[U-Boot] [PATCH v5 0/4] mpc8313: ids8313 board updates
Heiko Schocher
hs at denx.de
Wed May 28 11:33:32 CEST 2014
- introduce CONFIG_IMAGE_FORMAT_LEGACY for enabling
booting legacy image format. Disable this per default if
CONFIG_FIT_SIGNATURE is defined.
As the ids8313 board needs legacy image format and uses
CONFIG_FIT_SIGNATURE, enable legacy image format for the
ids8313 board
- add CONFIG_SYS_GENERIC_BOARD to the ids8313 board,
therefore fdtdec_get_int() is moved out of lib/fdtdec.c
as lib/fdtdec.c is only compiled if CONFIG_OF_CONTROL
is defined, but defining this for the ids8313 board
leads in conjunction with CONFIG_SYS_GENERIC_BOARD
in booting error:
No valid FDT found - please append one to U-Boot binary, use u-boot-dtb.bin or define CONFIG_OF_EMBED. For sandbox, use -d <file.dtb>
So move the common used function fdtdec_get_int()
out of lib/fdtdec.c into lib/fdtdec_common.c
Cc: Simon Glass <sjg at chromium.org>
Cc: Kim Phillips <kim.phillips at freescale.com>
Cc: Wolfgang Denk <wd at denx.de>
Cc: Tom Rini <trini at ti.com>
Cc: Michael Conrad <Michael.Conrad at ids.de>
Tested this patchset on the ids8313 board, MAKEALL for powerpc
and arm adds no compiler errors/warnings.
While testing this patchset on the ids8313 board, I found, that
current U-Boot compiles fine with eldk 5.5, but if erasing the
sectors where U-Boot resists in the NOR flash, u-boot commands
are not longer working :-(
$ powerpc-linux-gcc -v
Using built-in specs.
COLLECT_GCC=powerpc-linux-gcc
COLLECT_LTO_WRAPPER=/opt/eldk-5.5/powerpc/sysroots/i686-eldk-linux/usr/libexec/powerpc-linux/gcc/powerpc-linux/4.8.1/lto-wrapper
Target: powerpc-linux
[...]
Thread model: posix
gcc version 4.8.1 (GCC)
$
This problem does not pop up with eldk 5.4 or 5.3 !
Digged a little bit in it, and found that some (not all!) fmt
strings are loaded from flash addresses not from ram addresses ...
gdb shows:
Program received signal SIGTRAP, Trace/breakpoint trap.
printf (fmt=0xfff5ad34 '\377' <repeats 200 times>..., fmt at entry=0x7fdad34 "parse_stream, end_trigger=%d\n") at /home/hs/ids/u-boot/common/console.c:479
^^^^^^^^^^
addr in nor flash not in ram
479 {
(gdb) bt
#0 printf (fmt=0xfff5ad34 '\377' <repeats 200 times>..., fmt at entry=0x7fdad34 "parse_stream, end_trigger=%d\n") at /home/hs/ids/u-boot/common/console.c:479
#1 0x07f88c4c in parse_stream (end_trigger=10, input=0x775fe00, ctx=0x775fd60, dest=0x775fd7c) at /home/hs/ids/u-boot/common/hush.c:2942
this leads, if flash is erased, in a crash ... try to find out
more ...
This problem seems a toolchain problem, as I tried older
U-Boot versions with eldk 5.5 on this board, and all versions
break ... I have no other mpc83xx board handy ... can somebody
try this scenario on a mpc83xx based board? Kim?
Current U-Boot does work fine on a mpc52xx based board compiled
with eldk 5.5, so it seems a mpc83xx specific problem?
Heiko Schocher (4):
bootm: make use of legacy image format configurable
mpc8313, signed fit: enable legacy image format on ids8313 board
lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c
mpc8313: add CONFIG_SYS_GENERIC_BOARD to ids8313 board
README | 18 ++++++++++++++++++
common/cmd_bootm.c | 14 ++++++++++++++
common/cmd_disk.c | 4 ++++
common/cmd_fdc.c | 4 ++++
common/cmd_fpga.c | 2 ++
common/cmd_nand.c | 4 ++++
common/cmd_source.c | 4 ++++
common/cmd_ximg.c | 9 +++++++--
common/image-fdt.c | 10 ++++++++--
common/image.c | 25 ++++++++++++++++++-------
doc/uImage.FIT/signature.txt | 3 +++
include/config_fallbacks.h | 8 ++++++++
include/configs/ids8313.h | 4 +++-
include/configs/zynq-common.h | 1 +
include/image.h | 2 ++
lib/Makefile | 1 +
lib/fdtdec.c | 36 ------------------------------------
lib/fdtdec_common.c | 38 ++++++++++++++++++++++++++++++++++++++
tools/fdtdec.c | 1 +
19 files changed, 140 insertions(+), 48 deletions(-)
create mode 100644 lib/fdtdec_common.c
--
1.8.3.1
More information about the U-Boot
mailing list