[U-Boot] [PATCH v2] Exynos: Make sure ps_hold gets set in the SPL

[Akshay Saraswat]

From: Doug Anderson <dianders at chromium.org>

Setting ps_hold ought to be one of the first things we do when we
first boot up. If we wait until the main u-boot runs we won't set it
in time and the PMIC may power us back off.

Moving ps_hold setup into the generic power_init() which
should contain code that's currently duplicated in the
board_power_init() of several boards.

Signed-off-by: Doug Anderson <dianders at chromium.org>
Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
Acked-by: Simon Glass <sjg at chromium.org>
---
Changes since v1:
	- Added "Acked-by".

 arch/arm/cpu/armv7/exynos/lowlevel_init.c |    6 +++++-
 arch/arm/cpu/armv7/exynos/power.c         |   14 ++++++++++++++
 arch/arm/include/asm/arch-exynos/power.h  |    8 ++++++++
 3 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
index 11fe5b8..ed966bc 100644
--- a/arch/arm/cpu/armv7/exynos/lowlevel_init.c
+++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
@@ -39,6 +39,7 @@ enum {
 	DO_CLOCKS	= 1 << 1,
 	DO_MEM_RESET	= 1 << 2,
 	DO_UART		= 1 << 3,
+	DO_POWER	= 1 << 4,
 };
 
 int do_lowlevel_init(void)
@@ -60,9 +61,12 @@ int do_lowlevel_init(void)
 		break;
 	default:
 		/* This is a normal boot (not a wake from sleep) */
-		actions = DO_CLOCKS | DO_MEM_RESET;
+		actions = DO_CLOCKS | DO_MEM_RESET | DO_POWER;
 	}
 
+	if (actions & DO_POWER)
+		power_init();
+
 	if (actions & DO_CLOCKS) {
 		system_clock_init();
 		mem_ctrl_init(actions & DO_MEM_RESET);
diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
index 563abd7..8999fb9 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -112,6 +112,12 @@ static void exynos5_set_ps_hold_ctrl(void)
 			EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
 }
 
+/*
+ * Set ps_hold data driving value high
+ * This enables the machine to stay powered on
+ * after the initial power-on condition goes away
+ * (e.g. power button).
+ */
 void set_ps_hold_ctrl(void)
 {
 	if (cpu_is_exynos5())
@@ -196,3 +202,11 @@ void power_exit_wakeup(void)
 	else
 		exynos4_power_exit_wakeup();
 }
+
+int power_init(void)
+{
+	/* Assert PS_HOLD to indicate that we're up and running */
+	set_ps_hold_ctrl();
+
+	return 0;
+}
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index bcef43f..7957169 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -1726,4 +1726,12 @@ uint32_t get_reset_status(void);
 
 /* Read the resume function and call it */
 void power_exit_wakeup(void);
+
+/**
+ * SoC level power init
+ *
+ * @return	Return 0 if ok, else -1
+ */
+int power_init(void);
+
 #endif
-- 
1.7.9.5