[U-Boot] [PATCH 12/12] imx: ventana: switch to SPL

York Sun yorksun at freescale.com
Wed May 7 18:14:05 CEST 2014


On 05/06/2014 04:35 PM, Tim Harvey wrote:
> On Tue, May 6, 2014 at 12:11 PM, Jeroen Hofstee <dasuboot at myspectrum.nl> wrote:
>> Hello Tim,
>>
<snip>
>>
>> Since Crt0.S already created gd on the stack before calling
>> board_init_f, can't the assignment of gd not simply be removed?
>> Is there anything special about gdata?
>>
>> Regards,
>> Jeroen
>>
>>
> 
> Jeroen,
> 
> That does make sense, but what I find is that York's ocmmit
> dec1861be90c948ea9fb771927d3d26a994d2e20 requires that gd be blanked
> and its not. This causes bus_i2c_init to skip its initialization
> because p->base is not zero.
> 
> York, does this make sense? Your patch creates a dependence on
> gd->srdata being blank which isn't the case with the SRAM when booting
> from the IMX6 boot rom.
> 

GD should be cleared (zeroed). Then we don't have this problem. Whoever sets up
gd (board_int_f, cpu_init_f, or others) should make sure gd is cleared. Why
isn't it the case for IMX6 boot rom?

York



More information about the U-Boot mailing list