[U-Boot] arm: socfpga: set skew settings for ethernet phy
dinguyen at opensource.altera.com
dinguyen at opensource.altera.com
Tue Nov 11 21:45:48 CET 2014
From: Dinh Nguyen <dinguyen at opensource.altera.com>
Set the PHY skew settings for the ethernet phy on the SOCFPGA devkit.
Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
Cc: Vince Bridgers <vbridger at opensource.altera.com>
Cc: Pavel Machek <pavel at denx.de>
Cc: Marek Vasut <marex at denx.de>
Cc: Tom Rini <trini at ti.com>
Cc: Albert Aribaud <albert.u.boot at aribaud.net>
Cc: Wolfgang Denk <wd at denx.de>
---
board/altera/socfpga/socfpga_cyclone5.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/board/altera/socfpga/socfpga_cyclone5.c b/board/altera/socfpga/socfpga_cyclone5.c
index 0f81d89..a2831c8 100644
--- a/board/altera/socfpga/socfpga_cyclone5.c
+++ b/board/altera/socfpga/socfpga_cyclone5.c
@@ -8,7 +8,9 @@
#include <asm/arch/reset_manager.h>
#include <asm/io.h>
+#include <micrel.h>
#include <netdev.h>
+#include <phy.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -39,3 +41,13 @@ int board_init(void)
return 0;
}
+
+int board_phy_config(struct phy_device *phydev)
+{
+ ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
+ 0x0);
+ ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
+ 0x0);
+ ksz9021_phy_extended_write(phydev, MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
+ 0xf0f0);
+}
--
2.0.3
More information about the U-Boot
mailing list