[U-Boot] [PATCH 3/4] arm: rmobile: lager: Remove dram_init_banksize function

[Nobuhiro Iwamatsu]

Lager board is defined CONFIG_SYS_SDRAM_BASE, and this can use a basic function of
dram_init_banksize instead.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj at renesas.com>
---
 board/renesas/lager/lager.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c
index 99a298a..93273b2 100644
--- a/board/renesas/lager/lager.c
+++ b/board/renesas/lager/lager.c
@@ -93,7 +93,7 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_init(void)
 {
 	/* adress of boot parameters */
-	gd->bd->bi_boot_params = LAGER_SDRAM_BASE + 0x100;
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
 	/* Init PFC controller */
 	r8a7790_pinmux_init();
@@ -174,12 +174,6 @@ const struct rmobile_sysinfo sysinfo = {
 	CONFIG_RMOBILE_BOARD_STRING
 };
 
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = LAGER_SDRAM_BASE;
-	gd->bd->bi_dram[0].size = LAGER_SDRAM_SIZE;
-}
-
 void reset_cpu(ulong addr)
 {
 	u8 val;
-- 
2.1.1