[U-Boot] arm: socfpga: set skew settings for ethernet phy
Wolfgang Denk
wd at denx.de
Thu Nov 13 13:20:52 CET 2014
Dear Pavel Machek,
In message <20141113120956.GB30779 at amd> you wrote:
>
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index 507b9a3..06a31b0 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -112,17 +112,46 @@ static int ksz9021_phy_extwrite(struct phy_device *phydev, int addr,
> return ksz9021_phy_extended_write(phydev, regnum, val);
> }
>
> +
> +
Please don't add excessive white space / blank lines.
> + printf("ksz9021: configuring\n");
> +
> + printf("Configuring PHY skew timing for %s\n",
> + phydev->drv->name);
Should these eventually be changed into debug() ?
Output gets really noisy otherwise.
> if (getenv("disable_giga"))
Should we not rather use the standard "hwconf" approach here?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There is a time in the tides of men, Which, taken at its flood, leads
on to success. On the other hand, don't count on it. - T. K. Lawson
More information about the U-Boot
mailing list