid, lnum);
+	buf = p = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
+	if (!buf) {
+		ubifs_err("cannot allocate memory to dump LPT");
+		return;
+	}
+
+	err = ubifs_leb_read(c, lnum, buf, 0, c->leb_size, 1);
+	if (err)
+		goto out;
+
+	while (1) {
+		offs = c->leb_size - len;
+		if (!is_a_node(c, p, len)) {
+			int pad_len;
+
+			pad_len = get_pad_len(c, p, len);
+			if (pad_len) {
+				pr_err("LEB %d:%d, pad %d bytes\n",
+				       lnum, offs, pad_len);
+				p += pad_len;
+				len -= pad_len;
+				continue;
+			}
+			if (len)
+				pr_err("LEB %d:%d, free %d bytes\n",
+				       lnum, offs, len);
+			break;
+		}
+
+		node_type = get_lpt_node_type(c, p, &node_num);
+		switch (node_type) {
+		case UBIFS_LPT_PNODE:
+		{
+			node_len = c->pnode_sz;
+			if (c->big_lpt)
+				pr_err("LEB %d:%d, pnode num %d\n",
+				       lnum, offs, node_num);
+			else
+				pr_err("LEB %d:%d, pnode\n", lnum, offs);
+			break;
+		}
+		case UBIFS_LPT_NNODE:
+		{
+			int i;
+			struct ubifs_nnode nnode;
+
+			node_len = c->nnode_sz;
+			if (c->big_lpt)
+				pr_err("LEB %d:%d, nnode num %d, ",
+				       lnum, offs, node_num);
+			else
+				pr_err("LEB %d:%d, nnode, ",
+				       lnum, offs);
+			err = ubifs_unpack_nnode(c, p, &nnode);
+			for (i = 0; i < UBIFS_LPT_FANOUT; i++) {
+				pr_cont("%d:%d", nnode.nbranch[i].lnum,
+				       nnode.nbranch[i].offs);
+				if (i != UBIFS_LPT_FANOUT - 1)
+					pr_cont(", ");
+			}
+			pr_cont("\n");
+			break;
+		}
+		case UBIFS_LPT_LTAB:
+			node_len = c->ltab_sz;
+			pr_err("LEB %d:%d, ltab\n", lnum, offs);
+			break;
+		case UBIFS_LPT_LSAVE:
+			node_len = c->lsave_sz;
+			pr_err("LEB %d:%d, lsave len\n", lnum, offs);
+			break;
+		default:
+			ubifs_err("LPT node type %d not recognized", node_type);
+			goto out;
+		}
+
+		p += node_len;
+		len -= node_len;
+	}
+
+	pr_err("(pid %d) finish dumping LEB %d\n", current->pid, lnum);
+out:
+	vfree(buf);
+	return;
+}
+
+/**
+ * ubifs_dump_lpt_lebs - dump LPT lebs.
+ * @c: UBIFS file-system description object
+ *
+ * This function dumps all LPT LEBs. The caller has to make sure the LPT is
+ * locked.
+ */
+void ubifs_dump_lpt_lebs(const struct ubifs_info *c)
+{
+	int i;
+
+	pr_err("(pid %d) start dumping all LPT LEBs\n", current->pid);
+	for (i = 0; i < c->lpt_lebs; i++)
+		dump_lpt_leb(c, i + c->lpt_first);
+	pr_err("(pid %d) finish dumping all LPT LEBs\n", current->pid);
+}
+
+/**
+ * dbg_populate_lsave - debugging version of 'populate_lsave()'
+ * @c: UBIFS file-system description object
+ *
+ * This is a debugging version for 'populate_lsave()' which populates lsave
+ * with random LEBs instead of useful LEBs, which is good for test coverage.
+ * Returns zero if lsave has not been populated (this debugging feature is
+ * disabled) an non-zero if lsave has been populated.
+ */
+static int dbg_populate_lsave(struct ubifs_info *c)
+{
+	struct ubifs_lprops *lprops;
+	struct ubifs_lpt_heap *heap;
+	int i;
+
+	if (!dbg_is_chk_gen(c))
+		return 0;
+	if (prandom_u32() & 3)
+		return 0;
+
+	for (i = 0; i < c->lsave_cnt; i++)
+		c->lsave[i] = c->main_first;
+
+	list_for_each_entry(lprops, &c->empty_list, list)
+		c->lsave[prandom_u32() % c->lsave_cnt] = lprops->lnum;
+	list_for_each_entry(lprops, &c->freeable_list, list)
+		c->lsave[prandom_u32() % c->lsave_cnt] = lprops->lnum;
+	list_for_each_entry(lprops, &c->frdi_idx_list, list)
+		c->lsave[prandom_u32() % c->lsave_cnt] = lprops->lnum;
+
+	heap = &c->lpt_heap[LPROPS_DIRTY_IDX - 1];
+	for (i = 0; i < heap->cnt; i++)
+		c->lsave[prandom_u32() % c->lsave_cnt] = heap->arr[i]->lnum;
+	heap = &c->lpt_heap[LPROPS_DIRTY - 1];
+	for (i = 0; i < heap->cnt; i++)
+		c->lsave[prandom_u32() % c->lsave_cnt] = heap->arr[i]->lnum;
+	heap = &c->lpt_heap[LPROPS_FREE - 1];
+	for (i = 0; i < heap->cnt; i++)
+		c->lsave[prandom_u32() % c->lsave_cnt] = heap->arr[i]->lnum;
+
+	return 1;
+}
+#endif
diff --git a/fs/ubifs/master.c b/fs/ubifs/master.c
index 3f2926e..00ca855 100644
--- a/fs/ubifs/master.c
+++ b/fs/ubifs/master.c
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Artem Bityutskiy (Битюцкий Артём)
  *          Adrian Hunter
@@ -22,14 +11,21 @@
 
 /* This file implements reading and writing the master node */
 
+#define __UBOOT__
 #include "ubifs.h"
+#ifdef __UBOOT__
+#include <linux/compat.h>
+#include <linux/err.h>
+#include <ubi_uboot.h>
+#endif
 
 /**
  * scan_for_master - search the valid master node.
  * @c: UBIFS file-system description object
  *
  * This function scans the master node LEBs and search for the latest master
- * node. Returns zero in case of success and a negative error code in case of
+ * node. Returns zero in case of success, %-EUCLEAN if there master area is
+ * corrupted and requires recovery, and a negative error code in case of
  * failure.
  */
 static int scan_for_master(struct ubifs_info *c)
@@ -40,7 +36,7 @@ static int scan_for_master(struct ubifs_info *c)
 
 	lnum = UBIFS_MST_LNUM;
 
-	sleb = ubifs_scan(c, lnum, 0, c->sbuf);
+	sleb = ubifs_scan(c, lnum, 0, c->sbuf, 1);
 	if (IS_ERR(sleb))
 		return PTR_ERR(sleb);
 	nodes_cnt = sleb->nodes_cnt;
@@ -48,7 +44,7 @@ static int scan_for_master(struct ubifs_info *c)
 		snod = list_entry(sleb->nodes.prev, struct ubifs_scan_node,
 				  list);
 		if (snod->type != UBIFS_MST_NODE)
-			goto out;
+			goto out_dump;
 		memcpy(c->mst_node, snod->node, snod->len);
 		offs = snod->offs;
 	}
@@ -56,7 +52,7 @@ static int scan_for_master(struct ubifs_info *c)
 
 	lnum += 1;
 
-	sleb = ubifs_scan(c, lnum, 0, c->sbuf);
+	sleb = ubifs_scan(c, lnum, 0, c->sbuf, 1);
 	if (IS_ERR(sleb))
 		return PTR_ERR(sleb);
 	if (sleb->nodes_cnt != nodes_cnt)
@@ -65,7 +61,7 @@ static int scan_for_master(struct ubifs_info *c)
 		goto out;
 	snod = list_entry(sleb->nodes.prev, struct ubifs_scan_node, list);
 	if (snod->type != UBIFS_MST_NODE)
-		goto out;
+		goto out_dump;
 	if (snod->offs != offs)
 		goto out;
 	if (memcmp((void *)c->mst_node + UBIFS_CH_SZ,
@@ -78,6 +74,12 @@ static int scan_for_master(struct ubifs_info *c)
 
 out:
 	ubifs_scan_destroy(sleb);
+	return -EUCLEAN;
+
+out_dump:
+	ubifs_err("unexpected node type %d master LEB %d:%d",
+		  snod->type, lnum, snod->offs);
+	ubifs_scan_destroy(sleb);
 	return -EINVAL;
 }
 
@@ -141,7 +143,7 @@ static int validate_master(const struct ubifs_info *c)
 	}
 
 	main_sz = (long long)c->main_lebs * c->leb_size;
-	if (c->old_idx_sz & 7 || c->old_idx_sz >= main_sz) {
+	if (c->bi.old_idx_sz & 7 || c->bi.old_idx_sz >= main_sz) {
 		err = 9;
 		goto out;
 	}
@@ -211,7 +213,7 @@ static int validate_master(const struct ubifs_info *c)
 	}
 
 	if (c->lst.total_dead + c->lst.total_dark +
-	    c->lst.total_used + c->old_idx_sz > main_sz) {
+	    c->lst.total_used + c->bi.old_idx_sz > main_sz) {
 		err = 21;
 		goto out;
 	}
@@ -234,7 +236,7 @@ static int validate_master(const struct ubifs_info *c)
 
 out:
 	ubifs_err("bad master node at offset %d error %d", c->mst_offs, err);
-	dbg_dump_node(c, c->mst_node);
+	ubifs_dump_node(c, c->mst_node);
 	return -EINVAL;
 }
 
@@ -256,7 +258,8 @@ int ubifs_read_master(struct ubifs_info *c)
 
 	err = scan_for_master(c);
 	if (err) {
-		err = ubifs_recover_master_node(c);
+		if (err == -EUCLEAN)
+			err = ubifs_recover_master_node(c);
 		if (err)
 			/*
 			 * Note, we do not free 'c->mst_node' here because the
@@ -278,7 +281,7 @@ int ubifs_read_master(struct ubifs_info *c)
 	c->gc_lnum         = le32_to_cpu(c->mst_node->gc_lnum);
 	c->ihead_lnum      = le32_to_cpu(c->mst_node->ihead_lnum);
 	c->ihead_offs      = le32_to_cpu(c->mst_node->ihead_offs);
-	c->old_idx_sz      = le64_to_cpu(c->mst_node->index_size);
+	c->bi.old_idx_sz   = le64_to_cpu(c->mst_node->index_size);
 	c->lpt_lnum        = le32_to_cpu(c->mst_node->lpt_lnum);
 	c->lpt_offs        = le32_to_cpu(c->mst_node->lpt_offs);
 	c->nhead_lnum      = le32_to_cpu(c->mst_node->nhead_lnum);
@@ -297,7 +300,7 @@ int ubifs_read_master(struct ubifs_info *c)
 	c->lst.total_dead  = le64_to_cpu(c->mst_node->total_dead);
 	c->lst.total_dark  = le64_to_cpu(c->mst_node->total_dark);
 
-	c->calc_idx_sz = c->old_idx_sz;
+	c->calc_idx_sz = c->bi.old_idx_sz;
 
 	if (c->mst_node->flags & cpu_to_le32(UBIFS_MST_NO_ORPHS))
 		c->no_orphs = 1;
@@ -309,7 +312,7 @@ int ubifs_read_master(struct ubifs_info *c)
 		if (c->leb_cnt < old_leb_cnt ||
 		    c->leb_cnt < UBIFS_MIN_LEB_CNT) {
 			ubifs_err("bad leb_cnt on master node");
-			dbg_dump_node(c, c->mst_node);
+			ubifs_dump_node(c, c->mst_node);
 			return -EINVAL;
 		}
 
@@ -335,7 +338,58 @@ int ubifs_read_master(struct ubifs_info *c)
 	if (err)
 		return err;
 
+#ifndef __UBOOT__
 	err = dbg_old_index_check_init(c, &c->zroot);
+#endif
+
+	return err;
+}
+
+#ifndef __UBOOT__
+/**
+ * ubifs_write_master - write master node.
+ * @c: UBIFS file-system description object
+ *
+ * This function writes the master node. The caller has to take the
+ * @c->mst_mutex lock before calling this function. Returns zero in case of
+ * success and a negative error code in case of failure. The master node is
+ * written twice to enable recovery.
+ */
+int ubifs_write_master(struct ubifs_info *c)
+{
+	int err, lnum, offs, len;
+
+	ubifs_assert(!c->ro_media && !c->ro_mount);
+	if (c->ro_error)
+		return -EROFS;
+
+	lnum = UBIFS_MST_LNUM;
+	offs = c->mst_offs + c->mst_node_alsz;
+	len = UBIFS_MST_NODE_SZ;
+
+	if (offs + UBIFS_MST_NODE_SZ > c->leb_size) {
+		err = ubifs_leb_unmap(c, lnum);
+		if (err)
+			return err;
+		offs = 0;
+	}
+
+	c->mst_offs = offs;
+	c->mst_node->highest_inum = cpu_to_le64(c->highest_inum);
+
+	err = ubifs_write_node(c, c->mst_node, len, lnum, offs);
+	if (err)
+		return err;
+
+	lnum += 1;
+
+	if (offs == 0) {
+		err = ubifs_leb_unmap(c, lnum);
+		if (err)
+			return err;
+	}
+	err = ubifs_write_node(c, c->mst_node, len, lnum, offs);
 
 	return err;
 }
+#endif
diff --git a/fs/ubifs/misc.h b/fs/ubifs/misc.h
index 609232e..4316d3c 100644
--- a/fs/ubifs/misc.h
+++ b/fs/ubifs/misc.h
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Artem Bityutskiy (Битюцкий Артём)
  *          Adrian Hunter
@@ -27,6 +16,7 @@
 #ifndef __UBIFS_MISC_H__
 #define __UBIFS_MISC_H__
 
+#define __UBOOT__
 /**
  * ubifs_zn_dirty - check if znode is dirty.
  * @znode: znode to check
@@ -39,6 +29,29 @@ static inline int ubifs_zn_dirty(const struct ubifs_znode *znode)
 }
 
 /**
+ * ubifs_zn_obsolete - check if znode is obsolete.
+ * @znode: znode to check
+ *
+ * This helper function returns %1 if @znode is obsolete and %0 otherwise.
+ */
+static inline int ubifs_zn_obsolete(const struct ubifs_znode *znode)
+{
+	return !!test_bit(OBSOLETE_ZNODE, &znode->flags);
+}
+
+/**
+ * ubifs_zn_cow - check if znode has to be copied on write.
+ * @znode: znode to check
+ *
+ * This helper function returns %1 if @znode is has COW flag set and %0
+ * otherwise.
+ */
+static inline int ubifs_zn_cow(const struct ubifs_znode *znode)
+{
+	return !!test_bit(COW_ZNODE, &znode->flags);
+}
+
+/**
  * ubifs_wake_up_bgt - wake up background thread.
  * @c: UBIFS file-system description object
  */
@@ -121,82 +134,27 @@ static inline int ubifs_wbuf_sync(struct ubifs_wbuf *wbuf)
 	return err;
 }
 
+#ifndef __UBOOT__
 /**
- * ubifs_leb_unmap - unmap an LEB.
- * @c: UBIFS file-system description object
- * @lnum: LEB number to unmap
- *
- * This function returns %0 on success and a negative error code on failure.
- */
-static inline int ubifs_leb_unmap(const struct ubifs_info *c, int lnum)
-{
-	int err;
-
-	if (c->ro_media)
-		return -EROFS;
-	err = ubi_leb_unmap(c->ubi, lnum);
-	if (err) {
-		ubifs_err("unmap LEB %d failed, error %d", lnum, err);
-		return err;
-	}
-
-	return 0;
-}
-
-/**
- * ubifs_leb_write - write to a LEB.
- * @c: UBIFS file-system description object
- * @lnum: LEB number to write
- * @buf: buffer to write from
- * @offs: offset within LEB to write to
- * @len: length to write
- * @dtype: data type
- *
- * This function returns %0 on success and a negative error code on failure.
- */
-static inline int ubifs_leb_write(const struct ubifs_info *c, int lnum,
-				  const void *buf, int offs, int len, int dtype)
-{
-	int err;
-
-	if (c->ro_media)
-		return -EROFS;
-	err = ubi_leb_write(c->ubi, lnum, buf, offs, len, dtype);
-	if (err) {
-		ubifs_err("writing %d bytes at %d:%d, error %d",
-			  len, lnum, offs, err);
-		return err;
-	}
-
-	return 0;
-}
-
-/**
- * ubifs_leb_change - atomic LEB change.
- * @c: UBIFS file-system description object
- * @lnum: LEB number to write
- * @buf: buffer to write from
- * @len: length to write
- * @dtype: data type
+ * ubifs_encode_dev - encode device node IDs.
+ * @dev: UBIFS device node information
+ * @rdev: device IDs to encode
  *
- * This function returns %0 on success and a negative error code on failure.
+ * This is a helper function which encodes major/minor numbers of a device node
+ * into UBIFS device node description. We use standard Linux "new" and "huge"
+ * encodings.
  */
-static inline int ubifs_leb_change(const struct ubifs_info *c, int lnum,
-				   const void *buf, int len, int dtype)
+static inline int ubifs_encode_dev(union ubifs_dev_desc *dev, dev_t rdev)
 {
-	int err;
-
-	if (c->ro_media)
-		return -EROFS;
-	err = ubi_leb_change(c->ubi, lnum, buf, len, dtype);
-	if (err) {
-		ubifs_err("changing %d bytes in LEB %d, error %d",
-			  len, lnum, err);
-		return err;
+	if (new_valid_dev(rdev)) {
+		dev->new = cpu_to_le32(new_encode_dev(rdev));
+		return sizeof(dev->new);
+	} else {
+		dev->huge = cpu_to_le64(huge_encode_dev(rdev));
+		return sizeof(dev->huge);
 	}
-
-	return 0;
 }
+#endif
 
 /**
  * ubifs_add_dirt - add dirty space to LEB properties.
@@ -260,8 +218,24 @@ struct ubifs_branch *ubifs_idx_branch(const struct ubifs_info *c,
 static inline void *ubifs_idx_key(const struct ubifs_info *c,
 				  const struct ubifs_idx_node *idx)
 {
-	const __u8 *branch = idx->branches;
-	return (void *)((struct ubifs_branch *)branch)->key;
+#ifndef __UBOOT__
+	return (void *)((struct ubifs_branch *)idx->branches)->key;
+#else
+	struct ubifs_branch *tmp;
+
+	tmp = (struct ubifs_branch *)idx->branches;
+	return (void *)tmp->key;
+#endif
+}
+
+/**
+ * ubifs_current_time - round current time to time granularity.
+ * @inode: inode
+ */
+static inline struct timespec ubifs_current_time(struct inode *inode)
+{
+	return (inode->i_sb->s_time_gran < NSEC_PER_SEC) ?
+		current_fs_time(inode->i_sb) : CURRENT_TIME_SEC;
 }
 
 /**
@@ -308,4 +282,21 @@ static inline void ubifs_release_lprops(struct ubifs_info *c)
 	mutex_unlock(&c->lp_mutex);
 }
 
+/**
+ * ubifs_next_log_lnum - switch to the next log LEB.
+ * @c: UBIFS file-system description object
+ * @lnum: current log LEB
+ *
+ * This helper function returns the log LEB number which goes next after LEB
+ * 'lnum'.
+ */
+static inline int ubifs_next_log_lnum(const struct ubifs_info *c, int lnum)
+{
+	lnum += 1;
+	if (lnum > c->log_last)
+		lnum = UBIFS_LOG_LNUM;
+
+	return lnum;
+}
+
 #endif /* __UBIFS_MISC_H__ */
diff --git a/fs/ubifs/orphan.c b/fs/ubifs/orphan.c
index d091031..4e42879 100644
--- a/fs/ubifs/orphan.c
+++ b/fs/ubifs/orphan.c
@@ -3,22 +3,12 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Author: Adrian Hunter
  */
 
+#include <linux/err.h>
 #include "ubifs.h"
 
 /*
@@ -52,6 +42,166 @@
  * than the maximum number of orphans allowed.
  */
 
+static int dbg_check_orphans(struct ubifs_info *c);
+
+/**
+ * ubifs_add_orphan - add an orphan.
+ * @c: UBIFS file-system description object
+ * @inum: orphan inode number
+ *
+ * Add an orphan. This function is called when an inodes link count drops to
+ * zero.
+ */
+int ubifs_add_orphan(struct ubifs_info *c, ino_t inum)
+{
+	struct ubifs_orphan *orphan, *o;
+	struct rb_node **p, *parent = NULL;
+
+	orphan = kzalloc(sizeof(struct ubifs_orphan), GFP_NOFS);
+	if (!orphan)
+		return -ENOMEM;
+	orphan->inum = inum;
+	orphan->new = 1;
+
+	spin_lock(&c->orphan_lock);
+	if (c->tot_orphans >= c->max_orphans) {
+		spin_unlock(&c->orphan_lock);
+		kfree(orphan);
+		return -ENFILE;
+	}
+	p = &c->orph_tree.rb_node;
+	while (*p) {
+		parent = *p;
+		o = rb_entry(parent, struct ubifs_orphan, rb);
+		if (inum < o->inum)
+			p = &(*p)->rb_left;
+		else if (inum > o->inum)
+			p = &(*p)->rb_right;
+		else {
+			ubifs_err("orphaned twice");
+			spin_unlock(&c->orphan_lock);
+			kfree(orphan);
+			return 0;
+		}
+	}
+	c->tot_orphans += 1;
+	c->new_orphans += 1;
+	rb_link_node(&orphan->rb, parent, p);
+	rb_insert_color(&orphan->rb, &c->orph_tree);
+	list_add_tail(&orphan->list, &c->orph_list);
+	list_add_tail(&orphan->new_list, &c->orph_new);
+	spin_unlock(&c->orphan_lock);
+	dbg_gen("ino %lu", (unsigned long)inum);
+	return 0;
+}
+
+/**
+ * ubifs_delete_orphan - delete an orphan.
+ * @c: UBIFS file-system description object
+ * @inum: orphan inode number
+ *
+ * Delete an orphan. This function is called when an inode is deleted.
+ */
+void ubifs_delete_orphan(struct ubifs_info *c, ino_t inum)
+{
+	struct ubifs_orphan *o;
+	struct rb_node *p;
+
+	spin_lock(&c->orphan_lock);
+	p = c->orph_tree.rb_node;
+	while (p) {
+		o = rb_entry(p, struct ubifs_orphan, rb);
+		if (inum < o->inum)
+			p = p->rb_left;
+		else if (inum > o->inum)
+			p = p->rb_right;
+		else {
+			if (o->del) {
+				spin_unlock(&c->orphan_lock);
+				dbg_gen("deleted twice ino %lu",
+					(unsigned long)inum);
+				return;
+			}
+			if (o->cmt) {
+				o->del = 1;
+				o->dnext = c->orph_dnext;
+				c->orph_dnext = o;
+				spin_unlock(&c->orphan_lock);
+				dbg_gen("delete later ino %lu",
+					(unsigned long)inum);
+				return;
+			}
+			rb_erase(p, &c->orph_tree);
+			list_del(&o->list);
+			c->tot_orphans -= 1;
+			if (o->new) {
+				list_del(&o->new_list);
+				c->new_orphans -= 1;
+			}
+			spin_unlock(&c->orphan_lock);
+			kfree(o);
+			dbg_gen("inum %lu", (unsigned long)inum);
+			return;
+		}
+	}
+	spin_unlock(&c->orphan_lock);
+	ubifs_err("missing orphan ino %lu", (unsigned long)inum);
+	dump_stack();
+}
+
+/**
+ * ubifs_orphan_start_commit - start commit of orphans.
+ * @c: UBIFS file-system description object
+ *
+ * Start commit of orphans.
+ */
+int ubifs_orphan_start_commit(struct ubifs_info *c)
+{
+	struct ubifs_orphan *orphan, **last;
+
+	spin_lock(&c->orphan_lock);
+	last = &c->orph_cnext;
+	list_for_each_entry(orphan, &c->orph_new, new_list) {
+		ubifs_assert(orphan->new);
+		ubifs_assert(!orphan->cmt);
+		orphan->new = 0;
+		orphan->cmt = 1;
+		*last = orphan;
+		last = &orphan->cnext;
+	}
+	*last = NULL;
+	c->cmt_orphans = c->new_orphans;
+	c->new_orphans = 0;
+	dbg_cmt("%d orphans to commit", c->cmt_orphans);
+	INIT_LIST_HEAD(&c->orph_new);
+	if (c->tot_orphans == 0)
+		c->no_orphs = 1;
+	else
+		c->no_orphs = 0;
+	spin_unlock(&c->orphan_lock);
+	return 0;
+}
+
+/**
+ * avail_orphs - calculate available space.
+ * @c: UBIFS file-system description object
+ *
+ * This function returns the number of orphans that can be written in the
+ * available space.
+ */
+static int avail_orphs(struct ubifs_info *c)
+{
+	int avail_lebs, avail, gap;
+
+	avail_lebs = c->orph_lebs - (c->ohead_lnum - c->orph_first) - 1;
+	avail = avail_lebs *
+	       ((c->leb_size - UBIFS_ORPH_NODE_SZ) / sizeof(__le64));
+	gap = c->leb_size - c->ohead_offs;
+	if (gap >= UBIFS_ORPH_NODE_SZ + sizeof(__le64))
+		avail += (gap - UBIFS_ORPH_NODE_SZ) / sizeof(__le64);
+	return avail;
+}
+
 /**
  * tot_avail_orphs - calculate total space.
  * @c: UBIFS file-system description object
@@ -70,6 +220,256 @@ static int tot_avail_orphs(struct ubifs_info *c)
 }
 
 /**
+ * do_write_orph_node - write a node to the orphan head.
+ * @c: UBIFS file-system description object
+ * @len: length of node
+ * @atomic: write atomically
+ *
+ * This function writes a node to the orphan head from the orphan buffer. If
+ * %atomic is not zero, then the write is done atomically. On success, %0 is
+ * returned, otherwise a negative error code is returned.
+ */
+static int do_write_orph_node(struct ubifs_info *c, int len, int atomic)
+{
+	int err = 0;
+
+	if (atomic) {
+		ubifs_assert(c->ohead_offs == 0);
+		ubifs_prepare_node(c, c->orph_buf, len, 1);
+		len = ALIGN(len, c->min_io_size);
+		err = ubifs_leb_change(c, c->ohead_lnum, c->orph_buf, len);
+	} else {
+		if (c->ohead_offs == 0) {
+			/* Ensure LEB has been unmapped */
+			err = ubifs_leb_unmap(c, c->ohead_lnum);
+			if (err)
+				return err;
+		}
+		err = ubifs_write_node(c, c->orph_buf, len, c->ohead_lnum,
+				       c->ohead_offs);
+	}
+	return err;
+}
+
+/**
+ * write_orph_node - write an orphan node.
+ * @c: UBIFS file-system description object
+ * @atomic: write atomically
+ *
+ * This function builds an orphan node from the cnext list and writes it to the
+ * orphan head. On success, %0 is returned, otherwise a negative error code
+ * is returned.
+ */
+static int write_orph_node(struct ubifs_info *c, int atomic)
+{
+	struct ubifs_orphan *orphan, *cnext;
+	struct ubifs_orph_node *orph;
+	int gap, err, len, cnt, i;
+
+	ubifs_assert(c->cmt_orphans > 0);
+	gap = c->leb_size - c->ohead_offs;
+	if (gap < UBIFS_ORPH_NODE_SZ + sizeof(__le64)) {
+		c->ohead_lnum += 1;
+		c->ohead_offs = 0;
+		gap = c->leb_size;
+		if (c->ohead_lnum > c->orph_last) {
+			/*
+			 * We limit the number of orphans so that this should
+			 * never happen.
+			 */
+			ubifs_err("out of space in orphan area");
+			return -EINVAL;
+		}
+	}
+	cnt = (gap - UBIFS_ORPH_NODE_SZ) / sizeof(__le64);
+	if (cnt > c->cmt_orphans)
+		cnt = c->cmt_orphans;
+	len = UBIFS_ORPH_NODE_SZ + cnt * sizeof(__le64);
+	ubifs_assert(c->orph_buf);
+	orph = c->orph_buf;
+	orph->ch.node_type = UBIFS_ORPH_NODE;
+	spin_lock(&c->orphan_lock);
+	cnext = c->orph_cnext;
+	for (i = 0; i < cnt; i++) {
+		orphan = cnext;
+		ubifs_assert(orphan->cmt);
+		orph->inos[i] = cpu_to_le64(orphan->inum);
+		orphan->cmt = 0;
+		cnext = orphan->cnext;
+		orphan->cnext = NULL;
+	}
+	c->orph_cnext = cnext;
+	c->cmt_orphans -= cnt;
+	spin_unlock(&c->orphan_lock);
+	if (c->cmt_orphans)
+		orph->cmt_no = cpu_to_le64(c->cmt_no);
+	else
+		/* Mark the last node of the commit */
+		orph->cmt_no = cpu_to_le64((c->cmt_no) | (1ULL << 63));
+	ubifs_assert(c->ohead_offs + len <= c->leb_size);
+	ubifs_assert(c->ohead_lnum >= c->orph_first);
+	ubifs_assert(c->ohead_lnum <= c->orph_last);
+	err = do_write_orph_node(c, len, atomic);
+	c->ohead_offs += ALIGN(len, c->min_io_size);
+	c->ohead_offs = ALIGN(c->ohead_offs, 8);
+	return err;
+}
+
+/**
+ * write_orph_nodes - write orphan nodes until there are no more to commit.
+ * @c: UBIFS file-system description object
+ * @atomic: write atomically
+ *
+ * This function writes orphan nodes for all the orphans to commit. On success,
+ * %0 is returned, otherwise a negative error code is returned.
+ */
+static int write_orph_nodes(struct ubifs_info *c, int atomic)
+{
+	int err;
+
+	while (c->cmt_orphans > 0) {
+		err = write_orph_node(c, atomic);
+		if (err)
+			return err;
+	}
+	if (atomic) {
+		int lnum;
+
+		/* Unmap any unused LEBs after consolidation */
+		lnum = c->ohead_lnum + 1;
+		for (lnum = c->ohead_lnum + 1; lnum <= c->orph_last; lnum++) {
+			err = ubifs_leb_unmap(c, lnum);
+			if (err)
+				return err;
+		}
+	}
+	return 0;
+}
+
+/**
+ * consolidate - consolidate the orphan area.
+ * @c: UBIFS file-system description object
+ *
+ * This function enables consolidation by putting all the orphans into the list
+ * to commit. The list is in the order that the orphans were added, and the
+ * LEBs are written atomically in order, so at no time can orphans be lost by
+ * an unclean unmount.
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+static int consolidate(struct ubifs_info *c)
+{
+	int tot_avail = tot_avail_orphs(c), err = 0;
+
+	spin_lock(&c->orphan_lock);
+	dbg_cmt("there is space for %d orphans and there are %d",
+		tot_avail, c->tot_orphans);
+	if (c->tot_orphans - c->new_orphans <= tot_avail) {
+		struct ubifs_orphan *orphan, **last;
+		int cnt = 0;
+
+		/* Change the cnext list to include all non-new orphans */
+		last = &c->orph_cnext;
+		list_for_each_entry(orphan, &c->orph_list, list) {
+			if (orphan->new)
+				continue;
+			orphan->cmt = 1;
+			*last = orphan;
+			last = &orphan->cnext;
+			cnt += 1;
+		}
+		*last = NULL;
+		ubifs_assert(cnt == c->tot_orphans - c->new_orphans);
+		c->cmt_orphans = cnt;
+		c->ohead_lnum = c->orph_first;
+		c->ohead_offs = 0;
+	} else {
+		/*
+		 * We limit the number of orphans so that this should
+		 * never happen.
+		 */
+		ubifs_err("out of space in orphan area");
+		err = -EINVAL;
+	}
+	spin_unlock(&c->orphan_lock);
+	return err;
+}
+
+/**
+ * commit_orphans - commit orphans.
+ * @c: UBIFS file-system description object
+ *
+ * This function commits orphans to flash. On success, %0 is returned,
+ * otherwise a negative error code is returned.
+ */
+static int commit_orphans(struct ubifs_info *c)
+{
+	int avail, atomic = 0, err;
+
+	ubifs_assert(c->cmt_orphans > 0);
+	avail = avail_orphs(c);
+	if (avail < c->cmt_orphans) {
+		/* Not enough space to write new orphans, so consolidate */
+		err = consolidate(c);
+		if (err)
+			return err;
+		atomic = 1;
+	}
+	err = write_orph_nodes(c, atomic);
+	return err;
+}
+
+/**
+ * erase_deleted - erase the orphans marked for deletion.
+ * @c: UBIFS file-system description object
+ *
+ * During commit, the orphans being committed cannot be deleted, so they are
+ * marked for deletion and deleted by this function. Also, the recovery
+ * adds killed orphans to the deletion list, and therefore they are deleted
+ * here too.
+ */
+static void erase_deleted(struct ubifs_info *c)
+{
+	struct ubifs_orphan *orphan, *dnext;
+
+	spin_lock(&c->orphan_lock);
+	dnext = c->orph_dnext;
+	while (dnext) {
+		orphan = dnext;
+		dnext = orphan->dnext;
+		ubifs_assert(!orphan->new);
+		ubifs_assert(orphan->del);
+		rb_erase(&orphan->rb, &c->orph_tree);
+		list_del(&orphan->list);
+		c->tot_orphans -= 1;
+		dbg_gen("deleting orphan ino %lu", (unsigned long)orphan->inum);
+		kfree(orphan);
+	}
+	c->orph_dnext = NULL;
+	spin_unlock(&c->orphan_lock);
+}
+
+/**
+ * ubifs_orphan_end_commit - end commit of orphans.
+ * @c: UBIFS file-system description object
+ *
+ * End commit of orphans.
+ */
+int ubifs_orphan_end_commit(struct ubifs_info *c)
+{
+	int err;
+
+	if (c->cmt_orphans != 0) {
+		err = commit_orphans(c);
+		if (err)
+			return err;
+	}
+	erase_deleted(c);
+	err = dbg_check_orphans(c);
+	return err;
+}
+
+/**
  * ubifs_clear_orphans - erase all LEBs used for orphans.
  * @c: UBIFS file-system description object
  *
@@ -128,6 +528,7 @@ static int insert_dead_orphan(struct ubifs_info *c, ino_t inum)
 	rb_link_node(&orphan->rb, parent, p);
 	rb_insert_color(&orphan->rb, &c->orph_tree);
 	list_add_tail(&orphan->list, &c->orph_list);
+	orphan->del = 1;
 	orphan->dnext = c->orph_dnext;
 	c->orph_dnext = orphan;
 	dbg_mnt("ino %lu, new %d, tot %d", (unsigned long)inum,
@@ -159,9 +560,9 @@ static int do_kill_orphans(struct ubifs_info *c, struct ubifs_scan_leb *sleb,
 
 	list_for_each_entry(snod, &sleb->nodes, list) {
 		if (snod->type != UBIFS_ORPH_NODE) {
-			ubifs_err("invalid node type %d in orphan area at "
-				  "%d:%d", snod->type, sleb->lnum, snod->offs);
-			dbg_dump_node(c, snod->node);
+			ubifs_err("invalid node type %d in orphan area at %d:%d",
+				  snod->type, sleb->lnum, snod->offs);
+			ubifs_dump_node(c, snod->node);
 			return -EINVAL;
 		}
 
@@ -186,10 +587,9 @@ static int do_kill_orphans(struct ubifs_info *c, struct ubifs_scan_leb *sleb,
 			 * number. That makes this orphan node, out of date.
 			 */
 			if (!first) {
-				ubifs_err("out of order commit number %llu in "
-					  "orphan node at %d:%d",
+				ubifs_err("out of order commit number %llu in orphan node at %d:%d",
 					  cmt_no, sleb->lnum, snod->offs);
-				dbg_dump_node(c, snod->node);
+				ubifs_dump_node(c, snod->node);
 				return -EINVAL;
 			}
 			dbg_rcvry("out of date LEB %d", sleb->lnum);
@@ -262,9 +662,11 @@ static int kill_orphans(struct ubifs_info *c)
 		struct ubifs_scan_leb *sleb;
 
 		dbg_rcvry("LEB %d", lnum);
-		sleb = ubifs_scan(c, lnum, 0, c->sbuf);
+		sleb = ubifs_scan(c, lnum, 0, c->sbuf, 1);
 		if (IS_ERR(sleb)) {
-			sleb = ubifs_recover_leb(c, lnum, 0, c->sbuf, 0);
+			if (PTR_ERR(sleb) == -EUCLEAN)
+				sleb = ubifs_recover_leb(c, lnum, 0,
+							 c->sbuf, -1);
 			if (IS_ERR(sleb)) {
 				err = PTR_ERR(sleb);
 				break;
@@ -314,3 +716,232 @@ int ubifs_mount_orphans(struct ubifs_info *c, int unclean, int read_only)
 
 	return err;
 }
+
+/*
+ * Everything below is related to debugging.
+ */
+
+struct check_orphan {
+	struct rb_node rb;
+	ino_t inum;
+};
+
+struct check_info {
+	unsigned long last_ino;
+	unsigned long tot_inos;
+	unsigned long missing;
+	unsigned long long leaf_cnt;
+	struct ubifs_ino_node *node;
+	struct rb_root root;
+};
+
+static int dbg_find_orphan(struct ubifs_info *c, ino_t inum)
+{
+	struct ubifs_orphan *o;
+	struct rb_node *p;
+
+	spin_lock(&c->orphan_lock);
+	p = c->orph_tree.rb_node;
+	while (p) {
+		o = rb_entry(p, struct ubifs_orphan, rb);
+		if (inum < o->inum)
+			p = p->rb_left;
+		else if (inum > o->inum)
+			p = p->rb_right;
+		else {
+			spin_unlock(&c->orphan_lock);
+			return 1;
+		}
+	}
+	spin_unlock(&c->orphan_lock);
+	return 0;
+}
+
+static int dbg_ins_check_orphan(struct rb_root *root, ino_t inum)
+{
+	struct check_orphan *orphan, *o;
+	struct rb_node **p, *parent = NULL;
+
+	orphan = kzalloc(sizeof(struct check_orphan), GFP_NOFS);
+	if (!orphan)
+		return -ENOMEM;
+	orphan->inum = inum;
+
+	p = &root->rb_node;
+	while (*p) {
+		parent = *p;
+		o = rb_entry(parent, struct check_orphan, rb);
+		if (inum < o->inum)
+			p = &(*p)->rb_left;
+		else if (inum > o->inum)
+			p = &(*p)->rb_right;
+		else {
+			kfree(orphan);
+			return 0;
+		}
+	}
+	rb_link_node(&orphan->rb, parent, p);
+	rb_insert_color(&orphan->rb, root);
+	return 0;
+}
+
+static int dbg_find_check_orphan(struct rb_root *root, ino_t inum)
+{
+	struct check_orphan *o;
+	struct rb_node *p;
+
+	p = root->rb_node;
+	while (p) {
+		o = rb_entry(p, struct check_orphan, rb);
+		if (inum < o->inum)
+			p = p->rb_left;
+		else if (inum > o->inum)
+			p = p->rb_right;
+		else
+			return 1;
+	}
+	return 0;
+}
+
+static void dbg_free_check_tree(struct rb_root *root)
+{
+	struct check_orphan *o, *n;
+
+	rbtree_postorder_for_each_entry_safe(o, n, root, rb)
+		kfree(o);
+}
+
+static int dbg_orphan_check(struct ubifs_info *c, struct ubifs_zbranch *zbr,
+			    void *priv)
+{
+	struct check_info *ci = priv;
+	ino_t inum;
+	int err;
+
+	inum = key_inum(c, &zbr->key);
+	if (inum != ci->last_ino) {
+		/* Lowest node type is the inode node, so it comes first */
+		if (key_type(c, &zbr->key) != UBIFS_INO_KEY)
+			ubifs_err("found orphan node ino %lu, type %d",
+				  (unsigned long)inum, key_type(c, &zbr->key));
+		ci->last_ino = inum;
+		ci->tot_inos += 1;
+		err = ubifs_tnc_read_node(c, zbr, ci->node);
+		if (err) {
+			ubifs_err("node read failed, error %d", err);
+			return err;
+		}
+		if (ci->node->nlink == 0)
+			/* Must be recorded as an orphan */
+			if (!dbg_find_check_orphan(&ci->root, inum) &&
+			    !dbg_find_orphan(c, inum)) {
+				ubifs_err("missing orphan, ino %lu",
+					  (unsigned long)inum);
+				ci->missing += 1;
+			}
+	}
+	ci->leaf_cnt += 1;
+	return 0;
+}
+
+static int dbg_read_orphans(struct check_info *ci, struct ubifs_scan_leb *sleb)
+{
+	struct ubifs_scan_node *snod;
+	struct ubifs_orph_node *orph;
+	ino_t inum;
+	int i, n, err;
+
+	list_for_each_entry(snod, &sleb->nodes, list) {
+		cond_resched();
+		if (snod->type != UBIFS_ORPH_NODE)
+			continue;
+		orph = snod->node;
+		n = (le32_to_cpu(orph->ch.len) - UBIFS_ORPH_NODE_SZ) >> 3;
+		for (i = 0; i < n; i++) {
+			inum = le64_to_cpu(orph->inos[i]);
+			err = dbg_ins_check_orphan(&ci->root, inum);
+			if (err)
+				return err;
+		}
+	}
+	return 0;
+}
+
+static int dbg_scan_orphans(struct ubifs_info *c, struct check_info *ci)
+{
+	int lnum, err = 0;
+	void *buf;
+
+	/* Check no-orphans flag and skip this if no orphans */
+	if (c->no_orphs)
+		return 0;
+
+	buf = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
+	if (!buf) {
+		ubifs_err("cannot allocate memory to check orphans");
+		return 0;
+	}
+
+	for (lnum = c->orph_first; lnum <= c->orph_last; lnum++) {
+		struct ubifs_scan_leb *sleb;
+
+		sleb = ubifs_scan(c, lnum, 0, buf, 0);
+		if (IS_ERR(sleb)) {
+			err = PTR_ERR(sleb);
+			break;
+		}
+
+		err = dbg_read_orphans(ci, sleb);
+		ubifs_scan_destroy(sleb);
+		if (err)
+			break;
+	}
+
+	vfree(buf);
+	return err;
+}
+
+static int dbg_check_orphans(struct ubifs_info *c)
+{
+	struct check_info ci;
+	int err;
+
+	if (!dbg_is_chk_orph(c))
+		return 0;
+
+	ci.last_ino = 0;
+	ci.tot_inos = 0;
+	ci.missing  = 0;
+	ci.leaf_cnt = 0;
+	ci.root = RB_ROOT;
+	ci.node = kmalloc(UBIFS_MAX_INO_NODE_SZ, GFP_NOFS);
+	if (!ci.node) {
+		ubifs_err("out of memory");
+		return -ENOMEM;
+	}
+
+	err = dbg_scan_orphans(c, &ci);
+	if (err)
+		goto out;
+
+	err = dbg_walk_index(c, &dbg_orphan_check, NULL, &ci);
+	if (err) {
+		ubifs_err("cannot scan TNC, error %d", err);
+		goto out;
+	}
+
+	if (ci.missing) {
+		ubifs_err("%lu missing orphan(s)", ci.missing);
+		err = -EINVAL;
+		goto out;
+	}
+
+	dbg_cmt("last inode number is %lu", ci.last_ino);
+	dbg_cmt("total number of inodes is %lu", ci.tot_inos);
+	dbg_cmt("total number of leaf nodes is %llu", ci.leaf_cnt);
+
+out:
+	dbg_free_check_tree(&ci.root);
+	kfree(ci.node);
+	return err;
+}
diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c
index 7444650..f54a440 100644
--- a/fs/ubifs/recovery.c
+++ b/fs/ubifs/recovery.c
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Adrian Hunter
  *          Artem Bityutskiy (Битюцкий Артём)
@@ -23,13 +12,37 @@
 /*
  * This file implements functions needed to recover from unclean un-mounts.
  * When UBIFS is mounted, it checks a flag on the master node to determine if
- * an un-mount was completed sucessfully. If not, the process of mounting
- * incorparates additional checking and fixing of on-flash data structures.
+ * an un-mount was completed successfully. If not, the process of mounting
+ * incorporates additional checking and fixing of on-flash data structures.
  * UBIFS always cleans away all remnants of an unclean un-mount, so that
  * errors do not accumulate. However UBIFS defers recovery if it is mounted
  * read-only, and the flash is not modified in that case.
+ *
+ * The general UBIFS approach to the recovery is that it recovers from
+ * corruptions which could be caused by power cuts, but it refuses to recover
+ * from corruption caused by other reasons. And UBIFS tries to distinguish
+ * between these 2 reasons of corruptions and silently recover in the former
+ * case and loudly complain in the latter case.
+ *
+ * UBIFS writes only to erased LEBs, so it writes only to the flash space
+ * containing only 0xFFs. UBIFS also always writes strictly from the beginning
+ * of the LEB to the end. And UBIFS assumes that the underlying flash media
+ * writes in @c->max_write_size bytes at a time.
+ *
+ * Hence, if UBIFS finds a corrupted node at offset X, it expects only the min.
+ * I/O unit corresponding to offset X to contain corrupted data, all the
+ * following min. I/O units have to contain empty space (all 0xFFs). If this is
+ * not true, the corruption cannot be the result of a power cut, and UBIFS
+ * refuses to mount.
  */
 
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/crc32.h>
+#include <linux/slab.h>
+#else
+#include <linux/err.h>
+#endif
 #include "ubifs.h"
 
 /**
@@ -52,6 +65,25 @@ static int is_empty(void *buf, int len)
 }
 
 /**
+ * first_non_ff - find offset of the first non-0xff byte.
+ * @buf: buffer to search in
+ * @len: length of buffer
+ *
+ * This function returns offset of the first non-0xff byte in @buf or %-1 if
+ * the buffer contains only 0xff bytes.
+ */
+static int first_non_ff(void *buf, int len)
+{
+	uint8_t *p = buf;
+	int i;
+
+	for (i = 0; i < len; i++)
+		if (*p++ != 0xff)
+			return i;
+	return -1;
+}
+
+/**
  * get_master_node - get the last valid master node allowing for corruption.
  * @c: UBIFS file-system description object
  * @lnum: LEB number
@@ -79,7 +111,7 @@ static int get_master_node(const struct ubifs_info *c, int lnum, void **pbuf,
 	if (!sbuf)
 		return -ENOMEM;
 
-	err = ubi_read(c->ubi, lnum, sbuf, 0, c->leb_size);
+	err = ubifs_leb_read(c, lnum, sbuf, 0, c->leb_size, 0);
 	if (err && err != -EBADMSG)
 		goto out_free;
 
@@ -175,10 +207,10 @@ static int write_rcvrd_mst_node(struct ubifs_info *c,
 	mst->flags |= cpu_to_le32(UBIFS_MST_RCVRY);
 
 	ubifs_prepare_node(c, mst, UBIFS_MST_NODE_SZ, 1);
-	err = ubi_leb_change(c->ubi, lnum, mst, sz, UBI_SHORTTERM);
+	err = ubifs_leb_change(c, lnum, mst, sz);
 	if (err)
 		goto out;
-	err = ubi_leb_change(c->ubi, lnum + 1, mst, sz, UBI_SHORTTERM);
+	err = ubifs_leb_change(c, lnum + 1, mst, sz);
 	if (err)
 		goto out;
 out:
@@ -236,7 +268,8 @@ int ubifs_recover_master_node(struct ubifs_info *c)
 				if (cor1)
 					goto out_err;
 				mst = mst1;
-			} else if (offs1 == 0 && offs2 + sz >= c->leb_size) {
+			} else if (offs1 == 0 &&
+				   c->leb_size - offs2 - sz < sz) {
 				/* 1st LEB was unmapped and written, 2nd not */
 				if (cor1)
 					goto out_err;
@@ -266,12 +299,12 @@ int ubifs_recover_master_node(struct ubifs_info *c)
 		mst = mst2;
 	}
 
-	dbg_rcvry("recovered master node from LEB %d",
+	ubifs_msg("recovered master node from LEB %d",
 		  (mst == mst1 ? UBIFS_MST_LNUM : UBIFS_MST_LNUM + 1));
 
 	memcpy(c->mst_node, mst, UBIFS_MST_NODE_SZ);
 
-	if ((c->vfs_sb->s_flags & MS_RDONLY)) {
+	if (c->ro_mount) {
 		/* Read-only mode. Keep a copy for switching to rw mode */
 		c->rcvrd_mst_node = kmalloc(sz, GFP_KERNEL);
 		if (!c->rcvrd_mst_node) {
@@ -279,6 +312,40 @@ int ubifs_recover_master_node(struct ubifs_info *c)
 			goto out_free;
 		}
 		memcpy(c->rcvrd_mst_node, c->mst_node, UBIFS_MST_NODE_SZ);
+
+		/*
+		 * We had to recover the master node, which means there was an
+		 * unclean reboot. However, it is possible that the master node
+		 * is clean at this point, i.e., %UBIFS_MST_DIRTY is not set.
+		 * E.g., consider the following chain of events:
+		 *
+		 * 1. UBIFS was cleanly unmounted, so the master node is clean
+		 * 2. UBIFS is being mounted R/W and starts changing the master
+		 *    node in the first (%UBIFS_MST_LNUM). A power cut happens,
+		 *    so this LEB ends up with some amount of garbage at the
+		 *    end.
+		 * 3. UBIFS is being mounted R/O. We reach this place and
+		 *    recover the master node from the second LEB
+		 *    (%UBIFS_MST_LNUM + 1). But we cannot update the media
+		 *    because we are being mounted R/O. We have to defer the
+		 *    operation.
+		 * 4. However, this master node (@c->mst_node) is marked as
+		 *    clean (since the step 1). And if we just return, the
+		 *    mount code will be confused and won't recover the master
+		 *    node when it is re-mounter R/W later.
+		 *
+		 *    Thus, to force the recovery by marking the master node as
+		 *    dirty.
+		 */
+		c->mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY);
+#ifndef __UBOOT__
+	} else {
+		/* Write the recovered master node */
+		c->max_sqnum = le64_to_cpu(mst->ch.sqnum) - 1;
+		err = write_rcvrd_mst_node(c, c->mst_node);
+		if (err)
+			goto out_free;
+#endif
 	}
 
 	vfree(buf2);
@@ -291,12 +358,12 @@ out_err:
 out_free:
 	ubifs_err("failed to recover master node");
 	if (mst1) {
-		dbg_err("dumping first master node");
-		dbg_dump_node(c, mst1);
+		ubifs_err("dumping first master node");
+		ubifs_dump_node(c, mst1);
 	}
 	if (mst2) {
-		dbg_err("dumping second master node");
-		dbg_dump_node(c, mst2);
+		ubifs_err("dumping second master node");
+		ubifs_dump_node(c, mst2);
 	}
 	vfree(buf2);
 	vfree(buf1);
@@ -335,44 +402,23 @@ int ubifs_write_rcvrd_mst_node(struct ubifs_info *c)
  * @offs: offset to check
  *
  * This function returns %1 if @offs was in the last write to the LEB whose data
- * is in @buf, otherwise %0 is returned.  The determination is made by checking
- * for subsequent empty space starting from the next min_io_size boundary (or a
- * bit less than the common header size if min_io_size is one).
+ * is in @buf, otherwise %0 is returned. The determination is made by checking
+ * for subsequent empty space starting from the next @c->max_write_size
+ * boundary.
  */
 static int is_last_write(const struct ubifs_info *c, void *buf, int offs)
 {
-	int empty_offs;
-	int check_len;
+	int empty_offs, check_len;
 	uint8_t *p;
 
-	if (c->min_io_size == 1) {
-		check_len = c->leb_size - offs;
-		p = buf + check_len;
-		for (; check_len > 0; check_len--)
-			if (*--p != 0xff)
-				break;
-		/*
-		 * 'check_len' is the size of the corruption which cannot be
-		 * more than the size of 1 node if it was caused by an unclean
-		 * unmount.
-		 */
-		if (check_len > UBIFS_MAX_NODE_SZ)
-			return 0;
-		return 1;
-	}
-
 	/*
-	 * Round up to the next c->min_io_size boundary i.e. 'offs' is in the
-	 * last wbuf written. After that should be empty space.
+	 * Round up to the next @c->max_write_size boundary i.e. @offs is in
+	 * the last wbuf written. After that should be empty space.
 	 */
-	empty_offs = ALIGN(offs + 1, c->min_io_size);
+	empty_offs = ALIGN(offs + 1, c->max_write_size);
 	check_len = c->leb_size - empty_offs;
 	p = buf + empty_offs - offs;
-
-	for (; check_len > 0; check_len--)
-		if (*p++ != 0xff)
-			return 0;
-	return 1;
+	return is_empty(p, check_len);
 }
 
 /**
@@ -385,7 +431,7 @@ static int is_last_write(const struct ubifs_info *c, void *buf, int offs)
  *
  * This function pads up to the next min_io_size boundary (if there is one) and
  * sets empty space to all 0xff. @buf, @offs and @len are updated to the next
- * min_io_size boundary (if there is one).
+ * @c->min_io_size boundary.
  */
 static void clean_buf(const struct ubifs_info *c, void **buf, int lnum,
 		      int *offs, int *len)
@@ -395,11 +441,6 @@ static void clean_buf(const struct ubifs_info *c, void **buf, int lnum,
 	lnum = lnum;
 	dbg_rcvry("cleaning corruption at %d:%d", lnum, *offs);
 
-	if (c->min_io_size == 1) {
-		memset(*buf, 0xff, c->leb_size - *offs);
-		return;
-	}
-
 	ubifs_assert(!(*offs & 7));
 	empty_offs = ALIGN(*offs, c->min_io_size);
 	pad_len = empty_offs - *offs;
@@ -429,7 +470,7 @@ static int no_more_nodes(const struct ubifs_info *c, void *buf, int len,
 	int skip, dlen = le32_to_cpu(ch->len);
 
 	/* Check for empty space after the corrupt node's common header */
-	skip = ALIGN(offs + UBIFS_CH_SZ, c->min_io_size) - offs;
+	skip = ALIGN(offs + UBIFS_CH_SZ, c->max_write_size) - offs;
 	if (is_empty(buf + skip, len - skip))
 		return 1;
 	/*
@@ -441,7 +482,7 @@ static int no_more_nodes(const struct ubifs_info *c, void *buf, int len,
 		return 0;
 	}
 	/* Now we know the corrupt node's length we can skip over it */
-	skip = ALIGN(offs + dlen, c->min_io_size) - offs;
+	skip = ALIGN(offs + dlen, c->max_write_size) - offs;
 	/* After which there should be empty space */
 	if (is_empty(buf + skip, len - skip))
 		return 1;
@@ -469,7 +510,7 @@ static int fix_unclean_leb(struct ubifs_info *c, struct ubifs_scan_leb *sleb,
 		endpt = snod->offs + snod->len;
 	}
 
-	if ((c->vfs_sb->s_flags & MS_RDONLY) && !c->remounting_rw) {
+	if (c->ro_mount && !c->remounting_rw) {
 		/* Add to recovery list */
 		struct ubifs_unclean_leb *ucleb;
 
@@ -481,21 +522,55 @@ static int fix_unclean_leb(struct ubifs_info *c, struct ubifs_scan_leb *sleb,
 		ucleb->lnum = lnum;
 		ucleb->endpt = endpt;
 		list_add_tail(&ucleb->list, &c->unclean_leb_list);
+#ifndef __UBOOT__
+	} else {
+		/* Write the fixed LEB back to flash */
+		int err;
+
+		dbg_rcvry("fixing LEB %d start %d endpt %d",
+			  lnum, start, sleb->endpt);
+		if (endpt == 0) {
+			err = ubifs_leb_unmap(c, lnum);
+			if (err)
+				return err;
+		} else {
+			int len = ALIGN(endpt, c->min_io_size);
+
+			if (start) {
+				err = ubifs_leb_read(c, lnum, sleb->buf, 0,
+						     start, 1);
+				if (err)
+					return err;
+			}
+			/* Pad to min_io_size */
+			if (len > endpt) {
+				int pad_len = len - ALIGN(endpt, 8);
+
+				if (pad_len > 0) {
+					void *buf = sleb->buf + len - pad_len;
+
+					ubifs_pad(c, buf, pad_len);
+				}
+			}
+			err = ubifs_leb_change(c, lnum, sleb->buf, len);
+			if (err)
+				return err;
+		}
+#endif
 	}
 	return 0;
 }
 
 /**
- * drop_incomplete_group - drop nodes from an incomplete group.
+ * drop_last_group - drop the last group of nodes.
  * @sleb: scanned LEB information
  * @offs: offset of dropped nodes is returned here
  *
- * This function returns %1 if nodes are dropped and %0 otherwise.
+ * This is a helper function for 'ubifs_recover_leb()' which drops the last
+ * group of nodes of the scanned LEB.
  */
-static int drop_incomplete_group(struct ubifs_scan_leb *sleb, int *offs)
+static void drop_last_group(struct ubifs_scan_leb *sleb, int *offs)
 {
-	int dropped = 0;
-
 	while (!list_empty(&sleb->nodes)) {
 		struct ubifs_scan_node *snod;
 		struct ubifs_ch *ch;
@@ -504,15 +579,41 @@ static int drop_incomplete_group(struct ubifs_scan_leb *sleb, int *offs)
 				  list);
 		ch = snod->node;
 		if (ch->group_type != UBIFS_IN_NODE_GROUP)
-			return dropped;
-		dbg_rcvry("dropping node at %d:%d", sleb->lnum, snod->offs);
+			break;
+
+		dbg_rcvry("dropping grouped node at %d:%d",
+			  sleb->lnum, snod->offs);
+		*offs = snod->offs;
+		list_del(&snod->list);
+		kfree(snod);
+		sleb->nodes_cnt -= 1;
+	}
+}
+
+/**
+ * drop_last_node - drop the last node.
+ * @sleb: scanned LEB information
+ * @offs: offset of dropped nodes is returned here
+ * @grouped: non-zero if whole group of nodes have to be dropped
+ *
+ * This is a helper function for 'ubifs_recover_leb()' which drops the last
+ * node of the scanned LEB.
+ */
+static void drop_last_node(struct ubifs_scan_leb *sleb, int *offs)
+{
+	struct ubifs_scan_node *snod;
+
+	if (!list_empty(&sleb->nodes)) {
+		snod = list_entry(sleb->nodes.prev, struct ubifs_scan_node,
+				  list);
+
+		dbg_rcvry("dropping last node at %d:%d",
+			  sleb->lnum, snod->offs);
 		*offs = snod->offs;
 		list_del(&snod->list);
 		kfree(snod);
 		sleb->nodes_cnt -= 1;
-		dropped = 1;
 	}
-	return dropped;
 }
 
