[U-Boot] [PATCH 4/4] [PATCH] ventana: Add support for the LTC3676 PMIC

[Stefano Babic]

On 05/05/2014 17:22, Tim Harvey wrote:
> The LTC3676 PMIC is used instead of the PFUZE100 PMIC on the
> GW51xx/GW52xx/GW53xx Ventana baseboards. In order to support the IMX6Q SoC
> at 1GHz on those baseboards, we need to adjust the voltage scaling for the SW1
> and SW3 DC/DC converters on the LTC3676 for 1225mV. Note that the scalar
> values for the LTC3676 are board-specific as they relate to a resistor devider
> chosen by the board design.
> 
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---

Applied after fixing:

board/gateworks/gw_ventana/gw_ventana.c: In function 'power_init_board':
board/gateworks/gw_ventana/gw_ventana.c:788:1: warning: control reaches
end of non-void function [-Wreturn-type]

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================