[U-Boot] [PATCH 1/4] tqma6: (cosmetic) remove CONFIG_FLASH_SECTOR_SIZE
Markus Niebel
list-09_u-boot at tqsc.de
Tue Nov 18 13:22:54 CET 2014
From: Markus Niebel <Markus.Niebel at tq-group.com>
This is nowhere documented and only used
by two other boards. Replace it with
TQMA6_SPI_FLASH_SECTOR_SIZE.
Signed-off-by: Markus Niebel <Markus.Niebel at tq-group.com>
---
include/configs/tqma6.h | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index c94eee1..a099687 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -68,6 +68,8 @@
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
+#define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K
+
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
@@ -275,12 +277,10 @@
#elif defined(CONFIG_TQMA6X_SPI_BOOT)
-#define CONFIG_FLASH_SECTOR_SIZE 0x10000
-
#define TQMA6_UBOOT_OFFSET 0x400
#define TQMA6_UBOOT_SECTOR_START 0x0
/* max u-boot size: 512k */
-#define TQMA6_UBOOT_SECTOR_SIZE CONFIG_FLASH_SECTOR_SIZE
+#define TQMA6_UBOOT_SECTOR_SIZE TQMA6_SPI_FLASH_SECTOR_SIZE
#define TQMA6_UBOOT_SECTOR_COUNT 0x8
#define TQMA6_UBOOT_SIZE (TQMA6_UBOOT_SECTOR_SIZE * \
TQMA6_UBOOT_SECTOR_COUNT)
@@ -288,7 +288,7 @@
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_OFFSET (TQMA6_UBOOT_SIZE)
-#define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE
+#define CONFIG_ENV_SECT_SIZE TQMA6_SPI_FLASH_SECTOR_SIZE
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
CONFIG_ENV_SECT_SIZE)
@@ -299,7 +299,7 @@
#define TQMA6_FDT_OFFSET (CONFIG_ENV_OFFSET_REDUND + \
CONFIG_ENV_SECT_SIZE)
-#define TQMA6_FDT_SECT_SIZE (CONFIG_FLASH_SECTOR_SIZE)
+#define TQMA6_FDT_SECT_SIZE (TQMA6_SPI_FLASH_SECTOR_SIZE)
#define TQMA6_FDT_SECTOR_START 0x0a /* 8 Sector u-boot, 2 Sector env */
#define TQMA6_FDT_SECTOR_COUNT 0x01
@@ -320,7 +320,7 @@
"setexpr blkc ${filesize} + " \
__stringify(TQMA6_UBOOT_OFFSET) "; " \
"setexpr size ${uboot_sectors} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"if itest ${blkc} <= ${size}; then " \
"sf probe; " \
"sf erase 0 ${size}; " \
@@ -332,9 +332,9 @@
"update_kernel=run kernel_name; if tftp ${kernel}; then " \
"if itest ${filesize} > 0; then " \
"setexpr size ${kernel_sectors} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"setexpr offset ${kernel_start} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"if itest ${filesize} <= ${size}; then " \
"sf probe; " \
"sf erase ${offset} ${size}; " \
@@ -346,9 +346,9 @@
"update_fdt=if tftp ${fdt_file}; then " \
"if itest ${filesize} > 0; then " \
"setexpr size ${fdt_sectors} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"setexpr offset ${fdt_start} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"if itest ${filesize} <= ${size}; then " \
"sf probe; " \
"sf erase ${offset} ${size}; " \
@@ -359,16 +359,16 @@
"setenv filesize 0; setenv size ; setenv offset\0" \
"loadimage=sf probe; " \
"setexpr size ${kernel_sectors} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"setexpr offset ${kernel_start} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"sf read ${loadaddr} ${offset} ${size}; " \
"setenv size ; setenv offset\0" \
"loadfdt=sf probe; " \
"setexpr size ${fdt_sectors} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"setexpr offset ${fdt_start} * " \
- __stringify(CONFIG_FLASH_SECTOR_SIZE)"; " \
+ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
"sf read ${${fdt_addr}} ${offset} ${size}; " \
"setenv size ; setenv offset\0" \
--
2.1.1
More information about the U-Boot
mailing list