November 2014 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Nov 1 01:01:52 CET 2014
Ending: Sun Nov 30 21:27:31 CET 2014
Messages: 3570

• [U-Boot] [PATCH] imx:mx6sxsabresd fix pfuz probe failed   Peng Fan
• [U-Boot] [PATCH] imx:mx6sxsabresd fix pfuz probe failed   Fabio Estevam
• [U-Boot] [PATCH] imx:mx6sxsabresd fix pfuz probe failed   Fabio Estevam
• [U-Boot] [PATCH 0/5] add usb support for mx6 board   Peng Fan
• [U-Boot] [PATCH 1/5] imx:mx6sxsabresd add usb support   Peng Fan
• [U-Boot] [PATCH 2/5] imx:mx6slevk add usb support   Peng Fan
• [U-Boot] [PATCH 3/5] arm:imx-common introduce a new function to set gpr   Peng Fan
• [U-Boot] [PATCH 4/5] imx:mx6qarm2 add usb support   Peng Fan
• [U-Boot] [PATCH 5/5] imx:mx6sabresd add usb support   Peng Fan
• [U-Boot] [PATCH 1/2] imx:mx6sl_pins add pad settings for usb   Peng Fan
• [U-Boot] [PATCH 2/2] arm:imx-common add function prototype for gpr set   Peng Fan
• [U-Boot] [RFC PATCH v1 0/2] kgdb:add breakpoint and arm support   Peng Fan
• [U-Boot] [RFC PATCH v1 1/2] kgdb: add breakpoint support   Peng Fan
• [U-Boot] [RFC PATCH v1 2/2] arm:kgdb add KGDB support for arm platform   Peng Fan
• [U-Boot] [PATCH] blackfin: rename blackfin i2c driver to adi   Scott Jiang
• [U-Boot] [PATCH] powerpc/t1040qds: Add support of SD boot for T1040QDS Board   Vijay Rai
• [U-Boot] [PATCH 3/5] arm:imx-common introduce a new function to set gpr   Li Ye-B37916
• [U-Boot] [PATCH 1/5] imx:mx6sxsabresd add usb support   Li Ye-B37916
• [U-Boot] [PATCH v2 00/12] spi: sf: ICH SPI driver fix and flash params update   Bin Meng
• [U-Boot] [PATCH v2 01/12] spi/ich.c: Fix a bug of reading from a non-64 bytes aligned address   Bin Meng
• [U-Boot] [PATCH v2 02/12] spi/ich.c: Set the rx operation mode for ich 7   Bin Meng
• [U-Boot] [PATCH v2 03/12] spi: sf: Support byte program for sst spi flash   Bin Meng
• [U-Boot] [PATCH v2 04/12] sf: Update SST flash params   Bin Meng
• [U-Boot] [PATCH v2 05/12] sf: Update Atmel flash params   Bin Meng
• [U-Boot] [PATCH v2 06/12] sf: Update EON flash params   Bin Meng
• [U-Boot] [PATCH v2 07/12] sf: Update GigaDevice flash params   Bin Meng
• [U-Boot] [PATCH v2 08/12] sf: Update Macronix flash params   Bin Meng
• [U-Boot] [PATCH v2 09/12] sf: Update Spansion flash params   Bin Meng
• [U-Boot] [PATCH v2 10/12] sf: Update Micron flash params   Bin Meng
• [U-Boot] [PATCH v2 11/12] sf: Update Winbond flash params   Bin Meng
• [U-Boot] [PATCH v2 12/12] sf: Give proper spacing between flash table params   Bin Meng
• [U-Boot] Need FTP client support in U-Boot   Gilles Chanteperdrix
• [U-Boot] Need FTP client support in U-Boot   Gilles Chanteperdrix
• [U-Boot] [PATCH v2 1/2] mmc: Board-specific MMC power initializations   Paul Kocialkowski
• [U-Boot] [PATCH v2 2/2] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Paul Kocialkowski
• [U-Boot] [PATCH 3/5] arm:imx-common introduce a new function to set gpr   Peng Fan
• [U-Boot] [PATCH v3 0/2] mmc: Board-specific MMC power initializations   Paul Kocialkowski
• [U-Boot] [PATCH v3 1/2] mmc: Board-specific MMC power initializations   Paul Kocialkowski
• [U-Boot] [PATCH v3 2/2] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Paul Kocialkowski
• [U-Boot] [PATCH] power: LP8720 regulator support   Paul Kocialkowski
• [U-Boot] [PATCH 2/5] imx:mx6slevk add usb support   Fabio Estevam
• [U-Boot] [PATCH 3/5] arm:imx-common introduce a new function to set gpr   Wolfgang Denk
• [U-Boot] [PATCH 1/5] imx:mx6sxsabresd add usb support   Fabio Estevam
• [U-Boot] [PATCH 1/2] imx:mx6sl_pins add pad settings for usb   Fabio Estevam
• [U-Boot] [PATCH v3 0/6] dm: Introduce driver model for sunxi   Simon Glass
• [U-Boot] [PATCH 2/6] sandbox: init cli for -c   Simon Glass
• [U-Boot] [PATCH 1/6] dlmalloc: ensure gd is set for early alloc   Simon Glass
• [U-Boot] [PATCH 3/6] hush: return consistent codes from run_command()   Simon Glass
• [U-Boot] [PATCH 4/6] hush: fix segfault on syntax error   Simon Glass
• [U-Boot] [PATCH 5/6] hush: make run_command() return an error on parsing failure   Simon Glass
• [U-Boot] [PATCH 6/6] hush: add some tests for quoting   Simon Glass
• [U-Boot] [PATCH v4 05/29] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] Flat Image Tree and boot arguments   Simon Glass
• [U-Boot] [PATCH] fs: make it possible to read the filesystem UUID   Simon Glass
• [U-Boot] Need FTP client support in U-Boot   Simon Glass
• [U-Boot] [PATCH v2 7/9] dm: at91: Convert snapper9260 to use driver model   Masahiro YAMADA
• [U-Boot] [PATCH] Fix cosmetic issues in mkimage manpage   Vagrant Cascadian
• [U-Boot] Building fw_printenv (e.g. make env) failing   Marcel Ziswiler
• [U-Boot] Need FTP client support in U-Boot   Gilles Chanteperdrix
• [U-Boot] [PATCH 1/2] kconfig: arm: select CPU_V7 for some new boards   Georges Savoundararadj
• [U-Boot] Building fw_printenv (e.g. make env) failing   Jeroen Hofstee
• [U-Boot] [PATCH 2/2] kconfig: arm: move "armv8" define to arch/arm/Kconfig   Georges Savoundararadj
• [U-Boot] [PATCH v3 1/2] mmc: Board-specific MMC power initializations   Igor Grinberg
• [U-Boot] [PATCH v3 2/2] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Igor Grinberg
• [U-Boot] Fwd: verifying & signing   srinivasan
• [U-Boot] Fwd: verifying & signing   srinivasan
• [U-Boot] [PATCH V2 1/4] arm: mx6: cm_fx6: change issd gpio order   Igor Grinberg
• [U-Boot] [PATCH V2 2/4] arm: mx6: cm_fx6: detect 1GB DRAM correctly on solo   Igor Grinberg
• [U-Boot] [PATCH V2 3/4] common: introduce board_preboot_os hook   Igor Grinberg
• [U-Boot] [PATCH V2 4/4] arm: mx6: cm_fx6: power down sata on OS boot   Igor Grinberg
• [U-Boot] Announcing u-boot with full A31 support   Hans de Goede
• [U-Boot] [linux-sunxi] Announcing u-boot with full A31 support   Henrik Nordström
• [U-Boot] [linux-sunxi] Announcing u-boot with full A31 support   Hans de Goede
• [U-Boot] [PATCH v3 1/2] mmc: Board-specific MMC power initializations   Paul Kocialkowski
• [U-Boot] [PATCH v3 2/2] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Paul Kocialkowski
• [U-Boot] Announcing u-boot with full A31 support   Hans de Goede
• [U-Boot] verifying & signing   Simon Glass
• [U-Boot] [RFC] x86: Intel FSP integration   Bin Meng
• [U-Boot] [PATCH] drivers/i2c/fsl_i2c: Change CONFIG_I2C_TIMEOUT to 100ms   Shaveta Leekha
• [U-Boot] Query on the ci_udc driver for USB client implementation   Sanchayan Maity
• [U-Boot] Need FTP client support in U-Boot   Mythri, Madhukar (Artesyn)
• [U-Boot] [PATCH 3/3] ARM: kwimage: fix v0 format   Prafulla Wadaskar
• [U-Boot] [PATCH v3 1/2] mmc: Board-specific MMC power initializations   Igor Grinberg
• [U-Boot] [PATCH v3 2/2] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Igor Grinberg
• [U-Boot] [PATCH v2 2/4] Exynos5800: Add support for Exynos5800   Lukasz Majewski
• [U-Boot] Need FTP client support in U-Boot   Mythri, Madhukar (Artesyn)
• [U-Boot] [PATCH v2 3/4] odroid: make some macros common   Lukasz Majewski
• [U-Boot] [PATCH v2 4/4] Odroid-XU3: Add support for Odroid-XU3   Lukasz Majewski
• [U-Boot] [PATCH] MAINTAINERS: fix Pantelis Antoniou email address   Igor Grinberg
• [U-Boot] [PATCH 2/2] arm:imx-common add function prototype for gpr set   Stefano Babic
• [U-Boot] [PATCH 00/11] Add support for CompuLab cm-t3517 SoM   Igor Grinberg
• [U-Boot] [PATCH 01/11] am335x: make get_board_rev() function weak   Igor Grinberg
• [U-Boot] [PATCH 02/11] compulab: refactor board revision handling   Igor Grinberg
• [U-Boot] [PATCH 03/11] omap3: cm-t35: move the USB hub reset code   Igor Grinberg
• [U-Boot] [PATCH 04/11] omap3: cm-t35: extract the splash code from board   Igor Grinberg
• [U-Boot] [PATCH 05/11] omap3: cm-t35: move the SMC911x code   Igor Grinberg
• [U-Boot] [PATCH 06/11] omap3: cm-t35: move get_board_serial() fallback   Igor Grinberg
• [U-Boot] [PATCH 07/11] omap: hsmmc: assume cd gpio is active low   Igor Grinberg
• [U-Boot] [PATCH 08/11] omap3: cm-t3517: add basic board support   Igor Grinberg
• [U-Boot] [PATCH 09/11] omap3: cm-t3517: add USB support   Igor Grinberg
• [U-Boot] [PATCH 10/11] omap3: cm-t3517: add Ethernet support   Igor Grinberg
• [U-Boot] [PATCH 11/11] omap3: cm-t3517: add LCD/DVI and splash support   Igor Grinberg
• [U-Boot] [PATCH v3] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Stefano Babic
• [U-Boot] [PATCH v1] ppc: Fix ppc4xx CONFIG_SYS_GENERIC_BOARD   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 1/5] imx: gpt: Add High frequency clock source support for GPT   Stefano Babic
• [U-Boot] [PATCH v3 2/5] imx: mx6sl: Add perclk_clk_sel bit define in CCM   Stefano Babic
• [U-Boot] [PATCH v3 3/5] imx: mx6: Change the get_ipg_per_clk for OSC 24Mhz source   Stefano Babic
• [U-Boot] [PATCH v3 4/5] imx: mx6sl: Set the preclk clock source to OSC 24Mhz   Stefano Babic
• [U-Boot] [PATCH v3 5/5] imx: mx6: Enable high frequency clock source for GPT   Stefano Babic
• [U-Boot] [PATCH v2] imximage: Fix the bootdata.size calculation   Stefano Babic
• [U-Boot] [PATCH v3 1/2] imx: mx6sl: Add IOMUX setting for USDHC1-3   Stefano Babic
• [U-Boot] [PATCH v3 2/2] imx: mx6slevk: Add support for USDHC1 and USDHC3 slots   Stefano Babic
• [U-Boot] [PATCH v3] imx: mx6 sabreauto: Add board support for USB EHCI   Stefano Babic
• [U-Boot] [PATCH v2] arm, imx, spi: detect spi flash again on aristainetos board   Stefano Babic
• [U-Boot] [PATCH v3] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Soeren Moch
• [U-Boot] [PATCH] fs: make it possible to read the filesystem UUID   Christian Gmeiner
• [U-Boot] [PATCH v3] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Stefano Babic
• [U-Boot] [PATCH v3] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Fabio Estevam
• [U-Boot] [PATCH 1/5] imx:mx6sxsabresd add usb support   Stefano Babic
• [U-Boot] [PATCH v4] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Soeren Moch
• [U-Boot] [PATCH 0/2] Enable raw initrd support for TI boards   Guillaume GARDET
• [U-Boot] [PATCH 1/2] ARM: TI: Enable raw initrd support   Guillaume GARDET
• [U-Boot] [PATCH 2/2] ARM: TI: omap3: remove raw initrd support in omap3_igep00x0 config file since it is now in ti_armv7_common.h   Guillaume GARDET
• [U-Boot] [PATCH 1/5] imx:mx6sxsabresd add usb support   Peng Fan
• [U-Boot] [PATCH v2 0/3] Serial Flash: call spi_flash_free more coherently   Valentin Longchamp
• [U-Boot] [PATCH v2 1/3] env_sf: generalize call to spi_flash_free after accesses   Valentin Longchamp
• [U-Boot] [PATCH v2 2/3] cmd_sf: add 'release' command   Valentin Longchamp
• [U-Boot] [PATCH v2 3/3] km_arm: call 'sf release' in the newenv and update scripts   Valentin Longchamp
• [U-Boot] Can't find -lgcc   Brad Andrews
• [U-Boot] [PATCH 0/9] sun6i: dram-init & SPL support   Hans de Goede
• [U-Boot] [PATCH 1/9] sun6i: Add new p2wi controller driver   Hans de Goede
• [U-Boot] [PATCH 2/9] sun6i: Add basic axp221 driver   Hans de Goede
• [U-Boot] [PATCH 3/9] sun6i: Add clock functions needed for SPL / DRAM init   Hans de Goede
• [U-Boot] [PATCH 4/9] sun6i: Add cpucfg register definitions   Hans de Goede
• [U-Boot] [PATCH 5/9] sun4i: Rename dram files to dram_sun4i.x   Hans de Goede
• [U-Boot] [PATCH 6/9] sun6i: Add dram initialization code   Hans de Goede
• [U-Boot] [PATCH 7/9] sun6i: Poke magic sram controller register to avoid cache issues   Hans de Goede
• [U-Boot] [PATCH 8/9] sun6i: Enable SPL   Hans de Goede
• [U-Boot] [PATCH 9/9] sun6i: Add Mele M9 board   Hans de Goede
• [U-Boot] Please fix warnings on ARM Samsung boards   Masahiro YAMADA
• [U-Boot] Query on the ci_udc driver for USB client implementation   Fabio Estevam
• [U-Boot] [linux-sunxi] [PATCH 1/9] sun6i: Add new p2wi controller driver   Chen-Yu Tsai
• [U-Boot] [linux-sunxi] [PATCH 5/9] sun4i: Rename dram files to dram_sun4i.x   Chen-Yu Tsai
• [U-Boot] [linux-sunxi] [PATCH 4/9] sun6i: Add cpucfg register definitions   Chen-Yu Tsai
• [U-Boot] [U-boot] [Patch 0/2] keystone2: change default boot mode to ubi   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 1/2] ks2_evm: configs: fix UBI volume name   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 2/2] keystone2: change default boot mode to ubi   Ivan Khoronzhuk
• [U-Boot] [PULL] u-boot-mpc5xxx / master   Tom Rini
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] [PATCH] mvebu_mmc: Speed up access time   Mario Schuknecht
• [U-Boot] [PATCH] fs: make it possible to read the filesystem UUID   Stephen Warren
• [U-Boot] buildman: using wrong libgcc.a   Simon Glass
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Scott Wood
• [U-Boot] [PATCH v2] mtd: nand: allow to skip BBT scanning during NAND inititialization   Scott Wood
• [U-Boot] [PATCH] nand: reinstate lazy bad block scanning   Scott Wood
• [U-Boot] [PATCH v2] mtd: nand: allow to skip BBT scanning during NAND inititialization   Scott Wood
• [U-Boot] Can't find -lgcc   Anatolij Gustschin
• [U-Boot] [U-boot] [Patch] dma: keystone_nav: remove spurious qm_cfg verification   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch] keystone2: replace printf on puts where it's possible   Ivan Khoronzhuk
• [U-Boot] Displaying splash screen on BeagleBone Black and LCD   Tamás Bondár
• [U-Boot] [PATCH] serial: sh: Add support R8A7793   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] net: sh-eth: Add support R8A7793   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] serial: sh: r8a7794: Add support external clock   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/3] net: sh-eth: Remove definition of RX_DESC_SIZE and TX_DESC_SIZE   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/3] net: sh-eth: Use memalign instead of orignal memroy alignment function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/3] net: sh-eth: Add cache writeback control after setting bit of DMA descriptor   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] usb: ehci: rmobile: Add support R8A7793   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2] usb: ehci: rmobile: Collect up address data   Nobuhiro Iwamatsu
• [U-Boot] Please fix warnings on ARM Samsung boards   Minkyu Kang
• [U-Boot] [PATCH v2 2/4] Exynos5800: Add support for Exynos5800   Hyungwon Hwang
• [U-Boot] [PATCH v2 3/4] odroid: make some macros common   Hyungwon Hwang
• [U-Boot] [RFC] x86: Intel FSP integration   Simon Glass
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] Pull request: u-boot-uniphier/master   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [PATCH v6 0/6] fs: fat/ext4/sandbox - Deal with files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v6 1/6] sandbox: script for testing sandbox/ext4/fat/fs commands   Suriyan Ramasami
• [U-Boot] [PATCH v6 2/6] fs: interface changes to accomodate files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v6 3/6] fat: interface changes to accomodate files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v6 4/6] ext4: interface changes to accomodate files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v6 5/6] sandbox: Use md5sum and fatwrite to enable testing of fs commands   Suriyan Ramasami
• [U-Boot] [PATCH v6 6/6] sandbox: interface changes to accomodate files greater than 2GB   Suriyan Ramasami
• [U-Boot] verifying & signing   Srinivasan S
• [U-Boot] [RFC] x86: Intel FSP integration   Bin Meng
• [U-Boot] [linux-sunxi] [PATCH 5/9] sun4i: Rename dram files to dram_sun4i.x   Julian Calaby
• [U-Boot] [PATCH] i2c: rcar_i2c: Fix order of restart and clear status   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/4] exynos5: fix GPIO information of exynos5420   Jaehoon Chung
• [U-Boot] Query on the ci_udc driver for USB client implementation   Marek Vasut
• [U-Boot] [PATCH 2/4] Exynos5800: Add support for Exynos5800   Jaehoon Chung
• [U-Boot] [PATCH 1/2] usb: ehci: rmobile: Add support R8A7793   Marek Vasut
• [U-Boot] [PATCH 2/4] Exynos5800: Add support for Exynos5800   Hyungwon Hwang
• [U-Boot] [PATCH 1/5] usb: s3c-otg: Remove useless include   Marek Vasut
• [U-Boot] [PATCH 2/5] usb: s3c-otg: Encapsulate PHY control   Marek Vasut
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Marek Vasut
• [U-Boot] [PATCH 4/5] usb: s3c-otg: Allow custom gusbcfg   Marek Vasut
• [U-Boot] [PATCH 5/5] arm: socfpga: Add example UDC config   Marek Vasut
• [U-Boot] [PATCH v2 0/4] Adds support for Exynos5422 odroid xu3 board   Jaehoon Chung
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH 1/4] exynos5: fix GPIO information of exynos5420   Hyungwon Hwang
• [U-Boot] [PATCH v2] u_qe: add u_qe_upload_firmware for u_qe   Zhao Qiang
• [U-Boot] verified boot of beaglebone black   Srinivasan S
• [U-Boot] [linux-sunxi] [PATCH 1/9] sun6i: Add new p2wi controller driver   Olliver Schinagl
• [U-Boot] verified boot of beaglebone black   Simon Glass
• [U-Boot] [PATCH 1/2] sunxi: Request card detect gpio   Simon Glass
• [U-Boot] [PATCH 2/2] sunxi: Request USB vbus gpio   Simon Glass
• [U-Boot] [PATCH v6 0/6] fs: fat/ext4/sandbox - Deal with files greater than 2GB   Simon Glass
• [U-Boot] [linux-sunxi] [PATCH 1/9] sun6i: Add new p2wi controller driver   Chen-Yu Tsai
• [U-Boot] [PATCH] fs: make it possible to read the filesystem UUID   Simon Glass
• [U-Boot] verifying & signing   Simon Glass
• [U-Boot] [RFC PATCH v1 1/2] kgdb: add breakpoint support   Simon Glass
• [U-Boot] [RFC PATCH v1 2/2] arm:kgdb add KGDB support for arm platform   Simon Glass
• [U-Boot] [RFC] x86: Intel FSP integration   Simon Glass
• [U-Boot] [PATCH 1/2] usb: ehci: rmobile: Add support R8A7793   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] board/freescale: use generic board architecture for p1025-twr   ying.zhang at freescale.com
• [U-Boot] [PATCH] common.h: Add prototype of arch_preboot_os   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] usb: rmobile: Use ARRAY_SIZE(usb_base_address) instead of CONFIG_USB_MAX_CONTROLLER_COUNT   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] imx: mx6slevk: Change default mmcdev to USDHC2 device   Ye.Li
• [U-Boot] [PATCH] arm: rmobile: Add support gose board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v3 1/2] mmc: fsl_esdhc: Update esdhc driver for iMX6SX   Ye.Li
• [U-Boot] [PATCH v3 2/2] imx: mx6sxsabresd: Add board support for USDHC2 and USDHC3   Ye.Li
• [U-Boot] verified boot of beaglebone black   Srinivasan S
• [U-Boot] [PATCH v2 0/3] imx:mx6 add usb support   Peng Fan
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Peng Fan
• [U-Boot] [PATCH v2 2/3] imx:mx6sxsabresd add usb support   Peng Fan
• [U-Boot] [PATCH v2 3/3] imx:mx6slevk add usb support   Peng Fan
• [U-Boot] [PATCH] common.h: Add prototype of arch_preboot_os   Igor Grinberg
• [U-Boot] [PATCH v2 1/4] imx: mx6sabresd/sabreauto: Move MX6Q/DL DDR and FDT configs to defconfig   Li Ye-B37916
• [U-Boot] [PATCH 1/2] usb: ehci: rmobile: Add support R8A7793   Marek Vasut
• [U-Boot] [PATCH 1/4] imx: mx6: Add support for MX6 plugin images   Ye.Li
• [U-Boot] [PATCH 2/4] imx: mx6q/dlarm2: Add support for building plugin image   Ye.Li
• [U-Boot] [PATCH 3/4] imx: mx6slevk: Add support for building plugin image   Ye.Li
• [U-Boot] [PATCH 4/4] imx: mx6sxsabresd: Add support for building plugin image   Ye.Li
• [U-Boot] [PATCH v2 3/4] odroid: make some macros common   Lukasz Majewski
• [U-Boot] wrong uboot type in uboot binary   pegasus711
• [U-Boot] [PATCH 2/4] imx: mx6slevk: Add PMIC Pfuze support   Li Ye-B37916
• [U-Boot] [PATCH 2/3] exynos4/4x12: gpio: use gpio extra base addresses   Przemyslaw Marczak
• [U-Boot] [PATCH 2/4] imx: mx6slevk: Add PMIC Pfuze support   Li Ye-B37916
• [U-Boot] verifying & signing   Srinivasan S
• [U-Boot] verifying & signing   Srinivasan S
• [U-Boot] [PATCH v2 0/3] imx:mx6 add usb support   Marek Vasut
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Marek Vasut
• [U-Boot] [PATCH 2/3] exynos4/4x12: gpio: use gpio extra base addresses   Minkyu Kang
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Peng Fan
• [U-Boot] [PATCH v2 3/4] odroid: make some macros common   Minkyu Kang
• [U-Boot] [PATCH] doc: fix documentation of output directory   Timo Ketola
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Marek Vasut
• [U-Boot] [PATCH 0/6] Collect utility macros to include/linux/kernel.h synced with Linux   Masahiro Yamada
• [U-Boot] [PATCH 1/6] replace DIV_ROUND with DIV_ROUND_CLOSEST   Masahiro Yamada
• [U-Boot] [PATCH 2/6] include/common.h: remove DIV_ROUND definition   Masahiro Yamada
• [U-Boot] [PATCH 3/6] include: move various macros to include/linux/kernel.h   Masahiro Yamada
• [U-Boot] [PATCH 4/6] linux/kernel.h: import more macros   Masahiro Yamada
• [U-Boot] [PATCH 5/6] linux/kernel.h: add typechecking to roundup macro   Masahiro Yamada
• [U-Boot] [PATCH 6/6] linux/kernel.h: sync min, max, min3, max3 macros with Linux   Masahiro Yamada
• [U-Boot] [PATCH 2/4] imx: mx6q/dlarm2: Add support for building plugin image   Otavio Salvador
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Jeroen Hofstee
• [U-Boot] [PATCH] powerpc/P5040DS: enable SATA support   shh.xie at gmail.com
• [U-Boot] [PATCH v2 0/3] imx:mx6 add usb support   Peng Fan
• [U-Boot] [PATCH v2 0/3] imx:mx6 add usb support   Marek Vasut
• [U-Boot] [RFC PATCH v1 1/2] kgdb: add breakpoint support   Peng Fan
• [U-Boot] [RFC PATCH v1 2/2] arm:kgdb add KGDB support for arm platform   Peng Fan
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Peng Fan
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Peng Fan
• [U-Boot] Query on the ci_udc driver for USB client implementation   Sanchayan Maity
• [U-Boot] [PATCH 2/4] imx: mx6slevk: Add PMIC Pfuze support   Przemyslaw Marczak
• [U-Boot] [U-boot] [Patch 0/2] keystone2: config: customize uboot environment   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 1/2] keystone2: config: restructure handling of default env settings   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 2/2] keystone2: config: align names of images with MCSDK   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch] ks2_evm: config: enable fatload command   Tom Rini
• [U-Boot] [U-boot] [Patch] ks2_evm: config: enable fatload command   Ivan Khoronzhuk
• [U-Boot] [PATCH 1/4] x86: Display more detailed CPU information on boot   Bin Meng
• [U-Boot] [PATCH 2/4] x86: Do TSC MSR calibration only for known/supported CPUs   Bin Meng
• [U-Boot] [PATCH 3/4] x86: Add quick TSC calibration via PIT   Bin Meng
• [U-Boot] [PATCH 4/4] x86: Save TSC frequency in the global data   Bin Meng
• [U-Boot] [PATCH v6 0/6] fs: fat/ext4/sandbox - Deal with files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH 0/6] kbuild, kconfig: sync with Linux 3.18-rc1   Tom Rini
• [U-Boot] [RFC] Removal of CREDITS   Tom Rini
• [U-Boot] Inconsistency between $filesize and commands which accept numeric params   Tom Rini
• [U-Boot] [PATCH 1/4] imx: mx6: Add support for MX6 plugin images   Fabio Estevam
• [U-Boot] Inconsistency between $filesize and commands which accept numeric params   Ian Campbell
• [U-Boot] [PATCH v2 2/2] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Tom Rini
• [U-Boot] [PATCH v2 1/2] mmc: Board-specific MMC power initializations   Tom Rini
• [U-Boot] [PATCH 2/4] imx: mx6slevk: Add PMIC Pfuze support   Przemyslaw Marczak
• [U-Boot] [PATCH 4/4] imx: mx6: Set Pfuze mode to decrease power number for DSM   Przemyslaw Marczak
• [U-Boot] [PATCH] power: LP8720 regulator support   Tom Rini
• [U-Boot] Building fw_printenv (e.g. make env) failing   Tom Rini
• [U-Boot] [RFC PATCH] tricorder: rewrite tricordereeprom command   Andreas Bießmann
• [U-Boot] [U-boot] [Patch v2] ks2_evm: config: enable fatload command   Ivan Khoronzhuk
• [U-Boot] [PATCH 1/2] ubi: enable error reporting in initialization   Andrew Ruder
• [U-Boot] [PATCH 2/2] mtd: nor: initialize writebufsize field   Andrew Ruder
• [U-Boot] [PATCH] ext4: goni: Modify dfu_alt_info's file names to have absolute path   Lukasz Majewski
• [U-Boot] [PATCH] dfu: thor: fix: Modify dfu_get_alt() function to support absolute paths   Lukasz Majewski
• [U-Boot] Query on the ci_udc driver for USB client implementation   Lukasz Majewski
• [U-Boot] [PATCH 01/11] am335x: make get_board_rev() function weak   Tom Rini
• [U-Boot] [PATCH 02/11] compulab: refactor board revision handling   Tom Rini
• [U-Boot] [PATCH 03/11] omap3: cm-t35: move the USB hub reset code   Tom Rini
• [U-Boot] [PATCH 04/11] omap3: cm-t35: extract the splash code from board   Tom Rini
• [U-Boot] [PATCH 05/11] omap3: cm-t35: move the SMC911x code   Tom Rini
• [U-Boot] [PATCH 06/11] omap3: cm-t35: move get_board_serial() fallback   Tom Rini
• [U-Boot] [PATCH 07/11] omap: hsmmc: assume cd gpio is active low   Tom Rini
• [U-Boot] [PATCH 09/11] omap3: cm-t3517: add USB support   Tom Rini
• [U-Boot] [PATCH 10/11] omap3: cm-t3517: add Ethernet support   Tom Rini
• [U-Boot] [PATCH 11/11] omap3: cm-t3517: add LCD/DVI and splash support   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: TI: Enable raw initrd support   Tom Rini
• [U-Boot] [PATCH 2/2] ARM: TI: omap3: remove raw initrd support in omap3_igep00x0 config file since it is now in ti_armv7_common.h   Tom Rini
• [U-Boot] [PATCH 08/11] omap3: cm-t3517: add basic board support   Tom Rini
• [U-Boot] [U-boot] [Patch 1/2] ks2_evm: configs: fix UBI volume name   Tom Rini
• [U-Boot] [U-boot] [Patch 2/2] keystone2: change default boot mode to ubi   Tom Rini
• [U-Boot] [U-boot] [Patch] dma: keystone_nav: remove spurious qm_cfg verification   Tom Rini
• [U-Boot] [U-boot] [Patch] keystone2: replace printf on puts where it's possible   Tom Rini
• [U-Boot] [U-boot] [Patch 2/2] keystone2: config: align names of images with MCSDK   Tom Rini
• [U-Boot] [U-boot] [Patch 1/2] keystone2: config: restructure handling of default env settings   Tom Rini
• [U-Boot] [RFC] Removal of CREDITS   Tom Rini
• [U-Boot] [U-boot] [Patch v2] ks2_evm: config: enable fatload command   Tom Rini
• [U-Boot] mkimage and load addresses beyond 4 Gb   John Jacques
• [U-Boot] [U-boot] [Patch] keystone2: replace printf on puts where it's possible   Ivan Khoronzhuk
• [U-Boot] [PATCH] dfu: thor: fix: Modify dfu_get_alt() function to support absolute paths   Marek Vasut
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Marek Vasut
• [U-Boot] [PATCH] power: LP8720 regulator support   Przemyslaw Marczak
• [U-Boot] [PATCH] power: LP8720 regulator support   Przemyslaw Marczak
• [U-Boot] [PATCH v2 1/2] mmc: Board-specific MMC power initializations   Igor Grinberg
• [U-Boot] [PATCH v2 1/2] mmc: Board-specific MMC power initializations   Tom Rini
• [U-Boot] [PATCH] fs: make it possible to read the filesystem UUID   Simon Glass
• [U-Boot] [U-boot] [Patch] ks2_evm: board: remove sprintf for simple string   Ivan Khoronzhuk
• [U-Boot] [PATCH v6 2/6] fs: interface changes to accomodate files greater than 2GB   Pavel Machek
• [U-Boot] [PATCH 1/5] usb: s3c-otg: Remove useless include   Pavel Machek
• [U-Boot] [PATCH 2/5] usb: s3c-otg: Encapsulate PHY control   Pavel Machek
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Pavel Machek
• [U-Boot] [PATCH 4/5] usb: s3c-otg: Allow custom gusbcfg   Pavel Machek
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Jeroen Hofstee
• [U-Boot] [PATCH 6/6] linux/kernel.h: sync min, max, min3, max3 macros with Linux   Pavel Machek
• [U-Boot] [PATCH 5/5] arm: socfpga: Add example UDC config   Pavel Machek
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] please pull u-boot-samsung master   Tom Rini
• [U-Boot] Pull request: u-boot-staging   Tom Rini
• [U-Boot] [PATCH 5/5] arm: socfpga: Add example UDC config   Marek Vasut
• [U-Boot] [PATCH v3 1/3] mtd, spi: add MTD layer driver   Jagan Teki
• [U-Boot] Inconsistency between $filesize and commands which accept numeric params   Wolfgang Denk
• [U-Boot] [PATCH v3 2/3] mtd, nand: move common functions from cmd_nand.c to common place   Jagan Teki
• [U-Boot] mkimage and load addresses beyond 4 Gb   Wolfgang Denk
• [U-Boot] Inconsistency between $filesize and commands which accept numeric params   Tom Rini
• [U-Boot] [PATCH 5/5] arm: socfpga: Add example UDC config   Pavel Machek
• [U-Boot] Inconsistency between $filesize and commands which accept numeric params   Wolfgang Denk
• [U-Boot] [PATCH v2 00/12] spi: sf: ICH SPI driver fix and flash params update   Jagan Teki
• [U-Boot] [PATCH v3 1/3] mtd, spi: add MTD layer driver   Daniel Schwierzeck
• [U-Boot] [PATCH v6 2/6] fs: interface changes to accomodate files greater than 2GB   Suriyan Ramasami
• [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Jagan Teki
• [U-Boot] [PATCH] arm: rmobile: Add support R8A7793   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh/rmobile   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] common.h: Add prototype of arch_preboot_os   Nobuhiro Iwamatsu
• [U-Boot] Inconsistency between $filesize and commands which accept numeric params   Tom Rini
• [U-Boot] Inconsistency between $filesize and commands which accept numeric params   Wolfgang Denk
• [U-Boot] Inconsistency between $filesize and commands which accept numeric params   Tom Rini
• [U-Boot] [PATCH v3 1/3] i2c: use __weak   Tom Rini
• [U-Boot] [PATCH v2, rebased 3/3] serial: add prototypes for init functions   Tom Rini
• [U-Boot] [PATCH 1/5] sparc: Use nicer prompt for board select menu   Tom Rini
• [U-Boot] [PATCH 2/5] sparc: move CONFIG_{LEON, LEON2, LEON3} to Kconfig   Tom Rini
• [U-Boot] [PATCH 3/5] sparc: merge arch/sparc/cpu/*/config.mk to arch/sparc/config.mk   Tom Rini
• [U-Boot] [PATCH 4/5] sparc: merge CONFIG_SYS_CPU and CONFIG_SYS_VENDOR defines   Tom Rini
• [U-Boot] [PATCH 5/5] sparc: move CONFIG_SYS_TEXT_BASE to Kconfig   Tom Rini
• [U-Boot] [PATCH v2] kbuild: do not hide clang warnings during build with W=1   Tom Rini
• [U-Boot] [PATCH] Fix cosmetic issues in mkimage manpage   Tom Rini
• [U-Boot] [PATCH] MAINTAINERS: fix Pantelis Antoniou email address   Tom Rini
• [U-Boot] [PATCH 3/3] ARM: kwimage: fix v0 format   Tom Rini
• [U-Boot] [PATCH v2, rebased 2/3] arm926ejs: cache: use __weak   Tom Rini
• [U-Boot] [PATCH] tools/env: Fix environment size and CRC on 64-bit hosts   Dominic Sacré
• [U-Boot] mkimage and load addresses beyond 4 Gb   Simon Glass
• [U-Boot] [PATCH v6 2/6] fs: interface changes to accomodate files greater than 2GB   Simon Glass
• [U-Boot] [PATCH v6 1/6] sandbox: script for testing sandbox/ext4/fat/fs commands   Simon Glass
• [U-Boot] [PATCH v6 5/6] sandbox: Use md5sum and fatwrite to enable testing of fs commands   Simon Glass
• [U-Boot] [PATCH v2 7/9] dm: at91: Convert snapper9260 to use driver model   Simon Glass
• [U-Boot] [PATCH v2 00/12] spi: sf: ICH SPI driver fix and flash params update   Bin Meng
• [U-Boot] SPL (Secondary Program Loader) on iMX6SL   John Tobias
• [U-Boot] verifying & signing - issue in generating private key & ceritficate containing public key   Srinivasan S
• [U-Boot] [PATCH v2] mtd: nand: allow to skip BBT scanning during NAND inititialization   Masahiro Yamada
• [U-Boot] [PATCH] nand: reinstate lazy bad block scanning   Masahiro Yamada
• [U-Boot] [PATCH v3 0/2] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
• [U-Boot] [PATCH v3 1/2] exynos5: fix GPIO information of exynos5420   Hyungwon Hwang
• [U-Boot] [PATCH v3 2/2] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH 0/6] kbuild, kconfig: sync with Linux 3.18-rc1   Masahiro Yamada
• [U-Boot] [PATCH 6/6] linux/kernel.h: sync min, max, min3, max3 macros with Linux   Masahiro Yamada
• [U-Boot] verifying & signing - issue in generating private key & ceritficate containing public key   Simon Glass
• [U-Boot] [PATCH] ARM: UniPhier: reset on-board devices on start-up   Masahiro Yamada
• [U-Boot] [PATCH v6] net/phy: Add support for CS4315/CS4340 PHY   Shengzhou Liu
• [U-Boot] [PATCH v2] mtd: nand: allow to skip BBT scanning during NAND inititialization   Scott Wood
• [U-Boot] [PATCH] nand: reinstate lazy bad block scanning   Scott Wood
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Peng Fan
• [U-Boot] [PATCH 6/6] linux/kernel.h: sync min, max, min3, max3 macros with Linux   Marek Vasut
• [U-Boot] [PATCH] MAINTAINERS: CFI flash maintainership only includes the CFI related files   Heiko Schocher
• [U-Boot] [PATCH 1/2] ubi: enable error reporting in initialization   Heiko Schocher
• [U-Boot] [PATCH 2/2] mtd: nor: initialize writebufsize field   Heiko Schocher
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Heiko Schocher
• [U-Boot] [PATCH] doc: fix documentation of output directory   Masahiro Yamada
• [U-Boot] at91, usb, dfu: add dfu support for at91 boards   Heiko Schocher
• [U-Boot] at91, usb, dfu: add dfu support for at91 boards   Bo Shen
• [U-Boot] [PATCH v2 6/6] linux/kernel.h: sync min, max, min3, max3 macros with Linux   Masahiro Yamada
• [U-Boot] [PATCH 6/6] linux/kernel.h: sync min, max, min3, max3 macros with Linux   Masahiro Yamada
• [U-Boot] at91, usb, dfu: add dfu support for at91 boards   Heiko Schocher
• [U-Boot] [PATCH 6/6] linux/kernel.h: sync min, max, min3, max3 macros with Linux   Marek Vasut
• [U-Boot] [PATCH] nand: reinstate lazy bad block scanning   Masahiro Yamada
• [U-Boot] [PATCH] doc: fix documentation of output directory   Timo Ketola
• [U-Boot] [PATCH 6/6] linux/kernel.h: sync min, max, min3, max3 macros with Linux   Masahiro Yamada
• [U-Boot] [PATCH 1/4] imx: mx6: Add support for MX6 plugin images   Li Ye-B37916
• [U-Boot] [PATCH v2] imx: mx6: Add support for MX6 plugin images   Ye.Li
• [U-Boot] [PATCH v2 2/4] imx: mx6q/dlarm2: Add support for building plugin image   Ye.Li
• [U-Boot] [PATCH v2 3/4] imx: mx6slevk: Add support for building plugin image   Ye.Li
• [U-Boot] [PATCH v2 4/4] imx: mx6sxsabresd: Add support for building plugin image   Ye.Li
• [U-Boot] [PATCH 2/4] imx: mx6slevk: Add PMIC Pfuze support   Li Ye-B37916
• [U-Boot] [PATCH 2/4] imx: mx6slevk: Add PMIC Pfuze support   Li Ye-B37916
• [U-Boot] [PATCH v2] imx: mx6: Add support for MX6 plugin images   Stefano Babic
• [U-Boot] [PATCH] mx6: video_skip: Fix crash on NULL pointer   picmaster at mail.bg
• [U-Boot] [PATCH 6/6] linux/kernel.h: sync min, max, min3, max3 macros with Linux   Marek Vasut
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Marek Vasut
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Peng Fan
• [U-Boot] [PATCH] arm: am335x: net: pxm2: disable rgmii internal delay mode   Heiko Schocher
• [U-Boot] [PATCH v1] ppc: Fix ppc4xx CONFIG_SYS_GENERIC_BOARD   Stefan Roese
• [U-Boot] [PATCH 2/4] imx: mx6slevk: Add PMIC Pfuze support   Przemyslaw Marczak
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH 4/4] imx: mx6: Set Pfuze mode to decrease power number for DSM   Li Ye-B37916
• [U-Boot] [PATCH 2/4] imx: mx6slevk: Add PMIC Pfuze support   Przemyslaw Marczak
• [U-Boot] [PATCH v1 0/6] Update gdsys board support   Dirk Eibach
• [U-Boot] [PATCH v2] dfu: thor: fix: Modify dfu_get_alt() function to support absolute paths   Lukasz Majewski
• [U-Boot] [PATCH v3 0/2] Adds support for Exynos5422 odroid xu3 board   Lukasz Majewski
• [U-Boot] Query on the ci_udc driver for USB client implementation   Sanchayan Maity
• [U-Boot] [PATCH v3 1/2] exynos5: fix GPIO information of exynos5420   Lukasz Majewski
• [U-Boot] [PATCH v3 2/2] Odroid-XU3: Add support for Odroid-XU3   Lukasz Majewski
• [U-Boot] [PATCH v1 1/2] ppc4xx: Fix i2c repeated start   Stefan Roese
• [U-Boot] [PATCH v1 2/2] ppc4xx: Handle i2c stuck on combined xfer   Stefan Roese
• [U-Boot] [PATCH v1 0/6] Update gdsys board support   Stefan Roese
• [U-Boot] SPL (Secondary Program Loader) on iMX6SL   Fabio Estevam
• [U-Boot] [PATCH v2] am335x: make get_board_rev() function weak   Igor Grinberg
• [U-Boot] [PATCH v1 0/6] Update gdsys board support   Dirk Eibach
• [U-Boot] [PATCH v2 0/10] sparc: Update SPARC architecture to generic board init   Francois Retief
• [U-Boot] [PATCH v2 01/10] sparc: Add initr function for CMD_AMBAPP command   Francois Retief
• [U-Boot] [PATCH v2 02/10] sparc: Add function to fixup command tables   Francois Retief
• [U-Boot] [PATCH v2 03/10] sparc: Add more LEON3 AMBA vendor/device IDs   Francois Retief
• [U-Boot] [PATCH v2 04/10] sparc: Initial work for generic board-init   Francois Retief
• [U-Boot] [PATCH v2 05/10] sparc: Use microseconds instead of ticks for timeout   Francois Retief
• [U-Boot] [PATCH v2 06/10] sparc: Reworked LEON3 startup for generic board-init   Francois Retief
• [U-Boot] [PATCH v2 07/10] sparc: Major rewrite of the PROM generation code   Francois Retief
• [U-Boot] [PATCH v2 08/10] sparc: Update all LEON3 boards to generic board-init   Francois Retief
• [U-Boot] [PATCH v2 09/10] sparc: Update GRSIM board with memory settings for TSIM   Francois Retief
• [U-Boot] [PATCH v2 10/10] sparc: Cleanup of LEON3 CPU initialisation code   Francois Retief
• [U-Boot] [PATCH 0/6] kbuild, kconfig: sync with Linux 3.18-rc1   Tom Rini
• [U-Boot] [PATCH v1 0/6] Update gdsys board support   Stefan Roese
