[U-Boot] [PATCH v2 4/8] imx6: add some flexibility for defining macros

[John Tobias]

iMX6 SabreSD has different stack address compare
to the default stack address defined on the file.

The CONFIG_SYS_TEXT_BASE is defined in mx6sabre_common.h which is
same address defined on file. At the same time to avoid compilation
warnings.
---
 include/configs/imx6_spl.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index 5a5f940..4ff37b3 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -29,7 +29,9 @@
 #define CONFIG_SPL_TEXT_BASE		0x00908000
 #define CONFIG_SPL_MAX_SIZE		0x10000
 #define CONFIG_SPL_START_S_PATH		"arch/arm/cpu/armv7"
+#ifndef CONFIG_SPL_STACK
 #define CONFIG_SPL_STACK		0x0091FFB8
+#endif
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -66,7 +68,9 @@
 #define CONFIG_SPL_BSS_MAX_SIZE		0x100000	/* 1 MB */
 #define CONFIG_SYS_SPL_MALLOC_START	0x18300000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x3200000	/* 50 MB */
+#ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE		0x17800000
 #endif
+#endif
 
 #endif
-- 
1.9.1