[U-Boot] [PATCH v2 0/3] imx:mx6 add usb support

Peng Fan Peng.Fan at freescale.com
Tue Nov 4 08:49:59 CET 2014


Changes v2:
 - move pinmux setting into board_init
 - add otg polarity setting in board_ehci_hcd_init
 - Introduce a new weak function to give board a choice to decide the work mode
   of the otg port, since a otg port can also work in host mode without
   touch ID pin.

Peng Fan (3):
  usb:ehci-mx6 add board_ehci_usb_mode function
  imx:mx6sxsabresd add usb support
  imx:mx6slevk add usb support

 arch/arm/include/asm/arch-mx6/mx6sl_pins.h  |  5 +++
 board/freescale/mx6slevk/mx6slevk.c         | 51 +++++++++++++++++++++++++++++
 board/freescale/mx6sxsabresd/mx6sxsabresd.c | 51 +++++++++++++++++++++++++++++
 drivers/usb/host/ehci-mx6.c                 |  7 ++++
 include/configs/mx6slevk.h                  | 14 ++++++++
 include/configs/mx6sxsabresd.h              | 14 ++++++++
 6 files changed, 142 insertions(+)

-- 
1.8.4.5



More information about the U-Boot mailing list