 /**
@@ -521,33 +622,30 @@ static int drop_incomplete_group(struct ubifs_scan_leb *sleb, int *offs)
  * @lnum: LEB number
  * @offs: offset
  * @sbuf: LEB-sized buffer to use
- * @grouped: nodes may be grouped for recovery
+ * @jhead: journal head number this LEB belongs to (%-1 if the LEB does not
+ *         belong to any journal head)
  *
  * This function does a scan of a LEB, but caters for errors that might have
  * been caused by the unclean unmount from which we are attempting to recover.
- *
- * This function returns %0 on success and a negative error code on failure.
+ * Returns %0 in case of success, %-EUCLEAN if an unrecoverable corruption is
+ * found, and a negative error code in case of failure.
  */
 struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum,
-					 int offs, void *sbuf, int grouped)
+					 int offs, void *sbuf, int jhead)
 {
-	int err, len = c->leb_size - offs, need_clean = 0, quiet = 1;
-	int empty_chkd = 0, start = offs;
+	int ret = 0, err, len = c->leb_size - offs, start = offs, min_io_unit;
+	int grouped = jhead == -1 ? 0 : c->jheads[jhead].grouped;
 	struct ubifs_scan_leb *sleb;
 	void *buf = sbuf + offs;
 
-	dbg_rcvry("%d:%d", lnum, offs);
+	dbg_rcvry("%d:%d, jhead %d, grouped %d", lnum, offs, jhead, grouped);
 
 	sleb = ubifs_start_scan(c, lnum, offs, sbuf);
 	if (IS_ERR(sleb))
 		return sleb;
 
-	if (sleb->ecc)
-		need_clean = 1;
-
+	ubifs_assert(len >= 8);
 	while (len >= 8) {
-		int ret;
-
 		dbg_scan("look at LEB %d:%d (%d bytes left)",
 			 lnum, offs, len);
 
@@ -557,8 +655,7 @@ struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum,
 		 * Scan quietly until there is an error from which we cannot
 		 * recover
 		 */
-		ret = ubifs_scan_a_node(c, buf, len, lnum, offs, quiet);
-
+		ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 1);
 		if (ret == SCANNED_A_NODE) {
 			/* A valid node, and not a padding node */
 			struct ubifs_ch *ch = buf;
@@ -571,98 +668,127 @@ struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum,
 			offs += node_len;
 			buf += node_len;
 			len -= node_len;
-			continue;
-		}
-
-		if (ret > 0) {
+		} else if (ret > 0) {
 			/* Padding bytes or a valid padding node */
 			offs += ret;
 			buf += ret;
 			len -= ret;
-			continue;
-		}
-
-		if (ret == SCANNED_EMPTY_SPACE) {
-			if (!is_empty(buf, len)) {
-				if (!is_last_write(c, buf, offs))
-					break;
-				clean_buf(c, &buf, lnum, &offs, &len);
-				need_clean = 1;
-			}
-			empty_chkd = 1;
+		} else if (ret == SCANNED_EMPTY_SPACE ||
+			   ret == SCANNED_GARBAGE     ||
+			   ret == SCANNED_A_BAD_PAD_NODE ||
+			   ret == SCANNED_A_CORRUPT_NODE) {
+			dbg_rcvry("found corruption (%d) at %d:%d",
+				  ret, lnum, offs);
 			break;
+		} else {
+			ubifs_err("unexpected return value %d", ret);
+			err = -EINVAL;
+			goto error;
 		}
+	}
 
-		if (ret == SCANNED_GARBAGE || ret == SCANNED_A_BAD_PAD_NODE)
-			if (is_last_write(c, buf, offs)) {
-				clean_buf(c, &buf, lnum, &offs, &len);
-				need_clean = 1;
-				empty_chkd = 1;
-				break;
-			}
-
-		if (ret == SCANNED_A_CORRUPT_NODE)
-			if (no_more_nodes(c, buf, len, lnum, offs)) {
-				clean_buf(c, &buf, lnum, &offs, &len);
-				need_clean = 1;
-				empty_chkd = 1;
-				break;
-			}
-
-		if (quiet) {
-			/* Redo the last scan but noisily */
-			quiet = 0;
-			continue;
-		}
+	if (ret == SCANNED_GARBAGE || ret == SCANNED_A_BAD_PAD_NODE) {
+		if (!is_last_write(c, buf, offs))
+			goto corrupted_rescan;
+	} else if (ret == SCANNED_A_CORRUPT_NODE) {
+		if (!no_more_nodes(c, buf, len, lnum, offs))
+			goto corrupted_rescan;
+	} else if (!is_empty(buf, len)) {
+		if (!is_last_write(c, buf, offs)) {
+			int corruption = first_non_ff(buf, len);
 
-		switch (ret) {
-		case SCANNED_GARBAGE:
-			dbg_err("garbage");
-			goto corrupted;
-		case SCANNED_A_CORRUPT_NODE:
-		case SCANNED_A_BAD_PAD_NODE:
-			dbg_err("bad node");
-			goto corrupted;
-		default:
-			dbg_err("unknown");
+			/*
+			 * See header comment for this file for more
+			 * explanations about the reasons we have this check.
+			 */
+			ubifs_err("corrupt empty space LEB %d:%d, corruption starts at %d",
+				  lnum, offs, corruption);
+			/* Make sure we dump interesting non-0xFF data */
+			offs += corruption;
+			buf += corruption;
 			goto corrupted;
 		}
 	}
 
-	if (!empty_chkd && !is_empty(buf, len)) {
-		if (is_last_write(c, buf, offs)) {
-			clean_buf(c, &buf, lnum, &offs, &len);
-			need_clean = 1;
-		} else {
-			ubifs_err("corrupt empty space at LEB %d:%d",
-				  lnum, offs);
-			goto corrupted;
-		}
-	}
+	min_io_unit = round_down(offs, c->min_io_size);
+	if (grouped)
+		/*
+		 * If nodes are grouped, always drop the incomplete group at
+		 * the end.
+		 */
+		drop_last_group(sleb, &offs);
 
-	/* Drop nodes from incomplete group */
-	if (grouped && drop_incomplete_group(sleb, &offs)) {
-		buf = sbuf + offs;
-		len = c->leb_size - offs;
-		clean_buf(c, &buf, lnum, &offs, &len);
-		need_clean = 1;
+	if (jhead == GCHD) {
+		/*
+		 * If this LEB belongs to the GC head then while we are in the
+		 * middle of the same min. I/O unit keep dropping nodes. So
+		 * basically, what we want is to make sure that the last min.
+		 * I/O unit where we saw the corruption is dropped completely
+		 * with all the uncorrupted nodes which may possibly sit there.
+		 *
+		 * In other words, let's name the min. I/O unit where the
+		 * corruption starts B, and the previous min. I/O unit A. The
+		 * below code tries to deal with a situation when half of B
+		 * contains valid nodes or the end of a valid node, and the
+		 * second half of B contains corrupted data or garbage. This
+		 * means that UBIFS had been writing to B just before the power
+		 * cut happened. I do not know how realistic is this scenario
+		 * that half of the min. I/O unit had been written successfully
+		 * and the other half not, but this is possible in our 'failure
+		 * mode emulation' infrastructure at least.
+		 *
+		 * So what is the problem, why we need to drop those nodes? Why
+		 * can't we just clean-up the second half of B by putting a
+		 * padding node there? We can, and this works fine with one
+		 * exception which was reproduced with power cut emulation
+		 * testing and happens extremely rarely.
+		 *
+		 * Imagine the file-system is full, we run GC which starts
+		 * moving valid nodes from LEB X to LEB Y (obviously, LEB Y is
+		 * the current GC head LEB). The @c->gc_lnum is -1, which means
+		 * that GC will retain LEB X and will try to continue. Imagine
+		 * that LEB X is currently the dirtiest LEB, and the amount of
+		 * used space in LEB Y is exactly the same as amount of free
+		 * space in LEB X.
+		 *
+		 * And a power cut happens when nodes are moved from LEB X to
+		 * LEB Y. We are here trying to recover LEB Y which is the GC
+		 * head LEB. We find the min. I/O unit B as described above.
+		 * Then we clean-up LEB Y by padding min. I/O unit. And later
+		 * 'ubifs_rcvry_gc_commit()' function fails, because it cannot
+		 * find a dirty LEB which could be GC'd into LEB Y! Even LEB X
+		 * does not match because the amount of valid nodes there does
+		 * not fit the free space in LEB Y any more! And this is
+		 * because of the padding node which we added to LEB Y. The
+		 * user-visible effect of this which I once observed and
+		 * analysed is that we cannot mount the file-system with
+		 * -ENOSPC error.
+		 *
+		 * So obviously, to make sure that situation does not happen we
+		 * should free min. I/O unit B in LEB Y completely and the last
+		 * used min. I/O unit in LEB Y should be A. This is basically
+		 * what the below code tries to do.
+		 */
+		while (offs > min_io_unit)
+			drop_last_node(sleb, &offs);
 	}
 
-	if (offs % c->min_io_size) {
-		clean_buf(c, &buf, lnum, &offs, &len);
-		need_clean = 1;
-	}
+	buf = sbuf + offs;
+	len = c->leb_size - offs;
 
+	clean_buf(c, &buf, lnum, &offs, &len);
 	ubifs_end_scan(c, sleb, lnum, offs);
 
-	if (need_clean) {
-		err = fix_unclean_leb(c, sleb, start);
-		if (err)
-			goto error;
-	}
+	err = fix_unclean_leb(c, sleb, start);
+	if (err)
+		goto error;
 
 	return sleb;
 
+corrupted_rescan:
+	/* Re-scan the corrupted data with verbose messages */
+	ubifs_err("corruption %d", ret);
+	ubifs_scan_a_node(c, buf, len, lnum, offs, 1);
 corrupted:
 	ubifs_scanned_corruption(c, lnum, offs, buf);
 	err = -EUCLEAN;
@@ -693,22 +819,23 @@ static int get_cs_sqnum(struct ubifs_info *c, int lnum, int offs,
 		return -ENOMEM;
 	if (c->leb_size - offs < UBIFS_CS_NODE_SZ)
 		goto out_err;
-	err = ubi_read(c->ubi, lnum, (void *)cs_node, offs, UBIFS_CS_NODE_SZ);
+	err = ubifs_leb_read(c, lnum, (void *)cs_node, offs,
+			     UBIFS_CS_NODE_SZ, 0);
 	if (err && err != -EBADMSG)
 		goto out_free;
 	ret = ubifs_scan_a_node(c, cs_node, UBIFS_CS_NODE_SZ, lnum, offs, 0);
 	if (ret != SCANNED_A_NODE) {
-		dbg_err("Not a valid node");
+		ubifs_err("Not a valid node");
 		goto out_err;
 	}
 	if (cs_node->ch.node_type != UBIFS_CS_NODE) {
-		dbg_err("Node a CS node, type is %d", cs_node->ch.node_type);
+		ubifs_err("Node a CS node, type is %d", cs_node->ch.node_type);
 		goto out_err;
 	}
 	if (le64_to_cpu(cs_node->cmt_no) != c->cmt_no) {
-		dbg_err("CS node cmt_no %llu != current cmt_no %llu",
-			(unsigned long long)le64_to_cpu(cs_node->cmt_no),
-			c->cmt_no);
+		ubifs_err("CS node cmt_no %llu != current cmt_no %llu",
+			  (unsigned long long)le64_to_cpu(cs_node->cmt_no),
+			  c->cmt_no);
 		goto out_err;
 	}
 	*cs_sqnum = le64_to_cpu(cs_node->ch.sqnum);
@@ -732,7 +859,8 @@ out_free:
  * @sbuf: LEB-sized buffer to use
  *
  * This function does a scan of a LEB, but caters for errors that might have
- * been caused by the unclean unmount from which we are attempting to recover.
+ * been caused by unclean reboots from which we are attempting to recover
+ * (assume that only the last log LEB can be corrupted by an unclean reboot).
  *
  * This function returns %0 on success and a negative error code on failure.
  */
@@ -751,7 +879,7 @@ struct ubifs_scan_leb *ubifs_recover_log_leb(struct ubifs_info *c, int lnum,
 		 * We can only recover at the end of the log, so check that the
 		 * next log LEB is empty or out of date.
 		 */
-		sleb = ubifs_scan(c, next_lnum, 0, sbuf);
+		sleb = ubifs_scan(c, next_lnum, 0, sbuf, 0);
 		if (IS_ERR(sleb))
 			return sleb;
 		if (sleb->nodes_cnt) {
@@ -770,15 +898,15 @@ struct ubifs_scan_leb *ubifs_recover_log_leb(struct ubifs_info *c, int lnum,
 				}
 			}
 			if (snod->sqnum > cs_sqnum) {
-				ubifs_err("unrecoverable log corruption "
-					  "in LEB %d", lnum);
+				ubifs_err("unrecoverable log corruption in LEB %d",
+					  lnum);
 				ubifs_scan_destroy(sleb);
 				return ERR_PTR(-EUCLEAN);
 			}
 		}
 		ubifs_scan_destroy(sleb);
 	}
-	return ubifs_recover_leb(c, lnum, offs, sbuf, 0);
+	return ubifs_recover_leb(c, lnum, offs, sbuf, -1);
 }
 
 /**
@@ -792,15 +920,10 @@ struct ubifs_scan_leb *ubifs_recover_log_leb(struct ubifs_info *c, int lnum,
  *
  * This function returns %0 on success and a negative error code on failure.
  */
-static int recover_head(const struct ubifs_info *c, int lnum, int offs,
-			void *sbuf)
+static int recover_head(struct ubifs_info *c, int lnum, int offs, void *sbuf)
 {
-	int len, err, need_clean = 0;
+	int len = c->max_write_size, err;
 
-	if (c->min_io_size > 1)
-		len = c->min_io_size;
-	else
-		len = 512;
 	if (offs + len > c->leb_size)
 		len = c->leb_size - offs;
 
@@ -808,27 +931,15 @@ static int recover_head(const struct ubifs_info *c, int lnum, int offs,
 		return 0;
 
 	/* Read at the head location and check it is empty flash */
-	err = ubi_read(c->ubi, lnum, sbuf, offs, len);
-	if (err)
-		need_clean = 1;
-	else {
-		uint8_t *p = sbuf;
-
-		while (len--)
-			if (*p++ != 0xff) {
-				need_clean = 1;
-				break;
-			}
-	}
-
-	if (need_clean) {
+	err = ubifs_leb_read(c, lnum, sbuf, offs, len, 1);
+	if (err || !is_empty(sbuf, len)) {
 		dbg_rcvry("cleaning head at %d:%d", lnum, offs);
 		if (offs == 0)
 			return ubifs_leb_unmap(c, lnum);
-		err = ubi_read(c->ubi, lnum, sbuf, 0, offs);
+		err = ubifs_leb_read(c, lnum, sbuf, 0, offs, 1);
 		if (err)
 			return err;
-		return ubi_leb_change(c->ubi, lnum, sbuf, offs, UBI_UNKNOWN);
+		return ubifs_leb_change(c, lnum, sbuf, offs);
 	}
 
 	return 0;
@@ -851,11 +962,11 @@ static int recover_head(const struct ubifs_info *c, int lnum, int offs,
  *
  * This function returns %0 on success and a negative error code on failure.
  */
-int ubifs_recover_inl_heads(const struct ubifs_info *c, void *sbuf)
+int ubifs_recover_inl_heads(struct ubifs_info *c, void *sbuf)
 {
 	int err;
 
-	ubifs_assert(!(c->vfs_sb->s_flags & MS_RDONLY) || c->remounting_rw);
+	ubifs_assert(!c->ro_mount || c->remounting_rw);
 
 	dbg_rcvry("checking index head at %d:%d", c->ihead_lnum, c->ihead_offs);
 	err = recover_head(c, c->ihead_lnum, c->ihead_offs, sbuf);
@@ -871,7 +982,7 @@ int ubifs_recover_inl_heads(const struct ubifs_info *c, void *sbuf)
 }
 
 /**
- *  clean_an_unclean_leb - read and write a LEB to remove corruption.
+ * clean_an_unclean_leb - read and write a LEB to remove corruption.
  * @c: UBIFS file-system description object
  * @ucleb: unclean LEB information
  * @sbuf: LEB-sized buffer to use
@@ -882,7 +993,7 @@ int ubifs_recover_inl_heads(const struct ubifs_info *c, void *sbuf)
  *
  * This function returns %0 on success and a negative error code on failure.
  */
-static int clean_an_unclean_leb(const struct ubifs_info *c,
+static int clean_an_unclean_leb(struct ubifs_info *c,
 				struct ubifs_unclean_leb *ucleb, void *sbuf)
 {
 	int err, lnum = ucleb->lnum, offs = 0, len = ucleb->endpt, quiet = 1;
@@ -898,7 +1009,7 @@ static int clean_an_unclean_leb(const struct ubifs_info *c,
 		return 0;
 	}
 
-	err = ubi_read(c->ubi, lnum, buf, offs, len);
+	err = ubifs_leb_read(c, lnum, buf, offs, len, 0);
 	if (err && err != -EBADMSG)
 		return err;
 
@@ -958,7 +1069,7 @@ static int clean_an_unclean_leb(const struct ubifs_info *c,
 	}
 
 	/* Write back the LEB atomically */
-	err = ubi_leb_change(c->ubi, lnum, sbuf, len, UBI_UNKNOWN);
+	err = ubifs_leb_change(c, lnum, sbuf, len);
 	if (err)
 		return err;
 
@@ -978,7 +1089,7 @@ static int clean_an_unclean_leb(const struct ubifs_info *c,
  *
  * This function returns %0 on success and a negative error code on failure.
  */
-int ubifs_clean_lebs(const struct ubifs_info *c, void *sbuf)
+int ubifs_clean_lebs(struct ubifs_info *c, void *sbuf)
 {
 	dbg_rcvry("recovery");
 	while (!list_empty(&c->unclean_leb_list)) {
@@ -996,6 +1107,140 @@ int ubifs_clean_lebs(const struct ubifs_info *c, void *sbuf)
 	return 0;
 }
 
+#ifndef __UBOOT__
+/**
+ * grab_empty_leb - grab an empty LEB to use as GC LEB and run commit.
+ * @c: UBIFS file-system description object
+ *
+ * This is a helper function for 'ubifs_rcvry_gc_commit()' which grabs an empty
+ * LEB to be used as GC LEB (@c->gc_lnum), and then runs the commit. Returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+static int grab_empty_leb(struct ubifs_info *c)
+{
+	int lnum, err;
+
+	/*
+	 * Note, it is very important to first search for an empty LEB and then
+	 * run the commit, not vice-versa. The reason is that there might be
+	 * only one empty LEB at the moment, the one which has been the
+	 * @c->gc_lnum just before the power cut happened. During the regular
+	 * UBIFS operation (not now) @c->gc_lnum is marked as "taken", so no
+	 * one but GC can grab it. But at this moment this single empty LEB is
+	 * not marked as taken, so if we run commit - what happens? Right, the
+	 * commit will grab it and write the index there. Remember that the
+	 * index always expands as long as there is free space, and it only
+	 * starts consolidating when we run out of space.
+	 *
+	 * IOW, if we run commit now, we might not be able to find a free LEB
+	 * after this.
+	 */
+	lnum = ubifs_find_free_leb_for_idx(c);
+	if (lnum < 0) {
+		ubifs_err("could not find an empty LEB");
+		ubifs_dump_lprops(c);
+		ubifs_dump_budg(c, &c->bi);
+		return lnum;
+	}
+
+	/* Reset the index flag */
+	err = ubifs_change_one_lp(c, lnum, LPROPS_NC, LPROPS_NC, 0,
+				  LPROPS_INDEX, 0);
+	if (err)
+		return err;
+
+	c->gc_lnum = lnum;
+	dbg_rcvry("found empty LEB %d, run commit", lnum);
+
+	return ubifs_run_commit(c);
+}
+
+/**
+ * ubifs_rcvry_gc_commit - recover the GC LEB number and run the commit.
+ * @c: UBIFS file-system description object
+ *
+ * Out-of-place garbage collection requires always one empty LEB with which to
+ * start garbage collection. The LEB number is recorded in c->gc_lnum and is
+ * written to the master node on unmounting. In the case of an unclean unmount
+ * the value of gc_lnum recorded in the master node is out of date and cannot
+ * be used. Instead, recovery must allocate an empty LEB for this purpose.
+ * However, there may not be enough empty space, in which case it must be
+ * possible to GC the dirtiest LEB into the GC head LEB.
+ *
+ * This function also runs the commit which causes the TNC updates from
+ * size-recovery and orphans to be written to the flash. That is important to
+ * ensure correct replay order for subsequent mounts.
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+int ubifs_rcvry_gc_commit(struct ubifs_info *c)
+{
+	struct ubifs_wbuf *wbuf = &c->jheads[GCHD].wbuf;
+	struct ubifs_lprops lp;
+	int err;
+
+	dbg_rcvry("GC head LEB %d, offs %d", wbuf->lnum, wbuf->offs);
+
+	c->gc_lnum = -1;
+	if (wbuf->lnum == -1 || wbuf->offs == c->leb_size)
+		return grab_empty_leb(c);
+
+	err = ubifs_find_dirty_leb(c, &lp, wbuf->offs, 2);
+	if (err) {
+		if (err != -ENOSPC)
+			return err;
+
+		dbg_rcvry("could not find a dirty LEB");
+		return grab_empty_leb(c);
+	}
+
+	ubifs_assert(!(lp.flags & LPROPS_INDEX));
+	ubifs_assert(lp.free + lp.dirty >= wbuf->offs);
+
+	/*
+	 * We run the commit before garbage collection otherwise subsequent
+	 * mounts will see the GC and orphan deletion in a different order.
+	 */
+	dbg_rcvry("committing");
+	err = ubifs_run_commit(c);
+	if (err)
+		return err;
+
+	dbg_rcvry("GC'ing LEB %d", lp.lnum);
+	mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
+	err = ubifs_garbage_collect_leb(c, &lp);
+	if (err >= 0) {
+		int err2 = ubifs_wbuf_sync_nolock(wbuf);
+
+		if (err2)
+			err = err2;
+	}
+	mutex_unlock(&wbuf->io_mutex);
+	if (err < 0) {
+		ubifs_err("GC failed, error %d", err);
+		if (err == -EAGAIN)
+			err = -EINVAL;
+		return err;
+	}
+
+	ubifs_assert(err == LEB_RETAINED);
+	if (err != LEB_RETAINED)
+		return -EINVAL;
+
+	err = ubifs_leb_unmap(c, c->gc_lnum);
+	if (err)
+		return err;
+
+	dbg_rcvry("allocated LEB %d for GC", lp.lnum);
+	return 0;
+}
+#else
+int ubifs_rcvry_gc_commit(struct ubifs_info *c)
+{
+	return 0;
+}
+#endif
+
 /**
  * struct size_entry - inode size information for recovery.
  * @rb: link in the RB-tree of sizes
@@ -1090,6 +1335,23 @@ static void remove_ino(struct ubifs_info *c, ino_t inum)
 }
 
 /**
+ * ubifs_destroy_size_tree - free resources related to the size tree.
+ * @c: UBIFS file-system description object
+ */
+void ubifs_destroy_size_tree(struct ubifs_info *c)
+{
+	struct size_entry *e, *n;
+
+	rbtree_postorder_for_each_entry_safe(e, n, &c->size_tree, rb) {
+		if (e->inode)
+			iput(e->inode);
+		kfree(e);
+	}
+
+	c->size_tree = RB_ROOT;
+}
+
+/**
  * ubifs_recover_size_accum - accumulate inode sizes for recovery.
  * @c: UBIFS file-system description object
  * @key: node key
@@ -1157,6 +1419,64 @@ int ubifs_recover_size_accum(struct ubifs_info *c, union ubifs_key *key,
 	return 0;
 }
 
+#ifndef __UBOOT__
+/**
+ * fix_size_in_place - fix inode size in place on flash.
+ * @c: UBIFS file-system description object
+ * @e: inode size information for recovery
+ */
+static int fix_size_in_place(struct ubifs_info *c, struct size_entry *e)
+{
+	struct ubifs_ino_node *ino = c->sbuf;
+	unsigned char *p;
+	union ubifs_key key;
+	int err, lnum, offs, len;
+	loff_t i_size;
+	uint32_t crc;
+
+	/* Locate the inode node LEB number and offset */
+	ino_key_init(c, &key, e->inum);
+	err = ubifs_tnc_locate(c, &key, ino, &lnum, &offs);
+	if (err)
+		goto out;
+	/*
+	 * If the size recorded on the inode node is greater than the size that
+	 * was calculated from nodes in the journal then don't change the inode.
+	 */
+	i_size = le64_to_cpu(ino->size);
+	if (i_size >= e->d_size)
+		return 0;
+	/* Read the LEB */
+	err = ubifs_leb_read(c, lnum, c->sbuf, 0, c->leb_size, 1);
+	if (err)
+		goto out;
+	/* Change the size field and recalculate the CRC */
+	ino = c->sbuf + offs;
+	ino->size = cpu_to_le64(e->d_size);
+	len = le32_to_cpu(ino->ch.len);
+	crc = crc32(UBIFS_CRC32_INIT, (void *)ino + 8, len - 8);
+	ino->ch.crc = cpu_to_le32(crc);
+	/* Work out where data in the LEB ends and free space begins */
+	p = c->sbuf;
+	len = c->leb_size - 1;
+	while (p[len] == 0xff)
+		len -= 1;
+	len = ALIGN(len + 1, c->min_io_size);
+	/* Atomically write the fixed LEB back again */
+	err = ubifs_leb_change(c, lnum, c->sbuf, len);
+	if (err)
+		goto out;
+	dbg_rcvry("inode %lu at %d:%d size %lld -> %lld",
+		  (unsigned long)e->inum, lnum, offs, i_size, e->d_size);
+	return 0;
+
+out:
+	ubifs_warn("inode %lu failed to fix size %lld -> %lld error %d",
+		   (unsigned long)e->inum, e->i_size, e->d_size, err);
+	return err;
+}
+#endif
+
 /**
  * ubifs_recover_size - recover inode size.
  * @c: UBIFS file-system description object
@@ -1196,30 +1516,48 @@ int ubifs_recover_size(struct ubifs_info *c)
 				e->i_size = le64_to_cpu(ino->size);
 			}
 		}
+
 		if (e->exists && e->i_size < e->d_size) {
-			if (!e->inode && (c->vfs_sb->s_flags & MS_RDONLY)) {
+			if (c->ro_mount) {
 				/* Fix the inode size and pin it in memory */
 				struct inode *inode;
+				struct ubifs_inode *ui;
+
+				ubifs_assert(!e->inode);
 
 				inode = ubifs_iget(c->vfs_sb, e->inum);
 				if (IS_ERR(inode))
 					return PTR_ERR(inode);
+
+				ui = ubifs_inode(inode);
 				if (inode->i_size < e->d_size) {
 					dbg_rcvry("ino %lu size %lld -> %lld",
 						  (unsigned long)e->inum,
-						  e->d_size, inode->i_size);
+						  inode->i_size, e->d_size);
 					inode->i_size = e->d_size;
-					ubifs_inode(inode)->ui_size = e->d_size;
+					ui->ui_size = e->d_size;
+					ui->synced_i_size = e->d_size;
 					e->inode = inode;
 					this = rb_next(this);
 					continue;
 				}
 				iput(inode);
+#ifndef __UBOOT__
+			} else {
+				/* Fix the size in place */
+				err = fix_size_in_place(c, e);
+				if (err)
+					return err;
+				if (e->inode)
+					iput(e->inode);
+#endif
 			}
 		}
+
 		this = rb_next(this);
 		rb_erase(&e->rb, &c->size_tree);
 		kfree(e);
 	}
+
 	return 0;
 }
diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c
index da33a14..6393b15 100644
--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Adrian Hunter
  *          Artem Bityutskiy (Битюцкий Артём)
@@ -32,44 +21,38 @@
  * larger is the journal, the more memory its index may consume.
  */
 
+#define __UBOOT__
+#ifdef __UBOOT__
+#include <linux/compat.h>
+#include <linux/err.h>
+#endif
 #include "ubifs.h"
-
-/*
- * Replay flags.
- *
- * REPLAY_DELETION: node was deleted
- * REPLAY_REF: node is a reference node
- */
-enum {
-	REPLAY_DELETION = 1,
-	REPLAY_REF = 2,
-};
+#include <linux/list_sort.h>
 
 /**
- * struct replay_entry - replay tree entry.
+ * struct replay_entry - replay list entry.
  * @lnum: logical eraseblock number of the node
  * @offs: node offset
  * @len: node length
+ * @deletion: non-zero if this entry corresponds to a node deletion
  * @sqnum: node sequence number
- * @flags: replay flags
- * @rb: links the replay tree
+ * @list: links the replay list
  * @key: node key
  * @nm: directory entry name
  * @old_size: truncation old size
  * @new_size: truncation new size
- * @free: amount of free space in a bud
- * @dirty: amount of dirty space in a bud from padding and deletion nodes
  *
- * UBIFS journal replay must compare node sequence numbers, which means it must
- * build a tree of node information to insert into the TNC.
+ * The replay process first scans all buds and builds the replay list, then
+ * sorts the replay list in nodes sequence number order, and then inserts all
+ * the replay entries to the TNC.
  */
 struct replay_entry {
 	int lnum;
 	int offs;
 	int len;
+	unsigned int deletion:1;
 	unsigned long long sqnum;
-	int flags;
-	struct rb_node rb;
+	struct list_head list;
 	union ubifs_key key;
 	union {
 		struct qstr nm;
@@ -77,10 +60,6 @@ struct replay_entry {
 			loff_t old_size;
 			loff_t new_size;
 		};
-		struct {
-			int free;
-			int dirty;
-		};
 	};
 };
 
@@ -88,83 +67,117 @@ struct replay_entry {
  * struct bud_entry - entry in the list of buds to replay.
  * @list: next bud in the list
  * @bud: bud description object
- * @free: free bytes in the bud
  * @sqnum: reference node sequence number
+ * @free: free bytes in the bud
+ * @dirty: dirty bytes in the bud
  */
 struct bud_entry {
 	struct list_head list;
 	struct ubifs_bud *bud;
-	int free;
 	unsigned long long sqnum;
+	int free;
+	int dirty;
 };
 
+#ifndef __UBOOT__
 /**
  * set_bud_lprops - set free and dirty space used by a bud.
  * @c: UBIFS file-system description object
- * @r: replay entry of bud
+ * @b: bud entry which describes the bud
+ *
+ * This function makes sure the LEB properties of bud @b are set correctly
+ * after the replay. Returns zero in case of success and a negative error code
+ * in case of failure.
  */
-static int set_bud_lprops(struct ubifs_info *c, struct replay_entry *r)
+static int set_bud_lprops(struct ubifs_info *c, struct bud_entry *b)
 {
 	const struct ubifs_lprops *lp;
 	int err = 0, dirty;
 
 	ubifs_get_lprops(c);
 
-	lp = ubifs_lpt_lookup_dirty(c, r->lnum);
+	lp = ubifs_lpt_lookup_dirty(c, b->bud->lnum);
 	if (IS_ERR(lp)) {
 		err = PTR_ERR(lp);
 		goto out;
 	}
 
 	dirty = lp->dirty;
-	if (r->offs == 0 && (lp->free != c->leb_size || lp->dirty != 0)) {
+	if (b->bud->start == 0 && (lp->free != c->leb_size || lp->dirty != 0)) {
 		/*
 		 * The LEB was added to the journal with a starting offset of
 		 * zero which means the LEB must have been empty. The LEB
-		 * property values should be lp->free == c->leb_size and
-		 * lp->dirty == 0, but that is not the case. The reason is that
-		 * the LEB was garbage collected. The garbage collector resets
-		 * the free and dirty space without recording it anywhere except
-		 * lprops, so if there is not a commit then lprops does not have
-		 * that information next time the file system is mounted.
+		 * property values should be @lp->free == @c->leb_size and
+		 * @lp->dirty == 0, but that is not the case. The reason is that
+		 * the LEB had been garbage collected before it became the bud,
+		 * and there was not commit inbetween. The garbage collector
+		 * resets the free and dirty space without recording it
+		 * anywhere except lprops, so if there was no commit then
+		 * lprops does not have that information.
 		 *
 		 * We do not need to adjust free space because the scan has told
 		 * us the exact value which is recorded in the replay entry as
-		 * r->free.
+		 * @b->free.
 		 *
 		 * However we do need to subtract from the dirty space the
 		 * amount of space that the garbage collector reclaimed, which
 		 * is the whole LEB minus the amount of space that was free.
 		 */
-		dbg_mnt("bud LEB %d was GC'd (%d free, %d dirty)", r->lnum,
+		dbg_mnt("bud LEB %d was GC'd (%d free, %d dirty)", b->bud->lnum,
 			lp->free, lp->dirty);
-		dbg_gc("bud LEB %d was GC'd (%d free, %d dirty)", r->lnum,
+		dbg_gc("bud LEB %d was GC'd (%d free, %d dirty)", b->bud->lnum,
 			lp->free, lp->dirty);
 		dirty -= c->leb_size - lp->free;
 		/*
 		 * If the replay order was perfect the dirty space would now be
-		 * zero. The order is not perfect because the the journal heads
+		 * zero. The order is not perfect because the journal heads
 		 * race with each other. This is not a problem but is does mean
 		 * that the dirty space may temporarily exceed c->leb_size
 		 * during the replay.
 		 */
 		if (dirty != 0)
-			dbg_msg("LEB %d lp: %d free %d dirty "
-				"replay: %d free %d dirty", r->lnum, lp->free,
-				lp->dirty, r->free, r->dirty);
+			dbg_mnt("LEB %d lp: %d free %d dirty replay: %d free %d dirty",
+				b->bud->lnum, lp->free, lp->dirty, b->free,
+				b->dirty);
 	}
-	lp = ubifs_change_lp(c, lp, r->free, dirty + r->dirty,
+	lp = ubifs_change_lp(c, lp, b->free, dirty + b->dirty,
 			     lp->flags | LPROPS_TAKEN, 0);
 	if (IS_ERR(lp)) {
 		err = PTR_ERR(lp);
 		goto out;
 	}
+
+	/* Make sure the journal head points to the latest bud */
+	err = ubifs_wbuf_seek_nolock(&c->jheads[b->bud->jhead].wbuf,
+				     b->bud->lnum, c->leb_size - b->free);
+
 out:
 	ubifs_release_lprops(c);
 	return err;
 }
 
 /**
+ * set_buds_lprops - set free and dirty space for all replayed buds.
+ * @c: UBIFS file-system description object
+ *
+ * This function sets LEB properties for all replayed buds. Returns zero in
+ * case of success and a negative error code in case of failure.
+ */
+static int set_buds_lprops(struct ubifs_info *c)
+{
+	struct bud_entry *b;
+	int err;
+
+	list_for_each_entry(b, &c->replay_buds, list) {
+		err = set_bud_lprops(c, b);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+/**
  * trun_remove_range - apply a replay entry for a truncation to the TNC.
  * @c: UBIFS file-system description object
  * @r: replay entry of truncation
@@ -200,24 +213,22 @@ static int trun_remove_range(struct ubifs_info *c, struct replay_entry *r)
  */
 static int apply_replay_entry(struct ubifs_info *c, struct replay_entry *r)
 {
-	int err, deletion = ((r->flags & REPLAY_DELETION) != 0);
+	int err;
 
-	dbg_mnt("LEB %d:%d len %d flgs %d sqnum %llu %s", r->lnum,
-		r->offs, r->len, r->flags, r->sqnum, DBGKEY(&r->key));
+	dbg_mntk(&r->key, "LEB %d:%d len %d deletion %d sqnum %llu key ",
+		 r->lnum, r->offs, r->len, r->deletion, r->sqnum);
 
 	/* Set c->replay_sqnum to help deal with dangling branches. */
 	c->replay_sqnum = r->sqnum;
 
-	if (r->flags & REPLAY_REF)
-		err = set_bud_lprops(c, r);
-	else if (is_hash_key(c, &r->key)) {
-		if (deletion)
+	if (is_hash_key(c, &r->key)) {
+		if (r->deletion)
 			err = ubifs_tnc_remove_nm(c, &r->key, &r->nm);
 		else
 			err = ubifs_tnc_add_nm(c, &r->key, r->lnum, r->offs,
 					       r->len, &r->nm);
 	} else {
-		if (deletion)
+		if (r->deletion)
 			switch (key_type(c, &r->key)) {
 			case UBIFS_INO_KEY:
 			{
@@ -240,7 +251,7 @@ static int apply_replay_entry(struct ubifs_info *c, struct replay_entry *r)
 			return err;
 
 		if (c->need_recovery)
-			err = ubifs_recover_size_accum(c, &r->key, deletion,
+			err = ubifs_recover_size_accum(c, &r->key, r->deletion,
 						       r->new_size);
 	}
 
@@ -248,68 +259,77 @@ static int apply_replay_entry(struct ubifs_info *c, struct replay_entry *r)
 }
 
 /**
- * destroy_replay_tree - destroy the replay.
- * @c: UBIFS file-system description object
+ * replay_entries_cmp - compare 2 replay entries.
+ * @priv: UBIFS file-system description object
+ * @a: first replay entry
+ * @a: second replay entry
  *
- * Destroy the replay tree.
+ * This is a comparios function for 'list_sort()' which compares 2 replay
+ * entries @a and @b by comparing their sequence numer.  Returns %1 if @a has
+ * greater sequence number and %-1 otherwise.
  */
-static void destroy_replay_tree(struct ubifs_info *c)
+static int replay_entries_cmp(void *priv, struct list_head *a,
+			      struct list_head *b)
 {
-	struct rb_node *this = c->replay_tree.rb_node;
-	struct replay_entry *r;
-
-	while (this) {
-		if (this->rb_left) {
-			this = this->rb_left;
-			continue;
-		} else if (this->rb_right) {
-			this = this->rb_right;
-			continue;
-		}
-		r = rb_entry(this, struct replay_entry, rb);
-		this = rb_parent(this);
-		if (this) {
-			if (this->rb_left == &r->rb)
-				this->rb_left = NULL;
-			else
-				this->rb_right = NULL;
-		}
-		if (is_hash_key(c, &r->key))
-			kfree((void *)r->nm.name);
-		kfree(r);
-	}
-	c->replay_tree = RB_ROOT;
+	struct replay_entry *ra, *rb;
+
+	cond_resched();
+	if (a == b)
+		return 0;
+
+	ra = list_entry(a, struct replay_entry, list);
+	rb = list_entry(b, struct replay_entry, list);
+	ubifs_assert(ra->sqnum != rb->sqnum);
+	if (ra->sqnum > rb->sqnum)
+		return 1;
+	return -1;
 }
 
 /**
- * apply_replay_tree - apply the replay tree to the TNC.
+ * apply_replay_list - apply the replay list to the TNC.
  * @c: UBIFS file-system description object
  *
- * Apply the replay tree.
- * Returns zero in case of success and a negative error code in case of
- * failure.
+ * Apply all entries in the replay list to the TNC. Returns zero in case of
+ * success and a negative error code in case of failure.
  */
-static int apply_replay_tree(struct ubifs_info *c)
+static int apply_replay_list(struct ubifs_info *c)
 {
-	struct rb_node *this = rb_first(&c->replay_tree);
+	struct replay_entry *r;
+	int err;
 
-	while (this) {
-		struct replay_entry *r;
-		int err;
+	list_sort(c, &c->replay_list, &replay_entries_cmp);
 
+	list_for_each_entry(r, &c->replay_list, list) {
 		cond_resched();
 
-		r = rb_entry(this, struct replay_entry, rb);
 		err = apply_replay_entry(c, r);
 		if (err)
 			return err;
-		this = rb_next(this);
 	}
+
 	return 0;
 }
 
 /**
- * insert_node - insert a node to the replay tree.
+ * destroy_replay_list - destroy the replay.
+ * @c: UBIFS file-system description object
+ *
+ * Destroy the replay list.
+ */
+static void destroy_replay_list(struct ubifs_info *c)
+{
+	struct replay_entry *r, *tmp;
+
+	list_for_each_entry_safe(r, tmp, &c->replay_list, list) {
+		if (is_hash_key(c, &r->key))
+			kfree(r->nm.name);
+		list_del(&r->list);
+		kfree(r);
+	}
+}
+
+/**
+ * insert_node - insert a node to the replay list
  * @c: UBIFS file-system description object
  * @lnum: node logical eraseblock number
  * @offs: node offset
@@ -321,39 +341,25 @@ static int apply_replay_tree(struct ubifs_info *c)
  * @old_size: truncation old size
  * @new_size: truncation new size
  *
- * This function inserts a scanned non-direntry node to the replay tree. The
- * replay tree is an RB-tree containing @struct replay_entry elements which are
- * indexed by the sequence number. The replay tree is applied at the very end
- * of the replay process. Since the tree is sorted in sequence number order,
- * the older modifications are applied first. This function returns zero in
- * case of success and a negative error code in case of failure.
+ * This function inserts a scanned non-direntry node to the replay list. The
+ * replay list contains @struct replay_entry elements, and we sort this list in
+ * sequence number order before applying it. The replay list is applied at the
+ * very end of the replay process. Since the list is sorted in sequence number
+ * order, the older modifications are applied first. This function returns zero
+ * in case of success and a negative error code in case of failure.
  */
 static int insert_node(struct ubifs_info *c, int lnum, int offs, int len,
 		       union ubifs_key *key, unsigned long long sqnum,
 		       int deletion, int *used, loff_t old_size,
 		       loff_t new_size)
 {
-	struct rb_node **p = &c->replay_tree.rb_node, *parent = NULL;
 	struct replay_entry *r;
 
+	dbg_mntk(key, "add LEB %d:%d, key ", lnum, offs);
+
 	if (key_inum(c, key) >= c->highest_inum)
 		c->highest_inum = key_inum(c, key);
 
-	dbg_mnt("add LEB %d:%d, key %s", lnum, offs, DBGKEY(key));
-	while (*p) {
-		parent = *p;
-		r = rb_entry(parent, struct replay_entry, rb);
-		if (sqnum < r->sqnum) {
-			p = &(*p)->rb_left;
-			continue;
-		} else if (sqnum > r->sqnum) {
-			p = &(*p)->rb_right;
-			continue;
-		}
-		ubifs_err("duplicate sqnum in replay");
-		return -EINVAL;
-	}
-
 	r = kzalloc(sizeof(struct replay_entry), GFP_KERNEL);
 	if (!r)
 		return -ENOMEM;
@@ -363,19 +369,18 @@ static int insert_node(struct ubifs_info *c, int lnum, int offs, int len,
 	r->lnum = lnum;
 	r->offs = offs;
 	r->len = len;
+	r->deletion = !!deletion;
 	r->sqnum = sqnum;
-	r->flags = (deletion ? REPLAY_DELETION : 0);
+	key_copy(c, key, &r->key);
 	r->old_size = old_size;
 	r->new_size = new_size;
-	key_copy(c, key, &r->key);
 
-	rb_link_node(&r->rb, parent, p);
-	rb_insert_color(&r->rb, &c->replay_tree);
+	list_add_tail(&r->list, &c->replay_list);
 	return 0;
 }
 
 /**
- * insert_dent - insert a directory entry node into the replay tree.
+ * insert_dent - insert a directory entry node into the replay list.
  * @c: UBIFS file-system description object
  * @lnum: node logical eraseblock number
  * @offs: node offset
@@ -387,43 +392,25 @@ static int insert_node(struct ubifs_info *c, int lnum, int offs, int len,
  * @deletion: non-zero if this is a deletion
  * @used: number of bytes in use in a LEB
  *
- * This function inserts a scanned directory entry node to the replay tree.
- * Returns zero in case of success and a negative error code in case of
- * failure.
- *
- * This function is also used for extended attribute entries because they are
- * implemented as directory entry nodes.
+ * This function inserts a scanned directory entry node or an extended
+ * attribute entry to the replay list. Returns zero in case of success and a
+ * negative error code in case of failure.
  */
 static int insert_dent(struct ubifs_info *c, int lnum, int offs, int len,
 		       union ubifs_key *key, const char *name, int nlen,
 		       unsigned long long sqnum, int deletion, int *used)
 {
-	struct rb_node **p = &c->replay_tree.rb_node, *parent = NULL;
 	struct replay_entry *r;
 	char *nbuf;
 
+	dbg_mntk(key, "add LEB %d:%d, key ", lnum, offs);
 	if (key_inum(c, key) >= c->highest_inum)
 		c->highest_inum = key_inum(c, key);
 
-	dbg_mnt("add LEB %d:%d, key %s", lnum, offs, DBGKEY(key));
-	while (*p) {
-		parent = *p;
-		r = rb_entry(parent, struct replay_entry, rb);
-		if (sqnum < r->sqnum) {
-			p = &(*p)->rb_left;
-			continue;
-		}
-		if (sqnum > r->sqnum) {
-			p = &(*p)->rb_right;
-			continue;
-		}
-		ubifs_err("duplicate sqnum in replay");
-		return -EINVAL;
-	}
-
 	r = kzalloc(sizeof(struct replay_entry), GFP_KERNEL);
 	if (!r)
 		return -ENOMEM;
+
 	nbuf = kmalloc(nlen + 1, GFP_KERNEL);
 	if (!nbuf) {
 		kfree(r);
@@ -435,19 +422,18 @@ static int insert_dent(struct ubifs_info *c, int lnum, int offs, int len,
 	r->lnum = lnum;
 	r->offs = offs;
 	r->len = len;
+	r->deletion = !!deletion;
 	r->sqnum = sqnum;
+	key_copy(c, key, &r->key);
 	r->nm.len = nlen;
 	memcpy(nbuf, name, nlen);
 	nbuf[nlen] = '\0';
 	r->nm.name = nbuf;
-	r->flags = (deletion ? REPLAY_DELETION : 0);
-	key_copy(c, key, &r->key);
 
-	ubifs_assert(!*p);
-	rb_link_node(&r->rb, parent, p);
-	rb_insert_color(&r->rb, &c->replay_tree);
+	list_add_tail(&r->list, &c->replay_list);
 	return 0;
 }
+#endif
 
 /**
  * ubifs_validate_entry - validate directory or extended attribute entry node.
@@ -466,7 +452,7 @@ int ubifs_validate_entry(struct ubifs_info *c,
 	if (le32_to_cpu(dent->ch.len) != nlen + UBIFS_DENT_NODE_SZ + 1 ||
 	    dent->type >= UBIFS_ITYPES_CNT ||
 	    nlen > UBIFS_MAX_NLEN || dent->name[nlen] != 0 ||
-	    strnlen((char *)dent->name, nlen) != nlen ||
+	    strnlen(dent->name, nlen) != nlen ||
 	    le64_to_cpu(dent->inum) > MAX_INUM) {
 		ubifs_err("bad %s node", key_type == UBIFS_DENT_KEY ?
 			  "directory entry" : "extended attribute entry");
@@ -481,32 +467,94 @@ int ubifs_validate_entry(struct ubifs_info *c,
 	return 0;
 }
 
+#ifndef __UBOOT__
+/**
+ * is_last_bud - check if the bud is the last in the journal head.
+ * @c: UBIFS file-system description object
+ * @bud: bud description object
+ *
+ * This function checks if bud @bud is the last bud in its journal head. This
+ * information is then used by 'replay_bud()' to decide whether the bud can
+ * have corruptions or not. Indeed, only last buds can be corrupted by power
+ * cuts. Returns %1 if this is the last bud, and %0 if not.
+ */
+static int is_last_bud(struct ubifs_info *c, struct ubifs_bud *bud)
+{
+	struct ubifs_jhead *jh = &c->jheads[bud->jhead];
+	struct ubifs_bud *next;
+	uint32_t data;
+	int err;
+
+	if (list_is_last(&bud->list, &jh->buds_list))
+		return 1;
+
+	/*
+	 * The following is a quirk to make sure we work correctly with UBIFS
+	 * images used with older UBIFS.
+	 *
+	 * Normally, the last bud will be the last in the journal head's list
+	 * of bud. However, there is one exception if the UBIFS image belongs
+	 * to older UBIFS. This is fairly unlikely: one would need to use old
+	 * UBIFS, then have a power cut exactly at the right point, and then
+	 * try to mount this image with new UBIFS.
+	 *
+	 * The exception is: it is possible to have 2 buds A and B, A goes
+	 * before B, and B is the last, bud B is contains no data, and bud A is
+	 * corrupted at the end. The reason is that in older versions when the
+	 * journal code switched the next bud (from A to B), it first added a
+	 * log reference node for the new bud (B), and only after this it
+	 * synchronized the write-buffer of current bud (A). But later this was
+	 * changed and UBIFS started to always synchronize the write-buffer of
+	 * the bud (A) before writing the log reference for the new bud (B).
+	 *
+	 * But because older UBIFS always synchronized A's write-buffer before
+	 * writing to B, we can recognize this exceptional situation but
+	 * checking the contents of bud B - if it is empty, then A can be
+	 * treated as the last and we can recover it.
+	 *
+	 * TODO: remove this piece of code in a couple of years (today it is
+	 * 16.05.2011).
+	 */
+	next = list_entry(bud->list.next, struct ubifs_bud, list);
+	if (!list_is_last(&next->list, &jh->buds_list))
+		return 0;
+
+	err = ubifs_leb_read(c, next->lnum, (char *)&data, next->start, 4, 1);
+	if (err)
+		return 0;
+
+	return data == 0xFFFFFFFF;
+}
+
 /**
  * replay_bud - replay a bud logical eraseblock.
  * @c: UBIFS file-system description object
- * @lnum: bud logical eraseblock number to replay
- * @offs: bud start offset
- * @jhead: journal head to which this bud belongs
- * @free: amount of free space in the bud is returned here
- * @dirty: amount of dirty space from padding and deletion nodes is returned
- * here
+ * @b: bud entry which describes the bud
  *
- * This function returns zero in case of success and a negative error code in
- * case of failure.
+ * This function replays bud @bud, recovers it if needed, and adds all nodes
+ * from this bud to the replay list. Returns zero in case of success and a
+ * negative error code in case of failure.
  */
-static int replay_bud(struct ubifs_info *c, int lnum, int offs, int jhead,
-		      int *free, int *dirty)
+static int replay_bud(struct ubifs_info *c, struct bud_entry *b)
 {
-	int err = 0, used = 0;
+	int is_last = is_last_bud(c, b->bud);
+	int err = 0, used = 0, lnum = b->bud->lnum, offs = b->bud->start;
 	struct ubifs_scan_leb *sleb;
 	struct ubifs_scan_node *snod;
-	struct ubifs_bud *bud;
 
-	dbg_mnt("replay bud LEB %d, head %d", lnum, jhead);
-	if (c->need_recovery)
-		sleb = ubifs_recover_leb(c, lnum, offs, c->sbuf, jhead != GCHD);
+	dbg_mnt("replay bud LEB %d, head %d, offs %d, is_last %d",
+		lnum, b->bud->jhead, offs, is_last);
+
+	if (c->need_recovery && is_last)
+		/*
+		 * Recover only last LEBs in the journal heads, because power
+		 * cuts may cause corruptions only in these LEBs, because only
+		 * these LEBs could possibly be written to at the power cut
+		 * time.
+		 */
+		sleb = ubifs_recover_leb(c, lnum, offs, c->sbuf, b->bud->jhead);
 	else
-		sleb = ubifs_scan(c, lnum, offs, c->sbuf);
+		sleb = ubifs_scan(c, lnum, offs, c->sbuf, 0);
 	if (IS_ERR(sleb))
 		return PTR_ERR(sleb);
 
@@ -580,7 +628,7 @@ static int replay_bud(struct ubifs_info *c, int lnum, int offs, int jhead,
 				goto out_dump;
 
 			err = insert_dent(c, lnum, snod->offs, snod->len,
-					  &snod->key, (char *)dent->name,
+					  &snod->key, dent->name,
 					  le16_to_cpu(dent->nlen), snod->sqnum,
 					  !le64_to_cpu(dent->inum), &used);
 			break;
@@ -620,15 +668,14 @@ static int replay_bud(struct ubifs_info *c, int lnum, int offs, int jhead,
 			goto out;
 	}
 
-	bud = ubifs_search_bud(c, lnum);
-	if (!bud)
-		BUG();
-
+	ubifs_assert(ubifs_search_bud(c, lnum));
 	ubifs_assert(sleb->endpt - offs >= used);
 	ubifs_assert(sleb->endpt % c->min_io_size == 0);
 
-	*dirty = sleb->endpt - offs - used;
-	*free = c->leb_size - sleb->endpt;
+	b->dirty = sleb->endpt - offs - used;
+	b->free = c->leb_size - sleb->endpt;
+	dbg_mnt("bud LEB %d replied: dirty %d, free %d",
+		lnum, b->dirty, b->free);
 
 out:
 	ubifs_scan_destroy(sleb);
@@ -636,61 +683,12 @@ out:
 
 out_dump:
 	ubifs_err("bad node is at LEB %d:%d", lnum, snod->offs);
-	dbg_dump_node(c, snod->node);
+	ubifs_dump_node(c, snod->node);
 	ubifs_scan_destroy(sleb);
 	return -EINVAL;
 }
 
 /**
- * insert_ref_node - insert a reference node to the replay tree.
- * @c: UBIFS file-system description object
- * @lnum: node logical eraseblock number
- * @offs: node offset
- * @sqnum: sequence number
- * @free: amount of free space in bud
- * @dirty: amount of dirty space from padding and deletion nodes
- *
- * This function inserts a reference node to the replay tree and returns zero
- * in case of success or a negative error code in case of failure.
- */
-static int insert_ref_node(struct ubifs_info *c, int lnum, int offs,
-			   unsigned long long sqnum, int free, int dirty)
-{
-	struct rb_node **p = &c->replay_tree.rb_node, *parent = NULL;
-	struct replay_entry *r;
-
-	dbg_mnt("add ref LEB %d:%d", lnum, offs);
-	while (*p) {
-		parent = *p;
-		r = rb_entry(parent, struct replay_entry, rb);
-		if (sqnum < r->sqnum) {
-			p = &(*p)->rb_left;
-			continue;
-		} else if (sqnum > r->sqnum) {
-			p = &(*p)->rb_right;
-			continue;
-		}
-		ubifs_err("duplicate sqnum in replay tree");
-		return -EINVAL;
-	}
-
-	r = kzalloc(sizeof(struct replay_entry), GFP_KERNEL);
-	if (!r)
-		return -ENOMEM;
-
-	r->lnum = lnum;
-	r->offs = offs;
-	r->sqnum = sqnum;
-	r->flags = REPLAY_REF;
-	r->free = free;
-	r->dirty = dirty;
-
-	rb_link_node(&r->rb, parent, p);
-	rb_insert_color(&r->rb, &c->replay_tree);
-	return 0;
-}
-
-/**
  * replay_buds - replay all buds.
  * @c: UBIFS file-system description object
  *
@@ -700,17 +698,16 @@ static int insert_ref_node(struct ubifs_info *c, int lnum, int offs,
 static int replay_buds(struct ubifs_info *c)
 {
 	struct bud_entry *b;
-	int err, uninitialized_var(free), uninitialized_var(dirty);
+	int err;
+	unsigned long long prev_sqnum = 0;
 
 	list_for_each_entry(b, &c->replay_buds, list) {
-		err = replay_bud(c, b->bud->lnum, b->bud->start, b->bud->jhead,
-				 &free, &dirty);
-		if (err)
-			return err;
-		err = insert_ref_node(c, b->bud->lnum, b->bud->start, b->sqnum,
-				      free, dirty);
+		err = replay_bud(c, b);
 		if (err)
 			return err;
+
+		ubifs_assert(b->sqnum > prev_sqnum);
+		prev_sqnum = b->sqnum;
 	}
 
 	return 0;
@@ -831,10 +828,16 @@ static int replay_log_leb(struct ubifs_info *c, int lnum, int offs, void *sbuf)
 	const struct ubifs_cs_node *node;
 
 	dbg_mnt("replay log LEB %d:%d", lnum, offs);
-	sleb = ubifs_scan(c, lnum, offs, sbuf);
+	sleb = ubifs_scan(c, lnum, offs, sbuf, c->need_recovery);
 	if (IS_ERR(sleb)) {
-		if (c->need_recovery)
-			sleb = ubifs_recover_log_leb(c, lnum, offs, sbuf);
+		if (PTR_ERR(sleb) != -EUCLEAN || !c->need_recovery)
+			return PTR_ERR(sleb);
+		/*
+		 * Note, the below function will recover this log LEB only if
+		 * it is the last, because unclean reboots can possibly corrupt
+		 * only the tail of the log.
+		 */
+		sleb = ubifs_recover_log_leb(c, lnum, offs, sbuf);
 		if (IS_ERR(sleb))
 			return PTR_ERR(sleb);
 	}
@@ -845,7 +848,6 @@ static int replay_log_leb(struct ubifs_info *c, int lnum, int offs, void *sbuf)
 	}
 
 	node = sleb->buf;
-
 	snod = list_entry(sleb->nodes.next, struct ubifs_scan_node, list);
 	if (c->cs_sqnum == 0) {
 		/*
@@ -856,16 +858,15 @@ static int replay_log_leb(struct ubifs_info *c, int lnum, int offs, void *sbuf)
 		 * numbers.
 		 */
 		if (snod->type != UBIFS_CS_NODE) {
-			dbg_err("first log node at LEB %d:%d is not CS node",
-				lnum, offs);
+			ubifs_err("first log node at LEB %d:%d is not CS node",
+				  lnum, offs);
 			goto out_dump;
 		}
 		if (le64_to_cpu(node->cmt_no) != c->cmt_no) {
-			dbg_err("first CS node at LEB %d:%d has wrong "
-				"commit number %llu expected %llu",
-				lnum, offs,
-				(unsigned long long)le64_to_cpu(node->cmt_no),
-				c->cmt_no);
+			ubifs_err("first CS node at LEB %d:%d has wrong commit number %llu expected %llu",
+				  lnum, offs,
+				  (unsigned long long)le64_to_cpu(node->cmt_no),
+				  c->cmt_no);
 			goto out_dump;
 		}
 
@@ -887,12 +888,11 @@ static int replay_log_leb(struct ubifs_info *c, int lnum, int offs, void *sbuf)
 
 	/* Make sure the first node sits at offset zero of the LEB */
 	if (snod->offs != 0) {
-		dbg_err("first node is not at zero offset");
+		ubifs_err("first node is not at zero offset");
 		goto out_dump;
 	}
 
 	list_for_each_entry(snod, &sleb->nodes, list) {
-
 		cond_resched();
 
 		if (snod->sqnum >= SQNUM_WATERMARK) {
@@ -901,8 +901,8 @@ static int replay_log_leb(struct ubifs_info *c, int lnum, int offs, void *sbuf)
 		}
 
 		if (snod->sqnum < c->cs_sqnum) {
-			dbg_err("bad sqnum %llu, commit sqnum %llu",
-				snod->sqnum, c->cs_sqnum);
+			ubifs_err("bad sqnum %llu, commit sqnum %llu",
+				  snod->sqnum, c->cs_sqnum);
 			goto out_dump;
 		}
 
@@ -952,9 +952,9 @@ out:
 	return err;
 
 out_dump:
-	ubifs_err("log error detected while replying the log at LEB %d:%d",
+	ubifs_err("log error detected while replaying the log at LEB %d:%d",
 		  lnum, offs + snod->offs);
-	dbg_dump_node(c, snod->node);
+	ubifs_dump_node(c, snod->node);
 	ubifs_scan_destroy(sleb);
 	return -EINVAL;
 }
@@ -1004,67 +1004,64 @@ out:
  */
 int ubifs_replay_journal(struct ubifs_info *c)
 {
-	int err, i, lnum, offs, _free;
-	void *sbuf = NULL;
+	int err, lnum, free;
 
