[U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
Albert ARIBAUD
albert.u.boot at aribaud.net
Fri May 30 19:45:43 CEST 2014
Hi Andreas and sorry for the dupe mail,
On Tue, 27 May 2014 00:16:26 +0200, Andreas Bießmann
<andreas.devel at googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull the following changes from u-boot-atmel/master into
> u-boot-arm/master.
>
> The following changes since commit 49692c5f517d8e44ed9db0de778728fe7d2a300c:
>
> net/designware: Make DMA burst length configurable and reduce by default (2014-05-25 17:23:58 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 9637a1bb896efe392a58dd2772e2c3fcb646409d:
>
> ARM: at91sam9m10g45ek: add mmc environment configuration support (2014-05-27 00:10:55 +0200)
>
> ----------------------------------------------------------------
> Andreas Bießmann (4):
> corvus: remove unneeded CONFIG_AT91_LEGACY
> mkimage: add atmelimage
> arm:at91: enable ROM loadable atmel image
> sama5d3xek: enable PMECC header generation
>
> Bo Shen (6):
> ARM: atmel: switch to main crystal osc for SPL boot
> ARM: atmel: enable SPL on sama5d3_xplained board
> ARM: atmel: sama5d3xek: convert to generic board
> ARM: atmel: sama5d3_xplained: convert to generic board
> ARM: atmel: at91sam9m10g45ek: convert to generic board
> ARM: atmel: at91sam9x5ek: convert to generic board
>
> Wu, Josh (8):
> gpio: at91: add sanity check for the NULL pointer
> mmc: atmel_mci: fix print incorrect buffer content for debug
> ARM: at91: remove AT91X40 macro since it is not use any more
> ARM: at91sam9x5: define the AT91FAMILY and ARM926EJS in SoC header
> at91: remove redundant AT91FAMILY definition in board config file
> ARM: at91: remove redundant ARM926EJS definition in board config files
> ARM: at91sam9m10g45ek: enable mci0 support
> ARM: at91sam9m10g45ek: add mmc environment configuration support
>
> .../cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 17 +
> arch/arm/cpu/armv7/at91/config.mk | 10 +
> arch/arm/cpu/at91-common/spl.c | 39 +++
> arch/arm/include/asm/arch-at91/at91_pmc.h | 4 +
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 3 +
> arch/arm/include/asm/arch-at91/hardware.h | 2 -
> board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 10 +
> board/atmel/sama5d3_xplained/sama5d3_xplained.c | 87 +++++
> boards.cfg | 1 +
> common/image.c | 1 +
> doc/README.atmel_pmecc | 21 ++
> drivers/gpio/at91_gpio.c | 3 +-
> drivers/mmc/gen_atmel_mci.c | 5 +-
> include/configs/at91sam9m10g45ek.h | 37 ++-
> include/configs/at91sam9n12ek.h | 3 -
> include/configs/at91sam9x5ek.h | 3 +-
> include/configs/corvus.h | 3 -
> include/configs/cpu9260.h | 1 -
> include/configs/ethernut5.h | 2 -
> include/configs/sama5d3_xplained.h | 53 ++-
> include/configs/sama5d3xek.h | 4 +-
> include/configs/vl_ma2sc.h | 2 -
> include/image.h | 1 +
> spl/Makefile | 11 +
> tools/Makefile | 3 +
> tools/atmel_pmecc_params.c | 51 +++
> tools/atmelimage.c | 342 ++++++++++++++++++++
> tools/imagetool.c | 2 +
> tools/imagetool.h | 1 +
> 29 files changed, 701 insertions(+), 21 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/at91/config.mk
> create mode 100644 tools/atmel_pmecc_params.c
> create mode 100644 tools/atmelimage.c
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list