[U-Boot] loadb problem. Hangs on START_CHAR

[bomellberg]

Some progress...

If I turn down the baud rate to 9600, as well as set a line delay of 100 ms,
the loadb transfer works, and I get 0x240 bytes of Hello World at the
address of my choice.

So, it seems to be some kind of baud rate missmatch between my board and the
PC. The console works fine in 115200 baud, so I'm a bit lost here. Does
kermit require slow transfers?

Feel free to chip in.

Thanks,

/Bo



--
View this message in context: http://u-boot.10912.n7.nabble.com/loadb-problem-Hangs-on-START-CHAR-tp195144p196499.html
Sent from the U-Boot mailing list archive at Nabble.com.