[U-Boot] [PATCH 4/4] arm: rmobile: gose: Remove dram_init_banksize function
Nobuhiro Iwamatsu
nobuhiro.iwamatsu.yj at renesas.com
Mon Nov 17 05:00:45 CET 2014
Gose board is defined CONFIG_SYS_SDRAM_BASE, and this can use a basic function of
dram_init_banksize instead.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj at renesas.com>
---
board/renesas/gose/gose.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/board/renesas/gose/gose.c b/board/renesas/gose/gose.c
index 2cef701..715fba0 100644
--- a/board/renesas/gose/gose.c
+++ b/board/renesas/gose/gose.c
@@ -93,7 +93,7 @@ void arch_preboot_os(void)
int board_init(void)
{
/* adress of boot parameters */
- gd->bd->bi_boot_params = GOSE_SDRAM_BASE + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
/* Init PFC controller */
r8a7793_pinmux_init();
@@ -161,12 +161,6 @@ const struct rmobile_sysinfo sysinfo = {
CONFIG_RMOBILE_BOARD_STRING
};
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = GOSE_SDRAM_BASE;
- gd->bd->bi_dram[0].size = GOSE_SDRAM_SIZE;
-}
-
void reset_cpu(ulong addr)
{
u8 val;
--
2.1.1
More information about the U-Boot
mailing list