[U-Boot] [PATCH] power: LP8720 regulator support

Tom Rini trini at ti.com
Tue Nov 4 16:58:06 CET 2014


On Sat, Nov 01, 2014 at 12:01:37PM +0100, Paul Kocialkowski wrote:
> Le mardi 28 octobre 2014 à 18:32 +0100, Paul Kocialkowski a écrit :
> > This adds support for the LP8720 i2c regulator, as found in e.g. the LG
> > Optimus Black (P970), codename sniper. This code supports setting up and
> > enabling one of the 5 LDOs that the IC provides.
> > Other more advanced features are unsupported.
> > 
> > Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
> > ---
> >  drivers/power/Makefile |    1 +
> >  drivers/power/lp8720.c |  107 ++++++++++++++++++++++++++++++++++++++++++++++++
> >  include/lp8720.h       |   93 +++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 201 insertions(+)
> >  create mode 100644 drivers/power/lp8720.c
> >  create mode 100644 include/lp8720.h
> > 
> > diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> > index dc64e4d..65be5a0 100644
> > --- a/drivers/power/Makefile
> > +++ b/drivers/power/Makefile
> > @@ -9,6 +9,7 @@ obj-$(CONFIG_AXP152_POWER)	+= axp152.o
> >  obj-$(CONFIG_AXP209_POWER)	+= axp209.o
> >  obj-$(CONFIG_EXYNOS_TMU)	+= exynos-tmu.o
> >  obj-$(CONFIG_FTPMU010_POWER)	+= ftpmu010.o
> > +obj-$(CONFIG_LP8720_POWER)	+= lp8720.o
> >  obj-$(CONFIG_TPS6586X_POWER)	+= tps6586x.o
> >  obj-$(CONFIG_TWL4030_POWER)	+= twl4030.o
> >  obj-$(CONFIG_TWL6030_POWER)	+= twl6030.o
> > diff --git a/drivers/power/lp8720.c b/drivers/power/lp8720.c
> > new file mode 100644
> > index 0000000..ac7fc11
> > --- /dev/null
> > +++ b/drivers/power/lp8720.c
> > @@ -0,0 +1,107 @@
> > +/*
> > + * Copyright (C) 2014 Paul Kocialkowski <contact at paulk.fr>
> > + *
> > + * SPDX-License-Identifier:	GPL-2.0+
> > + */
> > +
> > +#include <common.h>
> > +#include <i2c.h>
> > +#include <asm/gpio.h>
> > +#include <lp8720.h>
> > +
> > +static struct lp8720_info lp8720_info;
> > +
> > +static int lp8720_write(u8 reg, u8 val)
> > +{
> > +	return i2c_write(lp8720_info.chip_idsel, reg, 1, &val, 1);
> > +}
> > +
> > +static int lp8720_read(u8 reg, u8 *val)
> > +{
> > +	return i2c_read(lp8720_info.chip_idsel, reg, 1, val, 1);
> > +}
> 
> Should I ifdef for I2C and GPIO support? It seems that GPIO support only
> has board-sepcific config options, so this may be hard. There is
> CONFIG_DM_GPIO for driver model, but it is apparently not always used,
> especially not on SPL.

Don't code for what you can't test.  Which way are you using this on the
Optimus?  And in general, any comments here Przemyslaw?  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141104/7e48030e/attachment.pgp>


More information about the U-Boot mailing list