[U-Boot] [PATCH v1] ppc: Fix ppc4xx CONFIG_SYS_GENERIC_BOARD

[dirk.eibach at gdsys.cc]

From: Dirk Eibach <dirk.eibach at gdsys.cc>

I realized that with v2014.10 u-boot is not starting up on
ppc4xx boards with CONFIG_SYS_GENERIC_BOARD set.

I bisected it down to this:
d54d7eb support blackfin board initialization in generic board_f

With
d29437a ppc: Make ppc4xx ready for CONFIG_SYS_GENERIC_BOARD
I set gd to a defined value for ppc4xx in cpu_init_f().
I did not realize that the gd struct has also to be memset()
to zero at this point.

But at least commit d54d7eb assumes it is:
@@ -516,11 +528,13 @@ static int reserve_malloc(void)
 /* (permanently) allocate a Board Info struct */
 static int reserve_board(void)
 {
-	gd->start_addr_sp -= sizeof(bd_t);
-	gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t));
-	memset(gd->bd, '\0', sizeof(bd_t));
-	debug("Reserving %zu Bytes for Board Info at: %08lx\n",
-			sizeof(bd_t), gd->start_addr_sp);
+	if (!gd->bd) {
+		gd->start_addr_sp -= sizeof(bd_t);
+		gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t));
+		memset(gd->bd, '\0', sizeof(bd_t));
+		debug("Reserving %zu Bytes for Board Info at: %08lx\n",
+		      sizeof(bd_t), gd->start_addr_sp);
+	}
 	return 0;
 }
 #endif

This might also be an issue on other architectures, so maintainers should
check.

Signed-off-by: Dirk Eibach <dirk.eibach at gdsys.cc>
---

 arch/powerpc/cpu/ppc4xx/cpu_init.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/cpu/ppc4xx/cpu_init.c b/arch/powerpc/cpu/ppc4xx/cpu_init.c
index 2256123..e5a0e21 100644
--- a/arch/powerpc/cpu/ppc4xx/cpu_init.c
+++ b/arch/powerpc/cpu/ppc4xx/cpu_init.c
@@ -451,6 +451,9 @@ cpu_init_f (void)
 #endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
 
 	gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+	/* Clear initial global data */
+	memset((void *)gd, 0, sizeof(gd_t));
 }
 
 /*
-- 
1.8.3