• [U-Boot] [PATCH 08/11] omap3: cm-t3517: add basic board support   Igor Grinberg
• [U-Boot] Please pull u-boot-sunxi/master into master   Hans de Goede
• [U-Boot] [PATCH 08/11] omap3: cm-t3517: add basic board support   Tom Rini
• [U-Boot] [PATCH v2 8/11] omap3: cm-t3517: add basic board support   Igor Grinberg
• [U-Boot] [PATCH v3 1/3] mtd, spi: add MTD layer driver   Heiko Schocher
• [U-Boot] [PATCH v1 0/3] sparc: Add support for Gaisler GR712RC-BOARD Development Kit   Francois Retief
• [U-Boot] [PATCH v1 1/3] sparc: Make LEON serial drivers use readl/writel macros   Francois Retief
• [U-Boot] [PATCH v1 2/3] sparc: Add MDIO support to GRETH driver   Francois Retief
• [U-Boot] [PATCH v1 3/3] sparc: Add support for gr712rc-board   Francois Retief
• [U-Boot] [PATCH V2 3/4] common: introduce board_preboot_os hook   Stefano Babic
• [U-Boot] [PATCH v3 2/3] mtd, nand: move common functions from cmd_nand.c to common place   Heiko Schocher
• [U-Boot] [PATCH 08/11] omap3: cm-t3517: add basic board support   Igor Grinberg
• [U-Boot] [linux-sunxi] [PATCH 1/9] sun6i: Add new p2wi controller driver   Hans de Goede
• [U-Boot] [PATCH] .travis.yml: build u-boot on travis-ci   Roger Meier
• [U-Boot] [PATCH] nand: reinstate lazy bad block scanning   Heiko Schocher
• [U-Boot] [u-boot][PATCH] omap3_beagle: Fix device tree boot   Roger Quadros
• [U-Boot] [PATCH] usb: ehci: fix Interrupt on Doorbell flag of USBCMD   Masahiro Yamada
• [U-Boot] [u-boot][PATCH] omap3_beagle: Fix device tree boot   Tom Rini
• [U-Boot] [PATCH] doc: fix documentation of output directory   Masahiro YAMADA
• [U-Boot] [u-boot][PATCH] omap3_beagle: Fix device tree boot   Roger Quadros
• [U-Boot] [PATCH 1/2] ubi: enable error reporting in initialization   Andrew Ruder
• [U-Boot] [PATCH] ot1200: fix sf detection   Heiko Schocher
• [U-Boot] [PATCH] .travis.yml: build u-boot on travis-ci   Meier, Roger
• [U-Boot] [PATCH 1/2] ubi: enable error reporting in initialization   Heiko Schocher
• [U-Boot] [u-boot][PATCH] omap3_beagle: Fix device tree boot   Tom Rini
• [U-Boot] [linux-sunxi] [PATCH 4/9] sun6i: Add cpucfg register definitions   Hans de Goede
• [U-Boot] [linux-sunxi] [PATCH 5/9] sun4i: Rename dram files to dram_sun4i.x   Hans de Goede
• [U-Boot] [PATCH v2 0/9] sun6i: Add dram init and SPL support   Hans de Goede
• [U-Boot] [PATCH v2 1/9] sun6i: Add new p2wi controller driver   Hans de Goede
• [U-Boot] [PATCH v2 2/9] sun6i: Add basic axp221 driver   Hans de Goede
• [U-Boot] [PATCH v2 3/9] sun6i: Add clock functions needed for SPL / DRAM init   Hans de Goede
• [U-Boot] [PATCH v2 4/9] sun6i: Add cpucfg register definitions   Hans de Goede
• [U-Boot] [PATCH v2 5/9] sun4i: Rename dram files to dram_sun4i.x   Hans de Goede
• [U-Boot] [PATCH v2 6/9] sun6i: Add dram initialization code   Hans de Goede
• [U-Boot] [PATCH v2 7/9] sun6i: Poke magic sram controller register to avoid cache issues   Hans de Goede
• [U-Boot] [PATCH v2 8/9] sun6i: Enable SPL   Hans de Goede
• [U-Boot] [PATCH v2 9/9] sun6i: Add Mele M9 board   Hans de Goede
• [U-Boot] [PATCH] .travis.yml: build u-boot on travis-ci   Tom Rini
• [U-Boot] Pull request: u-boot-sh/rmobile   Tom Rini
• [U-Boot] Please pull u-boot-ppc4xx/master   Tom Rini
• [U-Boot] Please pull u-boot-sunxi/master into master   Tom Rini
• [U-Boot] [PATCH v2] imx: mx6: Add support for MX6 plugin images   Bill Pringlemeir
• [U-Boot] [PATCH V2 0/4] cm-fx6 updates   Stefano Babic
• [U-Boot] CONFIG_SYS_SPI_ST_ENABLE_WP_PIN   Jagan Teki
• [U-Boot] porting u-boot, MMU question   DaveKucharczyk
• [U-Boot] [PATCH] .travis.yml: build u-boot on travis-ci   Wolfgang Denk
• [U-Boot] porting u-boot, MMU question   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH] .travis.yml: build u-boot on travis-ci   Meier, Roger
• [U-Boot] porting u-boot, MMU question   DaveKucharczyk
• [U-Boot] [PATCH v2] imx: mx6: Add support for MX6 plugin images   Stefano Babic
• [U-Boot] buildman: using wrong libgcc.a   Steve Rae
• [U-Boot] [PATCH] .travis.yml: build u-boot on travis-ci   Daniel Schwierzeck
• [U-Boot] [PATCH v2 1/2] mmc: Board-specific MMC power initializations   Paul Kocialkowski
• [U-Boot] [PATCH v2 2/2] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Paul Kocialkowski
• [U-Boot] [PATCH] power: LP8720 regulator support   Paul Kocialkowski
• [U-Boot] [PATCH v2 1/2] mmc: Board-specific MMC power initializations   Tom Rini
• [U-Boot] buildman: using wrong libgcc.a   Jeroen Hofstee
• [U-Boot] buildman: using wrong libgcc.a (magic -3)   Steve Rae
• [U-Boot] buildman: using wrong libgcc.a (magic -3)   Wolfgang Denk
• [U-Boot] [PATCH v2] mtd, cfi, ubi: add missing writebufsize initialization   Andrew Ruder
• [U-Boot] [PATCH 2/2] mtd: nor: initialize writebufsize field   Andrew Ruder
• [U-Boot] [PATCH v2] ubi: enable error reporting in initialization   Andrew Ruder
• [U-Boot] buildman: using wrong libgcc.a (magic -3)   Steve Rae
• [U-Boot] [PATCH 1/6] dlmalloc: ensure gd is set for early alloc   Rabin Vincent
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH v2] mtd, cfi, ubi: add missing writebufsize initialization   Andrew Ruder
• [U-Boot] [PATCH 6/6] hush: add some tests for quoting   Rabin Vincent
• [U-Boot] porting u-boot, MMU question   Stefano Babic
• [U-Boot] porting u-boot, MMU question   Otavio Salvador
• [U-Boot] [U-Boot,1/2] am335x_evm: Add NOR to Kconfig   Tom Rini
• [U-Boot] [U-Boot,2/2] am335x_evm: Convert NOR_BOOT to Kconfig   Tom Rini
• [U-Boot] twl4030: More voltages on VAUX2 and VAUX3   Tom Rini
• [U-Boot] [U-Boot, v5, 1/1] Enable Android Fastboot support on am335x_evm board   Tom Rini
• [U-Boot] [U-Boot, U-boot, 1/4] ARM: keystone2: keysonte_nav: add support for K2L SoC   Tom Rini
• [U-Boot] [U-Boot, U-boot, 2/4] net: keystone_serdes: add keystone K2L SoC support   Tom Rini
• [U-Boot] [U-Boot, U-boot, 3/4] net: keystone_net: add Keystone2 K2L SoC support   Tom Rini
• [U-Boot] [U-Boot, U-boot, 4/4] board: k2l_evm: add network support   Tom Rini
• [U-Boot] [U-Boot, U-boot] ks2_evm: readme: add k2l evm board information   Tom Rini
• [U-Boot] [U-Boot, U-boot] net: phy: marvell: add errata w/a for 88E151* chips   Tom Rini
• [U-Boot] [U-Boot, 02/11] compulab: refactor board revision handling   Tom Rini
• [U-Boot] [U-Boot, 03/11] omap3: cm-t35: move the USB hub reset code   Tom Rini
• [U-Boot] [U-Boot, 04/11] omap3: cm-t35: extract the splash code from board   Tom Rini
• [U-Boot] [U-Boot,05/11] omap3: cm-t35: move the SMC911x code   Tom Rini
• [U-Boot] [U-Boot, 06/11] omap3: cm-t35: move get_board_serial() fallback   Tom Rini
• [U-Boot] [U-Boot, 07/11] omap: hsmmc: assume cd gpio is active low   Tom Rini
• [U-Boot] [U-Boot,09/11] omap3: cm-t3517: add USB support   Tom Rini
• [U-Boot] [U-Boot,10/11] omap3: cm-t3517: add Ethernet support   Tom Rini
• [U-Boot] [U-Boot, 11/11] omap3: cm-t3517: add LCD/DVI and splash support   Tom Rini
• [U-Boot] [U-Boot,1/2] ARM: TI: Enable raw initrd support   Tom Rini
• [U-Boot] [U-Boot, 2/2] ARM: TI: omap3: remove raw initrd support in omap3_igep00x0 config file since it is now in ti_armv7_common.h   Tom Rini
• [U-Boot] [U-Boot, U-boot, 1/2] ks2_evm: configs: fix UBI volume name   Tom Rini
• [U-Boot] [U-Boot, U-boot, 2/2] keystone2: change default boot mode to ubi   Tom Rini
• [U-Boot] [U-Boot, U-boot] dma: keystone_nav: remove spurious qm_cfg verification   Tom Rini
• [U-Boot] [U-Boot, U-boot, 1/2] keystone2: config: restructure handling of default env settings   Tom Rini
• [U-Boot] [U-Boot, U-boot, 2/2] keystone2: config: align names of images with MCSDK   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2] ks2_evm: config: enable fatload command   Tom Rini
• [U-Boot] [U-Boot, U-boot] ks2_evm: board: remove sprintf for simple string   Tom Rini
• [U-Boot] arm: am335x: net: pxm2: disable rgmii internal delay mode   Tom Rini
• [U-Boot] [U-Boot, v2] am335x: make get_board_rev() function weak   Tom Rini
• [U-Boot] [U-Boot, v2, 8/11] omap3: cm-t3517: add basic board support   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH v6 1/6] sandbox: script for testing sandbox/ext4/fat/fs commands   Suriyan Ramasami
• [U-Boot] buildman: using wrong libgcc.a (magic -3)   Wolfgang Denk
• [U-Boot] [v3 PATCH 02/12] arm, at91: add spi dataflash support for the taurus board   Andreas Bießmann
• [U-Boot] [v3 PATCH 02/12] arm, at91: add spi dataflash support for the taurus board   Andreas Bießmann
• [U-Boot] [v3 PATCH 07/12] mtd: atmel_nand: add missign include   Andreas Bießmann
• [U-Boot] [v3 PATCH 08/12] spl, nand, atmel_nand: add erase one block function   Andreas Bießmann
• [U-Boot] [v3 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support   Andreas Bießmann
• [U-Boot] [v3 PATCH 12/12] arm, spl, at91: add spl support for the corvus board   Andreas Bießmann
• [U-Boot] [v3 PATCH 01/12] spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header   Andreas Bießmann
• [U-Boot] [v3 PATCH 0/12] arm, at91, spl: add spl support for the taurus and corvus boards   Andreas Bießmann
• [U-Boot] [PATCH] arm, at91: generate boot.bin file for all all atmel SoC   Andreas Bießmann
• [U-Boot] [PATCH] ARM: at91 series: convert to generic board   Andreas Bießmann
• [U-Boot] [PATCH v1 3/3] sparc: Add support for gr712rc-board   Masahiro Yamada
• [U-Boot] [PATCH] arm, at91: generate boot.bin file for all all atmel SoC   Masahiro Yamada
• [U-Boot] u-boot latest .tar.bz2 link is missing .tar   Larry Baker
• [U-Boot] [PATCH] arm: ls102xa: Add CCI-400 setting support for Deep Sleep   Alison Wang
• [U-Boot] [PATCH] sunxi: move "select CPU_V7" to ARCH_SUNXI   Masahiro Yamada
• [U-Boot] [PATCH v2 0/2] Follow-up patches for commit 2e07c249a67e (kconfig: arm: introduce symbol for ARM CPUs)   Masahiro Yamada
• [U-Boot] [PATCH v2 1/2] kconfig: arm: select CPU_V7 for some new boards   Masahiro Yamada
• [U-Boot] [PATCH v2 2/2] kconfig: arm: move "armv8" define to arch/arm/Kconfig   Masahiro Yamada
• [U-Boot] [PATCH] ls1021aqds: set the default I2C channel before DDR init   Alison Wang
• [U-Boot] SPL (Secondary Program Loader) on iMX6SL   John Tobias
• [U-Boot] [PATCH v6] net/phy: Add support for CS4315/CS4340 PHY   Shengzhou.Liu at freescale.com
• [U-Boot] [PATCH v3 2/2] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH] board/freescale: use generic board architecture for p1010rdb   ying.zhang at freescale.com
• [U-Boot] [PATCH 0/5] Delete CONFIG_ARM<CPU_NAME> and use CONFIG_CPU_<CPU_NAME>   Masahiro Yamada
• [U-Boot] [PATCH 1/5] ARM: remove CONFIG_ARMV7 defines   Masahiro Yamada
• [U-Boot] [PATCH 2/5] ARM: remove CONFIG_ARM1176 defines   Masahiro Yamada
• [U-Boot] [PATCH 3/5] ARM: remove CONFIG_ARM920T defines   Masahiro Yamada
• [U-Boot] [PATCH 4/5] ARM: remove CONFIG_ARM926EJS defines   Masahiro Yamada
• [U-Boot] [PATCH 5/5] ARM: remove CONFIG_ARM1136 defines   Masahiro Yamada
• [U-Boot] [PATCH 1/5] ARM: remove CONFIG_ARMV7 defines   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] arm: rmobile: Add support gose board   Masahiro Yamada
• [U-Boot] [PATCH v3 3/3] ARM: atmel: add sama5d4ek board support   Masahiro Yamada
• [U-Boot] [PATCH v3 3/3] ARM: atmel: add sama5d4ek board support   Bo Shen
• [U-Boot] [PATCH] arm: rmobile: Add support gose board   Nobuhiro Iwamatsu
• [U-Boot] u-boot latest .tar.bz2 link is missing .tar   Wolfgang Denk
• [U-Boot] [PATCH v1 0/6] Update gdsys board support   Dirk Eibach
• [U-Boot] uboot uImage binary does not boot in Qemu   pegasus711
• [U-Boot] [PATCH v2] arm: rmobile: Add support gose board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/3] arm: rmobile: gose: Add Ethernet support   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/3] arm: rmobile: gose: Add USB support   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/3] arm: rmobile: gose: Add VFAT file system support   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/3] arm: rmobile: koelsch: Remove board_late_init function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/3] arm: rmobile: lager: Remove board_late_init function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/3] arm: rmobile: alt: Remove board_late_init function   Nobuhiro Iwamatsu
• [U-Boot] [v3 PATCH 02/12] arm, at91: add spi dataflash support for the taurus board   Jagan Teki
• [U-Boot] [PATCH 0/4] sh: refactor SuperH Kconfig files   Masahiro Yamada
• [U-Boot] [PATCH 1/4] sh: use more descriptive prompts for board select menu   Masahiro Yamada
• [U-Boot] [PATCH 2/4] sh: move CONFIG_{SH2, SH2A, SH3, SH4} to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 3/4] sh: consolidate CONFIG_SYS_CPU defines   Masahiro Yamada
• [U-Boot] [PATCH 4/4] sh: define CONFIG_CPU_SH4A for some boards   Masahiro Yamada
• [U-Boot] [PATCH 1/2] arm: rmobile: Move sh-i2c of the address defined to common header   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2] arm: rmobile: Move rcar-i2c of the address defined to common header   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2] mtd: nor: initialize writebufsize field   Heiko Schocher
• [U-Boot] [v3 PATCH 0/12] arm, at91, spl: add spl support for the taurus and corvus boards   Heiko Schocher
• [U-Boot] [PATCH v3 1/5] power: pfuze100: Update definitions for buck regulators   Ye.Li
• [U-Boot] [PATCH v3 2/5] imx: mx6sabre common: Factorize the Pfuze init function   Ye.Li
• [U-Boot] [PATCH v3 3/5] imx: mx6sabresd: Use the pfuze common init function   Ye.Li
• [U-Boot] [PATCH v3 4/5] imx: mx6sxsabresd: Use the pfuze common init function   Ye.Li
• [U-Boot] [PATCH v3 5/5] imx: imx6q/dlsabreauto: Add PMIC Pfuze100 support   Ye.Li
• [U-Boot] [PATCH v3 2/2] Odroid-XU3: Add support for Odroid-XU3   Lukasz Majewski
• [U-Boot] Query on the ci_udc driver for USB client implementation   Lukasz Majewski
• [U-Boot] [PATCH 6/6] linux/kernel.h: sync min, max, min3, max3 macros with Linux   Lukasz Majewski
• [U-Boot] [PATCH 1/5] usb: s3c-otg: Remove useless include   Lukasz Majewski
• [U-Boot] [PATCH 2/5] usb: s3c-otg: Encapsulate PHY control   Lukasz Majewski
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Lukasz Majewski
• [U-Boot] [PATCH] test: ums: Add sleep before unmount directory   Lukasz Majewski
• [U-Boot] [PATCH 1/2] blackfin: spi: move spi max chip select to spi.h   Scott Jiang
• [U-Boot] [PATCH 2/2] spi: add common spi3 controller driver   Scott Jiang
• [U-Boot] [PATCH] mtd: sf: Zap ramtron driver   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH] exynos: dts: Correct USB vbus-gpio numbering for Snow   Sjoerd Simons
• [U-Boot] [PATCH] ARM: UniPhier: move DDR related configuration to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v4 0/2] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
• [U-Boot] [PATCH v4 1/2] exynos5: fix GPIO information of exynos5420   Hyungwon Hwang
• [U-Boot] [PATCH v4 2/2] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] arch/arm/lib/board.c - uninitialized vars   Wolfgang Denk
• [U-Boot] [PATCH V2 3/4] common: introduce board_preboot_os hook   Nikita Kiryanov
• [U-Boot] MCF: uninitialized variables   Wolfgang Denk
• [U-Boot] MPC85xx: Uninitialized variables and other problems   Wolfgang Denk
• [U-Boot] sandbox: Uninitialized variable   Wolfgang Denk
• [U-Boot] [PATCH 6/6] linux/kernel.h: sync min, max, min3, max3 macros with Linux   Pavel Machek
• [U-Boot] arch/arm/lib/board.c - uninitialized vars   Heiko Schocher
• [U-Boot] CONFIG_LCD_BMP_RLE8 and MCC200 dead code?   Nikita Kiryanov
• [U-Boot] [board/gdsys/405ep/iocon.c:372]: (error) Uninitialized variable: fpga_features   Wolfgang Denk
• [U-Boot] [board/keymile/km82xx/km82xx.c:311]: (error) Uninitialized variable: psize   Wolfgang Denk
• [U-Boot] [board/muas3001/muas3001.c:270]: (error) Uninitialized variable: psize   Wolfgang Denk
• [U-Boot] [common/cmd_ini.c:137]: (error) Uninitialized variable: line   Wolfgang Denk
• [U-Boot] [drivers/misc/cros_ec.c:704]: (error) Uninitialized variable: req   Wolfgang Denk
• [U-Boot] [drivers/mtd/ubi/eba.c:1275]: (error) Uninitialized variable: aeb   Wolfgang Denk
• [U-Boot] [drivers/net/e1000.c:2251]: (error) Uninitialized variable: phy_data   Wolfgang Denk
• [U-Boot] [drivers/usb/gadget/f_dfu.c:687]: (error) Uninitialized variable: d   Wolfgang Denk
• [U-Boot] [drivers/usb/musb-new/musb_core.c:2166]: (error) Uninitialized variable: musb   Wolfgang Denk
• [U-Boot] [board/gdsys/405ep/iocon.c:372]: (error) Uninitialized variable: fpga_features   Dirk Eibach
• [U-Boot] [fs/zfs/zfs.c:743]: (error) Uninitialized variable: ct   Wolfgang Denk
• [U-Boot] [net/eth.c:64]: (error) Uninitialized variable: skip_state   Wolfgang Denk
• [U-Boot] [PATCH v2] doc: fix documentation of out-of-tree build   Timo Ketola
• [U-Boot] [scripts/docproc.c:398]: (error) Common realloc mistake   Wolfgang Denk
• [U-Boot] SPL (Secondary Program Loader) on iMX6SL   Fabio Estevam
• [U-Boot] [scripts/kconfig/nconf.gui.c:375]: (error) Common realloc mistake   Wolfgang Denk
• [U-Boot] arch/arm/lib/board.c - uninitialized vars   Wolfgang Denk
• [U-Boot] CONFIG_LCD_BMP_RLE8 and MCC200 dead code?   Wolfgang Denk
• [U-Boot] [PATCH] usb_storage: skip all unknown devices when probing   Soeren Moch
• [U-Boot] [drivers/usb/gadget/f_dfu.c:687]: (error) Uninitialized variable: d   Lukasz Majewski
• [U-Boot] [PATCH 0/9] cppcheck cleanup   Wolfgang Denk
• [U-Boot] [PATCH 1/9] cppcheck cleanup: fix nullPointer errors   Wolfgang Denk
• [U-Boot] [PATCH 2/9] board/cogent/lcd.c: fix syntax error   Wolfgang Denk
• [U-Boot] [PATCH 3/9] drivers/usb/host/isp116x-hcd.c: fix syntax error   Wolfgang Denk
• [U-Boot] [PATCH 4/9] drivers/net/uli526x.c: fix syntax error   Wolfgang Denk
• [U-Boot] [PATCH 5/9] common/cmd_fitupd.c: restore corrupted file   Wolfgang Denk
• [U-Boot] [PATCH 6/9] board/matrix_vision/mvblx/sys_eeprom.c: fix buffer overflow   Wolfgang Denk
• [U-Boot] [PATCH 7/9] board/renesas/ecovec/ecovec.c: fix buffer overflow   Wolfgang Denk
• [U-Boot] [PATCH 8/9] ARM: MXS: fix Uninitialized variable error   Wolfgang Denk
• [U-Boot] [PATCH 9/9] board/esd/common/auto_update.c: fix Uninitialized variable   Wolfgang Denk
• [U-Boot] [drivers/usb/gadget/f_dfu.c:687]: (error) Uninitialized variable: d   Wolfgang Denk
• [U-Boot] [PATCH 3/9] drivers/usb/host/isp116x-hcd.c: fix syntax error   Marek Vasut
• [U-Boot] [scripts/docproc.c:398]: (error) Common realloc mistake   Marek Vasut
• [U-Boot] [drivers/usb/musb-new/musb_core.c:2166]: (error) Uninitialized variable: musb   Marek Vasut
• [U-Boot] [PATCH 9/9] board/esd/common/auto_update.c: fix Uninitialized variable   Matthias Fuchs
• [U-Boot] [PATCH 6/9] board/matrix_vision/mvblx/sys_eeprom.c: fix buffer overflow   Michael Jones
• [U-Boot] [PATCH] km/km82xx: remove CONFIG_SYS_RAMBOOT   Holger Brunck
• [U-Boot] [PATCH] sunxi: move "select CPU_V7" to ARCH_SUNXI   Hans de Goede
• [U-Boot] [drivers/mtd/ubi/eba.c:1275]: (error) Uninitialized variable: aeb   Heiko Schocher
• [U-Boot] [PATCH] powerpc, muas3001: remove CONFIG_SYS_RAMBOOT   Heiko Schocher
• [U-Boot] [PATCH 1/2] mx6sabresd: Fix error handling in board_mmc_init()   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6sabresd: Staticize when possible   Fabio Estevam
• [U-Boot] [PATCH] sunxi: move "select CPU_V7" to ARCH_SUNXI   Masahiro YAMADA
• [U-Boot] [PATCH 01/11] arm: omap5: don't enable misc_init_r by default   Felipe Balbi
• [U-Boot] [PATCH 02/11] arm: omap5: tps659038: rename regulator defines   Felipe Balbi
• [U-Boot] [PATCH 03/11] arm: dra7xx: prcm: add missing registers   Felipe Balbi
• [U-Boot] [PATCH 04/11] usb: phy: omap_usb_phy: fix build breakage   Felipe Balbi
• [U-Boot] [PATCH 05/11] arm: omap-common: emif: allow to map memory without interleaving   Felipe Balbi
• [U-Boot] [PATCH 06/11] configs: omap5_common : Boot rootfs from sd card by default   Felipe Balbi
• [U-Boot] [PATCH 07/11] arm: omap5: make hw_init_data weak   Felipe Balbi
• [U-Boot] [PATCH 08/11] arm: omap5: sdram: mark emif_get_ext_phy_ctrl_const_regs __weak   Felipe Balbi
• [U-Boot] [PATCH 09/11] arm: omap_common: expose tps659038 and dra7xx_dplls   Felipe Balbi
• [U-Boot] [PATCH 10/11] arm: omap: add support for am57xx devices   Felipe Balbi
• [U-Boot] [PATCH 11/11] beagle_x15: add board support for Beagle x15   Felipe Balbi
• [U-Boot] [PATCH 11/11] beagle_x15: add board support for Beagle x15   menon.nishanth at gmail.com
• [U-Boot] [PATCH 11/11] beagle_x15: add board support for Beagle x15   Felipe Balbi
• [U-Boot] [PATCH v2 11/11] beagle_x15: add board support for Beagle x15   Felipe Balbi
• [U-Boot] [PATCH v2 11/11] beagle_x15: add board support for Beagle x15   menon.nishanth at gmail.com
• [U-Boot] [drivers/mtd/ubi/eba.c:1275]: (error) Uninitialized variable: aeb   Wolfgang Denk
• [U-Boot] Can i pass pass an environmental variable or argument from command line to build u-boot?   harsha kiran
• [U-Boot] Can i pass pass an environmental variable or argument from command line to build u-boot?   Tom Rini
• [U-Boot] [U-Boot, U-boot] net: phy: marvell: add errata w/a for 88E151* chips   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2] net: phy: marvell: add errata w/a for 88E151* chips   Tom Rini
• [U-Boot] [common/cmd_ini.c:137]: (error) Uninitialized variable: line   Tom Rini
• [U-Boot] Can i pass pass an environmental variable or argument from command line to build u-boot?   harsha kiran
• [U-Boot] [net/eth.c:64]: (error) Uninitialized variable: skip_state   Tom Rini
• [U-Boot] SPL (Secondary Program Loader) on iMX6SL   John Tobias
• [U-Boot] [PATCH] test: ums: Add sleep before unmount directory   Stephen Warren
• [U-Boot] Can i pass pass an environmental variable or argument from command line to build u-boot?   Masahiro YAMADA
• [U-Boot] Can i pass pass an environmental variable or argument from command line to build u-boot?   harsha kiran
• [U-Boot] CONFIG_LCD_BMP_RLE8 and MCC200 dead code?   Nikita Kiryanov
• [U-Boot] [PATCH v3 0/6] Collect utility macros to include/linux/kernel.h synced with Linux   Masahiro Yamada
• [U-Boot] [PATCH v3 1/6] replace DIV_ROUND with DIV_ROUND_CLOSEST   Masahiro Yamada
• [U-Boot] [PATCH v3 2/6] include/common.h: remove DIV_ROUND definition   Masahiro Yamada
• [U-Boot] [PATCH v3 3/6] include: move various macros to include/linux/kernel.h   Masahiro Yamada
• [U-Boot] [PATCH v3 4/6] linux/kernel.h: import more macros   Masahiro Yamada
• [U-Boot] [PATCH v3 5/6] linux/kernel.h: add typechecking to roundup macro   Masahiro Yamada
• [U-Boot] [PATCH v3 6/6] linux/kernel.h: sync min, max, min3, max3 macros with Linux   Masahiro Yamada
• [U-Boot] CONFIG_LCD_BMP_RLE8 and MCC200 dead code?   Simon Glass
• [U-Boot] [common/cmd_ini.c:137]: (error) Uninitialized variable: line   Wolfgang Denk
• [U-Boot] [net/eth.c:64]: (error) Uninitialized variable: skip_state   Wolfgang Denk
• [U-Boot] [PATCH v1 0/6] Update gdsys board support   York Sun
• [U-Boot] [PATCH v3] generic-board: make compile-time noise for non-generic boards   Masahiro Yamada
• [U-Boot] [common/cmd_ini.c:137]: (error) Uninitialized variable: line   Tom Rini
• [U-Boot] [net/eth.c:64]: (error) Uninitialized variable: skip_state   Tom Rini
• [U-Boot] [PATCH 6/6] hush: add some tests for quoting   Simon Glass
• [U-Boot] porting u-boot, MMU question   DaveKucharczyk
• [U-Boot] [PATCH] usb: ehci: fix Interrupt on Doorbell flag of USBCMD   Marek Vasut
• [U-Boot] [PATCH] usb: rmobile: Use ARRAY_SIZE(usb_base_address) instead of CONFIG_USB_MAX_CONTROLLER_COUNT   Marek Vasut
• [U-Boot] [PATCH 0/39] x86: Add support for running on bare hardware   Simon Glass
• [U-Boot] [PATCH 01/39] Move early malloc() to before arch_cpu_init()   Simon Glass
• [U-Boot] [PATCH 02/39] fdt: Add a function to decode a variable-sized u32 array   Simon Glass
• [U-Boot] [PATCH 03/39] dm: serial: Move current serial port pointer to global_data   Simon Glass
• [U-Boot] [PATCH 04/39] dm: gpio: Add a function to read an ID from a list of GPIOs   Simon Glass
• [U-Boot] [PATCH 05/39] x86: Add ifdtool for working with Intel Flash Descriptor ROM images   Simon Glass
• [U-Boot] [PATCH 06/39] x86: config: Move common x86 configs to a common file   Simon Glass
• [U-Boot] [PATCH 07/39] x86: Add processor functions for cpuid and stack pointer   Simon Glass
• [U-Boot] [PATCH 08/39] x86: Remove REALMODE_BASE which is no longer used   Simon Glass
• [U-Boot] [PATCH 09/39] x86: Remove board_init16() call which is not used   Simon Glass
• [U-Boot] [PATCH 10/39] x86: Remove unused early_board_init() call   Simon Glass
• [U-Boot] [PATCH 11/39] x86: Invalidate TLB as early as possible   Simon Glass
• [U-Boot] [PATCH 12/39] x86: Tidy up global descriptor table setup   Simon Glass
• [U-Boot] [PATCH 13/39] x86: Use the standard dram_init() function   Simon Glass
• [U-Boot] [PATCH 14/39] x86: Use the standard arch_cpu_init() function   Simon Glass
• [U-Boot] [PATCH 15/39] x86: Remove unnecessary find_fdt() function   Simon Glass
• [U-Boot] [PATCH 16/39] x86: Fix up some missing prototypes   Simon Glass
• [U-Boot] [PATCH 17/39] x86: Add chromebook_link board   Simon Glass
• [U-Boot] [PATCH 18/39] x86: Save the BIST value on reset   Simon Glass
• [U-Boot] [PATCH 19/39] x86: Build a .rom file which can be flashed to an x86 machine   Simon Glass
• [U-Boot] [PATCH 20/39] x86: Emit post codes in startup code   Simon Glass
• [U-Boot] [PATCH 21/39] x86: chromebook_link: Implement CAR support (cache as RAM)   Simon Glass
• [U-Boot] [PATCH 22/39] x86: Move Coreboot PCI into common cpu area   Simon Glass
• [U-Boot] [PATCH 23/39] x86: Refactor PCI to permit alternate init   Simon Glass
• [U-Boot] [PATCH 24/39] x86: ivybridge: Enable PCI in early init   Simon Glass
• [U-Boot] [PATCH 25/39] x86: pci: Allow configuration before relocation   Simon Glass
• [U-Boot] [PATCH 26/39] x86: ivybridge: Add early LPC init so that serial works   Simon Glass
• [U-Boot] [PATCH 27/39] x86: Tidy up coreboot header usage   Simon Glass
• [U-Boot] [PATCH 28/39] x86: Add clr/setbits functions   Simon Glass
• [U-Boot] [PATCH 29/39] x86: Add msr read/write functions that use a structure   Simon Glass
• [U-Boot] [PATCH 30/39] x86: ivybridge: Perform initial CPU setup   Simon Glass
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Marek Vasut
• [U-Boot] [PATCH 31/39] x86: ivybridge: Check BIST value on boot   Simon Glass
• [U-Boot] [PATCH 32/39] x86: ivybridge: Perform Intel microcode update on boot   Simon Glass
• [U-Boot] [PATCH 33/39] RFC: x86: dts: Add microcode updates for ivybridge CPU   Simon Glass
• [U-Boot] [PATCH 34/39] x86: ivybridge: Add early init for PCH devices   Simon Glass
• [U-Boot] [PATCH 35/39] x86: ivybridge: Add support for early GPIO init   Simon Glass
• [U-Boot] [PATCH 36/39] x86: chromebook_link: Enable GPIO support   Simon Glass
• [U-Boot] [PATCH 37/39] x86: Make show_boot_progress() common   Simon Glass
• [U-Boot] [PATCH 38/39] x86: ivybridge: Add LAPIC support   Simon Glass
• [U-Boot] [PATCH 39/39] x86: ivybridge: Implement SDRAM init   Simon Glass
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Marek Vasut
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Marek Vasut
• [U-Boot] [PATCH 4/5] usb: s3c-otg: Allow custom gusbcfg   Marek Vasut
• [U-Boot] [PATCH] usb_storage: skip all unknown devices when probing   Marek Vasut
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Scott Wood
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Lukasz Majewski
• [U-Boot] [PATCH] test: ums: Add sleep before unmount directory   Lukasz Majewski
• [U-Boot] [PATCH 04/19] dm: pmic: add implementation of driver model pmic uclass   Simon Glass
• [U-Boot] socfpga: mainline cannot boot linux   Dinh Nguyen
• [U-Boot] MPC85xx: Uninitialized variables and other problems   York Sun
• [U-Boot] socfpga: mainline cannot boot linux   Anatolij Gustschin
• [U-Boot] socfpga: mainline cannot boot linux   Dinh Nguyen
• [U-Boot] [PATCH 22/39] x86: Move Coreboot PCI into common cpu area   Bin Meng
• [U-Boot] [PATCH] socfpga_cyclone5.h: fix kernel console argument in default environment   Anatolij Gustschin
• [U-Boot] [PATCH 07/39] x86: Add processor functions for cpuid and stack pointer   Bin Meng
• [U-Boot] [PATCH v1 6/6] mpc83xx: Add gdsys hrcon board   Kim Phillips
• [U-Boot] [PATCH v1 0/6] Update gdsys board support   Kim Phillips
• [U-Boot] [PATCH 22/39] x86: Move Coreboot PCI into common cpu area   Simon Glass
• [U-Boot] [PATCH 07/39] x86: Add processor functions for cpuid and stack pointer   Simon Glass
• [U-Boot] [PATCH v3 0/3] Add board level usb supporrt for mxsxsabresd and mx6slevk   Peng Fan
• [U-Boot] [PATCH v3 1/3] usb:ehci-mx6 add board_usb_phy_mode function   Peng Fan
• [U-Boot] [PATCH v3 2/3] imx:mx6sxsabresd add board level support for usb   Peng Fan
• [U-Boot] [PATCH v3 3/3] imx:mx6slevk add board level support for usb   Peng Fan
• [U-Boot] [PATCH v1] ZFS: Clean up cppcheck warnings where relevant, leaked memory etc   Jorgen Lundman
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Peng Fan
• [U-Boot] [PATCH 22/39] x86: Move Coreboot PCI into common cpu area   Bin Meng
• [U-Boot] [PATCH 22/39] x86: Move Coreboot PCI into common cpu area   Simon Glass
• [U-Boot] [PATCH v5 0/2] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
• [U-Boot] [PATCH v5 1/2] exynos5: fix GPIO information of exynos5420   Hyungwon Hwang
• [U-Boot] [PATCH v5 2/2] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH 22/39] x86: Move Coreboot PCI into common cpu area   Bin Meng
• [U-Boot] [PATCH 1/4] x86: Display more detailed CPU information on boot   Simon Glass
• [U-Boot] [PATCH 1/4] x86: Display more detailed CPU information on boot   Simon Glass
• [U-Boot] [PATCH 2/4] x86: Do TSC MSR calibration only for known/supported CPUs   Simon Glass
• [U-Boot] PHY support issues   Aaron Williams
• [U-Boot] [PATCH 3/4] x86: Add quick TSC calibration via PIT   Simon Glass
• [U-Boot] [PATCH 4/4] x86: Save TSC frequency in the global data   Simon Glass
• [U-Boot] [PATCH 22/39] x86: Move Coreboot PCI into common cpu area   Simon Glass
• [U-Boot] [PATCH 08/39] x86: Remove REALMODE_BASE which is no longer used   Bin Meng
• [U-Boot] [PATCH 09/39] x86: Remove board_init16() call which is not used   Bin Meng
• [U-Boot] [PATCH 10/39] x86: Remove unused early_board_init() call   Bin Meng
• [U-Boot] [PATCH 11/39] x86: Invalidate TLB as early as possible   Bin Meng
• [U-Boot] [drivers/mtd/ubi/eba.c:1275]: (error) Uninitialized variable: aeb   Heiko Schocher
• [U-Boot] [PATCH v5 2/2] Odroid-XU3: Add support for Odroid-XU3   Minkyu Kang
• [U-Boot] [PATCH] deepsleep/qe: add qe deepsleep support   Zhao Qiang
• [U-Boot] [PATCH] mpc85xx/p1022ds: convert to generic board   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH] powerpc/p1023rdb: Enable configs to use generic board code   Chunhe Lan
• [U-Boot] socfpga: mainline cannot boot linux   Marek Vasut
• [U-Boot] [PATCH] socfpga_cyclone5.h: fix kernel console argument in default environment   Marek Vasut
• [U-Boot] [PATCH] powerpc/c29xpcie: Enable configs to use generic board code   Chunhe Lan
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Marek Vasut
• [U-Boot] [PATCH v2 1/2] exynos: Enable config_distro_defaults.h   Guillaume Gardet
• [U-Boot] [PATCH v2 1/2] exynos: Enable config_distro_defaults.h   Ian Campbell
• [U-Boot] [PATCH v3 1/3] usb:ehci-mx6 add board_usb_phy_mode function   Marek Vasut
• [U-Boot] [PATCH v3 3/3] imx:mx6slevk add board level support for usb   Marek Vasut
• [U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function   Marek Vasut
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Lukasz Majewski
• [U-Boot] [PATCH 1/3] powerpc: add deep sleep support for generic board   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH] powerpc/t104xrdb: add deep sleep support   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH 3/3] powerpc/t102xrdb: add deep sleep support   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH 4/5] usb: s3c-otg: Allow custom gusbcfg   Lukasz Majewski
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Marek Vasut
• [U-Boot] [PATCH 4/5] usb: s3c-otg: Allow custom gusbcfg   Marek Vasut
• [U-Boot] [PATCH] usb_storage: skip all unknown devices when probing   Soeren Moch
• [U-Boot] [PATCH] usb_storage: skip all unknown devices when probing   Marek Vasut
• [U-Boot] [PATCH] ARM: UniPhier: add EHCI host pin settings for PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH] usb: include <asm/cache.h> and <part.h> from include/usb.h   Masahiro Yamada
• [U-Boot] [PATCH 12/39] x86: Tidy up global descriptor table setup   Bin Meng
• [U-Boot] [PATCH 13/39] x86: Use the standard dram_init() function   Bin Meng
• [U-Boot] [PATCH 0/4] EHCI support for Panasonic UniPhier SoCs   Masahiro Yamada
• [U-Boot] [PATCH 1/4] usb: add basic USB configs in Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 2/4] ARM: UniPhier: add MIO register file   Masahiro Yamada
• [U-Boot] [PATCH 3/4] usb: UniPhier: add UniPhier on-chip EHCI host driver support   Masahiro Yamada
• [U-Boot] [PATCH 4/4] ARM: UniPhier: enable USB features   Masahiro Yamada
• [U-Boot] [PATCH 14/39] x86: Use the standard arch_cpu_init() function   Bin Meng
• [U-Boot] [PATCH 15/39] x86: Remove unnecessary find_fdt() function   Bin Meng
• [U-Boot] [PATCH 16/39] x86: Fix up some missing prototypes   Bin Meng
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Lukasz Majewski
• [U-Boot] [PATCH 17/39] x86: Add chromebook_link board   Bin Meng
• [U-Boot] [PATCH 18/39] x86: Save the BIST value on reset   Bin Meng
• [U-Boot] [PATCH 4/5] usb: s3c-otg: Allow custom gusbcfg   Lukasz Majewski
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Marek Vasut
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Lukasz Majewski
• [U-Boot] [PATCH 0/4] EHCI support for Panasonic UniPhier SoCs   Marek Vasut
• [U-Boot] [PATCH] usb: include <asm/cache.h> and <part.h> from include/usb.h   Marek Vasut
• [U-Boot] [PATCH v2] arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target   Stefan Roese
• [U-Boot] [PATCH v3 1/3] usb:ehci-mx6 add board_usb_phy_mode function   Peng Fan
• [U-Boot] [PATCH v3 3/3] imx:mx6slevk add board level support for usb   Peng Fan
• [U-Boot] [PATCH 0/4] EHCI support for Panasonic UniPhier SoCs   Masahiro Yamada
• [U-Boot] [PATCH v3 1/3] usb:ehci-mx6 add board_usb_phy_mode function   Marek Vasut
• [U-Boot] [PATCH v3 3/3] imx:mx6slevk add board level support for usb   Marek Vasut
• [U-Boot] [PATCH 0/4] EHCI support for Panasonic UniPhier SoCs   Marek Vasut
• [U-Boot] [PATCH 0/4 v4] arm: socfpga: Add Cadence QSPI support   Stefan Roese
• [U-Boot] [PATCH 1/4 v4] spi: Add Cadence QSPI DM driver used by SoCFPGA   Stefan Roese
• [U-Boot] [PATCH 2/4 v4] arm: socfpga: dts: Add Cadence QSPI DT node to socfpga.dtsi   Stefan Roese
• [U-Boot] [PATCH 3/4 v4] arm: socfpga: dts: Add spi0 alias for Cadence QSPI driver   Stefan Roese
• [U-Boot] [PATCH 4/4 v4] arm: socfpga: Add Cadence QSPI support to config header   Stefan Roese
• [U-Boot] [PATCH v3 1/3] usb:ehci-mx6 add board_usb_phy_mode function   Peng Fan
• [U-Boot] [PATCH v3 3/3] imx:mx6slevk add board level support for usb   Peng Fan
• [U-Boot] [PATCH 0/2] Utilize low-level debug for UniPhier platform   Masahiro Yamada
• [U-Boot] [PATCH 1/2] ARM: UniPhier: add set_pinsel macro for use in assembly code   Masahiro Yamada
• [U-Boot] [PATCH 2/2] ARM: UniPhier: add UART initialization routine for low-level debug   Masahiro Yamada
• [U-Boot] [PATCH v3 1/3] usb:ehci-mx6 add board_usb_phy_mode function   Marek Vasut
• [U-Boot] [PATCH] powerpc: remove orphaned boards mcc200 and prs200   Nikita Kiryanov
• [U-Boot] [PATCH 0/6] arm: socfpga: Add Designware SPI support   Stefan Roese
• [U-Boot] [PATCH 1/6] arm: socfpga: Add DW master SPI clock to clock_manager.c   Stefan Roese
• [U-Boot] [PATCH 2/6] arm: socfpga: Add socfpga_spim_enable() to reset_manager.c   Stefan Roese
• [U-Boot] [PATCH 3/6] spi: Add designware master SPI DM driver used on SoCFPGA   Stefan Roese
• [U-Boot] [PATCH 4/6] arm: socfpga: dts: Add spi0/1 dts nodes for the Designware master SPI devices   Stefan Roese
• [U-Boot] [PATCH 5/6] arm: socfpga: dts: socrates: Add spi1/2 aliases needed DM SPI probing   Stefan Roese
• [U-Boot] [PATCH 6/6] arm: socfpga: Add Designware (DW) SPI support to config header   Stefan Roese
• [U-Boot] loadb problem. Hangs on START_CHAR   bomellberg
• [U-Boot] [PATCH v1 6/6] mpc83xx: Add gdsys hrcon board   Dirk Eibach
• [U-Boot] [PATCH v1 0/6] Update gdsys board support   Dirk Eibach
• [U-Boot] [PATCH v2] test: ums: Add sleep before unmount directory   Lukasz Majewski
• [U-Boot] [PATCH] ext4: goni: Modify dfu_alt_info's file names to have absolute path   Robert Baldyga
• [U-Boot] [PATCH v3] arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target   Stefan Roese
• [U-Boot] [PATCH 20/39] x86: Emit post codes in startup code   Bin Meng
• [U-Boot] [PATCH 21/39] x86: chromebook_link: Implement CAR support (cache as RAM)   Bin Meng
