[U-Boot] [PATCH v2 28/33] x86: ivybridge: Add support for early GPIO init
Simon Glass
sjg at chromium.org
Tue Nov 11 02:00:45 CET 2014
When not relying on Coreboot for GPIO init the GPIOs must be set up
correctly. This is currently done statically through a rather ugly method.
As the GPIOs are figured out they can be moved to the device tree and set
up as needed rather than all at the start.
In this implementation, board files should call ich_gpio_set_gpio_map()
before the GPIO driver is used in order to provide the GPIO information.
We use the early PCI interface so that this driver can now be used before
relocation.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
arch/x86/include/asm/arch-coreboot/gpio.h | 5 --
arch/x86/include/asm/arch-ivybridge/pch.h | 16 ++++
arch/x86/include/asm/global_data.h | 1 +
arch/x86/include/asm/gpio.h | 142 +++++++++++++++++++++++++++++-
drivers/gpio/intel_ich6_gpio.c | 79 ++++++++++++++---
5 files changed, 227 insertions(+), 16 deletions(-)
diff --git a/arch/x86/include/asm/arch-coreboot/gpio.h b/arch/x86/include/asm/arch-coreboot/gpio.h
index 3ec1816..4951a8c 100644
--- a/arch/x86/include/asm/arch-coreboot/gpio.h
+++ b/arch/x86/include/asm/arch-coreboot/gpio.h
@@ -7,9 +7,4 @@
#ifndef _X86_ARCH_GPIO_H_
#define _X86_ARCH_GPIO_H_
-struct ich6_bank_platdata {
- uint32_t base_addr;
- const char *bank_name;
-};
-
#endif /* _X86_ARCH_GPIO_H_ */
diff --git a/arch/x86/include/asm/arch-ivybridge/pch.h b/arch/x86/include/asm/arch-ivybridge/pch.h
index 290a737..ae338e3 100644
--- a/arch/x86/include/asm/arch-ivybridge/pch.h
+++ b/arch/x86/include/asm/arch-ivybridge/pch.h
@@ -142,6 +142,22 @@
#define FD2 0x3428 /* 32bit */
#define CG 0x341c /* 32bit */
+/* ICH7 GPIOBASE */
+#define GPIO_USE_SEL 0x00
+#define GP_IO_SEL 0x04
+#define GP_LVL 0x0c
+#define GPO_BLINK 0x18
+#define GPI_INV 0x2c
+#define GPIO_USE_SEL2 0x30
+#define GP_IO_SEL2 0x34
+#define GP_LVL2 0x38
+#define GPIO_USE_SEL3 0x40
+#define GP_IO_SEL3 0x44
+#define GP_LVL3 0x48
+#define GP_RST_SEL1 0x60
+#define GP_RST_SEL2 0x64
+#define GP_RST_SEL3 0x68
+
/* ICH7 PMBASE */
#define PM1_STS 0x00
#define WAK_STS (1 << 15)
diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h
index ff9574c..4ea46d7 100644
--- a/arch/x86/include/asm/global_data.h
+++ b/arch/x86/include/asm/global_data.h
@@ -33,6 +33,7 @@ struct arch_global_data {
uint32_t bist; /* Built-in self test value */
struct pci_controller *hose; /* PCI hose for early use */
enum pei_boot_mode_t pei_boot_mode;
+ const struct pch_gpio_map *gpio_map; /* board GPIO map */
};
#endif
diff --git a/arch/x86/include/asm/gpio.h b/arch/x86/include/asm/gpio.h
index 8bda414..5540d42 100644
--- a/arch/x86/include/asm/gpio.h
+++ b/arch/x86/include/asm/gpio.h
@@ -1,12 +1,152 @@
/*
* Copyright (c) 2012, Google Inc. All rights reserved.
