[U-Boot] [PATCH 4/4] ARM: atmel: at91sam9x5ek: convert to generic board

[Josh Wu]

On 4/24/2014 11:42 AM, Bo Shen wrote:
> Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following
> warning on boot:
>
> "Warning: Your board does not use generic board. Please read
> doc/README.generic-board and take action. Boards not
> upgraded by the late 2014 may break or be removed."
>
> Signed-off-by: Bo Shen <voice.shen at atmel.com>

Tested on at91sam9x35ek board.

Tested-by: Josh Wu <josh.wu at atmel.com>

Best Regards,
Josh Wu

> ---
>
>   include/configs/at91sam9x5ek.h | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
> index f0a6757..5fc00af 100644
> --- a/include/configs/at91sam9x5ek.h
> +++ b/include/configs/at91sam9x5ek.h
> @@ -30,6 +30,8 @@
>   #define CONFIG_CMD_BOOTZ
>   #define CONFIG_OF_LIBFDT
>   
> +#define CONFIG_SYS_GENERIC_BOARD
> +
>   /* general purpose I/O */
>   #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
>   #define CONFIG_AT91_GPIO