[U-Boot] [PATCH v13 0/2] S5P: Exynos: Add GPIO numbering feature

[Jaehoon Chung]

Well..

In my case, exynos4 (trats2) is working fine until now.

On 05/13/2014 05:38 PM, Minkyu Kang wrote:
> Dear Akshay Saraswat,
> 
> On 13/05/14 14:00, Akshay Saraswat wrote:
>> Used a script to recheck/verify pin mapping and existing mapping
>> appears to be fine, returning correct bank and pin values.
>> Did ./MAKEALL -a arm and found all Exynos/S5P related boards
>> compiled successfully.
>> Couldn't test booting over all of them.
>> Tested U-Boot bootup over SMDK5420, SMDK5250, Snow.
>> Requesting maintaners to please test over affected SoCs/boards.
>>
>> Changes in V2:
>> 	- Enabled CMD_GPIO as suggested by Simon Glass
>> 	  and supported same for EXYNOS5.
>> Changes in V3:
>> 	- New patch added to rename S5P GPIO definitions
>> 	  to S5P_GPIO.
>> 	- GPIO Table added to calculate the base address
>> 	  of input gpio bank.
>> Changes in V4:
>> 	- To have consistent 0..n-1 GPIO numbering the banks
>> 	  are divided into different parts where ever they
>> 	  have holes in them.
>> 	- Function and table to support gpio command moved
>> 	  to s5p-gpio driver.
>> 	- Rebased on latest u-boot-samsung tree.
>> Changes in V5:
>> 	- Rebased on latest u-boot-samsung tree.
>> 	- Removed Exynos5 specific code in gpio driver api to
>> 	  get bank.
>> 	- Added #define HAVE_GENERIC_GPIO in config file
>> 	  to remove conditinal CPU check in gpio driver.
>> Changes in V6:
>> 	- Isolated config changes in a new patch.
>> 	- Updated patches with corresponding changes for Exynos 5420.
>> Changes in V7:
>> 	- Added changes for other SoCs like Exynos 4412, 4210 etc.
>> Changes in V8:
>> 	- Changed Subject of patch 2/2 to reflect affected SoCs/boards.
>> 	- Fixed arndale board compile time errors introduced due to
>> 	  patch-set v7.
>> Changes in V9:
>> 	- Fixed checkpatch errors.
>> 	- Fixed naming error in exynosxxxx_gpio_data arrays which could
>> 	  be the possible reason behind data abort witnessed over
>> 	  Exynos4 boards.
>> Changes in v10:
>> 	- Made arch-exynos/gpio.h -> arch/gpio.h.
>> 	- Removed dead code.
>> 	- Replaced exynos_gpio_get calls with corresponding pin number.
>> 	- Edited pin numbmers in dts files.
>> Changes in v11:
>> 	- Created and fixed pinmux_config for Exynos 4412.
>> 	- Removed dead code.
>> Changes in v12:
>> 	- Added change logs in individual patches.
>> 	- Fixed few bugs and typos.
>> 	- Added "Acked-by: Przemyslaw Marczak".
>> Changes in v13:
>> 	- Fixed typo by replacing EXYNOS5420_GPIO_B10 with
>> 	  EXYNOS5420_GPIO_B20 at line # 4149 of patch 1/2.
>>
>> Akshay Saraswat (2):
>>   S5P: Exynos: Add GPIO pin numbering and rename definitions
>>   S5P: Exynos: Config: Enable GPIO CMD config
>>
>>  arch/arm/cpu/armv7/exynos/pinmux.c         |  561 +++++----
>>  arch/arm/dts/exynos4210-origen.dts         |    4 +-
>>  arch/arm/dts/exynos4210-trats.dts          |    6 +-
>>  arch/arm/dts/exynos4210-universal_c210.dts |    4 +-
>>  arch/arm/dts/exynos4412-trats2.dts         |    4 +-
>>  arch/arm/include/asm/arch-exynos/cpu.h     |   17 +-
>>  arch/arm/include/asm/arch-exynos/gpio.h    | 1761 +++++++++++++++++++++++-----
>>  arch/arm/include/asm/arch-s5pc1xx/gpio.h   |  948 ++++++++++++---
>>  board/samsung/arndale/arndale.c            |   11 +-
>>  board/samsung/goni/goni.c                  |   32 +-
>>  board/samsung/smdk5250/exynos5-dt.c        |   20 +-
>>  board/samsung/smdk5250/smdk5250.c          |   19 +-
>>  board/samsung/smdk5420/smdk5420.c          |   15 +-
>>  board/samsung/smdkc100/smdkc100.c          |    5 +-
>>  board/samsung/smdkv310/smdkv310.c          |   19 +-
>>  board/samsung/trats/trats.c                |   39 +-
>>  board/samsung/trats2/trats2.c              |   74 +-
>>  board/samsung/universal_c210/universal.c   |   51 +-
>>  drivers/gpio/s5p_gpio.c                    |  204 +++-
>>  include/configs/exynos5-dt.h               |    2 +
>>  include/configs/s5p_goni.h                 |    4 +-
>>  include/configs/s5pc210_universal.h        |   16 +-
>>  include/configs/smdkv310.h                 |    1 +
>>  include/configs/trats.h                    |    8 +-
>>  include/configs/trats2.h                   |    4 +-
>>  25 files changed, 2918 insertions(+), 911 deletions(-)
>>
> 
> applied to u-boot-samsung.
> 
> 
> Dear SAMSUNG developers,
> 
> If you have any problem, please tell us immediately.
> 
> Thanks,
> Minkyu Kang.
>