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Lukasz Majewski
• [U-Boot] [PATCH 4/5] usb: s3c-otg: Allow custom gusbcfg   Lukasz Majewski
• [U-Boot] [PATCH 5/5] arm: socfpga: Add example UDC config   Lukasz Majewski
• [U-Boot] [PATCH 20/39] x86: Emit post codes in startup code   Simon Glass
• [U-Boot] [PATCH 21/39] x86: chromebook_link: Implement CAR support (cache as RAM)   Simon Glass
• [U-Boot] [PATCH 5/5] arm: socfpga: Add example UDC config   Marek Vasut
• [U-Boot] [PATCH v3] arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target   Marek Vasut
• [U-Boot] [PATCH 1/4 v4] spi: Add Cadence QSPI DM driver used by SoCFPGA   Marek Vasut
• [U-Boot] [PATCH 06/39] x86: config: Move common x86 configs to a common file   Bin Meng
• [U-Boot] [PATCH 3/4 v4] arm: socfpga: dts: Add spi0 alias for Cadence QSPI driver   Marek Vasut
• [U-Boot] [PATCH 1/6] arm: socfpga: Add DW master SPI clock to clock_manager.c   Marek Vasut
• [U-Boot] [PATCH 3/6] spi: Add designware master SPI DM driver used on SoCFPGA   Marek Vasut
• [U-Boot] [PATCH 1/4 v4] spi: Add Cadence QSPI DM driver used by SoCFPGA   Stefan Roese
• [U-Boot] [PATCH 5/5] arm: socfpga: Add example UDC config   Lukasz Majewski
• [U-Boot] [PATCH v2] test: ums: Add sleep before unmount directory   Marek Vasut
• [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out PHY control   Marek Vasut
• [U-Boot] [PATCH 4/5] usb: s3c-otg: Allow custom gusbcfg   Marek Vasut
• [U-Boot] [PATCH 5/5] arm: socfpga: Add example UDC config   Marek Vasut
• [U-Boot] [PATCH v2] test: ums: Add sleep before unmount directory   Stephen Warren
• [U-Boot] [PATCH 5/5] arm: socfpga: Add example UDC config   Marek Vasut
• [U-Boot] [PATCH V4 1/3] usb: eth: fix Makefile   Rene Griessl
• [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER   Rene Griessl
• [U-Boot] [PATCH V4 3/3] usb: eth: enable AX88179 DRIVER for ARNDALE 5250   Rene Griessl
• [U-Boot] [PATCH v1 0/6] Update gdsys board support   Kim Phillips
• [U-Boot] [PATCH 17/39] x86: Add chromebook_link board   Simon Glass
• [U-Boot] uboot uImage binary does not boot in Qemu   Andreas Färber
• [U-Boot] verified boot of beaglebone black   Simon Glass
• [U-Boot] [PATCH v2] test: ums: Add sleep before unmount directory   Lukasz Majewski
• [U-Boot] [PATCH 06/39] x86: config: Move common x86 configs to a common file   Simon Glass
• [U-Boot] [PATCH] exynos: dts: Correct USB vbus-gpio numbering for Snow   Simon Glass
• [U-Boot] verifying & signing   Simon Glass
• [U-Boot] [PATCH 2/4 v4] arm: socfpga: dts: Add Cadence QSPI DT node to socfpga.dtsi   Simon Glass
• [U-Boot] [PATCH 2/4 v4] arm: socfpga: dts: Add Cadence QSPI DT node to socfpga.dtsi   Stefan Roese
• [U-Boot] verifying & signing   srinivasan
• [U-Boot] [PATCH 1/4 v4] spi: Add Cadence QSPI DM driver used by SoCFPGA   Simon Glass
• [U-Boot] [PATCH 3/6] spi: Add designware master SPI DM driver used on SoCFPGA   Simon Glass
• [U-Boot] [PATCH 3/4 v4] arm: socfpga: dts: Add spi0 alias for Cadence QSPI driver   Simon Glass
• [U-Boot] [PATCH v3 0/11] sun6i: Add dram init and SPL support   Hans de Goede
• [U-Boot] [PATCH v3 01/11] sun6i: Add new p2wi controller driver   Hans de Goede
• [U-Boot] [PATCH v3 02/11] sun6i: Add basic axp221 driver   Hans de Goede
• [U-Boot] [PATCH v3 03/11] sun6i: Add clock functions needed for SPL / DRAM init   Hans de Goede
• [U-Boot] [PATCH v3 04/11] sun6i: Add cpucfg register definitions   Hans de Goede
• [U-Boot] [PATCH v3 05/11] sun4i: Rename dram files to dram_sun4i.x   Hans de Goede
• [U-Boot] [PATCH v3 06/11] sun6i: Add dram initialization code   Hans de Goede
• [U-Boot] [PATCH v3 07/11] sun6i: Poke magic sram controller register to avoid cache issues   Hans de Goede
• [U-Boot] [PATCH v3 08/11] sun6i: Enable SPL   Hans de Goede
• [U-Boot] [PATCH v3 09/11] sun6i: Add Mele M9 board   Hans de Goede
• [U-Boot] [PATCH v3 10/11] sunxi: ehci: Add proper Kconfig options to select the usb Vbus gpio-s   Hans de Goede
• [U-Boot] [PATCH v3 11/11] sun6i: ehci: Add sun6i ehci support   Hans de Goede
• [U-Boot] [PATCH 1/4 v4] spi: Add Cadence QSPI DM driver used by SoCFPGA   Dinh Nguyen
• [U-Boot] [PATCH] driver/ddr/fsl: Adjust timing_cfg_0 to better support two DDR slots   York Sun
• [U-Boot] mpc85xx: inhibit bman portals by default   Jeffrey Ladouceur
• [U-Boot] [PATCH v2] test: ums: Add sleep before unmount directory   Marek Vasut
• [U-Boot] [PATCH V4 1/3] usb: eth: fix Makefile   Marek Vasut
• [U-Boot] [PATCH v2] test: ums: Add sleep before unmount directory   Wolfgang Denk
• [U-Boot] [PATCH v2] test: ums: Add sleep before unmount directory   Stephen Warren
• [U-Boot] [PATCH 0/8] *** iMX6 SabreSD SPL Support ***   John Tobias
• [U-Boot] [PATCH 1/8] kconfig: add SUPPORT_SPL   John Tobias
• [U-Boot] [PATCH 2/8] imx: add file in makefile   John Tobias
• [U-Boot] [PATCH 3/8] imx6: add spl on board configuration   John Tobias
• [U-Boot] [PATCH 4/8] imx6: add flexibility for defining stack address   John Tobias
• [U-Boot] [PATCH 5/8] mmc: imx: add spl_board_mmc_init   John Tobias
• [U-Boot] [PATCH 6/8] mx6: add SPL support in the header   John Tobias
• [U-Boot] [PATCH 7/8] imx: add configuration file for SPL   John Tobias
• [U-Boot] [PATCH 8/8] imx: SPL support for iMX6 SabreSD   John Tobias
• [U-Boot] [PATCH v2] test: ums: Add sleep before unmount directory   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] broadcom: add seven boards   Steve Rae
• [U-Boot] [PATCH v3 1/3] usb:ehci-mx6 add board_usb_phy_mode function   Peng Fan
• [U-Boot] [PATCH v3 1/3] usb:ehci-mx6 add board_usb_phy_mode function   Peng Fan
• [U-Boot] [PATCH] usb_storage: blacklist Enclosure Service Devices   Soeren Moch
• [U-Boot] [PATCH] usb_storage: blacklist Enclosure Service Devices   Nikolay Dimitrov
• [U-Boot] [PATCH 1/8] ARM: PSCI: Update psci.h for psci v0.2   Albert ARIBAUD
• [U-Boot] [PATCH 1/8] ARM: PSCI: Update psci.h for psci v0.2 -- CORRECTION   Albert ARIBAUD
• [U-Boot] [PATCH] broadcom: add seven boards   Albert ARIBAUD
• [U-Boot] [PATCH v2 32/40] ARM: cache_v7: Various minor cleanups   Albert ARIBAUD
• [U-Boot] [PATCH v2 33/40] ARM: cache-cp15: Use more accurate types   Albert ARIBAUD
• [U-Boot] [PATCH v2 34/40] malloc: Output region when debugging   Albert ARIBAUD
• [U-Boot] [PATCH v3 01/11] sun6i: Add new p2wi controller driver   Ian Campbell
• [U-Boot] [PATCH v3 02/11] sun6i: Add basic axp221 driver   Ian Campbell
• [U-Boot] [PATCH v3 03/11] sun6i: Add clock functions needed for SPL / DRAM init   Ian Campbell
• [U-Boot] [PATCH v3 04/11] sun6i: Add cpucfg register definitions   Ian Campbell
• [U-Boot] [PATCH v3 05/11] sun4i: Rename dram files to dram_sun4i.x   Ian Campbell
• [U-Boot] [PATCH v3 01/11] sun6i: Add new p2wi controller driver   Hans de Goede
• [U-Boot] [PATCH v3 06/11] sun6i: Add dram initialization code   Ian Campbell
• [U-Boot] [PATCH v3 07/11] sun6i: Poke magic sram controller register to avoid cache issues   Ian Campbell
• [U-Boot] [PATCH v3 08/11] sun6i: Enable SPL   Ian Campbell
• [U-Boot] [PATCH v3 09/11] sun6i: Add Mele M9 board   Ian Campbell
• [U-Boot] [PATCH v3 10/11] sunxi: ehci: Add proper Kconfig options to select the usb Vbus gpio-s   Ian Campbell
• [U-Boot] [PATCH v3 11/11] sun6i: ehci: Add sun6i ehci support   Ian Campbell
• [U-Boot] [PATCH v3 06/11] sun6i: Add dram initialization code   Hans de Goede
• [U-Boot] [PATCH] usb_storage: blacklist Enclosure Service Devices   Marek Vasut
• [U-Boot] [PATCH V4 2/3] usb: eth: add ASIX AX88179 DRIVER   Marek Vasut
• [U-Boot] [PATCH v3 1/3] usb:ehci-mx6 add board_usb_phy_mode function   Marek Vasut
• [U-Boot] [PATCH 1/4 v4] spi: Add Cadence QSPI DM driver used by SoCFPGA   Stefan Roese
• [U-Boot] [PATCH] usb_storage: blacklist Enclosure Service Devices   Soeren Moch
• [U-Boot] [PATCH 1/8] kconfig: add SUPPORT_SPL   Otavio Salvador
• [U-Boot] [PATCH 8/8] imx: SPL support for iMX6 SabreSD   Otavio Salvador
• [U-Boot] [PATCH 1/4] x86: Display more detailed CPU information on boot   Bin Meng
• [U-Boot] [PATCH 1/4] x86: Display more detailed CPU information on boot   Bin Meng
• [U-Boot] [U-Boot,v2] mpc85xx: inhibit bman portals by default   Jeffrey Ladouceur
• [U-Boot] [PATCH 8/8] imx: SPL support for iMX6 SabreSD   John Tobias
• [U-Boot] [PATCH v2 0/8] *** iMX6 SabreSD SPL Support ***   John Tobias
• [U-Boot] [PATCH v2 1/8] mmc: add spl_board_mmc_init   John Tobias
• [U-Boot] [PATCH v2 2/8] mmc: imx6: call spl_board_mmc_init   John Tobias
• [U-Boot] [PATCH v2 3/8] imx6: add spl on board configuration   John Tobias
• [U-Boot] [PATCH v2 4/8] imx6: add some flexibility for defining macros   John Tobias
• [U-Boot] [PATCH v2 5/8] imx6: add spl on board configuration   John Tobias
• [U-Boot] [PATCH v2 6/8] imx6: SPL support for iMX6 SabreSD   John Tobias
• [U-Boot] [PATCH v2 7/8] imx6: add data configuration file for SPL   John Tobias
• [U-Boot] [PATCH v2 8/8] kconfig: imx6: add SUPPORT_SPL   John Tobias
• [U-Boot] [PATCH 1/4] x86: Display more detailed CPU information on boot   Simon Glass
• [U-Boot] [PATCH 01/10] x86: Move paging functions into cpu.c   Simon Glass
• [U-Boot] [PATCH 02/10] x86: Bring in msr-index.h from linux 3.8   Simon Glass
• [U-Boot] [PATCH 03/10] x86: Display basic CPU information on boot   Simon Glass
• [U-Boot] [PATCH 04/10] x86: Add support for starting 64-bit kernel   Simon Glass
• [U-Boot] [PATCH 05/10] x86: Move kernel boot function to arch/x86/lib/bootm.c   Simon Glass
• [U-Boot] [PATCH 06/10] x86: image: Add new image type for x64_64   Simon Glass
• [U-Boot] [PATCH 07/10] x86: bootm: Support booting a 64-bit raw kernel   Simon Glass
• [U-Boot] [PATCH 08/10] x86: Correct a few progress message nits   Simon Glass
• [U-Boot] [PATCH 10/10] x86: config: Increase CONFIG_SYS_BOOTM_LEN to 16MB   Simon Glass
• [U-Boot] [PATCH 08/39] x86: Remove REALMODE_BASE which is no longer used   Simon Glass
• [U-Boot] [PATCH 09/39] x86: Remove board_init16() call which is not used   Simon Glass
• [U-Boot] [PATCH 11/39] x86: Invalidate TLB as early as possible   Simon Glass
• [U-Boot] [PATCH 12/39] x86: Tidy up global descriptor table setup   Simon Glass
• [U-Boot] [PATCH 13/39] x86: Use the standard dram_init() function   Simon Glass
• [U-Boot] [PATCH 14/39] x86: Use the standard arch_cpu_init() function   Simon Glass
• [U-Boot] [PATCH 16/39] x86: Fix up some missing prototypes   Simon Glass
• [U-Boot] [PATCH 18/39] x86: Save the BIST value on reset   Simon Glass
• [U-Boot] [PATCH v4 0/3] mmc: Board-specific MMC power initializations   Paul Kocialkowski
• [U-Boot] [PATCH v4 1/3] mmc: Board-specific MMC power initializations   Paul Kocialkowski
• [U-Boot] [PATCH v4 2/3] twl4030: device-index-specific MMC power initializations, common ramp-up delay   Paul Kocialkowski
• [U-Boot] [PATCH v4 3/3] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Paul Kocialkowski
• [U-Boot] [PATCH v2 6/8] imx6: SPL support for iMX6 SabreSD   Jeroen Hofstee
• [U-Boot] [PATCH v3 0/8] *** iMX6 SabreSD SPL Support ***   John Tobias
• [U-Boot] [PATCH v3 1/8] mmc: add spl_board_mmc_init   John Tobias
• [U-Boot] [PATCH v3 2/8] mmc: imx6: call spl_board_mmc_init   John Tobias
• [U-Boot] [PATCH v3 3/8] imx6: add spl on include header file   John Tobias
• [U-Boot] [PATCH v3 4/8] imx6: add some flexibility for defining macros   John Tobias
• [U-Boot] [PATCH v3 5/8] imx6: add spl on board configuration   John Tobias
• [U-Boot] [PATCH v3 6/8] imx6: add data configuration file for SPL   John Tobias
• [U-Boot] [PATCH v3 7/8] imx6: SPL support for iMX6 SabreSD   John Tobias
• [U-Boot] [PATCH v3 8/8] kconfig: imx6: add SUPPORT_SPL   John Tobias
• [U-Boot] [PATCH v4 3/3] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Paul Kocialkowski
• [U-Boot] [PATCH 0/2] spl: MMC U-Boot image load from raw partition   Paul Kocialkowski
• [U-Boot] [PATCH 1/2] MMC SD fs boot partition config coding style and proper description   Paul Kocialkowski
• [U-Boot] [PATCH 2/2] spl: MMC U-Boot image load from raw partition   Paul Kocialkowski
• [U-Boot] [PATCH v2 6/8] imx6: SPL support for iMX6 SabreSD   John Tobias
• [U-Boot] [PATCH 0/2] spl: MMC U-Boot image load from raw partition   Albert ARIBAUD
• [U-Boot] [PATCH 0/2] spl: MMC U-Boot image load from raw partition   Paul Kocialkowski
• [U-Boot] [PATCH 0/2] spl: MMC U-Boot image load from raw partition   Albert ARIBAUD
• [U-Boot] [PATCH v3 0/3] exynos config updates   Ian Campbell
• [U-Boot] [PATCH v3 1/3] exynos: Enable config_distro_defaults.h   Ian Campbell
• [U-Boot] [PATCH v3 2/3] exynos5: Use config_distro_bootcmd.h   Ian Campbell
• [U-Boot] [PATCH v3 3/3] exynos: Increase command line buffer size (CONFIG_SYS_CBSIZE)   Ian Campbell
• [U-Boot] [PATCH v2 1/4] x86: Do CPU identification in the early phase   Bin Meng
• [U-Boot] [PATCH v2 2/4] x86: Do TSC MSR calibration only for known/supported CPUs   Bin Meng
• [U-Boot] [PATCH v2 3/4] x86: Add quick TSC calibration via PIT   Bin Meng
• [U-Boot] [PATCH v2 4/4] x86: Save TSC frequency in the global data   Bin Meng
• [U-Boot] [PATCH 0/7] *** iMX6SL-evk SPL Support ***   John Tobias
• [U-Boot] [PATCH 1/7] imx6: add macro define inclusion   John Tobias
• [U-Boot] [PATCH 2/7] imx6sl: update DCD configuration file   John Tobias
• [U-Boot] [PATCH 3/7] imx6sl: add spl on board configuration   John Tobias
• [U-Boot] [PATCH 4/7] imx6: add additional flexibility for defining macros   John Tobias
• [U-Boot] [PATCH 5/7] imx6sl: add spl in include header file   John Tobias
• [U-Boot] [PATCH 6/7] imx6sl: add SPL support for iMX6SL-evk   John Tobias
• [U-Boot] [PATCH 7/7] kconfig: imx6sl: add add SUPPORT_SPL   John Tobias
• [U-Boot] [PATCH v3 7/8] imx6: SPL support for iMX6 SabreSD   Stefano Babic
• [U-Boot] [PATCH v3 6/8] imx6: add data configuration file for SPL   Stefano Babic
• [U-Boot] [PATCH v3 4/8] imx6: add some flexibility for defining macros   Stefano Babic
• [U-Boot] [PATCH 2/7] imx6sl: update DCD configuration file   Stefano Babic
• [U-Boot] [PATCH 0/7] *** iMX6SL-evk SPL Support ***   Andreas Färber
• [U-Boot] [PATCH 0/7] *** iMX6SL-evk SPL Support ***   John Tobias
• [U-Boot] [PATCH 1/7] imx6: add macro define inclusion   Fabio Estevam
• [U-Boot] [PATCH 1/7] imx6: add macro define inclusion   John Tobias
• [U-Boot] verified boot of beaglebone black   Srinivasan S
• [U-Boot] [PATCH 7/9] board/renesas/ecovec/ecovec.c: fix buffer overflow   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v3 4/8] imx6: add some flexibility for defining macros   John Tobias
• [U-Boot] [PATCH v3 6/8] imx6: add data configuration file for SPL   John Tobias
• [U-Boot] [PATCH v2 3/8] imx6: add spl on board configuration   Fabio Estevam
• [U-Boot] verified boot of beaglebone black   Srinivasan S
• [U-Boot] [PATCH 1/3] arm: rmobile: alt: Enable channel 1 of sh-i2c   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/3] arm: rmobile: alt: Fix typo in comment for sh-i2c   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/3] arm: rmobile: alt: Remove i2c_init function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v3 7/8] imx6: SPL support for iMX6 SabreSD   John Tobias
• [U-Boot] [PATCH] arm: rmobile: kconfig: Remove '+S:' prefix from defconfig files   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] arm: rmobile: alt: Change clock of SCIF to external clock   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 3/8] imx6: add spl on board configuration   John Tobias
• [U-Boot] [PATCH v2 3/8] imx6: add spl on board configuration   Fabio Estevam
• [U-Boot] [PATCH 2/7] imx6sl: update DCD configuration file   John Tobias
• [U-Boot] [PATCH v2 3/8] imx6: add spl on board configuration   John Tobias
• [U-Boot] [PATCH v4 0/3] Add board level usb support for mxsxsabresd and mx6slevk   Peng Fan
• [U-Boot] [PATCH v4 1/3] usb:ehci-mx6 add phy mode query function   Peng Fan
• [U-Boot] [PATCH v4 2/3] imx:mx6sxsabresd add board level support for usb   Peng Fan
• [U-Boot] [PATCH 3/3] imx:mx6slevk add board level support for usb   Peng Fan
• [U-Boot] [PATCH v3 1/3] usb:ehci-mx6 add board_usb_phy_mode function   Peng Fan
• [U-Boot] [PATCH v6 0/3] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
• [U-Boot] [PATCH v6 1/3] exynos5: fix GPIO information of exynos5420   Hyungwon Hwang
• [U-Boot] [PATCH v6 2/3] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH v6 3/3] Odroid-XU3: Add documentation for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH 31/39] x86: ivybridge: Check BIST value on boot   Bin Meng
• [U-Boot] [PATCH 32/39] x86: ivybridge: Perform Intel microcode update on boot   Bin Meng
• [U-Boot] [PATCH 33/39] RFC: x86: dts: Add microcode updates for ivybridge CPU   Bin Meng
• [U-Boot] Pull request: u-boot-blackfin   Sonic Zhang
• [U-Boot] [PATCH 39/39] x86: ivybridge: Implement SDRAM init   Bin Meng
• [U-Boot] [PATCH] arm: rmobile: alt: Change clock of SCIF to external clock   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Heiko Schocher
• [U-Boot] [RFC PATCH 03/12] dm: i2c: Add a uclass for I2C   Heiko Schocher
• [U-Boot] [PATCH 19/39] x86: Build a .rom file which can be flashed to an x86 machine   Bin Meng
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Jagan Teki
• [U-Boot] [PATCH 39/39] x86: ivybridge: Implement SDRAM init   Bin Meng
• [U-Boot] [RFC PATCH 04/12] dm: i2c: Implement driver model support in the i2c command   Heiko Schocher
• [U-Boot] [RFC PATCH 0/12] RFC: dm: Add I2C support   Heiko Schocher
• [U-Boot] [PATCH v4 0/3] ARM: atmel: add sama5d4ek board support   Bo Shen
• [U-Boot] [PATCH v4 1/3] mtd: atmel_nand: runtime to build gf table for pmecc   Bo Shen
• [U-Boot] [PATCH v4 2/3] net: macb: enable GMAC IP without GE feature support   Bo Shen
• [U-Boot] [PATCH v4 3/3] ARM: atmel: add sama5d4ek board support   Bo Shen
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Heiko Schocher
• [U-Boot] [i2c] Pull request   Heiko Schocher
• [U-Boot] [PATCH v2] ARM: atmel: add sama5d4 xplained ultra board support   Bo Shen
• [U-Boot] [PATCH 1/2] imx: mx6q/dl sabre_common: Move MMC ENV offset to 512KB position   Ye.Li
• [U-Boot] [PATCH 2/2] imx: mx6q/dlsabreauto: And NAND flash support   Ye.Li
• [U-Boot] [PATCH] powerpc: remove orphaned boards mcc200 and prs200   Masahiro Yamada
• [U-Boot] [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY   Shengzhou Liu
• [U-Boot] [PATCH 2/4 v4] arm: socfpga: dts: Add Cadence QSPI DT node to socfpga.dtsi   Pavel Machek
• [U-Boot] [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY   Shengzhou.Liu at freescale.com
• [U-Boot] [PATCH 2/2] imx: mx6q/dlsabreauto: And NAND flash support   Fabio Estevam
• [U-Boot] loadb problem. Hangs on START_CHAR   bomellberg
• [U-Boot] [PATCH] mx28evk: README: Revision C is also supported   Fabio Estevam
• [U-Boot] ARM: PSCI 0.1 vs 0.2   Jan Kiszka
• [U-Boot] loadb problem. Hangs on START_CHAR   Wolfgang Denk
• [U-Boot] loadb problem. Hangs on START_CHAR   bomellberg
• [U-Boot] ARM: flush_dcache_all for PSCI   Jan Kiszka
• [U-Boot] ARM: PSCI 0.1 vs 0.2   Marc Zyngier
• [U-Boot] ARM: flush_dcache_all for PSCI   Marc Zyngier
• [U-Boot] [PATCH v4] sun6i: Add basic axp221 driver   Hans de Goede
• [U-Boot] [PATCH v4] sun6i: Add basic axp221 driver   Ian Campbell
• [U-Boot] ARM: PSCI 0.1 vs 0.2   Jan Kiszka
• [U-Boot] ARM: PSCI 0.1 vs 0.2   bhupesh.sharma at freescale.com
• [U-Boot] [PATCH v4] sun6i: Add basic axp221 driver   Hans de Goede
• [U-Boot] [PATCH 3/3] ot1200: rework card detect for eMMC   Christian Gmeiner
• [U-Boot] [PATCH 3/3] ot1200: rework card detect for eMMC   Christian Gmeiner
• [U-Boot] ARM: PSCI 0.1 vs 0.2   Jan Kiszka
• [U-Boot] [PATCH] ot1200: add support for EHCI   Christian Gmeiner
• [U-Boot] ARM: PSCI 0.1 vs 0.2   Marc Zyngier
• [U-Boot] [PATCH v3] mpc85xx: inhibit bman portals by default   Jeffrey Ladouceur
• [U-Boot] [PATCH v4] sun6i: Add basic axp221 driver   Ian Campbell
• [U-Boot] [PATCH 1/2] imx: mx6q/dl sabre_common: Move MMC ENV offset to 512KB position   Fabio Estevam
• [U-Boot] [PATCH v4] sun6i: Add basic axp221 driver   Hans de Goede
• [U-Boot] porting u-boot, few final questions   DaveKucharczyk
• [U-Boot] porting u-boot, few final questions   Fabio Estevam
• [U-Boot] [PATCH v3 3/3] exynos: Increase command line buffer size (CONFIG_SYS_CBSIZE)   Simon Glass
• [U-Boot] porting u-boot, few final questions   Wolfgang Denk
• [U-Boot] [PATCH 2/4 v4] arm: socfpga: dts: Add Cadence QSPI DT node to socfpga.dtsi   Dinh Nguyen
• [U-Boot] [PATCH v3 3/3] exynos: Increase command line buffer size (CONFIG_SYS_CBSIZE)   Fabio Estevam
• [U-Boot] verified boot of beaglebone black   Simon Glass
• [U-Boot] porting u-boot, few final questions   Fabio Estevam
• [U-Boot] [PATCH] ARM: OMAP5: DRA7xx: Enable 8-bit eMMC access on the dra7xx_evm   Lubomir Popov
• [U-Boot] [PATCH] powerpc: remove orphaned boards mcc200 and prs200   Nikita Kiryanov
• [U-Boot] [PATCH] ARM: OMAP5: DRA7xx: Fix misleading comments in mux_data.h   Lubomir Popov
• [U-Boot] [PATCH] powerpc: remove orphaned boards mcc200 and prs200   Masahiro YAMADA
• [U-Boot] porting u-boot, few final questions   Nikolay Dimitrov
• [U-Boot] [PATCH v3 1/3] usb:ehci-mx6 add board_usb_phy_mode function   Marek Vasut
• [U-Boot] [PATCH] ARM: OMAP5: DRA7xx: Fix misleading comments in mux_data.h   Tom Rini
• [U-Boot] [PATCH] ARM: OMAP5: DRA7xx: Enable 8-bit eMMC access on the dra7xx_evm   Tom Rini
• [U-Boot] [PATCH 1/2] MMC SD fs boot partition config coding style and proper description   Tom Rini
• [U-Boot] [PATCH 0/2] spl: MMC U-Boot image load from raw partition   Tom Rini
• [U-Boot] [PATCH 2/2] spl: MMC U-Boot image load from raw partition   Tom Rini
• [U-Boot] [PATCH v4 1/3] mmc: Board-specific MMC power initializations   Tom Rini
• [U-Boot] [PATCH v4 2/3] twl4030: device-index-specific MMC power initializations, common ramp-up delay   Tom Rini
• [U-Boot] [PATCH v4 3/3] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Tom Rini
• [U-Boot] [PATCH v4 3/3] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Tom Rini
• [U-Boot] [PATCH] broadcom: add seven boards   Tom Rini
• [U-Boot] [PATCH 01/11] arm: omap5: don't enable misc_init_r by default   Tom Rini
• [U-Boot] [PATCH 02/11] arm: omap5: tps659038: rename regulator defines   Tom Rini
• [U-Boot] [PATCH 03/11] arm: dra7xx: prcm: add missing registers   Tom Rini
• [U-Boot] [PATCH 04/11] usb: phy: omap_usb_phy: fix build breakage   Tom Rini
• [U-Boot] [PATCH 05/11] arm: omap-common: emif: allow to map memory without interleaving   Tom Rini
• [U-Boot] [PATCH 06/11] configs: omap5_common : Boot rootfs from sd card by default   Tom Rini
• [U-Boot] [PATCH 07/11] arm: omap5: make hw_init_data weak   Tom Rini
• [U-Boot] [PATCH 08/11] arm: omap5: sdram: mark emif_get_ext_phy_ctrl_const_regs __weak   Tom Rini
• [U-Boot] [PATCH 09/11] arm: omap_common: expose tps659038 and dra7xx_dplls   Tom Rini
• [U-Boot] [PATCH 10/11] arm: omap: add support for am57xx devices   Tom Rini
• [U-Boot] [PATCH v2 11/11] beagle_x15: add board support for Beagle x15   Tom Rini
• [U-Boot] [PATCH v2 1/4] x86: Do CPU identification in the early phase   Simon Glass
• [U-Boot] [PATCH v2 2/4] x86: Do TSC MSR calibration only for known/supported CPUs   Simon Glass
• [U-Boot] [PATCH v2 3/4] x86: Add quick TSC calibration via PIT   Simon Glass
• [U-Boot] [PATCH v2 4/4] x86: Save TSC frequency in the global data   Simon Glass
• [U-Boot] [PATCH 14/39] x86: Use the standard arch_cpu_init() function   Simon Glass
• [U-Boot] Fix for ns16550 driver hanging on OMAP4   Gregoire Gentil
• [U-Boot] [PATCH] mx53loco: Change 'fdt_file' dynamically   Fabio Estevam
• [U-Boot] [PATCH v2 11/11] beagle_x15: add board support for Beagle x15   Felipe Balbi
• [U-Boot] [PATCH] mx53loco: Change 'fdt_file' dynamically   Otavio Salvador
• [U-Boot] [PATCH v3 11/11] beagle_x15: add board support for Beagle x15   Felipe Balbi
• [U-Boot] [PATCH v7 0/6] fs: fat/ext4/sandbox - Deal with files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v7 1/6] sandbox: Use md5sum and fatwrite to enable testing of fs commands   Suriyan Ramasami
• [U-Boot] [PATCH v7 2/6] fat: prepare for API change for files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v7 3/6] ext4: prepare for API change for files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v7 4/6] sandbox: prepare for API change for files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v7 5/6] fs: API changes to enable extra parameter to return size of type loff_t   Suriyan Ramasami
• [U-Boot] [PATCH v7 6/6] sandbox: script for testing sandbox/ext4/fat/fs commands   Suriyan Ramasami
• [U-Boot] porting u-boot, few final questions   DaveKucharczyk
• [U-Boot] image-fdt: boot_get_fdt() return value when no DTB exists   Tom Rini
• [U-Boot] power_spi.c: Rewrite pmic_reg function   Tom Rini
• [U-Boot] [U-Boot, 1/6] dlmalloc: ensure gd is set for early alloc   Tom Rini
• [U-Boot] [U-Boot,2/6] sandbox: init cli for -c   Tom Rini
• [U-Boot] [U-Boot, 3/6] hush: return consistent codes from run_command()   Tom Rini
• [U-Boot] [U-Boot,4/6] hush: fix segfault on syntax error   Tom Rini
• [U-Boot] [U-Boot, 5/6] hush: make run_command() return an error on parsing failure   Tom Rini
• [U-Boot] kbuild: remove "clobber" target   Tom Rini
• [U-Boot] [U-Boot, 1/6] kbuild: bug fixes and cleanups of Makefile.host   Tom Rini
• [U-Boot] [U-Boot, 2/6] kbuild: improve multi-objs dependency and cleanups   Tom Rini
• [U-Boot] [U-Boot, 3/6] kbuild: sync top Makefile with Linux 3.18-rc1   Tom Rini
• [U-Boot] [U-Boot, 4/6] kconfig: sync kconfig files with Linux 3.18-rc1   Tom Rini
• [U-Boot] [U-Boot, 5/6] kbuild: sync misc scripts with Linux 3.18-rc1   Tom Rini
• [U-Boot] MAINTAINERS: CFI flash maintainership only includes the CFI related files   Tom Rini
• [U-Boot] tools/env: Fix environment size and CRC on 64-bit hosts   Tom Rini
• [U-Boot] [U-Boot, v2] doc: fix documentation of out-of-tree build   Tom Rini
• [U-Boot] [U-Boot,1/9] cppcheck cleanup: fix nullPointer errors   Tom Rini
• [U-Boot] [U-Boot,2/9] board/cogent/lcd.c: fix syntax error   Tom Rini
• [U-Boot] [U-Boot,4/9] drivers/net/uli526x.c: fix syntax error   Tom Rini
• [U-Boot] [U-Boot, 5/9] common/cmd_fitupd.c: restore corrupted file   Tom Rini
• [U-Boot] [U-Boot, 6/9] board/matrix_vision/mvblx/sys_eeprom.c: fix buffer overflow   Tom Rini
• [U-Boot] [U-Boot, 8/9] ARM: MXS: fix Uninitialized variable error   Tom Rini
• [U-Boot] [U-Boot, 9/9] board/esd/common/auto_update.c: fix Uninitialized variable   Tom Rini
• [U-Boot] [U-Boot, v3] generic-board: make compile-time noise for non-generic boards   Tom Rini
• [U-Boot] [U-Boot, v1] ZFS: Clean up cppcheck warnings where relevant, leaked memory etc   Tom Rini
• [U-Boot] Added support for comments in input to mkenvimage.   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] Pull request: u-boot-blackfin   Tom Rini
• [U-Boot] [i2c] Pull request   Tom Rini
• [U-Boot] sort drivers/mmc/Makefile   Tom Rini
• [U-Boot] [U-Boot,10/10] net: smc911x: Keep MAC programmed   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] powerpc: o2dnt: convert to generic board   Tom Rini
• [U-Boot] [PATCH v3 11/11] beagle_x15: add board support for Beagle x15   Tom Rini
• [U-Boot] [ANN] U-Boot v2015.01-rc1 released   Tom Rini
• [U-Boot] [PATCH] Revert "ARM: SPL: do not set gd again"   Simon Glass
• [U-Boot] porting u-boot, few final questions   DaveKucharczyk
• [U-Boot] can i pass an bootarg/environment variable from the command line while building u-boot?   harsha kiran
• [U-Boot] [PATCH v3 0/14] dm: Implement driver model support in SPL   Simon Glass
• [U-Boot] [PATCH v3 01/14] arm: spl: Avoid setting up a duplicate global data structure   Simon Glass
• [U-Boot] [PATCH v3 02/14] dm: tegra: Avoid using arch-specific memcpy() in SPL   Simon Glass
• [U-Boot] [PATCH v3 03/14] dm: Split the simple malloc() implementation into its own file   Simon Glass
• [U-Boot] [PATCH v3 04/14] dm: arm: spl: Allow simple malloc() in SPL   Simon Glass
• [U-Boot] [PATCH v3 05/14] dm: spl: Make simple malloc() available when enabled   Simon Glass
• [U-Boot] [PATCH v3 06/14] dm: spl: Allow driver model to be used   Simon Glass
• [U-Boot] [PATCH v3 07/14] dm: Allow device removal features to be dropped   Simon Glass
• [U-Boot] [PATCH v3 08/14] dm: Allow stdio registration to be dropped   Simon Glass
• [U-Boot] [PATCH v3 09/14] dm: Disable dm_warn() in SPL   Simon Glass
• [U-Boot] [PATCH v3 10/14] dm: tegra: Add platform data for the SPL uart   Simon Glass
• [U-Boot] [PATCH v3 11/14] dm: tegra: Add platform data for the GPIO driver   Simon Glass
• [U-Boot] [PATCH v3 12/14] dm: arm: spl: Make driver model linker lists available   Simon Glass
• [U-Boot] [PATCH v3 13/14] dm: tegra: Enable driver model in SPL and adjust the GPIO driver   Simon Glass
• [U-Boot] [PATCH v3 14/14] dm: Update documentation to include CONFIG_DM... options   Simon Glass
• [U-Boot] [PATCH 31/39] x86: ivybridge: Check BIST value on boot   Simon Glass
• [U-Boot] [PATCH 32/39] x86: ivybridge: Perform Intel microcode update on boot   Simon Glass
• [U-Boot] [PATCH 33/39] RFC: x86: dts: Add microcode updates for ivybridge CPU   Simon Glass
• [U-Boot] [PATCH 19/39] x86: Build a .rom file which can be flashed to an x86 machine   Simon Glass
• [U-Boot] [PATCH 39/39] x86: ivybridge: Implement SDRAM init   Simon Glass
• [U-Boot] sandbox: Uninitialized variable   Simon Glass
• [U-Boot] [PATCH v2 0/33] x86: Add support for running on bare hardware   Simon Glass
• [U-Boot] [PATCH v2 01/33] Move early malloc() to before arch_cpu_init()   Simon Glass
• [U-Boot] [PATCH v2 02/33] fdt: Add a function to decode a variable-sized u32 array   Simon Glass
• [U-Boot] [PATCH v2 03/33] dm: serial: Move current serial port pointer to global_data   Simon Glass
• [U-Boot] [PATCH v2 04/33] dm: gpio: Add a function to read an ID from a list of GPIOs   Simon Glass
• [U-Boot] [PATCH v2 05/33] x86: Add ifdtool for working with Intel Flash Descriptor ROM images   Simon Glass
• [U-Boot] [PATCH v2 06/33] x86: config: Move common x86 configs to a common file   Simon Glass
• [U-Boot] [PATCH v2 07/33] x86: Add processor functions to halt and get stack pointer   Simon Glass
• [U-Boot] [PATCH v2 08/33] x86: Remove unnecessary find_fdt(), prepare_fdt() functions   Simon Glass
• [U-Boot] [PATCH v2 09/33] x86: Replace fill_processor_name() with cpu_get_name()   Simon Glass
• [U-Boot] [PATCH v2 10/33] x86: Tidy up timer code for Intel core architecture   Simon Glass
• [U-Boot] [PATCH v2 11/33] x86: Add chromebook_link board   Simon Glass
• [U-Boot] [PATCH v2 12/33] x86: Build a .rom file which can be flashed to an x86 machine   Simon Glass
• [U-Boot] [PATCH v2 13/33] x86: Emit post codes in startup code for Chromebooks   Simon Glass
• [U-Boot] [PATCH v2 14/33] x86: chromebook_link: Implement CAR support (cache as RAM)   Simon Glass
• [U-Boot] [PATCH v2 15/33] x86: Refactor PCI to permit alternate init   Simon Glass
• [U-Boot] [PATCH v2 16/33] x86: Support use of PCI before relocation   Simon Glass
• [U-Boot] [PATCH v2 17/33] x86: ivybridge: Enable PCI in early init   Simon Glass
• [U-Boot] [PATCH v2 18/33] x86: pci: Allow configuration before relocation   Simon Glass
• [U-Boot] [PATCH v2 19/33] x86: ivybridge: Add early LPC init so that serial works   Simon Glass
• [U-Boot] [PATCH v2 20/33] x86: Tidy up coreboot header usage   Simon Glass
• [U-Boot] [PATCH v2 21/33] x86: Add clr/setbits functions   Simon Glass
• [U-Boot] [PATCH v2 22/33] x86: Add msr read/write functions that use a structure   Simon Glass
• [U-Boot] [PATCH v2 23/33] x86: ivybridge: Perform initial CPU setup   Simon Glass
• [U-Boot] [PATCH v2 24/33] x86: ivybridge: Check BIST value on boot   Simon Glass
• [U-Boot] [PATCH v2 25/33] x86: ivybridge: Perform Intel microcode update on boot   Simon Glass
• [U-Boot] [PATCH v2 26/33] x86: dts: Add microcode updates for ivybridge CPU   Simon Glass
• [U-Boot] [PATCH v2 27/33] x86: ivybridge: Add early init for PCH devices   Simon Glass
• [U-Boot] [PATCH v2 28/33] x86: ivybridge: Add support for early GPIO init   Simon Glass
• [U-Boot] [PATCH v2 29/33] x86: chromebook_link: Enable GPIO support   Simon Glass
• [U-Boot] [PATCH v2 30/33] x86: Make show_boot_progress() common   Simon Glass
• [U-Boot] [PATCH v2 31/33] x86: ivybridge: Add LAPIC support   Simon Glass
• [U-Boot] [PATCH v2 32/33] x86: ivybridge: Implement SDRAM init   Simon Glass
• [U-Boot] [PATCH v2 33/33] x86: Rename chromebook-x86 to coreboot   Simon Glass
• [U-Boot] [PATCH] qe/deep-sleep: add qe deep-sleep for generic board   Zhao Qiang
• [U-Boot] [PATCH] qe/deep-sleep: add qe deep-sleep for generic board   Zhao Qiang
• [U-Boot] [PATCH] powerpc: remove orphaned boards mcc200 and prs200   Wolfgang Denk
• [U-Boot] [PATCH v2 1/4] x86: Do CPU identification in the early phase   Bin Meng
• [U-Boot] [PATCH v2 2/4] x86: Do TSC MSR calibration only for known/supported CPUs   Bin Meng
• [U-Boot] [PATCH v3 4/8] imx6: add some flexibility for defining macros   Stefano Babic
• [U-Boot] [PATCH 19/39] x86: Build a .rom file which can be flashed to an x86 machine   Bin Meng
• [U-Boot] [PATCH 39/39] x86: ivybridge: Implement SDRAM init   Bin Meng
• [U-Boot] Pull req on u-boot-sunxi/sunxi-wip   Hans de Goede
• [U-Boot] [PATCH v3 7/8] imx6: SPL support for iMX6 SabreSD   Stefano Babic
• [U-Boot] [PATCH v2 06/33] x86: config: Move common x86 configs to a common file   Bin Meng
• [U-Boot] AM335x Boot Device 6 (NAND?)   Stefan Roese
• [U-Boot] [PATCH v2 07/33] x86: Add processor functions to halt and get stack pointer   Bin Meng
• [U-Boot] [PATCH v2 08/33] x86: Remove unnecessary find_fdt(), prepare_fdt() functions   Bin Meng
• [U-Boot] [PATCH v2 09/33] x86: Replace fill_processor_name() with cpu_get_name()   Bin Meng
• [U-Boot] [PATCH v2 10/33] x86: Tidy up timer code for Intel core architecture   Bin Meng
• [U-Boot] [PATCH v4] zynq: Use GPLed files for SPL   Michal Simek
• [U-Boot] [GIT PULL] Zynq patches   Michal Simek
• [U-Boot] [PATCH v2 13/33] x86: Emit post codes in startup code for Chromebooks   Bin Meng
• [U-Boot] [PATCH] mmc: Cosmetic fix for nicer, aligned device list printout   Lubomir Popov
• [U-Boot] [ANN] U-Boot v2015.01-rc1 released   Masahiro Yamada
• [U-Boot] [PATCH] ot1200: fix card detect for usdhc4   Christian Gmeiner
• [U-Boot] [PATCH v4 3/3] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Paul Kocialkowski
• [U-Boot] AM335x Boot Device 6 (NAND?)   Tom Rini
• [U-Boot] [PATCH] fs: make it possible to read the filesystem UUID   Christian Gmeiner
• [U-Boot] [PATCH] fs: make it possible to read the filesystem UUID   Christian Gmeiner
• [U-Boot] [PATCH] fs: make it possible to read the filesystem UUID   Christian Gmeiner
• [U-Boot] [PATCH] sunxi: gmac: Update bananapi fixup to the new CONFIG_TARGET_<BOARD> structure   Zoltan HERPAI
• [U-Boot] [PATCH v4 3/3] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Tom Rini
• [U-Boot] [PATCH] ARM: UniPhier: decrease pre-reloc malloc area size   Masahiro Yamada
• [U-Boot] [PATCH v6 0/3] Adds support for Exynos5422 odroid xu3 board   Minkyu Kang
• [U-Boot] [PATCH v2] fs: make it possible to read the filesystem UUID   Christian Gmeiner
• [U-Boot] [PATCH 0/2] mtd: denali: Use SELF_INIT to fix up registers after nand_scan_ident()   Masahiro Yamada
• [U-Boot] [PATCH 1/2] mtd: denali: use CONFIG_SYS_NAND_SELF_INIT   Masahiro Yamada
• [U-Boot] [PATCH 2/2] mtd: denali: set some registers after nand_scan_ident()   Masahiro Yamada
• [U-Boot] [PATCH v2] mtd: nand: allow to skip BBT scanning during NAND inititialization   Masahiro Yamada
• [U-Boot] [PATCH v4 3/3] omap_hsmmc: Board-specific TWL4030 MMC power initializations   Paul Kocialkowski
• [U-Boot] [PATCH 0/2] ARM: UniPhier: some cleanups and bug fix   Masahiro Yamada
• [U-Boot] [PATCH 1/2] ARM: UniPhier: consolidate board_postclk_init() function   Masahiro Yamada
• [U-Boot] [PATCH 2/2] ARM: UniPhier: call pin_init() also in the normal boot   Masahiro Yamada
• [U-Boot] [PATCH V2] powerpc: remove orphaned boards mcc200 and prs200   Nikita Kiryanov
• [U-Boot] [PATCH] ot1200: fix card detect for usdhc4   Stefano Babic
• [U-Boot] [PATCH v2 15/33] x86: Refactor PCI to permit alternate init   Bin Meng
• [U-Boot] [PATCH v2 32/33] x86: ivybridge: Implement SDRAM init   Bin Meng
• [U-Boot] [PATCH] Revert "lib: bootm: add missing include"   Michal Simek
• [U-Boot] [PATCH 34/39] x86: ivybridge: Add early init for PCH devices   Bin Meng
• [U-Boot] [PATCH] arm: imx: make bmode command work with SPL/U-Boot combo   Nikita Kiryanov
• [U-Boot] [PATCH] serial: UniPhier: borrow macros from linux/serial_reg.h   Masahiro YAMADA
• [U-Boot] [PATCH] ARM: UniPhier: reset on-board devices on start-up   Masahiro YAMADA
• [U-Boot] [PATCH] ARM: UniPhier: move DDR related configuration to Kconfig   Masahiro YAMADA
• [U-Boot] [PATCH] ARM: UniPhier: add EHCI host pin settings for PH1-Pro4   Masahiro YAMADA
• [U-Boot] [PATCH 0/4] EHCI support for Panasonic UniPhier SoCs   Masahiro YAMADA
