[U-Boot] [PATCH] gw_ventana: Use the generic spl_sd.cfg

Fabio Estevam festevam at gmail.com
Thu Nov 20 16:17:56 CET 2014


From: Fabio Estevam <fabio.estevam at freescale.com>

gw_ventana can boot from SPI or NAND and both of these interfaces boot from
the same 0x400 offset.

This means that we could simplify the code and replace the custom gw_ventana.cfg
with the generic spl_sd.cfg, as it provides the same boot offset of 0x400.

Cc: Tim Harvey <tharvey at gateworks.com>
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 board/gateworks/gw_ventana/gw_ventana.cfg | 23 -----------------------
 configs/gwventana_defconfig               |  2 +-
 2 files changed, 1 insertion(+), 24 deletions(-)
 delete mode 100644 board/gateworks/gw_ventana/gw_ventana.cfg

diff --git a/board/gateworks/gw_ventana/gw_ventana.cfg b/board/gateworks/gw_ventana/gw_ventana.cfg
deleted file mode 100644
index dd8aa61..0000000
--- a/board/gateworks/gw_ventana/gw_ventana.cfg
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2013 Gateworks Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/* image version */
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * spi, sd, nand, sata
- */
-#ifdef CONFIG_SPI_FLASH
-BOOT_FROM      spi
-#else
-BOOT_FROM      nand
-#endif
diff --git a/configs/gwventana_defconfig b/configs/gwventana_defconfig
index f185329..4cddbdd 100644
--- a/configs/gwventana_defconfig
+++ b/configs/gwventana_defconfig
@@ -1,4 +1,4 @@
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6QDL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_GW_VENTANA=y
-- 
1.9.1



More information about the U-Boot mailing list