- * SPDX-License-Identifier: GPL-2.0+
+ * SPDX-License-Identifier: GPL-2.0
*/
#ifndef _X86_GPIO_H_
#define _X86_GPIO_H_
+#include <linux/compiler.h>
#include <asm/arch/gpio.h>
#include <asm-generic/gpio.h>
+struct ich6_bank_platdata {
+ uint32_t base_addr;
+ const char *bank_name;
+};
+
+#define GPIO_MODE_NATIVE 0
+#define GPIO_MODE_GPIO 1
+#define GPIO_MODE_NONE 1
+
+#define GPIO_DIR_OUTPUT 0
+#define GPIO_DIR_INPUT 1
+
+#define GPIO_NO_INVERT 0
+#define GPIO_INVERT 1
+
+#define GPIO_LEVEL_LOW 0
+#define GPIO_LEVEL_HIGH 1
+
+#define GPIO_NO_BLINK 0
+#define GPIO_BLINK 1
+
+#define GPIO_RESET_PWROK 0
+#define GPIO_RESET_RSMRST 1
+
+struct pch_gpio_set1 {
+ u32 gpio0:1;
+ u32 gpio1:1;
+ u32 gpio2:1;
+ u32 gpio3:1;
+ u32 gpio4:1;
+ u32 gpio5:1;
+ u32 gpio6:1;
+ u32 gpio7:1;
+ u32 gpio8:1;
+ u32 gpio9:1;
+ u32 gpio10:1;
+ u32 gpio11:1;
+ u32 gpio12:1;
+ u32 gpio13:1;
+ u32 gpio14:1;
+ u32 gpio15:1;
+ u32 gpio16:1;
+ u32 gpio17:1;
+ u32 gpio18:1;
+ u32 gpio19:1;
+ u32 gpio20:1;
+ u32 gpio21:1;
+ u32 gpio22:1;
+ u32 gpio23:1;
+ u32 gpio24:1;
+ u32 gpio25:1;
+ u32 gpio26:1;
+ u32 gpio27:1;
+ u32 gpio28:1;
+ u32 gpio29:1;
+ u32 gpio30:1;
+ u32 gpio31:1;
+} __packed;
+
+struct pch_gpio_set2 {
+ u32 gpio32:1;
+ u32 gpio33:1;
+ u32 gpio34:1;
+ u32 gpio35:1;
+ u32 gpio36:1;
+ u32 gpio37:1;
+ u32 gpio38:1;
+ u32 gpio39:1;
+ u32 gpio40:1;
+ u32 gpio41:1;
+ u32 gpio42:1;
+ u32 gpio43:1;
+ u32 gpio44:1;
+ u32 gpio45:1;
+ u32 gpio46:1;
+ u32 gpio47:1;
+ u32 gpio48:1;
+ u32 gpio49:1;
+ u32 gpio50:1;
+ u32 gpio51:1;
+ u32 gpio52:1;
+ u32 gpio53:1;
+ u32 gpio54:1;
+ u32 gpio55:1;
+ u32 gpio56:1;
+ u32 gpio57:1;
+ u32 gpio58:1;
+ u32 gpio59:1;
+ u32 gpio60:1;
+ u32 gpio61:1;
+ u32 gpio62:1;
+ u32 gpio63:1;
+} __packed;
+
+struct pch_gpio_set3 {
+ u32 gpio64:1;
+ u32 gpio65:1;
+ u32 gpio66:1;
+ u32 gpio67:1;
+ u32 gpio68:1;
+ u32 gpio69:1;
+ u32 gpio70:1;
+ u32 gpio71:1;
+ u32 gpio72:1;
+ u32 gpio73:1;
+ u32 gpio74:1;
+ u32 gpio75:1;
+} __packed;
+
+/*
+ * This hilariously complex structure came from Coreboot. The
+ * setup_pch_gpios() function uses it. It could be move to device tree, or
+ * adjust to use masks instead of bitfields.
