[U-Boot] [PATCH v2 3/4] novena: Move the DCD settings to spl code

[Marek Vasut]

On Friday, November 14, 2014 at 12:37:01 PM, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> mx6sabresd_spl.cfg configures CCM registers, GPR registers and CCM_CCOSR.
> 
> Move the configuration to the spl code.
> 
> CCM_CCOSR setting is no longer required to get audio functionality in the
> kernel, so remove such setting.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Board still works.

Reviewed-by: Marek Vasut <marex at denx.de>

Best regards,
Marek Vasut