[U-Boot] [PATCH v2 0/3] imx:mx6 add usb support
Peng Fan
B51431 at freescale.com
Tue Nov 4 13:05:44 CET 2014
在 11/4/2014 6:31 PM, Marek Vasut 写道:
> On Tuesday, November 04, 2014 at 08:49:59 AM, Peng Fan wrote:
>
> So uh, what exactly does this patchset do ? It's not clear at all from the
> subject and any description is completely missing.
>
> To my knowledge, i.MX6 already does have USB support in U-Boot, so the subject
> is misleading as well.
mx6sxsasbresd board and mx6slevk board does not have board level support
for usb. This patchset is mainly to add pinmux and implement
board_ehci_hcd_init and board_echi_power and add USB CONFIG in header
file to make usb work fine.
I'll send another patch for review, if "usb:ehci-mx6 add
board_ehci_usb_mode function" is fine.
>
>> Changes v2:
>> - move pinmux setting into board_init
>> - add otg polarity setting in board_ehci_hcd_init
>> - Introduce a new weak function to give board a choice to decide the work
>> mode of the otg port, since a otg port can also work in host mode without
>> touch ID pin.
>>
>> Peng Fan (3):
>> usb:ehci-mx6 add board_ehci_usb_mode function
>> imx:mx6sxsabresd add usb support
>> imx:mx6slevk add usb support
>>
>> arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 5 +++
>> board/freescale/mx6slevk/mx6slevk.c | 51
>> +++++++++++++++++++++++++++++ board/freescale/mx6sxsabresd/mx6sxsabresd.c
>> | 51 +++++++++++++++++++++++++++++ drivers/usb/host/ehci-mx6.c
>> | 7 ++++
>> include/configs/mx6slevk.h | 14 ++++++++
>> include/configs/mx6sxsabresd.h | 14 ++++++++
>> 6 files changed, 142 insertions(+)
>
> Best regards,
> Marek Vasut
>
Regards,
Peng.
More information about the U-Boot
mailing list