+ */
+struct pch_gpio_map {
+ struct {
+ const struct pch_gpio_set1 *mode;
+ const struct pch_gpio_set1 *direction;
+ const struct pch_gpio_set1 *level;
+ const struct pch_gpio_set1 *reset;
+ const struct pch_gpio_set1 *invert;
+ const struct pch_gpio_set1 *blink;
+ } set1;
+ struct {
+ const struct pch_gpio_set2 *mode;
+ const struct pch_gpio_set2 *direction;
+ const struct pch_gpio_set2 *level;
+ const struct pch_gpio_set2 *reset;
+ } set2;
+ struct {
+ const struct pch_gpio_set3 *mode;
+ const struct pch_gpio_set3 *direction;
+ const struct pch_gpio_set3 *level;
+ const struct pch_gpio_set3 *reset;
+ } set3;
+};
+
+void ich_gpio_set_gpio_map(const struct pch_gpio_map *map);
+
#endif /* _X86_GPIO_H_ */
diff --git a/drivers/gpio/intel_ich6_gpio.c b/drivers/gpio/intel_ich6_gpio.c
index d3381b0..b095d17 100644
--- a/drivers/gpio/intel_ich6_gpio.c
+++ b/drivers/gpio/intel_ich6_gpio.c
@@ -33,6 +33,11 @@
#include <pci.h>
#include <asm/gpio.h>
#include <asm/io.h>
+#include <asm/pci.h>
+#ifdef CONFIG_X86_RESET_VECTOR
+#include <asm/arch/pch.h>
+#define SUPPORT_GPIO_SETUP
+#endif
#define GPIO_PER_BANK 32
@@ -46,6 +51,53 @@ struct ich6_bank_priv {
uint32_t lvl;
};
+#ifdef SUPPORT_GPIO_SETUP
+static void setup_pch_gpios(const struct pch_gpio_map *gpio)
+{
+ u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc;
+
+ /* GPIO Set 1 */
+ if (gpio->set1.level)
+ outl(*((u32 *)gpio->set1.level), gpiobase + GP_LVL);
+ if (gpio->set1.mode)
+ outl(*((u32 *)gpio->set1.mode), gpiobase + GPIO_USE_SEL);
+ if (gpio->set1.direction)
+ outl(*((u32 *)gpio->set1.direction), gpiobase + GP_IO_SEL);
+ if (gpio->set1.reset)
+ outl(*((u32 *)gpio->set1.reset), gpiobase + GP_RST_SEL1);
+ if (gpio->set1.invert)
+ outl(*((u32 *)gpio->set1.invert), gpiobase + GPI_INV);
+ if (gpio->set1.blink)
+ outl(*((u32 *)gpio->set1.blink), gpiobase + GPO_BLINK);
+
+ /* GPIO Set 2 */
+ if (gpio->set2.level)
+ outl(*((u32 *)gpio->set2.level), gpiobase + GP_LVL2);
+ if (gpio->set2.mode)
+ outl(*((u32 *)gpio->set2.mode), gpiobase + GPIO_USE_SEL2);
+ if (gpio->set2.direction)
+ outl(*((u32 *)gpio->set2.direction), gpiobase + GP_IO_SEL2);
+ if (gpio->set2.reset)
+ outl(*((u32 *)gpio->set2.reset), gpiobase + GP_RST_SEL2);
+
+ /* GPIO Set 3 */
+ if (gpio->set3.level)
+ outl(*((u32 *)gpio->set3.level), gpiobase + GP_LVL3);
+ if (gpio->set3.mode)
+ outl(*((u32 *)gpio->set3.mode), gpiobase + GPIO_USE_SEL3);
+ if (gpio->set3.direction)
+ outl(*((u32 *)gpio->set3.direction), gpiobase + GP_IO_SEL3);
+ if (gpio->set3.reset)
+ outl(*((u32 *)gpio->set3.reset), gpiobase + GP_RST_SEL3);
+}
+
+/* TODO: Move this to device tree, or platform data */
+void ich_gpio_set_gpio_map(const struct pch_gpio_map *map)
+{
+ gd->arch.gpio_map = map;
+}
+#endif /* SUPPORT_GPIO_SETUP */
+
static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
{
struct ich6_bank_platdata *plat = dev_get_platdata(dev);
@@ -60,13 +112,13 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
pci_dev = PCI_BDF(0, 0x1f, 0);
/* Is the device present? */
- pci_read_config_word(pci_dev, PCI_VENDOR_ID, &tmpword);
+ tmpword = pci_read_config16(pci_dev, PCI_VENDOR_ID);