 	BUILD_BUG_ON(UBIFS_TRUN_KEY > 5);
 
 	/* Update the status of the index head in lprops to 'taken' */
-	_free = take_ihead(c);
-	if (_free < 0)
-		return _free; /* Error code */
+	free = take_ihead(c);
+	if (free < 0)
+		return free; /* Error code */
 
-	if (c->ihead_offs != c->leb_size - _free) {
+	if (c->ihead_offs != c->leb_size - free) {
 		ubifs_err("bad index head LEB %d:%d", c->ihead_lnum,
 			  c->ihead_offs);
 		return -EINVAL;
 	}
 
-	sbuf = vmalloc(c->leb_size);
-	if (!sbuf)
-		return -ENOMEM;
-
 	dbg_mnt("start replaying the journal");
-
 	c->replaying = 1;
-
 	lnum = c->ltail_lnum = c->lhead_lnum;
-	offs = c->lhead_offs;
 
-	for (i = 0; i < c->log_lebs; i++, lnum++) {
-		if (lnum >= UBIFS_LOG_LNUM + c->log_lebs) {
-			/*
-			 * The log is logically circular, we reached the last
-			 * LEB, switch to the first one.
-			 */
-			lnum = UBIFS_LOG_LNUM;
-			offs = 0;
-		}
-		err = replay_log_leb(c, lnum, offs, sbuf);
+	do {
+		err = replay_log_leb(c, lnum, 0, c->sbuf);
 		if (err == 1)
 			/* We hit the end of the log */
 			break;
 		if (err)
 			goto out;
-		offs = 0;
-	}
+		lnum = ubifs_next_log_lnum(c, lnum);
+	} while (lnum != c->ltail_lnum);
 
 	err = replay_buds(c);
 	if (err)
 		goto out;
 
-	err = apply_replay_tree(c);
+	err = apply_replay_list(c);
 	if (err)
 		goto out;
 
+	err = set_buds_lprops(c);
+	if (err)
+		goto out;
+
+	/*
+	 * UBIFS budgeting calculations use @c->bi.uncommitted_idx variable
+	 * to roughly estimate index growth. Things like @c->bi.min_idx_lebs
+	 * depend on it. This means we have to initialize it to make sure
+	 * budgeting works properly.
+	 */
+	c->bi.uncommitted_idx = atomic_long_read(&c->dirty_zn_cnt);
+	c->bi.uncommitted_idx *= c->max_idx_node_sz;
+
 	ubifs_assert(c->bud_bytes <= c->max_bud_bytes || c->need_recovery);
-	dbg_mnt("finished, log head LEB %d:%d, max_sqnum %llu, "
-		"highest_inum %lu", c->lhead_lnum, c->lhead_offs, c->max_sqnum,
+	dbg_mnt("finished, log head LEB %d:%d, max_sqnum %llu, highest_inum %lu",
+		c->lhead_lnum, c->lhead_offs, c->max_sqnum,
 		(unsigned long)c->highest_inum);
 out:
-	destroy_replay_tree(c);
+	destroy_replay_list(c);
 	destroy_bud_list(c);
-	vfree(sbuf);
 	c->replaying = 0;
 	return err;
 }
+#endif
diff --git a/fs/ubifs/sb.c b/fs/ubifs/sb.c
index 00c9cd3..fc0194a 100644
--- a/fs/ubifs/sb.c
+++ b/fs/ubifs/sb.c
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Artem Bityutskiy (Битюцкий Артём)
  *          Adrian Hunter
@@ -27,6 +16,18 @@
  */
 
 #include "ubifs.h"
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/math64.h>
+#else
+
+#include <linux/compat.h>
+#include <linux/err.h>
+#include <ubi_uboot.h>
+#include <linux/stat.h>
+#endif
 
 /*
  * Default journal size in logical eraseblocks as a percent of total
@@ -60,6 +61,282 @@
 /* Default time granularity in nanoseconds */
 #define DEFAULT_TIME_GRAN 1000000000
 
+#ifndef __UBOOT__
+/**
+ * create_default_filesystem - format empty UBI volume.
+ * @c: UBIFS file-system description object
+ *
+ * This function creates default empty file-system. Returns zero in case of
+ * success and a negative error code in case of failure.
+ */
+static int create_default_filesystem(struct ubifs_info *c)
+{
+	struct ubifs_sb_node *sup;
+	struct ubifs_mst_node *mst;
+	struct ubifs_idx_node *idx;
+	struct ubifs_branch *br;
+	struct ubifs_ino_node *ino;
+	struct ubifs_cs_node *cs;
+	union ubifs_key key;
+	int err, tmp, jnl_lebs, log_lebs, max_buds, main_lebs, main_first;
+	int lpt_lebs, lpt_first, orph_lebs, big_lpt, ino_waste, sup_flags = 0;
+	int min_leb_cnt = UBIFS_MIN_LEB_CNT;
+	long long tmp64, main_bytes;
+	__le64 tmp_le64;
+
+	/* Some functions called from here depend on the @c->key_len filed */
+	c->key_len = UBIFS_SK_LEN;
+
+	/*
+	 * First of all, we have to calculate default file-system geometry -
+	 * log size, journal size, etc.
+	 */
+	if (c->leb_cnt < 0x7FFFFFFF / DEFAULT_JNL_PERCENT)
+		/* We can first multiply then divide and have no overflow */
+		jnl_lebs = c->leb_cnt * DEFAULT_JNL_PERCENT / 100;
+	else
+		jnl_lebs = (c->leb_cnt / 100) * DEFAULT_JNL_PERCENT;
+
+	if (jnl_lebs < UBIFS_MIN_JNL_LEBS)
+		jnl_lebs = UBIFS_MIN_JNL_LEBS;
+	if (jnl_lebs * c->leb_size > DEFAULT_MAX_JNL)
+		jnl_lebs = DEFAULT_MAX_JNL / c->leb_size;
+
+	/*
+	 * The log should be large enough to fit reference nodes for all bud
+	 * LEBs. Because buds do not have to start from the beginning of LEBs
+	 * (half of the LEB may contain committed data), the log should
+	 * generally be larger, make it twice as large.
+	 */
+	tmp = 2 * (c->ref_node_alsz * jnl_lebs) + c->leb_size - 1;
+	log_lebs = tmp / c->leb_size;
+	/* Plus one LEB reserved for commit */
+	log_lebs += 1;
+	if (c->leb_cnt - min_leb_cnt > 8) {
+		/* And some extra space to allow writes while committing */
+		log_lebs += 1;
+		min_leb_cnt += 1;
+	}
+
+	max_buds = jnl_lebs - log_lebs;
+	if (max_buds < UBIFS_MIN_BUD_LEBS)
+		max_buds = UBIFS_MIN_BUD_LEBS;
+
+	/*
+	 * Orphan nodes are stored in a separate area. One node can store a lot
+	 * of orphan inode numbers, but when new orphan comes we just add a new
+	 * orphan node. At some point the nodes are consolidated into one
+	 * orphan node.
+	 */
+	orph_lebs = UBIFS_MIN_ORPH_LEBS;
+	if (c->leb_cnt - min_leb_cnt > 1)
+		/*
+		 * For debugging purposes it is better to have at least 2
+		 * orphan LEBs, because the orphan subsystem would need to do
+		 * consolidations and would be stressed more.
+		 */
+		orph_lebs += 1;
+
+	main_lebs = c->leb_cnt - UBIFS_SB_LEBS - UBIFS_MST_LEBS - log_lebs;
+	main_lebs -= orph_lebs;
+
+	lpt_first = UBIFS_LOG_LNUM + log_lebs;
+	c->lsave_cnt = DEFAULT_LSAVE_CNT;
+	c->max_leb_cnt = c->leb_cnt;
+	err = ubifs_create_dflt_lpt(c, &main_lebs, lpt_first, &lpt_lebs,
+				    &big_lpt);
+	if (err)
+		return err;
+
+	dbg_gen("LEB Properties Tree created (LEBs %d-%d)", lpt_first,
+		lpt_first + lpt_lebs - 1);
+
+	main_first = c->leb_cnt - main_lebs;
+
+	/* Create default superblock */
+	tmp = ALIGN(UBIFS_SB_NODE_SZ, c->min_io_size);
+	sup = kzalloc(tmp, GFP_KERNEL);
+	if (!sup)
+		return -ENOMEM;
+
+	tmp64 = (long long)max_buds * c->leb_size;
+	if (big_lpt)
+		sup_flags |= UBIFS_FLG_BIGLPT;
+
+	sup->ch.node_type  = UBIFS_SB_NODE;
+	sup->key_hash      = UBIFS_KEY_HASH_R5;
+	sup->flags         = cpu_to_le32(sup_flags);
+	sup->min_io_size   = cpu_to_le32(c->min_io_size);
+	sup->leb_size      = cpu_to_le32(c->leb_size);
+	sup->leb_cnt       = cpu_to_le32(c->leb_cnt);
+	sup->max_leb_cnt   = cpu_to_le32(c->max_leb_cnt);
+	sup->max_bud_bytes = cpu_to_le64(tmp64);
+	sup->log_lebs      = cpu_to_le32(log_lebs);
+	sup->lpt_lebs      = cpu_to_le32(lpt_lebs);
+	sup->orph_lebs     = cpu_to_le32(orph_lebs);
+	sup->jhead_cnt     = cpu_to_le32(DEFAULT_JHEADS_CNT);
+	sup->fanout        = cpu_to_le32(DEFAULT_FANOUT);
+	sup->lsave_cnt     = cpu_to_le32(c->lsave_cnt);
+	sup->fmt_version   = cpu_to_le32(UBIFS_FORMAT_VERSION);
+	sup->time_gran     = cpu_to_le32(DEFAULT_TIME_GRAN);
+	if (c->mount_opts.override_compr)
+		sup->default_compr = cpu_to_le16(c->mount_opts.compr_type);
+	else
+		sup->default_compr = cpu_to_le16(UBIFS_COMPR_LZO);
+
+	generate_random_uuid(sup->uuid);
+
+	main_bytes = (long long)main_lebs * c->leb_size;
+	tmp64 = div_u64(main_bytes * DEFAULT_RP_PERCENT, 100);
+	if (tmp64 > DEFAULT_MAX_RP_SIZE)
+		tmp64 = DEFAULT_MAX_RP_SIZE;
+	sup->rp_size = cpu_to_le64(tmp64);
+	sup->ro_compat_version = cpu_to_le32(UBIFS_RO_COMPAT_VERSION);
+
+	err = ubifs_write_node(c, sup, UBIFS_SB_NODE_SZ, 0, 0);
+	kfree(sup);
+	if (err)
+		return err;
+
+	dbg_gen("default superblock created at LEB 0:0");
+
+	/* Create default master node */
+	mst = kzalloc(c->mst_node_alsz, GFP_KERNEL);
+	if (!mst)
+		return -ENOMEM;
+
+	mst->ch.node_type = UBIFS_MST_NODE;
+	mst->log_lnum     = cpu_to_le32(UBIFS_LOG_LNUM);
+	mst->highest_inum = cpu_to_le64(UBIFS_FIRST_INO);
+	mst->cmt_no       = 0;
+	mst->root_lnum    = cpu_to_le32(main_first + DEFAULT_IDX_LEB);
+	mst->root_offs    = 0;
+	tmp = ubifs_idx_node_sz(c, 1);
+	mst->root_len     = cpu_to_le32(tmp);
+	mst->gc_lnum      = cpu_to_le32(main_first + DEFAULT_GC_LEB);
+	mst->ihead_lnum   = cpu_to_le32(main_first + DEFAULT_IDX_LEB);
+	mst->ihead_offs   = cpu_to_le32(ALIGN(tmp, c->min_io_size));
+	mst->index_size   = cpu_to_le64(ALIGN(tmp, 8));
+	mst->lpt_lnum     = cpu_to_le32(c->lpt_lnum);
+	mst->lpt_offs     = cpu_to_le32(c->lpt_offs);
+	mst->nhead_lnum   = cpu_to_le32(c->nhead_lnum);
+	mst->nhead_offs   = cpu_to_le32(c->nhead_offs);
+	mst->ltab_lnum    = cpu_to_le32(c->ltab_lnum);
+	mst->ltab_offs    = cpu_to_le32(c->ltab_offs);
+	mst->lsave_lnum   = cpu_to_le32(c->lsave_lnum);
+	mst->lsave_offs   = cpu_to_le32(c->lsave_offs);
+	mst->lscan_lnum   = cpu_to_le32(main_first);
+	mst->empty_lebs   = cpu_to_le32(main_lebs - 2);
+	mst->idx_lebs     = cpu_to_le32(1);
+	mst->leb_cnt      = cpu_to_le32(c->leb_cnt);
+
+	/* Calculate lprops statistics */
+	tmp64 = main_bytes;
+	tmp64 -= ALIGN(ubifs_idx_node_sz(c, 1), c->min_io_size);
+	tmp64 -= ALIGN(UBIFS_INO_NODE_SZ, c->min_io_size);
+	mst->total_free = cpu_to_le64(tmp64);
+
+	tmp64 = ALIGN(ubifs_idx_node_sz(c, 1), c->min_io_size);
+	ino_waste = ALIGN(UBIFS_INO_NODE_SZ, c->min_io_size) -
+			  UBIFS_INO_NODE_SZ;
+	tmp64 += ino_waste;
+	tmp64 -= ALIGN(ubifs_idx_node_sz(c, 1), 8);
+	mst->total_dirty = cpu_to_le64(tmp64);
+
+	/*  The indexing LEB does not contribute to dark space */
+	tmp64 = ((long long)(c->main_lebs - 1) * c->dark_wm);
+	mst->total_dark = cpu_to_le64(tmp64);
+
+	mst->total_used = cpu_to_le64(UBIFS_INO_NODE_SZ);
+
+	err = ubifs_write_node(c, mst, UBIFS_MST_NODE_SZ, UBIFS_MST_LNUM, 0);
+	if (err) {
+		kfree(mst);
+		return err;
+	}
+	err = ubifs_write_node(c, mst, UBIFS_MST_NODE_SZ, UBIFS_MST_LNUM + 1,
+			       0);
+	kfree(mst);
+	if (err)
+		return err;
+
+	dbg_gen("default master node created at LEB %d:0", UBIFS_MST_LNUM);
+
+	/* Create the root indexing node */
+	tmp = ubifs_idx_node_sz(c, 1);
+	idx = kzalloc(ALIGN(tmp, c->min_io_size), GFP_KERNEL);
+	if (!idx)
+		return -ENOMEM;
+
+	c->key_fmt = UBIFS_SIMPLE_KEY_FMT;
+	c->key_hash = key_r5_hash;
+
+	idx->ch.node_type = UBIFS_IDX_NODE;
+	idx->child_cnt = cpu_to_le16(1);
+	ino_key_init(c, &key, UBIFS_ROOT_INO);
+	br = ubifs_idx_branch(c, idx, 0);
+	key_write_idx(c, &key, &br->key);
+	br->lnum = cpu_to_le32(main_first + DEFAULT_DATA_LEB);
+	br->len  = cpu_to_le32(UBIFS_INO_NODE_SZ);
+	err = ubifs_write_node(c, idx, tmp, main_first + DEFAULT_IDX_LEB, 0);
+	kfree(idx);
+	if (err)
+		return err;
+
+	dbg_gen("default root indexing node created LEB %d:0",
+		main_first + DEFAULT_IDX_LEB);
+
+	/* Create default root inode */
+	tmp = ALIGN(UBIFS_INO_NODE_SZ, c->min_io_size);
+	ino = kzalloc(tmp, GFP_KERNEL);
+	if (!ino)
+		return -ENOMEM;
+
+	ino_key_init_flash(c, &ino->key, UBIFS_ROOT_INO);
+	ino->ch.node_type = UBIFS_INO_NODE;
+	ino->creat_sqnum = cpu_to_le64(++c->max_sqnum);
+	ino->nlink = cpu_to_le32(2);
+	tmp_le64 = cpu_to_le64(CURRENT_TIME_SEC.tv_sec);
+	ino->atime_sec   = tmp_le64;
+	ino->ctime_sec   = tmp_le64;
+	ino->mtime_sec   = tmp_le64;
+	ino->atime_nsec  = 0;
+	ino->ctime_nsec  = 0;
+	ino->mtime_nsec  = 0;
+	ino->mode = cpu_to_le32(S_IFDIR | S_IRUGO | S_IWUSR | S_IXUGO);
+	ino->size = cpu_to_le64(UBIFS_INO_NODE_SZ);
+
+	/* Set compression enabled by default */
+	ino->flags = cpu_to_le32(UBIFS_COMPR_FL);
+
+	err = ubifs_write_node(c, ino, UBIFS_INO_NODE_SZ,
+			       main_first + DEFAULT_DATA_LEB, 0);
+	kfree(ino);
+	if (err)
+		return err;
+
+	dbg_gen("root inode created at LEB %d:0",
+		main_first + DEFAULT_DATA_LEB);
+
+	/*
+	 * The first node in the log has to be the commit start node. This is
+	 * always the case during normal file-system operation. Write a fake
+	 * commit start node to the log.
+	 */
+	tmp = ALIGN(UBIFS_CS_NODE_SZ, c->min_io_size);
+	cs = kzalloc(tmp, GFP_KERNEL);
+	if (!cs)
+		return -ENOMEM;
+
+	cs->ch.node_type = UBIFS_CS_NODE;
+	err = ubifs_write_node(c, cs, UBIFS_CS_NODE_SZ, UBIFS_LOG_LNUM, 0);
+	kfree(cs);
+
+	ubifs_msg("default file-system created");
+	return 0;
+}
+#endif
+
 /**
  * validate_sb - validate superblock node.
  * @c: UBIFS file-system description object
@@ -114,9 +391,8 @@ static int validate_sb(struct ubifs_info *c, struct ubifs_sb_node *sup)
 	min_leb_cnt += c->lpt_lebs + c->orph_lebs + c->jhead_cnt + 6;
 
 	if (c->leb_cnt < min_leb_cnt || c->leb_cnt > c->vi.size) {
-		ubifs_err("bad LEB count: %d in superblock, %d on UBI volume, "
-			  "%d minimum required", c->leb_cnt, c->vi.size,
-			  min_leb_cnt);
+		ubifs_err("bad LEB count: %d in superblock, %d on UBI volume, %d minimum required",
+			  c->leb_cnt, c->vi.size, min_leb_cnt);
 		goto failed;
 	}
 
@@ -127,13 +403,22 @@ static int validate_sb(struct ubifs_info *c, struct ubifs_sb_node *sup)
 	}
 
 	if (c->main_lebs < UBIFS_MIN_MAIN_LEBS) {
-		err = 7;
+		ubifs_err("too few main LEBs count %d, must be at least %d",
+			  c->main_lebs, UBIFS_MIN_MAIN_LEBS);
+		goto failed;
+	}
+
+	max_bytes = (long long)c->leb_size * UBIFS_MIN_BUD_LEBS;
+	if (c->max_bud_bytes < max_bytes) {
+		ubifs_err("too small journal (%lld bytes), must be at least %lld bytes",
+			  c->max_bud_bytes, max_bytes);
 		goto failed;
 	}
 
-	if (c->max_bud_bytes < (long long)c->leb_size * UBIFS_MIN_BUD_LEBS ||
-	    c->max_bud_bytes > (long long)c->leb_size * c->main_lebs) {
-		err = 8;
+	max_bytes = (long long)c->leb_size * c->main_lebs;
+	if (c->max_bud_bytes > max_bytes) {
+		ubifs_err("too large journal size (%lld bytes), only %lld bytes available in the main area",
+			  c->max_bud_bytes, max_bytes);
 		goto failed;
 	}
 
@@ -167,7 +452,6 @@ static int validate_sb(struct ubifs_info *c, struct ubifs_sb_node *sup)
 		goto failed;
 	}
 
-	max_bytes = c->main_lebs * (long long)c->leb_size;
 	if (c->rp_size < 0 || max_bytes < c->rp_size) {
 		err = 14;
 		goto failed;
@@ -183,7 +467,7 @@ static int validate_sb(struct ubifs_info *c, struct ubifs_sb_node *sup)
 
 failed:
 	ubifs_err("bad superblock, error %d", err);
-	dbg_dump_node(c, sup);
+	ubifs_dump_node(c, sup);
 	return -EINVAL;
 }
 
@@ -192,7 +476,8 @@ failed:
  * @c: UBIFS file-system description object
  *
  * This function returns a pointer to the superblock node or a negative error
- * code.
+ * code. Note, the user of this function is responsible of kfree()'ing the
+ * returned superblock buffer.
  */
 struct ubifs_sb_node *ubifs_read_sb_node(struct ubifs_info *c)
 {
@@ -214,6 +499,21 @@ struct ubifs_sb_node *ubifs_read_sb_node(struct ubifs_info *c)
 }
 
 /**
+ * ubifs_write_sb_node - write superblock node.
+ * @c: UBIFS file-system description object
+ * @sup: superblock node read with 'ubifs_read_sb_node()'
+ *
+ * This function returns %0 on success and a negative error code on failure.
+ */
+int ubifs_write_sb_node(struct ubifs_info *c, struct ubifs_sb_node *sup)
+{
+	int len = ALIGN(UBIFS_SB_NODE_SZ, c->min_io_size);
+
+	ubifs_prepare_node(c, sup, UBIFS_SB_NODE_SZ, 1);
+	return ubifs_leb_change(c, UBIFS_SB_LNUM, sup, len);
+}
+
+/**
  * ubifs_read_superblock - read superblock.
  * @c: UBIFS file-system description object
  *
@@ -227,8 +527,14 @@ int ubifs_read_superblock(struct ubifs_info *c)
 	struct ubifs_sb_node *sup;
 
 	if (c->empty) {
+#ifndef __UBOOT__
+		err = create_default_filesystem(c);
+		if (err)
+			return err;
+#else
 		printf("No UBIFS filesystem found!\n");
 		return -1;
+#endif
 	}
 
 	sup = ubifs_read_sb_node(c);
@@ -243,16 +549,12 @@ int ubifs_read_superblock(struct ubifs_info *c)
 	 * due to the unavailability of time-travelling equipment.
 	 */
 	if (c->fmt_version > UBIFS_FORMAT_VERSION) {
-		struct super_block *sb = c->vfs_sb;
-		int mounting_ro = sb->s_flags & MS_RDONLY;
-
-		ubifs_assert(!c->ro_media || mounting_ro);
-		if (!mounting_ro ||
+		ubifs_assert(!c->ro_media || c->ro_mount);
+		if (!c->ro_mount ||
 		    c->ro_compat_version > UBIFS_RO_COMPAT_VERSION) {
-			ubifs_err("on-flash format version is w%d/r%d, but "
-				  "software only supports up to version "
-				  "w%d/r%d", c->fmt_version,
-				  c->ro_compat_version, UBIFS_FORMAT_VERSION,
+			ubifs_err("on-flash format version is w%d/r%d, but software only supports up to version w%d/r%d",
+				  c->fmt_version, c->ro_compat_version,
+				  UBIFS_FORMAT_VERSION,
 				  UBIFS_RO_COMPAT_VERSION);
 			if (c->ro_compat_version <= UBIFS_RO_COMPAT_VERSION) {
 				ubifs_msg("only R/O mounting is possible");
@@ -310,22 +612,41 @@ int ubifs_read_superblock(struct ubifs_info *c)
 	c->jhead_cnt     = le32_to_cpu(sup->jhead_cnt) + NONDATA_JHEADS_CNT;
 	c->fanout        = le32_to_cpu(sup->fanout);
 	c->lsave_cnt     = le32_to_cpu(sup->lsave_cnt);
-	c->default_compr = le16_to_cpu(sup->default_compr);
 	c->rp_size       = le64_to_cpu(sup->rp_size);
-	c->rp_uid        = le32_to_cpu(sup->rp_uid);
-	c->rp_gid        = le32_to_cpu(sup->rp_gid);
+#ifndef __UBOOT__
+	c->rp_uid        = make_kuid(&init_user_ns, le32_to_cpu(sup->rp_uid));
+	c->rp_gid        = make_kgid(&init_user_ns, le32_to_cpu(sup->rp_gid));
+#else
+	c->rp_uid.val    = le32_to_cpu(sup->rp_uid);
+	c->rp_gid.val    = le32_to_cpu(sup->rp_gid);
+#endif
 	sup_flags        = le32_to_cpu(sup->flags);
+	if (!c->mount_opts.override_compr)
+		c->default_compr = le16_to_cpu(sup->default_compr);
 
 	c->vfs_sb->s_time_gran = le32_to_cpu(sup->time_gran);
 	memcpy(&c->uuid, &sup->uuid, 16);
 	c->big_lpt = !!(sup_flags & UBIFS_FLG_BIGLPT);
+	c->space_fixup = !!(sup_flags & UBIFS_FLG_SPACE_FIXUP);
 
 	/* Automatically increase file system size to the maximum size */
 	c->old_leb_cnt = c->leb_cnt;
 	if (c->leb_cnt < c->vi.size && c->leb_cnt < c->max_leb_cnt) {
 		c->leb_cnt = min_t(int, c->max_leb_cnt, c->vi.size);
-		dbg_mnt("Auto resizing (ro) from %d LEBs to %d LEBs",
-			c->old_leb_cnt,	c->leb_cnt);
+		if (c->ro_mount)
+			dbg_mnt("Auto resizing (ro) from %d LEBs to %d LEBs",
+				c->old_leb_cnt,	c->leb_cnt);
+#ifndef __UBOOT__
+		else {
+			dbg_mnt("Auto resizing (sb) from %d LEBs to %d LEBs",
+				c->old_leb_cnt, c->leb_cnt);
+			sup->leb_cnt = cpu_to_le32(c->leb_cnt);
+			err = ubifs_write_sb_node(c, sup);
+			if (err)
+				goto out;
+			c->old_leb_cnt = c->leb_cnt;
+		}
+#endif
 	}
 
 	c->log_bytes = (long long)c->log_lebs * c->leb_size;
@@ -337,10 +658,162 @@ int ubifs_read_superblock(struct ubifs_info *c)
 	c->main_lebs = c->leb_cnt - UBIFS_SB_LEBS - UBIFS_MST_LEBS;
 	c->main_lebs -= c->log_lebs + c->lpt_lebs + c->orph_lebs;
 	c->main_first = c->leb_cnt - c->main_lebs;
-	c->report_rp_size = ubifs_reported_space(c, c->rp_size);
 
 	err = validate_sb(c, sup);
 out:
 	kfree(sup);
 	return err;
 }
+
+/**
+ * fixup_leb - fixup/unmap an LEB containing free space.
+ * @c: UBIFS file-system description object
+ * @lnum: the LEB number to fix up
+ * @len: number of used bytes in LEB (starting at offset 0)
+ *
+ * This function reads the contents of the given LEB number @lnum, then fixes
+ * it up, so that empty min. I/O units in the end of LEB are actually erased on
+ * flash (rather than being just all-0xff real data). If the LEB is completely
+ * empty, it is simply unmapped.
+ */
+static int fixup_leb(struct ubifs_info *c, int lnum, int len)
+{
+	int err;
+
+	ubifs_assert(len >= 0);
+	ubifs_assert(len % c->min_io_size == 0);
+	ubifs_assert(len < c->leb_size);
+
+	if (len == 0) {
+		dbg_mnt("unmap empty LEB %d", lnum);
+		return ubifs_leb_unmap(c, lnum);
+	}
+
+	dbg_mnt("fixup LEB %d, data len %d", lnum, len);
+	err = ubifs_leb_read(c, lnum, c->sbuf, 0, len, 1);
+	if (err)
+		return err;
+
+	return ubifs_leb_change(c, lnum, c->sbuf, len);
+}
+
+/**
+ * fixup_free_space - find & remap all LEBs containing free space.
+ * @c: UBIFS file-system description object
+ *
+ * This function walks through all LEBs in the filesystem and fiexes up those
+ * containing free/empty space.
+ */
+static int fixup_free_space(struct ubifs_info *c)
+{
+	int lnum, err = 0;
+	struct ubifs_lprops *lprops;
+
+	ubifs_get_lprops(c);
+
+	/* Fixup LEBs in the master area */
+	for (lnum = UBIFS_MST_LNUM; lnum < UBIFS_LOG_LNUM; lnum++) {
+		err = fixup_leb(c, lnum, c->mst_offs + c->mst_node_alsz);
+		if (err)
+			goto out;
+	}
+
+	/* Unmap unused log LEBs */
+	lnum = ubifs_next_log_lnum(c, c->lhead_lnum);
+	while (lnum != c->ltail_lnum) {
+		err = fixup_leb(c, lnum, 0);
+		if (err)
+			goto out;
+		lnum = ubifs_next_log_lnum(c, lnum);
+	}
+
+	/*
+	 * Fixup the log head which contains the only a CS node at the
+	 * beginning.
+	 */
+	err = fixup_leb(c, c->lhead_lnum,
+			ALIGN(UBIFS_CS_NODE_SZ, c->min_io_size));
+	if (err)
+		goto out;
+
+	/* Fixup LEBs in the LPT area */
+	for (lnum = c->lpt_first; lnum <= c->lpt_last; lnum++) {
+		int free = c->ltab[lnum - c->lpt_first].free;
+
+		if (free > 0) {
+			err = fixup_leb(c, lnum, c->leb_size - free);
+			if (err)
+				goto out;
+		}
+	}
+
+	/* Unmap LEBs in the orphans area */
+	for (lnum = c->orph_first; lnum <= c->orph_last; lnum++) {
+		err = fixup_leb(c, lnum, 0);
+		if (err)
+			goto out;
+	}
+
+	/* Fixup LEBs in the main area */
+	for (lnum = c->main_first; lnum < c->leb_cnt; lnum++) {
+		lprops = ubifs_lpt_lookup(c, lnum);
+		if (IS_ERR(lprops)) {
+			err = PTR_ERR(lprops);
+			goto out;
+		}
+
+		if (lprops->free > 0) {
+			err = fixup_leb(c, lnum, c->leb_size - lprops->free);
+			if (err)
+				goto out;
+		}
+	}
+
+out:
+	ubifs_release_lprops(c);
+	return err;
+}
+
+/**
+ * ubifs_fixup_free_space - find & fix all LEBs with free space.
+ * @c: UBIFS file-system description object
+ *
+ * This function fixes up LEBs containing free space on first mount, if the
+ * appropriate flag was set when the FS was created. Each LEB with one or more
+ * empty min. I/O unit (i.e. free-space-count > 0) is re-written, to make sure
+ * the free space is actually erased. E.g., this is necessary for some NAND
+ * chips, since the free space may have been programmed like real "0xff" data
+ * (generating a non-0xff ECC), causing future writes to the not-really-erased
+ * NAND pages to behave badly. After the space is fixed up, the superblock flag
+ * is cleared, so that this is skipped for all future mounts.
+ */
+int ubifs_fixup_free_space(struct ubifs_info *c)
+{
+	int err;
+	struct ubifs_sb_node *sup;
+
+	ubifs_assert(c->space_fixup);
+	ubifs_assert(!c->ro_mount);
+
+	ubifs_msg("start fixing up free space");
+
+	err = fixup_free_space(c);
+	if (err)
+		return err;
+
+	sup = ubifs_read_sb_node(c);
+	if (IS_ERR(sup))
+		return PTR_ERR(sup);
+
+	/* Free-space fixup is no longer required */
+	c->space_fixup = 0;
+	sup->flags &= cpu_to_le32(~UBIFS_FLG_SPACE_FIXUP);
+
+	err = ubifs_write_sb_node(c, sup);
+	kfree(sup);
+	if (err)
+		return err;
+
+	ubifs_msg("free space fixup complete");
+	return err;
+}
diff --git a/fs/ubifs/scan.c b/fs/ubifs/scan.c
index 0ed8247..5523d4e 100644
--- a/fs/ubifs/scan.c
+++ b/fs/ubifs/scan.c
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Adrian Hunter
  *          Artem Bityutskiy (Битюцкий Артём)
@@ -27,6 +16,10 @@
  * debugging functions.
  */
 
+#define __UBOOT__
+#ifdef __UBOOT__
+#include <linux/err.h>
+#endif
 #include "ubifs.h"
 
 /**
@@ -75,7 +68,7 @@ int ubifs_scan_a_node(const struct ubifs_info *c, void *buf, int len, int lnum,
 	magic = le32_to_cpu(ch->magic);
 
 	if (magic == 0xFFFFFFFF) {
-		dbg_scan("hit empty space");
+		dbg_scan("hit empty space at LEB %d:%d", lnum, offs);
 		return SCANNED_EMPTY_SPACE;
 	}
 
@@ -85,7 +78,8 @@ int ubifs_scan_a_node(const struct ubifs_info *c, void *buf, int len, int lnum,
 	if (len < UBIFS_CH_SZ)
 		return SCANNED_GARBAGE;
 
-	dbg_scan("scanning %s", dbg_ntype(ch->node_type));
+	dbg_scan("scanning %s at LEB %d:%d",
+		 dbg_ntype(ch->node_type), lnum, offs);
 
 	if (ubifs_check_node(c, buf, lnum, offs, quiet, 1))
 		return SCANNED_A_CORRUPT_NODE;
@@ -101,22 +95,21 @@ int ubifs_scan_a_node(const struct ubifs_info *c, void *buf, int len, int lnum,
 			if (!quiet) {
 				ubifs_err("bad pad node at LEB %d:%d",
 					  lnum, offs);
-				dbg_dump_node(c, pad);
+				ubifs_dump_node(c, pad);
 			}
 			return SCANNED_A_BAD_PAD_NODE;
 		}
 
 		/* Make the node pads to 8-byte boundary */
 		if ((node_len + pad_len) & 7) {
-			if (!quiet) {
-				dbg_err("bad padding length %d - %d",
-					offs, offs + node_len + pad_len);
-			}
+			if (!quiet)
+				ubifs_err("bad padding length %d - %d",
+					  offs, offs + node_len + pad_len);
 			return SCANNED_A_BAD_PAD_NODE;
 		}
 
-		dbg_scan("%d bytes padded, offset now %d",
-			 pad_len, ALIGN(offs + node_len + pad_len, 8));
+		dbg_scan("%d bytes padded at LEB %d:%d, offset now %d", pad_len,
+			 lnum, offs, ALIGN(offs + node_len + pad_len, 8));
 
 		return node_len + pad_len;
 	}
@@ -149,10 +142,10 @@ struct ubifs_scan_leb *ubifs_start_scan(const struct ubifs_info *c, int lnum,
 	INIT_LIST_HEAD(&sleb->nodes);
 	sleb->buf = sbuf;
 
-	err = ubi_read(c->ubi, lnum, sbuf + offs, offs, c->leb_size - offs);
+	err = ubifs_leb_read(c, lnum, sbuf + offs, offs, c->leb_size - offs, 0);
 	if (err && err != -EBADMSG) {
-		ubifs_err("cannot read %d bytes from LEB %d:%d,"
-			  " error %d", c->leb_size - offs, lnum, offs, err);
+		ubifs_err("cannot read %d bytes from LEB %d:%d, error %d",
+			  c->leb_size - offs, lnum, offs, err);
 		kfree(sleb);
 		return ERR_PTR(err);
 	}
@@ -198,7 +191,7 @@ int ubifs_add_snod(const struct ubifs_info *c, struct ubifs_scan_leb *sleb,
 	struct ubifs_ino_node *ino = buf;
 	struct ubifs_scan_node *snod;
 
-	snod = kzalloc(sizeof(struct ubifs_scan_node), GFP_NOFS);
+	snod = kmalloc(sizeof(struct ubifs_scan_node), GFP_NOFS);
 	if (!snod)
 		return -ENOMEM;
 
@@ -213,13 +206,15 @@ int ubifs_add_snod(const struct ubifs_info *c, struct ubifs_scan_leb *sleb,
 	case UBIFS_DENT_NODE:
 	case UBIFS_XENT_NODE:
 	case UBIFS_DATA_NODE:
-	case UBIFS_TRUN_NODE:
 		/*
 		 * The key is in the same place in all keyed
 		 * nodes.
 		 */
 		key_read(c, &ino->key, &snod->key);
 		break;
+	default:
+		invalid_key_init(c, &snod->key);
+		break;
 	}
 	list_add_tail(&snod->list, &sleb->nodes);
 	sleb->nodes_cnt += 1;
@@ -238,13 +233,11 @@ void ubifs_scanned_corruption(const struct ubifs_info *c, int lnum, int offs,
 {
 	int len;
 
-	ubifs_err("corrupted data at LEB %d:%d", lnum, offs);
-	if (dbg_failure_mode)
-		return;
+	ubifs_err("corruption at LEB %d:%d", lnum, offs);
 	len = c->leb_size - offs;
-	if (len > 4096)
-		len = 4096;
-	dbg_err("first %d bytes from LEB %d:%d", len, lnum, offs);
+	if (len > 8192)
+		len = 8192;
+	ubifs_err("first %d bytes from LEB %d:%d", len, lnum, offs);
 	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 4, buf, len, 1);
 }
 
@@ -253,13 +246,19 @@ void ubifs_scanned_corruption(const struct ubifs_info *c, int lnum, int offs,
  * @c: UBIFS file-system description object
  * @lnum: logical eraseblock number
  * @offs: offset to start at (usually zero)
- * @sbuf: scan buffer (must be c->leb_size)
+ * @sbuf: scan buffer (must be of @c->leb_size bytes in size)
+ * @quiet: print no messages
  *
  * This function scans LEB number @lnum and returns complete information about
- * its contents. Returns an error code in case of failure.
+ * its contents. Returns the scaned information in case of success and,
+ * %-EUCLEAN if the LEB neads recovery, and other negative error codes in case
+ * of failure.
+ *
+ * If @quiet is non-zero, this function does not print large and scary
+ * error messages and flash dumps in case of errors.
  */
 struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum,
-				  int offs, void *sbuf)
+				  int offs, void *sbuf, int quiet)
 {
 	void *buf = sbuf + offs;
 	int err, len = c->leb_size - offs;
@@ -278,8 +277,7 @@ struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum,
 
 		cond_resched();
 
-		ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 0);
-
+		ret = ubifs_scan_a_node(c, buf, len, lnum, offs, quiet);
 		if (ret > 0) {
 			/* Padding bytes or a valid padding node */
 			offs += ret;
@@ -294,17 +292,18 @@ struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum,
 
 		switch (ret) {
 		case SCANNED_GARBAGE:
-			dbg_err("garbage");
+			ubifs_err("garbage");
 			goto corrupted;
 		case SCANNED_A_NODE:
 			break;
 		case SCANNED_A_CORRUPT_NODE:
 		case SCANNED_A_BAD_PAD_NODE:
-			dbg_err("bad node");
+			ubifs_err("bad node");
 			goto corrupted;
 		default:
-			dbg_err("unknown");
-			goto corrupted;
+			ubifs_err("unknown");
+			err = -EINVAL;
+			goto error;
 		}
 
 		err = ubifs_add_snod(c, sleb, buf, offs);
@@ -317,8 +316,12 @@ struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum,
 		len -= node_len;
 	}
 
-	if (offs % c->min_io_size)
+	if (offs % c->min_io_size) {
+		if (!quiet)
+			ubifs_err("empty space starts at non-aligned offset %d",
+				  offs);
 		goto corrupted;
+	}
 
 	ubifs_end_scan(c, sleb, lnum, offs);
 
@@ -327,18 +330,25 @@ struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum,
 			break;
 	for (; len; offs++, buf++, len--)
 		if (*(uint8_t *)buf != 0xff) {
-			ubifs_err("corrupt empty space at LEB %d:%d",
-				  lnum, offs);
+			if (!quiet)
+				ubifs_err("corrupt empty space at LEB %d:%d",
+					  lnum, offs);
 			goto corrupted;
 		}
 
 	return sleb;
 
 corrupted:
-	ubifs_scanned_corruption(c, lnum, offs, buf);
+	if (!quiet) {
+		ubifs_scanned_corruption(c, lnum, offs, buf);
+		ubifs_err("LEB %d scanning failed", lnum);
+	}
 	err = -EUCLEAN;
+	ubifs_scan_destroy(sleb);
+	return ERR_PTR(err);
+
 error:
-	ubifs_err("LEB %d scanning failed", lnum);
+	ubifs_err("LEB %d scanning failed, error %d", lnum, err);
 	ubifs_scan_destroy(sleb);
 	return ERR_PTR(err);
 }
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 748ab67..9c87db4 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Artem Bityutskiy (Битюцкий Артём)
  *          Adrian Hunter
@@ -26,103 +15,45 @@
  * corresponding subsystems, but most of it is here.
  */
 
-#include "ubifs.h"
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/kthread.h>
+#include <linux/parser.h>
+#include <linux/seq_file.h>
+#include <linux/mount.h>
 #include <linux/math64.h>
+#include <linux/writeback.h>
+#else
 
-#define INODE_LOCKED_MAX	64
+#include <linux/compat.h>
+#include <linux/stat.h>
+#include <linux/err.h>
+#include "ubifs.h"
+#include <ubi_uboot.h>
+#include <mtd/ubi-user.h>
 
-struct super_block *ubifs_sb;
-static struct inode *inodes_locked_down[INODE_LOCKED_MAX];
+struct dentry;
+struct file;
+struct iattr;
+struct kstat;
+struct vfsmount;
 
-/* shrinker.c */
+#define INODE_LOCKED_MAX	64
 
-/* List of all UBIFS file-system instances */
-struct list_head ubifs_infos;
+struct super_block *ubifs_sb;
+LIST_HEAD(super_blocks);
 
-/* linux/fs/super.c */
+static struct inode *inodes_locked_down[INODE_LOCKED_MAX];
 
-static int sb_set(struct super_block *sb, void *data)
+int set_anon_super(struct super_block *s, void *data)
 {
-	dev_t *dev = data;
-
-	sb->s_dev = *dev;
 	return 0;
 }
 
-/**
- *	sget	-	find or create a superblock
- *	@type:	filesystem type superblock should belong to
- *	@test:	comparison callback
- *	@set:	setup callback
- *	@data:	argument to each of them
- */
-struct super_block *sget(struct file_system_type *type,
-			int (*test)(struct super_block *,void *),
-			int (*set)(struct super_block *,void *),
-			void *data)
-{
-	struct super_block *s = NULL;
-	int err;
-
-	s = kzalloc(sizeof(struct super_block),  GFP_USER);
-	if (!s) {
-		err = -ENOMEM;
-		return ERR_PTR(err);
-	}
-
-	INIT_LIST_HEAD(&s->s_instances);
-	INIT_LIST_HEAD(&s->s_inodes);
-	s->s_time_gran = 1000000000;
-
-	err = set(s, data);
-	if (err) {
-		return ERR_PTR(err);
-	}
-	s->s_type = type;
-	strncpy(s->s_id, type->name, sizeof(s->s_id));
-	list_add(&s->s_instances, &type->fs_supers);
-	return s;
-}
-
-/**
- * validate_inode - validate inode.
- * @c: UBIFS file-system description object
- * @inode: the inode to validate
- *
- * This is a helper function for 'ubifs_iget()' which validates various fields
- * of a newly built inode to make sure they contain sane values and prevent
- * possible vulnerabilities. Returns zero if the inode is all right and
- * a non-zero error code if not.
- */
-static int validate_inode(struct ubifs_info *c, const struct inode *inode)
-{
-	int err;
-	const struct ubifs_inode *ui = ubifs_inode(inode);
-
-	if (inode->i_size > c->max_inode_sz) {
-		ubifs_err("inode is too large (%lld)",
-			  (long long)inode->i_size);
-		return 1;
-	}
-
-	if (ui->compr_type < 0 || ui->compr_type >= UBIFS_COMPR_TYPES_CNT) {
-		ubifs_err("unknown compression type %d", ui->compr_type);
-		return 2;
-	}
-
-	if (ui->data_len < 0 || ui->data_len > UBIFS_MAX_INO_DATA)
-		return 4;
-
-	if (!ubifs_compr_present(ui->compr_type)) {
-		ubifs_warn("inode %lu uses '%s' compression, but it was not "
-			   "compiled in", inode->i_ino,
-			   ubifs_compr_name(ui->compr_type));
-	}
-
-	err = dbg_check_dir_size(c, inode);
-	return err;
-}
-
 struct inode *iget_locked(struct super_block *sb, unsigned long ino)
 {
 	struct inode *inode;
@@ -138,6 +69,10 @@ struct inode *iget_locked(struct super_block *sb, unsigned long ino)
 	return inode;
 }
 
+void iget_failed(struct inode *inode)
+{
+}
+
 int ubifs_iput(struct inode *inode)
 {
 	list_del_init(&inode->i_sb_list);
@@ -179,6 +114,125 @@ void iput(struct inode *inode)
 	inodes_locked_down[i] = ino;
 }
 
+/* from fs/inode.c */
+/**
+ * clear_nlink - directly zero an inode's link count
+ * @inode: inode
+ *
+ * This is a low-level filesystem helper to replace any
+ * direct filesystem manipulation of i_nlink.  See
+ * drop_nlink() for why we care about i_nlink hitting zero.
+ */
+void clear_nlink(struct inode *inode)
+{
+	if (inode->i_nlink) {
+		inode->__i_nlink = 0;
+		atomic_long_inc(&inode->i_sb->s_remove_count);
+	}
+}
+EXPORT_SYMBOL(clear_nlink);
+
+/**
+ * set_nlink - directly set an inode's link count
+ * @inode: inode
+ * @nlink: new nlink (should be non-zero)
+ *
+ * This is a low-level filesystem helper to replace any
+ * direct filesystem manipulation of i_nlink.
+ */
+void set_nlink(struct inode *inode, unsigned int nlink)
+{
+	if (!nlink) {
+		clear_nlink(inode);
+	} else {
+		/* Yes, some filesystems do change nlink from zero to one */
+		if (inode->i_nlink == 0)
+			atomic_long_dec(&inode->i_sb->s_remove_count);
+
+		inode->__i_nlink = nlink;
+	}
+}
+EXPORT_SYMBOL(set_nlink);
+
+/* from include/linux/fs.h */
+static inline void i_uid_write(struct inode *inode, uid_t uid)
+{
+	inode->i_uid.val = uid;
+}
+
+static inline void i_gid_write(struct inode *inode, gid_t gid)
+{
+	inode->i_gid.val = gid;
+}
+
+void unlock_new_inode(struct inode *inode)
+{
+	return;
+}
+#endif
+
+/*
+ * Maximum amount of memory we may 'kmalloc()' without worrying that we are
+ * allocating too much.
+ */
+#define UBIFS_KMALLOC_OK (128*1024)
+
+/* Slab cache for UBIFS inodes */
+struct kmem_cache *ubifs_inode_slab;
+
+#ifndef __UBOOT__
+/* UBIFS TNC shrinker description */
+static struct shrinker ubifs_shrinker_info = {
+	.scan_objects = ubifs_shrink_scan,
+	.count_objects = ubifs_shrink_count,
+	.seeks = DEFAULT_SEEKS,
+};
+#endif
+
+/**
+ * validate_inode - validate inode.
+ * @c: UBIFS file-system description object
+ * @inode: the inode to validate
+ *
+ * This is a helper function for 'ubifs_iget()' which validates various fields
+ * of a newly built inode to make sure they contain sane values and prevent
+ * possible vulnerabilities. Returns zero if the inode is all right and
+ * a non-zero error code if not.
+ */
+static int validate_inode(struct ubifs_info *c, const struct inode *inode)
+{
+	int err;
+	const struct ubifs_inode *ui = ubifs_inode(inode);
+
+	if (inode->i_size > c->max_inode_sz) {
+		ubifs_err("inode is too large (%lld)",
+			  (long long)inode->i_size);
+		return 1;
+	}
+
+	if (ui->compr_type < 0 || ui->compr_type >= UBIFS_COMPR_TYPES_CNT) {
+		ubifs_err("unknown compression type %d", ui->compr_type);
+		return 2;
+	}
+
+	if (ui->xattr_names + ui->xattr_cnt > XATTR_LIST_MAX)
+		return 3;
+
+	if (ui->data_len < 0 || ui->data_len > UBIFS_MAX_INO_DATA)
+		return 4;
+
+	if (ui->xattr && !S_ISREG(inode->i_mode))
+		return 5;
+
+	if (!ubifs_compr_present(ui->compr_type)) {
+		ubifs_warn("inode %lu uses '%s' compression, but it was not compiled in",
+			   inode->i_ino, ubifs_compr_name(ui->compr_type));
+	}
+
+	err = dbg_check_dir(c, inode);
+	return err;
+}
+
 struct inode *ubifs_iget(struct super_block *sb, unsigned long inum)
 {
 	int err;
@@ -187,10 +241,13 @@ struct inode *ubifs_iget(struct super_block *sb, unsigned long inum)
 	struct ubifs_info *c = sb->s_fs_info;
 	struct inode *inode;
 	struct ubifs_inode *ui;
+#ifdef __UBOOT__
 	int i;
+#endif
 
 	dbg_gen("inode %lu", inum);
 
+#ifdef __UBOOT__
 	/*
 	 * U-Boot special handling of locked down inodes via recovery
 	 * e.g. ubifs_recover_size()
@@ -211,6 +268,7 @@ struct inode *ubifs_iget(struct super_block *sb, unsigned long inum)
 			return inodes_locked_down[i];
 		}
 	}
+#endif
 
 	inode = iget_locked(sb, inum);
 	if (!inode)
@@ -232,9 +290,9 @@ struct inode *ubifs_iget(struct super_block *sb, unsigned long inum)
 		goto out_ino;
 
 	inode->i_flags |= (S_NOCMTIME | S_NOATIME);
-	inode->i_nlink = le32_to_cpu(ino->nlink);
-	inode->i_uid   = le32_to_cpu(ino->uid);
-	inode->i_gid   = le32_to_cpu(ino->gid);
+	set_nlink(inode, le32_to_cpu(ino->nlink));
+	i_uid_write(inode, le32_to_cpu(ino->uid));
+	i_gid_write(inode, le32_to_cpu(ino->gid));
 	inode->i_atime.tv_sec  = (int64_t)le64_to_cpu(ino->atime_sec);
 	inode->i_atime.tv_nsec = le32_to_cpu(ino->atime_nsec);
 	inode->i_mtime.tv_sec  = (int64_t)le64_to_cpu(ino->mtime_sec);
@@ -248,12 +306,101 @@ struct inode *ubifs_iget(struct super_block *sb, unsigned long inum)
 	ui->flags       = le32_to_cpu(ino->flags);
 	ui->compr_type  = le16_to_cpu(ino->compr_type);
 	ui->creat_sqnum = le64_to_cpu(ino->creat_sqnum);
+	ui->xattr_cnt   = le32_to_cpu(ino->xattr_cnt);
+	ui->xattr_size  = le32_to_cpu(ino->xattr_size);
+	ui->xattr_names = le32_to_cpu(ino->xattr_names);
 	ui->synced_i_size = ui->ui_size = inode->i_size;
 
+	ui->xattr = (ui->flags & UBIFS_XATTR_FL) ? 1 : 0;
+
 	err = validate_inode(c, inode);
 	if (err)
 		goto out_invalid;
 
+#ifndef __UBOOT__
+	/* Disable read-ahead */
+	inode->i_mapping->backing_dev_info = &c->bdi;
+
+	switch (inode->i_mode & S_IFMT) {
+	case S_IFREG:
+		inode->i_mapping->a_ops = &ubifs_file_address_operations;
+		inode->i_op = &ubifs_file_inode_operations;
+		inode->i_fop = &ubifs_file_operations;
+		if (ui->xattr) {
+			ui->data = kmalloc(ui->data_len + 1, GFP_NOFS);
+			if (!ui->data) {
+				err = -ENOMEM;
+				goto out_ino;
+			}
+			memcpy(ui->data, ino->data, ui->data_len);
+			((char *)ui->data)[ui->data_len] = '\0';
+		} else if (ui->data_len != 0) {
+			err = 10;
+			goto out_invalid;
+		}
+		break;
+	case S_IFDIR:
+		inode->i_op  = &ubifs_dir_inode_operations;
+		inode->i_fop = &ubifs_dir_operations;
+		if (ui->data_len != 0) {
+			err = 11;
+			goto out_invalid;
+		}
+		break;
+	case S_IFLNK:
+		inode->i_op = &ubifs_symlink_inode_operations;
+		if (ui->data_len <= 0 || ui->data_len > UBIFS_MAX_INO_DATA) {
+			err = 12;
+			goto out_invalid;
+		}
+		ui->data = kmalloc(ui->data_len + 1, GFP_NOFS);
+		if (!ui->data) {
+			err = -ENOMEM;
+			goto out_ino;
+		}
+		memcpy(ui->data, ino->data, ui->data_len);
+		((char *)ui->data)[ui->data_len] = '\0';
+		break;
+	case S_IFBLK:
+	case S_IFCHR:
+	{
+		dev_t rdev;
+		union ubifs_dev_desc *dev;
+
+		ui->data = kmalloc(sizeof(union ubifs_dev_desc), GFP_NOFS);
+		if (!ui->data) {
+			err = -ENOMEM;
+			goto out_ino;
+		}
+
+		dev = (union ubifs_dev_desc *)ino->data;
+		if (ui->data_len == sizeof(dev->new))
+			rdev = new_decode_dev(le32_to_cpu(dev->new));
+		else if (ui->data_len == sizeof(dev->huge))
+			rdev = huge_decode_dev(le64_to_cpu(dev->huge));
+		else {
+			err = 13;
+			goto out_invalid;
+		}
+		memcpy(ui->data, ino->data, ui->data_len);
+		inode->i_op = &ubifs_file_inode_operations;
+		init_special_inode(inode, inode->i_mode, rdev);
+		break;
+	}
+	case S_IFSOCK:
+	case S_IFIFO:
+		inode->i_op = &ubifs_file_inode_operations;
+		init_special_inode(inode, inode->i_mode, 0);
+		if (ui->data_len != 0) {
+			err = 14;
+			goto out_invalid;
+		}
+		break;
+	default:
+		err = 15;
+		goto out_invalid;
+	}
+#else
 	if ((inode->i_mode & S_IFMT) == S_IFLNK) {
 		if (ui->data_len <= 0 || ui->data_len > UBIFS_MAX_INO_DATA) {
 			err = 12;
@@ -267,23 +414,258 @@ struct inode *ubifs_iget(struct super_block *sb, unsigned long inum)
 		memcpy(ui->data, ino->data, ui->data_len);
 		((char *)ui->data)[ui->data_len] = '\0';
 	}
+#endif
 
 	kfree(ino);
-	inode->i_state &= ~(I_LOCK | I_NEW);
+#ifndef __UBOOT__
+	ubifs_set_inode_flags(inode);
+#endif
+	unlock_new_inode(inode);
 	return inode;
 
 out_invalid:
 	ubifs_err("inode %lu validation failed, error %d", inode->i_ino, err);
-	dbg_dump_node(c, ino);
-	dbg_dump_inode(c, inode);
+	ubifs_dump_node(c, ino);
+	ubifs_dump_inode(c, inode);
 	err = -EINVAL;
 out_ino:
 	kfree(ino);
 out:
 	ubifs_err("failed to read inode %lu, error %d", inode->i_ino, err);
+	iget_failed(inode);
 	return ERR_PTR(err);
 }
 
