[U-Boot] NAND custodian (was Re: [PATCH v5 0/5] enable support for x16 NAND devices)

[Heiko Schocher]

Hello Tom,

Am 28.05.2014 23:00, schrieb Tom Rini:
> On Tue, May 27, 2014 at 12:21:21PM -0500, Scott Wood wrote:
>> On Tue, 2014-05-27 at 11:48 +0000, Gupta, Pekon wrote:
>>> Hello Scott, Tom,
>>>
>>>
>>>> From: Gupta, Pekon
>>>>
>>>> *changes v4 ->  v5*
>>>> [PATCH 1/5]<no change>
>>>> [PATCH 2/5] fixed compilation error for OMAP3 platforms
>>>> [PATCH 3/5]<no change>
>>>> [PATCH 4/5] dropped old [PATCH] mtd: nand: omap: add CONFIG_SYS_NAND_BUSWIDTH_16BIT to
>>>> indicate NAND device bus-width
>>>>             instead new [PATCH] mtd: nand: omap: add CONFIG_SYS_NAND_BUSWIDTH_16BIT to indicate
>>>> NAND device bus-width
>>>> [PATCH 5/5] additional cleanup in include/configs/cm_t35.h
>>>> Build tested for:      MAKEALL -s am33xx -s omap3 -s omap4 -s omap5
>>>> Rebased above series:  http://lists.denx.de/pipermail/u-boot/2014-April/177323.html
>>>>
>>>
>>> This series few other patch series are awaiting response from
>>> long time.
>>
>> Sorry for the delay -- I've been fairly busy, and don't usually get
>> around to processing U-Boot patches until after the merge window closes.
>> The IRC channel topic has been lying and saying the merge window is
>> still open (also, http://www.denx.de/wiki/U-Boot/ReleaseCycle says that
>> the merge window is open and will close in negative 24 days).
>
> Bah, I always forget to update those parts as well, beyond the actual
> releases...
>
>> Given that I don't do much with NAND myself these days, that the patch
>> volume is higher than when I started as NAND custodian, and that I now
>> have maintainership duties in Linux competing for my time, I'm wondering
>> if someone else (maybe you or Heiko?) wants to step into the NAND
>> custodian role.
>
> It's been a pleasure working with you.  Pekon? Heiko?  Either of you
> interested in this particular role?  Thanks!

I am not a NAND expert and I am little bit under water currently...
(but if nobody else volunteers I can try it ...)

Pekon?

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany