[U-Boot] Pull request: u-boot-uniphier/master
Masahiro YAMADA
yamada.m at jp.panasonic.com
Tue Nov 11 16:46:21 CET 2014
Hi Tom,
The following changes since commit 9906090f527153afddc5aa64d37cb5f89c6ee129:
Prepare v2015.01-rc1 (2014-11-10 16:25:29 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-uniphier.git master
for you to fetch changes up to b67932e3e72b6214cde75c7e2f796d0c70ff3ffb:
ARM: UniPhier: call pin_init() also in the normal boot (2014-11-12
00:31:01 +0900)
----------------------------------------------------------------
Masahiro Yamada (12):
serial: UniPhier: borrow macros from linux/serial_reg.h
ARM: UniPhier: reset on-board devices on start-up
ARM: UniPhier: move DDR related configuration to Kconfig
ARM: UniPhier: add EHCI host pin settings for PH1-Pro4
usb: add basic USB configs in Kconfig
ARM: UniPhier: add MIO register file
usb: UniPhier: add UniPhier on-chip EHCI host driver support
ARM: UniPhier: enable USB features
ARM: UniPhier: add set_pinsel macro for use in assembly code
ARM: UniPhier: decrease pre-reloc malloc area size
ARM: UniPhier: consolidate board_postclk_init() function
ARM: UniPhier: call pin_init() also in the normal boot
arch/arm/cpu/armv7/uniphier/Kconfig | 27
+++++++++++++++
arch/arm/cpu/armv7/uniphier/Makefile | 1 +
arch/arm/cpu/armv7/uniphier/{ph1-ld4 => }/board_postclk_init.c | 11 +++++--
arch/arm/cpu/armv7/uniphier/dram_init.c | 2 +-
arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 8 ++---
arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c | 13 ++++++++
arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c | 4 ---
arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 7 ++--
arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c | 39
----------------------
arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c | 7 ++++
arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c | 10 ++++++
arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c | 4 ---
arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 8 ++---
arch/arm/cpu/armv7/uniphier/ph1-sld8/board_postclk_init.c | 1 -
arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c | 13 ++++++++
arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c | 4 ---
arch/arm/cpu/armv7/uniphier/reset.c | 3 --
arch/arm/include/asm/arch-uniphier/ehci-uniphier.h | 33
+++++++++++++++++++
arch/arm/include/asm/arch-uniphier/mio-regs.h | 20
++++++++++++
arch/arm/include/asm/arch-uniphier/platdevice.h | 2 ++
arch/arm/include/asm/arch-uniphier/sg-regs.h | 13 +++++++-
configs/ph1_ld4_defconfig | 3 ++
configs/ph1_pro4_defconfig | 3 ++
configs/ph1_sld8_defconfig | 3 ++
drivers/serial/serial_uniphier.c | 15 ++-------
drivers/usb/Kconfig | 46
++++++++++++++++++++++++++
drivers/usb/host/Kconfig | 56
++++++++++++++++++++++++++++++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-uniphier.c | 39
++++++++++++++++++++++
include/configs/ph1_ld4.h | 2 --
include/configs/ph1_pro4.h | 2 --
include/configs/ph1_sld8.h | 2 --
include/configs/uniphier-common.h | 13 ++++++--
33 files changed, 321 insertions(+), 94 deletions(-)
rename arch/arm/cpu/armv7/uniphier/{ph1-ld4 => }/board_postclk_init.c (82%)
delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c
delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/board_postclk_init.c
create mode 100644 arch/arm/include/asm/arch-uniphier/ehci-uniphier.h
create mode 100644 arch/arm/include/asm/arch-uniphier/mio-regs.h
create mode 100644 drivers/usb/host/Kconfig
create mode 100644 drivers/usb/host/ehci-uniphier.c
--
Best Regards
Masahiro Yamada
More information about the U-Boot
mailing list