+static struct inode *ubifs_alloc_inode(struct super_block *sb)
+{
+	struct ubifs_inode *ui;
+
+	ui = kmem_cache_alloc(ubifs_inode_slab, GFP_NOFS);
+	if (!ui)
+		return NULL;
+
+	memset((void *)ui + sizeof(struct inode), 0,
+	       sizeof(struct ubifs_inode) - sizeof(struct inode));
+	mutex_init(&ui->ui_mutex);
+	spin_lock_init(&ui->ui_lock);
+	return &ui->vfs_inode;
+};
+
+#ifndef __UBOOT__
+static void ubifs_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	struct ubifs_inode *ui = ubifs_inode(inode);
+	kmem_cache_free(ubifs_inode_slab, ui);
+}
+
+static void ubifs_destroy_inode(struct inode *inode)
+{
+	struct ubifs_inode *ui = ubifs_inode(inode);
+
+	kfree(ui->data);
+	call_rcu(&inode->i_rcu, ubifs_i_callback);
+}
+
+/*
+ * Note, Linux write-back code calls this without 'i_mutex'.
+ */
+static int ubifs_write_inode(struct inode *inode, struct writeback_control *wbc)
+{
+	int err = 0;
+	struct ubifs_info *c = inode->i_sb->s_fs_info;
+	struct ubifs_inode *ui = ubifs_inode(inode);
+
+	ubifs_assert(!ui->xattr);
+	if (is_bad_inode(inode))
+		return 0;
+
+	mutex_lock(&ui->ui_mutex);
+	/*
+	 * Due to races between write-back forced by budgeting
+	 * (see 'sync_some_inodes()') and background write-back, the inode may
+	 * have already been synchronized, do not do this again. This might
+	 * also happen if it was synchronized in an VFS operation, e.g.
+	 * 'ubifs_link()'.
+	 */
+	if (!ui->dirty) {
+		mutex_unlock(&ui->ui_mutex);
+		return 0;
+	}
+
+	/*
+	 * As an optimization, do not write orphan inodes to the media just
+	 * because this is not needed.
+	 */
+	dbg_gen("inode %lu, mode %#x, nlink %u",
+		inode->i_ino, (int)inode->i_mode, inode->i_nlink);
+	if (inode->i_nlink) {
+		err = ubifs_jnl_write_inode(c, inode);
+		if (err)
+			ubifs_err("can't write inode %lu, error %d",
+				  inode->i_ino, err);
+		else
+			err = dbg_check_inode_size(c, inode, ui->ui_size);
+	}
+
+	ui->dirty = 0;
+	mutex_unlock(&ui->ui_mutex);
+	ubifs_release_dirty_inode_budget(c, ui);
+	return err;
+}
+
+static void ubifs_evict_inode(struct inode *inode)
+{
+	int err;
+	struct ubifs_info *c = inode->i_sb->s_fs_info;
+	struct ubifs_inode *ui = ubifs_inode(inode);
+
+	if (ui->xattr)
+		/*
+		 * Extended attribute inode deletions are fully handled in
+		 * 'ubifs_removexattr()'. These inodes are special and have
+		 * limited usage, so there is nothing to do here.
+		 */
+		goto out;
+
+	dbg_gen("inode %lu, mode %#x", inode->i_ino, (int)inode->i_mode);
+	ubifs_assert(!atomic_read(&inode->i_count));
+
+	truncate_inode_pages(&inode->i_data, 0);
+
+	if (inode->i_nlink)
+		goto done;
+
+	if (is_bad_inode(inode))
+		goto out;
+
+	ui->ui_size = inode->i_size = 0;
+	err = ubifs_jnl_delete_inode(c, inode);
+	if (err)
+		/*
+		 * Worst case we have a lost orphan inode wasting space, so a
+		 * simple error message is OK here.
+		 */
+		ubifs_err("can't delete inode %lu, error %d",
+			  inode->i_ino, err);
+
+out:
+	if (ui->dirty)
+		ubifs_release_dirty_inode_budget(c, ui);
+	else {
+		/* We've deleted something - clean the "no space" flags */
+		c->bi.nospace = c->bi.nospace_rp = 0;
+		smp_wmb();
+	}
+done:
+	clear_inode(inode);
+}
+#endif
+
+static void ubifs_dirty_inode(struct inode *inode, int flags)
+{
+	struct ubifs_inode *ui = ubifs_inode(inode);
+
+	ubifs_assert(mutex_is_locked(&ui->ui_mutex));
+	if (!ui->dirty) {
+		ui->dirty = 1;
+		dbg_gen("inode %lu",  inode->i_ino);
+	}
+}
+
+#ifndef __UBOOT__
+static int ubifs_statfs(struct dentry *dentry, struct kstatfs *buf)
+{
+	struct ubifs_info *c = dentry->d_sb->s_fs_info;
+	unsigned long long free;
+	__le32 *uuid = (__le32 *)c->uuid;
+
+	free = ubifs_get_free_space(c);
+	dbg_gen("free space %lld bytes (%lld blocks)",
+		free, free >> UBIFS_BLOCK_SHIFT);
+
+	buf->f_type = UBIFS_SUPER_MAGIC;
+	buf->f_bsize = UBIFS_BLOCK_SIZE;
+	buf->f_blocks = c->block_cnt;
+	buf->f_bfree = free >> UBIFS_BLOCK_SHIFT;
+	if (free > c->report_rp_size)
+		buf->f_bavail = (free - c->report_rp_size) >> UBIFS_BLOCK_SHIFT;
+	else
+		buf->f_bavail = 0;
+	buf->f_files = 0;
+	buf->f_ffree = 0;
+	buf->f_namelen = UBIFS_MAX_NLEN;
+	buf->f_fsid.val[0] = le32_to_cpu(uuid[0]) ^ le32_to_cpu(uuid[2]);
+	buf->f_fsid.val[1] = le32_to_cpu(uuid[1]) ^ le32_to_cpu(uuid[3]);
+	ubifs_assert(buf->f_bfree <= c->block_cnt);
+	return 0;
+}
+
+static int ubifs_show_options(struct seq_file *s, struct dentry *root)
+{
+	struct ubifs_info *c = root->d_sb->s_fs_info;
+
+	if (c->mount_opts.unmount_mode == 2)
+		seq_printf(s, ",fast_unmount");
+	else if (c->mount_opts.unmount_mode == 1)
+		seq_printf(s, ",norm_unmount");
+
+	if (c->mount_opts.bulk_read == 2)
+		seq_printf(s, ",bulk_read");
+	else if (c->mount_opts.bulk_read == 1)
+		seq_printf(s, ",no_bulk_read");
+
+	if (c->mount_opts.chk_data_crc == 2)
+		seq_printf(s, ",chk_data_crc");
+	else if (c->mount_opts.chk_data_crc == 1)
+		seq_printf(s, ",no_chk_data_crc");
+
+	if (c->mount_opts.override_compr) {
+		seq_printf(s, ",compr=%s",
+			   ubifs_compr_name(c->mount_opts.compr_type));
+	}
+
+	return 0;
+}
+
+static int ubifs_sync_fs(struct super_block *sb, int wait)
+{
+	int i, err;
+	struct ubifs_info *c = sb->s_fs_info;
+
+	/*
+	 * Zero @wait is just an advisory thing to help the file system shove
+	 * lots of data into the queues, and there will be the second
+	 * '->sync_fs()' call, with non-zero @wait.
+	 */
+	if (!wait)
+		return 0;
+
+	/*
+	 * Synchronize write buffers, because 'ubifs_run_commit()' does not
+	 * do this if it waits for an already running commit.
+	 */
+	for (i = 0; i < c->jhead_cnt; i++) {
+		err = ubifs_wbuf_sync(&c->jheads[i].wbuf);
+		if (err)
+			return err;
+	}
+
+	/*
+	 * Strictly speaking, it is not necessary to commit the journal here,
+	 * synchronizing write-buffers would be enough. But committing makes
+	 * UBIFS free space predictions much more accurate, so we want to let
+	 * the user be able to get more accurate results of 'statfs()' after
+	 * they synchronize the file system.
+	 */
+	err = ubifs_run_commit(c);
+	if (err)
+		return err;
+
+	return ubi_sync(c->vi.ubi_num);
+}
+#endif
+
 /**
  * init_constants_early - initialize UBIFS constants.
  * @c: UBIFS file-system description object
@@ -312,9 +694,12 @@ static int init_constants_early(struct ubifs_info *c)
 
 	c->leb_cnt = c->vi.size;
 	c->leb_size = c->vi.usable_leb_size;
+	c->leb_start = c->di.leb_start;
 	c->half_leb_size = c->leb_size / 2;
 	c->min_io_size = c->di.min_io_size;
 	c->min_io_shift = fls(c->min_io_size) - 1;
+	c->max_write_size = c->di.max_write_size;
+	c->max_write_shift = fls(c->max_write_size) - 1;
 
 	if (c->leb_size < UBIFS_MIN_LEB_SZ) {
 		ubifs_err("too small LEBs (%d bytes), min. is %d bytes",
@@ -334,6 +719,18 @@ static int init_constants_early(struct ubifs_info *c)
 	}
 
 	/*
+	 * Maximum write size has to be greater or equivalent to min. I/O
+	 * size, and be multiple of min. I/O size.
+	 */
+	if (c->max_write_size < c->min_io_size ||
+	    c->max_write_size % c->min_io_size ||
+	    !is_power_of_2(c->max_write_size)) {
+		ubifs_err("bad write buffer size %d for %d min. I/O unit",
+			  c->max_write_size, c->min_io_size);
+		return -EINVAL;
+	}
+
+	/*
 	 * UBIFS aligns all node to 8-byte boundary, so to make function in
 	 * io.c simpler, assume minimum I/O unit size to be 8 bytes if it is
 	 * less than 8.
@@ -341,6 +738,10 @@ static int init_constants_early(struct ubifs_info *c)
 	if (c->min_io_size < 8) {
 		c->min_io_size = 8;
 		c->min_io_shift = 3;
+		if (c->max_write_size < c->min_io_size) {
+			c->max_write_size = c->min_io_size;
+			c->max_write_shift = c->min_io_shift;
+		}
 	}
 
 	c->ref_node_alsz = ALIGN(UBIFS_REF_NODE_SZ, c->min_io_size);
@@ -393,9 +794,33 @@ static int init_constants_early(struct ubifs_info *c)
 	 */
 	c->leb_overhead = c->leb_size % UBIFS_MAX_DATA_NODE_SZ;
 
+	/* Buffer size for bulk-reads */
+	c->max_bu_buf_len = UBIFS_MAX_BULK_READ * UBIFS_MAX_DATA_NODE_SZ;
+	if (c->max_bu_buf_len > c->leb_size)
+		c->max_bu_buf_len = c->leb_size;
 	return 0;
 }
 
+/**
+ * bud_wbuf_callback - bud LEB write-buffer synchronization call-back.
+ * @c: UBIFS file-system description object
+ * @lnum: LEB the write-buffer was synchronized to
+ * @free: how many free bytes left in this LEB
+ * @pad: how many bytes were padded
+ *
+ * This is a callback function which is called by the I/O unit when the
+ * write-buffer is synchronized. We need this to correctly maintain space
+ * accounting in bud logical eraseblocks. This function returns zero in case of
+ * success and a negative error code in case of failure.
+ *
+ * This function actually belongs to the journal, but we keep it here because
+ * we want to keep it static.
+ */
+static int bud_wbuf_callback(struct ubifs_info *c, int lnum, int free, int pad)
+{
+	return ubifs_update_one_lp(c, lnum, free, pad, 0, 0);
+}
+
 /*
  * init_constants_sb - initialize UBIFS constants.
  * @c: UBIFS file-system description object
@@ -426,8 +851,8 @@ static int init_constants_sb(struct ubifs_info *c)
 	tmp = UBIFS_CS_NODE_SZ + UBIFS_REF_NODE_SZ * c->jhead_cnt;
 	tmp = ALIGN(tmp, c->min_io_size);
 	if (tmp > c->leb_size) {
-		dbg_err("too small LEB size %d, at least %d needed",
-			c->leb_size, tmp);
+		ubifs_err("too small LEB size %d, at least %d needed",
+			  c->leb_size, tmp);
 		return -EINVAL;
 	}
 
@@ -441,8 +866,8 @@ static int init_constants_sb(struct ubifs_info *c)
 	tmp /= c->leb_size;
 	tmp += 1;
 	if (c->log_lebs < tmp) {
-		dbg_err("too small log %d LEBs, required min. %d LEBs",
-			c->log_lebs, tmp);
+		ubifs_err("too small log %d LEBs, required min. %d LEBs",
+			  c->log_lebs, tmp);
 		return -EINVAL;
 	}
 
@@ -451,11 +876,11 @@ static int init_constants_sb(struct ubifs_info *c)
 	 * be compressed and direntries are of the maximum size.
 	 *
 	 * Note, data, which may be stored in inodes is budgeted separately, so
-	 * it is not included into 'c->inode_budget'.
+	 * it is not included into 'c->bi.inode_budget'.
 	 */
-	c->page_budget = UBIFS_MAX_DATA_NODE_SZ * UBIFS_BLOCKS_PER_PAGE;
-	c->inode_budget = UBIFS_INO_NODE_SZ;
-	c->dent_budget = UBIFS_MAX_DENT_NODE_SZ;
+	c->bi.page_budget = UBIFS_MAX_DATA_NODE_SZ * UBIFS_BLOCKS_PER_PAGE;
+	c->bi.inode_budget = UBIFS_INO_NODE_SZ;
+	c->bi.dent_budget = UBIFS_MAX_DENT_NODE_SZ;
 
 	/*
 	 * When the amount of flash space used by buds becomes
@@ -482,6 +907,8 @@ static int init_constants_sb(struct ubifs_info *c)
 	if (err)
 		return err;
 
+	/* Initialize effective LEB size used in budgeting calculations */
+	c->idx_leb_size = c->leb_size - c->max_idx_node_sz;
 	return 0;
 }
 
@@ -497,7 +924,8 @@ static void init_constants_master(struct ubifs_info *c)
 {
 	long long tmp64;
 
-	c->min_idx_lebs = ubifs_calc_min_idx_lebs(c);
+	c->bi.min_idx_lebs = ubifs_calc_min_idx_lebs(c);
+	c->report_rp_size = ubifs_reported_space(c, c->rp_size);
 
 	/*
 	 * Calculate total amount of FS blocks. This number is not used
@@ -515,6 +943,88 @@ static void init_constants_master(struct ubifs_info *c)
 }
 
 /**
+ * take_gc_lnum - reserve GC LEB.
+ * @c: UBIFS file-system description object
+ *
+ * This function ensures that the LEB reserved for garbage collection is marked
+ * as "taken" in lprops. We also have to set free space to LEB size and dirty
+ * space to zero, because lprops may contain out-of-date information if the
+ * file-system was un-mounted before it has been committed. This function
+ * returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+static int take_gc_lnum(struct ubifs_info *c)
+{
+	int err;
+
+	if (c->gc_lnum == -1) {
+		ubifs_err("no LEB for GC");
+		return -EINVAL;
+	}
+
+	/* And we have to tell lprops that this LEB is taken */
+	err = ubifs_change_one_lp(c, c->gc_lnum, c->leb_size, 0,
+				  LPROPS_TAKEN, 0, 0);
+	return err;
+}
+
+/**
+ * alloc_wbufs - allocate write-buffers.
+ * @c: UBIFS file-system description object
+ *
+ * This helper function allocates and initializes UBIFS write-buffers. Returns
+ * zero in case of success and %-ENOMEM in case of failure.
+ */
+static int alloc_wbufs(struct ubifs_info *c)
+{
+	int i, err;
+
+	c->jheads = kzalloc(c->jhead_cnt * sizeof(struct ubifs_jhead),
+			   GFP_KERNEL);
+	if (!c->jheads)
+		return -ENOMEM;
+
+	/* Initialize journal heads */
+	for (i = 0; i < c->jhead_cnt; i++) {
+		INIT_LIST_HEAD(&c->jheads[i].buds_list);
+		err = ubifs_wbuf_init(c, &c->jheads[i].wbuf);
+		if (err)
+			return err;
+
+		c->jheads[i].wbuf.sync_callback = &bud_wbuf_callback;
+		c->jheads[i].wbuf.jhead = i;
+		c->jheads[i].grouped = 1;
+	}
+
+	/*
+	 * Garbage Collector head does not need to be synchronized by timer.
+	 * Also GC head nodes are not grouped.
+	 */
+	c->jheads[GCHD].wbuf.no_timer = 1;
+	c->jheads[GCHD].grouped = 0;
+
+	return 0;
+}
+
+/**
+ * free_wbufs - free write-buffers.
+ * @c: UBIFS file-system description object
+ */
+static void free_wbufs(struct ubifs_info *c)
+{
+	int i;
+
+	if (c->jheads) {
+		for (i = 0; i < c->jhead_cnt; i++) {
+			kfree(c->jheads[i].wbuf.buf);
+			kfree(c->jheads[i].wbuf.inodes);
+		}
+		kfree(c->jheads);
+		c->jheads = NULL;
+	}
+}
+
+/**
  * free_orphans - free orphans.
  * @c: UBIFS file-system description object
  */
@@ -533,13 +1043,27 @@ static void free_orphans(struct ubifs_info *c)
 		orph = list_entry(c->orph_list.next, struct ubifs_orphan, list);
 		list_del(&orph->list);
 		kfree(orph);
-		dbg_err("orphan list not empty at unmount");
+		ubifs_err("orphan list not empty at unmount");
 	}
 
 	vfree(c->orph_buf);
 	c->orph_buf = NULL;
 }
 
+#ifndef __UBOOT__
+/**
+ * free_buds - free per-bud objects.
+ * @c: UBIFS file-system description object
+ */
+static void free_buds(struct ubifs_info *c)
+{
+	struct ubifs_bud *bud, *n;
+
+	rbtree_postorder_for_each_entry_safe(bud, n, &c->buds, rb)
+		kfree(bud);
+}
+#endif
+
 /**
  * check_volume_empty - check if the UBI volume is empty.
  * @c: UBIFS file-system description object
@@ -555,7 +1079,7 @@ static int check_volume_empty(struct ubifs_info *c)
 
 	c->empty = 1;
 	for (lnum = 0; lnum < c->leb_cnt; lnum++) {
-		err = ubi_is_mapped(c->ubi, lnum);
+		err = ubifs_is_mapped(c, lnum);
 		if (unlikely(err < 0))
 			return err;
 		if (err == 1) {
@@ -569,23 +1093,258 @@ static int check_volume_empty(struct ubifs_info *c)
 	return 0;
 }
 
+/*
+ * UBIFS mount options.
+ *
+ * Opt_fast_unmount: do not run a journal commit before un-mounting
+ * Opt_norm_unmount: run a journal commit before un-mounting
+ * Opt_bulk_read: enable bulk-reads
+ * Opt_no_bulk_read: disable bulk-reads
+ * Opt_chk_data_crc: check CRCs when reading data nodes
+ * Opt_no_chk_data_crc: do not check CRCs when reading data nodes
+ * Opt_override_compr: override default compressor
+ * Opt_err: just end of array marker
+ */
+enum {
+	Opt_fast_unmount,
+	Opt_norm_unmount,
+	Opt_bulk_read,
+	Opt_no_bulk_read,
+	Opt_chk_data_crc,
+	Opt_no_chk_data_crc,
+	Opt_override_compr,
+	Opt_err,
+};
+
+#ifndef __UBOOT__
+static const match_table_t tokens = {
+	{Opt_fast_unmount, "fast_unmount"},
+	{Opt_norm_unmount, "norm_unmount"},
+	{Opt_bulk_read, "bulk_read"},
+	{Opt_no_bulk_read, "no_bulk_read"},
+	{Opt_chk_data_crc, "chk_data_crc"},
+	{Opt_no_chk_data_crc, "no_chk_data_crc"},
+	{Opt_override_compr, "compr=%s"},
+	{Opt_err, NULL},
+};
+
+/**
+ * parse_standard_option - parse a standard mount option.
+ * @option: the option to parse
+ *
+ * Normally, standard mount options like "sync" are passed to file-systems as
+ * flags. However, when a "rootflags=" kernel boot parameter is used, they may
+ * be present in the options string. This function tries to deal with this
+ * situation and parse standard options. Returns 0 if the option was not
+ * recognized, and the corresponding integer flag if it was.
+ *
+ * UBIFS is only interested in the "sync" option, so do not check for anything
+ * else.
+ */
+static int parse_standard_option(const char *option)
+{
+	ubifs_msg("parse %s", option);
+	if (!strcmp(option, "sync"))
+		return MS_SYNCHRONOUS;
+	return 0;
+}
+
+/**
+ * ubifs_parse_options - parse mount parameters.
+ * @c: UBIFS file-system description object
+ * @options: parameters to parse
+ * @is_remount: non-zero if this is FS re-mount
+ *
+ * This function parses UBIFS mount options and returns zero in case success
+ * and a negative error code in case of failure.
+ */
+static int ubifs_parse_options(struct ubifs_info *c, char *options,
+			       int is_remount)
+{
+	char *p;
+	substring_t args[MAX_OPT_ARGS];
+
+	if (!options)
+		return 0;
+
+	while ((p = strsep(&options, ","))) {
+		int token;
+
+		if (!*p)
+			continue;
+
+		token = match_token(p, tokens, args);
+		switch (token) {
+		/*
+		 * %Opt_fast_unmount and %Opt_norm_unmount options are ignored.
+		 * We accept them in order to be backward-compatible. But this
+		 * should be removed at some point.
+		 */
+		case Opt_fast_unmount:
+			c->mount_opts.unmount_mode = 2;
+			break;
+		case Opt_norm_unmount:
+			c->mount_opts.unmount_mode = 1;
+			break;
+		case Opt_bulk_read:
+			c->mount_opts.bulk_read = 2;
+			c->bulk_read = 1;
+			break;
+		case Opt_no_bulk_read:
+			c->mount_opts.bulk_read = 1;
+			c->bulk_read = 0;
+			break;
+		case Opt_chk_data_crc:
+			c->mount_opts.chk_data_crc = 2;
+			c->no_chk_data_crc = 0;
+			break;
+		case Opt_no_chk_data_crc:
+			c->mount_opts.chk_data_crc = 1;
+			c->no_chk_data_crc = 1;
+			break;
+		case Opt_override_compr:
+		{
+			char *name = match_strdup(&args[0]);
+
+			if (!name)
+				return -ENOMEM;
+			if (!strcmp(name, "none"))
+				c->mount_opts.compr_type = UBIFS_COMPR_NONE;
+			else if (!strcmp(name, "lzo"))
+				c->mount_opts.compr_type = UBIFS_COMPR_LZO;
+			else if (!strcmp(name, "zlib"))
+				c->mount_opts.compr_type = UBIFS_COMPR_ZLIB;
+			else {
+				ubifs_err("unknown compressor \"%s\"", name);
+				kfree(name);
+				return -EINVAL;
+			}
+			kfree(name);
+			c->mount_opts.override_compr = 1;
+			c->default_compr = c->mount_opts.compr_type;
+			break;
+		}
+		default:
+		{
+			unsigned long flag;
+			struct super_block *sb = c->vfs_sb;
+
+			flag = parse_standard_option(p);
+			if (!flag) {
+				ubifs_err("unrecognized mount option \"%s\" or missing value",
+					  p);
+				return -EINVAL;
+			}
+			sb->s_flags |= flag;
+			break;
+		}
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * destroy_journal - destroy journal data structures.
+ * @c: UBIFS file-system description object
+ *
+ * This function destroys journal data structures including those that may have
+ * been created by recovery functions.
+ */
+static void destroy_journal(struct ubifs_info *c)
+{
+	while (!list_empty(&c->unclean_leb_list)) {
+		struct ubifs_unclean_leb *ucleb;
+
+		ucleb = list_entry(c->unclean_leb_list.next,
+				   struct ubifs_unclean_leb, list);
+		list_del(&ucleb->list);
+		kfree(ucleb);
+	}
+	while (!list_empty(&c->old_buds)) {
+		struct ubifs_bud *bud;
+
+		bud = list_entry(c->old_buds.next, struct ubifs_bud, list);
+		list_del(&bud->list);
+		kfree(bud);
+	}
+	ubifs_destroy_idx_gc(c);
+	ubifs_destroy_size_tree(c);
+	ubifs_tnc_close(c);
+	free_buds(c);
+}
+#endif
+
+/**
+ * bu_init - initialize bulk-read information.
+ * @c: UBIFS file-system description object
+ */
+static void bu_init(struct ubifs_info *c)
+{
+	ubifs_assert(c->bulk_read == 1);
+
+	if (c->bu.buf)
+		return; /* Already initialized */
+
+again:
+	c->bu.buf = kmalloc(c->max_bu_buf_len, GFP_KERNEL | __GFP_NOWARN);
+	if (!c->bu.buf) {
+		if (c->max_bu_buf_len > UBIFS_KMALLOC_OK) {
+			c->max_bu_buf_len = UBIFS_KMALLOC_OK;
+			goto again;
+		}
+
+		/* Just disable bulk-read */
+		ubifs_warn("cannot allocate %d bytes of memory for bulk-read, disabling it",
+			   c->max_bu_buf_len);
+		c->mount_opts.bulk_read = 1;
+		c->bulk_read = 0;
+		return;
+	}
+}
+
+#ifndef __UBOOT__
+/**
+ * check_free_space - check if there is enough free space to mount.
+ * @c: UBIFS file-system description object
+ *
+ * This function makes sure UBIFS has enough free space to be mounted in
+ * read/write mode. UBIFS must always have some free space to allow deletions.
+ */
+static int check_free_space(struct ubifs_info *c)
+{
+	ubifs_assert(c->dark_wm > 0);
+	if (c->lst.total_free + c->lst.total_dirty < c->dark_wm) {
+		ubifs_err("insufficient free space to mount in R/W mode");
+		ubifs_dump_budg(c, &c->bi);
+		ubifs_dump_lprops(c);
+		return -ENOSPC;
+	}
+	return 0;
+}
+#endif
+
 /**
  * mount_ubifs - mount UBIFS file-system.
  * @c: UBIFS file-system description object
  *
  * This function mounts UBIFS file system. Returns zero in case of success and
  * a negative error code in case of failure.
- *
- * Note, the function does not de-allocate resources it it fails half way
- * through, and the caller has to do this instead.
  */
 static int mount_ubifs(struct ubifs_info *c)
 {
-	struct super_block *sb = c->vfs_sb;
-	int err, mounted_read_only = (sb->s_flags & MS_RDONLY);
-	long long x;
+	int err;
+	long long x, y;
 	size_t sz;
 
+	c->ro_mount = !!(c->vfs_sb->s_flags & MS_RDONLY);
+#ifdef __UBOOT__
+	if (!c->ro_mount) {
+		printf("UBIFS: only ro mode in U-Boot allowed.\n");
+		return -EACCES;
+	}
+#endif
+
 	err = init_constants_early(c);
 	if (err)
 		return err;
@@ -598,7 +1357,7 @@ static int mount_ubifs(struct ubifs_info *c)
 	if (err)
 		goto out_free;
 
-	if (c->empty && (mounted_read_only || c->ro_media)) {
+	if (c->empty && (c->ro_mount || c->ro_media)) {
 		/*
 		 * This UBI volume is empty, and read-only, or the file system
 		 * is mounted read-only - we cannot format it.
@@ -609,7 +1368,7 @@ static int mount_ubifs(struct ubifs_info *c)
 		goto out_free;
 	}
 
-	if (c->ro_media && !mounted_read_only) {
+	if (c->ro_media && !c->ro_mount) {
 		ubifs_err("cannot mount read-write - read-only media");
 		err = -EROFS;
 		goto out_free;
@@ -629,11 +1388,27 @@ static int mount_ubifs(struct ubifs_info *c)
 	if (!c->sbuf)
 		goto out_free;
 
-	/*
-	 * We have to check all CRCs, even for data nodes, when we mount the FS
-	 * (specifically, when we are replaying).
-	 */
-	c->always_chk_crc = 1;
+#ifndef __UBOOT__
+	if (!c->ro_mount) {
+		c->ileb_buf = vmalloc(c->leb_size);
+		if (!c->ileb_buf)
+			goto out_free;
+	}
+#endif
+
+	if (c->bulk_read == 1)
+		bu_init(c);
+
+#ifndef __UBOOT__
+	if (!c->ro_mount) {
+		c->write_reserve_buf = kmalloc(COMPRESSED_DATA_NODE_BUF_SZ,
+					       GFP_KERNEL);
+		if (!c->write_reserve_buf)
+			goto out_free;
+	}
+#endif
+
+	c->mounting = 1;
 
 	err = ubifs_read_superblock(c);
 	if (err)
@@ -646,11 +1421,10 @@ static int mount_ubifs(struct ubifs_info *c)
 	if (!ubifs_compr_present(c->default_compr)) {
 		ubifs_err("'compressor \"%s\" is not compiled in",
 			  ubifs_compr_name(c->default_compr));
+		err = -ENOTSUPP;
 		goto out_free;
 	}
 
-	dbg_failure_mode_registration(c);
-
 	err = init_constants_sb(c);
 	if (err)
 		goto out_free;
@@ -663,7 +1437,25 @@ static int mount_ubifs(struct ubifs_info *c)
 		goto out_free;
 	}
 
+	err = alloc_wbufs(c);
+	if (err)
+		goto out_cbuf;
+
 	sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num, c->vi.vol_id);
+#ifndef __UBOOT__
+	if (!c->ro_mount) {
+		/* Create background thread */
+		c->bgt = kthread_create(ubifs_bg_thread, c, "%s", c->bgt_name);
+		if (IS_ERR(c->bgt)) {
+			err = PTR_ERR(c->bgt);
+			c->bgt = NULL;
+			ubifs_err("cannot spawn \"%s\", error %d",
+				  c->bgt_name, err);
+			goto out_wbufs;
+		}
+		wake_up_process(c->bgt);
+	}
+#endif
 
 	err = ubifs_read_master(c);
 	if (err)
@@ -676,204 +1468,694 @@ static int mount_ubifs(struct ubifs_info *c)
 		c->need_recovery = 1;
 	}
 
-	err = ubifs_lpt_init(c, 1, !mounted_read_only);
+#ifndef __UBOOT__
+	if (c->need_recovery && !c->ro_mount) {
+		err = ubifs_recover_inl_heads(c, c->sbuf);
+		if (err)
+			goto out_master;
+	}
+#endif
+
+	err = ubifs_lpt_init(c, 1, !c->ro_mount);
 	if (err)
-		goto out_lpt;
+		goto out_master;
+
+#ifndef __UBOOT__
+	if (!c->ro_mount && c->space_fixup) {
+		err = ubifs_fixup_free_space(c);
+		if (err)
+			goto out_lpt;
+	}
+
+	if (!c->ro_mount) {
+		/*
+		 * Set the "dirty" flag so that if we reboot uncleanly we
+		 * will notice this immediately on the next mount.
+		 */
+		c->mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY);
+		err = ubifs_write_master(c);
+		if (err)
+			goto out_lpt;
+	}
+#endif
 
-	err = dbg_check_idx_size(c, c->old_idx_sz);
+	err = dbg_check_idx_size(c, c->bi.old_idx_sz);
 	if (err)
 		goto out_lpt;
 
+#ifndef __UBOOT__
 	err = ubifs_replay_journal(c);
 	if (err)
 		goto out_journal;
+#endif
+
+	/* Calculate 'min_idx_lebs' after journal replay */
+	c->bi.min_idx_lebs = ubifs_calc_min_idx_lebs(c);
 
-	err = ubifs_mount_orphans(c, c->need_recovery, mounted_read_only);
+	err = ubifs_mount_orphans(c, c->need_recovery, c->ro_mount);
 	if (err)
 		goto out_orphans;
 
-	if (c->need_recovery) {
+	if (!c->ro_mount) {
+#ifndef __UBOOT__
+		int lnum;
+
+		err = check_free_space(c);
+		if (err)
+			goto out_orphans;
+
+		/* Check for enough log space */
+		lnum = c->lhead_lnum + 1;
+		if (lnum >= UBIFS_LOG_LNUM + c->log_lebs)
+			lnum = UBIFS_LOG_LNUM;
+		if (lnum == c->ltail_lnum) {
+			err = ubifs_consolidate_log(c);
+			if (err)
+				goto out_orphans;
+		}
+
+		if (c->need_recovery) {
+			err = ubifs_recover_size(c);
+			if (err)
+				goto out_orphans;
+			err = ubifs_rcvry_gc_commit(c);
+			if (err)
+				goto out_orphans;
+		} else {
+			err = take_gc_lnum(c);
+			if (err)
+				goto out_orphans;
+
+			/*
+			 * GC LEB may contain garbage if there was an unclean
+			 * reboot, and it should be un-mapped.
+			 */
+			err = ubifs_leb_unmap(c, c->gc_lnum);
+			if (err)
+				goto out_orphans;
+		}
+
+		err = dbg_check_lprops(c);
+		if (err)
+			goto out_orphans;
+#endif
+	} else if (c->need_recovery) {
 		err = ubifs_recover_size(c);
 		if (err)
 			goto out_orphans;
+	} else {
+		/*
+		 * Even if we mount read-only, we have to set space in GC LEB
+		 * to proper value because this affects UBIFS free space
+		 * reporting. We do not want to have a situation when
+		 * re-mounting from R/O to R/W changes amount of free space.
+		 */
+		err = take_gc_lnum(c);
+		if (err)
+			goto out_orphans;
 	}
 
+#ifndef __UBOOT__
 	spin_lock(&ubifs_infos_lock);
 	list_add_tail(&c->infos_list, &ubifs_infos);
 	spin_unlock(&ubifs_infos_lock);
+#endif
 
 	if (c->need_recovery) {
-		if (mounted_read_only)
+		if (c->ro_mount)
 			ubifs_msg("recovery deferred");
 		else {
 			c->need_recovery = 0;
 			ubifs_msg("recovery completed");
+			/*
+			 * GC LEB has to be empty and taken at this point. But
+			 * the journal head LEBs may also be accounted as
+			 * "empty taken" if they are empty.
+			 */
+			ubifs_assert(c->lst.taken_empty_lebs > 0);
 		}
-	}
+	} else
+		ubifs_assert(c->lst.taken_empty_lebs > 0);
 
 	err = dbg_check_filesystem(c);
 	if (err)
 		goto out_infos;
 
-	c->always_chk_crc = 0;
+	err = dbg_debugfs_init_fs(c);
+	if (err)
+		goto out_infos;
+
+	c->mounting = 0;
 
-	ubifs_msg("mounted UBI device %d, volume %d, name \"%s\"",
-		  c->vi.ubi_num, c->vi.vol_id, c->vi.name);
-	if (mounted_read_only)
-		ubifs_msg("mounted read-only");
+	ubifs_msg("mounted UBI device %d, volume %d, name \"%s\"%s",
+		  c->vi.ubi_num, c->vi.vol_id, c->vi.name,
+		  c->ro_mount ? ", R/O mode" : "");
 	x = (long long)c->main_lebs * c->leb_size;
-	ubifs_msg("file system size:   %lld bytes (%lld KiB, %lld MiB, %d "
-		  "LEBs)", x, x >> 10, x >> 20, c->main_lebs);
-	x = (long long)c->log_lebs * c->leb_size + c->max_bud_bytes;
-	ubifs_msg("journal size:       %lld bytes (%lld KiB, %lld MiB, %d "
-		  "LEBs)", x, x >> 10, x >> 20, c->log_lebs + c->max_bud_cnt);
-	ubifs_msg("media format:       w%d/r%d (latest is w%d/r%d)",
+	y = (long long)c->log_lebs * c->leb_size + c->max_bud_bytes;
+	ubifs_msg("LEB size: %d bytes (%d KiB), min./max. I/O unit sizes: %d bytes/%d bytes",
+		  c->leb_size, c->leb_size >> 10, c->min_io_size,
+		  c->max_write_size);
+	ubifs_msg("FS size: %lld bytes (%lld MiB, %d LEBs), journal size %lld bytes (%lld MiB, %d LEBs)",
+		  x, x >> 20, c->main_lebs,
+		  y, y >> 20, c->log_lebs + c->max_bud_cnt);
+	ubifs_msg("reserved for root: %llu bytes (%llu KiB)",
+		  c->report_rp_size, c->report_rp_size >> 10);
+	ubifs_msg("media format: w%d/r%d (latest is w%d/r%d), UUID %pUB%s",
 		  c->fmt_version, c->ro_compat_version,
-		  UBIFS_FORMAT_VERSION, UBIFS_RO_COMPAT_VERSION);
-	ubifs_msg("default compressor: %s", ubifs_compr_name(c->default_compr));
-	ubifs_msg("reserved for root:  %llu bytes (%llu KiB)",
-		c->report_rp_size, c->report_rp_size >> 10);
-
-	dbg_msg("min. I/O unit size:  %d bytes", c->min_io_size);
-	dbg_msg("LEB size:            %d bytes (%d KiB)",
-		c->leb_size, c->leb_size >> 10);
-	dbg_msg("data journal heads:  %d",
+		  UBIFS_FORMAT_VERSION, UBIFS_RO_COMPAT_VERSION, c->uuid,
+		  c->big_lpt ? ", big LPT model" : ", small LPT model");
+
+	dbg_gen("default compressor:  %s", ubifs_compr_name(c->default_compr));
+	dbg_gen("data journal heads:  %d",
 		c->jhead_cnt - NONDATA_JHEADS_CNT);
-	dbg_msg("UUID:                %02X%02X%02X%02X-%02X%02X"
-	       "-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X",
-	       c->uuid[0], c->uuid[1], c->uuid[2], c->uuid[3],
-	       c->uuid[4], c->uuid[5], c->uuid[6], c->uuid[7],
-	       c->uuid[8], c->uuid[9], c->uuid[10], c->uuid[11],
-	       c->uuid[12], c->uuid[13], c->uuid[14], c->uuid[15]);
-	dbg_msg("big_lpt              %d", c->big_lpt);
-	dbg_msg("log LEBs:            %d (%d - %d)",
+	dbg_gen("log LEBs:            %d (%d - %d)",
 		c->log_lebs, UBIFS_LOG_LNUM, c->log_last);
-	dbg_msg("LPT area LEBs:       %d (%d - %d)",
+	dbg_gen("LPT area LEBs:       %d (%d - %d)",
 		c->lpt_lebs, c->lpt_first, c->lpt_last);
-	dbg_msg("orphan area LEBs:    %d (%d - %d)",
+	dbg_gen("orphan area LEBs:    %d (%d - %d)",
 		c->orph_lebs, c->orph_first, c->orph_last);
-	dbg_msg("main area LEBs:      %d (%d - %d)",
+	dbg_gen("main area LEBs:      %d (%d - %d)",
 		c->main_lebs, c->main_first, c->leb_cnt - 1);
-	dbg_msg("index LEBs:          %d", c->lst.idx_lebs);
-	dbg_msg("total index bytes:   %lld (%lld KiB, %lld MiB)",
-		c->old_idx_sz, c->old_idx_sz >> 10, c->old_idx_sz >> 20);
-	dbg_msg("key hash type:       %d", c->key_hash_type);
-	dbg_msg("tree fanout:         %d", c->fanout);
-	dbg_msg("reserved GC LEB:     %d", c->gc_lnum);
-	dbg_msg("first main LEB:      %d", c->main_first);
-	dbg_msg("max. znode size      %d", c->max_znode_sz);
-	dbg_msg("max. index node size %d", c->max_idx_node_sz);
-	dbg_msg("node sizes:          data %zu, inode %zu, dentry %zu",
+	dbg_gen("index LEBs:          %d", c->lst.idx_lebs);
+	dbg_gen("total index bytes:   %lld (%lld KiB, %lld MiB)",
+		c->bi.old_idx_sz, c->bi.old_idx_sz >> 10,
+		c->bi.old_idx_sz >> 20);
+	dbg_gen("key hash type:       %d", c->key_hash_type);
+	dbg_gen("tree fanout:         %d", c->fanout);
+	dbg_gen("reserved GC LEB:     %d", c->gc_lnum);
+	dbg_gen("max. znode size      %d", c->max_znode_sz);
+	dbg_gen("max. index node size %d", c->max_idx_node_sz);
+	dbg_gen("node sizes:          data %zu, inode %zu, dentry %zu",
 		UBIFS_DATA_NODE_SZ, UBIFS_INO_NODE_SZ, UBIFS_DENT_NODE_SZ);
-	dbg_msg("node sizes:          trun %zu, sb %zu, master %zu",
+	dbg_gen("node sizes:          trun %zu, sb %zu, master %zu",
 		UBIFS_TRUN_NODE_SZ, UBIFS_SB_NODE_SZ, UBIFS_MST_NODE_SZ);
-	dbg_msg("node sizes:          ref %zu, cmt. start %zu, orph %zu",
+	dbg_gen("node sizes:          ref %zu, cmt. start %zu, orph %zu",
 		UBIFS_REF_NODE_SZ, UBIFS_CS_NODE_SZ, UBIFS_ORPH_NODE_SZ);
-	dbg_msg("max. node sizes:     data %zu, inode %zu dentry %zu",
+	dbg_gen("max. node sizes:     data %zu, inode %zu dentry %zu, idx %d",
 		UBIFS_MAX_DATA_NODE_SZ, UBIFS_MAX_INO_NODE_SZ,
-		UBIFS_MAX_DENT_NODE_SZ);
-	dbg_msg("dead watermark:      %d", c->dead_wm);
-	dbg_msg("dark watermark:      %d", c->dark_wm);
-	dbg_msg("LEB overhead:        %d", c->leb_overhead);
+		UBIFS_MAX_DENT_NODE_SZ, ubifs_idx_node_sz(c, c->fanout));
+	dbg_gen("dead watermark:      %d", c->dead_wm);
+	dbg_gen("dark watermark:      %d", c->dark_wm);
+	dbg_gen("LEB overhead:        %d", c->leb_overhead);
 	x = (long long)c->main_lebs * c->dark_wm;
-	dbg_msg("max. dark space:     %lld (%lld KiB, %lld MiB)",
+	dbg_gen("max. dark space:     %lld (%lld KiB, %lld MiB)",
 		x, x >> 10, x >> 20);
-	dbg_msg("maximum bud bytes:   %lld (%lld KiB, %lld MiB)",
+	dbg_gen("maximum bud bytes:   %lld (%lld KiB, %lld MiB)",
 		c->max_bud_bytes, c->max_bud_bytes >> 10,
 		c->max_bud_bytes >> 20);
-	dbg_msg("BG commit bud bytes: %lld (%lld KiB, %lld MiB)",
+	dbg_gen("BG commit bud bytes: %lld (%lld KiB, %lld MiB)",
 		c->bg_bud_bytes, c->bg_bud_bytes >> 10,
 		c->bg_bud_bytes >> 20);
-	dbg_msg("current bud bytes    %lld (%lld KiB, %lld MiB)",
+	dbg_gen("current bud bytes    %lld (%lld KiB, %lld MiB)",
 		c->bud_bytes, c->bud_bytes >> 10, c->bud_bytes >> 20);
-	dbg_msg("max. seq. number:    %llu", c->max_sqnum);
-	dbg_msg("commit number:       %llu", c->cmt_no);
+	dbg_gen("max. seq. number:    %llu", c->max_sqnum);
+	dbg_gen("commit number:       %llu", c->cmt_no);
+
+	return 0;
+
+out_infos:
+	spin_lock(&ubifs_infos_lock);
+	list_del(&c->infos_list);
+	spin_unlock(&ubifs_infos_lock);
+out_orphans:
+	free_orphans(c);
+#ifndef __UBOOT__
+out_journal:
+	destroy_journal(c);
+#endif
+out_lpt:
+	ubifs_lpt_free(c, 0);
+out_master:
+	kfree(c->mst_node);
+	kfree(c->rcvrd_mst_node);
+	if (c->bgt)
+		kthread_stop(c->bgt);
+#ifndef __UBOOT__
+out_wbufs:
+#endif
+	free_wbufs(c);
+out_cbuf:
+	kfree(c->cbuf);
+out_free:
+	kfree(c->write_reserve_buf);
+	kfree(c->bu.buf);
+	vfree(c->ileb_buf);
+	vfree(c->sbuf);
+	kfree(c->bottom_up_buf);
+	ubifs_debugging_exit(c);
+	return err;
+}
+
+/**
+ * ubifs_umount - un-mount UBIFS file-system.
+ * @c: UBIFS file-system description object
+ *
+ * Note, this function is called to free allocated resourced when un-mounting,
+ * as well as free resources when an error occurred while we were half way
+ * through mounting (error path cleanup function). So it has to make sure the
+ * resource was actually allocated before freeing it.
+ */
+#ifndef __UBOOT__
+static void ubifs_umount(struct ubifs_info *c)
+#else
+void ubifs_umount(struct ubifs_info *c)
+#endif
+{
+	dbg_gen("un-mounting UBI device %d, volume %d", c->vi.ubi_num,
+		c->vi.vol_id);
+
+	dbg_debugfs_exit_fs(c);
+	spin_lock(&ubifs_infos_lock);
+	list_del(&c->infos_list);
+	spin_unlock(&ubifs_infos_lock);
+
+#ifndef __UBOOT__
+	if (c->bgt)
+		kthread_stop(c->bgt);
+
+	destroy_journal(c);
+#endif
+	free_wbufs(c);
+	free_orphans(c);
+	ubifs_lpt_free(c, 0);
+
+	kfree(c->cbuf);
+	kfree(c->rcvrd_mst_node);
+	kfree(c->mst_node);
+	kfree(c->write_reserve_buf);
+	kfree(c->bu.buf);
+	vfree(c->ileb_buf);
+	vfree(c->sbuf);
+	kfree(c->bottom_up_buf);
+	ubifs_debugging_exit(c);
+#ifdef __UBOOT__
+	/* Finally free U-Boot's global copy of superblock */
+	if (ubifs_sb != NULL) {
+		free(ubifs_sb->s_fs_info);
+		free(ubifs_sb);
+	}
+#endif
+}
+
+#ifndef __UBOOT__
+/**
+ * ubifs_remount_rw - re-mount in read-write mode.
+ * @c: UBIFS file-system description object
+ *
+ * UBIFS avoids allocating many unnecessary resources when mounted in read-only
+ * mode. This function allocates the needed resources and re-mounts UBIFS in
+ * read-write mode.
+ */
+static int ubifs_remount_rw(struct ubifs_info *c)
+{
+	int err, lnum;
+
+	if (c->rw_incompat) {
+		ubifs_err("the file-system is not R/W-compatible");
+		ubifs_msg("on-flash format version is w%d/r%d, but software only supports up to version w%d/r%d",
+			  c->fmt_version, c->ro_compat_version,
+			  UBIFS_FORMAT_VERSION, UBIFS_RO_COMPAT_VERSION);
+		return -EROFS;
+	}
+
+	mutex_lock(&c->umount_mutex);
+	dbg_save_space_info(c);
+	c->remounting_rw = 1;
+	c->ro_mount = 0;
+
+	if (c->space_fixup) {
+		err = ubifs_fixup_free_space(c);
+		if (err)
+			return err;
+	}
+
+	err = check_free_space(c);
+	if (err)
+		goto out;
+
+	if (c->old_leb_cnt != c->leb_cnt) {
+		struct ubifs_sb_node *sup;
+
+		sup = ubifs_read_sb_node(c);
+		if (IS_ERR(sup)) {
+			err = PTR_ERR(sup);
+			goto out;
+		}
+		sup->leb_cnt = cpu_to_le32(c->leb_cnt);
+		err = ubifs_write_sb_node(c, sup);
+		kfree(sup);
+		if (err)
+			goto out;
+	}
+
+	if (c->need_recovery) {
+		ubifs_msg("completing deferred recovery");
+		err = ubifs_write_rcvrd_mst_node(c);
+		if (err)
+			goto out;
+		err = ubifs_recover_size(c);
+		if (err)
+			goto out;
+		err = ubifs_clean_lebs(c, c->sbuf);
+		if (err)
+			goto out;
+		err = ubifs_recover_inl_heads(c, c->sbuf);
+		if (err)
+			goto out;
+	} else {
+		/* A readonly mount is not allowed to have orphans */
+		ubifs_assert(c->tot_orphans == 0);
+		err = ubifs_clear_orphans(c);
+		if (err)
+			goto out;
+	}
+
+	if (!(c->mst_node->flags & cpu_to_le32(UBIFS_MST_DIRTY))) {
+		c->mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY);
+		err = ubifs_write_master(c);
+		if (err)
+			goto out;
+	}
+
+	c->ileb_buf = vmalloc(c->leb_size);
+	if (!c->ileb_buf) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	c->write_reserve_buf = kmalloc(COMPRESSED_DATA_NODE_BUF_SZ, GFP_KERNEL);
+	if (!c->write_reserve_buf) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	err = ubifs_lpt_init(c, 0, 1);
+	if (err)
+		goto out;
+
+	/* Create background thread */
+	c->bgt = kthread_create(ubifs_bg_thread, c, "%s", c->bgt_name);
+	if (IS_ERR(c->bgt)) {
+		err = PTR_ERR(c->bgt);
+		c->bgt = NULL;
+		ubifs_err("cannot spawn \"%s\", error %d",
+			  c->bgt_name, err);
+		goto out;
+	}
+	wake_up_process(c->bgt);
+
+	c->orph_buf = vmalloc(c->leb_size);
+	if (!c->orph_buf) {
+		err = -ENOMEM;
+		goto out;
+	}
 
-	return 0;
+	/* Check for enough log space */
+	lnum = c->lhead_lnum + 1;
+	if (lnum >= UBIFS_LOG_LNUM + c->log_lebs)
+		lnum = UBIFS_LOG_LNUM;
+	if (lnum == c->ltail_lnum) {
+		err = ubifs_consolidate_log(c);
+		if (err)
+			goto out;
+	}
 
-out_infos:
-	spin_lock(&ubifs_infos_lock);
-	list_del(&c->infos_list);
-	spin_unlock(&ubifs_infos_lock);
-out_orphans:
-	free_orphans(c);
-out_journal:
-out_lpt:
-	ubifs_lpt_free(c, 0);
-out_master:
-	kfree(c->mst_node);
-	kfree(c->rcvrd_mst_node);
-	if (c->bgt)
+	if (c->need_recovery)
+		err = ubifs_rcvry_gc_commit(c);
+	else
+		err = ubifs_leb_unmap(c, c->gc_lnum);
+	if (err)
+		goto out;
+
+	dbg_gen("re-mounted read-write");
+	c->remounting_rw = 0;
+
+	if (c->need_recovery) {
+		c->need_recovery = 0;
+		ubifs_msg("deferred recovery completed");
+	} else {
+		/*
+		 * Do not run the debugging space check if the were doing
+		 * recovery, because when we saved the information we had the
+		 * file-system in a state where the TNC and lprops has been
+		 * modified in memory, but all the I/O operations (including a
+		 * commit) were deferred. So the file-system was in
+		 * "non-committed" state. Now the file-system is in committed
+		 * state, and of course the amount of free space will change
+		 * because, for example, the old index size was imprecise.
+		 */
+		err = dbg_check_space_info(c);
+	}
+
+	mutex_unlock(&c->umount_mutex);
+	return err;
+
+out:
+	c->ro_mount = 1;
+	vfree(c->orph_buf);
+	c->orph_buf = NULL;
+	if (c->bgt) {
 		kthread_stop(c->bgt);
-	kfree(c->cbuf);
-out_free:
+		c->bgt = NULL;
+	}
+	free_wbufs(c);
+	kfree(c->write_reserve_buf);
+	c->write_reserve_buf = NULL;
 	vfree(c->ileb_buf);
-	vfree(c->sbuf);
-	kfree(c->bottom_up_buf);
-	ubifs_debugging_exit(c);
+	c->ileb_buf = NULL;
+	ubifs_lpt_free(c, 1);
+	c->remounting_rw = 0;
+	mutex_unlock(&c->umount_mutex);
 	return err;
 }
 
 /**
- * ubifs_umount - un-mount UBIFS file-system.
+ * ubifs_remount_ro - re-mount in read-only mode.
  * @c: UBIFS file-system description object
  *
- * Note, this function is called to free allocated resourced when un-mounting,
- * as well as free resources when an error occurred while we were half way
- * through mounting (error path cleanup function). So it has to make sure the
- * resource was actually allocated before freeing it.
+ * We assume VFS has stopped writing. Possibly the background thread could be
+ * running a commit, however kthread_stop will wait in that case.
  */
-void ubifs_umount(struct ubifs_info *c)
+static void ubifs_remount_ro(struct ubifs_info *c)
 {
-	dbg_gen("un-mounting UBI device %d, volume %d", c->vi.ubi_num,
-		c->vi.vol_id);
+	int i, err;
 
-	spin_lock(&ubifs_infos_lock);
-	list_del(&c->infos_list);
-	spin_unlock(&ubifs_infos_lock);
+	ubifs_assert(!c->need_recovery);
+	ubifs_assert(!c->ro_mount);
 
-	if (c->bgt)
+	mutex_lock(&c->umount_mutex);
+	if (c->bgt) {
 		kthread_stop(c->bgt);
+		c->bgt = NULL;
+	}
 
-	free_orphans(c);
-	ubifs_lpt_free(c, 0);
+	dbg_save_space_info(c);
 
-	kfree(c->cbuf);
-	kfree(c->rcvrd_mst_node);
-	kfree(c->mst_node);
+	for (i = 0; i < c->jhead_cnt; i++)
+		ubifs_wbuf_sync(&c->jheads[i].wbuf);
+
+	c->mst_node->flags &= ~cpu_to_le32(UBIFS_MST_DIRTY);
+	c->mst_node->flags |= cpu_to_le32(UBIFS_MST_NO_ORPHS);
+	c->mst_node->gc_lnum = cpu_to_le32(c->gc_lnum);
+	err = ubifs_write_master(c);
+	if (err)
+		ubifs_ro_mode(c, err);
+
+	vfree(c->orph_buf);
+	c->orph_buf = NULL;
+	kfree(c->write_reserve_buf);
+	c->write_reserve_buf = NULL;
 	vfree(c->ileb_buf);
-	vfree(c->sbuf);
-	kfree(c->bottom_up_buf);
-	ubifs_debugging_exit(c);
+	c->ileb_buf = NULL;
+	ubifs_lpt_free(c, 1);
+	c->ro_mount = 1;
+	err = dbg_check_space_info(c);
+	if (err)
+		ubifs_ro_mode(c, err);
+	mutex_unlock(&c->umount_mutex);
+}
 
-	/* Finally free U-Boot's global copy of superblock */
-	if (ubifs_sb != NULL) {
-		free(ubifs_sb->s_fs_info);
-		free(ubifs_sb);
+static void ubifs_put_super(struct super_block *sb)
+{
+	int i;
+	struct ubifs_info *c = sb->s_fs_info;
+
+	ubifs_msg("un-mount UBI device %d, volume %d", c->vi.ubi_num,
+		  c->vi.vol_id);
+
+	/*
+	 * The following asserts are only valid if there has not been a failure
+	 * of the media. For example, there will be dirty inodes if we failed
+	 * to write them back because of I/O errors.
+	 */
+	if (!c->ro_error) {
+		ubifs_assert(c->bi.idx_growth == 0);
+		ubifs_assert(c->bi.dd_growth == 0);
+		ubifs_assert(c->bi.data_growth == 0);
+	}
+
+	/*
+	 * The 'c->umount_lock' prevents races between UBIFS memory shrinker
+	 * and file system un-mount. Namely, it prevents the shrinker from
+	 * picking this superblock for shrinking - it will be just skipped if
+	 * the mutex is locked.
+	 */
+	mutex_lock(&c->umount_mutex);
+	if (!c->ro_mount) {
+		/*
+		 * First of all kill the background thread to make sure it does
+		 * not interfere with un-mounting and freeing resources.
+		 */
+		if (c->bgt) {
+			kthread_stop(c->bgt);
+			c->bgt = NULL;
+		}
+
+		/*
+		 * On fatal errors c->ro_error is set to 1, in which case we do
+		 * not write the master node.
+		 */
+		if (!c->ro_error) {
+			int err;
+
+			/* Synchronize write-buffers */
+			for (i = 0; i < c->jhead_cnt; i++)
+				ubifs_wbuf_sync(&c->jheads[i].wbuf);
+
+			/*
+			 * We are being cleanly unmounted which means the
+			 * orphans were killed - indicate this in the master
+			 * node. Also save the reserved GC LEB number.
+			 */
+			c->mst_node->flags &= ~cpu_to_le32(UBIFS_MST_DIRTY);
+			c->mst_node->flags |= cpu_to_le32(UBIFS_MST_NO_ORPHS);
+			c->mst_node->gc_lnum = cpu_to_le32(c->gc_lnum);
+			err = ubifs_write_master(c);
+			if (err)
+				/*
+				 * Recovery will attempt to fix the master area
+				 * next mount, so we just print a message and
+				 * continue to unmount normally.
+				 */
+				ubifs_err("failed to write master node, error %d",
+					  err);
+		} else {
+#ifndef __UBOOT__
+			for (i = 0; i < c->jhead_cnt; i++)
+				/* Make sure write-buffer timers are canceled */
+				hrtimer_cancel(&c->jheads[i].wbuf.timer);
+#endif
+		}
+	}
+
+	ubifs_umount(c);
+#ifndef __UBOOT__
+	bdi_destroy(&c->bdi);
+#endif
+	ubi_close_volume(c->ubi);
+	mutex_unlock(&c->umount_mutex);
+}
+#endif
+
+#ifndef __UBOOT__
+static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data)
+{
+	int err;
+	struct ubifs_info *c = sb->s_fs_info;
+
+	dbg_gen("old flags %#lx, new flags %#x", sb->s_flags, *flags);
+
+	err = ubifs_parse_options(c, data, 1);
+	if (err) {
+		ubifs_err("invalid or unknown remount parameter");
+		return err;
+	}
+
+	if (c->ro_mount && !(*flags & MS_RDONLY)) {
+		if (c->ro_error) {
+			ubifs_msg("cannot re-mount R/W due to prior errors");
+			return -EROFS;
+		}
+		if (c->ro_media) {
+			ubifs_msg("cannot re-mount R/W - UBI volume is R/O");
+			return -EROFS;
+		}
+		err = ubifs_remount_rw(c);
+		if (err)
+			return err;
+	} else if (!c->ro_mount && (*flags & MS_RDONLY)) {
+		if (c->ro_error) {
+			ubifs_msg("cannot re-mount R/O due to prior errors");
+			return -EROFS;
+		}
+		ubifs_remount_ro(c);
+	}
+
+	if (c->bulk_read == 1)
+		bu_init(c);
+	else {
+		dbg_gen("disable bulk-read");
+		kfree(c->bu.buf);
+		c->bu.buf = NULL;
 	}
+
+	ubifs_assert(c->lst.taken_empty_lebs > 0);
+	return 0;
 }
+#endif
+
+const struct super_operations ubifs_super_operations = {
+	.alloc_inode   = ubifs_alloc_inode,
+#ifndef __UBOOT__
+	.destroy_inode = ubifs_destroy_inode,
+	.put_super     = ubifs_put_super,
+	.write_inode   = ubifs_write_inode,
+	.evict_inode   = ubifs_evict_inode,
+	.statfs        = ubifs_statfs,
+#endif
+	.dirty_inode   = ubifs_dirty_inode,
+#ifndef __UBOOT__
+	.remount_fs    = ubifs_remount_fs,
+	.show_options  = ubifs_show_options,
+	.sync_fs       = ubifs_sync_fs,
+#endif
+};
 
 /**
  * open_ubi - parse UBI device name string and open the UBI device.
  * @name: UBI volume name
  * @mode: UBI volume open mode
  *
- * There are several ways to specify UBI volumes when mounting UBIFS:
- * o ubiX_Y    - UBI device number X, volume Y;
- * o ubiY      - UBI device number 0, volume Y;
+ * The primary method of mounting UBIFS is by specifying the UBI volume
+ * character device node path. However, UBIFS may also be mounted withoug any
+ * character device node using one of the following methods:
+ *
+ * o ubiX_Y    - mount UBI device number X, volume Y;
+ * o ubiY      - mount UBI device number 0, volume Y;
  * o ubiX:NAME - mount UBI device X, volume with name NAME;
  * o ubi:NAME  - mount UBI device 0, volume with name NAME.
  *
  * Alternative '!' separator may be used instead of ':' (because some shells
  * like busybox may interpret ':' as an NFS host name separator). This function
- * returns ubi volume object in case of success and a negative error code in
- * case of failure.
+ * returns UBI volume description object in case of success and a negative
+ * error code in case of failure.
  */
 static struct ubi_volume_desc *open_ubi(const char *name, int mode)
 {
+#ifndef __UBOOT__
+	struct ubi_volume_desc *ubi;
+#endif
 	int dev, vol;
 	char *endptr;
 
+#ifndef __UBOOT__
+	/* First, try to open using the device node path method */
+	ubi = ubi_open_volume_path(name, mode);
+	if (!IS_ERR(ubi))
+		return ubi;
+#endif
+
+	/* Try the "nodev" method */
 	if (name[0] != 'u' || name[1] != 'b' || name[2] != 'i')
 		return ERR_PTR(-EINVAL);
 
@@ -905,78 +2187,100 @@ static struct ubi_volume_desc *open_ubi(const char *name, int mode)
 	return ERR_PTR(-EINVAL);
 }
 
-static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
+static struct ubifs_info *alloc_ubifs_info(struct ubi_volume_desc *ubi)
 {
-	struct ubi_volume_desc *ubi = sb->s_fs_info;
 	struct ubifs_info *c;
-	struct inode *root;
-	int err;
 
 	c = kzalloc(sizeof(struct ubifs_info), GFP_KERNEL);
-	if (!c)
-		return -ENOMEM;
+	if (c) {
+		spin_lock_init(&c->cnt_lock);
+		spin_lock_init(&c->cs_lock);
+		spin_lock_init(&c->buds_lock);
+		spin_lock_init(&c->space_lock);
+		spin_lock_init(&c->orphan_lock);
+		init_rwsem(&c->commit_sem);
+		mutex_init(&c->lp_mutex);
+		mutex_init(&c->tnc_mutex);
+		mutex_init(&c->log_mutex);
+		mutex_init(&c->mst_mutex);
+		mutex_init(&c->umount_mutex);
+		mutex_init(&c->bu_mutex);
+		mutex_init(&c->write_reserve_mutex);
+		init_waitqueue_head(&c->cmt_wq);
+		c->buds = RB_ROOT;
+		c->old_idx = RB_ROOT;
+		c->size_tree = RB_ROOT;
+		c->orph_tree = RB_ROOT;
+		INIT_LIST_HEAD(&c->infos_list);
+		INIT_LIST_HEAD(&c->idx_gc);
+		INIT_LIST_HEAD(&c->replay_list);
+		INIT_LIST_HEAD(&c->replay_buds);
+		INIT_LIST_HEAD(&c->uncat_list);
+		INIT_LIST_HEAD(&c->empty_list);
+		INIT_LIST_HEAD(&c->freeable_list);
+		INIT_LIST_HEAD(&c->frdi_idx_list);
+		INIT_LIST_HEAD(&c->unclean_leb_list);
+		INIT_LIST_HEAD(&c->old_buds);
+		INIT_LIST_HEAD(&c->orph_list);
+		INIT_LIST_HEAD(&c->orph_new);
+		c->no_chk_data_crc = 1;
+
+		c->highest_inum = UBIFS_FIRST_INO;
+		c->lhead_lnum = c->ltail_lnum = UBIFS_LOG_LNUM;
+
+		ubi_get_volume_info(ubi, &c->vi);
+		ubi_get_device_info(c->vi.ubi_num, &c->di);
+	}
+	return c;
+}
 
