[U-Boot] [PATCH v2 3/4] novena: Move the DCD settings to spl code
Stefano Babic
sbabic at denx.de
Thu Nov 20 10:29:28 CET 2014
On 14/11/2014 21:07, Marek Vasut wrote:
> On Friday, November 14, 2014 at 12:37:01 PM, Fabio Estevam wrote:
>> From: Fabio Estevam <fabio.estevam at freescale.com>
>>
>> mx6sabresd_spl.cfg configures CCM registers, GPR registers and CCM_CCOSR.
>>
>> Move the configuration to the spl code.
>>
>> CCM_CCOSR setting is no longer required to get audio functionality in the
>> kernel, so remove such setting.
>>
>> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
>
> Board still works.
I wonder you can compile it, because crm_regs.h is missing in
novena_spl.c. I fix it myself, but I am wondering that it worked on your
side.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list