• [U-Boot] [PATCH 1/2] ARM: UniPhier: add set_pinsel macro for use in assembly code   Masahiro YAMADA
• [U-Boot] [PATCH] ARM: UniPhier: decrease pre-reloc malloc area size   Masahiro YAMADA
• [U-Boot] [PATCH 0/2] ARM: UniPhier: some cleanups and bug fix   Masahiro YAMADA
• [U-Boot] [RFC PATCH 0/12] RFC: dm: Add I2C support   Simon Glass
• [U-Boot] Pull request: u-boot-uniphier/master   Masahiro YAMADA
• [U-Boot] [PATCH] spl: Change debug to printf for "Unsupported boot-device"   Stefan Roese
• [U-Boot] [PATCH v2 2/4] x86: Do TSC MSR calibration only for known/supported CPUs   Simon Glass
• [U-Boot] [PATCH 19/39] x86: Build a .rom file which can be flashed to an x86 machine   Simon Glass
• [U-Boot] [PATCH v2 10/33] x86: Tidy up timer code for Intel core architecture   Simon Glass
• [U-Boot] [PATCH 34/39] x86: ivybridge: Add early init for PCH devices   Simon Glass
• [U-Boot] [PATCH] spl: Change debug to printf for "Unsupported boot-device"   Tom Rini
• [U-Boot] [PATCH v2 32/33] x86: ivybridge: Implement SDRAM init   Simon Glass
• [U-Boot] [PATCH] spl: Change debug to printf for "Unsupported boot-device"   Stefan Roese
• [U-Boot] [PATCH v1 0/2] Fix SoC-specific exception handling   Albert ARIBAUD
• [U-Boot] [PATCH v1 1/2] cosmetic: arm: fix whitespace in arch/arm/lib/relocate.S   Albert ARIBAUD
• [U-Boot] [PATCH v1 2/2] imx: fix exception vectors relocation in i.MX27   Albert ARIBAUD
• [U-Boot] [PATCH v2] fs: make it possible to read the filesystem UUID   Stephen Warren
• [U-Boot] [PATCH v3 7/8] imx6: SPL support for iMX6 SabreSD   John Tobias
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] porting u-boot, few final questions   DaveKucharczyk
• [U-Boot] [PATCH v2 0/17] dm: Add I2C support and convert sandbox, tegra   Simon Glass
• [U-Boot] [PATCH v2 01/17] dm: i2c: Move error reporting into a common function   Simon Glass
• [U-Boot] [PATCH v2 02/17] dm: core: Allow access to the device's driver_id data   Simon Glass
• [U-Boot] [PATCH v2 03/17] dm: core: Add functions to find parent and OF data   Simon Glass
• [U-Boot] [PATCH v2 04/17] dm: fdt: Correct handling of aliases with embedded digits   Simon Glass
• [U-Boot] [PATCH v2 05/17] dm: Add a function to bind a device by driver name   Simon Glass
• [U-Boot] [PATCH v2 06/17] dm: spi: Correct handling of SPI chip selects in sandbox   Simon Glass
• [U-Boot] [PATCH v2 07/17] dm: spi: Use device_bind_driver() instead of our own function   Simon Glass
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Simon Glass
• [U-Boot] [PATCH v2 09/17] dm: i2c: Implement driver model support in the i2c command   Simon Glass
• [U-Boot] [PATCH v2 10/17] dm: i2c: Add I2C emulation driver for sandbox   Simon Glass
• [U-Boot] [PATCH v2 11/17] dm: i2c: Add a sandbox I2C driver   Simon Glass
• [U-Boot] [PATCH v2 12/17] dm: i2c: Add an I2C EEPROM simulator   Simon Glass
• [U-Boot] [PATCH v2 13/17] dm: i2c: config: Enable I2C for sandbox using driver model   Simon Glass
• [U-Boot] [PATCH v2 14/17] dm: i2c: dts: Add an I2C bus for sandbox   Simon Glass
• [U-Boot] [PATCH v2 15/17] dm: Add a simple EEPROM driver   Simon Glass
• [U-Boot] [PATCH v2 16/17] dm: i2c: Add tests for I2C   Simon Glass
• [U-Boot] [PATCH v2 17/17] dm: i2c: tegra: Convert to driver model   Simon Glass
• [U-Boot] [PATCH v1 2/2] imx: fix exception vectors relocation in i.MX27   trem
• [U-Boot] [PATCH v2] spl: Change debug to printf for "Unsupported boot-device"   Stefan Roese
• [U-Boot] [PATCH v1 2/2] imx: fix exception vectors relocation in i.MX27   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/2] Fix SoC-specific exception handling   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/2] cosmetic: arm: fix whitespace in arch/arm/lib/relocate.S   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/2] imx: fix exception vectors relocation in imx27   Albert ARIBAUD
• [U-Boot] [PATCH v2 06/17] dm: spi: Correct handling of SPI chip selects in sandbox   Jagan Teki
• [U-Boot] [PATCH v2 05/17] dm: Add a function to bind a device by driver name   Jagan Teki
• [U-Boot] [PATCH v2 07/17] dm: spi: Use device_bind_driver() instead of our own function   Jagan Teki
• [U-Boot] [PATCH v2] ARM: tegra: Add support for norrin board   Simon Glass
• [U-Boot] [PATCH v2 1/2] ARM: bcm: Enable five Cygnus boards   Steve Rae
• [U-Boot] [PATCH v2 2/2] ARM: bcm: Enable bcm11130 boards   Steve Rae
• [U-Boot] [PATCH 1/2] sandbox: Fix warnings due to 64-bit printf() strings   Simon Glass
• [U-Boot] [PATCH 2/2] sandbox: Fix warnings in cpu.c and os.c   Simon Glass
• [U-Boot] arm: socfpga: set skew settings for ethernet phy   dinguyen at opensource.altera.com
• [U-Boot] [GIT PULL] Zynq patches   Tom Rini
• [U-Boot] Pull request: u-boot-uniphier/master   Tom Rini
• [U-Boot] [PATCH] Revert "lib: bootm: add missing include"   Tom Rini
• [U-Boot] [RFC PATCH] sf: New SF-NOR framework   Jagannadha Sutradharudu Teki
• [U-Boot] [RFC PATCH] sf: New SF-NOR framework   Marek Vasut
• [U-Boot] [RFC PATCH] sf: New SF-NOR framework   Jagan Teki
• [U-Boot] [PATCH] Revert "ARM: SPL: do not set gd again"   Tom Rini
• [U-Boot] [PATCH] buildman: Save *.img files too   Tom Rini
• [U-Boot] [PATCH v4 0/7] iMX6 SabreSD SPL Support   John Tobias
• [U-Boot] [PATCH v4 1/7] imx6: add spl config for mx6sabresd   John Tobias
• [U-Boot] [PATCH v4 2/7] kconfig: imx6: add SUPPORT_SPL   John Tobias
• [U-Boot] [PATCH v4 3/7] mmc: imx6: call spl_board_mmc_init   John Tobias
• [U-Boot] [PATCH v4 4/7] imx6: add spl in the header file   John Tobias
• [U-Boot] [PATCH v4 5/7] imx6: add some flexibility for defining macros   John Tobias
• [U-Boot] [PATCH v4 6/7] imx6: SPL support for iMX6 SabreSD   John Tobias
• [U-Boot] [PATCH v4 7/7] imx6: add data configuration file for SPL   John Tobias
• [U-Boot] [RFC PATCH] sf: New SF-NOR framework   Marek Vasut
• [U-Boot] [PATCH v4 5/7] imx6: add some flexibility for defining macros   Otavio Salvador
• [U-Boot] [PATCH v4 5/7] imx6: add some flexibility for defining macros   John Tobias
• [U-Boot] [PATCH 0/33] x86: Add additional system setup for ivybridge   Simon Glass
• [U-Boot] [PATCH 01/33] Add build date values to Makefile   Simon Glass
• [U-Boot] [PATCH 02/33] Align embedded device tree correctly   Simon Glass
• [U-Boot] [PATCH 03/33] Add ALIGN_DOWN() to find next smallest alignment   Simon Glass
• [U-Boot] [PATCH 04/33] pci: Update pci_ids.h to include some missing IDs   Simon Glass
• [U-Boot] [PATCH 05/33] x86: Remove board_early_init_r()   Simon Glass
• [U-Boot] [PATCH 06/33] x86: Panic if there is not relocation data   Simon Glass
• [U-Boot] [PATCH 07/33] x86: Ensure that all relocation data is included in the image   Simon Glass
• [U-Boot] [PATCH 08/33] WIP: x86: Drop u-boot.srec from the Makefile   Simon Glass
• [U-Boot] [PATCH 09/33] x86: Factor out common values in the link script   Simon Glass
• [U-Boot] [PATCH 10/33] rtc: mc146818: Set up RTC at start of day   Simon Glass
• [U-Boot] [PATCH 11/33] x86: Add ioapic.h header   Simon Glass
• [U-Boot] [PATCH 12/33] x86: pci: Add handlers before and after a PCI hose scan   Simon Glass
• [U-Boot] [PATCH 13/33] x86: config: Enable plug-and-play for link PCI   Simon Glass
• [U-Boot] [PATCH 14/33] pci: Add functions to read and write a BAR address   Simon Glass
• [U-Boot] [PATCH 15/33] x86: ivybridge: Add support for BD82x6x PCH   Simon Glass
• [U-Boot] [PATCH 16/33] x86: Add basic i8259 implementation   Simon Glass
• [U-Boot] [PATCH 17/33] x86: Add ISA DMA implementation   Simon Glass
• [U-Boot] [PATCH 18/33] x86: Add a simple header file for ACPI   Simon Glass
• [U-Boot] [PATCH 19/33] x86: ivybridge: Add PCH init   Simon Glass
• [U-Boot] [PATCH 20/33] x86: ivybridge: Add additional LPC init   Simon Glass
• [U-Boot] [PATCH 21/33] x86: dts: Move PCI peripherals into a pci node   Simon Glass
• [U-Boot] [PATCH 22/33] x86: dts: Add LPC settings for link   Simon Glass
• [U-Boot] [PATCH 23/33] x86: ivybridge: Add SATA init   Simon Glass
• [U-Boot] [PATCH 24/33] x86: dts: Add SATA settings for link   Simon Glass
• [U-Boot] [PATCH 25/33] x86: ivybridge: Set up EHCI USB   Simon Glass
• [U-Boot] [PATCH 26/33] x86: config: Enable USB on link   Simon Glass
• [U-Boot] [PATCH 27/33] x86: ivybridge: Set up XHCI USB   Simon Glass
• [U-Boot] [PATCH 28/33] x86: Add Intel speedstep and turbo mode code   Simon Glass
• [U-Boot] [PATCH 29/33] x86: Add LAPIC setup code   Simon Glass
• [U-Boot] [PATCH 30/33] x86: Add init for model 206AX CPU   Simon Glass
• [U-Boot] [PATCH 31/33] x86: Drop some msr functions that we don't support   Simon Glass
• [U-Boot] [PATCH 32/33] x86: ivybridge: Add northbridge init functions   Simon Glass
• [U-Boot] [PATCH 33/33] x86: config: Enable SPI for chromebook_link   Simon Glass
• [U-Boot] [RFC PATCH] sf: New SF-NOR framework   Jagan Teki
• [U-Boot] [PATCH v7 2/6] fat: prepare for API change for files greater than 2GB   Simon Glass
• [U-Boot] [PATCH v7 3/6] ext4: prepare for API change for files greater than 2GB   Simon Glass
• [U-Boot] [PATCH v7 4/6] sandbox: prepare for API change for files greater than 2GB   Simon Glass
• [U-Boot] [PATCH v4 5/7] imx6: add some flexibility for defining macros   Otavio Salvador
• [U-Boot] [PATCH v7 5/6] fs: API changes to enable extra parameter to return size of type loff_t   Simon Glass
• [U-Boot] [PATCH v7 6/6] sandbox: script for testing sandbox/ext4/fat/fs commands   Simon Glass
• [U-Boot] [PATCH v4 5/7] imx6: add some flexibility for defining macros   John Tobias
• [U-Boot] [PATCH] Revert "ARM: SPL: do not set gd again"   Simon Glass
• [U-Boot] [PATCH v4 5/7] imx6: add some flexibility for defining macros   Troy Kisky
• [U-Boot] [PATCH v2 15/33] x86: Refactor PCI to permit alternate init   Simon Glass
• [U-Boot] [PATCH v4 5/7] imx6: add some flexibility for defining macros   Fabio Estevam
• [U-Boot] [PATCH v6 0/3] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
• [U-Boot] [PATCH] cros_ec: Fix uninitialised variable in cros_ec.c   Simon Glass
• [U-Boot] [PATCH v4 5/7] imx6: add some flexibility for defining macros   John Tobias
• [U-Boot] [PATCH v2 2/4] x86: Do TSC MSR calibration only for known/supported CPUs   Bin Meng
• [U-Boot] [PATCH 19/39] x86: Build a .rom file which can be flashed to an x86 machine   Bin Meng
• [U-Boot] [PATCH v2 10/33] x86: Tidy up timer code for Intel core architecture   Bin Meng
• [U-Boot] [PATCH 34/39] x86: ivybridge: Add early init for PCH devices   Bin Meng
• [U-Boot] [PATCH v2 32/33] x86: ivybridge: Implement SDRAM init   Bin Meng
• [U-Boot] [PATCH v2 15/33] x86: Refactor PCI to permit alternate init   Bin Meng
• [U-Boot] [PATCH v5 0/5] iMX6 SabreSD SPL Support   John Tobias
• [U-Boot] [PATCH v5 1/5] kconfig: imx6: add SUPPORT_SPL   John Tobias
• [U-Boot] [PATCH v5 2/5] imx6: add spl in the header file   John Tobias
• [U-Boot] [PATCH v5 3/5] imx6: add spl config for mx6sabresd   John Tobias
• [U-Boot] [PATCH v5 4/5] mmc: imx6: call spl_board_mmc_init   John Tobias
• [U-Boot] [PATCH v5 5/5] imx6: SPL support for iMX6 SabreSD   John Tobias
• [U-Boot] [PATCH v2 00/12] spi: sf: ICH SPI driver fix and flash params update   Bin Meng
• [U-Boot] [PATCH 1/2] mtd: denali: use CONFIG_SYS_NAND_SELF_INIT   Scott Wood
• [U-Boot] [PATCH 05/33] x86: Remove board_early_init_r()   Bin Meng
• [U-Boot] [PATCH 06/33] x86: Panic if there is not relocation data   Bin Meng
• [U-Boot] verified boot of beaglebone black   Srinivasan S
• [U-Boot] [PATCH] mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoC   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] powerpc/t2080: updating rcw for silicon v1.1   Shengzhou Liu
• [U-Boot] [PATCH 34/39] x86: ivybridge: Add early init for PCH devices   Simon Glass
• [U-Boot] [PATCH v2 32/33] x86: ivybridge: Implement SDRAM init   Simon Glass
• [U-Boot] [PATCH 19/39] x86: Build a .rom file which can be flashed to an x86 machine   Simon Glass
• [U-Boot] [PATCH 07/33] x86: Ensure that all relocation data is included in the image   Bin Meng
• [U-Boot] [PATCH 01/33] Add build date values to Makefile   Wolfgang Denk
• [U-Boot] [PATCH v2 15/33] x86: Refactor PCI to permit alternate init   Simon Glass
• [U-Boot] [PATCH 01/33] Add build date values to Makefile   Simon Glass
• [U-Boot] [PATCH 07/33] x86: Ensure that all relocation data is included in the image   Simon Glass
• [U-Boot] [PATCH 07/33] x86: Ensure that all relocation data is included in the image   Bin Meng
• [U-Boot] [PATCH v2 1/2] imx: mx6q/dl sabre_common: Move MMC ENV offset to 512KB position   Ye.Li
• [U-Boot] [PATCH v2 2/2] imx: mx6q/dlsabreauto: And NAND flash support   Ye.Li
• [U-Boot] [PATCH 09/33] x86: Factor out common values in the link script   Bin Meng
• [U-Boot] [PATCH 08/33] WIP: x86: Drop u-boot.srec from the Makefile   Bin Meng
• [U-Boot] [PATCH 10/33] rtc: mc146818: Set up RTC at start of day   Bin Meng
• [U-Boot] [PATCH 12/33] x86: pci: Add handlers before and after a PCI hose scan   Bin Meng
• [U-Boot] [PATCH v2 00/12] spi: sf: ICH SPI driver fix and flash params update   Jagan Teki
• [U-Boot] [PATCH 14/33] pci: Add functions to read and write a BAR address   Bin Meng
• [U-Boot] [PATCH 16/33] x86: Add basic i8259 implementation   Bin Meng
• [U-Boot] [PATCH 17/33] x86: Add ISA DMA implementation   Bin Meng
• [U-Boot] [PATCH 23/33] x86: ivybridge: Add SATA init   Bin Meng
• [U-Boot] [PATCH] arm: imx: make bmode command work with SPL/U-Boot combo   Stefano Babic
• [U-Boot] [PATCH] mx28evk: README: Revision C is also supported   Stefano Babic
• [U-Boot] [PATCH 10/33] rtc: mc146818: Set up RTC at start of day   Wolfgang Denk
• [U-Boot] [PATCH 29/33] x86: Add LAPIC setup code   Bin Meng
• [U-Boot] [PATCH] mx53loco: Change 'fdt_file' dynamically   Stefano Babic
• [U-Boot] [PATCH v4 5/7] imx6: add some flexibility for defining macros   Stefano Babic
• [U-Boot] [PATCH] powerpc/b4860: Enable law creation of MAPLE   Shaveta Leekha
• [U-Boot] [PATCH v3 1/3] stv0991: Add basic stv0991 architecture support   Albert ARIBAUD
• [U-Boot] [ANN] U-Boot v2015.01-rc1 released   Andreas Bießmann
• [U-Boot] [PATCH] arndale: Use config_distro_bootcmd.h   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] 85xx/b4860: Add alternate serdes protocols for B4860/B4420   Shaveta Leekha
• [U-Boot] [PATCH 2/3] B4860QDS: SGMII related updates   Shaveta Leekha
• [U-Boot] [PATCH 3/3] B4860: Add alternate LC VCO serdes protocols support in board file   Shaveta Leekha
• [U-Boot] [PATCH v3 7/8] imx6: SPL support for iMX6 SabreSD   Stefano Babic
• [U-Boot] [PATCH 04/19] dm: pmic: add implementation of driver model pmic uclass   Przemyslaw Marczak
• [U-Boot] [PATCH 1/3] 85xx/b4860: Add alternate serdes protocols for B4860/B4420   Shaveta Leekha
• [U-Boot] [PATCH 2/3] B4860QDS: SGMII related updates   Shaveta Leekha
• [U-Boot] [PATCH 3/3] B4860: Add alternate LC VCO serdes protocols support in board file   Shaveta Leekha
• [U-Boot] [PATCH 1/3] 85xx/b4860: Add alternate serdes protocols for B4860/B4420   Shaveta Leekha
• [U-Boot] [PATCH] arndale: Use config_distro_bootcmd.h   Ian Campbell
• [U-Boot] [PATCH 1/2] mtd: nand: omap_gpmc: Add CONFIG_SYS_NAND_USE_READY to enable ready/busy   Stefan Roese
• [U-Boot] [PATCH 2/2] arm: am335x: Enable CONFIG_SYS_NAND_USE_READY on siemens am33xx   Stefan Roese
• [U-Boot] [PATCH] arm: am33xx: Handle NAND+I2C boot-device the same way as NAND   Stefan Roese
• [U-Boot] [PATCH] sata: fix a bug in init_sata() for pci-sata card   Pengbo Li
• [U-Boot] [PATCH v2 2/2] imx: mx6q/dlsabreauto: And NAND flash support   Fabio Estevam
• [U-Boot] [PATCH v3] fs: make it possible to read the filesystem UUID   Christian Gmeiner
• [U-Boot] [PATCH v2] fs: make it possible to read the filesystem UUID   Christian Gmeiner
• [U-Boot] [PATCH v2] test: ums: Add sleep before unmount directory   Lukasz Majewski
• [U-Boot] [PATCH v6 2/3] Odroid-XU3: Add support for Odroid-XU3   Lukasz Majewski
• [U-Boot] [PATCH 1/2] mtd: denali: use CONFIG_SYS_NAND_SELF_INIT   Masahiro YAMADA
• [U-Boot] [PATCH 6/6] kbuild: Make scripts executable   Masahiro YAMADA
• [U-Boot] [PATCH v2 04/11] fdt: Add device tree memory bindings   Simon Glass
• [U-Boot] [PATCH v2 2/4] x86: Do TSC MSR calibration only for known/supported CPUs   Simon Glass
• [U-Boot] [PATCH 23/33] x86: ivybridge: Add SATA init   Simon Glass
• [U-Boot] [PATCH 10/33] rtc: mc146818: Set up RTC at start of day   Simon Glass
• [U-Boot] [PATCH 04/19] dm: pmic: add implementation of driver model pmic uclass   Simon Glass
• [U-Boot] [PATCH v6 1/3] exynos5: fix GPIO information of exynos5420   Lukasz Majewski
• [U-Boot] [PATCH v2 35/40] ARM: Implement non-cached memory support   Simon Glass
• [U-Boot] [PATCH] mx53loco: Change 'fdt_file' dynamically   Fabio Estevam
• [U-Boot] [PATCH v6 3/3] Odroid-XU3: Add documentation for Odroid-XU3   Lukasz Majewski
• [U-Boot] [PATCH v4 5/7] imx6: add some flexibility for defining macros   Bill Pringlemeir
• [U-Boot] [PATCH v3 7/8] imx6: SPL support for iMX6 SabreSD   John Tobias
• [U-Boot] [PATCH 7/9] net: rtl8169: Properly align buffers   Simon Glass
• [U-Boot] [PATCH v2] test: ums: Add sleep before unmount directory   Wolfgang Denk
• [U-Boot] [ANN] U-Boot v2015.01-rc1 released   Tom Rini
• [U-Boot] [PATCH v6 0/5] iMX6 SabreSD SPL Support   John Tobias
• [U-Boot] [PATCH v6 1/5] imx6: add spl config for mx6sabresd   John Tobias
• [U-Boot] [PATCH v6 2/5] imx6: add data configuration file for SPL   John Tobias
• [U-Boot] [PATCH v6 3/5] kconfig: imx6: add SUPPORT_SPL   John Tobias
• [U-Boot] [PATCH v6 4/5] imx6: add spl in the header file   John Tobias
• [U-Boot] [PATCH v6 5/5] imx6: SPL support for iMX6 SabreSD   John Tobias
• [U-Boot] [PATCH 1/6] arm: socfpga: Add DW master SPI clock to clock_manager.c   Pavel Machek
• [U-Boot] [PATCH 2/6] arm: socfpga: Add socfpga_spim_enable() to reset_manager.c   Pavel Machek
• [U-Boot] [PATCH 3/6] spi: Add designware master SPI DM driver used on SoCFPGA   Pavel Machek
• [U-Boot] [PATCH 4/6] arm: socfpga: dts: Add spi0/1 dts nodes for the Designware master SPI devices   Pavel Machek
• [U-Boot] [PATCH 5/6] arm: socfpga: dts: socrates: Add spi1/2 aliases needed DM SPI probing   Pavel Machek
• [U-Boot] [PATCH 6/6] arm: socfpga: Add Designware (DW) SPI support to config header   Pavel Machek
• [U-Boot] [PATCH v3] arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target   Pavel Machek
• [U-Boot] [PATCH v2] test: ums: Add sleep before unmount directory   Stephen Warren
• [U-Boot] [PATCH v6 0/5] iMX6 SabreSD SPL Support   Fabio Estevam
• [U-Boot] [ANN] U-Boot v2015.01-rc1 released   Nikita Kiryanov
• [U-Boot] [PATCH v6 0/5] iMX6 SabreSD SPL Support   John Tobias
• [U-Boot] [ANN] U-Boot v2015.01-rc1 released   Tom Rini
• [U-Boot] [PATCH v2] ARM: tegra: Add support for norrin board   Stephen Warren
• [U-Boot] [PATCH v2] ARM: tegra: Add support for norrin board   Stephen Warren
• [U-Boot] [PATCH v2] ARM: tegra: Add support for norrin board   Simon Glass
• [U-Boot] [PATCH v2] ARM: tegra: Add support for norrin board   Simon Glass
• [U-Boot] [PATCH v6 0/5] iMX6 SabreSD SPL Support   Nikolay Dimitrov
• [U-Boot] [PATCH v6 0/5] iMX6 SabreSD SPL Support   Fabio Estevam
• [U-Boot] [PATCH 1/2] mtd: nand: omap_gpmc: Add CONFIG_SYS_NAND_USE_READY to enable ready/busy   Scott Wood
• [U-Boot] [PATCH v6 0/5] iMX6 SabreSD SPL Support   Nikolay Dimitrov
• [U-Boot] [ANN] U-Boot v2015.01-rc1 released   Tom Rini
• [U-Boot] [PATCH v6 0/5] iMX6 SabreSD SPL Support   Fabio Estevam
• [U-Boot] [PATCH v6 0/5] iMX6 SabreSD SPL Support   John Tobias
• [U-Boot] [PATCH 1/2] mtd: nand: omap_gpmc: Add CONFIG_SYS_NAND_USE_READY to enable ready/busy   Tom Rini
• [U-Boot] [PATCH v2 04/11] fdt: Add device tree memory bindings   Tom Rini
• [U-Boot] [PATCH v2] test: ums: Add sleep before unmount directory   Lukasz Majewski
• [U-Boot] [PATCH 2/2] spi: add common spi3 controller driver   Jagan Teki
• [U-Boot] [PATCH v2 04/11] fdt: Add device tree memory bindings   Simon Glass
• [U-Boot] [RFC PATCH] sf: New SF-NOR framework   Marek Vasut
• [U-Boot] [ANN] U-Boot v2015.01-rc1 released   Tom Rini
• [U-Boot] [PATCH v7 0/5] iMX6 SabreSD SPL Support   John Tobias
• [U-Boot] [PATCH v7 1/5] imx6: add spl config for mx6sabresd   John Tobias
• [U-Boot] [PATCH v7 2/5] imx6: add data configuration file for SPL   John Tobias
• [U-Boot] [PATCH v7 3/5] kconfig: imx6: add SUPPORT_SPL   John Tobias
• [U-Boot] [PATCH v7 4/5] imx6: add spl in the header file   John Tobias
• [U-Boot] [PATCH v7 5/5] imx6: SPL support for iMX6 SabreSD   John Tobias
• [U-Boot] [PATCH v7 0/5] iMX6 SabreSD SPL Support   Fabio Estevam
• [U-Boot] [PATCH v2 38/40] net: rtl8169: Properly align buffers   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 7/9] net: rtl8169: Properly align buffers   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 7/9] net: rtl8169: Properly align buffers   Simon Glass
• [U-Boot] [PATCH v3 0/30] ARM: tegra: Add PCIe support   Simon Glass
• [U-Boot] [PATCH v3 01/30] vsprintf: Add modifier for phys_addr_t   Simon Glass
• [U-Boot] [PATCH v3 02/30] pci: Abort early if bus does not exist   Simon Glass
• [U-Boot] [PATCH v3 03/30] pci: Honour pci_skip_dev()   Simon Glass
• [U-Boot] [PATCH v3 04/30] Add pr_fmt() macro   Simon Glass
• [U-Boot] [PATCH v3 05/30] power: Add AMS AS3722 PMIC support   Simon Glass
• [U-Boot] [PATCH v3 06/30] ARM: tegra: Implement tegra_plle_enable()   Simon Glass
• [U-Boot] [PATCH v3 07/30] ARM: tegra: Provide PCIEXCLK reset ID   Simon Glass
• [U-Boot] [PATCH v3 08/30] ARM: tegra: Implement powergate support   Simon Glass
• [U-Boot] [PATCH v3 09/30] ARM: tegra: Implement XUSB pad controller   Simon Glass
• [U-Boot] [PATCH v3 10/30] ARM: tegra: Add XUSB pad controller on Tegra124   Simon Glass
• [U-Boot] [PATCH v3 11/30] ARM: tegra: Enable XUSB pad controller on Jetson TK1   Simon Glass
• [U-Boot] [PATCH v3 12/30] pci: tegra: Add Tegra PCIe driver   Simon Glass
• [U-Boot] [PATCH v3 13/30] ARM: tegra: Add Tegra20 PCIe device tree node   Simon Glass
• [U-Boot] [PATCH v3 14/30] ARM: tegra: Enable PCIe on TrimSlice   Simon Glass
• [U-Boot] [PATCH v3 15/30] ARM: tegra: Add GIC for Tegra30   Simon Glass
• [U-Boot] [PATCH v3 16/30] ARM: tegra: Add Tegra30 PCIe device tree node   Simon Glass
• [U-Boot] [PATCH v3 17/30] ARM: tegra: Enable PCIe on Cardhu   Simon Glass
• [U-Boot] [PATCH v3 18/30] ARM: tegra: Enable PCIe on Beaver   Simon Glass
• [U-Boot] [PATCH v3 19/30] ARM: tegra: Add GIC for Tegra124   Simon Glass
• [U-Boot] [PATCH v3 20/30] ARM: tegra: Add Tegra124 PCIe device tree node   Simon Glass
• [U-Boot] [PATCH v3 21/30] ARM: tegra: Enable PCIe on Jetson TK1   Simon Glass
• [U-Boot] [PATCH v3 22/30] ARM: cache_v7: Various minor cleanups   Simon Glass
• [U-Boot] [PATCH v3 23/30] ARM: cache-cp15: Use more accurate types   Simon Glass
• [U-Boot] [PATCH v3 24/30] malloc: Output region when debugging   Simon Glass
• [U-Boot] [PATCH v3 25/30] ARM: Implement non-cached memory support   Simon Glass
• [U-Boot] [PATCH v3 26/30] ARM: tegra: Enable non-cached memory   Simon Glass
• [U-Boot] [PATCH v3 27/30] net: rtl8169: Honor CONFIG_SYS_RX_ETH_BUFFER   Simon Glass
• [U-Boot] [PATCH v3 28/30] net: rtl8169: Properly align buffers   Simon Glass
• [U-Boot] [PATCH v3 29/30] net: rtl8169: Use non-cached memory if available   Simon Glass
• [U-Boot] [PATCH v3 30/30] net: rtl8169: Add support for RTL-8168/8111g   Simon Glass
• [U-Boot] [PATCH v7 0/3] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
• [U-Boot] [PATCH v7 1/3] exynos5: fix GPIO information of exynos5420   Hyungwon Hwang
• [U-Boot] [PATCH v7 2/3] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH v7 3/3] Odroid-XU3: Add documentation for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH v3 1/7] Exynos5800: Introduce new proid for Exynos5800   Simon Glass
• [U-Boot] [PATCH v3 2/7] Exynos5800: Add DTS for new board Peach-Pi   Simon Glass
• [U-Boot] [PATCH v3 3/7] Config: Exynos5800: Enable build for Peach-Pi   Simon Glass
• [U-Boot] [PATCH v3 4/7] DMC: Exynos5: Enable update mode for DREX controller   Simon Glass
• [U-Boot] [PATCH v3 5/7] Config: Exynos5420: Refactor SDRAM Bank and Size   Simon Glass
• [U-Boot] [PATCH v3 6/7] Exynos5: ddr3: Choose between single or double channel config   Simon Glass
• [U-Boot] [PATCH v3 7/7] Peach-Pi: Use the enhanced usb_copy() prototype   Simon Glass
• [U-Boot] [PATCH v3 0/7] Addition of new board Peach-Pi   Simon Glass
• [U-Boot] putc   Simon Glass
• [U-Boot] [PATCH v2] fs: make it possible to read the filesystem UUID   Simon Glass
• [U-Boot] [PATCH v2 08/11] fdt: Add ft_system_setup() function for system device tree additions   Simon Glass
• [U-Boot] [PATCH v2] mtd: nand: omap_gpmc: Always use ready/busy pin   Stefan Roese
• [U-Boot] [PATCH v2 0/9] dm: Introduce driver model for Atmel at91   Simon Glass
• [U-Boot] [PATCH] buildman: Save *.img files too   Simon Glass
• [U-Boot] Flat Image Tree and boot arguments   Simon Glass
• [U-Boot] [PATCH 1/5] powerpc/b4860qds: add xfi support   shh.xie at gmail.com
• [U-Boot] [PATCH 2/5] powerpc/b4860qds: dtb fixup for xfi   shh.xie at gmail.com
• [U-Boot] [PATCH 3/5] B4860QDS: Enable SFP or AMC on basis of hwconfig string   shh.xie at gmail.com
• [U-Boot] [PATCH 4/5] powerpc/b4860qds: add workaround for XFI   shh.xie at gmail.com
• [U-Boot] [PATCH] x86: Fix a warning with gcc 4.4.4   Simon Glass
• [U-Boot] [PATCH 5/5] B4860QDS: Enable enet port as per fsl_b4860_serdes2 string in hwconfig   shh.xie at gmail.com
• [U-Boot] [PATCH 0/4] kbuild: descend into SOC directory from CPU directory   Masahiro Yamada
• [U-Boot] [PATCH 1/4] kbuild: Descend into SOC directory from CPU directory   Masahiro Yamada
• [U-Boot] [PATCH 2/4] x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory   Masahiro Yamada
• [U-Boot] [PATCH 3/4] kbuild: use SoC-specific CONFIG to descend into SoC directory   Masahiro Yamada
• [U-Boot] [PATCH 4/4] tegra: do not descend into empty directories   Masahiro Yamada
• [U-Boot] [PATCH 4/4] tegra: do not descend into empty directories   Simon Glass
• [U-Boot] [PATCH 2/4] x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory   Simon Glass
• [U-Boot] [PATCH v3] x86: Replace fill_processor_name() with cpu_get_name()   Simon Glass
• [U-Boot] [PATCH v3] x86: Replace fill_processor_name() with cpu_get_name()   Simon Glass
• [U-Boot] [PATCH v2 01/33] Move early malloc() to before arch_cpu_init()   Simon Glass
• [U-Boot] [PATCH v2 02/33] fdt: Add a function to decode a variable-sized u32 array   Simon Glass
• [U-Boot] [PATCH v2 03/33] dm: serial: Move current serial port pointer to global_data   Simon Glass
• [U-Boot] [PATCH v2 04/33] dm: gpio: Add a function to read an ID from a list of GPIOs   Simon Glass
• [U-Boot] [PATCH v2 05/33] x86: Add ifdtool for working with Intel Flash Descriptor ROM images   Simon Glass
• [U-Boot] [PATCH v2 06/33] x86: config: Move common x86 configs to a common file   Simon Glass
• [U-Boot] [PATCH v2 07/33] x86: Add processor functions to halt and get stack pointer   Simon Glass
• [U-Boot] [PATCH v2 08/33] x86: Remove unnecessary find_fdt(), prepare_fdt() functions   Simon Glass
• [U-Boot] [PATCH v3] x86: Replace fill_processor_name() with cpu_get_name()   Simon Glass
• [U-Boot] [PATCH] x86: Fix a warning with gcc 4.4.4   Simon Glass
• [U-Boot] [PATCH v3 0/26] x86: Add support for running on bare hardware   Simon Glass
• [U-Boot] [PATCH v3 01/26] x86: Allow timer calibration to work on ivybridge   Simon Glass
• [U-Boot] [PATCH v3 02/26] x86: Drop old CONFIG_INTEL_CORE_ARCH code   Simon Glass
• [U-Boot] [PATCH v3 03/26] x96: ifdtool: Allow creation of an empty ROM   Simon Glass
• [U-Boot] [PATCH v3 04/26] x86: Add chromebook_link board   Simon Glass
• [U-Boot] [PATCH v3 05/26] x86: Build a .rom file which can be flashed to an x86 machine   Simon Glass
• [U-Boot] [PATCH v3 06/26] x86: Emit post codes in startup code for Chromebooks   Simon Glass
• [U-Boot] [PATCH v3 07/26] x86: chromebook_link: Implement CAR support (cache as RAM)   Simon Glass
• [U-Boot] [PATCH v3 08/26] x86: Refactor PCI to permit alternate init   Simon Glass
• [U-Boot] [PATCH v3 09/26] x86: Support use of PCI before relocation   Simon Glass
• [U-Boot] [PATCH v3 10/26] x86: ivybridge: Enable PCI in early init   Simon Glass
• [U-Boot] [PATCH v3 11/26] x86: pci: Allow configuration before relocation   Simon Glass
• [U-Boot] [PATCH v3 12/26] x86: ivybridge: Add early LPC init so that serial works   Simon Glass
• [U-Boot] [PATCH v3 13/26] x86: Tidy up coreboot header usage   Simon Glass
• [U-Boot] [PATCH v3 14/26] x86: Add clr/setbits functions   Simon Glass
• [U-Boot] [PATCH v3 15/26] x86: Add msr read/write functions that use a structure   Simon Glass
• [U-Boot] [PATCH v3 16/26] x86: ivybridge: Perform initial CPU setup   Simon Glass
• [U-Boot] [PATCH v3 17/26] x86: ivybridge: Check BIST value on boot   Simon Glass
• [U-Boot] [PATCH v3 18/26] x86: ivybridge: Perform Intel microcode update on boot   Simon Glass
• [U-Boot] [PATCH v3 19/26] x86: dts: Add microcode updates for ivybridge CPU   Simon Glass
• [U-Boot] [PATCH v3 20/26] x86: ivybridge: Add early init for PCH devices   Simon Glass
• [U-Boot] [PATCH v3 21/26] x86: ivybridge: Add support for early GPIO init   Simon Glass
• [U-Boot] [PATCH v3 22/26] x86: chromebook_link: Enable GPIO support   Simon Glass
• [U-Boot] [PATCH v3 23/26] x86: Make show_boot_progress() common   Simon Glass
• [U-Boot] [PATCH v3 24/26] x86: ivybridge: Add LAPIC support   Simon Glass
• [U-Boot] [PATCH v3 25/26] x86: ivybridge: Implement SDRAM init   Simon Glass
• [U-Boot] [PATCH v3 26/26] x86: Rename chromebook-x86 to coreboot   Simon Glass
• [U-Boot] [PATCH v7 0/3] Adds support for Exynos5422 odroid xu3 board   Jaehoon Chung
• [U-Boot] [PATCH v3 01/26] x86: Allow timer calibration to work on ivybridge   Bin Meng
• [U-Boot] [PATCH] km_arm: convert the km_arm boards to the generic board support   Albert ARIBAUD
• [U-Boot] [PATCH v3 02/26] x86: Drop old CONFIG_INTEL_CORE_ARCH code   Bin Meng
• [U-Boot] [PATCH v2 4/4] ARM: ls102xa: allow all the peripheral access permissions as R/W.   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] ARM: ls102xa: allow all the peripheral access permissions as R/W.   York Sun
• [U-Boot] [PATCH v3 06/26] x86: Emit post codes in startup code for Chromebooks   Bin Meng
• [U-Boot] [PATCH v3 08/26] x86: Refactor PCI to permit alternate init   Bin Meng
• [U-Boot] [PATCH v3 0/5] ls102xa: HYP/non-sec: for ls102xa.   Albert ARIBAUD
• [U-Boot] [PATCH v3 09/26] x86: Support use of PCI before relocation   Bin Meng
• [U-Boot] [PATCH v2] spl: Change debug to printf for "Unsupported boot-device"   Heiko Schocher
• [U-Boot] [PATCH 2/2] spi: add common spi3 controller driver   Scott Jiang
• [U-Boot] [PATCH v3 03/26] x96: ifdtool: Allow creation of an empty ROM   Masahiro Yamada
• [U-Boot] [PATCH 1/3 v2] blackfin: rename bfin-twi_i2c driver to adi_i2c   Scott Jiang
• [U-Boot] [PATCH 2/3 v2] adi_i2c: convert to use general io accessors.   Scott Jiang
• [U-Boot] [PATCH 3/3 v2] blackfin: convert to use CONFIG_SYS_I2C framework   Scott Jiang
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH v7 5/5] imx6: SPL support for iMX6 SabreSD   Stefano Babic
• [U-Boot] [PATCH v7 2/3] Odroid-XU3: Add support for Odroid-XU3   Jaehoon Chung
• [U-Boot] [PATCH v7 4/5] imx6: add spl in the header file   Stefano Babic
• [U-Boot] [PATCH] x86: Fix a warning with gcc 4.4.4   Måns Rullgård
• [U-Boot] [PATCH] x86: Fix a warning with gcc 4.4.4   Bin Meng
• [U-Boot] [PATCH] ARM: remove unused CPU directory   Masahiro Yamada
• [U-Boot] [PATCH] config: remove redundant CONFIG_SYS_PROMPT defines   Masahiro Yamada
• [U-Boot] [ANN] U-Boot v2015.01-rc1 released   Stefano Babic
• [U-Boot] [PATCH] arm: mx6: Fix missing Kconfig option for Novena   Marek Vasut
• [U-Boot] [ANN] U-Boot v2015.01-rc1 released   Marek Vasut
• [U-Boot] putc   Martin Dorwig
• [U-Boot] [PATCH 0/4] Add more boolean configs to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 1/4] FIT: add some FIT configurations to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 2/4] hush: add CONFIG_HUSH_PARSER to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 3/4] commands: add more command entries in Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 4/4] spl: fix descending condition to drivers/mtd/nand/   Masahiro Yamada
• [U-Boot] [PATCH 0/2] spl: MMC U-Boot image load from raw partition   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/2] mtd: denali: Use SELF_INIT to fix up registers after nand_scan_ident()   Masahiro Yamada
• [U-Boot] [PATCH v2 1/2] mtd: denali: use CONFIG_SYS_NAND_SELF_INIT   Masahiro Yamada
• [U-Boot] [PATCH v2 2/2] mtd: denali: set some registers after nand_scan_ident()   Masahiro Yamada
• [U-Boot] [PATCH v3 01/14] arm: spl: Avoid setting up a duplicate global data structure   Albert ARIBAUD
• [U-Boot] [PATCH] arm: mx6: Fix missing Kconfig option for Novena   Masahiro Yamada
• [U-Boot] arm: socfpga: set skew settings for ethernet phy   Pavel Machek
• [U-Boot] arm: socfpga: set skew settings for ethernet phy   Wolfgang Denk
• [U-Boot] [PATCH] zynq: zybo: Move CONFIG_DEFAULT_DEVICE_TREE to defconfig   Michal Simek
• [U-Boot] [GIT PULL] Zynq patches   Michal Simek
• [U-Boot] arm: socfpga: set skew settings for ethernet phy   Pavel Machek
• [U-Boot] arm: socfpga: set skew settings for ethernet phy   Albert ARIBAUD
• [U-Boot] [PATCH v7 4/5] imx6: add spl in the header file   Fabio Estevam
• [U-Boot] arm: socfpga: set skew settings for ethernet phy   Pavel Machek
• [U-Boot] [PATCH v7 4/5] imx6: add spl in the header file   Fabio Estevam
• [U-Boot] arm: socfpga: set skew settings for ethernet phy   Marek Vasut
• [U-Boot] [PATCH] arm: mx6: Fix missing Kconfig option for Novena   Marek Vasut
• [U-Boot] [PATCH] ARM: remove unused CPU directory   Albert ARIBAUD
• [U-Boot] Updated: Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] arm: ls102xa: Enable snooping for CCI-400 S0 slave interface   Alison Wang
• [U-Boot] [PATCH v7 4/5] imx6: add spl in the header file   Fabio Estevam
• [U-Boot] [PATCH v7 4/5] imx6: add spl in the header file   Stefano Babic
• [U-Boot] [PATCH v7 4/5] imx6: add spl in the header file   Fabio Estevam
• [U-Boot] Please pull u-boot-sunxi/master into master   Hans de Goede
• [U-Boot] [ANN] U-Boot v2015.01-rc1 released   Dirk Eibach
• [U-Boot] [PATCH] arm: mx6: Fix missing Kconfig option for Novena   Stefano Babic
• [U-Boot] [PATCH v7 0/5] iMX6 SabreSD SPL Support   Stefano Babic
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PATCH V2] powerpc: remove orphaned boards mcc200 and prs200   Tom Rini
• [U-Boot] [PATCH 6/6] kbuild: Make scripts executable   Tom Rini
• [U-Boot] [PATCH v2 1/2] kconfig: arm: select CPU_V7 for some new boards   Tom Rini
• [U-Boot] [PATCH v2 2/2] kconfig: arm: move "armv8" define to arch/arm/Kconfig   Tom Rini
• [U-Boot] [PATCH v2 1/2] imx: mx6q/dl sabre_common: Move MMC ENV offset to 512KB position   Stefano Babic
• [U-Boot] [GIT PULL] Zynq patches   Tom Rini
• [U-Boot] [PATCH v2 2/2] imx: mx6q/dlsabreauto: And NAND flash support   Stefano Babic
• [U-Boot] [PATCH] zynq: zybo: Move CONFIG_DEFAULT_DEVICE_TREE to defconfig   Tom Rini
• [U-Boot] Updated: Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [ANN] U-Boot v2015.01-rc1 released   Tom Rini
• [U-Boot] [PATCH] ot1200: fix card detect for usdhc4   Stefano Babic
• [U-Boot] [PATCH] arm: mx6: Fix missing Kconfig option for Novena   Tom Rini
• [U-Boot] [PATCH] ot1200: add support for EHCI   Stefano Babic
• [U-Boot] [PATCH] mx53loco: Change 'fdt_file' dynamically   Stefano Babic
• [U-Boot] Please pull u-boot-sunxi/master into master   Tom Rini
• [U-Boot] [PATCH v7 4/5] imx6: add spl in the header file   John Tobias
• [U-Boot] [PATCH v7 4/5] imx6: add spl in the header file   John Tobias
• [U-Boot] [PATCH] arm: mx6: Fix missing Kconfig option for Novena   Marek Vasut
• [U-Boot] [PATCH v3 03/26] x96: ifdtool: Allow creation of an empty ROM   Simon Glass
• [U-Boot] [PATCH] x86: Fix a warning with gcc 4.4.4   Simon Glass
• [U-Boot] putc   Simon Glass
• [U-Boot] verified boot of beaglebone black   Simon Glass
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Victor Ascroft
• [U-Boot] [PATCH v7 4/5] imx6: add spl in the header file   Stefano Babic
• [U-Boot] [PATCH v3 1/5] power: pfuze100: Update definitions for buck regulators   Przemyslaw Marczak
• [U-Boot] [PATCH v3 1/5] ARM: HYP/non-sec: add the pen address BE mode support.   York Sun
• [U-Boot] [PATCH v3 2/5] ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.   York Sun
• [U-Boot] [PATCH v3 3/5] ls102xa: HYP/non-sec: support for ls102xa boards   York Sun
• [U-Boot] [PATCH v3 4/5] ARM: ls102xa: allow all the peripheral access permissions as R/W.   York Sun
• [U-Boot] [PATCH v3 5/5] ARM: ls102xa: Setting device's stream id for SMMUs.   York Sun
• [U-Boot] [PATCH v2 4/4] ARM: ls102xa: allow all the peripheral access permissions as R/W.   York Sun
