[U-Boot] [PATCH] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board

[Huan Wang]

Hi, york,

> -----Original Message-----
> From: York Sun [mailto:yorksun at freescale.com]
> Sent: Wednesday, November 26, 2014 5:23 AM
> To: Wang Huan-B18965; u-boot at lists.denx.de
> Cc: Jin Zhengxiong-R64188; Wang Huan-B18965
> Subject: Re: [PATCH] arm: ls102xa: Add QSPI boot support for
> LS1021AQDS/TWR board
> 
> On 10/24/2014 01:53 AM, Alison Wang wrote:
> > This patch adds QSPI boot support for LS1021AQDS/TWR board.
> > The QSPI boot image need to be programmed into the QSPI flash first.
> > Then the booting will start from QSPI memory space.
> >
> > This patch is based on the previous QSPI enabled patches.
> >
> > Signed-off-by: Alison Wang <alison.wang at freescale.com>
> > ---
> 
> Alison,
> 
> I lost track the "previous QSPI enabled patches". Can you point me a
> link?
>
[Alison Wang] I will resend that patch. The previous patch need to be rebased.


Best Regards,
Alison Wang