-	spin_lock_init(&c->cnt_lock);
-	spin_lock_init(&c->cs_lock);
-	spin_lock_init(&c->buds_lock);
-	spin_lock_init(&c->space_lock);
-	spin_lock_init(&c->orphan_lock);
-	init_rwsem(&c->commit_sem);
-	mutex_init(&c->lp_mutex);
-	mutex_init(&c->tnc_mutex);
-	mutex_init(&c->log_mutex);
-	mutex_init(&c->mst_mutex);
-	mutex_init(&c->umount_mutex);
-	init_waitqueue_head(&c->cmt_wq);
-	c->buds = RB_ROOT;
-	c->old_idx = RB_ROOT;
-	c->size_tree = RB_ROOT;
-	c->orph_tree = RB_ROOT;
-	INIT_LIST_HEAD(&c->infos_list);
-	INIT_LIST_HEAD(&c->idx_gc);
-	INIT_LIST_HEAD(&c->replay_list);
-	INIT_LIST_HEAD(&c->replay_buds);
-	INIT_LIST_HEAD(&c->uncat_list);
-	INIT_LIST_HEAD(&c->empty_list);
-	INIT_LIST_HEAD(&c->freeable_list);
-	INIT_LIST_HEAD(&c->frdi_idx_list);
-	INIT_LIST_HEAD(&c->unclean_leb_list);
-	INIT_LIST_HEAD(&c->old_buds);
-	INIT_LIST_HEAD(&c->orph_list);
-	INIT_LIST_HEAD(&c->orph_new);
-
-	c->highest_inum = UBIFS_FIRST_INO;
-	c->lhead_lnum = c->ltail_lnum = UBIFS_LOG_LNUM;
-
-	ubi_get_volume_info(ubi, &c->vi);
-	ubi_get_device_info(c->vi.ubi_num, &c->di);
+static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
+{
+	struct ubifs_info *c = sb->s_fs_info;
+	struct inode *root;
+	int err;
 
+	c->vfs_sb = sb;
 	/* Re-open the UBI device in read-write mode */
-	c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READONLY);
+	c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READWRITE);
 	if (IS_ERR(c->ubi)) {
 		err = PTR_ERR(c->ubi);
-		goto out_free;
+		goto out;
 	}
 
-	c->vfs_sb = sb;
+#ifndef __UBOOT__
+	/*
+	 * UBIFS provides 'backing_dev_info' in order to disable read-ahead. For
+	 * UBIFS, I/O is not deferred, it is done immediately in readpage,
+	 * which means the user would have to wait not just for their own I/O
+	 * but the read-ahead I/O as well i.e. completely pointless.
+	 *
+	 * Read-ahead will be disabled because @c->bdi.ra_pages is 0.
+	 */
+	co>bdi.name = "ubifs",
+	c->bdi.capabilities = BDI_CAP_MAP_COPY;
+	err  = bdi_init(&c->bdi);
+	if (err)
+		goto out_close;
+	err = bdi_register(&c->bdi, NULL, "ubifs_%d_%d",
+			   c->vi.ubi_num, c->vi.vol_id);
+	if (err)
+		goto out_bdi;
 
+	err = ubifs_parse_options(c, data, 0);
+	if (err)
+		goto out_bdi;
+
+	sb->s_bdi = &c->bdi;
+#endif
 	sb->s_fs_info = c;
 	sb->s_magic = UBIFS_SUPER_MAGIC;
 	sb->s_blocksize = UBIFS_BLOCK_SIZE;
 	sb->s_blocksize_bits = UBIFS_BLOCK_SHIFT;
-	sb->s_dev = c->vi.cdev;
 	sb->s_maxbytes = c->max_inode_sz = key_max_inode_size(c);
 	if (c->max_inode_sz > MAX_LFS_FILESIZE)
 		sb->s_maxbytes = c->max_inode_sz = MAX_LFS_FILESIZE;
-
-	if (c->rw_incompat) {
-		ubifs_err("the file-system is not R/W-compatible");
-		ubifs_msg("on-flash format version is w%d/r%d, but software "
-			  "only supports up to version w%d/r%d", c->fmt_version,
-			  c->ro_compat_version, UBIFS_FORMAT_VERSION,
-			  UBIFS_RO_COMPAT_VERSION);
-		return -EROFS;
-	}
+	sb->s_op = &ubifs_super_operations;
 
 	mutex_lock(&c->umount_mutex);
 	err = mount_ubifs(c);
@@ -992,7 +2296,15 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
 		goto out_umount;
 	}
 
+#ifndef __UBOOT__
+	sb->s_root = d_make_root(root);
+	if (!sb->s_root) {
+		err = -ENOMEM;
+		goto out_umount;
+	}
+#else
 	sb->s_root = NULL;
+#endif
 
 	mutex_unlock(&c->umount_mutex);
 	return 0;
@@ -1001,24 +2313,130 @@ out_umount:
 	ubifs_umount(c);
 out_unlock:
 	mutex_unlock(&c->umount_mutex);
+#ifndef __UBOOT__
+out_bdi:
+	bdi_destroy(&c->bdi);
+out_close:
+#endif
 	ubi_close_volume(c->ubi);
-out_free:
-	kfree(c);
+out:
 	return err;
 }
 
 static int sb_test(struct super_block *sb, void *data)
 {
-	dev_t *dev = data;
+	struct ubifs_info *c1 = data;
+	struct ubifs_info *c = sb->s_fs_info;
+
+	return c->vi.cdev == c1->vi.cdev;
+}
+
+static int sb_set(struct super_block *sb, void *data)
+{
+	sb->s_fs_info = data;
+	return set_anon_super(sb, NULL);
+}
+
+static struct super_block *alloc_super(struct file_system_type *type, int flags)
+{
+	struct super_block *s;
+	int err;
+
+	s = kzalloc(sizeof(struct super_block),  GFP_USER);
+	if (!s) {
+		err = -ENOMEM;
+		return ERR_PTR(err);
+	}
+
+	INIT_HLIST_NODE(&s->s_instances);
+	INIT_LIST_HEAD(&s->s_inodes);
+	s->s_time_gran = 1000000000;
+	s->s_flags = flags;
+
+	return s;
+}
+
+/**
+ *	sget	-	find or create a superblock
+ *	@type:	filesystem type superblock should belong to
+ *	@test:	comparison callback
+ *	@set:	setup callback
+ *	@flags:	mount flags
+ *	@data:	argument to each of them
+ */
+struct super_block *sget(struct file_system_type *type,
+			int (*test)(struct super_block *,void *),
+			int (*set)(struct super_block *,void *),
+			int flags,
+			void *data)
+{
+	struct super_block *s = NULL;
+#ifndef __UBOOT__
+	struct super_block *old;
+#endif
+	int err;
 
-	return sb->s_dev == *dev;
+#ifndef __UBOOT__
+retry:
+	spin_lock(&sb_lock);
+	if (test) {
+		hlist_for_each_entry(old, &type->fs_supers, s_instances) {
+			if (!test(old, data))
+				continue;
+			if (!grab_super(old))
+				goto retry;
+			if (s) {
+				up_write(&s->s_umount);
+				destroy_super(s);
+				s = NULL;
+			}
+			return old;
+		}
+	}
+#endif
+	if (!s) {
+		spin_unlock(&sb_lock);
+		s = alloc_super(type, flags);
+		if (!s)
+			return ERR_PTR(-ENOMEM);
+#ifndef __UBOOT__
+		goto retry;
+#endif
+	}
+		
+	err = set(s, data);
+	if (err) {
+#ifndef __UBOOT__
+		spin_unlock(&sb_lock);
+		up_write(&s->s_umount);
+		destroy_super(s);
+#endif
+		return ERR_PTR(err);
+	}
+	s->s_type = type;
+#ifndef __UBOOT__
+	strlcpy(s->s_id, type->name, sizeof(s->s_id));
+#else
+	strncpy(s->s_id, type->name, sizeof(s->s_id));
+#endif
+	list_add_tail(&s->s_list, &super_blocks);
+	hlist_add_head(&s->s_instances, &type->fs_supers);
+#ifndef __UBOOT__
+	spin_unlock(&sb_lock);
+	get_filesystem(type);
+	register_shrinker(&s->s_shrink);
+#endif
+	return s;
 }
 
-static int ubifs_get_sb(struct file_system_type *fs_type, int flags,
-			const char *name, void *data, struct vfsmount *mnt)
+EXPORT_SYMBOL(sget);
+
+
+static struct dentry *ubifs_mount(struct file_system_type *fs_type, int flags,
+			const char *name, void *data)
 {
 	struct ubi_volume_desc *ubi;
-	struct ubi_volume_info vi;
+	struct ubifs_info *c;
 	struct super_block *sb;
 	int err;
 
@@ -1033,32 +2451,34 @@ static int ubifs_get_sb(struct file_system_type *fs_type, int flags,
 	if (IS_ERR(ubi)) {
 		ubifs_err("cannot open \"%s\", error %d",
 			  name, (int)PTR_ERR(ubi));
-		return PTR_ERR(ubi);
+		return ERR_CAST(ubi);
+	}
+
+	c = alloc_ubifs_info(ubi);
+	if (!c) {
+		err = -ENOMEM;
+		goto out_close;
 	}
-	ubi_get_volume_info(ubi, &vi);
 
-	dbg_gen("opened ubi%d_%d", vi.ubi_num, vi.vol_id);
+	dbg_gen("opened ubi%d_%d", c->vi.ubi_num, c->vi.vol_id);
 
-	sb = sget(fs_type, &sb_test, &sb_set, &vi.cdev);
+	sb = sget(fs_type, sb_test, sb_set, flags, c);
 	if (IS_ERR(sb)) {
 		err = PTR_ERR(sb);
+		kfree(c);
 		goto out_close;
 	}
 
 	if (sb->s_root) {
+		struct ubifs_info *c1 = sb->s_fs_info;
+		kfree(c);
 		/* A new mount point for already mounted UBIFS */
 		dbg_gen("this ubi volume is already mounted");
-		if ((flags ^ sb->s_flags) & MS_RDONLY) {
+		if (!!(flags & MS_RDONLY) != c1->ro_mount) {
 			err = -EBUSY;
 			goto out_deact;
 		}
 	} else {
-		sb->s_flags = flags;
-		/*
-		 * Pass 'ubi' to 'fill_super()' in sb->s_fs_info where it is
-		 * replaced by 'c'.
-		 */
-		sb->s_fs_info = ubi;
 		err = ubifs_fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
 		if (err)
 			goto out_deact;
@@ -1069,17 +2489,53 @@ static int ubifs_get_sb(struct file_system_type *fs_type, int flags,
 	/* 'fill_super()' opens ubi again so we must close it here */
 	ubi_close_volume(ubi);
 
+#ifdef __UBOOT__
 	ubifs_sb = sb;
 	return 0;
+#else
+	return dget(sb->s_root);
+#endif
 
 out_deact:
-	up_write(&sb->s_umount);
+#ifndef __UBOOT__
+	deactivate_locked_super(sb);
+#endif
 out_close:
 	ubi_close_volume(ubi);
-	return err;
+	return ERR_PTR(err);
+}
+
+static void kill_ubifs_super(struct super_block *s)
+{
+	struct ubifs_info *c = s->s_fs_info;
+#ifndef __UBOOT__
+	kill_anon_super(s);
+#endif
+	kfree(c);
+}
+
+static struct file_system_type ubifs_fs_type = {
+	.name    = "ubifs",
+	.owner   = THIS_MODULE,
+	.mount   = ubifs_mount,
+	.kill_sb = kill_ubifs_super,
+};
+#ifndef __UBOOT__
+MODULE_ALIAS_FS("ubifs");
+
+/*
+ * Inode slab cache constructor.
+ */
+static void inode_slab_ctor(void *obj)
+{
+	struct ubifs_inode *ui = obj;
+	inode_init_once(&ui->vfs_inode);
 }
 
-int __init ubifs_init(void)
+static int __init ubifs_init(void)
+#else
+int ubifs_init(void)
+#endif
 {
 	int err;
 
@@ -1135,41 +2591,84 @@ int __init ubifs_init(void)
 	 * UBIFS_BLOCK_SIZE. It is assumed that both are powers of 2.
 	 */
 	if (PAGE_CACHE_SIZE < UBIFS_BLOCK_SIZE) {
-		ubifs_err("VFS page cache size is %u bytes, but UBIFS requires"
-			  " at least 4096 bytes",
+		ubifs_err("VFS page cache size is %u bytes, but UBIFS requires at least 4096 bytes",
 			  (unsigned int)PAGE_CACHE_SIZE);
 		return -EINVAL;
 	}
 
-	err = -ENOMEM;
+#ifndef __UBOOT__
+	ubifs_inode_slab = kmem_cache_create("ubifs_inode_slab",
+				sizeof(struct ubifs_inode), 0,
+				SLAB_MEM_SPREAD | SLAB_RECLAIM_ACCOUNT,
+				&inode_slab_ctor);
+	if (!ubifs_inode_slab)
+		return -ENOMEM;
+
+	register_shrinker(&ubifs_shrinker_info);
+#endif
 
 	err = ubifs_compressors_init();
 	if (err)
 		goto out_shrinker;
 
+#ifndef __UBOOT__
+	err = dbg_debugfs_init();
+	if (err)
+		goto out_compr;
+
+	err = register_filesystem(&ubifs_fs_type);
+	if (err) {
+		ubifs_err("cannot register file system, error %d", err);
+		goto out_dbg;
+	}
+#endif
 	return 0;
 
+#ifndef __UBOOT__
+out_dbg:
+	dbg_debugfs_exit();
+out_compr:
+	ubifs_compressors_exit();
+#endif
 out_shrinker:
+#ifndef __UBOOT__
+	unregister_shrinker(&ubifs_shrinker_info);
+#endif
+	kmem_cache_destroy(ubifs_inode_slab);
 	return err;
 }
+/* late_initcall to let compressors initialize first */
+late_initcall(ubifs_init);
 
-/*
- * ubifsmount...
- */
+#ifndef __UBOOT__
+static void __exit ubifs_exit(void)
+{
+	ubifs_assert(list_empty(&ubifs_infos));
+	ubifs_assert(atomic_long_read(&ubifs_clean_zn_cnt) == 0);
 
-static struct file_system_type ubifs_fs_type = {
-	.name    = "ubifs",
-	.owner   = THIS_MODULE,
-	.get_sb  = ubifs_get_sb,
-};
+	dbg_debugfs_exit();
+	ubifs_compressors_exit();
+	unregister_shrinker(&ubifs_shrinker_info);
 
-int ubifs_mount(char *name)
+	/*
+	 * Make sure all delayed rcu free inodes are flushed before we
+	 * destroy cache.
+	 */
+	rcu_barrier();
+	kmem_cache_destroy(ubifs_inode_slab);
+	unregister_filesystem(&ubifs_fs_type);
+}
+module_exit(ubifs_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_VERSION(__stringify(UBIFS_VERSION));
+MODULE_AUTHOR("Artem Bityutskiy, Adrian Hunter");
+MODULE_DESCRIPTION("UBIFS - UBI File System");
+#else
+int uboot_ubifs_mount(char *vol_name)
 {
+	struct dentry *ret;
 	int flags;
-	void *data;
-	struct vfsmount *mnt;
-	int ret;
-	struct ubifs_info *c;
 
 	/*
 	 * First unmount if allready mounted
@@ -1177,23 +2676,17 @@ int ubifs_mount(char *name)
 	if (ubifs_sb)
 		ubifs_umount(ubifs_sb->s_fs_info);
 
-	INIT_LIST_HEAD(&ubifs_infos);
-	INIT_LIST_HEAD(&ubifs_fs_type.fs_supers);
-
 	/*
 	 * Mount in read-only mode
 	 */
 	flags = MS_RDONLY;
-	data = NULL;
-	mnt = NULL;
-	ret = ubifs_get_sb(&ubifs_fs_type, flags, name, data, mnt);
-	if (ret) {
-		ubifs_err("Error reading superblock on volume '%s' errno=%d!\n", name, ret);
+	ret = ubifs_mount(&ubifs_fs_type, flags, vol_name, NULL);
+	if (IS_ERR(ret)) {
+		printf("Error reading superblock on volume '%s' " \
+			"errno=%d!\n", vol_name, (int)PTR_ERR(ret));
 		return -1;
 	}
 
-	c = ubifs_sb->s_fs_info;
-	ubi_close_volume(c->ubi);
-
 	return 0;
 }
+#endif
diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c
index ccda938..eda5070 100644
--- a/fs/ubifs/tnc.c
+++ b/fs/ubifs/tnc.c
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Adrian Hunter
  *          Artem Bityutskiy (Битюцкий Артём)
@@ -30,6 +19,15 @@
  * the mutex locked.
  */
 
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/crc32.h>
+#include <linux/slab.h>
+#else
+#include <linux/compat.h>
+#include <linux/err.h>
+#include <linux/stat.h>
+#endif
 #include "ubifs.h"
 
 /*
@@ -176,27 +174,11 @@ static int ins_clr_old_idx_znode(struct ubifs_info *c,
  */
 void destroy_old_idx(struct ubifs_info *c)
 {
-	struct rb_node *this = c->old_idx.rb_node;
-	struct ubifs_old_idx *old_idx;
+	struct ubifs_old_idx *old_idx, *n;
 
-	while (this) {
-		if (this->rb_left) {
-			this = this->rb_left;
-			continue;
-		} else if (this->rb_right) {
-			this = this->rb_right;
-			continue;
-		}
-		old_idx = rb_entry(this, struct ubifs_old_idx, rb);
-		this = rb_parent(this);
-		if (this) {
-			if (this->rb_left == &old_idx->rb)
-				this->rb_left = NULL;
-			else
-				this->rb_right = NULL;
-		}
+	rbtree_postorder_for_each_entry_safe(old_idx, n, &c->old_idx, rb)
 		kfree(old_idx);
-	}
+
 	c->old_idx = RB_ROOT;
 }
 
@@ -221,7 +203,7 @@ static struct ubifs_znode *copy_znode(struct ubifs_info *c,
 	__set_bit(DIRTY_ZNODE, &zn->flags);
 	__clear_bit(COW_ZNODE, &zn->flags);
 
-	ubifs_assert(!test_bit(OBSOLETE_ZNODE, &znode->flags));
+	ubifs_assert(!ubifs_zn_obsolete(znode));
 	__set_bit(OBSOLETE_ZNODE, &znode->flags);
 
 	if (znode->level != 0) {
@@ -269,7 +251,7 @@ static struct ubifs_znode *dirty_cow_znode(struct ubifs_info *c,
 	struct ubifs_znode *zn;
 	int err;
 
-	if (!test_bit(COW_ZNODE, &znode->flags)) {
+	if (!ubifs_zn_cow(znode)) {
 		/* znode is not being committed */
 		if (!test_and_set_bit(DIRTY_ZNODE, &znode->flags)) {
 			atomic_long_inc(&c->dirty_zn_cnt);
@@ -337,17 +319,16 @@ static int lnc_add(struct ubifs_info *c, struct ubifs_zbranch *zbr,
 
 	err = ubifs_validate_entry(c, dent);
 	if (err) {
-		dbg_dump_stack();
-		dbg_dump_node(c, dent);
+		dump_stack();
+		ubifs_dump_node(c, dent);
 		return err;
 	}
 
-	lnc_node = kmalloc(zbr->len, GFP_NOFS);
+	lnc_node = kmemdup(node, zbr->len, GFP_NOFS);
 	if (!lnc_node)
 		/* We don't have to have the cache, so no error */
 		return 0;
 
-	memcpy(lnc_node, node, zbr->len);
 	zbr->leaf = lnc_node;
 	return 0;
 }
@@ -371,8 +352,8 @@ static int lnc_add_directly(struct ubifs_info *c, struct ubifs_zbranch *zbr,
 
 	err = ubifs_validate_entry(c, node);
 	if (err) {
-		dbg_dump_stack();
-		dbg_dump_node(c, node);
+		dump_stack();
+		ubifs_dump_node(c, node);
 		return err;
 	}
 
@@ -445,8 +426,11 @@ static int tnc_read_node_nm(struct ubifs_info *c, struct ubifs_zbranch *zbr,
  *
  * Note, this function does not check CRC of data nodes if @c->no_chk_data_crc
  * is true (it is controlled by corresponding mount option). However, if
- * @c->always_chk_crc is true, @c->no_chk_data_crc is ignored and CRC is always
- * checked.
+ * @c->mounting or @c->remounting_rw is true (we are mounting or re-mounting to
+ * R/W mode), @c->no_chk_data_crc is ignored and CRC is checked. This is
+ * because during mounting or re-mounting from R/O mode to R/W mode we may read
+ * journal nodes (when replying the journal or doing the recovery) and the
+ * journal nodes may potentially be corrupted, so checking is required.
  */
 static int try_read_node(const struct ubifs_info *c, void *buf, int type,
 			 int len, int lnum, int offs)
@@ -457,7 +441,7 @@ static int try_read_node(const struct ubifs_info *c, void *buf, int type,
 
 	dbg_io("LEB %d:%d, %s, length %d", lnum, offs, dbg_ntype(type), len);
 
-	err = ubi_read(c->ubi, lnum, buf, offs, len);
+	err = ubifs_leb_read(c, lnum, buf, offs, len, 1);
 	if (err) {
 		ubifs_err("cannot read node type %d from LEB %d:%d, error %d",
 			  type, lnum, offs, err);
@@ -474,7 +458,8 @@ static int try_read_node(const struct ubifs_info *c, void *buf, int type,
 	if (node_len != len)
 		return 0;
 
-	if (type == UBIFS_DATA_NODE && !c->always_chk_crc && c->no_chk_data_crc)
+	if (type == UBIFS_DATA_NODE && c->no_chk_data_crc && !c->mounting &&
+	    !c->remounting_rw)
 		return 1;
 
 	crc = crc32(UBIFS_CRC32_INIT, buf + 8, node_len - 8);
@@ -500,7 +485,7 @@ static int fallible_read_node(struct ubifs_info *c, const union ubifs_key *key,
 {
 	int ret;
 
-	dbg_tnc("LEB %d:%d, key %s", zbr->lnum, zbr->offs, DBGKEY(key));
+	dbg_tnck(key, "LEB %d:%d, key ", zbr->lnum, zbr->offs);
 
 	ret = try_read_node(c, node, key_type(c, key), zbr->len, zbr->lnum,
 			    zbr->offs);
@@ -514,8 +499,8 @@ static int fallible_read_node(struct ubifs_info *c, const union ubifs_key *key,
 			ret = 0;
 	}
 	if (ret == 0 && c->replaying)
-		dbg_mnt("dangling branch LEB %d:%d len %d, key %s",
-			zbr->lnum, zbr->offs, zbr->len, DBGKEY(key));
+		dbg_mntk(key, "dangling branch LEB %d:%d len %d, key ",
+			zbr->lnum, zbr->offs, zbr->len);
 	return ret;
 }
 
@@ -990,9 +975,9 @@ static int fallible_resolve_collision(struct ubifs_info *c,
 	if (adding || !o_znode)
 		return 0;
 
-	dbg_mnt("dangling match LEB %d:%d len %d %s",
+	dbg_mntk(key, "dangling match LEB %d:%d len %d key ",
 		o_znode->zbranch[o_n].lnum, o_znode->zbranch[o_n].offs,
-		o_znode->zbranch[o_n].len, DBGKEY(key));
+		o_znode->zbranch[o_n].len);
 	*zn = o_znode;
 	*n = o_n;
 	return 1;
@@ -1158,8 +1143,8 @@ static struct ubifs_znode *dirty_cow_bottom_up(struct ubifs_info *c,
  *   o exact match, i.e. the found zero-level znode contains key @key, then %1
  *     is returned and slot number of the matched branch is stored in @n;
  *   o not exact match, which means that zero-level znode does not contain
- *     @key, then %0 is returned and slot number of the closed branch is stored
- *     in  @n;
+ *     @key, then %0 is returned and slot number of the closest branch is stored
+ *     in @n;
  *   o @key is so small that it is even less than the lowest key of the
  *     leftmost zero-level node, then %0 is returned and %0 is stored in @n.
  *
@@ -1174,7 +1159,8 @@ int ubifs_lookup_level0(struct ubifs_info *c, const union ubifs_key *key,
 	struct ubifs_znode *znode;
 	unsigned long time = get_seconds();
 
-	dbg_tnc("search key %s", DBGKEY(key));
+	dbg_tnck(key, "search key ");
+	ubifs_assert(key_type(c, key) < UBIFS_INVALID_KEY);
 
 	znode = c->zroot.znode;
 	if (unlikely(!znode)) {
@@ -1251,7 +1237,7 @@ int ubifs_lookup_level0(struct ubifs_info *c, const union ubifs_key *key,
 	 * splitting in the middle of the colliding sequence. Also, when
 	 * removing the leftmost key, we would have to correct the key of the
 	 * parent node, which would introduce additional complications. Namely,
-	 * if we changed the the leftmost key of the parent znode, the garbage
+	 * if we changed the leftmost key of the parent znode, the garbage
 	 * collector would be unable to find it (GC is doing this when GC'ing
 	 * indexing LEBs). Although we already have an additional RB-tree where
 	 * we save such changed znodes (see 'ins_clr_old_idx_znode()') until
@@ -1309,7 +1295,7 @@ static int lookup_level0_dirty(struct ubifs_info *c, const union ubifs_key *key,
 	struct ubifs_znode *znode;
 	unsigned long time = get_seconds();
 
-	dbg_tnc("search and dirty key %s", DBGKEY(key));
+	dbg_tnck(key, "search and dirty key ");
 
 	znode = c->zroot.znode;
 	if (unlikely(!znode)) {
@@ -1400,9 +1386,31 @@ static int lookup_level0_dirty(struct ubifs_info *c, const union ubifs_key *key,
  */
 static int maybe_leb_gced(struct ubifs_info *c, int lnum, int gc_seq1)
 {
+#ifndef __UBOOT__
+	int gc_seq2, gced_lnum;
+
+	gced_lnum = c->gced_lnum;
+	smp_rmb();
+	gc_seq2 = c->gc_seq;
+	/* Same seq means no GC */
+	if (gc_seq1 == gc_seq2)
+		return 0;
+	/* Different by more than 1 means we don't know */
+	if (gc_seq1 + 1 != gc_seq2)
+		return 1;
 	/*
-	 * No garbage collection in the read-only U-Boot implementation
+	 * We have seen the sequence number has increased by 1. Now we need to
+	 * be sure we read the right LEB number, so read it again.
 	 */
+	smp_rmb();
+	if (gced_lnum != c->gced_lnum)
+		return 1;
+	/* Finally we can check lnum */
+	if (gced_lnum == lnum)
+		return 1;
+#else
+	/* No garbage collection in the read-only U-Boot implementation */
+#endif
 	return 0;
 }
 
@@ -1414,7 +1422,7 @@ static int maybe_leb_gced(struct ubifs_info *c, int lnum, int gc_seq1)
  * @lnum: LEB number is returned here
  * @offs: offset is returned here
  *
- * This function look up and reads node with key @key. The caller has to make
+ * This function looks up and reads node with key @key. The caller has to make
  * sure the @node buffer is large enough to fit the node. Returns zero in case
  * of success, %-ENOENT if the node was not found, and a negative error code in
  * case of failure. The node location can be returned in @lnum and @offs.
@@ -1458,6 +1466,12 @@ again:
 	gc_seq1 = c->gc_seq;
 	mutex_unlock(&c->tnc_mutex);
 
+	if (ubifs_get_wbuf(c, zbr.lnum)) {
+		/* We do not GC journal heads */
+		err = ubifs_tnc_read_node(c, &zbr, node);
+		return err;
+	}
+
 	err = fallible_read_node(c, key, &zbr, node);
 	if (err <= 0 || maybe_leb_gced(c, zbr.lnum, gc_seq1)) {
 		/*
@@ -1610,6 +1624,51 @@ out:
 }
 
 /**
+ * read_wbuf - bulk-read from a LEB with a wbuf.
+ * @wbuf: wbuf that may overlap the read
+ * @buf: buffer into which to read
+ * @len: read length
+ * @lnum: LEB number from which to read
+ * @offs: offset from which to read
+ *
+ * This functions returns %0 on success or a negative error code on failure.
+ */
+static int read_wbuf(struct ubifs_wbuf *wbuf, void *buf, int len, int lnum,
+		     int offs)
+{
+	const struct ubifs_info *c = wbuf->c;
+	int rlen, overlap;
+
+	dbg_io("LEB %d:%d, length %d", lnum, offs, len);
+	ubifs_assert(wbuf && lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
+	ubifs_assert(!(offs & 7) && offs < c->leb_size);
+	ubifs_assert(offs + len <= c->leb_size);
+
+	spin_lock(&wbuf->lock);
+	overlap = (lnum == wbuf->lnum && offs + len > wbuf->offs);
+	if (!overlap) {
+		/* We may safely unlock the write-buffer and read the data */
+		spin_unlock(&wbuf->lock);
+		return ubifs_leb_read(c, lnum, buf, offs, len, 0);
+	}
+
+	/* Don't read under wbuf */
+	rlen = wbuf->offs - offs;
+	if (rlen < 0)
+		rlen = 0;
+
+	/* Copy the rest from the write-buffer */
+	memcpy(buf + rlen, wbuf->buf + offs + rlen - wbuf->offs, len - rlen);
+	spin_unlock(&wbuf->lock);
+
+	if (rlen > 0)
+		/* Read everything that goes before write-buffer */
+		return ubifs_leb_read(c, lnum, buf, offs, rlen, 0);
+
+	return 0;
+}
+
+/**
  * validate_data_node - validate data nodes for bulk-read.
  * @c: UBIFS file-system description object
  * @buf: buffer containing data node to validate
@@ -1647,8 +1706,8 @@ static int validate_data_node(struct ubifs_info *c, void *buf,
 	if (!keys_eq(c, &zbr->key, &key1)) {
 		ubifs_err("bad key in node at LEB %d:%d",
 			  zbr->lnum, zbr->offs);
-		dbg_tnc("looked for key %s found node's key %s",
-			DBGKEY(&zbr->key), DBGKEY1(&key1));
+		dbg_tnck(&zbr->key, "looked for key ");
+		dbg_tnck(&key1, "found node's key ");
 		goto out_err;
 	}
 
@@ -1658,8 +1717,8 @@ out_err:
 	err = -EINVAL;
 out:
 	ubifs_err("bad node at LEB %d:%d", zbr->lnum, zbr->offs);
-	dbg_dump_node(c, buf);
-	dbg_dump_stack();
+	ubifs_dump_node(c, buf);
+	dump_stack();
 	return err;
 }
 
@@ -1676,6 +1735,7 @@ out:
 int ubifs_tnc_bulk_read(struct ubifs_info *c, struct bu_info *bu)
 {
 	int lnum = bu->zbranch[0].lnum, offs = bu->zbranch[0].offs, len, err, i;
+	struct ubifs_wbuf *wbuf;
 	void *buf;
 
 	len = bu->zbranch[bu->cnt - 1].offs;
@@ -1686,7 +1746,11 @@ int ubifs_tnc_bulk_read(struct ubifs_info *c, struct bu_info *bu)
 	}
 
 	/* Do the read */
-	err = ubi_read(c->ubi, lnum, bu->buf, offs, len);
+	wbuf = ubifs_get_wbuf(c, lnum);
+	if (wbuf)
+		err = read_wbuf(wbuf, bu->buf, len, lnum, offs);
+	else
+		err = ubifs_leb_read(c, lnum, bu->buf, offs, len, 0);
 
 	/* Check for a race with GC */
 	if (maybe_leb_gced(c, lnum, bu->gc_seq))
@@ -1695,8 +1759,8 @@ int ubifs_tnc_bulk_read(struct ubifs_info *c, struct bu_info *bu)
 	if (err && err != -EBADMSG) {
 		ubifs_err("failed to read from LEB %d:%d, error %d",
 			  lnum, offs, err);
-		dbg_dump_stack();
-		dbg_tnc("key %s", DBGKEY(&bu->key));
+		dump_stack();
+		dbg_tnck(&bu->key, "key ");
 		return err;
 	}
 
@@ -1731,7 +1795,7 @@ static int do_lookup_nm(struct ubifs_info *c, const union ubifs_key *key,
 	int found, n, err;
 	struct ubifs_znode *znode;
 
-	dbg_tnc("name '%.*s' key %s", nm->len, nm->name, DBGKEY(key));
+	dbg_tnck(key, "name '%.*s' key ", nm->len, nm->name);
 	mutex_lock(&c->tnc_mutex);
 	found = ubifs_lookup_level0(c, key, &znode, &n);
 	if (!found) {
@@ -1905,8 +1969,7 @@ again:
 	zp = znode->parent;
 	if (znode->child_cnt < c->fanout) {
 		ubifs_assert(n != c->fanout);
-		dbg_tnc("inserted at %d level %d, key %s", n, znode->level,
-			DBGKEY(key));
+		dbg_tnck(key, "inserted at %d level %d, key ", n, znode->level);
 
 		insert_zbranch(znode, zbr, n);
 
@@ -1921,7 +1984,7 @@ again:
 	 * Unfortunately, @znode does not have more empty slots and we have to
 	 * split it.
 	 */
-	dbg_tnc("splitting level %d, key %s", znode->level, DBGKEY(key));
+	dbg_tnck(key, "splitting level %d, key ", znode->level);
 
 	if (znode->alt)
 		/*
@@ -2015,7 +2078,7 @@ do_split:
 	}
 
 	/* Insert new key and branch */
-	dbg_tnc("inserting at %d level %d, key %s", n, zn->level, DBGKEY(key));
+	dbg_tnck(key, "inserting at %d level %d, key ", n, zn->level);
 
 	insert_zbranch(zi, zbr, n);
 
@@ -2091,7 +2154,7 @@ int ubifs_tnc_add(struct ubifs_info *c, const union ubifs_key *key, int lnum,
 	struct ubifs_znode *znode;
 
 	mutex_lock(&c->tnc_mutex);
-	dbg_tnc("%d:%d, len %d, key %s", lnum, offs, len, DBGKEY(key));
+	dbg_tnck(key, "%d:%d, len %d, key ", lnum, offs, len);
 	found = lookup_level0_dirty(c, key, &znode, &n);
 	if (!found) {
 		struct ubifs_zbranch zbr;
@@ -2140,8 +2203,8 @@ int ubifs_tnc_replace(struct ubifs_info *c, const union ubifs_key *key,
 	struct ubifs_znode *znode;
 
 	mutex_lock(&c->tnc_mutex);
-	dbg_tnc("old LEB %d:%d, new LEB %d:%d, len %d, key %s", old_lnum,
-		old_offs, lnum, offs, len, DBGKEY(key));
+	dbg_tnck(key, "old LEB %d:%d, new LEB %d:%d, len %d, key ", old_lnum,
+		 old_offs, lnum, offs, len);
 	found = lookup_level0_dirty(c, key, &znode, &n);
 	if (found < 0) {
 		err = found;
@@ -2223,8 +2286,8 @@ int ubifs_tnc_add_nm(struct ubifs_info *c, const union ubifs_key *key,
 	struct ubifs_znode *znode;
 
 	mutex_lock(&c->tnc_mutex);
-	dbg_tnc("LEB %d:%d, name '%.*s', key %s", lnum, offs, nm->len, nm->name,
-		DBGKEY(key));
+	dbg_tnck(key, "LEB %d:%d, name '%.*s', key ",
+		 lnum, offs, nm->len, nm->name);
 	found = lookup_level0_dirty(c, key, &znode, &n);
 	if (found < 0) {
 		err = found;
@@ -2282,7 +2345,7 @@ int ubifs_tnc_add_nm(struct ubifs_info *c, const union ubifs_key *key,
 			 * by passing 'ubifs_tnc_remove_nm()' the same key but
 			 * an unmatchable name.
 			 */
-			struct qstr noname = { .len = 0, .name = "" };
+			struct qstr noname = { .name = "" };
 
 			err = dbg_check_tnc(c, 0);
 			mutex_unlock(&c->tnc_mutex);
@@ -2317,14 +2380,14 @@ static int tnc_delete(struct ubifs_info *c, struct ubifs_znode *znode, int n)
 	/* Delete without merge for now */
 	ubifs_assert(znode->level == 0);
 	ubifs_assert(n >= 0 && n < c->fanout);
-	dbg_tnc("deleting %s", DBGKEY(&znode->zbranch[n].key));
+	dbg_tnck(&znode->zbranch[n].key, "deleting key ");
 
 	zbr = &znode->zbranch[n];
 	lnc_free(zbr);
 
 	err = ubifs_add_dirt(c, zbr->lnum, zbr->len);
 	if (err) {
-		dbg_dump_znode(c, znode);
+		ubifs_dump_znode(c, znode);
 		return err;
 	}
 
@@ -2342,7 +2405,7 @@ static int tnc_delete(struct ubifs_info *c, struct ubifs_znode *znode, int n)
 	 */
 
 	do {
-		ubifs_assert(!test_bit(OBSOLETE_ZNODE, &znode->flags));
+		ubifs_assert(!ubifs_zn_obsolete(znode));
 		ubifs_assert(ubifs_zn_dirty(znode));
 
 		zp = znode->parent;
@@ -2398,9 +2461,8 @@ static int tnc_delete(struct ubifs_info *c, struct ubifs_znode *znode, int n)
 			c->zroot.offs = zbr->offs;
 			c->zroot.len = zbr->len;
 			c->zroot.znode = znode;
-			ubifs_assert(!test_bit(OBSOLETE_ZNODE,
-				     &zp->flags));
-			ubifs_assert(test_bit(DIRTY_ZNODE, &zp->flags));
+			ubifs_assert(!ubifs_zn_obsolete(zp));
+			ubifs_assert(ubifs_zn_dirty(zp));
 			atomic_long_dec(&c->dirty_zn_cnt);
 
 			if (zp->cnext) {
@@ -2428,7 +2490,7 @@ int ubifs_tnc_remove(struct ubifs_info *c, const union ubifs_key *key)
 	struct ubifs_znode *znode;
 
 	mutex_lock(&c->tnc_mutex);
-	dbg_tnc("key %s", DBGKEY(key));
+	dbg_tnck(key, "key ");
 	found = lookup_level0_dirty(c, key, &znode, &n);
 	if (found < 0) {
 		err = found;
@@ -2459,7 +2521,7 @@ int ubifs_tnc_remove_nm(struct ubifs_info *c, const union ubifs_key *key,
 	struct ubifs_znode *znode;
 
 	mutex_lock(&c->tnc_mutex);
-	dbg_tnc("%.*s, key %s", nm->len, nm->name, DBGKEY(key));
+	dbg_tnck(key, "%.*s, key ", nm->len, nm->name);
 	err = lookup_level0_dirty(c, key, &znode, &n);
 	if (err < 0)
 		goto out_unlock;
@@ -2476,11 +2538,11 @@ int ubifs_tnc_remove_nm(struct ubifs_info *c, const union ubifs_key *key,
 		if (err) {
 			/* Ensure the znode is dirtied */
 			if (znode->cnext || !ubifs_zn_dirty(znode)) {
-				    znode = dirty_cow_bottom_up(c, znode);
-				    if (IS_ERR(znode)) {
-					    err = PTR_ERR(znode);
-					    goto out_unlock;
-				    }
+				znode = dirty_cow_bottom_up(c, znode);
+				if (IS_ERR(znode)) {
+					err = PTR_ERR(znode);
+					goto out_unlock;
+				}
 			}
 			err = tnc_delete(c, znode, n);
 		}
@@ -2571,10 +2633,10 @@ int ubifs_tnc_remove_range(struct ubifs_info *c, union ubifs_key *from_key,
 			err = ubifs_add_dirt(c, znode->zbranch[i].lnum,
 					     znode->zbranch[i].len);
 			if (err) {
-				dbg_dump_znode(c, znode);
+				ubifs_dump_znode(c, znode);
 				goto out_unlock;
 			}
-			dbg_tnc("removing %s", DBGKEY(key));
+			dbg_tnck(key, "removing key ");
 		}
 		if (k) {
 			for (i = n + 1 + k; i < znode->child_cnt; i++)
@@ -2633,7 +2695,7 @@ int ubifs_tnc_remove_ino(struct ubifs_info *c, ino_t inum)
 		dbg_tnc("xent '%s', ino %lu", xent->name,
 			(unsigned long)xattr_inum);
 
-		nm.name = (char *)xent->name;
+		nm.name = xent->name;
 		nm.len = le16_to_cpu(xent->nlen);
 		err = ubifs_tnc_remove_nm(c, &key1, &nm);
 		if (err) {
@@ -2694,7 +2756,7 @@ struct ubifs_dent_node *ubifs_tnc_next_ent(struct ubifs_info *c,
 	struct ubifs_zbranch *zbr;
 	union ubifs_key *dkey;
 
-	dbg_tnc("%s %s", nm->name ? (char *)nm->name : "(lowest)", DBGKEY(key));
+	dbg_tnck(key, "%s ", nm->name ? (char *)nm->name : "(lowest)");
 	ubifs_assert(is_hash_key(c, key));
 
 	mutex_lock(&c->tnc_mutex);
@@ -2765,3 +2827,503 @@ out_unlock:
 	mutex_unlock(&c->tnc_mutex);
 	return ERR_PTR(err);
 }
+
+#ifndef __UBOOT__
+/**
+ * tnc_destroy_cnext - destroy left-over obsolete znodes from a failed commit.
+ * @c: UBIFS file-system description object
+ *
+ * Destroy left-over obsolete znodes from a failed commit.
+ */
+static void tnc_destroy_cnext(struct ubifs_info *c)
+{
+	struct ubifs_znode *cnext;
+
+	if (!c->cnext)
+		return;
+	ubifs_assert(c->cmt_state == COMMIT_BROKEN);
+	cnext = c->cnext;
+	do {
+		struct ubifs_znode *znode = cnext;
+
+		cnext = cnext->cnext;
+		if (ubifs_zn_obsolete(znode))
+			kfree(znode);
+	} while (cnext && cnext != c->cnext);
+}
+
+/**
+ * ubifs_tnc_close - close TNC subsystem and free all related resources.
+ * @c: UBIFS file-system description object
+ */
+void ubifs_tnc_close(struct ubifs_info *c)
+{
+	tnc_destroy_cnext(c);
+	if (c->zroot.znode) {
+		long n;
+
+		ubifs_destroy_tnc_subtree(c->zroot.znode);
+		n = atomic_long_read(&c->clean_zn_cnt);
+		atomic_long_sub(n, &ubifs_clean_zn_cnt);
+	}
+	kfree(c->gap_lebs);
+	kfree(c->ilebs);
+	destroy_old_idx(c);
+}
+#endif
+
+/**
+ * left_znode - get the znode to the left.
+ * @c: UBIFS file-system description object
+ * @znode: znode
+ *
+ * This function returns a pointer to the znode to the left of @znode or NULL if
+ * there is not one. A negative error code is returned on failure.
+ */
+static struct ubifs_znode *left_znode(struct ubifs_info *c,
+				      struct ubifs_znode *znode)
+{
+	int level = znode->level;
+
+	while (1) {
+		int n = znode->iip - 1;
+
+		/* Go up until we can go left */
+		znode = znode->parent;
+		if (!znode)
+			return NULL;
+		if (n >= 0) {
+			/* Now go down the rightmost branch to 'level' */
+			znode = get_znode(c, znode, n);
+			if (IS_ERR(znode))
+				return znode;
+			while (znode->level != level) {
+				n = znode->child_cnt - 1;
+				znode = get_znode(c, znode, n);
+				if (IS_ERR(znode))
+					return znode;
+			}
+			break;
+		}
+	}
+	return znode;
+}
+
+/**
+ * right_znode - get the znode to the right.
+ * @c: UBIFS file-system description object
+ * @znode: znode
+ *
+ * This function returns a pointer to the znode to the right of @znode or NULL
+ * if there is not one. A negative error code is returned on failure.
+ */
+static struct ubifs_znode *right_znode(struct ubifs_info *c,
+				       struct ubifs_znode *znode)
+{
+	int level = znode->level;
+
+	while (1) {
+		int n = znode->iip + 1;
+
+		/* Go up until we can go right */
+		znode = znode->parent;
+		if (!znode)
+			return NULL;
+		if (n < znode->child_cnt) {
+			/* Now go down the leftmost branch to 'level' */
+			znode = get_znode(c, znode, n);
+			if (IS_ERR(znode))
+				return znode;
+			while (znode->level != level) {
+				znode = get_znode(c, znode, 0);
+				if (IS_ERR(znode))
+					return znode;
+			}
+			break;
+		}
+	}
+	return znode;
+}
+
+/**
+ * lookup_znode - find a particular indexing node from TNC.
+ * @c: UBIFS file-system description object
+ * @key: index node key to lookup
+ * @level: index node level
+ * @lnum: index node LEB number
+ * @offs: index node offset
+ *
+ * This function searches an indexing node by its first key @key and its
+ * address @lnum:@offs. It looks up the indexing tree by pulling all indexing
+ * nodes it traverses to TNC. This function is called for indexing nodes which
+ * were found on the media by scanning, for example when garbage-collecting or
+ * when doing in-the-gaps commit. This means that the indexing node which is
+ * looked for does not have to have exactly the same leftmost key @key, because
+ * the leftmost key may have been changed, in which case TNC will contain a
+ * dirty znode which still refers the same @lnum:@offs. This function is clever
+ * enough to recognize such indexing nodes.
+ *
+ * Note, if a znode was deleted or changed too much, then this function will
+ * not find it. For situations like this UBIFS has the old index RB-tree
+ * (indexed by @lnum:@offs).
+ *
+ * This function returns a pointer to the znode found or %NULL if it is not
+ * found. A negative error code is returned on failure.
+ */
+static struct ubifs_znode *lookup_znode(struct ubifs_info *c,
+					union ubifs_key *key, int level,
+					int lnum, int offs)
+{
+	struct ubifs_znode *znode, *zn;
+	int n, nn;
+
+	ubifs_assert(key_type(c, key) < UBIFS_INVALID_KEY);
+
+	/*
+	 * The arguments have probably been read off flash, so don't assume
+	 * they are valid.
+	 */
+	if (level < 0)
+		return ERR_PTR(-EINVAL);
+
+	/* Get the root znode */
+	znode = c->zroot.znode;
+	if (!znode) {
+		znode = ubifs_load_znode(c, &c->zroot, NULL, 0);
+		if (IS_ERR(znode))
+			return znode;
+	}
+	/* Check if it is the one we are looking for */
+	if (c->zroot.lnum == lnum && c->zroot.offs == offs)
+		return znode;
+	/* Descend to the parent level i.e. (level + 1) */
+	if (level >= znode->level)
+		return NULL;
+	while (1) {
+		ubifs_search_zbranch(c, znode, key, &n);
+		if (n < 0) {
+			/*
+			 * We reached a znode where the leftmost key is greater
+			 * than the key we are searching for. This is the same
+			 * situation as the one described in a huge comment at
+			 * the end of the 'ubifs_lookup_level0()' function. And
+			 * for exactly the same reasons we have to try to look
+			 * left before giving up.
+			 */
+			znode = left_znode(c, znode);
+			if (!znode)
+				return NULL;
+			if (IS_ERR(znode))
+				return znode;
+			ubifs_search_zbranch(c, znode, key, &n);
+			ubifs_assert(n >= 0);
+		}
+		if (znode->level == level + 1)
+			break;
+		znode = get_znode(c, znode, n);
+		if (IS_ERR(znode))
+			return znode;
+	}
+	/* Check if the child is the one we are looking for */
+	if (znode->zbranch[n].lnum == lnum && znode->zbranch[n].offs == offs)
+		return get_znode(c, znode, n);
+	/* If the key is unique, there is nowhere else to look */
+	if (!is_hash_key(c, key))
+		return NULL;
+	/*
+	 * The key is not unique and so may be also in the znodes to either
+	 * side.
+	 */
+	zn = znode;
+	nn = n;
+	/* Look left */
+	while (1) {
+		/* Move one branch to the left */
+		if (n)
+			n -= 1;
+		else {
+			znode = left_znode(c, znode);
+			if (!znode)
+				break;
+			if (IS_ERR(znode))
+				return znode;
+			n = znode->child_cnt - 1;
+		}
+		/* Check it */
+		if (znode->zbranch[n].lnum == lnum &&
+		    znode->zbranch[n].offs == offs)
+			return get_znode(c, znode, n);
+		/* Stop if the key is less than the one we are looking for */
+		if (keys_cmp(c, &znode->zbranch[n].key, key) < 0)
+			break;
+	}
+	/* Back to the middle */
+	znode = zn;
+	n = nn;
+	/* Look right */
+	while (1) {
+		/* Move one branch to the right */
+		if (++n >= znode->child_cnt) {
+			znode = right_znode(c, znode);
+			if (!znode)
+				break;
+			if (IS_ERR(znode))
+				return znode;
+			n = 0;
+		}
+		/* Check it */
+		if (znode->zbranch[n].lnum == lnum &&
+		    znode->zbranch[n].offs == offs)
+			return get_znode(c, znode, n);
+		/* Stop if the key is greater than the one we are looking for */
+		if (keys_cmp(c, &znode->zbranch[n].key, key) > 0)
+			break;
+	}
+	return NULL;
+}
+
+/**
+ * is_idx_node_in_tnc - determine if an index node is in the TNC.
+ * @c: UBIFS file-system description object
+ * @key: key of index node
+ * @level: index node level
+ * @lnum: LEB number of index node
+ * @offs: offset of index node
+ *
+ * This function returns %0 if the index node is not referred to in the TNC, %1
+ * if the index node is referred to in the TNC and the corresponding znode is
+ * dirty, %2 if an index node is referred to in the TNC and the corresponding
+ * znode is clean, and a negative error code in case of failure.
+ *
+ * Note, the @key argument has to be the key of the first child. Also note,
+ * this function relies on the fact that 0:0 is never a valid LEB number and
+ * offset for a main-area node.
+ */
+int is_idx_node_in_tnc(struct ubifs_info *c, union ubifs_key *key, int level,
+		       int lnum, int offs)
+{
+	struct ubifs_znode *znode;
+
+	znode = lookup_znode(c, key, level, lnum, offs);
+	if (!znode)
+		return 0;
+	if (IS_ERR(znode))
+		return PTR_ERR(znode);
+
+	return ubifs_zn_dirty(znode) ? 1 : 2;
+}
+
+/**
+ * is_leaf_node_in_tnc - determine if a non-indexing not is in the TNC.
+ * @c: UBIFS file-system description object
+ * @key: node key
+ * @lnum: node LEB number
+ * @offs: node offset
+ *
+ * This function returns %1 if the node is referred to in the TNC, %0 if it is
+ * not, and a negative error code in case of failure.
+ *
+ * Note, this function relies on the fact that 0:0 is never a valid LEB number
+ * and offset for a main-area node.
+ */
+static int is_leaf_node_in_tnc(struct ubifs_info *c, union ubifs_key *key,
+			       int lnum, int offs)
+{
+	struct ubifs_zbranch *zbr;
+	struct ubifs_znode *znode, *zn;
+	int n, found, err, nn;
+	const int unique = !is_hash_key(c, key);
+
+	found = ubifs_lookup_level0(c, key, &znode, &n);
+	if (found < 0)
+		return found; /* Error code */
+	if (!found)
+		return 0;
+	zbr = &znode->zbranch[n];
+	if (lnum == zbr->lnum && offs == zbr->offs)
+		return 1; /* Found it */
+	if (unique)
+		return 0;
+	/*
+	 * Because the key is not unique, we have to look left
+	 * and right as well
+	 */
+	zn = znode;
+	nn = n;
+	/* Look left */
+	while (1) {
+		err = tnc_prev(c, &znode, &n);
+		if (err == -ENOENT)
+			break;
+		if (err)
+			return err;
+		if (keys_cmp(c, key, &znode->zbranch[n].key))
+			break;
+		zbr = &znode->zbranch[n];
+		if (lnum == zbr->lnum && offs == zbr->offs)
+			return 1; /* Found it */
+	}
+	/* Look right */
+	znode = zn;
+	n = nn;
+	while (1) {
+		err = tnc_next(c, &znode, &n);
+		if (err) {
+			if (err == -ENOENT)
+				return 0;
+			return err;
+		}
+		if (keys_cmp(c, key, &znode->zbranch[n].key))
+			break;
+		zbr = &znode->zbranch[n];
+		if (lnum == zbr->lnum && offs == zbr->offs)
+			return 1; /* Found it */
+	}
+	return 0;
+}
+
+/**
+ * ubifs_tnc_has_node - determine whether a node is in the TNC.
+ * @c: UBIFS file-system description object
+ * @key: node key
+ * @level: index node level (if it is an index node)
+ * @lnum: node LEB number
+ * @offs: node offset
+ * @is_idx: non-zero if the node is an index node
+ *
+ * This function returns %1 if the node is in the TNC, %0 if it is not, and a
+ * negative error code in case of failure. For index nodes, @key has to be the
+ * key of the first child. An index node is considered to be in the TNC only if
+ * the corresponding znode is clean or has not been loaded.
+ */
+int ubifs_tnc_has_node(struct ubifs_info *c, union ubifs_key *key, int level,
+		       int lnum, int offs, int is_idx)
+{
+	int err;
+
+	mutex_lock(&c->tnc_mutex);
+	if (is_idx) {
+		err = is_idx_node_in_tnc(c, key, level, lnum, offs);
+		if (err < 0)
+			goto out_unlock;
+		if (err == 1)
+			/* The index node was found but it was dirty */
+			err = 0;
+		else if (err == 2)
+			/* The index node was found and it was clean */
+			err = 1;
+		else
+			BUG_ON(err != 0);
+	} else
+		err = is_leaf_node_in_tnc(c, key, lnum, offs);
+
+out_unlock:
+	mutex_unlock(&c->tnc_mutex);
+	return err;
+}
+
+/**
+ * ubifs_dirty_idx_node - dirty an index node.
+ * @c: UBIFS file-system description object
+ * @key: index node key
+ * @level: index node level
+ * @lnum: index node LEB number
+ * @offs: index node offset
+ *
+ * This function loads and dirties an index node so that it can be garbage
+ * collected. The @key argument has to be the key of the first child. This
+ * function relies on the fact that 0:0 is never a valid LEB number and offset
+ * for a main-area node. Returns %0 on success and a negative error code on
+ * failure.
+ */
+int ubifs_dirty_idx_node(struct ubifs_info *c, union ubifs_key *key, int level,
+			 int lnum, int offs)
+{
+	struct ubifs_znode *znode;
+	int err = 0;
+
+	mutex_lock(&c->tnc_mutex);
+	znode = lookup_znode(c, key, level, lnum, offs);
+	if (!znode)
+		goto out_unlock;
+	if (IS_ERR(znode)) {
+		err = PTR_ERR(znode);
+		goto out_unlock;
+	}
+	znode = dirty_cow_bottom_up(c, znode);
+	if (IS_ERR(znode)) {
+		err = PTR_ERR(znode);
+		goto out_unlock;
+	}
+
+out_unlock:
+	mutex_unlock(&c->tnc_mutex);
+	return err;
+}
+
+/**
+ * dbg_check_inode_size - check if inode size is correct.
+ * @c: UBIFS file-system description object
+ * @inum: inode number
+ * @size: inode size
+ *
+ * This function makes sure that the inode size (@size) is correct and it does
+ * not have any pages beyond @size. Returns zero if the inode is OK, %-EINVAL
+ * if it has a data page beyond @size, and other negative error code in case of
+ * other errors.
+ */
+int dbg_check_inode_size(struct ubifs_info *c, const struct inode *inode,
+			 loff_t size)
+{
+	int err, n;
+	union ubifs_key from_key, to_key, *key;
+	struct ubifs_znode *znode;
+	unsigned int block;
+
+	if (!S_ISREG(inode->i_mode))
+		return 0;
+	if (!dbg_is_chk_gen(c))
+		return 0;
+
+	block = (size + UBIFS_BLOCK_SIZE - 1) >> UBIFS_BLOCK_SHIFT;
+	data_key_init(c, &from_key, inode->i_ino, block);
+	highest_data_key(c, &to_key, inode->i_ino);
+
+	mutex_lock(&c->tnc_mutex);
+	err = ubifs_lookup_level0(c, &from_key, &znode, &n);
+	if (err < 0)
+		goto out_unlock;
+
+	if (err) {
+		err = -EINVAL;
+		key = &from_key;
+		goto out_dump;
+	}
+
+	err = tnc_next(c, &znode, &n);
+	if (err == -ENOENT) {
+		err = 0;
+		goto out_unlock;
+	}
+	if (err < 0)
+		goto out_unlock;
+
+	ubifs_assert(err == 0);
+	key = &znode->zbranch[n].key;
+	if (!key_in_range(c, key, &from_key, &to_key))
+		goto out_unlock;
+
+out_dump:
+	block = key_block(c, key);
+	ubifs_err("inode %lu has size %lld, but there are data at offset %lld",
+		  (unsigned long)inode->i_ino, size,
+		  ((loff_t)block) << UBIFS_BLOCK_SHIFT);
+	mutex_unlock(&c->tnc_mutex);
+	ubifs_dump_inode(c, inode);
+	dump_stack();
+	return -EINVAL;
+
+out_unlock:
+	mutex_unlock(&c->tnc_mutex);
+	return err;
+}
diff --git a/fs/ubifs/tnc_misc.c b/fs/ubifs/tnc_misc.c
index 955219f..81bdad9 100644
--- a/fs/ubifs/tnc_misc.c
+++ b/fs/ubifs/tnc_misc.c
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Adrian Hunter
  *          Artem Bityutskiy (Битюцкий Артём)
@@ -27,6 +16,10 @@
  * putting it all in one file would make that file too big and unreadable.
  */
 
+#define __UBOOT__
+#ifdef __UBOOT__
+#include <linux/err.h>
+#endif
 #include "ubifs.h"
 
 /**
@@ -219,6 +212,44 @@ struct ubifs_znode *ubifs_tnc_postorder_next(struct ubifs_znode *znode)
 }
 