if (tmpword != PCI_VENDOR_ID_INTEL) {
debug("%s: wrong VendorID\n", __func__);
return -ENODEV;
}
- pci_read_config_word(pci_dev, PCI_DEVICE_ID, &tmpword);
+ tmpword = pci_read_config16(pci_dev, PCI_DEVICE_ID);
debug("Found %04x:%04x\n", PCI_VENDOR_ID_INTEL, tmpword);
/*
* We'd like to validate the Device ID too, but pretty much any
@@ -76,34 +128,34 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
*/
/* I/O should already be enabled (it's a RO bit). */
- pci_read_config_word(pci_dev, PCI_COMMAND, &tmpword);
+ tmpword = pci_read_config16(pci_dev, PCI_COMMAND);
if (!(tmpword & PCI_COMMAND_IO)) {
debug("%s: device IO not enabled\n", __func__);
return -ENODEV;
}
/* Header Type must be normal (bits 6-0 only; see spec.) */
- pci_read_config_byte(pci_dev, PCI_HEADER_TYPE, &tmpbyte);
+ tmpbyte = pci_read_config8(pci_dev, PCI_HEADER_TYPE);
if ((tmpbyte & 0x7f) != PCI_HEADER_TYPE_NORMAL) {
debug("%s: invalid Header type\n", __func__);
return -ENODEV;
}
/* Base Class must be a bridge device */
- pci_read_config_byte(pci_dev, PCI_CLASS_CODE, &tmpbyte);
+ tmpbyte = pci_read_config8(pci_dev, PCI_CLASS_CODE);
if (tmpbyte != PCI_CLASS_CODE_BRIDGE) {
debug("%s: invalid class\n", __func__);
return -ENODEV;
}
/* Sub Class must be ISA */
- pci_read_config_byte(pci_dev, PCI_CLASS_SUB_CODE, &tmpbyte);
+ tmpbyte = pci_read_config8(pci_dev, PCI_CLASS_SUB_CODE);
if (tmpbyte != PCI_CLASS_SUB_CODE_BRIDGE_ISA) {
debug("%s: invalid subclass\n", __func__);
return -ENODEV;
}
/* Programming Interface must be 0x00 (no others exist) */
- pci_read_config_byte(pci_dev, PCI_CLASS_PROG, &tmpbyte);
+ tmpbyte = pci_read_config8(pci_dev, PCI_CLASS_PROG);
if (tmpbyte != 0x00) {
debug("%s: invalid interface type\n", __func__);
return -ENODEV;
@@ -114,7 +166,7 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
* that it was unused (or undocumented). Check that it looks
* okay: not all ones or zeros, and mapped to I/O space (bit 0).
*/
- pci_read_config_dword(pci_dev, PCI_CFG_GPIOBASE, &tmplong);
+ tmplong = pci_read_config32(pci_dev, PCI_CFG_GPIOBASE);
if (tmplong == 0x00000000 || tmplong == 0xffffffff ||
!(tmplong & 0x00000001)) {
debug("%s: unexpected GPIOBASE value\n", __func__);
@@ -140,12 +192,18 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
return 0;
}
-int ich6_gpio_probe(struct udevice *dev)
+static int ich6_gpio_probe(struct udevice *dev)
{
struct ich6_bank_platdata *plat = dev_get_platdata(dev);
struct gpio_dev_priv *uc_priv = dev->uclass_priv;
struct ich6_bank_priv *bank = dev_get_priv(dev);
+#ifdef SUPPORT_GPIO_SETUP
+ if (gd->arch.gpio_map) {
+ setup_pch_gpios(gd->arch.gpio_map);
+ gd->arch.gpio_map = NULL;
+ }
+#endif
uc_priv->gpio_count = GPIO_PER_BANK;
uc_priv->bank_name = plat->bank_name;
bank->use_sel = plat->base_addr;
@@ -155,7 +213,8 @@ int ich6_gpio_probe(struct udevice *dev)
return 0;
}
-int ich6_gpio_request(struct udevice *dev, unsigned offset, const char *label)
+static int ich6_gpio_request(struct udevice *dev, unsigned offset,
+ const char *label)
{
struct ich6_bank_priv *bank = dev_get_priv(dev);
u32 tmplong;
--
2.1.0.rc2.206.gedb03e5
More information about the U-Boot
mailing list