[U-Boot] [PATCH v3 0/2] Adds support for Exynos5422 odroid xu3 board

[Lukasz Majewski]

Hi Hyungwon,

> This is v3 of the patchset adding support Odroud XU3 board.
> 
> link to the previous version:
> https://www.mail-archive.com/u-boot@lists.denx.de/msg152275.html
> 
> This patchset fixes GPIO information of Exynos5420 which is needed to
> support Exynos5422 Odroid XU3 board. On the base of the fixes, this
> patchset adds support for Exynos5422 Odroid XU3 board. I have done
> this work on the patchset submitted by Akshay Saraswat.
> 
> link: https://patchwork.ozlabs.org/patch/400043/
> 
> Changes for v2:
> 	- Add a patch to add new common setup header file for Odroid
> X2/U3 and Odroid XU3
> Changes for v3:
> 	- Remove the patch which adds new common setup header file
> from v2
> 	- Remove the wrong patch to fix GPIO information of Exynos
> 5800
> 	- Remove unnecessary node from DT file
> 	- Remove unnecessary features from config file
> 	- Fix some trivial typos in comments
> 
> Hyungwon Hwang (2):
>   exynos5: fix GPIO information of exynos5420
>   Odroid-XU3: Add support for Odroid-XU3
> 
>  arch/arm/cpu/armv7/exynos/Kconfig       |   4 +
>  arch/arm/dts/Makefile                   |   3 +-
>  arch/arm/dts/exynos5422-odroidxu3.dts   |  58 ++++++++
>  arch/arm/include/asm/arch-exynos/cpu.h  |  11 +-
>  arch/arm/include/asm/arch-exynos/gpio.h | 232
> +++++++++++++++-----------------
> board/samsung/odroid-xu3/Kconfig        |  12 ++
> board/samsung/odroid-xu3/MAINTAINERS    |   6 +
> board/samsung/odroid-xu3/Makefile       |   7 +
> board/samsung/odroid-xu3/odroid-xu3.c   | 131 ++++++++++++++++++
> board/samsung/odroid-xu3/setup.h        |  95 +++++++++++++
> configs/odroid-xu3_defconfig            |   4 +
> include/configs/odroid_xu3.h            |  74 ++++++++++ 12 files
> changed, 510 insertions(+), 127 deletions(-) create mode 100644
> arch/arm/dts/exynos5422-odroidxu3.dts create mode 100644
> board/samsung/odroid-xu3/Kconfig create mode 100644
> board/samsung/odroid-xu3/MAINTAINERS create mode 100644
> board/samsung/odroid-xu3/Makefile create mode 100644
> board/samsung/odroid-xu3/odroid-xu3.c create mode 100644
> board/samsung/odroid-xu3/setup.h create mode 100644
> configs/odroid-xu3_defconfig create mode 100644
> include/configs/odroid_xu3.h
> 

I'd have appreciate if you added documentation entry similar to the one
at ./doc/README.odroid.

-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group