[U-Boot] [U-Boot,v3,2/3] arm:at91: enable ROM loadable atmel image
Andreas Bießmann
andreas.devel at googlemail.com
Tue May 27 00:12:40 CEST 2014
Dear Andreas Bießmann,
Andreas Bießmann <andreas.devel at googlemail.com> writes:
>For sama5d3xek we need to modify the SPL image for correct detection by ROM
>code.
>
>Signed-off-by: Andreas Bießmann <andreas.devel at googlemail.com>
>Tested-by: Bo Shen <voice.shen at atmel.com>
>
>---
>Changes in v3:
>* add atmel_pmecc_params host tool, it generates an appropriate string for
> mkimage -n switch with compiled in values also used in atmel_nand driver
>
>Changes in v2:
>* add -n switch to mkimage for PMECC type NAND and CONFIG_SYS_NANDFLASH
>
> arch/arm/cpu/armv7/at91/config.mk | 10 ++++++++
> doc/README.atmel_pmecc | 21 +++++++++++++++
> spl/Makefile | 11 ++++++++
> tools/Makefile | 2 ++
> tools/atmel_pmecc_params.c | 51 +++++++++++++++++++++++++++++++++++++
> 5 files changed, 95 insertions(+)
> create mode 100644 arch/arm/cpu/armv7/at91/config.mk
> create mode 100644 tools/atmel_pmecc_params.c
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
More information about the U-Boot
mailing list