[U-Boot] [PATCH v8 2/3] Odroid-XU3: Add support for Odroid-XU3

[Przemyslaw Marczak]

Hello,

On 11/18/2014 02:57 AM, Hyungwon Hwang wrote:
> Dear Przemyslaw Marczak,
>
>>> +/*
>>> + * FIXME: The number of bank is actually 8. But there is no way to
>>> reserver the
>>> + * last 16 Mib in the last bank now. So I just excluded the last
>>> bank
>>> + * temporally.
>>> + */
>>
>> It's not prober solution, since non-dt kernel could get wrong DRAM
>> size. Please look at board/samsung/odroid/odroid.c - into function
>> exynos_init().
>>
>> The Odroid U3 has reserved the last 1MB of the last DRAM bank.
>
> I agree. It is a temporary solution, and it must be fixed soon. I see
> the exynos_init() function and adapt the method to fix the problem in
> Odroid XU3. But it did not work. Figuring out what is wrong, I found
> that the 2 lines of code in the exynos_init() to reserve the last 1MB
> does not affect the behavior of Odroid U3. Even after I commented out
> the codes, it works well. Is it a effective solution to reserve the
> memory? Is there anything else which I am missing?
>
> I really appreciate for your comment. Thanks.
>
> Best regards,
> Hyungwon Hwang.
>

Yes, I also checked now, that this doesn't work for your board.

On Odroid U3, there was a problem in the kernel - so dram size passed to 
the kernel is decreased by 1MB. It don't make a difference for the 
U-Boot if you don't touch this memory.

I can suppose that it depends on secure firmware.

If you plan to fix it in the future, then it's ok. In other way it will 
require some modification of board/samsung/common/board.c dram code.

You can leave it as it is, since I plan to send some patches from 
tizen.org for exynos ram init.
And it probably will fix this issue - if dts has decreased last bank 
size with the 16MiB.

Best regards,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com