[U-Boot] [PATCH v12 2/2] S5P: Exynos: Config: Enable GPIO CMD config

Akshay Saraswat akshay.s at samsung.com
Tue May 6 16:36:05 CEST 2014 

Enabling configs for GPIO CMD, EXYNOS4 family and replacing
exynos_gpio_get with new linear GPIO pin number required
because of the new function asking only 2 arguments (pin
and value) instead of 3 (bank, pin and value).

Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
Acked-by: Przemyslaw Marczak <p.marczak at samsung.com>
---
Changes in v12:
	- Added change log in this patch.
	- Added "Acked-by: Przemyslaw Marczak".
Changes in v10:
	- Replaced exynos_gpio_get calls with corresponding pin number.
Changes in V8:
	- Changed Subject to reflect affected SoCs/boards.
Changes in V6:
	- Isolated config changes in a new patch.

 include/configs/exynos5-dt.h        |  2 ++
 include/configs/s5p_goni.h          |  4 ++--
 include/configs/s5pc210_universal.h | 16 ++++++++--------
 include/configs/smdkv310.h          |  1 +
 include/configs/trats.h             |  8 ++++----
 include/configs/trats2.h            |  4 ++--
 6 files changed, 19 insertions(+), 16 deletions(-)

diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h
index 414db42..5a9b1b4 100644
--- a/include/configs/exynos5-dt.h
+++ b/include/configs/exynos5-dt.h
@@ -288,4 +288,6 @@
 
 #define CONFIG_CMD_BOOTZ
 
+#define CONFIG_CMD_GPIO
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 991c43e..799d4fe 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -214,8 +214,8 @@
 /*
  * I2C Settings
  */
-#define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get(j4, 3)
-#define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get(j4, 0)
+#define CONFIG_SOFT_I2C_GPIO_SCL S5PC110_GPIO_J43
+#define CONFIG_SOFT_I2C_GPIO_SDA S5PC110_GPIO_J40
 
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index 2da8871..b368266 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -170,8 +170,8 @@
 /*
  * I2C Settings
  */
-#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7)
-#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6)
+#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7
+#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6
 
 #define CONFIG_CMD_I2C
 
@@ -196,10 +196,10 @@
  */
 #define CONFIG_SOFT_SPI
 #define CONFIG_SOFT_SPI_MODE SPI_MODE_3
-#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_get(2, y3, 1)
-#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_get(2, y3, 3)
-#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_get(2, y3, 0)
-#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_get(2, y4, 3)
+#define CONFIG_SOFT_SPI_GPIO_SCLK EXYNOS4_GPIO_Y31
+#define CONFIG_SOFT_SPI_GPIO_MOSI EXYNOS4_GPIO_Y33
+#define CONFIG_SOFT_SPI_GPIO_MISO EXYNOS4_GPIO_Y30
+#define CONFIG_SOFT_SPI_GPIO_CS EXYNOS4_GPIO_Y43
 
 #define SPI_DELAY udelay(1)
 #undef SPI_INIT
@@ -231,8 +231,8 @@ int universal_spi_read(void);
 #define KEY_PWR_INTERRUPT_REG		MAX8998_REG_IRQ1
 #define KEY_PWR_INTERRUPT_MASK		(1 << 7)
 
-#define KEY_VOL_UP_GPIO			exynos4_gpio_get(2, x2, 0)
-#define KEY_VOL_DOWN_GPIO		exynos4_gpio_get(2, x2, 1)
+#define KEY_VOL_UP_GPIO			EXYNOS4_GPIO_X20
+#define KEY_VOL_DOWN_GPIO		EXYNOS4_GPIO_X21
 #endif /* __ASSEMBLY__ */
 
 /* LCD console */
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index 1388f49..34adfaf 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -12,6 +12,7 @@
 /* High Level Configuration Options */
 #define CONFIG_SAMSUNG			1	/* in a SAMSUNG core */
 #define CONFIG_S5P			1	/* S5P Family */
+#define CONFIG_EXYNOS4				/* EXYNOS4 Family */
 #define CONFIG_EXYNOS4210		1	/* which is a EXYNOS4210 SoC */
 #define CONFIG_SMDKV310			1	/* working with SMDKV310*/
 
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 5d8bd60..6cade07 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -207,8 +207,8 @@
 #define CONFIG_SYS_I2C_INIT_BOARD
 
 /* I2C FG */
-#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(2, y4, 1)
-#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(2, y4, 0)
+#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_Y41
+#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_Y40
 
 /* POWER */
 #define CONFIG_POWER
@@ -245,8 +245,8 @@
 #define KEY_PWR_INTERRUPT_REG		MAX8997_REG_INT1
 #define KEY_PWR_INTERRUPT_MASK		(1 << 0)
 
-#define KEY_VOL_UP_GPIO			exynos4_gpio_get(2, x2, 0)
-#define KEY_VOL_DOWN_GPIO		exynos4_gpio_get(2, x2, 1)
+#define KEY_VOL_UP_GPIO			EXYNOS4_GPIO_X20
+#define KEY_VOL_DOWN_GPIO		EXYNOS4_GPIO_X21
 #endif /* __ASSEMBLY__ */
 
 /* LCD console */
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
index 53d449c..856c03b 100644
--- a/include/configs/trats2.h
+++ b/include/configs/trats2.h
@@ -227,8 +227,8 @@ int get_soft_i2c_sda_pin(void);
 #define KEY_PWR_INTERRUPT_REG		MAX77686_REG_PMIC_INT1
 #define KEY_PWR_INTERRUPT_MASK		(1 << 1)
 
-#define KEY_VOL_UP_GPIO			exynos4x12_gpio_get(2, x2, 2)
-#define KEY_VOL_DOWN_GPIO		exynos4x12_gpio_get(2, x3, 3)
+#define KEY_VOL_UP_GPIO			EXYNOS4X12_GPIO_X22
+#define KEY_VOL_DOWN_GPIO		EXYNOS4X12_GPIO_X33
 #endif /* __ASSEMBLY__ */
 
 /* LCD console */
-- 
1.8.3.2

More information about the U-Boot mailing list