[U-Boot] [PATCH v4 0/4] add support for new arch stv0991

[Simon Glass]

Hi Vikas,

On 18 November 2014 01:30, Vikas Manocha <vikas.manocha at st.com> wrote:
> This patchset add support for new arch stv0991.
>
> Changes in v4:
> - rebased to current master
> - added maintainers info
>
> Changes in v3:
> - removed period from commit messages
>
> Changes in v2:
> - corrected files license to GPL-2.0+
> - replaced printf() usage with puts() for string print
> - sorted sourcing of board Kconfig
>
> Vikas Manocha (4):
>   stv0991: Add basic stv0991 architecture support
>   stv0991: enable ethernet support
>   stv0991: default + misc command configs enabled
>   stv0991: add maintainer information

Can you please look at using driver model for this board? It would be
particularly valuable since it looks like you are using the pl011 UART
which has not previously been tested with driver model (and it seems
you found some problems).

To do this you probably only need to adjust a few defines and add
platform data for serial. A patch for Raspberry Pi is here:

http://patchwork.ozlabs.org/patch/392180/

>
>  MAINTAINERS                                        |    6 +
>  arch/arm/Kconfig                                   |    5 +
>  arch/arm/cpu/armv7/stv0991/Makefile                |    9 ++
>  arch/arm/cpu/armv7/stv0991/clock.c                 |   41 +++++++
>  arch/arm/cpu/armv7/stv0991/lowlevel.S              |   12 ++
>  arch/arm/cpu/armv7/stv0991/pinmux.c                |   62 +++++++++++
>  arch/arm/cpu/armv7/stv0991/reset.c                 |   26 +++++
>  arch/arm/cpu/armv7/stv0991/timer.c                 |  114 +++++++++++++++++++
>  arch/arm/include/asm/arch-stv0991/gpio.h           |   22 ++++
>  arch/arm/include/asm/arch-stv0991/hardware.h       |   73 ++++++++++++
>  arch/arm/include/asm/arch-stv0991/stv0991_cgu.h    |  116 ++++++++++++++++++++
>  arch/arm/include/asm/arch-stv0991/stv0991_creg.h   |   95 ++++++++++++++++
>  arch/arm/include/asm/arch-stv0991/stv0991_defs.h   |   16 +++
>  arch/arm/include/asm/arch-stv0991/stv0991_gpt.h    |   43 ++++++++
>  arch/arm/include/asm/arch-stv0991/stv0991_periph.h |   44 ++++++++
>  arch/arm/include/asm/arch-stv0991/stv0991_wdru.h   |   28 +++++
>  board/st/stv0991/Kconfig                           |   23 ++++
>  board/st/stv0991/MAINTAINERS                       |    5 +
>  board/st/stv0991/Makefile                          |    8 ++
>  board/st/stv0991/stv0991.c                         |   91 +++++++++++++++
>  configs/stv0991_defconfig                          |    3 +
>  include/configs/stv0991.h                          |   88 +++++++++++++++
>  22 files changed, 930 insertions(+)
>  create mode 100644 arch/arm/cpu/armv7/stv0991/Makefile
>  create mode 100644 arch/arm/cpu/armv7/stv0991/clock.c
>  create mode 100644 arch/arm/cpu/armv7/stv0991/lowlevel.S
>  create mode 100644 arch/arm/cpu/armv7/stv0991/pinmux.c
>  create mode 100644 arch/arm/cpu/armv7/stv0991/reset.c
>  create mode 100644 arch/arm/cpu/armv7/stv0991/timer.c
>  create mode 100644 arch/arm/include/asm/arch-stv0991/gpio.h
>  create mode 100644 arch/arm/include/asm/arch-stv0991/hardware.h
>  create mode 100644 arch/arm/include/asm/arch-stv0991/stv0991_cgu.h
>  create mode 100644 arch/arm/include/asm/arch-stv0991/stv0991_creg.h
>  create mode 100644 arch/arm/include/asm/arch-stv0991/stv0991_defs.h
>  create mode 100644 arch/arm/include/asm/arch-stv0991/stv0991_gpt.h
>  create mode 100644 arch/arm/include/asm/arch-stv0991/stv0991_periph.h
>  create mode 100644 arch/arm/include/asm/arch-stv0991/stv0991_wdru.h
>  create mode 100644 board/st/stv0991/Kconfig
>  create mode 100644 board/st/stv0991/MAINTAINERS
>  create mode 100644 board/st/stv0991/Makefile
>  create mode 100644 board/st/stv0991/stv0991.c
>  create mode 100644 configs/stv0991_defconfig
>  create mode 100644 include/configs/stv0991.h

Regards,
Simon