[U-Boot] [PATCH 05/33] x86: Remove board_early_init_r()

[Simon Glass]

This function is not needed. Remove it to improve the generic init sequence
slightly.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/x86/cpu/coreboot/coreboot.c    | 11 -----------
 board/google/chromebook_link/link.c |  5 -----
 common/board_r.c                    |  3 ---
 include/configs/chromebook_link.h   |  1 -
 4 files changed, 20 deletions(-)

diff --git a/arch/x86/cpu/coreboot/coreboot.c b/arch/x86/cpu/coreboot/coreboot.c
index d8ce768..e995e7f 100644
--- a/arch/x86/cpu/coreboot/coreboot.c
+++ b/arch/x86/cpu/coreboot/coreboot.c
@@ -39,17 +39,6 @@ int board_early_init_f(void)
 	return 0;
 }
 
-int board_early_init_r(void)
-{
-	/* CPU Speed to 100MHz */
-	gd->cpu_clk = 100000000;
-
-	/* Crystal is 33.000MHz */
-	gd->bus_clk = 33000000;
-
-	return 0;
-}
-
 int last_stage_init(void)
 {
 	if (gd->flags & GD_FLG_COLD_BOOT)
diff --git a/board/google/chromebook_link/link.c b/board/google/chromebook_link/link.c
index 88cee05..0a1ae61 100644
--- a/board/google/chromebook_link/link.c
+++ b/board/google/chromebook_link/link.c
@@ -12,11 +12,6 @@ int arch_early_init_r(void)
 	return 0;
 }
 
-int board_early_init_r(void)
-{
-	return 0;
-}
-
 static const struct pch_gpio_set1 pch_gpio_set1_mode = {
 	.gpio0 = GPIO_MODE_GPIO,  /* NMI_DBG# */
 	.gpio3 = GPIO_MODE_GPIO,  /* ALS_INT# */
diff --git a/common/board_r.c b/common/board_r.c
index 7c33900..8625a90 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -837,9 +837,6 @@ init_fnc_t init_sequence_r[] = {
 #ifdef CONFIG_CMD_KGDB
 	initr_kgdb,
 #endif
-#ifdef CONFIG_X86
-	board_early_init_r,
-#endif
 	interrupt_init,
 #if defined(CONFIG_ARM) || defined(CONFIG_x86)
 	initr_enable_interrupts,
diff --git a/include/configs/chromebook_link.h b/include/configs/chromebook_link.h
index 8caeca6..cd4a8a0 100644
--- a/include/configs/chromebook_link.h
+++ b/include/configs/chromebook_link.h
@@ -21,7 +21,6 @@
 #define CONFIG_DCACHE_RAM_MRC_VAR_SIZE		0x4000
 #define CONFIG_SYS_X86_START16			0xfffff800
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_DISPLAY_CPUINFO
 
 #define CONFIG_X86_RESET_VECTOR
-- 
2.1.0.rc2.206.gedb03e5