 /**
+ * ubifs_destroy_tnc_subtree - destroy all znodes connected to a subtree.
+ * @znode: znode defining subtree to destroy
+ *
+ * This function destroys subtree of the TNC tree. Returns number of clean
+ * znodes in the subtree.
+ */
+long ubifs_destroy_tnc_subtree(struct ubifs_znode *znode)
+{
+	struct ubifs_znode *zn = ubifs_tnc_postorder_first(znode);
+	long clean_freed = 0;
+	int n;
+
+	ubifs_assert(zn);
+	while (1) {
+		for (n = 0; n < zn->child_cnt; n++) {
+			if (!zn->zbranch[n].znode)
+				continue;
+
+			if (zn->level > 0 &&
+			    !ubifs_zn_dirty(zn->zbranch[n].znode))
+				clean_freed += 1;
+
+			cond_resched();
+			kfree(zn->zbranch[n].znode);
+		}
+
+		if (zn == znode) {
+			if (!ubifs_zn_dirty(zn))
+				clean_freed += 1;
+			kfree(zn);
+			return clean_freed;
+		}
+
+		zn = ubifs_tnc_postorder_next(zn);
+	}
+}
+
+/**
  * read_znode - read an indexing node from flash and fill znode.
  * @c: UBIFS file-system description object
  * @lnum: LEB of the indexing node to read
@@ -255,10 +286,10 @@ static int read_znode(struct ubifs_info *c, int lnum, int offs, int len,
 		lnum, offs, znode->level, znode->child_cnt);
 
 	if (znode->child_cnt > c->fanout || znode->level > UBIFS_MAX_LEVELS) {
-		dbg_err("current fanout %d, branch count %d",
-			c->fanout, znode->child_cnt);
-		dbg_err("max levels %d, znode level %d",
-			UBIFS_MAX_LEVELS, znode->level);
+		ubifs_err("current fanout %d, branch count %d",
+			  c->fanout, znode->child_cnt);
+		ubifs_err("max levels %d, znode level %d",
+			  UBIFS_MAX_LEVELS, znode->level);
 		err = 1;
 		goto out_dump;
 	}
@@ -278,7 +309,7 @@ static int read_znode(struct ubifs_info *c, int lnum, int offs, int len,
 		if (zbr->lnum < c->main_first ||
 		    zbr->lnum >= c->leb_cnt || zbr->offs < 0 ||
 		    zbr->offs + zbr->len > c->leb_size || zbr->offs & 7) {
-			dbg_err("bad branch %d", i);
+			ubifs_err("bad branch %d", i);
 			err = 2;
 			goto out_dump;
 		}
@@ -290,8 +321,8 @@ static int read_znode(struct ubifs_info *c, int lnum, int offs, int len,
 		case UBIFS_XENT_KEY:
 			break;
 		default:
-			dbg_msg("bad key type at slot %d: %s", i,
-				DBGKEY(&zbr->key));
+			ubifs_err("bad key type at slot %d: %d",
+				  i, key_type(c, &zbr->key));
 			err = 3;
 			goto out_dump;
 		}
@@ -302,19 +333,19 @@ static int read_znode(struct ubifs_info *c, int lnum, int offs, int len,
 		type = key_type(c, &zbr->key);
 		if (c->ranges[type].max_len == 0) {
 			if (zbr->len != c->ranges[type].len) {
-				dbg_err("bad target node (type %d) length (%d)",
-					type, zbr->len);
-				dbg_err("have to be %d", c->ranges[type].len);
+				ubifs_err("bad target node (type %d) length (%d)",
+					  type, zbr->len);
+				ubifs_err("have to be %d", c->ranges[type].len);
 				err = 4;
 				goto out_dump;
 			}
 		} else if (zbr->len < c->ranges[type].min_len ||
 			   zbr->len > c->ranges[type].max_len) {
-			dbg_err("bad target node (type %d) length (%d)",
-				type, zbr->len);
-			dbg_err("have to be in range of %d-%d",
-				c->ranges[type].min_len,
-				c->ranges[type].max_len);
+			ubifs_err("bad target node (type %d) length (%d)",
+				  type, zbr->len);
+			ubifs_err("have to be in range of %d-%d",
+				  c->ranges[type].min_len,
+				  c->ranges[type].max_len);
 			err = 5;
 			goto out_dump;
 		}
@@ -332,13 +363,13 @@ static int read_znode(struct ubifs_info *c, int lnum, int offs, int len,
 
 		cmp = keys_cmp(c, key1, key2);
 		if (cmp > 0) {
-			dbg_err("bad key order (keys %d and %d)", i, i + 1);
+			ubifs_err("bad key order (keys %d and %d)", i, i + 1);
 			err = 6;
 			goto out_dump;
 		} else if (cmp == 0 && !is_hash_key(c, key1)) {
 			/* These can only be keys with colliding hash */
-			dbg_err("keys %d and %d are not hashed but equivalent",
-				i, i + 1);
+			ubifs_err("keys %d and %d are not hashed but equivalent",
+				  i, i + 1);
 			err = 7;
 			goto out_dump;
 		}
@@ -349,7 +380,7 @@ static int read_znode(struct ubifs_info *c, int lnum, int offs, int len,
 
 out_dump:
 	ubifs_err("bad indexing node at LEB %d:%d, error %d", lnum, offs, err);
-	dbg_dump_node(c, idx);
+	ubifs_dump_node(c, idx);
 	kfree(idx);
 	return -EINVAL;
 }
@@ -385,6 +416,16 @@ struct ubifs_znode *ubifs_load_znode(struct ubifs_info *c,
 	if (err)
 		goto out;
 
+	atomic_long_inc(&c->clean_zn_cnt);
+
+	/*
+	 * Increment the global clean znode counter as well. It is OK that
+	 * global and per-FS clean znode counters may be inconsistent for some
+	 * short time (because we might be preempted at this point), the global
+	 * one is only used in shrinker.
+	 */
+	atomic_long_inc(&ubifs_clean_zn_cnt);
+
 	zbr->znode = znode;
 	znode->parent = parent;
 	znode->time = get_seconds();
@@ -412,11 +453,22 @@ int ubifs_tnc_read_node(struct ubifs_info *c, struct ubifs_zbranch *zbr,
 {
 	union ubifs_key key1, *key = &zbr->key;
 	int err, type = key_type(c, key);
+	struct ubifs_wbuf *wbuf;
 
-	err = ubifs_read_node(c, node, type, zbr->len, zbr->lnum, zbr->offs);
+	/*
+	 * 'zbr' has to point to on-flash node. The node may sit in a bud and
+	 * may even be in a write buffer, so we have to take care about this.
+	 */
+	wbuf = ubifs_get_wbuf(c, zbr->lnum);
+	if (wbuf)
+		err = ubifs_read_node_wbuf(wbuf, node, type, zbr->len,
+					   zbr->lnum, zbr->offs);
+	else
+		err = ubifs_read_node(c, node, type, zbr->len, zbr->lnum,
+				      zbr->offs);
 
 	if (err) {
-		dbg_tnc("key %s", DBGKEY(key));
+		dbg_tnck(key, "key ");
 		return err;
 	}
 
@@ -425,9 +477,9 @@ int ubifs_tnc_read_node(struct ubifs_info *c, struct ubifs_zbranch *zbr,
 	if (!keys_eq(c, key, &key1)) {
 		ubifs_err("bad key in node at LEB %d:%d",
 			  zbr->lnum, zbr->offs);
-		dbg_tnc("looked for key %s found node's key %s",
-			DBGKEY(key), DBGKEY1(&key1));
-		dbg_dump_node(c, node);
+		dbg_tnck(key, "looked for key ");
+		dbg_tnck(&key1, "but found node's key ");
+		ubifs_dump_node(c, node);
 		return -EINVAL;
 	}
 
diff --git a/fs/ubifs/ubifs-media.h b/fs/ubifs/ubifs-media.h
index 3eee07e..90b8ffa 100644
--- a/fs/ubifs/ubifs-media.h
+++ b/fs/ubifs/ubifs-media.h
@@ -3,18 +3,7 @@
  *
  * Copyright (C) 2006-2008 Nokia Corporation.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Artem Bityutskiy (Битюцкий Артём)
  *          Adrian Hunter
@@ -135,6 +124,13 @@
 /* The key is always at the same position in all keyed nodes */
 #define UBIFS_KEY_OFFSET offsetof(struct ubifs_ino_node, key)
 
+/* Garbage collector journal head number */
+#define UBIFS_GC_HEAD   0
+/* Base journal head number */
+#define UBIFS_BASE_HEAD 1
+/* Data journal head number */
+#define UBIFS_DATA_HEAD 2
+
 /*
  * LEB Properties Tree node types.
  *
@@ -401,9 +397,11 @@ enum {
  * Superblock flags.
  *
  * UBIFS_FLG_BIGLPT: if "big" LPT model is used if set
+ * UBIFS_FLG_SPACE_FIXUP: first-mount "fixup" of free space within LEBs needed
  */
 enum {
 	UBIFS_FLG_BIGLPT = 0x02,
+	UBIFS_FLG_SPACE_FIXUP = 0x04,
 };
 
 /**
@@ -427,7 +425,7 @@ struct ubifs_ch {
 	__u8 node_type;
 	__u8 group_type;
 	__u8 padding[2];
-} __attribute__ ((packed));
+} __packed;
 
 /**
  * union ubifs_dev_desc - device node descriptor.
@@ -441,7 +439,7 @@ struct ubifs_ch {
 union ubifs_dev_desc {
 	__le32 new;
 	__le64 huge;
-} __attribute__ ((packed));
+} __packed;
 
 /**
  * struct ubifs_ino_node - inode node.
@@ -502,7 +500,7 @@ struct ubifs_ino_node {
 	__le16 compr_type;
 	__u8 padding2[26]; /* Watch 'zero_ino_node_unused()' if changing! */
 	__u8 data[];
-} __attribute__ ((packed));
+} __packed;
 
 /**
  * struct ubifs_dent_node - directory entry node.
@@ -526,8 +524,12 @@ struct ubifs_dent_node {
 	__u8 type;
 	__le16 nlen;
 	__u8 padding2[4]; /* Watch 'zero_dent_node_unused()' if changing! */
+#ifndef __UBOOT__
 	__u8 name[];
-} __attribute__ ((packed));
+#else
+	char name[];
+#endif
+} __packed;
 
 /**
  * struct ubifs_data_node - data node.
@@ -548,7 +550,7 @@ struct ubifs_data_node {
 	__le16 compr_type;
 	__u8 padding[2]; /* Watch 'zero_data_node_unused()' if changing! */
 	__u8 data[];
-} __attribute__ ((packed));
+} __packed;
 
 /**
  * struct ubifs_trun_node - truncation node.
@@ -568,7 +570,7 @@ struct ubifs_trun_node {
 	__u8 padding[12]; /* Watch 'zero_trun_node_unused()' if changing! */
 	__le64 old_size;
 	__le64 new_size;
-} __attribute__ ((packed));
+} __packed;
 
 /**
  * struct ubifs_pad_node - padding node.
@@ -579,7 +581,7 @@ struct ubifs_trun_node {
 struct ubifs_pad_node {
 	struct ubifs_ch ch;
 	__le32 pad_len;
-} __attribute__ ((packed));
+} __packed;
 
 /**
  * struct ubifs_sb_node - superblock node.
@@ -637,7 +639,7 @@ struct ubifs_sb_node {
 	__u8 uuid[16];
 	__le32 ro_compat_version;
 	__u8 padding2[3968];
-} __attribute__ ((packed));
+} __packed;
 
 /**
  * struct ubifs_mst_node - master node.
@@ -704,7 +706,7 @@ struct ubifs_mst_node {
 	__le32 idx_lebs;
 	__le32 leb_cnt;
 	__u8 padding[344];
-} __attribute__ ((packed));
+} __packed;
 
 /**
  * struct ubifs_ref_node - logical eraseblock reference node.
@@ -720,7 +722,7 @@ struct ubifs_ref_node {
 	__le32 offs;
 	__le32 jhead;
 	__u8 padding[28];
-} __attribute__ ((packed));
+} __packed;
 
 /**
  * struct ubifs_branch - key/reference/length branch
@@ -733,8 +735,12 @@ struct ubifs_branch {
 	__le32 lnum;
 	__le32 offs;
 	__le32 len;
+#ifndef __UBOOT__
 	__u8 key[];
-} __attribute__ ((packed));
+#else
+	char key[];
+#endif
+} __packed;
 
 /**
  * struct ubifs_idx_node - indexing node.
@@ -747,8 +753,12 @@ struct ubifs_idx_node {
 	struct ubifs_ch ch;
 	__le16 child_cnt;
 	__le16 level;
+#ifndef __UBOOT__
 	__u8 branches[];
-} __attribute__ ((packed));
+#else
+	char branches[];
+#endif
+} __packed;
 
 /**
  * struct ubifs_cs_node - commit start node.
@@ -758,7 +768,7 @@ struct ubifs_idx_node {
 struct ubifs_cs_node {
 	struct ubifs_ch ch;
 	__le64 cmt_no;
-} __attribute__ ((packed));
+} __packed;
 
 /**
  * struct ubifs_orph_node - orphan node.
@@ -770,6 +780,6 @@ struct ubifs_orph_node {
 	struct ubifs_ch ch;
 	__le64 cmt_no;
 	__le64 inos[];
-} __attribute__ ((packed));
+} __packed;
 
 #endif /* __UBIFS_MEDIA_H__ */
diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c
index 273c0a9..b91a6fd 100644
--- a/fs/ubifs/ubifs.c
+++ b/fs/ubifs/ubifs.c
@@ -26,6 +26,10 @@
 #include "ubifs.h"
 #include <u-boot/zlib.h>
 
+#define __UBOOT__
+#include <linux/err.h>
+#include <linux/lzo.h>
+
 DECLARE_GLOBAL_DATA_PTR;
 
 /* compress.c */
@@ -44,20 +48,27 @@ static int gzip_decompress(const unsigned char *in, size_t in_len,
 /* Fake description object for the "none" compressor */
 static struct ubifs_compressor none_compr = {
 	.compr_type = UBIFS_COMPR_NONE,
-	.name = "no compression",
+	.name = "none",
 	.capi_name = "",
 	.decompress = NULL,
 };
 
 static struct ubifs_compressor lzo_compr = {
 	.compr_type = UBIFS_COMPR_LZO,
-	.name = "LZO",
+#ifndef __UBOOT__
+	.comp_mutex = &lzo_mutex,
+#endif
+	.name = "lzo",
 	.capi_name = "lzo",
 	.decompress = lzo1x_decompress_safe,
 };
 
 static struct ubifs_compressor zlib_compr = {
 	.compr_type = UBIFS_COMPR_ZLIB,
+#ifndef __UBOOT__
+	.comp_mutex = &deflate_mutex,
+	.decomp_mutex = &inflate_mutex,
+#endif
 	.name = "zlib",
 	.capi_name = "deflate",
 	.decompress = gzip_decompress,
@@ -66,6 +77,82 @@ static struct ubifs_compressor zlib_compr = {
 /* All UBIFS compressors */
 struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT];
 
+
+#ifdef __UBOOT__
+/* from mm/util.c */
+
+/**
+ * kmemdup - duplicate region of memory
+ *
+ * @src: memory region to duplicate
+ * @len: memory region length
+ * @gfp: GFP mask to use
+ */
+void *kmemdup(const void *src, size_t len, gfp_t gfp)
+{
+	void *p;
+
+	p = kmalloc(len, gfp);
+	if (p)
+		memcpy(p, src, len);
+	return p;
+}
+
+struct crypto_comp {
+	int compressor;
+};
+
+static inline struct crypto_comp *crypto_alloc_comp(const char *alg_name,
+						u32 type, u32 mask)
+{
+	struct ubifs_compressor *comp;
+	struct crypto_comp *ptr;
+	int i = 0;
+
+	ptr = malloc(sizeof(struct crypto_comp));
+	while (i < UBIFS_COMPR_TYPES_CNT) {
+		comp = ubifs_compressors[i];
+		if (!comp) {
+			i++;
+			continue;
+		}
+		if (strncmp(alg_name, comp->capi_name, strlen(alg_name)) == 0) {
+			ptr->compressor = i;
+			return ptr;
+		}
+		i++;
+	}
+	if (i >= UBIFS_COMPR_TYPES_CNT) {
+		ubifs_err("invalid compression type %s", alg_name);
+		free (ptr);
+		return NULL;
+	}
+	return ptr;
+}
+static inline int crypto_comp_decompress(struct crypto_comp *tfm,
+				const u8 *src, unsigned int slen,
+				u8 *dst, unsigned int *dlen)
+{
+	struct ubifs_compressor *compr = ubifs_compressors[tfm->compressor];
+	int err;
+
+	if (compr->compr_type == UBIFS_COMPR_NONE) {
+		memcpy(dst, src, slen);
+		*dlen = slen;
+		return 0;
+	}
+
+	err = compr->decompress(src, slen, dst, (size_t *)dlen);
+	if (err)
+		ubifs_err("cannot decompress %d bytes, compressor %s, "
+			  "error %d", slen, compr->name, err);
+
+	return err;
+
+	return 0;
+}
+#endif
+
 /**
  * ubifs_decompress - decompress data.
  * @in_buf: data to decompress
@@ -102,10 +189,15 @@ int ubifs_decompress(const void *in_buf, int in_len, void *out_buf,
 		return 0;
 	}
 
-	err = compr->decompress(in_buf, in_len, out_buf, (size_t *)out_len);
+	if (compr->decomp_mutex)
+		mutex_lock(compr->decomp_mutex);
+	err = crypto_comp_decompress(compr->cc, in_buf, in_len, out_buf,
+				     (unsigned int *)out_len);
+	if (compr->decomp_mutex)
+		mutex_unlock(compr->decomp_mutex);
 	if (err)
-		ubifs_err("cannot decompress %d bytes, compressor %s, "
-			  "error %d", in_len, compr->name, err);
+		ubifs_err("cannot decompress %d bytes, compressor %s, error %d",
+			  in_len, compr->name, err);
 
 	return err;
 }
@@ -127,6 +219,15 @@ static int __init compr_init(struct ubifs_compressor *compr)
 	ubifs_compressors[compr->compr_type]->decompress += gd->reloc_off;
 #endif
 
+	if (compr->capi_name) {
+		compr->cc = crypto_alloc_comp(compr->capi_name, 0, 0);
+		if (IS_ERR(compr->cc)) {
+			ubifs_err("cannot initialize compressor %s, error %ld",
+				  compr->name, PTR_ERR(compr->cc));
+			return PTR_ERR(compr->cc);
+		}
+	}
+
 	return 0;
 }
 
@@ -188,7 +289,9 @@ static int filldir(struct ubifs_info *c, const char *name, int namlen,
 	}
 	ctime_r((time_t *)&inode->i_mtime, filetime);
 	printf("%9lld  %24.24s  ", inode->i_size, filetime);
+#ifndef __UBOOT__
 	ubifs_iput(inode);
+#endif
 
 	printf("%s\n", name);
 
@@ -562,7 +665,7 @@ static int read_block(struct inode *inode, void *addr, unsigned int block,
 dump:
 	ubifs_err("bad data node (block %u, inode %lu)",
 		  block, inode->i_ino);
-	dbg_dump_node(c, dn);
+	ubifs_dump_node(c, dn);
 	return -EINVAL;
 }
 
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 2213201..acc6a40 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -6,18 +6,7 @@
  * (C) Copyright 2008-2009
  * Stefan Roese, DENX Software Engineering, sr at denx.de.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Authors: Artem Bityutskiy (Битюцкий Артём)
  *          Adrian Hunter
@@ -26,12 +15,25 @@
 #ifndef __UBIFS_H__
 #define __UBIFS_H__
 
-#if 0	/* Enable for debugging output */
-#define CONFIG_UBIFS_FS_DEBUG
-#define CONFIG_UBIFS_FS_DEBUG_MSG_LVL	3
-#endif
-
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <asm/div64.h>
+#include <linux/statfs.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/rwsem.h>
+#include <linux/mtd/ubi.h>
+#include <linux/pagemap.h>
+#include <linux/backing-dev.h>
+#include "ubifs-media.h"
+#else
 #include <ubi_uboot.h>
+
 #include <linux/ctype.h>
 #include <linux/time.h>
 #include <linux/math64.h>
@@ -70,13 +72,26 @@ void iput(struct inode *inode);
 #define atomic_long_dec(a)
 #define	atomic_long_sub(a, b)
 
+typedef unsigned long atomic_long_t;
+
 /* linux/include/time.h */
+#define NSEC_PER_SEC	1000000000L
+#define get_seconds()	0
+#define CURRENT_TIME_SEC	((struct timespec) { get_seconds(), 0 })
 
 struct timespec {
 	time_t	tv_sec;		/* seconds */
 	long	tv_nsec;	/* nanoseconds */
 };
 
+static struct timespec current_fs_time(struct super_block *sb)
+{
+	struct timespec now;
+	now.tv_sec = 0;
+	now.tv_nsec = 0;
+	return now;
+};
+
 /* linux/include/dcache.h */
 
 /*
@@ -89,111 +104,245 @@ struct timespec {
 struct qstr {
 	unsigned int hash;
 	unsigned int len;
+#ifndef __UBOOT__
 	const char *name;
+#else
+	char *name;
+#endif
+};
+
+/* include/linux/fs.h */
+
+/* Possible states of 'frozen' field */
+enum {
+	SB_UNFROZEN = 0,		/* FS is unfrozen */
+	SB_FREEZE_WRITE	= 1,		/* Writes, dir ops, ioctls frozen */
+	SB_FREEZE_PAGEFAULT = 2,	/* Page faults stopped as well */
+	SB_FREEZE_FS = 3,		/* For internal FS use (e.g. to stop
+					 * internal threads if needed) */
+	SB_FREEZE_COMPLETE = 4,		/* ->freeze_fs finished successfully */
 };
 
+#define SB_FREEZE_LEVELS (SB_FREEZE_COMPLETE - 1)
+
+struct sb_writers {
+#ifndef __UBOOT__
+	/* Counters for counting writers at each level */
+	struct percpu_counter	counter[SB_FREEZE_LEVELS];
+#endif
+	wait_queue_head_t	wait;		/* queue for waiting for
+						   writers / faults to finish */
+	int			frozen;		/* Is sb frozen? */
+	wait_queue_head_t	wait_unfrozen;	/* queue for waiting for
+						   sb to be thawed */
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	lock_map[SB_FREEZE_LEVELS];
+#endif
+};
+
+struct address_space {
+	struct inode		*host;		/* owner: inode, block_device */
+#ifndef __UBOOT__
+	struct radix_tree_root	page_tree;	/* radix tree of all pages */
+#endif
+	spinlock_t		tree_lock;	/* and lock protecting it */
+	unsigned int		i_mmap_writable;/* count VM_SHARED mappings */
+	struct rb_root		i_mmap;		/* tree of private and shared mappings */
+	struct list_head	i_mmap_nonlinear;/*list VM_NONLINEAR mappings */
+	struct mutex		i_mmap_mutex;	/* protect tree, count, list */
+	/* Protected by tree_lock together with the radix tree */
+	unsigned long		nrpages;	/* number of total pages */
+	pgoff_t			writeback_index;/* writeback starts here */
+	const struct address_space_operations *a_ops;	/* methods */
+	unsigned long		flags;		/* error bits/gfp mask */
+#ifndef __UBOOT__
+	struct backing_dev_info *backing_dev_info; /* device readahead, etc */
+#endif
+	spinlock_t		private_lock;	/* for use by the address_space */
+	struct list_head	private_list;	/* ditto */
+	void			*private_data;	/* ditto */
+} __attribute__((aligned(sizeof(long))));
+
+/*
+ * Keep mostly read-only and often accessed (especially for
+ * the RCU path lookup and 'stat' data) fields at the beginning
+ * of the 'struct inode'
+ */
 struct inode {
-	struct hlist_node	i_hash;
-	struct list_head	i_list;
-	struct list_head	i_sb_list;
-	struct list_head	i_dentry;
+	umode_t			i_mode;
+	unsigned short		i_opflags;
+	kuid_t			i_uid;
+	kgid_t			i_gid;
+	unsigned int		i_flags;
+
+#ifdef CONFIG_FS_POSIX_ACL
+	struct posix_acl	*i_acl;
+	struct posix_acl	*i_default_acl;
+#endif
+
+	const struct inode_operations	*i_op;
+	struct super_block	*i_sb;
+	struct address_space	*i_mapping;
+
+#ifdef CONFIG_SECURITY
+	void			*i_security;
+#endif
+
+	/* Stat data, not accessed from path walking */
 	unsigned long		i_ino;
-	unsigned int		i_nlink;
-	uid_t			i_uid;
-	gid_t			i_gid;
+	/*
+	 * Filesystems may only read i_nlink directly.  They shall use the
+	 * following functions for modification:
+	 *
+	 *    (set|clear|inc|drop)_nlink
+	 *    inode_(inc|dec)_link_count
+	 */
+	union {
+		const unsigned int i_nlink;
+		unsigned int __i_nlink;
+	};
 	dev_t			i_rdev;
-	u64			i_version;
 	loff_t			i_size;
-#ifdef __NEED_I_SIZE_ORDERED
-	seqcount_t		i_size_seqcount;
-#endif
 	struct timespec		i_atime;
 	struct timespec		i_mtime;
 	struct timespec		i_ctime;
-	unsigned int		i_blkbits;
-	unsigned short          i_bytes;
-	umode_t			i_mode;
 	spinlock_t		i_lock;	/* i_blocks, i_bytes, maybe i_size */
+	unsigned short          i_bytes;
+	unsigned int		i_blkbits;
+	blkcnt_t		i_blocks;
+
+#ifdef __NEED_I_SIZE_ORDERED
+	seqcount_t		i_size_seqcount;
+#endif
+
+	/* Misc */
+	unsigned long		i_state;
 	struct mutex		i_mutex;
-	struct rw_semaphore	i_alloc_sem;
-	const struct inode_operations	*i_op;
+
+	unsigned long		dirtied_when;	/* jiffies of first dirtying */
+
+	struct hlist_node	i_hash;
+	struct list_head	i_wb_list;	/* backing dev IO list */
+	struct list_head	i_lru;		/* inode LRU list */
+	struct list_head	i_sb_list;
+	union {
+		struct hlist_head	i_dentry;
+		struct rcu_head		i_rcu;
+	};
+	u64			i_version;
+	atomic_t		i_count;
+	atomic_t		i_dio_count;
+	atomic_t		i_writecount;
 	const struct file_operations	*i_fop;	/* former ->i_op->default_file_ops */
-	struct super_block	*i_sb;
 	struct file_lock	*i_flock;
+	struct address_space	i_data;
 #ifdef CONFIG_QUOTA
 	struct dquot		*i_dquot[MAXQUOTAS];
 #endif
 	struct list_head	i_devices;
-	int			i_cindex;
+	union {
+		struct pipe_inode_info	*i_pipe;
+		struct block_device	*i_bdev;
+		struct cdev		*i_cdev;
+	};
 
 	__u32			i_generation;
 
-#ifdef CONFIG_DNOTIFY
-	unsigned long		i_dnotify_mask; /* Directory notify events */
-	struct dnotify_struct	*i_dnotify; /* for directory notifications */
+#ifdef CONFIG_FSNOTIFY
+	__u32			i_fsnotify_mask; /* all events this inode cares about */
+	struct hlist_head	i_fsnotify_marks;
 #endif
 
-#ifdef CONFIG_INOTIFY
-	struct list_head	inotify_watches; /* watches on this inode */
-	struct mutex		inotify_mutex;	/* protects the watches list */
+#ifdef CONFIG_IMA
+	atomic_t		i_readcount; /* struct files open RO */
 #endif
+	void			*i_private; /* fs or device private pointer */
+};
 
-	unsigned long		i_state;
-	unsigned long		dirtied_when;	/* jiffies of first dirtying */
-
-	unsigned int		i_flags;
-
-#ifdef CONFIG_SECURITY
-	void			*i_security;
+struct super_operations {
+   	struct inode *(*alloc_inode)(struct super_block *sb);
+	void (*destroy_inode)(struct inode *);
+
+   	void (*dirty_inode) (struct inode *, int flags);
+	int (*write_inode) (struct inode *, struct writeback_control *wbc);
+	int (*drop_inode) (struct inode *);
+	void (*evict_inode) (struct inode *);
+	void (*put_super) (struct super_block *);
+	int (*sync_fs)(struct super_block *sb, int wait);
+	int (*freeze_fs) (struct super_block *);
+	int (*unfreeze_fs) (struct super_block *);
+#ifndef __UBOOT__
+	int (*statfs) (struct dentry *, struct kstatfs *);
 #endif
-	void			*i_private; /* fs or device private pointer */
+	int (*remount_fs) (struct super_block *, int *, char *);
+	void (*umount_begin) (struct super_block *);
+
+#ifndef __UBOOT__
+	int (*show_options)(struct seq_file *, struct dentry *);
+	int (*show_devname)(struct seq_file *, struct dentry *);
+	int (*show_path)(struct seq_file *, struct dentry *);
+	int (*show_stats)(struct seq_file *, struct dentry *);
+#endif
+#ifdef CONFIG_QUOTA
+	ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
+	ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
+#endif
+	int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t);
+	long (*nr_cached_objects)(struct super_block *, int);
+	long (*free_cached_objects)(struct super_block *, long, int);
 };
 
 struct super_block {
 	struct list_head	s_list;		/* Keep this first */
 	dev_t			s_dev;		/* search index; _not_ kdev_t */
-	unsigned long		s_blocksize;
 	unsigned char		s_blocksize_bits;
-	unsigned char		s_dirt;
-	unsigned long long	s_maxbytes;	/* Max file size */
+	unsigned long		s_blocksize;
+	loff_t			s_maxbytes;	/* Max file size */
 	struct file_system_type	*s_type;
 	const struct super_operations	*s_op;
-	struct dquot_operations	*dq_op;
-	struct quotactl_ops	*s_qcop;
+	const struct dquot_operations	*dq_op;
+	const struct quotactl_ops	*s_qcop;
 	const struct export_operations *s_export_op;
 	unsigned long		s_flags;
 	unsigned long		s_magic;
 	struct dentry		*s_root;
 	struct rw_semaphore	s_umount;
-	struct mutex		s_lock;
 	int			s_count;
-	int			s_syncing;
-	int			s_need_sync_fs;
+	atomic_t		s_active;
 #ifdef CONFIG_SECURITY
 	void                    *s_security;
 #endif
-	struct xattr_handler	**s_xattr;
+	const struct xattr_handler **s_xattr;
 
 	struct list_head	s_inodes;	/* all inodes */
-	struct list_head	s_dirty;	/* dirty inodes */
-	struct list_head	s_io;		/* parked for writeback */
-	struct list_head	s_more_io;	/* parked for more writeback */
-	struct hlist_head	s_anon;		/* anonymous dentries for (nfs) exporting */
-	struct list_head	s_files;
-	/* s_dentry_lru and s_nr_dentry_unused are protected by dcache_lock */
-	struct list_head	s_dentry_lru;	/* unused dentry lru */
-	int			s_nr_dentry_unused;	/* # of dentry on lru */
-
+#ifndef __UBOOT__
+	struct hlist_bl_head	s_anon;		/* anonymous dentries for (nfs) exporting */
+#endif
+	struct list_head	s_mounts;	/* list of mounts; _not_ for fs use */
 	struct block_device	*s_bdev;
+#ifndef __UBOOT__
+	struct backing_dev_info *s_bdi;
+#endif
 	struct mtd_info		*s_mtd;
-	struct list_head	s_instances;
+	struct hlist_node	s_instances;
+#ifndef __UBOOT__
+	struct quota_info	s_dquot;	/* Diskquota specific options */
+#endif
 
-	int			s_frozen;
-	wait_queue_head_t	s_wait_unfrozen;
+	struct sb_writers	s_writers;
 
 	char s_id[32];				/* Informational name */
+	u8 s_uuid[16];				/* UUID */
 
 	void 			*s_fs_info;	/* Filesystem private info */
+	unsigned int		s_max_links;
+#ifndef __UBOOT__
+	fmode_t			s_mode;
+#endif
+
+	/* Granularity of c/m/atime in ns.
+	   Cannot be worse than a second */
+	u32		   s_time_gran;
 
 	/*
 	 * The next field is for VFS *only*. No filesystems have any business
@@ -201,66 +350,83 @@ struct super_block {
 	 */
 	struct mutex s_vfs_rename_mutex;	/* Kludge */
 
-	/* Granularity of c/m/atime in ns.
-	   Cannot be worse than a second */
-	u32		   s_time_gran;
-
 	/*
 	 * Filesystem subtype.  If non-empty the filesystem type field
 	 * in /proc/mounts will be "type.subtype"
 	 */
 	char *s_subtype;
 
+#ifndef __UBOOT__
 	/*
 	 * Saved mount options for lazy filesystems using
 	 * generic_show_options()
 	 */
-	char *s_options;
+	char __rcu *s_options;
+#endif
+	const struct dentry_operations *s_d_op; /* default d_op for dentries */
+
+	/*
+	 * Saved pool identifier for cleancache (-1 means none)
+	 */
+	int cleancache_poolid;
+
+#ifndef __UBOOT__
+	struct shrinker s_shrink;	/* per-sb shrinker handle */
+#endif
+
+	/* Number of inodes with nlink == 0 but still referenced */
+	atomic_long_t s_remove_count;
+
+	/* Being remounted read-only */
+	int s_readonly_remount;
+
+	/* AIO completions deferred from interrupt context */
+	struct workqueue_struct *s_dio_done_wq;
+
+#ifndef __UBOOT__
+	/*
+	 * Keep the lru lists last in the structure so they always sit on their
+	 * own individual cachelines.
+	 */
+	struct list_lru		s_dentry_lru ____cacheline_aligned_in_smp;
+	struct list_lru		s_inode_lru ____cacheline_aligned_in_smp;
+#endif
+	struct rcu_head		rcu;
 };
 
 struct file_system_type {
 	const char *name;
 	int fs_flags;
-	int (*get_sb) (struct file_system_type *, int,
-		       const char *, void *, struct vfsmount *);
+#define FS_REQUIRES_DEV		1 
+#define FS_BINARY_MOUNTDATA	2
+#define FS_HAS_SUBTYPE		4
+#define FS_USERNS_MOUNT		8	/* Can be mounted by userns root */
+#define FS_USERNS_DEV_MOUNT	16 /* A userns mount does not imply MNT_NODEV */
+#define FS_RENAME_DOES_D_MOVE	32768	/* FS will handle d_move() during rename() internally. */
+	struct dentry *(*mount) (struct file_system_type *, int,
+		       const char *, void *);
 	void (*kill_sb) (struct super_block *);
 	struct module *owner;
 	struct file_system_type * next;
-	struct list_head fs_supers;
+	struct hlist_head fs_supers;
+
+#ifndef __UBOOT__
+	struct lock_class_key s_lock_key;
+	struct lock_class_key s_umount_key;
+	struct lock_class_key s_vfs_rename_key;
+	struct lock_class_key s_writers_key[SB_FREEZE_LEVELS];
+
+	struct lock_class_key i_lock_key;
+	struct lock_class_key i_mutex_key;
+	struct lock_class_key i_mutex_dir_key;
+#endif
 };
 
+/* include/linux/mount.h */
 struct vfsmount {
-	struct list_head mnt_hash;
-	struct vfsmount *mnt_parent;	/* fs we are mounted on */
-	struct dentry *mnt_mountpoint;	/* dentry of mountpoint */
 	struct dentry *mnt_root;	/* root of the mounted tree */
 	struct super_block *mnt_sb;	/* pointer to superblock */
-	struct list_head mnt_mounts;	/* list of children, anchored here */
-	struct list_head mnt_child;	/* and going through their mnt_child */
 	int mnt_flags;
-	/* 4 bytes hole on 64bits arches */
-	const char *mnt_devname;	/* Name of device e.g. /dev/dsk/hda1 */
-	struct list_head mnt_list;
-	struct list_head mnt_expire;	/* link in fs-specific expiry list */
-	struct list_head mnt_share;	/* circular list of shared mounts */
-	struct list_head mnt_slave_list;/* list of slave mounts */
-	struct list_head mnt_slave;	/* slave list entry */
-	struct vfsmount *mnt_master;	/* slave is on master->mnt_slave_list */
-	struct mnt_namespace *mnt_ns;	/* containing namespace */
-	int mnt_id;			/* mount identifier */
-	int mnt_group_id;		/* peer group identifier */
-	/*
-	 * We put mnt_count & mnt_expiry_mark at the end of struct vfsmount
-	 * to let these frequently modified fields in a separate cache line
-	 * (so that reads of mnt_flags wont ping-pong on SMP machines)
-	 */
-	int mnt_expiry_mark;		/* true if marked for expiry */
-	int mnt_pinned;
-	int mnt_ghosts;
-	/*
-	 * This value is not stable unless all of the mnt_writers[] spinlocks
-	 * are held, and all mnt_writer[]s on this mount have 0 as their ->count
-	 */
 };
 
 struct path {
@@ -451,32 +617,35 @@ static inline ino_t parent_ino(struct dentry *dentry)
 
 /* debug.c */
 
-#define DEFINE_SPINLOCK(...)
 #define module_param_named(...)
 
 /* misc.h */
 #define mutex_lock_nested(...)
 #define mutex_unlock_nested(...)
 #define mutex_is_locked(...)	0
+#endif
 
 /* Version of this UBIFS implementation */
 #define UBIFS_VERSION 1
 
 /* Normal UBIFS messages */
-#ifdef CONFIG_UBIFS_SILENCE_MSG
-#define ubifs_msg(fmt, ...)
-#else
-#define ubifs_msg(fmt, ...) \
-		printk(KERN_NOTICE "UBIFS: " fmt "\n", ##__VA_ARGS__)
-#endif
+#define ubifs_msg(fmt, ...) pr_notice("UBIFS: " fmt "\n", ##__VA_ARGS__)
 /* UBIFS error messages */
-#define ubifs_err(fmt, ...)                                                  \
-	printk(KERN_ERR "UBIFS error (pid %d): %s: " fmt "\n", 0, \
+#ifndef __UBOOT__
+#define ubifs_err(fmt, ...)                                         \
+	pr_err("UBIFS error (pid %d): %s: " fmt "\n", current->pid, \
 	       __func__, ##__VA_ARGS__)
 /* UBIFS warning messages */
-#define ubifs_warn(fmt, ...)                                         \
-	printk(KERN_WARNING "UBIFS warning (pid %d): %s: " fmt "\n", \
-	       0, __func__, ##__VA_ARGS__)
+#define ubifs_warn(fmt, ...)                                        \
+	pr_warn("UBIFS warning (pid %d): %s: " fmt "\n",            \
+		current->pid, __func__, ##__VA_ARGS__)
+#else
+#define ubifs_err(fmt, ...)                                         \
+	pr_err("UBIFS error: %s: " fmt "\n", __func__, ##__VA_ARGS__)
+/* UBIFS warning messages */
+#define ubifs_warn(fmt, ...)                                        \
+	pr_warn("UBIFS warning: %s: " fmt "\n", __func__, ##__VA_ARGS__)
+#endif
 
 /* UBIFS file system VFS magic number */
 #define UBIFS_SUPER_MAGIC 0x24051905
@@ -509,9 +678,6 @@ static inline ino_t parent_ino(struct dentry *dentry)
 #define INUM_WARN_WATERMARK 0xFFF00000
 #define INUM_WATERMARK      0xFFFFFF00
 
-/* Largest key size supported in this implementation */
-#define CUR_MAX_KEY_LEN UBIFS_SK_LEN
-
 /* Maximum number of entries in each LPT (LEB category) heap */
 #define LPT_HEAP_SZ 256
 
@@ -521,8 +687,9 @@ static inline ino_t parent_ino(struct dentry *dentry)
  */
 #define BGT_NAME_PATTERN "ubifs_bgt%d_%d"
 
-/* Default write-buffer synchronization timeout (5 secs) */
-#define DEFAULT_WBUF_TIMEOUT (5 * HZ)
+/* Write-buffer synchronization timeout interval in seconds */
+#define WBUF_TIMEOUT_SOFTLIMIT 3
+#define WBUF_TIMEOUT_HARDLIMIT 5
 
 /* Maximum possible inode number (only 32-bit inodes are supported now) */
 #define MAX_INUM 0xFFFFFFFF
@@ -530,12 +697,10 @@ static inline ino_t parent_ino(struct dentry *dentry)
 /* Number of non-data journal heads */
 #define NONDATA_JHEADS_CNT 2
 
-/* Garbage collector head */
-#define GCHD   0
-/* Base journal head number */
-#define BASEHD 1
-/* First "general purpose" journal head */
-#define DATAHD 2
+/* Shorter names for journal head numbers for internal usage */
+#define GCHD   UBIFS_GC_HEAD
+#define BASEHD UBIFS_BASE_HEAD
+#define DATAHD UBIFS_DATA_HEAD
 
 /* 'No change' value for 'ubifs_change_lp()' */
 #define LPROPS_NC 0x80000001
@@ -545,8 +710,12 @@ static inline ino_t parent_ino(struct dentry *dentry)
  * in TNC. However, when replaying, it is handy to introduce fake "truncation"
  * keys for truncation nodes because the code becomes simpler. So we define
  * %UBIFS_TRUN_KEY type.
+ *
+ * But otherwise, out of the journal reply scope, the truncation keys are
+ * invalid.
  */
-#define UBIFS_TRUN_KEY UBIFS_KEY_TYPES_CNT
+#define UBIFS_TRUN_KEY    UBIFS_KEY_TYPES_CNT
+#define UBIFS_INVALID_KEY UBIFS_KEY_TYPES_CNT
 
 /*
  * How much a directory entry/extended attribute entry adds to the parent/host
@@ -573,6 +742,12 @@ static inline ino_t parent_ino(struct dentry *dentry)
  */
 #define WORST_COMPR_FACTOR 2
 
+/*
+ * How much memory is needed for a buffer where we comress a data node.
+ */
+#define COMPRESSED_DATA_NODE_BUF_SZ \
+	(UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE * WORST_COMPR_FACTOR)
+
 /* Maximum expected tree height for use by bottom_up_buf */
 #define BOTTOM_UP_HEIGHT 64
 
@@ -646,14 +821,14 @@ enum {
  * LPT cnode flag bits.
  *
  * DIRTY_CNODE: cnode is dirty
- * COW_CNODE: cnode is being committed and must be copied before writing
  * OBSOLETE_CNODE: cnode is being committed and has been copied (or deleted),
- * so it can (and must) be freed when the commit is finished
+ *                 so it can (and must) be freed when the commit is finished
+ * COW_CNODE: cnode is being committed and must be copied before writing
  */
 enum {
 	DIRTY_CNODE    = 0,
-	COW_CNODE      = 1,
-	OBSOLETE_CNODE = 2,
+	OBSOLETE_CNODE = 1,
+	COW_CNODE      = 2,
 };
 
 /*
@@ -693,10 +868,10 @@ struct ubifs_old_idx {
 
 /* The below union makes it easier to deal with keys */
 union ubifs_key {
-	uint8_t u8[CUR_MAX_KEY_LEN];
-	uint32_t u32[CUR_MAX_KEY_LEN/4];
-	uint64_t u64[CUR_MAX_KEY_LEN/8];
-	__le32 j32[CUR_MAX_KEY_LEN/4];
+	uint8_t u8[UBIFS_SK_LEN];
+	uint32_t u32[UBIFS_SK_LEN/4];
+	uint64_t u64[UBIFS_SK_LEN/8];
+	__le32 j32[UBIFS_SK_LEN/4];
 };
 
 /**
@@ -805,9 +980,9 @@ struct ubifs_gced_idx_leb {
  * The @ui_size is a "shadow" variable for @inode->i_size and UBIFS uses
  * @ui_size instead of @inode->i_size. The reason for this is that UBIFS cannot
  * make sure @inode->i_size is always changed under @ui_mutex, because it
- * cannot call 'vmtruncate()' with @ui_mutex locked, because it would deadlock
- * with 'ubifs_writepage()' (see file.c). All the other inode fields are
- * changed under @ui_mutex, so they do not need "shadow" fields. Note, one
+ * cannot call 'truncate_setsize()' with @ui_mutex locked, because it would
+ * deadlock with 'ubifs_writepage()' (see file.c). All the other inode fields
+ * are changed under @ui_mutex, so they do not need "shadow" fields. Note, one
  * could consider to rework locking and base it on "shadow" fields.
  */
 struct ubifs_inode {
@@ -1068,17 +1243,19 @@ typedef int (*ubifs_lpt_scan_callback)(struct ubifs_info *c,
  * @offs: write-buffer offset in this logical eraseblock
  * @avail: number of bytes available in the write-buffer
  * @used:  number of used bytes in the write-buffer
- * @dtype: type of data stored in this LEB (%UBI_LONGTERM, %UBI_SHORTTERM,
- * %UBI_UNKNOWN)
+ * @size: write-buffer size (in [@c->min_io_size, @c->max_write_size] range)
  * @jhead: journal head the mutex belongs to (note, needed only to shut lockdep
  *         up by 'mutex_lock_nested()).
  * @sync_callback: write-buffer synchronization callback
  * @io_mutex: serializes write-buffer I/O
  * @lock: serializes @buf, @lnum, @offs, @avail, @used, @next_ino and @inodes
  *        fields
+ * @softlimit: soft write-buffer timeout interval
+ * @delta: hard and soft timeouts delta (the timer expire inteval is @softlimit
+ *         and @softlimit + @delta)
  * @timer: write-buffer timer
- * @timeout: timer expire interval in jiffies
- * @need_sync: it is set if its timer expired and needs sync
+ * @no_timer: non-zero if this write-buffer does not have a timer
+ * @need_sync: non-zero if the timer expired and the wbuf needs sync'ing
  * @next_ino: points to the next position of the following inode number
  * @inodes: stores the inode numbers of the nodes which are in wbuf
  *
@@ -1099,13 +1276,16 @@ struct ubifs_wbuf {
 	int offs;
 	int avail;
 	int used;
-	int dtype;
+	int size;
 	int jhead;
 	int (*sync_callback)(struct ubifs_info *c, int lnum, int free, int pad);
 	struct mutex io_mutex;
 	spinlock_t lock;
-	int timeout;
-	int need_sync;
+//	ktime_t softlimit;
+//	unsigned long long delta;
+//	struct hrtimer timer;
+	unsigned int no_timer:1;
+	unsigned int need_sync:1;
 	int next_ino;
 	ino_t *inodes;
 };
@@ -1130,12 +1310,14 @@ struct ubifs_bud {
  * struct ubifs_jhead - journal head.
  * @wbuf: head's write-buffer
  * @buds_list: list of bud LEBs belonging to this journal head
+ * @grouped: non-zero if UBIFS groups nodes when writing to this journal head
  *
  * Note, the @buds list is protected by the @c->buds_lock.
  */
 struct ubifs_jhead {
 	struct ubifs_wbuf wbuf;
 	struct list_head buds_list;
+	unsigned int grouped:1;
 };
 
 /**
@@ -1171,6 +1353,9 @@ struct ubifs_zbranch {
  * @offs: offset of the corresponding indexing node
  * @len: length  of the corresponding indexing node
  * @zbranch: array of znode branches (@c->fanout elements)
+ *
+ * Note! The @lnum, @offs, and @len fields are not really needed - we have them
+ * only for internal consistency check. They could be removed to save some RAM.
  */
 struct ubifs_znode {
 	struct ubifs_znode *parent;
@@ -1181,9 +1366,9 @@ struct ubifs_znode {
 	int child_cnt;
 	int iip;
 	int alt;
-#ifdef CONFIG_UBIFS_FS_DEBUG
-	int lnum, offs, len;
-#endif
+	int lnum;
+	int offs;
+	int len;
 	struct ubifs_zbranch zbranch[];
 };
 
@@ -1236,10 +1421,15 @@ struct ubifs_node_range {
  */
 struct ubifs_compressor {
 	int compr_type;
-	char *name;
-	char *capi_name;
+	struct crypto_comp *cc;
+	struct mutex *comp_mutex;
+	struct mutex *decomp_mutex;
+	const char *name;
+	const char *capi_name;
+#ifdef __UBOOT__
 	int (*decompress)(const unsigned char *in, size_t in_len,
 			  unsigned char *out, size_t *out_len);
+#endif
 };
 
 /**
@@ -1313,6 +1503,8 @@ struct ubifs_budget_req {
  * @dnext: next orphan to delete
  * @inum: inode number
  * @new: %1 => added since the last commit, otherwise %0
+ * @cmt: %1 => commit pending, otherwise %0
+ * @del: %1 => delete pending, otherwise %0
  */
 struct ubifs_orphan {
 	struct rb_node rb;
@@ -1321,7 +1513,9 @@ struct ubifs_orphan {
 	struct ubifs_orphan *cnext;
 	struct ubifs_orphan *dnext;
 	ino_t inum;
-	int new;
+	unsigned new:1;
+	unsigned cmt:1;
+	unsigned del:1;
 };
 
 /**
@@ -1344,6 +1538,40 @@ struct ubifs_mount_opts {
 	unsigned int compr_type:2;
 };
 
+/**
+ * struct ubifs_budg_info - UBIFS budgeting information.
+ * @idx_growth: amount of bytes budgeted for index growth
+ * @data_growth: amount of bytes budgeted for cached data
+ * @dd_growth: amount of bytes budgeted for cached data that will make
+ *             other data dirty
+ * @uncommitted_idx: amount of bytes were budgeted for growth of the index, but
+ *                   which still have to be taken into account because the index
+ *                   has not been committed so far
+ * @old_idx_sz: size of index on flash
+ * @min_idx_lebs: minimum number of LEBs required for the index
+ * @nospace: non-zero if the file-system does not have flash space (used as
+ *           optimization)
+ * @nospace_rp: the same as @nospace, but additionally means that even reserved
+ *              pool is full
+ * @page_budget: budget for a page (constant, nenver changed after mount)
+ * @inode_budget: budget for an inode (constant, nenver changed after mount)
+ * @dent_budget: budget for a directory entry (constant, nenver changed after
+ *               mount)
+ */
+struct ubifs_budg_info {
+	long long idx_growth;
+	long long data_growth;
+	long long dd_growth;
+	long long uncommitted_idx;
+	unsigned long long old_idx_sz;
+	int min_idx_lebs;
+	unsigned int nospace:1;
+	unsigned int nospace_rp:1;
+	int page_budget;
+	int inode_budget;
+	int dent_budget;
+};
+
 struct ubifs_debug_info;
 
 /**
@@ -1387,6 +1615,7 @@ struct ubifs_debug_info;
  * @cmt_wq: wait queue to sleep on if the log is full and a commit is running
  *
  * @big_lpt: flag that LPT is too big to write whole during commit
+ * @space_fixup: flag indicating that free space in LEBs needs to be cleaned up
  * @no_chk_data_crc: do not check CRCs when reading data nodes (except during
  *                   recovery)
  * @bulk_read: enable bulk-reads
@@ -1418,6 +1647,11 @@ struct ubifs_debug_info;
  * @bu_mutex: protects the pre-allocated bulk-read buffer and @c->bu
  * @bu: pre-allocated bulk-read information
  *
+ * @write_reserve_mutex: protects @write_reserve_buf
+ * @write_reserve_buf: on the write path we allocate memory, which might
+ *                     sometimes be unavailable, in which case we use this
+ *                     write reserve buffer
+ *
  * @log_lebs: number of logical eraseblocks in the log
  * @log_bytes: log size in bytes
  * @log_last: last LEB of the log
@@ -1439,43 +1673,34 @@ struct ubifs_debug_info;
  *
  * @min_io_size: minimal input/output unit size
  * @min_io_shift: number of bits in @min_io_size minus one
+ * @max_write_size: maximum amount of bytes the underlying flash can write at a
+ *                  time (MTD write buffer size)
+ * @max_write_shift: number of bits in @max_write_size minus one
  * @leb_size: logical eraseblock size in bytes
+ * @leb_start: starting offset of logical eraseblocks within physical
+ *             eraseblocks
  * @half_leb_size: half LEB size
+ * @idx_leb_size: how many bytes of an LEB are effectively available when it is
+ *                used to store indexing nodes (@leb_size - @max_idx_node_sz)
  * @leb_cnt: count of logical eraseblocks
  * @max_leb_cnt: maximum count of logical eraseblocks
  * @old_leb_cnt: count of logical eraseblocks before re-size
  * @ro_media: the underlying UBI volume is read-only
+ * @ro_mount: the file-system was mounted as read-only
+ * @ro_error: UBIFS switched to R/O mode because an error happened
  *
  * @dirty_pg_cnt: number of dirty pages (not used)
  * @dirty_zn_cnt: number of dirty znodes
  * @clean_zn_cnt: number of clean znodes
  *
- * @budg_idx_growth: amount of bytes budgeted for index growth
- * @budg_data_growth: amount of bytes budgeted for cached data
- * @budg_dd_growth: amount of bytes budgeted for cached data that will make
- *                  other data dirty
- * @budg_uncommitted_idx: amount of bytes were budgeted for growth of the index,
- *                        but which still have to be taken into account because
- *                        the index has not been committed so far
- * @space_lock: protects @budg_idx_growth, @budg_data_growth, @budg_dd_growth,
- *              @budg_uncommited_idx, @min_idx_lebs, @old_idx_sz, @lst,
- *              @nospace, and @nospace_rp;
- * @min_idx_lebs: minimum number of LEBs required for the index
- * @old_idx_sz: size of index on flash
+ * @space_lock: protects @bi and @lst
+ * @lst: lprops statistics
+ * @bi: budgeting information
  * @calc_idx_sz: temporary variable which is used to calculate new index size
  *               (contains accurate new index size at end of TNC commit start)
- * @lst: lprops statistics
- * @nospace: non-zero if the file-system does not have flash space (used as
- *           optimization)
- * @nospace_rp: the same as @nospace, but additionally means that even reserved
- *              pool is full
- *
- * @page_budget: budget for a page
- * @inode_budget: budget for an inode
- * @dent_budget: budget for a directory entry
  *
  * @ref_node_alsz: size of the LEB reference node aligned to the min. flash
- * I/O unit
+ *                 I/O unit
  * @mst_node_alsz: master node aligned size
  * @min_idx_node_sz: minimum indexing node aligned on 8-bytes boundary
  * @max_idx_node_sz: maximum indexing node aligned on 8-bytes boundary
@@ -1558,9 +1783,11 @@ struct ubifs_debug_info;
  *             previous commit start
  * @uncat_list: list of un-categorized LEBs
  * @empty_list: list of empty LEBs
- * @freeable_list: list of freeable non-index LEBs (free + dirty == leb_size)
- * @frdi_idx_list: list of freeable index LEBs (free + dirty == leb_size)
+ * @freeable_list: list of freeable non-index LEBs (free + dirty == @leb_size)
+ * @frdi_idx_list: list of freeable index LEBs (free + dirty == @leb_size)
  * @freeable_cnt: number of freeable LEBs in @freeable_list
+ * @in_a_category_cnt: count of lprops which are in a certain category, which
+ *                     basically meants that they were loaded from the flash
  *
  * @ltab_lnum: LEB number of LPT's own lprops table
  * @ltab_offs: offset of LPT's own lprops table
@@ -1577,25 +1804,29 @@ struct ubifs_debug_info;
  * @rp_uid: reserved pool user ID
  * @rp_gid: reserved pool group ID
  *
- * @empty: if the UBI device is empty
- * @replay_tree: temporary tree used during journal replay
+ * @empty: %1 if the UBI device is empty
+ * @need_recovery: %1 if the file-system needs recovery
+ * @replaying: %1 during journal replay
+ * @mounting: %1 while mounting
+ * @remounting_rw: %1 while re-mounting from R/O mode to R/W mode
  * @replay_list: temporary list used during journal replay
  * @replay_buds: list of buds to replay
  * @cs_sqnum: sequence number of first node in the log (commit start node)
  * @replay_sqnum: sequence number of node currently being replayed
- * @need_recovery: file-system needs recovery
- * @replaying: set to %1 during journal replay
- * @unclean_leb_list: LEBs to recover when mounting ro to rw
- * @rcvrd_mst_node: recovered master node to write when mounting ro to rw
+ * @unclean_leb_list: LEBs to recover when re-mounting R/O mounted FS to R/W
+ *                    mode
+ * @rcvrd_mst_node: recovered master node to write when re-mounting R/O mounted
+ *                  FS to R/W mode
  * @size_tree: inode size information for recovery
- * @remounting_rw: set while remounting from ro to rw (sb flags have MS_RDONLY)
- * @always_chk_crc: always check CRCs (while mounting and remounting rw)
  * @mount_opts: UBIFS-specific mount options
  *
  * @dbg: debugging-related information
  */
 struct ubifs_info {
 	struct super_block *vfs_sb;
+#ifndef __UBOOT__
+	struct backing_dev_info bdi;
+#endif
 
 	ino_t highest_inum;
 	unsigned long long max_sqnum;
@@ -1628,6 +1859,7 @@ struct ubifs_info {
 	wait_queue_head_t cmt_wq;
 
 	unsigned int big_lpt:1;
+	unsigned int space_fixup:1;
 	unsigned int no_chk_data_crc:1;
 	unsigned int bulk_read:1;
 	unsigned int default_compr:2;
@@ -1657,6 +1889,9 @@ struct ubifs_info {
 	struct mutex bu_mutex;
 	struct bu_info bu;
 
+	struct mutex write_reserve_mutex;
+	void *write_reserve_buf;
+
 	int log_lebs;
 	long long log_bytes;
 	int log_last;
@@ -1678,28 +1913,27 @@ struct ubifs_info {
 
 	int min_io_size;
 	int min_io_shift;
+	int max_write_size;
+	int max_write_shift;
 	int leb_size;
+	int leb_start;
 	int half_leb_size;
+	int idx_leb_size;
 	int leb_cnt;
 	int max_leb_cnt;
 	int old_leb_cnt;
-	int ro_media;
+	unsigned int ro_media:1;
+	unsigned int ro_mount:1;
+	unsigned int ro_error:1;
+
+	atomic_long_t dirty_pg_cnt;
+	atomic_long_t dirty_zn_cnt;
+	atomic_long_t clean_zn_cnt;
 
-	long long budg_idx_growth;
-	long long budg_data_growth;
-	long long budg_dd_growth;
-	long long budg_uncommitted_idx;
 	spinlock_t space_lock;
-	int min_idx_lebs;
-	unsigned long long old_idx_sz;
-	unsigned long long calc_idx_sz;
 	struct ubifs_lp_stats lst;
-	unsigned int nospace:1;
-	unsigned int nospace_rp:1;
-
-	int page_budget;
-	int inode_budget;
-	int dent_budget;
+	struct ubifs_budg_info bi;
+	unsigned long long calc_idx_sz;
 
 	int ref_node_alsz;
 	int mst_node_alsz;
@@ -1785,6 +2019,7 @@ struct ubifs_info {
 	struct list_head freeable_list;
 	struct list_head frdi_idx_list;
 	int freeable_cnt;
+	int in_a_category_cnt;
 
 	int ltab_lnum;
 	int ltab_offs;
@@ -1798,31 +2033,32 @@ struct ubifs_info {
 
 	long long rp_size;
 	long long report_rp_size;
-	uid_t rp_uid;
-	gid_t rp_gid;
+	kuid_t rp_uid;
+	kgid_t rp_gid;
 
 	/* The below fields are used only during mounting and re-mounting */
-	int empty;
-	struct rb_root replay_tree;
+	unsigned int empty:1;
+	unsigned int need_recovery:1;
+	unsigned int replaying:1;
+	unsigned int mounting:1;
+	unsigned int remounting_rw:1;
 	struct list_head replay_list;
 	struct list_head replay_buds;
 	unsigned long long cs_sqnum;
 	unsigned long long replay_sqnum;
-	int need_recovery;
-	int replaying;
 	struct list_head unclean_leb_list;
 	struct ubifs_mst_node *rcvrd_mst_node;
 	struct rb_root size_tree;
-	int remounting_rw;
-	int always_chk_crc;
 	struct ubifs_mount_opts mount_opts;
 
-#ifdef CONFIG_UBIFS_FS_DEBUG
+#ifndef __UBOOT__
 	struct ubifs_debug_info *dbg;
 #endif
 };
 
+extern struct list_head ubifs_infos;
 extern spinlock_t ubifs_infos_lock;
+extern atomic_long_t ubifs_clean_zn_cnt;
 extern struct kmem_cache *ubifs_inode_slab;
 extern const struct super_operations ubifs_super_operations;
 extern const struct address_space_operations ubifs_file_address_operations;
@@ -1836,16 +2072,23 @@ extern struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT];
 
