[U-Boot] [PATCHv4 0/6] ls102xa: HYP/non-sec: for ls102xa.
Xiubo Li
Li.Xiubo at freescale.com
Fri Nov 21 10:40:53 CET 2014
Change for V4:
- Split V3's 3/5 patch in two.
- Add a strong version of smp_kick_all_cpus().
Change for V3:
- Fixed the language in commit message.
Change for V2:
- All the registers were defined as a struct, here use it.
- Used CONFIG_PEN_ADDR_BIG_ENDIAN instead of CONFIG_SOC_BIG_ENDIAN.
Xiubo Li (6):
ARM: HYP/non-sec: add the pen address BE mode support.
ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.
ls1021a: adding a secondary core boot address and kick functions
ls102xa: changing a few targets' configurations.
ARM: ls102xa: allow all the peripheral access permission as R/W.
ARM: ls102xa: Setting device's stream id for SMMUs.
arch/arm/cpu/armv7/ls102xa/cpu.c | 18 ++++
arch/arm/cpu/armv7/nonsec_virt.S | 7 +-
arch/arm/include/asm/arch-ls102xa/config.h | 3 +
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 3 +
.../include/asm/arch-ls102xa/ls102xa_stream_id.h | 17 +++
arch/arm/include/asm/arch-ls102xa/ns_access.h | 118 +++++++++++++++++++++
board/freescale/common/Makefile | 4 +
board/freescale/common/ls102xa_stream_id.c | 18 ++++
board/freescale/common/ns_access.c | 30 ++++++
board/freescale/ls1021aqds/ls1021aqds.c | 113 ++++++++++++++++++++
board/freescale/ls1021atwr/ls1021atwr.c | 112 +++++++++++++++++++
include/configs/ls1021aqds.h | 10 ++
include/configs/ls1021atwr.h | 10 ++
include/configs/sun7i.h | 1 +
14 files changed, 462 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/ns_access.h
create mode 100644 board/freescale/common/ls102xa_stream_id.c
create mode 100644 board/freescale/common/ns_access.c
--
2.1.0.27.g96db324
More information about the U-Boot
mailing list