[U-Boot] Attached DTB no longer supported u-boot.imx?
Bill Pringlemeir
bpringlemeir at nbsps.com
Sat Nov 29 00:52:04 CET 2014
I tried to update the new u-boot I get,
Bytes transferred = 3413041 (341431 hex)
Kernel image @ 0x86000000 [ 0x000000 - 0x33e150 ]
Could not find a valid device tree
The 'bootcmd' is,
tftp ${loadaddr} zImage.dtb; bootz ${loadaddr}
has the syntax changed and I am not up to date? I think I saw something
about an attached DTB not supported.
u-boot-imx$ git describe
v2009.08-18413-g5c84206
err, that is no good. I have 2a82ec77d27ef5f860a107c4b764643a655dceeb
as 'Prepare v2015.01-rc2' and I had to apply 5c84206 to compile with a
4.9 hard-float ARM compiler.
I pulled the main 'u-boot.git' and this does not happen.
u-boot$ git describe
v2015.01-rc2-87-g0f89149
It is '38cd8c4253013ccdd4052ee021f6066fe9a52551', with the same patch as
'pwclient git-am 415336'
Is the imx just using newer patches to be merged to the main tree and I
must switch to a detached DT? Or is there something else?
Thanks,
Bill.
More information about the U-Boot
mailing list