 /* io.c */
 void ubifs_ro_mode(struct ubifs_info *c, int err);
+int ubifs_leb_read(const struct ubifs_info *c, int lnum, void *buf, int offs,
+		   int len, int even_ebadmsg);
+int ubifs_leb_write(struct ubifs_info *c, int lnum, const void *buf, int offs,
+		    int len);
+int ubifs_leb_change(struct ubifs_info *c, int lnum, const void *buf, int len);
+int ubifs_leb_unmap(struct ubifs_info *c, int lnum);
+int ubifs_leb_map(struct ubifs_info *c, int lnum);
+int ubifs_is_mapped(const struct ubifs_info *c, int lnum);
 int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len);
-int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs,
-			   int dtype);
+int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs);
 int ubifs_wbuf_init(struct ubifs_info *c, struct ubifs_wbuf *wbuf);
 int ubifs_read_node(const struct ubifs_info *c, void *buf, int type, int len,
 		    int lnum, int offs);
 int ubifs_read_node_wbuf(struct ubifs_wbuf *wbuf, void *buf, int type, int len,
 			 int lnum, int offs);
 int ubifs_write_node(struct ubifs_info *c, void *node, int len, int lnum,
-		     int offs, int dtype);
+		     int offs);
 int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
 		     int offs, int quiet, int must_chk_crc);
 void ubifs_prepare_node(struct ubifs_info *c, void *buf, int len, int pad);
@@ -1859,7 +2102,7 @@ int ubifs_sync_wbufs_by_inode(struct ubifs_info *c, struct inode *inode);
 
 /* scan.c */
 struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum,
-				  int offs, void *sbuf);
+				  int offs, void *sbuf, int quiet);
 void ubifs_scan_destroy(struct ubifs_scan_leb *sleb);
 int ubifs_scan_a_node(const struct ubifs_info *c, void *buf, int len, int lnum,
 		      int offs, int quiet);
@@ -1921,7 +2164,7 @@ long long ubifs_reported_space(const struct ubifs_info *c, long long free);
 long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs);
 
 /* find.c */
-int ubifs_find_free_space(struct ubifs_info *c, int min_space, int *free,
+int ubifs_find_free_space(struct ubifs_info *c, int min_space, int *offs,
 			  int squeeze);
 int ubifs_find_free_leb_for_idx(struct ubifs_info *c);
 int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp,
@@ -1983,8 +2226,13 @@ int ubifs_tnc_read_node(struct ubifs_info *c, struct ubifs_zbranch *zbr,
 int ubifs_tnc_start_commit(struct ubifs_info *c, struct ubifs_zbranch *zroot);
 int ubifs_tnc_end_commit(struct ubifs_info *c);
 
+#ifndef __UBOOT__
 /* shrinker.c */
-int ubifs_shrinker(int nr_to_scan, gfp_t gfp_mask);
+unsigned long ubifs_shrink_scan(struct shrinker *shrink,
+				struct shrink_control *sc);
+unsigned long ubifs_shrink_count(struct shrinker *shrink,
+				 struct shrink_control *sc);
+#endif
 
 /* commit.c */
 int ubifs_bg_thread(void *info);
@@ -2003,6 +2251,7 @@ int ubifs_write_master(struct ubifs_info *c);
 int ubifs_read_superblock(struct ubifs_info *c);
 struct ubifs_sb_node *ubifs_read_sb_node(struct ubifs_info *c);
 int ubifs_write_sb_node(struct ubifs_info *c, struct ubifs_sb_node *sup);
+int ubifs_fixup_free_space(struct ubifs_info *c);
 
 /* replay.c */
 int ubifs_validate_entry(struct ubifs_info *c,
@@ -2084,14 +2333,15 @@ const struct ubifs_lprops *ubifs_fast_find_free(struct ubifs_info *c);
 const struct ubifs_lprops *ubifs_fast_find_empty(struct ubifs_info *c);
 const struct ubifs_lprops *ubifs_fast_find_freeable(struct ubifs_info *c);
 const struct ubifs_lprops *ubifs_fast_find_frdi_idx(struct ubifs_info *c);
+int ubifs_calc_dark(const struct ubifs_info *c, int spc);
 
 /* file.c */
-int ubifs_fsync(struct file *file, struct dentry *dentry, int datasync);
+int ubifs_fsync(struct file *file, loff_t start, loff_t end, int datasync);
 int ubifs_setattr(struct dentry *dentry, struct iattr *attr);
 
 /* dir.c */
 struct inode *ubifs_new_inode(struct ubifs_info *c, const struct inode *dir,
-			      int mode);
+			      umode_t mode);
 int ubifs_getattr(struct vfsmount *mnt, struct dentry *dentry,
 		  struct kstat *stat);
 
@@ -2111,11 +2361,11 @@ int ubifs_iput(struct inode *inode);
 int ubifs_recover_master_node(struct ubifs_info *c);
 int ubifs_write_rcvrd_mst_node(struct ubifs_info *c);
 struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum,
-					 int offs, void *sbuf, int grouped);
+					 int offs, void *sbuf, int jhead);
 struct ubifs_scan_leb *ubifs_recover_log_leb(struct ubifs_info *c, int lnum,
 					     int offs, void *sbuf);
-int ubifs_recover_inl_heads(const struct ubifs_info *c, void *sbuf);
-int ubifs_clean_lebs(const struct ubifs_info *c, void *sbuf);
+int ubifs_recover_inl_heads(struct ubifs_info *c, void *sbuf);
+int ubifs_clean_lebs(struct ubifs_info *c, void *sbuf);
 int ubifs_rcvry_gc_commit(struct ubifs_info *c);
 int ubifs_recover_size_accum(struct ubifs_info *c, union ubifs_key *key,
 			     int deletion, loff_t new_size);
@@ -2131,24 +2381,22 @@ long ubifs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 
 /* compressor.c */
 int __init ubifs_compressors_init(void);
-void __exit ubifs_compressors_exit(void);
+void ubifs_compressors_exit(void);
 void ubifs_compress(const void *in_buf, int in_len, void *out_buf, int *out_len,
 		    int *compr_type);
 int ubifs_decompress(const void *buf, int len, void *out, int *out_len,
 		     int compr_type);
 
+#include "debug.h"
+#include "misc.h"
+#include "key.h"
+
+#ifdef __UBOOT__
 /* these are used in cmd_ubifs.c */
 int ubifs_init(void);
-int ubifs_mount(char *vol_name);
+int uboot_ubifs_mount(char *vol_name);
 void ubifs_umount(struct ubifs_info *c);
 int ubifs_ls(char *dir_name);
 int ubifs_load(char *filename, u32 addr, u32 size);
-
-#include "debug.h"
-#include "misc.h"
-#include "key.h"
-
-/* todo: Move these to a common U-Boot header */
-int lzo1x_decompress_safe(const unsigned char *in, size_t in_len,
-			  unsigned char *out, size_t *out_len);
+#endif
 #endif /* !__UBIFS_H__ */
diff --git a/fs/yaffs2/ydirectenv.h b/fs/yaffs2/ydirectenv.h
index c6614f1..2b3e84f 100644
--- a/fs/yaffs2/ydirectenv.h
+++ b/fs/yaffs2/ydirectenv.h
@@ -58,8 +58,6 @@ void yaffs_qsort(void *aa, size_t n, size_t es,
 #define inline
 #endif
 
-#define cond_resched()  do {} while (0)
-
 #define yaffs_trace(msk, fmt, ...) do { \
 	if (yaffs_trace_mask & (msk)) \
 		printf("yaffs: " fmt "\n", ##__VA_ARGS__); \
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 3fdfb39..59d8d27 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -1,6 +1,11 @@
 #ifndef _LINUX_COMPAT_H_
 #define _LINUX_COMPAT_H_
 
+#include <malloc.h>
+
+struct unused {};
+typedef struct unused unused_t;
+
 #define ndelay(x)	udelay(1)
 
 #define dev_dbg(dev, fmt, args...)		\
@@ -12,6 +17,7 @@
 #define dev_err(dev, fmt, args...)		\
 	printf(fmt, ##args)
 #define printk	printf
+#define printk_once	printf
 
 #define KERN_EMERG
 #define KERN_ALERT
@@ -22,9 +28,15 @@
 #define KERN_INFO
 #define KERN_DEBUG
 
-#define kmalloc(size, flags)	malloc(size)
-#define kzalloc(size, flags)	calloc(size, 1)
-#define vmalloc(size)		malloc(size)
+#define DPRINTK(format, args...)					\
+do {									\
+	printf("%s[%d]: " format "\n", __func__, __LINE__, ##args);	\
+} while (0)
+
+void *kmalloc(size_t size, int flags);
+void *kzalloc(size_t size, int flags);
+#define vmalloc(size)		kmalloc(size, 0)
+#define __vmalloc(size, flags, pgsz)	kmalloc(size, flags)
 #define kfree(ptr)		free(ptr)
 #define vfree(ptr)		free(ptr)
 
@@ -57,4 +69,313 @@
 				  , __FILE__, __LINE__); }
 
 #define PAGE_SIZE	4096
+
+/* drivers/char/random.c */
+#define get_random_bytes(...)
+
+/* idr.c */
+typedef unsigned gfp_t;
+
+#define GFP_ATOMIC ((gfp_t) 0)
+#define GFP_KERNEL ((gfp_t) 0)
+#define GFP_NOFS ((gfp_t) 0)
+#define GFP_USER ((gfp_t) 0)
+#define __GFP_NOWARN ((gfp_t) 0)
+
+/* include/linux/leds.h */
+struct led_trigger {};
+
+#define DEFINE_LED_TRIGGER(x)		static struct led_trigger *x;
+enum led_brightness {
+	LED_OFF		= 0,
+	LED_HALF	= 127,
+	LED_FULL	= 255,
+};
+
+static inline void led_trigger_register_simple(const char *name,
+					struct led_trigger **trigger) {}
+static inline void led_trigger_unregister_simple(struct led_trigger *trigger) {}
+static inline void led_trigger_event(struct led_trigger *trigger,
+					enum led_brightness event) {}
+
+/* include/linux/log2.h */
+static inline int is_power_of_2(unsigned long n)
+{
+	return (n != 0 && ((n & (n - 1)) == 0));
+}
+
+/* uapi/linux/limits.h */
+#define XATTR_LIST_MAX 65536	/* size of extended attribute namelist (64k) */
+
+/**
+ * The type used for indexing onto a disc or disc partition.
+ *
+ * Linux always considers sectors to be 512 bytes long independently
+ * of the devices real block size.
+ *
+ * blkcnt_t is the type of the inode's block count.
+ */
+#ifdef CONFIG_LBDAF
+typedef u64 sector_t;
+typedef u64 blkcnt_t;
+#else
+typedef unsigned long sector_t;
+typedef unsigned long blkcnt_t;
+#endif
+
+#define ENOTSUPP	524	/* Operation is not supported */
+
+/* from include/linux/kernel.h */
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x, y) ((__typeof__(x))((y)-1))
+#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
+#define round_down(x, y) ((x) & ~__round_mask(x, y))
+
+/* module */
+#define THIS_MODULE		0
+#define try_module_get(...)	1
+#define module_put(...)		do { } while (0)
+#define module_init(...)
+#define module_exit(...)
+#define EXPORT_SYMBOL(...)
+#define EXPORT_SYMBOL_GPL(...)
+#define module_param(...)
+#define module_param_call(...)
+#define MODULE_PARM_DESC(...)
+#define MODULE_VERSION(...)
+#define MODULE_DESCRIPTION(...)
+#define MODULE_AUTHOR(...)
+#define MODULE_LICENSE(...)
+#define MODULE_ALIAS(...)
+#define __module_get(...)
+
+#define smp_rmb()
+
+/* character device */
+#define MKDEV(...)			0
+#define MAJOR(dev)			0
+#define MINOR(dev)			0
+
+#define alloc_chrdev_region(...)	0
+#define unregister_chrdev_region(...)
+
+#define class_create(...)		__builtin_return_address(0)
+#define class_create_file(...)		0
+#define class_remove_file(...)
+#define class_destroy(...)
+#define misc_register(...)		0
+#define misc_deregister(...)
+
+#define blocking_notifier_call_chain(...) 0
+
+/*
+ * Multiplies an integer by a fraction, while avoiding unnecessary
+ * overflow or loss of precision.
+ */
+#define mult_frac(x, numer, denom)(			\
+{							\
+	typeof(x) quot = (x) / (denom);			\
+	typeof(x) rem  = (x) % (denom);			\
+	(quot * (numer)) + ((rem * (numer)) / (denom));	\
+}							\
+)
+
+#define __initdata
+#define late_initcall(...)
+
+#define dev_set_name(...)		do { } while (0)
+#define device_register(...)		0
+#define volume_sysfs_init(...)		0
+#define volume_sysfs_close(...)		do { } while (0)
+
+#define init_waitqueue_head(...)	do { } while (0)
+#define wait_event_interruptible(...)	0
+#define wake_up_interruptible(...)	do { } while (0)
+#define print_hex_dump(...)		do { } while (0)
+#define dump_stack(...)			do { } while (0)
+
+#define task_pid_nr(x)			0
+#define set_freezable(...)		do { } while (0)
+#define try_to_freeze(...)		0
+#define set_current_state(...)		do { } while (0)
+#define kthread_should_stop(...)	0
+#define schedule()			do { } while (0)
+
+#define setup_timer(timer, func, data) do {} while (0)
+#define del_timer_sync(timer) do {} while (0)
+#define schedule_work(work) do {} while (0)
+#define INIT_WORK(work, fun) do {} while (0)
+
+struct work_struct {};
+
+unsigned long copy_from_user(void *dest, const void *src,
+			     unsigned long count);
+
+void *vzalloc(unsigned long size);
+
+typedef unused_t spinlock_t;
+typedef int	wait_queue_head_t;
+
+#define spin_lock_init(lock) do {} while (0)
+#define spin_lock(lock) do {} while (0)
+#define spin_unlock(lock) do {} while (0)
+#define spin_lock_irqsave(lock, flags) do {} while (0)
+#define spin_unlock_irqrestore(lock, flags) do {} while (0)
+
+#define DEFINE_MUTEX(...)
+#define mutex_init(...)
+#define mutex_lock(...)
+#define mutex_unlock(...)
+
+#define init_rwsem(...)			do { } while (0)
+#define down_read(...)			do { } while (0)
+#define down_write(...)			do { } while (0)
+#define down_write_trylock(...)		1
+#define up_read(...)			do { } while (0)
+#define up_write(...)			do { } while (0)
+
+struct kmem_cache { int sz; };
+
+struct kmem_cache *get_mem(int element_sz);
+#define kmem_cache_create(a, sz, c, d, e)	get_mem(sz)
+void *kmem_cache_alloc(struct kmem_cache *obj, int flag);
+#define kmem_cache_free(obj, size)	free(size)
+#define kmem_cache_destroy(obj)		free(obj)
+
+#define cond_resched()			do { } while (0)
+#define yield()				do { } while (0)
+
+#define INT_MAX				((int)(~0U>>1))
+
+#define __user
+#define __init
+#define __exit
+#define __devinit
+#define __devinitdata
+#define __devinitconst
+#define __iomem
+
+#define kthread_create(...)	__builtin_return_address(0)
+#define kthread_stop(...)	do { } while (0)
+#define wake_up_process(...)	do { } while (0)
+
+struct rw_semaphore { int i; };
+#define down_write(...)			do { } while (0)
+#define up_write(...)			do { } while (0)
+#define down_read(...)			do { } while (0)
+#define up_read(...)			do { } while (0)
+struct device {
+	struct device		*parent;
+	struct class		*class;
+	dev_t			devt;	/* dev_t, creates the sysfs "dev" */
+	void	(*release)(struct device *dev);
+	/* This is used from drivers/usb/musb-new subsystem only */
+	void		*driver_data;	/* data private to the driver */
+	void            *device_data;   /* data private to the device */
+};
+struct mutex { int i; };
+struct kernel_param { int i; };
+
+struct cdev {
+	int owner;
+	dev_t dev;
+};
+#define cdev_init(...)		do { } while (0)
+#define cdev_add(...)		0
+#define cdev_del(...)		do { } while (0)
+
+#define MAX_ERRNO		4095
+
+#define prandom_u32(...)	0
+
+typedef struct {
+	uid_t val;
+} kuid_t;
+
+typedef struct {
+	gid_t val;
+} kgid_t;
+
+/* from include/linux/types.h */
+
+typedef int	atomic_t;
+/**
+ * struct callback_head - callback structure for use with RCU and task_work
+ * @next: next update requests in a list
+ * @func: actual update function to call after the grace period.
+ */
+struct callback_head {
+	struct callback_head *next;
+	void (*func)(struct callback_head *head);
+};
+#define rcu_head callback_head
+enum writeback_sync_modes {
+	WB_SYNC_NONE,	/* Don't wait on anything */
+	WB_SYNC_ALL,	/* Wait on every mapping */
+};
+
+/* from include/linux/writeback.h */
+/*
+ * A control structure which tells the writeback code what to do.  These are
+ * always on the stack, and hence need no locking.  They are always initialised
+ * in a manner such that unspecified fields are set to zero.
+ */
+struct writeback_control {
+	long nr_to_write;		/* Write this many pages, and decrement
+					   this for each page written */
+	long pages_skipped;		/* Pages which were not written */
+
+	/*
+	 * For a_ops->writepages(): if start or end are non-zero then this is
+	 * a hint that the filesystem need only write out the pages inside that
+	 * byterange.  The byte at `end' is included in the writeout request.
+	 */
+	loff_t range_start;
+	loff_t range_end;
+
+	enum writeback_sync_modes sync_mode;
+
+	unsigned for_kupdate:1;		/* A kupdate writeback */
+	unsigned for_background:1;	/* A background writeback */
+	unsigned tagged_writepages:1;	/* tag-and-write to avoid livelock */
+	unsigned for_reclaim:1;		/* Invoked from the page allocator */
+	unsigned range_cyclic:1;	/* range_start is cyclic */
+	unsigned for_sync:1;		/* sync(2) WB_SYNC_ALL writeback */
+};
+
+void *kmemdup(const void *src, size_t len, gfp_t gfp);
+
+typedef int irqreturn_t;
+
+struct timer_list {};
+struct notifier_block {};
+
+typedef unsigned long dmaaddr_t;
+
+#define cpu_relax() do {} while (0)
+
+#define pm_runtime_get_sync(dev) do {} while (0)
+#define pm_runtime_put(dev) do {} while (0)
+#define pm_runtime_put_sync(dev) do {} while (0)
+#define pm_runtime_use_autosuspend(dev) do {} while (0)
+#define pm_runtime_set_autosuspend_delay(dev, delay) do {} while (0)
+#define pm_runtime_enable(dev) do {} while (0)
+
+#define IRQ_NONE 0
+#define IRQ_HANDLED 1
+
+#define dev_set_drvdata(dev, data) do {} while (0)
+
+#define enable_irq(...)
+#define disable_irq(...)
+#define disable_irq_wake(irq) do {} while (0)
+#define enable_irq_wake(irq) -EINVAL
+#define free_irq(irq, data) do {} while (0)
+#define request_irq(nr, f, flags, nm, data) 0
+
 #endif
diff --git a/include/linux/err.h b/include/linux/err.h
index 96c0c72..e490301 100644
--- a/include/linux/err.h
+++ b/include/linux/err.h
@@ -2,7 +2,7 @@
 #define _LINUX_ERR_H
 
 /* XXX U-BOOT XXX */
-#if 0
+#if 1
 #include <linux/compiler.h>
 #else
 #include <linux/compat.h>
@@ -40,6 +40,19 @@ static inline long IS_ERR(const void *ptr)
 	return IS_ERR_VALUE((unsigned long)ptr);
 }
 
+/**
+ * ERR_CAST - Explicitly cast an error-valued pointer to another pointer type
+ * @ptr: The pointer to cast.
+ *
+ * Explicitly cast an error-valued pointer to another pointer type in such a
+ * way as to make it clear that's what's going on.
+ */
+static inline void * __must_check ERR_CAST(__force const void *ptr)
+{
+	/* cast away the const */
+	return (void *) ptr;
+}
+
 #endif
 
 #endif /* _LINUX_ERR_H */
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 25a3d3a..be81d38 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -4,13 +4,14 @@
  *  NAND family Bad Block Management (BBM) header file
  *    - Bad Block Table (BBT) implementation
  *
- *  Copyright (c) 2005-2007 Samsung Electronics
+ *  Copyright © 2005 Samsung Electronics
  *  Kyungmin Park <kyungmin.park at samsung.com>
  *
- *  Copyright (c) 2000-2005
+ *  Copyright © 2000-2005
  *  Thomas Gleixner <tglx at linuxtronix.de>
  *
  * SPDX-License-Identifier:	GPL-2.0+
+ *
  */
 #ifndef __LINUX_MTD_BBM_H
 #define __LINUX_MTD_BBM_H
@@ -22,22 +23,21 @@
 
 /**
  * struct nand_bbt_descr - bad block table descriptor
- * @param options	options for this descriptor
- * @param pages		the page(s) where we find the bbt, used with
- *			option BBT_ABSPAGE when bbt is searched,
- *			then we store the found bbts pages here.
- *			Its an array and supports up to 8 chips now
- * @param offs		offset of the pattern in the oob area of the page
- * @param veroffs	offset of the bbt version counter in the oob are of the page
- * @param version	version read from the bbt page during scan
- * @param len		length of the pattern, if 0 no pattern check is performed
- * @param maxblocks	maximum number of blocks to search for a bbt. This number of
- *			blocks is reserved at the end of the device
- *			where the tables are written.
- * @param reserved_block_code	if non-0, this pattern denotes a reserved
- *			(rather than bad) block in the stored bbt
- * @param pattern	pattern to identify bad block table or factory marked
- *			good / bad blocks, can be NULL, if len = 0
+ * @options:	options for this descriptor
+ * @pages:	the page(s) where we find the bbt, used with option BBT_ABSPAGE
+ *		when bbt is searched, then we store the found bbts pages here.
+ *		Its an array and supports up to 8 chips now
+ * @offs:	offset of the pattern in the oob area of the page
+ * @veroffs:	offset of the bbt version counter in the oob are of the page
+ * @version:	version read from the bbt page during scan
+ * @len:	length of the pattern, if 0 no pattern check is performed
+ * @maxblocks:	maximum number of blocks to search for a bbt. This number of
+ *		blocks is reserved at the end of the device where the tables are
+ *		written.
+ * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
+ *              bad) block in the stored bbt
+ * @pattern:	pattern to identify bad block table or factory marked good /
+ *		bad blocks, can be NULL, if len = 0
  *
  * Descriptor for the bad block table marker and the descriptor for the
  * pattern which identifies good and bad blocks. The assumption is made
@@ -81,10 +81,6 @@ struct nand_bbt_descr {
  * with NAND_BBT_CREATE.
  */
 #define NAND_BBT_CREATE_EMPTY	0x00000400
-/* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES	0x00000800
-/* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY	0x00001000
 /* Write bbt if neccecary */
 #define NAND_BBT_WRITE		0x00002000
 /* Read and write back block contents when writing bbt */
@@ -122,22 +118,27 @@ struct nand_bbt_descr {
 /*
  * Constants for oob configuration
  */
-#define ONENAND_BADBLOCK_POS	0
+#define NAND_SMALL_BADBLOCK_POS		5
+#define NAND_LARGE_BADBLOCK_POS		0
+#define ONENAND_BADBLOCK_POS		0
 
 /*
  * Bad block scanning errors
  */
-#define ONENAND_BBT_READ_ERROR          1
-#define ONENAND_BBT_READ_ECC_ERROR      2
-#define ONENAND_BBT_READ_FATAL_ERROR    4
+#define ONENAND_BBT_READ_ERROR		1
+#define ONENAND_BBT_READ_ECC_ERROR	2
+#define ONENAND_BBT_READ_FATAL_ERROR	4
 
 /**
- * struct bbt_info - [GENERIC] Bad Block Table data structure
- * @param bbt_erase_shift	[INTERN] number of address bits in a bbt entry
- * @param badblockpos		[INTERN] position of the bad block marker in the oob area
- * @param bbt			[INTERN] bad block table pointer
- * @param badblock_pattern	[REPLACEABLE] bad block scan pattern used for initial bad block scan
- * @param priv			[OPTIONAL] pointer to private bbm date
+ * struct bbm_info - [GENERIC] Bad Block Table data structure
+ * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry
+ * @badblockpos:	[INTERN] position of the bad block marker in the oob area
+ * @options:		options for this descriptor
+ * @bbt:		[INTERN] bad block table pointer
+ * @isbad_bbt:		function to determine if a block is bad
+ * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for
+ *			initial bad block scan
+ * @priv:		[OPTIONAL] pointer to private bbm date
  */
 struct bbm_info {
 	int bbt_erase_shift;
@@ -146,7 +147,7 @@ struct bbm_info {
 
 	uint8_t *bbt;
 
-	int (*isbad_bbt) (struct mtd_info * mtd, loff_t ofs, int allowbbt);
+	int (*isbad_bbt)(struct mtd_info *mtd, loff_t ofs, int allowbbt);
 
 	/* TODO Add more NAND specific fileds */
 	struct nand_bbt_descr *badblock_pattern;
@@ -155,7 +156,7 @@ struct bbm_info {
 };
 
 /* OneNAND BBT interface */
-extern int onenand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd);
-extern int onenand_default_bbt (struct mtd_info *mtd);
+extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
+extern int onenand_default_bbt(struct mtd_info *mtd);
 
-#endif				/* __LINUX_MTD_BBM_H */
+#endif	/* __LINUX_MTD_BBM_H */
diff --git a/include/linux/mtd/concat.h b/include/linux/mtd/concat.h
index c92b4dd..195a4a5 100644
--- a/include/linux/mtd/concat.h
+++ b/include/linux/mtd/concat.h
@@ -12,7 +12,11 @@
 struct mtd_info *mtd_concat_create(
     struct mtd_info *subdev[],  /* subdevices to concatenate */
     int num_devs,               /* number of subdevices      */
+#ifndef __UBOOT__
     const char *name);          /* name for the new device   */
+#else
+    char *name);          /* name for the new device   */
+#endif
 
 void mtd_concat_destroy(struct mtd_info *mtd);
 
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
new file mode 100644
index 0000000..7028ee1
--- /dev/null
+++ b/include/linux/mtd/flashchip.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright © 2000      Red Hat UK Limited
+ * Copyright © 2000-2010 David Woodhouse <dwmw2 at infradead.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#ifndef __MTD_FLASHCHIP_H__
+#define __MTD_FLASHCHIP_H__
+
+#define __UBOOT__
+#ifndef __UBOOT__
+/* For spinlocks. sched.h includes spinlock.h from whichever directory it
+ * happens to be in - so we don't have to care whether we're on 2.2, which
+ * has asm/spinlock.h, or 2.4, which has linux/spinlock.h
+ */
+#include <linux/sched.h>
+#include <linux/mutex.h>
+#endif
+
+typedef enum {
+	FL_READY,
+	FL_STATUS,
+	FL_CFI_QUERY,
+	FL_JEDEC_QUERY,
+	FL_ERASING,
+	FL_ERASE_SUSPENDING,
+	FL_ERASE_SUSPENDED,
+	FL_WRITING,
+	FL_WRITING_TO_BUFFER,
+	FL_OTP_WRITE,
+	FL_WRITE_SUSPENDING,
+	FL_WRITE_SUSPENDED,
+	FL_PM_SUSPENDED,
+	FL_SYNCING,
+	FL_UNLOADING,
+	FL_LOCKING,
+	FL_UNLOCKING,
+	FL_POINT,
+	FL_XIP_WHILE_ERASING,
+	FL_XIP_WHILE_WRITING,
+	FL_SHUTDOWN,
+	/* These 2 come from nand_state_t, which has been unified here */
+	FL_READING,
+	FL_CACHEDPRG,
+	/* These 4 come from onenand_state_t, which has been unified here */
+	FL_RESETING,
+	FL_OTPING,
+	FL_PREPARING_ERASE,
+	FL_VERIFYING_ERASE,
+
+	FL_UNKNOWN
+} flstate_t;
+
+
+
+/* NOTE: confusingly, this can be used to refer to more than one chip at a time,
+   if they're interleaved.  This can even refer to individual partitions on
+   the same physical chip when present. */
+
+struct flchip {
+	unsigned long start; /* Offset within the map */
+	//	unsigned long len;
+	/* We omit len for now, because when we group them together
+	   we insist that they're all of the same size, and the chip size
+	   is held in the next level up. If we get more versatile later,
+	   it'll make it a damn sight harder to find which chip we want from
+	   a given offset, and we'll want to add the per-chip length field
+	   back in.
+	*/
+	int ref_point_counter;
+	flstate_t state;
+	flstate_t oldstate;
+
+	unsigned int write_suspended:1;
+	unsigned int erase_suspended:1;
+	unsigned long in_progress_block_addr;
+
+	struct mutex mutex;
+#ifndef __UBOOT__
+	wait_queue_head_t wq; /* Wait on here when we're waiting for the chip
+			     to be ready */
+#endif
+	int word_write_time;
+	int buffer_write_time;
+	int erase_time;
+
+	int word_write_time_max;
+	int buffer_write_time_max;
+	int erase_time_max;
+
+	void *priv;
+};
+
+/* This is used to handle contention on write/erase operations
+   between partitions of the same physical chip. */
+struct flchip_shared {
+	struct mutex lock;
+	struct flchip *writing;
+	struct flchip *erasing;
+};
+
+
+#endif /* __MTD_FLASHCHIP_H__ */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index a65b681..b7b4757 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -1,48 +1,45 @@
 /*
- * Copyright (C) 1999-2003 David Woodhouse <dwmw2 at infradead.org> et al.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2 at infradead.org> et al.
  *
  * Released under GPL
+ *
  */
 
 #ifndef __MTD_MTD_H__
 #define __MTD_MTD_H__
 
+#define __UBOOT__
+#ifndef __UBOOT__
 #include <linux/types.h>
-#include <div64.h>
+#include <linux/uio.h>
+#include <linux/notifier.h>
+#include <linux/device.h>
+
+#include <mtd/mtd-abi.h>
+
+#include <asm/div64.h>
+#else
+#include <linux/compat.h>
 #include <mtd/mtd-abi.h>
 #include <asm/errno.h>
+#include <div64.h>
 
-#define MTD_CHAR_MAJOR 90
-#define MTD_BLOCK_MAJOR 31
 #define MAX_MTD_DEVICES 32
+#endif
 
 #define MTD_ERASE_PENDING	0x01
 #define MTD_ERASING		0x02
 #define MTD_ERASE_SUSPEND	0x04
-#define MTD_ERASE_DONE          0x08
-#define MTD_ERASE_FAILED        0x10
+#define MTD_ERASE_DONE		0x08
+#define MTD_ERASE_FAILED	0x10
 
-#define MTD_FAIL_ADDR_UNKNOWN	-1LL
+#define MTD_FAIL_ADDR_UNKNOWN -1LL
 
 /*
- * Enumeration for NAND/OneNAND flash chip state
+ * If the erase fails, fail_addr might indicate exactly which block failed. If
+ * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level
+ * or was not specific to any particular block.
  */
-enum {
-	FL_READY,
-	FL_READING,
-	FL_WRITING,
-	FL_ERASING,
-	FL_SYNCING,
-	FL_CACHEDPRG,
-	FL_RESETING,
-	FL_UNLOCKING,
-	FL_LOCKING,
-	FL_PM_SUSPENDED,
-};
-
-/* If the erase fails, fail_addr might indicate exactly which block failed.  If
-   fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level or was not
-   specific to any particular block. */
 struct erase_info {
 	struct mtd_info *mtd;
 	uint64_t addr;
@@ -50,8 +47,8 @@ struct erase_info {
 	uint64_t fail_addr;
 	u_long time;
 	u_long retries;
-	u_int dev;
-	u_int cell;
+	unsigned dev;
+	unsigned cell;
 	void (*callback) (struct erase_info *self);
 	u_long priv;
 	u_char state;
@@ -60,9 +57,9 @@ struct erase_info {
 };
 
 struct mtd_erase_region_info {
-	uint64_t offset;			/* At which this region starts, from the beginning of the MTD */
-	u_int32_t erasesize;		/* For this region */
-	u_int32_t numblocks;		/* Number of blocks of erasesize in this region */
+	uint64_t offset;		/* At which this region starts, from the beginning of the MTD */
+	uint32_t erasesize;		/* For this region */
+	uint32_t numblocks;		/* Number of blocks of erasesize in this region */
 	unsigned long *lockmap;		/* If keeping bitmap of locks */
 };
 
@@ -81,7 +78,7 @@ struct mtd_erase_region_info {
  * @datbuf:	data buffer - if NULL only oob data are read/written
  * @oobbuf:	oob data buffer
  *
- * Note, it is allowed to read more then one OOB area at one go, but not write.
+ * Note, it is allowed to read more than one OOB area at one go, but not write.
  * The interface assumes that the OOB write requests program only one page's
  * OOB area.
  */
@@ -109,26 +106,30 @@ struct mtd_oob_ops {
 #endif
 
 /*
- * ECC layout control structure. Exported to userspace for
- * diagnosis and to allow creation of raw images
+ * Internal ECC layout control structure. For historical reasons, there is a
+ * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained
+ * for export to user-space via the ECCGETLAYOUT ioctl.
+ * nand_ecclayout should be expandable in the future simply by the above macros.
  */
 struct nand_ecclayout {
-	uint32_t eccbytes;
-	uint32_t eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
-	uint32_t oobavail;
+	__u32 eccbytes;
+	__u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
+	__u32 oobavail;
 	struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
 };
 
+struct module;	/* only needed for owner field in mtd_info */
+
 struct mtd_info {
 	u_char type;
-	u_int32_t flags;
-	uint64_t size;	 /* Total size of the MTD */
+	uint32_t flags;
+	uint64_t size;	 // Total size of the MTD
 
 	/* "Major" erase size for the device. Naïve users may take this
 	 * to be the only erase size available, or may use the more detailed
 	 * information below if they desire
 	 */
-	u_int32_t erasesize;
+	uint32_t erasesize;
 	/* Minimal writable flash unit size. In case of NOR flash it is 1 (even
 	 * though individual bits can be cleared), in case of NAND flash it is
 	 * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
@@ -136,10 +137,31 @@ struct mtd_info {
 	 * Any driver registering a struct mtd_info must ensure a writesize of
 	 * 1 or larger.
 	 */
-	u_int32_t writesize;
+	uint32_t writesize;
+
+	/*
+	 * Size of the write buffer used by the MTD. MTD devices having a write
+	 * buffer can write multiple writesize chunks at a time. E.g. while
+	 * writing 4 * writesize bytes to a device with 2 * writesize bytes
+	 * buffer the MTD driver can (but doesn't have to) do 2 writesize
+	 * operations, but not 4. Currently, all NANDs have writebufsize
+	 * equivalent to writesize (NAND page size). Some NOR flashes do have
+	 * writebufsize greater than writesize.
+	 */
+	uint32_t writebufsize;
 
-	u_int32_t oobsize;   /* Amount of OOB data per block (e.g. 16) */
-	u_int32_t oobavail;  /* Available OOB bytes per block */
+	uint32_t oobsize;   // Amount of OOB data per block (e.g. 16)
+	uint32_t oobavail;  // Available OOB bytes per block
+
+	/*
+	 * If erasesize is a power of 2 then the shift is stored in
+	 * erasesize_shift otherwise erasesize_shift is zero. Ditto writesize.
+	 */
+	unsigned int erasesize_shift;
+	unsigned int writesize_shift;
+	/* Masks based on erasesize_shift and writesize_shift */
+	unsigned int erasesize_mask;
+	unsigned int writesize_mask;
 
 	/*
 	 * read ops return -EUCLEAN if max number of bitflips corrected on any
@@ -150,13 +172,20 @@ struct mtd_info {
 	 */
 	unsigned int bitflip_threshold;
 
-	/* Kernel-only stuff starts here. */
+	// Kernel-only stuff starts here.
+#ifndef __UBOOT__
 	const char *name;
+#else
+	char *name;
+#endif
 	int index;
 
 	/* ECC layout structure pointer - read only! */
 	struct nand_ecclayout *ecclayout;
 
+	/* the ecc step size. */
+	unsigned int ecc_step_size;
+
 	/* max number of correctible bit errors per ecc step */
 	unsigned int ecc_strength;
 
@@ -171,44 +200,51 @@ struct mtd_info {
 	 * wrappers instead.
 	 */
 	int (*_erase) (struct mtd_info *mtd, struct erase_info *instr);
+#ifndef __UBOOT__
 	int (*_point) (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, void **virt, phys_addr_t *phys);
-	void (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
+		       size_t *retlen, void **virt, resource_size_t *phys);
+	int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
+#endif
+	unsigned long (*_get_unmapped_area) (struct mtd_info *mtd,
+					     unsigned long len,
+					     unsigned long offset,
+					     unsigned long flags);
 	int (*_read) (struct mtd_info *mtd, loff_t from, size_t len,
-		     size_t *retlen, u_char *buf);
+		      size_t *retlen, u_char *buf);
 	int (*_write) (struct mtd_info *mtd, loff_t to, size_t len,
-		      size_t *retlen, const u_char *buf);
-
-	/* In blackbox flight recorder like scenarios we want to make successful
-	   writes in interrupt context. panic_write() is only intended to be
-	   called when its known the kernel is about to panic and we need the
-	   write to succeed. Since the kernel is not going to be running for much
-	   longer, this function can break locks and delay to ensure the write
-	   succeeds (but not sleep). */
-
-	int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
-
+		       size_t *retlen, const u_char *buf);
+	int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len,
+			     size_t *retlen, const u_char *buf);
 	int (*_read_oob) (struct mtd_info *mtd, loff_t from,
-			 struct mtd_oob_ops *ops);
+			  struct mtd_oob_ops *ops);
 	int (*_write_oob) (struct mtd_info *mtd, loff_t to,
-			 struct mtd_oob_ops *ops);
+			   struct mtd_oob_ops *ops);
 	int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
-				   size_t len);
+				    size_t len);
 	int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from,
-				   size_t len, size_t *retlen, u_char *buf);
+				    size_t len, size_t *retlen, u_char *buf);
 	int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
-				   size_t len);
+				    size_t len);
 	int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
-				   size_t len, size_t *retlen, u_char *buf);
-	int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to, size_t len,
-				    size_t *retlen, u_char *buf);
+				    size_t len, size_t *retlen, u_char *buf);
+	int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to,
+				     size_t len, size_t *retlen, u_char *buf);
 	int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from,
-				   size_t len);
+				    size_t len);
+#ifndef __UBOOT__
+	int (*_writev) (struct mtd_info *mtd, const struct kvec *vecs,
+			unsigned long count, loff_t to, size_t *retlen);
+#endif
 	void (*_sync) (struct mtd_info *mtd);
 	int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
 	int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+	int (*_is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
 	int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
 	int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
+#ifndef __UBOOT__
+	int (*_suspend) (struct mtd_info *mtd);
+	void (*_resume) (struct mtd_info *mtd);
+#endif
 	/*
 	 * If the driver is something smart, like UBI, it may need to maintain
 	 * its own reference counting. The below functions are only for driver.
@@ -216,16 +252,12 @@ struct mtd_info {
 	int (*_get_device) (struct mtd_info *mtd);
 	void (*_put_device) (struct mtd_info *mtd);
 
-/* XXX U-BOOT XXX */
-#if 0
-	/* kvec-based read/write methods.
-	   NB: The 'count' parameter is the number of _vectors_, each of
-	   which contains an (ofs, len) tuple.
-	*/
-	int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
-#endif
-/* XXX U-BOOT XXX */
-#if 0
+#ifndef __UBOOT__
+	/* Backing device capabilities for this device
+	 * - provides mmap capabilities
+	 */
+	struct backing_dev_info *backing_dev_info;
+
 	struct notifier_block reboot_notifier;  /* default mode before reboot */
 #endif
 
@@ -237,10 +269,20 @@ struct mtd_info {
 	void *priv;
 
 	struct module *owner;
+#ifndef __UBOOT__
+	struct device dev;
+#endif
 	int usecount;
 };
 
 int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
+#ifndef __UBOOT__
+int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+	      void **virt, resource_size_t *phys);
+int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
+#endif
+unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len,
+				    unsigned long offset, unsigned long flags);
 int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
 	     u_char *buf);
 int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
@@ -273,8 +315,7 @@ int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
 			    size_t *retlen, u_char *buf);
 int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len);
 
-/* XXX U-BOOT XXX */
-#if 0
+#ifndef __UBOOT__
 int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
 	       unsigned long count, loff_t to, size_t *retlen);
 #endif
@@ -291,22 +332,59 @@ int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs);
 int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs);
 
+#ifndef __UBOOT__
+static inline int mtd_suspend(struct mtd_info *mtd)
+{
+	return mtd->_suspend ? mtd->_suspend(mtd) : 0;
+}
+
+static inline void mtd_resume(struct mtd_info *mtd)
+{
+	if (mtd->_resume)
+		mtd->_resume(mtd);
+}
+#endif
+
 static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
 {
+	if (mtd->erasesize_shift)
+		return sz >> mtd->erasesize_shift;
 	do_div(sz, mtd->erasesize);
 	return sz;
 }
 
 static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd)
 {
+	if (mtd->erasesize_shift)
+		return sz & mtd->erasesize_mask;
 	return do_div(sz, mtd->erasesize);
 }
 
+static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
+{
+	if (mtd->writesize_shift)
+		return sz >> mtd->writesize_shift;
+	do_div(sz, mtd->writesize);
+	return sz;
+}
+
+static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd)
+{
+	if (mtd->writesize_shift)
+		return sz & mtd->writesize_mask;
+	return do_div(sz, mtd->writesize);
+}
+
 static inline int mtd_has_oob(const struct mtd_info *mtd)
 {
 	return mtd->_read_oob && mtd->_write_oob;
 }
 
+static inline int mtd_type_is_nand(const struct mtd_info *mtd)
+{
+	return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH;
+}
+
 static inline int mtd_can_have_bb(const struct mtd_info *mtd)
 {
 	return !!mtd->_block_isbad;
@@ -314,27 +392,36 @@ static inline int mtd_can_have_bb(const struct mtd_info *mtd)
 
 	/* Kernel-side ioctl definitions */
 
-extern int add_mtd_device(struct mtd_info *mtd);
-extern int del_mtd_device (struct mtd_info *mtd);
-
+struct mtd_partition;
+struct mtd_part_parser_data;
+
+extern int mtd_device_parse_register(struct mtd_info *mtd,
+				     const char * const *part_probe_types,
+				     struct mtd_part_parser_data *parser_data,
+				     const struct mtd_partition *defparts,
+				     int defnr_parts);
+#define mtd_device_register(master, parts, nr_parts)	\
+	mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
+extern int mtd_device_unregister(struct mtd_info *master);
 extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
+extern int __get_mtd_device(struct mtd_info *mtd);
+extern void __put_mtd_device(struct mtd_info *mtd);
 extern struct mtd_info *get_mtd_device_nm(const char *name);
-
 extern void put_mtd_device(struct mtd_info *mtd);
-extern void mtd_get_len_incl_bad(struct mtd_info *mtd, uint64_t offset,
-				 const uint64_t length, uint64_t *len_incl_bad,
-				 int *truncated);
-/* XXX U-BOOT XXX */
-#if 0
+
+
+#ifndef __UBOOT__
 struct mtd_notifier {
 	void (*add)(struct mtd_info *mtd);
 	void (*remove)(struct mtd_info *mtd);
 	struct list_head list;
 };
 
+
 extern void register_mtd_user (struct mtd_notifier *new);
 extern int unregister_mtd_user (struct mtd_notifier *old);
 #endif
+void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
 
 #ifdef CONFIG_MTD_PARTITIONS
 void mtd_erase_callback(struct erase_info *instr);
@@ -346,6 +433,7 @@ static inline void mtd_erase_callback(struct erase_info *instr)
 }
 #endif
 
+#ifdef __UBOOT__
 /*
  * Debugging macro and defines
  */
@@ -372,7 +460,11 @@ static inline void mtd_erase_callback(struct erase_info *instr)
 #define pr_info(args...)	MTDDEBUG(MTD_DEBUG_LEVEL0, args)
 #define pr_warn(args...)	MTDDEBUG(MTD_DEBUG_LEVEL0, args)
 #define pr_err(args...)		MTDDEBUG(MTD_DEBUG_LEVEL0, args)
-
+#define pr_crit(args...)	MTDDEBUG(MTD_DEBUG_LEVEL0, args)
+#define pr_cont(args...)	MTDDEBUG(MTD_DEBUG_LEVEL0, args)
+#define pr_notice(args...)	MTDDEBUG(MTD_DEBUG_LEVEL0, args)
+#endif
+ 
 static inline int mtd_is_bitflip(int err) {
 	return err == -EUCLEAN;
 }
@@ -385,4 +477,10 @@ static inline int mtd_is_bitflip_or_eccerr(int err) {
 	return mtd_is_bitflip(err) || mtd_is_eccerr(err);
 }
 
+#ifdef __UBOOT__
+/* drivers/mtd/mtdcore.h */
+int add_mtd_device(struct mtd_info *mtd);
+int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+int del_mtd_partitions(struct mtd_info *);
+#endif
 #endif /* __MTD_MTD_H__ */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 0546565..5ade734 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -5,9 +5,7 @@
  *                        Steven J. Hill <sjhill at realitydiluted.com>
  *		          Thomas Gleixner <tglx at linutronix.de>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Info:
  *	Contains standard defines and IDs for NAND flash devices
@@ -18,21 +16,32 @@
 #ifndef __LINUX_MTD_NAND_H
 #define __LINUX_MTD_NAND_H
 
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/bbm.h>
+#else
 #include "config.h"
 
 #include "linux/compat.h"
 #include "linux/mtd/mtd.h"
+#include "linux/mtd/flashchip.h"
 #include "linux/mtd/bbm.h"
-
+#endif
 
 struct mtd_info;
 struct nand_flash_dev;
 /* Scan and identify a NAND device */
-extern int nand_scan (struct mtd_info *mtd, int max_chips);
-/* Separate phases of nand_scan(), allowing board driver to intervene
- * and override command or ECC setup according to flash type */
+extern int nand_scan(struct mtd_info *mtd, int max_chips);
+/*
+ * Separate phases of nand_scan(), allowing board driver to intervene
+ * and override command or ECC setup according to flash type.
+ */
 extern int nand_scan_ident(struct mtd_info *mtd, int max_chips,
-			   const struct nand_flash_dev *table);
+			   struct nand_flash_dev *table);
 extern int nand_scan_tail(struct mtd_info *mtd);
 
 /* Free resources held by the NAND device */
@@ -41,12 +50,23 @@ extern void nand_release(struct mtd_info *mtd);
 /* Internal helper for board drivers which need to override command function */
 extern void nand_wait_ready(struct mtd_info *mtd);
 
+#ifndef __UBOOT__
+/* locks all blocks present in the device */
+extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+
+/* unlocks specified locked blocks */
+extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+
+/* The maximum number of NAND chips in an array */
+#define NAND_MAX_CHIPS		8
+#endif
+
 /*
  * This constant declares the max. oobsize / page, which
  * is supported now. If you add a chip with bigger oobsize/page
  * adjust this accordingly.
  */
-#define NAND_MAX_OOBSIZE	640
+#define NAND_MAX_OOBSIZE	744
 #define NAND_MAX_PAGESIZE	8192
 
 /*
@@ -76,7 +96,6 @@ extern void nand_wait_ready(struct mtd_info *mtd);
 #define NAND_CMD_READOOB	0x50
 #define NAND_CMD_ERASE1		0x60
 #define NAND_CMD_STATUS		0x70
-#define NAND_CMD_STATUS_MULTI	0x71
 #define NAND_CMD_SEQIN		0x80
 #define NAND_CMD_RNDIN		0x85
 #define NAND_CMD_READID		0x90
@@ -87,10 +106,8 @@ extern void nand_wait_ready(struct mtd_info *mtd);
 #define NAND_CMD_RESET		0xff
 
 #define NAND_CMD_LOCK		0x2a
-#define NAND_CMD_LOCK_TIGHT	0x2c
 #define NAND_CMD_UNLOCK1	0x23
 #define NAND_CMD_UNLOCK2	0x24
-#define NAND_CMD_LOCK_STATUS	0x7a
 
 /* Extended commands for large page devices */
 #define NAND_CMD_READSTART	0x30
@@ -164,21 +181,12 @@ typedef enum {
 /* Chip has copy back function */
 #define NAND_COPYBACK		0x00000010
 /*
- * AND Chip which has 4 banks and a confusing page / block
- * assignment. See Renesas datasheet for further information.
+ * Chip requires ready check on read (for auto-incremented sequential read).
+ * True only for small page devices; large page devices do not support
+ * autoincrement.
  */
-#define NAND_IS_AND		0x00000020
-/*
- * Chip has a array of 4 pages which can be read without
- * additional ready /busy waits.
- */
-#define NAND_4PAGE_ARRAY	0x00000040
-/*
- * Chip requires that BBT is periodically rewritten to prevent
- * bits from adjacent blocks from 'leaking' in altering data.
- * This happens with the Renesas AG-AND chips, possibly others.
- */
-#define BBT_AUTO_REFRESH	0x00000080
+#define NAND_NEED_READRDY	0x00000100
+
 /* Chip does not allow subpage writes */
 #define NAND_NO_SUBPAGE_WRITE	0x00000200
 
@@ -189,16 +197,13 @@ typedef enum {
 #define NAND_ROM		0x00000800
 
 /* Device supports subpage reads */
-#define NAND_SUBPAGE_READ       0x00001000
+#define NAND_SUBPAGE_READ	0x00001000
 
 /* Options valid for Samsung large page devices */
-#define NAND_SAMSUNG_LP_OPTIONS \
-	(NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
+#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
 
 /* Macros to identify the above */
-#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
 #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
-#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
 #define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
 
 /* Non chip related options */
@@ -211,6 +216,13 @@ typedef enum {
 #define NAND_OWN_BUFFERS	0x00020000
 /* Chip may not exist, so silence any errors in scan */
 #define NAND_SCAN_SILENT_NODEV	0x00040000
+/*
+ * Autodetect nand buswidth with readid/onfi.
+ * This suppose the driver will configure the hardware in 8 bits mode
+ * when calling nand_scan_ident, and update its configuration
+ * before calling nand_scan_tail.
+ */
+#define NAND_BUSWIDTH_AUTO      0x00080000
 
 /* Options set by nand scan */
 /* bbt has already been read */
@@ -221,10 +233,15 @@ typedef enum {
 /* Cell info constants */
 #define NAND_CI_CHIPNR_MSK	0x03
 #define NAND_CI_CELLTYPE_MSK	0x0C
+#define NAND_CI_CELLTYPE_SHIFT	2
 
 /* Keep gcc happy */
 struct nand_chip;
 
+/* ONFI features */
+#define ONFI_FEATURE_16_BIT_BUS		(1 << 0)
+#define ONFI_FEATURE_EXT_PARAM_PAGE	(1 << 7)
+
 /* ONFI timing mode, used in both asynchronous and synchronous mode */
 #define ONFI_TIMING_MODE_0		(1 << 0)
 #define ONFI_TIMING_MODE_1		(1 << 1)
@@ -237,9 +254,15 @@ struct nand_chip;
 /* ONFI feature address */
 #define ONFI_FEATURE_ADDR_TIMING_MODE	0x1
 
+/* Vendor-specific feature address (Micron) */
+#define ONFI_FEATURE_ADDR_READ_RETRY	0x89
+
 /* ONFI subfeature parameters length */
 #define ONFI_SUBFEATURE_PARAM_LEN	4
 
+/* ONFI optional commands SET/GET FEATURES supported? */
+#define ONFI_OPT_CMD_SET_GET_FEATURES	(1 << 2)
+
 struct nand_onfi_params {
 	/* rev info and features block */
 	/* 'O' 'N' 'F' 'I'  */
@@ -247,7 +270,10 @@ struct nand_onfi_params {
 	__le16 revision;
 	__le16 features;
 	__le16 opt_cmd;
-	u8 reserved[22];
+	u8 reserved0[2];
+	__le16 ext_param_page_length; /* since ONFI 2.1 */
+	u8 num_of_param_pages;        /* since ONFI 2.1 */
+	u8 reserved1[17];
 
 	/* manufacturer information block */
 	char manufacturer[12];
@@ -291,19 +317,74 @@ struct nand_onfi_params {
 	__le16 io_pin_capacitance_typ;
 	__le16 input_pin_capacitance_typ;
 	u8 input_pin_capacitance_max;
-	u8 driver_strenght_support;
+	u8 driver_strength_support;
 	__le16 t_int_r;
 	__le16 t_ald;
 	u8 reserved4[7];
 
 	/* vendor */
-	u8 reserved5[90];
+	__le16 vendor_revision;
+	u8 vendor[88];
 
 	__le16 crc;
-} __attribute__((packed));
+} __packed;
 
 #define ONFI_CRC_BASE	0x4F4E
 
+/* Extended ECC information Block Definition (since ONFI 2.1) */
+struct onfi_ext_ecc_info {
+	u8 ecc_bits;
+	u8 codeword_size;
+	__le16 bb_per_lun;
+	__le16 block_endurance;
+	u8 reserved[2];
+} __packed;
+
+#define ONFI_SECTION_TYPE_0	0	/* Unused section. */
+#define ONFI_SECTION_TYPE_1	1	/* for additional sections. */
+#define ONFI_SECTION_TYPE_2	2	/* for ECC information. */
+struct onfi_ext_section {
+	u8 type;
+	u8 length;
+} __packed;
+
+#define ONFI_EXT_SECTION_MAX 8
+
+/* Extended Parameter Page Definition (since ONFI 2.1) */
+struct onfi_ext_param_page {
+	__le16 crc;
+	u8 sig[4];             /* 'E' 'P' 'P' 'S' */
+	u8 reserved0[10];
+	struct onfi_ext_section sections[ONFI_EXT_SECTION_MAX];
+
+	/*
+	 * The actual size of the Extended Parameter Page is in
+	 * @ext_param_page_length of nand_onfi_params{}.
+	 * The following are the variable length sections.
+	 * So we do not add any fields below. Please see the ONFI spec.
+	 */
+} __packed;
+
+struct nand_onfi_vendor_micron {
+	u8 two_plane_read;
+	u8 read_cache;
+	u8 read_unique_id;
+	u8 dq_imped;
+	u8 dq_imped_num_settings;
+	u8 dq_imped_feat_addr;
+	u8 rb_pulldown_strength;
+	u8 rb_pulldown_strength_feat_addr;
+	u8 rb_pulldown_strength_num_settings;
+	u8 otp_mode;
+	u8 otp_page_start;
+	u8 otp_data_prot_addr;
+	u8 otp_num_pages;
+	u8 otp_feat_addr;
+	u8 read_retry_options;
+	u8 reserved[72];
+	u8 param_revision;
+} __packed;
+
 /**
  * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
  * @lock:               protection lock
@@ -313,12 +394,11 @@ struct nand_onfi_params {
  *			when a hw controller is available.
  */
 struct nand_hw_control {
-/* XXX U-BOOT XXX */
-#if 0
-	spinlock_t	 lock;
+	spinlock_t lock;
+	struct nand_chip *active;
+#ifndef __UBOOT__
 	wait_queue_head_t wq;
 #endif
-	struct nand_chip *active;
 };
 
 /**
@@ -344,6 +424,7 @@ struct nand_hw_control {
  *		any single ECC step, 0 if bitflips uncorrectable, -EIO hw error
  * @read_subpage:	function to read parts of the page covered by ECC;
  *			returns same as read_page()
+ * @write_subpage:	function to write parts of the page covered by ECC.
  * @write_page:	function to write a page according to the ECC generator
  *		requirements.
  * @write_oob_raw:	function to write chip OOB data without ECC
@@ -375,6 +456,9 @@ struct nand_ecc_ctrl {
 			uint8_t *buf, int oob_required, int page);
 	int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
 			uint32_t offs, uint32_t len, uint8_t *buf);
+	int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
+			uint32_t offset, uint32_t data_len,
+			const uint8_t *data_buf, int oob_required);
 	int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
 			const uint8_t *buf, int oob_required);
 	int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
@@ -396,10 +480,16 @@ struct nand_ecc_ctrl {
  * consecutive order.
  */
 struct nand_buffers {
+#ifndef __UBOOT__
+	uint8_t	*ecccalc;
+	uint8_t	*ecccode;
+	uint8_t *databuf;
+#else
 	uint8_t	ecccalc[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)];
 	uint8_t	ecccode[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)];
 	uint8_t databuf[ALIGN(NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE,
 			      ARCH_DMA_MINALIGN)];
+#endif
 };
 
 /**
@@ -410,13 +500,13 @@ struct nand_buffers {
  *			flash device.
  * @read_byte:		[REPLACEABLE] read one byte from the chip
  * @read_word:		[REPLACEABLE] read one word from the chip
+ * @write_byte:		[REPLACEABLE] write a single byte to the chip on the
+ *			low 8 I/O lines
  * @write_buf:		[REPLACEABLE] write data from the buffer to the chip
  * @read_buf:		[REPLACEABLE] read data from the chip into the buffer
- * @verify_buf:		[REPLACEABLE] verify buffer contents against the chip
- *			data.
  * @select_chip:	[REPLACEABLE] select chip nr
- * @block_bad:		[REPLACEABLE] check, if the block is bad
- * @block_markbad:	[REPLACEABLE] mark the block bad
+ * @block_bad:		[REPLACEABLE] check if a block is bad, using OOB markers
+ * @block_markbad:	[REPLACEABLE] mark a block bad
  * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific function for controlling
  *			ALE/CLE/nCE. Also used to write command and address
  * @init_size:		[BOARDSPECIFIC] hardwarespecific function for setting
@@ -431,6 +521,8 @@ struct nand_buffers {
  *			commands to the chip.
  * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on
  *			ready.
+ * @setup_read_retry:	[FLASHSPECIFIC] flash (vendor) specific function for
+ *			setting the read-retry mode. Mostly needed for MLC NAND.
  * @ecc:		[BOARDSPECIFIC] ECC control structure
  * @buffers:		buffer structure for read/write
  * @hwcontrol:		platform-specific hardware control structure
@@ -458,7 +550,13 @@ struct nand_buffers {
  * @badblockbits:	[INTERN] minimum number of set bits in a good block's
  *			bad block marker position; i.e., BBM == 11110111b is
  *			not bad when badblockbits == 7
- * @cellinfo:		[INTERN] MLC/multichip data from chip ident
+ * @bits_per_cell:	[INTERN] number of bits per cell. i.e., 1 means SLC.
+ * @ecc_strength_ds:	[INTERN] ECC correctability from the datasheet.
+ *			Minimum amount of bit errors per @ecc_step_ds guaranteed
+ *			to be correctable. If unknown, set to zero.
+ * @ecc_step_ds:	[INTERN] ECC step required by the @ecc_strength_ds,
+ *                      also from the datasheet. It is the recommended ECC step
+ *			size, if known; if unknown, set to zero.
  * @numchips:		[INTERN] number of physical chips
  * @chipsize:		[INTERN] the size of one chip for multichip arrays
  * @pagemask:		[INTERN] page number mask = number of (pages / chip) - 1
@@ -471,9 +569,9 @@ struct nand_buffers {
  *			non 0 if ONFI supported.
  * @onfi_params:	[INTERN] holds the ONFI page parameter when ONFI is
  *			supported, 0 otherwise.
- * @onfi_set_features	[REPLACEABLE] set the features for ONFI nand
- * @onfi_get_features	[REPLACEABLE] get the features for ONFI nand
- * @ecclayout:		[REPLACEABLE] the default ECC placement scheme
+ * @read_retries:	[INTERN] the number of read retry modes supported
+ * @onfi_set_features:	[REPLACEABLE] set the features for ONFI nand
+ * @onfi_get_features:	[REPLACEABLE] get the features for ONFI nand
  * @bbt:		[INTERN] bad block table pointer
  * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash
  *			lookup.
@@ -496,9 +594,14 @@ struct nand_chip {
 
 	uint8_t (*read_byte)(struct mtd_info *mtd);
 	u16 (*read_word)(struct mtd_info *mtd);
+	void (*write_byte)(struct mtd_info *mtd, uint8_t byte);
 	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
 	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
-	int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+#ifdef __UBOOT__
+#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
+        int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+#endif
+#endif
 	void (*select_chip)(struct mtd_info *mtd, int chip);
 	int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
 	int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
@@ -514,12 +617,13 @@ struct nand_chip {
 	int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
 			int status, int page);
 	int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf, int oob_required, int page,
-			int cached, int raw);
+			uint32_t offset, int data_len, const uint8_t *buf,
+			int oob_required, int page, int cached, int raw);
 	int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
 			int feature_addr, uint8_t *subfeature_para);
 	int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
 			int feature_addr, uint8_t *subfeature_para);
+	int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode);
 
 	int chip_delay;
 	unsigned int options;
@@ -535,20 +639,26 @@ struct nand_chip {
 	int pagebuf;
 	unsigned int pagebuf_bitflips;
 	int subpagesize;
-	uint8_t cellinfo;
+	uint8_t bits_per_cell;
+	uint16_t ecc_strength_ds;
+	uint16_t ecc_step_ds;
 	int badblockpos;
 	int badblockbits;
 
 	int onfi_version;
 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION
-	struct nand_onfi_params onfi_params;
+	struct nand_onfi_params	onfi_params;
 #endif
 
