[U-Boot] [PATCH v2 1/3] usb:ehci-mx6 add board_ehci_usb_mode function

[Marek Vasut]

On Tuesday, November 04, 2014 at 08:50:00 AM, Peng Fan wrote:
> Include a weak function board_ehci_usb_mode to gives board code
> a choice.

What choice?

> If the board want the otg port work in host mode but not
> device mode, this should be handled.

How?

Also, isn't usb_phy_enable() supposed to do exactly this kind of selection
between device and host mode ?

> Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
> Signed-off-by: Ye Li <B37916 at freescale.com>
> ---
> 
> Changes v2:
>  Introduce a new weak function to let board have a choice to decide which
> mode to work at.
> 
>  drivers/usb/host/ehci-mx6.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
> index 9ec5a0a..3662a80 100644
> --- a/drivers/usb/host/ehci-mx6.c
> +++ b/drivers/usb/host/ehci-mx6.c
> @@ -193,6 +193,11 @@ static void usb_oc_config(int index)
>  	__raw_writel(val, ctrl);
>  }
> 
> +int __weak board_ehci_usb_mode(int index, enum usb_init_type *type)
> +{
> +	return 0;
> +}
> +
>  int __weak board_ehci_hcd_init(int port)
>  {
>  	return 0;
> @@ -223,6 +228,8 @@ int ehci_hcd_init(int index, enum usb_init_type init,
>  	usb_internal_phy_clock_gate(index, 1);
>  	type = usb_phy_enable(index, ehci) ? USB_INIT_DEVICE : USB_INIT_HOST;
> 
> +	board_ehci_usb_mode(index, &type);
> +
>  	*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
>  	*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
>  			HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));

Best regards,
Marek Vasut