• [U-Boot] [PATCH] mx6: video_skip: Fix crash on NULL pointer   Stefano Babic
• [U-Boot] [PATCH v3 0/2] Fix SoC-specific exception handling   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/2] cosmetic: arm: fix whitespace in arch/arm/lib/relocate.S   Albert ARIBAUD
• [U-Boot] [PATCH v3 2/2] imx: fix exception vectors relocation in imx27   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] mx6sabresd: Fix error handling in board_mmc_init()   Stefano Babic
• [U-Boot] [PATCH 2/2] mx6sabresd: Staticize when possible   Stefano Babic
• [U-Boot] [PATCH] ubi: reset relevant globals in ubi_exit()   Andrew Ruder
• [U-Boot] [PATCH v3 0/2] Fix SoC-specific exception handling   Albert ARIBAUD
• [U-Boot] [PATCH v2] ext4: goni: Modify dfu_alt_info's file names to have absolute path   Lukasz Majewski
• [U-Boot] [PATCH v4 0/7] Addition of new board Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH v4 1/7] Exynos5800: Introduce new proid for Exynos5800   Akshay Saraswat
• [U-Boot] [PATCH v4 2/7] Exynos5800: Add DTS for new board Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH v4 3/7] Config: Exynos5800: Enable build for Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH v4 4/7] DMC: Exynos5: Enable update mode for DREX controller   Akshay Saraswat
• [U-Boot] [PATCH v4 5/7] Config: Exynos5420: Refactor SDRAM Bank and Size   Akshay Saraswat
• [U-Boot] [PATCH v4 6/7] Exynos5: ddr3: Choose between single or double channel config   Akshay Saraswat
• [U-Boot] [PATCH v4 7/7] Peach-Pi: Use the enhanced usb_copy() prototype   Akshay Saraswat
• [U-Boot] [PATCH v4] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Stefano Babic
• [U-Boot] [PATCH v3 0/7] Addition of new board Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH v2] arm: socfpga: set skew settings for ethernet phy   dinguyen at opensource.altera.com
• [U-Boot] [PATCH v3 0/7] Addition of new board Peach-Pi   Simon Glass
• [U-Boot] [PATCH v3 1/5] power: pfuze100: Update definitions for buck regulators   Stefano Babic
• [U-Boot] Booting non devicetree enabled kernels using u-boot build with CONFIG_OF_LIBFDT ?   Hans de Goede
• [U-Boot] [PATCH v2 0/7] Update gdsys board support   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 1/7] board: dlvision: Reduce memory footprint   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 2/7] mtd: Handle 29LV800BT   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 3/7] common: Fix cmd_fpgad addressing   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 4/7] board: dlvision-10g: Compile fix   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 5/7] board: iocon: Fix fpga index in print_fpga_info()   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 6/7] board: iocon: Fix uninitialized access   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v2 7/7] mpc83xx: Add gdsys hrcon board   dirk.eibach at gdsys.cc
• [U-Boot] Booting non devicetree enabled kernels using u-boot build with CONFIG_OF_LIBFDT ?   Tom Rini
• [U-Boot] Booting non devicetree enabled kernels using u-boot build with CONFIG_OF_LIBFDT ?   Hans de Goede
• [U-Boot] [PATCH v2 0/3] ARM: Add armv7/Kconfig and allow booting in secure mode on non-secure boot capable systems   Hans de Goede
• [U-Boot] [PATCH v2 1/3] Kconfig: Add EXPERT option   Hans de Goede
• [U-Boot] [PATCH v2 2/3] ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options   Hans de Goede
• [U-Boot] [PATCH v2 3/3] ARM: bootm: Allow booting in secure mode on hyp capable systems   Hans de Goede
• [U-Boot] putc   Wolfgang Denk
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Wolfgang Denk
• [U-Boot] [PATCH] tools/kwbimage.c: fix parser error handling   Jeroen Hofstee
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   Fabio Estevam
• [U-Boot] [PATCH 0/2] spl: MMC U-Boot image load from raw partition   Paul Kocialkowski
• [U-Boot] Memory test post relocation   DaveKucharczyk
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   Nikolay Dimitrov
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   Fabio Estevam
• [U-Boot] [PATCH v2] tools/kwbimage: Fix compilation warning   York Sun
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   John Tobias
• [U-Boot] buildman with distcc   York Sun
• [U-Boot] buildman with distcc   York Sun
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   Stefano Babic
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   Fabio Estevam
• [U-Boot] buildman with distcc   Simon Glass
• [U-Boot] buildman with distcc   York Sun
• [U-Boot] buildman with distcc   Simon Glass
• [U-Boot] buildman with distcc   York Sun
• [U-Boot] buildman with distcc   Simon Glass
• [U-Boot] putc   Simon Glass
• [U-Boot] buildman with distcc   York Sun
• [U-Boot] buildman with distcc   Simon Glass
• [U-Boot] buildman with distcc   York Sun
• [U-Boot] iMX6 DDR Calibration Value   John Tobias
• [U-Boot] [PATCH v2 1/3] Kconfig: Add EXPERT option   Masahiro Yamada
• [U-Boot] buildman with distcc   York Sun
• [U-Boot] [PATCH v2] powerpc/t2080: updating rcw for silicon v1.1   Shengzhou Liu
• [U-Boot] [PATCH] Fix console functions for U-Boot API   Simon Glass
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Victor Ascroft
• [U-Boot] [PATCH 23/33] x86: ivybridge: Add SATA init   Simon Glass
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Wolfgang Denk
• [U-Boot] [PATCH v3] arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target   Masahiro Yamada
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Victor Ascroft
• [U-Boot] [PATCH] arm: ls1021a: Add CONFIG_DOS_PARTITION and CONFIG_CMD_FAT support   Alison Wang
• [U-Boot] [PATCH] ubi: reset relevant globals in ubi_exit()   Heiko Schocher
• [U-Boot] [PATCH v8 0/3] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
• [U-Boot] [PATCH v8 1/3] exynos5: fix GPIO information of exynos5420   Hyungwon Hwang
• [U-Boot] [PATCH v8 2/3] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH v8 3/3] Odroid-XU3: Add documentation for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH v2 4/4] ARM: ls102xa: allow all the peripheral access permissions as R/W.   Albert ARIBAUD
• [U-Boot] [PATCH] mcf: Fix cppcheck errors about uninitialized variables   Alison Wang
• [U-Boot] [PATCH v2 1/3] Kconfig: Add EXPERT option   Albert ARIBAUD
• [U-Boot] [PATCH] arm: socfpga: dts: Move to SPDX license identifiers   Stefan Roese
• [U-Boot] [PATCH v2 1/3] Kconfig: Add EXPERT option   Masahiro Yamada
• [U-Boot] [PATCH v2 0/3] ARM: Add armv7/Kconfig and allow booting in secure mode on non-secure boot capable systems   Albert ARIBAUD
• [U-Boot] [PATCH v3] arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target   Stefan Roese
• [U-Boot] [PATCH v2 2/3] ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options   Albert ARIBAUD
• [U-Boot] [PATCH v3] arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target   Masahiro Yamada
• [U-Boot] [PATCH v2 3/3] ARM: bootm: Allow booting in secure mode on hyp capable systems   Albert ARIBAUD
• [U-Boot] [PATCH] arm: socfpga: Add myself as maintainer for the SoCrates board   Stefan Roese
• [U-Boot] [PATCH v3 3/5] ls102xa: HYP/non-sec: support for ls102xa boards   Albert ARIBAUD
• [U-Boot] [PATCH v3 22/30] ARM: cache_v7: Various minor cleanups   Albert ARIBAUD
• [U-Boot] [PATCH v3 23/30] ARM: cache-cp15: Use more accurate types   Albert ARIBAUD
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   Stefano Babic
• [U-Boot] [PATCH v2 3/3] ARM: bootm: Allow booting in secure mode on hyp capable systems   Hans de Goede
• [U-Boot] Memory test post relocation   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/3] Kconfig: Add EXPERT option   Albert ARIBAUD
• [U-Boot] [PATCH v5 0/3] ARM: Add armv7/Kconfig and allow booting in secure mode on non-secure boot capable systems   Hans de Goede
• [U-Boot] [PATCH v5 1/3] Kconfig: Add EXPERT option   Hans de Goede
• [U-Boot] [PATCH v5 2/3] ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options   Hans de Goede
• [U-Boot] [PATCH v5 3/3] ARM: bootm: Allow booting in secure mode on hyp capable systems   Hans de Goede
• [U-Boot] [PATCH v2 2/3] ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options   Hans de Goede
• [U-Boot] [PATCH v5 1/3] Kconfig: Add EXPERT option   Albert ARIBAUD
• [U-Boot] [PATCH v5 1/3] Kconfig: Add EXPERT option   Hans de Goede
• [U-Boot] [PATCH v3 3/5] ls102xa: HYP/non-sec: support for ls102xa boards   Li.Xiubo at freescale.com
• [U-Boot] [PATCH v3 2/2] imx: fix exception vectors relocation in imx27   Stefano Babic
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   Otavio Salvador
• [U-Boot] [PATCH v2] arm: socfpga: set skew settings for ethernet phy   Pavel Machek
• [U-Boot] [PATCH] arm: socfpga: dts: Move to SPDX license identifiers   Pavel Machek
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   Fabio Estevam
• [U-Boot] [PATCH] arm: socfpga: Add myself as maintainer for the SoCrates board   Pavel Machek
• [U-Boot] [PATCH v2] dfu: thor: fix: Modify dfu_get_alt() function to support absolute paths   Lukasz Majewski
• [U-Boot] [PATCH v2] test: ums: Add sleep before unmount directory   Lukasz Majewski
• [U-Boot] [ANN] U-Boot v2015.01-rc1 released   Valentin Longchamp
• [U-Boot] [PATCH v2 1/4] mx6sabresd: Move the DCD settings to spl code   Fabio Estevam
• [U-Boot] [PATCH v2 2/4] gw_ventana: Move the DCD settings to spl code   Fabio Estevam
• [U-Boot] [PATCH v2 3/4] novena: Move the DCD settings to spl code   Fabio Estevam
• [U-Boot] [PATCH v2 4/4] mx6: Use a common SPL configuration file   Fabio Estevam
• [U-Boot] [PATCH v3 3/5] ls102xa: HYP/non-sec: support for ls102xa boards   Albert ARIBAUD
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   Nikolay Dimitrov
• [U-Boot] [PATCH v3 2/2] imx: fix exception vectors relocation in imx27   Albert ARIBAUD
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   Fabio Estevam
• [U-Boot] [PATCH v2] dfu: thor: fix: Modify dfu_get_alt() function to support absolute paths   Marek Vasut
• [U-Boot] [PATCH v3 2/2] imx: fix exception vectors relocation in imx27   Albert ARIBAUD
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   Nikolay Dimitrov
• [U-Boot] [PATCH] mcf: Fix cppcheck errors about uninitialized variables   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: OMAP5: DRA7xx: Enable I2C5 operation   Lubomir Popov
• [U-Boot] [PATCH] ARM: OMAP5: DRA7xx: Enable I2C4 and I2C5 usage on the J6Eco EVM   Lubomir Popov
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   Stefano Babic
• [U-Boot] [PATCH] mcf: Fix cppcheck errors about uninitialized variables   Wolfgang Denk
• [U-Boot] [PATCH v3 2/2] imx: fix exception vectors relocation in imx27   Stefano Babic
• [U-Boot] [PATCH 1/3] imx: consolidate set_chipselect_size function   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx6: add weim registers   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx6qsabreauto: Add parallel NOR flash support   Fabio Estevam
• [U-Boot] [PATCH v3 1/3] exynos: Enable config_distro_defaults.h   Guillaume Gardet
• [U-Boot] [PATCH v3 2/3] exynos5: Use config_distro_bootcmd.h   Guillaume Gardet
• [U-Boot] [PATCH] ubi: reset relevant globals in ubi_exit()   Andrew Ruder
• [U-Boot] [PATCH v2] .travis.yml: build u-boot on travis-ci   Roger Meier
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Simon Glass
• [U-Boot] Memory test post relocation   DaveKucharczyk
• [U-Boot] Memory test post relocation   Fabio Estevam
• [U-Boot] Memory test post relocation   DaveKucharczyk
• [U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code   Nikolay Dimitrov
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH] tools/msximage.c: fix warning about nptr possibly uninitialized   Albert ARIBAUD
• [U-Boot] Memory test post relocation   Albert ARIBAUD
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] [PATCH] sunxi: ahci: Add a delay after enabling target power   Hans de Goede
• [U-Boot] Memory test post relocation   DaveKucharczyk
• [U-Boot] [PATCH] sunxi: ahci: Add a delay after enabling target power   Ian Campbell
• [U-Boot] Memory test post relocation   DaveKucharczyk
• [U-Boot] [PATCH 0/4] tqma6: improvements and cleanup   Markus Niebel
• [U-Boot] [PATCH 1/4] tqma6: (cosmetic) remove CONFIG_FLASH_SECTOR_SIZE   Markus Niebel
• [U-Boot] [PATCH 2/4] tqma6: add missing include   Markus Niebel
• [U-Boot] [PATCH 3/4] tqma6: add warning on failed setup_i2c   Markus Niebel
• [U-Boot] [PATCH 4/4] tqma6: use imx_ddr_size   Markus Niebel
• [U-Boot] Memory test post relocation   Wolfgang Denk
• [U-Boot] [PATCH 0/6] sunxi: HDMI (cfb) console support   Hans de Goede
• [U-Boot] [GIT] Pull request: u-boot-dfu   Lukasz Majewski
• [U-Boot] [PATCH 1/6] sun4i: Rename dram_clk_cfg to dram_clk_gate   Hans de Goede
• [U-Boot] [PATCH 2/6] sunxi: Add video pll clock functions   Hans de Goede
• [U-Boot] [PATCH 3/6] sunxi: video: Add cfb console driver for sunxi   Hans de Goede
• [U-Boot] [PATCH 4/6] sunxi: video: Add sun6i support   Hans de Goede
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [PATCH 6/6] sunxi: Add usb keyboard Kconfig option   Hans de Goede
• [U-Boot] Memory test post relocation   Albert ARIBAUD
• [U-Boot] Memory test post relocation   Albert ARIBAUD
• [U-Boot] [PATCH v3 2/2] imx: fix exception vectors relocation in imx27   Philippe Reynes
• [U-Boot] [PATCH v3 2/2] imx: fix exception vectors relocation in imx27   Philippe Reynes
• [U-Boot] Memory test post relocation   DaveKucharczyk
• [U-Boot] iMX6 DDR Calibration Value   Fabio Estevam
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH 2/3][v2] drivers: usb: Make usb device-tree fixup code architecture independent   York Sun
• [U-Boot] [PATCH v4 0/3] Add board level usb support for mxsxsabresd and mx6slevk   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Add myself as maintainer for the SoCrates board   Marek Vasut
• [U-Boot] iMX6 DDR Calibration Value   John Tobias
• [U-Boot] [PATCH v2] arm: socfpga: set skew settings for ethernet phy   Marek Vasut
• [U-Boot] [PATCH v2] arm: socfpga: set skew settings for ethernet phy   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: dts: Move to SPDX license identifiers   Marek Vasut
• [U-Boot] [PATCH v2 3/4] novena: Move the DCD settings to spl code   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
• [U-Boot] [PATCH v6 0/5] add i.MX6 thermal sensor driver   nitin.garg at freescale.com
• [U-Boot] [PATCH v6 1/4] mx6: clock: Add api to enable pll3   nitin.garg at freescale.com
• [U-Boot] [PATCH v6 2/4] mx6: thermal: Add i.MX6 CPU thermal sensor support   nitin.garg at freescale.com
• [U-Boot] [PATCH v6 3/4] mx6: thermal: Check cpu temperature via thermal sensor   nitin.garg at freescale.com
• [U-Boot] [PATCH v6 4/4] mx6: thermal: Enable thermal sensor for mx6 sabre boards.   nitin.garg at freescale.com
• [U-Boot] [PATCH 3/6] spi: Add designware master SPI DM driver used on SoCFPGA   Marek Vasut
• [U-Boot] [PATCH 3/6] sunxi: video: Add cfb console driver for sunxi   Anatolij Gustschin
• [U-Boot] [PATCH 6/6] arm: socfpga: Add Designware (DW) SPI support to config header   Marek Vasut
• [U-Boot] Memory test post relocation   DaveKucharczyk
• [U-Boot] [PATCH 4/6] sunxi: video: Add sun6i support   Anatolij Gustschin
• [U-Boot] [PATCH 3/6] sunxi: video: Add cfb console driver for sunxi   Anatolij Gustschin
• [U-Boot] [PATCH v7 2/6] fat: prepare for API change for files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v7 4/6] sandbox: prepare for API change for files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v7 5/6] fs: API changes to enable extra parameter to return size of type loff_t   Suriyan Ramasami
• [U-Boot] [PATCH v7 6/6] sandbox: script for testing sandbox/ext4/fat/fs commands   Suriyan Ramasami
• [U-Boot] [PATCH v3 2/2] imx: fix exception vectors relocation in imx27   Fabio Estevam
• [U-Boot] please pull mpc85xx   York Sun
• [U-Boot] [PATCH] mpc85xx/kmp204x: raise u-boot size to 768KB   York Sun
• [U-Boot] [u-boot-release] [PATCH] Fman/mEMAC: mEMAC fix for 10G MAC and PHY   York Sun
• [U-Boot] [PATCH] driver/net/fm/memac_phy: set NEG bit for external MDIOs   York Sun
• [U-Boot] [PATCH] sbc8548: enable and test CONFIG_SYS_GENERIC_BOARD   York Sun
• [U-Boot] [PATCH] 85xx/b4:Correct USB DR controller liodn entry   York Sun
• [U-Boot] [PATCH] powerpc/t4rdb: Add support of CPLD   York Sun
• [U-Boot] [PATCH] t104xrdb: Add Errata A_007662, A_008007 workaround in pbi.cfg   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Use IFC accessor function   York Sun
• [U-Boot] [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR   York Sun
• [U-Boot] [PATCH] powerpc/BSC9131RDB: Enable creation of dynamic partitions for NAND   York Sun
• [U-Boot] [PATCH 1/2] powerpc/mpc83xx: Zero boot_flags arg for calling board_init_f()   York Sun
• [U-Boot] [PATCH 2/2] keymile/powerpc: move to the architecture-generic board system   York Sun
• [U-Boot] [PATCH v4] powerpc/85xx: enable some P1/P2 boards mtdparts for nor flash   York Sun
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Anatolij Gustschin
• [U-Boot] Memory test post relocation   DaveKucharczyk
• [U-Boot] [PATCH] driver/ddr/fsl: Add workaround for fauty SPD   York Sun
• [U-Boot] [Patch v2] driver/ddr/fsl: Add workaround for faulty SPD   York Sun
• [U-Boot] [PATCH v2 0/30] x86: Add additional system setup for ivybridge   Simon Glass
• [U-Boot] [PATCH v2 01/30] Align embedded device tree correctly   Simon Glass
• [U-Boot] [PATCH v2 02/30] Add ALIGN_DOWN() to find next smallest alignment   Simon Glass
• [U-Boot] [PATCH v2 03/30] pci: Update pci_ids.h to include some missing IDs   Simon Glass
• [U-Boot] [PATCH v2 04/30] x86: Remove board_early_init_r()   Simon Glass
• [U-Boot] [PATCH v2 05/30] x86: Panic if there is no relocation data   Simon Glass
• [U-Boot] [PATCH v2 06/30] x86: Ensure that all relocation data is included in the image   Simon Glass
• [U-Boot] [PATCH v2 07/30] x86: Factor out common values in the link script   Simon Glass
• [U-Boot] [PATCH v2 08/30] rtc: mc146818: Set up RTC at start of day   Simon Glass
• [U-Boot] [PATCH v2 09/30] x86: Add ioapic.h header   Simon Glass
• [U-Boot] [PATCH v2 10/30] x86: pci: Add handlers before and after a PCI hose scan   Simon Glass
• [U-Boot] [PATCH v2 11/30] x86: config: Enable plug-and-play for link PCI   Simon Glass
• [U-Boot] [PATCH v2 12/30] pci: Add functions to read and write a BAR address   Simon Glass
• [U-Boot] [PATCH v2 13/30] x86: Set up edge triggering on interrupt 9   Simon Glass
• [U-Boot] [PATCH v2 14/30] x86: ivybridge: Add support for BD82x6x PCH   Simon Glass
• [U-Boot] [PATCH v2 15/30] x86: Add a simple header file for ACPI   Simon Glass
• [U-Boot] [PATCH v2 16/30] x86: ivybridge: Add PCH init   Simon Glass
• [U-Boot] [PATCH v2 17/30] x86: ivybridge: Add additional LPC init   Simon Glass
• [U-Boot] [PATCH v2 18/30] x86: dts: Move PCI peripherals into a pci node   Simon Glass
• [U-Boot] [PATCH v2 19/30] x86: dts: Add LPC settings for link   Simon Glass
• [U-Boot] [PATCH v2 20/30] x86: ivybridge: Add SATA init   Simon Glass
• [U-Boot] [PATCH v2 21/30] x86: dts: Add SATA settings for link   Simon Glass
• [U-Boot] [PATCH v2 22/30] x86: ivybridge: Set up EHCI USB   Simon Glass
• [U-Boot] [PATCH v2 23/30] x86: config: Enable USB on link   Simon Glass
• [U-Boot] [PATCH v2 24/30] x86: ivybridge: Set up XHCI USB   Simon Glass
• [U-Boot] [PATCH v2 25/30] x86: Add Intel speedstep and turbo mode code   Simon Glass
• [U-Boot] [PATCH v2 26/30] x86: Add LAPIC setup code   Simon Glass
• [U-Boot] [PATCH v2 27/30] x86: Add init for model 206AX CPU   Simon Glass
• [U-Boot] [PATCH v2 28/30] x86: Drop some msr functions that we don't support   Simon Glass
• [U-Boot] [PATCH v2 29/30] x86: ivybridge: Add northbridge init functions   Simon Glass
• [U-Boot] [PATCH v2 30/30] x86: config: Enable SPI for chromebook_link   Simon Glass
• [U-Boot] [PATCH v3 22/30] ARM: cache_v7: Various minor cleanups   Simon Glass
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Simon Glass
• [U-Boot] [PATCH v2 06/30] x86: Ensure that all relocation data is included in the image   Bin Meng
• [U-Boot] [PATCH v2 07/30] x86: Factor out common values in the link script   Bin Meng
• [U-Boot] [PATCH v2 08/30] rtc: mc146818: Set up RTC at start of day   Bin Meng
• [U-Boot] [PATCH v2 12/30] pci: Add functions to read and write a BAR address   Bin Meng
• [U-Boot] [PATCH 0/19] x86: ivybridge: Add graphics support   Simon Glass
• [U-Boot] [PATCH 01/19] x86: Add a definition of asmlinkage   Simon Glass
• [U-Boot] [PATCH 02/19] Introduce a header file for the BIOS emulator   Simon Glass
• [U-Boot] [PATCH 03/19] x86: Add GDT descriptors for option ROMs   Simon Glass
• [U-Boot] [PATCH 04/19] x86: Add vesa mode configuration options   Simon Glass
• [U-Boot] [PATCH 05/19] Add support for Vesa BIOS extensions   Simon Glass
• [U-Boot] [PATCH 06/19] x86: Add support for running option ROMs natively   Simon Glass
• [U-Boot] [PATCH 07/19] pci: Add general support for execution of video ROMs   Simon Glass
• [U-Boot] [PATCH 08/19] x86: video: Add video driver for bare x86 boards   Simon Glass
• [U-Boot] [PATCH 09/19] x86: Allow an option ROM to be built into U-Boot   Simon Glass
• [U-Boot] [PATCH 10/19] x86: Add initial video device init for Intel GMA   Simon Glass
• [U-Boot] [PATCH 11/19] x86: dts: Add video information to the device tree   Simon Glass
• [U-Boot] [PATCH 12/19] x86: config: Enable video support for chromebook_link   Simon Glass
• [U-Boot] [PATCH 13/19] bios_emulator: Allow x86 to use the emulator   Simon Glass
• [U-Boot] [PATCH 14/19] bios_emulator: Add vesa support and allow ROMs to be passed in as data   Simon Glass
• [U-Boot] [PATCH 15/19] bios_emulator: Allow a custom interrupt handler to be installed   Simon Glass
• [U-Boot] [PATCH 16/19] bios_emulator: Add an option to enable debugging   Simon Glass
• [U-Boot] [PATCH 17/19] bios_emulator: Always print errors when opcode decode fails   Simon Glass
• [U-Boot] [PATCH 18/19] x86: chromebook_link: Enable the x86 emulator   Simon Glass
• [U-Boot] [PATCH 19/19] x86: chromebook_link: Enable the Chrome OS EC   Simon Glass
• [U-Boot] [PATCH v2 13/30] x86: Set up edge triggering on interrupt 9   Bin Meng
• [U-Boot] [PATCH v2 26/30] x86: Add LAPIC setup code   Bin Meng
• [U-Boot] [PATCH v2 26/30] x86: Add LAPIC setup code   Simon Glass
• [U-Boot] [PATCH v2 26/30] x86: Add LAPIC setup code   Bin Meng
• [U-Boot] [PATCH v2 26/30] x86: Add LAPIC setup code   Simon Glass
• [U-Boot] [PATCH v2 26/30] x86: Add LAPIC setup code   Bin Meng
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Victor Ascroft
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Victor Ascroft
• [U-Boot] [PATCH 08/19] x86: video: Add video driver for bare x86 boards   Anatolij Gustschin
• [U-Boot] Memory test post relocation   Albert ARIBAUD
• [U-Boot] Memory test post relocation   Albert ARIBAUD
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] [PATCH v6 0/5] add i.MX6 thermal sensor driver   Albert ARIBAUD
• [U-Boot] Memory test post relocation   Albert ARIBAUD
• [U-Boot] iMX6 DDR Calibration Value   Nikolay Dimitrov
• [U-Boot] [PATCH 3/6] spi: Add designware master SPI DM driver used on SoCFPGA   Stefan Roese
• [U-Boot] [PATCH 6/6] arm: socfpga: Add Designware (DW) SPI support to config header   Stefan Roese
• [U-Boot] [PATCH 6/6] arm: socfpga: Add Designware (DW) SPI support to config header   Marek Vasut
• [U-Boot] [PATCH 3/6] spi: Add designware master SPI DM driver used on SoCFPGA   Marek Vasut
• [U-Boot] [PATCH 3/6] sunxi: video: Add cfb console driver for sunxi   Hans de Goede
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [PATCH 1/2] wandboard: Fix error handling in board_mmc_init()   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx53loco: Fix error handling in board_mmc_init()   Fabio Estevam
• [U-Boot] [PATCH] mx6sabresd: State that only mx6q is supported in SPL   Fabio Estevam
• [U-Boot] [PATCH v2] arm: socfpga: set skew settings for ethernet phy   Pavel Machek
• [U-Boot] [PATCH 0/2] spl: MMC U-Boot image load from raw partition   Albert ARIBAUD
• [U-Boot] [PATCH v2] arm: socfpga: set skew settings for ethernet phy   Marek Vasut
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Simon Glass
• [U-Boot] [PATCH v2] arm: socfpga: set skew settings for ethernet phy   Pavel Machek
• [U-Boot] [PATCH v6 0/5] add i.MX6 thermal sensor driver   Nitin Garg
• [U-Boot] [PATCH 0/7] MIPS: convert all boards to generic-board   Daniel Schwierzeck
• [U-Boot] [PATCH 1/7] common/board_f: add setup of initial stack frame for MIPS   Daniel Schwierzeck
• [U-Boot] [PATCH 2/7] common/board_f: fix gcc warning on MIPS64   Daniel Schwierzeck
• [U-Boot] [PATCH 3/7] MIPS: dbau1x00: switch to generic board   Daniel Schwierzeck
• [U-Boot] [PATCH 4/7] MIPS: pb1x00: switch to generic board   Daniel Schwierzeck
• [U-Boot] [PATCH 5/7] MIPS: qemu_mips: switch to generic board   Daniel Schwierzeck
• [U-Boot] [PATCH 6/7] MIPS: vct: switch to generic board   Daniel Schwierzeck
• [U-Boot] [PATCH 7/7] MIPS: remove board.c   Daniel Schwierzeck
• [U-Boot] [PATCH v2] arm: socfpga: set skew settings for ethernet phy   Marek Vasut
• [U-Boot] [patch] net: micrel: configure skew values for   Marek Vasut
• [U-Boot] [PATCH 0/7] MIPS: bootm fixes and initial device tree support   Daniel Schwierzeck
• [U-Boot] [PATCH 1/7] MIPS: bootm: add missing initramfs relocation   Daniel Schwierzeck
• [U-Boot] [PATCH 2/7] MIPS: bootm: remove unused or redundant header files   Daniel Schwierzeck
• [U-Boot] [PATCH 3/7] MIPS: bootm: refactor preparation of Linux kernel command line   Daniel Schwierzeck
• [U-Boot] [PATCH 4/7] MIPS: bootm: refactor preparation of Linux kernel environment   Daniel Schwierzeck
• [U-Boot] [PATCH 5/7] MIPS: bootm: add mem, rd_start and rd_size to kernel command line   Daniel Schwierzeck
• [U-Boot] [PATCH 6/7] MIPS: bootm: prepare a flattened device tree for the kernel   Daniel Schwierzeck
• [U-Boot] [PATCH 7/7] MIPS: bootm: add bootstage reporting   Daniel Schwierzeck
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] [PATCH 6/7] MIPS: vct: switch to generic board   Stefan Roese
• [U-Boot] [PATCH 2/6] arm: socfpga: Add socfpga_spim_enable() to reset_manager.c   Stefan Roese
• [U-Boot] [PATCH v2] .travis.yml: build u-boot on travis-ci   Andreas Färber
• [U-Boot] [PATCH] sun7i: Drop CONFIG_ARMV7_PSCI_NR_CPUS   Ian Campbell
• [U-Boot] [PATCH 1/6] sun4i: Rename dram_clk_cfg to dram_clk_gate   Ian Campbell
• [U-Boot] [PATCH 2/6] sunxi: Add video pll clock functions   Ian Campbell
• [U-Boot] [PATCH 3/6] sunxi: video: Add cfb console driver for sunxi   Ian Campbell
• [U-Boot] [PATCH 4/6] sunxi: video: Add sun6i support   Ian Campbell
• [U-Boot] [PATCH 3/6] sunxi: video: Add cfb console driver for sunxi   Ian Campbell
• [U-Boot] [PATCH] imx:mx6sxsabresd fix pfuz probe failed   Peng Fan
• [U-Boot] [PATCH 1/5] arm: socfpga: dts: altr, rst-mgr.h: Move to SPDX license identifiers   Stefan Roese
• [U-Boot] [PATCH 2/5] arm: socfpga: Use only one clrbits_le32 call to deassert SPI reset bits   Stefan Roese
• [U-Boot] [PATCH 3/5] arm: socfpga: Add missing DW master SPI clock prototyp to clock_manager.h   Stefan Roese
• [U-Boot] [PATCH 4/5] spi: designware_spi: Some fixes / changes   Stefan Roese
• [U-Boot] [PATCH 5/5] arm: socfpga: DW_SPI: Remove clock info from config header   Stefan Roese
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Ian Campbell
• [U-Boot] [PATCH 6/6] sunxi: Add usb keyboard Kconfig option   Ian Campbell
• [U-Boot] [PATCH] sun7i: Drop CONFIG_ARMV7_PSCI_NR_CPUS   Marc Zyngier
• [U-Boot] [PATCH 3/6] sunxi: video: Add cfb console driver for sunxi   Hans de Goede
• [U-Boot] [PATCH 6/6] sunxi: Add usb keyboard Kconfig option   Hans de Goede
• [U-Boot] [PATCH] sun7i: Drop CONFIG_ARMV7_PSCI_NR_CPUS   Ian Campbell
• [U-Boot] [PATCH 3/6] sunxi: video: Add cfb console driver for sunxi   Ian Campbell
• [U-Boot] [PATCH 6/6] sunxi: Add usb keyboard Kconfig option   Ian Campbell
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [PATCH 6/6] sunxi: Add usb keyboard Kconfig option   Hans de Goede
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Ian Campbell
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [PATCH v2 0/4] sunxi: HDMI (cfb) console support   Hans de Goede
• [U-Boot] [PATCH v2 1/4] sunxi: video: Add cfb console driver for sunxi   Hans de Goede
• [U-Boot] [PATCH v2 2/4] sunxi: video: Add sun6i support   Hans de Goede
• [U-Boot] [PATCH v2 3/4] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [PATCH v2 4/4] sunxi: Add usb keyboard Kconfig option   Hans de Goede
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Ian Campbell
• [U-Boot] [PATCH 1/5] sun6i: Make dram clk and zq value Kconfig options   Hans de Goede
• [U-Boot] [PATCH 2/5] sun6i: Add sunxi_get_ss_bonding_id() function   Hans de Goede
• [U-Boot] [PATCH 3/5] sun6i: dram: Do not try to initialize a second dram chan on A31s   Hans de Goede
• [U-Boot] [PATCH 4/5] sun6i: Drop some "unknown magic" from dram init   Hans de Goede
• [U-Boot] [PATCH 5/5] sun6i: Add new CSQ_CS908 board   Hans de Goede
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Ian Campbell
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [RFC PATCH] sf: New SF-NOR framework   Jagan Teki
• [U-Boot] [PATCH 2/2] spi: add common spi3 controller driver   Jagan Teki
• [U-Boot] [PATCH] get_maintainer.pl: fix source tree detection   Daniel Schwierzeck
• [U-Boot] [PATCH v3 0/1] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [PATCH v3] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] Booting non devicetree enabled kernels using u-boot build with CONFIG_OF_LIBFDT ?   Hans de Goede
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] please pull mpc85xx   Tom Rini
• [U-Boot] Pull request: u-boot-video/master   Tom Rini
• [U-Boot] [PATCH v2 01/17] dm: i2c: Move error reporting into a common function   Tom Rini
• [U-Boot] [PATCH v2 02/17] dm: core: Allow access to the device's driver_id data   Tom Rini
• [U-Boot] [PATCH v2 03/17] dm: core: Add functions to find parent and OF data   Tom Rini
• [U-Boot] [PATCH v2 04/17] dm: fdt: Correct handling of aliases with embedded digits   Tom Rini
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Tom Rini
• [U-Boot] [PATCH v2 09/17] dm: i2c: Implement driver model support in the i2c command   Tom Rini
• [U-Boot] [PATCH v2 10/17] dm: i2c: Add I2C emulation driver for sandbox   Tom Rini
• [U-Boot] [PATCH v2 11/17] dm: i2c: Add a sandbox I2C driver   Tom Rini
• [U-Boot] [PATCH v2 12/17] dm: i2c: Add an I2C EEPROM simulator   Tom Rini
• [U-Boot] [PATCH v2 13/17] dm: i2c: config: Enable I2C for sandbox using driver model   Tom Rini
• [U-Boot] [PATCH v2 14/17] dm: i2c: dts: Add an I2C bus for sandbox   Tom Rini
• [U-Boot] [PATCH v2 15/17] dm: Add a simple EEPROM driver   Tom Rini
• [U-Boot] [PATCH v2 16/17] dm: i2c: Add tests for I2C   Tom Rini
• [U-Boot] [PATCH 1/2] mx6slevk: Simplify the return value of setup_fec()   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6sxsabresd: Simplify the return value of setup_fec()   Fabio Estevam
• [U-Boot] [PATCH v3 07/14] dm: Allow device removal features to be dropped   Tom Rini
• [U-Boot] [PATCH] mx6sabresd: Add mx6sabresd_spl_defconfig to MAINTAINERS entry   Fabio Estevam
• [U-Boot] [PATCH v3 3/5] ls102xa: HYP/non-sec: support for ls102xa boards   Li.Xiubo at freescale.com
• [U-Boot] [PATCH 1/5] powerpc/b4860qds: add xfi support   Shaohui Xie
• [U-Boot] [PATCH 1/4] arm: rmobile: alt: Remove dram_init_banksize function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/4] arm: rmobile: koelsch: Remove dram_init_banksize function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/4] arm: rmobile: lager: Remove dram_init_banksize function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/4] arm: rmobile: gose: Remove dram_init_banksize function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] arm: rmobile: configs: Collect up common part of config for R-Car SoCs   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/2] arm: rmobile: replacement of common parts of config by rcar-gen2-common.h   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: Move SH_32BIT to Kconfig   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh/rmobile   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 04/17] dm: fdt: Correct handling of aliases with embedded digits   Simon Glass
• [U-Boot] [PATCH] ubi: reset relevant globals in ubi_exit()   Heiko Schocher
• [U-Boot] [PATCH 1/7] common/board_f: add setup of initial stack frame for MIPS   Simon Glass
• [U-Boot] [PATCH 2/7] common/board_f: fix gcc warning on MIPS64   Simon Glass
• [U-Boot] [PATCH v2 01/17] dm: i2c: Move error reporting into a common function   Heiko Schocher
• [U-Boot] [PATCH v2 02/17] dm: core: Allow access to the device's driver_id data   Heiko Schocher
• [U-Boot] [PATCH v2 03/17] dm: core: Add functions to find parent and OF data   Heiko Schocher
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Simon Glass
• [U-Boot] [PATCH v2 04/17] dm: fdt: Correct handling of aliases with embedded digits   Heiko Schocher
• [U-Boot] [PATCH v2 05/17] dm: Add a function to bind a device by driver name   Heiko Schocher
• [U-Boot] [PATCH v2 06/17] dm: spi: Correct handling of SPI chip selects in sandbox   Heiko Schocher
• [U-Boot] [PATCH v2 07/17] dm: spi: Use device_bind_driver() instead of our own function   Heiko Schocher
• [U-Boot] putc   Simon Glass
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Heiko Schocher
• [U-Boot] [PATCH v2 09/17] dm: i2c: Implement driver model support in the i2c command   Heiko Schocher
• [U-Boot] [PATCH v2 10/17] dm: i2c: Add I2C emulation driver for sandbox   Heiko Schocher
• [U-Boot] [PATCH v2 11/17] dm: i2c: Add a sandbox I2C driver   Heiko Schocher
• [U-Boot] [PATCH v2 12/17] dm: i2c: Add an I2C EEPROM simulator   Heiko Schocher
• [U-Boot] [PATCH v2 13/17] dm: i2c: config: Enable I2C for sandbox using driver model   Heiko Schocher
• [U-Boot] [PATCH v2 14/17] dm: i2c: dts: Add an I2C bus for sandbox   Heiko Schocher
• [U-Boot] [PATCH v2 15/17] dm: Add a simple EEPROM driver   Heiko Schocher
• [U-Boot] [PATCH v2 16/17] dm: i2c: Add tests for I2C   Heiko Schocher
• [U-Boot] [PATCH v2 17/17] dm: i2c: tegra: Convert to driver model   Heiko Schocher
• [U-Boot] [PATCH v2 0/17] dm: Add I2C support and convert sandbox, tegra   Heiko Schocher
• [U-Boot] sunxi: CPU disabling (was: Re: ARM: flush_dcache_all for PSCI)   Jan Kiszka
• [U-Boot] [PATCH 1/3 v2] blackfin: rename bfin-twi_i2c driver to adi_i2c   Heiko Schocher
• [U-Boot] [PATCH v2 0/17] dm: Add I2C support and convert sandbox, tegra   Simon Glass
• [U-Boot] [RFC] dm: tegra: boot time regression   Simon Glass
• [U-Boot] [PATCH 1/3 v2] blackfin: rename bfin-twi_i2c driver to adi_i2c   Sonic Zhang
• [U-Boot] Booting non devicetree enabled kernels using u-boot build with CONFIG_OF_LIBFDT ?   Simon Glass
• [U-Boot] [PATCH] get_maintainer.pl: fix source tree detection   Simon Glass
• [U-Boot] [PATCH] ot1200: fix card detect for usdhc4   Christian Gmeiner
• [U-Boot] [PATCH v8 1/3] exynos5: fix GPIO information of exynos5420   Simon Glass
• [U-Boot] [PATCH 1/5] arm: socfpga: dts: altr, rst-mgr.h: Move to SPDX license identifiers   Pavel Machek
• [U-Boot] [PATCH 2/5] arm: socfpga: Use only one clrbits_le32 call to deassert SPI reset bits   Pavel Machek
• [U-Boot] [PATCH 3/5] arm: socfpga: Add missing DW master SPI clock prototyp to clock_manager.h   Pavel Machek
• [U-Boot] [PATCH 4/5] spi: designware_spi: Some fixes / changes   Pavel Machek
• [U-Boot] [PATCH 5/5] arm: socfpga: DW_SPI: Remove clock info from config header   Pavel Machek
• [U-Boot] [PATCH 0/8] dm: core: abolish "u-boot, dm-pre-reloc" property and various refactorings   Masahiro Yamada
• [U-Boot] [PATCH 1/8] dm: core: a trivial clean up   Masahiro Yamada
• [U-Boot] [PATCH 2/8] dm: core: remove meaningless if conditional   Masahiro Yamada
• [U-Boot] [PATCH 3/8] dm: core: remove unnecessary return condition in driver lookup   Masahiro Yamada
• [U-Boot] [PATCH 4/8] dm: core: remove unnecessary return condition in uclass lookup   Masahiro Yamada
• [U-Boot] [PATCH 5/8] dm: core: refactor linker lists lookup code   Masahiro Yamada
• [U-Boot] [PATCH 6/8] dm: core: look up drivers more efficiently   Masahiro Yamada
• [U-Boot] [PATCH 7/8] dm: core: declare pre-reloc drivers with U_BOOT_DRIVER_F   Masahiro Yamada
• [U-Boot] [PATCH 8/8] dm: core: abolish u-boot, dm-pre-reloc property   Masahiro Yamada
• [U-Boot] [PATCH] usb: ehci: do not set the LSB of Current qTD pointer   Masahiro Yamada
• [U-Boot] [PATCH 1/8] dm: core: a trivial clean up   Simon Glass
• [U-Boot] [PATCH 2/8] dm: core: remove meaningless if conditional   Simon Glass