-	int state;
+	int read_retries;
+
+	flstate_t state;
 
 	uint8_t *oob_poi;
 	struct nand_hw_control *controller;
+#ifdef __UBOOT__
 	struct nand_ecclayout *ecclayout;
+#endif
 
 	struct nand_ecc_ctrl ecc;
 	struct nand_buffers *buffers;
@@ -577,26 +687,83 @@ struct nand_chip {
 #define NAND_MFR_AMD		0x01
 #define NAND_MFR_MACRONIX	0xc2
 #define NAND_MFR_EON		0x92
+#define NAND_MFR_SANDISK	0x45
+#define NAND_MFR_INTEL		0x89
+
+/* The maximum expected count of bytes in the NAND ID sequence */
+#define NAND_MAX_ID_LEN 8
+
+/*
+ * A helper for defining older NAND chips where the second ID byte fully
+ * defined the chip, including the geometry (chip size, eraseblock size, page
+ * size). All these chips have 512 bytes NAND page size.
+ */
+#define LEGACY_ID_NAND(nm, devid, chipsz, erasesz, opts)          \
+	{ .name = (nm), {{ .dev_id = (devid) }}, .pagesize = 512, \
+	  .chipsize = (chipsz), .erasesize = (erasesz), .options = (opts) }
+
+/*
+ * A helper for defining newer chips which report their page size and
+ * eraseblock size via the extended ID bytes.
+ *
+ * The real difference between LEGACY_ID_NAND and EXTENDED_ID_NAND is that with
+ * EXTENDED_ID_NAND, manufacturers overloaded the same device ID so that the
+ * device ID now only represented a particular total chip size (and voltage,
+ * buswidth), and the page size, eraseblock size, and OOB size could vary while
+ * using the same device ID.
+ */
+#define EXTENDED_ID_NAND(nm, devid, chipsz, opts)                      \
+	{ .name = (nm), {{ .dev_id = (devid) }}, .chipsize = (chipsz), \
+	  .options = (opts) }
+
+#define NAND_ECC_INFO(_strength, _step)	\
+			{ .strength_ds = (_strength), .step_ds = (_step) }
+#define NAND_ECC_STRENGTH(type)		((type)->ecc.strength_ds)
+#define NAND_ECC_STEP(type)		((type)->ecc.step_ds)
 
 /**
  * struct nand_flash_dev - NAND Flash Device ID Structure
- * @name:	Identify the device type
- * @id:		device ID code
- * @pagesize:	Pagesize in bytes. Either 256 or 512 or 0
- *		If the pagesize is 0, then the real pagesize
- *		and the eraseize are determined from the
- *		extended id bytes in the chip
- * @erasesize:	Size of an erase block in the flash device.
- * @chipsize:	Total chipsize in Mega Bytes
- * @options:	Bitfield to store chip relevant options
+ * @name: a human-readable name of the NAND chip
+ * @dev_id: the device ID (the second byte of the full chip ID array)
+ * @mfr_id: manufecturer ID part of the full chip ID array (refers the same
+ *          memory address as @id[0])
+ * @dev_id: device ID part of the full chip ID array (refers the same memory
+ *          address as @id[1])
+ * @id: full device ID array
+ * @pagesize: size of the NAND page in bytes; if 0, then the real page size (as
+ *            well as the eraseblock size) is determined from the extended NAND
+ *            chip ID array)
+ * @chipsize: total chip size in MiB
+ * @erasesize: eraseblock size in bytes (determined from the extended ID if 0)
+ * @options: stores various chip bit options
+ * @id_len: The valid length of the @id.
+ * @oobsize: OOB size
+ * @ecc.strength_ds: The ECC correctability from the datasheet, same as the
+ *                   @ecc_strength_ds in nand_chip{}.
+ * @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the
+ *               @ecc_step_ds in nand_chip{}, also from the datasheet.
+ *               For example, the "4bit ECC for each 512Byte" can be set with
+ *               NAND_ECC_INFO(4, 512).
  */
 struct nand_flash_dev {
 	char *name;
-	int id;
-	unsigned long pagesize;
-	unsigned long chipsize;
-	unsigned long erasesize;
-	unsigned long options;
+	union {
+		struct {
+			uint8_t mfr_id;
+			uint8_t dev_id;
+		};
+		uint8_t id[NAND_MAX_ID_LEN];
+	};
+	unsigned int pagesize;
+	unsigned int chipsize;
+	unsigned int erasesize;
+	unsigned int options;
+	uint16_t id_len;
+	uint16_t oobsize;
+	struct {
+		uint16_t strength_ds;
+		uint16_t step_ds;
+	} ecc;
 };
 
 /**
@@ -609,23 +776,25 @@ struct nand_manufacturers {
 	char *name;
 };
 
-extern const struct nand_flash_dev nand_flash_ids[];
-extern const struct nand_manufacturers nand_manuf_ids[];
+extern struct nand_flash_dev nand_flash_ids[];
+extern struct nand_manufacturers nand_manuf_ids[];
 
 extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
-extern int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
 extern int nand_default_bbt(struct mtd_info *mtd);
+extern int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs);
 extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt);
 extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 			   int allowbbt);
 extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
 			size_t *retlen, uint8_t *buf);
 
+#ifdef __UBOOT__
 /*
 * Constants for oob configuration
 */
 #define NAND_SMALL_BADBLOCK_POS		5
 #define NAND_LARGE_BADBLOCK_POS		0
+#endif
 
 /**
  * struct platform_nand_chip - chip level device structure
@@ -656,20 +825,29 @@ struct platform_device;
 
 /**
  * struct platform_nand_ctrl - controller level device structure
+ * @probe:		platform specific function to probe/setup hardware
+ * @remove:		platform specific function to remove/teardown hardware
  * @hwcontrol:		platform specific hardware control structure
  * @dev_ready:		platform specific function to read ready/busy pin
  * @select_chip:	platform specific chip select function
  * @cmd_ctrl:		platform specific function for controlling
  *			ALE/CLE/nCE. Also used to write command and address
+ * @write_buf:		platform specific function for write buffer
+ * @read_buf:		platform specific function for read buffer
+ * @read_byte:		platform specific function to read one byte from chip
  * @priv:		private data to transport driver specific settings
  *
  * All fields are optional and depend on the hardware driver requirements
  */
 struct platform_nand_ctrl {
+	int (*probe)(struct platform_device *pdev);
+	void (*remove)(struct platform_device *pdev);
 	void (*hwcontrol)(struct mtd_info *mtd, int cmd);
 	int (*dev_ready)(struct mtd_info *mtd);
 	void (*select_chip)(struct mtd_info *mtd, int chip);
 	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
 	unsigned char (*read_byte)(struct mtd_info *mtd);
 	void *priv;
 };
@@ -693,16 +871,14 @@ struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd)
 	return chip->priv;
 }
 
-/* Standard NAND functions from nand_base.c */
-void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len);
-void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len);
-void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len);
-void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len);
-uint8_t nand_read_byte(struct mtd_info *mtd);
+#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
+/* return the supported features. */
+static inline int onfi_feature(struct nand_chip *chip)
+{
+	return chip->onfi_version ? le16_to_cpu(chip->onfi_params.features) : 0;
+}
 
 /* return the supported asynchronous timing mode. */
-
-#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
 static inline int onfi_get_async_timing_mode(struct nand_chip *chip)
 {
 	if (!chip->onfi_version)
@@ -719,4 +895,22 @@ static inline int onfi_get_sync_timing_mode(struct nand_chip *chip)
 }
 #endif
 
+/*
+ * Check if it is a SLC nand.
+ * The !nand_is_slc() can be used to check the MLC/TLC nand chips.
+ * We do not distinguish the MLC and TLC now.
+ */
+static inline bool nand_is_slc(struct nand_chip *chip)
+{
+	return chip->bits_per_cell == 1;
+}
+
+#ifdef __UBOOT__
+/* Standard NAND functions from nand_base.c */
+void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len);
+void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len);
+void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len);
+void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len);
+uint8_t nand_read_byte(struct mtd_info *mtd);
+#endif
 #endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index d1d9a96..ce0e8db 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -1,11 +1,9 @@
 /*
  * MTD partitioning layer definitions
  *
- * (C) 2000 Nicolas Pitre <nico at cam.org>
+ * (C) 2000 Nicolas Pitre <nico at fluxnic.net>
  *
  * This code is GPL
- *
- * $Id: partitions.h,v 1.17 2005/11/07 11:14:55 gleixner Exp $
  */
 
 #ifndef MTD_PARTITIONS_H
@@ -18,7 +16,7 @@
  * Partition definition structure:
  *
  * An array of struct partition is passed along with a MTD object to
- * add_mtd_partitions() to create them.
+ * mtd_device_register() to create them.
  *
  * For each partition, these fields are available:
  * name: string that will be used to label the partition's MTD device.
@@ -26,7 +24,9 @@
  * 	will extend to the end of the master MTD device.
  * offset: absolute starting position within the master MTD device; if
  * 	defined as MTDPART_OFS_APPEND, the partition will start where the
- * 	previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block.
+ *	previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block;
+ *	if MTDPART_OFS_RETAIN, consume as much as possible, leaving size
+ *	after the end of partition.
  * mask_flags: contains flags that have to be masked (removed) from the
  * 	master MTD flag set for the corresponding MTD partition.
  * 	For example, to force a read-only partition, simply adding
@@ -37,23 +37,34 @@
  */
 
 struct mtd_partition {
-	char *name;			/* identifier string */
+	const char *name;		/* identifier string */
 	uint64_t size;			/* partition size */
 	uint64_t offset;		/* offset within the master MTD space */
-	u_int32_t mask_flags;		/* master MTD flags to mask out for this partition */
-	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
-	struct mtd_info **mtdp;		/* pointer to store the MTD object */
+	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
+	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only) */
 };
 
+#define MTDPART_OFS_RETAIN	(-3)
 #define MTDPART_OFS_NXTBLK	(-2)
 #define MTDPART_OFS_APPEND	(-1)
 #define MTDPART_SIZ_FULL	(0)
 
 
-int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
-int del_mtd_partitions(struct mtd_info *);
+struct mtd_info;
+struct device_node;
+
+#ifndef __UBOOT__
+/**
+ * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
+ * @origin: for RedBoot, start address of MTD device
+ * @of_node: for OF parsers, device node containing partitioning information
+ */
+struct mtd_part_parser_data {
+	unsigned long origin;
+	struct device_node *of_node;
+};
+
 
-#if 0
 /*
  * Functions dealing with the various ways of partitioning the space
  */
@@ -62,23 +73,18 @@ struct mtd_part_parser {
 	struct list_head list;
 	struct module *owner;
 	const char *name;
-	int (*parse_fn)(struct mtd_info *, struct mtd_partition **, unsigned long);
+	int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
+			struct mtd_part_parser_data *);
 };
 
-extern int register_mtd_parser(struct mtd_part_parser *parser);
-extern int deregister_mtd_parser(struct mtd_part_parser *parser);
-extern int parse_mtd_partitions(struct mtd_info *master, const char **types,
-				struct mtd_partition **pparts, unsigned long origin);
-
-#define put_partition_parser(p) do { module_put((p)->owner); } while(0)
-
-struct device;
-struct device_node;
-
-int __devinit of_mtd_parse_partitions(struct device *dev,
-				      struct mtd_info *mtd,
-				      struct device_node *node,
-				      struct mtd_partition **pparts);
+extern void register_mtd_parser(struct mtd_part_parser *parser);
+extern void deregister_mtd_parser(struct mtd_part_parser *parser);
 #endif
 
+int mtd_is_partition(const struct mtd_info *mtd);
+int mtd_add_partition(struct mtd_info *master, const char *name,
+		      long long offset, long long length);
+int mtd_del_partition(struct mtd_info *master, int partno);
+uint64_t mtd_get_device_size(const struct mtd_info *mtd);
+
 #endif
diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h
index 4755770..d9e58ae 100644
--- a/include/linux/mtd/ubi.h
+++ b/include/linux/mtd/ubi.h
@@ -9,9 +9,15 @@
 #ifndef __LINUX_UBI_H__
 #define __LINUX_UBI_H__
 
-/* #include <asm/ioctl.h> */
 #include <linux/types.h>
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/ioctl.h>
 #include <mtd/ubi-user.h>
+#endif
+
+/* All voumes/LEBs */
+#define UBI_ALL -1
 
 /*
  * enum ubi_open_mode - UBI volume open mode constants.
@@ -33,13 +39,13 @@ enum {
  * @size: how many physical eraseblocks are reserved for this volume
  * @used_bytes: how many bytes of data this volume contains
  * @used_ebs: how many physical eraseblocks of this volume actually contain any
- * data
+ *            data
  * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
  * @corrupted: non-zero if the volume is corrupted (static volumes only)
  * @upd_marker: non-zero if the volume has update marker set
  * @alignment: volume alignment
  * @usable_leb_size: how many bytes are available in logical eraseblocks of
- * this volume
+ *                   this volume
  * @name_len: volume name length
  * @name: volume name
  * @cdev: UBI volume character device major and minor numbers
@@ -75,7 +81,7 @@ enum {
  * physical eraseblock size and on how much bytes UBI headers consume. But
  * because of the volume alignment (@alignment), the usable size of logical
  * eraseblocks if a volume may be less. The following equation is true:
- * 	@usable_leb_size = LEB size - (LEB size mod @alignment),
+ *	@usable_leb_size = LEB size - (LEB size mod @alignment),
  * where LEB size is the logical eraseblock size defined by the UBI device.
  *
  * The alignment is multiple to the minimal flash input/output unit size or %1
@@ -104,20 +110,79 @@ struct ubi_volume_info {
  * struct ubi_device_info - UBI device description data structure.
  * @ubi_num: ubi device number
  * @leb_size: logical eraseblock size on this UBI device
+ * @leb_start: starting offset of logical eraseblocks within physical
+ *             eraseblocks
  * @min_io_size: minimal I/O unit size
+ * @max_write_size: maximum amount of bytes the underlying flash can write at a
+ *                  time (MTD write buffer size)
  * @ro_mode: if this device is in read-only mode
  * @cdev: UBI character device major and minor numbers
  *
  * Note, @leb_size is the logical eraseblock size offered by the UBI device.
  * Volumes of this UBI device may have smaller logical eraseblock size if their
  * alignment is not equivalent to %1.
+ *
+ * The @max_write_size field describes flash write maximum write unit. For
+ * example, NOR flash allows for changing individual bytes, so @min_io_size is
+ * %1. However, it does not mean than NOR flash has to write data byte-by-byte.
+ * Instead, CFI NOR flashes have a write-buffer of, e.g., 64 bytes, and when
+ * writing large chunks of data, they write 64-bytes at a time. Obviously, this
+ * improves write throughput.
+ *
+ * Also, the MTD device may have N interleaved (striped) flash chips
+ * underneath, in which case @min_io_size can be physical min. I/O size of
+ * single flash chip, while @max_write_size can be N * @min_io_size.
+ *
+ * The @max_write_size field is always greater or equivalent to @min_io_size.
+ * E.g., some NOR flashes may have (@min_io_size = 1, @max_write_size = 64). In
+ * contrast, NAND flashes usually have @min_io_size = @max_write_size = NAND
+ * page size.
  */
 struct ubi_device_info {
 	int ubi_num;
 	int leb_size;
+	int leb_start;
 	int min_io_size;
+	int max_write_size;
 	int ro_mode;
+#ifndef __UBOOT__
 	dev_t cdev;
+#endif
+};
+
+/*
+ * Volume notification types.
+ * @UBI_VOLUME_ADDED: a volume has been added (an UBI device was attached or a
+ *                    volume was created)
+ * @UBI_VOLUME_REMOVED: a volume has been removed (an UBI device was detached
+ *			or a volume was removed)
+ * @UBI_VOLUME_RESIZED: a volume has been re-sized
+ * @UBI_VOLUME_RENAMED: a volume has been re-named
+ * @UBI_VOLUME_UPDATED: data has been written to a volume
+ *
+ * These constants define which type of event has happened when a volume
+ * notification function is invoked.
+ */
+enum {
+	UBI_VOLUME_ADDED,
+	UBI_VOLUME_REMOVED,
+	UBI_VOLUME_RESIZED,
+	UBI_VOLUME_RENAMED,
+	UBI_VOLUME_UPDATED,
+};
+
+/*
+ * struct ubi_notification - UBI notification description structure.
+ * @di: UBI device description object
+ * @vi: UBI volume description object
+ *
+ * UBI notifiers are called with a pointer to an object of this type. The
+ * object describes the notification. Namely, it provides a description of the
+ * UBI device and UBI volume the notification informs about.
+ */
+struct ubi_notification {
+	struct ubi_device_info di;
+	struct ubi_volume_info vi;
 };
 
 /* UBI descriptor given to users when they open UBI volumes */
@@ -129,17 +194,37 @@ void ubi_get_volume_info(struct ubi_volume_desc *desc,
 struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode);
 struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
 					   int mode);
+struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode);
+
+#ifndef __UBOOT__
+typedef	int (*notifier_fn_t)(void *nb,
+			unsigned long action, void *data);
+
+struct notifier_block {
+	notifier_fn_t notifier_call;
+	struct notifier_block *next;
+	void *next;
+	int priority;
+};
+
+int ubi_register_volume_notifier(struct notifier_block *nb,
+				 int ignore_existing);
+int ubi_unregister_volume_notifier(struct notifier_block *nb);
+#endif
+
 void ubi_close_volume(struct ubi_volume_desc *desc);
 int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
 		 int len, int check);
 int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
-		  int offset, int len, int dtype);
+		  int offset, int len);
 int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
-		   int len, int dtype);
+		   int len);
 int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum);
 int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum);
-int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype);
+int ubi_leb_map(struct ubi_volume_desc *desc, int lnum);
 int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum);
+int ubi_sync(int ubi_num);
+int ubi_flush(int ubi_num, int vol_id, int lnum);
 
 /*
  * This function is the same as the 'ubi_leb_read()' function, but it does not
@@ -150,25 +235,4 @@ static inline int ubi_read(struct ubi_volume_desc *desc, int lnum, char *buf,
 {
 	return ubi_leb_read(desc, lnum, buf, offset, len, 0);
 }
-
-/*
- * This function is the same as the 'ubi_leb_write()' functions, but it does
- * not have the data type argument.
- */
-static inline int ubi_write(struct ubi_volume_desc *desc, int lnum,
-			    const void *buf, int offset, int len)
-{
-	return ubi_leb_write(desc, lnum, buf, offset, len, UBI_UNKNOWN);
-}
-
-/*
- * This function is the same as the 'ubi_leb_change()' functions, but it does
- * not have the data type argument.
- */
-static inline int ubi_change(struct ubi_volume_desc *desc, int lnum,
-				    const void *buf, int len)
-{
-	return ubi_leb_change(desc, lnum, buf, len, UBI_UNKNOWN);
-}
-
 #endif /* !__LINUX_UBI_H__ */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index a8a5763..9bccd45 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -19,6 +19,7 @@
 #define __LINUX_USB_GADGET_H
 
 #include <errno.h>
+#include <linux/compat.h>
 #include <linux/list.h>
 
 struct usb_ep;
@@ -410,11 +411,6 @@ struct usb_gadget_ops {
 				unsigned code, unsigned long param);
 };
 
-struct device {
-	void		*driver_data;	/* data private to the driver */
-	void            *device_data;   /* data private to the device */
-};
-
 /**
  * struct usb_gadget - represents a usb slave device
  * @ops: Function pointers used to access hardware-specific operations.
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index ac3c298..f9dca2a 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -1,30 +1,56 @@
 /*
- * $Id: mtd-abi.h,v 1.13 2005/11/07 11:14:56 gleixner Exp $
+ * Copyright © 1999-2010 David Woodhouse <dwmw2 at infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  *
- * Portions of MTD ABI definition which are shared by kernel and user space
  */
 
 #ifndef __MTD_ABI_H__
 #define __MTD_ABI_H__
 
-#if 1
+#define __UBOOT__
+#ifdef __UBOOT__
 #include <linux/compat.h>
 #endif
 
 #include <linux/compiler.h>
 
 struct erase_info_user {
-	uint32_t start;
-	uint32_t length;
+	__u32 start;
+	__u32 length;
+};
+
+struct erase_info_user64 {
+	__u64 start;
+	__u64 length;
 };
 
 struct mtd_oob_buf {
-	uint32_t start;
-	uint32_t length;
+	__u32 start;
+	__u32 length;
 	unsigned char __user *ptr;
 };
 
-/*
+struct mtd_oob_buf64 {
+	__u64 start;
+	__u32 pad;
+	__u32 length;
+	__u64 usr_ptr;
+};
+
+/**
  * MTD operation modes
  *
  * @MTD_OPS_PLACE_OOB:	OOB data are placed at the given offset (default)
@@ -43,18 +69,45 @@ enum {
 	MTD_OPS_RAW = 2,
 };
 
+/**
+ * struct mtd_write_req - data structure for requesting a write operation
+ *
+ * @start:	start address
+ * @len:	length of data buffer
+ * @ooblen:	length of OOB buffer
+ * @usr_data:	user-provided data buffer
+ * @usr_oob:	user-provided OOB buffer
+ * @mode:	MTD mode (see "MTD operation modes")
+ * @padding:	reserved, must be set to 0
+ *
+ * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB
+ * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to
+ * write data-only, set @usr_oob == NULL. However, setting both @usr_data and
+ * @usr_oob to NULL is not allowed.
+ */
+struct mtd_write_req {
+	__u64 start;
+	__u64 len;
+	__u64 ooblen;
+	__u64 usr_data;
+	__u64 usr_oob;
+	__u8 mode;
+	__u8 padding[7];
+};
+
 #define MTD_ABSENT		0
 #define MTD_RAM			1
 #define MTD_ROM			2
 #define MTD_NORFLASH		3
-#define MTD_NANDFLASH		4
+#define MTD_NANDFLASH		4	/* SLC NAND */
 #define MTD_DATAFLASH		6
 #define MTD_UBIVOLUME		7
+#define MTD_MLCNANDFLASH	8	/* MLC NAND (including TLC) */
 
 #define MTD_WRITEABLE		0x400	/* Device is writeable */
 #define MTD_BIT_WRITEABLE	0x800	/* Single bits can be flipped */
 #define MTD_NO_ERASE		0x1000	/* No erase necessary */
-#define MTD_STUPID_LOCK		0x2000	/* Always locked after reset */
+#define MTD_POWERUP_LOCK	0x2000	/* Always locked after reset */
 
 /* Some common devices / combinations of capabilities */
 #define MTD_CAP_ROM		0
@@ -62,12 +115,12 @@ enum {
 #define MTD_CAP_NORFLASH	(MTD_WRITEABLE | MTD_BIT_WRITEABLE)
 #define MTD_CAP_NANDFLASH	(MTD_WRITEABLE)
 
-/* ECC byte placement */
-#define MTD_NANDECC_OFF		0	/* Switch off ECC (Not recommended) */
-#define MTD_NANDECC_PLACE	1	/* Use the given placement in the structure (YAFFS1 legacy mode) */
-#define MTD_NANDECC_AUTOPLACE	2	/* Use the default placement scheme */
-#define MTD_NANDECC_PLACEONLY	3	/* Use the given placement in the structure (Do not store ecc result on read) */
-#define MTD_NANDECC_AUTOPL_USR	4	/* Use the given autoplacement scheme rather than using the default */
+/* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */
+#define MTD_NANDECC_OFF		0	// Switch off ECC (Not recommended)
+#define MTD_NANDECC_PLACE	1	// Use the given placement in the structure (YAFFS1 legacy mode)
+#define MTD_NANDECC_AUTOPLACE	2	// Use the default placement scheme
+#define MTD_NANDECC_PLACEONLY	3	// Use the given placement in the structure (Do not store ecc result on read)
+#define MTD_NANDECC_AUTOPL_USR 	4	// Use the given autoplacement scheme rather than using the default
 
 /* OTP mode selection */
 #define MTD_OTP_OFF		0
@@ -75,32 +128,35 @@ enum {
 #define MTD_OTP_USER		2
 
 struct mtd_info_user {
-	uint8_t type;
-	uint32_t flags;
-	uint32_t size;			/* Total size of the MTD */
-	uint32_t erasesize;
-	uint32_t writesize;
-	uint32_t oobsize;		/* Amount of OOB data per block (e.g. 16) */
-	/* The below two fields are obsolete and broken, do not use them
-	 * (TODO: remove at some point) */
-	uint32_t ecctype;
-	uint32_t eccsize;
+	__u8 type;
+	__u32 flags;
+	__u32 size;	/* Total size of the MTD */
+	__u32 erasesize;
+	__u32 writesize;
+	__u32 oobsize;	/* Amount of OOB data per block (e.g. 16) */
+	__u64 padding;	/* Old obsolete field; do not use */
 };
 
 struct region_info_user {
-	uint32_t offset;		/* At which this region starts,
-					 * from the beginning of the MTD */
-	uint32_t erasesize;		/* For this region */
-	uint32_t numblocks;		/* Number of blocks in this region */
-	uint32_t regionindex;
+	__u32 offset;		/* At which this region starts,
+				 * from the beginning of the MTD */
+	__u32 erasesize;	/* For this region */
+	__u32 numblocks;	/* Number of blocks in this region */
+	__u32 regionindex;
 };
 
 struct otp_info {
-	uint32_t start;
-	uint32_t length;
-	uint32_t locked;
+	__u32 start;
+	__u32 length;
+	__u32 locked;
 };
 
+/*
+ * Note, the following ioctl existed in the past and was removed:
+ * #define MEMSETOOBSEL           _IOW('M', 9, struct nand_oobinfo)
+ * Try to avoid adding a new ioctl with the same ioctl number.
+ */
+
 /* Get basic MTD characteristics info (better to use sysfs) */
 #define MEMGETINFO		_IOR('M', 1, struct mtd_info_user)
 /* Erase segment of MTD */
@@ -118,12 +174,11 @@ struct otp_info {
 /* Get information about the erase region for a specific index */
 #define MEMGETREGIONINFO	_IOWR('M', 8, struct region_info_user)
 /* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */
-#define MEMSETOOBSEL		_IOW('M', 9, struct nand_oobinfo)
 #define MEMGETOOBSEL		_IOR('M', 10, struct nand_oobinfo)
 /* Check if an eraseblock is bad */
-#define MEMGETBADBLOCK		_IOW('M', 11, loff_t)
+#define MEMGETBADBLOCK		_IOW('M', 11, __kernel_loff_t)
 /* Mark an eraseblock as bad */
-#define MEMSETBADBLOCK		_IOW('M', 12, loff_t)
+#define MEMSETBADBLOCK		_IOW('M', 12, __kernel_loff_t)
 /* Set OTP (One-Time Programmable) mode (factory vs. user) */
 #define OTPSELECT		_IOR('M', 13, int)
 /* Get number of OTP (One-Time Programmable) regions */
@@ -133,26 +188,57 @@ struct otp_info {
 /* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
 #define OTPLOCK			_IOR('M', 16, struct otp_info)
 /* Get ECC layout (deprecated) */
-#define ECCGETLAYOUT		_IOR('M', 17, struct nand_ecclayout)
+#define ECCGETLAYOUT		_IOR('M', 17, struct nand_ecclayout_user)
 /* Get statistics about corrected/uncorrected errors */
 #define ECCGETSTATS		_IOR('M', 18, struct mtd_ecc_stats)
 /* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */
 #define MTDFILEMODE		_IO('M', 19)
+/* Erase segment of MTD (supports 64-bit address) */
+#define MEMERASE64		_IOW('M', 20, struct erase_info_user64)
+/* Write data to OOB (64-bit version) */
+#define MEMWRITEOOB64		_IOWR('M', 21, struct mtd_oob_buf64)
+/* Read data from OOB (64-bit version) */
+#define MEMREADOOB64		_IOWR('M', 22, struct mtd_oob_buf64)
+/* Check if chip is locked (for MTD that supports it) */
+#define MEMISLOCKED		_IOR('M', 23, struct erase_info_user)
+/*
+ * Most generic write interface; can write in-band and/or out-of-band in various
+ * modes (see "struct mtd_write_req"). This ioctl is not supported for flashes
+ * without OOB, e.g., NOR flash.
+ */
+#define MEMWRITE		_IOWR('M', 24, struct mtd_write_req)
 
 /*
  * Obsolete legacy interface. Keep it in order not to break userspace
  * interfaces
  */
 struct nand_oobinfo {
-	uint32_t useecc;
-	uint32_t eccbytes;
-	uint32_t oobfree[8][2];
-	uint32_t eccpos[48];
+	__u32 useecc;
+	__u32 eccbytes;
+	__u32 oobfree[8][2];
+	__u32 eccpos[32];
 };
 
 struct nand_oobfree {
-	uint32_t offset;
-	uint32_t length;
+	__u32 offset;
+	__u32 length;
+};
+
+#define MTD_MAX_OOBFREE_ENTRIES	8
+#define MTD_MAX_ECCPOS_ENTRIES	64
+/*
+ * OBSOLETE: ECC layout control structure. Exported to user-space via ioctl
+ * ECCGETLAYOUT for backwards compatbility and should not be mistaken as a
+ * complete set of ECC information. The ioctl truncates the larger internal
+ * structure to retain binary compatibility with the static declaration of the
+ * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of
+ * the user struct, not the MAX size of the internal struct nand_ecclayout.
+ */
+struct nand_ecclayout_user {
+	__u32 eccbytes;
+	__u32 eccpos[MTD_MAX_ECCPOS_ENTRIES];
+	__u32 oobavail;
+	struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
 };
 
 /**
@@ -164,10 +250,10 @@ struct nand_oobfree {
  * @bbtblocks:	number of blocks reserved for bad block tables
  */
 struct mtd_ecc_stats {
-	uint32_t corrected;
-	uint32_t failed;
-	uint32_t badblocks;
-	uint32_t bbtblocks;
+	__u32 corrected;
+	__u32 failed;
+	__u32 badblocks;
+	__u32 bbtblocks;
 };
 
 /*
@@ -188,10 +274,15 @@ struct mtd_ecc_stats {
  * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)).
  */
 enum mtd_file_modes {
-	MTD_MODE_NORMAL = MTD_OTP_OFF,
-	MTD_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
-	MTD_MODE_OTP_USER = MTD_OTP_USER,
-	MTD_MODE_RAW,
+	MTD_FILE_MODE_NORMAL = MTD_OTP_OFF,
+	MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
+	MTD_FILE_MODE_OTP_USER = MTD_OTP_USER,
+	MTD_FILE_MODE_RAW,
 };
 
+static inline int mtd_type_is_nand_user(const struct mtd_info_user *mtd)
+{
+	return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH;
+}
+
 #endif /* __MTD_ABI_H__ */
diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h
index 1ccc06e..c93914a 100644
--- a/include/mtd/ubi-user.h
+++ b/include/mtd/ubi-user.h
@@ -1,7 +1,7 @@
 /*
- * Copyright (c) International Business Machines Corp., 2006
+ * Copyright © International Business Machines Corp., 2006
  *
- * SPDX-License-Identifier:	GPL-2.0+
+ * SPDX-License-Identifier:    GPL-2.0+
  *
  * Author: Artem Bityutskiy (Битюцкий Артём)
  */
@@ -9,6 +9,8 @@
 #ifndef __UBI_USER_H__
 #define __UBI_USER_H__
 
+#include <linux/types.h>
+
 /*
  * UBI device creation (the same as MTD device attachment)
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -28,30 +30,37 @@
  * UBI volume creation
  * ~~~~~~~~~~~~~~~~~~~
  *
- * UBI volumes are created via the %UBI_IOCMKVOL IOCTL command of UBI character
+ * UBI volumes are created via the %UBI_IOCMKVOL ioctl command of UBI character
  * device. A &struct ubi_mkvol_req object has to be properly filled and a
- * pointer to it has to be passed to the IOCTL.
+ * pointer to it has to be passed to the ioctl.
  *
  * UBI volume deletion
  * ~~~~~~~~~~~~~~~~~~~
  *
- * To delete a volume, the %UBI_IOCRMVOL IOCTL command of the UBI character
+ * To delete a volume, the %UBI_IOCRMVOL ioctl command of the UBI character
  * device should be used. A pointer to the 32-bit volume ID hast to be passed
- * to the IOCTL.
+ * to the ioctl.
  *
  * UBI volume re-size
  * ~~~~~~~~~~~~~~~~~~
  *
- * To re-size a volume, the %UBI_IOCRSVOL IOCTL command of the UBI character
+ * To re-size a volume, the %UBI_IOCRSVOL ioctl command of the UBI character
  * device should be used. A &struct ubi_rsvol_req object has to be properly
- * filled and a pointer to it has to be passed to the IOCTL.
+ * filled and a pointer to it has to be passed to the ioctl.
+ *
+ * UBI volumes re-name
+ * ~~~~~~~~~~~~~~~~~~~
+ *
+ * To re-name several volumes atomically at one go, the %UBI_IOCRNVOL command
+ * of the UBI character device should be used. A &struct ubi_rnvol_req object
+ * has to be properly filled and a pointer to it has to be passed to the ioctl.
  *
  * UBI volume update
  * ~~~~~~~~~~~~~~~~~
  *
- * Volume update should be done via the %UBI_IOCVOLUP IOCTL command of the
+ * Volume update should be done via the %UBI_IOCVOLUP ioctl command of the
  * corresponding UBI volume character device. A pointer to a 64-bit update
- * size should be passed to the IOCTL. After this, UBI expects user to write
+ * size should be passed to the ioctl. After this, UBI expects user to write
  * this number of bytes to the volume character device. The update is finished
  * when the claimed number of bytes is passed. So, the volume update sequence
  * is something like:
@@ -61,14 +70,58 @@
  * write(fd, buf, image_size);
  * close(fd);
  *
- * Atomic eraseblock change
+ * Logical eraseblock erase
+ * ~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To erase a logical eraseblock, the %UBI_IOCEBER ioctl command of the
+ * corresponding UBI volume character device should be used. This command
+ * unmaps the requested logical eraseblock, makes sure the corresponding
+ * physical eraseblock is successfully erased, and returns.
+ *
+ * Atomic logical eraseblock change
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * Atomic logical eraseblock change operation is called using the %UBI_IOCEBCH
+ * ioctl command of the corresponding UBI volume character device. A pointer to
+ * a &struct ubi_leb_change_req object has to be passed to the ioctl. Then the
+ * user is expected to write the requested amount of bytes (similarly to what
+ * should be done in case of the "volume update" ioctl).
+ *
+ * Logical eraseblock map
+ * ~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To map a logical eraseblock to a physical eraseblock, the %UBI_IOCEBMAP
+ * ioctl command should be used. A pointer to a &struct ubi_map_req object is
+ * expected to be passed. The ioctl maps the requested logical eraseblock to
+ * a physical eraseblock and returns.  Only non-mapped logical eraseblocks can
+ * be mapped. If the logical eraseblock specified in the request is already
+ * mapped to a physical eraseblock, the ioctl fails and returns error.
+ *
+ * Logical eraseblock unmap
  * ~~~~~~~~~~~~~~~~~~~~~~~~
  *
- * Atomic eraseblock change operation is done via the %UBI_IOCEBCH IOCTL
- * command of the corresponding UBI volume character device. A pointer to
- * &struct ubi_leb_change_req has to be passed to the IOCTL. Then the user is
- * expected to write the requested amount of bytes. This is similar to the
- * "volume update" IOCTL.
+ * To unmap a logical eraseblock to a physical eraseblock, the %UBI_IOCEBUNMAP
+ * ioctl command should be used. The ioctl unmaps the logical eraseblocks,
+ * schedules corresponding physical eraseblock for erasure, and returns. Unlike
+ * the "LEB erase" command, it does not wait for the physical eraseblock being
+ * erased. Note, the side effect of this is that if an unclean reboot happens
+ * after the unmap ioctl returns, you may find the LEB mapped again to the same
+ * physical eraseblock after the UBI is run again.
+ *
+ * Check if logical eraseblock is mapped
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To check if a logical eraseblock is mapped to a physical eraseblock, the
+ * %UBI_IOCEBISMAP ioctl command should be used. It returns %0 if the LEB is
+ * not mapped, and %1 if it is mapped.
+ *
+ * Set an UBI volume property
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To set an UBI volume property the %UBI_IOCSETPROP ioctl command should be
+ * used. A pointer to a &struct ubi_set_vol_prop_req object is expected to be
+ * passed. The object describes which property should be set, and to which value
+ * it should be set.
  */
 
 /*
@@ -82,56 +135,56 @@
 /* Maximum volume name length */
 #define UBI_MAX_VOLUME_NAME 127
 
-/* IOCTL commands of UBI character devices */
+/* ioctl commands of UBI character devices */
 
 #define UBI_IOC_MAGIC 'o'
 
 /* Create an UBI volume */
 #define UBI_IOCMKVOL _IOW(UBI_IOC_MAGIC, 0, struct ubi_mkvol_req)
 /* Remove an UBI volume */
-#define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, int32_t)
+#define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, __s32)
 /* Re-size an UBI volume */
 #define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req)
+/* Re-name volumes */
+#define UBI_IOCRNVOL _IOW(UBI_IOC_MAGIC, 3, struct ubi_rnvol_req)
 
-/* IOCTL commands of the UBI control character device */
+/* ioctl commands of the UBI control character device */
 
 #define UBI_CTRL_IOC_MAGIC 'o'
 
 /* Attach an MTD device */
 #define UBI_IOCATT _IOW(UBI_CTRL_IOC_MAGIC, 64, struct ubi_attach_req)
 /* Detach an MTD device */
-#define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, int32_t)
+#define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, __s32)
 
-/* IOCTL commands of UBI volume character devices */
+/* ioctl commands of UBI volume character devices */
 
 #define UBI_VOL_IOC_MAGIC 'O'
 
-/* Start UBI volume update */
-#define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, int64_t)
-/* An eraseblock erasure command, used for debugging, disabled by default */
-#define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t)
-/* An atomic eraseblock change command */
-#define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t)
+/* Start UBI volume update
+ * Note: This actually takes a pointer (__s64*), but we can't change
+ *       that without breaking the ABI on 32bit systems
+ */
+#define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, __s64)
+/* LEB erasure command, used for debugging, disabled by default */
+#define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, __s32)
+/* Atomic LEB change command */
+#define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, __s32)
+/* Map LEB command */
+#define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req)
+/* Unmap LEB command */
+#define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, __s32)
+/* Check if LEB is mapped command */
+#define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, __s32)
+/* Set an UBI volume property */
+#define UBI_IOCSETVOLPROP _IOW(UBI_VOL_IOC_MAGIC, 6, \
+			       struct ubi_set_vol_prop_req)
 
 /* Maximum MTD device name length supported by UBI */
 #define MAX_UBI_MTD_NAME_LEN 127
 
-/*
- * UBI data type hint constants.
- *
- * UBI_LONGTERM: long-term data
- * UBI_SHORTTERM: short-term data
- * UBI_UNKNOWN: data persistence is unknown
- *
- * These constants are used when data is written to UBI volumes in order to
- * help the UBI wear-leveling unit to find more appropriate physical
- * eraseblocks.
- */
-enum {
-	UBI_LONGTERM  = 1,
-	UBI_SHORTTERM = 2,
-	UBI_UNKNOWN   = 3,
-};
+/* Maximum amount of UBI volumes that can be re-named at one go */
+#define UBI_MAX_RNVOL 32
 
 /*
  * UBI volume type constants.
@@ -144,11 +197,23 @@ enum {
 	UBI_STATIC_VOLUME  = 4,
 };
 
+/*
+ * UBI set volume property ioctl constants.
+ *
+ * @UBI_VOL_PROP_DIRECT_WRITE: allow (any non-zero value) or disallow (value 0)
+ *                             user to directly write and erase individual
+ *                             eraseblocks on dynamic volumes
+ */
+enum {
+	UBI_VOL_PROP_DIRECT_WRITE = 1,
+};
+
 /**
  * struct ubi_attach_req - attach MTD device request.
  * @ubi_num: UBI device number to create
  * @mtd_num: MTD device number to attach
  * @vid_hdr_offset: VID header offset (use defaults if %0)
+ * @max_beb_per1024: maximum expected number of bad PEB per 1024 PEBs
  * @padding: reserved for future, not used, has to be zeroed
  *
  * This data structure is used to specify MTD device UBI has to attach and the
@@ -164,20 +229,33 @@ enum {
  * it will be 512 in case of a 2KiB page NAND flash with 4 512-byte sub-pages.
  *
  * But in rare cases, if this optimizes things, the VID header may be placed to
- * a different offset. For example, the boot-loader might do things faster if the
- * VID header sits at the end of the first 2KiB NAND page with 4 sub-pages. As
- * the boot-loader would not normally need to read EC headers (unless it needs
- * UBI in RW mode), it might be faster to calculate ECC. This is weird example,
- * but it real-life example. So, in this example, @vid_hdr_offer would be
- * 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
- * aligned, which is OK, as UBI is clever enough to realize this is 4th sub-page
- * of the first page and add needed padding.
+ * a different offset. For example, the boot-loader might do things faster if
+ * the VID header sits at the end of the first 2KiB NAND page with 4 sub-pages.
+ * As the boot-loader would not normally need to read EC headers (unless it
+ * needs UBI in RW mode), it might be faster to calculate ECC. This is weird
+ * example, but it real-life example. So, in this example, @vid_hdr_offer would
+ * be 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
+ * aligned, which is OK, as UBI is clever enough to realize this is 4th
+ * sub-page of the first page and add needed padding.
+ *
+ * The @max_beb_per1024 is the maximum amount of bad PEBs UBI expects on the
+ * UBI device per 1024 eraseblocks.  This value is often given in an other form
+ * in the NAND datasheet (min NVB i.e. minimal number of valid blocks). The
+ * maximum expected bad eraseblocks per 1024 is then:
+ *    1024 * (1 - MinNVB / MaxNVB)
+ * Which gives 20 for most NAND devices.  This limit is used in order to derive
+ * amount of eraseblock UBI reserves for handling new bad blocks. If the device
+ * has more bad eraseblocks than this limit, UBI does not reserve any physical
+ * eraseblocks for new bad eraseblocks, but attempts to use available
+ * eraseblocks (if any). The accepted range is 0-768. If 0 is given, the
+ * default kernel value of %CONFIG_MTD_UBI_BEB_LIMIT will be used.
  */
 struct ubi_attach_req {
-	int32_t ubi_num;
-	int32_t mtd_num;
-	int32_t vid_hdr_offset;
-	uint8_t padding[12];
+	__s32 ubi_num;
+	__s32 mtd_num;
+	__s32 vid_hdr_offset;
+	__s16 max_beb_per1024;
+	__s8 padding[10];
 };
 
 /**
@@ -212,15 +290,15 @@ struct ubi_attach_req {
  * BLOBs, without caring about how to properly align them.
  */
 struct ubi_mkvol_req {
-	int32_t vol_id;
-	int32_t alignment;
-	int64_t bytes;
-	int8_t vol_type;
-	int8_t padding1;
-	int16_t name_len;
-	int8_t padding2[4];
+	__s32 vol_id;
+	__s32 alignment;
+	__s64 bytes;
+	__s8 vol_type;
+	__s8 padding1;
+	__s16 name_len;
+	__s8 padding2[4];
 	char name[UBI_MAX_VOLUME_NAME + 1];
-} __attribute__ ((packed));
+} __packed;
 
 /**
  * struct ubi_rsvol_req - a data structure used in volume re-size requests.
@@ -229,28 +307,105 @@ struct ubi_mkvol_req {
  *
  * Re-sizing is possible for both dynamic and static volumes. But while dynamic
  * volumes may be re-sized arbitrarily, static volumes cannot be made to be
- * smaller then the number of bytes they bear. To arbitrarily shrink a static
+ * smaller than the number of bytes they bear. To arbitrarily shrink a static
  * volume, it must be wiped out first (by means of volume update operation with
  * zero number of bytes).
  */
 struct ubi_rsvol_req {
-	int64_t bytes;
-	int32_t vol_id;
-} __attribute__ ((packed));
+	__s64 bytes;
+	__s32 vol_id;
+} __packed;
 
 /**
- * struct ubi_leb_change_req - a data structure used in atomic logical
- *                             eraseblock change requests.
+ * struct ubi_rnvol_req - volumes re-name request.
+ * @count: count of volumes to re-name
+ * @padding1:  reserved for future, not used, has to be zeroed
+ * @vol_id: ID of the volume to re-name
+ * @name_len: name length
+ * @padding2:  reserved for future, not used, has to be zeroed
+ * @name: new volume name
+ *
+ * UBI allows to re-name up to %32 volumes at one go. The count of volumes to
+ * re-name is specified in the @count field. The ID of the volumes to re-name
+ * and the new names are specified in the @vol_id and @name fields.
+ *
+ * The UBI volume re-name operation is atomic, which means that should power cut
+ * happen, the volumes will have either old name or new name. So the possible
+ * use-cases of this command is atomic upgrade. Indeed, to upgrade, say, volumes
+ * A and B one may create temporary volumes %A1 and %B1 with the new contents,
+ * then atomically re-name A1->A and B1->B, in which case old %A and %B will
+ * be removed.
+ *
+ * If it is not desirable to remove old A and B, the re-name request has to
+ * contain 4 entries: A1->A, A->A1, B1->B, B->B1, in which case old A1 and B1
+ * become A and B, and old A and B will become A1 and B1.
+ *
+ * It is also OK to request: A1->A, A1->X, B1->B, B->Y, in which case old A1
+ * and B1 become A and B, and old A and B become X and Y.
+ *
+ * In other words, in case of re-naming into an existing volume name, the
+ * existing volume is removed, unless it is re-named as well at the same
+ * re-name request.
+ */
+struct ubi_rnvol_req {
+	__s32 count;
+	__s8 padding1[12];
+	struct {
+		__s32 vol_id;
+		__s16 name_len;
+		__s8  padding2[2];
+		char    name[UBI_MAX_VOLUME_NAME + 1];
+	} ents[UBI_MAX_RNVOL];
+} __packed;
+
+/**
+ * struct ubi_leb_change_req - a data structure used in atomic LEB change
+ *                             requests.
  * @lnum: logical eraseblock number to change
  * @bytes: how many bytes will be written to the logical eraseblock
- * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN)
+ * @dtype: pass "3" for better compatibility with old kernels
  * @padding: reserved for future, not used, has to be zeroed
+ *
+ * The @dtype field used to inform UBI about what kind of data will be written
+ * to the LEB: long term (value 1), short term (value 2), unknown (value 3).
+ * UBI tried to pick a PEB with lower erase counter for short term data and a
+ * PEB with higher erase counter for long term data. But this was not really
+ * used because users usually do not know this and could easily mislead UBI. We
+ * removed this feature in May 2012. UBI currently just ignores the @dtype
+ * field. But for better compatibility with older kernels it is recommended to
+ * set @dtype to 3 (unknown).
  */
 struct ubi_leb_change_req {
-	int32_t lnum;
-	int32_t bytes;
-	uint8_t dtype;
-	uint8_t padding[7];
-} __attribute__ ((packed));
+	__s32 lnum;
+	__s32 bytes;
+	__s8  dtype; /* obsolete, do not use! */
+	__s8  padding[7];
+} __packed;
+
+/**
+ * struct ubi_map_req - a data structure used in map LEB requests.
+ * @dtype: pass "3" for better compatibility with old kernels
+ * @lnum: logical eraseblock number to unmap
+ * @padding: reserved for future, not used, has to be zeroed
+ */
+struct ubi_map_req {
+	__s32 lnum;
+	__s8  dtype; /* obsolete, do not use! */
+	__s8  padding[3];
+} __packed;
+
+
+/**
+ * struct ubi_set_vol_prop_req - a data structure used to set an UBI volume
+ *                               property.
+ * @property: property to set (%UBI_VOL_PROP_DIRECT_WRITE)
+ * @padding: reserved for future, not used, has to be zeroed
+ * @value: value to set
+ */
+struct ubi_set_vol_prop_req {
+	__u8  property;
+	__u8  padding[7];
+	__u64 value;
+}  __packed;
 
 #endif /* __UBI_USER_H__ */
diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h
index 7f72022..904b822 100644
--- a/include/ubi_uboot.h
+++ b/include/ubi_uboot.h
@@ -16,6 +16,7 @@
 
 #include <common.h>
 #include <compiler.h>
+#include <linux/compat.h>
 #include <malloc.h>
 #include <div64.h>
 #include <linux/crc32.h>
@@ -32,15 +33,11 @@
 
 #include <asm/errno.h>
 
-#define DPRINTK(format, args...)					\
-do {									\
-	printf("%s[%d]: " format "\n", __func__, __LINE__, ##args);	\
-} while (0)
-
 /* configurable */
+#if !defined(CONFIG_MTD_UBI_WL_THRESHOLD)
 #define CONFIG_MTD_UBI_WL_THRESHOLD	4096
+#endif
 #define CONFIG_MTD_UBI_BEB_RESERVE	1
-#define UBI_IO_DEBUG			0
 
 /* debug options (Linux: drivers/mtd/ubi/Kconfig.debug) */
 #undef CONFIG_MTD_UBI_DEBUG
@@ -50,161 +47,18 @@ do {									\
 #undef CONFIG_MTD_UBI_DEBUG_MSG_WL
 #undef CONFIG_MTD_UBI_DEBUG_MSG_IO
 #undef CONFIG_MTD_UBI_DEBUG_MSG_BLD
-#define CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
+
+#undef CONFIG_MTD_UBI_BLOCK
+
+#if !defined(CONFIG_MTD_UBI_BEB_LIMIT)
+#define CONFIG_MTD_UBI_BEB_LIMIT	20
+#endif
 
 /* build.c */
 #define get_device(...)
 #define put_device(...)
 #define ubi_sysfs_init(...)		0
 #define ubi_sysfs_close(...)		do { } while (0)
-static inline int is_power_of_2(unsigned long n)
-{
-	return (n != 0 && ((n & (n - 1)) == 0));
-}
-
-/* FIXME */
-#define MKDEV(...)			0
-#define MAJOR(dev)			0
-#define MINOR(dev)			0
-
-#define alloc_chrdev_region(...)	0
-#define unregister_chrdev_region(...)
-
-#define class_create(...)		__builtin_return_address(0)
-#define class_create_file(...)		0
-#define class_remove_file(...)
-#define class_destroy(...)
-#define misc_register(...)		0
-#define misc_deregister(...)
-
-/* vmt.c */
-#define device_register(...)		0
-#define volume_sysfs_init(...)		0
-#define volume_sysfs_close(...)		do { } while (0)
-
-/* kapi.c */
-
-/* eba.c */
-
-/* io.c */
-#define init_waitqueue_head(...)	do { } while (0)
-#define wait_event_interruptible(...)	0
-#define wake_up_interruptible(...)	do { } while (0)
-#define print_hex_dump(...)		do { } while (0)
-#define dump_stack(...)			do { } while (0)
-
-/* wl.c */
-#define task_pid_nr(x)			0
-#define set_freezable(...)		do { } while (0)
-#define try_to_freeze(...)		0
-#define set_current_state(...)		do { } while (0)
-#define kthread_should_stop(...)	0
-#define schedule()			do { } while (0)
-
-/* upd.c */
-static inline unsigned long copy_from_user(void *dest, const void *src,
-					   unsigned long count)
-{
-	memcpy((void *)dest, (void *)src, count);
-	return 0;
-}
-
-/* common */
-typedef int	spinlock_t;
-typedef int	wait_queue_head_t;
-#define spin_lock_init(...)
-#define spin_lock(...)
-#define spin_unlock(...)
-
-#define mutex_init(...)
-#define mutex_lock(...)
-#define mutex_unlock(...)
-
-#define init_rwsem(...)			do { } while (0)
-#define down_read(...)			do { } while (0)
-#define down_write(...)			do { } while (0)
-#define down_write_trylock(...)		1
-#define up_read(...)			do { } while (0)
-#define up_write(...)			do { } while (0)
-
-struct kmem_cache { int i; };
-#define kmem_cache_create(...)		1
-#define kmem_cache_alloc(obj, gfp)	malloc(sizeof(struct ubi_wl_entry))
-#define kmem_cache_free(obj, size)	free(size)
-#define kmem_cache_destroy(...)
-
-#define cond_resched()			do { } while (0)
-#define yield()				do { } while (0)
-
-#define KERN_WARNING
-#define KERN_ERR
-#define KERN_NOTICE
-#define KERN_DEBUG
-
-#define GFP_KERNEL			0
-#define GFP_NOFS			1
-
-#define __user
-#define __init
-#define __exit
-
-#define kthread_create(...)	__builtin_return_address(0)
-#define kthread_stop(...)	do { } while (0)
-#define wake_up_process(...)	do { } while (0)
-
-#define BUS_ID_SIZE		20
-
-struct rw_semaphore { int i; };
-struct device {
-	struct device		*parent;
-	struct class		*class;
-	char	bus_id[BUS_ID_SIZE];	/* position on parent bus */
-	dev_t			devt;	/* dev_t, creates the sysfs "dev" */
-	void	(*release)(struct device *dev);
-};
-struct mutex { int i; };
-struct kernel_param { int i; };
-
-struct cdev {
-	int owner;
-	dev_t dev;
-};
-#define cdev_init(...)		do { } while (0)
-#define cdev_add(...)		0
-#define cdev_del(...)		do { } while (0)
-
-#define MAX_ERRNO		4095
-#define IS_ERR_VALUE(x)		((x) >= (unsigned long)-MAX_ERRNO)
-
-static inline void *ERR_PTR(long error)
-{
-	return (void *) error;
-}
-
-static inline long PTR_ERR(const void *ptr)
-{
-	return (long) ptr;
-}
-
-static inline long IS_ERR(const void *ptr)
-{
-	return IS_ERR_VALUE((unsigned long)ptr);
-}
-
-/* module */
-#define THIS_MODULE		0
-#define try_module_get(...)	1
-#define module_put(...)		do { } while (0)
-#define module_init(...)
-#define module_exit(...)
-#define EXPORT_SYMBOL(...)
-#define EXPORT_SYMBOL_GPL(...)
-#define module_param_call(...)
-#define MODULE_PARM_DESC(...)
-#define MODULE_VERSION(...)
-#define MODULE_DESCRIPTION(...)
-#define MODULE_AUTHOR(...)
-#define MODULE_LICENSE(...)
 
 #ifndef __UBIFS_H__
 #include "../drivers/mtd/ubi/ubi.h"
diff --git a/include/usb/lin_gadget_compat.h b/include/usb/lin_gadget_compat.h
index a25e9d9..29fb166 100644
--- a/include/usb/lin_gadget_compat.h
+++ b/include/usb/lin_gadget_compat.h
@@ -13,22 +13,6 @@
 #include <linux/compat.h>
 
 /* common */
-#define spin_lock_init(...)
-#define spin_lock(...)
-#define spin_lock_irqsave(lock, flags) do { debug("%lu\n", flags); } while (0)
-#define spin_unlock(...)
-#define spin_unlock_irqrestore(lock, flags) do {flags = 0; } while (0)
-#define disable_irq(...)
-#define enable_irq(...)
-
-#define mutex_init(...)
-#define mutex_lock(...)
-#define mutex_unlock(...)
-
-#define GFP_KERNEL	0
-
-#define IRQ_HANDLED	1
-
 #define ENOTSUPP	524	/* Operation is not supported */
 
 #define BITS_PER_BYTE				8
diff --git a/lib/Makefile b/lib/Makefile
index 71b7fb8..a4999e2 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -56,6 +56,7 @@ obj-y += crc32.o
 obj-y += ctype.o
 obj-y += div64.o
 obj-y += hang.o
+obj-y += linux_compat.o
 obj-y += linux_string.o
 obj-$(CONFIG_REGEX) += slre.o
 obj-y += string.o
diff --git a/lib/linux_compat.c b/lib/linux_compat.c
new file mode 100644
index 0000000..9934399
--- /dev/null
+++ b/lib/linux_compat.c
@@ -0,0 +1,42 @@
+
+#include <common.h>
+#include <linux/compat.h>
+
+unsigned long copy_from_user(void *dest, const void *src,
+			     unsigned long count)
+{
+	memcpy((void *)dest, (void *)src, count);
+	return 0;
+}
+
+void *kmalloc(size_t size, int flags)
+{
+	return memalign(ARCH_DMA_MINALIGN, size);
+}
+
+void *kzalloc(size_t size, int flags)
+{
+	void *ptr = kmalloc(size, flags);
+	memset(ptr, 0, size);
+	return ptr;
+}
+
+void *vzalloc(unsigned long size)
+{
+	return kzalloc(size, 0);
+}
+
+struct kmem_cache *get_mem(int element_sz)
+{
+	struct kmem_cache *ret;
+
+	ret = memalign(ARCH_DMA_MINALIGN, sizeof(struct kmem_cache));
+	ret->sz = element_sz;
+
+	return ret;
+}
+
+void *kmem_cache_alloc(struct kmem_cache *obj, int flag)
+{
+	return memalign(ARCH_DMA_MINALIGN, obj->sz);
+}
-- 
1.8.3.1



More information about the U-Boot mailing list