[U-Boot] [PATCH 0/8] zmx25: Add hardware support

[dietho at gmx.de]

From: Thomas Diener <dietho at gmx.de>

This patchset is the result of the "[PATCH 3/4] zmx25: Add 
extended support for the cpu and base boards"
(http://patchwork.ozlabs.org/patch/341717/). I split the
patch up as Stefano Babic recommended.

Thomas Diener (8):
  imx25: Add new hardware registers
  drivers: Add polytouch touch sensor controller
  mxc_i2c: Use the 3th i2c channel for imx25
  input: Add support for FMA1125 touch controller
  input: Add support for MPR121 touch controller
  zmx25: Extended support for cpu and base boards
  imx25: Add new registers defines
  video: imx25lcdc: add board_video_init() call

 arch/arm/include/asm/arch-mx25/imx-regs.h   |  271 ++++++-
 arch/arm/include/asm/arch-mx25/iomux-mx25.h |   25 +-
 arch/arm/include/asm/imx-common/iomux-v3.h  |   13 +-
 arch/arm/lib/asm-offsets.c                  |    9 +
 board/syteco/zmx25/lowlevel_init.S          |   21 +
 board/syteco/zmx25/zmx25.c                  | 1052 +++++++++++++++++++++++++--
 drivers/i2c/mxc_i2c.c                       |    2 +-
 drivers/input/Makefile                      |    3 +
 drivers/input/fma1125.c                     |   47 ++
 drivers/input/mpr121.c                      |   67 ++
 drivers/input/polytouch.c                   |  138 ++++
 drivers/video/imx25lcdc.c                   |   19 +
 include/configs/zmx25.h                     |   66 +-
 include/fma1125.h                           |  140 ++++
 include/mpr121.h                            |  158 ++++
 include/polytouch.h                         |   35 +
 16 files changed, 1976 insertions(+), 90 deletions(-)
 create mode 100644 drivers/input/fma1125.c
 create mode 100644 drivers/input/mpr121.c
 create mode 100644 drivers/input/polytouch.c
 create mode 100644 include/fma1125.h
 create mode 100644 include/mpr121.h
 create mode 100644 include/polytouch.h

-- 
1.7.9.5