• [U-Boot] [PATCH 3/8] dm: core: remove unnecessary return condition in driver lookup   Simon Glass
• [U-Boot] [PATCH 4/8] dm: core: remove unnecessary return condition in uclass lookup   Simon Glass
• [U-Boot] [PATCH 5/8] dm: core: refactor linker lists lookup code   Simon Glass
• [U-Boot] [PATCH 6/8] dm: core: look up drivers more efficiently   Simon Glass
• [U-Boot] [PATCH 7/8] dm: core: declare pre-reloc drivers with U_BOOT_DRIVER_F   Simon Glass
• [U-Boot] [PATCH v3] sunxi: video: Add simplefb support   Grant Likely
• [U-Boot] [PATCH v8 1/3] exynos5: fix GPIO information of exynos5420   Przemyslaw Marczak
• [U-Boot] loadb problem. Hangs on START_CHAR   bomellberg
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Grant Likely
• [U-Boot] [PATCH v8 3/3] Odroid-XU3: Add documentation for Odroid-XU3   Przemyslaw Marczak
• [U-Boot] [PATCH v3 05/30] power: Add AMS AS3722 PMIC support   Thierry Reding
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Ian Campbell
• [U-Boot] [PATCH v3 30/30] net: rtl8169: Add support for RTL-8168/8111g   Thierry Reding
• [U-Boot] [PATCH v3 29/30] net: rtl8169: Use non-cached memory if available   Thierry Reding
• [U-Boot] [PATCH v3 01/30] vsprintf: Add modifier for phys_addr_t   Thierry Reding
• [U-Boot] [PATCH v8 2/3] Odroid-XU3: Add support for Odroid-XU3   Przemyslaw Marczak
• [U-Boot] exynos: please check compiler warning   Minkyu Kang
• [U-Boot] [RFC] How to get "#address-cells" in U-Boot?   Masahiro Yamada
• [U-Boot] [RFC] How to get "#address-cells" in U-Boot?   Masahiro Yamada
• [U-Boot] [RFC] How to get "#address-cells" in U-Boot?   Masahiro Yamada
• [U-Boot] [RFC] How to get "#address-cells" in U-Boot?   Masahiro Yamada
• [U-Boot] [PATCH 2/8] dm: core: remove meaningless if conditional   Masahiro Yamada
• [U-Boot] loadb problem. Hangs on START_CHAR   Wolfgang Denk
• [U-Boot] [PATCH 6/8] dm: core: look up drivers more efficiently   Masahiro Yamada
• [U-Boot] loadb problem. Hangs on START_CHAR   bomellberg
• [U-Boot] net: macb: write mac address when initialization   Andreas Bießmann
• [U-Boot] ARM: at91 series: convert to generic board   Andreas Bießmann
• [U-Boot] [U-Boot,1/2] ARM: atmel: spl: make initialization more stable   Andreas Bießmann
• [U-Boot] [U-Boot,2/2] ARM: atmel: spl: make css field configurable   Andreas Bießmann
• [U-Boot] arm, at91: generate boot.bin file for all atmel SoC   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 01/12] spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 02/12] arm, at91: add spi dataflash support for the taurus board   Andreas Bießmann
• [U-Boot] [U-Boot,v3,03/12] arm, at91, mpddrc: fix typo in ddr2_init()   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 04/12] arm, at91: compile mpddrc ram init code also for AT91SAM9M10G45   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 05/12] arm, at91: add missing ddr2 cr register MPDDRC_CR_EBISHARE define   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 06/12] spl, nand: add option to boot raw u-boot.bin image only   Andreas Bießmann
• [U-Boot] [U-Boot,v3,07/12] mtd: atmel_nand: add missing include   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 08/12] spl, nand, atmel_nand: add erase one block function   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 09/12] spl, mtd, nand, atmel_nand: invert device ready pin logic   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 11/12] arm, at91, spl: add spl support for the taurus board   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 12/12] arm, spl, at91: add spl support for the corvus board   Andreas Bießmann
• [U-Boot] [U-Boot,v4,1/3] mtd: atmel_nand: runtime to build gf table for pmecc   Andreas Bießmann
• [U-Boot] [U-Boot,v4,2/3] net: macb: enable GMAC IP without GE feature support   Andreas Bießmann
• [U-Boot] [U-Boot,v4,3/3] ARM: atmel: add sama5d4ek board support   Andreas Bießmann
• [U-Boot] [U-Boot,v2] ARM: atmel: add sama5d4 xplained ultra board support   Andreas Bießmann
• [U-Boot] [PATCH] imx:mx6sxsabresd fix pfuz probe failed   Stefano Babic
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master   Andreas Bießmann
• [U-Boot] loadb problem. Hangs on START_CHAR   Wolfgang Denk
• [U-Boot] loadb problem. Hangs on START_CHAR   bomellberg
• [U-Boot] loadb problem. Hangs on START_CHAR   Wolfgang Denk
• [U-Boot] [PATCH v6 2/4] mx6: thermal: Add i.MX6 CPU thermal sensor support   Stefano Babic
• [U-Boot] [PATCH v3 3/5] ls102xa: HYP/non-sec: support for ls102xa boards   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] mx6: Use a common SPL configuration file   Stefano Babic
• [U-Boot] loadb problem. Hangs on START_CHAR   bomellberg
• [U-Boot] loadb problem. Hangs on START_CHAR   Wolfgang Denk
• [U-Boot] loadb problem. Hangs on START_CHAR   Wolfgang Denk
• [U-Boot] [PATCH] ARM: OMAP5: DRA7xx: Enable I2C4 and I2C5 usage on the J6Eco EVM   Tom Rini
• [U-Boot] loadb problem. Hangs on START_CHAR   bomellberg
• [U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet   Minkyu Kang
• [U-Boot] [PATCH v3 2/3] arm: odroid: enable/disable usb host phy for exynos4412   Minkyu Kang
• [U-Boot] [PATCH v3 1/3] arm: odroid: pmic77686: allow buck voltage settings   Minkyu Kang
• [U-Boot] [PATCH] SMDK2410: convert to generic board   Minkyu Kang
• [U-Boot] [PATCH] exynos: dts: Correct USB vbus-gpio numbering for Snow   Minkyu Kang
• [U-Boot] [PATCH v3 0/3] exynos config updates   Minkyu Kang
• [U-Boot] [PATCH v4 0/7] Addition of new board Peach-Pi   Minkyu Kang
• [U-Boot] [PATCH] ARM: OMAP5: DRA7xx: Enable I2C4 and I2C5 usage on the J6Eco EVM   Lubomir Popov
• [U-Boot] [PATCH v3] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] Pull request: u-boot-sh/rmobile   Tom Rini
• [U-Boot] Pull request: u-boot-sh/master   Tom Rini
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master   Tom Rini
• [U-Boot] SPI flash ID patches   Ben Dooks
• [U-Boot] [PATCH 1/2] SPI: Add S25FL064A and S25FL116K flash information   Ben Dooks
• [U-Boot] [PATCH 2/2] SPI: Add S25FL164K flash identifier info   Ben Dooks
• [U-Boot] Booting non devicetree enabled kernels using u-boot build with CONFIG_OF_LIBFDT ?   Tom Rini
• [U-Boot] Booting non devicetree enabled kernels using u-boot build with CONFIG_OF_LIBFDT ?   Hans de Goede
• [U-Boot] [PATCH 5/6] sunxi: video: Add simplefb support   Grant Likely
• [U-Boot] [PATCH v4 0/2] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [PATCH v4 1/2] fdt_support: Add a fdt_setup_simplefb_node helper function   Hans de Goede
• [U-Boot] [PATCH v4 2/2] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] loadb problem. Hangs on START_CHAR   Wolfgang Denk
• [U-Boot] [PATCH 1/3] 85xx/b4860: Add alternate serdes protocols for B4860/B4420   York Sun
• [U-Boot] loadb problem. (was: Hangs on START_CHAR)   bomellberg
• [U-Boot] [PATCH 8/8] dm: core: abolish u-boot, dm-pre-reloc property   Simon Glass
• [U-Boot] [RFC] How to get "#address-cells" in U-Boot?   Simon Glass
• [U-Boot] [PATCH 2/8] dm: core: remove meaningless if conditional   Simon Glass
• [U-Boot] [PATCH 6/8] dm: core: look up drivers more efficiently   Simon Glass
• [U-Boot] [PATCH v3 05/30] power: Add AMS AS3722 PMIC support   Simon Glass
• [U-Boot] [PATCH v3 01/30] vsprintf: Add modifier for phys_addr_t   Simon Glass
• [U-Boot] [PATCH v2 04/17] dm: fdt: Correct handling of aliases with embedded digits   Tom Rini
• [U-Boot] [PATCH v4 1/2] fdt_support: Add a fdt_setup_simplefb_node helper function   Simon Glass
• [U-Boot] [PATCH v4 2/2] sunxi: video: Add simplefb support   Simon Glass
• [U-Boot] [PATCH 1/5] sun6i: Make dram clk and zq value Kconfig options   Ian Campbell
• [U-Boot] [PATCH 2/5] sun6i: Add sunxi_get_ss_bonding_id() function   Ian Campbell
• [U-Boot] [PATCH 3/5] sun6i: dram: Do not try to initialize a second dram chan on A31s   Ian Campbell
• [U-Boot] [PATCH 4/5] sun6i: Drop some "unknown magic" from dram init   Ian Campbell
• [U-Boot] [PATCH 5/5] sun6i: Add new CSQ_CS908 board   Ian Campbell
• [U-Boot] [PATCH v4 2/2] sunxi: video: Add simplefb support   Ian Campbell
• [U-Boot] [PATCH v8 0/6] fs: fat/ext4/sandbox - Deal with files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v8 1/6] sandbox: Use md5sum and fatwrite to enable testing of fs commands   Suriyan Ramasami
• [U-Boot] [PATCH v8 2/6] fat: Prepare API change for files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v8 3/6] ext4: Prepare API change for files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v8 4/6] sandbox: Prepare API change for files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v8 5/6] fs: API changes enabling extra parameter to return size of type loff_t   Suriyan Ramasami
• [U-Boot] [PATCH v8 6/6] sandbox: script for testing sandbox/ext4/fat/fs commands   Suriyan Ramasami
• [U-Boot] [PATCH v3 4/8] common: spl: Add interactive DDR debugger support for SPL image   York Sun
• [U-Boot] [PATCH v2] odroid: Turn blue LED on   Suriyan Ramasami
• [U-Boot] [PATCH 0/5] PL01x: baudrate & line control fixes   Vikas Manocha
• [U-Boot] [PATCH 1/5] serial: pl01x: pass pl01x_type to set baudrate   Vikas Manocha
• [U-Boot] [PATCH 2/5] serial: pl01x: fix pl011 baud rate configuration   Vikas Manocha
• [U-Boot] [PATCH 3/5] serial: pl01x: move all line control at same place   Vikas Manocha
• [U-Boot] [PATCH 4/5] serial: pl01x: disable as per type of pl01x   Vikas Manocha
• [U-Boot] [PATCH 5/5] serial: pl01x: avoid pl01x type check two times   Vikas Manocha
• [U-Boot] [PATCH] powerpc/t4240rdb: enable eSDHC 3.3V support   Xie Xiaobo
• [U-Boot] [PATCH v4 0/4] add support for new arch stv0991   Vikas Manocha
• [U-Boot] [PATCH v4 1/4] stv0991: Add basic stv0991 architecture support   Vikas Manocha
• [U-Boot] [PATCH v4 2/4] stv0991: enable ethernet support   Vikas Manocha
• [U-Boot] [PATCH v4 3/4] stv0991: default + misc command configs enabled   Vikas Manocha
• [U-Boot] [PATCH v4 4/4] stv0991: add maintainer information   Vikas Manocha
• [U-Boot] [PATCH v3 1/3] stv0991: Add basic stv0991 architecture support   Vikas MANOCHA
• [U-Boot] [PATCH v8 2/3] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH v3 3/5] ls102xa: HYP/non-sec: support for ls102xa boards   Li.Xiubo at freescale.com
• [U-Boot] [PATCH v8 1/3] exynos5: fix GPIO information of exynos5420   Hyungwon Hwang
• [U-Boot] [PATCH v8 3/3] Odroid-XU3: Add documentation for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH] powerpc/hydra: Update MDIO mux fixups   Chunhe Lan
• [U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet   Suriyan Ramasami
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Victor Ascroft
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Simon Glass
• [U-Boot] [PATCH] net: bootp: as CONFIG_BOOTP_SERVERIP is defined, keep bootfile not changed   Josh Wu
• [U-Boot] [PATCH v4 0/4] add support for new arch stv0991   Simon Glass
• [U-Boot] [PATCH] powerpc/mpc85xx: Update LIODN entries for T1040   Priyanka Jain
• [U-Boot] [PATCH 1/5] serial: pl01x: pass pl01x_type to set baudrate   Simon Glass
• [U-Boot] [PATCH 2/5] serial: pl01x: fix pl011 baud rate configuration   Simon Glass
• [U-Boot] [PATCH 3/5] serial: pl01x: move all line control at same place   Simon Glass
• [U-Boot] [PATCH 4/5] serial: pl01x: disable as per type of pl01x   Simon Glass
• [U-Boot] [PATCH 5/5] serial: pl01x: avoid pl01x type check two times   Simon Glass
• [U-Boot] [PATCH 0/5] PL01x: baudrate & line control fixes   Simon Glass
• [U-Boot] [PATCH] powerpc/t104x: Convert to use generic board code   Vijay Rai
• [U-Boot] [PATCH v3 4/8] common: spl: Add interactive DDR debugger support for SPL image   Albert ARIBAUD
• [U-Boot] [PATCH v3 3/5] ls102xa: HYP/non-sec: support for ls102xa boards   Albert ARIBAUD
• [U-Boot] [PATCH v4 1/4] stv0991: Add basic stv0991 architecture support   Albert ARIBAUD
• [U-Boot] [PATCH v4 3/4] stv0991: default + misc command configs enabled   Albert ARIBAUD
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of UBI   Heiko Schocher
• [U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet   Minkyu Kang
• [U-Boot] [PATCH v8 0/6] fs: fat/ext4/sandbox - Deal with files greater than 2GB   Pavel Machek
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of UBI   Stefan Roese
• [U-Boot] [PATCH v1 0/3] arm, at91: taurus board updates   Heiko Schocher
• [U-Boot] [PATCH v1 1/3] arm, arm926ejs: make thumb mode compileable   Heiko Schocher
• [U-Boot] [PATCH v1 2/3] arm, at91: enable thumb mode for taurus board in SPL   Heiko Schocher
• [U-Boot] [PATCH v1 3/3] taurus, spl: erase also spi flash if recovery button is pressed   Heiko Schocher
• [U-Boot] [SOLVED] loadb problem.   bomellberg
• [U-Boot] [PATCH 2/2] spi: add common spi3 controller driver   Scott Jiang
• [U-Boot] u-boot, fsl_espi.c driver   Joakim Tjernlund
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of UBI   Kyungmin Park
• [U-Boot] [PATCH 0/2] mxssb: trivial fixes   Marc Kleine-Budde
• [U-Boot] [PATCH 1/2] mxssb: Makefile: build with optimisation (-O2) by default   Marc Kleine-Budde
• [U-Boot] [PATCH 2/2] mxssb: fix uninitialized variables warnings   Marc Kleine-Budde
• [U-Boot] [PATCH] spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available   Guillaume GARDET
• [U-Boot] [PATCH v2] .travis.yml: build u-boot on travis-ci   Meier, Roger
• [U-Boot] [PATCH v1 0/3] arm, am335x: siemens board updates   Heiko Schocher
• [U-Boot] [PATCH v1 1/3] arm, am335x, siemens: fix factoryset interpretation   Heiko Schocher
• [U-Boot] [PATCH v1 2/3] arm, am335x, siemens: read COMP/ver from factoryset   Heiko Schocher
• [U-Boot] [PATCH v1 3/3] arm, am335x: siemens boards add FIT support   Heiko Schocher
• [U-Boot] [PATCH 1/2] arm, at91: corvus board updates   Heiko Schocher
• [U-Boot] [PATCH 2/2] arm, at91, axm: add SPL support for axm   Heiko Schocher
• [U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet   Przemyslaw Marczak
• [U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet   Przemyslaw Marczak
• [U-Boot] [PATCH v4 1/2] fdt_support: Add a fdt_setup_simplefb_node helper function   Hans de Goede
• [U-Boot] [PATCH v4 2/2] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [PATCH v2] odroid: Turn blue LED on   Przemyslaw Marczak
• [U-Boot] [PATCH 1/5] sun6i: Make dram clk and zq value Kconfig options   Hans de Goede
• [U-Boot] [PATCH v8 2/3] Odroid-XU3: Add support for Odroid-XU3   Przemyslaw Marczak
• [U-Boot] [PATCH v8 1/3] exynos5: fix GPIO information of exynos5420   Przemyslaw Marczak
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Stefan Agner
• [U-Boot] [RESEND PATCH 0/4] tqma6: improvements and cleanup   Markus Niebel
• [U-Boot] [PATCH 1/4] tqma6: (cosmetic) remove CONFIG_FLASH_SECTOR_SIZE   Markus Niebel
• [U-Boot] [PATCH 2/4] tqma6: add missing include   Markus Niebel
• [U-Boot] [PATCH 3/4] tqma6: add warning on failed setup_i2c   Markus Niebel
• [U-Boot] [PATCH 4/4] tqma6: use imx_ddr_size   Markus Niebel
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Masahiro Yamada
• [U-Boot] [PATCH 3/5] sun6i: dram: Do not try to initialize a second dram chan on A31s   Hans de Goede
• [U-Boot] [PATCH 0/2] mxssb: trivial fixes   Marek Vasut
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Heiko Schocher
• [U-Boot] [PATCH 5/5] sun6i: Add new CSQ_CS908 board   Hans de Goede
• [U-Boot] [PATCH 4/5] sun6i: Drop some "unknown magic" from dram init   Hans de Goede
• [U-Boot] [PATCH 8/8] dm: core: abolish u-boot, dm-pre-reloc property   Masahiro Yamada
• [U-Boot] [PATCH] bootz: fix silent console   Markus Niebel
• [U-Boot] [PATCH v2 0/7] Update gdsys board support   Dirk Eibach
• [U-Boot] [PATCH v2 0/7] Update gdsys board support   Stefan Roese
• [U-Boot] [PATCH] mx6sabresd: Access SRC_SBMR1 register via structure   Fabio Estevam
• [U-Boot] [PATCH v8 2/3] Odroid-XU3: Add support for Odroid-XU3   Przemyslaw Marczak
• [U-Boot] [PATCH 0/2] spl: MMC U-Boot image load from raw partition   Tom Rini
• [U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet   Minkyu Kang
• [U-Boot] [PATCH 1/5] sun6i: Make dram clk and zq value Kconfig options   Ian Campbell
• [U-Boot] [PATCH 3/5] sun6i: dram: Do not try to initialize a second dram chan on A31s   Ian Campbell
• [U-Boot] [PATCH 5/5] sun6i: Add new CSQ_CS908 board   Ian Campbell
• [U-Boot] [PATCH ] MMC: fix user capacity for partitioned eMMC card   Markus Niebel
• [U-Boot] [PATCH ] MMC: add MMC_VERSION_5_0   Markus Niebel
• [U-Boot] [PATCH v6 2/4] mx6: thermal: Add i.MX6 CPU thermal sensor support   Fabio Estevam
• [U-Boot] [PATCH] mcf: Fix cppcheck errors about uninitialized variables   Tom Rini
• [U-Boot] [PATCH v4 1/2] fdt_support: Add a fdt_setup_simplefb_node helper function   Simon Glass
• [U-Boot] [PATCH v4 2/2] sunxi: video: Add simplefb support   Simon Glass
• [U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet   Przemyslaw Marczak
• [U-Boot] [PATCH 8/8] dm: core: abolish u-boot, dm-pre-reloc property   Simon Glass
• [U-Boot] [PATCH v4 2/2] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [PATCH v4 2/2] sunxi: video: Add simplefb support   Simon Glass
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Stefan Agner
• [U-Boot] [PATCH v3 4/8] common: spl: Add interactive DDR debugger support for SPL image   York Sun
• [U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet   Suriyan Ramasami
• [U-Boot] [PATCH v4 1/4] stv0991: Add basic stv0991 architecture support   vikasm
• [U-Boot] [PATCH v4 3/4] stv0991: default + misc command configs enabled   vikasm
• [U-Boot] [PATCH v4 0/4] add support for new arch stv0991   vikasm
• [U-Boot] [PATCH] driver/ddr/fsl: Fix tMOD calculation for DDR3   York Sun
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Stefan Agner
• [U-Boot] [SOLVED] loadb problem.   Wolfgang Denk
• [U-Boot] [PATCH v5 0/3] add support for new arch stv0991   Vikas Manocha
• [U-Boot] [PATCH v5 1/3] stv0991: Add basic stv0991 architecture support   Vikas Manocha
• [U-Boot] [PATCH v5 2/3] stv0991: enable ethernet support   Vikas Manocha
• [U-Boot] [PATCH v5 3/3] stv0991: enable default and misc command configs   Vikas Manocha
• [U-Boot] [PATCH 0/5] PL01x: baudrate & line control fixes   vikasm
• [U-Boot] [PATCH] sunxi: gmac: Update bananapi fixup to the new CONFIG_TARGET_<BOARD> structure   Ian Campbell
• [U-Boot] [PATCH 0/2] spl: MMC U-Boot image load from raw partition   Albert ARIBAUD
• [U-Boot] [SOLVED] loadb problem.   bomellberg
• [U-Boot] u-boot, fsl_espi.c driver   Jagan Teki
• [U-Boot] [Patch v2] driver/ddr/fsl: Fix MRC_CYC calculation for DDR3   York Sun
• [U-Boot] [PATCH ] MMC: add MMC_VERSION_5_0   Jaehoon Chung
• [U-Boot] [PATCH] Freescale t104x: Do not exclude SGMII   York Sun
• [U-Boot] [PATCH v2 0/7] Update gdsys board support   Kim Phillips
• [U-Boot] [PATCH U-Boot] ARM: rpi_b: detect board revision   Stephen Warren
• [U-Boot] [PATCH v3] .travis.yml: build u-boot on travis-ci   Roger Meier
• [U-Boot] [PATCH v2 0/7] Update gdsys board support   Dirk Eibach
• [U-Boot] [PATCH v3] .travis.yml: build u-boot on travis-ci   Wolfgang Denk
• [U-Boot] [PATCH v3] .travis.yml: build u-boot on travis-ci   Wolfgang Denk
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] [PATCH] ubi: reset relevant globals in ubi_exit()   Heiko Schocher
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Wolfgang Denk
• [U-Boot] [PATCH v3 3/5] ls102xa: HYP/non-sec: support for ls102xa boards   Li.Xiubo at freescale.com
• [U-Boot] [PATCH v2 0/7] Update gdsys board support   Stefan Roese
• [U-Boot] [PATCH v2 1/7] board: dlvision: Reduce memory footprint   Stefan Roese
• [U-Boot] [PATCH v2 2/7] mtd: Handle 29LV800BT   Stefan Roese
• [U-Boot] [PATCH v2 3/7] common: Fix cmd_fpgad addressing   Stefan Roese
• [U-Boot] [PATCH v2 4/7] board: dlvision-10g: Compile fix   Stefan Roese
• [U-Boot] [PATCH v2 5/7] board: iocon: Fix fpga index in print_fpga_info()   Stefan Roese
• [U-Boot] [PATCH v2 6/7] board: iocon: Fix uninitialized access   Stefan Roese
• [U-Boot] [PATCH v2 7/7] mpc83xx: Add gdsys hrcon board   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH v2 02/17] dm: core: Allow access to the device's driver_id data   Masahiro Yamada
• [U-Boot] [PATCH v2 03/17] dm: core: Add functions to find parent and OF data   Masahiro Yamada
• [U-Boot] [PATCH v2 0/17] dm: Add I2C support and convert sandbox, tegra   Masahiro Yamada
• [U-Boot] [PATCH v2 14/17] dm: i2c: dts: Add an I2C bus for sandbox   Masahiro Yamada
• [U-Boot] [PATCH 1/3] powerpc: mpc52xx: a4m072: Convert to generic board   Stefan Roese
• [U-Boot] [PATCH 2/3] powerpc: mpc52xx: a3m071/a4m2k: Convert to generic board   Stefan Roese
• [U-Boot] [PATCH 3/3] powerpc: mpc52xx: Clear GD in the main U-Boot stage for SPL usage   Stefan Roese
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Masahiro Yamada
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Masahiro Yamada
• [U-Boot] [PATCH v6 2/4] mx6: thermal: Add i.MX6 CPU thermal sensor support   Stefano Babic
• [U-Boot] [PATCH 8/8] dm: core: abolish u-boot, dm-pre-reloc property   Masahiro Yamada
• [U-Boot] [PATCH] mpc85xx/sleep: flush cache after restoring DDR data   b29983 at freescale.com
• [U-Boot] [PATCH v2 02/17] dm: core: Allow access to the device's driver_id data   Simon Glass
• [U-Boot] [PATCH v2 03/17] dm: core: Add functions to find parent and OF data   Simon Glass
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Simon Glass
• [U-Boot] [PATCH v2 14/17] dm: i2c: dts: Add an I2C bus for sandbox   Simon Glass
• [U-Boot] [PATCH 0/6] ARM: at91: SAMA5: extract the common sama5 chip configurations to a common header   Josh Wu
• [U-Boot] [PATCH 1/6] ARM: at91: sama5d3_xplained: spl: enable PMECC header generation   Josh Wu
• [U-Boot] [PATCH 2/6] ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h   Josh Wu
• [U-Boot] [PATCH 3/6] ARM: at91: sama5d3_xplained: set ENV_FAT_DEVICE_AND_PART intead of using number   Josh Wu
• [U-Boot] [PATCH 4/6] ARM: at91: sama5d3: mmc: save enviroment as a fat file (uboot.env)   Josh Wu
• [U-Boot] [PATCH 5/6] ARM: at91: sama5: move the bootcmd definition to the common header   Josh Wu
• [U-Boot] [PATCH 6/6] ARM: at91: at91sam9x5: mmc: save environment as a file in FAT partition.   Josh Wu
• [U-Boot] m68k maintenance   Angelo Dureghello
• [U-Boot] [PATCH 1/3] powerpc: mpc52xx: a4m072: Convert to generic board   Wolfgang Denk
• [U-Boot] [PATCH 2/3] powerpc: mpc52xx: a3m071/a4m2k: Convert to generic board   Wolfgang Denk
• [U-Boot] [PATCH 3/3] powerpc: mpc52xx: Clear GD in the main U-Boot stage for SPL usage   Wolfgang Denk
• [U-Boot] powerpc: mpc52xx: PULL REQUEST   Wolfgang Denk
• [U-Boot] [SOLVED] loadb problem.   Wolfgang Denk
• [U-Boot] [PATCH v2 0/17] dm: Add I2C support and convert sandbox, tegra   Heiko Schocher
• [U-Boot] [PATCH v5 0/3] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [PATCH v5 1/3] fdt_support: Add a fdt_setup_simplefb_node helper function   Hans de Goede
• [U-Boot] [PATCH v5 2/3] common/lcd: Make lcd_dt_simplefb_configure_node use fdt_setup_simplefb_node   Hans de Goede
• [U-Boot] [PATCH v5 3/3] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [PATCH 1/5] sun6i: Make dram clk and zq value Kconfig options   Hans de Goede
• [U-Boot] [PATCH 5/5] sun6i: Add new CSQ_CS908 board   Hans de Goede
• [U-Boot] [PATCH v6 2/4] mx6: thermal: Add i.MX6 CPU thermal sensor support   Otavio Salvador
• [U-Boot] [PATCH] arm: make arch memset/memcpy to work with Thumb2 builds   Stefan Agner
• [U-Boot] [PATCH v4] .travis.yml: build u-boot on travis-ci   Roger Meier
• [U-Boot] [PATCH] arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)   Stefan Roese
• [U-Boot] [PATCH] cmd_fuse: return CMD_RET_FAILURE on error   Hector Palacios
• [U-Boot] [PATCH v1 1/2] odroid: Update README with USB host information   Suriyan Ramasami
• [U-Boot] [PATCH v1 2/2] odroid: usbhost - Add missing gpio_request call   Suriyan Ramasami
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Bill Pringlemeir
• [U-Boot] [PATCH 0/3] dm: display devices in a tree-like format for easy debug   Masahiro Yamada
• [U-Boot] [PATCH 1/3] lib: string: move strlcpy() to a common place   Masahiro Yamada
• [U-Boot] [PATCH 2/3] dm: add a command to list devices in a tree-like format   Masahiro Yamada
• [U-Boot] [PATCH 3/3] sandbox: enable showdev command   Masahiro Yamada
• [U-Boot] [PATCH 1/7] common/board_f: add setup of initial stack frame for MIPS   Daniel Schwierzeck
• [U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet   Przemyslaw Marczak
• [U-Boot] [PATCH v1 1/2] odroid: Update README with USB host information   Przemyslaw Marczak
• [U-Boot] [PATCH v1 2/2] odroid: usbhost - Add missing gpio_request call   Przemyslaw Marczak
• [U-Boot] [PATCH U-Boot] ARM: rpi_b: detect board revision   Stephen Warren
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] u-boot, fsl_espi.c driver   Joakim Tjernlund
• [U-Boot] [PATCH U-Boot] ARM: rpi_b: detect board revision   Matthias Klein
• [U-Boot] [PATCH v1 1/2] odroid: Update README with USB host information   Suriyan Ramasami
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Bill Pringlemeir
• [U-Boot] [PATCH v1 1/2] odroid: Update README with USB host information   Przemyslaw Marczak
• [U-Boot] [PATCH v1 1/2] odroid: Update README with USB host information   Suriyan Ramasami
• [U-Boot] [PATCH] git-mailrc: fix mips alias   Daniel Schwierzeck
• [U-Boot] [PATCH v1 1/2] odroid: Update README with USB host information   Przemyslaw Marczak
• [U-Boot] [RFC PATCH] Kbuild: introduce Makefile in arch/$ARCH/   Daniel Schwierzeck
• [U-Boot] [RFC Patch 1/2] powerpc: Move fsl_errata.h out of arch/powerpc   York Sun
• [U-Boot] [RFC Patch 2/2] driver/usb/fsl: Make FSL USB driver common   York Sun
• [U-Boot] [PATCH v5 0/3] sunxi: video: Add simplefb support   Simon Glass
• [U-Boot] [PATCH 1/7] common/board_f: add setup of initial stack frame for MIPS   Simon Glass
• [U-Boot] [PATCH] usb: ehci: do not set the LSB of Current qTD pointer   Marek Vasut
• [U-Boot] [PATCH 1/5] arm: socfpga: dts: altr, rst-mgr.h: Move to SPDX license identifiers   Marek Vasut
• [U-Boot] [PATCH] cmd_fuse: return CMD_RET_FAILURE on error   Benoît Thébaudeau
• [U-Boot] [PATCH 0/6] ARM: at91: SAMA5: extract the common sama5 chip configurations to a common header   Bo Shen
• [U-Boot] [PATCH 1/6] ARM: at91: sama5d3_xplained: spl: enable PMECC header generation   Bo Shen
• [U-Boot] [PATCH 0/6] ARM: at91: SAMA5: extract the common sama5 chip configurations to a common header   Josh Wu
• [U-Boot] [PATCH 0/6] ARM: at91: SAMA5: extract the common sama5 chip configurations to a common header   Bo Shen
• [U-Boot] [PATCH 1/2] ARM: rpi: rename rpi_b to rpi   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: rpi: support an environment   Stephen Warren
• [U-Boot] [PATCH v5 1/3] fdt_support: Add a fdt_setup_simplefb_node helper function   Stephen Warren
• [U-Boot] [RFC Patch 1/2] powerpc: Move fsl_errata.h out of arch/powerpc   Prabhakar Kushwaha
• [U-Boot] CTRL-C hangs after "hush: fix segfault on syntax error"   Stephen Warren
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Masahiro Yamada
• [U-Boot] [PATCH v2 02/17] dm: core: Allow access to the device's driver_id data   Masahiro Yamada
• [U-Boot] [PATCH 1/5] arm: socfpga: dts: altr, rst-mgr.h: Move to SPDX license identifiers   Stefan Roese
• [U-Boot] [PATCH] imx: mx53loco: Add raw initrd support   Guillaume GARDET
• [U-Boot] [PATCH] imx: mx53loco: Add raw initrd support   Hui.Liu at freescale.com
• [U-Boot] [PATCH 1/4] x86: Call cpu_init_interrupts() from interrupt_init()   Bin Meng
• [U-Boot] [PATCH 2/4] x86: Remove cpu_init_r() for x86   Bin Meng
• [U-Boot] [PATCH 3/4] x86: Refactor interrupt_init()   Bin Meng
• [U-Boot] [PATCH 4/4] x86: Remove unnecessary call to initr_enable_interrupts()   Bin Meng
• [U-Boot] [PATCH] arm: exynos: fix the div value for set_mmc_clk   Jaehoon Chung
• [U-Boot] m68k maintenance   Jason.Jin at freescale.com
• [U-Boot] [PATCH v2] cmd_fuse: return CMD_RET_FAILURE on error   Hector Palacios
• [U-Boot] [PATCH v1 0/9] Add full DDR init for Marvell Armada-XP MV78xx0 (AXP)   Stefan Roese
• [U-Boot] [PATCH v1 2/2] odroid: usbhost - Add missing gpio_request call   Minkyu Kang
• [U-Boot] [PATCH] arm: make arch memset/memcpy to work with Thumb2 builds   Jeroen Hofstee
• [U-Boot] [PATCH v5 3/3] sunxi: video: Add simplefb support   Ian Campbell
• [U-Boot] [PATCH v2 3/4] novena: Move the DCD settings to spl code   Stefano Babic
• [U-Boot] [PATCH v4] ARM: mxs: tools: Add support for boot progress display flag   Stefano Babic
• [U-Boot] [PATCH] imx:mx6sxsabresd fix pfuz probe failed   Stefano Babic
• [U-Boot] [PATCH] imx: mx6slevk: Change default mmcdev to USDHC2 device   Stefano Babic
• [U-Boot] [PATCH v3 2/2] imx: fix exception vectors relocation in imx27   Stefano Babic
• [U-Boot] [PATCH v2 1/4] mx6sabresd: Move the DCD settings to spl code   Stefano Babic
• [U-Boot] [PATCH v2 2/4] gw_ventana: Move the DCD settings to spl code   Stefano Babic
• [U-Boot] [PATCH v2 3/4] novena: Move the DCD settings to spl code   Stefano Babic
• [U-Boot] [PATCH v2 4/4] mx6: Use a common SPL configuration file   Stefano Babic
• [U-Boot] [PATCH 1/3] imx: consolidate set_chipselect_size function   Stefano Babic
• [U-Boot] [PATCH 2/3] mx6: add weim registers   Stefano Babic
• [U-Boot] [PATCH 3/3] mx6qsabreauto: Add parallel NOR flash support   Stefano Babic
• [U-Boot] [PATCH] tools/msximage.c: fix warning about nptr possibly uninitialized   Stefano Babic
• [U-Boot] [PATCH 1/2] wandboard: Fix error handling in board_mmc_init()   Stefano Babic
• [U-Boot] [PATCH 2/2] mx53loco: Fix error handling in board_mmc_init()   Stefano Babic
• [U-Boot] [PATCH] mx6sabresd: State that only mx6q is supported in SPL   Stefano Babic
• [U-Boot] [PATCH 1/4] tqma6: (cosmetic) remove CONFIG_FLASH_SECTOR_SIZE   Stefano Babic
• [U-Boot] [PATCH 2/4] tqma6: add missing include   Stefano Babic
• [U-Boot] [PATCH 3/4] tqma6: add warning on failed setup_i2c   Stefano Babic
• [U-Boot] [PATCH 4/4] tqma6: use imx_ddr_size   Stefano Babic
• [U-Boot] [PATCH] mx6sabresd: Access SRC_SBMR1 register via structure   Stefano Babic
• [U-Boot] [PATCH] scripts/Makefile.lib: Make __dtb_dt_begin align on a 4 byte boundary   Bin Meng
• [U-Boot] [PATCH v4 3/3] ARM: atmel: add sama5d4ek board support   Masahiro Yamada
• [U-Boot] [PATCH v3 1/2] mmc: fsl_esdhc: Update esdhc driver for iMX6SX   Stefano Babic
• [U-Boot] [PATCH v3 2/2] imx: mx6sxsabresd: Add board support for USDHC2 and USDHC3   Stefano Babic
• [U-Boot] [PATCH v4 3/3] ARM: atmel: add sama5d4ek board support   Bo Shen
• [U-Boot] [PATCH v3 5/5] imx: imx6q/dlsabreauto: Add PMIC Pfuze100 support   Stefano Babic
• [U-Boot] [PATCH v3 4/5] imx: mx6sxsabresd: Use the pfuze common init function   Stefano Babic
• [U-Boot] [PATCH v3 3/5] imx: mx6sabresd: Use the pfuze common init function   Stefano Babic
• [U-Boot] [PATCH v3 1/5] power: pfuze100: Update definitions for buck regulators   Stefano Babic
• [U-Boot] [PATCH v3 2/5] imx: mx6sabre common: Factorize the Pfuze init function   Stefano Babic
• [U-Boot] [PATCH] scripts/Makefile.lib: Make __dtb_dt_begin align on a 4 byte boundary   Masahiro Yamada
• [U-Boot] [PATCH] powerpc/mpc85xx: use correct dma compatible for several SoCs   Laurentiu Tudor
• [U-Boot] [PATCH] scripts/Makefile.lib: Make __dtb_dt_begin align on a 4 byte boundary   Bin Meng
• [U-Boot] [PATCH 1/3] arm: semihosting: staticize internal functions   Linus Walleij
• [U-Boot] [PATCH 2/3] arm: semihosting: fix up compile bugs   Linus Walleij
• [U-Boot] [PATCH 3/3] arm: semihosting: get rid of forward declarations   Linus Walleij
• [U-Boot] [RFC] dm: tegra: boot time regression   Marcel Ziswiler
• [U-Boot] Linker errors with SPL and FAT   Andy Pont
• [U-Boot] [PATCH] tbs2910: Fix error handling in board_mmc_init()   Soeren Moch
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] [PATCH v3 3/5] ls102xa: HYP/non-sec: support for ls102xa boards   Albert ARIBAUD
• [U-Boot] [PATCH v8 2/3] Odroid-XU3: Add support for Odroid-XU3   Jaehoon Chung
• [U-Boot] [PATCH v3 2/2] imx: fix exception vectors relocation in imx27   Albert ARIBAUD
• [U-Boot] [PATCH] arm: make arch memset/memcpy to work with Thumb2 builds   Stefan Agner
• [U-Boot] [PATCH v2 0/3] dm: display devices in a tree-like format for easy debug   Masahiro Yamada
• [U-Boot] [PATCH v2 1/3] lib: string: move strlcpy() to a common place   Masahiro Yamada
• [U-Boot] [PATCH v2 2/3] dm: add a command to list devices in a tree-like format   Masahiro Yamada
• [U-Boot] [PATCH v2 3/3] sandbox: enable showdev command   Masahiro Yamada
• [U-Boot] [PATCH] arm: make arch memset/memcpy to work with Thumb2 builds   Jeroen Hofstee
• [U-Boot] [PATCH v7 0/4] add i.MX6 thermal sensor driver   Ye.Li
• [U-Boot] [PATCH v7 1/4] mx6: clock: Add thermal clock enable function   Ye.Li
• [U-Boot] [PATCH v7 2/4] DM: thermal: Add imx thermal DM driver   Ye.Li
• [U-Boot] [PATCH v7 3/4] mx6: thermal: Check cpu temperature via thermal sensor   Ye.Li
• [U-Boot] [PATCH v7 4/4] mx6: mx6sabre common: Enable i.MX thermal DM driver   Ye.Li
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Simon Glass
• [U-Boot] [PATCH v5 3/3] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] [i2c] Pull request   Tom Rini
• [U-Boot] [ubi] Pull request   Tom Rini
• [U-Boot] Please pull u-boot-ppc4xx/master   Tom Rini
• [U-Boot] powerpc: mpc52xx: PULL REQUEST   Tom Rini
• [U-Boot] [PATCH v2 1/3] lib: string: move strlcpy() to a common place   Simon Glass
• [U-Boot] [PATCH v2 4/4] sunxi: Add usb keyboard Kconfig option   Ian Campbell
• [U-Boot] [PATCH v5 0/3] ARM: Add armv7/Kconfig and allow booting in secure mode on non-secure boot capable systems   Hans de Goede
• [U-Boot] [PATCH v2 04/11] fdt: Add device tree memory bindings   Tom Rini
• [U-Boot] [PATCH v2 2/3] dm: add a command to list devices in a tree-like format   Simon Glass
• [U-Boot] [PATCH v1 2/2] odroid: usbhost - Add missing gpio_request call   Suriyan Ramasami
• [U-Boot] BUG: bootz/bootm command mandates a fdt blob   Suriyan Ramasami
• [U-Boot] [PATCH] gw_ventana: Use the generic spl_sd.cfg   Fabio Estevam
• [U-Boot] [PATCH] arm: make arch memset/memcpy to work with Thumb2 builds   Bill Pringlemeir
• [U-Boot] [PATCH v7 2/4] DM: thermal: Add imx thermal DM driver   Stefano Babic
• [U-Boot] [PATCH] tbs2910: Fix error handling in board_mmc_init()   Stefano Babic
• [U-Boot] m68k maintenance   Tom Rini
• [U-Boot] [PATCH v5 1/3] Kconfig: Add EXPERT option   Tom Rini
• [U-Boot] [PATCH] arm: make arch memset/memcpy to work with Thumb2 builds   Jeroen Hofstee
• [U-Boot] BUG: bootz/bootm command mandates a fdt blob   Hans de Goede
• [U-Boot] [PATCH 0/5] cleanup and refactor lcd.c   Nikita Kiryanov
• [U-Boot] [PATCH 1/5] lcd: remove CONFIG_SYS_INVERT_COLORS   Nikita Kiryanov
• [U-Boot] [PATCH 2/5] lcd: cleanup lcd_drawchars   Nikita Kiryanov
• [U-Boot] [PATCH 3/5] mpc8xx_lcd: get rid of CONFIG_EDT32F10   Nikita Kiryanov
• [U-Boot] [PATCH 4/5] lcd: remove LCD_MONOCHROME   Nikita Kiryanov
• [U-Boot] [PATCH 5/5] lcd: refactor lcd console stuff into its own file   Nikita Kiryanov
• [U-Boot] CTRL-C hangs after "hush: fix segfault on syntax error"   Przemyslaw Marczak
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Bill Pringlemeir
• [U-Boot] BUG: bootz/bootm command mandates a fdt blob   Simon Glass
• [U-Boot] [PATCH 8/8] dm: core: abolish u-boot, dm-pre-reloc property   Simon Glass
• [U-Boot] USB Host not enumerating properly on AM335x-based board   Maxime Ripard
• [U-Boot] CTRL-C hangs after "hush: fix segfault on syntax error"   Simon Glass
• [U-Boot] [PATCH 1/7] common/board_f: add setup of initial stack frame for MIPS   Daniel Schwierzeck
• [U-Boot] [PATCH 8/8] dm: core: abolish u-boot, dm-pre-reloc property   Stephen Warren
• [U-Boot] [PATCH 1/7] common/board_f: add setup of initial stack frame for MIPS   Simon Glass
• [U-Boot] [PATCH v2 0/17] dm: Add I2C support and convert sandbox, tegra   Simon Glass
• [U-Boot] [PATCH v5 3/3] sunxi: video: Add simplefb support   Simon Glass
• [U-Boot] [PATCH v2 04/11] fdt: Add device tree memory bindings   Simon Glass
• [U-Boot] [PATCH v5 1/3] fdt_support: Add a fdt_setup_simplefb_node helper function   Simon Glass
• [U-Boot] [PATCH v5 2/3] common/lcd: Make lcd_dt_simplefb_configure_node use fdt_setup_simplefb_node   Simon Glass
• [U-Boot] [RFC Patch 1/2] powerpc: Move fsl_errata.h out of arch/powerpc   York Sun
• [U-Boot] [PATCH] arm: make arch memset/memcpy to work with Thumb2 builds   Bill Pringlemeir
• [U-Boot] [PATCH 1/5] lcd: remove CONFIG_SYS_INVERT_COLORS   Simon Glass
• [U-Boot] [PATCH 2/5] lcd: cleanup lcd_drawchars   Simon Glass
• [U-Boot] [PATCH 3/5] mpc8xx_lcd: get rid of CONFIG_EDT32F10   Simon Glass
• [U-Boot] [PATCH 4/5] lcd: remove LCD_MONOCHROME   Simon Glass
• [U-Boot] [PATCH 1/5] mx51evk: Fix error handling in board_mmc_init()   Fabio Estevam
• [U-Boot] [PATCH 2/5] mx6qarm2: Fix error handling in board_mmc_init()   Fabio Estevam
