[U-Boot] [PATCH v3 5/8] x86: ivybridge: Add northbridge init functions
Simon Glass
sjg at chromium.org
Tue Nov 25 05:18:18 CET 2014
Add init for the northbridge, another part of the platform controller hub.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v3: None
Changes in v2: None
arch/x86/cpu/ivybridge/Makefile | 1 +
arch/x86/cpu/ivybridge/bd82x6x.c | 2 +
arch/x86/cpu/ivybridge/northbridge.c | 188 ++++++++++++++++++++++
arch/x86/include/asm/arch-ivybridge/model_206ax.h | 4 +
arch/x86/include/asm/arch-ivybridge/sandybridge.h | 13 +-
5 files changed, 207 insertions(+), 1 deletion(-)
create mode 100644 arch/x86/cpu/ivybridge/northbridge.c
diff --git a/arch/x86/cpu/ivybridge/Makefile b/arch/x86/cpu/ivybridge/Makefile
index 95491b5..1296a78 100644
--- a/arch/x86/cpu/ivybridge/Makefile
+++ b/arch/x86/cpu/ivybridge/Makefile
@@ -13,6 +13,7 @@ obj-y += lpc.o
obj-y += me_status.o
obj-y += model_206ax.o
obj-y += microcode_intel.o
+obj-y += northbridge.o
obj-y += pch.o
obj-y += pci.o
obj-y += report_platform.o
diff --git a/arch/x86/cpu/ivybridge/bd82x6x.c b/arch/x86/cpu/ivybridge/bd82x6x.c
index 1a3c036..739f979 100644
--- a/arch/x86/cpu/ivybridge/bd82x6x.c
+++ b/arch/x86/cpu/ivybridge/bd82x6x.c
@@ -128,6 +128,8 @@ int bd82x6x_init(void)
bd82x6x_pci_init(PCH_DEV);
bd82x6x_sata_enable(PCH_SATA_DEV, blob, sata_node);
+ northbridge_enable(PCH_DEV);
+ northbridge_init(PCH_DEV);
return 0;
}
diff --git a/arch/x86/cpu/ivybridge/northbridge.c b/arch/x86/cpu/ivybridge/northbridge.c
new file mode 100644
index 0000000..c50b5de
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/northbridge.c
@@ -0,0 +1,188 @@
+/*
+ * From Coreboot northbridge/intel/sandybridge/northbridge.c
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2011 The Chromium Authors
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/msr.h>
+#include <asm/acpi.h>
+#include <asm/cpu.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/processor.h>
+#include <asm/arch/pch.h>
+#include <asm/arch/model_206ax.h>
+#include <asm/arch/sandybridge.h>
+
+static int bridge_revision_id = -1;
+
+int bridge_silicon_revision(void)
+{
+ if (bridge_revision_id < 0) {
+ struct cpuid_result result;
+ uint8_t stepping, bridge_id;
+ pci_dev_t dev;
+
+ result = cpuid(1);
+ stepping = result.eax & 0xf;
+ dev = PCI_BDF(0, 0, 0);
+ bridge_id = pci_read_config16(dev, PCI_DEVICE_ID) & 0xf0;
+ bridge_revision_id = bridge_id | stepping;
+ }
+
+ return bridge_revision_id;
+}
+
+/*
+ * Reserve everything between A segment and 1MB:
+ *
+ * 0xa0000 - 0xbffff: legacy VGA
+ * 0xc0000 - 0xcffff: VGA OPROM (needed by kernel)
+ * 0xe0000 - 0xfffff: SeaBIOS, if used, otherwise DMI
+ */
+static const int legacy_hole_base_k = 0xa0000 / 1024;
+static const int legacy_hole_size_k = 384;
+
+static int get_pcie_bar(u32 *base, u32 *len)
+{
+ pci_dev_t dev = PCI_BDF(0, 0, 0);
+ u32 pciexbar_reg;
+
+ *base = 0;
+ *len = 0;
+
+ pciexbar_reg = pci_read_config32(dev, PCIEXBAR);
+
+ if (!(pciexbar_reg & (1 << 0)))
+ return 0;
+
+ switch ((pciexbar_reg >> 1) & 3) {
+ case 0: /* 256MB */
+ *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
+ (1 << 28));
+ *len = 256 * 1024 * 1024;
+ return 1;
+ case 1: /* 128M */
+ *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
+ (1 << 28) | (1 << 27));
+ *len = 128 * 1024 * 1024;
+ return 1;
+ case 2: /* 64M */
+ *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
+ (1 << 28) | (1 << 27) | (1 << 26));
+ *len = 64 * 1024 * 1024;
+ return 1;
+ }
+
+ return 0;
+}
+
+static void add_fixed_resources(pci_dev_t dev, int index)
+{
+ u32 pcie_config_base, pcie_config_size;
+
+ if (get_pcie_bar(&pcie_config_base, &pcie_config_size)) {
+ debug("Adding PCIe config bar base=0x%08x size=0x%x\n",
+ pcie_config_base, pcie_config_size);
+ }
+}
+
