[U-Boot] [PATCHv4 6/6] ARM: ls102xa: Setting device's stream id for SMMUs.

Xiubo Li Li.Xiubo at freescale.com
Fri Nov 21 10:40:59 CET 2014 

LS1 has 4 SMMUs for address translation of the masters. All the
SMMUs' stream IDs are 8-bit. The address translation depends on the
stream ID of the incoming transaction.
Each master has unique stream ID assigned to it and is configurable
through SCFG registers. The stream ID for the masters is identical
and share the same register field of STREAM ID registers.

Signed-off-by: Xiubo Li <Li.Xiubo at freescale.com>
Acked-by: York Sun <yorksun at freescale.com>
---
 .../include/asm/arch-ls102xa/ls102xa_stream_id.h    | 17 +++++++++++++++++
 board/freescale/common/Makefile                     |  2 ++
 board/freescale/common/ls102xa_stream_id.c          | 18 ++++++++++++++++++
 board/freescale/ls1021aqds/ls1021aqds.c             | 21 +++++++++++++++++++++
 board/freescale/ls1021atwr/ls1021atwr.c             | 21 +++++++++++++++++++++
 include/configs/ls1021aqds.h                        |  2 ++
 include/configs/ls1021atwr.h                        |  2 ++
 7 files changed, 83 insertions(+)
 create mode 100644 arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
 create mode 100644 board/freescale/common/ls102xa_stream_id.c

diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
new file mode 100644
index 0000000..abd70fc
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __FSL_LS102XA_STREAM_ID_H_
+#define __FSL_LS102XA_STREAM_ID_H_
+
+struct smmu_stream_id {
+	uint16_t offset;
+	uint16_t stream_id;
+	char dev_name[32];
+};
+
+void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num);
+#endif
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index c009852..d676fcd 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -54,6 +54,8 @@ obj-$(CONFIG_VSC_CROSSBAR)    += vsc3316_3308.o
 obj-$(CONFIG_IDT8T49N222A)	+= idt8t49n222a_serdes_clk.o
 obj-$(CONFIG_ZM7300)		+= zm7300.o
 
+obj-$(CONFIG_LS102XA_STREAM_ID)	+= ls102xa_stream_id.o
+
 # deal with common files for P-series corenet based devices
 obj-$(CONFIG_P2041RDB)	+= p_corenet/
 obj-$(CONFIG_P3041DS)	+= p_corenet/
diff --git a/board/freescale/common/ls102xa_stream_id.c b/board/freescale/common/ls102xa_stream_id.c
new file mode 100644
index 0000000..6154c9c
--- /dev/null
+++ b/board/freescale/common/ls102xa_stream_id.c
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/ls102xa_stream_id.h>
+
+void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num)
+{
+	uint32_t *scfg = (uint32_t *)CONFIG_SYS_FSL_SCFG_ADDR;
+	int i;
+
+	for (i = 0; i < num; i++)
+		out_be32(scfg + id[i].offset, id[i].stream_id);
+}
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index c43f0c3..72c6544 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -11,6 +11,7 @@
 #include <asm/arch/ns_access.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/fsl_serdes.h>
+#include <asm/arch/ls102xa_stream_id.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <fsl_ifc.h>
@@ -310,6 +311,23 @@ static struct csu_ns_dev ns_dev[] = {
 };
 #endif
 
+struct smmu_stream_id dev_stream_id[] = {
+	{ 0x100, 0x01, "ETSEC MAC1" },
+	{ 0x104, 0x02, "ETSEC MAC2" },
+	{ 0x108, 0x03, "ETSEC MAC3" },
+	{ 0x10c, 0x04, "PEX1" },
+	{ 0x110, 0x05, "PEX2" },
+	{ 0x114, 0x06, "qDMA" },
+	{ 0x118, 0x07, "SATA" },
+	{ 0x11c, 0x08, "USB3" },
+	{ 0x120, 0x09, "QE" },
+	{ 0x124, 0x0a, "eSDHC" },
+	{ 0x128, 0x0b, "eMA" },
+	{ 0x14c, 0x0c, "2D-ACE" },
+	{ 0x150, 0x0d, "USB2" },
+	{ 0x18c, 0x0e, "DEBUG" },
+};
+
 int board_init(void)
 {
 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@@ -325,6 +343,9 @@ int board_init(void)
 	config_serdes_mux();
 #endif
 
+	ls102xa_config_smmu_stream_id(dev_stream_id,
+				      ARRAY_SIZE(dev_stream_id));
+
 #ifdef CONFIG_LS102XA_NS_ACCESS
 	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
 #endif
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index fff391c..e7d75de 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -11,6 +11,7 @@
 #include <asm/arch/ns_access.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/fsl_serdes.h>
+#include <asm/arch/ls102xa_stream_id.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <fsl_ifc.h>
@@ -358,6 +359,23 @@ static struct csu_ns_dev ns_dev[] = {
 };
 #endif
 
+struct smmu_stream_id dev_stream_id[] = {
+	{ 0x100, 0x01, "ETSEC MAC1" },
+	{ 0x104, 0x02, "ETSEC MAC2" },
+	{ 0x108, 0x03, "ETSEC MAC3" },
+	{ 0x10c, 0x04, "PEX1" },
+	{ 0x110, 0x05, "PEX2" },
+	{ 0x114, 0x06, "qDMA" },
+	{ 0x118, 0x07, "SATA" },
+	{ 0x11c, 0x08, "USB3" },
+	{ 0x120, 0x09, "QE" },
+	{ 0x124, 0x0a, "eSDHC" },
+	{ 0x128, 0x0b, "eMA" },
+	{ 0x14c, 0x0c, "2D-ACE" },
+	{ 0x150, 0x0d, "USB2" },
+	{ 0x18c, 0x0e, "DEBUG" },
+};
+
 int board_init(void)
 {
 #ifndef CONFIG_SYS_FSL_NO_SERDES
@@ -365,6 +383,9 @@ int board_init(void)
 	config_serdes_mux();
 #endif
 
+	ls102xa_config_smmu_stream_id(dev_stream_id,
+				      ARRAY_SIZE(dev_stream_id));
+
 #ifdef CONFIG_LS102XA_NS_ACCESS
 	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
 #endif
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index efb4b61..7468233 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -369,6 +369,8 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_LOAD_ADDR		0x82000000
 
+#define CONFIG_LS102XA_STREAM_ID
+
 /*
  * Stack sizes
  * The stack sizes are set up in start.S using the settings below
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index a36afdf..a2980aa 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -270,6 +270,8 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x82000000
 
+#define CONFIG_LS102XA_STREAM_ID
+
 /*
  * Stack sizes
  * The stack sizes are set up in start.S using the settings below
-- 
2.1.0.27.g96db324

More information about the U-Boot mailing list