• [U-Boot] [PATCH 3/5] mx53smd: Fix error handling in board_mmc_init()   Fabio Estevam
• [U-Boot] [PATCH 4/5] mx53evk: Fix error handling in board_mmc_init()   Fabio Estevam
• [U-Boot] [PATCH 5/5] mx53ard: Fix error handling in board_mmc_init()   Fabio Estevam
• [U-Boot] [PATCH 5/5] lcd: refactor lcd console stuff into its own file   Simon Glass
• [U-Boot] [PATCH v2 02/17] dm: core: Allow access to the device's driver_id data   Simon Glass
• [U-Boot] help on using buildman   York Sun
• [U-Boot] [RFC] dm: tegra: boot time regression   Simon Glass
• [U-Boot] buildman with distcc   Simon Glass
• [U-Boot] [PATCH] config_distro_bootcmd: Avoid scanning usb twice (under some circumstances)   Hans de Goede
• [U-Boot] help on using buildman   Simon Glass
• [U-Boot] [PATCH] arm: make arch memset/memcpy to work with Thumb2 builds   Jeroen Hofstee
• [U-Boot] [PATCH] bootz: fix silent console   Simon Glass
• [U-Boot] help on using buildman   York Sun
• [U-Boot] [PATCH v2] cmd_fuse: return CMD_RET_FAILURE on error   Benoît Thébaudeau
• [U-Boot] [PATCH v5 1/3] fdt_support: Add a fdt_setup_simplefb_node helper function   Hans de Goede
• [U-Boot] BUG: bootz/bootm command mandates a fdt blob   Suriyan Ramasami
• [U-Boot] help on using buildman   York Sun
• [U-Boot] BUG: bootz/bootm command mandates a fdt blob   Hans de Goede
• [U-Boot] help on using buildman   Simon Glass
• [U-Boot] m68k maintenance   Wolfgang Denk
• [U-Boot] help on using buildman   York Sun
• [U-Boot] [PATCH v5 3/3] sunxi: video: Add simplefb support   Hans de Goede
• [U-Boot] help on using buildman   Simon Glass
• [U-Boot] help on using buildman   York Sun
• [U-Boot] Please pull u-boot-sunxi/master into master   Hans de Goede
• [U-Boot] help on using buildman   York Sun
• [U-Boot] help on using buildman   York Sun
• [U-Boot] help on using buildman   York Sun
• [U-Boot] help on using buildman   Simon Glass
• [U-Boot] help on using buildman   York Sun
• [U-Boot] help on using buildman   York Sun
• [U-Boot] [PATCH v1] fdt: Allow non-FDT kernels to boot when CONFIG_OF_LIBFDT is defined   Suriyan Ramasami
• [U-Boot] [PATCH v2 1/2] odroid: Update README with USB host usage   Suriyan Ramasami
• [U-Boot] [PATCH v2 2/2] odroid: usbhost - Add missing gpio_request call   Suriyan Ramasami
• [U-Boot] [PATCH v3 3/5] ls102xa: HYP/non-sec: support for ls102xa boards   Li.Xiubo at freescale.com
• [U-Boot] [PATCH] sh: Move SH_32BIT to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH] powerpc: mpc8xx: remove hermes board support   Masahiro Yamada
• [U-Boot] [PATCH v2] powerpc: mpc8xx: remove hermes board support   Masahiro Yamada
• [U-Boot] [PATCH 0/3] Remove redundant CONFIG_SPL_START_S_PATH   Masahiro Yamada
• [U-Boot] [PATCH 1/3] powerpc: lwmon5: remove redundant CONFIG_SPL_* defines   Masahiro Yamada
• [U-Boot] [PATCH 2/3] powerpc: a3m071: remove redundant CONFIG_SPL_* defines   Masahiro Yamada
• [U-Boot] [PATCH 3/3] imx6: remove redudant CONFIG_SPL_START_S_PATH define   Masahiro Yamada
• [U-Boot] [PATCH] fsl/sleep: updated the deep sleep framework for QorIQ platforms   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH] mpc85xx/t104xrdb: convert deep sleep to generic board interface   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH v2 01/11] fdt: Allow ft_board_setup() to report failure   Simon Glass
• [U-Boot] [PATCH v2 02/11] fdt: Report failure of ft_board_setup()   Simon Glass
• [U-Boot] [PATCH v2 03/11] fdt: Export the fdt_find_or_add_subnode() function   Simon Glass
• [U-Boot] [PATCH v2 05/11] fdt: Use the correct return types for fdtdec_decode_region()   Simon Glass
• [U-Boot] [PATCH v2 06/11] fdt: Enhance flashmap function to deal with region properties   Simon Glass
• [U-Boot] [PATCH v2 07/11] fdt: Tidy up error handling in image_setup_libfdt()   Simon Glass
• [U-Boot] [PATCH v2 08/11] fdt: Add ft_system_setup() function for system device tree additions   Simon Glass
• [U-Boot] [PATCH v2 09/11] fdt: Change fdt_pack_reg() to static and fix types   Simon Glass
• [U-Boot] [PATCH v2 10/11] fdt: Add a function to decode a named memory region   Simon Glass
• [U-Boot] [PATCH v2 11/11] fdt: Try to use fdt_address_cells()/fdt_size_cells()   Simon Glass
• [U-Boot] [RFC PATCH] Kbuild: introduce Makefile in arch/$ARCH/   Masahiro Yamada
• [U-Boot] help on using buildman   Simon Glass
• [U-Boot] help on using buildman   Masahiro Yamada
• [U-Boot] Please pull u-boot-fdt.git   Simon Glass
• [U-Boot] help on using buildman   Masahiro Yamada
• [U-Boot] help on using buildman   York Sun
• [U-Boot] [PATCH v2] powerpc: mpc8xx: remove hermes board support   Wolfgang Denk
• [U-Boot] help on using buildman   Masahiro Yamada
• [U-Boot] [PATCH] arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)   Heiko Schocher
• [U-Boot] help on using buildman   York Sun
• [U-Boot] [PATCH v3 01/26] x86: Allow timer calibration to work on ivybridge   Simon Glass
• [U-Boot] [PATCH v3 02/26] x86: Drop old CONFIG_INTEL_CORE_ARCH code   Simon Glass
• [U-Boot] [PATCH v3 03/26] x96: ifdtool: Allow creation of an empty ROM   Simon Glass
• [U-Boot] [PATCH v3 04/26] x86: Add chromebook_link board   Simon Glass
• [U-Boot] [PATCH v3 05/26] x86: Build a .rom file which can be flashed to an x86 machine   Simon Glass
• [U-Boot] [PATCH v3 06/26] x86: Emit post codes in startup code for Chromebooks   Simon Glass
• [U-Boot] [PATCH v3 07/26] x86: chromebook_link: Implement CAR support (cache as RAM)   Simon Glass
• [U-Boot] [PATCH v3 08/26] x86: Refactor PCI to permit alternate init   Simon Glass
• [U-Boot] [PATCH v3 09/26] x86: Support use of PCI before relocation   Simon Glass
• [U-Boot] [PATCH v3 10/26] x86: ivybridge: Enable PCI in early init   Simon Glass
• [U-Boot] [PATCH v3 11/26] x86: pci: Allow configuration before relocation   Simon Glass
• [U-Boot] [PATCH v3 12/26] x86: ivybridge: Add early LPC init so that serial works   Simon Glass
• [U-Boot] [PATCH v3 13/26] x86: Tidy up coreboot header usage   Simon Glass
• [U-Boot] [PATCH v3 14/26] x86: Add clr/setbits functions   Simon Glass
• [U-Boot] [PATCH v3 15/26] x86: Add msr read/write functions that use a structure   Simon Glass
• [U-Boot] [PATCH v3 16/26] x86: ivybridge: Perform initial CPU setup   Simon Glass
• [U-Boot] [PATCH v3 17/26] x86: ivybridge: Check BIST value on boot   Simon Glass
• [U-Boot] [PATCH v3 18/26] x86: ivybridge: Perform Intel microcode update on boot   Simon Glass
• [U-Boot] [PATCH v3 19/26] x86: dts: Add microcode updates for ivybridge CPU   Simon Glass
• [U-Boot] [PATCH v3 20/26] x86: ivybridge: Add early init for PCH devices   Simon Glass
• [U-Boot] [PATCH v3 21/26] x86: ivybridge: Add support for early GPIO init   Simon Glass
• [U-Boot] [PATCH v3 22/26] x86: chromebook_link: Enable GPIO support   Simon Glass
• [U-Boot] [PATCH v3 23/26] x86: Make show_boot_progress() common   Simon Glass
• [U-Boot] [PATCH v3 24/26] x86: ivybridge: Add LAPIC support   Simon Glass
• [U-Boot] [PATCH v3 25/26] x86: ivybridge: Implement SDRAM init   Simon Glass
• [U-Boot] [PATCH v3 26/26] x86: Rename chromebook-x86 to coreboot   Simon Glass
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] [PATCH v2 2/3] dm: add a command to list devices in a tree-like format   Masahiro Yamada
• [U-Boot] Please pull u-boot-x86.git   Masahiro Yamada
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Heiko Schocher
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] [PATCH v2 2/3] dm: add a command to list devices in a tree-like format   Simon Glass
• [U-Boot] [PATCH v2 0/17] dm: Add I2C support and convert sandbox, tegra   Heiko Schocher
• [U-Boot] [PATCH v2 1/2] odroid: Update README with USB host usage   Przemyslaw Marczak
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Masahiro Yamada
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Masahiro Yamada
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Lukasz Majewski
• [U-Boot] [PATCH 1/3] powerpc: lwmon5: remove redundant CONFIG_SPL_* defines   Stefan Roese
• [U-Boot] [PATCH 2/3] powerpc: a3m071: remove redundant CONFIG_SPL_* defines   Stefan Roese
• [U-Boot] Please pull u-boot-x86.git   Masahiro Yamada
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Thomas Petazzoni
• [U-Boot] [PATCH v1] fdt: Allow non-FDT kernels to boot when CONFIG_OF_LIBFDT is defined   Heiko Schocher
• [U-Boot] [PATCH v3 1/2] cosmetic: arm: fix whitespace in arch/arm/lib/relocate.S   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/2] cosmetic: arm: fix whitespace in arch/arm/lib/relocate.S   Albert ARIBAUD
• [U-Boot] [PATCH v3 2/2] imx: fix exception vectors relocation in imx27   Stefano Babic
• [U-Boot] [RFC Patch 1/2] powerpc: Move fsl_errata.h out of arch/powerpc   nikhil.badola at freescale.com
• [U-Boot] [PATCH v5 1/3] Kconfig: Add EXPERT option   Albert ARIBAUD
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Lukasz Majewski
• [U-Boot] [PATCHv4 0/6] ls102xa: HYP/non-sec: for ls102xa.   Xiubo Li
• [U-Boot] [PATCHv4 1/6] ARM: HYP/non-sec: add the pen address BE mode support.   Xiubo Li
• [U-Boot] [PATCHv4 2/6] ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.   Xiubo Li
• [U-Boot] [PATCHv4 3/6] ls1021a: adding a secondary core boot address and kick functions   Xiubo Li
• [U-Boot] [PATCHv4 4/6] ls102xa: changing a few targets' configurations.   Xiubo Li
• [U-Boot] [PATCHv4 5/6] ARM: ls102xa: allow all the peripheral access permission as R/W.   Xiubo Li
• [U-Boot] [PATCHv4 6/6] ARM: ls102xa: Setting device's stream id for SMMUs.   Xiubo Li
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Stefan Roese
• [U-Boot] [PATCH 8/8] dm: core: abolish u-boot, dm-pre-reloc property   Masahiro Yamada
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Heiko Schocher
• [U-Boot] USB Host not enumerating properly on AM335x-based board   Eric Bénard
• [U-Boot] [PATCH 5/5] lcd: refactor lcd console stuff into its own file   Nikita Kiryanov
• [U-Boot] [PATCH] fdt: remove fdtdec_get_alias_node() function   Masahiro Yamada
• [U-Boot] [PATCH 0/5] introduce sata stop   Nikita Kiryanov
• [U-Boot] [PATCH 1/5] arm: mx6: introduce disable_sata_clock   Nikita Kiryanov
• [U-Boot] [PATCH 2/5] sata: implement reset_sata for dwc_ahsata   Nikita Kiryanov
• [U-Boot] [PATCH 3/5] cmd_sata: implement sata stop command   Nikita Kiryanov
• [U-Boot] [PATCH 4/5] arm: mx6: cm_fx6: implement board specific sata stop   Nikita Kiryanov
• [U-Boot] [PATCH 5/5] arm: imx: stop sata on boot   Nikita Kiryanov
• [U-Boot] [PATCH ] MMC: fix user capacity for partitioned eMMC card   Jaehoon Chung
• [U-Boot] [PATCH ] MMC: fix user capacity for partitioned eMMC card   Markus Niebel
• [U-Boot] [PATCH] drivers: usb: fsl: Workaround for Erratum A004477   Nikhil Badola
• [U-Boot] Query on CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] [PATCH] drivers: usb: fsl: Workaround for Erratum A004477   Albert ARIBAUD
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Jeroen Hofstee
• [U-Boot] [PATCH ] MMC: fix user capacity for partitioned eMMC card   Jaehoon Chung
• [U-Boot] [PATCH v1] fdt: Allow non-FDT kernels to boot when CONFIG_OF_LIBFDT is defined   Hans de Goede
• [U-Boot] USB Host not enumerating properly on AM335x-based board   Maxime Ripard
• [U-Boot] [PATCH] arm: make arch memset/memcpy to work with Thumb2 builds   Stefan Agner
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Albert ARIBAUD
• [U-Boot] [PATCH v2] arm: build arch memset/memcpy in Thumb2 mode   Stefan Agner
• [U-Boot] [PATCH] tbs2910: Fix error handling in board_mmc_init()   Stefano Babic
• [U-Boot] [PATCH] arm: make arch memset/memcpy to work with Thumb2 builds   Albert ARIBAUD
• [U-Boot] [PATCH v7 1/4] mx6: clock: Add thermal clock enable function   Stefano Babic
• [U-Boot] [PATCH v7 2/4] DM: thermal: Add imx thermal DM driver   Stefano Babic
• [U-Boot] [PATCH v7 3/4] mx6: thermal: Check cpu temperature via thermal sensor   Stefano Babic
• [U-Boot] [PATCH v7 4/4] mx6: mx6sabre common: Enable i.MX thermal DM driver   Stefano Babic
• [U-Boot] [PATCH 1/5] mx51evk: Fix error handling in board_mmc_init()   Stefano Babic
• [U-Boot] [PATCH v2 2/2] odroid: usbhost - Add missing gpio_request call   Sjoerd Simons
• [U-Boot] [PATCH] sun6i: Add gmac support for sun6i boards   Hans de Goede
• [U-Boot] [PATCH] arm: make arch memset/memcpy to work with Thumb2 builds   Bill Pringlemeir
• [U-Boot] [PATCH 1/3] mxs_ocotp: prevent error path from returning success   Hector Palacios
• [U-Boot] [PATCH 2/3] mxs_ocotp: check for errors from the OTP controller after writing   Hector Palacios
• [U-Boot] [PATCH 3/3] mxs_ocotp: clear the error flag before initiating write operation   Hector Palacios
• [U-Boot] [RFC Patch 1/2] powerpc: Move fsl_errata.h out of arch/powerpc   York Sun
• [U-Boot] [PATCH 2/3] mxs_ocotp: check for errors from the OTP controller after writing   Fabio Estevam
• [U-Boot] help on using buildman   York Sun
• [U-Boot] help on using buildman   York Sun
• [U-Boot] [RFC Patch 1/2] powerpc: Move fsl_errata.h out of arch/powerpc   York Sun
• [U-Boot] [PATCH 2/3] mxs_ocotp: check for errors from the OTP controller after writing   Hector Palacios
• [U-Boot] [PATCH v2 0/5] PL01x: baudrate & line control fixes   Vikas Manocha
• [U-Boot] [PATCH v2 1/5] serial: pl01x: pass pl01x_type to set baudrate   Vikas Manocha
• [U-Boot] [PATCH v2 2/5] serial: pl01x: fix pl011 baud rate configuration   Vikas Manocha
• [U-Boot] [PATCH v2 3/5] serial: pl01x: move all line control at same place   Vikas Manocha
• [U-Boot] [PATCH v2 4/5] serial: pl01x: disable as per type of pl01x   Vikas Manocha
• [U-Boot] [PATCH v2 5/5] serial: pl01x: avoid pl01x type check two times   Vikas Manocha
• [U-Boot] [PATCH 1/3] ot1200: Fix error handling in board_mmc_init()   Fabio Estevam
• [U-Boot] [PATCH 2/3] nitrogen6x: Fix error handling in board_mmc_init()   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx6boards: Fix error handling in board_mmc_init()   Fabio Estevam
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Jeroen Hofstee
• [U-Boot] USB Host not enumerating properly on AM335x-based board   Marek Vasut
• [U-Boot] [PATCH] MIPS: fix setup of initial stack frame   Daniel Schwierzeck
• [U-Boot] [PATCH 1/7] common/board_f: add setup of initial stack frame for MIPS   Daniel Schwierzeck
• [U-Boot] [RFC PATCH] Kbuild: introduce Makefile in arch/$ARCH/   Daniel Schwierzeck
• [U-Boot] [PATCH v3] arm: bcm: update Cygnus and NSP board families   Steve Rae
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Albert ARIBAUD
• [U-Boot] [PATCH] Revert "hush: fix segfault on syntax error"   Rabin Vincent
• [U-Boot] [PATCH 1/7] common/board_f: add setup of initial stack frame for MIPS   Simon Glass
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Simon Glass
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Simon Glass
• [U-Boot] [PATCH v2] Kbuild: introduce Makefile in arch/$ARCH/   Daniel Schwierzeck
• [U-Boot] buildman reports error of script/binutils-version.sh   York Sun
• [U-Boot] USB Host not enumerating properly on AM335x-based board   Anatolij Gustschin
• [U-Boot] [RFC Patch 2/2] driver/usb/fsl: Make FSL USB driver common   nikhil.badola at freescale.com
• [U-Boot] [RFC Patch 1/2] powerpc: Move fsl_errata.h out of arch/powerpc   nikhil.badola at freescale.com
• [U-Boot] u-boot build issue   Lalitkumar Choudhary
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Lukasz Majewski
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Albert ARIBAUD
• [U-Boot] set and test a local variable in a script   Andreas Neubacher
• [U-Boot] [PATCH 2/3] mxs_ocotp: check for errors from the OTP controller after writing   Fabio Estevam
• [U-Boot] [PATCH 2/3] mxs_ocotp: check for errors from the OTP controller after writing   Fabio Estevam
• [U-Boot] [PATCH 2/3] mxs_ocotp: check for errors from the OTP controller after writing   Fabio Estevam
• [U-Boot] set and test a local variable in a script   Wolfgang Denk
• [U-Boot] u-boot build issue   Wolfgang Denk
• [U-Boot] [PATCH] imx:mx6 fix return value of mxc_get_clock   Peng Fan
• [U-Boot] config_distro_bootcmd: Avoid scanning usb twice (under some circumstances)   Hans de Goede
• [U-Boot] [PATCH] sunxi: Use "usb start" rather then "run usb_init" for preboot with usb-kbd   Hans de Goede
• [U-Boot] [PATCH] sunxi: Use "usb start" rather then "run usb_init" for preboot with usb-kbd   Ian Campbell
• [U-Boot] [PATCH] sunxi: correct Mele M9 Vbus gpio settings   Hans de Goede
• [U-Boot] [PATCH 1/2] config_distro_bootcmd.h: Allow user to indicate that usb is inited in preboot   Hans de Goede
• [U-Boot] [PATCH 2/2] sunxi: Avoid usb getting scanned twice when using usb kbd + usb boot   Hans de Goede
• [U-Boot] USB Host not enumerating properly on AM335x-based board   Albert ARIBAUD
• [U-Boot] [PATCH v2 08/17] dm: i2c: Add a uclass for I2C   Albert ARIBAUD
• [U-Boot] [PATCH] sunxi: correct Mele M9 Vbus gpio settings   Ian Campbell
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] [PATCH v2 1/9] dm: at91: Correct text base for snapper9260   Simon Glass
• [U-Boot] [PATCH v2 2/9] dm: at91: Move snapper9260 to generic baord   Simon Glass
• [U-Boot] [PATCH v2 3/9] dm: at91: Add driver model support for atmel GPIO driver   Simon Glass
• [U-Boot] [PATCH v2 4/9] dm: at91: Add platform data for GPIO on at91sam9260-based boards   Simon Glass
• [U-Boot] [PATCH v2 5/9] dm: at91: Refactor serial driver slightly for driver model   Simon Glass
• [U-Boot] [PATCH v2 6/9] dm: at91: Add driver model support for the serial driver   Simon Glass
• [U-Boot] [PATCH v2 7/9] dm: at91: Convert snapper9260 to use driver model   Simon Glass
• [U-Boot] [PATCH v2 8/9] dm: at91: Add myself as maintainer for snapper9260   Simon Glass
• [U-Boot] [PATCH v2 9/9] dm: serial: Support changing the baud rate   Simon Glass
• [U-Boot] [PATCH v3 02/14] dm: tegra: Avoid using arch-specific memcpy() in SPL   Simon Glass
• [U-Boot] [PATCH v3 03/14] dm: Split the simple malloc() implementation into its own file   Simon Glass
• [U-Boot] [PATCH v3 04/14] dm: arm: spl: Allow simple malloc() in SPL   Simon Glass
• [U-Boot] [PATCH v3 05/14] dm: spl: Make simple malloc() available when enabled   Simon Glass
• [U-Boot] [PATCH v3 06/14] dm: spl: Allow driver model to be used   Simon Glass
• [U-Boot] [PATCH v3 08/14] dm: Allow stdio registration to be dropped   Simon Glass
• [U-Boot] [PATCH v3 09/14] dm: Disable dm_warn() in SPL   Simon Glass
• [U-Boot] [PATCH v3 10/14] dm: tegra: Add platform data for the SPL uart   Simon Glass
• [U-Boot] [PATCH v3 11/14] dm: tegra: Add platform data for the GPIO driver   Simon Glass
• [U-Boot] [PATCH v3 12/14] dm: arm: spl: Make driver model linker lists available   Simon Glass
• [U-Boot] [PATCH v3 14/14] dm: Update documentation to include CONFIG_DM... options   Simon Glass
• [U-Boot] [PATCH v2 01/17] dm: i2c: Move error reporting into a common function   Simon Glass
• [U-Boot] [PATCH v2 02/17] dm: core: Allow access to the device's driver_id data   Simon Glass
• [U-Boot] [PATCH v2 03/17] dm: core: Add functions to find parent and OF data   Simon Glass
• [U-Boot] [PATCH v2 04/17] dm: fdt: Correct handling of aliases with embedded digits   Simon Glass
• [U-Boot] [PATCH v2 05/17] dm: Add a function to bind a device by driver name   Simon Glass
• [U-Boot] [PATCH v2 06/17] dm: spi: Correct handling of SPI chip selects in sandbox   Simon Glass
• [U-Boot] [PATCH v2 07/17] dm: spi: Use device_bind_driver() instead of our own function   Simon Glass
• [U-Boot] [PATCH] cros_ec: Fix uninitialised variable in cros_ec.c   Simon Glass
• [U-Boot] [PATCH 1/8] dm: core: a trivial clean up   Simon Glass
• [U-Boot] [PATCH 2/8] dm: core: remove meaningless if conditional   Simon Glass
• [U-Boot] [PATCH 3/8] dm: core: remove unnecessary return condition in driver lookup   Simon Glass
• [U-Boot] [PATCH 4/8] dm: core: remove unnecessary return condition in uclass lookup   Simon Glass
• [U-Boot] [PATCH v2 1/5] sun6i: Make dram clk and zq value Kconfig options   Hans de Goede
• [U-Boot] [PATCH v2 0/5] sun6i: A31s / CSQ_CS908 board support   Hans de Goede
• [U-Boot] [PATCH v2 1/5] sun6i: Make dram clk and zq value Kconfig options   Hans de Goede
• [U-Boot] [PATCH v2 2/5] sun6i: Add sunxi_get_ss_bonding_id() function   Hans de Goede
• [U-Boot] [PATCH v2 3/5] sun6i: dram: Do not try to initialize a second dram chan on A31s   Hans de Goede
• [U-Boot] [PATCH v2 4/5] sun6i: Drop some "unknown magic" from dram init   Hans de Goede
• [U-Boot] [PATCH v2 5/5] sun6i: Add new CSQ_CS908 board   Hans de Goede
• [U-Boot] [PATCH v2 00/12] spi: sf: ICH SPI driver fix and flash params update   Bin Meng
• [U-Boot] usbkbd input double echoed   Nikita Kiryanov
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] usbkbd input double echoed   Hans de Goede
• [U-Boot] [PATCH] sunxi: video: Add extra modes and allow selecting the mode via hdmi_mode env   Hans de Goede
• [U-Boot] [PATCH v3 1/4] dts: Bring in Chrome OS keyboard device tree definition   Simon Glass
• [U-Boot] [PATCH v3 2/4] tegra: dts: Sync tegra124.dtsi with linux kernel   Simon Glass
• [U-Boot] [PATCH v3 3/4] tegra: config: Enable FIT and device tree for all boards   Simon Glass
• [U-Boot] [PATCH v3 4/4] ARM: tegra: Add support for nyan board   Simon Glass
• [U-Boot] set and test a local variable in a script   Andreas Neubacher
• [U-Boot] [PATCH v3 4/4] ARM: tegra: Add support for nyan board   Simon Glass
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Lukasz Majewski
• [U-Boot] set and test a local variable in a script   Wolfgang Denk
• [U-Boot] buildman reports error of script/binutils-version.sh   Simon Glass
• [U-Boot] [PATCH] fdt: remove fdtdec_get_alias_node() function   Simon Glass
• [U-Boot] qemu-system-arm segfaults on zynq_zed   Douglas Rupp
• [U-Boot] [PATCH] imx:mx6 fix return value of mxc_get_clock   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] odroid: Update README with USB host usage   Minkyu Kang
• [U-Boot] [PATCH v2 2/2] odroid: usbhost - Add missing gpio_request call   Minkyu Kang
• [U-Boot] [PATCH v2] odroid: Turn blue LED on   Minkyu Kang
• [U-Boot] [PATCHv4 respin 2/6] ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.   Xiubo Li
• [U-Boot] [PATCH v8 2/3] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH] mtd/nand/vf610_nfc: Disable subpage writes   Sanchayan Maity
• [U-Boot] [PATCH v3] odroid: Turn blue LED on   Suriyan Ramasami
• [U-Boot] qemu-system-arm segfaults on zynq_zed   Jagan Teki
• [U-Boot] [PATCH v3] odroid: Turn blue LED on   Minkyu Kang
• [U-Boot] [PATCH v3 10/26] x86: ivybridge: Enable PCI in early init   James Zhou
• [U-Boot] WARNING Could not get liodn of node /pcie at ffe240000: FDT_ERR_NOTFOUND   Joakim Tjernlund
• [U-Boot] [PATCH] arm: exynos: fix the div value for set_mmc_clk   Minkyu Kang
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Lukasz Majewski
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Guillaume Gardet
• [U-Boot] [PATCH 1/9 v2] net/fm: add 2.5G SGMII support   Shengzhou Liu
• [U-Boot] [PATCH 2/9 v2] powerpc/mpc85xx: Add T1024/T1023 SoC support   Shengzhou Liu
• [U-Boot] [PATCH 3/9 v2] powerpc/t1024qds: Add T1024 QDS board support   Shengzhou Liu
• [U-Boot] [PATCH 4/9 v2] powerpc/t1024rdb: Add T1024 RDB board support   Shengzhou Liu
• [U-Boot] [PATCH 5/9 v2] net/fman: update 10GEC to fit new SoC   Shengzhou Liu
• [U-Boot] [PATCH 6/9 v2] board/t1024qds: update pin multiplexing   Shengzhou Liu
• [U-Boot] [PATCH 7/9 v2] net/phy: enable serdes auto-negotiation for vsc8514 phy   Shengzhou Liu
• [U-Boot] [PATCH 8/9 v2] t1024qds: increase IO drive strength   Shengzhou Liu
• [U-Boot] [PATCH 9/9 v2] board/t1024qds: add retimer support on t1024qds   Shengzhou Liu
• [U-Boot] [PATCH 9/9 v2] board/t1024qds: add retimer support on t1024qds   Shengzhou Liu
• [U-Boot] USB port detection problem1   Balaji N
• [U-Boot] [PATCH] powerpc/hydra: fix judging condition of RGMII selection   shh.xie at gmail.com
• [U-Boot] [PATCH] Add custodian to the m68k subsystem.   Angelo Dureghello
• [U-Boot] m68k maintenance   Angelo Dureghello
• [U-Boot] [PATCH] Add custodian to the m68k subsystem.   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/83xx: add support for kmtepr2 board   Holger Brunck
• [U-Boot] [PATCH] Add custodian to the m68k subsystem.   Angelo Dureghello
• [U-Boot] [PATCH] gw_ventana: Use the generic spl_sd.cfg   Stefano Babic
• [U-Boot] [PATCH 0/5] introduce sata stop   Stefano Babic
• [U-Boot] [PATCH 1/3] ot1200: Fix error handling in board_mmc_init()   Stefano Babic
• [U-Boot] [PATCH 2/3] nitrogen6x: Fix error handling in board_mmc_init()   Stefano Babic
• [U-Boot] [PATCH 3/3] mx6boards: Fix error handling in board_mmc_init()   Stefano Babic
• [U-Boot] [PATCH 1/3] ot1200: Fix error handling in board_mmc_init()   Christian Gmeiner
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH] thermal: imx_thermal: Do not display calibration data   Fabio Estevam
• [U-Boot] AM335x Ethernet pin mux confusion   Andy Pont
• [U-Boot] [PATCH v2] Add custodians to the m68k subsystem.   Angelo Dureghello
• [U-Boot] usbkbd input double echoed   Nikita Kiryanov
• [U-Boot] qemu-system-arm segfaults on zynq_zed   Douglas Rupp
• [U-Boot] [PATCH 0/2] No need for parade bridge on peach-pi   Sjoerd Simons
• [U-Boot] [PATCH 1/2] exynos5420: fix compilation without parade video   Sjoerd Simons
• [U-Boot] [PATCH 2/2] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Sjoerd Simons
• [U-Boot] [PATCH v2] Add custodians to the m68k subsystem.   Wolfgang Denk
• [U-Boot] [PATCH v2 1/3] Kconfig: Add EXPERT option   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/3] ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/3] ARM: bootm: Allow booting in secure mode on hyp capable systems   Albert ARIBAUD
• [U-Boot] [PATCH U-Boot] ARM: rpi_b: detect board revision   Simon Glass
• [U-Boot] [PATCH 0/5] PL01x: baudrate & line control fixes   Simon Glass
• [U-Boot] [PATCH 1/2] ARM: rpi: rename rpi_b to rpi   Simon Glass
• [U-Boot] [PATCH 2/2] ARM: rpi: support an environment   Simon Glass
• [U-Boot] Raspberry Pi with driver model   Simon Glass
• [U-Boot] [PATCH] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Lubomir Popov
• [U-Boot] [PATCH 2/2] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Simon Glass
• [U-Boot] [PATCH 0/5] sunxi: display: Add DDC & EDID support   Hans de Goede
• [U-Boot] [PATCH 1/5] sunxi: display: Remove unused HDMI register addr defines   Hans de Goede
• [U-Boot] [PATCH 2/5] sunxi: display: Do not use eprintf in early boot   Hans de Goede
• [U-Boot] [PATCH 3/5] edid: Add an edid_dtd_to_fbmode() helper function   Hans de Goede
• [U-Boot] [PATCH 4/5] edid: Add an edid_check_checksum() helper function   Hans de Goede
• [U-Boot] [PATCH 5/5] sunxi: display: Add DDC & EDID support   Hans de Goede
• [U-Boot] [PATCH 1/5] sunxi: display: Remove unused HDMI register addr defines   Ian Campbell
• [U-Boot] [PATCH 2/2] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Sjoerd Simons
• [U-Boot] [PATCH 2/5] sunxi: display: Do not use eprintf in early boot   Ian Campbell
• [U-Boot] [PATCH 2/2] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Simon Glass
• [U-Boot] [PATCH] fs/ext4/ext4fs.c, fs/fs.c: Use lldiv and multiplication / subtraction on 64bit ops   Tom Rini
• [U-Boot] WARNING Could not get liodn of node /pcie at ffe240000: FDT_ERR_NOTFOUND   York Sun
• [U-Boot] qemu-system-arm segfaults on zynq_zed   Douglas Rupp
• [U-Boot] [PATCH v3 2/4] tegra: dts: Sync tegra124.dtsi with linux kernel   Stephen Warren
• [U-Boot] [PATCH v3 3/4] tegra: config: Enable FIT and device tree for all boards   Stephen Warren
• [U-Boot] [PATCH v3 2/4] tegra: dts: Sync tegra124.dtsi with linux kernel   Simon Glass
• [U-Boot] qemu-system-arm segfaults on zynq_zed   Sören Brinkmann
• [U-Boot] [PATCH v3 4/4] ARM: tegra: Add support for nyan board   Stephen Warren
• [U-Boot] [PATCH v3 4/4] ARM: tegra: Add support for nyan board   Stephen Warren
• [U-Boot] [PATCH v3 4/4] ARM: tegra: Add support for nyan board   Stephen Warren
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] qemu-system-arm segfaults on zynq_zed   Douglas Rupp
• [U-Boot] qemu-system-arm segfaults on zynq_zed   Sören Brinkmann
• [U-Boot] [RFC Patch 2/2] driver/usb/fsl: Make FSL USB driver common   York Sun
• [U-Boot] [PATCH] fix: tools: kwbimage.c: Initialize headersz to suppress warning   Albert ARIBAUD
• [U-Boot] qemu-system-arm segfaults on zynq_zed   Douglas Rupp
• [U-Boot] [PATCH v3 10/26] x86: ivybridge: Enable PCI in early init   Simon Glass
• [U-Boot] qemu-system-arm segfaults on zynq_zed   Sören Brinkmann
• [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Simon Glass
• [U-Boot] [PATCH v3 0/10] dm: Add I2C support and convert sandbox, tegra   Simon Glass
• [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Simon Glass
• [U-Boot] [PATCH v3 02/10] dm: i2c: Implement driver model support in the i2c command   Simon Glass
• [U-Boot] [PATCH v3 03/10] dm: i2c: Add I2C emulation driver for sandbox   Simon Glass
• [U-Boot] [PATCH v3 04/10] dm: i2c: Add a sandbox I2C driver   Simon Glass
• [U-Boot] [PATCH v3 05/10] dm: i2c: Add an I2C EEPROM simulator   Simon Glass
• [U-Boot] [PATCH v3 06/10] dm: i2c: config: Enable I2C for sandbox using driver model   Simon Glass
• [U-Boot] [PATCH v3 07/10] dm: i2c: dts: Add an I2C bus for sandbox   Simon Glass
• [U-Boot] [PATCH v3 08/10] dm: Add a simple EEPROM driver   Simon Glass
• [U-Boot] [PATCH v3 09/10] dm: i2c: Add tests for I2C   Simon Glass
• [U-Boot] [PATCH v3 10/10] dm: i2c: tegra: Convert to driver model   Simon Glass
• [U-Boot] [PATCH] RFC: Add driver model support for PCI   Simon Glass
• [U-Boot] [PATCH 0/1] sun7i: Set ARMV7_BOOT_SEC_DEFAULT when OLD_SUNXI_KERNEL_COMPAT is set   Hans de Goede
• [U-Boot] [PATCH] sun7i: Set ARMV7_BOOT_SEC_DEFAULT when OLD_SUNXI_KERNEL_COMPAT is set   Hans de Goede
• [U-Boot] [PATCH 1/5] sunxi: display: Remove unused HDMI register addr defines   Anatolij Gustschin
• [U-Boot] [PATCH 2/5] sunxi: display: Do not use eprintf in early boot   Anatolij Gustschin
• [U-Boot] [PATCH] fs/ext4/ext4fs.c, fs/fs.c: Use lldiv and multiplication / subtraction on 64bit ops   Simon Glass
• [U-Boot] qemu-system-arm segfaults on zynq_zed   Douglas Rupp
• [U-Boot] Building fw_env tools seems broken   Denys Dmytriyenko
• [U-Boot] [U-Boot, 3/5] edid: Add an edid_dtd_to_fbmode() helper function   Hans de Goede
• [U-Boot] [U-Boot,1/5] ARM: remove CONFIG_ARMV7 defines   Tom Rini
• [U-Boot] [U-Boot,2/5] ARM: remove CONFIG_ARM1176 defines   Tom Rini
• [U-Boot] [U-Boot,3/5] ARM: remove CONFIG_ARM920T defines   Tom Rini
• [U-Boot] [U-Boot,4/5] ARM: remove CONFIG_ARM926EJS defines   Tom Rini
• [U-Boot] [U-Boot,5/5] ARM: remove CONFIG_ARM1136 defines   Tom Rini
• [U-Boot] [U-Boot, v3, 1/6] replace DIV_ROUND with DIV_ROUND_CLOSEST   Tom Rini
• [U-Boot] [U-Boot, v3, 2/6] include/common.h: remove DIV_ROUND definition   Tom Rini
• [U-Boot] [U-Boot, v3, 3/6] include: move various macros to include/linux/kernel.h   Tom Rini
• [U-Boot] [U-Boot,v3,4/6] linux/kernel.h: import more macros   Tom Rini
• [U-Boot] [U-Boot, v3, 5/6] linux/kernel.h: add typechecking to roundup macro   Tom Rini
• [U-Boot] [U-Boot, v3, 6/6] linux/kernel.h: sync min, max, min3, max3 macros with Linux   Tom Rini
• [U-Boot] [U-Boot, v2] spl: Change debug to printf for "Unsupported boot-device"   Tom Rini
• [U-Boot] [U-Boot,v2,1/2] ARM: bcm: Enable five Cygnus boards   Tom Rini
• [U-Boot] [U-Boot,v2,2/2] ARM: bcm: Enable bcm11130 boards   Tom Rini
• [U-Boot] sata: fix a bug in init_sata() for pci-sata card   Tom Rini
• [U-Boot] [U-Boot, v3] fs: make it possible to read the filesystem UUID   Tom Rini
• [U-Boot] [U-Boot, v3, 01/30] vsprintf: Add modifier for phys_addr_t   Tom Rini
• [U-Boot] [U-Boot, v3, 02/30] pci: Abort early if bus does not exist   Tom Rini
• [U-Boot] [U-Boot,v3,03/30] pci: Honour pci_skip_dev()   Tom Rini
• [U-Boot] [U-Boot,v3,04/30] Add pr_fmt() macro   Tom Rini
• [U-Boot] [U-Boot, v3, 24/30] malloc: Output region when debugging   Tom Rini
• [U-Boot] [U-Boot, 1/4] kbuild: Descend into SOC directory from CPU directory   Tom Rini
• [U-Boot] [U-Boot, 2/4] x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory   Tom Rini
• [U-Boot] [U-Boot, 3/4] kbuild: use SoC-specific CONFIG to descend into SoC directory   Tom Rini
• [U-Boot] [U-Boot, 4/4] tegra: do not descend into empty directories   Tom Rini
• [U-Boot] config: remove redundant CONFIG_SYS_PROMPT defines   Tom Rini
• [U-Boot] [U-Boot, 1/4] FIT: add some FIT configurations to Kconfig   Tom Rini
• [U-Boot] [U-Boot,2/4] hush: add CONFIG_HUSH_PARSER to Kconfig   Tom Rini
• [U-Boot] [U-Boot, 3/4] commands: add more command entries in Kconfig   Tom Rini
• [U-Boot] [U-Boot, 4/4] spl: fix descending condition to drivers/mtd/nand/   Tom Rini
• [U-Boot] [U-Boot, 1/7] common/board_f: add setup of initial stack frame for MIPS   Tom Rini
• [U-Boot] [U-Boot, 2/7] common/board_f: fix gcc warning on MIPS64   Tom Rini
• [U-Boot] [U-Boot, v8, 1/6] sandbox: Use md5sum and fatwrite to enable testing of fs commands   Tom Rini
• [U-Boot] [U-Boot, v8, 2/6] fat: Prepare API change for files greater than 2GB   Tom Rini
• [U-Boot] [U-Boot, v8, 3/6] ext4: Prepare API change for files greater than 2GB   Tom Rini
• [U-Boot] [U-Boot, v8, 4/6] sandbox: Prepare API change for files greater than 2GB   Tom Rini
• [U-Boot] [U-Boot, v8, 5/6] fs: API changes enabling extra parameter to return size of type loff_t   Tom Rini
• [U-Boot] [U-Boot, v8, 6/6] sandbox: script for testing sandbox/ext4/fat/fs commands   Tom Rini
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH] Revert "hush: fix segfault on syntax error"   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Tom Rini
• [U-Boot] [PATCH 1/7] common/board_f: add setup of initial stack frame for MIPS   Tom Rini
• [U-Boot] USB Host not enumerating properly on AM335x-based board   Maxime Ripard
• [U-Boot] [PATCH 8/8] dm: core: abolish u-boot, dm-pre-reloc property   Simon Glass
• [U-Boot] [PATCH 2/2] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Sjoerd Simons
• [U-Boot] [PATCH v3 4/4] ARM: tegra: Add support for nyan board   Simon Glass
• [U-Boot] [PATCH v3 3/4] tegra: config: Enable FIT and device tree for all boards   Simon Glass
• [U-Boot] [PATCH 0/5] PL01x: baudrate & line control fixes   vikasm
• [U-Boot] [PATCH v2 0/2] dm: rpi: Move Raspberry Pi to use driver model   Simon Glass
• [U-Boot] [PATCH v2 1/2] dm: rpi: Move serial to driver model   Simon Glass
• [U-Boot] [PATCH v2 2/2] dm: rpi: Move script load address to 0x8000   Simon Glass
• [U-Boot] [PATCH V2] ORIGEN: Enhance origen config to be more flexible on boot.   Minkyu Kang
• [U-Boot] [PATCH] ARNDALE: Enhance arndale config to be more flexible on boot.   Minkyu Kang
• [U-Boot] [PATCH] tools: Add ifdtool to .gitignore   Bin Meng
• [U-Boot] [PATCH] tools: Add ifdtool to .gitignore   Simon Glass
• [U-Boot] [PATCH v2 02/30] Add ALIGN_DOWN() to find next smallest alignment   Simon Glass
• [U-Boot] [PATCH v2 01/30] Align embedded device tree correctly   Simon Glass
• [U-Boot] [PATCH v2 03/30] pci: Update pci_ids.h to include some missing IDs   Simon Glass
• [U-Boot] [PATCH v2 04/30] x86: Remove board_early_init_r()   Simon Glass
• [U-Boot] [PATCH v2 05/30] x86: Panic if there is no relocation data   Simon Glass
• [U-Boot] [PATCH v2 06/30] x86: Ensure that all relocation data is included in the image   Simon Glass
• [U-Boot] [PATCH v2 07/30] x86: Factor out common values in the link script   Simon Glass
• [U-Boot] [PATCH v2 08/30] rtc: mc146818: Set up RTC at start of day   Simon Glass
• [U-Boot] [PATCH v2 09/30] x86: Add ioapic.h header   Simon Glass
• [U-Boot] [PATCH v2 10/30] x86: pci: Add handlers before and after a PCI hose scan   Simon Glass
• [U-Boot] [PATCH v2 11/30] x86: config: Enable plug-and-play for link PCI   Simon Glass
• [U-Boot] [PATCH v2 12/30] pci: Add functions to read and write a BAR address   Simon Glass
• [U-Boot] [PATCH v2 13/30] x86: Set up edge triggering on interrupt 9   Simon Glass
• [U-Boot] [PATCH v2 14/30] x86: ivybridge: Add support for BD82x6x PCH   Simon Glass
• [U-Boot] [PATCH v2 15/30] x86: Add a simple header file for ACPI   Simon Glass
• [U-Boot] [PATCH v2 16/30] x86: ivybridge: Add PCH init   Simon Glass
• [U-Boot] [PATCH v2 17/30] x86: ivybridge: Add additional LPC init   Simon Glass
• [U-Boot] [PATCH v2 18/30] x86: dts: Move PCI peripherals into a pci node   Simon Glass
• [U-Boot] [PATCH v2 19/30] x86: dts: Add LPC settings for link   Simon Glass
• [U-Boot] [PATCH v2 20/30] x86: ivybridge: Add SATA init   Simon Glass
• [U-Boot] [PATCH v2 21/30] x86: dts: Add SATA settings for link   Simon Glass
• [U-Boot] [PATCH v2 22/30] x86: ivybridge: Set up EHCI USB   Simon Glass
• [U-Boot] [PATCH v2 23/30] x86: config: Enable USB on link   Simon Glass
• [U-Boot] [PATCH v2 24/30] x86: ivybridge: Set up XHCI USB   Simon Glass