+static void northbridge_dmi_init(pci_dev_t dev)
+{
+ /* Clear error status bits */
+ writel(0xffffffff, DMIBAR_REG(0x1c4));
+ writel(0xffffffff, DMIBAR_REG(0x1d0));
+
+ /* Steps prior to DMI ASPM */
+ if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) {
+ clrsetbits_le32(DMIBAR_REG(0x250), (1 << 22) | (1 << 20),
+ 1 << 21);
+ }
+
+ setbits_le32(DMIBAR_REG(0x238), 1 << 29);
+
+ if (bridge_silicon_revision() >= SNB_STEP_D0) {
+ setbits_le32(DMIBAR_REG(0x1f8), 1 << 16);
+ } else if (bridge_silicon_revision() >= SNB_STEP_D1) {
+ clrsetbits_le32(DMIBAR_REG(0x1f8), 1 << 26, 1 << 16);
+ setbits_le32(DMIBAR_REG(0x1fc), (1 << 12) | (1 << 23));
+ }
+
+ /* Enable ASPM on SNB link, should happen before PCH link */
+ if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB)
+ setbits_le32(DMIBAR_REG(0xd04), 1 << 4);
+
+ setbits_le32(DMIBAR_REG(0x88), (1 << 1) | (1 << 0));
+}
+
+void northbridge_init(pci_dev_t dev)
+{
+ u32 bridge_type;
+
+ add_fixed_resources(dev, 6);
+ northbridge_dmi_init(dev);
+
+ bridge_type = readl(MCHBAR_REG(0x5f10));
+ bridge_type &= ~0xff;
+
+ if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_IVB) {
+ /* Enable Power Aware Interrupt Routing - fixed priority */
+ clrsetbits_8(MCHBAR_REG(0x5418), 0xf, 0x4);
+
+ /* 30h for IvyBridge */
+ bridge_type |= 0x30;
+ } else {
+ /* 20h for Sandybridge */
+ bridge_type |= 0x20;
+ }
+ writel(bridge_type, MCHBAR_REG(0x5f10));
+
+ /*
+ * Set bit 0 of BIOS_RESET_CPL to indicate to the CPU
+ * that BIOS has initialized memory and power management
+ */
+ setbits_8(MCHBAR_REG(BIOS_RESET_CPL), 1);
+ debug("Set BIOS_RESET_CPL\n");
+
+ /* Configure turbo power limits 1ms after reset complete bit */
+ mdelay(1);
+ set_power_limits(28);
+
+ /*
+ * CPUs with configurable TDP also need power limits set
+ * in MCHBAR. Use same values from MSR_PKG_POWER_LIMIT.
+ */
+ if (cpu_config_tdp_levels()) {
+ msr_t msr = msr_read(MSR_PKG_POWER_LIMIT);
+
+ writel(msr.lo, MCHBAR_REG(0x59A0));
+ writel(msr.hi, MCHBAR_REG(0x59A4));
+ }
+
+ /* Set here before graphics PM init */
+ writel(0x00100001, MCHBAR_REG(0x5500));
+}
+
+void northbridge_enable(pci_dev_t dev)
+{
+#if CONFIG_HAVE_ACPI_RESUME
+ switch (pci_read_config32(dev, SKPAD)) {
+ case 0xcafebabe:
+ debug("Normal boot.\n");
+ apci_set_slp_type(0);
+ break;
+ case 0xcafed00d:
+ debug("S3 Resume.\n");
+ apci_set_slp_type(3);
+ break;
+ default:
+ debug("Unknown boot method, assuming normal.\n");
+ apci_set_slp_type(0);
+ break;
+ }
+#endif
+}
diff --git a/arch/x86/include/asm/arch-ivybridge/model_206ax.h b/arch/x86/include/asm/arch-ivybridge/model_206ax.h
index 8281d7a..7b4f2e7 100644
--- a/arch/x86/include/asm/arch-ivybridge/model_206ax.h
+++ b/arch/x86/include/asm/arch-ivybridge/model_206ax.h
@@ -79,4 +79,8 @@
#define PSS_LATENCY_TRANSITION 10
#define PSS_LATENCY_BUSMASTER 10
+/* Configure power limits for turbo mode */
+void set_power_limits(u8 power_limit_1_time);
+int cpu_config_tdp_levels(void);
+
#endif
diff --git a/arch/x86/include/asm/arch-ivybridge/sandybridge.h b/arch/x86/include/asm/arch-ivybridge/sandybridge.h
index 114ee19..cf7457f 100644
--- a/arch/x86/include/asm/arch-ivybridge/sandybridge.h
+++ b/arch/x86/include/asm/arch-ivybridge/sandybridge.h
@@ -97,11 +97,22 @@
/*
* MCHBAR
*/
-#define MCHBAR_REG(reg) (DEFAULT_RCBA + (reg))
+#define MCHBAR_REG(reg) (DEFAULT_MCHBAR + (reg))
#define SSKPD 0x5d14 /* 16bit (scratchpad) */
#define BIOS_RESET_CPL 0x5da8 /* 8bit */
+/*
+ * DMIBAR
+ */
+
+#define DMIBAR_REG(x) (DEFAULT_DMIBAR + x)
+
+int bridge_silicon_revision(void);
+
+void northbridge_enable(pci_dev_t dev);
+void northbridge_init(pci_dev_t dev);
+
void report_platform_info(void);
void sandybridge_early_init(int chipset_type);
--
2.1.0.rc2.206.gedb03e5
More information about the U-Boot
mailing list