[U-Boot] [RFC PATCH v0 3/4] vexpress_aemv8a.h: Clean up the config
Tom Rini
trini at ti.com
Mon May 5 17:26:20 CEST 2014
- Drop DEBUG
- Drop defines we can use the default of.
- Drop CONFIG_GICV3 and related defines, we aren't using interrupts and
do not need to configure the interrupt controller.
- Provide a larger malloc pool.
- Correct default locations for kernel / initrd / device tree
Signed-off-by: Tom Rini <trini at ti.com>
---
include/configs/vexpress_aemv8a.h | 26 +++++---------------------
1 file changed, 5 insertions(+), 21 deletions(-)
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index dff6adc..ae0ee1b 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -8,12 +8,8 @@
#ifndef __VEXPRESS_AEMV8A_H
#define __VEXPRESS_AEMV8A_H
-#define DEBUG
-
#define CONFIG_REMAKE_ELF
-#define CONFIG_GICV3
-
/*#define CONFIG_ARMV8_SWITCH_TO_EL1*/
/*#define CONFIG_SYS_GENERIC_BOARD*/
@@ -94,20 +90,11 @@
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY (0x1800000) /* 24MHz */
-/* Generic Interrupt Controller Definitions */
-#ifdef CONFIG_GICV3
-#define GICD_BASE (0x2f000000)
-#define GICR_BASE (0x2f100000)
-#else
-#define GICD_BASE (0x2C001000)
-#define GICC_BASE (0x2C002000)
-#endif
-
#define CONFIG_SYS_MEMTEST_START V2M_BASE
#define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000)
/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20))
/* SMSC91C111 Ethernet Configuration */
#define CONFIG_SMC91111 1
@@ -121,7 +108,6 @@
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_SERIAL0 V2M_UART0
#define CONFIG_SYS_SERIAL1 V2M_UART1
@@ -166,10 +152,9 @@
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_addr=0x200000\0" \
- "initrd_addr=0xa00000\0" \
- "initrd_size=0x2000000\0" \
- "fdt_addr=0x100000\0" \
+ "kernel_addr=0x80080000\0" \
+ "initrd_addr=0x90000000\0" \
+ "fdt_addr=0x88000000\0" \
"fdt_high=0xa0000000\0"
#define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0"
@@ -187,10 +172,9 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS 64 /* max command args */
#endif /* __VEXPRESS_AEMV8A_H */
--
1.7.9.5
More information about the U-Boot
mailing list