• [U-Boot] [PATCH v2 25/30] x86: Add Intel speedstep and turbo mode code   Simon Glass
• [U-Boot] [PATCH 1/4] x86: Call cpu_init_interrupts() from interrupt_init()   Simon Glass
• [U-Boot] [PATCH 2/4] x86: Remove cpu_init_r() for x86   Simon Glass
• [U-Boot] [PATCH 3/4] x86: Refactor interrupt_init()   Simon Glass
• [U-Boot] [PATCH 4/4] x86: Remove unnecessary call to initr_enable_interrupts()   Simon Glass
• [U-Boot] [PATCH v2 01/12] spi/ich.c: Fix a bug of reading from a non-64 bytes aligned address   Simon Glass
• [U-Boot] [PATCH v2 01/12] spi/ich.c: Fix a bug of reading from a non-64 bytes aligned address   Bin Meng
• [U-Boot] [PATCH 8/8] dm: core: abolish u-boot, dm-pre-reloc property   Masahiro Yamada
• [U-Boot] [PATCH U-Boot] ARM: rpi_b: detect board revision   Stephen Warren
• [U-Boot] [PATCH 1/4] x86: Call cpu_init_interrupts() from interrupt_init()   Simon Glass
• [U-Boot] [PATCH 2/4] x86: Remove cpu_init_r() for x86   Simon Glass
• [U-Boot] [PATCH 3/4] x86: Refactor interrupt_init()   Simon Glass
• [U-Boot] [PATCH 4/4] x86: Remove unnecessary call to initr_enable_interrupts()   Simon Glass
• [U-Boot] [PATCH v2 0/2] mtd: denali: Use SELF_INIT to fix up registers after nand_scan_ident()   Masahiro Yamada
• [U-Boot] [PATCH U-Boot] ARM: rpi_b: detect board revision   Simon Glass
• [U-Boot] [PATCH 0/5] PL01x: baudrate & line control fixes   Simon Glass
• [U-Boot] [PATCH v2] Kbuild: introduce Makefile in arch/$ARCH/   Masahiro Yamada
• [U-Boot] [PATCH v2 08/30] rtc: mc146818: Set up RTC at start of day   Simon Glass
• [U-Boot] Tegra board problems   Simon Glass
• [U-Boot] [PATCH v2 2/2] dm: rpi: Move script load address to 0x8000   Stephen Warren
• [U-Boot] [PATCH v2 1/2] dm: rpi: Move serial to driver model   Stephen Warren
• [U-Boot] [PATCH v2 2/2] dm: rpi: Move script load address to 0x8000   Simon Glass
• [U-Boot] [PATCH 2/2] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Simon Glass
• [U-Boot] [PATCH v3 0/8] x86: Add additional system setup for ivybridge   Simon Glass
• [U-Boot] [PATCH v3 1/8] x86: Drop old CONFIG_INTEL_CORE_ARCH code   Simon Glass
• [U-Boot] [PATCH v3 2/8] x86: Add LAPIC setup code   Simon Glass
• [U-Boot] [PATCH v3 3/8] x86: Add init for model 206AX CPU   Simon Glass
• [U-Boot] [PATCH v3 4/8] x86: Drop some msr functions that we don't support   Simon Glass
• [U-Boot] [PATCH v3 5/8] x86: ivybridge: Add northbridge init functions   Simon Glass
• [U-Boot] [PATCH v3 6/8] x86: config: Enable SPI for chromebook_link   Simon Glass
• [U-Boot] [PATCH v3 7/8] x86: Add ivybridge directory to Makefile   Simon Glass
• [U-Boot] [PATCH v3 8/8] Fix SIZE_MAX compiler warning when using stdint.h   Simon Glass
• [U-Boot] [PATCH v3 0/8] x86: Add additional system setup for ivybridge   Simon Glass
• [U-Boot] Raspberry Pi with driver model   Stephen Warren
• [U-Boot] [PATCH v2 2/2] dm: rpi: Move script load address to 0x8000   Stephen Warren
• [U-Boot] [PATCH v2 2/2] dm: rpi: Move script load address to 0x8000   Simon Glass
• [U-Boot] Raspberry Pi with driver model   Simon Glass
• [U-Boot] [PATCH v3 0/2] dm: rpi: Move Raspberry Pi to use driver model   Simon Glass
• [U-Boot] [PATCH v3 1/2] dm: rpi: Move serial to driver model   Simon Glass
• [U-Boot] [PATCH v3 2/2] dm: serial_pl01x: Add missing private data size   Simon Glass
• [U-Boot] [PATCH v3 1/8] x86: Drop old CONFIG_INTEL_CORE_ARCH code   Bin Meng
• [U-Boot] [PATCH v3 2/8] x86: Add LAPIC setup code   Bin Meng
• [U-Boot] [PATCH 1/2] exynos5420: fix compilation without parade video   Ajay kumar
• [U-Boot] AM335x Ethernet pin mux confusion   Mugunthan V N
• [U-Boot] [PATCH v3 7/8] x86: Add ivybridge directory to Makefile   Masahiro Yamada
• [U-Boot] [PATCH] ARNDALE: Enhance arndale config to be more flexible on boot.   Guillaume Gardet
• [U-Boot] [PATCH V2] ORIGEN: Enhance origen config to be more flexible on boot.   Sjoerd Simons
• [U-Boot] [PATCH] bootz: fix silent console   Markus Niebel
• [U-Boot] [PATCH] sun7i: Set ARMV7_BOOT_SEC_DEFAULT when OLD_SUNXI_KERNEL_COMPAT is set   Ian Campbell
• [U-Boot] WARNING Could not get liodn of node /pcie at ffe240000: FDT_ERR_NOTFOUND   Laurentiu Tudor
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Hans de Goede
• [U-Boot] [PATCH] sunxi: video: Add extra modes and allow selecting the mode via hdmi_mode env   Ian Campbell
• [U-Boot] [PATCH 5/5] sunxi: display: Add DDC & EDID support   Ian Campbell
• [U-Boot] [PATCH v2 1/5] sun6i: Make dram clk and zq value Kconfig options   Ian Campbell
• [U-Boot] [PATCH v2 3/5] sun6i: dram: Do not try to initialize a second dram chan on A31s   Ian Campbell
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Wolfgang Denk
• [U-Boot] [PATCH] Add Alison Wang m68k custodian email/alias   Angelo Dureghello
• [U-Boot] [PATCH v2 1/5] sun6i: Make dram clk and zq value Kconfig options   Hans de Goede
• [U-Boot] [PATCH] sun6i: Add gmac support for sun6i boards   Ian Campbell
• [U-Boot] [PATCH] powerpc/c29xpcie: Add secure boot support   Mingkai Hu
• [U-Boot] [PATCH] powerpc/c29xpcie: Add secure boot support   Mingkai Hu
• [U-Boot] [PATCH] powerpc/c29xpcie: Add secure boot support   Mingkai.Hu at freescale.com
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Guillaume Gardet
• [U-Boot] [PATCH] sunxi: video: Add extra modes and allow selecting the mode via hdmi_mode env   Hans de Goede
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Lukasz Majewski
• [U-Boot] sunxi: CPU disabling   Jan Kiszka
• [U-Boot] [PATCH] Export redesign   Martin Dorwig
• [U-Boot] sunxi: CPU disabling   Marc Zyngier
• [U-Boot] sunxi: CPU disabling   Jan Kiszka
• [U-Boot] arm: socfpga: script for installing u-boot / u-boot-SPL   Pavel Machek
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Guillaume Gardet
• [U-Boot] [PATCH 1/3] sf: stmicro: Add support for N25Q32   xixiguo
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Tom Rini
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Guillaume Gardet
• [U-Boot] [PATCH 1/7] common/board_f: add setup of initial stack frame for MIPS   Daniel Schwierzeck
• [U-Boot] [PATCH] Export redesign   Simon Glass
• [U-Boot] AM335x Ethernet pin mux confusion   Andy Pont
• [U-Boot] [PATCH] bootz: fix silent console   Simon Glass
• [U-Boot] [PATCH] spl: Fix SPL EXT support   Guillaume GARDET
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Guillaume Gardet
• [U-Boot] [PATCH 2/2] mx6sxsabresd: Add thermal support   Fabio Estevam
• [U-Boot] [PATCH 1/2] mxc_ocotp: Do not disable the OCOTP clock after every access   Fabio Estevam
• [U-Boot] arm: socfpga: script for installing u-boot / u-boot-SPL   Marek Vasut
• [U-Boot] Tegra board problems   Stephen Warren
• [U-Boot] Tegra board problems   Stephen Warren
• [U-Boot] [PATCH v3 4/4] ARM: tegra: Add support for nyan board   Stephen Warren
• [U-Boot] Tegra board problems   Simon Glass
• [U-Boot] [PATCH v3 4/4] ARM: tegra: Add support for nyan board   Simon Glass
• [U-Boot] [PATCH] powerpc/c29xpcie: Add secure boot support   York Sun
• [U-Boot] [PATCH v3 3/4] tegra: config: Enable FIT and device tree for all boards   Stephen Warren
• [U-Boot] Tegra board problems   Stephen Warren
• [U-Boot] [PATCH] powerpc/c29xpcie: Add secure boot support   Mingkai.Hu at freescale.com
• [U-Boot] Raspberry Pi with driver model   Stephen Warren
• [U-Boot] [PATCH] powerpc/mpc85xx: Fix DDR TLB mapping leftover   York Sun
• [U-Boot] [PATCH] powerpc/c29xpcie: Add secure boot support   York Sun
• [U-Boot] Please pull u-boot-mpc85xx   York Sun
• [U-Boot] Raspberry Pi with driver model   Simon Glass
• [U-Boot] please pull u-boot-fsl-qoriq   York Sun
• [U-Boot] [PATCH] P1023RDB: Update default environment   York Sun
• [U-Boot] [PATCH] board/t2080qds: add readme for t2080qds   York Sun
• [U-Boot] [PATCH v1] exynos: Fix file system defines   Suriyan Ramasami
• [U-Boot] [PATCH v2] powerpc/t4rdb: Add support of CPLD   York Sun
• [U-Boot] [PATCH] config: MPC837X : Add complete USB EHCI support   York Sun
• [U-Boot] [PATCH 1/2][v2] powerpc/t2080qds: fixup dtb for 10g-kr   York Sun
• [U-Boot] [PATCH v3 3/4] tegra: config: Enable FIT and device tree for all boards   Simon Glass
• [U-Boot] [PATCH 2/2][v2] powerpc/t2080qds: fix for 1000BASE-KX   York Sun
• [U-Boot] [PATCH 1/4] net/fm: add 2.5G SGMII support   York Sun
• [U-Boot] [Patch] mmc: fsl_esdhc: fix f_max retrieval during init   York Sun
• [U-Boot] [PATCH 2/4] qe: add u-qe support to arm board   York Sun
• [U-Boot] [PATCH 3/4] qe: add qe support to ls1021aqds   York Sun
• [U-Boot] [PATCH 4/4] qe: add qe support for ls1021a-twr board   York Sun
• [U-Boot] [PATCH 3/4] arm: ls102xa: Fixed a register definition error   York Sun
• [U-Boot] [PATCH v2] u_qe: add u_qe_upload_firmware for u_qe   York Sun
• [U-Boot] Please pull u-boot-sunxi master   Simon Glass
• [U-Boot] [PATCH 1/3] drivers: usb: fsl: Move USB Errata checking code   York Sun
• [U-Boot] [PATCH] drivers : usb: fsl: Implement usb Erratum A007798 workaround   York Sun
• [U-Boot] [PATCH 1/2] drivers: usb: fsl: Define USB configs for LS102XA   York Sun
• [U-Boot] [PATCH 2/2] ls1: config: Enable USB EHCI Host on LS1021AQDS   York Sun
• [U-Boot] [PATCH v2 1/5] arm: ls102xa: Add snoop disable for slave port 0, 1 and 2   York Sun
• [U-Boot] [PATCH v2 2/5] arm: ls102xa: Remove bit reversing for SCFG registers   York Sun
• [U-Boot] [PATCH v2 3/5] ls102xa: ifc: nor: fix the write issue when bytes unaligned   York Sun
• [U-Boot] [PATCH v2 4/5] arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR board   York Sun
• [U-Boot] [PATCH v2 5/5] arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing   York Sun
• [U-Boot] [PATCH 1/9 v2] net/fm: add 2.5G SGMII support   York Sun
• [U-Boot] [PATCH 0/5] PL01x: baudrate & line control fixes   vikasm
• [U-Boot] [PATCH 1/2] mxc_ocotp: Do not disable the OCOTP clock after every access   Benoît Thébaudeau
• [U-Boot] [PATCH v4 0/4] add support for new arch stv0991   vikasm
• [U-Boot] [PATCH] spl: Fix SPL EXT support   Suriyan Ramasami
• [U-Boot] [PATCH 1/2] mxc_ocotp: Do not disable the OCOTP clock after every access   Fabio Estevam
• [U-Boot] [PATCH v4 0/4] add support for new arch stv0991   vikasm
• [U-Boot] [PATCH 1/2] mxc_ocotp: Do not disable the OCOTP clock after every access   Benoît Thébaudeau
• [U-Boot] [PATCH v4 0/4] add support for new arch stv0991   Simon Glass
• [U-Boot] [PATCH] ls1021aqds: add hwconfig setting to do pin mux   York Sun
• [U-Boot] [PATCH] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board   York Sun
• [U-Boot] [PATCH 2/3][v2] drivers: usb: Make usb device-tree fixup code architecture independent   York Sun
• [U-Boot] [PATCH] fs/ext4/ext4fs.c, fs/fs.c: Use lldiv and multiplication / subtraction on 64bit ops   Simon Glass
• [U-Boot] [PATCH v3 1/8] x86: Drop old CONFIG_INTEL_CORE_ARCH code   Simon Glass
• [U-Boot] [PATCH v3 2/8] x86: Add LAPIC setup code   Simon Glass
• [U-Boot] [PATCH v3 3/8] x86: Add init for model 206AX CPU   Simon Glass
• [U-Boot] [PATCH v3 4/8] x86: Drop some msr functions that we don't support   Simon Glass
• [U-Boot] [PATCH v3 5/8] x86: ivybridge: Add northbridge init functions   Simon Glass
• [U-Boot] [PATCH v3 6/8] x86: config: Enable SPI for chromebook_link   Simon Glass
• [U-Boot] [PATCH v3 7/8] x86: Add ivybridge directory to Makefile   Simon Glass
• [U-Boot] [PATCH v3 8/8] Fix SIZE_MAX compiler warning when using stdint.h   Simon Glass
• [U-Boot] [PATCH] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Simon Glass
• [U-Boot] [PATCH 01/19] x86: Add a definition of asmlinkage   Simon Glass
• [U-Boot] [PATCH 02/19] Introduce a header file for the BIOS emulator   Simon Glass
• [U-Boot] [PATCH 03/19] x86: Add GDT descriptors for option ROMs   Simon Glass
• [U-Boot] [PATCH 04/19] x86: Add vesa mode configuration options   Simon Glass
• [U-Boot] [PATCH 05/19] Add support for Vesa BIOS extensions   Simon Glass
• [U-Boot] [PATCH 06/19] x86: Add support for running option ROMs natively   Simon Glass
• [U-Boot] [PATCH 07/19] pci: Add general support for execution of video ROMs   Simon Glass
• [U-Boot] [PATCH 08/19] x86: video: Add video driver for bare x86 boards   Simon Glass
• [U-Boot] [PATCH 09/19] x86: Allow an option ROM to be built into U-Boot   Simon Glass
• [U-Boot] [PATCH 10/19] x86: Add initial video device init for Intel GMA   Simon Glass
• [U-Boot] [PATCH 11/19] x86: dts: Add video information to the device tree   Simon Glass
• [U-Boot] [PATCH 12/19] x86: config: Enable video support for chromebook_link   Simon Glass
• [U-Boot] [PATCH 13/19] bios_emulator: Allow x86 to use the emulator   Simon Glass
• [U-Boot] [PATCH 14/19] bios_emulator: Add vesa support and allow ROMs to be passed in as data   Simon Glass
• [U-Boot] [PATCH] dwc_ahsata.c: Add weak disable_sata_clock   Tom Rini
• [U-Boot] [PATCH 15/19] bios_emulator: Allow a custom interrupt handler to be installed   Simon Glass
• [U-Boot] [PATCH 16/19] bios_emulator: Add an option to enable debugging   Simon Glass
• [U-Boot] [PATCH 17/19] bios_emulator: Always print errors when opcode decode fails   Simon Glass
• [U-Boot] [PATCH 18/19] x86: chromebook_link: Enable the x86 emulator   Simon Glass
• [U-Boot] [PATCH 19/19] x86: chromebook_link: Enable the Chrome OS EC   Simon Glass
• [U-Boot] Bare x86 support is merged to u-boot-x86   Simon Glass
• [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY   York Sun
• [U-Boot] [PATCH v1] tools/kwboot: Allow just -t to function   Suriyan Ramasami
• [U-Boot] Bare x86 support is merged to u-boot-x86   Andy Pont
• [U-Boot] [PATCH v7] net/phy: Add support for CS4315/CS4340 PHY   Joe Hershberger
• [U-Boot] [PATCH] dwc_ahsata.c: Add weak disable_sata_clock   Soeren Moch
• [U-Boot] [PATCH] dwc_ahsata.c: Add weak disable_sata_clock   Tom Rini
• [U-Boot] [PATCH] dwc_ahsata.c: Add weak disable_sata_clock   Soeren Moch
• [U-Boot] [PATCH V2] powerpc/c29xpcie: Add secure boot support   Mingkai Hu
• [U-Boot] [PATCH] powerpc/mpc85xx: Fix DDR TLB mapping leftover   Scott Wood
• [U-Boot] [Patch v2] powerpc/mpc85xx: Fix DDR TLB mapping leftover   York Sun
• [U-Boot] [PATCH 2/3][v2] drivers: usb: Make usb device-tree fixup code architecture independent   nikhil.badola at freescale.com
• [U-Boot] ls1021aqds: add hwconfig setting to do pin mux   Yuan Yao
• [U-Boot] [PATCH v2] ls1021aqds: add hwconfig setting to do pin mux   Yuan Yao
• [U-Boot] ls1021aqds: add hwconfig setting to do pin mux   Wolfgang Denk
• [U-Boot] [PATCH v2] ls1021aqds: add hwconfig setting to do pin mux   Michael Trimarchi
• [U-Boot] [PATCH] mvebu_mmc: Speed up access time   drEagle
• [U-Boot] [PATCH v3] ls1021aqds: add hwconfig setting to do pin mux   Yuan Yao
• [U-Boot] [PATCH] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board   Huan Wang
• [U-Boot] [PATCH] Replace <compiler.h> with <linux/compiler.h>   Masahiro Yamada
• [U-Boot] [PATCH 0/2] Remove redundant macro defines   Masahiro Yamada
• [U-Boot] [PATCH 1/2] linux/compat.h: remove redundant macro defines   Masahiro Yamada
• [U-Boot] [PATCH 2/2] blackfin: include <linux/compiler.h> rather than define __iomem   Masahiro Yamada
• [U-Boot] [OpenQuestion] stdint.h and inttypes.h in U-Boot ?   Masahiro Yamada
• [U-Boot] [PATCH v3 8/8] Fix SIZE_MAX compiler warning when using stdint.h   Masahiro Yamada
• [U-Boot] Export redesign   Martin Dorwig
• [U-Boot] sunxi: CPU disabling   Jan Kiszka
• [U-Boot] WARNING Could not get liodn of node /pcie at ffe240000: FDT_ERR_NOTFOUND   Joakim Tjernlund
• [U-Boot] qemu-system-arm segfaults on zynq_zed   James Zhou
• [U-Boot] [PATCH] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Lubomir Popov
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [PATCH 1/8] ARM: UniPhier: do not compile platform data when CONFIG_OF_CONTROL=y   Masahiro Yamada
• [U-Boot] [PATCH 2/8] ARM: UniPhier: add dummy gpio.h to enable CONFIG_OF_CONTROL   Masahiro Yamada
• [U-Boot] [PATCH 3/8] ARM: UniPhier: add device tree sources   Masahiro Yamada
• [U-Boot] [PATCH 4/8] serial: UniPhier: support OF configuration   Masahiro Yamada
• [U-Boot] [PATCH 5/8] usb: UniPhier: support OF configuration   Masahiro Yamada
• [U-Boot] [PATCH 6/8] ARM: UniPhier: enable Device Tree control   Masahiro Yamada
• [U-Boot] [PATCH 7/8] ARM: UniPhier: display model name if it is available in device tree   Masahiro Yamada
• [U-Boot] [PATCH 8/8] ARM: UniPhier: move CONFIG_CMD_* and CONFIG_FIT* defines to defconfig   Masahiro Yamada
• [U-Boot] [PATCH v1] exynos: Fix file system defines   Ian Campbell
• [U-Boot] [PATCH] Kconfig: move EXPERT option under "General setup" menu   Masahiro Yamada
• [U-Boot] mx53loco: compilation broken with 2015.01-rc2   Guillaume Gardet
• [U-Boot] mx53loco: compilation broken with 2015.01-rc2   Stefano Babic
• [U-Boot] [PATCH] tbs2910: fix Kconfig   Soeren Moch
• [U-Boot] [PATCH] sata: fix reset_sata for dwc_ahsata   Soeren Moch
• [U-Boot] WARNING Could not get liodn of node /pcie at ffe240000: FDT_ERR_NOTFOUND   Laurentiu Tudor
• [U-Boot] [PATCH 1/2] sun6i: axp221: Add axp221_get_sid function   Hans de Goede
• [U-Boot] [PATCH 2/2] sunxi: Add sunxi_get_sid helper function   Hans de Goede
• [U-Boot] Make "usb start" only start / scan usb once ?   Hans de Goede
• [U-Boot] [PATCH V2] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Lubomir Popov
• [U-Boot] [PATCH 0/8] PSCI v0.2 framework for ARMv8   Jan Kiszka
• [U-Boot] sunxi: CPU disabling   Marc Zyngier
• [U-Boot] Tegra board problems   Simon Glass
• [U-Boot] [PATCH v3 8/8] Fix SIZE_MAX compiler warning when using stdint.h   Simon Glass
• [U-Boot] [PATCH] spl: Fix SPL EXT support   Simon Glass
• [U-Boot] [PATCH v2 01/12] spi/ich.c: Fix a bug of reading from a non-64 bytes aligned address   Simon Glass
• [U-Boot] [PATCH v1] exynos: Fix file system defines   Suriyan Ramasami
• [U-Boot] Please pull u-boot-fdt.git   Tom Rini
• [U-Boot] please pull u-boot-samsung master   Tom Rini
• [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Tom Rini
• [U-Boot] [PATCH] spl: Fix SPL EXT support   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx   Tom Rini
• [U-Boot] please pull u-boot-fsl-qoriq   Tom Rini
• [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] [PATCH v2 01/12] spi/ich.c: Fix a bug of reading from a non-64 bytes aligned address   Jagan Teki
• [U-Boot] [PATCH] fs/ext4/ext4fs.c, fs/fs.c: Use lldiv and multiplication / subtraction on 64bit ops   Tom Rini
• [U-Boot] Export redesign   Simon Glass
• [U-Boot] [PATCH v2 01/12] spi/ich.c: Fix a bug of reading from a non-64 bytes aligned address   Simon Glass
• [U-Boot] [PATCH] sata: fix reset_sata for dwc_ahsata   Nikita Kiryanov
• [U-Boot] [PATCH V2] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Simon Glass
• [U-Boot] [PATCH 1/2] socfpga: add missing struct member fifo_triple_byte   dinguyen at opensource.altera.com
• [U-Boot] [PATCH 2/2] socfpga: correctly increment freeze_controller_base address   dinguyen at opensource.altera.com
• [U-Boot] [PATCH 1/2] socfpga: add missing struct member fifo_triple_byte   dinguyen at opensource.altera.com
• [U-Boot] [PATCH 2/2] socfpga: correctly increment freeze_controller_base address   dinguyen at opensource.altera.com
• [U-Boot] [PATCH v2] fs/ext4/ext4fs.c, fs/fs.c fs/fat/fat_write.c: Adjust 64bit math methods   Tom Rini
• [U-Boot] [PATCH] arm: at91: snapper9260: Drop invalid CONFIG_SKIP_RELOCATE_UBOOT   Simon Glass
• [U-Boot] [PATCH] spi: Fix flag collision for SST_WP   Simon Glass
• [U-Boot] [PATCH v2] fs/ext4/ext4fs.c, fs/fs.c fs/fat/fat_write.c: Adjust 64bit math methods   Simon Glass
• [U-Boot] [PATCH V2] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Lubomir Popov
• [U-Boot] [PATCH V2] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Simon Glass
• [U-Boot] [PATCH 7/8] ARM: UniPhier: display model name if it is available in device tree   Simon Glass
• [U-Boot] [PATCH 2/8] ARM: UniPhier: add dummy gpio.h to enable CONFIG_OF_CONTROL   Simon Glass
• [U-Boot] [PATCH 2/8] ARM: UniPhier: add dummy gpio.h to enable CONFIG_OF_CONTROL   Simon Glass
• [U-Boot] [PATCH v2] fs/ext4/ext4fs.c, fs/fs.c fs/fat/fat_write.c: Adjust 64bit math methods   Tom Rini
• [U-Boot] [PATCH v4 1/3] dts: Bring in Chrome OS keyboard device tree definition   Simon Glass
• [U-Boot] [PATCH v4 2/3] tegra: dts: Sync tegra124.dtsi with linux kernel   Simon Glass
• [U-Boot] [PATCH v4 3/3] ARM: tegra: Add support for nyan-big board   Simon Glass
• [U-Boot] [PATCH 8/8] dm: core: abolish u-boot, dm-pre-reloc property   Simon Glass
• [U-Boot] [PATCH v3] fs/ext4/ext4fs.c, fs/fs.c fs/fat/fat_write.c: Adjust 64bit math methods   Tom Rini
• [U-Boot] [PATCH v3] fs/ext4/ext4fs.c, fs/fs.c fs/fat/fat_write.c: Adjust 64bit math methods   Simon Glass
• [U-Boot] [PATCH] sata: fix reset_sata for dwc_ahsata   Soeren Moch
• [U-Boot] Bare x86 support is merged to u-boot-x86   Simon Glass
• [U-Boot] [PATCH] sata: fix reset_sata for dwc_ahsata   Fabio Estevam
• [U-Boot] Bare x86 support is merged to u-boot-x86   Bin Meng
• [U-Boot] [U-Boot, 02/10] arm: s3c24xx: Fix incorrect CONFIG_SYS_S3C2410_NAND_HWECC name   Scott Wood
• [U-Boot] [U-Boot, 03/10] mtd: nand: s3c: Fix data type width in debug()   Scott Wood
• [U-Boot] [U-Boot,05/10] mtd: nand: s3c: Add S3C2440 specifics   Scott Wood
• [U-Boot] Bare x86 support is merged to u-boot-x86   Simon Glass
• [U-Boot] Export redesign   Martin Dorwig
• [U-Boot] [PATCH] sata: fix reset_sata for dwc_ahsata   Soeren Moch
• [U-Boot] [PATCH 1/1] driver/mtd: Fix IFC compilation warnings   Jaiprakash Singh
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] Bare x86 support is merged to u-boot-x86   Joakim Tjernlund
• [U-Boot] [U-Boot, v8, 2/6] fat: Prepare API change for files greater than 2GB   Jan Kiszka
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [PATCH v1 0/9] Add full DDR init for Marvell Armada-XP MV78xx0 (AXP)   Stefan Roese
• [U-Boot] [PATCH] sunxi: Align PSCI stack calculation to comment   Jan Kiszka
• [U-Boot] [PATCH v2] Export redesign   Martin Dorwig
• [U-Boot] [PATCH] sunxi: Align PSCI stack calculation to comment   Marc Zyngier
• [U-Boot] [PATCH v2] sata: fix reset_sata for dwc_ahsata   Soeren Moch
• [U-Boot] [PATCH] ftd_support: Fix regression causes by "fdt: Try to use fdt_address_cells()/fdt_size_cells()"   Hans de Goede
• [U-Boot] [PATCH] rtc: ds1307: add support for MCP7941x RTCs   Soeren Moch
• [U-Boot] [PATCH] sata: fix reset_sata for dwc_ahsata   Nikita Kiryanov
• [U-Boot] [PATCH v2] sata: fix reset_sata for dwc_ahsata   Nikita Kiryanov
• [U-Boot] [U-Boot, v8, 2/6] fat: Prepare API change for files greater than 2GB   Tom Rini
• [U-Boot] [U-Boot, v8, 2/6] fat: Prepare API change for files greater than 2GB   Jan Kiszka
• [U-Boot] [PATCH v2] arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)   Stefan Roese
• [U-Boot] [PATCH v2] arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)   Fabio Estevam
• [U-Boot] [PATCH v9 0/3] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
• [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH] ftd_support: Fix regression causes by "fdt: Try to use fdt_address_cells()/fdt_size_cells()"   Simon Glass
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Sjoerd Simons
• [U-Boot] [PATCH 7/8] ARM: UniPhier: display model name if it is available in device tree   Masahiro YAMADA
• [U-Boot] [PATCH 2/8] ARM: UniPhier: add dummy gpio.h to enable CONFIG_OF_CONTROL   Masahiro YAMADA
• [U-Boot] [PATCH 0/2 v2] No need for parade bridge on peach-pi   Sjoerd Simons
• [U-Boot] [PATCH 1/2 v2] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Sjoerd Simons
• [U-Boot] [PATCH 2/2 v2] exynos5420: fix compilation without parade video   Sjoerd Simons
• [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3   Jaehoon Chung
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Jaehoon Chung
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [PATCH] cros-ec-keyboard: Synchronize DT binding from linux   Sjoerd Simons
• [U-Boot] [PATCH v1] fdt: Allow non-FDT kernels to boot when CONFIG_OF_LIBFDT is defined   Simon Glass
• [U-Boot] [PATCH 7/8] ARM: UniPhier: display model name if it is available in device tree   Simon Glass
• [U-Boot] [PATCH 2/8] ARM: UniPhier: add dummy gpio.h to enable CONFIG_OF_CONTROL   Simon Glass
• [U-Boot] [PATCH] ftd_support: Fix regression causes by "fdt: Try to use fdt_address_cells()/fdt_size_cells()"   Simon Glass
• [U-Boot] [PATCH] fdt: remove fdtdec_get_alias_node() function   Simon Glass
• [U-Boot] Bare x86 support is merged to u-boot-x86   Simon Glass
• [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3   Sjoerd Simons
• [U-Boot] [PATCH] generic-board: show model name in board_init_f() too   Masahiro Yamada
• [U-Boot] Bare x86 support is merged to u-boot-x86   Joakim Tjernlund
• [U-Boot] [PATCH 1/8] ARM: UniPhier: do not compile platform data when CONFIG_OF_CONTROL=y   Masahiro YAMADA
• [U-Boot] [PATCH 2/8] ARM: UniPhier: add dummy gpio.h to enable CONFIG_OF_CONTROL   Masahiro YAMADA
• [U-Boot] [PATCH 3/8] ARM: UniPhier: add device tree sources   Masahiro YAMADA
• [U-Boot] [PATCH 4/8] serial: UniPhier: support OF configuration   Masahiro YAMADA
• [U-Boot] [PATCH 5/8] usb: UniPhier: support OF configuration   Masahiro YAMADA
• [U-Boot] [PATCH 6/8] ARM: UniPhier: enable Device Tree control   Masahiro YAMADA
• [U-Boot] [PATCH 8/8] ARM: UniPhier: move CONFIG_CMD_* and CONFIG_FIT* defines to defconfig   Masahiro YAMADA
• [U-Boot] Pull request: u-boot-uniphier/master   Masahiro YAMADA
• [U-Boot] Pull request: nand flash   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [PATCH] generic-board: show model name in board_init_f() too   Simon Glass
• [U-Boot] [PATCH 1/2] socfpga: add missing struct member fifo_triple_byte   Pavel Machek
• [U-Boot] [PATCH 2/2] socfpga: correctly increment freeze_controller_base address   Pavel Machek
• [U-Boot] [PATCH] tbs2910: fix lost characters on serial input   Soeren Moch
• [U-Boot] Bare x86 support is merged to u-boot-x86   Simon Glass
• [U-Boot] [PATCH v2] fdt: Allow non-FDT kernels to boot when CONFIG_OF_LIBFDT is defined   Suriyan Ramasami
• [U-Boot] [PATCH v1] fdt: Allow non-FDT kernels to boot when CONFIG_OF_LIBFDT is defined   Suriyan Ramasami
• [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3   Sjoerd Simons
• [U-Boot] [PATCH 1/2] config_fallbacks: Add a default entry for CONFIG_SYS_PBSIZE   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6sabre_common: Use the default CONFIG_SYS_PBSIZE   Fabio Estevam
• [U-Boot] [PATCH] arm: vf610: improve evaluation of reset source   Stefan Agner
• [U-Boot] [PATCH v2] arm: build arch memset/memcpy in Thumb2 mode   Stefan Agner
• [U-Boot] [PATCH] fdt: remove fdtdec_get_alias_node() function   Masahiro Yamada
• [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH 0/3] Kbuild: some trivial cleanups   Masahiro Yamada
• [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH 1/3] lib: bzip2: move bzip2 files to lib/bzip2/ directory   Masahiro Yamada
• [U-Boot] [PATCH 2/3] libfdt: descend from lib/ to lib/libfdt/   Masahiro Yamada
• [U-Boot] [PATCH 3/3] libfdt: move CONFIG_OF_LIBFDT and CONFIG_FIT to lib/Makefile   Masahiro Yamada
• [U-Boot] [OpenQuestion] stdint.h and inttypes.h in U-Boot ?   Masahiro Yamada
• [U-Boot] [PATCH] mtd/nand/vf610_nfc: Disable subpage writes   Sanchayan Maity
• [U-Boot] [OpenQuestion] stdint.h and inttypes.h in U-Boot ?   Simon Glass
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH v3 01/10] dm: i2c: Add a uclass for I2C   Simon Glass
• [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH] ftd_support: Fix regression causes by "fdt: Try to use fdt_address_cells()/fdt_size_cells()"   Jan Kiszka
• [U-Boot] [PATCH] ARM: UniPhier: remove Denali NAND controller fixup code   Masahiro Yamada
• [U-Boot] [PATCH] ftd_support: Fix regression causes by "fdt: Try to use fdt_address_cells()/fdt_size_cells()"   Masahiro Yamada
• [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3   Sjoerd Simons
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Sjoerd Simons
• [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3   Sjoerd Simons
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Lukasz Majewski
• [U-Boot] ARM: PSCI 0.1 vs 0.2   Jan Kiszka
• [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3   Jaehoon Chung
• [U-Boot] [PATCH 00/18] Support for eMMC partitioning and related fixes   Diego Santa Cruz
• [U-Boot] [PATCH 01/18] mmc: show hardware partition sizes in mmcinfo output   Diego Santa Cruz
• [U-Boot] [PATCH 02/18] mmc: extend mmcinfo to show enhanced partition attribute   Diego Santa Cruz
• [U-Boot] [PATCH 03/18] mmc: make eMMC general purpose partition numbering match spec   Diego Santa Cruz
• [U-Boot] [PATCH 04/18] mmc: skip mmcinfo partition info processing for eMMC < 4.41   Diego Santa Cruz
• [U-Boot] [PATCH 05/18] mmc: incomplete test to switch to high-capacity group size definitions   Diego Santa Cruz
• [U-Boot] [PATCH 06/18] mmc: computation of eMMC GP partition size was missing 512 KiB factor   Diego Santa Cruz
• [U-Boot] [PATCH 07/18] mmc: read the size of eMMC enhanced user data area   Diego Santa Cruz
• [U-Boot] [PATCH 08/18] mmc: display size and start of eMMC enhanced user data area in mmcinfo   Diego Santa Cruz
• [U-Boot] [PATCH 09/18] mmc: fix erase_grp_size computation with high-capacity size definition   Diego Santa Cruz
• [U-Boot] [PATCH 10/18] mmc: read the high capacity WP group size for eMMC   Diego Santa Cruz
• [U-Boot] [PATCH 11/18] mmc: show the erase group size and HC WP group size in mmcinfo output   Diego Santa Cruz
• [U-Boot] [PATCH 12/18] mmc: eMMC partitioning data is not effective till partitioning completed   Diego Santa Cruz
• [U-Boot] [PATCH 13/18] mmc: the ext_csd data may be used during init even if reading failed   Diego Santa Cruz
• [U-Boot] [PATCH 14/18] mmc: add API to do eMMC hardware partitioning   Diego Santa Cruz
• [U-Boot] [PATCH 15/18] mmc: add mmc hwpartition sub-command to do eMMC hardware partitioning   Diego Santa Cruz
• [U-Boot] [PATCH 16/18] mmc: extend the mmc hardware partitioning API with write reliability   Diego Santa Cruz
• [U-Boot] [PATCH 17/18] mmc: extend the mmc hwpartition sub-command to change write reliability   Diego Santa Cruz
• [U-Boot] [PATCH 18/18] mmc: extend mmcinfo output to show partition write reliability settings   Diego Santa Cruz
• [U-Boot] [PATCH 00/18] Support for eMMC partitioning and related fixes   Pantelis Antoniou
• [U-Boot] [PATCH 00/18] Support for eMMC partitioning and related fixes   Joakim Tjernlund
• [U-Boot] ARM: PSCI 0.1 vs 0.2   Marc Zyngier
• [U-Boot] [PATCH 16/18] mmc: extend the mmc hardware partitioning API with write reliability   Pantelis Antoniou
• [U-Boot] [PATCH 13/18] mmc: the ext_csd data may be used during init even if reading failed   Pantelis Antoniou
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Sjoerd Simons
• [U-Boot] ARM: PSCI 0.1 vs 0.2   Jan Kiszka
• [U-Boot] [PATCH 00/18] Support for eMMC partitioning and related fixes   Diego Santa Cruz
• [U-Boot] [PATCH 16/18] mmc: extend the mmc hardware partitioning API with write reliability   Diego Santa Cruz
• [U-Boot] [PATCH 00/18] Support for eMMC partitioning and related fixes   Diego Santa Cruz
• [U-Boot] [PATCH] mmc: exynos_dw-mmc: change debug message   Jaehoon Chung
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Javier Martinez Canillas
• [U-Boot] [PATCH] arm: exynos: fix the div value for set_mmc_clk   Jaehoon Chung
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Lukasz Majewski
• [U-Boot] [PATCH v2] fdt: Fix regression in fdt_pack_reg()   Hans de Goede
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Sjoerd Simons
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Lukasz Majewski
• [U-Boot] [PATCH 16/18] mmc: extend the mmc hardware partitioning API with write reliability   Pantelis Antoniou
• [U-Boot] [PATCH 16/18] mmc: extend the mmc hardware partitioning API with write reliability   Diego Santa Cruz
• [U-Boot] [PATCH 16/18] mmc: extend the mmc hardware partitioning API with write reliability   Pantelis Antoniou
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Sjoerd Simons
• [U-Boot] [PATCH 16/18] mmc: extend the mmc hardware partitioning API with write reliability   Diego Santa Cruz
• [U-Boot] [PATCH v2] fdt: Fix regression in fdt_pack_reg()   Masahiro YAMADA
• [U-Boot] [PATCH] imx: mx53loco: Add raw initrd support   Guillaume Gardet
• [U-Boot] [PATCH] imx: mx53loco: Add raw initrd support   Stefano Babic
• [U-Boot] [PATCH] Revert "ARM: SPL: do not set gd again"   Jeroen Hofstee
• [U-Boot] 425, Sorry, invalid address given   Gilles Chanteperdrix
• [U-Boot] 425, Sorry, invalid address given   Gilles Chanteperdrix
• [U-Boot] Attached DTB no longer supported u-boot.imx?   Bill Pringlemeir
• [U-Boot] Attached DTB no longer supported u-boot.imx?   Bill Pringlemeir
• [U-Boot] Attached DTB no longer supported u-boot.imx?   Tom Rini
• [U-Boot] [PATCH] dm_test: improve the appearance shown by "dm tree" command   Masahiro Yamada
• [U-Boot] [PATCH] kconfig: Fix warning "‘jump’ may be used uninitialized"   Masahiro Yamada
• [U-Boot] [PATCH v9 2/2] Odroid-XU3: Add documentation for Odroid-XU3   Lukasz Majewski
• [U-Boot] arm kirkwood pending patches   Luka Perkov
• [U-Boot] RFC Pin Configuration Device Tree Bindings for Altera Arria10 SOCFPGA   Matthew Gerlach
• [U-Boot] [PATCH v2] fdt: Fix regression in fdt_pack_reg()   Simon Glass
• [U-Boot] [PATCH] dm_test: improve the appearance shown by "dm tree" command   Simon Glass
• [U-Boot] [PATCH v2 1/3] lib: string: move strlcpy() to a common place   Simon Glass
• [U-Boot] [PATCH] dm_test: improve the appearance shown by "dm tree" command   Simon Glass
• [U-Boot] [PATCH v3 1/2] dm: rpi: Move serial to driver model   Stephen Warren
• [U-Boot] [PATCH v2] fdt: Allow non-FDT kernels to boot when CONFIG_OF_LIBFDT is defined   Simon Glass
• [U-Boot] [PATCH] ftd_support: Fix regression causes by "fdt: Try to use fdt_address_cells()/fdt_size_cells()"   Stephen Warren
• [U-Boot] [PATCH 1/2] ARM: rpi: rename rpi_b to rpi   Simon Glass
• [U-Boot] [PATCH 1/6] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define   Luka Perkov
• [U-Boot] [PATCH 2/6] kirkwood: dockstar: add CONFIG_SYS_GENERIC_BOARD define   Luka Perkov
• [U-Boot] [PATCH 3/6] kirkwood: goflexhome: add CONFIG_SYS_GENERIC_BOARD define   Luka Perkov
• [U-Boot] [PATCH 4/6] kirkwood: iconnect: add CONFIG_SYS_GENERIC_BOARD define   Luka Perkov
• [U-Boot] [PATCH 5/6] kirkwood: pogo_e02: add CONFIG_SYS_GENERIC_BOARD define   Luka Perkov
• [U-Boot] [PATCH 6/6] kirkwood: sheevaplug: add CONFIG_SYS_GENERIC_BOARD define   Luka Perkov
• [U-Boot] Please pull u-boot-fdt.git   Simon Glass
• [U-Boot] [PATCH V2 00/12] cleanup and refactor lcd.c   Nikita Kiryanov
• [U-Boot] [PATCH V2 01/12] lcd: remove CONFIG_SYS_INVERT_COLORS   Nikita Kiryanov
• [U-Boot] [PATCH V2 02/12] lcd: cleanup lcd_drawchars   Nikita Kiryanov
• [U-Boot] [PATCH V2 03/12] mpc8xx_lcd: get rid of CONFIG_EDT32F10   Nikita Kiryanov
• [U-Boot] [PATCH V2 04/12] lcd: remove LCD_MONOCHROME   Nikita Kiryanov
• [U-Boot] [PATCH V2 05/12] lcd: rename console_(row|col)   Nikita Kiryanov
• [U-Boot] [PATCH V2 06/12] lcd: replace CONSOLE_(ROWS|COLS) with variables   Nikita Kiryanov
• [U-Boot] [PATCH V2 07/12] lcd: expand console api   Nikita Kiryanov
• [U-Boot] [PATCH V2 08/12] lcd: get rid of COLOR_MASK   Nikita Kiryanov
• [U-Boot] [PATCH V2 09/12] lcd: introduce getters for bg/fg color   Nikita Kiryanov
• [U-Boot] [PATCH V2 10/12] lcd: make lcd_drawchars() independant of lcd_base   Nikita Kiryanov
• [U-Boot] [PATCH V2 11/12] lcd: refactor lcd console stuff into its own file   Nikita Kiryanov
• [U-Boot] [PATCH V2 12/12] lcd_console: remove unused defines   Nikita Kiryanov
• [U-Boot] [PATCH V2 00/12] cleanup and refactor lcd.c   Nikita Kiryanov
• [U-Boot] [PATCH V2 11/12] lcd: refactor lcd console stuff into its own file   Nikita Kiryanov
• [U-Boot] [PATCH 1/2 v2] Exynos5800: The Peach-Pi board does not have a Parade video bridge   Simon Glass
• [U-Boot] [PATCH] cros-ec-keyboard: Synchronize DT binding from linux   Simon Glass
• [U-Boot] [PATCH 2/2 v2] exynos5420: fix compilation without parade video   Simon Glass
• [U-Boot] [PATCH V2 05/12] lcd: rename console_(row|col)   Simon Glass
• [U-Boot] [PATCH V2 07/12] lcd: expand console api   Simon Glass
• [U-Boot] [PATCH V2 08/12] lcd: get rid of COLOR_MASK   Simon Glass
• [U-Boot] [PATCH V2 09/12] lcd: introduce getters for bg/fg color   Simon Glass
• [U-Boot] [PATCH V2 11/12] lcd: refactor lcd console stuff into its own file   Simon Glass
• [U-Boot] [PATCH V2 12/12] lcd_console: remove unused defines   Simon Glass
• [U-Boot] [PATCH v2] arm: build arch memset/memcpy in Thumb2 mode   Simon Glass
• [U-Boot] [PATCH v2] arm: build arch memset/memcpy in Thumb2 mode   Stefan Agner
• [U-Boot] [PATCH v2] Export redesign   Simon Glass