[U-Boot] [PATCH v2 0/9] dm: Introduce driver model for Atmel at91
Simon Glass
sjg at chromium.org
Thu Nov 13 03:44:17 CET 2014
Hi,
On 29 October 2014 13:08, Simon Glass <sjg at chromium.org> wrote:
> This series adds driver model support for serial and GPIO for the Atmel AT91
> series. The at91sam9260-based Snapper 9260 is converted over as an example.
>
> For both drivers the old behaviour is retained, so driver model becomes
> optional, not mandatory.
>
> This series is available at u-boot-dm/atmel-working.
Are there any comments on this version please? Otherwise I would like
to pull it into u-boot-dm and start sorting out the Kconfig things
(i.e. get rid of the CONFIG options for the 7-8 boards I have
touched).
>
> Changes in v2:
> - Use a text base of 0x21f00000
> - Remove unnecessary port number check
> - Use GPIO_PER_BANK instead of 32 in more places
> - Use PA/PB/PC instead of A/B/C for GPIO port names
> - Rename header to atmel_serial.h and use atmel instead of at91 throughout
> - Update platform data and header #include for the new driver name
> - Add new patch to add myself as maintainer for snapper9260
> - Add a patch to implement baud rate changes
>
> Simon Glass (9):
> dm: at91: Correct text base for snapper9260
> dm: at91: Move snapper9260 to generic baord
> dm: at91: Add driver model support for atmel GPIO driver
> dm: at91: Add platform data for GPIO on at91sam9260-based boards
> dm: at91: Refactor serial driver slightly for driver model
> dm: at91: Add driver model support for the serial driver
> dm: at91: Convert snapper9260 to use driver model
> dm: at91: Add myself as maintainer for snapper9260
> dm: serial: Support changing the baud rate
>
> arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 14 ++
> arch/arm/include/asm/arch-at91/at91sam9260.h | 4 +-
> arch/arm/include/asm/arch-at91/atmel_serial.h | 15 ++
> arch/arm/include/asm/arch-at91/gpio.h | 6 +
> board/bluewater/snapper9260/MAINTAINERS | 2 +-
> board/bluewater/snapper9260/snapper9260.c | 18 +-
> drivers/gpio/at91_gpio.c | 241 +++++++++++++++++-----
> drivers/serial/atmel_usart.c | 116 ++++++++++-
> drivers/serial/serial-uclass.c | 67 ++++++
> include/configs/snapper9260.h | 12 +-
> 10 files changed, 426 insertions(+), 69 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-at91/atmel_serial.h
>
> --
> 2.1.0.rc2.206.gedb03e5
>
Regards,
Simon
More information about the U-Boot
mailing list